Twist Drill Profi Line — Type N, 1.2 mm, 118° (Short, HSS‑G, DIN 338, Bright Finished)

The Twist Drill Profi Line is a short HSS‑G Type N drill designed for precision metalworking on Drilling Machines, featuring a 1.2 mm Diameter and a 118° Tip Angle for reliable centring and efficient cutting.

• Short design for improved stability and precision
• 1.2 mm Diameter with 118° Tip Angle for easier centring
• Fully ground shank (HSS‑G) for high concentricity
• Conforms to DIN 338 for short twist drills
• Bright finished surface for easy chip evacuation

Short length increases stability for precise metal holes

The short execution of this Twist Drill reduces the overhang from the chuck, resulting in markedly higher Stability and less tendency to deflect during machining. For tasks that demand exact hole position and roundness, a reduced projection minimizes runout and produces cleaner holes in metals such as steel and cast iron. This makes the Profi Line especially suitable where machine rigidity and repeatability are essential.

Faster penetration and lower feed force with ground HSS‑G geometry

Thanks to the HSS‑G (ground) geometry, the cutting edges are sharper and concentricity is higher than rolled variants; this permits up to 40% faster drilling and requires significantly lower feed force versus conventional HSS. The fully ground flute geometry produces clean chips and precise hole diameters, which is particularly advantageous when machining alloyed and unalloyed steels or sintered materials.

Tip geometry tuned for centring and controlled entry

The 118° Tip Angle on this Type N twist drill provides a balanced compromise between easy entry and accurate centring on curved or slightly uneven surfaces. A smaller tip angle assists in initial bite and localisation, so fewer pilot passes are needed for many metalworking tasks. Where softer materials are encountered, the tip still offers controlled penetration while maintaining hole quality.

Compliance with DIN 338 and targeted metalworking applications

Manufactured to DIN 338 standards for short twist drills with cylindrical shanks, this tool is specified for use in stationary and mobile drilling machines for metalworking. The Type N normal spiral is optimised for metal drilling; it is not intended as the primary choice for very soft materials where specialised geometries perform better. The bright finished surface supports efficient chip flow during continuous machining.

Who benefits from this Profi Line twist drill

Metalworkers, toolroom technicians and production engineers who require reproducible holes with minimal runout will value the short, fully ground design. For precision repairs, prototypes or series production where rigour in hole position and size is important, the drill’s combination of stability and sharp HSS‑G cutting edges provides a measurable advantage.

We recommend the MetavCUT Profi Line Twist Drill for demanding metal drilling tasks; for personalised advice, technical clarifications or to confirm suitability for your application, please contact METAV Werkzeuge — comprehensive consultation is available by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271

Technical Data

• Designation: Twist Drill
• Brand / Manufacturer: MetavCUT
• SKU: 48012‑FDA
• Diameter: 1.2 mm
• Tip Angle: 118°
• Type: Type N
• Execution: Short
• Material: HSS‑G (ground high speed steel)
• Shank Finish: Fully ground
• Overall Length: 40 mm
• Suitable for: Drilling Machine
• Surface: Bright finished
• Model Series: Profi Line
• Norm: DIN 338
• Packaging Unit: 10
• Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What is the Twist Drill Profi Line best used for?
The Twist Drill Profi Line from MetavCUT is primarily intended for drilling metal on Drilling Machines; its short HSS‑G design gives greater stability and clean holes when working with alloyed or unalloyed steels, cast iron and similar hard materials.

Can the MetavCUT Twist Drill be used for delicate, precision tasks?
Yes, the short execution and fully ground shank of this MetavCUT Twist Drill improve concentricity and reduce deflection, making it well suited to precision repair work and production operations where consistent hole geometry matters.

For what are Twist Drills used?
Twist Drills are mainly applied in the machining of high‑strength materials and for larger drill diameters; their form is easy to regrind and they withstand higher loads, making them suitable for demanding metalworking operations.

Which 3 drill types exist?
The three common drill types are: metal drills, wood drills and stone/concrete drills.

Why are Twist Drills pointed?
Pointing reduces the cross‑cut at the tip of the Twist Drill; by sharpening the point the friction forces are significantly lowered, which reduces required feed force and improves centring of the drill in the workpiece.

Can you drill wood with a Twist Drill?
A metal twist drill can be used in wood, but the MetavCUT Twist Drill will provide less guidance and a rougher finish compared with wood‑specific bits; however, metal drills are simpler to resharpen and have lower self‑feed tendency.

At which drilling depths is the Twist Drill most used?
For solid drilling, a Twist Drill is commonly used up to diameters around 20 mm and drilling depths up to 100 mm; for these ranges it is the most frequently selected tool.

What is better, HSS or HSSE?
The general belief that HSSE steels are always superior to standard HSS is incorrect; the purchase decision should consider whether the specific working conditions justify the higher cost of HSSE.

Are you unsure if this tool fits your application or do you need additional technical data? METAV Werkzeuge provides knowledgeable, extensive consultation — feel free to reach out by eMail: info@metav-werkzeuge.com, Telephone: +49 2822 7131930 or WhatsApp: +49 170 2837271.