HSS-G Twist Drill DIN 338 – Type N, Short, Bright (Uncoated), 135°

Twist Drill — Type N Short HSS-G Drill Bit, 1.5 mm, 135°, Bright Finished, DIN 338 (MetavCUT) The Twist Drill is a short Type N drill bit designed for precision metal drilling on Drilling Machines and workshop hand drills. Short Type N design for stable drilling in metal HSS-G ground for up to 40% faster drilling 135° tip angle for harder materials like stainless steel Fully ground shank for precise centring in chucks Conforms to DIN 338 for short twist drills High precision for demanding metalwork The short Twist Drill in HSS-G material combines a compact geometry with a 135° Tip Angle to improve stability when penetrating hard materials. The reduced free length minimises deflection and vibration, which increases hole accuracy in Steel and Cast components. Conformity with DIN 338 ensures the bit matches standard dimensions and tolerances for short twist drills, facilitating reproducible results in production and repair tasks. Faster results with lower feed force Thanks to the specially ground geometry of the HSS-G grade, drilling speeds can be increased while required feed force is reduced, delivering measurable productivity benefits. The fully ground flute and point geometry are optimised to lower friction and chip resistance, which means less operator effort and improved cycle times when processing alloyed and unalloyed Steel, Cast Iron and non-ferrous Metals. Reliable compatibility with machines and chucks The short Execution and a Fully Ground Shank support secure clamping in hand and machine chucks, while the Overall Length of 40 mm and Spiral Length of 18 mm make the bit suitable for tight working spaces. A Bright Finished surface offers corrosion resistance during storage and easier handling. This design favours repeatable centring and consistent surface finish when used in rotating stationary or portable drilling equipment. Expert advice and safe application For precision tasks and challenging materials, correct speeds, feeds and coolant selection matter. METAV Werkzeuge and the manufacturer MetavCUT provide competent technical advice if application-specific data are required. If uncertain whether this tool meets your requirements or whether machine setup is optimal, contact METAV Werkzeuge for detailed guidance by email or phone—support is available for workshop planning and drill selection to maximise tool life and hole quality. Strong recommendation: Choose the MetavCUT HSS-G short Twist Drill for demanding metal drilling and consult METAV Werkzeuge for tailored technical support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Designation: Twist Drill Marke: MetavCUT SKU: 27015-FDA Type: Type N Diameter: 1.5 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Overall length: 40 mm Spiral length: 18 mm Shaft finish: fully ground Colour: bright finished Intended for: Drilling Machine / Hand Drills Model series: Basic Line Applications: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The Twist Drill by MetavCUT in Type N execution is primarily applied to the machining of high-strength materials and larger hole diameters; its shape is easy to regrind and it withstands considerable loads while providing reliable performance in Steel and Cast applications. Which three drill types exist? Commonly distinguished drill types are Metal Drill (for Steel and alloys), Wood Drill and Masonry/Concrete Drill; the MetavCUT Type N Twist Drill falls into the Metal Drill category and is optimised for such tasks. Why are Twist Drills sharpened (pointed)? The sharpening reduces the cross-cut at the tip, which significantly lowers friction and thus the required feed force; a well-pointed Twist Drill (MetavCUT Type N) also centres more reliably in the workpiece for cleaner entries. Can a metal drill be used in wood? A Metal Drill such as the MetavCUT Type N Twist Drill can be used in Wood, but guidance and finish are typically inferior compared with a dedicated Wood Drill; metallic bits are easier to resharpen and show less self-feed in softer materials. At what drilling depths is the Twist Drill most used? A through-hole in solid material is usually executed with a Twist Drill; for diameters up to about 20 mm and drilling depths up to 100 mm, the short or standard Twist Drill is the most frequently used tool. Which is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is not universally correct; the MetavCUT HSS-G selection should be evaluated against actual working conditions to determine whether the additional cost of HSSE is justified.

Twist Drill Type N – 10.2 mm, 135° (HSS‑G, DIN 338, Short, Bright Finished, Fully Ground Shank) by MetavCUT A Twist Drill Type N for precise metal drilling with a 10.2 mm diameter and a 135° point angle, designed for use in hand Drilling Machines and engineered for stability and fast material penetration. HSS‑G for up to 40% faster drilling 10.2 mm Diameter for precision metal holes 135° Point for harder materials like stainless steel Fully ground shank for stable chuck clamping Faster metalworking with reduced thrust for efficient workshop results Manufactured in HSS‑G, this short Twist Drill combines material hardness and a ground geometry that enables significantly higher cutting speeds and up to 50% less feed force compared with conventional HSS drills. The result is faster cycle times when machining alloyed and unalloyed steels, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. This advantage reduces operator fatigue on manual machines and shortens production steps in small series work. Stable drilling and precise hole quality thanks to short design The short overall length and the 87 mm spiral length lower overhang and bending, which increases stability and reduces runout during drilling. For workshop applications requiring repeatable, concentric holes in metal components, the reduced flute length and fully ground shank deliver cleaner drill starts and improved surface finish. This design is particularly suitable for short, accurate holes where rigidity matters more than extreme penetration depth. Geometry optimised for tougher materials and reliable centring A 135° point angle improves performance in harder materials such as stainless steel by shortening the initial cutting action and lowering the tendency to wander on curved surfaces. The Type N normal spiral provides a balanced flute form for efficient chip evacuation in metalworking. In practice, this means fewer re‑drillings and consistent hole geometry even under manual clamping conditions. Shank and finish crafted for secure clamping and longevity The fully ground shank ensures reliable seating in chucks and collets, while the bright finished surface supports smooth chip flow and inspection. The short Twist Drill layout enhances torsional stiffness, which reduces the risk of breakage under heavier loads. For production environments where tool life and repeatability are priorities, this combination of features offers measurable benefits. Strong recommendation: Choose the MetavCUT HSS‑G Twist Drill for demanding metal drilling tasks; for personalised advice or additional technical data METAV Werkzeuge provides expert consultation — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Data Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 27102-FDA Diameter: 10.2 mm Point angle: 135° Type: Type N Material: HSS‑G Overall length: 133 mm Spiral length: 87 mm Execution/Length: Short Shank execution: Fully ground Colour/Surface: Bright finished Intended for: Drilling Machine (Hand Drilling Machine) Standard: DIN 338 Model series: Basic Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the MetavCUT Twist Drill Type N excel? The MetavCUT Twist Drill Type N is mainly used for drilling metal; it is especially suitable for alloyed and unalloyed steels, cast materials and non‑ferrous metals. The HSS‑G ground design provides faster penetration and lower feed forces, making this Twist Drill an efficient choice for demanding metalworking tasks. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal‑drill category and is optimised for machining metal materials.

Der MetavCUT HSS‑G Spiralbohrer in kurzer Ausführung kombiniert schnelleres Bohren, geringere Anpresskraft und erhöhte Stabilität bei harten Werkstoffen und kann direkt über Metav bezogen werden; bei Bedarf steht die Beratung per E‑Mail oder Telefon zur Verfügung. Spiralbohrer von MetavCUT Basic Line (10,5 mm) Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS‑G Bohrer für präzise Metallbearbeitung und eignet sich besonders für legierte und unlegierte Stähle sowie Edelstahl. HSS‑G: bis zu 40 % schnelleres Bohren Kurze Ausführung für höhere Stabilität Spitzenwinkel 135° für harte Werkstoffe Geschliffener Zylinderschaft für exakten Halt DIN 338-konform, Typ N Schnelleres Bohren bei reduziertem Kraftaufwand Der geschliffene HSS‑G Werkstoff sorgt für eine spürbar höhere Schnittleistung: Bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Bohrern ermöglichen effizientere Arbeitsabläufe in Werkstatt und Produktion. Das Ergebnis ist eine verkürzte Bearbeitungszeit und geringere Belastung für Maschine und Bediener. Diese Eigenschaft macht den Bohrer besonders geeignet für das Bohren in legierten und unlegierten Stahl, Gussstahl sowie Nichteisenmetallen. Höhere Stabilität dank kurzer Bauform Die kurze Ausführung reduziert die Auskraglänge und minimiert damit Vibrationen und Verbiegen, was zu präziseren Bohrungen führt. Für Durchmesser im Standard‑Bereich wie 10,5 mm bietet diese Bauform Stabilität bei Handbohrmaschinen und stationären Werkzeugmaschinen. Die geschliffene Schaftausführung sorgt für eine exakte Spannpassung im Bohrfutter und reduziert Rundlaufabweichungen; das verbessert die Bohrbildqualität und verlängert die Standzeit des Werkzeugs. Zielgerichtet für Werkstatt, Montage und Instandsetzung Dieses Werkzeug richtet sich an Anwender in Werkstatt, Montage und Instandhaltung, die häufig in Stahl und gehärteten Materialien arbeiten. Die Kombination aus Typ N Normalspirale und Spitzenwinkel 135° erleichtert das Anbohren von harten Werkstoffen und reduziert Ausriss bei dünnwandigen Teilen. Durch die robuste Konstruktion eignet sich der Bohrer für vielfältige Anwendungen von Reparaturarbeiten bis zu Kleinserien in metallverarbeitenden Betrieben. Normkonformität und Verarbeitung für verlässliche Ergebnisse Die Ausführung entspricht der DIN 338 für kurze Spiralbohrer mit Zylinderschaft und ist als geschliffener Bohrer gefertigt, was gleichbleibende Qualitätsmerkmale gewährleistet. Der Spitzenwinkel 135° ist speziell auf härtere Werkstoffe ausgelegt und unterstützt ein sicheres Zentrieren bei flachen oder gewölbten Oberflächen. Herstellerseitig steht die Basic Line für eine praxisorientierte Balance aus Standzeit, Leistung und Wirtschaftlichkeit. Empfehlung: Den MetavCUT HSS‑G Spiralbohrer in Kurz‑Ausführung für anspruchsvolle Metallbearbeitung wählen und bei Fragen info@metav-werkzeuge.com oder +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 27105-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Hersteller: MetavCUT Zahlen Durchmesser: 10,5 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS‑G (geschliffener Schnellarbeitsstahl) Norm: DIN 338 Typ: Typ N (Normalspirale) Ausführung: kurz Schaft Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Einsatzbereich: legierter und unlegierter Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff FAQ Welche Materialien lassen sich mit dem MetavCUT Spiralbohrer bearbeiten? Der MetavCUT Spiralbohrer Basic Line (Typ N, SKU 27105-FDA) eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; bei besonders zähen Werkstoffen empfiehlt sich gekühltes Bohren. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz mit Handbohrmaschine vorgesehen und profitiert von der kurzen Ausführung, die Stabilität und sicheren Rundlauf gewährleistet. Wozu dient der Spitzenwinkel 135° beim MetavCUT Spiralbohrer? Der Spitzenwinkel 135° erleichtert das Bohren in härteren Werkstoffen wie Edelstahl, verbessert das Zentrieren und reduziert das Substanzabtragen beim Anbohren. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung des MetavCUT Spiralbohrers sorgt für präzise Spannpassung im Bohrfutter, geringeren Rundlauf und damit sauberere Bohrbilder sowie verlängerte Standzeit. Entspricht der Bohrer einer Norm und was bedeutet das? Ja, die Basic Line von MetavCUT erfüllt die DIN 338 für kurze Spiralbohrer mit Zylinderschaft, was eine standardisierte Abmessungs‑ und Qualitätsbasis für industrielle Anwendungen garantiert.

Profitieren Sie von hoher Standzeit durch HSS-G, der kurzen Bauform und dem 135° Spitzenwinkel für harte Werkstoffe; diese Kombination sorgt für schnellere Bohrfortschritte und geringeren Kraftaufwand. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 10 mm – HSS-G Kurzspiralbohrer (DIN 338) von MetavCUT Der Spiralbohrer ist ein kurzer HSS-G Bohrer für präzise Metallbohrungen, geeignet für Handbohrmaschine und stationäre Maschinen. HSS-G Konstruktion für hohe Standzeit 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung für maximale Stabilität Geschliffener Zylinderschaft für genaue Zentrierung Entspricht DIN 338 für kurze Spiralbohrer Leistung und Material für zähe Werkstoffe Der Einsatz von HSS-G bedeutet konkret: höhere Zähigkeit und Temperaturbeständigkeit beim Bohren von legierten und unlegierten Stahlarten. Dadurch reduziert sich die Anpresskraft deutlich, was weniger Ermüdung bei Handarbeiten und geringeren Verschleiß an der Maschine zur Folge hat. Als Vorteil entsteht eine spürbar effizientere Bearbeitung hartes Materials, womit Zeit- und Kostenersparnis in der Werkstatt erzielt werden. Präzision durch kurze Bauform Die kurze Bauform verbessert die Stabilität und minimiert Auslenkungen bei der Bohrung, was besonders bei präzisen Passungen zählt. Als Kurzspiralbohrer nach DIN 338 ist dieses Werkzeug für Anwendungen ausgelegt, bei denen geringe Auskraglängen und hoher Rundlauf wichtig sind. Die geschliffene Schaftausführung sorgt zusätzlich für verlässliche Spannaufnahme und exakte Wiederholgenauigkeit. Geeignete Anwendungen und Werkstoffe Dieses Werkzeug ist optimal für die Bearbeitung von Stahl, Gussstahl, Gusseisen, Temperguss sowie Nichteisenmetallen und Hartkunststoff. Durch die 135° Spitzenwinkel nimmt der Bohrer härtere Werkstoffe kontrollierter an, was Anbohrvorgänge erleichtert und das Ausreißen an der Austrittskante reduziert. In Werkstatt und Montage ermöglicht die Kombination aus Robustheit und Präzision effizientes Arbeiten bei üblichen Metallarbeiten. Handhabung, Empfehlungen und Lebensdauer Für bestmögliche Standzeit empfiehlt sich passende Schnittgeschwindigkeit und bei Bedarf Kühlschmierstoff, besonders bei dicken oder zähen Werkstoffen. Bei Handbetrieb können kurze Auskraglängen und ruhige Spannaufnahme die Lebensdauer deutlich verlängern. Zur Sicherheit kann bei hoher Genauigkeit ein kleines Anpunkten mit Zentrierbohrer die Position stabilisieren und Wanderneigung verringern. Empfehlung: MetavCUT empfiehlt dieses HSS-G Kurzspiralbohrer für anspruchsvolle Metallbearbeitung; technische Rückfragen und Bestellanfragen an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 richten Produktmerkmale Artikelnummer: 27100-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Basic Line Norm: DIN 338 Material: HSS-G Typ: Typ N Ausführung: kurz Schaft Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Daten Durchmesser: 10 mm Gesamtlänge: 133 mm Spirallänge: 87 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten HSS-G: Schnellarbeitsstahl, erhöhte Standzeit, höhere Temperaturbeständigkeit DIN 338: kurze Spiralbohrer mit Zylinderschaft Typ N: Normalspirale, geeignet für Metall geschliffen: voll geschliffener Schaft für präzise Spannaufnahme Basic Line: praxisorientierte Ausführung SKU: 27100-FDA Hersteller: MetavCUT FAQ Für welche Werkstoffe ist dieser Bohrer geeignet? Der Spiralbohrer von MetavCUT eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff; die Materialwahl wird durch die HSS-G Qualität unterstützt. Kann ich den Bohrer in einer Handbohrmaschine verwenden? Ja, die kurz ausgeführte Bauform und der geschliffene Schaft machen den Bohrer geeignet für Handbohrmaschine sowie stationäre Maschinen, wobei stabile Spannaufnahme empfohlen wird. Welchen Vorteil bietet der 135° Spitzenwinkel? Ein 135° Spitzenwinkel ermöglicht bessere Anbohrkontrolle in harten Werkstoffen und reduziert Ausreißen beim Austritt, was bei präzisen Metallbohrungen zu saubereren Ergebnissen führt. Ist Vorbohren für 10 mm Durchmesser notwendig? Bei einem Durchmesser von 10 mm ist direktes Bohren möglich; für höchste Präzision kann ein kurzes Anpunkten mit Zentrierbohrer empfohlen werden, um Wandern zu vermeiden. Was bedeutet HSS-G konkret für den Anwender? HSS-G steht für geschliffenen Schnellarbeitsstahl und bietet dem Anwender höhere Standzeit, geringeren Kraftaufwand beim Bohren und bessere Wärmebeständigkeit gegenüber Standard-HSS-Ausführungen.

Spiralbohrer 11,5 mm – MetavCUT Basic Line (kurz, HSS-G) Der Spiralbohrer von MetavCUT bietet präzise, kurzbauende Metallbohrungen mit reduziertem Kraftaufwand und hoher Stabilität für Werkstatt und Industrieeinsatz. Spiralbohrer MetavCUT Basic Line 11,5 mm Durchmesser für mittelgroße Bohrungen HSS-G geschliffen für kraftsparendes Bohren 135° Spitzenwinkel für härtere Werkstoffe DIN 338 Kurzbauform für hohe Stabilität Kraftsparendes Bohren durch geschliffenes HSS-G Dank HSS-G in geschliffener Ausführung wird der Vorschub spürbar erleichtert, weil die Schneiden präziser geführt werden. Dieser Aufbau sorgt für eine bis zu 40 % schnellere Bohrung bei gleichzeitig rund 50 % niedrigerer Anpresskraft gegenüber herkömmlichen HSS-Varianten. Der Vorteil für Werkstatt und Produktion liegt in reduziertem Bedieneraufwand und höherer Taktzeit, insbesondere beim Bohren von legierten und unlegierten Stahlarten. Präzision und Stabilität bei kurzer Auskraglänge Die kurze Bauform nach DIN 338 verringert die Auslegerlänge und minimiert das Verbiegeverhalten beim Einsatz in Hand- und Säulenbohrmaschinen. Dadurch bleibt die Bohrung maßhaltiger und die Gefahr von Wandern oder Verkantung deutlich geringer. Für Anwender bedeutet das weniger Nacharbeiten, sauberere Passungen und damit eine höhere Fertigungsqualität bei Metallbearbeitung. Anpassung an harte Werkstoffe durch 135° Spitzenwinkel Der Spitzenwinkel 135° optimiert das Anbohren von hartem Material wie Edelstahl und Temperguss, weil die Schneidkante flacher auftrifft und die Anbohrzeit verkürzt wird. Anwender profitieren bei kräftigen Werkstoffen von besserer Zentrierung und längerem Werkzeugleben, wenn geeignete Kühlschmierstoffe eingesetzt werden. Fachbegriffe wie Spitzenwinkel werden hier als Winkel zwischen den Schneiden verstanden, der das Eindringen in das Werkstück beeinflusst. Einsatzgebiet und geeignete Maschinen Dieses Modell ist als kurzer Spiralbohrer insbesondere für den Einsatz an Handbohrmaschinen und stationären Bohrmaschinen geeignet und bietet Vorteile beim Bohren von Baustahl, Gussstahl, Nichteisenmetallen und Hartkunststoff. Die Ausführung mit Zylinderschaft und geschliffener Schaftoberfläche garantiert eine sichere Spannaufnahme und eine zuverlässige Drehmomentübertragung bei normalen Werkstattanwendungen. Für wen dieses Werkzeug entwickelt wurde Der Spiralbohrer richtet sich an Profiwerkstätten, industriellen Instandhalter und ambitionierte Heimwerker, die bei Metallbohrungen Wert auf Stabilität und Effizienz legen. Die Basic Line von MetavCUT kombiniert dabei robuste Materialwahl mit praxisgerechter Normkonformität, sodass Anwender von sofort einsetzbarer Verlässlichkeit und geringer Ausschussrate profitieren. Empfehlung: MetavCUT Basic Line HSS-G Spiralbohrer für kraftsparende und präzise Metallbohrungen – bei Rückfragen zur Anwendung oder Materialwahl gern per eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 27115-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 11,5 mm Gesamtlänge: 142 mm Spirallänge: 95 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 (Norm für kurze Spiralbohrer) Typ: Typ N (Normalspirale für Metall) Ausführung: kurz Schaft Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Was macht den HSS-G Werkstoff bei diesem Spiralbohrer besonders? Der HSS-G Werkstoff des MetavCUT Spiralbohrer Basic Line kombiniert hohe Zähigkeit mit geschliffener Schneidengeometrie, was zu schnellerem Vorschub und geringerem Anpressdruck beim Bohren in Stahl und Guss führt. Ist der Spiralbohrer 11,5 mm für Edelstahl geeignet? Ja, der MetavCUT Spiralbohrer mit 135° Spitzenwinkel und HSS-G ist für härtere Werkstoffe wie Edelstahl geeignet, weil der flachere Winkel das Anbohren erleichtert und die Lebensdauer des Werkzeugs erhöht. Kann dieser Spiralbohrer in Handbohrmaschinen sicher verwendet werden? Die kurze Ausführung nach DIN 338 macht den MetavCUT Spiralbohrer besonders stabil für Handbohrmaschinen; trotzdem sind zentrierendes Anpunkten und passende Drehzahlen empfehlenswert. Welche Vorteile bietet die DIN 338 Kurzbauform in der Praxis? Die DIN 338 Kurzbauform reduziert Auslenkung und Vibration, verbessert die Maßhaltigkeit der Bohrung und senkt den Nacharbeitaufwand in Fertigung und Instandsetzung. Wofür steht die SKU 27115-FDA bei diesem Produkt? Die SKU 27115-FDA identifiziert genau diesen MetavCUT Spiralbohrer der Basic Line mit 11,5 mm Durchmesser und kurzer HSS-G Ausführung, praktisch für Bestell- und Lagerprozesse.

Twist Drill — Short Type N HSS‑G 11 mm, 135° Tip, Bright Finished (Drilling Machine) The Twist Drill Type N short HSS‑G 11 mm is a precision metal‑working drill designed for use with Drilling Machines for accurate, stable holes in hard materials. Short design for greater stability and precision HSS‑G for up to 40% faster drilling and less force 135° tip angle optimised for hard materials Fully ground shank for secure clamping Conforms to DIN 338 for short spiral drills High efficiency and reduced effort with HSS‑G The Twist Drill from MetavCUT uses HSS‑G high‑speed steel, which allows up to 40% faster drilling while requiring around 50% less feed force compared with conventional HSS drills. This advantage translates into less operator fatigue and more throughput in repetitive metalworking tasks. Type N normal spiral geometry provides reliable chip evacuation and makes this short drill especially effective when working with alloyed and unalloyed steel, cast steel, and other demanding materials. Short length for superior stability and accuracy A short overall length reduces the exposed overhang and noticeably lowers the tendency to bend or chatter during machining. The compact format increases rigidity, resulting in cleaner, more precise holes and longer tool life when used in appropriate setups. The Fully Ground shank ensures excellent concentricity in the chuck, improving runout and clamping security for demanding shop environments. Designed for hard materials and precise centring With a 135° tip angle the drill is optimised for harder workpieces such as stainless steel; a flatter tip distributes cutting forces and shortens penetration time while improving centring on uneven surfaces. The Type N spiral is the classic metalworking profile: robust for metal and steel, less suited for very soft materials. For users less familiar with these terms, the tip angle controls how aggressively the drill cuts and how easily it centres, while the spiral form governs chip removal and surface finish. Recommended users and practical handling tips Workshops, maintenance technicians and professional metal‑workers benefit most from this short Type N Twist Drill when demanding precision and tool life are priorities. For best results use appropriate cutting speeds, steady coolant or lubricant on harder alloys, and peck drilling for deeper holes. MetavCUT’s Basic Line construction makes this drill a reliable choice for routine production tasks where stability and repeatability matter. Strong recommendation: The MetavCUT HSS‑G short Twist Drill Type N 11 mm is ideal for professionals needing fast, stable metal drilling — for personalised technical advice contact METAV Werkzeuge; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill, Short, Type N, 11 mm Marke: MetavCUT SKU: 27110-FDA Diameter: 11 mm Material: HSS‑G Tip Angle: 135° Execution: short Model Series: Basic Line Spiral Length: 94 mm Overall Length: 142 mm Shank Execution: fully ground Finish: bright finished For: Drilling Machine Norm: DIN 338 Application: Drills for metal Color: bright finished Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT Type N suitable for? The MetavCUT Twist Drill Type N is primarily intended for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics; its HSS‑G composition and Type N geometry make it a reliable choice for these materials. What is a Twist Drill mainly used for? A Twist Drill such as the MetavCUT Twist Drill Type N is mainly applied when machining high‑strength materials and larger drill diameters; its form is relatively easy to resharpen and it withstands high loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills; for metal applications the MetavCUT Twist Drill Type N is the classic choice. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cut at the drill point, which significantly lowers friction and therefore reduces required feed forces; this sharpening also improves centring of the MetavCUT Twist Drill Type N in the workpiece and helps achieve a cleaner bore.

Der MetavCUT HSS-G Spiralbohrer 12,5 mm überzeugt durch hohe Stabilität und messbare Effizienzsteigerung: Die kurze Ausführung reduziert Schwingungen, während der geschliffene HSS-G Spanabtrag und Standzeit erhöht. Nutzen Sie die Kombination aus Robustheit und schnellerem Vorschub für präzise Metallbohrungen und fragen Sie bei Bedarf unsere Beratung in Emmerich an. Spiralbohrer 12,5 mm »MetavCUT Basic Line« (HSS-G, kurz, DIN 338, SKU 27125-FDA) Der Spiralbohrer 12,5 mm ist ein kurzer, geschliffener HSS-Bohrer nach DIN 338, entwickelt für präzise Bohrungen in legierten und unlegierten Stahl sowie Gusswerkstoffe. MetavCUT Spiralbohrer HSS-G, kurz 135° Spitzenwinkel für härtere Werkstoffe Zylinderschaft, geschliffen für hohe Stabilität DIN 338 Norm, kurze Spiralbohrer-Ausführung Für Handbohrmaschine und Werkstattgebrauch Hohe Stabilität und Präzision bei Stahlarbeiten Die kurze Ausführung gemäß DIN 338 reduziert die Auskraglänge und minimiert Vibrationen, was zu einer höheren Bohrgenauigkeit führt. Durch den geschliffenen Zylinderschaft wird die Rundlaufgenauigkeit verbessert, sodass saubere Passungen und exakte Durchmesser erreicht werden. Dieses Design eignet sich besonders für Anwendungen, bei denen Verformung oder Auswandern des Bohrers vermieden werden muss. Ein stabiler Bohrprozess erhöht die Materialausbeute und spart Nacharbeit. Schnelleres Bohren mit deutlich geringerem Kraftaufwand Der Einsatz von HSS-G führt zu einem bis zu 40 % schnelleren Bohren bei gleichzeitig 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS-Bohrern. Der Spitzenwinkel 135° erleichtert das Anbohren härterer Werkstoffe wie Edelstahl und verringert das Mitlaufen auf gewölbten Flächen. Für Nutzer bedeutet das spürbar weniger Ermüdung bei wiederholten Bohrvorgängen und kürzere Bearbeitungszeiten bei gleichbleibender Bohrqualität. Vielseitiger Einsatz in Werkstatt und Montage Im Standard-Bereich (2,0 mm bis 13,0 mm) ist dieser Bohrer ideal für den Werkstattalltag, Montagearbeiten und DIY-Projekte. Er eignet sich für das Bohren in Baustahl, Aluminium, Gusseisen und Hartkunststoff und kann direkt mit Handbohrmaschine verwendet werden. Durch die kurze Bauart ist der Bohrer besonders gut für beengte Arbeitsräume und stationäre Säulenbohrmaschinen geeignet. Die Ausführung als Typ N (Normalspirale) stellt sicher, dass Metall und Stahl effizient bearbeitet werden. Materialwahl und Pflege für maximale Standzeit Das Material HSS-G (geschliffener Schnellarbeitsstahl) kombiniert Zähigkeit und Verschleißfestigkeit, wodurch Standzeiten bei metallischen Werkstoffen steigen. Eine kontrollierte Kühlung und regelmäßige Kontrolle auf Überhitzung verlängern die Lebensdauer. Der geschliffene Schaft erleichtert zudem die Spannaufnahme und reduziert Fehlerquellen beim Werkzeugwechsel. Für konstant hohe Qualität empfiehlt sich die Verwendung geeigneter Schneidflüssigkeit und moderate Vorschubwerte. Mit dem MetavCUT HSS-G Spiralbohrer 12,5 mm auf langlebige Präzision setzen und direkt beim Präzisions-Partner Metav in Emmerich anfragen: info@metav-werkzeuge.com oder +49 2822 7131930 — für technische Beratung und Verfügbarkeit. Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 27125-FDA Marke: MetavCUT Serie: Basic Line Ausführung: kurz Typ: Typ N Daten Durchmesser: 12,5 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (geschliffener Schnellarbeitsstahl) Schaftausführung: geschliffen Norm: DIN 338 Farbe: blank Für Bohrmaschine: Handbohrmaschine Einsatzgebiet: Bohrer für Metall Typ N: Normalspirale (klassische Metallspirale) FAQ Ist der Spiralbohrer 12,5 mm für Edelstahl geeignet? Ja, der Spiralbohrer 12,5 mm»MetavCUT Basic Line« mit 135° Spitzenwinkel ist speziell für härtere Werkstoffe wie Edelstahl geeignet und ermöglicht sicheres Anbohren bei reduziertem Mitlaufen. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Der Bohrer ist für die Nutzung mit Handbohrmaschine freigegeben; die kurze Ausführung und der geschliffene Schaft verbessern die Stabilität in handgeführten Anwendungen. Welche Vorteile bietet HSS-G gegenüber normalem HSS? HSS-G bietet durch die geschliffene Fertigung einen besseren Spanabtrag und höhere Schnittgeschwindigkeit, was zu bis zu 40 % schnellerem Bohren und längeren Standzeiten führt. Welche Länge ragt aus dem Bohrfutter heraus? Die Gesamtlänge beträgt 151 mm, die Spirallänge liegt bei 101 mm; die kurze Bauform reduziert die Auskraglänge und erhöht die Stabilität beim Bohren. Ist dieser Bohrer für Gusseisen und Nichteisenmetalle geeignet? Ja, der Bohrer wurde für vielseitige Metallanwendungen entwickelt, darunter Gusseisen und Nichteisenmetalle; bei weichen Werkstoffen ist auf geeignete Schnittbedingungen zu achten.

Introducing the Twist Drill — Short Type N, 12 mm, 135° (HSS-G, DIN 338, Bright Finished, Fully Ground Shank) by MetavCUT The Twist Drill Short Type N is a short HSS-G metal drill designed for precise work in Drilling Machines and handheld drills, optimised for harder alloys and stainless materials. High-performance HSS-G for demanding metals Short design for superior stability and precision 135° point angle for stainless and hard steels Fully ground shank for secure clamping Conforms to DIN 338 for standardised short drills Maximise throughput with proven HSS-G performance The Twist Drill is manufactured from HSS-G, a ground high-speed steel that enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills. This efficiency translates into shorter cycle times and reduced operator effort when machining alloyed and unalloyed steels, cast steel, cast iron, sintered iron, tempered cast materials, non-ferrous metals and hard plastics. The combination of material and geometry prioritises consistent chip evacuation and longer cutting life, which benefits workshops and production environments that demand reliability and repeatable throughput. Short length and DIN 338 for precision and rigidity Built to DIN 338 as a short twist drill with a cylindrical shank, this tool reduces overhang and bending compared with standard-length variants. The Short overall form factor and reduced exposed length increase rigidity, improving hole accuracy and reducing the risk of walk or runout when set up in a chuck. This makes the drill particularly suitable for operations where tight tolerances and straightness matter, such as jigs, fixtures and bench drilling. The bright finished surface aids visibility and handling during setup while maintaining the intact cutting geometry. Tool geometry tailored to tough materials With a 135° point angle and the classic Type N normal spiral, the design favours drilling into harder and tougher materials. The larger point angle reduces the risk of tip breakage and lowers cutting forces on stainless steels and other hard alloys, while still providing acceptable centring characteristics on flat surfaces. The Fully ground shank ensures a secure grip in chucks and collets, enabling consistent concentricity and minimising slippage under higher torque loads typically encountered in metalworking. Practical advantages, handling and maintenance The bright finished surface and ground manufacturing reduce burrs and facilitate initial clamping and alignment. For users with limited experience of drill geometry: the point angle controls penetration aggressiveness and centring behaviour — a 135° angle is chosen here to balance wear resistance with manageable feed. Regrinding is straightforward for workshop maintenance, and the robust construction supports repeated sharpening without excessive loss of diameter. For routine workshop use, this tool offers a predictable lifecycle and simplified changeover. I recommend the MetavCUT Twist Drill Type N for demanding metalworking tasks; for technical guidance or to confirm suitability for a specific application, contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Precise Technical Data for Setup Designation: Twist Drill Brand: MetavCUT SKU: 27120-FDA Diameter: 12 mm Spiral Length: 101 mm Overall Length: 151 mm Point Angle: 135° Material: HSS-G Standard: DIN 338 Type: Type N Execution: Short Shank Finish: Fully ground Colour / Surface: Bright finished Application: Drills for metal For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills mainly used for? Twist Drills such as the MetavCUT Twist Drill Type N are primarily applied to the machining of high-strength materials and larger drill diameters; their geometry and material allow drilling in alloyed and unalloyed steels, cast and sintered irons and hard plastics. The shape is relatively easy to sharpen and withstands higher loads. Which three drill types exist? The three common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N falls into the metal drill category and is optimised for metalworking tasks. Can this twist drill be used in a handheld drill or a drilling machine? The MetavCUT Twist Drill Type N is suitable for use in Drilling Machines and can be employed in handheld drills where the setup provides sufficient rigidity; for best concentricity and life, prefer a stable chuck or collet and appropriate feed rates. Are you unsure whether this tool meets your requirements or need additional technical data? METAV Werkzeuge offers comprehensive, competent advice — contact us at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.

Twist Drill Type N 13 mm by MetavCUT — HSS-G, short, Bright Finished, 135° (DIN 338) A Twist Drill Type N designed for precise metal drilling with a 13 mm diameter for demanding workshop and machine use. 13 mm diameter for robust metalwork 135° tip angle for harder materials HSS-G material for higher cutting speed Fully ground shank for precise centring Short design improves stability and accuracy Faster, cleaner holes in hardened materials with lower feed force The HSS-G Construction of this Twist Drill delivers higher cutting performance and endurance when machining alloyed and unalloyed steels as well as cast materials. With a 135° Spitzenwinkel the Tip is optimised for harder Werkstoffe, reducing chatter and improving Hole Finish. The result is faster progress with noticeably lower Anpresskraft, which makes operations on stationary or hand-operated Drilling Machines more efficient. Technical terms explained: HSS-G denotes a ground high-speed steel grade that combines sharpness retention and ease of regrinding, while Type N refers to the normal spiral geometry suited to metalworking rather than soft materials. Short design and fully ground shank for superior centring and stability Built to the DIN 338 specification for short Twist Drills, the compact Gesamtlänge and reduced overhang reduce bending moments and improve concentricity. The fully ground Schaft ensures a precise fit in the Chuck and reliable centring during start-up, which is particularly valuable when drilling close to edges or in fixtures. This design choice minimises runout and increases Tool Life by lowering the risk of breakage under higher loads. For precision tasks where deflection must be kept to a minimum, a short configuration offers measurable advantages. Professional finish and compatibility for metalworking environments Surface bright finished treatment and accurate Spirallänge support consistent chip evacuation when drilling in metals, while the Type N geometry keeps the Twist Drill robust across a range of ferrous and some non-ferrous materials. The Basic Line Modellserie provides a trustworthy option for daily workshop use, combining straightforward Handling with reliable performance. This Twist Drill is intended primarily for metal applications and is particularly suitable for machining tasks that demand repeatable accuracy rather than work in very soft materials. We recommend MetavCUT’s Twist Drill Type N 13 mm for precise, high-demand metal drilling; for personalised technical advice or to confirm suitability for a specific application please contact METAV Werkzeuge – Email: info@metav-werkzeuge.com │ Phone: +49 2822 7131930 │ WhatsApp: +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 27130-FDA Diameter: 13 mm Tip Angle: 135° Type: Type N Material: HSS-G Execution: short Finish: Bright Finished Shank Execution: fully ground Spiral Length: 101 mm Total Length: 151 mm Application: Drill for metal For Drilling Machine: Drilling Machine Model Series: Basic Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The MetavCUT Twist Drill Type N is mainly applied to the machining of high-strength materials and larger hole diameters; its ground HSS design enables up to 40% faster drilling with reduced feed force and holds up well under increased loads in metalworking. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for ferrous materials.

Dateninkonsistenz festgestellt: Der angegebene Durchmesser von 1 mm (Mikro-Bereich) steht im Widerspruch zur Angabe "Für Bohrmaschine: Handbohrmaschine". Mikro-Bohrer gelten in der Regel als nicht für handgeführte Maschinen geeignet, da sie aufgrund ihrer filigranen Bauweise und der hohen Präzision, die für ihre Verwendung erforderlich ist, üblicherweise mit stationären Maschinen oder speziellen Vorrichtungen eingesetzt werden. Die Produktangaben sind daher widersprüchlich und könnten zu Missverständnissen führen. Es ist wichtig, dass die Spezifikationen klar und eindeutig sind, um sicherzustellen, dass das Produkt für den vorgesehenen Verwendungszweck geeignet ist und keine Fehlanwendungen oder Schäden entstehen.

Twist Drill Type N — 2.5 mm, 135° | Short HSS‑G, Bright Finished (DIN 338) The Twist Drill Type N is a short, fully ground HSS‑G drill designed for precision metal drilling in Drilling Machines and Hand Drills. Short design for greater stability 2.5 mm diameter for precise holes HSS‑G: faster drilling, lower thrust 135° tip for hard materials like stainless steel Conforms to DIN 338 for short twist drills High performance: faster drilling with less effort This HSS‑G short Twist Drill delivers measurable efficiency: the ground HSS geometry permits up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS drills. That translates into reduced operator fatigue and improved cycle times in repetitive metalworking tasks. The combination of fully ground shank and short overall length enhances torque transfer, so each drilling operation becomes noticeably more effective. Built for stability and precision in metalworking A short Twist Drill manufactured to DIN 338 offers superior rigidity thanks to a reduced overhang. This stability minimises deflection and supports accurate, repeatable hole placement when working with steels, cast materials and non‑ferrous metals. The reduced cantilever length is particularly advantageous in tight setups or when drilling on portable machines where control and concentricity are critical. Tip geometry and material explained for better results The 135° tip angle is selected for harder materials; a larger point angle reduces initial cutting pressure and improves performance in stainless and tempered steels. Type N denotes the normal spiral suited for metal drilling. If unfamiliar with terms: HSS‑G means high‑speed steel, ground finish — a material and manufacturing style that balances toughness with sharp cutting edges and makes resharpening straightforward when needed. Who benefits and typical applications Workshops, maintenance teams and precision fabricators benefit most from this short Twist Drill. It is optimised for Drilling Machines and Hand Drills when high rigidity and clean hole quality are required. Typical uses include drilling in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered components, non‑ferrous metals and hard plastics where tool life and hole accuracy matter. Strong recommendation: choose the MetavCUT HSS‑G Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for expert advice — Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27025-FDA Diameter: 2.5 mm Point angle: 135° Type: Type N Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 30 mm Overall length: 57 mm Shank finish: fully ground Colour / Finish: bright finished Suitable for: Drilling Machine / Hand Drill Model series: Basic Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The Twist Drill from MetavCUT is primarily applied to the machining of high‑strength materials and larger drill diameters; its design is robust and easy to resharpen, allowing it to withstand greater loads while maintaining performance. Which 3 drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill. These categories reflect typical geometry and tip design optimised for each material group. Can the MetavCUT Twist Drill be used in a handheld drill? Yes, the MetavCUT Twist Drill (Type N) can be used with Hand Drills; however, its short design and HSS‑G material make it best suited to applications where greater stability and controlled feed are possible for clean, accurate holes.

Twist Drill Type N — Short HSS‑G, 2.9 mm, 135° Tip, Bright Finished, Fully Ground Shaft, DIN 338 — MetavCUT A Twist Drill (Type N) short HSS‑G metal drill for drilling machines, designed for precise, stable holes with a 2.9 mm diameter and a 135° tip angle. Short design for high stability and precision HSS‑G: up to 40% faster drilling with less feed force 135° tip for hard materials such as stainless steel Fully ground shaft for secure clamping in drill chucks Precision and Material Advantage that Saves Effort The HSS‑G construction of this short Twist Drill delivers a clear productivity advantage: faster penetration into metal and significantly reduced required feed force, which means less operator fatigue during repetitive work. The bright Finished surface supports smooth chip evacuation while the fully ground shaft ensures stable clamping, reducing runout and improving hole quality. These Eigenschaften make the tool particularly suitable for demanding tasks where consistency matters. Designed for Metalworking and Machine Use Engineered to conform to DIN 338, this short Type N drill is optimised for machining metal on drilling machines and hand drills. The 135° tip angle is chosen specifically to improve centring and reduce walking on tough, hardened materials such as stainless steel and cast steel. Because the cutter length is short, the tool exhibits less deflection and therefore yields cleaner, more accurate bores in high‑strength workpieces. Practical Benefits for Professionals and Workshops Workshops benefit from the combination of 2.9 mm diameter accuracy and the robustness of a short drill: easier fixturing, improved repeatability and faster cycle times on production and repair jobs. The Basic Line modelling and bright finished appearance help with quick identification and inventory management, while the tool’s compatibility with standard drilling machines keeps integration effortless in busy trade environments. What sets this drill apart for precise metal applications The Type N normal spiral geometry is the proven classic for metal drilling. With a reduced overhang and the solid HSS‑G substrate, the drill resists wear longer and can be resharpened more easily than many coated alternatives, giving a good life‑cycle balance for everyday industrial use. The tool’s flute and cutting geometry offer efficient chip removal and stable cutting behaviour even at moderate speeds. Choose MetavCUT’s short HSS‑G Twist Drill for demanding metalwork and contact METAV Werkzeuge for expert advice and application support — Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 27027-FDA Diameter: 2.9 mm Overall Length: 61 mm Flute Length: 33 mm Tip Angle: 135° Type: Type N Material: HSS-G Execution: short Shaft Finish: fully ground Colour / Surface: bright finished Application: Drills for metal Standard: DIN 338 Model Series: Basic Line Suitable For: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters in metalworking; its HSS‑G composition and short design enable reliable drilling in alloyed and unalloyed steels, cast steels, cast iron, sintered iron, non‑ferrous metals and hard plastics while maintaining tool life and performance. Which three drill types are commonly distinguished? In practice, the main categories are metal drills, wood drills and stone/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill group designed for precise, repeatable metal bores.

Twist Drill (Spiralbohrer) — 2 mm • 135° • Type N • Bright Finished • Short • DIN 338 • HSS-G • Fully Ground Shank — MetavCUT The Twist Drill by MetavCUT is a short Type N drilling tool designed for precision metalworking on drilling machines, offering fast penetration and high stability for hardened and alloyed steels. Short Type N design for stable drilling High-performance HSS-G material for demanding metals 135° tip angle for harder workpieces Fully ground shank for precise concentricity Conforms to DIN 338 for short twist drills Faster, more efficient metalworking thanks to HSS-G technology The HSS-G construction reduces drilling time and operator effort by up to 40% compared with conventional HSS tools while requiring less axial force. This advantage is particularly relevant when working with Alloyed Steel, Cast Steel or Hard Plastics, where higher cutting speeds and consistent results matter. The short geometry minimises deflection, so holes stay concentric and rework is reduced. Greater stability and precision for demanding applications A 135° tip angle improves centring and reduces walking on curved or hardened surfaces, which means fewer pilot operations are needed. Combined with the fully ground shank, this Twist Drill delivers tighter runout and better tool grip in the chuck of a drilling machine, enhancing hole quality and extending tool life under elevated cutting forces. Designed for professional metalworkers and workshops Engineered for industrial and trade users, this short Type N twist drill suits tasks where stiffness and repeatable accuracy are required. It is ideal for machinists, maintenance technicians and metal fabrication shops that need reliable performance on stainless steel, non-ferrous metals and cast components without frequent tool changes. DIN 338 compliance explained and practical tip Built to DIN 338 specifications for short twist drills with cylindrical shanks, this product follows standardised lengths and tolerances to ensure interchangeability and predictable behaviour in production setups. For best results, use appropriate cutting fluid and moderate feed for larger diameters; this preserves the sharpened geometry and sustains the advantage of the reduced axial force. Strong recommendation: Choose the MetavCUT Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 27020-FDA Type: Type N Diameter: 2 mm Tip Angle: 135° Material: HSS-G Execution: Short Colour: Bright Finished Shank: Fully Ground Spiral Length: 24 mm Total Length: 49 mm Standard: DIN 338 Application: Drills for metal For Drilling Machine: drilling machine Model Series: Basic Line Packaging Unit: 10 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can I reliably drill with the Twist Drill by MetavCUT (Type N)? The MetavCUT Twist Drill (Type N) made from HSS-G is especially suited for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper-cast materials, non-ferrous metals and hard plastics; it offers improved penetration and wear resistance compared with conventional HSS. Is the MetavCUT Twist Drill suitable for use in a hand-held drill? Although primarily intended for use on a drilling machine, the MetavCUT Twist Drill can be used in hand-held drills for less demanding tasks; however, the short design and fully ground shank deliver optimal accuracy and reduced runout when clamped in a machine chuck. For what is a Twist Drill mainly used? A Twist Drill is primarily applied for machining high-strength materials and larger diameters; this form is easy to resharpen and withstands greater loads, making it the standard choice for metalworking and tough materials. Which three drill types exist? The three main categories are metal drills, wood drills and stone/concrete drills.

Twist Drill — Short Type N, 3.1 mm, 135°, HSS‑G, Bright Finished, DIN 338 The Twist Drill (Short Type N) is a precision metalworking drill bit designed for drilling machines, offering high stability and efficient cutting for alloyed and unalloyed steels in demanding workshop applications. Short Type N HSS‑G twist drill for metal 3.1 mm diameter with 135° tip angle Fully ground shank for precise centring Bright finished surface for corrosion resistance Conforms to DIN 338 for short twist drills Faster drilling with lower feed force for productive workshops The HSS‑G ground construction reduces required feed force significantly, enabling up to 40% faster drilling and roughly 50% less thrust compared with conventional HSS bits. This design converts into shorter cycle times and less operator fatigue in serial or repair work. The combination of a short overall length and a robust geometry increases rigidity, which improves hole quality in hard materials and reduces chatter on portable and stationary Drilling Machines. Greater stability and cleaner holes through short design and 135° tip A short configuration per DIN 338 reduces overhang and bending, delivering higher positional accuracy when working on components with tight tolerances. The 135° tip angle is optimised for harder materials such as stainless steel, because it slows the initial penetration and reduces grabbing, while the Type N normal spiral is the classic metal-cutting flute geometry. For users unfamiliar with these terms: the tip angle controls how the bit enters material, and a larger angle helps when drilling tough alloys by distributing cutting forces over a broader edge. Suited applications and intended users for consistent workshop results This Twist Drill in HSS‑G is intended for professionals in metal fabrication, maintenance and toolrooms who require dependable performance on steel, cast iron, sintered materials, non‑ferrous metals and hard plastics. The fully ground shank ensures accurate clamping and repeatable concentricity in chucks, making it suitable for both hand-held Drilling Machines and bench or CNC setups where short, precise holes up to typical depths are needed. Quality features that save time and simplify handling The bright finished surface offers improved corrosion resistance and eases chip evacuation, while the ground shaft reduces slippage and improves centring during sequential operations. Because these drills are produced to the DIN 338 specification, users benefit from consistent dimensions and compatibility with standard holders and chucks, which simplifies tool inventory and replacement planning. Strong recommendation: For precision metal drilling choose the MetavCUT short HSS‑G Type N Twist Drill for reliable performance and reduced operator effort — METAV Werkzeuge provides expert technical advice and application support if required, contactable via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill / Spiralbohrer Brand: MetavCUT SKU: 27031-FDA Type: Type N Diameter: 3.1 mm Tip angle: 135° Overall length: 65 mm Spiral length: 36 mm Material: HSS‑G Execution: Short Shank finish: Fully ground Surface finish: Bright finished For machine: Drilling Machine / Handbohrmaschine Application: Drills for metal Series: Basic Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it intended to cut? The MetavCUT Twist Drill Type N is primarily used for drilling metal and is especially suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its short, rigid design supports precise holes in demanding workshop and maintenance tasks. Which three drill types are commonly distinguished? The three common drill types are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill falls into the metal drill category and is optimised for machining metallic materials.

Twist Drill Type N (3.2 mm, 135°) — Short, Bright Finished, HSS‑G, DIN 338 — MetavCUT The Twist Drill Type N is a short HSS‑G drill bit designed for Drilling Machines and metalworking applications, optimised for stable, precise holes in hard materials. HSS‑G for faster cutting and lower feed force Short design for higher stability and less deflection 135° tip angle for hard and stainless materials Fully ground shank for precise clamping and concentricity Conforms to DIN 338 classification for short spiral drills Faster metalworking thanks to HSS‑G technology Equipped with HSS‑G, this short Twist Drill delivers noticeably higher cutting performance while requiring less contact pressure. The hardened material and ground geometry allow the bit to cut more efficiently in alloyed and unalloyed steels, cast steel and non‑ferrous metals. As a direct benefit, cycle times on production and maintenance tasks are reduced and operator fatigue is lowered because less feed force is necessary. Greater stability and accuracy with the short design A Short overall length reduces overhang and improves Stability during drilling operations, which lowers the risk of wander and breakage. The 135° tip angle is optimised for harder materials and supports faster penetration with better centring on curved or tough surfaces. This combination helps achieve cleaner holes and consistent diameters, making the tool suitable for precision assemblies and repeatable workshop work. Designed for Drilling Machines and demanding conditions Made according to DIN 338 and classified as Type N, the bit is intended for use on stationary and portable Drilling Machines where robust metal drilling is required. The Bright Finished surface supports smooth chip evacuation and visual inspection, while the geometry is tuned for common metalworking tasks. Where required, the tool can be used in a variety of machine setups, provided appropriate speeds and feeds are observed. Practical features that support workshop efficiency The Fully Ground shank enables reliable clamping and concentricity in standard chucks, reducing runout and improving hole quality. Combined with the short flute length and the Basic Line design, the bit offers a balance of Precision and ease of resharpening for maintenance routines. For fabrication environments that prioritise repeatable results, this configuration minimises rework and extends usable tool life. Strong recommendation: Choose the MetavCUT HSS‑G Twist Drill Type N for reliable, high‑stability metal drilling; METAV Werkzeuge provides expert consultation if you are unsure about suitability or need additional technical data — Email: info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Short Type N Brand: MetavCUT SKU: 27032-FDA Diameter: 3.2 mm Tip Angle: 135° Type: Type N Material: HSS‑G Execution: Short Shank Finish: Fully ground Brightness/Coating: Bright Finished Application: Drill for Metal / Drilling Machine Spiral Length: 36 mm Overall Length: 65 mm Standard: DIN 338 Model Series: Basic Line Colour: Bright finished Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N primarily used for? The MetavCUT Twist Drill Type N is primarily applied to machining high‑strength materials and larger drill diameters in metalworking. Its ground HSS‑G construction enables up to 40% faster drilling with reduced feed forces, making it suitable for alloyed and unalloyed steel, cast materials and hard plastics; the short design also supports greater stability under load. Which three drill types exist? When selecting drill bits, the main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for metalworking rather than wood or stone applications.

Twist Drill — Short HSS‑G Type N for Drilling Machines, Ø 3.3 mm, 135°, DIN 338, Bright Finished The Twist Drill short Type N from MetavCUT is a precision metal‑working drill designed for drilling machines, offering a 3.3 mm diameter and a 135° tip angle for demanding steel and cast‑metal applications. Short HSS‑G Type N for high stability 3.3 mm diameter for precise pilot holes 135° tip angle for hard materials Fully ground shank for accurate centring Conforms to DIN 338 for metalworking Faster metalworking thanks to ground HSS geometry The HSS‑G construction of this Twist Drill provides a measurable performance advantage: the ground geometry enables up to 40% faster drilling while requiring approximately 50% less feed force than conventional HSS drills. For professionals working with legated and unlegated steels, cast steel and non‑ferrous metals, this means shorter cycle times and less operator effort. The result is more efficient machining without compromising hole quality. Increased stability and precision from the short design Because this tool follows DIN 338 as a short twist drill, the reduced overall length improves stiffness and reduces bending under load. Shorter overhang leads to better concentricity and less chatter, which is especially beneficial when producing tight tolerance holes in hard materials. The compact design therefore supports consistent, repeatable results and reduces scrap rates in workshop environments. Reliable centring and tip design for hard materials The 135° tip angle is optimised for harder workpieces such as stainless steel, reducing walking and improving initial contact. The drill’s Type N normal spiral is the classic metal spiral geometry, suited primarily for metalworking rather than soft timber. A fully ground shank ensures excellent clamping fit and centring in the chuck, while the bright finished surface promotes smooth chip evacuation and visual inspection of wear. Built for professional drilling machines and demanding tasks Compatible with standard drilling machines, this short HSS‑G metal drill is intended for users who require dependable performance when machining steel, castings and technical plastics. Workshops, maintenance crews and metal fabricators benefit from the balance of hardness and toughness offered by the HSS‑G material, making it a practical choice for production and repair tasks where precision and tool life matter. Strong recommendation: choose the MetavCUT HSS‑G short Type N Twist Drill for demanding metalwork—METAV Werkzeuge provides expert, personalised advice if you are unsure whether this tool meets your requirements; contact us by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 27033-FDA Type: Type N Material: HSS‑G Diameter: 3.3 mm Tip angle: 135° Overall length: 65 mm Spiral length: 36 mm Execution: short Shaft execution: fully ground Colour / Finish: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Basic Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The MetavCUT Twist Drill short Type N is mainly used for machining high‑strength materials and larger diameters; it performs particularly well in legated and unlegated steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its ground design is easier to sharpen and withstands higher loads. Which three main drill types exist and where does this product fit? There are three principal drill types: Metal Drill, Wood Drill and Stone / Concrete Drill. The MetavCUT Twist Drill is a metal drill (Type N), optimised for metal applications rather than timber or masonry.

Twist Drill — Type N Short HSS‑G, 3.5 mm, 135°, Bright Finished The Twist Drill short Type N is a precision metalworking drill for Drilling Machines and hand drilling tasks, offering a 3.5 mm diameter and a 135° point angle for reliable performance in harder materials. High‑speed Cutting with HSS‑G for faster drilling Short design per DIN 338 for greater rigidity Fully ground shank for precise clamping and runout 135° point angle optimised for stainless and hard steels Bright finished surface for easy chip evacuation Precision and Faster Cutting for Demanding Metals The HSS‑G material delivers significantly improved cutting performance: up to 40% faster drilling and about 50% less feed pressure compared with conventional HSS drills. This reduces operator effort and lowers tool wear when machining alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The Type N normal spiral geometry ensures effective chip removal and consistent hole quality in metallic workpieces, so users achieve reproducible results even in tougher applications. Stable Short Design for Accurate Holes Designed according to DIN 338 as a short Twist Drill, the reduced overhang makes the tool far less prone to deflection and chatter. The shorter working length results in enhanced stability and improved concentricity, particularly when used in chucking Drilling Machines. The fully ground shank guarantees secure clamping and minimal run‑out, translating into straighter holes, longer tool life and fewer reworks. Application Focused for Metalworking Professionals This Twist Drill is intended primarily for metal drilling tasks and performs best in stationary and portable drilling setups. It is especially suitable for workshops, maintenance departments and production lines where consistent hole accuracy in steel and similar materials is required. The geometry and finish mean the drill is also relatively easy to resharpen, allowing economical use across many cycles. Tip Geometry and Practical Advantages The 135° point angle reduces walking on flat or curved surfaces and shortens the time to break through hard materials. A blunter tip like this distributes cutting forces over a larger area, which helps when centring on stainless steel or tempered components. For users unfamiliar with drill point geometry: a larger tip angle generally improves tip life and reduces the tendency to dig in aggressively, making it a pragmatic choice for robust metalworking. Strong recommendation: Choose MetavCUT quality for demanding metal drilling and contact METAV Werkzeuge's expert team for personalised advice — they provide comprehensive technical consultation and after‑sales support. For assistance email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill short, Type N, 3.5 mm, 135° Marke: MetavCUT SKU: 27035-FDA Diameter: 3.5 mm Overall length: 70 mm Spiral length: 39 mm Point angle: 135° Typ: Type N Material: HSS‑G Shank finish: Fully ground Surface finish: Bright finished Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The Twist Drill by MetavCUT is primarily used for machining high‑strength materials and larger hole diameters; it is particularly suited to metalworking where durability and load tolerance are required. The short design and robust geometry make this Twist Drill easy to resharpen and able to withstand greater stresses during operation. Which three drill types exist? There are three main drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for cutting steels and similar materials. Is the MetavCUT Twist Drill suitable for stainless steel? Yes, the MetavCUT Twist Drill with a 135° point angle and HSS‑G composition is well suited for stainless steel and other harder alloys; the geometry reduces walking and improves tip life for cleaner, more consistent holes. Can the Twist Drill be resharpened? The MetavCUT Twist Drill can be resharpened; the HSS‑G material and the normal Type N spiral make it straightforward to regrind, extending service life and offering cost advantages for frequent users. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271

Twist Drill — Short Type N, Ø 3.7 mm, 135° tip, Bright finished, HSS‑G, DIN 338 (MetavCUT) A short Twist Drill (Type N) for Drilling Machines that excels in metalworking and precision tasks. Short HSS‑G Twist Drill for hard metals 135° tip for improved entry in stainless steel Fully ground shank for high stability and precision Conforms to DIN 338 for short twist drills Faster metalworking with lower feed force The HSS‑G construction combines hardness and toughness, enabling up to 40% faster drilling and requiring around 50% less feed force compared with conventional HSS bits. This advantage reduces operator fatigue during extended runs and lowers the mechanical load on handheld Drilling Machines. The short design minimises overhang, improving stability and reducing deflection, which is particularly valuable when working with legated and unlegated Steel or Cast Iron. Stable, precise holes in demanding materials Equipped with a 135° point angle, this short Type N bit is optimised for harder materials such as Stainless Steel, where a flatter point shortens the initial breakthrough and improves concentricity. The fully ground shank and flute geometry ensure reliable chip evacuation and repeatable centring, so fewer re‑drills are necessary and part quality is maintained. Explanation: a larger point angle distributes cutting forces and delays work hardening on the surface. Built to DIN 338 for workshop reliability Manufactured to DIN 338, the geometry and dimensions follow the standard for short Twist Drills with cylindrical shanks, allowing predictable performance across batches. This standardisation simplifies tool selection for workshops and ensures compatibility with common tool holders. The Basic Line model focuses on practical robustness rather than cosmetic frills, delivering straightforward performance for professional metalworking environments. Where this drill bit adds the most value The product is designed for precision tasks on metal: steel, cast materials, sintered iron and certain hard plastics. Its shorter length improves handling in tight fixtures and reduces chatter in portable Drilling Machines. For users seeking a reliable, easy‑to‑regrind solution for medium to heavy duty holemaking, this Twist Drill offers a practical balance between cutting speed and tool life, making it suitable for production and maintenance applications. Strong recommendation: Choose the MetavCUT HSS‑G short Twist Drill for demanding metal drilling operations; for tailored technical advice and help selecting the right configuration contact METAV Werkzeuge — Email: info@metav-werkzeuge.com │ Phone: +49 2822 7131930 │ WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill (Short) Brand: MetavCUT SKU: 27037-FDA Diameter: 3.7 mm Total length: 70 mm Spiral length: 39 mm Tip angle: 135° Type: Type N (Normal spiral) Material: HSS‑G Shank finish: Fully ground Surface: Bright finished Intended for: Drills for metal / Bohrer für Metall Conforms to: DIN 338 Model series: Basic Line Shaft execution: geschliffen Application machine: Drilling Machine / Handbohrmaschine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Twist Drill are primarily applied to machining high‑strength materials and larger hole diameters. Their geometry makes them straightforward to regrind and capable of withstanding significant loads, so they are well suited for drilling in alloyed and unalloyed Steel, Cast Steel, Cast Iron and hard Plastics. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills, and Stone/Concrete drills. These groups reflect typical geometries and point designs optimised for the respective material families. Are you unsure whether this Twist Drill fits specific requirements or need complementary technical data? METAV Werkzeuge offers comprehensive and competent consultation — contact via info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271.

Spiralbohrer – kurzer HSS-Bohrer 3 mm von MetavCUT Der Spiralbohrer ist ein kurzer HSS-G Bohrer aus der Basic Line für präzise Metallbohrungen in Werkstatt und Montage Spiralbohrer 3 mm von MetavCUT HSS-G geschliffen für schnelle Zerspanung 135° Spitzenwinkel für harte Werkstoffe DIN 338 kurz für stabile, präzise Bohrungen Zylinderschaft geeignet für Handbohrmaschinen Stabile Kurzform für präzise Metallbohrungen Die kurze Ausführung reduziert die Auskragung und erhöht die Stabilität beim Bohren, wodurch sich Verkantungen und Durchbiegungen deutlich verringern. Durch die Bauform nach DIN 338 eignet sich der Bohrer besonders für stationäre und handgeführte Anwendungen, bei denen Präzision gefragt ist. Diese Konstruktion macht den Bohrer zur ersten Wahl, wenn enge Toleranzen und saubere Bohrkanten in Stahl und Guss verlangt werden. HSS-G geschliffen: schneller und mit weniger Kraftaufwand Dank der HSS-G-Ausführung werden Bohrungen bis zu 40 % schneller möglich, während die benötigte Anpresskraft um etwa 50 % sinkt. Das Ergebnis ist eine wirtschaftlichere Bearbeitung besonders in legierten und unlegierten Stahlarten sowie in Gusseisen und Temperguss. Die geschliffene Oberfläche der Spiralnuten sorgt zusätzlich für gleichmäßigen Spanabtransport und verlängert die Standzeit bei kontinuierlichem Einsatz. Geeignet für Werkstatt, Montage und handgeführte Maschinen Mit einem Durchmesser von 3 mm fällt der Bohrer in den Standard-Bereich und ist vielseitig einsetzbar: dünne bis mittlere Bleche, Profile und allgemeiner Maschinenbau. Die Zylinderschaft macht den Einsatz in Handbohrmaschinen unkompliziert, während die kurze Länge Vibrationen minimiert und die Handhabung erleichtert. Anwender profitieren von einer ausgewogenen Kombination aus Agilität und Robustheit. Anwendungshinweise für lange Standzeit und sichere Ergebnisse Ein Spitzenwinkel von 135° ist optimal für härtere Werkstoffe wie Edelstahl, weil er das Anbohren erleichtert und die Anfahrrate reduziert. Bei tieferen Bohrungen empfiehlt sich das zyklische Ausstoßen der Späne oder das Verwenden von Kühlschmierstoff, um Verstopfungen zu vermeiden. Für Präzisionsbohrungen sollte vorgezcentriert oder mit einem Zentrierbohrer angestochen werden, um ein Wandern des Bohrers zu verhindern. Bestellen Sie den Spiralbohrer der Basic Line von MetavCUT über eMail (info@metav-werkzeuge.com), Telefon (+49 2822 7131930) oder per WhatsApp (+49 170 2837271) und sichern Sie sich geprüfte Präzision für Ihre Werkbank Produkteigenschaften Artikelnummer: 27030-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Basic Line Norm: DIN 338 Ausführung: kurz Daten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen Typ: Typ N (Normalspirale) Für: Handbohrmaschine Farbe: blank (bright finished) FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer aus der Basic Line mit HSS-G eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe; die geschliffene Ausführung verbessert dabei die Spanabfuhr. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer 3 mm verfügt über einen Zylinderschaft und ist ausdrücklich für den Einsatz in Handbohrmaschinen vorgesehen, wobei die kurze Ausführung für mehr Stabilität sorgt. Welche Vorteile bietet der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert das Abkippen beim Anbohren in harten Werkstoffen wie Edelstahl und verkürzt die Anbohrzeit, was besonders bei der Serienbearbeitung von Vorteil ist. Wie lange hält der Bohrer bei normaler Werkstattnutzung? Die Standzeit hängt von Werkstoff, Schnittbedingungen und Kühlung ab; der geschliffene HSS-G Bohrer von MetavCUT bietet aufgrund verbesserter Spanabfuhr und geringerer Anpresskraft eine deutlich verbesserte Lebensdauer gegenüber ungeschliffenen Ausführungen. In welcher Verpackungseinheit wird der Bohrer geliefert? Geliefert wird der Spiralbohrer in der Verpackungseinheit von 10 Stück, SKU 27030-FDA, ideal für Werkstätten und Montageeinsätze.

Twist Drill (Type N, Ø 4.1 mm, 135° tip, HSS‑G, Bright Finished, Short, DIN 338) by MetavCUT The Twist Drill Type N short version is a precision metal‑drilling tool designed for use with hand and drilling machines, ideal for stainless and alloyed steels. HSS‑G material for hard metals 135° tip for stainless steel and hard materials Short design for increased stability and precision Fully ground shank for secure clamping Conforms to DIN 338 standard Faster penetration and less operator effort for metalworking The HSS‑G composition of this Twist Drill delivers measurable efficiency: tests show up to 40% faster drilling and about 50% less feed force compared with conventional HSS drills. This translates into shorter cycle times and reduced operator fatigue when working with alloyed and unalloyed steels, cast steels and non‑ferrous metals. The combination of material and geometry makes the tool especially suited for demanding production tasks where throughput and consistency matter. Short length increases rigidity and accuracy in tough jobs A short design according to DIN 338 reduces the exposed overhang and therefore the tendency to deflect, which improves hole position and roundness. For precision tasks on tougher materials the reduced flute length keeps the tool stable and minimises chatter. This benefit is particularly important when drilling from fixtures or in confined set‑ups where control and repeatability are required rather than deep penetration. 135° tip and Type N spiral: reliable centring and wear behaviour Equipped with a 135° tip, the drill is optimised for harder workpiece materials such as stainless steel; the flatter point lowers plunge forces and delays wear on the cutting lip. As a Type N (normal spiral) tool, it offers the classic metal‑drilling balance between chip evacuation and cutting action. The tip geometry also supports better centring on curved surfaces and reduces burr formation, producing cleaner entry holes and simplifying downstream deburring. Secure clamping and broad machine compatibility The fully ground shank provides consistent diameter tolerance for secure clamping in chucks, reducing slippage and concentricity errors. Designed as a short twist drill for manual and machine drilling operations, it suits both stationary drilling machines and robust hand drills. This makes it a practical choice for workshops and maintenance technicians who need a reliable, easy‑to‑mount cutter for everyday metalworking tasks. Who benefits and when to choose this tool Maintenance crews, toolroom staff and production operators working with steels, castings or hard plastics will find this short Twist Drill advantageous where accuracy and tool life are priorities. Choose this twist drill when hole precision, reduced feed effort and process reliability are required rather than maximum hole depth. For guided production runs and fixture work the shorter length improves handling and repeatability. Strong recommendation: For demanding metal drilling choose the MetavCUT Twist Drill Type N in HSS‑G for superior performance; for technical advice or to confirm suitability for your workpiece contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27041-FDA Diameter: 4.1 mm Tip angle: 135° Type: Type N Length overall: 75 mm Length of spiral: 43 mm Version: Short Shank finish: Fully ground Surface colour: Bright finished Material: HSS‑G Standard: DIN 338 Application: Drills for metal; suitable for hand and drilling machines Series: Basic Line Notes: HSS‑G provides faster drilling and lower feed force; short design increases stability and precision Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications suit the Twist Drill Type N by MetavCUT? The MetavCUT Twist Drill Type N is primarily intended for metalworking: it drills alloyed and unalloyed steels, cast steels, cast iron, sintered iron, malleable castings, non‑ferrous metals and hard plastics, offering durable cutters for workshop and maintenance applications. Can the MetavCUT Twist Drill be used in portable hand drills? Yes, the MetavCUT Twist Drill short version is compatible with hand and drilling machines; its short design and fully ground shank ensure stable clamping and safe operation in robust portable drills and bench units. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and for larger drill diameters. This form is easy to sharpen and withstands higher loads. Which three drill types exist? There are three main groups: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills sharpened? Sharpening reduces the cross‑edge at the point of the twist drill. By sharpening the point, frictional forces are significantly lowered so that less feed force is required. At the same time the tip centres better in the workpiece. Can a metal drill be used to drill wood? Metal drills can be used in wood, but they generally guide less well and produce a less clean hole. They are, however, easier to re‑grind and show less self‑feeding behaviour. For which drilling depths is the twist drill most used? Solid drilling is commonly performed with a twist drill. For diameters up to 20 mm and drilling depths up to 100 mm the twist drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to HSS is incorrect. When deciding, consider whether the working conditions justify the higher purchase cost of HSSE.

Twist Drill Type N — HSS‑G, 4.2 mm, 135°, short, bright finished, fully ground shaft, DIN 338 The Twist Drill short Type N for Drilling Machines is engineered for precise metalworking, offering high stability and fast penetration in hardened materials. Short HSS‑G drill for high stability 4.2 mm diameter with 135° point angle Fully ground shank for secure clamping Conforms to DIN 338 for metalworking Optimised for drilling machines and hand drills Faster drilling performance with less feed force Designed for efficiency, the short HSS‑G construction delivers up to 40% faster drilling while requiring 50% less thrust compared with conventional HSS drills. The combination of HSS‑G material and a ground flute geometry reduces friction and heat build‑up, so holes are produced more quickly and with lower machine load. This makes the tool particularly effective for repetitive metalworking tasks where cycle time and operator effort matter. Built for stability and accuracy in hard materials The reduced overhang of the short design increases rigidity and minimises deflection during cutting, resulting in straighter holes and improved tolerances. With a 135° point angle the drill resists wandering and is optimised for tougher materials such as stainless steel and hardened alloys. The Type N normal spiral offers a reliable balance between chip evacuation and cutting edge strength for standard metalworking applications. Secure clamping and machine compatibility A fully ground shaft ensures concentricity and a snug fit in chucks, improving run‑out and enabling consistent performance on both bench and portable Drilling Machines. The overall length of 75 mm with a spiral length of 43 mm provides a compact, robust working length that suits confined setups and reduces vibration. These mechanical features support longer tool life and more predictable results in daily workshop use. Simple technical background explained For users less familiar with tooling: HSS‑G stands for ground high‑speed steel, which combines toughness with a sharper cutting geometry after grinding. DIN 338 specifies short twist drills with cylindrical shanks and helps you compare dimensions and tolerances across manufacturers. The 135° point angle indicates a flatter tip suited to harder metals and reduced drilling start time compared with steeper tips. Who benefits most from this drill Workshops, maintenance technicians and metal fabricators value the combination of speed, stability and durability offered by this short HSS‑G Type N drill. It is particularly suited to tasks where precision in steel, castings and non‑ferrous metals is required and where a compact, reliable tool reduces rework and tool changes. We recommend MetavCUT Twist Drill Type N with HSS‑G for demanding metalworking tasks — for further technical advice or to confirm compatibility with your application contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel. +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 27042-FDA Diameter: 4.2 mm Point angle: 135° Type: Type N Execution: short Finish/Colour: bright finished Shaft design: fully ground Spiral length: 43 mm Overall length: 75 mm Material: HSS‑G Standard: DIN 338 Application: Drills for metal Series: Basic Line For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger drill diameters; it is well suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics, offering easy regrinding and reliable performance under heavier loads. Which three drill types exist? The main categories are metal drills (often HSS), wood drills, and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for metalworking applications.

Meet the MetavCUT Twist Drill — Short Type N, 4.5 mm, HSS‑G, 135°, Bright Finished (DIN 338) The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking with a 4.5 mm diameter and a 135° point angle for demanding materials Short Type N design for high stability and precision HSS‑G fully ground for up to 40% faster drilling 135° point angle: optimised for hard and stainless steels Conforms to DIN 338 for short twist drills Fully ground shank for secure clamping in drills High-performance drilling with less operator force The HSS‑G construction of this short Twist Drill delivers a measurable productivity advantage: the ground geometry enables up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS bits. This translates into reduced operator fatigue and shorter cycle times in repetitive metalworking operations. The 4.5 mm diameter combined with the 135° point angle is particularly effective for starting holes cleanly in tougher alloys, while the Type N spiral provides reliable chip evacuation under machine or handheld operation. Short design for maximum stability and precision A short overall length reduces overhang and flex, increasing drilling accuracy in critical applications. Conforming to DIN 338, the short configuration improves concentricity and minimizes runout when clamped in a chuck. The fully ground shank ensures secure clamping and consistent concentricity, making the tool ideal for setups where tight tolerances are required. These mechanical advantages help deliver repeatable hole quality in production and workshop contexts. Material suitability and application guidance This Twist Drill in HSS‑G is engineered for drilling a broad range of metals: alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics. The 135° point angle slows initial penetration slightly but improves centring and reduces wandering on curved or coated surfaces, which is beneficial for stainless steel and other hard materials. The Type N spiral denotes the classic metalworking geometry, optimised for metal and less suitable for very soft woods or highly abrasive masonry. Who benefits and practical handling notes Workshops, maintenance teams and precision machinists gain from the combined stability of the short design and the productivity of the ground HSS material. The Twist Drill is suitable for both drilling machines and hand drills when correct clamping and feed rates are observed. Regrinding is straightforward due to the ground geometry, extending service life when maintained properly. For queries about suitability for a specific application, METAV Werkzeuge provides expert technical consultation and support. Strong recommendation: Choose the MetavCUT HSS‑G short Twist Drill for precise, efficient metal drilling; for tailored technical advice or application support contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27045-FDA Diameter: 4.5 mm Point angle: 135° Type: Type N Material: HSS-G Standard: DIN 338 Execution: short Colour/Finish: bright finished Suitable for: Drilling Machine (Handbohrmaschine / Hand drill) Spiral length: 47 mm Overall length: 80 mm Shank finish: fully ground Model series: Basic Line Axite enrichment: HSS‑G: The ground HSS drill enables up to 40% faster drilling and requires 50% less feed force than conventional HSS drills. It is particularly suitable for drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics. DIN 338: Classifies short twist drills with cylindrical shank made of high‑speed steel. The 135° point angle is suitable for harder materials such as stainless steel. Type N: Normal spiral, classic metal drill geometry Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (short Type N, HSS‑G) is mainly used for machining high‑strength materials and larger drill diameters. Its geometry allows easier regrinding and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The primary drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking applications.

Der Spiralbohrer von MetavCUT überzeugt durch HSS‑G‑Schneidleistung und die kurze, geschliffene Ausführung, die höhere Stabilität und geringere Verformung beim Bohren in Stahl gewährleistet. Nutzen Sie die Kombination aus hoher Standzeit durch Materialqualität und kraftsparendem Schneidwinkel für präzise Metallbearbeitung. Bestellungen und technische Rückfragen können direkt über Metav angefragt werden. Spiralbohrer von MetavCUT – HSS‑G Kurzbohrer Der Spiralbohrer ist ein kurz ausgeführter HSS‑G Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. HSS‑G geschliffen für hohe Schnittgeschwindigkeit 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung für maximale Stabilität Geeignet für Stahl, Guss und Nichteisenmetalle Zylinderschaft gemäß DIN 338 für gängigen Einsatz Hohe Schnittleistung bei geringerer Anpresskraft Der Einsatz von HSS‑G sorgt für deutlich schnellere Vorschübe und eine spürbar geringere Anpresskraft im Vergleich zu herkömmlichem Schnellarbeitsstahl. Für Anwender bedeutet das weniger Ermüdung bei Handarbeiten und kürzere Bearbeitungszeiten bei Serien. Diese Materialwahl erhöht die Standzeit und reduziert Stillstandszeiten in der Werkstatt. Präzision durch kurze Bauform und geschliffenen Schaft Die kurze Ausführung und der geschliffene Schaft minimieren Auslenkungen bei der Aufnahme, sodass präzise Bohrbilder auch bei schwierigen Werkstücken erreichbar sind. Anwender profitieren von geringerer Wandraubbildung und saubereren Bohrlöchern, besonders bei gehärteten oder dickwandigen Bauteilen. Optimiert für harte Materialien und schwer zugängliche Bohrstellen Mit einem Spitzenwinkel von 135° ist dieser Bohrer speziell auf härtere Werkstoffe abgestimmt; durch den flacheren Winkel wird das Anbohren von Edelstahl und Temperguss erleichtert. Dadurch reduziert sich das Ausbrechen an der Austrittskante und die Nacharbeit verringert sich deutlich. Einfache Einsetzbarkeit und vielseitige Anwendung Die Auslegung nach DIN 338 macht den Bohrer kompatibel mit gängigen Zylinderschaft‑Aufnahmen, wodurch er sich sowohl für Handbohrmaschine als auch für stationäre Geräte eignet. Diese Vielseitigkeit erleichtert die Integration in bestehende Arbeitsabläufe und bietet eine zuverlässige Lösung für Werkstätten und Montagebetriebe. Zielgruppe und typische Einsatzzwecke Der kurze Spiralbohrer richtet sich an Profi‑Werkstätten, Metallbauer und fortgeschrittene Heimwerker, die saubere Bohrbilder in legierten und unlegierten Stählen erzielen wollen. Besonders dort, wo Stabilität und Wiederholgenauigkeit zählen, bietet dieser Bohrer einen klaren Vorteil. Für präzise Metallbohrungen den HSS‑G Spiralbohrer von MetavCUT wählen und bei Rückfragen direkt per E‑Mail info@metav-werkzeuge.com die technische Beratung anfordern. Produktmerkmale Artikelnummer: 27048-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Basic Line Norm: DIN 338 (kurze Spiralbohrer) Typ: Typ N Daten Durchmesser: 4,8 mm Gesamtlänge: 86 mm Spirallänge: 52 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaftausführung: geschliffen Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Farbe: blank Verpackungseinheit: 10 Anwendung: Bohrer für Metall FAQ Wie eignet sich der Bohrer für Edelstahl? Der Spiralbohrer von MetavCUT (SKU 27048-FDA) mit 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl geeignet, da der flachere Winkel das Anbohren erleichtert und das Ausbrechen reduziert. Welche Vorteile bietet die HSS‑G Ausführung? Die HSS‑G Ausführung des MetavCUT Spiralbohrers ermöglicht schnelleres Bohren bei geringerer Anpresskraft und erhöht dadurch die Standzeit im Vergleich zu Standard‑HSS‑Bohrern. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, dieser kurze Spiralbohrer ist für den Einsatz an Handbohrmaschine vorgesehen und bietet durch die kurze Auskraglänge bessere Stabilität bei handgeführten Arbeiten. Was besagt die Norm DIN 338 in Bezug auf diesen Bohrer? DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft; der MetavCUT Spiralbohrer entspricht dieser Norm und ist daher standardisiert in Länge und Schaftform für breite Einsatzmöglichkeiten. Für welche Materialien ist der Typ N geeignet? Der Typ N (Normalspirale) des Spiralbohrers ist speziell für Metall, Eisen und Stahl konzipiert und weniger für sehr weiche Werkstoffe gedacht.

Twist Drill (Type N) short · 4 mm · 135° Tip · HSS‑G · Bright Finished · DIN 338 · Fully Ground Shank · MetavCUT The Twist Drill Type N short is a precision metal‑drilling bit for Drilling Machines, designed for stable, high‑performance holes in alloyed and unalloyed steels. Short design for high stability 4 mm Diameter for precise holes 135° Tip for hard materials like stainless steel Fully ground shank for accurate clamping Complies with DIN 338 for metalworking Faster, more efficient drilling in hard materials Deriving its cutting performance from HSS‑G Metallurgy, this Twist Drill combines high wear resistance with reliable edge retention. The 135° Tip reduces chipping when penetrating hardened surfaces and shortens lead time on initial contact, so each hole is drilled with less wandering. As a result, workshops benefit from improved cycle times and consistent hole quality. Short design increases rigidity and accuracy A short overall length and a fully ground shank minimise deflection and vibration during machining. According to DIN 338 classifications for short Twist Drills, the reduced overhang delivers higher stability on both stationary and handheld Drilling Machines. This construction is particularly advantageous when precision, roundness and repeatability are priorities. Lower feed forces and broader material range Thanks to the optimized geometry of the HSS‑G flute and the Type N Normal Spiral, this Twist Drill enables up to 40% faster drilling and requires up to 50% less feed force compared with conventional HSS bits. The design makes it well suited for alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and hard Plastics, while still offering straightforward resharpening when required. Ideal users and workshop applications Manufactured for professionals in metalworking, maintenance and precision engineering, the MetavCUT Twist Drill supports demanding shop environments where consistent hole quality matters. Its bright finished surface and short flute length offer easy chip evacuation for drilling depths up to its overall length, while the compact format makes it suitable for confined setups and multi‑tool fixtures. MetavCUT recommends the Twist Drill Type N short HSS‑G for precision metalwork and heavy‑duty shop tasks — for expert technical advice or to confirm suitability contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27040-FDA Model Series: Basic Line Type: Typ N Diameter: 4 mm Material: HSS-G Norm: DIN 338 Execution: short Shaft Finish: fully ground Spiral Length: 43 mm Overall Length: 75 mm Tip Angle: 135° Colour: bright finished For: Drilling Machine Application: Drill for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit the MetavCUT Twist Drill Type N short? The MetavCUT Twist Drill Type N short is primarily used for drilling metal; its HSS‑G composition and 135° Tip make it suitable for alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics, offering reliable hole quality in demanding applications. Which three drill types exist and where does the MetavCUT Twist Drill fit? Three common drill categories are Metal Drills, Wood Drills and Masonry/Concrete Drills. The MetavCUT Twist Drill Type N short is a Metal Drill (Type N Normal Spiral) optimised for metalworking tasks. For what is a Twist Drill generally used? A Twist Drill is chiefly applied to the machining of high‑strength materials and larger diameters; it is easy to resharpen and withstands substantial loads, which is why the MetavCUT Twist Drill is recommended for robust metalworking duties.