Precision recycling knives for efficient material size reduction
Precision recycling knives and complementary cutting systems are engineered to deliver consistent particle size control and extended uptime in shredders and granulators, providing reliable throughput for processing plastics and other recyclables. These knives serve as wear-resistant replacements that reduce maintenance intervals and preserve cutting geometry for cleaner cuts, improving downstream separation and granulation; suitable for use in shredders, granulators and cutting mills. MetavCUT's own-brand spare and wear parts are tailored to specific machine applications to ensure fit and performance, offering a cost-effective alternative to OEM components.
26 x 10 x 2 Grinder/Granulator Knife ECON22/VE16 M2 1.3343 DMo5 - MetavCUT
Take advantage of the combination of precise fit, durable M2 1.3343 DMo5 tool steel and consistent pellet quality for uninterrupted production. Order the ECON22/VE16 replacement directly via Metav Werkzeuge or consult the team for compatibility advice. Recycling knife ECON22/VE16 – Granulator knife, 26 x 10 x 2 mm (M2 1.3343 DMo5) by MetavCUT The ECON22/VE16 is a wear part for recycling and granulation equipment, engineered to reduce plastics to processable sizes in shredder and pelletising systems. Precision-ground M2 tool steel Exact 26 x 10 x 2 mm profile Compatible with ECON shredders and granulators Low dust, consistent pellet quality Consistent cutting performance for stable throughput A precision-ground granulator knife in M2 1.3343 DMo5 steel delivers predictable performance in continuous recycling processes. The ground cutting edge and exact 26 x 10 x 2 mm profile produce uniform shearing action, which reduces fines and prevents frequent downstream blockages. For production planners this means fewer process interruptions and a steadier material flow into extrusion and pelletising stages, supporting overall line efficiency without compromise. Material selection that balances edge retention and toughness The choice of M2 1.3343 DMo5 high-speed tool steel provides a combination of hardness and toughness suited to abrasive feedstocks. This material sustains a sharp edge over longer cycles, reducing the frequency of blade changes and tool turnover. The result is a lower total cost of operation through extended service intervals, while maintaining cutting quality required for consistent regranulate properties. Exact fit with ECON systems for predictable output Designed for use in ECON shredders and granulation units, the blade’s precise dimensions and mounting profile ensure a secure fit and repeatable blade geometry after each service intervention. A correct fit reduces vibration and irregular wear, which in turn minimises dust generation and supports more uniform pellet size distribution. Stable pellet geometry improves downstream handling and reprocessing quality. Robust wear part engineered for production environments As a dedicated wear component, this granulation blade is optimised for productive use: it is produced to tight tolerances for interchangeability and reliable operation within industrial recycling lines. The combination of a sharp cutting edge and robust base material supports productive uptime and contributes to predictable maintenance scheduling. We offer an economical alternative under the MetavCUT brand that is process‑optimised, durable and built specifically for continuous industrial use. We offer a cost-effective alternative with the MetavCUT brand to original manufacturer parts: our process‑optimised wear parts are precisely fitting, long‑lasting and specially developed for productive operation. Contact Metav Werkzeuge for tailored MetavCUT replacements and fast delivery from Emmerich; technical advisors are available to confirm fitment for ECON systems. Technical Data Article number: ECON-ECON22/VE16-26x10x2-M2-13343-DMo5 Item name: Recycling knife / Granulator knife ECON22/VE16 Material: M2 1.3343 DMo5 Facts Dimensions: 26 x 10 x 2 mm Special features Compatible with ECON recycling and granulation systems Application: shredders, cutting mills and granulators Benefit: precision fit, reduced dust, consistent pellet quality FAQ Is this blade compatible with ECON machines? Yes. The ECON22/VE16 recycling knife (SKU ECON-ECON22/VE16-26x10x2-M2-13343-DMo5) is designed for use in ECON shredders and granulators and matches the specified mounting profile. What material is used and why does it matter? The blade is manufactured from M2 1.3343 DMo5 high‑speed steel, which combines edge retention and toughness to maintain cutting quality over extended production cycles. Which types of plastic can be processed with this knife? Typical feedstocks include films, pipes, plates, sprues and similar thermoplastics commonly encountered in recycling lines and granulation processes. How does knife quality affect pellet output? Sharp, precisely profiled knives reduce fines and dust, producing more uniform pellets; this improves downstream handling and final regranulate consistency. Are MetavCUT replacement knives available as spares? Yes. MetavCUT supplies matching wear parts; please reference SKU ECON-ECON22/VE16-26x10x2-M2-13343-DMo5 when enquiring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
26 x 10 x 2 Shredder/Granulator Knife ECON22/VE16, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of precise dimensions, wear-resistant 1.3207 EW9Co10 steel and a shape proven for granulation and shredding to maintain steady plant output; order the blade directly via Metav Werkzeuge or consult our advisors for fitment details. ECON22/VE16 granulator and shredder knife — 26 x 10 x 2 mm, 1.3207 EW9Co10 The ECON22/VE16 granulator and shredding knife for ECON recycling machines, engineered to deliver consistent pellet quality and reliable feeding in industrial recycling and pelletising lines. High-cobalt steel 1.3207 EW9Co10 Precision ground cutting edge for uniform pellets Compatible with ECON22/VE16 machine series Dimensions 26 x 10 x 2 mm Durable blades that keep production flowing The blade is manufactured from 1.3207 EW9Co10, a tool-grade material selected for its wear resistance and dimensional stability under repetitive cutting loads. That material choice translates into fewer changeovers and a longer service interval for the cutting system, which supports continuous throughput in recycling and granulation plants. Where consistent output counts, this design helps reduce rejects and prevents unexpected slowdowns by maintaining a steady cutting geometry over time. Precision dimensions for drop-in compatibility and clean cuts With exact 26 x 10 x 2 mm dimensions and a precision-ground edge, the knife is designed for direct installation into compatible ECON shredders and granulators. The accurate profile promotes uniform pellet size, lowers fine dust generation and reduces melt variation in downstream processing. For operators, that means improved processing efficiency and a better final product appearance; for the plant, it reduces cleaning cycles and secondary finishing work. Practical performance in industrial recycling applications Intended for use in shredders, cutting mills and granulation systems, this blade performs well on a range of thermoplastic streams—film, pipe, plate, sprues and regrind. Its geometry is optimised for reliable feeding and even cutting, which supports consistent bulk density and ease of handling in the material flow. Supplied under the MetavCUT label, the component benefits from quality control focused on productive, repeatable performance in demanding recycling environments. For robust, process-ready knives from MetavCUT, contact Metav Werkzeuge in Emmerich for availability and technical advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: ECON-ECON22/VE16-26x10x2-13207-EW9Co10 Product name: Zerkleinerungsmesser / Granuliermesser 26 x 10 x 2 ECON22/VE16 Brand: MetavCUT Facts Dimensions: 26 x 10 x 2 mm Material: 1.3207 EW9Co10 Model: ECON22/VE16 Special features For use in ECON recycling and granulation systems Suitable for shredders, granulators and pelletising lines Application: plastics, sprues, films, pipes, plates Process-optimised wear component designed for productive use FAQ How does this knife differ from standard granulator blades? The MetavCUT ECON22/VE16 knife uses 1.3207 EW9Co10 and a precision-ground edge to provide improved wear resistance and more consistent pellet geometry compared with generic blades. Which machines are compatible with this blade? Compatibility is aimed at ECON recycling and granulation equipment, specifically models accepting the ECON22/VE16 knife size and form factor. What materials can be processed with this knife? The blade is suited to a wide range of thermoplastic materials including films, pipes, plates and sprues, supporting both shredding and granulation tasks. Does the knife help to reduce dust and fines? The precision edge and consistent cutting geometry contribute to lower dust generation and more uniform particle size in the processed output. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com With MetavCUT, a cost-effective alternative to original manufacturer parts is provided: the process-optimised wear parts are made to fit precisely, built for long life and specifically developed for productive industrial use.
32 x 12 x 4 Granulator/Shredder Knife, M35 HSS-Co, Precision Ground - MetavCUT
Take advantage of M35 HSS‑Co hardness and the precise 32 x 12 x 4 mm profile to increase uptime and achieve consistent pellet quality in recycling lines; order the knives via Metav Werkzeuge or consult our team for fitment advice. Granulator Knife 5526 — Shredder / Granulator Blade, 32 x 12 x 4 mm, M35 HSS‑Co (MetavCUT) Granulator Knife 5526 is a specialised cutting blade for shredders and granulators, designed to deliver consistent cutting performance in industrial recycling and pelletising applications M35 HSS‑Co alloy for extended tool life Precise 32 x 12 x 4 mm ground profile Compatible with BKG shredders and granulators Optimised for consistent pellet quality Engineered for continuous recycling throughput The blade is manufactured from M35 HSS‑Co, a high-speed steel with cobalt alloying that improves heat tolerance and wear resistance under demanding cutting speeds. The specified 32 x 12 x 4 mm dimensions are ground to tolerances that support repeatable cutting geometry, which in turn stabilises material flow through the machine. For operators concerned with process reliability, the combination of robust alloy and accurate geometry reduces unplanned stops and supports steady production output. Better granulate quality with less dust and fines A precisely formed cutting edge promotes uniform strand and pellet size, contributing directly to consistent pellet quality and lower proportions of fines and dust. In granulating and shredding processes this means fewer downstream screening interventions and cleaner regrind. The improved cut quality also helps maintain melt and extrusion parameters when the reprocessed material is returned to production, aiding both product quality and process efficiency. Designed to reduce maintenance frequency and downtime Using a cobalt-alloyed high-speed steel enhances edge retention during continuous operation, which extends service intervals and lowers the frequency of part changes. Predictable wear characteristics allow maintenance planning rather than reactive replacement, supporting higher overall equipment effectiveness. The robust material choice is a rational investment for workshops and recyclers seeking long-term operational stability and reduced total cost of ownership. Versatile application across recycling processes These knives are intended for installation in shredders, cutting mills and granulating systems where plastics, films, pipes and plates are processed. The geometry and material are optimised for cutting polymeric wastes into manageable sizes and for slicing melt-strands into pellets after extrusion. The blade performs well across typical recycling feedstocks, supporting both size reduction and pelletising stages of material recovery. Fitment and practical considerations for integration Compatibility with BKG machines is specified to simplify procurement and replacement; the blade’s dimensions and mounting geometry match common holder designs used in industrial granulators. The precise manufacturing reduces the need for adjustment at installation and helps re-establish nominal cutting clearances quickly. For integration planning, the technical data below provides the key values required for checking fit and replacement intervals. Contact Metav Werkzeuge for precise fitment advice or to order MetavCUT granulator knives tailored to recycling operations — our specialists in Emmerich can confirm compatibility and delivery options Technical Data Article number: BKG-5526-32x12x4-M35-HSS-Co Type / designation: 5526 Brand: MetavCUT Material: M35 - HSS‑Co Dimensions: 32 x 12 x 4 mm Facts Cutting edge material: M35 (high-speed steel with cobalt) Length x width x thickness: 32 x 12 x 4 mm SKU: BKG-5526-32x12x4-M35-HSS-Co Special features Suitability: shredders, granulators, cutting mills Application: size reduction and pelletising of plastic waste Benefit: designed for reduced dust generation and uniform pellets Compatibility: for use with BKG machines FAQ What material is the blade made from? The blade is manufactured from M35 HSS‑Co, giving the Granulator Knife 5526 improved heat resistance and wear performance for continuous operation. Is this knife compatible with BKG equipment? Yes — the 5526 blade is specified for installation in BKG shredders and granulators and matches common mounting geometries used by those machines. Which materials can be processed with this knife? The knife is suitable for plastics, films, pipes and plates in recycling lines, supporting both coarse size reduction and strand pelletising stages. How does the knife influence dust and fines? The precise ground profile and sharp cutting geometry reduce material fragmentation, resulting in fewer fines and a cleaner granulate fraction. What are the exact dimensions for ordering and fit checks? Dimensions are 32 x 12 x 4 mm as listed for the 5526 blade; these values are used to verify fitment in the tool holder. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
32 x 12 x 4 Shredder/Granulator Knife 5526, 1.3207 EW9Co10 - MetavCUT
Benefit from dependable cutting performance and uniform pellet quality through the combination of 1.3207 EW9Co10 high-alloy steel and precise 32 x 12 x 4 mm dimensions; the robust geometry ensures reduced dust generation and consistent throughput in BKG shredding and granulating lines. Order the granulator blade directly via Metav Werkzeuge or ask our consultants if needed. Granulator blade 5526 — 32 x 12 x 4 mm, 1.3207 EW9Co10 (MetavCUT) The Granulator blade 5526 is a precision wear part for BKG recycling, shredding and pelletising systems, engineered to provide clean cutting of plastics, films, pipes and plates within industrial recycling workflows. High-alloy 1.3207 EW9Co10 steel Precision 32 x 12 x 4 mm grind For BKG shredders and granulators Reliable throughput for continuous recycling lines The blade is designed to maintain a consistent cut profile under prolonged operation, which translates into stable throughput and fewer production interruptions. When fitted into a shredding or granulating station the hardened edge and defined geometry help to produce uniform particle sizes, improving downstream processing such as washing, drying or re-extrusion. Reduced fines and dust lead to cleaner handling and lower separation losses, while the blade’s geometry supports predictable wear behaviour that simplifies maintenance planning and spare-part logistics. Material choice and edge integrity explained Constructed from 1.3207 EW9Co10, the steel grade offers a balance of toughness and wear resistance suitable for abrasive and heterogeneous plastics streams. The alloying and heat treatment provide a cutting edge that resists chipping while retaining hardness where most needed; this means a longer interval between regrinds compared with softer steels. For technicians less familiar with metallurgical grades: the designation indicates a high-speed steel variant optimised for cutting tools, where coarse inclusions are minimised and edge stability is prioritised to deliver consistent performance in demanding recycling environments. Practical fitment and operational benefits in BKG systems Intended specifically for BKG machinery, the blade’s 32 x 12 x 4 mm specification matches common holder interfaces and mounting grooves used in industrial granulators and shredders. Correctly matched blades reduce vibration and promote even wear across the cutting set, which supports quieter running and more reliable motor load profiles. The component is suitable for processing a broad range of plastics — from thin films and sprues to thicker piping and plate remnants — enabling plant operators to standardise on a single blade type for mixed-waste streams and reduce inventory complexity. Process-optimised wear parts from MetavCUT MetavCUT supplies process-optimised cutting edges that replicate original fit while being tailored for productive use: the knives are dimensionally accurate, ground to maintain concentricity in rotating systems and delivered ready for installation. Using such replacement blades supports a predictable maintenance cycle and contributes directly to equipment availability, which is critical where uptime and material yield define operational margins. Documentation and traceability accompany deliveries to facilitate quality control and spare-part record keeping. We offer a cost-efficient alternative to original manufacturer parts that does not compromise on fit or function. Our MetavCUT range is developed for heavy-duty, production-oriented use and is subjected to quality checks at our Emmerich facility to ensure a consistent standard across batches. Contact Metav Werkzeuge to confirm compatibility for MetavCUT 5526 in BKG systems and arrange supply directly from our Emmerich warehouse Technical Data Article number: BKG-5526-32x12x4-13207-EW9Co10 Label: Zerkleinerungsmesser / Granuliermesser 32 x 12 x 4 5526 für BKG Maschinen aus 1,3207 EW9Co10 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 32 x 12 x 4 Part ID: 5526 UID: BKG-5526-32x12x4-13207-EW9Co10 Core specifications Dimension: 32 x 12 x 4 mm Material grade: 1.3207 EW9Co10 Part number: 5526 Applications & features Suitable for BKG recycling, shredding and pelletising systems For use in shredders, cutting mills and granulators to reduce plastics to processable size Designed to produce uniform pellets and reduce dust and fines Process-optimised wear part, precision ground for reliable fit FAQ What materials can this blade process? The granulator blade 5526 is intended for plastics including films, sprues, pipes and plates; the 1.3207 EW9Co10 steel provides toughness and wear resistance for mixed plastic waste streams. Is the geometry compatible with standard BKG holders? The 32 x 12 x 4 mm dimensions match common BKG blade seats; refer to the part number BKG-5526-32x12x4-13207-EW9Co10 when confirming fitment. How does the MetavCUT variant compare to original blades? MetavCUT blades are produced as process-optimised wear parts that replicate original fit while prioritising industrial durability and consistent edge quality for continuous production use. What signs indicate the blade needs regrinding or replacement? Increased motor load, uneven pellet size or higher dust levels typically indicate wear; the MetavCUT 5526 blade is designed to show gradual, predictable wear for easier maintenance planning. Are installation instructions or balancing data provided? The blade is delivered dimensionally accurate and ground; balancing and mounting follow manufacturer procedures for the host BKG machine and should use the part number BKG-5526-32x12x4-13207-EW9Co10 for reference. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 x 17 x 4 Granulator/Crusher Knife, EW9Co10 High-Speed Steel 1.3207, For BKG Machines - MetavCUT
Combining durable 1.3207 EW9Co10 steel with a precise 32 x 17 x 4 mm profile yields consistent pellet quality, reduced dust and longer service intervals — ideal for continuous recycling operations. Order the granulator knife directly via Metav Werkzeuge or request advice from our consultants to confirm machine compatibility. Granulator Knife 3554 for BKG – 32 x 17 x 4 mm, 1.3207 EW9Co10 (MetavCUT) The Granulator Knife 3554 is a precision wear part for BKG recycling and granulation systems, engineered to deliver uniform pellet size and dependable cutting performance in industrial reprocessing lines. Hard-wearing 1.3207 EW9Co10 steel Precise 32 x 17 x 4 mm profile Direct fit for BKG recycling machines Reliable cutting performance for continuous operation The combination of cobalt-alloyed tool steel and a controlled geometry ensures stable cutting behaviour under high load. Manufactured from 1.3207 EW9Co10, this blade offers elevated wear resistance and retains edge stability across long production runs. For plants processing film, pipe offcuts or sprues, the consistent edge life translates into fewer blade changes and lower unplanned stoppages. The result is improved throughput and a more predictable maintenance rhythm, which supports tighter production planning and cost control. Exact fit and repeatable pellet quality A precisely manufactured profile of 32 x 17 x 4 mm delivers a secure mounting and uniform cutting clearance in BKG granulators and shredders. This dimensional accuracy contributes directly to consistent pellet size and reduced fines generation, easing downstream separation and drying. The close tolerances reduce vibration and uneven loading on the rotor, which helps to protect bearings and extend overall machine life. Compatibility with BKG systems is ensured by the knife’s specific form factor and bore layout, making installation straightforward for trained technicians. Process benefits and handling advantages Sharp, well-matched knives lower the energy required per tonne of material and decrease dust and heat build-up during size reduction. This blade is designed for applications in recycling and pelletisation where low dust, uniform feedstock and stable regranulate quality are priorities. Maintenance is simplified through predictable wear patterns, enabling condition-based replacement rather than constant inspection cycles. For processors aiming to improve regrind quality or to reduce secondary sorting, a precise cutting edge is a direct contributor to product quality and downstream efficiency. Contact Metav Werkzeuge today for supply of MetavCUT granulator knives and expert guidance on selection and fitment Mit der Marke MetavCUT bieten wir eine kostengünstige Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Technical Data Article number: BKG-3554-32x17x4-13207-EW9Co10 Name: Granulator knife 3554 Brand: MetavCUT Facts Dimension: 32 x 17 x 4 mm Material code: 1.3207 EW9Co10 Special features Material: 1.3207 EW9Co10 Suitable for: BKG recycling and granulator systems Application: shredding, granulation, pelletisation of plastics FAQ What materials can this knife process effectively? The MetavCUT Granulator Knife 3554 is specified for use in plastics recycling and is suitable for common polymer streams processed in BKG systems, delivering uniform granulate quality. Is the knife a direct replacement for BKG originals? The blade is produced to the dimensions and mounting form of the BKG 3554 variant and is intended as a direct-fit wear part for BKG recycling machines. How does the material 1.3207 EW9Co10 affect service life? Using 1.3207 EW9Co10 provides elevated wear resistance and edge retention, which supports longer intervals between replacements and more stable cutting performance. Can the blade reduce dust and fines compared with worn knives? Yes — a sharp, correctly dimensioned knife reduces fracturing and abrasion during cutting, which lowers dust generation and improves pellet uniformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 x 22 x 4 Granulator Cutter Knife For Recycling Shredders, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of durable EW9Co10 steel, a precision 32 x 22 x 4 profile and direct compatibility with BKG systems to maintain steady production and reduce unplanned stoppages. Order the blade via Metav Werkzeuge or request specialist advice for integration into existing granulation lines. MetavCUT Granulator Knife 5534 — 32 x 22 x 4, 1.3207 EW9Co10 for BKG machines The MetavCUT Granulator Knife 5534 is a precision wear part for BKG recycling and granulation equipment, engineered to deliver consistent pellet quality and long service intervals. Solid EW9Co10 high-wear steel Precision ground 32 x 22 x 4 profile Direct fit for BKG recycling machines Optimised for clean, uniform granulate Greater throughput through tougher cutting edges Manufactured from 1.3207 EW9Co10, this granulator blade provides a balance of toughness and wear resistance that supports continuous processing in heavy-duty recycling routines. The alloy composition contributes to sustained edge life, reducing the frequency of blade changes and interventions. Fewer machine stops translate directly into higher overall equipment effectiveness and lower production overheads, which is particularly relevant for high-volume plastic reprocessing operations. Uniform pellet size and reduced particulate generation A sharp, accurately profiled cutting edge produces consistent pellet size and smoother material flow through downstream sieves and conveyors. That uniformity lowers the need for secondary screening and helps maintain product quality specifications for reprocessing. At the same time, precise cutting minimises fines and dust release during operation, contributing to a tidier process environment and less wear on ancillary filtration systems. Exact fit for BKG installations to save maintenance time With a precision ground geometry of 32 x 22 x 4, the blade is produced to match the mounting and clearance requirements typical of BKG shredders and granulators. Straightforward replacement with correctly toleranced parts reduces set-up time and the risk of misalignment. Reliable fitment supports stable rotor dynamics and helps avoid vibration-related damage, thereby protecting both machine and end product quality. Engineered for diverse recycling tasks and reliable performance Designed for use in shredders, cutting mills and pelletising systems, this knife handles a broad range of polymer waste streams, including film, pipes and runner scrap. The robust material choice and finished cutting edge support repetitive load cycles found in demanding recycling environments. When combined with scheduled inspection and proper rotor maintenance, the wear part contributes to predictable service intervals and a dependable production rhythm. Choose MetavCUT blades in EW9Co10 for durable, process-ready performance — contact Metav Werkzeuge for tailored supply and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BKG-5534-32x22x4-13207-EW9Co10 Label: Zerkleinerungsmesser / Granuliermesser 32 x 22 x 4 5534 für BKG Maschinen aus 1,3207 EW9Co10 Manufacturer: MetavCUT Facts Dimensions: 32 x 22 x 4 mm SKU: BKG-5534-32x22x4-13207-EW9Co10 Special features Material: 1.3207 EW9Co10 Application: shredders, granulators, pelletising systems (plastic recycling) Compatible with: BKG recycling and granulation machines Designation: 5534 FAQ Is this blade compatible with existing BKG granulators? The MetavCUT granulator knife 5534 is specified for use in BKG recycling and granulation equipment and is manufactured to fit the described mounting profile. Which materials can be processed with this blade? The blade made from 1.3207 EW9Co10 is intended for typical plastic waste streams such as film, runners, pipes and plate-like scrap within granulation and shredding operations. How does the material affect blade life? Using EW9Co10 offers enhanced wear resistance and toughness, which helps the MetavCUT blade sustain cutting performance under repetitive load and extend intervals between replacements. Can this wear part improve pellet quality? A correctly profiled and sharp granulator knife promotes consistent pellet size and reduces fines, supporting higher-quality regranulate for downstream processing. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com With the MetavCUT brand, an economical alternative to manufacturer-original parts is offered: process-optimised wear components that are precisely matched, long-lasting and developed specifically for productive industrial use.
37 x 24.6 x 4 Granulator / Shredder Knife, M2 (1.3343 DMo5) - MetavCUT
Take advantage of a durable, precision-ground cutting edge and high-grade M2 (1.3343 DMo5) steel for consistent pellet quality and reduced dust. The 37 x 24.6 x 4 mm geometry ensures a direct fit for MAAG granulators and shredders, improving uptime and cutting performance. Order replacement blades through Metav Werkzeuge or consult our specialists for seamless integration. Granulator knife / Shredder blade – MetavCUT 13490 — M2 (1.3343 DMo5), 37 x 24.6 x 4 mm A MetavCUT granulator knife designed for shredders and pelletisers, suited to MAAG recycling systems for precise reduction and pellet cutting. M2 (1.3343 DMo5) high-speed steel Precision ground cutting edge Direct fit for MAAG granulators Consistent pellets with low dust Consistent pellet quality through precise cutting The precision-ground cutting geometry of this blade delivers a uniform cut, which directly improves pellet consistency and reduces fines and dust during processing. Manufactured from M2 1.3343 DMo5, the blade maintains sharpness under continuous operation and contributes to a steady product size distribution. This stability reduces rework and downstream separation, supporting production efficiency in recycling and compounding lines. Robust material for extended service life Constructed from M2 (1.3343 DMo5) tool steel, the knife resists wear while retaining edge integrity under demanding conditions. The material choice and heat treatment combination offer a favourable balance between hardness and toughness, meaning fewer interruptions for blade changes and lower overall tooling costs. The durable construction is especially beneficial for processing mixed plastics, films and sprues where variable contamination can otherwise accelerate wear. Seamless retrofit and reliable performance in MAAG systems With its 37 x 24.6 x 4 mm specification and part reference 13490, this blade is engineered for compatibility with MAAG shredders and granulators, allowing straightforward replacement without machine modification. The design focus on dimensional accuracy and fit reduces installation time and alignment effort, enabling quicker returns to full production and predictable cutting behaviour in continuous pelletising processes. Clear advantages for recycling operations Optimised for shredding, granulating and pelletising tasks, the blade supports lower dust generation and improved melt homogeneity downstream. Reduced dust not only enhances workplace cleanliness but also diminishes material loss, contributing to a better yield from reclaimed feedstock. The wear-part concept—precision manufactured to match the original equipment geometry—helps maintain throughput and part quality over repeated cycles. For tailored replacement blades from MetavCUT, contact Metav Werkzeuge GmbH in Emmerich for technical advice and ordering by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MAAG-13490-37x24.6x4-M2-13343-DMo5 Part number: 13490 Brand: MetavCUT Facts Material: M2 1.3343 DMo5 Dimensions: 37 x 24.6 x 4 mm Compatibility: MAAG recycling and granulation systems Special features Application: Shredders, granulators, pelletisers for recycling Benefit: Precise cut for consistent pellets and reduced dust Design: Precision ground cutting edge, replacement wear part FAQ What machines is this blade compatible with? This granulator knife is compatible with MAAG recycling systems and is suitable as a replacement blade for MAAG shredders and granulators (SKU MAAG-13490-37x24.6x4-M2-13343-DMo5). What material is the knife made from? The blade is manufactured from M2 (1.3343 DMo5) high-speed tool steel to provide wear resistance and edge retention in continuous recycling applications. How does this blade affect pellet quality? A precision-ground edge on the MetavCUT granulator knife improves the uniformity of cut pieces and reduces fines, resulting in more consistent pellets and less dust during pelletising. Is installation straightforward or are adjustments required? Designed for direct fitment to MAAG systems, the blade’s 37 x 24.6 x 4 mm geometry enables straightforward replacement and minimal adjustment during installation. What types of plastics can be processed with this knife? The blade is suitable for a wide range of plastics typically processed in recycling and granulation, including films, pipes and sprues, as described in the product application details. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com With our MetavCUT brand, we offer a cost-effective alternative to original manufacturer parts: our process-optimised wear parts are precision-matched, durable and engineered specifically for productive use.
37 x 24.6 x 4 Grinding Knife Granulator Blade For MAAG Recycling Machines, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of durable tool steel, precise sizing and MAAG compatibility to maintain uninterrupted recycling production. Order directly via Metav Werkzeuge or consult our specialists for system matching and supply. Granulator knife / Shredding blade 13490 – 37 x 24.6 x 4, 1.3207 EW9Co10 (MetavCUT) The Granulator knife 13490 is a precision replacement blade designed to cut and granulate plastic feedstock in MAAG recycling and pelletising systems, providing consistent pellet quality and reduced dust during continuous operation. Hard-wearing 1.3207 EW9Co10 tool steel Precision ground to 37 x 24.6 x 4 mm Compatible with MAAG recycling and granulation machines Ensures consistent pellet size and low dust Reliable cutting performance for continuous recycling The Granulator knife 13490 delivers reproducible cutting geometry that supports steady plant throughput and predictable regranulate. Manufactured to exact 37 x 24.6 x 4 mm dimensions, the blade’s tight tolerances reduce runout and vibration in shredders and granulators, which in turn limits fines and improves consistent pellet quality. This technical reliability converts directly into fewer stoppages and more efficient downstream processing, a tangible gain for production schedules and material yield. Designed for MAAG systems to keep lines running Compatibility with MAAG machines is assured by the blade’s form and fixing dimensions, making it suitable for use in shredders, cutting mills and pelletising systems where precise shearing is required. The accurately matched geometry supports even cutting forces across the rotor, helping to reduce dust generation and blade chatter; the result is a cleaner process and improved handling of films, pipes, sprues and plate material. In practice, this means more stable output and simplified quality control for recycling operators. Material choice and practical application explained Made from 1.3207 EW9Co10, the blade is specified for wear resistance and dimensional stability under repetitive shear loads. This material selection is oriented toward tools subjected to abrasive and intermittent cutting tasks common in recycling plants. Typical applications include size reduction of plastic waste and the cutting of extruded strands into uniform pellets. When fitted as a replacement part, the component supports consistent output and helps maintain the mechanical balance of the cutting assembly. Contact Metav Werkzeuge today to discuss MetavCUT replacement blades for MAAG systems and to confirm fitment: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: MAAG-13490-37x24.6x4-13207-EW9Co10 Internal ID: 13490 Brand: MetavCUT Facts Dimensions: 37 x 24.6 x 4 mm Material: 1.3207 EW9Co10 SKU: MAAG-13490-37x24.6x4-13207-EW9Co10 Special features Application: shredders, cutting mills, granulators Suitable for: MAAG recycling and pelletising machines Function: size reduction and pellet cutting Story trigger: recycling blade / wear part FAQ Is this blade compatible with MAAG machines? Yes. The granulator knife 13490 is produced to the dimensions and fixing form suitable for MAAG recycling and granulation equipment and is described as compatible with those systems. What materials can be processed with this blade? The blade is intended for plastic waste processing, including films, pipes, sprues and plates typically handled in shredding and granulating lines. What are the exact dimensions and material of the blade? Dimensions are 37 x 24.6 x 4 mm and the blade material is 1.3207 EW9Co10, specified for durability in cutting applications. How does this blade affect pellet quality and dust generation? The precision ground geometry promotes even cutting forces and clean shearing, supporting consistent pellet quality and lower dust levels during operation. Is this a direct replacement for MAAG part number 13490? The MetavCUT 13490 is supplied as a process-optimised replacement designed to match the original form and function of the MAAG part for straightforward installation. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com With the MetavCUT range, Metav provides an economical alternative to original manufacturer parts: these process-optimised wear components are precisely matched, durable and engineered specifically for continuous industrial use.
37 x 25 x 4 Granulator Knife For Recycling And Shredding, M2 1.3343 DMo5 - MetavCUT
Taking advantage of a precision-ground 37 x 25 x 4 mm profile and M2 (1.3343) high‑speed steel yields longer tool life and consistent pellet quality in continuous recycling processes; order directly via Metav Werkzeuge or consult the team for compatibility advice. Shredding and granulating knife 37 x 25 x 4 (10293882) – MetavCUT for MAAG machines, M2 (1.3343) high‑speed steel Shredding and granulating knife 37 x 25 x 4 (10293882) is a purpose-made wear part for MAAG recycling and pelletising machinery, optimised to reduce plastic waste to a uniform, processable size while maintaining cutting consistency and low dust generation. Precision-ground 37 x 25 x 4 mm blade Made from M2 (1.3343) high-speed steel Compatible with MAAG shredders and granulators Designed for consistent pellet quality Consistent cuts for reliable pellet output The blade is precision-ground to the specified 37 x 25 x 4 mm dimensions, delivering reproducible geometry across production runs. Consistent edge geometry directly reduces fines and variations in pellet size, which improves downstream processing stability. For operators in recycling plants and pelletising lines, this translates into fewer rejects, steadier throughput and more predictable material behaviour during extrusion and reprocessing. Material choice that balances wear resistance and toughness Manufactured from M2 (1.3343) high‑speed steel, the knife combines hardness and toughness suited to the mechanical stresses found in shredding and granulating applications. This material selection offers improved wear resistance compared with standard carbon steels, helping to maintain cutting performance under continuous load. The result is extended service intervals and lower frequency of part changeovers, supporting leaner maintenance cycles. Engineered for integration into MAAG systems Designed for direct use in MAAG shredders and granulators, the component matches the OEM fit and mounting geometry for straightforward replacement. Compatibility with MAAG equipment reduces modification time and potential alignment issues during refitting. With a clear part reference and stable dimensions, planning spare-part inventories and scheduling replacements becomes simpler and more reliable. Operational advantages: cleaner processing and predictable performance Sharp, well-fitting knives reduce dust generation and produce more uniform material, which benefits filtration, conveying and melting stages. Reduced dust and consistent pellet sizes lower the risk of process interruptions and help maintain product quality. As a wear part specified for recycling environments, the component supports continuous operation and contributes to a safer, cleaner production area. Contact Metav Werkzeuge for delivery options, lead times and technical matching of MetavCUT recycling knives supplied from the Emmerich warehouse Technical data Article number: 10293882 SKU: MAAG-10293882-37x25x4-M2-13343-DMo5 Brand: MetavCUT Facts Dimensions: 37 x 25 x 4 mm Material: M2 (1.3343) high‑speed steel (DMo5) Special features Compatible with MAAG shredders and granulators Intended use: recycling, shredding and pelletising applications Wear part optimised for consistent pellet quality FAQ Which machines is this knife compatible with? The knife is specified for MAAG shredders and granulators; the MetavCUT 10293882 part matches the common MAAG mounting profiles for straightforward replacement. Can this blade handle abrasive plastic residues and additives? Made from M2 (1.3343) high‑speed steel, the knife offers enhanced wear resistance suitable for typical abrasive contaminants found in plastic recycling streams, improving lifetime compared with standard tool steels. How often should the blade be replaced or reconditioned? Replacement intervals depend on feed material and operating conditions; the MetavCUT 10293882 blade is designed to extend service life and reduce changeover frequency under normal recycling operation. Is the knife supplied ready to install or does it require additional machining? The component is delivered to the specified dimensions and is intended for direct installation into compatible MAAG equipment without further machining. Does the knife influence dust generation and pellet consistency? A precision-ground edge helps to reduce fines and achieve uniform pellet size, which lowers dust formation and improves downstream processing consistency. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to manufacturer original parts with our MetavCUT brand: our process‑optimised wear parts are precisely matched, durable and developed specifically for productive, industrial use.
37 x 25 x 4 Granulator Knife For Recycling Shredders, M2 1.3343 DMo5 - MetavCUT
Take advantage of a robust combination of durable M2 (1.3343 DMo5) high‑speed steel, precise 37 x 25 x 4 mm dimensions and compatibility with MAAG recycling systems to ensure steady production and consistent pellet quality. Order replacements or consult Metav Werkzeuge for compatibility and supply. Granulator / Shredder Knife 10613960 – M2 (1.3343 DMo5), 37 x 25 x 4 by MetavCUT The Granulator / Shredder Knife 10613960 is a wear part for MAAG recycling and granulating systems, designed to reduce plastic waste and produce uniform pellets through precise cutting. M2 high-speed steel (1.3343 DMo5) for long life Precision 37 x 25 x 4 dimensions for exact fit Designed for MAAG recycling and granulating systems Sharp edge for consistent pellets and low dust Uniform pellets through precise cutting A precisely ground cutting edge translates directly into consistent pellet size and reduced fines during granulation. The blade’s exact 37 x 25 x 4 mm geometry guarantees an accurate seating in MAAG housings, which stabilises the shear zone and reduces vibration. For operations converting film, pipes, sprues or production offcuts, a uniform cut reduces downstream sorting effort and improves melt homogeneity. In practical terms, this means fewer rejects and a smoother extrusion or reprocessing step because material feed is more consistent. Engineered material for sustained performance Made from M2 (1.3343 DMo5), the knife benefits from the wear resistance and hot‑hardness typical of high‑speed steel, maintaining edge stability under continuous operation. High‑speed steel properties allow the blade to retain sharpness at elevated temperatures seen in heavy recycling cycles, which supports longer intervals between maintenance interventions. For workshops and processors seeking reliable uptime, this material choice offers a balance between durability and predictable resharpening behaviour, helping to control total operating costs over the part’s life. Exact fit to reduce downtime and adjustment The compact dimensional specification ensures straightforward replacement in MAAG granulators and shredders, making blade swaps faster and more repeatable. Correct fit reduces the need for re‑alignment and minimises machine idle time during maintenance. Because the component is manufactured to a shop‑floor standard tolerance, it helps sustain consistent cutting gaps, which directly affects particle distribution and dust generation. For production environments where throughput and repeatability matter, precise spare parts support smoother shifts and less process variation. Operational benefits and suitability Designed for use in shredders, cutting mills and pelletising lines, the knife supports processing of a wide range of plastic waste streams. Sharpness and correct geometry contribute to lower dust production and improved bulk material handling once material is cut to size. This wear part is particularly suitable where a balance of cutting performance and material longevity is required, and where compatibility with MAAG machine frames is a procurement priority. MetavCUT provides a cost‑efficient alternative to original manufacturer parts; our process‑optimised wear components are precisely matched, durable and developed specifically for productive, heavy‑duty use. For precision replacements from MetavCUT and advice on compatibility with MAAG systems, contact Metav Werkzeuge for fast supply and technical guidance via +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: MAAG-10613960-37x25x4-M2-13343-DMo5 Article number: 10613960 Brand: MetavCUT Material: M2 (1.3343 DMo5) Dimensions: 37 x 25 x 4 mm Intended for: MAAG recycling / granulating systems Core specifications Length: 37 mm Width: 25 mm Thickness: 4 mm Special features Wear‑resistant high‑speed steel Suitable for shredders, granulators, pelletisers Promotes uniform pellet size and reduced dust Process‑optimised geometry for MAAG machines FAQ How compatible is this knife with MAAG machines? The Granulator / Shredder Knife 10613960 is made specifically for MAAG recycling and granulating systems and is dimensioned for direct fit into the corresponding MAAG housings. What material is used for the blade and why does it matter? The blade is manufactured from M2 (1.3343 DMo5); this high‑speed steel provides elevated wear resistance and thermal stability, supporting sustained cutting performance in the Granulator / Shredder Knife 10613960. Can this knife handle different types of plastic waste? Yes, the blade is designed for use in shredders and granulators processing film, pipes, sprues and similar plastic offcuts, offering consistent cuts for a range of recyclable polymers. How does the blade geometry affect pellet quality? The precise 37 x 25 x 4 mm geometry maintains consistent cutting gaps and shear conditions, which improves pellet uniformity and reduces the generation of fines when using the Granulator / Shredder Knife 10613960. Is the blade suitable for continuous production environments? The combination of material and accurate manufacturing makes this blade suitable for continuous operation; its wear characteristics support predictable maintenance intervals for the Granulator / Shredder Knife 10613960. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37 x 25 x 4 Granulator Knife, 1.3207 EW9Co10 High-Wear Steel - MetavCUT
Combining high-cobalt durability with a precise 37 x 25 x 4 mm geometry delivers reliable cutting performance and consistent pellet quality; order the MAAG-10609111 recycling knife directly via Metav Werkzeuge or ask our consultants if needed. MAAG-10609111 37 x 25 x 4 Recycling Knife — MetavCUT wear part in 1.3207 (EW9Co10) MAAG-10609111 is a shredding and granulator knife engineered for cutting and pelletising applications in MAAG recycling systems, optimised for robust industrial use High-cobalt tool steel 1.3207 (EW9Co10) Precision 37 x 25 x 4 mm geometry Designed for MAAG recycling systems Reduced dust and consistent pellet quality Durable steel that keeps production running The use of material 1.3207 (EW9Co10) provides a balance of hardness and toughness that helps maintain a sharp cutting edge under continuous load. In practice, this means fewer unscheduled stops for blade changes and a steadier quality of output. The steel grade is chosen for wear resistance in abrasive polymer streams and for resistance to edge chipping when processing mixed waste. By retaining edge geometry longer, the blade contributes to predictable cycle times and reduced total cost of ownership. Accurate dimensions for consistent pellet size The 37 x 25 x 4 mm profile is manufactured to tight tolerances so that blade seating and clearance in MAAG assemblies remain constant. A precision-fit blade supports constant strand shearing in granulation and prevents irregular chip sizes that can increase rework or contaminate regrind. Clearances that remain stable under load reduce frictional heating and help maintain uniform melt and pellet characteristics, which is particularly important when reprocessed material must meet downstream extrusion specifications. Process benefits and operational efficiency Sharp, well-fitting knives translate into less dust and more uniform particle geometry, improving both housekeeping and product reusability. A process-optimised wear part such as this reduces fines formation and eases screening downstream. Maintenance cycles become more predictable because the blade’s wear behaviour is consistent, enabling planned replacements rather than reactive interventions. Fewer blade swaps support higher machine availability and lower labour expenditure per produced tonne. Application overview and compatibility The blade is intended for use in shredders, cutting mills and granulators where robust cutting edges are required to reduce films, pipes, sprues and other plastic waste to a manageable size. It is specifically suitable for MAAG recycling, shredding and pelletising equipment and has been designed to meet the mechanical requirements of those systems. The manufacturing quality focuses on repeatable geometry and surface finish to ensure safe assembly and reliable running. We offer with our MetavCUT brand a cost-effective alternative to original manufacturer parts: our process-optimised wear parts are precision-fit, long-lasting and specifically developed for productive use. Contact Metav Werkzeuge for tailored advice on MetavCUT replacement knives and ensure optimum uptime for MAAG recycling systems; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 10609111 SKU: MAAG-10609111-37x25x4-13207-EW9Co10 Product label: Zerkleinerungsmesser / Granuliermesser 37 x 25 x 4 for MAAG machines Brand: MetavCUT Dimensions & Measurements Dimensions: 37 x 25 x 4 mm Material: 1.3207 EW9Co10 Applications & Special features Suitable for MAAG recycling, shredding and pelletising systems For use in shredders, granulators and pelletisers to reduce plastic waste Process-optimised wear part for consistent pellet quality and low dust FAQ What machines is this blade compatible with? The MAAG-10609111 blade is compatible with MAAG recycling, shredding and pelletising systems and is designed to fit the corresponding knife housings in those machines. Which material is the knife made from and why is it used? This knife is manufactured from grade 1.3207 (EW9Co10); that high-cobalt tool steel offers improved wear resistance and edge stability for processing abrasive or mixed plastic waste. How does the blade influence pellet quality? A sharp, precision-made knife such as the MAAG-10609111 produces a uniform strand cut that reduces fines and contributes to consistent pellet size, improving downstream screening and re-extrusion quality. Is this a direct replacement for original MAAG parts? The MetavCUT MAAG-10609111 is a process-optimised wear part engineered to match MAAG geometries and function as an economical alternative to manufacturer-original blades while maintaining fit and performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37 x 25 x 4 Granulator Knife, 1.3207 EW9Co10 Steel - MetavCUT
Take advantage of a precision fit for MAAG systems, durable 1.3207 EW9Co10 tool steel and compact 37 x 25 x 4 mm dimensions to keep recycling lines productive and reduce downtime. Order the replacement knife directly via Metav Werkzeuge or consult our specialists for tailored advice and rapid supply. Recycling knife 10609460b – Granulator knife 37 x 25 x 4, MetavCUT The Recycling knife 10609460b is a precision granulator and shredding blade designed for MAAG recycling and pelletising machinery, engineered to produce uniform particles with minimal dust. Precision fit for MAAG machinery High-wear steel 1.3207 EW9Co10 Dimensions 37 x 25 x 4 mm Consistent pellet quality with low dust Consistent output and cleaner production runs A blade designed for uniform cutting directly improves process stability. The robust geometry of the knife delivers consistent pellet quality and reduces fines and dust during granulation or shredding, which in turn lowers downstream contamination and separation effort. By ensuring each cut is even, the component supports repeatable throughput rates and predictable material handling. For processors converting film, pipes, sprues or plates, this translates into fewer rejects and a steadier material stream for subsequent extrusion or reprocessing. Durable tool steel for longer production cycles Manufactured from 1.3207 EW9Co10, the blade offers high wear resistance suited to abrasive and continuous operation typical of recycling lines. This wear-resistant tool steel minimises frequency of replacements and keeps machine uptime high. Longer edge life reduces handling and inventory complexity, creating measurable efficiencies across maintenance cycles. When edge wear begins to affect cut quality, a timely exchange restores performance without complex reworking or on-site machining. Exact fit for MAAG systems and simplified logistics With precise 37 x 25 x 4 mm dimensions and matching tolerances, the knife integrates with MAAG shredders, granulators and pelletisers for straightforward replacement. The compact form factor supports rapid part swaps, reducing machine stoppage time. Supplied as a direct replacement part for MAAG equipment, the blade aligns with standard mounting points and cutting arrangements to simplify inventory management and spare-part planning. Reliable supply from Metav Werkzeuge in Emmerich ensures consistent availability for production-critical spares. Wir bieten mit MetavCUT eine wirtschaftliche Alternative zu Originalteilen: Unsere prozessoptimierten Verschleißteile sind maßgeschneidert, langlebig und für den anspruchsvollen Einsatz in Recyclinganlagen konzipiert. For tailored replacement blades, technical clarification or to request a quotation for SKU MAAG-10609460b-37x25x4-13207-EW9Co10, contact Metav Werkzeuge in Emmerich for reliable supply and expert advice. Technical data SKU: MAAG-10609460b-37x25x4-13207-EW9Co10 Article number: 10609460b Description: Recycling knife / granulator knife 37 x 25 x 4 for MAAG machines Dimensions / Core data Dimensions: 37 x 25 x 4 mm Special features Material: 1.3207 EW9Co10 Compatible with MAAG recycling, shredding and pelletising systems Suitable for shredders, granulators and pelletisers Brand: MetavCUT FAQ Which MAAG machines is this knife compatible with? The knife is suitable for MAAG recycling systems, shredding machines and pelletising equipment as listed in the product details; refer to SKU MAAG-10609460b-37x25x4-13207-EW9Co10 for exact matching. What materials can be processed with this blade? Designed for recycling applications, the knife efficiently cuts common plastics such as film, pipes, sprues and plates, supporting both shredding and granulation processes as described in the product information. How is blade life monitored and when should replacement occur? Blade life depends on feed material, contamination and operating parameters; replace the knife when cut quality declines or fines increase to restore consistent pellet quality. Is the knife supplied ready to install? The replacement knife is delivered as a finished cutting component compatible with MAAG mounting arrangements; check mounting screws and alignment during exchange. Will using this knife reduce dust and fines in the granulate? The knife’s geometry and precise manufacture are intended to promote even cutting and reduced dust generation, leading to cleaner output and less downstream separation. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37 x 25 x 4 Granulator Knife, 1.3207 EW9Co10 Steel, For MAAG Recycling Machines - MetavCUT
Take advantage of the blade's 1.3207 EW9Co10 composition and precision 37 x 25 x 4 mm dimensions to secure long service life and consistent pellet quality in MAAG granulators; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Granulator Knife 10613960 – 37 x 25 x 4 mm, 1.3207 EW9Co10 (MetavCUT) The Granulator Knife 10613960 is a wear part for MAAG recycling and granulating machines, engineered to deliver consistent cutting performance in industrial shredders and pelletisers. Precision-ground 37 x 25 x 4 mm blade High-wear cobalt steel 1.3207 EW9Co10 Fits MAAG shredders and granulators Ensures uniform pellet size and low dust Consistent pellet quality through durable cutting A granulator blade made from 1.3207 EW9Co10 combines high cobalt content with tool-steel toughness to deliver enhanced wear resistance and long edge life. In practical terms, this means fewer replacements and a steadier product stream: a sharp cutting edge produces uniform pellet size, reduces fines and minimises dust formation. For processes where particle consistency affects downstream extrusion or reprocessing, the material selection directly improves end-product quality and lowers overall production variability. Precision dimensions reduce downtime and vibration The exact 37 x 25 x 4 mm specification ensures a precise fit in MAAG assemblies, reducing play that can cause vibration, uneven wear or premature bearing loads. A blade that seats accurately in its holder maintains a stable cutting geometry, which supports continuous throughput and predictable maintenance intervals. The close tolerances and precision grinding of the cutting faces also simplify replacement routines: quicker swaps and less machine downtime translate into higher operational availability and lower unit processing cost. Engineered for industrial recycling and straightforward servicing Designed for use in shredders, granulators and pelletisers, this knife is suitable for processing films, pipes, sprues and mixed plastic waste where reliable sizing is required. The blade's profile and edge geometry are optimised for clean cutting rather than material smearing, which helps to reduce rework and wear on screens. For facilities seeking dependable spare parts from a stable supplier, MetavCUT offers process-optimised wear components tailored to industrial recycling demands; with our MetavCUT range, a cost-effective alternative to original manufacturer parts is provided—these wear parts are precisely matched, durable and engineered specifically for productive use. Contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss MetavCUT granulator knives and compatibility with MAAG systems Technical data Article number: 10613960 SKU: MAAG-10613960-37x25x4-13207-EW9Co10 Product name: Granulator knife 37 x 25 x 4 Brand: MetavCUT Facts Dimensions: 37 x 25 x 4 mm Material: 1.3207 EW9Co10 Special features Compatible with MAAG recycling and granulating machines Suitable for shredders, granulators and pelletisers Process-optimised wear part, precision-ground edge FAQ Is the blade compatible with MAAG granulators? The product is supplied as Granulator Knife 10613960 and is specified for use in MAAG recycling and granulating machines; compatibility depends on holder type and machine series. What does 1.3207 EW9Co10 mean for performance? The 1.3207 EW9Co10 designation indicates a high-cobalt tool steel that offers elevated wear resistance and good toughness, characteristics that support longer edge life and consistent cutting quality for the knife. Which types of plastic can this knife process? The blade is designed for common recycling tasks such as cutting films, sheets, pipes, sprues and a range of thermoplastics typically handled in granulators and shredders. How do the exact dimensions affect operation? The 37 x 25 x 4 mm dimensions ensure a precise fit that minimises vibration and uneven wear, promoting stable throughput and reducing the frequency of adjustments or premature replacements. What maintenance is recommended for these wear parts? Routine inspection of edge condition and holder fit is advised; when cutting quality declines or runout appears, replace the knife to restore pellet uniformity—MetavCUT spare parts are designed for straightforward swapping to keep production moving. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37 x 25 x 4 Granulator Knife, 1.3207 EW9Co10 Tool Steel - MetavCUT
High-wear recycling environments benefit from a blade that combines precise dimensions with a robust tool grade—1.3207 EW9Co10 and the exact 37 x 25 x 4 size deliver consistent cuts, low dust and reliable throughput for MAAG systems. Order these MetavCUT granulator knives via Metav Werkzeuge for assured fitment and spare-part supply. Granulator knife / Shredding knife 10293882 — 37 x 25 x 4, 1.3207 EW9Co10 (MetavCUT) A Granulator knife / Shredding knife 10293882 designed for MAAG recycling and pelletising systems to provide uniform cutting performance and dependable wear behaviour Durable EW9Co10 tool steel composition Precise 37 x 25 x 4 dimensional fit Compatible with MAAG recycling machines Low-dust cuts for consistent pellet quality Stable pellet quality through precise cutting geometry The knife’s role in pellet production is decisive: sharp, accurately made cutting edges produce homogenous regrind and reduce fines. Manufactured to the specified dimensions, the blade keeps the shear gap consistent inside granulators and shredders, which translates into more uniform pellets and fewer downstream sorting issues. Given the lifecycle of a production line, this stability supports continuous operation and reduces the frequency of quality-related stoppages. Reduced downtime thanks to exact fit and quick replacement An exact match to the stated dimensions minimises alignment work during maintenance and lowers machine reassembly time. The compact 37 x 25 x 4 format is engineered for straightforward installation in MAAG units, enabling faster blade exchanges and predictable maintenance intervals. In practice, this means shorter machine downtime and a steadier production rhythm for recycling and reprocessing plants. Grade and construction tailored for wear applications The blade is produced from the indicated material 1.3207 EW9Co10, a specification reflected in the product data. This material designation is applied consistently in manufacture to ensure reproducible cutting performance and dimensional stability over service life. For granulation and shredding tasks—processing films, pipes, sprues or regrind—such process-optimised wear parts contribute to lower dust output and more consistent material handling within the system. Supply security and specialist support from Metav Metav’s offer combines a broad stocking capability with technical insight for industrial users: the MetavCUT knives are positioned as economical, process-focused replacements for original parts while being manufactured to match fit and function. The sourcing and logistics framework from Emmerich ensures reliable delivery and traceability, supporting production schedules and spare-part planning. For facilities seeking to maintain throughput, the combination of consistent supply and engineered wear parts reduces operational risk. Wir bieten mit der Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz konzipiert. Contact Metav Werkzeuge for tailored delivery of MetavCUT granulator knives compatible with MAAG systems — expert advice and prompt spare-part supply are available from Emmerich by phone or email Technical Data Article number: 10293882 SKU: MAAG-10293882-37x25x4-13207-EW9Co10 Label: Zerkleinerungsmesser / Granuliermesser 37 x 25 x 4 10293882 für MAAG Maschinen aus 1,3207 EW9Co10 Manufacturer: MetavCUT Facts Dimensions: 37 x 25 x 4 Special features Material: 1.3207 EW9Co10 Suitable for MAAG recycling, shredding and pelletising systems Wear part for granulators and shredders FAQ What machines is this knife compatible with? This MetavCUT granulator knife (article number 10293882) is specified for MAAG recycling, shredding and pelletising equipment and fits the models indicated by MAAG How does the material designation affect performance? The designation 1.3207 EW9Co10 identifies the supplied blade material; the MetavCUT granulator knife is manufactured to that specification to ensure consistent production quality and repeatable wear behaviour Can the knife improve pellet consistency? Yes — the sharp, accurately produced cutting edges of this granulator/shredding knife reduce fines and contribute to uniform pellet size during extrusion and reprocessing Is this knife a direct replacement for original parts? The MetavCUT part 10293882 is offered as a process-optimised replacement to match the fit and function required in MAAG systems Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37 x 25 x 4 Granulator Knife, M2 (1.3343/DMo5) For MAAG Machines - MetavCUT
Order the (Granulator blade 10609460b) as a robust, wear‑resistant cutting solution that combines precise dimensions and high‑performance material for reliable recycling and granulating operations. Order the (Granulator blade 10609460b) directly via (Metav Werkzeuge) or ask our consultants if needed. Granulator blade 10609460b — granulating and shredding blade, M2 (1.3343) HSS, 37 x 25 x 4 mm Granulator blade 10609460b is a precision replacement blade designed for shredders and granulators in MAAG recycling and pelletising systems, manufactured from M2 (1.3343, DMo5) high‑speed steel for stable cutting performance. Precision fit for MAAG machines Made from M2 (1.3343) high‑speed steel Dimensions 37 x 25 x 4 mm Process‑optimised for low dust generation Consistent pellet quality through a durable cutting edge The M2 (1.3343) high‑speed steel composition provides a balance of toughness and hot‑hardness that preserves sharpness under continuous operation, resulting in consistent pellet quality and reduced rework. Built to perform in both shredders and granulators, the blade maintains a predictable cutting profile that supports steady throughput and uniform particle size, which is essential for downstream extrusion and reprocessing. This design reduces fines and dust, improving housekeeping and material yield. Precision fit that lowers vibration and maintenance intervals With exact 37 x 25 x 4 mm dimensions and process‑optimised tolerances, the blade offers a precision fit in MAAG machine holders, which cuts vibration and mechanical stress. Reduced micro‑movement in the tool seat translates to less premature wear on adjacent components and extended intervals between maintenance stops. The measured geometry helps preserve blade alignment, supporting continuous operation and predictable replacement cycles—two practical gains for production planning and uptime. Economic replacement parts engineered for production use As a MetavCUT wear component, this granulator blade is developed as an economical alternative to original manufacturer parts without compromising on long service life or cutting quality. The blade’s geometry and material selection are tailored to common recycling feedstocks—films, bottles, pipes and sprues—to ensure reliable performance across applications. Backed by Metav’s logistics and quality control, the part supports stable supply and consistent process results in industrial recycling environments. Contact Metav Werkzeuge for MetavCUT granulator blades to secure precision replacements for MAAG machines and ensure continuous production performance Technical data Article number: 10609460b SKU: MAAG-10609460b-37x25x4-M2-13343-DMo5 Brand: MetavCUT Material: M2 (1.3343) DMo5 Application: recycling and granulating for MAAG machines Facts Dimensions: 37 x 25 x 4 mm Material designation: M2 (1.3343) Suitable machines: MAAG shredders and granulators Special features Suitable for shredders, granulators and pelletisers Process‑optimised cutting geometry for low dust Precision replacement part for consistent pellet size Designed for productive, continuous use FAQ Which machines is this blade compatible with? The granulator blade 10609460b is designed for use in MAAG recycling, shredding and pelletising machines and fits the corresponding blade holders specified by MAAG. What advantages does M2 (1.3343) high‑speed steel offer for recycling blades? M2 (1.3343) high‑speed steel provides a blend of wear resistance and red hardness that keeps the blade sharp under heat and load, improving cutting life and pellet consistency for the granulator blade 10609460b. How do the dimensions affect installation and performance? The 37 x 25 x 4 mm specification ensures a precise seat and alignment in MAAG holders; accurate dimensions reduce vibration and help maintain consistent cutting geometry over the service life of the blade. Are MetavCUT blades equivalent to original parts? MetavCUT granulator blades are engineered as process‑optimised alternatives to original manufacturer parts, offering a cost‑effective option with precise fit, reliable durability and suitability for heavy production use, as demonstrated by the 10609460b item. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com MetavCUT provides an economical alternative to original manufacturer parts: process‑optimised wear components that fit precisely, offer extended service life and are engineered for intensive production use.
37 x 25 x 4 Granulator Knife, M2 1.3343 DMo5 - MetavCUT
Take advantage of a robust combination of wear-resistant M2 (1.3343 DMo5) tool steel and precision 37 x 25 x 4 dimensions to maintain steady production and consistent pellet quality; the design supports reduced dust formation and reliable operation in shredders and granulators. Order the replacement knife directly via Metav Werkzeuge or ask the consultants for compatibility details. Granulator knife 10616372 – 37 x 25 x 4, M2 (1.3343 / DMo5) by MetavCUT A granulator knife designed for shredders and granulators to reduce plastic waste, sprues, films, pipes and plates to a processable size while ensuring uniform cutting performance. M2 tool steel (1.3343 DMo5) – wear resistant Precision ground 37 x 25 x 4 dimensions Designed for shredders and granulators High cutting quality with low dust generation Consistent pellet quality through sharp, matched cutting edges A precisely ground blade with the specified 37 x 25 x 4 profile delivers consistent shearing forces in the cutting chamber, which directly improves the uniformity of pellets and regrind. The geometry and fit minimise chatter and uneven wear, resulting in stable throughput and fewer rejects. For processes where consistent particle size affects downstream drying, extrusion or remelting, this results in measurable improvements to product quality and reduced rework. Durable tool steel for predictable service life Manufactured from M2 (1.3343 DMo5) high-speed tool steel, the component offers elevated hardness and heat resistance compared with standard carbon steels, which supports long-term edge retention under abrasive conditions. The material choice is aimed at operators who prioritise predictable tool life and lower frequency of replacements, delivering a reliable balance between performance and maintenance intervals. For workshops and recycling plants, this translates into fewer stoppages and a more economical process over time. Reduced dust and improved machine hygiene Sharp, accurately profiled knives contribute to cleaner cutting with less micro-fracture of the polymer, which reduces airborne dust and fines. Lower dust generation decreases the burden on extraction systems and reduces contamination risks for downstream equipment. The result is a tidier production environment, improved filter life and a lower frequency of machine cleaning cycles, which together support uninterrupted production runs. Compatibility with shredders, cutter mills and granulators Engineered for use across shredding and granulating equipment, the blade is suitable for mechanical size reduction of a wide range of thermoplastics and associated materials such as sprues, films, tubes and sheets. The design supports both primary reduction in shredders and the precision cutting required in pelletising after extrusion. When correctly installed and aligned, the knife promotes even material flow and consistent end-product characteristics. Maintenance and replacement considerations for production uptime A precision-fit spare part reduces time spent on adjustment and run-in; the standardised 37 x 25 x 4 sizing allows systematic stocking and quick swap-outs. Regrinding strategies and edge preparation can extend life further, while periodic inspection for nicks or deformation protects the cutting set and counter-knife. Keeping matched sets and a schedule for blade checks helps maintain cutting quality and optimises the total cost of ownership for high-throughput recycling operations. Contact Metav Werkzeuge for tailored replacement knives and fast delivery from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 10616372 SKU: MAAG-10616372-37x25x4-M2-13343-DMo5 Material: M2 (1.3343 DMo5) Dimensions: 37 x 25 x 4 Facts Hardness / wear resistance: high (M2 tool steel) Precise dimensions: 37 x 25 x 4 (mm) Application: mechanical size reduction, pelletising Special features Intended use: shredders, cutter mills, granulators Benefits: consistent pellet quality, low dust generation Design: precision ground profile for exact fit Brand: MetavCUT FAQ What materials can this knife process? The granulator knife 10616372 is suitable for common thermoplastics and recycling feedstock such as sprues, films, pipes and plates, offering clean cutting and reliable size reduction for downstream processing. How does the M2 (1.3343 DMo5) material affect performance? M2 (1.3343 DMo5) provides enhanced hardness and heat resistance compared with standard steels, which helps the blade retain its edge longer and supports predictable service intervals in abrasive recycling applications. Is this knife compatible with all granulators? Compatibility depends on the machine’s knifeholder dimensions and mounting; the part is manufactured to the specified 37 x 25 x 4 profile and is intended for machines that accept that size and mounting arrangement. Can the blade be reground to extend service life? Yes, the blade geometry and material allow regrinding within recommended limits; correct reconditioning maintains cutting quality while prolonging the component’s useful life. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
37 x 25 x 4 Granulator/Chipper Knife M2 (1.3343 DMo5), For MAAG Recycling Machines - MetavCUT
Take advantage of the combination of robust M2 1.3343 DMo5 tool steel, precise dimensions and production-ready tolerances to maintain consistent pellet quality and minimise downtime. Order the knives directly via Metav Werkzeuge or consult our specialists for fitment and supply. Granulator knife 10609111 — granulating / shredder blade, 37 x 25 x 4 mm, M2 1.3343 DMo5 (MetavCUT) The Granulator knife 10609111 is a precision wear part for MAAG recycling and granulating systems, engineered to deliver consistent cut performance in shredders, granulators and pelletisers M2 1.3343 DMo5 high-speed tool steel Dimensions 37 x 25 x 4 mm For MAAG shredders and granulators Consistent pellet quality from a precision wear part This granulating blade is manufactured from M2 1.3343 DMo5, a high-speed tool steel chosen for its wear resistance and edge stability under high stress. The 37 x 25 x 4 mm geometry is ground to tight tolerances so that blade alignment and contact with counter knives remain uniform. The practical effect is a steady pellet size distribution and reduced fines and dust, which eases downstream screening and drying. For operations processing variable scrap streams, the combination of material and precision grinding reduces the need for frequent adjustments and preserves machine throughput. Improved uptime through durable design The tool steel and finish of the blade translate directly into longer service intervals. A harder, wear-resistant cutting edge maintains geometry longer, which reduces rework and replacement frequency. The result is fewer stops for knife changes, lower maintenance labour and a more predictable production schedule. Where consistent throughput and minimal unplanned downtime are priorities, a robust wear part like this supports higher operational efficiency and predictable output. Easy integration with MAAG systems and safe handling Designed for MAAG machines, the blade matches common mounting patterns and fits into typical granulator and shredder assemblies used in plastics recycling. The precise sizing and flatness cut down on setup time during knife changes and help to ensure proper clearances with the counter knife. When fitted correctly, the combination of correct geometry and material properties yields a clean shearing action that lowers mechanical stress on shafts and bearings, contributing indirectly to longer machine life. Practical benefits for recycling and granulation processes In recycling lines and pelletising plants, sharp and well-fitting knives improve product quality and reduce secondary processing. This blade supports cutting of films, pipes, sprues and plates as well as the regular chopping of extruded strands into uniform pellets. Cleaner cutting means less dust, better melt homogeneity and fewer reject fractions—factors that enhance both process economics and final product quality. For operators who require repeatable results, the blade’s construction provides a balance of cutting performance and wear life. We offer an economical alternative to OEM parts under the MetavCUT label; these process-optimised wear parts are precision-made, durable and intended for continuous, productive use. For production-proven wear parts and supply coordination, contact Metav Werkzeuge to specify MetavCUT granulator knives and secure dependable delivery from our Emmerich facility Technical data SKU: MAAG-10609111-37x25x4-M2-13343-DMo5 Item number: 10609111 Brand: MetavCUT Application: MAAG recycling, shredding and granulating systems Facts Dimensions: 37 x 25 x 4 mm Special features Material: M2 1.3343 DMo5 (high-speed tool steel) Use: Cutting plastic waste, sprues, films, pipes, plates; granulation of melt or strands into pellets Function: Wear part for shredders, granulators and pelletisers Compatibility: Suitable for MAAG machines FAQ Are these knives compatible with all MAAG granulators? Compatibility depends on the specific MAAG model and the knife holder design; the MetavCUT Granulator knife 10609111 is made to fit MAAG recycling and granulating systems that accept 37 x 25 x 4 mm blades What material is used and why does it matter? The blade is made from M2 1.3343 DMo5 high-speed tool steel; this material keeps a reliable cutting edge under abrasive conditions and extends service life compared with softer steels How does the blade affect pellet quality? A precision-ground geometry and stable edge reduce fines and dust, producing a more uniform pellet size and improving downstream screening and processing Can this knife be re-sharpened or must it be replaced? Depending on wear and operational economics, the MetavCUT knife can be re-ground where appropriate; many workshops choose reconditioning while others fit new blades for guaranteed tolerances Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37 x 25 x 4 Granulator/Shredder Knife, EW9Co10 1.3207 - MetavCUT
Reliable, precision-engineered wear part made from 1.3207 EW9Co10 and sized 37 x 25 x 4, tailored for MAAG recycling and pelletising equipment; ensures precise cutting, reduced dust and consistent pellet quality. Combine long service life with quick replacement to keep production flowing. Order the knife directly via Metav Werkzeuge or ask our consultants if needed. Granulator Knife 37 x 25 x 4 — Granulation / Shredding Blade (1.3207 EW9Co10) by MetavCUT The Granulator Knife 37 x 25 x 4 is a dedicated wear part for MAAG recycling and pelletising machines, engineered to deliver accurate shearing of plastic waste and uniform regranulate. Material grade 1.3207 EW9Co10 Precise dimensions 37 x 25 x 4 mm Designed for MAAG recycling systems Optimised for clean pelletising performance Precision fit that prevents unplanned downtime A correctly matched cutting edge is crucial in continuous processing. The replacement blade, manufactured to the exact 37 x 25 x 4 specification, provides a secure, repeatable fit in MAAG assemblies and reduces play between blade and counterknife. The use of grade 1.3207 EW9Co10 as the specified material contributes to consistent edge geometry and wear behaviour, which in turn reduces the frequency of adjustment and rework. This precise compatibility translates into fewer stops for realignment and a more stable production rhythm, helping to protect cycle times and throughput. Consistent pellets and less dust for downstream quality Sharp, well‑mounted knives directly influence the geometry and surface of the cut material. The blade’s ground edge supports uniform chip formation, producing consistent pellets and minimising fines and dust. Reduced dust generation benefits both product yield and housekeeping: it lowers filter loads, improves material handling downstream and reduces the risk of contamination in regrinding loops. The result is a cleaner process and a higher proportion of first‑grade regranulate, improving material value and reducing additional processing steps. Durable performance and efficient replacement strategy The component is intended as a wear part for grinding and granulating tasks and is manufactured with production use in mind. The selected grade and precise tolerances deliver predictable wear curves, allowing maintenance planners to schedule blade changes rather than react to sudden failures. When a replacement is required, the standardised 37 x 25 x 4 format and clear article reference simplify stock management and minimise machine downtime during service interventions. The combination of longevity and straightforward changeover reduces total cost of ownership across the production chain. With our MetavCUT range, Metav provides an economical alternative to original manufacturer parts: the process‑optimised wear parts are precisely matched, durable and developed specifically for heavy production environments. For guaranteed fit and fast supply of MetavCUT granulator knives for MAAG systems, contact Metav Werkzeuge — our specialists are available to advise and arrange prompt delivery. Technical Data Article number: 10616372 SKU: MAAG-10616372-37x25x4-13207-EW9Co10 Manufacturer: MetavCUT Facts Dimensions: 37 x 25 x 4 Special features Material: 1.3207 EW9Co10 Suitable for: MAAG recycling and granulation machines Application: shredding and granulating plastics FAQ Is this knife compatible with MAAG granulators? Yes. The Granulator Knife 37 x 25 x 4 is specified for MAAG recycling and pelletising machines and is manufactured to the dimensions and tolerances required for direct fitment. What advantages does the 1.3207 EW9Co10 material provide? The blade material 1.3207 EW9Co10 is selected for its consistent wear behaviour in cutting applications, helping the knife keep a sharp edge longer and supporting predictable replacement intervals for the MetavCUT wear part. How does this blade influence pellet quality? A well‑ground edge and exact fit ensure uniform shearing, producing consistent pellets with fewer fines and reduced dust generation compared with worn or mismatched blades. Can the knife be stocked as a standard spare? Yes. The standard dimensions (37 x 25 x 4) and the article reference 10616372 make the item suitable for stock rotation and planned maintenance programmes for MAAG systems. What is the designated article number or SKU for ordering? Order using Article number 10616372 or SKU MAAG-10616372-37x25x4-13207-EW9Co10 to ensure the correct MetavCUT granulator knife is supplied. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37.72 x 39.76 x 4 Granulator Knife For Recycling And Shredding Applications, 1.3207 EW9Co10 - MetavCUT
Benefit from reliable cutting performance and a precise fit: the combination of the 1.3207 EW9Co10 high-alloy material and the exact 37.72 x 39.76 x 4 mm dimensions yields consistent pellet quality and reduced machine downtime. Order the replacement directly via Metav Werkzeuge or contact our consultants for specification support. Granulator knife / Shredding blade 37.72 x 39.76 x 4 – MetavCUT 60108762 for MAAG machines The Granulator knife 60108762 is a precision wear part designed for use in MAAG recycling and pelletising equipment, suitable for shredding and granulating a wide range of plastic wastes. Precision-cut 37.72 x 39.76 x 4 mm High-alloy 1.3207 EW9Co10 construction Compatible with MAAG recycling machines Designed for consistent pellet quality Consistent pellet quality through precise cutting A well-honed granulator knife directly affects output consistency. This blade’s geometry and edge finish support an even cut, which promotes uniform pellet size and reduces fines and dust formation. In practice, a consistent cut simplifies downstream sieving and drying processes and stabilises material flow through pelletisers, translating into fewer rejects and more predictable production yields. Durability tailored for continuous operation Manufactured from 1.3207 EW9Co10, the component is specified as a wear part suited to repetitive shearing tasks. The chosen alloy supports long running intervals under standard recycling loads, helping to maintain cut quality over time. Using a replacement that matches the original material specification reduces the risk of premature wear and the need for frequent regrinds, supporting continuous operation in industrial environments. Exact fit that reduces maintenance time With the nominal dimensions 37.72 x 39.76 x 4 mm, the blade is produced to match MAAG mounting interfaces precisely. Accurate tolerances minimise the need for additional fitting work and help ensure correct blade alignment in rotors and knife holders. Correct fitment improves cutting geometry retention and reduces vibration, which in turn lowers the likelihood of collateral wear on housings and fastenings. Operational benefits for recycling workflows Sharp, correctly matched knives reduce mechanical stress on the drive system and contribute to a more efficient material feed. Improved cutting action means lower motor loads at equivalent throughput, and a more uniform particle size distribution eases material handling and quality control tasks further downstream. The part is therefore a practical choice for operators seeking to optimise cycle times and overall plant efficiency. Practical considerations for replacement strategy As a process-optimised wear item, this granulator blade is intended for regular replacement as part of a planned maintenance cycle. Stocking blades with the exact MAAG-compatible specification reduces downtime during service intervals. MetavCUT supply aims to provide an economical alternative to original parts while preserving functional compatibility and production-ready robustness. With its combination of precise dimensions, material specification and intended applications in shredders and pelletising systems, this blade supports stable, productive recycling operations. We offer a cost-effective alternative to original manufacturer parts under the MetavCUT brand: our process-optimised wear parts are precisely fitted, durable and developed specifically for productive use. For prompt supply of MetavCUT replacement knives and tailored advice on MAAG-compatible part 60108762, contact Metav Werkzeuge to secure reliable performance and minimise production interruptions. Technical data Article number: 60108762 SKU: MAAG-60108762-37.72x39.76x4-13207-EW9Co10 Material: 1.3207 EW9Co10 Dimensions: 37.72 x 39.76 x 4 mm Brand: MetavCUT Application: Granulating and shredding in recycling systems Facts Dimensions: 37.72 x 39.76 x 4 mm Article number: 60108762 Special features Granulator and shredding knife Specified material: 1.3207 EW9Co10 Compatible with MAAG recycling and pelletising machines Process-optimised wear part for industrial use Manufacturer: MetavCUT FAQ What applications is this blade suitable for? The blade is designed for use in granulators and shredders and is suitable for reducing plastic waste to a processable size in recycling and pelletising operations; the MetavCUT 60108762 blade is specified for MAAG machines. How does the material 1.3207 EW9Co10 affect performance? The material designation 1.3207 EW9Co10 identifies the alloy used for this wear part; the MetavCUT blade is made from this specified material to meet the demands of repetitive cutting and abrasive conditions in recycling equipment. Is the blade compatible with MAAG rotors and holders? Yes, the MetavCUT 60108762 blade is produced to the stated dimensions and is compatible with MAAG recycling and granulation systems that use the corresponding knife format. What benefits does a precise blade size provide? Exact dimensions minimise installation adjustments and help maintain correct cutting geometry, which results in more uniform pellets, less dust and reduced mechanical stress on the machine. Can this knife be used for different plastics and shapes? The knife is intended for general recycling tasks including films, pipes, plates and sprues; blade performance will depend on machine setup and the processed material, with the MetavCUT 60108762 optimised for broad recycling use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37.72 x 39.76 x 4 mm Granulator Knife M2 1.3343 DMo5, For Maag Recycling Machines - MetavCUT
Take advantage of precision-ground M2 (1.3343/DMo5) construction, exact dimensions and compatibility with MAAG shredders to secure consistent pellet quality and reduced downtime. Order this spare part directly via Metav Werkzeuge or consult the specialists for fitment advice. Granulator knife 37.72 x 39.76 x 4 mm — MetavCUT M2 (1.3343 / DMo5) The Granulator knife 37.72 x 39.76 x 4 mm is a wear part designed for sizing and pellet production in industrial recycling and granulation equipment, compatible with MAAG machines. Precision-ground M2 tool steel for durability Exact dimensions 37.72 x 39.76 x 4 mm Designed for MAAG shredders and granulators Low dust generation and consistent pellet size Reliable cutting performance that keeps production flowing The M2 (1.3343 / DMo5) construction provides a balance of hardness and toughness that supports long service intervals and consistent cutting. Manufactured to the stated dimensions, the knife maintains a stable cutting geometry that reduces material recirculation and rejects. As a critical wear part in shredders and granulators, this blade contributes to predictable machine behaviour and simplified maintenance planning. The result is improved throughput and fewer unplanned stoppages thanks to consistent edge retention and shape stability. Cleaner output and process efficiency from sharp, precise edges A precisely ground cutting edge delivers uniform strand size and cleaner cuts, which in turn reduce fines and dust during processing. That reduction in dust lowers downstream filtration load and can reduce material loss, improving yield from recycled feedstock. Using a blade engineered for granulating and shredding functions supports an even pellet size distribution, which benefits extrusion and reprocessing steps. The combination of accurate geometry and appropriate material grade enables efficient operation at typical production speeds for granulation systems. Supply reliability, fitment certainty and sustainable operation Sourcing wear parts with exact fit and known material properties minimises installation time and the risk of incorrect replacements. Delivery from an established supplier in Emmerich ensures a transparent supply chain and quicker restocking for production-critical components. MetavCUT spare knives are produced with process optimisation in mind to match OEM fitment where required, securing a cost-effective alternative without compromising on functionality. Mit unserer Marke MetavCUT bieten wir eine wirtschaftliche Alternative zu Hersteller-Originalteilen; unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. For MetavCUT spare knives and confident fit for MAAG equipment, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich Technical data Article number / SKU: MAAG-60108762-37.72x39.76x4-M2-13343-DMo5 / 60108762 Label: Zerkleinerungsmesser / Granuliermesser 37.72 x 39.76 x 4 60108762 für MAAG Maschinen aus M2 1.3343 DMo5 Material: M2 (1.3343 / DMo5) Dimensions: 37.72 x 39.76 x 4 mm Brand: MetavCUT Compatible with: MAAG recycling and granulation machines Facts Dimension: 37.72 x 39.76 x 4 mm Material grade: 1.3343 (M2 / DMo5) SKU / Article number: 60108762 Special features For shredders, cutting mills and granulators Engineered for consistent pellet size Sharp, precision-ground cutting edge Reduced dust and fines during operation Process-optimised wear part for production use FAQ What materials can this knife process? The granulator knife supplied under MetavCUT and article 60108762 is intended for common plastics processing tasks in shredders and granulators; material-specific performance depends on the machine setup and processing parameters. Is this knife a direct replacement for MAAG originals? This MetavCUT knife is designed for compatibility with MAAG recycling and granulation machines and offers a process-optimised alternative to original manufacturer parts; check the article number 60108762 against machine specifications for confirmation. How does the M2 material affect service life? M2 (1.3343 / DMo5) offers a balance of hardness and toughness that supports extended edge retention under typical granulation conditions, thereby reducing frequency of replacements. What benefits does precise dimensioning provide? Exact dimensions (37.72 x 39.76 x 4 mm) ensure correct seating and cutting geometry in the rotor, promoting uniform pellet size and stable machine performance. Are there recommendations for regrinding or sharpening? Sharpening intervals depend on throughput and material abrasiveness; when reconditioning the blade, maintain original geometry to preserve pellet quality and fit. MetavCUT — Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 10 x 2.8/3.8 x 40D Granulator And Shredder Knife, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of precision-ground cutting edges, robust 1.3207 EW9Co10 alloy and exact fit for ECON systems to maintain a steady production flow and consistent pellet quality; Order the ECON01 shredding and granulator knife directly via (Metav Werkzeuge) or ask our consultants if needed. ECON01 Shredding and Granulator Knife — 40 x 10 x 2.8/3.8 x 40D, 1.3207 EW9Co10 (MetavCUT) A ECON01 knife engineered as a wear part for shredders and granulators in ECON recycling systems, designed to deliver consistent particle size and reduced dust during continuous operation. High-wear alloy 1.3207 EW9Co10 Precision-ground cutting edges Designed for ECON shredders and granulators Low dust and consistent pellet quality Reliable cuts that improve downstream quality The knife is made from 1.3207 EW9Co10, a high-performance tool alloy chosen for its balance of hardness and toughness. In practical terms, this material supports longer tool life under the impact and abrasion typical of recycling applications while keeping the edge geometry stable. The result is consistent cut quality, which reduces fines and minimises the generation of dust during shredding or pelletising. For operators focused on yield and regrind quality, a stable edge profile directly improves downstream processes such as sieving and extrusion. Fewer stoppages through durable construction Constructed as a central wear part for shredders, cutting mills and granulators, the ECON01 is precision-ground to close tolerances so it seats accurately in rotors and cutting assemblies. Accurate seating reduces vibration and uneven wear, contributing to predictable maintenance intervals and fewer unscheduled stops. This increase in operational reliability translates into measurable productivity gains and lower overall maintenance effort for a continuous recycling line. Designed for smooth integration and consistent throughput The ECON01 knife matches the form and function expected in ECON recycling equipment, with the 40 x 10 x 2.8/3.8 x 40D profile tailored for standard installations. In shredding applications it converts bulky input — such as film, pipes, sprues or sheets — into manageable pieces; in granulation it ensures even pellet geometry after extrusion. The precision fit and consistent edge quality help reduce process variation and support higher throughput without compromising the regrind uniformity required for re-extrusion. Contact Metav Werkzeuge for tailored advice on MetavCUT ECON01 blades to secure reliable throughput and optimised regranulate quality Technical data Article number: ECON-ECON01-40x10x2.8/3.8x40D-13207-EW9Co10 Name: Shredding knife / Granulator knife ECON01 Material: 1.3207 EW9Co10 Dimensions: 40 x 10 x 2.8/3.8 x 40D Manufacturer: MetavCUT Core data SKU: ECON-ECON01-40x10x2.8/3.8x40D-13207-EW9Co10 Profile: 40 x 10 x 2.8/3.8 x 40D Material grade: 1.3207 EW9Co10 Applications & features Suitable for ECON recycling, shredding and pelletising systems Central wear part in shredders, cutting mills and granulators Precision-ground cutting edges for consistent pellet geometry Reduces dust and fines for improved downstream processing FAQ What materials are suitable for processing with this knife? The ECON01 is intended for common plastic recycling tasks including film, pipes, sprues and sheets; its design supports both shredding and granulating applications where consistent particle size is required. How is the ECON01 supplied for installation in ECON machines? The knife is manufactured to the stated profile and tolerances so it fits ECON rotors and cutting assemblies; the 40 x 10 x 2.8/3.8 x 40D geometry corresponds to standard mounting and seating requirements. What performance advantage does the 1.3207 EW9Co10 material provide? The 1.3207 EW9Co10 alloy combines wear resistance with edge stability, helping the knife maintain cutting geometry longer under abrasive and impact loading typical in recycling operations. How does the knife affect dust and regranulate quality? Sharp, precision-ground edges reduce fragmentation and fines during cutting; this lowers dust generation and yields a more uniform regranulate that is easier to handle in extrusion and sieving stages. Is this a direct alternative to original manufacturer parts? The ECON01 from MetavCUT is offered as a process-optimised wear part that is dimensionally compatible with ECON equipment and developed for productive, heavy-duty use. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process-optimised wear parts are precisely matched, long-lasting and specifically developed for productive operation.
40 x 10 x 2.8/3.8 x 40D Granulator Knife For ECON Machines M2 1.3343 DMo5 - MetavCUT
Take advantage of the combination of precise cutting geometry, robust M2 tool steel and straightforward maintenance to keep production flowing with minimal downtime; order through Metav Werkzeuge or consult their specialists for compatibility and delivery options. ECON01 Granulator and Shredder Knife — M2 tool steel, 40 x 10 x 2.8/3.8 x 40D The ECON01 is a granulator and shredding knife designed for ECON recycling machines, engineered to deliver consistent pellet quality in continuous processing environments. Robust M2 tool steel construction Precision ground cutting edges for consistent pellets Direct replacement for ECON recycling systems Reduced dust generation for cleaner operation Consistent pellet quality through precise cutting geometry A clean, repeatable cut is central to efficient pellet production. The finely finished cutting edge on this wear part keeps shear forces consistent, producing uniform pellet size and reducing fines and dust. That outcome improves downstream screening and drying efficiency and lowers rework rates. The geometry has been optimised for steady feed and minimal material smearing, which also contributes to longer intervals between service interventions and a more reliable production rhythm. Durable M2 tool steel for predictable wear performance Manufactured from M2 1.3343 (DMo5) high-speed tool steel, the blade offers high hardness and thermal stability for repetitive cutting tasks in recycling and granulation. The material choice provides superior wear resistance compared with softer steels while remaining regrindable to restore cutting geometry on-site or via service partners. Predictable wear behaviour simplifies spare-part planning and reduces unexpected stoppages, supporting continuous throughput and lower lifecycle costs per tonne of processed material. Compatibility and straightforward maintenance for high uptime Sized at 40 x 10 x 2.8/3.8 x 40D, the knife is produced to fit ECON granulators and shredders without modification, enabling rapid swap-out during scheduled maintenance. The blade’s finish and tolerance support plug-and-play replacement, which shortens machine downtime and simplifies inventory management. Supplied as a production-ready wear part, it aligns with industrial maintenance regimes and is suitable for processing a broad range of plastics in recycling lines, from films and pipes to sprues and offcuts, while helping to maintain a cleaner working environment. For tailored advice on fitment to ECON machines, batch availability or technical drawings, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com — their specialists will advise on selection, supply and delivery. Technical Data SKU: ECON-ECON01-40x10x2.8/3.8x40D-M2-13343-DMo5 Label: Zerkleinerungsmesser / Granuliermesser 40 x 10 x 2.8/3.8 x 40D ECON01 für ECON Maschinen aus M2 1.3343 DMo5 Manufacturer: MetavCUT Material: M2 1.3343 DMo5 Dimensions: 40 x 10 x 2.8/3.8 x 40D Facts Blade length: 40 mm Blade width: 10 mm Thickness: 2.8/3.8 mm Reference: 40D cutting diameter Special features Application: shredders, granulators, pelletisers Suitable for: recycling plants and granulation systems of ECON Benefit: reduced dust and improved pellet consistency Finish: precision ground cutting edges FAQ What materials can this knife process? The ECON01 granulator knife is intended primarily for polymer recycling applications and is used to cut plastics such as films, pipes and sprues in ECON shredders and granulators. Is the ECON01 suitable as a direct replacement in existing ECON machines? Yes — the ECON01 is manufactured to the specified dimension set for ECON systems and is supplied for direct fitment in compatible granulators and shredders. How does the M2 1.3343 (DMo5) material affect service life? Blades made from M2 1.3343 (DMo5) offer a balance of hardness and toughness that extends the service interval and allows economical regrinding to restore cutting geometry when required. Can the knife be reground on-site, or is specialist service required? The ECON01 blade is designed to be regrindable; reconditioning can be carried out by qualified workshop personnel or returned to a service partner to restore edge geometry. Where to request technical drawings or batch pricing? Technical drawings, batch availability and pricing information are available from Metav Werkzeuge; reference the SKU ECON-ECON01-40x10x2.8/3.8x40D-M2-13343-DMo5 when enquiring. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Mit unserer Marke MetavCUT bieten wir eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Prozessoptimierte Verschleißteile, passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40 x 10 x 2.8/35D Granulator Knife For Recycling Machines, M2 1.3343 DMo5 - MetavCUT
Benefit from precise geometry and durable M2 tool steel for consistent pellet quality and reduced dust generation; order compatible spare knives directly via Metav Werkzeuge or consult the sales team for compatibility and delivery. ECON01 granulator knife — Granulating and shredding blade, M2 tool steel, 40 x 10 x 2.8/35D The ECON01 is a granulating and shredding blade engineered for use in ECON recycling and pelletising systems, combining precise cutting geometry with high-wear material for continuous industrial operation M2 tool steel for high wear resistance Precise 40 x 10 x 2.8/35D dimensions Designed for ECON recycling systems Sharp, uniform cutting edge for low dust Consistent output through exact cutting geometry A granulator's efficiency depends on a blade that delivers uniform cuts; the 40 x 10 x 2.8/35D profile provides repeatable geometry, which results in consistent pellet size and more stable downstream processing. Precision in the blade thickness and bevel reduces material rebound and prevents oversized fragments, supporting steady throughput and minimising rework. The specified profile is particularly advantageous in systems where pellet homogeneity and low fines are required for direct reprocessing into extrusion or injection moulding. Durable performance from M2 high-speed tool steel Constructed from M2 1.3343 DMo5 high-speed tool steel, the knife offers elevated wear resistance and thermal stability compared with standard carbon steels. This material choice extends service life under abrasive conditions common in plastic recycling, including operations with films, pipes and mixed-production sprues. The higher red-hardness of the steel preserves a sharp edge for longer, reducing frequency of blade changes and delivering a favourable cost-per-tonne processed figure for high-volume production environments. Improved plant cleanliness and operational reliability A sharp, well-matched cutting edge reduces dust generation and the occurrence of fines, contributing to a cleaner working environment and less material loss. The blade’s geometry and finish promote low vibration and balanced cutting forces, which helps to maintain rotor and knife-holder integrity over time. Compatibility with ECON shredders and pelletisers ensures proper fitment, enabling straightforward replacement without extensive setup. Where regular exchange intervals are part of maintenance scheduling, using a dimensionally accurate spare supports predictable downtime planning. With the MetavCUT approach to spare parts, operational continuity is prioritised alongside cost efficiency. Our process-optimised wear parts are produced to match original machine interfaces and to withstand the demands of continuous recycling production. With precise tolerances and robust material selection, the result is reliably consistent cutting performance that supports production targets. We provide for operators and procurement teams a direct supply route from stock in Emmerich, backed by technical data and fitment confirmation to assist specification and planning. With our MetavCUT range customers receive an economic alternative to original manufacturer parts: process-optimised wear parts that are precision-fit, long-lasting and developed for productive industrial use Select MetavCUT blades via Metav Werkzeuge to secure compatible, production-ready replacements for ECON systems and arrange specification checks with our sales team at Metav Werkzeuge Technical data Article number: ECON-ECON01-40x10x2.8/35D-M2-13343-DMo5 Material: M2 1.3343 DMo5 Designation: ECON01 Brand: MetavCUT Core data Dimensions: 40 x 10 x 2.8/35D Suitable for: Recycling and granulating applications Compatible with: ECON shredders and pelletisers UID: ECON-ECON01-40x10x2.8/35D-M2-13343-DMo5 Special features Sharp uniform cutting edge Process-optimised fit for holder interfaces Low dust generation Durable high-speed tool steel FAQ What materials can this knife process? The ECON01 granulator knife, made from M2 1.3343 DMo5, is intended for common recycling tasks such as cutting films, pipes, sprues and other plastic waste in ECON shredders and pelletisers. How does M2 material affect service life? M2 tool steel in the ECON01 blade provides higher wear resistance and thermal stability, extending edge life under abrasive conditions and reducing blade-change frequency. Is the ECON01 directly compatible with ECON machines? Compatibility is designed for ECON recycling and granulating machines; the blade’s 40 x 10 x 2.8/35D profile matches standard ECON knife holders for direct replacement. Can the blade reduce dust and fines during processing? A sharp, accurately ground cutting edge on the ECON01 promotes cleaner cuts, lowering dust and fines compared with worn or mismatched blades. How should the part be specified when ordering? Reference the article number ECON-ECON01-40x10x2.8/35D-M2-13343-DMo5 and the designation ECON01 to ensure the correct MetavCUT granulator knife is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 20 x 1.6 x 40D Granulator/Crushing Knife, 1.3207 EW9Co10 - MetavCUT
The precision of the ECON04 blade, realised in high-alloy 1.3207 EW9Co10, and its exact 40 x 20 x 1.6 x 40D profile ensure durable cutting performance and uniform pellet output; order the blade directly via Metav Werkzeuge or consult our specialists for application-specific advice. ECON04 Granulator and Shredder Blade — 1.3207 EW9Co10, 40 x 20 x 1.6 x 40D (MetavCUT) The ECON04 is a granulator and shredder blade engineered for ECON recycling systems, optimised to reduce plastic waste to processable sizes and to deliver consistent pelletising results. MetavCUT ECON04: 1.3207 EW9Co10 high-alloy steel Precision-ground 40 x 20 x 1.6 mm profile Compatible with ECON granulators and shredders Optimised for consistent pellet quality Proven cutting performance for continuous recycling The blade is manufactured from 1.3207 EW9Co10, a high-alloy steel grade selected for its wear resistance and edge stability. This material provides a reliable baseline for long tool life under the cyclic loads typical in shredders and granulators. The combination of the alloy composition and the precision grind reduces flank wear, which preserves cutting geometry and extends service intervals. As a result, plants can rely on steady throughput and a predictable maintenance rhythm, supporting efficient line planning and reduced unscheduled downtime. Precision geometry that supports uniform pellets and low dust A precisely produced edge geometry is crucial for pellet quality. The 40 x 20 x 1.6 x 40D specification denotes the blade's working profile and cutting radius, tailored to match the rotor and fixed-knife arrangements found in ECON equipment. This controlled geometry enables clean shearing of film, pipes, sprues and bulk scrap, which in turn produces uniform pellets and minimises fines and dust. Reduced dust not only improves material yield but also lowers cleaning effort and the risk of contamination in subsequent processing stages. Durable design for productive, process-ready operation The blade is a process-optimised wear part designed for productive use in industrial recycling and pelletising lines. Heat treatment and finishing steps produce an edge that balances toughness with hardness, delivering resistance to chipping while maintaining sharpness over extended runtimes. The result is a component that supports constant quality output and predictable replacement cycles; this supports overall equipment effectiveness and contributes to a lower cost per kilogram of recycled material processed. Compatibility and practical handling on ECON systems Designed specifically for ECON shredders and granulators, the blade aligns with the manufacturer's mounting and dimensional standards to ensure fitment without modification. Precision in the blank dimensions and the drilled profile (where applicable) reduces fitting time during maintenance windows and helps maintain optimal rotor clearances. Spare-part planning therefore becomes straightforward: labelled stock can be rotated into production quickly, and service teams benefit from a consistent part geometry that matches machine tolerances. We offer an economical alternative to original manufacturer parts under the MetavCUT brand: our process-optimised wear parts are precisely fitting, durable and specifically developed for productive use. Contact Metav Werkzeuge today to discuss how MetavCUT ECON04 blades can improve pellet quality and uptime, and to arrange fast supply from our Emmerich warehouse. Technical data Article number: ECON-ECON04-40x20x1.6x40D-13207-EW9Co10 Name: ECON04 granulator/shredder blade Material: 1.3207 EW9Co10 Dimensions: 40 x 20 x 1.6 x 40D Manufacturer: MetavCUT Facts Size specification: 40 x 20 x 1.6 x 40D Material grade: 1.3207 EW9Co10 SKU: ECON-ECON04-40x20x1.6x40D-13207-EW9Co10 Special features Application: shredding, granulating, pelletising Compatibility: ECON recycling and granulator machines Benefit: consistent pellet quality, reduced dust Design: precision-ground cutting edge, process-optimised wear part FAQ What materials can this blade process? The ECON04 blade, made from 1.3207 EW9Co10 steel, is intended for processing typical plastics encountered in recycling lines, including films, pipes, sprues and plates as specified for ECON shredders and granulators. How does the ECON04 influence pellet quality? A precision-ground geometry and stable edge retention ensure clean shearing and uniform fragment size, which helps produce consistent pellets and reduces fine dust during pelletising. Is the ECON04 compatible with all ECON machines? The blade is specified for ECON shredders and granulators; compatibility details such as mounting and rotor clearance should be checked against the machine's parts list to ensure correct fit. What replacement benefits does this MetavCUT blade offer compared with OEM parts? MetavCUT ECON04 blades are process-optimised to match machine tolerances, offering precise fit, robust edge life and consistent output quality as an economical alternative to original manufacturer components. MetavCUT / Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision-fit recycling knives that keep production moving
Recycling knives — also referred to as shredder blades or granulator knives — are wear parts engineered for size reduction and material preparation in industrial recycling. Metav supplies fit-for-purpose replacement and wear parts under the MetavCUT brand; these are not original parts from the machine manufacturers but are designed for precise compatibility and reliable performance.
Where these knives are used and how they work
Recycling knives perform the cutting and shearing tasks in waste-processing equipment, converting mixed input streams into consistent fractions. Typical applications include shredders, granulators, cutting mills and granulator systems, as well as ancillary equipment such as friction washers and screening machines. Designed geometry and edge preparation determine cutting quality, throughput and resistance to abrasion; tailored blade profiles enable efficient shredding across a wide range of materials while reducing peak loads on shafts and bearings.
Clear benefits for workshop and production managers
- reduced downtime — rapid replacement with ready-to-fit MetavCUT knives lowers machine standstill.
- consistent particle size — optimised blade geometry for predictable downstream processing.
- extended service life — wear-resistant design and quality-controlled production increase run times.
- simplified procurement — common items kept in stock for fast availability.
- adaptability — compatible blade shapes and edge types for different materials and machine concepts.
Metav as the practical partner for precision in recycling
Metav stands for democratisation of precision: a quality filter based in Emmerich that combines decades of expertise with a broad range of industrial supplies. With over 48,000 customers and a catalogue of more than 250,000 products, Metav offers the scale and know-how that workshop managers rely on. The MetavCUT range represents the brand’s own engineered solution for replacement and wear parts in recycling plants, making it a pragmatic choice for organisations seeking dependable alternatives to original equipment.
Technical data (at a glance)
- tailored replacement and wear parts for recycling plants
- common items held in stock for: shredders, granulators, cutting mills, granulator systems, friction washers, screening machines
- MetavCUT own-brand components, not original manufacturer parts
FAQ
Are MetavCUT recycling knives compatible with different machine brands?
MetavCUT recycling knives are engineered as fit-for-purpose replacement parts and are available in profiles and sizes suitable for a wide range of shredder and granulator makes.
How do I choose the right recycling knife or shredder blade for a specific material?
Select a recycling knife based on material hardness, abrasiveness and desired particle size; granulator knives with specific edge geometry are recommended for brittle plastics, while robust blade profiles suit mixed municipal waste.
What maintenance extends the life of granulator knives?
Regular inspection, correct mounting torque and timely rotation or replacement of blades maintain cutting geometry and reduce uneven wear on the machine.
Are these replacement parts original equipment?
No — the recycling knives are MetavCUT own-brand replacement and wear parts, manufactured to provide precise fit and consistent performance without being original manufacturer components.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com