Twist Drill — Type N Short HSS Drill, Ø 0.6 mm, 118° Tip, Black, DIN 338

The Twist Drill Type N short HSS drill for metalworking, designed for stable, precise holes in steel and non-ferrous materials when used in a Drilling Machine.

• HSS Material for reliable metal drilling
• Short design (DIN 338) for high stability
• 118° Tip for improved centring on curved surfaces
• Type N Normal spiral for standard metalworking
• Black finish and 24 mm overall length

Precision and material benefits for durable metal drilling

Built from HSS (High Speed Steel), this short Twist Drill offers a resilient balance of hardness and toughness that reduces the risk of breakage, especially for small diameters. The HSS composition is particularly suitable for drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, making the tool a reliable choice for workshops and maintenance tasks. The short overall length increases rigidity and reduces vibration, resulting in cleaner holes and longer tool life.

Stability and application in metalworking machines

The DIN 338 short design paired with a Type N normal spiral makes this drill ideal for use in a Drilling Machine where precision matters. With a nominal Diameter of 0.6 mm, a Spiral Length of 7 mm and an Overall Length of 24 mm, the geometry minimises deflection and improves concentricity when clamped in the chuck. The 118° Tip provides easier centring on less rigid or slightly curved surfaces, while the short flute length gives enhanced control during feed.

Who benefits from this specialised short drill

Professionals, tool rooms and hobbyists who perform precision metal drilling will value the combination of short design and HSS material. The tool is suited for tasks requiring accurate hole positions and minimal runout, such as prototype work, instrument making and fine mechanical repairs. Its robustness under standard workshop conditions makes it a practical option for repetitive drilling where stability and repeatable results are required.

Practical handling, sharpening and maintenance tips

Correct use extends tool life: run the drill at appropriate speeds for the material, keep adequate cooling or lubrication, and avoid excessive feed that increases risk of breakage. The Type N normal spiral is straightforward to re-sharpen by experienced users; sharpening restores the cutting edges and maintains the intended 118° point geometry. For guidance on speeds, feeds or regrinding, METAV Werkzeuge offers expert advice to match the working conditions to the tool.

Strongly recommended for precise metalwork: the MetavCUT Twist Drill Type N short HSS for stable, accurate drilling — for personalised technical support contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Telephone: +49 2822 7131930, or WhatsApp: +49 170 2837271

• Designation: Twist Drill
• Brand: MetavCUT
• SKU: 40006-FDA
• Diameter: 0.6 mm
• Tip Angle: 118°
• Type: Type N
• Execution: short
• Colour: black
• Material: HSS
• Spiral Length: 7 mm
• Overall Length: 24 mm
• For Use In: Drilling Machine
• Application: Drills for metal
• Standard: DIN 338
• Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What is the MetavCUT Twist Drill used for?
The MetavCUT Twist Drill Type N short HSS is primarily applied to the machining of high-strength materials and larger hole diameters; its form allows relatively simple regrinding and it withstands greater loads, making it suitable for demanding metalworking tasks.

Which three main drill types exist?
The common categorisation lists metal drills, wood drills, and stone/concrete drills, which differ in flute geometry, tip design and material to suit each substrate.

Why are Twist Drills pointed (reamed to a tip)?
Pointing reduces the cross-edge at the tip of a Twist Drill, significantly lowering friction so that smaller feed forces are required; at the same time the sharpened tip improves the drill’s self-centring in the workpiece.

Can the Twist Drill be used to drill wood?
A metal drill can be used in wood, but the MetavCUT Twist Drill designed for metal will typically provide less guidance and a less clean finish; however, it is easier to regrind and exhibits lower self-feed compared with specialised wood bits.

For which drilling depths is the Twist Drill most used?
A through-hole in solid material is commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool.

Is HSS or HSSE better?
The general assumption that HSSE steels are categorically superior to HSS is incorrect; selection should be based on working conditions and whether the higher acquisition cost of HSSE is justified by the application.