09-18mm Cartridge For Boring Tool Set, CCMT 0602 Compatible, T8 Torx - Teknik Makina
Taking advantage of a compact design and compatibility with common indexable inserts ensures reliable boring operations and straightforward tooling management; order the cartridge directly via Metav Werkzeuge or consult the specialists for application advice. Cartridge THB03TM — 09–18 mm boring-tool cartridge, compatible with CCMT 0602 (Teknik Makina) A Cartridge THB03TM engineered for boring-tool sets to cover internal diameters from 09–18 mm, designed for use with CCMT 0602 indexable inserts. Suitable for 09–18 mm boring diameters Compatible with CCMT 0602 inserts Retained with M2.5 x 4.7 Torx screw Torx interface: T8 Consistent insert compatibility reduces tooling complexity The Cartridge THB03TM is built to accept CCMT 0602 indexable inserts, a widely used size in metalworking. This compatibility delivers clear operational benefits: interchangeability between toolholders and inserts reduces inventory variety and simplifies reordering. For workshops that fit multiple machines, the result is less idle time due to changeovers and lower overall tooling expenditure. The use of internationally established insert standards also supports predictable machining results and easy sourcing of replacements. Secure clamping for reliable repeatability A small but decisive component is the retaining hardware: the cartridge secures inserts with an M2.5 x 4.7 Torx screw and uses a T8 Torx interface. This configuration provides secure clamping with consistent torque transfer, which improves repeatability of the cutting edge position and reduces vibration during boring passes. For production environments where tolerance and surface finish matter, the result is fewer reworked parts and steadier cycle times. Simple handling that saves workshop time The cartridge’s straightforward design focuses on fast insert changes and uncomplicated maintenance. The Torx screw arrangement is compatible with common torque tools, allowing rapid exchange of inserts without specialised equipment. Fewer, faster tool changes translate into shorter machine downtime and higher effective machining time per shift, which is particularly valuable for small serial runs or mixed-batch production where agility matters. Designed for integration into standard boring systems Engineered for use within established boring-tool sets, this component fits into conventional toolholders and supports a range of internal machining tasks. The compact construction contributes to good accessibility inside bores while maintaining the rigidity required for stable cuts. For engineers and workshop managers, the benefit is a predictable upgrade path: the cartridge brings standardisation and robustness without complex retrofitting. For procurement or to verify fitment in a specific boring setup, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to source the Teknik Makina Cartridge THB03TM and confirm suitability for the intended application. Technical Data Article number: THB03TM Manufacturer: Teknik Makina Designation: Cartridge 09–18mm for Boring Tool eClass: 21041590 Numbers / Core Technical Data Diameter range: 09–18 mm Screw size: M2.5 x 4.7 Torx key size: T8 SKU: THB03TM Special features / Versions Compatible with CCMT 0602 indexable inserts Designed for boring-tool sets Secure clamping via Torx retaining screw Compact design for internal machining accessibility FAQ Which insert type fits the cartridge? The Cartridge THB03TM is designed for CCMT 0602 indexable inserts, enabling use of a common insert geometry for turning and boring tasks. What is the clamping method used? Clamping is achieved with an M2.5 x 4.7 Torx screw; the retaining interface corresponds to a T8 Torx key for tightening and removal. What internal diameters does this cartridge cover? The cartridge covers internal boring diameters from 09–18 mm, making it suitable for a broad range of small to medium bores. Is the cartridge suitable for heavy-duty machining? The cartridge is intended for standard boring-tool systems; its secure screw clamping supports stable performance, while final suitability depends on cutting parameters and machine rigidity. Can this cartridge be used with other insert manufacturers? Yes — any insert manufactured to the CCMT 0602 standard should be compatible, subject to the insert thickness and cutting geometry matching the toolholder setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120-170mm Boring Tool for CCMT 1204 Indexable Inserts, 139mm Overall Length - Teknik Makina
High rigidity from the 40 mm shank combined with compatibility for CCMT 1204 indexable inserts ensures stable internal boring across the 120–170 mm diameter range, delivering consistent surface finish and longer insert life; order directly via Metav Werkzeuge or contact the technical consultants for application advice. Teknik Makina Boring Bar for CCMT 1204 Indexable Inserts — 40 mm shank, 120–170 mm range Teknik Makina Boring Bar for CCMT 1204 Indexable Inserts is a compact, heavy‑duty holder designed for precision internal boring with CCMT 1204 carbide inserts, suited to medium and large bore operations. Compatible with CCMT 1204 indexable inserts Diameter range 120–170 mm 40 mm shank for high rigidity Robust 3.281 kg construction Greater repeatability through proven clamping and insert compatibility The holder supports CCMT 1204 indexable inserts and uses a standard T20 Torx key with an M5x12 clamping screw for secure seating and fast insert changes. This configuration reduces set‑up time and minimises run‑out variation, which translates into consistent bore tolerances and fewer rejected parts. The simple, widely used screw and key sizes mean replacement components are easy to source and maintenance can be carried out with standard workshop tools. Reduced vibration and improved surface finish from a rigid tool body A 40 mm shank and a 139 mm overall length create a stiff assembly that resists deflection during heavy cuts. The tool’s mass — 3.281 kg — contributes to damping cutting forces, stabilising the cutting zone and extending insert life. For operations where surface integrity matters, this rigidity delivers measurable improvements, such as reduced need for rework and more predictable tool life, benefiting both batch production and one‑off precision tasks. Wide bore capability and practical workshop advantages Engineered for a diameter range of 120–170 mm, the holder is suitable for a variety of internal boring tasks in medium to large components. The design enables quick insert indexing and repeatable seating, supporting efficient changeovers and shorter cycle times. Backed by Teknik Makina manufacturing and supplied through Metav Werkzeuge, this solution pairs industrial quality with straightforward procurement and reliable European logistics, helping workshops maintain continuous production without complex sourcing overhead. Discuss specific bore requirements with Metav Werkzeuge — Technical data and application guidance are available from Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKB148TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Product type: Boring bar / holder for indexable inserts Shank diameter: 40 mm Diameter range: 120–170 mm Overall length: 139 mm Weight: 3.281 kg Torx key: T20 Clamping screw: M5x12 For CCMT 1204 indexable inserts Robust construction for reduced vibration Fast insert change with standard Torx fastening Suitable for medium to large internal bores Supplied via Metav Werkzeuge FAQ What insert type does this holder accept? The holder accepts CCMT 1204 indexable inserts; it is specified as a boring bar for CCMT 1204 indexable inserts and is compatible with standard CCMT 1204 geometries. What is the shank diameter and why does it matter? The shank diameter is 40 mm; a larger shank increases rigidity, reduces deflection during cutting and improves surface finish in internal boring operations. Which diameters can be machined with this tool? This holder covers a 120–170 mm bore range, making it suitable for medium to large internal boring tasks where CCMT 1204 inserts are appropriate. What are the fastening details for the insert clamp? Insert clamping uses a T20 Torx key and an M5x12 screw, providing secure, repeatable clamping; replacement screws and keys follow common workshop standards. Who manufactures this holder and what is the SKU? The holder is manufactured by Teknik Makina and sold under SKU TKB148TM; it is distributed via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120-190mm Boring Bar For Finish Turning With CCMT 09T3 Inserts, 0.01mm Resolution - Teknik Makina
Robust finishing capability with a 40 mm shank and fine-machining accuracy to 0.01 mm ensures stable, repeatable bore results; compatible with CCMT 09T3 indexable inserts for fast insert changes and consistent surface quality. Order the boring tool directly via Metav Werkzeuge or ask our consultants if needed. Boring tool THB100TM — finishing for CCMT 09T3 indexable inserts (Teknik Makina) The boring tool THB100TM is a finishing internal boring bar designed for precision bore machining with CCMT 09T3 indexable inserts in industrial and workshop environments. Compatible with CCMT 09T3 inserts Fine finishing to 0.01 mm tolerance 40 mm shank for rigid mounting Diameter range 120–190 mm Consistent bore quality through controlled finishing The finishing bar is engineered to deliver consistent results when a high surface standard is required. By accepting the widely used CCMT 09T3 indexable inserts, the tool enables rapid insert replacement and predictable cutting geometry, which reduces scrap and rework. The specified 0.01 mm fine-machining capability refers to achievable dimensional stability in controlled conditions; this level of precision supports tight tolerance bores and improves first-pass yield. For operations where repeatability matters, the combination of stable clamping and known insert geometry provides a measurable productivity advantage. Secure clamping and setup for reliable cycle times A sturdy 40 mm shank affords the rigidity needed during finishing passes, reducing chatter and enabling higher feed stability. The overall length of 163.7 mm balances accessibility and stiffness for deep or semi-deep bores, while the tool mass of 5.06 kg contributes to vibration damping on heavier-duty machines. Insert retention is achieved with a Torx fastening system — Torx T15 key and M3.5x9 screw — providing repeatable, toolmaker-friendly clamping. These features accelerate set-up and lower the risk of insert movement during critical finishing cuts, shortening cycle times through reduced adjustments. Practical advantages for workshop and production use Designed for the finishing stage, the tool covers a bore range of 120–190 mm, making it suitable for medium‑sized internal diameters in components that require smooth internal surfaces. The modular nature of indexable inserts keeps long-term tooling costs manageable: only the insert needs replacing when wear occurs, not the entire bar. The product’s specification supports integration into both conventional and CNC turning centres used in metalworking shops. For specialist tasks, the tool’s straightforward geometry and standard fastenings simplify stockkeeping and maintenance, supporting a dependable supply chain when ordered from Metav Werkzeuge. For tailored advice or delivery from Emmerich, contact Metav Werkzeuge — our consultants can confirm suitability for specific machines and workpieces and arrange prompt supply of the Teknik Makina THB100TM. Technical data Article number: THB100TM Manufacturer: Teknik Makina SKU: THB100TM Data Diameter range: 120–190 mm Overall length: 163.7 mm Shank diameter: 40 mm Fine machining: 0.01 mm Weight: 5.06 kg Special features For CCMT 09T3 indexable inserts Torx T15 key; screw M3.5x9 Designed for finishing/bore machining FAQ Which insert type fits this boring tool? The boring tool THB100TM is designed for CCMT 09T3 indexable inserts and uses their standard clamping geometry to secure the cutting edge. What bore diameters can be machined with this bar? This finishing bar covers a diameter range of 120–190 mm, making it suitable for medium internal bores. What level of dimensional accuracy is achievable? Under controlled machining conditions the tool supports fine finishing down to approximately 0.01 mm, depending on machine rigidity and process parameters. How is the insert fastened to the tool? Insert retention uses a Torx system — Torx T15 key and M3.5x9 screw — ensuring repeatable and secure clamping for finishing passes. Is the tool suitable for CNC turning centres? Yes. The THB100TM is intended for industrial workshop use and integrates with conventional and CNC turning equipment for finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120mm Boring Bar for Fine Finishing for CCMT 09T3 Indexable Inserts, 93.7mm Cutting Height - Teknik Makina
The combination of precision finishing, compatibility with CCMT 09T3 indexable inserts and a rigid 40 mm shank ensures consistent surface quality and reliable clamping for high‑accuracy internal turning tasks; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Precision boring bar THB110TM by Teknik Makina — for CCMT 09T3, 120 mm The THB110TM is a precision boring bar designed for fine finishing with CCMT 09T3 indexable inserts, engineered to deliver stable cuts and superior surface integrity in medium‑duty production environments. Fine finishing compatible with CCMT 09T3 120 mm nominal diameter for versatile use 40 mm shank diameter for rigid clamping Cutting height 93.7 mm for deeper finishing passes Enhanced surface quality for final passes A focus on repeatable surface finish makes this boring bar ideal where tolerance and appearance matter. By using CCMT 09T3 indexable inserts, the system promotes consistent cutting geometry and uniform chip formation, which reduces the need for subsequent polishing. The tool’s design supports fine finishing operations by maintaining axial and radial stability, thereby decreasing tool marks and lowering scrap rates. The cutting height of 93.7 mm allows controlled engagement for finishing depths common in component manufacture. Rigidity and stability that improve cycle reliability Rigidity is central to repeatable machining results. The 40 mm shank diameter offers secure clamping in standard toolholders, reducing vibration and chatter during finishing cuts. A stiffer tool interface directly contributes to improved dimensional consistency and longer insert life. With a nominal diameter of 120 mm and a maximum cutting diameter noted at 190 mm, the tool accommodates a range of internal diameters while retaining a stable cutting platform for precision operations. Tooling economy through standard insert compatibility Acceptance of CCMT 09T3 inserts means reduced inventory complexity and straightforward replacement cycles. Indexable inserts provide fast changeovers and predictable cutting behaviour, lowering downtime and enabling efficient tool management. The modular concept supports cost‑effective maintenance: worn inserts are replaced rather than the entire holder, improving overall shop economics. Teknik Makina’s holder geometry is optimised to exploit the insert’s rake and clearance for fine turning tasks. Practical integration into workshop workflows Installation and set‑up are straightforward in production layouts that already use standard insert systems. The bar’s dimensions and shank form ensure compatibility with common turret and toolpost arrangements, simplifying retrofitting. For complex specifications or process optimisation, technical consultation is available to align the toolholder with machining parameters and insert grades. Metav Werkzeuge can advise on insert selection and cutting data to match the desired finish and cycle time targets. For tailored advice on integrating Teknik Makina’s THB110TM into production or to secure immediate supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THB110TM Manufacturer: Teknik Makina Product type: Boring bar for fine finishing Numbers Shank diameter: 40 mm Nominal diameter: 120 mm Max cutting diameter: 190 mm Cutting height: 93.7 mm eCl@ss: 21041590 Special features Compatible inserts: CCMT 09T3 Designed for fine finishing applications Label: 120mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 SKU: THB110TM FAQ Which inserts are suitable for this toolholder? The THB110TM is designed for CCMT 09T3 indexable inserts, which provide the chip control and geometry suited to fine finishing operations. What shank size is required for secure clamping? A 40 mm shank diameter is specified for the holder to ensure rigid clamping in compatible toolholders. What diameters can be machined with this boring bar? The holder has a nominal diameter of 120 mm and supports a maximum cutting diameter of 190 mm, covering a broad range of internal turning dimensions. Is the THB110TM suitable for production environments? Yes, Teknik Makina’s THB110TM is engineered for repeatable fine finishing in production settings, offering indexable insert compatibility and a robust shank for stable cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120mm Boring Tool For CCMT 1204 Indexable Inserts L208mm, D170mm - Teknik Makina
Take advantage of a compact, insert-based solution that combines precision and extended reach: the rigid tool body and compatibility with CCMT 1204 indexable inserts ensure steady bore quality and reduced downtime. For reliable procurement and advice, order the boring tool directly via Metav Werkzeuge or consult the Metav team for application support. Boring tool TKB159TM – 120 mm diameter, for CCMT 1204 indexable inserts (Teknik Makina) The boring tool TKB159TM is a purpose-built holder for CCMT 1204 indexable inserts, developed for internal turning and bore-finishing tasks in workshop and production settings. For CCMT 1204 indexable inserts 120 mm nominal diameter Overall length 208 mm Max cutting diameter 170 mm Consistent bore quality through stable design The holder’s construction prioritises stability to reduce vibration and tool deflection during internal machining, which translates into repeatable precision and improved surface finish. By using standard CCMT 1204 indexable inserts, the system separates cutting-edge wear from the tool body, enabling quick insert replacement and consistent dimensional results. This design philosophy limits scrap rates and supports predictable process capability in series production. Faster set-ups and longer productive cycles Compatibility with indexable inserts delivers a pragmatic productivity advantage: worn inserts are exchanged in moments, not hours, reducing machine idle time and lowering per-part tooling costs. The combination of a 120 mm nominal diameter and a 208 mm overall length gives sufficient reach for many internal operations while the 170 mm maximum cutting diameter provides margin for bore enlargement tasks. These measurable dimensions enable planners to match the tool to specific cycle-time and accessibility requirements, making production planning more efficient. Clear application scope and operational benefits Designed for conventional and CNC internal turning, the tool body supports routine bore finishing and enlargement tasks without complex tooling conversions. The use of indexable inserts ensures consistent cutting geometry and simplified inventory management: fewer complete tools are needed when inserts cover the wear items. As a result, workshop logistics benefit from reduced stock complexity and faster replenishment cycles, which bolsters overall throughput. Robust supply and workshop integration The straightforward insert interface and standardised geometry make integration into existing tool sets uncomplicated. The tool’s label and SKU facilitate ordering and traceability in procurement systems, supporting a controlled spare-part strategy and predictable lead times. When combined with disciplined insert-change procedures, the holder contributes to sustained machining quality and lower total cost of ownership over time. Contact Metav Werkzeuge today for tailored supply and technical advice on Teknik Makina’s TKB159TM boring tool and for assistance matching the tool to specific machining tasks. Technical data Article number: TKB159TM Label: 120mm Ausbohrwerkzeug CCMT 1204 L208mm Manufacturer: Teknik Makina ECLASS: 21181208 Product type: Boring tool Core dimensions Nominal diameter: 120 mm Max cutting diameter: 170 mm Overall length: 208 mm Features / Compatibility Compatible inserts: CCMT 1204 Category path: Zerspanen SKU: TKB159TM FAQ Which insert grade and size fits this holder? The holder uses CCMT 1204 indexable inserts; insert grade and geometry should be chosen according to the workpiece material and cutting conditions for the TKB159TM boring tool. What reach does the tool provide for internal operations? The tool offers an overall length of 208 mm, providing extended reach for many internal turning and bore-finishing applications while maintaining rigidity. What is the maximum cutting diameter achievable with this tool? The tool supports a maximum cutting diameter of 170 mm, allowing for bore enlargement tasks within that envelope. Is the tool suitable for CNC and manual lathes? Yes, the design of the holder is appropriate for both CNC and conventional lathe applications where CCMT 1204 inserts are used and the dimensional envelope fits the machine setup. How does the insert system affect workshop logistics? Using indexable CCMT 1204 inserts reduces the need for multiple dedicated cutters, simplifies spare-part management and shortens downtime during insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Boring Bar For CCMT 09T3 Inserts, 32mm Shank Diameter 115mm Cutting Length - Teknik Makina
Benefit from a rigid, indexable design with a 32 mm shank and 130 mm max cutting diameter that keeps bore-enlargement cycles stable and predictable; the combination of long cutting length and CCMT insert compatibility simplifies tooling logistics. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar TKB136TM — indexable internal boring tool, CCMT 09T3 compatible (Teknik Makina) The Boring Bar TKB136TM is an indexable internal boring tool designed for diameter enlargement and internal turning operations on CNC lathes and boring machines. CCMT 09T3 insert compatibility Max cutting diameter 130 mm 32 mm robust shank diameter 115 mm effective cutting length Greater process stability from a rigid shank geometry The combination of a 32 mm shank and a substantial overall length provides increased stiffness during internal cutting, which reduces vibration and improves surface finish on the bore. A rigid toolholder translates into fewer rework cycles and more consistent part tolerances; for shops that need repeatable bore quality, this results in measurable time savings at the inspection stage. The construction supports precise, enlarged bores while maintaining cutter life when paired with suitable carbide inserts. Faster tool changes and sustained throughput with indexable inserts Built for CCMT 09T3 indexable inserts, the tool eliminates the need for full-tool regrinding and allows quick corner changes when an edge is worn. Indexable inserts are replaceable carbide tips that restore cutting geometry in seconds, helping to keep spindle downtime to a minimum and maintain production momentum. The 115 mm cutting length enables extended reach into deeper bores without compromising rigidity, which helps to sustain stable cycle times on serial production runs. Simple integration into existing toolrooms and CNC setups With an overall length of 175 mm and a clear designation as an indexable boring bar, the unit installs easily into standard toolholders and turrets. The documented weight of 3.13 kg indicates a solid build suitable for industrial use, while the clear compatibility with CCMT 09T3 inserts reduces the need for special consumables. For procurement and planning, the article is listed under SKU TKB136TM, making stock control and reordering straightforward. Contact Metav Werkzeuge for application advice on the Teknik Makina TKB136TM and to arrange supply or tooling recommendations from our specialists Technical Data Article number: TKB136TM Manufacturer: Teknik Makina Tool type: Boring bar (indexable) Core data Max cutting diameter: 130 mm Nominal diameter: 90 mm Overall length: 175 mm Shank diameter: 32 mm Effective cutting length: 115 mm Weight: 3.13 kg Special features Compatible with CCMT 09T3 inserts Indexable insert system SKU: TKB136TM FAQ What insert type does this boring bar use? The boring bar accepts CCMT 09T3 indexable inserts; the TKB136TM is designed for quick insert changes to reduce downtime. What is the maximum cutting diameter achievable with this tool? The tool supports a max cutting diameter of 130 mm, suitable for enlarged internal diameters within that range. What are the key dimensions for integration into a turret or holder? Important dimensions include a 32 mm shank diameter, 175 mm overall length, and 115 mm effective cutting length; these figures help determine holder compatibility for the TKB136TM. Is the tool suitable for deep-bore operations? The 115 mm cutting length offers extended reach for moderate depth bores while maintaining stiffness; deeper-bore requirements should be reviewed with tooling specialists. How is spare-part and reorder identification handled? Reorders and spare parts can be referenced using the SKU TKB136TM, which simplifies inventory tracking and procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Boring Bar for Fine Finishing for CCMT 09T3 Indexable Inserts, L220mm - Teknik Makina
Take advantage of the combination of precise finish capability and standardised insert compatibility to streamline internal turning operations; the robust 130 mm tool body and generous 220 mm reach deliver controlled machining for medium-to-large bores. Order or request guidance via Metav Werkzeuge for reliable supply and application support. THB130TM Boring Tool for Fine Machining – 130 mm, CCMT 09T3 (Teknik Makina) The THB130TM is a precision boring tool designed for fine internal machining, compatible with CCMT 09T3 indexable inserts for consistent finish and repeatability. 130 mm tool diameter Compatible with CCMT 09T3 inserts Overall length 220 mm Max cutting diameter 190 mm Consistent finish and dimensional control for internal bores A tool tailored for fine machining delivers measurable benefits in surface quality and tolerance adherence. The THB130TM is configured around a stable 130 mm body and a 220 mm overall length, providing the reach and rigidity required for controlled internal cutting. The specification of a 190 mm maximum cutting diameter and cutting height 150 mm helps to achieve predictable set-up outcomes, reducing trial cuts and rework. For teams focused on repeatability, the combination of robust geometry and standard insert clamping supports a reliable machining process. Faster set-up and fewer interruptions in production Using an indexable insert system significantly reduces downtime compared with solid-tool regrinds. Compatibility with CCMT 09T3 indexable inserts means insert change is straightforward, restoring cutting edges in minutes and keeping throughput high. The tool’s design enables quick clamping and secure seating of the insert, which translates into shorter tool-change cycles and improved machine utilisation — a clear efficiency gain for serial production and mixed-batch work. Simplified logistics through standardised insert use Standardising on widely available CCMT 09T3 indexable inserts simplifies inventory and purchasing. The adoption of a common insert type reduces the number of spare items required in the tool crib and lowers the risk of stock-outs. For procurement and shop-floor managers, this standardisation supports smoother supply chains and predictable maintenance planning while maintaining the option to select insert grades specific to the workpiece material. Built for workshop reliability and clean tool management The holder’s dimensions and construction focus on stable clamping and straightforward handling to protect cutting edges and maintain alignment during operation. A well-engineered boring tool reduces vibration and supports better surface finishes without extensive operator intervention. Supplied by Teknik Makina, the product aligns with workshop demands for tools that are easy to fit, simple to service and compatible with established insert systems, helping to keep manufacturing schedules on track. For tailored technical advice, application recommendations or to arrange delivery from Metav Werkzeuge’s Emmerich centre, contact our team via info@metav-werkzeuge.com or call +49 2822 7131930 — assistance for selection and supply is available promptly. Technical data Article number: THB130TM Manufacturer: Teknik Makina ECLASS: 21041590 Product type: Boring tool for fine machining Facts Diameter: 130 mm Overall length: 220 mm Max cutting diameter: 190 mm Cutting height: 150 mm Design & compatibility Compatible inserts: CCMT 09T3 Indexable insert system SKU: THB130TM FAQ Which insert type fits this tool? The tool accepts CCMT 09T3 indexable inserts; this insert standard is specified for the THB130TM boring tool from Teknik Makina. What bore sizes can be machined with this boring tool? With a 130 mm tool body and a 190 mm maximum cutting diameter, the THB130TM is intended for medium-to-large internal bores within those dimensional limits. How long is the tool and what reach does it provide? The overall length of the holder is 220 mm, giving extended reach for deeper internal machining compared with shorter holders. Is this tool suitable for finishing operations? Yes — the THB130TM is specified for fine machining and is designed to support consistent surface finishes when used with suitable CCMT 09T3 grades. Where can replacement inserts or technical guidance be obtained? Replacement inserts compatible with CCMT 09T3 and further technical guidance are available through Metav Werkzeuge; the THB130TM is supported by the supplier’s product information. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Boring Tool For CCMT 09T3 Inserts, 32mm Shank 165mm Cutting Length, 225mm Overall - Teknik Makina
Take advantage of the combination of stable clamping, indexable-insert flexibility and long reach to reduce cycle times and tooling costs; order directly via Metav Werkzeuge or consult their technical advisors for specification matching. Ausbohrwerkzeug — indexable boring tool, compatible with CCMT 09T3, max Ø 130 mm | Teknik Makina The Ausbohrwerkzeug is a precision indexable boring tool designed for enlarging and finishing internal bores where extended reach and repeatable results are required *Indexable design for CCMT 09T3 inserts *Max cutting diameter 130 mm *32 mm robust shank for stable clamping *Total length 225 mm for deep reach Fewer tool changes thanks to indexable inserts and defined cutting range The holder accepts CCMT 09T3 indexable inserts, which allow rapid re-setting of cutting geometry without replacing the entire tool body. This indexable inserts approach reduces downtime and lowers per-operation cost compared with solid tools. With a max cutting diameter of 130 mm, the system covers a broad range of internal boring tasks while maintaining precision through repeatable insert positioning and secure clamping. Stable machining from a robust shank and mass A 32 mm shank and a total mass of 4.138 kg contribute to high rigidity during cutting, reducing chatter and improving surface finish on bored bores. The combination of a thick shank and substantial weight increases dampening at the cutting zone, so feeds and speeds can be optimised for productivity without compromising dimensional accuracy. The resultant stability supports consistent tolerances across serial production. Extended reach for deep internal operations with controlled cutting length The assembly provides a cutting length of 165 mm and an overall length of 225 mm, enabling access to deeper bores while keeping overhang to a manageable level. Longer reach is paired with a design that maintains alignment, so finishing passes remain effective and setup time is minimised. The tool is therefore suited to workflows where accessibility and retained concentricity are priorities. Maintenance efficiency and inventory benefits from replaceable inserts By using replaceable inserts, wear is isolated to small, low-cost components while the main body remains in service. This simplifies stock management and lowers tooling expenditure over time: only worn inserts need replacement rather than entire bars. The indexable format also permits rapid visual checking and fast changeovers, supporting tight production schedules and predictable maintenance intervals. For tailored advice on suitability for specific machines or components, contact Metav Werkzeuge for a specification review at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on insert choices, clamping solutions and delivery options Technical data Article number: TKB138TM Manufacturer: Teknik Makina Name: Ausbohrwerkzeug Suitable for inserts: CCMT 09T3 Facts Max cutting diameter: 130 mm Nominal diameter: 90 mm Shank diameter: 32 mm Cutting length: 165 mm Total length: 225 mm Weight: 4.138 kg Special features For indexable inserts CCMT 09T3 Indexable boring tool design SKU: TKB138TM FAQ What insert type is compatible with this boring tool? The boring tool is compatible with CCMT 09T3 indexable inserts, allowing rapid insert replacement and consistent cutting geometry. What is the maximum cutting diameter achievable with this tool? The assembly supports a max cutting diameter of 130 mm, suitable for enlarging and finishing medium-to-large internal bores. Which dimensions determine clamping stability? Clamping stability is primarily influenced by the 32 mm shank diameter and the overall mass (4.138 kg), which together reduce vibration and improve cutting stability. How long is the cutting reach for deep bores? The effective cutting length is 165 mm with a total tool length of 225 mm, offering extended reach while maintaining alignment for finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14-24mm Cartridge for Boring Tool Set CCMT 0602, T8 Torx Screw - Teknik Makina
Take advantage of a compact cartridge engineered for precise internal boring across a 14–24 mm range, compatible with CCMT 0602 indexable inserts and secured via a Torx T8 system; order the Cartridge 14–24mm for Boring Tool (THB04TM) directly via Metav Werkzeuge or ask our consultants if needed Cartridge 14–24mm for Boring Tool (THB04TM) — Boring tool cartridge by Teknik Makina A Cartridge 14–24mm for Boring Tool created for accurate internal boring in production and workshop environments, designed to take CCMT 0602 indexable inserts Cartridge 14–24 mm range Compatible with CCMT 0602 inserts Torx T8 retention system Secured with M2.5×4.7 Torx screw Consistent bore quality with indexable inserts The cartridge is built to ensure repeatable accuracy when machining internal diameters between 14–24 mm. By accepting CCMT 0602 indexable inserts, the module enables straightforward replacement of cutting edges without altering the holder alignment, which reduces downtime and maintains consistent bore geometry. For customers less familiar with insert codes: CCMT 0602 denotes a square insert with a 0.6 mm nose radius suitable for fine finishing and light roughing, offering a balance between edge strength and surface finish. Secure retention for fast, reliable tool changes Retention is handled with a Torx T8 key and a Torx screw sized M2.5×4.7, delivering a secure clamping method that resists loosening under cutting forces. This arrangement shortens set‑up time and keeps insert seating precise—important where cycle times are tight and part tolerances are critical. The compact fastener geometry also supports confident torque application, helping to avoid over‑ or under‑tightening and preserving tool life and component quality. Practical benefits for workshops and production lines As a component of a dedicated boring tool set, this cartridge streamlines tool management and cutting strategy. The combination of a clearly defined diameter range and standard insert compatibility reduces the need for specialised tooling stocks and simplifies inventory. Used in small series production or maintenance operations, it supports efficient changeovers and consistent results, contributing to overall productivity and fewer scrapped parts. For additional technical data or to confirm fitment in specific toolholders, further specifications can be provided on request via the contact details below. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina Cartridge 14–24mm for Boring Tool (THB04TM) into existing tooling systems or to request detailed drawings and availability Technical data Article number: THB04TM E-class: 21041590 Manufacturer: Teknik Makina Name: Cartridge 14–24mm for Boring Tool Facts Diameter range: 14–24 mm Torx key: T8 Torx screw: M2.5×4.7 Compatible inserts: CCMT 0602 Special features For boring tool sets Accepts CCMT 0602 indexable inserts Retention via Torx T8 and M2.5×4.7 screw FAQ What insert type does this cartridge accept? The cartridge is designed for CCMT 0602 indexable inserts, enabling easy edge replacement without altering holder set‑up. Which diameter range does the cartridge cover? The cartridge covers a 14–24 mm internal bore range suitable for small to medium internal turning tasks. How is the insert secured in the cartridge? Insert retention is achieved with a Torx T8 key and an M2.5×4.7 Torx screw to ensure stable clamping during operation. Is this cartridge compatible with standard boring tool holders? This cartridge is intended for use within compatible boring tool sets; confirm holder dimensions against the Cartridge 14–24mm for Boring Tool (THB04TM) specifications for fitment. Can the cartridge be used for finishing operations? Yes — when equipped with the appropriate CCMT 0602 insert geometry, the cartridge supports finishing passes that demand good surface quality and dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Bar For CCMT 0602 Inserts, 16mm Shank 102mm Cutting Length - Teknik Makina
Benefit from precise internal boring with a compact, rigid design and compatibility with industry-standard indexable inserts. The 16 mm shank and 150 mm overall length provide stable clamping and reach for small to medium bores, while the tool’s compatibility with CCMT 0602 inserts delivers economical edge changes and consistent cutting performance. Order the TKB096TM directly via Metav Werkzeuge or contact the consultants for tailored advice. Boring tool TKB096TM — internal boring bar, Ø19 mm, for CCMT 0602 The boring tool TKB096TM is engineered for precision internal machining in CNC turning and lathe operations, offering compact reach and compatibility with standard indexable inserts. Compact 150 mm overall length 16 mm shank for rigid clamping Compatible with CCMT 0602 inserts Precise boring with controlled cutting diameter The design focuses on predictable material removal: a defined cutting diameter of up to 23 mm and a nominal body diameter of 19 mm make the tool suitable for finishing and light roughing of internal bores. Using indexable inserts reduces downtime for edge changes and keeps running costs controllable; the insert pocket accepts the common CCMT 0602 geometry, which is widely stocked and simple to replace. These features support repeatable results in series production and small-batch work alike. Rigid clamping for stable machining results A 16 mm shank delivers a compact clamping interface that improves torsional stiffness compared with longer, thinner holders. The reduced overhang and optimised mass distribution lower vibration risk, which helps maintain surface finish and dimensional accuracy. For operations requiring consistent concentricity, the combination of a short effective length and a stout shank contributes directly to improved machining stability. Cutting length and reach balanced for versatility With a cutting length of 102 mm and an overall length of 150 mm, the tool provides sufficient reach for many internal operations without excessive overhang. This balance between reach and rigidity makes the holder suitable for components where access is limited but positional accuracy remains critical. The geometry supports light to moderate depth of cut while preserving tool life through more uniform load distribution. Economical indexable-insert system Compatibility with CCMT 0602 inserts allows the use of a wide range of carbide grades and coatings available on the market, enabling adaptation to different materials and cutting speeds. The indexable system reduces tooling costs by allowing only the insert to be replaced when worn, rather than the entire bar. For workshops seeking predictable maintenance cycles and fast turnaround, this approach minimises inventory complexity and keeps machine downtime low. Application scope and material guidance The holder is intended for internal boring tasks on small to medium-sized parts where accuracy and surface quality are priorities. Typical applications include finishing of bores in alloys and steels where the chosen insert grade and cutting parameters are matched to the workpiece material. The modular insert format supports quick adaptation: a harder grade for high-speed finishing or a tougher grade for interrupted cuts. Practical handling and workshop integration Weighing approximately 0.292 kg, the tool is light enough for easy handling during tool changes yet substantial enough to provide stable cutting conditions once clamped. The compact dimensions simplify storage and tool-holding logistics on the shop floor. Where process planning emphasises repeatability, the holder’s standardised interface with common insert types streamlines set-up and reduces the need for specialised spares. For a reliable internal boring solution from Teknik Makina, request the TKB096TM through Metav Werkzeuge — Metav’s consultants in Emmerich are available to advise on insert grades and clamping options at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TKB096TM Manufacturer: Teknik Makina Article name: Ausbohrwerkzeug Core data Max cutting diameter: 23 mm Nominal diameter: 19 mm Shank diameter: 16 mm Cutting length: 102 mm Overall length: 150 mm Weight: 0.292 kg Special features Compatible with CCMT 0602 inserts Indexable-insert boring design Compact shank for rigid clamping FAQ What insert type does the tool accept? The TKB096TM accepts CCMT 0602 indexable inserts, a widely used format that allows quick edge changes and access to multiple carbide grades. Which maximum bore diameter can be machined with this holder? The holder supports a maximum cutting diameter of 23 mm, while the nominal body diameter is 19 mm. Is the shank size suitable for standard toolholders? Yes, the 16 mm shank is designed for rigid clamping in standard small-shank toolholders, providing improved stability for internal operations. For which machining tasks is this boring bar best suited? The tool is designed for precision internal boring and finishing on small to medium parts, where dimensional accuracy and surface quality are important. How heavy is the tool and how does that affect handling? At approximately 0.292 kg, the tool is lightweight for manual handling yet offers sufficient mass for stable cutting once clamped in the turret or holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Bar For Fine Finishing CCMT 0602, 0.01mm Resolution - Teknik Makina
Achieve repeatable fine finishing with a robust boring solution that accepts standard CCMT 0602 inserts and delivers consistent results to 0.01 mm. Order this tool directly via Metav Werkzeuge or consult our specialists for an installation and application review. Boring bar for fine finishing — compact finishing tool, 50 mm cutting diameter, accepts CCMT 0602 The Boring bar for fine finishing is designed for precision metalworking and fine-bore operations in small-series production and toolroom environments, combining a rigid shank and standard insert compatibility for predictable surface quality. Fine finishing down to 0.01 mm Suitable for CCMT 0602 inserts Maximum cutting diameter 50 mm Robust 25 mm shank, 165 mm overall length Predictable surface quality and what 0.01 mm means for production For finishing operations, control over dimensional and surface tolerances is crucial. The tool’s ability to achieve a 0.01 mm finish tolerance reduces rework and minimises scrap by producing consistent bore geometry on each pass. That level of accuracy is especially beneficial in precision engineering, where mating parts must meet tight clearances; the combination of a stable toolholder and a controlled cutting length ensures a smoother finish and lower vibration during machining. Explaining the figure: 0.01 mm refers to achievable machining repeatability under appropriate process parameters, indicating the tool’s suitability for high-precision finishing cycles. Compatibility with standard inserts and a construction that reduces vibration Designed to accept CCMT 0602 indexable inserts, the machining system simplifies inventory and tool change routines while enabling fast reconditioning of the cutting edge. The bar’s 25 mm shank and substantial overall length of 165 mm provide rigidity for off-centre operations and improved chatter resistance compared with slender holders. A maximum cutting diameter of 50 mm and a cutting-shank length of 109 mm allow access to moderate-depth bores while maintaining stiffness. Using standard inserts supports predictable cutting behaviour and easier procurement for production environments. Practical benefits for set-up time and repeatability on the shop floor A straightforward clamping concept and compatibility with well-known insert geometries shorten tool set-up and replacement cycles. The moderate mass (approx. 1.085 kg) and well-balanced geometry contribute to steadier rotation and reduced need for frequent re-adjustments, which in turn saves operator time between jobs. For batch production and short runs, the tool’s stable performance provides reliability over repeated set-ups, supporting efficient process planning and consistent part quality without complex adjustments. Recommended applications and typical users This finishing boring solution is aimed at precision engineering shops, maintenance workshops and small-scale production lines where repeatable finish and dimensional control matter. Typical applications include final bore sizing, bearing seat finishing and stepped bore finishing where a reliable surface and tight tolerance are required. The tool is compatible with standard machining centres and lathes that accept indexable insert tooling and benefits teams looking to reduce tool complexity while preserving finish quality. Contact Metav Werkzeuge for a tailored application review of Teknik Makina’s boring bar — our team in Emmerich can advise on insert choices, set-up and compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: THKB134TM Manufacturer: Teknik Makina ECLASS: 21041590 Facts Maximum cutting diameter: 50 mm Finish capability: 0.01 mm Shank diameter: 25 mm Cutting length (shank): 109 mm Overall length: 165 mm Weight: 1.085 kg Special features For indexable inserts CCMT 0602 Intended application: fine finishing Diameter (d): 40 FAQ What level of finish can be expected with this boring bar? The boring bar for fine finishing is specified for repeatable results to 0.01 mm, delivering a controlled surface quality when used with appropriate inserts and machining parameters. Which inserts are compatible with the tool? Compatibility is provided for CCMT 0602 indexable inserts; Teknik Makina’s design accepts these standard inserts for easy replacement and predictable cutting performance. Is the tool suitable for small-batch production? Yes, the tool’s rigidity, standard insert use and straightforward clamping make it well suited to small-batch production and toolroom finishing tasks. What are the key dimensions to check before ordering? Important dimensions include a maximum cutting diameter of 50 mm, a 25 mm shank and an overall length of 165 mm (SKU THKB134TM), which determine fitment and access in the machine setup. Can this boring solution be used for stepped bores and bearing seats? The design supports fine finishing of stepped bores and bearing seats when combined with the correct insert geometry and cutting parameters; Teknik Makina’s configuration is optimised for those tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Tool Body For Boring Tool, Precision - Teknik Makina
Take advantage of the clear identification and system compatibility of this component: a dedicated body for a boring tool set that ensures straightforward replacement and rapid stock matching by SKU. Order the part directly via Metav Werkzeuge or consult the team for application checks. Body for Boring Tool Set — Teknik Makina THB02TM The Body is the main component for a boring tool set, intended to serve as a replaceable module in internal turning and boring assemblies. Replacement body for boring tool sets Compatible with Teknik Makina tooling SKU THB02TM for quick identification Seamless integration into boring tool assemblies for consistent machining results As a modular component of a boring tool set, this tool body is designed to integrate with standard tool-holding arrangements used in internal turning operations. The component provides a defined mounting interface and enables repeatable positioning of the cutting head within the assembly, which supports stable cutting geometry and reliable centreline alignment. By focusing on secure mechanical fit and clear identification, the module helps maintain process stability in serial and batch production environments. Clear identification and system matching to reduce downtime The article is listed under eClass 21041590 and carries the unmistakable identifier THB02TM, which aids rapid ordering and inventory control. Labelling consistency and a retained SKU mean components are easier to locate in supply portals and to match against spare-parts lists. For procurement and maintenance planners, straightforward part identification reduces lead times and minimises the risk of fitting incorrect modules into an existing tool assembly. Practical advantages for workshop efficiency and maintenance planning A standardised holder component simplifies servicing routines: when a worn or damaged element is removed, a matching replacement can be fitted without complex modification. This reduces machine idle time and lowers the administrative effort required for spare management. The use of a recognisable component from Teknik Makina supports harmonisation of tool inventories across multiple machines and sites, assisting planners in keeping spares consistent and maintenance windows predictable. Documentation and verification for correct assembly Two documents are attached to the product record to support identification and verification during fitment. The record supports verification steps such as confirming the SKU and the intended application before installation, and it clarifies how the part interfaces with a larger boring assembly. For setups that demand traceability, the retained identifiers and attachments aid record keeping and quality assurance without introducing ambiguity. Contact Metav Werkzeuge to confirm compatibility details and secure the Teknik Makina THB02TM module for prompt integration into existing boring tool sets — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical details Article number: THB02TM Designation: Body for Boring Tool Manufacturer: Teknik Makina eClass: 21041590 Core data Attachments: 2 files Special features Intended application: for boring tool set UID: THB02TM Brand: Teknik Makina FAQ What is the SKU for this component? THB02TM is the SKU used to identify the body for the boring tool set. Who manufactures this module? This component is supplied by Teknik Makina and carries the corresponding manufacturer designation. For which application is the component intended? The part is intended for use within a boring tool set, serving as the principal body or holder module. Where can the product classification be found? The product is categorised under eClass 21041590. Are there attachments or documents available for this item? Two files are attached to the product record to support identification and verification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Tool Finish, Precision Fine Turning, High Accuracy - Teknik Makina
Benefit from a combination of precision surface results and robust workshop-ready design: the tool ensures consistent fine boring performance and reliable handling during finishing operations. Order the 9-130 Boring Tools Finish directly via Metav Werkzeuge or ask our consultants if needed. 9-130 Boring Tools Finish — Fine finishing boring tool by Teknik Makina, precision‑focused The 9-130 Boring Tools Finish is a precision boring tool for fine internal machining, designed to deliver improved surface quality and consistent geometry in industrial workshop applications. Fine finishing for internal bores Solid construction, consistent repeatability Suitable for industrial workshop use Achieve consistent fine finishes with controlled material removal A finishing bore operation prioritises surface quality and dimensional accuracy over bulk material removal. The 9-130 model is engineered to support those objectives by promoting a consistent cutting action and minimising chatter. This leads to a superior surface finish and reduced need for secondary correction, which in turn lowers overall rework rates and improves process reliability. For production environments where finish and tolerance retention matter, a dedicated finishing tool like this supports tighter machine-to-machine uniformity and predictable outcomes. Stable design for repeatable results on the shop floor Stability and rigidity are key to repeatable finishing performance. The tool’s compact mass contributes to mechanical stability, reducing vibration during low‑depth passes and enabling steadier tool engagement with the workpiece. That steadiness helps maintain form and roundness in internal bores and supports consistent dimensional control across batches. In practical terms, fewer rejects and less in-process measurement are needed when the tool performs repeatably, which supports leaner workflows in a busy workshop environment. Seamless integration and dependable sourcing for production continuity Adopting precision finishing tooling is only part of the equation; reliable supply and clear product identification matter equally. The tool is supplied with a distinct SKU for straightforward procurement and inventory management, and its industrial design makes it suitable for inclusion in standard tool cabinets and holders. Working through an experienced partner ensures access to consistent product versions and delivery practices that protect the production schedule. For companies streamlining supplier lists, a dependable finishing tool reduces procurement complexity while safeguarding process quality. Discuss Teknik Makina finishing solutions with Metav Werkzeuge and secure a reliable supply channel for your workshop requirements; Metav Werkzeuge can advise on selection and delivery from Emmerich. Technical data Article number: THB120TM Eclass: 21041590 Manufacturer: Teknik Makina Facts Weight: 1.155 kg Special features Fine finishing boring tool Label: Ausdrehwerkzeug für die Feinbearbeitung SKU: THB120TM FAQ What is the primary purpose of this tool? The tool is intended for fine internal finishing operations where surface quality and dimensional control are prioritised. How does this tool differ from a roughing boring tool? This finishing tool emphasises controlled material removal and stability to produce improved surface integrity and closer dimensional tolerances than tools designed for roughing. What identifying data is provided for ordering and inventory? The product is listed under SKU THB120TM and is classified with Eclass 21041590. Which production environments benefit most from this tool? Industrial workshops and production lines requiring consistent internal bore quality and minimal secondary finishing work will find this tool particularly valuable. How does tool stability affect final part quality? Greater stability reduces vibration and chatter during finishing passes, which directly improves roundness, surface finish and repeatability across multiple parts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Tool For CCMT 0602 Inserts, 28mm Cutting Diameter, 20mm Shank - Teknik Makina
Combine high rigidity with insert flexibility for reliable internal machining: the solid 20 mm shank, 100 mm cutting length and compatibility with CCMT 0602 indexable inserts deliver precise bore finishes and reduced setup time; order the tool via Metav Werkzeuge or consult their specialists for application advice. TKB102TM — Teknik Makina internal boring bar, CCMT 0602, Ø23 mm The TKB102TM is an internal boring bar engineered for precision CNC internal turning and boring operations, designed to accept CCMT 0602 indexable inserts for efficient workshop integration. Compatible with CCMT 0602 inserts Cutting diameter up to 28 mm 100 mm effective cutting length Solid 20 mm tool shank Stable machining for precise bore tolerances The TKB102TM combines a 20 mm shank with a compact overall length to provide high rigidity during internal machining. A rigid toolholder reduces vibration and tool deflection, which directly improves roundness and surface finish on internal bores. The specified Ø23 mm diameter and low mass (0.347 kg) keep inertial loads manageable while maintaining stability at moderate spindle speeds. For operations where dimensional accuracy matters, the reduced runout risk leads to fewer reworks and more consistent production runs. Insert compatibility that speeds up setup and reduces costs Acceptance of the CCMT 0602 indexable inserts makes the boring bar an economical choice for shops that favour quick insert changes. Indexable inserts allow repeated tool reuse with consistent geometry; when a cutting edge wears, a fresh insert restores performance without regrinding solid tooling. This configuration reduces downtime and tooling costs while keeping cutting parameters repeatable. For those new to insert systems: indexable inserts are small, replaceable cutting tips available in a range of grades and coatings suited to different materials. Durable geometry for consistent cycle times A 100 mm cutting length paired with a 150 mm overall length gives useful reach for deeper bores while keeping the tool compact enough for stable clamping. The combination of cutting length and shank diameter is designed to balance access and stiffness, which helps maintain cycle times by allowing slightly more aggressive feeds without compromising accuracy. Where reach is required, this geometry can reduce the need for intermediate setups, aiding throughput in small to medium series production. Practical applications and workshop fit Primarily intended for internal turning and boring on CNC lathes, this boring bar suits finishing and mid-depth boring tasks where indexable insert technology offers the best compromise between cost and accuracy. The tool’s compatibility with standard CCMT inserts simplifies inventory management and enables rapid tool changes on the shop floor. For optimal results, pair the bar with a rigid toolholder and ensure correct insert grade selection for the workpiece material and cutting conditions. For ordering or tailored technical advice on application and insert selection, contact Metav Werkzeuge — Metav’s specialists can advise on tooling setup and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKB102TM Manufacturer: Teknik Makina ECLASS: 21181208 Facts Cutting diameter (max): 28 mm Nominal diameter: 23 mm Overall length: 150 mm Cutting length: 100 mm Shank diameter: 20 mm Weight: 0.347 kg Special features For indexable inserts: CCMT 0602 Solid shank design Suited to internal boring on CNC lathes FAQ What insert type does this boring bar accept? The TKB102TM accepts CCMT 0602 indexable inserts, a common format that supports quick edge changes and a wide range of grades for different materials. What are the key dimensions of the tool? Key dimensions are an overall length of 150 mm, a cutting length of 100 mm and a shank diameter of 20 mm, providing a balance of reach and rigidity for internal machining. What maximum bore diameter can be machined? The tool is specified for cutting diameters up to 28 mm, with a nominal diameter reference of 23 mm for typical applications. Is the tool suitable for deep internal bores? The 100 mm cutting length makes the TKB102TM suitable for moderate-depth internal bores; for much deeper operations, evaluate tool overhang and clamping to maintain rigidity. Which materials are recommended for use with this boring bar? Material selection depends on insert grade; the TKB102TM itself is compatible with standard CCMT insert grades, so choose inserts optimised for the target material and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Tool With WCMX 0302 Inserts, 16mm Shank 102mm Cutting Length - Teknik Makina
Take advantage of the combination of compact dimensions, high rigidity and insert compatibility for reliable internal boring operations; order the tool via Metav Werkzeuge or consult our specialists for application advice. TKB090TM Internal boring bar — 16 mm shank, for WCMX 0302 inserts (Teknik Cutting Tools) The TKB090TM is a precision internal boring bar designed for medium-depth bores in turning and milling centres, combining a compact 16 mm shank with indexable-insert compatibility for efficient, repeatable machining. Solid 16 mm shank for rigid clamping Compatible with WCMX 0302 indexable inserts 102 mm effective cutting length for deep bores Increased productivity through predictable geometry and compatible inserts The tool holder delivers a clear performance edge by pairing a 16 mm shank with a maximum workable cutting diameter of 20 mm, ensuring consistent engagement in confined internal bores. The combination of a compact profile and 102 mm cutting length permits access to deeper cavities while preserving clamping stability. Predictable geometry reduces setup time and scrap rates, so cycle times can be shortened without sacrificing surface quality or concentricity. The modest mass of 0.237 kg contributes to lower centrifugal stress at higher spindle speeds, improving tool life and process stability. Cost-efficient machining with indexable inserts and straightforward maintenance Designed for use with WCMX 0302 indexable inserts, the bar enables rapid insert changes and economical reconditioning compared with solid-cartridge cutters. Indexable inserts mean less downtime for re‑grinding and a lower per‑cutting-edge cost, a practical advantage in batch production. The holder’s plain-interface design simplifies insert seating and torqueing, improving repeatability of edge positioning and reducing the need for frequent adjustments. This approach supports both small workshops and production lines that require sensible total cost of ownership and easy shopfloor handling. Practical applications, compatibility and workshop benefits Ideal for internal finishing and semi‑rough boring tasks on lathes and machining centres, the bar suits operations where space is limited but precision remains essential. The overall length of 150 mm and the effective cutting reach support a wide range of component geometries while the rigid shank aids vibration damping for improved surface finish. As a specialist tool for metalworking professionals, the design focuses on reliable clamping, simple insert availability and minimal maintenance intervals — all factors that contribute to steady production throughput and fewer unscheduled interruptions. For application recommendations or to secure reliable supply from Emmerich, contact Metav Werkzeuge for the Teknik Cutting Tools TKB090TM — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKB090TM Manufacturer: Teknik Makina Product type: Internal boring bar Facts Maximum cutting diameter: 20 mm Shank diameter: 16 mm Effective cutting length: 102 mm Overall length: 150 mm Weight: 0.237 kg Special features Compatible with WCMX 0302 indexable inserts Suitable for internal boring applications SKU: TKB090TM Supplier line: Teknik Cutting Tools FAQ What insert type fits this boring bar? The bar accepts WCMX 0302 indexable inserts as specified for the Teknik Cutting Tools TKB090TM, enabling quick edge changes. What is the maximum bore diameter achievable? The holder is specified for a maximum cutting diameter of 20 mm, suitable for medium-size internal bores. Which shank size is required for proper clamping? A 16 mm shank provides rigid clamping and compatibility with standard collets and toolholders on small to mid-size machines. How deep can the tool reach reliably? With an effective cutting length of 102 mm and an overall length of 150 mm, the TKB090TM is intended for deeper internal bores while maintaining stability. Is this tool suitable for high‑speed machining? The low mass and compact geometry support stable performance at elevated spindle speeds; final suitability will depend on machine capability and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cartridge for Boring Tool 120-170 CCMT 1204, Standard - Teknik Makina
Take advantage of a precision fit and rapid replacement cycle to maintain steady machining output; the cartridge offers secure seating for CCMT 1204 inserts and straightforward exchange to reduce downtime — order via Metav Werkzeuge or consult their specialists for compatibility advice. Cartridge KR119TM — Cartridge for Boring Tool 120-170 CCMT 1204 (Teknik Makina) The Cartridge KR119TM is a replacement insert cartridge for the boring tool 120-170 CCMT 1204, engineered to ensure stable insert seating and consistent performance in turning and boring applications. Precision fit for CCMT 1204 holders Durable design for repeatable positioning Quick replacement to reduce downtime Secure seating for consistent parts quality The replacement insert is designed to deliver a precision fit that reduces micro-movement at the cutter interface, improving repeatability and part accuracy. A reliably seated CCMT 1204 insert lowers the risk of chatter and dimensional drift during extended cycles, which supports tight tolerance work. For workshops that depend on consistent batch quality, the stable insert interface translates directly into fewer reworks and more predictable inspection results. Faster tool changes to keep production flowing Optimised for quick exchange, the cartridge enables rapid replacement of worn inserts, which shortens machine idle time and improves production uptime. Clear compatibility with the 120–170 boring range and the CCMT 1204 insert format streamlines inventory management for tooling spares. By reducing changeover duration, the insert solution supports leaner process flows and contributes to measurable efficiency gains on the shop floor. Built to withstand workshop conditions Constructed for robust service, the cartridge emphasises secure clamping and mechanical stability under typical turning loads. The combination of precise seating and durable design helps to maintain cutting geometry over prolonged use, reducing the frequency of positional checks. Routine inspection and correct mounting ensure the cartridge continues to deliver reliable performance, supporting both one-off jobs and repetitive production runs. For a precision replacement insert from Teknik Makina, contact Metav Werkzeuge for local supply and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KR119TM Product: Cartridge for Boring Tool 120-170 CCMT 1204 Manufacturer: Teknik Makina Core data Compatibility range: 120–170 Compatible insert: CCMT 1204 SKU: KR119TM Special features Precision fit for insert seating Quick replacement insert Designed for stable clamping in boring tool FAQ Is the cartridge compatible with my 120–170 boring setup? The Cartridge KR119TM from Teknik Makina is specified for use with the boring tool 120-170 CCMT 1204 and accepts CCMT 1204 inserts for correct seating. Which insert format is required for this cartridge? This cartridge is designed specifically for the CCMT 1204 insert format, enabling secure seating and standardised replacement procedures. How does the cartridge influence machining accuracy? By providing a precision-fit seating for the CCMT 1204 insert, the Cartridge KR119TM reduces micro-movement and improves repeatability, which helps to maintain dimensional accuracy over longer runs. Is the cartridge suitable for continuous production use? The cartridge is built for stable clamping under normal turning and boring loads and supports routine changeovers to limit downtime in continuous production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cartridge for Boring Tool 170-250 CCMT 1204, Precision - Teknik Makina
Benefit from the precise fit and secure insert retention of the Teknik Cutting Tools cartridge KR120TM, compatible with the Boring Tool 170–250 CCMT 1204. Its robust construction and accurate seating reduce tool change time and support repeatable machining quality. Order the cartridge directly via Metav Werkzeuge or ask our consultants for technical advice. Cartridge KR120TM — insert carrier for Boring Tool 170–250 CCMT 1204 (Teknik Makina) The Cartridge KR120TM is a compact insert carrier engineered for CCMT 1204 bore tooling, offering a secure mounting interface and reliable performance in turning and boring applications across the 170–250 range Secure insert retention for CCMT 1204 Precision fit for 170–250 boring range Manufactured by Teknik Cutting Tools Reduced downtime through dependable insert retention A consistent clamping interface is a direct contributor to higher machine utilisation. This cartridge delivers secure insert retention and a repeatable seating position, which means fewer unplanned tool changes and more predictable cycle times. The result is tangible productivity: less operator intervention, reduced scrap risk and steadier surface finishes. For workshops seeking measurable gains in throughput, the controlled fit of this component supports tighter process windows and predictable tool life. Seamless compatibility with CCMT 1204 tooling systems Designed specifically for CCMT 1204-style inserts and the 170–250 boring range, the component simplifies integration into existing toolholders and toolposts. The geometry ensures correct orientation of the cutting edge and consistent chip evacuation, which helps maintain cutting performance across varied workpiece materials. The technical concept is straightforward: a precisely manufactured carrier that aligns inserts reliably, reducing setup time and eliminating guesswork when replacing worn tips or switching grades. Proven sourcing and operational confidence for the workshop Sourcing from a recognised manufacturer and a trusted distributor reduces procurement risk. The Teknik Cutting Tools origin signals industrial production standards, while Metav Werkzeuge acts as a European quality filter and logistics partner. This combination provides supply reliability and practical guidance for specification checks. For operations that rely on continuous production, that peace of mind translates into stable inventory management and a dependable parts supply chain. Contact Metav Werkzeuge for tailored technical guidance and to confirm fitment of the Teknik Cutting Tools cartridge KR120TM for the Boring Tool 170–250 CCMT 1204; assistance is available from Metav Werkzeuge’s Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: KR120TM Name: Cartridge Compatible with: Boring Tool 170–250 CCMT 1204 Manufacturer: Teknik Makina Core specifications Bore range: 170–250 SKU: KR120TM UID: KR120TM Materials & features Compatible with CCMT 1204 inserts Designation: Cartridge Brand: Teknik Cutting Tools FAQ What is the primary application of this cartridge? The cartridge is an insert carrier intended for bore tooling, specifically matched to CCMT 1204 inserts and the 170–250 boring range; KR120TM provides the seating geometry required for consistent cutting performance. Will the cartridge fit other CCMT holders? Compatibility depends on the holder design; the KR120TM is built for the Boring Tool 170–250 CCMT 1204 family and is optimised for that interface. Can the cartridge be used with different insert grades? Yes, the carrier accepts standard CCMT 1204 inserts of various grades; insert choice should reflect the workpiece material and cutting parameters. How does this component affect tool change procedures? KR120TM’s repeatable seating reduces alignment checks during insert replacement, streamlining changeover and supporting faster resumption of production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cartridge for Boring Tool 23-28 CCMT 0602, Precision Fit - Teknik Makina
Take advantage of a precision cartridge designed specifically for the CCMT 0602 insert range and ensure consistent seating and repeatable machining results; order directly via Metav Werkzeuge or contact our consultants for fit confirmation and supply. Cartridge KR100TM – Cartridge for Boring Tool 23–28 CCMT 0602 (Teknik Cutting Tools) A Cartridge KR100TM engineered to fit boring tool systems accepting CCMT 0602 inserts, intended for standardised mounting within the 23–28 application range. Compatible with boring tool 23–28 CCMT 0602 Teknik Makina original component SKU KR100TM for fast identification Precise insert seating to maintain machining accuracy The cartridge is designed to secure CCMT 0602 indexable inserts with consistent positioning, which supports repeatable cutting geometry and helps keep tool offsets stable. Correct seating reduces micro-movement at the insert interface and therefore contributes to precision in turning and boring processes. For users managing mixed tool fleets, standardised seating means fewer adjustments and more predictable part tolerances, translating directly into lower scrap rates and steadier cycle times. Streamlined setup and clearer stock management By specifying the SKU KR100TM and the compatible insert designation, workshop managers gain clarity when replenishing spare parts and planning maintenance. The clear association with the 23–28 application range and the CCMT 0602 insert family simplifies ordering and reduces the risk of incorrect components entering the toolroom. Fewer mismatches at assembly lead to quicker changeovers and less downtime, which improves overall equipment effectiveness in production environments where every minute of spindle time counts. Reliable supply backed by established industry partners Manufactured under the Teknik Cutting Tools name, this cartridge aligns with recognised tooling standards and is distributed through Metav Werkzeuge’s European supply chain. Metav’s role as a quality filter for the market means access to a wide range of precision items alongside documented sourcing and dependable logistics. The combination of a reputable tooling manufacturer and a dedicated distributor supports both immediate replacement needs and longer-term procurement strategies for workshops and industrial customers. For enquiries about compatibility, delivery or to confirm suitability for a specific boring head, contact Metav Werkzeuge — specialists in precision supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: KR100TM Description: Cartridge for Boring Tool 23–28 CCMT 0602 Manufacturer: Teknik Makina Facts Tool range: 23–28 Insert designation: CCMT 0602 SKU: KR100TM Special features Compatibility with CCMT 0602 indexable inserts Intended for boring tool 23–28 Supplied as a single replacement cartridge FAQ Is this cartridge compatible with all CCMT 0602 inserts? The cartridge is intended for the CCMT 0602 insert form; compatibility also depends on the specific boring head and clamping geometry used in the 23–28 range. How is the KR100TM identified when ordering spares? Use SKU KR100TM and the designation for the boring tool (23–28 CCMT 0602) to ensure the correct cartridge is supplied. Can the cartridge affect tool runout and surface finish? Correct seating of the insert in the cartridge helps maintain consistent tool geometry, which in turn supports stable runout values and repeatable surface finish in machining operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cartridge For Boring Tool 240-350 CCMT 1204, - Teknik Makina
Taking advantage of a precision cartridge that ensures a secure fit for CCMT 1204 inserts brings measurable improvements in machining stability and tool life; combine this with the straightforward replacement concept from Teknik Makina to reduce downtime and safeguard production continuity — order or request technical advice via Metav Werkzeuge for fast delivery and expert support. Cartridge for Boring Tool 240-350 CCMT 1204 by Teknik Makina — precision seating and fast replacement Cartridge for Boring Tool 240-350 CCMT 1204 is a dedicated insert carrier designed to provide stable seating and repeatable positioning for CCMT 1204 indexable inserts in medium to large boring applications Precision fit for CCMT 1204 inserts Robust construction for stable boring Quick, secure cartridge replacement Compatible with 240–350 boring range Consistent alignment that improves machining results The cartridge delivers a precision alignment between the indexable insert and the tool body, which reduces vibration and improves surface finish in internal turning and boring operations. By holding the CCMT 1204 insert in a stable seat, the component contributes directly to process reliability and predictable tool wear. For shops seeking reproducible results across batches, this part supports consistent tolerances without complex adjustments, making it a practical choice for production environments and jobbing workshops alike. Fast replacement that reduces downtime Designed for quick interchange, the cartridge enables rapid insert and carrier changes, shortening maintenance intervals and keeping machines productive. The secure mounting concept simplifies refitting and reduces the risk of incorrect seating that can lead to premature insert failure. As a result, cycle times and set-up labour are minimised, which translates into improved throughput and lower operational disruption when tool changes are required. Clear compatibility and straightforward integration Specified for use with the boring tool range indicated, the cartridge is intended to integrate directly into existing tool assemblies that accept CCMT 1204 inserts, providing a straightforward upgrade path. The compatibility reduces the need for additional adapters or customised fixtures, allowing the component to be adopted quickly in established tool flows. Where material or application guidance is required, the cartridge’s role as an insert carrier can be explained in simple terms to production planners and purchasing teams, supporting informed procurement choices. Contact Metav Werkzeuge for detailed compatibility checks or to arrange delivery of the Teknik Makina cartridge through Metav Werkzeuge GmbH — advice and swift supply from Emmerich by experienced precision partners Technical data Article number: KR124TM Name: Cartridge for Boring Tool 240-350 CCMT 1204 SKU: KR124TM Facts Compatible range: 240–350 Insert type compatibility: CCMT 1204 Special features For Boring Tool 240-350 CCMT 1204 Manufacturer: Teknik Makina UID: KR124TM FAQ What insert type does this cartridge accept? The cartridge accepts CCMT 1204 indexable inserts and is designed to provide a secure seat for that insert geometry. Is the cartridge suitable for different boring diameters? Yes; the cartridge is specified for the 240–350 range and integrates with the corresponding boring tool assemblies. How does this cartridge affect surface finish and tool life? By improving seating accuracy and reducing vibration, the cartridge contributes to a more consistent surface finish and can extend usable insert life through more stable cutting conditions. Who supplies this cartridge and where can it be ordered? The cartridge is supplied by Teknik Makina and can be ordered or specified via Metav Werkzeuge GmbH for delivery and technical support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Cartridge for Boring Tool 90-130 CCMT 1204, Replacement - Teknik Makina
Take advantage of a precision-fit cartridge that secures CCMT 1204 inserts in 90–130 mm boring assemblies; the robust design reduces vibration and simplifies replacement, ensuring consistent results on the shop floor. Order or request advice via Metav Werkzeuge for supply and application guidance. Cartridge for Boring Tool 90-130 CCMT 1204 by Teknik Makina — Precision fit, CCMT 1204 compatible A Cartridge for Boring Tool 90-130 CCMT 1204 engineered to hold CCMT 1204 inserts securely in 90–130 mm boring bars, optimising stability and repeatability in precision turning operations. Precision fit for 90–130 mm boring bars Secure clamping for CCMT 1204 inserts Durable construction for reliable repeats Quick replacement design for minimal downtime Stable clamping for improved machining accuracy The Cartridge for Boring Tool 90-130 CCMT 1204 provides a precision interface between the insert and the boring bar, reducing micro-movement that causes chatter and inconsistent finishes. By ensuring secure clamping of CCMT 1204 inserts, the module improves surface quality and dimension control, which in turn lowers scrap rates and rework. This is particularly valuable for medium to large bore turning where stability determines final tolerances. Robust construction that supports repeatability Built for repetitive workshop use, the cartridge focuses on robust construction and straightforward engagement. The clamping geometry is designed for repeatable seating of indexable inserts, delivering consistent cutting conditions across tool changes. This repeatability reduces setup time and contributes to predictable tool life, enabling process planners to maintain tighter production windows with fewer unexpected interruptions. Simple replacement and process integration The replacement-friendly design shortens downtime during insert changes and maintenance cycles. With compatibility for 90–130 mm tool ranges and standard CCMT insert formats, the cartridge assists in streamlining tooling logistics and inventory. Specified under KR117TM and supplied by Teknik Makina, the component integrates into existing boring systems without the need for major adapters, supporting efficient workflow on the shop floor. For precision machining with Teknik Makina components, contact Metav Werkzeuge for supply and detailed application guidance from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KR117TM Manufacturer: Teknik Cutting Tools Suitable for: Boring Tool 90–130 CCMT 1204 Core data Compatibility: CCMT 1204 inserts Boring diameter range: 90–130 mm SKU: KR117TM Special features Precision cartridge for insert seating Designed for repeatable clamping Quick replacement design Brand: Teknik Makina FAQ Is this cartridge compatible with CCMT 1204 inserts? Yes. The cartridge is designed specifically for CCMT 1204 insert geometry and secures these inserts for stable boring operations. Which boring tool range does the cartridge suit? The unit fits boring assemblies in the 90–130 mm diameter range and is intended to work with corresponding boring bars that accept this cartridge format. How does the cartridge affect surface finish and tool life? By providing a precision fit and secure clamping, the cartridge reduces vibration and micro-movements, which improves surface finish and can extend insert life under the same cutting conditions. What information identifies this part for ordering? Order using SKU KR117TM and reference the cartridge for boring tool 90–130 CCMT 1204 by Teknik Makina to ensure correct supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Extension for Boring Tool, Precision, 50mm Offset - Teknik Makina
Take advantage of a purpose-built extension that increases the working reach of a boring tool set while keeping tool inventory simple and traceable; the THB10TM combines straightforward compatibility with a proven brand connection to Teknik Makina — order directly via Metav Werkzeuge or consult our specialists for integration advice Extension for Boring Tool THB10TM by Teknik Makina — reach extension for boring operations The Extension for Boring Tool is designed to extend the effective length of a boring tool set for deeper internal machining and improved accessibility in confined bores Extension for boring tool sets Compatible with Teknik Makina tools Article number THB10TM for ordering Extend reach for deeper bores with assured alignment The THB10TM extension converts an existing boring tool set into a solution for deeper internal machining, allowing access where a standard boring bar would be too short. By increasing the effective working length, the accessory reduces the need for multiple tool changes and repositioning, which translates into fewer interruptions to the machining cycle. The accessory’s role is purely to extend reach while maintaining the original tool’s cutting geometry and alignment; this keeps the resulting bores within the expected tolerance band and helps preserve the original cutting conditions. For operations where depth and access are the limiting factors, this accessory provides a pragmatic way to adapt existing tooling without a complete retooling strategy. Faster throughput through fewer set-ups and predictable performance Integrating an appropriately rated extension into a boring workflow supports more efficient production planning: longer reaches mean fewer staged operations and reduced set‑up time per workpiece. The accessory complements the boring bar’s geometry and enables longer single‑pass cuts where machine rigidity and process parameters permit. That rational gain — fewer changeovers and less operator handling — should be weighed against machine spindle overhang and recommended cutting data. When used as part of a considered process, the extension contributes to improved productivity and steadier cycle times, which are decisive in high‑mix or small‑batch environments where every minute saved on set‑up compounds into measurable throughput gains. Practical compatibility advice and specification checks before ordering The extension is intended for use with boring tool sets and is listed as article THB10TM from Teknik Makina; compatibility with specific holders and machine spindles must be confirmed prior to installation. Check machine overhang limits, spindle taper and clamping interfaces to ensure safe operation under the intended cutting conditions. For components and fixtures where balance and vibration are critical, a short trial cut and a stepwise increase in cutting parameters are recommended to validate the assembly. If additional documentation is required, the product reference includes linked files for technical review. For those planning integration into existing fleets, Metav’s advisory resources can assist in matching the accessory to the correct toolset and in defining safe operating envelopes. For supply from Emmerich and tailored technical guidance on the Teknik Makina extension THB10TM, contact Metav Werkzeuge by email or phone to discuss compatibility and lead times Technical data Article number: THB10TM Name: Extension for Boring Tool Manufacturer: Teknik Makina eClass: 21041590 Files: 62de7e64a9cff922f4703d2f, 62de7ef033927e49dbf32799 Core data eClass: 21041590 UID: THB10TM Application / Features Application: for Boring Tool Brand: Teknik Makina FAQ Is this extension compatible with standard boring bars? The extension THB10TM is intended for use with boring tool sets; compatibility depends on the clamping interface and holder type used in the existing boring bar assembly. Can the extension be used for deep‑hole boring on small lathes? Deep‑reach use is possible where machine rigidity and spindle overhang permit; verify machine limits and conduct a controlled trial with the THB10TM before full production use. Will the extension affect bore accuracy? When correctly mounted and within the machine’s stiffness limits, the extension preserves the original tool’s cutting geometry and can maintain expected bore tolerances. What should be checked before installing the extension? Confirm spindle taper, clamping interface, maximum permissible overhang and balance; these checks ensure safe operation with the Teknik Makina THB10TM. Are there technical documents available for planning and installation? Product files are provided with the article THB10TM for technical review and should be consulted when planning integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15mm Boring Tool For CCMT 09T3 Indexable Inserts 45mm Cutting Diameter, L174mm - Teknik Makina
Take advantage of a compact combination of rigidity and extended reach for consistent internal turning operations; the 15 mm shank and overall length 174 mm ensure stable cutting conditions while accommodating CCMT 09T3 indexable inserts. Order directly via Metav Werkzeuge or ask our consultants for application advice. Boring Bar TKB180TM – 15 mm, for CCMT 09T3 Indexable Inserts (Teknik Makina) The Boring Bar TKB180TM is a precision long-reach boring tool designed for internal turning with CCMT 09T3 indexable inserts, suited to mid-range diameters and repeatable workshop processes 15 mm shank diameter for deep boring Compatible with CCMT 09T3 inserts Overall length 174 mm for extended reach Max cutting diameter 45 mm Stable reach and consistent cutting performance The long-reach design delivers a balance between accessibility and rigidity, allowing reliable internal machining where space is limited. A 15 mm shank provides a predictable stiffness-to-length ratio that reduces chatter during bore finishing, while the overall length 174 mm facilitates access to deeper bores without excessive overhang. For operators, this means fewer tool changes and improved cycle-time stability thanks to the combination of a compact profile and robust build. Insert flexibility that simplifies tool management Compatibility with CCMT 09T3 indexable inserts offers both cost efficiency and process flexibility. These inserts are widely available and allow quick re-grading between roughing and finishing grades without changing the tool body. The tool supports a max cutting diameter 45 mm and a cutting height 60 mm, parameters that guide the choice of insert projection and insert geometry for different internal diameters. Explained simply, the indexable system means replacement of only the insert rather than the whole tool, lowering inventory costs and streamlining workshop logistics. Productivity gains and workshop integration Designed for repeatable internal turning tasks, this boring bar helps reduce setup time and increase throughput when paired with standard insert handling procedures. The modest weight and compact footprint support easy handling during mounting, while the tool geometry supports effective chip evacuation when combined with appropriate insert selection and cutting parameters. Backed by Teknik Makina manufacturing, the unit aligns with common industrial standards for compatibility and repeatability, making it suitable for production and maintenance environments where continuity and dependable results are essential. For technical guidance on the Teknik Makina boring bar or to verify compatibility with existing toolholders and CCMT 09T3 inserts, contact Metav Werkzeuge in Emmerich by email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKB180TM Type: Boring tool Manufacturer: Teknik Makina ECLASS: 21181208 Label: 15mm Ausbohrwerkzeug CCMT 09T3 L174mm Facts Diameter: 15 mm Overall length: 174 mm Max cutting diameter: 45 mm Cutting height: 60 mm Weight: 1.832 kg Special features For CCMT 09T3 indexable inserts Product type: Ausbohrwerkzeug (boring tool) Category: Zerspanen FAQ What insert type does the tool accept? The tool accepts CCMT 09T3 indexable inserts; this common insert size offers broad grade and geometry options for roughing and finishing operations. What is the usable bore diameter range for this tool? The boring tool supports an effective range up to a max cutting diameter of 45 mm, with the 15 mm shank offering stability for internal turning at typical workshop speeds. Is the tool suitable for deep internal turning tasks? With an overall length of 174 mm, the bar is intended for extended reach operations while maintaining a balance of stiffness and accessibility for repeatable internal machining. How does insert change affect downtime? Using indexable inserts reduces downtime since only the insert requires replacement; the tool body continues in service, lowering tool costs and simplifying inventory. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16-20mm Boring Tool For WCMX And CCMT Indexable Inserts, M8 Thread, 66mm Overall Length - Teknik Makina
Take advantage of a compact, indexable-insert boring tool that combines compatibility with WCMX and CCMT inserts, a secure M8 mount and a short overall length for easy set-up and repeatable internal machining. Order directly via Metav Werkzeuge or consult the Metav specialists for application support and fast delivery. Boring tool TKB170TM — Indexable-insert bar for WCMX & CCMT, ø 16–20 mm (Teknik Makina) The boring tool TKB170TM is a compact indexable-insert holder designed for internal turning with WCMX 0302 and CCMT inserts, optimised for bore diameters in the 16–20 mm range. Compatible with WCMX 0302 and CCMT inserts Diameter range 16–20 mm M8 threaded mount for secure clamping Compact overall length 66 mm, lightweight 0.078 kg Precision where space is limited With a focus on efficient internal machining, this bar’s diameter range (16–20 mm) and compact overall length (66 mm) enable precise work in restricted envelopes. The short construction reduces overhang during operations, which helps maintain concentricity and limits deflection when using indexable tips. For workshops aiming to keep cycle times low, the combination of a slim cutting profile and robust insert compatibility delivers a pragmatic balance between rigidity and accessibility in tight bores. Secure mounting and straightforward handling The M8 threaded connection provides a straightforward means of securing the tool into a holder or turret; the M8 interface supports repeatable clamping and quick replacement. The low mass of 0.078 kg reduces effort during changeover and minimises dynamic imbalance at moderate spindle speeds, while the simple mechanical mounting helps shorten set-up times. Technicians benefit from predictable positioning and reduced rework, which translates into stable part quality across batches. Broad insert compatibility to cut stock and complexity Accepting both WCMX 0302 and CCMT indexable inserts, the bar supports a range of chipformers and grades for facing, turning and light boring operations. This versatility reduces the need for multiple specialised holders and simplifies inventory: one holder can be paired with grades chosen for ferrous or non-ferrous workpieces. The result is fewer tool changes, lower stockholding and faster response to mixed production demands without sacrificing the consistency expected in precision machining. Practical choice for toolrooms and small-bore production Designed for use in toolrooms, maintenance workshops and smaller production cells, the assembly is aimed at operators who require dependable performance in internal machining tasks. Pairing the holder with the appropriate insert grade allows for finishing or semi-finishing passes depending on material and process parameters. If guidance is needed on selecting the correct insert geometry or grade for a specific component, Metav’s technical advisors can provide tailored recommendations and supply chain support from Emmerich. For specification help, spare-part queries or to place an order for the Teknik Makina TKB170TM, contact Metav Werkzeuge for personalised advice and prompt dispatch from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TKB170TM SKU: TKB170TM Manufacturer: Teknik Makina ECLASS: 21181208 Core dimensions Diameter range: 16–20 mm Thread: M8 Overall length: 66 mm Weight: 0.078 kg Compatibility & features Compatible with WCMX 0302 indexable inserts Suitable for CCMT indexable inserts Intended for internal boring and finishing tasks Files: 62de7eefbd24461b3d5f7a86, 62de7e61148ec6b71020ff92 FAQ Is the holder compatible with CCMT inserts? The Teknik Makina TKB170TM supports both WCMX 0302 and CCMT indexable inserts, allowing choice of grade and chipbreaker for the specific application. What bore sizes can be machined with this tool? This bar is specified for a diameter range of 16–20 mm, making it suitable for small-bore internal machining. What is the mounting thread and overall length? The tool features an M8 threaded mount and an overall length of 66 mm. How heavy is the bar and what are the handling benefits? The assembly weighs 0.078 kg, which simplifies handling and reduces inertia for quicker changeovers. Can this holder be used for finishing operations? When paired with the correct insert grade and geometry, the TKB170TM can be used for light finishing passes in small bores; Metav can advise on the optimal insert choice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16-20mm Cartridge for Boring Tool WCMX 0302 - Teknik Makina
Reliable spare for precision boring: compatibility with the WCMX 0302 insert range and a straightforward replacement routine ensure shorter changeovers and steadier production. Order directly via Metav Werkzeuge or consult specialist advice where necessary. Cartridge for Boring Tool 16–20 WCMX 0302 — replacement unit by Teknik Makina The cartridge for Boring Tool 16–20 WCMX 0302 serves as a replacement insert carrier for precision boring assemblies, designed to accept WCMX 0302 inserts in the 16–20 range and to restore original tool geometry quickly. Compatible with 16–20 WCMX 0302 inserts Quick replacement for minimal downtime Robust build for workshop use Precision fit for boring assemblies Engineered compatibility for standard inserts The spare unit delivers reliable compatibility with the widely used WCMX 0302 insert format, ensuring secure seating and repeatable positioning in the boring head. By matching the established insert standard, the component maintains the original cutting geometry and axial alignment, which supports consistent bore quality. For operations that run mixed insert stocks, the clear conformity to the insert range simplifies inventory and reduces the risk of mismatched components, supporting a predictable machining outcome and fewer out-of-spec parts. Designed for efficient maintenance and reduced downtime A focus on replacement speed and precise fit translates directly into lower downtime during tool changes. The cartridge is engineered for straightforward removal and reinstatement in the boring assembly, enabling quicker routine servicing and faster swap‑outs between jobs. The resulting reduction in non-productive time improves overall equipment effectiveness and allows production schedules to remain tight without compromising the accuracy expected from a precision boring arrangement. Workshop-grade reliability and fit for purpose Constructed for regular workshop use, the unit offers robust construction and a precision mating surface that sustains repeatable clamping and minimal runout when installed. As a direct spare component, it supports stable machining forces and helps to preserve the life of both inserts and the holder when correctly mounted. For customers seeking dependable replacement parts from an established supply chain, the component integrates cleanly into a maintenance regime that values traceability and consistent performance. For technical advice on the Teknik Makina cartridge and prompt supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for order and availability information Technical data Article number: KR096TM Manufacturer: Teknik Makina Description: Cartridge for Boring Tool 16–20 WCMX 0302 Core specifications Compatible insert range: 16–20 Intended for: Boring Tool 16–20 WCMX 0302 Design & compatibility Replacement cartridge Compatible with WCMX 0302 insert standard Intended use: precision boring assemblies FAQ Which insert sizes are supported by this cartridge? The cartridge for Boring Tool 16–20 WCMX 0302 (KR096TM) is specified for the 16–20 range of the WCMX 0302 insert format. Is this a direct replacement for a WCMX 0302 carrier? Yes, the KR096TM item is intended as a replacement cartridge compatible with boring heads designed for WCMX 0302 inserts. How does the spare unit affect machining consistency? By restoring the original insert seating and alignment, the cartridge (KR096TM) helps maintain consistent bore geometry and repeatable surface finish across tool changes. What material is the cartridge made from? Material details are not specified in the available product data for the Cartridge for Boring Tool 16–20 WCMX 0302 (KR096TM); consult the technical datasheet for full material and heat‑treatment information. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com