Twist Drill (Type N) — 0.3 mm diameter, 118° point angle, Short execution, Black, HSS, DIN 338, suitable for Drilling Machine, MetavCUT The Twist Drill (Type N) is a short HSS metal drill designed for precise, stable drilling in metal on a Drilling Machine, offering a 0.3 mm diameter and a 118° point angle for improved centring. Short design for high stability and precision HSS material for metal and alloyed steel drilling 118° point angle improves centring on curved surfaces Conforms to DIN 338 for short Twist Drills Precision and stability for demanding metal work The short construction of this Twist Drill delivers enhanced stability and reduced runout, which leads to more accurate holes in small diameters. Thanks to the compact geometry, axial and radial deflection are minimised, so shops and workshops achieve consistent hole quality. As a Type N tool, this drill is optimised for metal applications where controlled centring and repeatable results matter. Material advantages: why HSS matters for metal drilling Manufactured from HSS (High Speed Steel), the cutter provides a balanced combination of toughness and hardness suitable for alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics. The low-temperature rolling process used for these drills increases elasticity and reduces fracture risk, especially for diameters below 6 mm. This material choice supports longer tool life under standard workshop conditions. Geometry and application: the role of the 118° point and short flute A 118° point angle means easier penetration and improved self-centring on softer to medium-hard materials, while the shorter flute length reduces chatter and enhances rigidity. This geometry makes the bit particularly effective when used in a steady Drilling Machine setup and for tasks that demand precise start holes, such as model work, precision engineering or small-part fabrication. Who benefits and how to integrate it into the workflow Precision shops, prototyping facilities and maintenance departments that require dependable small-diameter metal holes will find this short Twist Drill well suited to their needs. Its robust design favours repeated use in production runs where stable clamping and correct feeds are applied. For operators unfamiliar with feed rates and coolant strategies, a brief setup check avoids common errors and secures consistent results. Strong recommendation: Select the MetavCUT Twist Drill Type N for precise, reliable metal drilling — for personalised technical advice and support contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 40003-FDA Diameter: 0.3 mm Point Angle: 118° Overall Length: 22 mm Spiral Length: 6 mm Execution: Short Type: Type N Material: HSS For Machine: Drilling Machine Colour: Black Standard: DIN 338 Applications: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this tool best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is ideal for alloyed and unalloyed steel, cast iron, non-ferrous metals and some plastics, offering reliable performance in typical metalworking tasks. Which three main drill types exist? The three principal drill types are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill is a Metal drill designed specifically for metalworking applications. Why are Twist Drills point-ground? The point grinding reduces the cross-cut at the tip of the Twist Drill, which significantly lowers friction and the required feed forces, while improving centring of the tip in the workpiece for more accurate starts. Can a metal Twist Drill be used to drill wood? A Metal Twist Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with a dedicated Wood drill; however, the Metal drill is easier to resharpen and shows less self-feed. For which drilling depths is the Twist Drill most commonly used? A hole drilled through solid stock is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool, as in many MetavCUT workshop applications. Is HSS better than HSSE? The common belief that HSSE steels are categorically superior to HSS is incorrect. Assess whether the working conditions justify the higher purchase cost of HSSE before deciding; for many standard metalworking tasks, HSS offers an excellent cost-performance ratio.

Twist Drill — Type N Short HSS, 0.4 mm, 118° Tip, Black, DIN 338 The Twist Drill Type N short HSS is a precision metal drilling bit designed for stable, accurate drilling in metalworking applications. Short HSS design for high stability DIN 338 short version for precision work 118° tip angle for reliable centering 0.4 mm diameter for fine, accurate holes Suitable for Drilling Machine use Highest precision for demanding metal holes This short HSS Twist Drill from MetavCUT delivers notable Precision when drilling small-diameter holes in metal. The reduced overhang inherent to the short execution reduces deflection and vibration, so every hole stays true to the intended position. For work requiring reproducible accuracy, the combination of HSS material and compact geometry ensures consistent cutting performance and longer tool life under standard metalworking conditions. Material choice and standardised design boost reliability Manufactured from HSS (High Speed Steel) and produced to DIN 338 specifications, the bit offers a reliable balance of hardness and toughness. The HSS material is well suited to alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, providing versatility for workshop tasks. Compliance with DIN 338 guarantees that dimensions and tolerances meet industry expectations for short twist drills with cylinder shank. Tip geometry optimised for centring and feed control With a 118° tip angle and the typical geometry of Type N, this drill promotes easier centring on curved or uneven surfaces while keeping feed forces moderate. The sharper point aids initial penetration and helps maintain position during the start of the cut, which is particularly useful on small diameters such as 0.4 mm. Reduced radial forces mean improved surface quality and less risk of walk-off on smooth metal faces. Short length for stability in confined or ergonomic setups The abbreviated overall length increases stiffness and is ideal when the drill projects only a short distance from the chuck, for example in handheld Drilling Machine operations or compact fixtures. This short format improves operator control and reduces chatter, translating directly into cleaner holes and fewer rejects. The compact design also simplifies handling during manual setups and high-speed machining in production. For whom this drill was developed and practical tips This Type N short twist drill is targeted at tradespeople, toolroom operators and metalworking hobbyists who require small, precise holes in metals. To extend service life, use appropriate cutting fluid, moderate feed rates for the small diameter and ensure secure clamping of the workpiece. If uncertainty exists regarding material compatibility or optimal machining parameters, METAV Werkzeuge provides expert guidance and application support. Strong recommendation: Choose the MetavCUT short HSS Twist Drill for precise, repeatable metal drilling — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40004-FDA Diameter: 0.4 mm Overall length: 22 mm Spiral length: 6 mm Tip angle: 118° Type: Type N Execution: short Colour: black Material: HSS Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N short HSS is primarily used for drilling metal; it is particularly suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many technical plastics. The short HSS design provides improved stability for small-diameter, high-precision holes in metalworking applications. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills. For metal tasks the MetavCUT Type N Twist Drill is the standard choice, while purpose-made bits are recommended for timber or masonry for best results.

Twist Drill — Type N short HSS drill, Ø 0.5 mm, 118° point angle, black, DIN 338 A Twist Drill Type N designed for precise Metal drilling with a short design for increased stability and centred starts. Short design for high stability HSS material suited for metal machining 118° point angle for precise centring Complies with DIN 338 for short drills Suitable for Drilling Machine and hand drills Exceptional precision and endurance for metalworking The Twist Drill in HSS is engineered for reliable performance when machining metal. Its short execution reduces overhang and minimises bending, which delivers a steadier cut and improved hole accuracy. The 118° point angle helps the tip centre quickly on flat or slightly curved surfaces, reducing walking and facilitating a clean entry. For tradespeople and workshops where repeatable, small-diameter holes are required, the compact geometry translates directly into less rework and a smoother workflow. Stable drilling for demanding applications Designed under DIN 338 as a short cylindrical-shank drill, this Type N tool offers high rigidity for medium-hard metalwork. The reduced free length gives better control when using hand-held or bench Drilling Machines, making it well suited to precise tasks such as panel work, instrument fabrication and small-part assembly. Because the bit is manufactured from High-Speed Steel, it balances toughness and wear resistance, so operators benefit from consistent performance across repeated holes without compromising bit life. Material choice and practical advantages explained High-Speed Steel (HSS) stands for cutting durability under elevated speeds and temperatures; it is particularly effective on alloyed and unalloyed steels, cast iron, non-ferrous metals and engineering plastics. The Type N fluting is the classic spiral for metal drilling and is easy to re-sharpen if required. The short geometry also improves chip evacuation in interrupted cuts and reduces the chance of tool chatter. For users who value serviceable tools, HSS presents an economical choice with clear reconditioning options and reliable everyday performance. Who benefits from this design Workshops, maintenance technicians and precision engineers who need fine-diameter holes will appreciate the control and repeatability this drill provides. The compact form factor is ideal where access is limited or where stability from a short protrusion is crucial. If tasks demand frequent small holes in metal components while keeping setup times low, this specialised bit delivers the necessary combination of accuracy and practical handling that speeds up production without sacrificing quality. Simple handling and compatibility tips To achieve the best results, clamp the workpiece securely and use appropriate coolant or cutting oil when drilling steels; this prolongs tool life and improves surface finish. The drill is compatible with standard chucks used on hand drills and bench Drilling Machines; the short shank reduces run-out and helps maintain concentricity. For customers less familiar with drill geometry, the Type N designation indicates a normal spiral profile tailored to metals rather than soft woods. Strongly recommended: choose the MetavCUT Twist Drill Type N for precise metal drilling — METAV Werkzeuge provides expert advice and support if you are unsure whether this tool fits your task; contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — WhatsApp enquiries welcome at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40005-FDA Diameter: 0.5 mm Point angle: 118° Spiral length: 6 mm Overall length: 22 mm Execution: short Type: Type N Material: HSS (High Speed Steel) Colour: black Application: Drill for Metal Standard: DIN 338 Suitable for: Drilling Machine (Hand Drill) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters in metalworking. This short HSS design is straightforward to re-sharpen and withstands significant loads, making it suitable for demanding metal-drilling tasks. Which three drill types exist? When selecting tools, consider the main categories: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill Type N falls into the Metal drills category and is optimised for steel and similar materials.

Twist Drill — Type N Short HSS Drill, Ø 0.6 mm, 118° Tip, Black, DIN 338 The Twist Drill Type N short HSS drill for metalworking, designed for stable, precise holes in steel and non-ferrous materials when used in a Drilling Machine. HSS Material for reliable metal drilling Short design (DIN 338) for high stability 118° Tip for improved centring on curved surfaces Type N Normal spiral for standard metalworking Black finish and 24 mm overall length Precision and material benefits for durable metal drilling Built from HSS (High Speed Steel), this short Twist Drill offers a resilient balance of hardness and toughness that reduces the risk of breakage, especially for small diameters. The HSS composition is particularly suitable for drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, making the tool a reliable choice for workshops and maintenance tasks. The short overall length increases rigidity and reduces vibration, resulting in cleaner holes and longer tool life. Stability and application in metalworking machines The DIN 338 short design paired with a Type N normal spiral makes this drill ideal for use in a Drilling Machine where precision matters. With a nominal Diameter of 0.6 mm, a Spiral Length of 7 mm and an Overall Length of 24 mm, the geometry minimises deflection and improves concentricity when clamped in the chuck. The 118° Tip provides easier centring on less rigid or slightly curved surfaces, while the short flute length gives enhanced control during feed. Who benefits from this specialised short drill Professionals, tool rooms and hobbyists who perform precision metal drilling will value the combination of short design and HSS material. The tool is suited for tasks requiring accurate hole positions and minimal runout, such as prototype work, instrument making and fine mechanical repairs. Its robustness under standard workshop conditions makes it a practical option for repetitive drilling where stability and repeatable results are required. Practical handling, sharpening and maintenance tips Correct use extends tool life: run the drill at appropriate speeds for the material, keep adequate cooling or lubrication, and avoid excessive feed that increases risk of breakage. The Type N normal spiral is straightforward to re-sharpen by experienced users; sharpening restores the cutting edges and maintains the intended 118° point geometry. For guidance on speeds, feeds or regrinding, METAV Werkzeuge offers expert advice to match the working conditions to the tool. Strongly recommended for precise metalwork: the MetavCUT Twist Drill Type N short HSS for stable, accurate drilling — for personalised technical support contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Telephone: +49 2822 7131930, or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40006-FDA Diameter: 0.6 mm Tip Angle: 118° Type: Type N Execution: short Colour: black Material: HSS Spiral Length: 7 mm Overall Length: 24 mm For Use In: Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill Type N short HSS is primarily applied to the machining of high-strength materials and larger hole diameters; its form allows relatively simple regrinding and it withstands greater loads, making it suitable for demanding metalworking tasks. Which three main drill types exist? The common categorisation lists metal drills, wood drills, and stone/concrete drills, which differ in flute geometry, tip design and material to suit each substrate. Why are Twist Drills pointed (reamed to a tip)? Pointing reduces the cross-edge at the tip of a Twist Drill, significantly lowering friction so that smaller feed forces are required; at the same time the sharpened tip improves the drill’s self-centring in the workpiece. Can the Twist Drill be used to drill wood? A metal drill can be used in wood, but the MetavCUT Twist Drill designed for metal will typically provide less guidance and a less clean finish; however, it is easier to regrind and exhibits lower self-feed compared with specialised wood bits. For which drilling depths is the Twist Drill most used? A through-hole in solid material is commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general assumption that HSSE steels are categorically superior to HSS is incorrect; selection should be based on working conditions and whether the higher acquisition cost of HSSE is justified by the application.

Twist Drill Type N — Ø 0.7 mm, 118°, Short, Black, HSS, DIN 338, MetavCUT The Twist Drill Type N is a short High Speed Steel drill designed for precision metalworking in drilling machines and hand drills. Short HSS design for increased stability Conforms to DIN 338 for consistent quality 118° point angle for reliable centring Suitable for drilling machines and hand drills Black finish improves visibility during machining Exceptional stability for precise metal holes Dank der kurzen Ausführung bietet dieser Twist Drill eine deutlich höhere Stabilität beim Arbeiten in Metall. Die reduzierte Auskraglänge minimiert Vibrationen und Verringerung von Abweichungen, sodass saubere, runde Bohrungen erzielt werden. Für Anwender bedeutet das weniger Nacharbeit und höhere Maßhaltigkeit bei jedem Bohrvorgang. Kurze Werkzeuge sind besonders vorteilhaft bei Präzisionsaufgaben und bei eingespannten Werkstücken, bei denen Verbiegen oder Flattern die Qualität beeinträchtigen könnte. HSS-Material: Elastizität und Bruchsicherheit bei Standardaufgaben Der Einsatz von HSS (High Speed Steel) macht den Bohrer elastisch und widerstandsfähig gegenüber Belastungen bei Standardaufgaben in Metall. Diese Legierung reduziert das Risiko von Bruch insbesondere bei kleinen Durchmessern und ist geeignet für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Für die Anwender heißt das: Längere Standzeiten und einfache Nachschleifbarkeit bei gleichbleibender Bohrleistung unter typischen Einsatzbedingungen. Normgerechte Fertigung nach DIN 338 für industrielle Verlässlichkeit Die Fertigung gemäß DIN 338 gewährleistet reproduzierbare Abmessungen und eine definierte Ausführung als kurzer Spiralbohrer mit Zylinderschaft. Diese Norm steht für industrielle Kompatibilität und erleichtert die Auswahl passender Werkzeuge für Produktionsprozesse. Anwender profitieren von vorhersehbaren Toleranzen und einer einfachen Integration in vorhandene Spannsysteme sowie von einer Auswahl an Oberflächenbehandlungen und Durchmessern, die den Anforderungen unterschiedlicher Einsatzfelder gerecht werden. Technische Spitzengeometrie: 118° für bessere Zentrierung Die gewählte Spitzengeometrie von 118° sorgt für ein gutes Eindringverhalten und erleichtert das Anbohren vor allem bei weniger harten Metallen. Ein spitzerer Winkel unterstützt die Zentrierung auf gewölbten Oberflächen, während er gleichzeitig moderate Randzonenbelastungen erzeugt. Für den Anwender bedeutet das ein zuverlässigeres Anlaufen des Bohrers und gleichmäßigere Bohrbilder bei Serien- oder Einzelteilen, ohne dass aufwendige Vorzentrierungen erforderlich sind. MetavCUT’s Twist Drill Type N empfiehlt sich für alle, die präzise Metallbohrungen benötigen — bei Unsicherheiten steht METAV Werkzeuge mit kompetenter Beratung zur Verfügung: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40007-FDA Diameter: 0.7 mm Spiral length: 9 mm Overall length: 28 mm Point angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Finish / Colour: black Application: Drills for metal Suitable for: Drilling Machine and Hand Drill Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N best used for? The Twist Drill Type N from MetavCUT is primarily intended for drilling metal; it excels in producing accurate holes in steel, cast iron and non-ferrous metals when used in drilling machines or handheld drills. Is this MetavCUT Twist Drill suitable for my drilling machine? Compatibility depends on the chuck and required shank dimensions; the MetavCUT Twist Drill Type N is designed for standard chucks and short overhang applications, and METAV Werkzeuge offers expert support if further technical details are needed. For what are Twist Drills used? Twist Drills are mainly applied when machining high-strength materials and for larger drill diameters; their form permits straightforward sharpening and maintains strength under higher loads. Which three drill types exist? The three main drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross-cut at the tip, lowering friction and required feed forces while improving the drill’s centring behaviour in the workpiece. Can you use a Twist Drill to drill wood? A metal Twist Drill can be used in wood, but guidance and surface quality are inferior compared with dedicated wood drills; however, metal drills are easier to resharpen and have less self-feed. At which drilling depths is the Twist Drill most commonly used? A solid through-hole is typically made with a Twist Drill; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm. What is better, HSS or HSSE? The general belief that HSSE is always superior to HSS is incorrect; choosing between HSS and HSSE should be based on actual operating conditions and whether the higher cost of HSSE is justified.

Spiralbohrer (Durchmesser 0,8 mm, Spitzenwinkel 118°, Typ N, Farbe schwarz, Kurz, Norm DIN 338, Material HSS) von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer des Typs N für präzise Metallbohrungen mit Handbohrmaschine. Spiralbohrer 0,8 mm nach DIN 338 HSS-Material für Stahl und NE-Metalle Kurze Ausführung für hohe Stabilität Spitzenwinkel 118° für einfache Zentrierung Geeignet für Handbohrmaschinen Präzise Metallbearbeitung dank HSS und Normgebung Der HSS-Werkstoff wurde entwickelt, um bei hohen Schnittgeschwindigkeiten zuverlässig zu arbeiten und bietet deshalb eine gute Kombination aus Zähigkeit und Verschleißfestigkeit. Der Einsatz der DIN 338-Norm garantiert standardisierte Abmessungen und eine kurze, robuste Bauform, die für stationäre wie mobile Anwendungen im Metallbereich entwickelt wurde. Durch den Bohrdurchmesser von 0,8 mm lassen sich feine Bohrbilder erzeugen, die besonders bei präzisen Montagen und Feinmechanik-Aufgaben relevant sind. Kurze Bauweise erhöht Stabilität und Bohrgenauigkeit Die kurze Ausführung reduziert die Auskraglänge und verringert damit die Neigung zum Verbiegen während des Bohrens. Mit einer Gesamtlänge von 30 mm bleibt der Bohrer besonders verwindungssteif; das Ergebnis ist eine höhere Stabilität und verbesserte Maßhaltigkeit bei Durchgängen in dünnwandigen Werkstücken oder bei punktgenauen Bohrungen. Anwender profitieren von weniger Schwingungen und gleichmäßigerem Spanabtrag. Vielseitiger Einsatz für Handbohrmaschinen und Metall Für den Einsatz in der Handbohrmaschine ist der kurze Spiralbohrer besonders gut geeignet, weil er einfache Handhabung mit hoher Präzision verbindet. Der Spitzenwinkel von 118° erleichtert die Zentrierung auf leicht gewölbten Oberflächen und sorgt für sauberen Anbohrbeginn. Dieser Bohrertyp eignet sich vornehmlich für legierte und unlegierte Stähle, Gusseisen sowie Nicht-Eisenmetalle und Kunststoffe. Pflege, Nachschliff und sichere Anwendung HSS-Bohrer lassen sich bei Verschleiß gut nachschleifen, wodurch die Lebensdauer verlängert werden kann; ein fachgerechter Nachschliff erhält Geometrie und Zentrierverhalten. Beim Einsatz empfiehlt sich eine angepasste Schnittgeschwindigkeit und geeignete Kühlschmierstoffe, um Überhitzung zu vermeiden. Durch die kurze Ausführung ist das Werkzeug einfacher zu führen, was das Risiko von Bruch verringert und die Arbeitssicherheit erhöht. Empfehlung: MetavCUT Spiralbohrer Typ N mit HSS-Material ist die erste Wahl für präzise Metallbohrungen in der Werkstatt und auf der Baustelle – bei Fragen zur Anwendung oder wenn ergänzende technische Daten benötigt werden, steht METAV Werkzeuge kompetent zur Seite: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40008-FDA Typ: Typ N Durchmesser: 0,8 mm Spitzenwinkel: 118° Ausführung: kurz Farbe: schwarz Material: HSS Norm: DIN 338 Gesamtlänge: 30 mm Spirallänge: 10 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man Spiralbohrer? Der Spiralbohrer von MetavCUT (Typ N) wird vor allem bei der Bearbeitung hochfester Werkstoffe und größeren Bohrdurchmessern eingesetzt. Diese Form lässt sich leicht nachschleifen und hält auch stärkeren Belastungen stand. Welche 3 Bohrertypen gibt es? Für den Einsatzbereich werden allgemein drei grundlegende Bohrertypen unterschieden: Metallbohrer, Holzbohrer und Stein-/Betonbohrer. Warum werden Spiralbohrer ausgespitzt? Die Ausspitzung reduziert die Querschneide an der Spitze des Spiralbohrers. Dadurch verringern sich die Reibkräfte deutlich, es sind geringere Vorschubkräfte nötig, und die Spitze wird beim Anbohren besser im Werkstück zentriert. Kann man mit Spiralbohrer Holz Bohren? MetavCUT Metallbohrer lassen sich auch in Holz verwenden. Die Führung ist jedoch schlechter und das Bohrbild nicht so sauber wie bei speziellen Holzbohrern. Vorteilhaft ist das einfache Nachschleifen und der geringere Selbsteinzug. Bei welchen Bohrtiefen ist der Spiralbohrer das meist verwendete Werkzeug? Eine Bohrung ins Volle wird häufig mit einem Spiralbohrer ausgeführt. Bis zu einem Durchmesser von 20 mm und einer Bohrtiefe von etwa 100 mm ist der Spiralbohrer das am meisten verwendete Werkzeug. Was ist besser, HSS oder HSSE? Die pauschale Annahme, HSSE-Stähle seien HSS grundsätzlich überlegen, ist nicht korrekt. Bei der Auswahl sollte abgewogen werden, ob die konkreten Arbeitsbedingungen den höheren Anschaffungspreis von HSSE rechtfertigen.

Twist Drill Type N — 0.9 mm | 118° Tip Angle | HSS | Short | Black | DIN 338 (MetavCUT) The Twist Drill Type N by MetavCUT is a precision metalworking drill bit designed for accurate, low-deflection drilling in metal using hand drills or drilling machines. Twist Drill Type N, 0.9 mm Diameter Short HSS design for greater Stability Conforms to DIN 338 for short spiral drills 118° Tip Angle for reliable centring on curved surfaces Higher precision through short HSS construction The combination of HSS Material and a Short Design reduces vibration and bending during machining, resulting in consistently round holes and extended tool life. For jobs that demand accuracy—such as fitting dowels, producing locating holes or small-bore metalwork—the reduced free length improves Stability and prevents chatter. The 0.9 mm Diameter makes this bit suitable for fine, precise work in both alloyed and unalloyed steels, cast iron and non‑ferrous Metals while remaining easy to regrind if necessary. Reliable standardisation and machine compatibility Manufactured to DIN 338, this twist drill provides uniform geometry and repeatable performance across batches. The standard specifies short spiral drills with cylindrical shanks, which are especially suited to operation on both stationary and portable machines. As a result, workshops benefit from predictable behaviour and simplified tool management. The Type N spiral geometry is the classic choice for general metal drilling and performs stably in conventional Drilling Machines and Hand Drills without the need for specialised holders. Practical advantages for metalworking professionals For professional users, the bit’s construction translates into two clear benefits: easier centring on the workpiece and lower risk of breakage at small diameters. The 118° Tip Angle promotes self-centring on softer faces while the HSS composition ensures elasticity that reduces fracture risk for holes below 6 mm. This makes the tool appropriate for precise tasks in maintenance, prototyping and small-series production where repeatability and handling safety are priorities. Simple explanation of tips and maintenance A smaller Tip Angle like 118° decreases the effective cross‑cut at the point and improves starting behaviour on curved or non-flat surfaces, reducing the tendency to wander. Occasional resharpening restores geometry; HSS material allows low-temperature manufacturing and efficient regrinding compared with some coated or high-alloy alternatives. Keep cutting speeds moderate and use appropriate lubrication for long tool life when drilling harder materials. For precision metalwork choose the MetavCUT Twist Drill Type N — expert technical advice and order support are available from METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40009-FDA Type: Type N Diameter: 0.9 mm Spiral Length: 11 mm Overall Length: 32 mm Execution: short Material: HSS Standard: DIN 338 Tip Angle: 118° Colour: black For Use With: Drilling Machine / Hand Drill Application: Drills for Metal Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters; it is a common choice when working with Metals because its form is easy to regrind and it withstands greater mechanical loads. Which three drill types exist? In general tool classification there are Metal drill bits, Wood drill bits and Masonry/Concrete drill bits; the MetavCUT Twist Drill (Type N) belongs to the Metal drill bit group and is optimised for metalworking tasks. Why are twist drills pointed? The pointing of a Twist Drill reduces the cross‑cut at the tip, which significantly lowers friction and therefore the required feed forces; this geometry also improves centring of the tip in the Workpiece during the first contact. Can the MetavCUT Twist Drill be used in wood? A Metal drill bit such as the MetavCUT Twist Drill can be used in Wood, but guidance is reduced and the hole finish will usually be less clean; these bits are easier to resharpen and tend to have less self‑feeding action compared with dedicated wood drill bits. For which drilling depths is the Twist Drill most commonly used? A through‑hole or a hole in the solid up to typical diameters of 20 mm and depths up to around 100 mm is commonly executed with Spiral or Twist Drills; for the MetavCUT short design, the bit is optimised for precise, shallow to moderate depths where stability matters most. What is better, HSS or HSSE? The common view that HSSE steels are always superior to standard HSS is incorrect; when choosing between HSS and HSSE for a MetavCUT Twist Drill, assess whether the specific working conditions justify the higher investment in HSSE.

Twist Drill — Type N, Diameter 1.1 mm, 118° Tip, Short, Black, HSS, DIN 338 (MetavCUT) A Twist Drill Type N short HSS bit for precise metal drilling in Drilling Machines. Short design for high stability Ideal for Metal Drilling with Type N geometry 118° Tip Angle for better centring on surfaces HSS construction for toughness and re‑sharpening Conforms to DIN 338 short twist drill standard Precision and Stability for Tough Metal Tasks The short design of this Twist Drill ensures markedly reduced deflection and higher concentricity during drilling operations, which is essential when working with metallic components that demand tight tolerances. Thanks to the HSS material and the limited overhang, the tool resists bending and provides a more consistent Hole Quality. This stability means fewer rejects and less rework when producing precision Parts or preparing fastener holes in thin or thick Metal sheets. Engineered Tip Geometry for Reliable Starts A 118° Tip Angle combines good penetration with dependable centring on slightly curved or uneven surfaces. The moderated Tip Geometry reduces walking at the start of the cut and allows a controlled entry into materials such as unalloyed or alloyed Steel and Cast Iron. For users unfamiliar with angles: a smaller tip angle aids initial positioning, while a larger angle shortens the initial contact time; the 118° compromise is therefore widely used for versatile Metalworking applications. Machine Compatibility and Practical Application Designed for use in a Drilling Machine, this short Type N bit is well suited to tasks where tool rigidity influences result quality. With a Diameter of 1.1 mm, a Spiral Length of 14 mm and an Overall Length of 36 mm, the bit provides a balanced cutting zone and chip evacuation for small to medium depth holes. The normal-helix geometry supports chip removal in many ferrous and non-ferrous Metals while allowing straightforward re‑sharpening when necessary. Durability, Standards and Who Benefits Most Manufactured from HSS according to DIN 338 for short twist drills, this tool offers a reliable combination of toughness and heat resistance for repeated drilling cycles. The Type N geometry targets Metalworkers, tool rooms and workshops that require a versatile, easy-to-maintain drill for production and repair tasks. For professionals and advanced hobbyists alike, the short format brings improved control and a longer service life under typical workshop conditions. MetavCUT’s Twist Drill Type N is recommended for precision metalworking; for technical guidance or to confirm suitability contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 40011-FDA Diameter: 1.1 mm Tip Angle: 118° Spiral Length: 14 mm Overall Length: 36 mm Material: HSS Type: Type N Execution: Short Colour: Black For Drill Machine: Drilling Machine Application: Drills for Metal Standard: DIN 338 Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials can it handle? The Twist Drill from MetavCUT (Type N) is primarily intended for drilling Metal; its HSS composition and normal-helix geometry make it suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and selected Plastics, providing robust performance in workshop and production environments. Which three drill types are commonly distinguished? Commonly, drills are categorised as Metal Drill, Wood Drill and Masonry/Concrete Drill, and the Twist Drill (MetavCUT, Type N) belongs to the Metal Drill group designed for ferrous and non‑ferrous materials. What is a Twist Drill mainly used for? A Twist Drill is mainly applied when machining high‑strength materials and for larger hole diameters; its shape allows straightforward re‑grinding and it withstands higher loads, making it the go‑to tool for many metalworking tasks. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, significantly lowering friction and feed forces; as a result the Twist Drill centres more reliably and requires less operator input during penetration.

Twist Drill (Type N) — 1.25 mm, HSS, Short, 118° Point, Black, DIN 338 The Twist Drill Type N is a short HSS metal‑drilling bit designed for precise work in drilling machines and hand drills. Short, stable design for precise metal drilling High‑performance HSS for standard metal applications Conforms to DIN 338 for consistent dimensions 118° tip angle for reliable centring on curved surfaces Suitable for use in drilling machines and hand drills Built for accurate metal drilling with consistent geometry The HSS construction gives this short drill bit reliable toughness and good elasticity during cutting, making it well suited to the typical demands of metalworking. With a 1.25 mm diameter and DIN 338 specification, the tool provides repeatable geometry for fine holes, while the Type N spiral design targets conventional metal applications. Users benefit from stable hole quality and predictable performance when machining unalloyed and alloyed steels, cast iron, non‑ferrous metals and plastics. Short length improves rigidity and precision A reduced overall length reduces deflection under load and increases stability in handheld and machine setups. The short execution limits overhang and therefore vibration, which results in straighter, more accurate holes and longer usable life of the cutting edge. For tasks that require tight tolerances or where access is limited, this compact geometry is a practical advantage because it keeps the drill centred and reduces the risk of breakage during plunge operations. Tip geometry and the right spiral for common workshop tasks The 118° point angle eases centring and starts cleanly on slightly curved or uneven surfaces. The classic Type N spiral is a general‑purpose metal flute geometry that balances chip evacuation and cutting action for standard alloys and steels. For customers unfamiliar with these terms: the point angle affects how the bit enters material, while the spiral type describes flute shape and chip removal behaviour — both influence feed forces and hole finish. Who benefits and typical workshop uses This bit is ideal for technicians, toolroom staff and hobbyists who require a reliable solution for drilling metal with drilling machines or hand drills. The MetavCUT branded bit is targeted at users needing repeatable hole quality in production or repair settings. Its short form favors precision over reach, making it suitable for jig work, panel fabrication and maintenance tasks where stable guidance and ease of resharpening are priorities. For precise metalworking choose the MetavCUT Twist Drill Type N with HSS construction — for specialist advice or to ensure compatibility with your machines contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400125-FDA Diameter: 1.25 mm Point angle: 118° Type: Type N Material: HSS Execution: short Standard: DIN 338 Total length: 38 mm Colour: black Suitable for: Drilling Machine Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications suit the MetavCUT Twist Drill Type N best? The MetavCUT Twist Drill Type N is primarily intended for drilling metal components; it is especially useful for machining steel, cast iron and non‑ferrous alloys in both workshop and maintenance environments where short, stable drill geometry is required. How should the MetavCUT Twist Drill Type N be used in a drilling machine? When using the MetavCUT Twist Drill Type N in a drilling machine, secure the workpiece, use appropriate cutting fluid for metal, and apply steady feed to avoid chattering; the short HSS geometry tolerates moderate feeds and benefits from good clamping and stable fixturing. What is a Twist Drill used for? A Twist Drill is mainly used for machining high‑strength materials and larger drill diameters. This form is easy to regrind and withstands higher loads, making it suitable for demanding metal‑working tasks. Which three drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills.

Spiralbohrer – Typ N, HSS, 1,2 mm, 118°, kurz, schwarz, DIN 338 Der Spiralbohrer Typ N von MetavCUT ist ein kurzer HSS-Bohrer mit 1,2 mm Durchmesser, 118° Spitzenwinkel und DIN 338‑Norm, ideal für präzise Metallbohrungen mit Handbohrmaschine. Kurze Ausführung für hohe Stabilität und Präzision HSS-Material für Metallbearbeitung und Elastizität DIN 338 konform für kurze Spiralbohrer 118° Spitzenwinkel sorgt für zentriertes Anbohren Kompatibel mit Handbohrmaschinen Präzise Metallbearbeitung dank HSS und Normkonformität Der kurze HSS-Bohrer bietet hohe Elastizität und ist besonders geeignet für die Bearbeitung von legiertem und unlegiertem Stahl sowie Gusseisen und Nichteisenmetallen. Die Einhaltung der DIN 338 gewährleistet standardisierte Abmessungen und eine zuverlässige Passform im Bohrfutter. Für Anwender bedeutet das verlässliche Wiederholgenauigkeit und geringere Ausschussraten bei Serien- oder Reparaturarbeiten. Kurz-Ausführung für bessere Führung und weniger Schwingungen Die reduzierte Auskraglänge erhöht die Stabilität des Werkzeugs und minimiert Vibrationsneigung beim Bohren. Dadurch lassen sich auch Bohrungen mit kleinem Durchmesser kontrollierter ausführen, was die Wahrscheinlichkeit von Abdrift und Werkzeugbruch senkt. Anwender profitieren von sauberen Bohrbildern und einer längeren Standzeit des Werkzeugs. Typ N‑Geometrie erklärt: Vorteil bei Metall Die Typ N Normalspirale ist die klassische Geometrie für Metallbohrer und wurde für universelle Metallanwendungen optimiert. Diese Form unterstützt gleichmäßigen Spanabtrag und ist für den Einsatz an stationären sowie mobilen Bohrmaschinen vorgesehen. Für Anwender ohne tiefes Fachwissen: Die Typ N‑Geometrie bedeutet einfache Handhabung und guten Allroundeinsatz beim Bohren in Metallen. Spitzenwinkel 118° und praktische Pflegehinweise Der Spitzenwinkel 118° sorgt für einfaches Anbohren und gute Zentrierung, besonders bei weicheren Metallen. Durch gezieltes Ausspitzen lassen sich Reibkräfte reduzieren und der Vorschub verringern, was das Bohrergebnis verbessert. HSS‑Bohrer lassen sich bei Bedarf nachschleifen; dabei darauf achten, die ursprüngliche Geometrie und den Spitzenwinkel zu erhalten, um die Leistung nicht zu beeinträchtigen. Die Empfehlung: Setzen Sie auf den robusten HSS Spiralbohrer Typ N von MetavCUT für präzise Metallbohrungen – bei Fragen zur Anwendung oder zur Auswahl des passenden Bohrers berät METAV Werkzeuge kompetent und persönlich per E‑Mail unter info@metav-werkzeuge.com, telefonisch unter +49 2822 7131930 oder per WhatsApp +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40012-FDA Typ: Typ N Material: HSS Durchmesser: 1,2 mm Spirallänge: 16 mm Gesamtlänge: 38 mm Spitzenwinkel: 118° Ausführung: kurz Norm: DIN 338 Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man den Spiralbohrer von MetavCUT, Typ N? Der Spiralbohrer von MetavCUT, Typ N, wird vor allem bei der Bearbeitung hochfester Werkstoffe und bei größeren Bohrdurchmessern eingesetzt; seine Bauform lässt sich leicht nachschleifen und er hält größeren Belastungen stand. Welche drei Bohrertypen gibt es? Bei Bohrern unterscheidet man grundsätzlich Metallbohrer, Holzbohrer und Stein-/Betonbohrer, wobei der Spiralbohrer von MetavCUT speziell als Metallbohrer konzipiert ist. Warum werden Spiralbohrer ausgespitzt? Der Spiralbohrer von MetavCUT wird ausgespitzt, um die Querschneide an der Spitze zu verkleinern; das reduziert Reibkräfte, verringert die erforderlichen Vorschubkräfte und verbessert die Zentrierung im Werkstück. Kann man mit dem Metallbohrer von MetavCUT auch in Holz bohren? Der MetavCUT Spiralbohrer kann in Holz verwendet werden, führt jedoch zu weniger sauberer Führung und Oberflächenqualität als ein spezieller Holzbohrer; dafür ist die Nachschleifbarkeit einfacher und der Selbsteinzug geringer.

Twist Drill — Type N, 1.3 mm, 118° Tip, Short HSS, DIN 338, Black (MetavCUT) The Twist Drill Type N is a short HSS drill bit engineered for precise metal drilling on drilling machines and handheld drills. Short HSS design for high stability 1.3 mm diameter for fine, accurate holes 118° tip for reliable centring in metal DIN 338 standard for short cylindrical shank bits Suitable for drilling machines and handheld drills Precise metal drilling with stable short design The short HSS construction of this Twist Drill delivers reduced deflection and improved concentricity compared with longer bits, which makes it ideal when hole accuracy matters. The Type N geometry is the classic metal spiral suited for steels, cast iron and non-ferrous metals, and the comparatively short overhang ensures a firmer run-out and less vibration. For users seeking reproducible bore quality on both stationary Drilling Machines and Handheld Drills, this configuration reduces chatter and improves tool life. Material choice and tip geometry that improve performance Manufactured from High Speed Steel (HSS) and conforming to DIN 338, the bit combines toughness with wear resistance for standard metalworking tasks. The 118° tip supports easier centring on curved surfaces and soft-to-medium metals, while the rolled or ground short flute improves stability under load. This means less rework and more consistent hole quality for precision assemblies or maintenance work where small diameters like 1.3 mm are required. Practical advantages and recommended applications A short Twist Drill in black finish is particularly suited for drilling in alloyed and unalloyed steels, castings and many plastics where a stable, classic metal-drilling geometry is preferred. The compact overall length and 16 mm Spiral Length help when space is limited or when drilling clamped workpieces. For technicians and hobbyists performing repetitive small-diameter drilling, the reduced risk of breakage and simpler regrinding behavior make this bit a practical choice for workshop and industrial use. Strong recommendation: For accurate metalworking choose the MetavCUT short HSS Twist Drill Type N for reliable centring and long-lasting performance — for expert advice contact METAV Werkzeuge. Are you unsure whether this tool meets your requirements or need additional technical data? No problem — METAV Werkzeuge offers extensive and competent advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 40013-FDA Diameter: 1.3 mm Tip Angle: 118° Material: HSS Execution: short Spiral Length: 16 mm Total Length: 38 mm Colour: black Type: Type N Application: Drills for metal Standard: DIN 338 For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill from MetavCUT Type N drill? The MetavCUT Twist Drill Type N is primarily designed for metalworking: it performs well in alloyed and unalloyed steels, cast iron and many non-ferrous metals, and can also be used in certain plastics where a classic metal-drilling geometry is adequate. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and for larger drill diameters; it is easy to regrind and withstands higher loads, so the MetavCUT Twist Drill Type N is used especially for metalworking tasks that demand durability and consistent hole quality. Which three drill types exist? Drill types are generally categorised as metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category, optimised for machining metals rather than masonry or timber. Why are twist drills pointed? The point reduces the chisel edge at the tip, lowering friction and thus the required feed force; pointing improves centring in the workpiece, so the MetavCUT Twist Drill Type N achieves better guidance and reduced radial forces during drilling.

Twist Drill — Type N · 1.4 mm · 118° Point · HSS · Short · Black · DIN 338 The Twist Drill Type N is a short HSS metalworking drill with a 1.4 mm Diameter and a 118° Point Angle, designed for reliable, precise drilling in metal on Drilling Machines. Short HSS design for higher Stability DIN 338 compliant for assured Quality 118° Point Angle for precise Centering Type N Normal Spiral optimised for Metal Black Finish for improved visibility during work Durable HSS Construction for Consistent Performance Gefertigt aus HSS (High Speed Steel) bietet dieser kurze Twist Drill eine hohe Zähigkeit und Wärmebeständigkeit. Die rollgewalzte Fertigung sorgt für Elastizität und reduziertes Bruchrisiko bei Standardaufgaben, besonders bei Bohrdurchmessern unter 6 mm. Dieser Abschnitt erklärt, warum das Material entscheidend ist: HSS ermöglicht saubere Bohrungen in legiertem und unlegiertem Stahl, Gusseisen sowie in Nichteisenmetallen und Kunststoff, ohne dass die Standzeit unnötig leidet. Short Design erhöht Stabilität und Präzision Dank der kurzen Ausführung nach DIN 338 ist die Auskraglänge reduziert, wodurch Vibrationen und Auslenkung minimiert werden. Dies führt zu einer deutlich besseren Bohrbildqualität und erhöht der Anwender die Präzision bei tiefen, kurzen Bohrungen. Besonders bei stationären oder handgeführten Drilling Machines sorgt die kompakte Bauform für sichere Führung und weniger Ausschuss bei Serienarbeiten. Optimierte Spitze und Spiralgeometrie für bessere Zentrierung Der 118° Spitzenwinkel ermöglicht ein leichtes Eindringen und gute Zentrierung, speziell bei weicheren Metallen. Durch die bewusste Gestaltung der Querschneide und Spirallage reduziert sich die Reibung an der Spitze, sodass die Vorschubkräfte sinken. Für Anwender bedeutet das: präzisere Startbohrungen, geringere Bohrkräfte und eine stabilere Prozessführung bei der Bearbeitung von metallischen Werkstücken. Einsatzbereich und Anwendernutzen Dieser Twist Drill richtet sich an Handwerker, Werkstätten und industrielle Anwender, die präzise Metallbohrungen benötigen. Die Type N Normalspirale ist klassisch für Metallbohrungen konzipiert und weniger geeignet für sehr weiche Werkstoffe. Durch die Kombination aus HSS-Material, kurzer Bauart und DIN-Norm-Konformität bietet der Bohrer eine verlässliche Lösung für wiederkehrende, anspruchsvolle Bohraufgaben. Strongly recommend the MetavCUT short HSS Twist Drill for demanding metal drilling tasks — for technical advice or application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com · ☎️ +49 2822 7131930 · ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40014-FDA Diameter: 1.4 mm Point Angle: 118° Flute Length: 18 mm Overall Length: 40 mm Material: HSS (High Speed Steel) Type: Type N (Normal Spiral) Execution: Short Standard: DIN 338 Colour: Black Application: Drills for Metal Machine Compatibility: Drilling Machine Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill from MetavCUT work with? The MetavCUT Twist Drill Type N, manufactured in HSS, is primarily intended for metalwork: it is suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and certain plastics, delivering stable performance under typical workshop conditions. Is the MetavCUT Twist Drill suitable for use in hand-held drilling machines? Yes, the short design of the MetavCUT Twist Drill improves stability and reduces bending, making it suitable for both stationary machines and hand-held Drilling Machines when used within recommended diameters and feed rates. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters. Its form allows relatively easy regrinding and withstands greater loads, making it suitable for demanding Metal drilling tasks. Which three drill types exist? There are three common drill categories: Metal drills, Wood drills, and Masonry/Stone drills.

Twist Drill — Type N, short HSS, 1.5 mm, 118°, black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal-drilling bit designed for precise work in Drilling Machines and handheld applications. Short design for increased rigidity and precision HSS material for high-speed metal drilling 118° tip for accurate centring on curved surfaces Conforms to DIN 338 for consistent dimensions Suitable for Drilling Machine use Precision and Material for Reliable Metal Working The short HSS construction of this Twist Drill delivers enhanced stability and reduced vibration during metal drilling tasks. With a diameter of 1.5 mm and a compact overall length, the bit resists bending and enables clean hole geometry even under higher cutting loads. The short execution improves concentricity in the chuck, which directly benefits accuracy and tool life compared with longer, less rigid alternatives. Performance on Machines and Practical Benefits Equipped with a 118° tip angle and the classic Type N spiral, this drill bit excels at entering metal smoothly and maintaining a reliable cutting edge. The tip geometry supports improved centring and reduces walking on slightly curved or irregular surfaces, while the material choice (High Speed Steel) permits consistent cutting performance at elevated spindle speeds. For metalworking operations up to moderate diameters, the design translates into predictable chip evacuation and fewer reworks. Who benefits from this bit and where to use it Metal fabricators, maintenance technicians, and demanding hobbyists gain the most from this compact Twist Drill by MetavCUT because the bit's robustness suits frequent use on sheet metal, cast parts and non-ferrous components. Workshops that prioritise repeatable hole quality will find the Type N geometry and DIN 338 conformity especially helpful when producing batches or preparing parts for assembly, as fewer rejects and faster setup checks are common outcomes. Standards, handling and service advantages Manufactured to DIN 338 as a short spiral drill, the bit offers standardised dimensions that ease replacement and tool management. The HSS material is straightforward to sharpen, and the shorter flute length lowers the risk of breakage for diameters below common thresholds. For users unsure about suitability or requiring technical comparisons, MetavCUT and METAV Werkzeuge provide expert guidance to match the drill to the machining context. For robust, precise metal drilling choose the MetavCUT HSS Twist Drill Type N — for expert advice and order assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 40015-FDA Diameter: 1.5 mm Spiral Length: 18 mm Overall Length: 40 mm Tip Angle: 118° Execution: short Material: HSS (High Speed Steel) Type: Type N Colour: black Standard: DIN 338 Suitable for: Drilling Machine Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill Type N from MetavCUT? The MetavCUT Twist Drill Type N is primarily used for drilling in metal; thanks to its HSS construction and standard Type N spiral it performs reliably on ferrous and non-ferrous metals in both Drilling Machines and hand-held applications. Which three main drill types exist and how does the MetavCUT Twist Drill fit in? The three common drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for steel, castings and non-ferrous materials. For what is a Twist Drill used? A MetavCUT Twist Drill is mainly applied in the machining of high-strength materials and for larger hole diameters; its form is comparatively easy to resharpen and it withstands greater loads, making it suitable for demanding metalworking tasks. Why are drill tips sharpened on Twist Drills? Sharpening the tip of a MetavCUT Twist Drill reduces the cross-edge at the point, which lowers friction and therefore requires less feed force; at the same time the sharpened tip centres better in the workpiece for improved hole accuracy. Can a metal Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill Type N can be used in wood, but guidance and finish are typically inferior to specialised wood drills; metal bits are easier to resharpen and exhibit less self-feeding, which can be an advantage in some situations. At which drilling depths is the Twist Drill most commonly used? A solid drilling operation is commonly executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool, providing a reliable cylindrical bore by material removal. What is better, HSS or HSSE for a MetavCUT Twist Drill? The general belief that HSSE is always superior to HSS is not correct; when deciding between HSS and HSSE for a MetavCUT Twist Drill Type N, consider the actual working conditions to determine whether the higher cost of HSSE is justified.

Spiralbohrer (Durchmesser 1,5 mm, Spitzenwinkel 118°, Typ N, 5% Kobaltlegiert, Kurz, DIN 338, HSS‑E) von MetavCUT Der Spiralbohrer von MetavCUT ist ein kurzer HSS‑E Metallbohrer (Typ N) für präzise Bohrungen in legierten und unlegierten Stählen sowie weiteren Metallwerkstoffen. Kurze Ausführung für hohe Stabilität HSS‑E mit 5% Kobalt für längere Standzeit 118° Spitzenwinkel erleichtert Zentrieren Geschliffener Schaft für präzisen Rundlauf DIN 338 Norm gewährleistet Standardqualität Präzision und erhöhte Standzeit bei Metallbohrungen Der kurze HSS‑E‑Bohrer kombiniert 5% Kobalt mit einer kompakten Bauweise, wodurch die Standzeit bei anspruchsvollen Metallbohrungen deutlich steigt. Die reduzierte Auskraglänge verringert Vibrationen und sorgt für höhere Stabilität, was sich in saubereren Bohrbildern und weniger Bruchrisiko niederschlägt. Der Einsatz von HSS‑E macht den Bohrer widerstandsfähiger gegen Wärme und Abrieb, sodass sich das Werkzeug besonders für häufige und kraftvolle Anwendungen in Werkstätten eignet. Effiziente Anwendung in Werkstatt und Produktion Dank der kurzen Konstruktion eignet sich dieses Werkzeug ideal für präzise Bohrarbeiten an legiertem und unlegiertem Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Die Norm DIN 338 klassifiziert die kurze Ausführung mit Zylinderschaft und stellt sicher, dass die Maße und Toleranzen standardisiert sind. Durch die Roll- oder Schleiffertigung (hier geschliffen) entsteht eine Bohrgeometrie, die besonders bei stationären oder mobilen Maschinen eine hohe Zentrierfähigkeit und gleichmäßigen Spanabtrag bietet. Geschliffene Geometrie für exakte Bohrbilder Ein geschliffener Schaft und geschliffene Spannuten bedeuten CNC‑Präzision in der Spanform und Schneidgeometrie. Das Resultat sind sehr scharfe Kanten und eine herausragende Rundlaufgenauigkeit, die sich in sauberen, maßhaltigen Bohrlöchern niederschlägt. Als Nachteil kann erhöhte Sprödigkeit auftreten; daher empfiehlt sich bei intensiven Einsätzen die Nutzung von Kühlung und eine stabile Spannvorrichtung, um maximale Lebensdauer und Bohrergebnisse zu erzielen. Empfohlene Einsatzbedingungen und Hinweise für Anwender Für beste Ergebnisse ist ein abgestimmter Vorschub und eine geeignete Kühlschmierstoffzufuhr empfehlenswert, insbesondere bei höheren Schnittgeschwindigkeiten. Die kurze Bauform reduziert das Bruchrisiko bei Durchmessern unter 6 mm und bietet gleichzeitig bessere Kontrolle beim Bohren bis zu typischen Einsatzbereichen von etwa 20 mm Durchmesser und Bohrtiefen bis zu 100 mm. Werkstätten und professionelle Anwender profitieren von der Kombination aus Präzision und Robustheit. Empfehlung: Für präzise Metallbohrungen den kurzen HSS‑E Spiralbohrer von MetavCUT (Typ N) wählen – bei Unsicherheit oder Bedarf an technischen Details berät METAV Werkzeuge kompetent per E‑Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Bezeichnung: Spiralbohrer 1,5 mm Marke: MetavCUT SKU: 47015-FDA Typ: Typ N Material: HSS‑E Norm: DIN 338 Ausführung: Kurz Farbe: 5% Kobaltlegiert Schaft-Ausführung: Geschliffen Spitzenwinkel: 118° Durchmesser: 1,5 mm Spirallänge: 18 mm Gesamtlänge: 40 mm Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man Spiralbohrer? Der Spiralbohrer von MetavCUT (Typ N) wird vor allem bei der Bearbeitung hochfester Werkstoffe und großen Bohrdurchmessern angewendet. Diese Ausführung ist leicht zu schleifen und hält auch größeren Belastungen stand, weshalb sie besonders für anspruchsvolle Metallarbeiten geeignet ist. Welche 3 Bohrertypen gibt es? Man unterscheidet grundsätzlich Metallbohrer, Holzbohrer und Stein-/Betonbohrer. Der MetavCUT Spiralbohrer (Typ N) ist ein Metallbohrer und wurde speziell für Bohrungen in Metall konzipiert.

Twist Drill — Type N Twist Drill, Ø 1.5 mm, 118° tip, Extra Short, Bright finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill Type N is an extra‑short, ground HSS‑G drill designed for precise metal drilling in hand Drilling Machines and confined spaces. Extra‑short design for high stability HSS‑G ground for up to 40% faster drilling 118° tip for improved centering on curved surfaces Cylindrical shank for universal chuck compatibility Conforms to DIN 1897 for robust workshop use Greater Stability where Space is Limited The Twist Drill from MetavCUT in Extra Short execution is engineered to minimise bending and breakage when working in tight or thin‑walled components. Its reduced Overall Length and shorter Spiral/Working Length increase Stability and torsional rigidity compared with standard drills, which helps to avoid chatter and tool failure during handheld operations. This design makes the bit particularly suitable for Sheet Metal, Profiles and assemblies where access and clearance are restricted, while the DIN 1897 specification underlines consistent dimensions and interchangeability in workshop environments. Faster Cutting with Lower Feed Effort A ground HSS‑G cutting geometry reduces friction and chip adhesion, enabling up to 40% faster advance rates while requiring approximately 50% less Feed Force than conventional HSS drills. Ground fluting improves the cutting edge sharpness and chip evacuation, so the drill penetrates more efficiently and produces cleaner holes. For users, this translates into shorter cycle times and less operator fatigue when working with alloyed and unalloyed steels, cast materials and hard plastics. Tip Geometry Optimised for Metalwork The Type N spiral is the classic metal‑drill geometry, optimised for a wide range of ferrous materials. The 118° tip balances cutting aggressiveness and centring ability: a moderate point angle eases entry on slightly curved surfaces and helps initial alignment, while still providing good lifetime on steels and non‑ferrous metals. For less experienced users: the tip angle determines how the bit bites into the material — a larger angle yields a blunter point with longer cutting edges, whereas a smaller angle improves penetration and centring. Practical Fit and Typical Applications With a Cylindrical (round) shank the bit fits standard three‑jaw chucks on Hand and Angle Drilling Machines, offering universal usability across common workshop equipment. The construction from HSS‑G makes this short drill ideal for maintenance, mechanical workshops and assembly tasks where repeatable, clean holes in steel, cast iron and non‑ferrous metals are needed. Note that the round shank can be prone to slipping under very high torque loads; for heavy‑duty drivers a hex or reduced shank may be preferable. Highly recommend MetavCUT Twist Drill Type N for precise metalworking tasks — for technical advice or to confirm suitability for a specific application contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 56015-FDA Durchmesser: 1.5 mm Spitzenwinkel: 118° Typ: Type N Ausführung: Extra Short Farbe / Finish: Bright finished Material: HSS‑G Schaftausführung: Cylindrical Spirallänge: 9 mm Gesamtlänge: 32 mm Norm: DIN 1897 Anwendung: Drills for Metal Modellserie: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT best suited for? The MetavCUT Twist Drill Type N is primarily intended for metalworking: alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Castings, non‑ferrous metals and hard plastics. Its HSS‑G composition and normal spiral geometry make it efficient for a broad selection of metallic materials in workshop and maintenance settings. Can the MetavCUT Twist Drill be used in hand and angle drills? Yes, the extra‑short HSS‑G design of the MetavCUT Twist Drill is specifically suitable for Hand and Angle Drilling Machines; the reduced overall length improves control in handheld use and in confined spaces while the Cylindrical shank fits standard three‑jaw chucks. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger hole diameters. Their form is relatively easy to re‑grind and resists significant loads, which makes them suitable for demanding metal drilling tasks. Which 3 drill types exist? The three common drill families are: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drill points sharpened? Point sharpening reduces the size of the cross‑cut at the tip, which significantly lowers friction and therefore the required feed forces. At the same time sharpened points improve centring accuracy in the workpiece. Can a metal drill be used for wood? A metal (Type N) drill can be used in wood, but guidance and finish quality are usually inferior compared with purpose‑made wood drills. Metal drills are easier to re‑grind and typically exhibit lower self‑feed characteristics. For which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard tool for through holes in the solid. For diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are categorically superior to standard HSS is incorrect. Evaluate the working conditions carefully to decide whether the higher investment in HSSE is justified for the intended application.

Twist Drill (Type N) – Short, 1.5 mm, 118°, TiN-coated, HSS‑G, DIN 338 by MetavCUT A Twist Drill (Type N) designed for precise metalworking, offering a short, stable design and TiN coating for extended tool life. Short HSS‑G design for improved stability TiN-coated for reduced wear and longer life Fully ground shank for faster, cleaner drilling 118° point angle suited to softer metals and centring Conforms to DIN 338 for reliable manufacturing quality Stable holes with less deflection for precision metalwork The short HSS‑G construction reduces overhang and significantly increases Stability during drilling, which helps to avoid chatter and bending. Because the Flute Geometry is produced by CNC grinding, the cutting edges are exceptionally sharp and ensure clean chip evacuation. This results in a Precision improvement for demanding tasks such as drilling in Steel, Cast Iron or Copper alloys. For stationary machines and bench work, the shorter Projection enables more controllable feed and better repeatability. Faster cutting with lower feed forces thanks to grinding A fully ground Shank and flute geometry enable up to 40% faster drilling speeds while requiring substantially less axial force compared with rolled alternatives. The TiN Coating reduces friction and thermal wear, meaning longer service life under continuous use when combined with appropriate cooling. This advantage translates into higher throughput and lower tool-change frequency, which is particularly valuable in production environments and professional workshops. Versatile application spectrum and material compatibility Engineered as a Type N normal-spiral drill, this short variant is well suited to general metalworking tasks. It performs reliably in alloyed and unalloyed Steel, Tempered Cast, Cast Iron, non‑ferrous Metals like Copper and Bronze, and even hard plastics. The 118° point angle assists centring on slightly curved surfaces and is often preferred when a balance between fast penetration and clean hole finish is required. Practical considerations for safe, efficient use For optimal results, use appropriate cutting fluid or coolant when machining metals to lower temperatures and extend life. The shortened length reduces the risk of breakage under lateral loads, but because ground drills can be relatively brittle, firm clamping and steady feeds are recommended. When high precision is required, the reduced runout of a ground Twist Drill helps deliver consistent diameters and better surface quality. Who benefits from this design Workshop professionals, tool rooms and precision fabricators profit most from the shorter TiN‑coated HSS‑G solution: where repeatable hole quality, tool life and machining speed matter. The product is designed to meet industrial expectations for durability and consistency while remaining easy to integrate into standard Drilling Machines and production routines. Strong recommendation: Choose the MetavCUT short TiN‑coated HSS‑G Twist Drill for precision metal applications — for further technical advice or to confirm suitability for specific tasks, contact METAV Werkzeuge’s competent support team at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill / Short Spiralbohrer Brand: MetavCUT SKU: 46015-FDA Diameter: 1.5 mm Overall length: 40 mm Spiral length: 18 mm Point angle: 118° Type: Type N Execution: Short Coating/Colour: TiN-coated Shank execution: Fully ground Material: HSS-G Norm: DIN 338 Application: Drills for Metal / For Use in Drilling Machine Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill mainly used? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short design and TiN coating make it suitable for precise operations in alloyed and unalloyed Steel, Cast Iron and non‑ferrous metals. This geometry is easy to re‑grind and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for a wide range of metallic materials.

Twist Drill — HSS-G Twist Drill (Diameter 1.5 mm | Point Angle 118° | Long | Bright-Finished | Fully Ground | DIN 340) — MetavCUT The Twist Drill is a long HSS-G drill bit for drilling machines, optimised for deep, precise metal drilling and reliable centring in softer metals. Long design for deep or hard-to-reach holes HSS-G Fully Ground for precise metal drilling 1.5 mm diameter for fine, accurate boreholes 118° point angle for easier centring in softer metals Conforms to DIN 340 for standardised performance Faster, cleaner holes thanks to HSS-G and fully ground geometry The HSS-G material and the Fully Ground flute geometry deliver measurable performance advantages for metalworking. Ground flutes created by CNC grinding produce very sharp cutting edges and high concentricity, which results in cleaner bore surfaces and reduced deviation. According to material data, this design can enable up to 40% faster drilling and requires roughly 50% less feed force compared with conventional rolled HSS drills, so users benefit from higher throughput and less operator fatigue in repetitive tasks. Reach deeper and work in confined spaces with the long version The long execution (DIN 340 style) of this Twist Drill provides extended Spiral Length and Overall Length for deeper bores or when the hole lies recessed. With a Spiral Length of 45 mm and Overall Length of 70 mm, this bit is designed to access internal or hard-to-reach positions where a standard-length bit would be too short. This makes it particularly useful for workshop tasks, maintenance jobs and component assembly where extended reach is required while maintaining drill stability. Better centring and controlled entry thanks to the 118° point A Point Angle of 118° is well suited to softer metals and many non-ferrous materials, offering a compromise between cutting aggression and centring behaviour. The geometry reduces the tendency to wander on curved or uneven surfaces and improves initial positioning without excessive burr formation. For customers unfamiliar with drilling geometry: a larger Point Angle spreads the cutting action, while a smaller angle aids centring on rounded parts — 118° is often chosen for general metalwork and for easier start in aluminium and similar materials. Built for metalworking professionals and versatile applications This Twist Drill from MetavCUT is engineered for drilling machines and is primarily intended for metalworking tasks. It is suitable for alloyed and unalloyed steels, cast and temper steels, grey and spheroidal cast irons, sintered iron, non-ferrous metals and hard plastics. The Bright-Finished surface aids corrosion resistance and handling, while the Fully Ground shank supports precise clamping and minimal runout. Note that ground HSS can be more brittle than rolled types, so the bit performs best under controlled feed and with appropriate cooling on stationary or machine setups. Strong recommendation: For precision deep-metal drilling choose the MetavCUT Twist Drill with HSS-G and DIN 340 long execution — METAV Werkzeuge provides expert advice and support, contact us at 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 53015-FDA Diameter: 1.5 mm Point Angle: 118° Execution: Long (DIN 340 style) Colour / Finish: Bright-finished For Drilling Machine: Drilling Machine Spiral Length: 45 mm Overall Length: 70 mm Shank Execution: Fully Ground Model Series: Standard Line Material: HSS-G Norm: DIN 340 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill be used in a hand drilling machine? The MetavCUT Twist Drill is suitable for use in a drilling machine; however, because the HSS-G Fully Ground geometry can be more brittle than rolled types, it performs best in a stable drilling setup or with controlled feed and appropriate cooling when used in portable applications. Is cooling necessary for the MetavCUT Twist Drill when drilling steel? When using the MetavCUT Twist Drill in steel or other hard materials, applying coolant or cutting fluid is recommended to extend tool life and maintain cutting performance for this HSS-G Twist Drill. What is a Twist Drill used for? A Twist Drill is primarily applied to the machining of high-strength materials and larger drill diameters. The form is easy to regrind and can withstand greater loads. The MetavCUT Twist Drill is therefore used especially for deep holes and demanding metalworking tasks. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. For metalworking tasks the MetavCUT Twist Drill belongs to the metal drill category. Why are Twist Drills pointed? The point sharpening reduces the cross-cut at the tip of the Twist Drill. By pointing the tip, friction forces are significantly reduced so lower feed forces are required and the drill tip centres more accurately in the workpiece. Can you use a metal Twist Drill for wood? A metal Twist Drill such as the MetavCUT Twist Drill can be used in wood, but it offers poorer guidance and a less clean finish compared with dedicated wood drills. Metal drills are easier to regrind and have lower self-feeding tendency.

Twist Drill — Type N short HSS drill, 1.6 mm, 118°, black, DIN 338 The Twist Drill Type N is a short High Speed Steel drill designed for precise metal drilling with a 1.6 mm diameter and a 118° point angle, suitable for Drilling Machines and hand drills. Short HSS Twist Drill 1.6 mm diameter 118° point angle for quick centring DIN 338 short design for higher stability Type N normal spiral for metal machining Black finish for corrosion resistance Greater accuracy thanks to short design and high rigidity A short configuration reduces overhang and bending, delivering improved stability and more accurate hole positions when working with metal. The compact geometry of this Twist Drill minimises chatter and allows consistent feeds even when using portable Drilling Machines. Professionals and hobbyists benefit from a compact bit that keeps drill axis deviation low, producing clean holes with minimal rework. Robust HSS material and application guidance for metal Manufactured from HSS (High Speed Steel), this Type N drill combines wear resistance with toughness; the material choice makes the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The 118° point angle offers reliable centring on common metal surfaces and is a practical compromise between cutting aggressiveness and tip life. For best results use steady feed rates and correct cutting fluid when machining harder materials. Who should use this drill and how it stands out This Twist Drill targets workshops, tool rooms and dedicated DIY users who require precision in metalworking. The Type N normal spiral is optimised for metal cutting, providing efficient chip evacuation and predictable performance. The black surface finish improves resistance to corrosion during storage and handling. Choose this short HSS bit when dimensional accuracy and durability matter more than deep-hole capability. We recommend the MetavCUT Twist Drill for reliable metal machining — for technical advice or to confirm suitability contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40016-FDA Durchmesser: 1.6 mm Spitzenwinkel: 118° Gesamtlänge: 43 mm Spirallänge: 20 mm Ausführung: short Typ: Type N Material: HSS Farbe: black Für Bohrmaschine: Drilling Machine Norm: DIN 338 Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill mainly used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger-diameter metal holes; its shape is easy to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? In general the three main drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for cutting metal. Is the MetavCUT Twist Drill suitable for stainless steel? The MetavCUT Twist Drill in HSS can drill stainless steel with correct coolant and reduced feed; however for prolonged work in highly abrasive or very hard stainless grades consider specialised coatings or higher‑alloy variants. How should the MetavCUT Twist Drill be sharpened and maintained? Sharpen the Twist Drill on a bench grinder or dedicated drill sharpener following the original point geometry; maintaining the 118° point and even lips preserves centring and reduces required feed forces.

Twist Drill — Type N short, Ø 1.6 mm, 118°, 5% cobalt-alloyed, HSS‑E, DIN 338, Fully Ground (MetavCUT) The Twist Drill Type N short is a precision metal‑drilling tool designed for use in a Drilling Machine, offering a compact overall length and high stability for accurate holes in steel and non‑ferrous metals. Precision short design for stable drilling 1.6 mm Diameter for fine metalwork 118° Tip angle for reliable penetration in softer metals 5% Cobalt‑alloyed HSS‑E for heat resistance and wear life Fully ground shank for high runout accuracy Greater Stability for Accurate Metal Holes The short configuration of this Twist Drill reduces the cantilevered length at the chuck, which results in noticeably lower deflection and improved positional accuracy when drilling. The shorter Spiral Length combined with a compact Overall Length provides a clear benefit for demanding jobs where hole tolerance matters. For workshops using a Drilling Machine, this translates into fewer rejects and less rework, because the tool geometry favours straight, concentric holes even in tougher metals. Heat Resistance and Consistent Cutting Performance Made from HSS‑E with a 5% cobalt alloy, the drill resists softening at elevated temperatures, which preserves cutting edge geometry during prolonged use. The 118° Tip Angle supports efficient cutting in softer steels and reduces walking on curved surfaces, while the Type N Normal Spiral geometry remains the recommended choice for general metal drilling. This material and geometry pairing means longer tool life under intermittent loads and improved chip evacuation in typical metalworking applications. High Precision Finish through Fully Ground Geometry The fully ground flute and geometry, compliant with DIN 338, ensure sharp cutting lips and excellent concentricity. Grinding produces cleaner cutting edges than roll‑forming, which leads to superior hole quality and a better surface finish in the workpiece. Because ground drills can be more brittle than rolled equivalents, it is advisable to use appropriate coolant and moderate feed rates for deep or interrupted cuts to avoid premature tool breakage. Suited Users and Typical Applications This short Type N twist drill is aimed at metalworkers, toolrooms and engineering workshops that require reliable small‑diameter drilling in alloyed and unalloyed steels, cast iron, non‑ferrous metals and plastics. The design is particularly helpful when working on a Drilling Machine where rigidity and repeatable positioning are priorities. For users uncertain about compatibility with specific materials or machine setups, METAV Werkzeuge provides expert consultation to match tooling to application and to recommend optimal machining parameters. Strong recommendation: The MetavCUT Twist Drill short Type N is ideal for precision metalworking—contact METAV Werkzeuge for personalised technical advice via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47016-FDA Diameter: 1.6 mm Tip angle: 118° Type: Type N Execution: short Overall length: 43 mm Spiral length: 20 mm Material: HSS‑E (5% cobalt‑alloyed) Shank execution: fully ground Application: Drills for metal / suitable for Drilling Machine Model series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily applied to the machining of high‑strength materials and larger drill diameters; its short design and material composition make it suitable for demanding metal drilling tasks where stability and precision are required. The geometry is easy to re‑grind and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills (like the MetavCUT Type N Twist Drill), Wood Drills, and Stone/Concrete Drills, each optimised in geometry and material for its respective substrate. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the size of the cross‑cutting edge, which significantly lowers friction and therefore reduces the required feed force. Sharpening also improves centring of the drill tip in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to re‑grind and typically exhibit less self‑feeding action in wood.

Twist Drill — Type N short HSS, 1.75 mm diameter, 118° point angle, black, DIN 338 A Twist Drill (Type N) designed for precise metal drilling with a 1.75 mm diameter and a 118° point angle for reliable centring in standard machining applications. Short HSS Type N for precise metal drilling 118° point angle for reliable centring 1.75 mm diameter with 43 mm overall length DIN 338 compliance for standardised quality Black short design for enhanced stability High stability and material benefits for demanding metalwork Constructed from HSS (High Speed Steel), this short Twist Drill offers a robust balance of elasticity and strength that reduces the breakage risk when machining small diameters. The short execution increases stability and minimises deflection during drilling, which results in more consistent hole geometry and longer life under cyclic loads. For customers requiring dependability in series production, the combination of HSS and a short design delivers a reliable solution. Suitable applications and what the geometry achieves The Type N geometry is the classical choice for metalworking: ideal for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. The 118° point angle provides easier penetration and better centring on mildly curved surfaces, which helps reduce wandering at the start of a hole. When paired with appropriate speeds and feeds, this drill suits both stationary drilling machines and hand-operated drilling machines for controlled, repeatable results. Who benefits from this tool and why it was made Engineers, toolroom technicians and maintenance professionals who require precise, stable holes in metal will value the short design and DIN 338 standard compliance. The drill is optimised for situations where rigidity matters more than reach, such as countersunk setups, jig operations or when machining on workpieces with limited overhang. The short flute length simplifies chip evacuation for small diameters, supporting efficiency on the shop floor. Standard conformity and practical guidance for selection Compliant with DIN 338, this short twist drill meets the dimensional and production specifications expected in industrial environments. The designation “short” refers to the reduced overall and spiral length, improving rigidity compared with standard-length drills of the same diameter. For small-diameter holes up to the specified length, this design minimises vibration and produces a cleaner finish, making it suitable for precision tasks in metal fabrication. Strong recommendation: The MetavCUT Twist Drill Type N in HSS is an excellent choice for stable, precise metal drilling — for further technical advice or to confirm suitability for specific applications, contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400175-FDA Diameter: 1.75 mm Point angle: 118° Type: Type N Colour: black Execution: short Material: HSS Spiral length: 20 mm Overall length: 43 mm Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drilling diameters in metalworking; its design is easy to regrind and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category. Why are twist drills pointed? The point sharpening reduces the cross-edge at the drill tip; for the MetavCUT Twist Drill Type N this lowers friction, reduces required feed forces and improves centring in the workpiece. Can a Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill Type N can be used in wood, but it offers less guidance and a less clean finish compared with dedicated wood drills; it is, however, easier to regrind and has a lower self-feeding tendency. For which drilling depths is the Twist Drill most used? A full-diameter through-hole is often performed with a twist drill; for diameters up to around 20 mm and drilling depths up to about 100 mm, the twist drill is the most frequently used tool, applicable to the MetavCUT Twist Drill Type N within its length limits. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to HSS is not correct; choice should be based on actual working conditions and whether those conditions justify the higher price — the MetavCUT Twist Drill Type N in HSS is suited to many standard metalworking tasks.

Twist Drill — Type N Short HSS, 1.7 mm, 118°, Black, DIN 338 The Twist Drill (Type N) is a short HSS metal drill designed for precision drilling with a 1.7 mm diameter and a 118° tip angle, suitable for use in drilling machines and hand drills. Short design for high stability Precision 1.7 mm diameter for fine holes 118° tip angle for fast centring HSS construction for metalworking durability Conforms to DIN 338 for standardised quality High stability and accuracy for metalworking tasks Thanks to its short design and HSS material, this short twist drill provides increased rigidity and reduced bending during operation, which translates directly into more accurate hole positions. The reduced overhang improves tool life in demanding metalworking environments, making it ideal for setups where concentricity matters. Use in hand drills and drilling machines benefits from the stable geometry to achieve repeatable results with minimal runout. Optimised tip geometry for reliable penetration The 118° tip angle is chosen to balance entry behaviour and centring for common metals; it facilitates reliable penetration and reduces walking on curved or non-flat surfaces. For operators unfamiliar with tip angles: a smaller angle eases initial centring, while larger angles shorten the time to break through harder materials. This Type N geometry is a classic choice for metal, offering dependable starting behaviour without excessive cratering. Material selection and standard conformity for consistent performance Manufactured from HSS (High Speed Steel) and complying with DIN 338, this short twist drill offers a combination of toughness and heat resistance appropriate for alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics. DIN 338 classification ensures consistent dimensions and shank form, simplifying tool selection for machining centres and maintenance workshops that require standardised replacement tools. Practical application and who benefits most Designed primarily for precision metal drilling, the tool suits workshop technicians, toolmakers and maintenance personnel who require fine-diameter holes with reliable centring. The short length reduces flex and is particularly advantageous when drilling up to moderate depths in tough materials, where stability and repeatability are key requirements for production or repair tasks. We recommend the MetavCUT Twist Drill (Type N) for any workshop needing a robust, short HSS solution for precise metal drilling — for personalised advice or additional technical details contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Specifications Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40017-FDA Typ: Type N Durchmesser: 1.7 mm Spitzenwinkel: 118° Gesamtlänge: 43 mm Spirallänge: 20 mm Ausführung: short Material: HSS Norm: DIN 338 Farbe: black Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT Type N used for? The Twist Drill from MetavCUT (Type N) is primarily used for drilling high-strength materials and larger diameters in metalworking; its shape makes it easy to resharpen and able to withstand higher loads, which is why it is commonly chosen for demanding applications. Which three drill types exist? The three main drill types are Metal drills, Wood drills and Stone/Concrete drills, and the MetavCUT Twist Drill (Type N) belongs to the category of metal drills optimised for steel and similar materials.

Twist Drill (Type N) — short, Ø 1.7 mm, 118°, 5% Cobalt-Alloyed, HSS‑E, DIN 338 — fully ground shank — MetavCUT The Twist Drill (Type N) is a short HSS‑E metalworking drill designed for Drilling Machines, offering enhanced stability and precision for demanding metal‑drilling tasks. Short design for improved stability 5% Cobalt‑alloyed HSS‑E for increased heat resistance DIN 338 compliant for short twist drills Fully ground shank for high concentricity 118° point angle for easier centring in softer metals Short length for maximum stability and precise holes Thanks to its short design, this Twist Drill minimises overhang from the chuck, which significantly reduces bending and vibration during cutting. As a result, the tool achieves better concentricity and an improved surface finish in drilled holes. This makes the drill especially suitable for workshop situations where repeatable, accurate hole geometry is essential, for example in jigs, fixtures and precision metal components. Alloyed HSS‑E chemistry delivers longer tool life under heat Manufactured from HSS‑E with 5% cobalt alloy, the drill combines toughness with superior red‑hardness compared to standard HSS. This material composition increases resistance to softening at elevated cutting temperatures, allowing for higher cutting speeds and extended tool life when machining steels and other metals. The cobalt content also supports easier regrinding, so maintenance and tool refurbishment remain cost‑effective. Geometry and finish optimised for metalworking performance The 118° point angle provides a compromise between entry sharpness and robustness and aids centring on slightly irregular surfaces; it is particularly helpful when working with softer non‑ferrous metals. The fully ground flute and shank geometry ensure sharp cutting edges and high run‑out accuracy, producing clean holes and reducing burr formation. Conforming to DIN 338, this short twist drill is engineered for consistent quality across batches. Intended applications and target users Engineered for Drilling Machines and manual drill presses, this Twist Drill is tailored to professional workshops, toolrooms and maintenance departments that require reliable metal drilling. Typical applications include machining of alloyed and unalloyed steel, cast iron, non‑ferrous metals and technical plastics. The combination of HSS‑E material and short design supports both stationary machine use and demanding hand‑held operations where rigidity and precision are required. Strong recommendation: For precision metalworking choose the MetavCUT Twist Drill Type N with HSS‑E 5% cobalt alloy — for technical questions or tailored advice METAV Werkzeuge provides expert support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47017-FDA Diameter: 1.7 mm Overall Length: 43 mm Spiral Length: 20 mm Point Angle: 118° Type: Type N Execution: short Material: HSS‑E Alloy/Coating: 5% cobalt‑alloyed Shank Execution: fully ground For: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed steels, cast iron, non‑ferrous metals and various plastics; its HSS‑E chemistry with 5% cobalt improves performance on harder or heat‑sensitive cuts and supports higher cutting speeds while maintaining tool life. What is a Twist Drill mainly used for? A Twist Drill such as the MetavCUT Type N is mainly applied when machining high‑strength materials and larger drill diameters; its design is comparatively easy to regrind and can withstand greater mechanical loads, making it a reliable choice for demanding metalworking operations. Which three drill types are there? Common drill types are: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for machining metallic materials.

Twist Drill — Type N, 1.8 mm, 118°, Short HSS, Black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal-drilling bit designed for precise, stable holes in steel and non‑ferrous metals using drilling machines and hand drills. Short design for high stability and precision HSS material for wear-resistant metal drilling 118° tip for improved centring on curved surfaces DIN 338 compliant for standardised quality Suitable for Drilling Machines and Hand Drills Faster, more reliable results thanks to short HSS construction The Twist Drill features a Short overall profile with a Spiral Length of 22 mm and an Overall Length of 46 mm, which reduces overhang and dramatically improves stability during drilling. Made from HSS (High Speed Steel), the bit combines elasticity with wear resistance; this manufacturing method lowers breakage risk for holes below 6 mm and keeps the cutting edge durable under standard metalworking loads. As a result, operators achieve cleaner holes with less vibration and better tool life. Precise centring and controlled penetration for metalworking A 118° Tip Angle gives this Type N geometry reliable centring on slightly curved or irregular surfaces and reduces the tendency to wander at startup. While larger tip angles are used for very hard materials, the 118° geometry is effective for many steels, cast iron and non‑ferrous metals, balancing entry sharpness and cutting life. The normal spiral flute design evacuates chips efficiently, supporting steady feed rates and consistent hole quality. Optimised for workshop use and maintenance tasks Engineers, maintenance technicians and hobbyists benefit from the Type N design: a classic metal‑drilling profile that excels in routine shop and site tasks. Compatibility with standard Drilling Machines and common chucks ensures easy integration into existing toolsets. The compact length makes the bit particularly useful when access is limited or when rigidity is paramount, for instance when drilling in fixtures, jigs or on portable workpieces. Conformity, resharpening and practical handling Conforming to DIN 338, this short Twist Drill follows standardised dimensions and tolerances, making replacement and inventory straightforward. The short geometry also simplifies resharpening: the flute and point shape are easy to regrind while maintaining the original cutting geometry. For best results, clamp the bit securely, use appropriate cutting fluid for ferrous metals and avoid excessive feed to prevent overheating. Proper storage and occasional light resharpening extend service life and maintain hole accuracy. Highly recommended: Choose MetavCUT’s Twist Drill Type N for precise, stable metal drilling — for personalised technical advice METAV Werkzeuge is pleased to assist you at info@metav-werkzeuge.com, Tel +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40018-FDA Type: Type N Diameter: 1.8 mm Tip angle: 118° Material: HSS Overall length: 46 mm Spiral length: 22 mm Execution: Short Standard: DIN 338 Colour: Black Application: Drills for metal Suitable for: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its shape allows for straightforward resharpening and it endures higher loads, making it suitable for through‑holes and robust workshop applications. Which three drill types are there? Common drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the Twist Drill (MetavCUT, Type N) belongs to the Metal Drill group and is optimised for steel and similar materials.

Twist Drill — Short Type N Twist Drill, 1.8 mm, 118° Tip, 5% Cobalt‑Alloyed, HSS‑E, DIN 338, Fully Ground Shank by MetavCUT The Twist Drill short Type N is a precision metalworking drill bit designed for use in hand Drilling Machines and stationary equipment for reliable, clean holes in a wide range of metals. Short design reduces deflection and improves precision 5% Cobalt‑alloyed HSS‑E for higher heat resistance 118° Tip for clean entry in softer metals Fully ground shank for high runout accuracy Conforms to DIN 338 for standardized dimensions Greater stability and wear resistance for demanding metalwork The short design of this Twist Drill minimises overhang and therefore reduces the risk of bending during operation, resulting in higher precision in every hole. Manufactured from HSS‑E with 5% cobalt, the bit offers improved heat resistance and longer life when drilling alloys and harder steels. As a Type N Normal Spiral it is particularly well suited to metal applications and follows the dimensional and production guidelines of DIN 338 for consistent performance. Built for accurate alignment and clean hole starts A fully ground shank ensures excellent concentricity and low runout in both hand and bench Drilling Machines, improving hole quality and tool life. The 118° tip angle facilitates a clean entry, especially in softer materials such as aluminium, while the short overall geometry (Total Length 46 mm, Spiral Length 22 mm) increases stiffness. This combination yields precise centring and a controlled cutting action that benefits workshop professionals and maintenance technicians alike. Practical advantages, recommended uses and handling This Twist Drill is ideal for professional metalworkers, maintenance crews and precision hobbyists who need reliable results in alloys, Cast Iron, non‑ferrous metals and plastics. The roll‑or‑grind manufacturing choices mean the ground version delivers sharper cutting edges and better roundness, though it benefits from appropriate cooling to reduce the risk of breakage. For drilling below 6 mm diameter, the low‑temperature treatment used in production increases elasticity and reduces fracture risk, making the bit a smart choice for repeated, precise metal drilling tasks. MetavCUT’s short Twist Drill is recommended for precision metal drilling — for expert technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill (Short Type N) Brand: MetavCUT SKU: 47018-FDA Diameter: 1.8 mm Tip Angle: 118° Material: HSS‑E (High Speed Steel, Cobalt alloyed) Alloy/Coating: 5% cobalt‑alloyed Type: Type N (Normal Spiral) Execution: Short Overall Length: 46 mm Spiral Length: 22 mm Shank Finish: Fully ground Application: Drills for metal / suitable for Hand Drilling Machine and stationary machines Standard/Norm: DIN 338 Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill (Type N) is mainly applied to machining high‑strength materials and larger drill diameters; its design is easy to regrind and endures higher loads, which makes it suitable for demanding metalworking tasks. Which three drill types exist? The common drill categories are Metal drill, Wood drill and Stone/Concrete drill, with the MetavCUT Twist Drill belonging to the Metal drill category appropriate for ferrous and non‑ferrous metals.