Twist Drill — Type N, 11.3 mm, 135° point, Short HSS‑G, Bright Finished, DIN 338 (MetavCUT)

The Twist Drill is a short Type N drill designed for precision metalworking with Drilling Machine applications and hardened materials.

• Short design for high stability
• Ground HSS‑G for precise, clean holes
• 135° point angle suited for hard metals
• Conforms to DIN 338 for short twist drills
• Fully ground shank for reliable clamping

Short HSS‑G construction delivers faster, cleaner drilling

A short, fully ground HSS‑G Twist Drill reduces overhang and increases rigidity, which directly improves runout and hole accuracy. The ground geometry produces very sharp cutting edges and a high concentricity that yields clean bores in metal; in practice this can mean up to 40% faster drilling and 50% less feed force compared with conventional HSS drills. This construction makes the tool particularly effective for demanding machining tasks where precision and tool life matter.

Designed for metal, hardened materials and machine use

With a 135° point angle, the drill penetrates harder materials more effectively and reduces initial skidding when starting the hole. The Type N normal spiral geometry is optimised for metalwork and performs well in Alloyed and Unalloyed Steel, Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and Hard Plastics. Use on stationary or moving machine tools with appropriate coolant to maintain cutting edge life and hole quality.

Stability and handling tailored to workshop demands

The shorter overall and spiral length reduces bending moments, improving stability during operation and minimising chatter on smaller machines or manual setups. A fully ground shank ensures secure clamping in the chuck and consistent concentricity. This combination suits workshops and professional users who prioritise repeatable accuracy and reduced rework, especially when working with tight tolerances.

Conformance, tip geometry and recommended practice

Manufactured to DIN 338 for short twist drills, this Type N Twist Drill follows standardised dimensions and quality benchmarks for short cylinder‑shank tools. Ground (HSS‑G) drills are typically sharper and provide better surface finish but can be more brittle than rolled variants; consequently, they are best used with adequate cooling and on stable machines. The Type N spiral is the classic metal drill geometry and should be selected when a robust, general‑purpose metalworking drill is required.

Strong recommendation: Choose MetavCUT precision Twist Drills for demanding metalwork — METAV Werkzeuge provides expert advice and comprehensive support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271

Technical Data

• Designation: Twist Drill
• Brand: MetavCUT
• SKU: 45113-FDA
• Diameter: 11.3 mm
• Point angle: 135°
• Type: Type N
• Execution: Short
• Colour/Finish: Bright finished
• Shaft finish: Fully ground
• Spiral length: 94 mm
• Overall length: 142 mm
• Material: HSS-G
• Standard: DIN 338
• Application: Drills for metal
• For use with: Drilling Machine
• Model series: Standard Line
• Packaging unit: 5
• Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What is the best use for the MetavCUT Twist Drill Type N?
The MetavCUT Twist Drill Type N is primarily intended for metalworking; it excels when drilling alloyed and unalloyed steels, cast irons and other hard materials where a short, rigid tool is required for precision holes.

Can the MetavCUT Twist Drill Type N be used on handheld drills?
The MetavCUT Twist Drill Type N is designed mainly for machine use; while it can be used in robust handheld drills for certain tasks, optimal accuracy and tool life are achieved on stationary or machine‑tool setups with proper clamping and cooling.

For what is a Twist Drill used?
A Twist Drill is mainly applied in the machining of high‑strength materials and for larger drill diameters; its geometry is relatively easy to resharpen and withstands higher loads.

Which three drill types exist?
There are three main drill types: Metal drills, Wood drills, and Stone/Concrete drills.

Why are Twist Drills sharpened (pointed)?
Point sharpening reduces the cross‑cut at the tip of the Twist Drill, lowering friction and required feed force while improving centring of the tip in the workpiece.

Can you drill wood with a Twist Drill?
A Metal drill such as the Twist Drill can be used in wood, but it offers less guidance and a lower finish quality; however, it is easier to resharpen and exhibits less self‑feeding compared with wood‑specific bits.

For which drilling depths is the Twist Drill most used?
A solid through‑hole is typically created with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool.

What is better, HSS or HSSE?
The common belief that HSSE steels are universally superior to HSS is incorrect; the choice should be based on working conditions and whether the additional cost of HSSE is justified.