Twist Drill Type N — 3.4 mm, 135° Point Angle, Extra Short, Bright Finished, HSS‑G (DIN 1897) by MetavCUT

The Twist Drill Type N is an extra‑short HSS‑G drill bit designed for Hand Drilling Machines, optimised for precise metalworking in tight spaces.

• Extra‑short design for greater stability
• 135° point angle for Harder Materials
• HSS‑G: up to 40% faster drilling
• Cylindrical shank fits standard chucks
• DIN 1897 compliant for consistent fit

Faster metal drilling with lower feed force

The Twist Drill delivers high efficiency when working with alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. Thanks to its HSS‑G material and the ground geometry, drilling can be performed up to 40% faster while requiring significantly less axial force. This means shorter cycle times and reduced operator fatigue when performing repetitive holes in demanding materials.

Extra‑short geometry increases stability and reduces breakage

The extra‑short execution offers a shorter overall length and reduced flute length compared with standard DIN 1897 bits, which improves torsional resistance and lowers the risk of breakage. This design is particularly advantageous for drilling in thin‑walled components or when working in confined setups where a long tool would be impractical. The compact geometry supports controlled chip evacuation and steadier hole starts.

135° point angle and Type N spiral explained

A 135° point angle is suited for harder workpiece materials because it reduces the tendency to wander and shortens the initial bite time. The Type N designation denotes the classic normal spiral for metalworking; it is designed for efficient chip removal in metal and stable machining of tougher alloys. For users less familiar with these terms: the point angle determines entry behaviour, and a larger angle generally improves centring and reduces required thrust for hard materials.

Universal shank and compatibility with hand drills

The cylindrical shank ensures compatibility with standard three‑jaw chucks, offering universal clamping for workshop and maintenance applications. As a result, the bit is well suited to Hand Drilling Machines and Angle Drills. Note that a smooth round shank can be more prone to slipping under very high torque compared with keyed or hex shanks; use appropriate chuck clamping to prevent slippage.

Who benefits from this short HSS metal drill

This short Twist Drill is aimed at technicians, mechanics and maintenance personnel who need reliable, fast holes in metal under space constraints. It is a practical choice for fabricators working with sheet metal, profile sections and machine repair tasks where a robust, short tool reduces vibration and breakage risk. For hobbyists, it offers easier handling when access to the workpiece is restricted.

MetavCUT recommends this Type N Twist Drill for precision metalworking in confined setups — for expert guidance and to confirm suitability contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com; ☎️ +49 2822 7131930; ✔️ WhatsApp +49 170 2837271

• Designation: Twist Drill
• Marke: MetavCUT
• SKU: 56034-FDA
• Diameter: 3.4 mm
• Point Angle: 135°
• Execution: Extra short
• Colour / Finish: Bright finished
• Material: HSS‑G
• Type: Type N
• Shaft Design: Cylindrical shank
• Overall Length: 46 mm
• Spiral Length / Flute Length: 16 mm
• Applicable Machine: Hand Drilling Machine (Drilling Machine)
• Application: Drills for metal
• Standard: DIN 1897
• Model Series: Standard Line
• Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What materials is the MetavCUT Twist Drill Type N best suited for?
The MetavCUT Twist Drill Type N is primarily intended for metalworking and performs well in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G composition and Type N spiral optimise chip removal and tool life in these materials.

Can the Twist Drill be used in an angle drill or only in straight hand drills?
The Twist Drill with a cylindrical shank is designed to be clamped in standard three‑jaw chucks, so it is compatible with both straight Hand Drilling Machines and many Angle Drills; ensure secure clamping to avoid slippage under higher torque.

For what is a Twist Drill used?
It is mainly applied to the machining of high‑strength workpieces and larger drill diameters. The Twist Drill geometry is easy to regrind and withstands higher loads.

Which three drill types exist?
There are Metal drills, Wood drills and Stone/Concrete drills.

Why are Twist Drills sharpened (pointed)?
Sharpening reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction and therefore requires lower feed forces while improving centring in the workpiece.

Can you drill wood with a Twist Drill?
A Metal drill can be used in wood, but guidance is poorer and the hole finish is less clean; however, such bits are easier to resharpen and show lower self‑feeding tendency.

For which drill depths is the Twist Drill most used?
A through hole in solid material is typically performed with a Twist Drill. For diameters up to 20 mm and drill depths up to 100 mm, the Twist Drill is the most frequently used tool.

Is HSS or HSSE better?
The common belief that HSSE steels are categorically superior to standard HSS is incorrect; consider your working conditions carefully to decide whether the higher cost of HSSE is justified.