Twist Drill – Left-Cutting HSS-G Twist Drill (Ø 1.5 mm, 135° Tip, DIN 338) The Twist Drill left-cutting bit for drilling machines, designed for precise metalworking and for tasks such as removing broken or seized screws. Left-cutting geometry for extracting screws 135° tip for hard materials and stainless steel HSS‑G material for high wear resistance Conforms to DIN 338 for short shank drills Optimised for drilling machines with left rotation Faster metalworking with reduced feed forces The Twist Drill with left‑cutting geometry is engineered for efficient metalworking. Its specialised grind allows cutting in left rotation, which is particularly helpful when extracting broken or seized screws. Compared with standard HSS bits, the sharpened design can achieve up to 40% faster drilling while requiring about 50% less feed force, making machining less strenuous on both operator and machine. Precision entry and less wandering on tough materials A 135° Tip is selected to improve centring and reduce walking on hard materials such as stainless steel. The larger tip angle shortens the initial penetration time and produces a more controlled cut, which is advantageous when working with thicker or tougher alloys. For operators, this means cleaner holes and less need for pilot operations. Durable HSS‑G composition and standardised manufacture Made from HSS‑G, this bit combines high-speed steel hardness with good toughness for repeated use in metalworking. Compliance with DIN 338 ensures consistent dimensions and quality for short shank, cylindrical Twist Drills, so replacement and inventory management are straightforward. For non-experts: DIN 338 describes the geometry and production methods commonly used for short metal drills, ensuring interchangeability across suppliers. Application range and machine compatibility Designed for drilling in a range of metals including alloyed and unalloyed steels, cast steel, and non-ferrous metals, this left‑cutting Twist Drill performs best in a drilling machine that can run in left rotation. Typical uses include general metal fabrication and specialised tasks like out‑drilling screw remains. Operators needing clean, repeatable results from metal to hard plastics will find this bit reliable and robust. Strongly recommended for professionals and workshops requiring a left‑cutting high‑performance Twist Drill from MetavCUT — for technical advice or to confirm suitability for specific applications contact METAV Werkzeuge; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 60015-FDA Diameter: 1.5 mm Tip angle: 135° Execution: Left-cutting For: Drilling machine (left rotation required) Material: HSS‑G Norm: DIN 338 Model series: Profi Line Application: Drills for metal Designation: Twist Drill (short shank, cylindrical) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills from MetavCUT are primarily applied to machining high-strength workpieces and larger drill diameters; their design is easy to re‑grind and withstands higher loads, making them suitable for tasks such as drilling alloyed and unalloyed steel, cast materials and hard plastics. Which three drill types are there? The main drill categories are: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for metallic materials. Can the MetavCUT Twist Drill be used to remove broken screws? Yes, the left‑cutting MetavCUT Twist Drill is designed for applications including extracting broken or seized screws because the left rotation often helps engage and loosen a screw remnant while drilling.

Twist Drill — Metal Twist Drill (HSS‑G), Ø 1.5 mm, 135° Tip, DIN 338, Model Spezial, Shaft without multi‑bevel cutting edge and triangular shank, Overall Length 40 mm, Spiral Length 18 mm, Brand MetavCUT A versatile Twist Drill metal drill bit designed for drilling machines and hand drills, engineered for precise holes in a wide range of metals and technical plastics. HSS‑G material for high wear resistance 135° Tip for clean entry in hard materials Conforms to DIN 338 for short cylindrical drills Up to 40% faster drilling performance Reduced feed force by up to 50% Maximise Speed and Reduce Effort with Advanced HSS‑G Technology The HSS‑G composition of this twist drill delivers elevated hardness and thermal stability, which translates into faster drilling and longer tool life when working with alloyed and unalloyed steels. Thanks to the optimized geometry and the 135° Tip, initial penetration is smoother and the risk of walking is reduced, allowing for consistent centring and clean holes. This combination reduces the required feed force, making drilling less physically demanding and improving cycle times on both stationary and portable Drilling Machines. Reliable Hole Quality for Metalworking and Technical Plastics Designed in accordance with DIN 338, this short twist drill provides reproducible results in metals such as Steel, Cast Steel, Gusseisen and Non‑Ferrous Metals, as well as in Hard Plastics. The carefully ground tip produces grit‑free hole edges, minimising post‑processing. For craftsmen and technicians who value neat, repeatable holes, this tool reduces burr formation and supports high‑quality assembly work in workshop and production settings. Practical Use and Compatibility with Common Machines Engineered for use with Hand Drills and standard Drilling Machines, the Twist Drill offers straightforward handling for everyday metalworking tasks. The specified overall and spiral lengths (40 mm and 18 mm respectively) suit through‑holes and shallow blind holes up to typical depths used in mechanical assembly. Because the shaft is supplied without multi‑bevel cutting edge and triangular shank, verify machine chuck compatibility before use; METAV Werkzeuge provides expert advice to ensure the correct bit‑and‑chuck pairing. Who Benefits Most from This Twist Drill This drill bit is aimed at professionals and advanced hobbyists who require dependable performance in metalworking operations. Production technicians, maintenance teams and toolroom staff benefit from predictable cutting behaviour and reduced tool changes due to wear. For those specifying tools for workshop fleets, the conformity to DIN 338 simplifies standardisation and procurement decisions. Durability, Standards and Safe Handling The short design and the HSS‑G material ensure dimensional stability during repeated cycles, while the 135° Tip is especially suitable for tougher materials such as stainless steel. Observing appropriate cutting speeds, coolant use and clamping methods will prolong service life and maintain hole quality. For complex applications or unusual alloys, METAV Werkzeuge offers tailored technical support to define speeds, feeds and coolant strategies. Strongly recommended: Choose the MetavCUT Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for personalised technical consultation — they provide comprehensive advice to ensure the correct tool selection and optimal machining parameters. For assistance: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 55015-FDA Diameter: 1.5 mm Tip Angle: 135° Spiral Length: 18 mm Overall Length: 40 mm Material: HSS‑G Standard: DIN 338 Model Series: Spezial Shaft Execution: without multi‑bevel cutting edge and triangular shank Intended Use: Drills for metal Suitable Machines: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (metal Twist Drill) reliably machine? The MetavCUT Twist Drill in HSS‑G is designed for machining alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast Iron, Non‑Ferrous Metals and Hard Plastics. Its material and geometry ensure wear resistance and consistent cutting performance when used with appropriate speeds and cooling. Why are Twist Drills used and where do they perform best? Twist Drills are primarily used for machining high‑strength materials and larger diameters; they are easy to resharpen and withstand significant loads. The MetavCUT Twist Drill is especially suited to metalworking tasks where clean entry and rapid drilling are required. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills, reflecting the principal material groups and typical cutting geometries. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑edge at the point of the twist drill, lowering friction and therefore the feed force required. A properly sharpened tip also improves centring in the workpiece, resulting in more accurate and efficient drilling.

Spiralbohrer von MetavCUT – Profi Line (10 mm, linksschneidend) Der Spiralbohrer ist ein kurzspiraliger HSS-G Bohrer mit Linksschneidung für Metallbohrungen, konzipiert für Handbohrmaschine und stationäre Anwendungen Hochleistungs-HSS-G für lange Standzeiten Linksschneidend für Ausbohren festsitzender Schrauben Spitzenwinkel 135° für harte Werkstoffe Kurzer Spiralbohrer nach DIN 338 mit Zylinderschaft Schnelleres Bohren und spürbar geringerer Kraftaufwand Der Einsatz des Spiralbohrers aus HSS-G ermöglicht nach Herstellerangaben ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Diese Effizienz resultiert aus der speziellen Linksschneidung und der optimierten Spanabfuhr, wodurch Bearbeitungszeiten sinken und die Belastung von Maschine und Anwender reduziert wird. Für den Werkstattalltag bedeutet das: höhere Produktivität bei gleichbleibender Lochqualität. Materialeigenschaften, die Standzeit und Präzision sichern Gefertigt aus HSS-G (Schnellarbeitsstahl) bietet der Bohrer erhöhte Warmfestigkeit und Verschleißresistenz. Der Spitzenwinkel 135° wurde gewählt, um das Anbohren in harten Werkstoffen wie legiertem Stahl oder Gusseisen zu erleichtern und die Zentrierneigung zu reduzieren. Die Ausführung entspricht der Norm DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert; dadurch sind Wiederholgenauigkeit und Austauschbarkeit in industriellen Abläufen gewährleistet. Geeignete Anwendungen und Maschinenkompatibilität Die linksschneidende Ausführung ist speziell für Arbeiten gedacht, bei denen Linkslauf erforderlich ist, zum Beispiel zum Ausdrehen abgebrochener oder festsitzender Schrauben. Gleichzeitig eignet sich der Bohrer für das Bohren in legierte und unlegierte Stähle, Gusswerkstoffe, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe. Die Konstruktion passt zu Handbohrmaschine und stationären Bohrmaschinen mit Zylinderschaft-Aufnahme, wobei bei tieferen Bohrungen auf geeignete Spanabfuhr zu achten ist. Anwendernutzen: Präzision, Effizienz und Zuverlässigkeit Für Anwender bedeutet die Kombination aus robuster Werkstoffwahl, passendem Spitzenwinkel und Linksschneidung weniger Nacharbeit und weniger Werkzeugwechsel. Die Verpackungseinheit mit mehreren Teilen erleichtert die Ersatzplanung in der Werkstatt. Die Profi Line von MetavCUT steht für konsequente Produktionsqualität und eignet sich für Werkstätten, Instandhaltung und produzierende Betriebe, die verlässliche Resultate bei Metallbearbeitung erwarten. Für präzise und effiziente Metallbohrungen die MetavCUT Profi Line wählen — Bestellanfragen gern per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 einreichen, alternativ WhatsApp +49 170 2837271 nutzen Produktmerkmale Artikelnummer: 60100-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 10 mm Verpackungseinheit: 5 Stück Spitzenwinkel: 135° Besonderheiten Ausführung: linksschneidend (für Linkslauf) Material: HSS-G (Schnellarbeitsstahl) Norm: DIN 338 (kurze Spiralbohrer) Für: Handbohrmaschine FAQ Welche Materialien lassen sich mit dem Spiralbohrer von MetavCUT bearbeiten? Der Spiralbohrer von MetavCUT (Profi Line, SKU 60100-FDA) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Nichteisenmetalle sowie Hartkunststoff. Brauche ich eine spezielle Bohrmaschine für die linksschneidende Ausführung? Für die linksschneidende Ausführung ist ein Linkslauf an der Bohrmaschine erforderlich; der MetavCUT Profi Line Spiralbohrer arbeitet im Linkslauf zuverlässig und ist daher besonders beim Ausbohren festsitzender Schrauben effektiv. Warum ist der Spitzenwinkel 135° vorteilhaft? Der Spitzenwinkel 135° des MetavCUT Spiralbohrers reduziert die Anbohrzeit und verbessert die Führung beim Bohren in harten Werkstoffen, wodurch die Präzision bei Edelstahl und gehärteten Stählen steigt. Wie viele Bohrer sind in einer Lieferung enthalten? Die Verpackungseinheit des MetavCUT Profi Line Spiralbohrers beträgt 5 Stück, vermerkt unter der Artikelnummer 60100-FDA, was eine einfache Vorratsplanung ermöglicht. Ist der Bohrer nach DIN 338 gefertigt und was bedeutet das? Ja, der Bohrer entspricht der Norm DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert; das garantiert standardisierte Abmessungen und Kompatibilität zu gängigen Spannfuttern.

Twist Drill — HSS‑G Metal Drill, 10 mm, 135°, DIN 338, with multi‑bevel cutting edge and triangular shank (MetavCUT) A Twist Drill engineered for Drilling Machines and Hand Drills, optimised for fast, precise metalworking and burr‑free holes. HSS‑G construction for high wear resistance 10 mm diameter for standard metalwork 135° tip for hard materials like stainless steel Triangular shank for secure clamping in cordless drills Conforms to DIN 338 for short twist drills Faster, more efficient metal drilling with reduced feed force The Twist Drill from MetavCUT uses a ground HSS‑G geometry that enables up to 40% faster drilling while requiring 50% less feed force than conventional HSS bits. This benefit translates into quicker cycle times on both stationary Drilling Machines and portable Hand Drills and reduces operator fatigue during repetitive tasks. The bit is particularly suited for alloyed and unalloyed steel, cast steels, sintered iron, non‑ferrous metals and hard plastics, allowing professional workshops to increase throughput without sacrificing hole quality. Cleaner entry and improved centering for professional results A 135° tip angle combined with the multi‑bevel cutting edge produces reliable centering and minimises burr formation at the hole edge. For harder materials such as stainless steel the flatter tip reduces walking and shortens pilot times, resulting in clean, grat‑free holes even at higher spindle speeds. The W‑style point is easier to resharpen than more complex geometries, which helps maintain precision over many regrinds and extends the serviceable life of the tool. Secure handling and broad machine compatibility Designed with a triangular (3‑flat) shank, this drill bit offers excellent torque transmission and prevents slippage in standard chucks and quick‑change adaptors of cordless drills. The Spiral Length of 87 mm and Overall Length of 133 mm provide a practical working reach while keeping rigidity for accurate bore guidance. Conformity to DIN 338 assures that dimensions and tolerances meet the expectations of professional metalworkers and integrate smoothly into workshop tooling systems. Robust application range and target users This HSS‑G Twist Drill is aimed at craftsmen, maintenance teams and production engineers who demand consistent performance when working with a variety of metals and technical plastics. The bit’s combination of material, tip design and shank execution makes it especially suitable for demanding repair jobs, prototype workshops and small‑batch production where both speed and hole quality matter. MetavCUT’s Spezial series focuses on reliable, repeatable results in metalworking environments. Choose MetavCUT’s precision HSS‑G Twist Drill for demanding metalworking tasks — and contact METAV Werkzeuge for personalised technical advice via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 55100-FDA Diameter: 10 mm Material: HSS‑G Tip angle: 135° Spiral length: 87 mm Overall length: 133 mm Shank execution: with multi‑bevel cutting edge and triangular shank Model series: Spezial Application: Drills for metal Norm: DIN 338 Suitable for: Drilling Machine, Hand Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger drill diameters; it is especially effective in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its form is easy to resharpen and designed to withstand higher loads while maintaining good drilling performance. Which three drill types are commonly distinguished in workshops? In workshop practice the three main categories are metal drills (such as the MetavCUT Twist Drill), wood drills and stone/concrete drills. Each type is optimised for its material class and offers different point geometries and flute designs to achieve the required hole quality.

Twist Drill (Left-Cutting) – 1 mm, 135°, HSS‑G, DIN 338 The Twist Drill (left‑cutting) for Drilling Machine combines a 1 mm diameter and a 135° tip angle with HSS‑G material and DIN 338 classification for reliable metal machining Left‑cutting geometry for screw extraction and reverse drilling High‑speed steel HSS‑G for increased wear resistance 135° tip angle optimised for hard materials and stainless steel Short DIN 338 design for stable guidance and machine use Precision cutting for demanding metalworking tasks The left‑cutting Twist Drill from MetavCUT offers a targeted solution when conventional drills fail: its left‑cutting grind enables effective removal of broken or seized screws and fasteners by working in reverse rotation. The 135° tip angle reduces breakthrough and improves centring in harder materials such as stainless steel, while the short DIN 338 geometry ensures reliable guidance in stationary or portable Drilling Machines. This results in faster, more predictable results and less time spent on rework. Faster drilling with less operator force Engineered as a HSS‑G tool, the bit allows up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills in comparable tasks. This efficiency is particularly relevant when working with alloyed and unalloyed steels, cast steels, sintered iron, non‑ferrous metals and hard plastics. Reduced feed force lowers operator fatigue and decreases the risk of drill wandering, so holes are cleaner and more precise with less machine strain. Robust construction and standardised dimensions for workshop use Manufactured to DIN 338, the short Twist Drill with a cylindrical shank is suitable for both roll‑peened and ground versions depending on production. The HSS‑G grade provides a balanced combination of toughness and hardness, prolonging tool life under intermittent or serial drilling conditions. The compact form factor makes the drill easy to clamp in chucks for hand drills as well as in toolholders on machine spindles, ensuring versatility across workshop setups. Practical recommendations and typical applications This left‑cutting Twist Drill is especially suitable for metalworking shops and maintenance teams facing broken screw extraction, repair tasks and drilling in tougher alloys. For general drilling in wood or masonry, select the corresponding specialist drill type; metal drills can be used in wood but typically deliver less precise guidance and finish. When unsure whether this MetavCUT Twist Drill meets specific requirements, METAV Werkzeuge offers expert advice and technical support to help choose the right tool and cutting parameters. Highly recommended: MetavCUT left‑cutting Twist Drill for specialist metal repair and extraction tasks — for personalised technical advice contact METAV Werkzeuge. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60010-FDA Diameter: 1 mm Tip Angle: 135° Execution: left‑cutting For Drilling Machine: Drilling Machine Material: HSS‑G Norm: DIN 338 Model Series: Profi Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (left‑cutting) is primarily used for metalworking tasks; it is applied especially when machining high‑strength materials and larger diameters. Its design is simple to resharpen and withstands high loads, making it suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. Which three drill types are commonly distinguished? Three principal categories are Metal Drill, Wood Drill and Stone/Concrete Drill, each optimised in geometry and material for its typical application field.

MetavCUT Twist Drill — HSS‑G Twist Drill (Ø 1 mm, 135° tip, DIN 338, Spezial series, Shaft execution: without W‑tip and 3‑Kantschaft) The MetavCUT Twist Drill is a precision HSS‑G drill for metalworking, designed for fast, clean holes in a variety of engineering materials and suitable for use with drilling machines and handheld drills. Fast drilling: up to 40% quicker with ground HSS Lower feed force: needs 50% less pressure during drilling Optimised for alloyed and unalloyed steels 135° tip angle for harder materials and stainless steel Increased productivity through optimised HSS‑G geometry Ground on a precision profile, the bit delivers notably higher advance rates. The specially ground HSS‑G geometry enables up to 40% faster drilling while requiring 50% less feed force, which reduces operator fatigue and speeds up repetitive tasks. This advantage means fewer tool changes and more efficient cycle times in workshop and production environments. Clean, centred holes even in tough materials A 135° point angle reduces walking and improves centring on hard materials such as stainless steel. In practice, this leads to cleaner hole edges and fewer burrs, so secondary deburring work is minimised. Compliance with DIN 338 ensures the short twist‑drill dimensions and tolerances expected in metalworking applications, providing predictable, repeatable results. Versatile application across common engineering materials Designed for demanding jobs, the bit is suitable for legioned and unlegioned steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals, hard plastics and aluminium. When paired with an appropriate drilling machine and cutting parameters, the tool enables reliable metal removal and consistent hole quality for maintenance, fabrication and mechanical workshops. Who benefits and when to seek advice Maintenance technicians, toolroom staff and metal fabricators will value the combination of speed and hole quality. If uncertain whether this tool matches a specific application or machine setup, the retailer METAV Werkzeuge offers expert support and technical advice to help choose the correct diameter, flute length and cutting parameters — contact details are provided below. Recommendation: Choose the MetavCUT HSS‑G Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice via info@metav-werkzeuge.com, tel +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 55010-FDA Diameter: 1 mm Overall length: 34 mm Spiral length: 12 mm Tip angle: 135° Material: HSS‑G Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Shaft execution: ohne W‑Spitze und 3‑Kantschaft Model series: Spezial Axite enrichment: Der geschliffene HSS Bohrer ermöglicht ein bis zu 40 % schnelleres Bohren und benötigt dabei 50 % weniger Anpresskraft als herkömmliche aus HSS gefertigte Bohrer. Er eignet sich besonders zum Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. DIN 338: Die Norm DIN 338 dient der Klassifizierung kurzer Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl. In der Norm werden die verschiedenen Ausführungen und Herstellungsverfahren näher definiert. Der kurze Spiralbohrer mit Zylinderschaft kann rollgewalzt oder geschliffen gefertigt sein. Anwendungsgebiet dieses Bohrers ist hauptsächlich die Bearbeitung von Metall an drehenden stationären oder beweglichen Werkzeugmaschinen. Es gibt unterschiedliche Ausführungen, Oberflächenbehandlungen und Durchmesser des Spiralbohrers nach der Norm DIN 338. Die Norm DIN 338 definiert „kurze Spiralbohrer mit Zylinderschaft“ aus HSS usw. – genau so steht es in den Herstellerinfos: DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft. Der HSSG Spiralbohrer „Rapid„ ist ein Garant für schnelle und präzise Bohrungen in Stahl, Eisen, Buntmetalle, Aluminium, Kunststoffe und Holz. Die speziell angeschliffene Bohrspitze sorgt für sauberes Anbohren und erzielt dadurch Bohrungen mit gratfreien Lochrändern bei schnellem Bohrfortschritt. Durch den 3 Kant Schaft ist der Rapid Bohrer ideal für effizientes Arbeiten mit Akkubohrmaschinen geeignet. Der Spitzenwinkel eines Bohrers: bestimmt, wie leicht er sich in ein Werkstück eindringt und ist je nach Material anzupassen. Spitzenwinkel 135° für härtere Werkstoffe wie Edelstahl. ein größerer Winkel die Anbohrzeit verkürzen kann. Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill cut effectively? The MetavCUT Twist Drill is designed for a broad range of engineering materials; it performs well in alloyed and unalloyed steel, cast steels, cast iron, sintered iron, malleable iron, non‑ferrous metals, aluminium and hard plastics when used with correct cutting data and a suitable drilling machine. Can the MetavCUT Twist Drill be used in a handheld drilling machine? Yes, the MetavCUT Twist Drill is suitable for use with drilling machines and handheld drills provided the machine can be set to recommended speeds and feeds for the 1 mm diameter and chosen workpiece material. What is a Twist Drill used for? A Twist Drill is mainly used for machining high‑strength materials and larger diameters. This design is easy to regrind and withstands high loads. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of the Twist Drill. By pointing, friction is significantly reduced so lower feed forces are required and the tip centres better in the workpiece. Can you use a Twist Drill to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is poorer and the result is less clean. Metal drills are easier to resharpen and have lower self‑feeding tendency.

Twist Drill (Left-cutting) 2.5 mm — HSS‑G, 135° | MetavCUT Profi Line The Twist Drill by MetavCUT is a left-cutting HSS‑G drill designed for metalworking and targeted screw-extraction tasks when using a drilling machine or compatible hand drill. Left-cutting for counterclockwise screw extraction 135° point angle for harder materials HSS‑G construction for heat resistance and durability Conforms to DIN 338 for short shank drills Faster metalworking thanks to left-cutting geometry The left-cutting design of this Twist Drill allows reliable counterclockwise cutting, which is particularly useful when removing broken or seized screws. Because the flute and cutting lip are configured for left rotation, the Tool often reduces the need for additional extraction steps and supports quicker intervention in repair and maintenance. This geometry also contributes to decreased thrust forces, so drilling becomes more controlled and efficient. Robust HSS‑G material for sustained performance Manufactured from HSS‑G, the drill offers improved heat resistance and wear behaviour compared with standard high-speed steels. This ensures longer tool life under continuous use and when tackling tougher Alloys. Users benefit from consistent cutting performance and reduced tool changes, which is valuable in production runs or workshop environments where downtime impacts throughput. Optimised for harder metals with a 135° point angle A 135° point angle is tailored for entry into harder Materials such as Stainless Steel and other alloys, reducing walking and improving centring on difficult surfaces. For less experienced operators: the point angle describes how steep the tip is—larger angles penetrate more gradually and are better suited to hard Substrates, whereas sharper angles are used for softer Materials. This feature helps achieve cleaner holes and more predictable results when working with metal. Engineered to industry standard DIN 338 for consistent compatibility Conforming to DIN 338 means the product meets established dimensions and tolerances for short shank twist drills, simplifying tool selection and machine setup. Workshops can rely on predictable shank fit and tool behaviour across machines. The Profi Line execution reflects a focus on practical workshop use, where reproducibility and interchangeability matter for efficient tool management. Strong recommendation: Choose MetavCUT for demanding metalwork—contact METAV Werkzeuge for expert advice and personalised support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60025-FDA Diameter: 2.5 mm Point Angle: 135° Material: HSS‑G Execution: left-cutting Suitable for: Drilling Machine / Hand Drill Model Series: Profi Line Application: Drills for Metal Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and in which situations is the MetavCUT Twist Drill particularly suitable? Twist Drills like the MetavCUT Twist Drill are primarily used for metalworking and are especially effective when machining high‑strength Materials or when extracting broken screws; the left-cutting variant is designed to cut when the spindle runs counterclockwise, aiding screw removal and reducing required feed force. Which three drill types are commonly distinguished and where does the MetavCUT Twist Drill fit in? The three main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for use in metalworking applications.

Data conflict detected — inconsistent shaft information The provided product data contains contradictory details about the shank: the field "shaft_ausfuhrung" states "without multi-bevel cutting edge and triangular shank", while the product description (axite_enrichment) repeatedly refers to a "3-Kant Schaft" (triangular shank). This inconsistency raises concerns about the accuracy of the product specifications and could potentially lead to confusion for customers seeking precise information about the item. It is essential to resolve this discrepancy to ensure that all product details align correctly. Cannot generate a reliable product description until the shank/shaft information is clarified and confirmed to avoid any misunderstandings or misrepresentations in the product listing.

Twist Drill – Left-Cutting HSS‑G, 2 mm, 135° (DIN 338) A Twist Drill from MetavCUT designed as a left-cutting metalworking drill for drilling machines, ideal for removing broken screws and precision metal drilling. Precision 2 mm diameter for tight tolerances 135° tip for harder materials like stainless steel Left-Cutting grind for screw extraction tasks High-speed HSS‑G material for long tool life Complies with DIN 338 for short twist drills Durable HSS‑G Construction for Consistent Performance Built from HSS‑G, this Twist Drill delivers a combination of toughness and wear resistance required for industrial metalworking. The alloyed high-speed steel provides a stable cutting edge and extended service life, so fewer tool changes are needed during workshop routines. This results in predictable performance and reduced downtime when processing materials such as steel, cast iron and non‑ferrous metals. Faster Penetration and Lower Feed Force for Hard Materials When working with tougher materials, the 135° tip geometry and the left‑cutting grind enable a more controlled entry and a flatter cutting action, which is particularly effective for stainless steel. The specially ground left‑cutting design can reduce required thrust and, according to manufacturer data, can achieve significantly faster drilling rates while lowering operator effort — a clear advantage in repetitive or demanding drilling tasks. Practical Use Cases: Repair, Extraction and Precision Drilling In repair and maintenance contexts the left‑cutting execution proves especially useful for backing out broken or seized fasteners, because the reverse rotation often helps remove screw remnants. The short cylindrical shank is suited for mounting in conventional drilling machines and ensures stable clamping. MetavCUT’s Profi Line aims at tradespeople and workshops that require reliable tools for metal fabrication, maintenance and engineering tasks. Compliance, Care and Compatibility for Industrial Workflows Complying with DIN 338, this short twist drill is specified for cylindrical shank drills made of high‑speed steel and is suitable for machine use on stationary or portable drilling machines with left rotation. The geometry also makes re‑grinding straightforward, so sharpening and reconditioning are practical in a workshop setting. For users unsure about compatibility with a specific machine or material, METAV Werkzeuge provides expert guidance and technical support. Choose the MetavCUT Profi Line Twist Drill for dependable left‑cutting performance in metalworking; METAV Werkzeuge offers comprehensive advice and technical support — email info@metav-werkzeuge.com, call +49 2822 7131930 or contact via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60020-FDA Model Series: Profi Line Execution: Left-Cutting For Drilling Machine: Drilling Machine Tip Angle: 135° Diameter: 2 mm Material: HSS-G Norm: DIN 338 Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? Twist Drills from MetavCUT are used primarily for machining high‑strength materials and larger drill diameters; this type of Twist Drill is slightly easier to re‑sharpen and withstands higher loads, making it suitable for extracting broken screws and demanding metalworking operations. Which 3 drill types are there? The main categories are Metal Drills, Wood Drills and Masonry/Concrete Drills; MetavCUT supplies Twist Drills specifically designed for metalworking applications.

Twist Drill – Drill Bit for Metal, 2 mm, 135° Point Angle, HSS‑G, DIN 338 The Twist Drill is a precision metalworking drill bit designed for drilling machines and hand drills, offering a 2 mm diameter, 135° point angle and HSS‑G construction for reliable, fast metal drilling. Twist Drill 2 mm for metal 135° Point Angle for harder materials HSS‑G for high wear resistance Conforms to DIN 338 standard Up to 40% faster drilling with less force Exceptional Durability from HSS‑G Construction The Twist Drill is made from HSS‑G (High Speed Steel with enhanced grinding), which provides improved wear resistance and thermal stability compared with standard HSS. This material choice reduces tool wear during repeated metal drilling operations and extends service life, so fewer replacements are needed. The robust construction is particularly advantageous when working with alloyed and unalloyed steels, cast steels and non‑ferrous metals. Faster, Cleaner Holes with a 135° Point A 135° point angle optimises entry into harder materials by reducing chipping and improving centering on stainless steels and hardened surfaces. The specially ground tip ensures clean starting and produces holes with reduced burr formation. According to the product specification, the design enables up to 40% faster drilling and requires significantly less feed force, which makes bench and portable drilling more efficient and reduces operator fatigue. Designed for Metalworking and Versatile Use This Twist Drill is intended primarily as a Drill for Metal, suitable for cast iron, steels, aluminium and certain plastics. The geometry and material mean it also performs acceptably in mixed‑material workshops where quick tool changes and reliable centring are required. For cordless or portable applications, check shank compatibility on your Drilling Machine before use; if in doubt, METAV Werkzeuge offers expert guidance to select the right bit for the power tool. Standards, Dimensions and Practical Details Manufactured to DIN 338 for short twist drills with cylindrical shank, the bit measures 2 mm in diameter with a total length of 49 mm and a spiral (cutting) length of 24 mm. The provided shank execution information indicates the absence of a multi‑bevel W‑point and a triangular shank variant, so users should verify chuck compatibility on their equipment before use. These specifications support predictable performance in production and workshop settings where reproducible hole quality is required. We recommend the MetavCUT HSS‑G Twist Drill for precision metal drilling — for tailored technical advice or help choosing the right drill for your machine, contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 55020-FDA Durchmesser: 2 mm Spitzenwinkel: 135° Material: HSS‑G Norm: DIN 338 Gesamtlänge: 49 mm Spirallänge: 24 mm Anwendung: Drill for Metal Für Bohrmaschine: Handbohrmaschine / Drilling Machine Schaft Ausführung: without multi-bevel cutting edge and trianglular shank Modellserie: Spezial Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials does it suit? The MetavCUT Twist Drill is primarily a Drill for Metal and is used for machining alloyed and unalloyed steel, cast steel, cast iron, non‑ferrous metals and hard plastics; its geometry and HSS‑G material make it suitable for workshop and machine shop applications where clean, precise holes are required. Which three main drill types exist? Common drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill falls into the Metal drill category and is optimised for metalworking. Why are Twist Drills point‑sharpened? The tip sharpening reduces the cross‑cut at the drill tip, which lowers friction and therefore requires less feed force; the sharpened point of the MetavCUT Twist Drill also improves centring and reduces walking on the workpiece. Can a Twist Drill be used for wood? A Metal drill such as the MetavCUT Twist Drill can be used in Wood but will typically give poorer guidance and a less clean finish compared with dedicated wood drills; metal drills are easier to regrind and have less self‑feeding tendency. For which hole depths is the Twist Drill most commonly used? Twist Drills are typically used for drilling through solid material; for diameters up to around 20 mm and drilling depths up to approximately 100 mm, the Twist Drill is the most common tool for such operations. Is HSS or HSSE better? The widespread assumption that HSSE is universally superior to HSS is incorrect; the choice depends on working conditions and cost justification — evaluate whether the specific operating environment warrants the higher investment before choosing HSSE over HSS.

Twist Drill – Left‑Cutting HSS‑G, 3.5 mm, 135° (DIN 338) | MetavCUT Profi Line The Twist Drill is a left‑cutting HSS‑G metal drill designed for use in Drilling Machines and Hand Drills for efficient extraction and machining of high‑strength materials. MetavCUT Profi Line Twist Drill Left‑cutting geometry for screw extraction HSS‑G material for high wear resistance 135° tip angle for hard metals like stainless steel Conforms to DIN 338 for short twist drills Engineered for faster, lower‑force metal drilling The Twist Drill from MetavCUT delivers a measurable Productivity advantage: the specially ground Left‑cutting geometry enables up to 40% faster drilling while requiring 50% less axial force compared with conventional HSS variants. This means less operator fatigue and more consistent hole quality when working with challenging materials. The 135° Tip Angle reduces initial skiving and shortens plunge time in hard substrates, making the tool particularly suited for demanding Metalworking tasks. Designed for extraction and tough applications Left‑cutting design is particularly effective when removing broken or seized screws because the counter‑rotation can engage and withdraw lodged fasteners. The MetavCUT Profi Line Twist Drill is recommended for a wide range of metals including Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Temperguss, Non‑Ferrous Metals and Hard Plastics. Use in a Drilling Machine with left‑hand rotation allows the special grind to perform as intended and increases the chance of extracting screw remnants during drilling. Material choice and what it means for longevity Constructed from HSS‑G (High‑Speed Steel, ground), this Twist Drill offers a balance between edge retention and re‑sharpenability for metalworking. Ground HSS enables a consistently sharp cutting geometry that supports higher feed rates and improves surface finish in the workpiece. For users who require repeatable performance and straightforward maintenance, the HSS‑G construction simplifies resharpening while maintaining cutting stability under continuous use. Compliance with standards and practical guidance The tool adheres to DIN 338, the specification for short Twist Drills with cylindrical shank produced from High‑Speed Steel; this ensures dimensional consistency and interchangeability in professional settings. The 3.5 mm Diameter and 135° Tip Angle are tailored for applications where centred start and reduced skidding are required on hard materials such as stainless steel. If unsure whether left‑cutting geometry fits your machine or task, METAV Werkzeuge offers competent technical advice and application support to confirm suitability before purchase. We strongly recommend the MetavCUT Profi Line Twist Drill for professional metalworking tasks and for operations requiring left‑cutting performance; for personalised technical guidance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Twist Drill Brand: MetavCUT SKU: 60035-FDA Diameter: 3.5 mm Tip angle: 135° Execution: Left‑cutting (linksschneidend) Material: HSS‑G Norm: DIN 338 For use in: Drilling Machine / Hand Drill Application: Drills for metal Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A MetavCUT Twist Drill (Twist Drill, metal drill) is mainly used for machining high‑strength materials and for larger bore diameters where robust cutting geometry is required. The left‑cutting variant is especially helpful when extracting broken or jammed screws, because the counter‑rotation often helps to turn out the screw remnant while drilling. The ground HSS design also supports faster drilling with lower feed forces. Which three drill types exist? Three common drill categories are: Metal Drills, Wood Drills, and Stone/Concrete Drills. The MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metalworking applications in both stationary and portable Drilling Machines. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for use in a Hand Drill as long as the machine supports left‑hand rotation for the left‑cutting execution; when used properly, it delivers reliable hole quality and can assist in screw extraction tasks. If unsure about compatibility, METAV Werkzeuge provides expert consultation to match tool and machine.

Twist Drill — HSS‑G Metal Drill, 3.5 mm, 135° tip, DIN 338, Spezial Series (with multi‑bevel cutting edge) The Twist Drill is a precision metalworking drill bit designed for demanding drilling tasks in alloyed and unalloyed steels and other metals, offering fast, centered starts and compatibility with standard Drilling Machines. High drilling speed with reduced thrust 135° tip for harder materials and stainless steel HSS‑G construction for metalworking applications Multi‑bevel cutting edge for clean, burr‑free holes Conforms to DIN 338 short spiral drill standard High performance for fast, efficient metalworking The HSS‑G composition and the specially ground geometry deliver notably faster drilling in a wide range of metals. Thanks to the multi‑bevel cutting edge, the tool achieves up to 40% faster progress while requiring up to 50% less feed force compared with conventional HSS bits. This efficiency reduces operator effort and machine load when working in steel, cast materials, non‑ferrous metals and technical plastics. For workshop environments where throughput and repeatable results matter, this cutting tool is engineered to increase productivity. Cleaner starts and better hole quality for tough materials A 135° tip angle is optimised for harder workpiece materials and helps prevent wandering on entry, producing clean, burr‑reduced hole edges. The reduced cross‑cut at the point lowers friction and the need for high feed forces, which improves centring and surface finish. For users who require precise hole geometry in stainless or tempered steels, this geometry reduces rework and downstream finishing, giving consistently better end results. Built for professional machines and demanding applications Designed according to DIN 338 for short spiral drills with cylindrical shank, this tool is intended primarily for metalworking on rotating stationary or mobile Drilling Machines. The Spezial series execution targets workshops and mechanical engineering settings where repeatability and tool life are required. If uncertainty exists about machine compatibility or the optimal drill for a specific alloy, METAV Werkzeuge provides expert technical support and application advice to ensure the correct tool choice. Standards, durability and practical use explained The designation HSS‑G denotes a high‑speed steel grade suited to metal drilling; it balances wear resistance and grindability for professional use. The DIN 338 reference identifies this as a short spiral drill with cylindrical shank and clarifies manufacturing and dimensional expectations. The included shaft execution — with multi‑bevel cutting edge, without triangular shank — ensures compatibility with standard chucks and quick change holders while maintaining precise cutting action. For users less familiar with drill geometry, the 135° tip simply means better performance and less walking in harder materials. We recommend the MetavCUT Twist Drill for precision metalworking where speed and clean hole quality are decisive — for application advice or technical questions contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 55035-FDA Diameter: 3.5 mm Tip angle: 135° Material: HSS‑G Model series: Spezial Shank execution: with multi‑bevel cutting edge, without triangular shank Spiral length: 39 mm Overall length: 70 mm Standard: DIN 338 Application: Drills for metal / suitable for Drilling Machine use Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily used for metalworking and is suitable for alloyed and unalloyed steels, cast materials, non‑ferrous metals and hard plastics; its geometry and HSS‑G construction make it effective for demanding drilling tasks in workshop and industrial settings. For what is a spiral drill (Twist Drill) typically applied? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; it is easy to regrind and withstands higher loads, which makes it especially useful for drilling steels and other demanding workpiece materials. Which three drill types are there? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking performance.

Introducing Twist Drill (Spiralbohrer) — MetavCUT HSS‑G left‑cutting, Ø 3 mm, 135° (DIN 338) The Twist Drill (Spiralbohrer) is a left‑cutting HSS‑G Twist Drill for metal, designed for use with Drilling Machines and Hand Drills for extracting broken fasteners and drilling in hard materials. Left‑cutting design for extracting broken screws HSS‑G material for high wear resistance 135° point angle for harder materials Conforms to DIN 338 for short cylindrical shanks Faster penetration and less operator effort for metalworking This Twist Drill from the Profi Line uses HSS‑G to provide high wear resistance and consistent edge retention when machining alloyed and unalloyed Steel, Cast Steel, Gusseisen, Sintereisen, Temperguss, Non‑Ferrous Metals and hard Plastics. The material choice offers a reliable balance between toughness and hardness, so the drill maintains a sharp cutting geometry longer and reduces tool changes. Compliance with DIN 338 signals suitability for short cylindrical shank applications on stationary and portable machines. Left‑cutting geometry reduces feed force and aids screw extraction The left‑cutting grind is intended for use with a machine capable of left rotation and is particularly useful when removing broken or seized screws because the counter‑rotation often helps to turn the screw fragment out. Compared with conventional HSS drills the specially ground variant can enable up to 40% faster drilling and require about 50% less Feed Force, which lowers operator strain and improves cycle times on maintenance and repair jobs. 135° point angle improves centring and performance in tough alloys A 135° point angle produces a flatter tip that reduces walking and improves centring when starting holes in harder materials such as Stainless Steel. A larger point angle can shorten the initial dwell time required to enter the workpiece and helps distribute cutting forces over a broader area, which decreases the risk of tip deformation. For users unfamiliar with point geometries, this means fewer retries and cleaner hole profiles in demanding applications. Built for professionals and maintenance teams who need controlled results The Profi Line Twist Drill is aimed at metalworkers, fitters, maintenance technicians and toolrooms that require dependable performance for repair and production tasks. Produced under the DIN 338 classification, short Twist Drills with cylindrical shanks may be manufactured ground or roll‑formed; this makes them compatible with a wide range of Drilling Machines and Hand Drills. The drill is particularly effective when precise control and repeatable hole quality matter most. Choose the MetavCUT Twist Drill from the Profi Line for demanding metal applications — for expert technical advice and support contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 60030-FDA Diameter: 3 mm Point angle: 135° Execution: left‑cutting Material: HSS‑G Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine / Hand Drill Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill (Spiralbohrer) used for? The MetavCUT Twist Drill is primarily applied to machining high‑strength materials and larger hole diameters. This Twist Drill design is well suited for alloyed and unalloyed Steel, Cast Steel, Gusseisen and similar materials; its shape is relatively easy to regrind and withstands substantial mechanical loads. Which three drill types exist? Typical drill categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drill group and is optimised for use on metalwork rather than masonry or timber. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip, which significantly lowers friction and therefore reduces the required feed forces. For the MetavCUT Twist Drill this improves centring and cutting efficiency so the tip stays better aligned in the workpiece. Can the MetavCUT Twist Drill be used to drill wood? A Metal drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish will be inferior compared with purpose‑made wood drills. Metal drills are easier to resharpen and have a lower self‑feed tendency, which can be an advantage for controlled hole work in softer materials. For which drilling depths is the Twist Drill most commonly used? A solid‑bore hole is typically produced with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool in metalworking operations. Is HSS better than HSSE? The widespread assumption that HSSE steels are always superior to standard HSS is not universally correct. When choosing between HSS and HSSE for the MetavCUT Twist Drill, evaluate whether the specific work conditions justify the higher cost of HSSE.

Der Spiralbohrer überzeugt durch seine Kombination aus schneller Spanabfuhr und hoher Anbohrstabilität; die HSS‑G-Ausführung und der 135° Spitzenwinkel reduzieren Anpresskraft und ermöglichen effiziente, gratfreie Bohrungen in Stahl und Gusseisen. Nutzen Sie die Präzision und Robustheit für produktive Metallbearbeitung und bestellen Sie direkt über Metav oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer (HSS‑G) von MetavCUT Der Spiralbohrer ist ein geschliffener HSS‑G Kurzspiralbohrer nach DIN 338 für präzise Metallbohrungen an Handbohrmaschinen und stationären Werkzeugmaschinen. HSS‑G für hohe Verschleißfestigkeit 135° Spitzenwinkel für härtere Werkstoffe Bis zu 40 % schnellere Bohrleistung Geeignet für Handbohrmaschine und stationäre Maschinen Norm DIN 338, kurze Spiralbohrer Schnelleres Bohren mit weniger Anpresskraft für effiziente Abläufe Dank der speziell geschliffenen Schneide ermöglicht der Bohrer einen deutlich schnelleren Bohrfortschritt bei reduziertem Kraftaufwand. Dieses Merkmal sorgt für geringere Ermüdung der Maschine und längere Standzeiten der Werkzeuge, was die Effizienz in Werkstatt und Produktion steigert. Anwender profitieren von saubereren Lochrändern und kürzeren Bearbeitungszeiten bei dünnen bis mittleren Blechen und Profilen. Präzision beim Anbohren und saubere Lochränder für hochwertige Ergebnisse Die W‑Spitze und der definierte Spitzenwinkel reduzieren das Wandern beim Anbohren und führen zu gratarmen Ergebnissen. Dadurch werden Nacharbeit und Entgraten minimiert, was besonders bei nachfolgenden Passungen und Montageprozessen Zeit spart. Diese Eigenschaft ist besonders vorteilhaft beim Bohren in legierten und unlegierten Stählen sowie in Gusseisen. Vielseitigkeit in der Materialbearbeitung und robustes Design Als Kurzspiralbohrer nach DIN 338 ist dieses Werkzeug für eine breite Palette von Materialien geeignet: Stahl, Gusseisen, Aluminium, Buntmetalle und technische Kunststoffe. Die HSS‑G-Legierung bietet eine gute Balance aus Zähigkeit und Verschleißfestigkeit, wodurch der Bohrer sowohl für einfache Werkstattaufgaben als auch für anspruchsvollere Montagearbeiten geeignet ist. Anwendungsempfehlung und Maschinenkompatibilität für sichere Prozesse Für handgeführte Akkubohrschrauber und stationäre Säulenbohrmaschinen liefert der Bohrer zuverlässige Ergebnisse. Bei einem Durchmesser von 3 mm empfiehlt sich bei Bedarf das Anpunkten mit einem Zentrierbohrer zur Erhöhung der Rundlaufgenauigkeit. So werden Verkantungen vermieden und die Standzeit weiter erhöht. Profitieren Sie von schnellerem Bohren mit dem HSS‑G Bohrer von MetavCUT – Beratung und Bestellung über Metav: info@metav-werkzeuge.com · Tel. +49 2822 7131930 · WhatsApp +49 170 2837271 Produkteigenschaften Artikelnummer: 55030-FDA Marke: MetavCUT Serie: Spezial Bezeichnung: Spiralbohrer Norm: DIN 338 Fakten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, geschliffen) Schaft Ausführung: mit W‑Spitze, ohne 3‑Kantschaft Anwendung: Bohrer für Metall Geeignet für: Handbohrmaschine, stationäre Maschinen FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑G und mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; bei rostfreiem Stahl kann die Standzeit geringer sein als bei speziellen HSS‑Co Typen. Welche Maschine passt am besten zu diesem Bohrer? Für den 3 mm Bohrer empfiehlt sich die Nutzung an einer Handbohrmaschine oder einer stationären Säulenbohrmaschine; die Ausführung entspricht DIN 338 für kurze Spiralbohrer. Wie erhöht man die Präzision beim Anbohren? Punktieren mit einem Zentrierbohrer und stabile Spannmittel reduzieren Wandern; der geschliffene Bohrerspitzenwinkel unterstützt ein sauberes Anbohren. Woraus besteht der Bohrer und was bedeutet das für die Anwendung? Der Bohrer besteht aus HSS‑G, was eine gute Kombination aus Zähigkeit und Verschleißfestigkeit bietet und ihn für Stahl, Gusseisen und Nichteisenmetalle geeignet macht. Welche SKU hat dieses Produkt für Nachbestellungen? Die Artikelnummer lautet 55030-FDA; Bestellungen und technische Rückfragen können über Metav oder direkt per E‑Mail an info@metav-werkzeuge.com gestellt werden.

Twist Drill (Spiralbohrer) – Left-Cutting HSS‑G, 4.5 mm, 135° (Profi Line) The Twist Drill (Spiralbohrer) by MetavCUT is a left‑cutting metal drill designed for drilling and extraction tasks in harder materials, best used with a Drilling Machine. High‑performance HSS‑G construction for durability Left‑cutting geometry for screw extraction and reverse drilling 135° tip angle for efficient work in hard metals Conforms to DIN 338 for short cylinder‑shank drills Part of the Profi Line for consistent industrial quality Maximum penetration power with reduced effort Built in HSS‑G, this Twist Drill combines hardness and toughness to withstand high stresses when drilling metal. The 4.5 mm diameter provides a versatile hole size for many engineering tasks, while the 135° tip angle reduces the tendency to wander on entry and shortens the initial bite time in tougher materials. This results in faster hole making with lower operator force, an advantage in production environments where repeatable accuracy matters. Effective extraction and specialised left‑cutting design The left‑cutting (linksschneidend) geometry is ground to cut correctly in counter‑clockwise rotation, making this Twist Drill particularly suitable for removing broken or seized screws and for operations where reverse rotation assists extraction. When used in a compatible Drilling Machine with left rotation, the design often allows the screw remnant to be turned out during drilling, improving salvage rates and reducing rework. Standardised quality for metalworking professionals Manufactured to DIN 338, the short cylinder‑shank design of this Twist Drill reflects industry standards for metalworking tools. Users benefit from a predictable, robust tool geometry that is suitable for alloyed and unalloyed steel, cast steel, spheroidal graphite cast iron, non‑ferrous metals and hard plastics. The Profi Line focus ensures consistent manufacturing tolerances and surface finish, helping maintain hole quality across batches. Who benefits most from this tool and how to get support Engineers, locksmiths and maintenance technicians who frequently encounter damaged fasteners or need reliable metal drilling in tight tolerances will value the specialised function of this left‑cutting Twist Drill. For complex applications or questions about machine compatibility, METAV Werkzeuge offers comprehensive, expert advice and can assist with selecting the correct drill geometry or recommending the appropriate machine settings. Strongly recommend MetavCUT left‑cutting Twist Drill for challenging metal and screw‑extraction tasks — for personalised technical advice contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill (Spiralbohrer) Brand/Manufacturer: MetavCUT SKU: 60045-FDA Diameter: 4.5 mm Tip Angle: 135° Execution: left‑cutting (linksschneidend) Material: HSS‑G Standard: DIN 338 Intended Machine: Drilling Machine (Handbohrmaschine) Application: Drills for metal Model Series: Profi Line Notes: Bei einem Spiralbohrer bedeutet „linksschneidend“, dass er so geschliffen ist, dass er im Linkslauf richtig schneidet; typische Anwendung: abgebrochene/festsitzende Schrauben ausbohren; geschliffener HSS Bohrer ermöglicht bis zu 40 % schnelleres Bohren und benötigt 50 % weniger Anpresskraft als herkömmliche HSS‑Bohrer (Herstellerinfos) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The MetavCUT Twist Drill is primarily used for drilling and extracting in high‑strength materials; its left‑cutting grind makes it especially effective when removing broken or seized screws and when working with alloyed steels and hard plastics. Which three drill types are commonly distinguished? In general classification, the main drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drill category designed for machining metals. For what situations is a Twist Drill applied? A Twist Drill such as the MetavCUT model is most often applied when machining high‑strength materials and for larger drill diameters; its form is easy to regrind and it endures higher loads while maintaining cutting performance. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of a Twist Drill, lowering friction and thus reducing the required feed force; this also improves centring of the drill tip in the workpiece for more accurate holes.

Twist Drill — HSS‑G Metal Twist Drill, Ø 4.5 mm, 135° Tip, DIN 338, W‑style Tip The Twist Drill for Drilling Machines is a high‑performance HSS‑G metal drill engineered for fast, low‑effort boring in alloyed and unalloyed steels and a wide range of non‑ferrous materials. Rapid HSS‑G cutting for faster drilling 135° tip for hardened steels Conforms to DIN 338 short twist drills Multi‑bevel W‑style tip for clean starts For use in Drilling Machines and hand drills Engineered for faster, lower‑effort metal drilling with measurable gains Designed for professional metalworking, the HSS‑G composition delivers high hardness and thermal stability while the specially ground geometry provides up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills. This means less operator fatigue and higher throughput on repetitive tasks. The HSS‑G material also permits straightforward regrinding, so the tool life and cost efficiency remain attractive for demanding workshop cycles. Secure centring and clean holes in tougher materials thanks to a 135° tip A 135° tip angle reduces the risk of walking on difficult surfaces and shortens the plunge phase when working with stainless and tempered steels. The precision ground W‑style cutting edge ensures a clean entry with minimal burr formation, producing holes with better edge quality and less need for rework. Conformance to DIN 338 classifies the tool as a short twist drill with cylindrical shank, making its performance predictable on stationary and portable drilling equipment. Machine‑compatible design and practical dimensions for everyday use With a nominal Diameter of 4.5 mm, Spiral Length of 47 mm and an Overall Length of 80 mm, this tool fits standard chucks and is suitable for both Drilling Machines and hand drills used in workshops and maintenance environments. The Shaft Execution is supplied with multi‑bevel cutting edge, without triangular shank, allowing secure clamping in cylindrical holders while delivering reliable chip removal. Such dimensions and form factor simplify inventory planning and ensure compatibility with common setups. Who benefits and how to maintain peak performance Maintenance is straightforward: the HSS‑G substrate can be re‑sharpened on standard tool grinders, restoring cutting geometry and extending service life. Target users include machinists, maintenance technicians and metal fabricators who need a resilient, easy‑handled drill for mixed materials like alloyed steel, cast iron, non‑ferrous metals and engineering plastics. Regular inspection of cutting edges and modest cooling during prolonged runs protect tool life and optimise drilling quality. Strongly recommended for professional metalworking: choose MetavCUT HSS‑G Twist Drills for reliable, faster holes — for technical advice or to confirm suitability, METAV Werkzeuge offers expert consultation via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Precise Technical Specifications for Reliable Workshop Use Designation: Twist Drill Brand: MetavCUT SKU: 55045-FDA Diameter: 4.5 mm Tip Angle: 135° Spiral Length: 47 mm Overall Length: 80 mm Material: HSS‑G Standard: DIN 338 Shaft Execution: with multi‑bevel cutting edge, without triangular shank Model Series: Spezial Application: Drills for metal For Drill: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for, and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily designed for metalworking; it is used for drilling alloyed and unalloyed steels, cast materials and many non‑ferrous metals as well as hard plastics. Its ground geometry and HSS‑G material allow efficient, precise holes in demanding applications where speed and edge quality are important. Which three drill types are commonly used? Commonly distinguished drill types are: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill family and is optimised for metalworking tasks. For what purpose are twist drills most often used? Twist Drills are mainly applied to the machining of high‑strength materials and larger diameters. Their shape allows relatively simple regrinding and they withstand greater loads, which makes them the standard choice for through‑hole drilling in engineering applications. Why are twist drills pointed (ground to a tip)? Pointing a Twist Drill reduces the cross‑cut at the tip, lowering friction and thus requiring smaller feed forces; this improves centring and makes hole starts cleaner. The pointed geometry also helps to guide the drill precisely into the workpiece, reducing walking and burr formation. If you are unsure whether this tool matches your application or need further technical data, METAV Werkzeuge provides comprehensive and competent advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 or WhatsApp +49 170 2837271

Kombination aus hoher Standzeit, linksschneidender Ausführung und 135° Spitzenwinkel sorgt für effizientes und kontrolliertes Bohren in Metall; Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT Profi Line (linksschneidend, HSS‑G) Spiralbohrer von MetavCUT Profi Line für präzise Metallbearbeitung mit linksschneidender Ausführung und 135° Spitzenwinkel. HSS-G Material für hohe Standzeit Linksschneidende Ausführung für Schraubenreste Spitze 135° für härtetaugliches Bohren Geeignet für Handbohrmaschine und Stationärbetrieb Norm DIN 338 kurze Spiralbohrer Langlebigkeit durch hochwertiges Material und smarter Geometrie Der HSS-G Kurzspiralbohrer vereint verschleißfestes Material mit optimierter Schneidengeometrie, sodass die Standzeit deutlich zunimmt. Durch den Einsatz von Schnellarbeitsstahl verbleiben Schnittkante und Schneidenlänge länger intakt, was weniger Werkzeugwechsel und höhere Produktivität bedeutet. Für Anwender heißt das: weniger Stillstandzeit und planbare Arbeitsabläufe bei der Metallbearbeitung. Linksschneidende Ausführung als Lösung für fest sitzende Schrauben Die linksschneidende Schleifung ermöglicht gezielte Eingriffe bei abgebrochenen oder festsitzenden Schrauben, da der Bohrer beim Linkslauf den Schraubenrest oft mit herausdreht. In Kombination mit einer Bohrmaschine mit Linkslauf reduziert diese Technik das Risiko von weiteren Beschädigungen am Werkstück und vereinfacht Reparaturarbeiten. Anwender profitieren von schnellerer Bearbeitung und geringerem Kraftaufwand. Präzision und Einsatzbereiche für professionelle Werkstätten Mit einem Spitzenwinkel von 135° ist das Werkzeug speziell für härtere Werkstoffe ausgelegt und dringt sauberer in Edelstahl, legierten Stahl und Gusseisen ein. Die Ausführung nach DIN 338 bestätigt die Einordnung als kurzer Spiralbohrer mit Zylinderschaft, ideal für stationäre Maschinen und Handmaschinen gleichermaßen. Dadurch eignet sich der Kurzspiralbohrer für Montage, Instandhaltung und präzise Werkstattarbeiten. Praxisnahe Bedienungshinweise für sichere Ergebnisse Für saubere Bohrbilder empfiehlt sich ein Anbohren mit Zentrierbohrer bei hoher Präzision sowie die Nutzung geeigneter Kühlung bei zähen Materialien. Die linksschneidende Geometrie verlangt nicht nach speziellen Drehzahlen, wohl aber nach kontrolliertem Vorschub; so werden Bruchrisiken minimiert. Durch richtige Anwendung lassen sich sowohl Zeitaufwand als auch Werkzeugkosten nachhaltig reduzieren. Empfehlung: Setzen Sie auf die MetavCUT Profi Line mit linksschneidendem HSS‑G Bohrer für kompromisslose Metallbearbeitung; bei technischen Fragen erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 60040-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Ausführung: linksschneidend Daten Durchmesser: 4 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Für Bohrmaschine: Handbohrmaschine und stationärer Einsatz Linksschneidend: geeignet zum Ausdrehen von Schraubenresten, reduziert Anpresskraft FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer Profi Line (SKU 60040-FDA) ist ausgelegt für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff; der 135° Spitzenwinkel verbessert die Anbohrfähigkeit in harten Werkstoffen. Brauche ich eine spezielle Bohrmaschine für die linksschneidende Ausführung? Für die optimale Nutzung der linksschneidenden Funktion ist eine Bohrmaschine mit Linkslauf erforderlich; ohne Linkslauf bleibt die normale Schneidwirkung des MetavCUT Spiralbohrers aus. Wie reduziert die linksschneidende Geometrie den Kraftaufwand? Durch die linksschneidende Schleifung arbeitet der HSS‑G Bohrer effizienter, wodurch bis zu 50 % weniger Anpresskraft benötigt werden kann und die Bohrgeschwindigkeit im Praxisvergleich um bis zu 40 % steigt. Ist der Bohrer für Handgebrauch geeignet? Ja, der Spiralbohrer aus der Profi Line ist für Handbohrmaschine und stationären Betrieb vorgesehen und eignet sich für Montage und Werkstattarbeiten. Welche Norm gilt für diesen Bohrer und was bedeutet sie? Die Einhaltung von DIN 338 bestätigt, dass es sich um einen kurzen Spiralbohrer mit Zylinderschaft handelt; diese Norm regelt Abmessung, Geometrie und Fertigungsarten für präzise und standardisierte Werkzeuge.

Twist Drill — 4 mm HSS‑G, 135° Tip, DIN 338, Spezial Series The Twist Drill is a precision metal‑drilling bit for Drilling Machines, engineered for fast, burr‑free holes in alloyed and unalloyed steels as well as non‑ferrous metals. Up to 40% faster drilling performance Reduced feed force by 50% for easier machining 135° tip for hard materials and stainless steel HSS‑G material for increased wear resistance Multi‑bevel cutting edge, cylindrical shank design Faster, more efficient metal drilling for workshops and industry The specially ground HSS‑G geometry of this Twist Drill delivers significantly improved cutting action: users benefit from up to 40% faster drilling and 50% less feed force compared with conventional HSS bits. This translates into shorter cycle times and reduced operator fatigue when working on tougher materials. The result is consistent, burr‑reduced holes and fewer rework steps, which increases productivity in production workshops and maintenance shops alike. Reliable centring and clean entry for hard materials A 135° tip angle gives the Twist Drill better centring and a gentler entry into harder materials such as stainless steel, reducing the tendency to wander and lowering burr formation at the hole edge. With a Spiral Length of 43 mm and an Overall Length of 75 mm, the geometry supports stable chip evacuation and controlled drilling depth on typical metalworking tasks. Proper tip geometry means cleaner holes with less need for subsequent deburring. Conforms to DIN 338 for short cylinder‑shank twist drills Designed and classified according to DIN 338, this short Twist Drill with cylindrical shank is suitable for stationary and portable Drilling Machines. The multi‑bevel cutting edge (with W‑point, without triangular shank) improves cutting performance and lifetime, especially when machining Cast Steel, Gusseisen, Sintered Iron, Tempered Casts, Aluminium and many engineering plastics. The standardized design ensures interchangeability and reliable performance in production environments. Ideal users, applications and practical handling tips This Twist Drill is aimed at professional machinists, toolrooms and industrial maintenance teams who require repeatable quality in metal drilling. For best results use appropriate cutting speeds and coolant for the material, clamp the workpiece securely, and match the drill speed to the material hardness. If unsure about speeds, coolant type or suitability for a specific application, METAV Werkzeuge offers competent technical advice and support to help select the right tool and parameters. We recommend the MetavCUT Twist Drill for demanding metalworking applications — for personalised technical advice and ordering assistance contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 55040-FDA Diameter: 4 mm Tip angle: 135° Spiral length: 43 mm Overall length: 75 mm Material: HSS‑G Shank: with multi‑bevel cutting edge, without triangular shank Model series: Spezial Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials are suitable? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger hole diameters; it performs well in alloyed and unalloyed steel, cast materials, non‑ferrous metals and certain plastics. Its ground geometry is easy to resharpen and designed to withstand higher loads during drilling. Which three drill types are commonly distinguished? Common drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, which lowers friction and requires less feed force; as a result the MetavCUT Twist Drill centres more reliably and produces cleaner hole entries with reduced burr formation. Can a metal drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and surface finish are typically inferior to a dedicated wood drill. Metal drills are easier to resharpen and have less self‑pulling action compared with specialised wood bits. Are you not sure whether this Twist Drill meets your exact requirements or do you need additional technical specifications? METAV Werkzeuge provides comprehensive and expert consultation — feel free to contact us by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271.

Twist Drill – Twist Drill for Drilling Machine, 5.5 mm, 135°, left cutting, HSS-G, DIN 338 (Profi Line by MetavCUT) The Twist Drill is a left-cutting HSS-G drill for metalworking, designed for Drilling Machine use and optimised for extracting broken screws and drilling in hard steels. Left-cutting geometry for screw extraction 5.5 mm Diameter, 135° Point Angle HSS-G Material for high wear resistance Conforms to DIN 338 for short shank drills Optimised for alloyed and unalloyed Steel Faster, more controlled metal drilling with measurable gains The Profi Line bit delivers Precision and efficiency: its left-cutting grind reduces the need for high feed force and, when used with a machine capable of reverse rotation, helps to extract broken screws while drilling. Manufactured from HSS-G, the tool offers improved wear resistance and effective heat tolerance during prolonged metalworking. With a 135° Point Angle and a 5.5 mm Diameter, the geometry is optimised for tougher materials and shorter penetration times without sacrificing centring behaviour. Specialised function: why left-cutting makes a difference Left-cutting geometry is not merely a novelty; it is a practical solution for specific workshop challenges. In reverse rotation the cutting lips pull fragments outward, which makes the bit particularly suitable for removing seized or broken fasteners as well as for sensitive reworking tasks. This characteristic, combined with the short-shank design conforming to DIN 338, turns the tool into a reliable choice where conventional bits struggle to start or hold in hardened surfaces. Built for metal: materials, application and working conditions Made of HSS-G, the bit is intended primarily for demanding metal applications such as alloyed and unalloyed Steel, Cast Steel and Non-Ferrous Metals. The robust Material composition ensures dimensional stability under thermal stress and allows the bit to be re-sharpened when required. For users who process tougher substrates, the 135° Point Angle improves initial contact and reduces walking, which is beneficial when accuracy and clean entry holes are required. Who benefits from this tool and how to integrate it into workflows Workshops, maintenance crews and machine shops that face occasional screw extractions or frequent drilling in hard metals will find this Twist Drill an effective addition. The short shank format suits both stationary and portable Drilling Machines while its left-hand grind provides an operational advantage in repair and disassembly tasks. Pairing the bit with the correct machine settings—moderate spindle speed and controlled feed—maximises life span and hole quality. Standards and quality assurance for professional results Compliance with DIN 338 signals that the bit meets the classification for short shank Twist Drills and is manufactured to established tolerances. This standardisation supports interchangeability and predictable performance in workshop settings. The MetavCUT manufacturing process and the Profi Line series focus on reproducible geometry and consistent cutting-edge quality, helping professionals maintain steady throughput and reduce rework. Strong recommendation from MetavCUT: choose the Profi Line Twist Drill for tasks requiring reliable screw extraction and robust metal drilling; for further product selection advice or technical clarification contact METAV Werkzeuge’s expert team at any time 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical Details Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 60055-FDA Diameter: 5.5 mm Point Angle: 135° Material: HSS-G Execution: left cutting For Drilling Machine: Handbohrmaschine / Drilling Machine Application: Drills for metal Model Series: Profi Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which tasks suit it best? The Twist Drill from MetavCUT (Profi Line) is used primarily for metalworking applications; due to its left-cutting grind it is especially effective when extracting broken screws and when drilling larger diameters in hard materials. Its design supports work in alloyed and unalloyed Steel and similar substrates. Which three drill types exist and how is this bit classified? The three common drill types are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill is classified as a Metal drill and conforms to DIN 338 for short shank metal Twist Drills. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and for larger hole diameters. Its shape is easy to regrind and withstands higher loads, making it suitable for drilling alloyed and unalloyed steels, cast steel and hard plastics. Why are Twist Drills pointed (re-sharpened)? Pointing reduces the cross cutting edge at the tip of the Twist Drill. By re-sharpening the tip, frictional forces are significantly decreased which lowers the required feed forces and improves centring of the tip in the workpiece.

Spiralbohrer HSS‑G »Spezial« von MetavCUT Spiralbohrer HSS‑G »Spezial« für präzise Metallbohrungen in Werkstatt und Montage HSS‑G geschliffen für schnelle Metallbohrungen 135° Spitzenwinkel für harte Werkstoffe 3‑Kantschaft für rutschfesten Einsatz in Akkumaschinen DIN 338 kurze Spiralbohrer mit Zylinderschaft Saubere, gratfreie Bohrungen durch präzise Spitze Schnelleres Bohren bei geringerer Anpresskraft für effizientere Abläufe Der geschliffene HSS‑G Kurzspiralbohrer wurde so ausgelegt, dass der Bohrfortschritt messbar erhöht wird. Dank präziser Schneidengeometrie kann die Bearbeitung bis zu 40 % schneller erfolgen und erfordert dabei etwa 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS‑Bohrern. Das spart Zeit bei wiederkehrenden Arbeiten und reduziert die Belastung für Maschine und Bediener. Saubere Anbohrung und gratfreie Lochränder für hochwertige Ergebnisse Eine speziell angeschliffene Spitze sorgt für sauberes Einstechen und reduziert den Grat an Lochrändern. Durch diese Geometrie entstehen saubere Bohrbilder, die Nachbearbeitung minimieren und die Montagegenauigkeit erhöhen. Anwender profitieren von gleichbleibender Qualität bei Stahl, Gusseisen und Nichteisenmetallen. Angepasst an harte Werkstoffe durch 135° Spitzenwinkel Der 135° Spitzenwinkel verbessert das Eindringverhalten in härtere Materialien und sorgt für ruhigeres Laufverhalten beim Anbohren. Bei Anwendungen in legierten Stählen oder temperhartem Material führt diese Spitze zu stabileren Bohrbedingungen und geringerer Wanderneigung, sofern die Maschine ausreichend Rundlaufgenauigkeit bietet. Sichere Kraftübertragung und einfache Handhabung mit 3‑Kantschaft Der 3‑Kantschaft gewährleistet eine formschlüssige Kraftübertragung in Akkubohrmaschinen und reduziert Schlupf im Spannfutter. Anwender in Werkstatt und Montage finden so eine zuverlässige Kombination aus einfacher Handhabung und hoher Übersetzungsstabilität, besonders bei schnell wechselnden Bohrpunkten. Normgerechte Ausführung und breite Materialverträglichkeit für verlässliche Planung Die Ausführung entspricht DIN 338 als kurzer Spiralbohrer mit Zylinderschaft und eignet sich für stationäre und handgeführte Maschinen. Der Spiralmeißel ist für unlegierte und legierte Stähle, Gussstoffe, Buntmetalle und Hartkunststoffe ausgelegt und bietet damit Planungs­sicherheit für gemischte Fertigungsaufgaben. Für welche Anwender sich der Bohrer besonders eignet Werkstätten, Montagebetriebe und feinmechanische Betriebe, die regelmäßig Metall bearbeiten, profitieren von diesem Kurzspiralbohrer. Er ist ideal für schnelle Reparaturarbeiten, Produktionsnacharbeit und anspruchsvolle Einzelfertigung, wo Zeitersparnis und saubere Bohrbilder gefragt sind. Die robuste Geometrie unterstützt zudem Anwender mit wechselnden Materialanforderungen. Empfehlung: Den HSS‑G Kurzspiralbohrer von MetavCUT für effiziente, gratfreie Metallbohrungen verwenden und bei Fragen METAV Werkzeuge unter info@metav-werkzeuge.com oder +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 55055-FDA Marke: MetavCUT Serie: Spezial Bezeichnung: Spiralbohrer Fakten: Durchmesser: 5,5 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Norm: DIN 338 Schaftausführung: mit W-Spitze und 3-Kantschaft Verpackungseinheit: 10 Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine FAQ Wie unterscheidet sich dieser Bohrer von Standard HSS‑Bohrern? Der HSS‑G Spiralbohrer von MetavCUT bietet eine geschliffene Schneidengeometrie, die schnellere Vorschübe und geringere Anpresskräfte ermöglicht; bei gezielten Einsätzen zeigt der Bohrer deutlich schnellere Bohrzyklen als ungeänderte Standardwerkzeuge. Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer mit 135° Spitzenwinkel ist für härtere Werkstoffe ausgelegt und eignet sich für viele Edelstahlgüten, solange Schnittgeschwindigkeit und Kühlschmierstoff entsprechend angepasst werden. Kann ich den Bohrer in einer Akkumaschine verwenden? Ja, dank des 3‑Kantschafts ist der Bohrer besonders rutschfest in Akkuspannfuttern und für Handbohrmaschinen vorgesehen; dennoch ist auf passend dimensionierte Drehzahl und ruhigen Vorschub zu achten. Ermöglicht der Bohrer gratfreie Löcher in Gusseisen und Buntmetallen? Durch die präzise Spitze erzielt der Spiralbohrer gratarme bis gratfreie Bohrungen in Gusseisen und Buntmetallen, wodurch die Nacharbeit in vielen Fällen entfällt. Welches Produktkennzeichen hat dieses Werkzeug für Nachbestellungen? Für Nachbestellungen und Identifikation verwenden Sie die Artikelnummer SKU 55055-FDA des Spiralbohrers von MetavCUT.

Kombinieren Sie die HSS-G-Materialqualität mit der linksschneidenden Ausführung für effizientes Ausbohren und deutlich geringere Anpresskraft; bei Fragen hilft die Beratung von Metav Werkzeuge gern weiter. Spiralbohrer von MetavCUT (Profi Line) Der Spiralbohrer ist ein linksschneidender HSS‑G Bohrer zur Bearbeitung von Metall und zum Ausbohren festsitzender Schrauben in Werkstatt und Industrie. HSS-G: hohe Schnittfestigkeit Linksschneidend für das Ausbohren festsitzender Schrauben DIN 338, kurze Spiralform für stationäre Maschinen 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Schnelleres Bohren mit weniger Kraftaufwand für effiziente Abläufe Der geschliffene HSS-G Bohrer arbeitet bis zu 40 % schneller und benötigt etwa 50 % weniger Anpresskraft als konventionelle HSS‑Werkzeuge. Diese Leistungssteigerung führt zu kürzeren Durchlaufzeiten in der Fertigung und reduziert die Ermüdung bei handgeführten Anwendungen. Für Anwender bedeutet das messbare Zeitersparnis und geringeren Kraftaufwand bei häufigen Reparatur- und Montagearbeiten. Präzise Eignung für legierte und unlegierte Stähle sowie Gusswerkstoffe Die Ausführung mit 135° Spitzenwinkel sorgt für besseren Anlauf in härteren Werkstoffen und verringert das Ausbrechen der Bohrung. Der Bohrer eignet sich für legierten Stahl, unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Durch die materialgerechte Spitzengeometrie wird beim Anbohren Stabilität geschaffen und die Werkzeugstandzeit erhöht. Passend für den Standard-Einsatz in Werkstatt und Montage Mit einem Durchmesser von 5 mm fällt das Werkzeug in den Standard‑Bereich (2,0 mm – 13,0 mm) und ist damit ideal für Werkstatt, Instandhaltung und DIY‑Projekte. Bei hoher Präzisionsanforderung empfiehlt sich vorheriges Anpunktieren mit einem Zentrierbohrer, um ein Wandern der Schneide zu vermeiden. Das sorgt für reproduzierbare Passungen bei Bohrungen in dünnen bis mittleren Blechen. Normgerechte Konstruktionsmerkmale für zuverlässigen Einsatz Die Herstellung nach DIN 338 steht für kurze Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl; die Profi Line Ausführung ist für den Einsatz an drehenden stationären und beweglichen Werkzeugmaschinen ausgelegt. Die linksschneidende Geometrie unterstützt speziell das Ausdrehen abgebrochener Schrauben, sofern die Bohrmaschine Linkslauf bietet. Empfehlen wir die Verwendung des linksschneidenden HSS‑G Spiralbohrers von MetavCUT aus der Profi Line für schnelle, sichere Schraubenentfernungen — bei Bedarf erreichen Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 60050-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Material: HSS-G Ausführung: linksschneidend Norm: DIN 338 Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Daten Durchmesser: 5 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten HSS-G: Schnellarbeitsstahl DIN 338: kurze Spiralbohrer mit Zylinderschaft Linksschneidend Profi Line Geeignet für Handbohrmaschine Anwendung: Bearbeitung von Metall FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Profi Line, SKU 60050-FDA) mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe und kann in gewissen Edelstählen eingesetzt werden; für sehr zähe oder gehärtete Stähle sollte die Schnittgeschwindigkeit angepasst werden. Wie funktioniert die linksschneidende Ausführung beim Entfernen abgebrochener Schrauben? Bei der linksschneidenden Geometrie dreht der Spiralbohrer im Linkslauf und kann dadurch in vielen Fällen den Schraubenrest mitdrehen; der MetavCUT Spiralbohrer ist genau für diese Anwendung konzipiert und erleichtert das kontrollierte Ausbohren. Welche Maschine ist für den Einsatz des Bohrers am besten geeignet? Der Spiralbohrer (Profi Line) ist für Handbohrmaschine und stationäre Maschinen ausgelegt; im Standard‑Bereich (2,0 mm–13,0 mm) liefert er sowohl im Werkstattbetrieb als auch an Säulenbohrmaschinen zuverlässige Ergebnisse. Was bedeutet die Norm DIN 338 für diesen Bohrer? DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft; der MetavCUT Spiralbohrer entspricht dieser Norm, was eine standardisierte Form und Kompatibilität mit üblichen Spannsystemen sicherstellt. Wie viele Werkstücke lassen sich mit einem Bohrer bearbeiten, bevor er nachgeschliffen werden muss? Die Standzeit hängt von Material, Schnittbedingungen und Kühlschmierstoff ab; der HSS‑G Werkstoff des MetavCUT Spiralbohrers bietet hohe Verschleißfestigkeit, wodurch die Einsatzdauer gegenüber einfachen HSS‑Bohrern deutlich verlängert wird.

Twist Drill — MetavCUT Spezial, HSS‑G, 5 mm, 135°, DIN 338, with W‑point and 3‑corner shank The Twist Drill from MetavCUT is a precision metal‑drilling bit engineered for Drilling Machines and hand drills, ideal for demanding applications in alloyed and unalloyed steels and non‑ferrous metals. Precision 5 mm diameter for clean holes 135° tip for hard materials like stainless steel HSS‑G material for extended tool life Triangular shank for secure grip in cordless drills Complies with DIN 338 standard Robust construction for consistent, long‑lasting performance The HSS‑G substrate and the specialised W‑point grinding deliver a combination of hardness and toughness that resists wear under continuous use. This geometry reduces lateral deflection and produces clean, burr‑free hole edges. For workshop and on‑site tasks, the bit's construction means fewer tool changes and more reliable repeatability when working with Steel, Cast Iron, Aluminium or Plastics. Faster drilling with lower operator effort Thanks to the precision grind, the bit allows up to 40% faster drilling rates and requires 50% less feed force compared with conventional HSS drills. This advantage reduces operator fatigue and increases throughput on repetitive tasks. The 135° tip angle is chosen to improve centring and reduce walking in harder materials, shortening pilot‑drilling time and improving positional accuracy. Designed for practical use and broad compatibility The triangular (3‑corner) shank provides positive engagement in chucks and quick‑change adapters, making the Rapid series especially suitable for Cordless Drills and portable Drilling Machines. The overall length of 86 mm with a spiral length of 52 mm balances depth capability and stiffness, allowing reliable use for holes in solid workpieces without excessive vibration. Clear standards and application guidance for safe operation Manufactured to DIN 338, this bit follows the classification for short twist drills with cylindrical shanks, ensuring dimensional consistency and interchangeability. The Rapid grind is optimised for metals: alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. For best results, select appropriate cutting speeds and coolant when machining tougher alloys to extend tool life. We recommend the MetavCUT Rapid Twist Drill for professional metalworking where precise, fast and repeatable holes are required — METAV Werkzeuge offers expert technical advice and support: info@metav-werkzeuge.com / +49 2822 7131930 / WhatsApp +49 170 2837271 Technical information Designation: Twist Drill, Spezial, Rapid grind Brand/Manufacturer: MetavCUT SKU: 55050-FDA Diameter: 5 mm Tip angle: 135° Spiral length: 52 mm Overall length: 86 mm Shank execution: with W‑point and 3‑corner shank (triangular shank) Material: HSS‑G Standard: DIN 338 Application: Drills for metal Suitable for machine: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill from MetavCUT is primarily used for machining high‑strength materials and larger hole diameters; its geometry is easy to regrind and endures substantial loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The main drill families are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for ferrous and non‑ferrous metals. Why are twist drills point‑ground? Point grinding reduces the chisel edge at the centre of the tip, which lowers friction and therefore the required feed force; a well‑ground tip also improves centring in the workpiece and results in cleaner starts. Can a Twist Drill be used for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is reduced and the hole finish is typically less clean than with specialised wood bits; metal drills are easier to regrind and have lower self‑feeding tendencies. For which drilling depths is the Twist Drill most common? A through‑hole in solid material is commonly executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is not universally correct; choose based on working conditions and whether the performance benefits justify the higher cost. MetavCUT Twist Drills in HSS‑G offer a balanced solution for many metalworking tasks.

Twist Drill — Left-cutting HSS-G, Ø 6.5 mm, 135° (DIN 338) by MetavCUT The Twist Drill is a left-cutting metal drill for Drilling Machines and Hand Drills, designed for efficient removal of broken screws and demanding work in alloyed and unalloyed steels. Left-cutting design for reverse rotation drilling Ø 6.5 mm for precise metal bores 135° tip angle for hard materials HSS-G material for long tool life Conforms to DIN 338 short twist drill standard Fast, low-effort drilling in tough materials Engineered for professional metalworking, the Twist Drill uses a left-cutting grind that enables drilling in reverse rotation to assist in removing broken or seized screws. The combination of HSS-G steel and a 135° tip angle reduces penetration resistance in hard materials such as stainless steel. As a result, users benefit from faster drilling and reduced operator strain while maintaining clean bore starts. Durable construction and standardised dimensions for reliable results Manufactured to DIN 338, this short twist drill features a cylindrical shank and robust geometry for consistent performance in stationary and portable machines. The HSS-G composition ensures wear resistance under frequent use and delivers predictable life cycles, making the tool a dependable choice where durability matters most. Optimised for metalworking and specialised reverse tasks The left-cutting execution is specifically suited to metal applications and tasks that profit from a counterclockwise cut, such as extracting screw remnants. For proper operation the Twist Drill should be used in a Drilling Machine or Hand Drill capable of left rotation. This specialised grind also improves centring and reduces lateral forces during initial engagement. Designed for professionals seeking speed and control Targeted at mechanics, maintenance technicians and metalworking professionals, the Profi Line twist drills combine precision Ø 6.5 mm sizing with a geometry tuned for throughput and stability. The tool allows quicker cycle times and steadier feed, which translates into higher workshop productivity without compromising hole quality. METAV Werkzeuge provides expert advice and application support for complex requirements. Strong recommendation: Choose the MetavCUT Profi Line Twist Drill for demanding metalwork and contact METAV Werkzeuge for personalised technical consultation — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60065-FDA Diameter: 6.5 mm Tip angle: 135° Execution: Left-cutting (linksschneidend) For machine: Drilling Machine / Hand Drill Material: HSS-G Standard: DIN 338 Series: Profi Line Application: Drills for metal Notes: Left-cutting design aids extraction of broken screws; left-cut HSS drill enables up to 40% faster drilling and requires up to 50% less feed force compared to conventional HSS drills; suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied in machining high-strength materials and larger bore diameters; its left-cutting grind is particularly effective for removing broken screws and for metalworking where reverse rotation provides advantages. The design is easy to resharpen and withstands higher loads. Which three drill types exist? Drill types are generally categorised as metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and differs from wood and masonry variants in geometry and cutting edge design.

Twist Drill Spezial — HSS‑G Metal Twist Drill, Ø 6.5 mm, 135° The Twist Drill Spezial is a HSS‑G metal twist drill designed for high‑speed drilling in alloyed and unalloyed steels and suitable for drilling machines and cordless hand drills. High‑performance HSS‑G for metalworking 135° point angle for harder materials Multi‑bevel W tip for clean hole entry Triangular shank ensures secure grip in chucks Conforms to DIN 338 for short HSS twist drills Maximise drilling speed with reduced feed effort The Twist Drill Spezial combines a ground HSS‑G body with an optimised cutting geometry that delivers up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS drills. This efficiency reduces operator fatigue on repetitive tasks and shortens cycle times in production. The specially designed tip supports quick penetration and stable cutting under higher loads, making it well suited for industrial metalworking applications. Precise design for cleaner holes and reliable clamping The multi‑bevel W tip and tailored flute geometry enable a clean start and produce holes with minimal burr formation. The drill’s triangular shank provides positive drive in standard chucks and quick‑change adapters, improving torque transmission for cordless and handheld use. The product follows DIN 338, a recognised standard for short spiral drills with cylindrical shank, which helps ensure reproducible dimensions and compatibility with machine tool holders. Robust material choice and target applications Manufactured from HSS‑G, this twist drill is optimised for drilling in alloyed and unalloyed Steel, Cast Iron, Aluminium, Non‑ferrous Metals and Hard Plastics. The 135° point angle reduces wandering on harder materials such as stainless steel and decreases required thrust, which supports cleaner, more accurate holes in demanding tasks. Typical users include workshop professionals, maintenance technicians and production operatives who require consistent results on metallic components. Practical handling, resharpening and working tips A larger point angle such as 135° lowers the quenching of the tip and shortens the initial entry time; it also improves centring when reaming is not desired. The W‑sharpened tip is relatively easy to resharpen on standard bench grinders without losing geometry, extending tool life and reducing consumable costs. For complex material mixes or special production conditions, METAV Werkzeuge provides expert technical advice and support to select the correct drill geometry and cutting parameters. Strong recommendation: Choose the MetavCUT Twist Drill Spezial for demanding metal drilling tasks — for tailored advice contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 55065-FDA Type / Model series: Spezial Diameter: 6.5 mm Spiral length: 63 mm Overall length: 101 mm Point angle: 135° Material: HSS‑G Shank execution: with multi‑bevel cutting edge and triangular shank Application: Drills for metal For: Drilling Machine / Hand drill Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill Spezial? The MetavCUT Twist Drill Spezial is primarily used for machining high‑strength materials and larger hole diameters; it is effective in alloyed and unalloyed Steel, Cast Iron, Non‑ferrous Metals, Aluminium and Hard Plastics. Its sharpened HSS‑G geometry allows faster drilling and lower feed forces while maintaining precise, burr‑reduced hole edges. Which three drill types exist? Three common drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Spezial belongs to the metal drill category and is engineered specifically for metalworking tasks.