HSS Twist Drill Bit DIN 338, Type N, short, roll-forged, black 118°

Twist Drill (Type N) — 0.3 mm diameter, 118° point angle, Short execution, Black, HSS, DIN 338, suitable for Drilling Machine, MetavCUT The Twist Drill (Type N) is a short HSS metal drill designed for precise, stable drilling in metal on a Drilling Machine, offering a 0.3 mm diameter and a 118° point angle for improved centring. Short design for high stability and precision HSS material for metal and alloyed steel drilling 118° point angle improves centring on curved surfaces Conforms to DIN 338 for short Twist Drills Precision and stability for demanding metal work The short construction of this Twist Drill delivers enhanced stability and reduced runout, which leads to more accurate holes in small diameters. Thanks to the compact geometry, axial and radial deflection are minimised, so shops and workshops achieve consistent hole quality. As a Type N tool, this drill is optimised for metal applications where controlled centring and repeatable results matter. Material advantages: why HSS matters for metal drilling Manufactured from HSS (High Speed Steel), the cutter provides a balanced combination of toughness and hardness suitable for alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics. The low-temperature rolling process used for these drills increases elasticity and reduces fracture risk, especially for diameters below 6 mm. This material choice supports longer tool life under standard workshop conditions. Geometry and application: the role of the 118° point and short flute A 118° point angle means easier penetration and improved self-centring on softer to medium-hard materials, while the shorter flute length reduces chatter and enhances rigidity. This geometry makes the bit particularly effective when used in a steady Drilling Machine setup and for tasks that demand precise start holes, such as model work, precision engineering or small-part fabrication. Who benefits and how to integrate it into the workflow Precision shops, prototyping facilities and maintenance departments that require dependable small-diameter metal holes will find this short Twist Drill well suited to their needs. Its robust design favours repeated use in production runs where stable clamping and correct feeds are applied. For operators unfamiliar with feed rates and coolant strategies, a brief setup check avoids common errors and secures consistent results. Strong recommendation: Select the MetavCUT Twist Drill Type N for precise, reliable metal drilling — for personalised technical advice and support contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 40003-FDA Diameter: 0.3 mm Point Angle: 118° Overall Length: 22 mm Spiral Length: 6 mm Execution: Short Type: Type N Material: HSS For Machine: Drilling Machine Colour: Black Standard: DIN 338 Applications: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this tool best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is ideal for alloyed and unalloyed steel, cast iron, non-ferrous metals and some plastics, offering reliable performance in typical metalworking tasks. Which three main drill types exist? The three principal drill types are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill is a Metal drill designed specifically for metalworking applications. Why are Twist Drills point-ground? The point grinding reduces the cross-cut at the tip of the Twist Drill, which significantly lowers friction and the required feed forces, while improving centring of the tip in the workpiece for more accurate starts. Can a metal Twist Drill be used to drill wood? A Metal Twist Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with a dedicated Wood drill; however, the Metal drill is easier to resharpen and shows less self-feed. For which drilling depths is the Twist Drill most commonly used? A hole drilled through solid stock is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool, as in many MetavCUT workshop applications. Is HSS better than HSSE? The common belief that HSSE steels are categorically superior to HSS is incorrect. Assess whether the working conditions justify the higher purchase cost of HSSE before deciding; for many standard metalworking tasks, HSS offers an excellent cost-performance ratio.

Twist Drill — Type N Short HSS, 0.4 mm, 118° Tip, Black, DIN 338 The Twist Drill Type N short HSS is a precision metal drilling bit designed for stable, accurate drilling in metalworking applications. Short HSS design for high stability DIN 338 short version for precision work 118° tip angle for reliable centering 0.4 mm diameter for fine, accurate holes Suitable for Drilling Machine use Highest precision for demanding metal holes This short HSS Twist Drill from MetavCUT delivers notable Precision when drilling small-diameter holes in metal. The reduced overhang inherent to the short execution reduces deflection and vibration, so every hole stays true to the intended position. For work requiring reproducible accuracy, the combination of HSS material and compact geometry ensures consistent cutting performance and longer tool life under standard metalworking conditions. Material choice and standardised design boost reliability Manufactured from HSS (High Speed Steel) and produced to DIN 338 specifications, the bit offers a reliable balance of hardness and toughness. The HSS material is well suited to alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, providing versatility for workshop tasks. Compliance with DIN 338 guarantees that dimensions and tolerances meet industry expectations for short twist drills with cylinder shank. Tip geometry optimised for centring and feed control With a 118° tip angle and the typical geometry of Type N, this drill promotes easier centring on curved or uneven surfaces while keeping feed forces moderate. The sharper point aids initial penetration and helps maintain position during the start of the cut, which is particularly useful on small diameters such as 0.4 mm. Reduced radial forces mean improved surface quality and less risk of walk-off on smooth metal faces. Short length for stability in confined or ergonomic setups The abbreviated overall length increases stiffness and is ideal when the drill projects only a short distance from the chuck, for example in handheld Drilling Machine operations or compact fixtures. This short format improves operator control and reduces chatter, translating directly into cleaner holes and fewer rejects. The compact design also simplifies handling during manual setups and high-speed machining in production. For whom this drill was developed and practical tips This Type N short twist drill is targeted at tradespeople, toolroom operators and metalworking hobbyists who require small, precise holes in metals. To extend service life, use appropriate cutting fluid, moderate feed rates for the small diameter and ensure secure clamping of the workpiece. If uncertainty exists regarding material compatibility or optimal machining parameters, METAV Werkzeuge provides expert guidance and application support. Strong recommendation: Choose the MetavCUT short HSS Twist Drill for precise, repeatable metal drilling — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40004-FDA Diameter: 0.4 mm Overall length: 22 mm Spiral length: 6 mm Tip angle: 118° Type: Type N Execution: short Colour: black Material: HSS Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N short HSS is primarily used for drilling metal; it is particularly suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many technical plastics. The short HSS design provides improved stability for small-diameter, high-precision holes in metalworking applications. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills. For metal tasks the MetavCUT Type N Twist Drill is the standard choice, while purpose-made bits are recommended for timber or masonry for best results.

Twist Drill — Type N short HSS drill, Ø 0.5 mm, 118° point angle, black, DIN 338 A Twist Drill Type N designed for precise Metal drilling with a short design for increased stability and centred starts. Short design for high stability HSS material suited for metal machining 118° point angle for precise centring Complies with DIN 338 for short drills Suitable for Drilling Machine and hand drills Exceptional precision and endurance for metalworking The Twist Drill in HSS is engineered for reliable performance when machining metal. Its short execution reduces overhang and minimises bending, which delivers a steadier cut and improved hole accuracy. The 118° point angle helps the tip centre quickly on flat or slightly curved surfaces, reducing walking and facilitating a clean entry. For tradespeople and workshops where repeatable, small-diameter holes are required, the compact geometry translates directly into less rework and a smoother workflow. Stable drilling for demanding applications Designed under DIN 338 as a short cylindrical-shank drill, this Type N tool offers high rigidity for medium-hard metalwork. The reduced free length gives better control when using hand-held or bench Drilling Machines, making it well suited to precise tasks such as panel work, instrument fabrication and small-part assembly. Because the bit is manufactured from High-Speed Steel, it balances toughness and wear resistance, so operators benefit from consistent performance across repeated holes without compromising bit life. Material choice and practical advantages explained High-Speed Steel (HSS) stands for cutting durability under elevated speeds and temperatures; it is particularly effective on alloyed and unalloyed steels, cast iron, non-ferrous metals and engineering plastics. The Type N fluting is the classic spiral for metal drilling and is easy to re-sharpen if required. The short geometry also improves chip evacuation in interrupted cuts and reduces the chance of tool chatter. For users who value serviceable tools, HSS presents an economical choice with clear reconditioning options and reliable everyday performance. Who benefits from this design Workshops, maintenance technicians and precision engineers who need fine-diameter holes will appreciate the control and repeatability this drill provides. The compact form factor is ideal where access is limited or where stability from a short protrusion is crucial. If tasks demand frequent small holes in metal components while keeping setup times low, this specialised bit delivers the necessary combination of accuracy and practical handling that speeds up production without sacrificing quality. Simple handling and compatibility tips To achieve the best results, clamp the workpiece securely and use appropriate coolant or cutting oil when drilling steels; this prolongs tool life and improves surface finish. The drill is compatible with standard chucks used on hand drills and bench Drilling Machines; the short shank reduces run-out and helps maintain concentricity. For customers less familiar with drill geometry, the Type N designation indicates a normal spiral profile tailored to metals rather than soft woods. Strongly recommended: choose the MetavCUT Twist Drill Type N for precise metal drilling — METAV Werkzeuge provides expert advice and support if you are unsure whether this tool fits your task; contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — WhatsApp enquiries welcome at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40005-FDA Diameter: 0.5 mm Point angle: 118° Spiral length: 6 mm Overall length: 22 mm Execution: short Type: Type N Material: HSS (High Speed Steel) Colour: black Application: Drill for Metal Standard: DIN 338 Suitable for: Drilling Machine (Hand Drill) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters in metalworking. This short HSS design is straightforward to re-sharpen and withstands significant loads, making it suitable for demanding metal-drilling tasks. Which three drill types exist? When selecting tools, consider the main categories: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill Type N falls into the Metal drills category and is optimised for steel and similar materials.

Twist Drill — Type N Short HSS Drill, Ø 0.6 mm, 118° Tip, Black, DIN 338 The Twist Drill Type N short HSS drill for metalworking, designed for stable, precise holes in steel and non-ferrous materials when used in a Drilling Machine. HSS Material for reliable metal drilling Short design (DIN 338) for high stability 118° Tip for improved centring on curved surfaces Type N Normal spiral for standard metalworking Black finish and 24 mm overall length Precision and material benefits for durable metal drilling Built from HSS (High Speed Steel), this short Twist Drill offers a resilient balance of hardness and toughness that reduces the risk of breakage, especially for small diameters. The HSS composition is particularly suitable for drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, making the tool a reliable choice for workshops and maintenance tasks. The short overall length increases rigidity and reduces vibration, resulting in cleaner holes and longer tool life. Stability and application in metalworking machines The DIN 338 short design paired with a Type N normal spiral makes this drill ideal for use in a Drilling Machine where precision matters. With a nominal Diameter of 0.6 mm, a Spiral Length of 7 mm and an Overall Length of 24 mm, the geometry minimises deflection and improves concentricity when clamped in the chuck. The 118° Tip provides easier centring on less rigid or slightly curved surfaces, while the short flute length gives enhanced control during feed. Who benefits from this specialised short drill Professionals, tool rooms and hobbyists who perform precision metal drilling will value the combination of short design and HSS material. The tool is suited for tasks requiring accurate hole positions and minimal runout, such as prototype work, instrument making and fine mechanical repairs. Its robustness under standard workshop conditions makes it a practical option for repetitive drilling where stability and repeatable results are required. Practical handling, sharpening and maintenance tips Correct use extends tool life: run the drill at appropriate speeds for the material, keep adequate cooling or lubrication, and avoid excessive feed that increases risk of breakage. The Type N normal spiral is straightforward to re-sharpen by experienced users; sharpening restores the cutting edges and maintains the intended 118° point geometry. For guidance on speeds, feeds or regrinding, METAV Werkzeuge offers expert advice to match the working conditions to the tool. Strongly recommended for precise metalwork: the MetavCUT Twist Drill Type N short HSS for stable, accurate drilling — for personalised technical support contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Telephone: +49 2822 7131930, or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40006-FDA Diameter: 0.6 mm Tip Angle: 118° Type: Type N Execution: short Colour: black Material: HSS Spiral Length: 7 mm Overall Length: 24 mm For Use In: Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill Type N short HSS is primarily applied to the machining of high-strength materials and larger hole diameters; its form allows relatively simple regrinding and it withstands greater loads, making it suitable for demanding metalworking tasks. Which three main drill types exist? The common categorisation lists metal drills, wood drills, and stone/concrete drills, which differ in flute geometry, tip design and material to suit each substrate. Why are Twist Drills pointed (reamed to a tip)? Pointing reduces the cross-edge at the tip of a Twist Drill, significantly lowering friction so that smaller feed forces are required; at the same time the sharpened tip improves the drill’s self-centring in the workpiece. Can the Twist Drill be used to drill wood? A metal drill can be used in wood, but the MetavCUT Twist Drill designed for metal will typically provide less guidance and a less clean finish; however, it is easier to regrind and exhibits lower self-feed compared with specialised wood bits. For which drilling depths is the Twist Drill most used? A through-hole in solid material is commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general assumption that HSSE steels are categorically superior to HSS is incorrect; selection should be based on working conditions and whether the higher acquisition cost of HSSE is justified by the application.

Twist Drill Type N — Ø 0.7 mm, 118°, Short, Black, HSS, DIN 338, MetavCUT The Twist Drill Type N is a short High Speed Steel drill designed for precision metalworking in drilling machines and hand drills. Short HSS design for increased stability Conforms to DIN 338 for consistent quality 118° point angle for reliable centring Suitable for drilling machines and hand drills Black finish improves visibility during machining Exceptional stability for precise metal holes Dank der kurzen Ausführung bietet dieser Twist Drill eine deutlich höhere Stabilität beim Arbeiten in Metall. Die reduzierte Auskraglänge minimiert Vibrationen und Verringerung von Abweichungen, sodass saubere, runde Bohrungen erzielt werden. Für Anwender bedeutet das weniger Nacharbeit und höhere Maßhaltigkeit bei jedem Bohrvorgang. Kurze Werkzeuge sind besonders vorteilhaft bei Präzisionsaufgaben und bei eingespannten Werkstücken, bei denen Verbiegen oder Flattern die Qualität beeinträchtigen könnte. HSS-Material: Elastizität und Bruchsicherheit bei Standardaufgaben Der Einsatz von HSS (High Speed Steel) macht den Bohrer elastisch und widerstandsfähig gegenüber Belastungen bei Standardaufgaben in Metall. Diese Legierung reduziert das Risiko von Bruch insbesondere bei kleinen Durchmessern und ist geeignet für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Für die Anwender heißt das: Längere Standzeiten und einfache Nachschleifbarkeit bei gleichbleibender Bohrleistung unter typischen Einsatzbedingungen. Normgerechte Fertigung nach DIN 338 für industrielle Verlässlichkeit Die Fertigung gemäß DIN 338 gewährleistet reproduzierbare Abmessungen und eine definierte Ausführung als kurzer Spiralbohrer mit Zylinderschaft. Diese Norm steht für industrielle Kompatibilität und erleichtert die Auswahl passender Werkzeuge für Produktionsprozesse. Anwender profitieren von vorhersehbaren Toleranzen und einer einfachen Integration in vorhandene Spannsysteme sowie von einer Auswahl an Oberflächenbehandlungen und Durchmessern, die den Anforderungen unterschiedlicher Einsatzfelder gerecht werden. Technische Spitzengeometrie: 118° für bessere Zentrierung Die gewählte Spitzengeometrie von 118° sorgt für ein gutes Eindringverhalten und erleichtert das Anbohren vor allem bei weniger harten Metallen. Ein spitzerer Winkel unterstützt die Zentrierung auf gewölbten Oberflächen, während er gleichzeitig moderate Randzonenbelastungen erzeugt. Für den Anwender bedeutet das ein zuverlässigeres Anlaufen des Bohrers und gleichmäßigere Bohrbilder bei Serien- oder Einzelteilen, ohne dass aufwendige Vorzentrierungen erforderlich sind. MetavCUT’s Twist Drill Type N empfiehlt sich für alle, die präzise Metallbohrungen benötigen — bei Unsicherheiten steht METAV Werkzeuge mit kompetenter Beratung zur Verfügung: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40007-FDA Diameter: 0.7 mm Spiral length: 9 mm Overall length: 28 mm Point angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Finish / Colour: black Application: Drills for metal Suitable for: Drilling Machine and Hand Drill Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N best used for? The Twist Drill Type N from MetavCUT is primarily intended for drilling metal; it excels in producing accurate holes in steel, cast iron and non-ferrous metals when used in drilling machines or handheld drills. Is this MetavCUT Twist Drill suitable for my drilling machine? Compatibility depends on the chuck and required shank dimensions; the MetavCUT Twist Drill Type N is designed for standard chucks and short overhang applications, and METAV Werkzeuge offers expert support if further technical details are needed. For what are Twist Drills used? Twist Drills are mainly applied when machining high-strength materials and for larger drill diameters; their form permits straightforward sharpening and maintains strength under higher loads. Which three drill types exist? The three main drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross-cut at the tip, lowering friction and required feed forces while improving the drill’s centring behaviour in the workpiece. Can you use a Twist Drill to drill wood? A metal Twist Drill can be used in wood, but guidance and surface quality are inferior compared with dedicated wood drills; however, metal drills are easier to resharpen and have less self-feed. At which drilling depths is the Twist Drill most commonly used? A solid through-hole is typically made with a Twist Drill; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm. What is better, HSS or HSSE? The general belief that HSSE is always superior to HSS is incorrect; choosing between HSS and HSSE should be based on actual operating conditions and whether the higher cost of HSSE is justified.

Spiralbohrer (Durchmesser 0,8 mm, Spitzenwinkel 118°, Typ N, Farbe schwarz, Kurz, Norm DIN 338, Material HSS) von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer des Typs N für präzise Metallbohrungen mit Handbohrmaschine. Spiralbohrer 0,8 mm nach DIN 338 HSS-Material für Stahl und NE-Metalle Kurze Ausführung für hohe Stabilität Spitzenwinkel 118° für einfache Zentrierung Geeignet für Handbohrmaschinen Präzise Metallbearbeitung dank HSS und Normgebung Der HSS-Werkstoff wurde entwickelt, um bei hohen Schnittgeschwindigkeiten zuverlässig zu arbeiten und bietet deshalb eine gute Kombination aus Zähigkeit und Verschleißfestigkeit. Der Einsatz der DIN 338-Norm garantiert standardisierte Abmessungen und eine kurze, robuste Bauform, die für stationäre wie mobile Anwendungen im Metallbereich entwickelt wurde. Durch den Bohrdurchmesser von 0,8 mm lassen sich feine Bohrbilder erzeugen, die besonders bei präzisen Montagen und Feinmechanik-Aufgaben relevant sind. Kurze Bauweise erhöht Stabilität und Bohrgenauigkeit Die kurze Ausführung reduziert die Auskraglänge und verringert damit die Neigung zum Verbiegen während des Bohrens. Mit einer Gesamtlänge von 30 mm bleibt der Bohrer besonders verwindungssteif; das Ergebnis ist eine höhere Stabilität und verbesserte Maßhaltigkeit bei Durchgängen in dünnwandigen Werkstücken oder bei punktgenauen Bohrungen. Anwender profitieren von weniger Schwingungen und gleichmäßigerem Spanabtrag. Vielseitiger Einsatz für Handbohrmaschinen und Metall Für den Einsatz in der Handbohrmaschine ist der kurze Spiralbohrer besonders gut geeignet, weil er einfache Handhabung mit hoher Präzision verbindet. Der Spitzenwinkel von 118° erleichtert die Zentrierung auf leicht gewölbten Oberflächen und sorgt für sauberen Anbohrbeginn. Dieser Bohrertyp eignet sich vornehmlich für legierte und unlegierte Stähle, Gusseisen sowie Nicht-Eisenmetalle und Kunststoffe. Pflege, Nachschliff und sichere Anwendung HSS-Bohrer lassen sich bei Verschleiß gut nachschleifen, wodurch die Lebensdauer verlängert werden kann; ein fachgerechter Nachschliff erhält Geometrie und Zentrierverhalten. Beim Einsatz empfiehlt sich eine angepasste Schnittgeschwindigkeit und geeignete Kühlschmierstoffe, um Überhitzung zu vermeiden. Durch die kurze Ausführung ist das Werkzeug einfacher zu führen, was das Risiko von Bruch verringert und die Arbeitssicherheit erhöht. Empfehlung: MetavCUT Spiralbohrer Typ N mit HSS-Material ist die erste Wahl für präzise Metallbohrungen in der Werkstatt und auf der Baustelle – bei Fragen zur Anwendung oder wenn ergänzende technische Daten benötigt werden, steht METAV Werkzeuge kompetent zur Seite: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40008-FDA Typ: Typ N Durchmesser: 0,8 mm Spitzenwinkel: 118° Ausführung: kurz Farbe: schwarz Material: HSS Norm: DIN 338 Gesamtlänge: 30 mm Spirallänge: 10 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man Spiralbohrer? Der Spiralbohrer von MetavCUT (Typ N) wird vor allem bei der Bearbeitung hochfester Werkstoffe und größeren Bohrdurchmessern eingesetzt. Diese Form lässt sich leicht nachschleifen und hält auch stärkeren Belastungen stand. Welche 3 Bohrertypen gibt es? Für den Einsatzbereich werden allgemein drei grundlegende Bohrertypen unterschieden: Metallbohrer, Holzbohrer und Stein-/Betonbohrer. Warum werden Spiralbohrer ausgespitzt? Die Ausspitzung reduziert die Querschneide an der Spitze des Spiralbohrers. Dadurch verringern sich die Reibkräfte deutlich, es sind geringere Vorschubkräfte nötig, und die Spitze wird beim Anbohren besser im Werkstück zentriert. Kann man mit Spiralbohrer Holz Bohren? MetavCUT Metallbohrer lassen sich auch in Holz verwenden. Die Führung ist jedoch schlechter und das Bohrbild nicht so sauber wie bei speziellen Holzbohrern. Vorteilhaft ist das einfache Nachschleifen und der geringere Selbsteinzug. Bei welchen Bohrtiefen ist der Spiralbohrer das meist verwendete Werkzeug? Eine Bohrung ins Volle wird häufig mit einem Spiralbohrer ausgeführt. Bis zu einem Durchmesser von 20 mm und einer Bohrtiefe von etwa 100 mm ist der Spiralbohrer das am meisten verwendete Werkzeug. Was ist besser, HSS oder HSSE? Die pauschale Annahme, HSSE-Stähle seien HSS grundsätzlich überlegen, ist nicht korrekt. Bei der Auswahl sollte abgewogen werden, ob die konkreten Arbeitsbedingungen den höheren Anschaffungspreis von HSSE rechtfertigen.

Twist Drill Type N — 0.9 mm | 118° Tip Angle | HSS | Short | Black | DIN 338 (MetavCUT) The Twist Drill Type N by MetavCUT is a precision metalworking drill bit designed for accurate, low-deflection drilling in metal using hand drills or drilling machines. Twist Drill Type N, 0.9 mm Diameter Short HSS design for greater Stability Conforms to DIN 338 for short spiral drills 118° Tip Angle for reliable centring on curved surfaces Higher precision through short HSS construction The combination of HSS Material and a Short Design reduces vibration and bending during machining, resulting in consistently round holes and extended tool life. For jobs that demand accuracy—such as fitting dowels, producing locating holes or small-bore metalwork—the reduced free length improves Stability and prevents chatter. The 0.9 mm Diameter makes this bit suitable for fine, precise work in both alloyed and unalloyed steels, cast iron and non‑ferrous Metals while remaining easy to regrind if necessary. Reliable standardisation and machine compatibility Manufactured to DIN 338, this twist drill provides uniform geometry and repeatable performance across batches. The standard specifies short spiral drills with cylindrical shanks, which are especially suited to operation on both stationary and portable machines. As a result, workshops benefit from predictable behaviour and simplified tool management. The Type N spiral geometry is the classic choice for general metal drilling and performs stably in conventional Drilling Machines and Hand Drills without the need for specialised holders. Practical advantages for metalworking professionals For professional users, the bit’s construction translates into two clear benefits: easier centring on the workpiece and lower risk of breakage at small diameters. The 118° Tip Angle promotes self-centring on softer faces while the HSS composition ensures elasticity that reduces fracture risk for holes below 6 mm. This makes the tool appropriate for precise tasks in maintenance, prototyping and small-series production where repeatability and handling safety are priorities. Simple explanation of tips and maintenance A smaller Tip Angle like 118° decreases the effective cross‑cut at the point and improves starting behaviour on curved or non-flat surfaces, reducing the tendency to wander. Occasional resharpening restores geometry; HSS material allows low-temperature manufacturing and efficient regrinding compared with some coated or high-alloy alternatives. Keep cutting speeds moderate and use appropriate lubrication for long tool life when drilling harder materials. For precision metalwork choose the MetavCUT Twist Drill Type N — expert technical advice and order support are available from METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40009-FDA Type: Type N Diameter: 0.9 mm Spiral Length: 11 mm Overall Length: 32 mm Execution: short Material: HSS Standard: DIN 338 Tip Angle: 118° Colour: black For Use With: Drilling Machine / Hand Drill Application: Drills for Metal Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters; it is a common choice when working with Metals because its form is easy to regrind and it withstands greater mechanical loads. Which three drill types exist? In general tool classification there are Metal drill bits, Wood drill bits and Masonry/Concrete drill bits; the MetavCUT Twist Drill (Type N) belongs to the Metal drill bit group and is optimised for metalworking tasks. Why are twist drills pointed? The pointing of a Twist Drill reduces the cross‑cut at the tip, which significantly lowers friction and therefore the required feed forces; this geometry also improves centring of the tip in the Workpiece during the first contact. Can the MetavCUT Twist Drill be used in wood? A Metal drill bit such as the MetavCUT Twist Drill can be used in Wood, but guidance is reduced and the hole finish will usually be less clean; these bits are easier to resharpen and tend to have less self‑feeding action compared with dedicated wood drill bits. For which drilling depths is the Twist Drill most commonly used? A through‑hole or a hole in the solid up to typical diameters of 20 mm and depths up to around 100 mm is commonly executed with Spiral or Twist Drills; for the MetavCUT short design, the bit is optimised for precise, shallow to moderate depths where stability matters most. What is better, HSS or HSSE? The common view that HSSE steels are always superior to standard HSS is incorrect; when choosing between HSS and HSSE for a MetavCUT Twist Drill, assess whether the specific working conditions justify the higher investment in HSSE.

Twist Drill — Type N, Diameter 1.1 mm, 118° Tip, Short, Black, HSS, DIN 338 (MetavCUT) A Twist Drill Type N short HSS bit for precise metal drilling in Drilling Machines. Short design for high stability Ideal for Metal Drilling with Type N geometry 118° Tip Angle for better centring on surfaces HSS construction for toughness and re‑sharpening Conforms to DIN 338 short twist drill standard Precision and Stability for Tough Metal Tasks The short design of this Twist Drill ensures markedly reduced deflection and higher concentricity during drilling operations, which is essential when working with metallic components that demand tight tolerances. Thanks to the HSS material and the limited overhang, the tool resists bending and provides a more consistent Hole Quality. This stability means fewer rejects and less rework when producing precision Parts or preparing fastener holes in thin or thick Metal sheets. Engineered Tip Geometry for Reliable Starts A 118° Tip Angle combines good penetration with dependable centring on slightly curved or uneven surfaces. The moderated Tip Geometry reduces walking at the start of the cut and allows a controlled entry into materials such as unalloyed or alloyed Steel and Cast Iron. For users unfamiliar with angles: a smaller tip angle aids initial positioning, while a larger angle shortens the initial contact time; the 118° compromise is therefore widely used for versatile Metalworking applications. Machine Compatibility and Practical Application Designed for use in a Drilling Machine, this short Type N bit is well suited to tasks where tool rigidity influences result quality. With a Diameter of 1.1 mm, a Spiral Length of 14 mm and an Overall Length of 36 mm, the bit provides a balanced cutting zone and chip evacuation for small to medium depth holes. The normal-helix geometry supports chip removal in many ferrous and non-ferrous Metals while allowing straightforward re‑sharpening when necessary. Durability, Standards and Who Benefits Most Manufactured from HSS according to DIN 338 for short twist drills, this tool offers a reliable combination of toughness and heat resistance for repeated drilling cycles. The Type N geometry targets Metalworkers, tool rooms and workshops that require a versatile, easy-to-maintain drill for production and repair tasks. For professionals and advanced hobbyists alike, the short format brings improved control and a longer service life under typical workshop conditions. MetavCUT’s Twist Drill Type N is recommended for precision metalworking; for technical guidance or to confirm suitability contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 40011-FDA Diameter: 1.1 mm Tip Angle: 118° Spiral Length: 14 mm Overall Length: 36 mm Material: HSS Type: Type N Execution: Short Colour: Black For Drill Machine: Drilling Machine Application: Drills for Metal Standard: DIN 338 Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials can it handle? The Twist Drill from MetavCUT (Type N) is primarily intended for drilling Metal; its HSS composition and normal-helix geometry make it suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and selected Plastics, providing robust performance in workshop and production environments. Which three drill types are commonly distinguished? Commonly, drills are categorised as Metal Drill, Wood Drill and Masonry/Concrete Drill, and the Twist Drill (MetavCUT, Type N) belongs to the Metal Drill group designed for ferrous and non‑ferrous materials. What is a Twist Drill mainly used for? A Twist Drill is mainly applied when machining high‑strength materials and for larger hole diameters; its shape allows straightforward re‑grinding and it withstands higher loads, making it the go‑to tool for many metalworking tasks. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, significantly lowering friction and feed forces; as a result the Twist Drill centres more reliably and requires less operator input during penetration.

Twist Drill (Type N) — 1.25 mm, HSS, Short, 118° Point, Black, DIN 338 The Twist Drill Type N is a short HSS metal‑drilling bit designed for precise work in drilling machines and hand drills. Short, stable design for precise metal drilling High‑performance HSS for standard metal applications Conforms to DIN 338 for consistent dimensions 118° tip angle for reliable centring on curved surfaces Suitable for use in drilling machines and hand drills Built for accurate metal drilling with consistent geometry The HSS construction gives this short drill bit reliable toughness and good elasticity during cutting, making it well suited to the typical demands of metalworking. With a 1.25 mm diameter and DIN 338 specification, the tool provides repeatable geometry for fine holes, while the Type N spiral design targets conventional metal applications. Users benefit from stable hole quality and predictable performance when machining unalloyed and alloyed steels, cast iron, non‑ferrous metals and plastics. Short length improves rigidity and precision A reduced overall length reduces deflection under load and increases stability in handheld and machine setups. The short execution limits overhang and therefore vibration, which results in straighter, more accurate holes and longer usable life of the cutting edge. For tasks that require tight tolerances or where access is limited, this compact geometry is a practical advantage because it keeps the drill centred and reduces the risk of breakage during plunge operations. Tip geometry and the right spiral for common workshop tasks The 118° point angle eases centring and starts cleanly on slightly curved or uneven surfaces. The classic Type N spiral is a general‑purpose metal flute geometry that balances chip evacuation and cutting action for standard alloys and steels. For customers unfamiliar with these terms: the point angle affects how the bit enters material, while the spiral type describes flute shape and chip removal behaviour — both influence feed forces and hole finish. Who benefits and typical workshop uses This bit is ideal for technicians, toolroom staff and hobbyists who require a reliable solution for drilling metal with drilling machines or hand drills. The MetavCUT branded bit is targeted at users needing repeatable hole quality in production or repair settings. Its short form favors precision over reach, making it suitable for jig work, panel fabrication and maintenance tasks where stable guidance and ease of resharpening are priorities. For precise metalworking choose the MetavCUT Twist Drill Type N with HSS construction — for specialist advice or to ensure compatibility with your machines contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400125-FDA Diameter: 1.25 mm Point angle: 118° Type: Type N Material: HSS Execution: short Standard: DIN 338 Total length: 38 mm Colour: black Suitable for: Drilling Machine Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications suit the MetavCUT Twist Drill Type N best? The MetavCUT Twist Drill Type N is primarily intended for drilling metal components; it is especially useful for machining steel, cast iron and non‑ferrous alloys in both workshop and maintenance environments where short, stable drill geometry is required. How should the MetavCUT Twist Drill Type N be used in a drilling machine? When using the MetavCUT Twist Drill Type N in a drilling machine, secure the workpiece, use appropriate cutting fluid for metal, and apply steady feed to avoid chattering; the short HSS geometry tolerates moderate feeds and benefits from good clamping and stable fixturing. What is a Twist Drill used for? A Twist Drill is mainly used for machining high‑strength materials and larger drill diameters. This form is easy to regrind and withstands higher loads, making it suitable for demanding metal‑working tasks. Which three drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills.

Spiralbohrer – Typ N, HSS, 1,2 mm, 118°, kurz, schwarz, DIN 338 Der Spiralbohrer Typ N von MetavCUT ist ein kurzer HSS-Bohrer mit 1,2 mm Durchmesser, 118° Spitzenwinkel und DIN 338‑Norm, ideal für präzise Metallbohrungen mit Handbohrmaschine. Kurze Ausführung für hohe Stabilität und Präzision HSS-Material für Metallbearbeitung und Elastizität DIN 338 konform für kurze Spiralbohrer 118° Spitzenwinkel sorgt für zentriertes Anbohren Kompatibel mit Handbohrmaschinen Präzise Metallbearbeitung dank HSS und Normkonformität Der kurze HSS-Bohrer bietet hohe Elastizität und ist besonders geeignet für die Bearbeitung von legiertem und unlegiertem Stahl sowie Gusseisen und Nichteisenmetallen. Die Einhaltung der DIN 338 gewährleistet standardisierte Abmessungen und eine zuverlässige Passform im Bohrfutter. Für Anwender bedeutet das verlässliche Wiederholgenauigkeit und geringere Ausschussraten bei Serien- oder Reparaturarbeiten. Kurz-Ausführung für bessere Führung und weniger Schwingungen Die reduzierte Auskraglänge erhöht die Stabilität des Werkzeugs und minimiert Vibrationsneigung beim Bohren. Dadurch lassen sich auch Bohrungen mit kleinem Durchmesser kontrollierter ausführen, was die Wahrscheinlichkeit von Abdrift und Werkzeugbruch senkt. Anwender profitieren von sauberen Bohrbildern und einer längeren Standzeit des Werkzeugs. Typ N‑Geometrie erklärt: Vorteil bei Metall Die Typ N Normalspirale ist die klassische Geometrie für Metallbohrer und wurde für universelle Metallanwendungen optimiert. Diese Form unterstützt gleichmäßigen Spanabtrag und ist für den Einsatz an stationären sowie mobilen Bohrmaschinen vorgesehen. Für Anwender ohne tiefes Fachwissen: Die Typ N‑Geometrie bedeutet einfache Handhabung und guten Allroundeinsatz beim Bohren in Metallen. Spitzenwinkel 118° und praktische Pflegehinweise Der Spitzenwinkel 118° sorgt für einfaches Anbohren und gute Zentrierung, besonders bei weicheren Metallen. Durch gezieltes Ausspitzen lassen sich Reibkräfte reduzieren und der Vorschub verringern, was das Bohrergebnis verbessert. HSS‑Bohrer lassen sich bei Bedarf nachschleifen; dabei darauf achten, die ursprüngliche Geometrie und den Spitzenwinkel zu erhalten, um die Leistung nicht zu beeinträchtigen. Die Empfehlung: Setzen Sie auf den robusten HSS Spiralbohrer Typ N von MetavCUT für präzise Metallbohrungen – bei Fragen zur Anwendung oder zur Auswahl des passenden Bohrers berät METAV Werkzeuge kompetent und persönlich per E‑Mail unter info@metav-werkzeuge.com, telefonisch unter +49 2822 7131930 oder per WhatsApp +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40012-FDA Typ: Typ N Material: HSS Durchmesser: 1,2 mm Spirallänge: 16 mm Gesamtlänge: 38 mm Spitzenwinkel: 118° Ausführung: kurz Norm: DIN 338 Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man den Spiralbohrer von MetavCUT, Typ N? Der Spiralbohrer von MetavCUT, Typ N, wird vor allem bei der Bearbeitung hochfester Werkstoffe und bei größeren Bohrdurchmessern eingesetzt; seine Bauform lässt sich leicht nachschleifen und er hält größeren Belastungen stand. Welche drei Bohrertypen gibt es? Bei Bohrern unterscheidet man grundsätzlich Metallbohrer, Holzbohrer und Stein-/Betonbohrer, wobei der Spiralbohrer von MetavCUT speziell als Metallbohrer konzipiert ist. Warum werden Spiralbohrer ausgespitzt? Der Spiralbohrer von MetavCUT wird ausgespitzt, um die Querschneide an der Spitze zu verkleinern; das reduziert Reibkräfte, verringert die erforderlichen Vorschubkräfte und verbessert die Zentrierung im Werkstück. Kann man mit dem Metallbohrer von MetavCUT auch in Holz bohren? Der MetavCUT Spiralbohrer kann in Holz verwendet werden, führt jedoch zu weniger sauberer Führung und Oberflächenqualität als ein spezieller Holzbohrer; dafür ist die Nachschleifbarkeit einfacher und der Selbsteinzug geringer.

Twist Drill — Type N, 1.3 mm, 118° Tip, Short HSS, DIN 338, Black (MetavCUT) The Twist Drill Type N is a short HSS drill bit engineered for precise metal drilling on drilling machines and handheld drills. Short HSS design for high stability 1.3 mm diameter for fine, accurate holes 118° tip for reliable centring in metal DIN 338 standard for short cylindrical shank bits Suitable for drilling machines and handheld drills Precise metal drilling with stable short design The short HSS construction of this Twist Drill delivers reduced deflection and improved concentricity compared with longer bits, which makes it ideal when hole accuracy matters. The Type N geometry is the classic metal spiral suited for steels, cast iron and non-ferrous metals, and the comparatively short overhang ensures a firmer run-out and less vibration. For users seeking reproducible bore quality on both stationary Drilling Machines and Handheld Drills, this configuration reduces chatter and improves tool life. Material choice and tip geometry that improve performance Manufactured from High Speed Steel (HSS) and conforming to DIN 338, the bit combines toughness with wear resistance for standard metalworking tasks. The 118° tip supports easier centring on curved surfaces and soft-to-medium metals, while the rolled or ground short flute improves stability under load. This means less rework and more consistent hole quality for precision assemblies or maintenance work where small diameters like 1.3 mm are required. Practical advantages and recommended applications A short Twist Drill in black finish is particularly suited for drilling in alloyed and unalloyed steels, castings and many plastics where a stable, classic metal-drilling geometry is preferred. The compact overall length and 16 mm Spiral Length help when space is limited or when drilling clamped workpieces. For technicians and hobbyists performing repetitive small-diameter drilling, the reduced risk of breakage and simpler regrinding behavior make this bit a practical choice for workshop and industrial use. Strong recommendation: For accurate metalworking choose the MetavCUT short HSS Twist Drill Type N for reliable centring and long-lasting performance — for expert advice contact METAV Werkzeuge. Are you unsure whether this tool meets your requirements or need additional technical data? No problem — METAV Werkzeuge offers extensive and competent advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 40013-FDA Diameter: 1.3 mm Tip Angle: 118° Material: HSS Execution: short Spiral Length: 16 mm Total Length: 38 mm Colour: black Type: Type N Application: Drills for metal Standard: DIN 338 For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill from MetavCUT Type N drill? The MetavCUT Twist Drill Type N is primarily designed for metalworking: it performs well in alloyed and unalloyed steels, cast iron and many non-ferrous metals, and can also be used in certain plastics where a classic metal-drilling geometry is adequate. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and for larger drill diameters; it is easy to regrind and withstands higher loads, so the MetavCUT Twist Drill Type N is used especially for metalworking tasks that demand durability and consistent hole quality. Which three drill types exist? Drill types are generally categorised as metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category, optimised for machining metals rather than masonry or timber. Why are twist drills pointed? The point reduces the chisel edge at the tip, lowering friction and thus the required feed force; pointing improves centring in the workpiece, so the MetavCUT Twist Drill Type N achieves better guidance and reduced radial forces during drilling.

Twist Drill — Type N · 1.4 mm · 118° Point · HSS · Short · Black · DIN 338 The Twist Drill Type N is a short HSS metalworking drill with a 1.4 mm Diameter and a 118° Point Angle, designed for reliable, precise drilling in metal on Drilling Machines. Short HSS design for higher Stability DIN 338 compliant for assured Quality 118° Point Angle for precise Centering Type N Normal Spiral optimised for Metal Black Finish for improved visibility during work Durable HSS Construction for Consistent Performance Gefertigt aus HSS (High Speed Steel) bietet dieser kurze Twist Drill eine hohe Zähigkeit und Wärmebeständigkeit. Die rollgewalzte Fertigung sorgt für Elastizität und reduziertes Bruchrisiko bei Standardaufgaben, besonders bei Bohrdurchmessern unter 6 mm. Dieser Abschnitt erklärt, warum das Material entscheidend ist: HSS ermöglicht saubere Bohrungen in legiertem und unlegiertem Stahl, Gusseisen sowie in Nichteisenmetallen und Kunststoff, ohne dass die Standzeit unnötig leidet. Short Design erhöht Stabilität und Präzision Dank der kurzen Ausführung nach DIN 338 ist die Auskraglänge reduziert, wodurch Vibrationen und Auslenkung minimiert werden. Dies führt zu einer deutlich besseren Bohrbildqualität und erhöht der Anwender die Präzision bei tiefen, kurzen Bohrungen. Besonders bei stationären oder handgeführten Drilling Machines sorgt die kompakte Bauform für sichere Führung und weniger Ausschuss bei Serienarbeiten. Optimierte Spitze und Spiralgeometrie für bessere Zentrierung Der 118° Spitzenwinkel ermöglicht ein leichtes Eindringen und gute Zentrierung, speziell bei weicheren Metallen. Durch die bewusste Gestaltung der Querschneide und Spirallage reduziert sich die Reibung an der Spitze, sodass die Vorschubkräfte sinken. Für Anwender bedeutet das: präzisere Startbohrungen, geringere Bohrkräfte und eine stabilere Prozessführung bei der Bearbeitung von metallischen Werkstücken. Einsatzbereich und Anwendernutzen Dieser Twist Drill richtet sich an Handwerker, Werkstätten und industrielle Anwender, die präzise Metallbohrungen benötigen. Die Type N Normalspirale ist klassisch für Metallbohrungen konzipiert und weniger geeignet für sehr weiche Werkstoffe. Durch die Kombination aus HSS-Material, kurzer Bauart und DIN-Norm-Konformität bietet der Bohrer eine verlässliche Lösung für wiederkehrende, anspruchsvolle Bohraufgaben. Strongly recommend the MetavCUT short HSS Twist Drill for demanding metal drilling tasks — for technical advice or application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com · ☎️ +49 2822 7131930 · ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40014-FDA Diameter: 1.4 mm Point Angle: 118° Flute Length: 18 mm Overall Length: 40 mm Material: HSS (High Speed Steel) Type: Type N (Normal Spiral) Execution: Short Standard: DIN 338 Colour: Black Application: Drills for Metal Machine Compatibility: Drilling Machine Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill from MetavCUT work with? The MetavCUT Twist Drill Type N, manufactured in HSS, is primarily intended for metalwork: it is suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and certain plastics, delivering stable performance under typical workshop conditions. Is the MetavCUT Twist Drill suitable for use in hand-held drilling machines? Yes, the short design of the MetavCUT Twist Drill improves stability and reduces bending, making it suitable for both stationary machines and hand-held Drilling Machines when used within recommended diameters and feed rates. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters. Its form allows relatively easy regrinding and withstands greater loads, making it suitable for demanding Metal drilling tasks. Which three drill types exist? There are three common drill categories: Metal drills, Wood drills, and Masonry/Stone drills.

Twist Drill — Type N, short HSS, 1.5 mm, 118°, black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal-drilling bit designed for precise work in Drilling Machines and handheld applications. Short design for increased rigidity and precision HSS material for high-speed metal drilling 118° tip for accurate centring on curved surfaces Conforms to DIN 338 for consistent dimensions Suitable for Drilling Machine use Precision and Material for Reliable Metal Working The short HSS construction of this Twist Drill delivers enhanced stability and reduced vibration during metal drilling tasks. With a diameter of 1.5 mm and a compact overall length, the bit resists bending and enables clean hole geometry even under higher cutting loads. The short execution improves concentricity in the chuck, which directly benefits accuracy and tool life compared with longer, less rigid alternatives. Performance on Machines and Practical Benefits Equipped with a 118° tip angle and the classic Type N spiral, this drill bit excels at entering metal smoothly and maintaining a reliable cutting edge. The tip geometry supports improved centring and reduces walking on slightly curved or irregular surfaces, while the material choice (High Speed Steel) permits consistent cutting performance at elevated spindle speeds. For metalworking operations up to moderate diameters, the design translates into predictable chip evacuation and fewer reworks. Who benefits from this bit and where to use it Metal fabricators, maintenance technicians, and demanding hobbyists gain the most from this compact Twist Drill by MetavCUT because the bit's robustness suits frequent use on sheet metal, cast parts and non-ferrous components. Workshops that prioritise repeatable hole quality will find the Type N geometry and DIN 338 conformity especially helpful when producing batches or preparing parts for assembly, as fewer rejects and faster setup checks are common outcomes. Standards, handling and service advantages Manufactured to DIN 338 as a short spiral drill, the bit offers standardised dimensions that ease replacement and tool management. The HSS material is straightforward to sharpen, and the shorter flute length lowers the risk of breakage for diameters below common thresholds. For users unsure about suitability or requiring technical comparisons, MetavCUT and METAV Werkzeuge provide expert guidance to match the drill to the machining context. For robust, precise metal drilling choose the MetavCUT HSS Twist Drill Type N — for expert advice and order assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 40015-FDA Diameter: 1.5 mm Spiral Length: 18 mm Overall Length: 40 mm Tip Angle: 118° Execution: short Material: HSS (High Speed Steel) Type: Type N Colour: black Standard: DIN 338 Suitable for: Drilling Machine Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill Type N from MetavCUT? The MetavCUT Twist Drill Type N is primarily used for drilling in metal; thanks to its HSS construction and standard Type N spiral it performs reliably on ferrous and non-ferrous metals in both Drilling Machines and hand-held applications. Which three main drill types exist and how does the MetavCUT Twist Drill fit in? The three common drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for steel, castings and non-ferrous materials. For what is a Twist Drill used? A MetavCUT Twist Drill is mainly applied in the machining of high-strength materials and for larger hole diameters; its form is comparatively easy to resharpen and it withstands greater loads, making it suitable for demanding metalworking tasks. Why are drill tips sharpened on Twist Drills? Sharpening the tip of a MetavCUT Twist Drill reduces the cross-edge at the point, which lowers friction and therefore requires less feed force; at the same time the sharpened tip centres better in the workpiece for improved hole accuracy. Can a metal Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill Type N can be used in wood, but guidance and finish are typically inferior to specialised wood drills; metal bits are easier to resharpen and exhibit less self-feeding, which can be an advantage in some situations. At which drilling depths is the Twist Drill most commonly used? A solid drilling operation is commonly executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool, providing a reliable cylindrical bore by material removal. What is better, HSS or HSSE for a MetavCUT Twist Drill? The general belief that HSSE is always superior to HSS is not correct; when deciding between HSS and HSSE for a MetavCUT Twist Drill Type N, consider the actual working conditions to determine whether the higher cost of HSSE is justified.

Twist Drill — Type N short HSS drill, 1.6 mm, 118°, black, DIN 338 The Twist Drill Type N is a short High Speed Steel drill designed for precise metal drilling with a 1.6 mm diameter and a 118° point angle, suitable for Drilling Machines and hand drills. Short HSS Twist Drill 1.6 mm diameter 118° point angle for quick centring DIN 338 short design for higher stability Type N normal spiral for metal machining Black finish for corrosion resistance Greater accuracy thanks to short design and high rigidity A short configuration reduces overhang and bending, delivering improved stability and more accurate hole positions when working with metal. The compact geometry of this Twist Drill minimises chatter and allows consistent feeds even when using portable Drilling Machines. Professionals and hobbyists benefit from a compact bit that keeps drill axis deviation low, producing clean holes with minimal rework. Robust HSS material and application guidance for metal Manufactured from HSS (High Speed Steel), this Type N drill combines wear resistance with toughness; the material choice makes the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The 118° point angle offers reliable centring on common metal surfaces and is a practical compromise between cutting aggressiveness and tip life. For best results use steady feed rates and correct cutting fluid when machining harder materials. Who should use this drill and how it stands out This Twist Drill targets workshops, tool rooms and dedicated DIY users who require precision in metalworking. The Type N normal spiral is optimised for metal cutting, providing efficient chip evacuation and predictable performance. The black surface finish improves resistance to corrosion during storage and handling. Choose this short HSS bit when dimensional accuracy and durability matter more than deep-hole capability. We recommend the MetavCUT Twist Drill for reliable metal machining — for technical advice or to confirm suitability contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40016-FDA Durchmesser: 1.6 mm Spitzenwinkel: 118° Gesamtlänge: 43 mm Spirallänge: 20 mm Ausführung: short Typ: Type N Material: HSS Farbe: black Für Bohrmaschine: Drilling Machine Norm: DIN 338 Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill mainly used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger-diameter metal holes; its shape is easy to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? In general the three main drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for cutting metal. Is the MetavCUT Twist Drill suitable for stainless steel? The MetavCUT Twist Drill in HSS can drill stainless steel with correct coolant and reduced feed; however for prolonged work in highly abrasive or very hard stainless grades consider specialised coatings or higher‑alloy variants. How should the MetavCUT Twist Drill be sharpened and maintained? Sharpen the Twist Drill on a bench grinder or dedicated drill sharpener following the original point geometry; maintaining the 118° point and even lips preserves centring and reduces required feed forces.

Twist Drill — Type N short HSS, 1.75 mm diameter, 118° point angle, black, DIN 338 A Twist Drill (Type N) designed for precise metal drilling with a 1.75 mm diameter and a 118° point angle for reliable centring in standard machining applications. Short HSS Type N for precise metal drilling 118° point angle for reliable centring 1.75 mm diameter with 43 mm overall length DIN 338 compliance for standardised quality Black short design for enhanced stability High stability and material benefits for demanding metalwork Constructed from HSS (High Speed Steel), this short Twist Drill offers a robust balance of elasticity and strength that reduces the breakage risk when machining small diameters. The short execution increases stability and minimises deflection during drilling, which results in more consistent hole geometry and longer life under cyclic loads. For customers requiring dependability in series production, the combination of HSS and a short design delivers a reliable solution. Suitable applications and what the geometry achieves The Type N geometry is the classical choice for metalworking: ideal for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. The 118° point angle provides easier penetration and better centring on mildly curved surfaces, which helps reduce wandering at the start of a hole. When paired with appropriate speeds and feeds, this drill suits both stationary drilling machines and hand-operated drilling machines for controlled, repeatable results. Who benefits from this tool and why it was made Engineers, toolroom technicians and maintenance professionals who require precise, stable holes in metal will value the short design and DIN 338 standard compliance. The drill is optimised for situations where rigidity matters more than reach, such as countersunk setups, jig operations or when machining on workpieces with limited overhang. The short flute length simplifies chip evacuation for small diameters, supporting efficiency on the shop floor. Standard conformity and practical guidance for selection Compliant with DIN 338, this short twist drill meets the dimensional and production specifications expected in industrial environments. The designation “short” refers to the reduced overall and spiral length, improving rigidity compared with standard-length drills of the same diameter. For small-diameter holes up to the specified length, this design minimises vibration and produces a cleaner finish, making it suitable for precision tasks in metal fabrication. Strong recommendation: The MetavCUT Twist Drill Type N in HSS is an excellent choice for stable, precise metal drilling — for further technical advice or to confirm suitability for specific applications, contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400175-FDA Diameter: 1.75 mm Point angle: 118° Type: Type N Colour: black Execution: short Material: HSS Spiral length: 20 mm Overall length: 43 mm Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drilling diameters in metalworking; its design is easy to regrind and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category. Why are twist drills pointed? The point sharpening reduces the cross-edge at the drill tip; for the MetavCUT Twist Drill Type N this lowers friction, reduces required feed forces and improves centring in the workpiece. Can a Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill Type N can be used in wood, but it offers less guidance and a less clean finish compared with dedicated wood drills; it is, however, easier to regrind and has a lower self-feeding tendency. For which drilling depths is the Twist Drill most used? A full-diameter through-hole is often performed with a twist drill; for diameters up to around 20 mm and drilling depths up to about 100 mm, the twist drill is the most frequently used tool, applicable to the MetavCUT Twist Drill Type N within its length limits. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to HSS is not correct; choice should be based on actual working conditions and whether those conditions justify the higher price — the MetavCUT Twist Drill Type N in HSS is suited to many standard metalworking tasks.

Twist Drill — Type N Short HSS, 1.7 mm, 118°, Black, DIN 338 The Twist Drill (Type N) is a short HSS metal drill designed for precision drilling with a 1.7 mm diameter and a 118° tip angle, suitable for use in drilling machines and hand drills. Short design for high stability Precision 1.7 mm diameter for fine holes 118° tip angle for fast centring HSS construction for metalworking durability Conforms to DIN 338 for standardised quality High stability and accuracy for metalworking tasks Thanks to its short design and HSS material, this short twist drill provides increased rigidity and reduced bending during operation, which translates directly into more accurate hole positions. The reduced overhang improves tool life in demanding metalworking environments, making it ideal for setups where concentricity matters. Use in hand drills and drilling machines benefits from the stable geometry to achieve repeatable results with minimal runout. Optimised tip geometry for reliable penetration The 118° tip angle is chosen to balance entry behaviour and centring for common metals; it facilitates reliable penetration and reduces walking on curved or non-flat surfaces. For operators unfamiliar with tip angles: a smaller angle eases initial centring, while larger angles shorten the time to break through harder materials. This Type N geometry is a classic choice for metal, offering dependable starting behaviour without excessive cratering. Material selection and standard conformity for consistent performance Manufactured from HSS (High Speed Steel) and complying with DIN 338, this short twist drill offers a combination of toughness and heat resistance appropriate for alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics. DIN 338 classification ensures consistent dimensions and shank form, simplifying tool selection for machining centres and maintenance workshops that require standardised replacement tools. Practical application and who benefits most Designed primarily for precision metal drilling, the tool suits workshop technicians, toolmakers and maintenance personnel who require fine-diameter holes with reliable centring. The short length reduces flex and is particularly advantageous when drilling up to moderate depths in tough materials, where stability and repeatability are key requirements for production or repair tasks. We recommend the MetavCUT Twist Drill (Type N) for any workshop needing a robust, short HSS solution for precise metal drilling — for personalised advice or additional technical details contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Specifications Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40017-FDA Typ: Type N Durchmesser: 1.7 mm Spitzenwinkel: 118° Gesamtlänge: 43 mm Spirallänge: 20 mm Ausführung: short Material: HSS Norm: DIN 338 Farbe: black Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT Type N used for? The Twist Drill from MetavCUT (Type N) is primarily used for drilling high-strength materials and larger diameters in metalworking; its shape makes it easy to resharpen and able to withstand higher loads, which is why it is commonly chosen for demanding applications. Which three drill types exist? The three main drill types are Metal drills, Wood drills and Stone/Concrete drills, and the MetavCUT Twist Drill (Type N) belongs to the category of metal drills optimised for steel and similar materials.

Twist Drill — Type N, 1.8 mm, 118°, Short HSS, Black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal-drilling bit designed for precise, stable holes in steel and non‑ferrous metals using drilling machines and hand drills. Short design for high stability and precision HSS material for wear-resistant metal drilling 118° tip for improved centring on curved surfaces DIN 338 compliant for standardised quality Suitable for Drilling Machines and Hand Drills Faster, more reliable results thanks to short HSS construction The Twist Drill features a Short overall profile with a Spiral Length of 22 mm and an Overall Length of 46 mm, which reduces overhang and dramatically improves stability during drilling. Made from HSS (High Speed Steel), the bit combines elasticity with wear resistance; this manufacturing method lowers breakage risk for holes below 6 mm and keeps the cutting edge durable under standard metalworking loads. As a result, operators achieve cleaner holes with less vibration and better tool life. Precise centring and controlled penetration for metalworking A 118° Tip Angle gives this Type N geometry reliable centring on slightly curved or irregular surfaces and reduces the tendency to wander at startup. While larger tip angles are used for very hard materials, the 118° geometry is effective for many steels, cast iron and non‑ferrous metals, balancing entry sharpness and cutting life. The normal spiral flute design evacuates chips efficiently, supporting steady feed rates and consistent hole quality. Optimised for workshop use and maintenance tasks Engineers, maintenance technicians and hobbyists benefit from the Type N design: a classic metal‑drilling profile that excels in routine shop and site tasks. Compatibility with standard Drilling Machines and common chucks ensures easy integration into existing toolsets. The compact length makes the bit particularly useful when access is limited or when rigidity is paramount, for instance when drilling in fixtures, jigs or on portable workpieces. Conformity, resharpening and practical handling Conforming to DIN 338, this short Twist Drill follows standardised dimensions and tolerances, making replacement and inventory straightforward. The short geometry also simplifies resharpening: the flute and point shape are easy to regrind while maintaining the original cutting geometry. For best results, clamp the bit securely, use appropriate cutting fluid for ferrous metals and avoid excessive feed to prevent overheating. Proper storage and occasional light resharpening extend service life and maintain hole accuracy. Highly recommended: Choose MetavCUT’s Twist Drill Type N for precise, stable metal drilling — for personalised technical advice METAV Werkzeuge is pleased to assist you at info@metav-werkzeuge.com, Tel +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40018-FDA Type: Type N Diameter: 1.8 mm Tip angle: 118° Material: HSS Overall length: 46 mm Spiral length: 22 mm Execution: Short Standard: DIN 338 Colour: Black Application: Drills for metal Suitable for: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its shape allows for straightforward resharpening and it endures higher loads, making it suitable for through‑holes and robust workshop applications. Which three drill types are there? Common drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the Twist Drill (MetavCUT, Type N) belongs to the Metal Drill group and is optimised for steel and similar materials.

Spiralbohrer (Typ N), 1,9 mm, 118°, HSS, kurz, schwarz, DIN 338 Der Spiralbohrer (Typ N) ist ein kurzer HSS-Metallbohrer für präzise Bohrungen mit Handbohrmaschine und Einsatz an stationären Werkzeugmaschinen. Kurz-Ausführung nach DIN 338 für mehr Stabilität HSS-Material für elastisches Bohren in Stahl Spitzenwinkel 118° für einfache Zentrierung Spirallänge 22 mm, Gesamtlänge 46 mm für präzise Führung Schwarz beschichtete Oberfläche reduziert Reibung Robuste Werkstoffwahl für belastbare Metallarbeiten Der Einsatz von HSS (Schnellarbeitsstahl) macht dieses Bohrwerkzeug widerstandsfähig gegen thermische Beanspruchung und sorgt für eine erhöhte Elastizität bei Standardaufgaben. Daraus resultiert ein geringeres Bruchrisiko besonders bei kleinen Durchmessern unter 6 mm. Diese Materialwahl bietet Anwendern den praktischen Vorteil, dass Löcher in legierten und unlegierten Stahl sowie Gusseisen sauber und zuverlässig erzeugt werden können, ohne sofortige Überhitzung des Werkzeugs zu befürchten. Kurze Bauform nach DIN 338 für präzise Führung Die kurze Ausführung nach DIN 338 reduziert die Auskraglänge und verbessert dadurch die Stabilität beim Bohren. Daraus folgt eine deutlich bessere Präzision bei sensiblen Bohrarbeiten, weil ein Verbiegen oder Schwingen des Werkzeugs minimiert wird. Anwender profitieren besonders bei filigranen Werkstücken von einer ruhigeren Laufweise und gleichmäßigeren Bohrbildern, was Nacharbeiten reduziert und die Qualität der Verbindungslöcher erhöht. Durchmesser, Spitzenwinkel und Geometrie erklären den Nutzen Der Durchmesser 1,9 mm in Kombination mit dem Spitzenwinkel 118° ermöglicht ein leichtes Anbohren und eine gute Zentrierung auf runden oder beschichteten Oberflächen. Ein spitzerer Winkel erleichtert das Eindringen, reduziert die notwendige Vorschubkraft und verbessert das Führungsempfinden bei der Handbohrung. Dadurch eignet sich dieses Werkzeug besonders für präzise Vorbohrungen und Serienarbeiten, bei denen saubere Anschnitte wichtig sind. Einsatzbereich und Anwenderkreis – von Handwerker bis Maschinenpark Der kurze Spiralbohrer (Typ N) richtet sich an Profi-Handwerker sowie industrielle Anwender, die Metall bearbeiten. Durch die Kombination aus Spirallänge 22 mm und Gesamtlänge 46 mm ist das Werkzeug ideal für Anwendungen mit begrenztem Platz und für Bohrungen in drehenden sowie beweglichen Maschinen. Die Ausführung in Schwarz reduziert Reibung sichtbar und unterstützt eine längere Standzeit; Anwender mit Wartungsbedarf profitieren von der einfachen Nachschleifbarkeit. Setzen Sie auf den kurzen HSS-Spiralbohrer von MetavCUT (Typ N) für präzise und stabile Metallbohrungen — bei Unsicherheiten berät METAV Werkzeuge persönlich per E‑Mail, Telefon oder WhatsApp: info@metav-werkzeuge.com | +49 2822 7131930 | +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40019-FDA Material: HSS Norm: DIN 338 Typ: Typ N Durchmesser: 1,9 mm Spitzenwinkel: 118° Spirallänge: 22 mm Gesamtlänge: 46 mm Farbe: schwarz Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man den Spiralbohrer von MetavCUT (Typ N) am häufigsten? Der Spiralbohrer von MetavCUT (Typ N) wird vor allem bei der Bearbeitung hochfester Werkstoffe und großen Bohrdurchmessern eingesetzt. Diese Bauform ist leicht nachzuschleifen und hält auch größeren Belastungen stand, weshalb sie sich besonders für langlebige und belastbare Bohrungen in Metall eignet. Welche 3 Bohrertypen gibt es? Bei Bohrern unterscheidet man grundsätzlich Metallbohrer, Holzbohrer und Stein-/Betonbohrer. Der Spiralbohrer von MetavCUT gehört zur Kategorie Metallbohrer und ist speziell für das Bohren in metallischen Werkstoffen ausgelegt.

Spiralbohrer (Typ N) — HSS, Ø 10,1 mm, 118° Spitzenwinkel, kurze Ausführung, schwarz, DIN 338 Der Spiralbohrer (Typ N) ist ein kurzer HSS-Bohrer für präzise Metallbohrungen mit Ø 10,1 mm, optimal einsetzbar in Handbohrmaschinen und nach DIN 338 gefertigt. Kurze Bauform für maximale Stabilität bei Metallbohrungen HSS-Material für hohe Verschleißfestigkeit und Elastizität 118° Spitzenwinkel für sicheres Zentrieren und ruhigen Anlauf Normgerecht nach DIN 338, geeignet für stationäre und mobile Maschinen Kurze Bauform sorgt für hohe Präzision und Stabilität Die kurze Ausführung des Bohrers reduziert das Auskragen aus dem Bohrfutter und minimiert damit Schwingungen. Durch diese kompakte Konstruktion lassen sich präzise Bohrungen in Metall durchführen, da die Werkzeugführung verbessert und das Verbiegen verringert wird. Anwenderinnen und Anwender profitieren bei Serien- oder Einzelfertigung von gleichmäßigen Ergebnissen und längerer Standzeit der Werkzeuge. HSS-Material: Elastizität und Belastbarkeit für Metall Herstellungsbedingt bietet HSS (Schnellarbeitsstahl) eine Kombination aus Zähigkeit und Verschleißfestigkeit, die speziell bei metallischen Werkstoffen Vorteile bringt. Für Standardaufgaben in legiertem und unlegiertem Stahl, Gusseisen sowie Nicht-Eisenmetallen ist dieses Material besonders geeignet, weil es durch seine Elastizität das Bruchrisiko gerade bei kleinen Durchmessern reduziert. Das Ergebnis sind zuverlässige Bohrungen und einfache Nachschleifbarkeit. 118° Spitzenwinkel für bessere Zentrierung und geringeren Vorschub Der 118° Spitzenwinkel erleichtert das Anbohren weicherer bis mittelharter Werkstoffe und sorgt für gutes Zentrierverhalten, besonders auf gewölbten Oberflächen. Durch die spitzere Geometrie wird die Querschneide verkleinert, wodurch die Reibkräfte reduziert werden und geringere Vorschubkräfte nötig sind. Diese Eigenschaft erlaubt kontrolliertes Arbeiten mit Handbohrmaschinen und verbessert die Bohrqualität. Anwendungsbereich und passende Maschinen Der Bohrer wurde nach DIN 338 als kurze Ausführung mit Zylinderschaft konzipiert und eignet sich daher für den Einsatz in Handbohrmaschinen sowie in stationären oder beweglichen Werkzeugmaschinen. Diese Ausführung ist speziell für die Bearbeitung von Metall vorgesehen und bietet durch die reduzierte Länge zusätzliche Festigkeit bei tieferen Bohrungen im Durchmesserbereich um 10,1 mm. Hinweise zur Handhabung und Pflege Zur Verlängerung der Standzeit werden moderate Schnittgeschwindigkeiten, geeignete Kühlschmierstoffe und korrektes Einfädeln im Bohrfutter empfohlen. Die Spitze lässt sich bei Bedarf nachschleifen; dabei bleibt die Funktionalität des Bohrers erhalten und die Präzision gewahrt. Für sichere Anwendung stets auf passende Spannweite im Bohrfutter und gleichmäßigen Vorschub achten. Für präzise Metallbohrungen empfiehlt MetavCUT diesen HSS Spiralbohrer; bei Unsicherheiten oder für ergänzende technische Daten berät METAV Werkzeuge persönlich per E‑Mail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 oder WhatsApp: +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40101-FDA Typ: Typ N Durchmesser: 10,1 mm Spitzenwinkel: 118° Gesamtlänge: 133 mm Spirallänge: 87 mm Ausführung: kurz Material: HSS Norm: DIN 338 Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man Spiralbohrer? Der Spiralbohrer (Typ N) von MetavCUT wird überwiegend bei der Bearbeitung hochfester Werkstoffe und bei größeren Bohrdurchmessern eingesetzt. Die Form lässt sich leicht nachschleifen und hält größeren Belastungen stand, wodurch präzise und belastbare Bohrungen in Metall möglich sind. Kann man mit Spiralbohrer Holz bohren? Metallbohrer wie der Spiralbohrer (Typ N) von MetavCUT können auch in Holz verwendet werden, liefern jedoch eine schlechtere Führung und ein weniger sauberes Bohrbild. Dafür sind sie einfacher nachzuschleifen und besitzen einen geringeren Selbsteinzug.

Twist Drill (Type N) – 10.25 mm, 118° tip, Short HSS, DIN 338, Black The Twist Drill (Type N) is a short HSS metal drill designed for precise drilling with hand or drilling machines, delivering stability and reliable performance for a wide range of metalworking applications. Short HSS construction for high stability 10.25 mm diameter for medium-sized holes 118° tip for reliable centring and control Conforms to DIN 338 for short twist drills Suitable for use with Drilling Machine and hand drills Durable HSS construction for dependable metalworking High-Speed Steel (HSS) gives this short twist drill a balanced combination of hardness and toughness, making it suitable for drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The roll-formed manufacturing process commonly used for these drills improves elasticity and reduces the risk of breakage under normal machining loads. This results in a tool that stands up to repeated use while maintaining cutting performance and service life. Short design and DIN 338 deliver rigidity and precision The short execution specified by DIN 338 reduces overhang and therefore limits bending and chatter during operation. With a Spiral Length of 87 mm and an Overall Length of 133 mm for the 10.25 mm variant, the geometry improves stability and enables more accurate, straighter holes when compared with longer drills. This makes the tool particularly useful where precision and minimal runout are required. Optimised geometry for controlled entry and guided drilling A 118° tip angle provides a good compromise between centring ability and cutting efficiency for many metal applications; a modest tip angle reduces walking on curved or slightly uneven surfaces and supports controlled feed rates. The Type N normal spiral flute is the classic choice for metal drilling, offering reliable swarf evacuation in standard conditions. The black finish aids corrosion resistance and handling visibility in the work area. Practical use, sharpening and support Because the cutting point is formed to a defined angle, the Twist Drill achieves consistent entry and reduced lateral forces; sharpening restores the cutting edges and prolongs tool life. The reduced cross-edge at the tip lowers friction and required feed forces, improving centring and performance in through-hole operations. For any questions about sharpening, tool life or the correct drill choice for a specific material, METAV Werkzeuge provides competent advice and technical support to ensure the right setup for your task. Choose the MetavCUT Twist Drill (Type N) for precise metal drilling and contact METAV Werkzeuge for tailored technical advice by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 401025-FDA Diameter: 10.25 mm Tip Angle: 118° Spiral Length: 87 mm Overall Length: 133 mm Execution: Short Material: HSS Type: Type N Norm: DIN 338 Colour: Black Application: Drills for metal Suitable for: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT (Type N) mainly used for? The MetavCUT Twist Drill (Type N) is primarily used for the machining of high-strength materials and larger hole diameters; it is the standard tool for metalworking where robustness is required. Its form allows relatively easy resharpening and reliable performance under higher loads. Which three drill types are commonly distinguished? There are three main drill categories: metal drills, wood drills, and stone/concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is optimised for metals rather than masonry or timber. Can the MetavCUT Twist Drill (Type N) be used with a hand drill or should it only be used on machine tools? The MetavCUT Twist Drill (Type N) is suitable for both hand drills and stationary drilling machines, provided the correct speeds and clamping are used; for best results ensure a rigid setup and appropriate cutting parameters for the material. Why are twist drills pointed and what benefit does this give when using the MetavCUT Twist Drill (Type N)? Pointing reduces the cross-cutting edge at the tip, which lowers friction and required feed forces; as a result the MetavCUT Twist Drill (Type N) centres more reliably in the workpiece and requires less thrust, improving hole quality and tool guidance.

Twist Drill Type N — Short HSS Drill, 10.2 mm, 118°, Black, DIN 338 A Twist Drill Type N for precise metalworking, designed as a short HSS bit for drilling machines and hand drills in demanding workshop and industrial applications. Short design for high stability and precision HSS construction for wear resistance on metals Conforms to DIN 338 for short twist drills 118° point angle for reliable centring on metals Suitable for Hand Drill and Drilling Machine use Precision and short design for stable metalworking The short configuration of this Twist Drill reduces overhang and improves rigidity, resulting in greater accuracy when drilling into metal. Because the exposed length is minimised, the tool resists bending and chatter, which improves hole quality and tool life. This makes the bit particularly suitable where tight tolerances are required or where accessibility limits the use of longer drills. HSS material and durability for standard metal tasks Manufactured from HSS (High Speed Steel), the drill offers a balance of hardness and toughness for typical metalworking jobs. The material choice reduces the risk of breakage during operations under 6 mm and provides reliable wear resistance on alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. For users unfamiliar with the term, HSS means the bit maintains cutting performance at higher temperatures than standard steels. Optimised tip geometry for efficient cutting and centring A 118° point angle gives the bit good initial penetration and easier centring on slightly curved or soft surfaces, helping to start holes without wandering. For harder steels, a different point geometry can be used, but the 118° tip on this short Type N drill ensures lower thrust force and precise starts in common workshop materials, so operators can rely on consistent hole positioning. Application scope and machine compatibility Designed according to DIN 338 as a short twist drill with a cylindrical shank, this bit is intended for metalworking on both stationary machines and portable tools such as the Hand Drill or Drilling Machine. The Type N normal spiral is optimised for drilling metals rather than soft timber; use in wood is possible but guidance and finish may be inferior compared with dedicated wood drills. Who benefits from this drill and how it improves workflow Workshop technicians, maintenance staff and tradespeople who need robust, repeatable metal drilling will value the stability and service life of this short Twist Drill. By reducing deflection and improving centring, it lowers scrap rates and rework, which translates into more efficient production and fewer interruptions for tool changes. Choose MetavCUT’s robust HSS Twist Drill Type N for dependable metalworking performance and contact METAV Werkzeuge for expert advice and application support via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Marke: MetavCUT SKU: 40102-FDA Type: Type N Diameter: 10.2 mm Spiral length: 87 mm Overall length: 133 mm Point angle: 118° Execution: Short Material: HSS Standard: DIN 338 Colour: Black For: Hand Drill / Drilling Machine Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; its HSS construction and normal spiral geometry make it suitable for alloyed and unalloyed steel, cast iron and non‑ferrous metals, and it can also be used for plastics with appropriate speeds and feeds. Can this short Twist Drill be used in a handheld drilling machine? Yes, the short design and cylindrical shank of the MetavCUT Twist Drill Type N permit use in both stationary machines and a Hand Drill or Drilling Machine, offering improved stability and reduced tendency to bend compared with longer drills. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high‑strength materials and larger bore diameters; its geometry allows relatively simple re‑grinding and it withstands substantial forces, making it a common choice in metalworking where durability and reliable chip removal are required. Which three drill types exist? The three primary drill types are Metal Drill (often HSS), Wood Drill, and Masonry/Concrete Drill. Each is optimised for its specific material class and cutting conditions.

Twist Drill Type N — 10.3 mm, HSS, short, 118° tip, black, DIN 338, MetavCUT The Twist Drill Type N is a short HSS metal drill engineered for precise, stable holes in steel and other metals with hand drills and drilling machines. Short HSS design for improved stability 10.3 mm diameter for precise metal holes 118° tip angle for reliable centring Conforms to DIN 338 for short twist drills Precision and durability for metalworking tasks This short Twist Drill from MetavCUT combines HSS material with a classic Type N spiral to deliver dependable performance in metal drilling. The HSS composition provides elasticity and toughness, reducing the risk of breakage during standard drilling operations, especially for hole diameters under 6 mm. The 118° tip angle supports easier entry into softer metals while maintaining good centring behaviour, and the short geometry improves stiffness for controlled, accurate machining. Stable drilling thanks to short design and DIN 338 conformity The reduced overhang of the short configuration increases rigidity and minimises deflection during drilling, making it particularly suitable for precise work on steel and cast iron. Conformity with DIN 338 guarantees standardised dimensions and production characteristics for short twist drills with a cylindrical shank. This design choice supports consistent results on stationary and portable machines and offers a practical compromise between tool life and ease of regrinding. Clear suitability and recommended applications Designed for metalworkers, maintenance technicians and workshop environments, this twist drill excels in machining alloyed and unalloyed steel, non-ferrous metals and many plastics. The 10.3 mm diameter together with a flute length of 87 mm and an overall length of 133 mm provides a balance between penetration depth and stability for common metalworking tasks. The black finish and short execution support easy handling in manual drilling operations and in drilling machines where precise hole quality matters. We recommend MetavCUT’s HSS Twist Drill Type N for reliable, stable metal drilling — for technical advice or to confirm suitability please contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40103-FDA Diameter: 10.3 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N (Normal spiral) Execution: short Flute length: 87 mm Overall length: 133 mm Application: Drills for metal Colour: black Norm: DIN 338 For drill machine: Hand drill / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The Twist Drill by MetavCUT (Type N) is primarily used for machining high-strength materials and larger bore diameters in metalworking; its form is easy to regrind and it withstands higher loads, making it suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. Which three drill types exist and how does the MetavCUT Twist Drill fit in? The three common drill families are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill category and is optimised for metalworking applications.

Twist Drill Type N — HSS short, Ø 10.4 mm, 118°, black, DIN 338 The Twist Drill Type N is a short HSS metal drill designed for precise drilling with hand and drilling machines, ideal for stable, high-accuracy metalworking tasks. Type N HSS short twist drill for metal Diameter 10.4 mm for precise holemaking 118° point angle for fast centering DIN 338 standard for short cylinder shank Black finish reduces glare and wear Robust HSS Construction for Reliable Performance The short HSS design combines elasticity and strength to perform reliably in metalworking. With a 10.4 mm diameter and a 118° point angle, this bit penetrates softer metals smoothly while maintaining a controlled centering behavior. The reduced overall length increases stiffness, which means fewer deflections and cleaner holes when compared to longer drills. The result is consistent Precision in repeatable production or workshop tasks. Engineered for Metal: Type N and DIN 338 Explained This short drill conforms to DIN 338, the specification for short cylinder-shank twist drills, and is classified as Type N, the classic spiral for metal. DIN 338 defines dimensions and tolerances so the tool fits standard chucks and provides predictable cutting behaviour. Type N geometry suits a wide range of steels, cast irons and non-ferrous metals; for harder materials consider alternative point angles. An explanatory note: a 118° point angle aids entry and centering on curved or softer surfaces. Stability and Practical Advantages in Use Because the fluted length is limited, the short configuration reduces the unsupported overhang in the chuck, boosting Stability and lowering the risk of breakage. This makes the bit particularly useful in benchwork and portable drilling where rigidity matters. The black finish improves visibility against bright metal and can reduce light reflection during alignment, helping operators achieve straight, accurate holes more reliably. Who Benefits and How to Optimize Results Craftspeople and maintenance technicians who need dependable metal drilling will value the consistent performance of this short HSS Twist Drill. For best results use moderate cutting speeds and steady feed, and ensure adequate cooling or lubrication for prolonged life in alloyed steels. The bit is straightforward to re-sharpen if required; its classic geometry is simple to restore, extending service life and reducing replacement frequency. We recommend the MetavCUT Twist Drill Type N for those seeking precise, stable metal drilling — for tailored advice or to check suitability for specific materials contact METAV Werkzeuge: info@metav-werkzeuge.com — Phone +49 2822 7131930 — WhatsApp +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 40104-FDA Type: Type N Diameter: 10.4 mm Flute Length (Spirallänge): 87 mm Overall Length (Gesamtlänge): 133 mm Point Angle (Spitzenwinkel): 118° Execution (Ausführung): short Material: HSS Standard (Norm): DIN 338 Intended for: Drilling Machine Colour: black Application: Drills for metal Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is primarily intended for metalworking; its HSS composition and Type N geometry make it suitable for alloyed and unalloyed steels, cast iron and many non-ferrous metals, offering a balance of toughness and cutting performance. Can the MetavCUT Twist Drill Type N be used with a handheld drill? Yes, the Twist Drill Type N by MetavCUT is compatible with drilling machines and suitable for use in hand-held drills, provided the chuck secures the short cylinder shank properly and drilling is done with appropriate speeds and lubrication. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters. Its form allows for straightforward regrinding and it withstands greater loads, which makes it suitable for demanding metal drilling tasks. Which three drill types exist? The three principal drill types are metal drills, wood drills, and stone/concrete drills. Why are twist drills pointed (ausgespitzt)? Pointing reduces the cross-edge at the tip, which significantly lowers friction and therefore reduces required feed forces; it also improves the centering of the drill tip in the workpiece. Can metal drills be used to drill wood? Metal drills can be used in wood, but they generally provide less guidance and a coarser finish compared to dedicated wood drills; they are easier to resharpen and exhibit less self-feeding, which can be an advantage in some situations. For which drilling depths is the Twist Drill most commonly used? A through-hole is typically executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common assumption that HSSE is automatically superior to HSS is not universally true. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for the intended application.

Twist Drill — Type N short HSS, 10.5 mm, 118°, black, DIN 338 The Twist Drill Type N is a short, high‑speed steel metal drill designed for precise, stable holemaking with drilling machines and hand drills. Short HSS design for enhanced stability 10.5 mm Diameter for standard metal holes 118° Point for reliable centring Conforms to DIN 338 for short twist drills Compatible with Drilling Machine and hand drills Precision and stability for demanding metalwork The Twist Drill by MetavCUT delivers consistent, accurate results when drilling metal. Its short overall geometry reduces overhang and vibration, which increases Stability and improves hole quality under load. The 10.5 mm Diameter and 118° Point combine to offer reliable centring on flat and slightly curved surfaces, reducing walking at the start of the hole. For workshop and on‑site repairs, this design minimises the need for rework and supports higher feed rates without sacrificing accuracy. Material and manufacture that support longevity Manufactured from HSS (High Speed Steel) and produced according to DIN 338, this short twist drill is suitable for a wide range of metallic materials. The roll‑rolled HSS process makes the flute and body more elastic and less prone to fracture, especially in smaller diameters. As a result, users benefit from improved Durability and simpler re‑sharpening compared with brittle alternatives. The black finish provides corrosion resistance during storage and handling, supporting longer tool life in daily use. Designed use and clear advantages for metal drilling This Type N twist drill is optimised for machining metal, including alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. The short length makes it particularly effective in situations where rigidity is required, for example when using portable Drilling Machine or bench drills under varying cutting conditions. The tool’s geometry reduces the tendency to bend, enabling clean, repeatable holes even when tight tolerances are required. Who benefits and typical applications Professionals and hobbyists who frequently work with metal will appreciate the combination of Stability and ease of handling the Twist Drill Type N. It is ideal for maintenance, mechanical assembly and production processes that require reliable holemaking with limited clearance. Because the drill is classified under DIN 338, it fits standard expectations for short twist drills used in workshops and industrial environments, making replacement and inventory management straightforward. Practical tips and explanation for non‑experts For users less familiar with drilling terminology: HSS means High Speed Steel, a robust material for metal drilling; DIN 338 denotes the standard for short twist drills with cylindrical shanks; and the 118° Point Angle refers to the cone angle at the tip that affects how the drill first penetrates the material. Using correct speeds and steady feed prevents workpiece overheating and prolongs tool life. If centring is difficult on curved or painted surfaces, a centre punch or pilot hole can help start the cut precisely. For questions about suitability, additional technical data or application advice contact METAV Werkzeuge — expert support is available by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 — MetavCUT tools are recommended for reliable metalworking performance Technical Information Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40105-FDA Durchmesser: 10.5 mm Spitzenwinkel: 118° Material: HSS Norm: DIN 338 Ausführung: kurz Gesamtlänge: 133 mm Spirallänge: 87 mm Farbe: black Typ: Type N Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill MetavCUT Type N suitable for? The Twist Drill from MetavCUT (Type N) is designed primarily for metalwork and performs well in alloyed and unalloyed steels, cast iron, non‑ferrous metals and many Plastics; its HSS composition and Type N geometry are optimised for those materials. How does the short design of the MetavCUT Twist Drill Type N benefit my work? A short design in the Twist Drill (MetavCUT, Type N) reduces overhang and increases rigidity, which leads to better hole accuracy and less vibration when drilling, especially useful on portable Drilling Machine or in constrained setups. For what is a Twist Drill used? Twist Drills are mainly applied when machining high‑strength materials and for larger drill diameters; the shape is easy to re‑grind and withstands higher loads. Which three drill types exist? There are three main drill types: Metal Drill, Wood Drill and Stone/Concrete Drill. Why are twist drills pointed? Pointing a twist drill reduces the cross‑cut at the tip; by regrinding the point the friction forces are significantly lowered and lower thrust forces are required, while the tip centres better in the workpiece. Can a metal drill be used for wood? A Metal Drill can be used in Wood, but it provides poorer guidance and less clean hole edges; however it is easier to re‑grind and exhibits lower self‑feed. At what drilling depths is the twist drill most used? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. Which is better, HSS or HSSE? The general assumption that HSSE steels are always superior to HSS is incorrect; when choosing, evaluate whether the working conditions justify the higher purchase cost.