Vollbohrer für effizientes Tiefbohren in Massivwerkstoff
Vollbohrer ermöglichen das direkte Einbringen von Bohrungen in Massivwerkstoff und sparen durch den Einsatz auf Drehmaschinen und Bearbeitungszentren wertvolle Prozesszeit, indem sie große Materialvolumina in einem Arbeitsgang abtragen; dabei bietet die Variante mit Innenkühlung die notwendige Kühlmittelzufuhr, um hohe Reibungswärme abzuführen und Späne sicher aus dem Bohrloch zu spülen, während Ausführungen ohne Innenkühlung nur für sehr kurze Bohrtiefen und leicht zerspanbare Materialien geeignet sind; als Synonyme gelten Massivbohrer und Vollkernbohrer, die in der Zerspanung vor allem durch ihre Standzeit und Prozesssicherheit überzeugen.
10.5mm Solid Drill 31mm Cutting Length 45mm Shank Length, 90mm Overall - Teknik Makina
Take advantage of a compact, insert-compatible drilling solution that combines productive changeover, consistent hole quality and straightforward workshop stocking. With a 10.5 mm cutting diameter and compatibility with Korloy XCMT 050204 inserts, the tool supports efficient cycle times and repeatable results — order the indexable insert drill directly via Metav Werkzeuge or ask our consultants if needed. Indexable insert drill U14TM — Ø 10.5 mm, Korloy XCMT-compatible The indexable insert drill U14TM is a purpose-built drill body for CNC and manual drilling operations, engineered to accept Korloy XCMT 050204 inserts for reliable, repeatable hole production in general engineering environments Diameter 10.5 mm for precise holemaking Compatible with Korloy XCMT 050204 inserts 16 mm shank for secure clamping 90 mm overall length for deep reach Reduce cycle times with standard insert compatibility The U14TM is designed to speed up machining through rapid insert replacement and predictable chip control. With a 10.5 mm nominal diameter and acceptance of the widely used XCMT 050204 insert form, changeovers become a routine task rather than a production interruption. The use of recognised insert formats shortens setup time and simplifies inventory management, delivering a measurable improvement in throughput for small-batch and repeat production alike. Stable clamping and consistent bore quality A robust 16 mm shank and a 45 mm effective shank length combine to provide secure clamping and low runout, which helps maintain concentricity and dimensional accuracy. The 31 mm cutting length balances material engagement with chip evacuation to reduce vibration and improve surface finish. These dimensional choices make the tool a dependable option when consistent hole tolerances and reproducible finishes are required across multiple components. Practical workshop advantages and stock efficiency The compact 90 mm overall length and light construction support flexible fixturing and easier tool handling at the bench or on the machine. Compatibility with Korloy inserts reduces the number of different spare parts carried in stock while preserving cutting performance through reliable insert geometry. For workshops seeking pragmatic solutions, the drill body delivers straightforward maintenance, rapid insert swaps and predictable life cycles — advantages that translate into less downtime and lower indirect costs. For precision drilling backed by Teknik Cutting Tools' engineering and stock handled by Metav Werkzeuge, request availability or tailored advice from Metav Werkzeuge in Emmerich to ensure the U14TM matches specific machine and application requirements Technical data SKU: U14TM Manufacturer: Teknik Makina Designation: Indexable insert drill body Numbers / Core technical data Diameter: 10.5 mm Cutting length: 31 mm Shank diameter: 16 mm Shank length: 45 mm Overall length: 90 mm Weight: 0.111 kg Special features Compatible insert: XCMT 050204 Compatible insert manufacturer: Korloy Designed for indexable insert drilling FAQ What insert does the drill accept? The drill accepts XCMT 050204 indexable inserts; the U14TM is configured for this common insert size. What is the shank diameter and how is it clamped? The U14TM has a 16 mm shank, intended for secure clamping in appropriate toolholders and collets to minimise runout. What hole depth can be reached with this tool? With an overall length of 90 mm and a cutting length of 31 mm, the tool is suitable for moderate-depth drilling within the stated dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
10.5mm Solid Drill Holder 31mm Cutting Length, 45mm Shank Length - Teknik Makina
Take advantage of a compact, indexable solution for precise steel machining: the combination of a Ø10.5 mm cutting diameter, a 31 mm cutting length and a rigid 16 mm shank ensures stable performance and reduced tool-change time; order this tool directly via Metav Werkzeuge or request advice from the Metav consultants. Indexable-insert drill body U32TM (Ø10.5 mm, compatible with Taegutec inserts) by Teknik Makina A Indexable-insert drill body designed for reliable removal of material in steel applications, offering a compact overall length of 90 mm and straightforward integration into standard toolholders. Compatible with Taegutec XCGT 050204 Ø10.5 mm cutting diameter 31 mm cutting length for deep holes 16 mm shank with 45 mm clamping length Consistent hole quality for production environments The drill body delivers consistent hole quality by combining a defined cutting zone with a stable shank geometry. The specified Ø10.5 mm diameter and 31 mm cutting length are selected to give predictable chip evacuation and reduced run-out in high-volume operations. As an indexable-insert system, the cutting edges are replaced rather than the entire tool, which keeps downtime low and maintains repeatability across batches. Overall rigidity and a compact footprint reduce vibration, so that tolerance retention is supported across repetitive cycles. Simple integration and cost-effective wear management Compatibility with Taegutec XCGT 050204 inserts means the tool is supplied to fit an established insert family, simplifying procurement and stocking. The use of replaceable inserts turns cutting-edge wear into a short service step rather than a full tool change, delivering measurable cost-efficiency over the life of the tool. For workshops evaluating tooling strategies, this indexable approach reduces total tooling spend while preserving cutting performance and surface finish standards expected in industrial steelwork. Secure clamping and practical handling on the shop floor A 16 mm shank diameter with 45 mm clamping length provides secure fixation in standard toolholders, improving concentricity and enabling safer spindle speeds within the machine’s recommended limits. The assembly weight of 0.114 kg contributes to easy handling during set-up and minimises added spindle load. Designed with robust construction for steel machining, the tool body supports stable chip formation and consistent cutting conditions, which in turn aids downstream processes by reducing rework needs and supporting production throughput. For ordering or technical clarification, contact Metav Werkzeuge GmbH: info@metav-werkzeuge.com or +49 2822 7131930 and request the Teknik Makina indexable-insert drill body (U32TM) for efficient steel machining. Technical data Article number: U32TM Manufacturer: Teknik Makina Product: Indexable-insert drill body Data Diameter: 10.5 mm Overall length: 90 mm Cutting length: 31 mm Shank diameter: 16 mm Clamping length: 45 mm Weight: 0.114 kg Special features Compatible with Taegutec XCGT 050204 inserts Suitable for steel machining (shop description) Indexable-insert design for reduced tool replacement FAQ Which inserts fit this drill body? The drill body accepts Taegutec XCGT 050204 inserts; this compatibility is specified to ensure standardised insert stocking and simple replacement. What is the effective cutting length? The effective cutting length is 31 mm, giving sufficient engagement for many through and partial-depth hole operations. Which shank size is required for clamping? Clamping is designed around a 16 mm shank diameter with a 45 mm clamping length for secure fixation in compatible toolholders. Is this tool suitable for machining steel? Yes, the tool body is intended for steel machining, with geometry and construction aimed at stable cutting and reliable chip control. What is the article number for ordering and reference? Order or reference the tool by article number U32TM, Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
10mm Solid Drill 22.5mm Cutting Length 42mm Shank Length, Compatible with Korloy Inserts - Teknik Makina
Take advantage of a compact, purpose-built drill solution that combines a precise 10 mm diameter with a substantial 22.5 mm cutting length for efficient material removal; the tool’s 12 mm shank and 74.5 mm overall length ensure reliable clamping and repeatable operation. Order the Indexable drill directly via Metav Werkzeuge or consult our specialists for application advice. Indexable drill U030TM — 10 mm diameter, 22.5 mm cutting length The Indexable drill U030TM is designed for precision machining with replaceable inserts and is suited for integrated production workflows where uptime and predictable results are essential 10 mm cutting diameter 22.5 mm cutting length Compatible with Korloy QC-- 050204 inserts 12 mm shank diameter Faster cycle times through focused cutting capacity The tool’s combination of a 10 mm diameter and a 22.5 mm cutting length supports shorter cycle times in batch and single‑piece production. By using an insert system specified for Korloy QC-- 050204, the design separates the cutting edge from the body so that worn inserts can be replaced quickly; this reduces downtime compared with regrinding and contributes to sustained productivity. The result is a pragmatic performance boost for drilling and related operations where controlled chip evacuation and consistent hole quality are required. Stable clamping for predictable hole geometry A 12 mm shank with a dedicated shank length of 42 mm delivers a secure grip in standard toolholders, improving concentricity and helping to maintain hole tolerances across repeated cycles. With an overall length of 74.5 mm and a body weight of 0.062 kg, the drill body balances stiffness and manoeuvrability — ideal when stable toolholding and modest overhang are needed. These dimensions make the component straightforward to integrate into existing setups while preserving repeatability and workpiece integrity. Simple integration with common insert systems Compatibility with Korloy QC-- 050204 inserts ensures access to a broad range of carbide grades and geometries, letting production engineers tailor cutting data to the workpiece material and finish requirements. The insert-based approach reduces tooling costs over time by enabling targeted replacement and simplifies inventory management when the insert designation is standardised across several drill sizes. Suited to workshop and industrial environments This drill body is a practical choice for workshops aiming to streamline tooling: the insert system keeps maintenance simple, and the compact design supports flexible machining strategies. Where reliable throughput and controlled holes are priorities, the tool provides a straightforward, cost‑efficient solution that complements a wider tooling portfolio without requiring extensive new fixtures or adapters. Discuss application requirements with Metav Werkzeuge — request compatibility checks for the U030TM and arrange delivery from Metav Werkzeuge GmbH by contacting info@metav-werkzeuge.com or calling +49 2822 7131930 Technical data SKU: U030TM Description: Indexable drill Manufacturer: Teknik Makina Compatible inserts: Korloy QC-- 050204 Core specifications Diameter: 10 mm Cutting length: 22.5 mm Shank diameter: 12 mm Shank length: 42 mm Overall length: 74.5 mm Weight: 0.062 kg Features Insert designation: QC-- 050204 Compatible insert maker: Korloy Application: milling/drilling tasks referenced in product listing Files attached: 2 migration files available FAQ Which inserts fit this drill body? The drill body is compatible with Korloy inserts designated QC-- 050204, allowing the use of standard Korloy carbide grades for different materials. What are the key dimensions to check for holder compatibility? Check the 12 mm shank diameter, the 42 mm shank length and the 74.5 mm overall length to ensure secure clamping in existing toolholders. Is the tool suitable for high‑volume production? Yes — the insert system and compact geometry are intended to reduce downtime and enable rapid insert replacement, supporting continuous production. How does the cutting length affect application choice? A 22.5 mm cutting length provides sufficient engagement for many through‑hole and shallow blind‑hole operations while keeping overhang moderate, aiding stability. Who supplies the drill body and where can further information be obtained? The product is supplied by Teknik Makina; Metav Werkzeuge can provide application advice and logistics support for integration into workshop tooling Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
10mm Solid Drill for XC-- 050204 Indexable Inserts 22.5mm Cutting Length, 42mm Shank - Teknik Makina
Combining the 10 mm cutting diameter with a 22.5 mm cutting length and compatibility for XC-- 050204 indexable inserts, this solid drill delivers consistent hole quality and easy maintenance in compact tool setups; order the U045TM via Metav Werkzeuge or consult our specialists for application support. Solid drill U045TM — 10 mm diameter, 65 mm overall length (Teknik Makina) The Solid drill U045TM is an indexable-insert drill engineered for precision machining with XC-- 050204 inserts, suited to workshop and industrial setups requiring repeatable, serviceable performance 10 mm diameter for accurate machining 65 mm overall length for compact setups Compatible with XC-- 050204 indexable inserts Torx T6 fixation, M2x4.2 fasteners Precision where hole quality matters The drill’s 10 mm diameter and 22.5 mm cutting length are dimensioned to provide stable cutting engagement with indexable plates, ensuring repeatable hole geometry and reduced scrap rates. Using an insert system tailored to the plate designation XC-- 050204 simplifies tool management: inserts can be selected for wear resistance or coated grades to match the workpiece, while a defined cutting length keeps tolerances tighter. For production environments this translates into predictability and fewer in-process adjustments. Compact design for stable integration A 65 mm overall length combined with a 42 mm shank engagement results in reduced overhang and improved rigidity for shorter, stiffer set-ups. The low mass (approx. 0.062 kg) lessens centrifugal load at high spindle speeds and helps sustain axial stability, particularly on smaller toolholders or in crowded spindle configurations. These design choices support closer tool-to-workpiece proximity and enable machining where space constraints or multi-spindle arrangements demand compact tooling. Secure clamping and quick insert handling Insert retention is implemented via a Torx T6 screw and an M2x4.2 fastener, providing secure seating and consistent clamp force for low-vibration machining. Compatibility with inserts from ISCAR widens the selection of grades and geometries, allowing optimisation for materials and cutting conditions. The indexable-insert concept reduces downtime for regrinds and replacement, as only the plate is exchanged rather than the whole tool, keeping production runs efficient and maintenance straightforward. Metav’s experience and inventory breadth further support rapid replacement and technical consultancy. Choose Teknik Makina’s U045TM for dependable indexable-insert drilling — contact Metav Werkzeuge in Emmerich for technical guidance and to place an order. Technical data SKU: U045TM Manufacturer: Teknik Makina ECLASS: 21180201 Designation: 10 mm solid drill for XC-- 050204 inserts L65mm Core dimensions Diameter: 10 mm Overall length: 65 mm Cutting length: 22.5 mm Shank engagement length: 42 mm Weight: 0.062 kg Special features For indexable inserts: XC-- 050204 Compatible inserts manufacturer: ISCAR Torx key: T6 Torx screw: M2x4.2 Product type: Solid drill FAQ Which insert type fits this drill? The drill accepts XC-- 050204 indexable inserts; compatible plates from ISCAR are recommended for optimal fit and performance with the U045TM solid drill. What are the key dimensions to check for my setup? Key values are 10 mm diameter, 65 mm overall length and 22.5 mm cutting length; the shank engagement is 42 mm and the tool weighs approximately 0.062 kg. How is the insert secured? Insert retention is by a Torx T6 screw using an M2x4.2 fastener, providing reliable clamping for the U045TM and consistent seating of the indexable plate. Can this drill be used in compact spindles or multi-spindle heads? Yes. The 65 mm overall length and 42 mm shank engagement are designed to suit compact installations while maintaining rigidity and stability. Is the U045TM suitable for high-speed applications? The solid, low-mass construction supports stable performance; selection of appropriate insert grade and cutting parameters will determine suitability for specific high-speed conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
10mm Solid Drill for XC-- 050204 Indexable Inserts 22.5mm Cutting Length, 42mm Shank - Teknik Makina
Take advantage of a compact, compatibility-focused design and precise cutting geometry to keep machining cycles predictable and tool changes fast; the combination of 10 mm bore accuracy and XC-- 050204 insert compatibility supports smooth process integration — order the component via Metav Werkzeuge or consult our specialists for application advice. Solid drill U061TM — 10 mm diameter, XC-- 050204 insert compatible (Teknik Makina) Solid drill U061TM designed for insert tooling applications, offering a compact overall length and an insert system suited to production and workshop environments *10 mm diameter for precise bore control *65 mm overall length for compact setups *Indexable XC-- 050204 insert compatibility *Lightweight design at 0.062 kg Optimised drilling performance for production use The U061TM is engineered to deliver repeatable hole quality in setups where consistency matters. With a 10 mm nominal diameter and a 22.5 mm cutting length, the tool allows defined engagement into the workpiece while keeping overhang low, which reduces deflection and improves concentricity. The use of XC-- 050204 indexable inserts means the cutting geometry is maintained by replaceable carbide or cermet inserts, so dimensional stability is preserved across multiple regrinds. In practical terms, cycle times become more predictable and inspection effort is reduced thanks to the stable tool geometry. Straightforward insert replacement and serviceability Maintenance is simplified by standard fastenings and a compact replacement routine: retention is secured with an M2x4.2 screw tightened to a T6 Torx key, which keeps changeovers fast and repeatable. Compatible inserts from Ceratizit are accepted, allowing stock consolidation and rapid replenishment of cutting edges. Since only the insert is replaced rather than the entire body, toolholder inventories are smaller and cost per hole is reduced. The design supports routine shopfloor servicing and predictable spare-part planning for production environments. Easy integration into compact machines and fixtures The tool’s dimensions — a 65 mm overall length with a 42 mm shank length — make it well suited to machines with limited tool-change space or fixtures where clearance is constrained. The low mass of 0.062 kg minimises inertial effects during rapid moves, improving axis control and reducing wear on spindle bearings in high-repetition tasks. Identified as U061TM, the component is intended for straightforward inventory integration and traceability, enabling faster procurement and replacement planning within existing tool systems. Contact Metav Werkzeuge today to discuss how the Teknik Makina U061TM solid drill with 10 mm diameter and XC-- 050204 indexable insert compatibility can be integrated into current machining processes and spare-part strategies. Technical data Article number: U061TM Manufacturer: Teknik Makina Product type: Solid drill Core dimensions Diameter: 10 mm Overall length: 65 mm Cutting length: 22.5 mm Shank length: 42 mm Weight: 0.062 kg Torx screw: M2x4.2 Torx key: T6 Special features Compatible with XC-- 050204 indexable inserts Suitable for Ceratizit inserts Compact design for limited-clearance applications Lightweight for reduced spindle load FAQ Which insert type is required for this tool? The tool accepts XC-- 050204 indexable inserts; compatible inserts from Ceratizit are specified for the U061TM solid drill. What is the usable cutting length? The usable cutting length is 22.5 mm, which is set to balance reach with rigidity for precise bore control in production setups. Which fastening hardware is used to secure the insert? Insert retention uses an M2x4.2 screw fastened with a T6 Torx key to ensure consistent clamp force on the U061TM. Is the shank suitable for standard collets and holders? With a 42 mm shank length and compact overall dimensions, the U061TM is intended for holders and fixtures requiring short overhang; check holder capacity for the specific clamping length. How is the tool identified for reordering and stock management? The tool is listed under SKU U061TM, which supports straightforward reordering and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
10mm Through Coolant Solid Carbide Drill 30mm Cutting Length 45mm Shank Length, 90mm Overall - Teknik Makina
Secure, economical drilling for small-diameter production: the combination of a 10 mm cutting diameter, a 16 mm shank and a 30 mm cutting length gives repeatable hole quality with minimal tool changes. Order the tool via Metav Werkzeuge or consult the Metav team for application advice and reliable supply. Indexable Insert Drill Body U12TM — 10 mm, 16 mm shank (Teknik Makina) The Indexable Insert Drill Body U12TM is a compact drilling solution for precision small-hole work, designed to accept standard indexable inserts for efficient metalworking applications. 10 mm nominal diameter for tight holes Compatible with XCMT 050204 inserts 16 mm shank for secure clamping 30 mm cutting length for controlled depth Consistent hole quality for serial production The U12TM is engineered for stable machining in repetitive drilling operations. With a 10 mm nominal diameter and 30 mm cutting length, the tool provides a predictable cutting engagement that supports consistent cycle times and reduces scrap. The indexable-insert concept separates the economics of the cutting edge from the body: when an insert reaches its service life, only the insert is changed, which lowers long-term tooling costs and keeps machining downtime to a minimum. This focus on predictable output and rapid servicing suits workshop and small-series production alike. Rigidity and clamping reliability for accurate positioning A 16 mm shank and an overall length of 90 mm combine to give a balanced tool geometry that minimises chatter and runout in most standard drilling set-ups. The relatively low mass of 0.109 kg means reduced spindle load while maintaining the stiffness required for true-to-diameter holes. The 45 mm shank engagement length supports secure clamping in standard collets and holders; the result is improved repeatability and fewer rework cycles through better positional accuracy. Economical insert system and simplified maintenance This drill body is specified for XCMT 050204 inserts and is compatible with inserts from Korloy, enabling access to widely available, industry-standard cutting grades. Indexable inserts deliver the practical benefit of instant edge renewal — a worn corner is replaced in seconds without regrinding — which reduces overall tooling expenditure and keeps machines running. For buyers seeking predictable running costs, the separation of body and insert is a rational, cost-conscious choice that supports continuous production. Easy integration into tooling inventories With the unambiguous SKU U12TM and standardised interface dimensions, this drill body fits into common tooling systems and procurement workflows. The compact overall length and standard shank diameter ease storage and handling, simplifying stock planning for maintenance and production teams. As a documented component with clear insert compatibility, it supports efficient spare-part management and rapid replacement cycles in the workshop environment. Contact Metav Werkzeuge for ordering and application support on the Teknik Cutting Tools U12TM indexable insert drill body — call +49 2822 7131930 or email info@metav-werkzeuge.com for local stock and expert advice Technical data Article number: U12TM Manufacturer: Teknik Makina Product name: Indexable Insert Drill Body Diameter: 10 mm Overall length: 90 mm Cutting length: 30 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.109 kg Compatible insert type: XCMT 050204 Compatible insert manufacturer: Korloy Tool type: indexable insert drill body FAQ Which insert type is required for this drill body? The U12TM drill body is designed for XCMT 050204 indexable inserts; Korloy grades are a listed match for reliable performance. How does the shank size affect machining stability? The 16 mm shank provides sufficient clamping engagement for typical toolholders, increasing rigidity and reducing runout compared with undersized shanks in similar-length tools. What are the key dimensions to check when replacing this tool in a holder? Check the 16 mm shank diameter, the 90 mm overall length and the 45 mm shank engagement length to ensure correct seating and clamping in the holder. Can inserts be replaced on the machine or is removal required? Indexable inserts for this drill body are replaced directly on the tool body; the process is quick and avoids the need for body removal from the machine in most maintenance routines. Is the U12TM suitable for stock management in a production environment? Yes, the clear SKU (U12TM), standardised insert type and compact footprint make this drill body straightforward to stock and rotate as part of a production tooling strategy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
11,5mm Indexable Drill for Taegutec XCGT 060204 inserts - Teknik Makina
Detailed Technical Data: Order Number: U36TM Item: Indexable Drill usable with XCGT 060204 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Quantitative Characteristics: Diameter: 11,5mm Weight: 0.112kg Total length: 92mm Diameter Connection: 16mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
11.5mm Solid Drill 35mm Cutting Length, 45mm Shank Length - Teknik Makina
Compact performance and straightforward servicing combine in this indexable solution: reliable repeatability thanks to the insert system and a secure 16 mm shank for stable clamping. Order the drill body directly via Metav Werkzeuge or consult their specialists for application-specific advice. Indexable Insert Drill Body U18TM – Ø 11.5 mm, 16 mm shank (Teknik Makina) An Indexable Insert Drill Body (Vollbohrer) designed for efficient holemaking in metalworking where fast insert replacement and consistent hole quality are required Indexable design for XCMT 060204 inserts Diameter 11.5 mm for standard hole sizes 35 mm effective cutting length 16 mm shank for secure clamping Overall length 92 mm, lightweight 0.113 kg Consistent hole quality through an insert system The indexable insert concept ensures stable machining results without full-tool replacement. With a nominal Ø 11.5 mm diameter and a cutting length of 35 mm, the tool body maintains repeatable cutting geometry across insert changes. The use of standard XCMT 060204 inserts (Korloy-compatible) means cutting edges can be swapped quickly, preserving bore tolerances and reducing scrap. This design is particularly effective where batch-to-batch consistency and predictable wear management are priorities, enabling controlled tool costs and reliable cycle times. Secure clamping and compact design for workshop use A robust 16 mm shank and a defined shank length of 45 mm provide secure seating in holders and adaptors, limiting runout and vibration during operation. The compact overall length of 92 mm and low mass (approx. 0.113 kg) reduce centrifugal loading at higher spindle speeds and simplify handling in manual set-up or machine changeovers. These characteristics support stable surface finish and dimensional control, making the component suitable for demanding production sequences that benefit from reduced set-up times. Faster servicing and lower tooling inventory Replacing indexable inserts is faster than regrinding or replacing complete solid-drill tools; the practical consequence is less downtime and a smaller tooling inventory. The compatibility with Korloy inserts helps shops standardise on widely available cutting grades and geometries, streamlining procurement and ensuring rapid availability of spare edges. Together, these factors translate into measurable process efficiency and a lower total cost of ownership for repetitive holemaking tasks. Integration into machining processes and handling notes The drill body is intended for use as an insert-based drilling solution in industrial and workshop environments where modular tooling is preferred. The tool’s geometry supports straightforward clamping and predictable tool life when paired with appropriate inserts and machining parameters. Where precise hole diameters are required, the modular approach allows fine-tuning of cutting edge selection without changing the tool body, aiding both prototype work and steady production runs. For application guidance or to secure the Teknik Makina indexable insert drill body U18TM, contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: U18TM Manufacturer: Teknik Makina Product: Indexable insert drill body (Vollbohrer) Facts Diameter: 11.5 mm Overall length: 92 mm Cutting length: 35 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.113 kg Special features Compatible inserts: XCMT 060204 Compatible insert manufacturer: Korloy SKU: U18TM FAQ Which insert type fits this drill body? The drill body accepts XCMT 060204 indexable inserts; the system is compatible with inserts from Korloy as specified for the U18TM. What are the key dimensions to check for toolholding? Relevant dimensions are the 16 mm shank diameter, 45 mm shank length and an overall length of 92 mm for correct selection of holders and adaptors for the U18TM. How does the insert system affect maintenance? Insert replacement on the U18TM reduces downtime compared with full-tool changes; worn edges can be swapped quickly, restoring cutting geometry without removing the tool body. Is the drill body supplied with inserts? The listing specifies compatibility with XCMT 060204 inserts; availability of inserts depends on the selected package and should be verified when ordering the U18TM. Can the tool be used across different machines? The design and 16 mm shank allow integration into a variety of clamping systems; verification of holder compatibility and runout tolerances is recommended before first use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
115mm 19mm Solid Drill 25mm Shank 38mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of precise, repeatable drilling with a compact, indexable design and reliable shank stability; the compatibility with Korloy WCM-0302 inserts reduces tooling costs and simplifies maintenance — order via Metav Werkzeuge or consult the team for specification matching. Teknik Makina Insert drill U107TM — Ø 19 mm, 115 mm overall length A robust Insert drill U107TM engineered for indexable insert drilling in general machining applications, offering secure clamping and economical insert replacement. Compatible with Korloy WCM-0302 inserts Precision Ø 19 mm cutting diameter 25 mm shank for stable clamping Cutting length 38 mm for through operations Built for stable, repeatable drilling in production The Insert drill U107TM from Teknik Makina combines a compact footprint with measurable stability: a 25 mm shank and low mass of 0.312 kg support reliable toolholding and reduced runout. With a Ø 19 mm cutting diameter and 115 mm overall length, the tool body is designed to keep concentricity high across repeated cycles. Compatibility with Korloy WCM-0302 inserts ensures consistent edge geometry and straightforward indexability, which together improve process repeatability and reduce scrap rates. Productivity gains through replaceable inserts and quick handling Replacing worn cutting edges instead of the complete tool body lowers lifecycle costs and machine downtime. The cutting length 38 mm is optimised for medium penetration while the 25 mm shank offers increased clamping security in standard holders. These characteristics translate into higher spindle uptime and predictable tool-change intervals. Where faster throughput and predictable tool budgets matter, this indexable approach delivers a clear economic advantage without complex retrofit work. Easy integration with Metav supply and expert advice Integration into existing tool holders and machining cells is straightforward thanks to the standard shank dimensions and the use of widely available Korloy inserts. Metav serves as a pragmatic supply partner from Emmerich, providing a wide range of compatible tooling and a transparent logistics chain. The combination of practical tool design and a dependable supplier network supports continuous production and reduces administrative overhead when replenishing inserts or tool bodies. Contact Metav Werkzeuge for tailored technical advice and secure supply of the Teknik Makina U107TM, compatible with Korloy WCM-0302 inserts — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for swift, professional assistance Technical data SKU: U107TM Manufacturer: Teknik Makina Diameter: 19 mm Overall length: 115 mm Weight: 0.312 kg Data Cutting length: 38 mm Shank diameter: 25 mm Shank length: 56 mm Compatible insert type: WCM-0302 Compatible insert manufacturer: Korloy Special features Indexable insert drill body Compatible with Korloy WCM-0302 inserts Designed for stable clamping and repeatable performance Manufacturer: Teknik Makina FAQ Which inserts fit this drill? The drill body accepts Korloy WCM-0302 inserts; Tekinik Makina’s U107TM is configured for those insert sizes and seat geometry. What are the principal dimensions to check for holder compatibility? Key dimensions: Ø 19 mm cutting diameter, cutting length 38 mm, overall length 115 mm, shank diameter 25 mm; the SKU is U107TM. Which shank holder is required? A holder or collet compatible with a 25 mm shank is required for secure clamping when using the U107TM tool body. How does insert replacement affect downtime? Indexable inserts such as the WCM-0302 reduce downtime because worn edges are replaced quickly without swapping the entire tool body, keeping machines productive. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
11mm Solid Carbide Drill 33mm Cutting Length 45mm Shank Length, 92mm Overall - Teknik Makina
Take advantage of a robust indexable solution that combines repeatable hole quality and straightforward maintenance: the drill’s Ø11 mm cutting diameter and 33 mm effective cutting length ensure consistent performance, while the 16 mm shank and 45 mm shank length provide rigid clamping and reduced run-out. Order the solid drill directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U34TM – Indexable insert drill, Ø11 mm, compatible with Taegutec inserts by Teknik Makina Vollbohrer U34TM is an indexable insert drill designed for stable, repeatable drilling with replaceable inserts, suitable for machining setups that require quick insert changes and consistent hole quality. Ø 11.00 mm cutting diameter 33 mm effective cutting length 16 mm solid shank with 45 mm shank length Compatible with XCGT 050204 inserts by Taegutec Higher repeatability through rigid shank and defined cutting length The U34TM delivers improved hole repeatability thanks to a 16 mm solid shank that reduces deflection under load and a precisely defined 33 mm cutting length that limits contact to the tool’s designed working zone. This configuration supports stable chip formation and consistent tool engagement, which is particularly beneficial in batch production or when tight positional tolerances are required. The reduced risk of run-out translates into fewer rejected parts and lower rework effort, giving a tangible productivity advantage on the shop floor. Cost effectiveness via replaceable indexable inserts By accepting the XCGT 050204 indexable insert, the drill separates cutting geometry from the tool body, enabling quick insert changes without removing the holder from the machine. This design reduces downtime and tooling expenditure over time: worn cutting edges are replaced, not entire drills. The compatibility with Taegutec inserts provides access to a wide range of proven grades and geometries, allowing selection of the insert best suited to the actual machining task. Cleaner inventory management and faster set-up cycles are direct operational benefits of this approach. Practical integration and workshop convenience With an overall length of 92 mm and a modest weight of 0.112 kg, this indexable drill is compact enough for common holder setups while providing the working reach expected from an industrial tool. The Ø11 mm diameter and standard 16 mm shank facilitate mounting in common clamping systems and reduce the need for special adapters. For users who require additional details on mounting or insert selection, Metav’s technical team is available to advise on the optimal insert grade and clamping method for the intended application. For tailored advice or to secure stock from Metav Werkzeuge’s Emmerich warehouse—trusted for rapid supply and technical support—contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss the Teknik Makina U34TM and suitable inserts Technical data Article number: U34TM Manufacturer: Teknik Makina Facts Diameter: 11 mm Overall length: 92 mm Cutting length: 33 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.112 kg Special features Compatible inserts: XCGT 050204 Compatible insert manufacturer: Taegutec Product type: Indexable insert drill SKU: U34TM FAQ Which insert type fits this drill? The drill accepts the XCGT 050204 indexable insert; Teknik Makina specified this format for the U34TM to ensure straightforward replacements. What shank size is required for clamping? A 16 mm solid shank is provided on the U34TM, allowing secure clamping in standard 16 mm holders or suitable collet systems. What is the effective cutting length? The effective cutting length is 33 mm, which defines the working zone for repeatable hole production. Is the drill supplied with inserts? The product listing specifies compatibility with XCGT 050204 inserts; check the product offer for whether inserts are included or sold separately. Can the U34TM be used in automated tool changers? With a compact overall length of 92 mm and a standard 16 mm shank, the U34TM is suitable for many tool-changing systems; confirm holder compatibility for the specific machine interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
11mm Solid Drill for XC-- 050204 Indexable Inserts 33mm Cutting Length, 45mm Shank - Teknik Makina
Benefit from precise holemaking with the combination of an 11 mm cutting diameter and a 33 mm cutting length, plus secure Torx fastening for fast insert changes; the compatibility with XC-- 050204 indexable inserts and a compact 92 mm overall length supports stable setups and efficient machining. Order the tool via Metav Werkzeuge or contact their consultants for application advice. 11 mm solid drill body U15TM — compatible with XC-- 050204 indexable inserts, L92 mm (Teknik Makina) 11 mm solid drill body U15TM for precision drilling with indexable inserts in milling and turning operations 11 mm cutting diameter Compatible with XC-- 050204 indexable inserts Overall length 92 mm Torx T6 fastening, M2x4.2 screw Precision drilling for consistent hole quality and predictable cycle times The 11 mm drill body is engineered as an indexable-insert solution that turns insert changes into a fast, reproducible routine. With a 33 mm cutting length and 92 mm overall length, the design provides a stable tool projection that reduces vibration and helps maintain concentricity in serial production. Using indexable inserts instead of solid carbide tips simplifies reconditioning: worn edges are replaced rather than the entire tool, saving time and lowering lifecycle costs while preserving process stability. Fast insert changes and secure clamping for reduced downtime Insert retention is handled with a Torx T6 screw (specification M2x4.2) to ensure consistent clamp torque and repeatable seating of each XC-- 050204 insert. The mechanical simplicity of this fastening system supports a quick replacement routine and reduces the chance of incorrectly torqued screws, which improves uptime. For workshops aiming to increase throughput, the combination of tried-and-tested fastening and straightforward geometry translates into measurable reductions in incidental stops for tooling maintenance. Practical workshop advantages: compatibility, handling and stock rationalisation Designed by Teknik Makina and supplied as SKU U15TM, this solid drill body fits holders and tool systems with a 16 mm interface and a 45 mm tool-holder engagement, enabling straightforward integration into existing setups. The modest weight of 0.112 kg makes handling and tool changes ergonomic, while compatibility with Taegutec-produced inserts widens sourcing options. For procurement, the clear specification reduces ambiguity at the point of order and helps consolidate tooling variants across jobs, simplifying inventory management and ensuring readiness for repeat production runs. For direct supply, delivery questions or technical suitability checks for the Teknik Makina U15TM solid drill body, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machine compatibility and stock availability. Technical data SKU: U15TM Item label: 11 mm solid drill body for XC-- 050204, L 92 mm Manufacturer: Teknik Makina Dimensions & weight Diameter: 11 mm Overall length: 92 mm Cutting length: 33 mm Shank diameter: 16 mm Holder engagement length: 45 mm Weight: 0.112 kg Compatibility & fastening Compatible with XC-- 050204 indexable inserts Suitable for Taegutec inserts Fastening: Torx T6 Screw: M2x4.2 FAQ Which inserts fit this drill body? The drill body accepts XC-- 050204 indexable inserts; Taegutec-manufactured inserts in that designation are compatible with the Teknik Makina U15TM and provide standardised seating and cutting geometry. What is the effective cutting depth of the tool? The effective cutting length is 33 mm, which defines the maximum depth of cut that can be achieved with the U15TM before the non-cutting shank engages. What machine interfaces are required for installation? The tool requires a holder or chuck accepting a 16 mm shank diameter with at least 45 mm engagement; installation into suitably rated milling or turning toolholders is recommended for safe operation. How are inserts secured and replaced? Inserts are secured with a Torx T6 screw (specification M2x4.2), allowing torque-controlled fastening to achieve repeatable clamping during insert changes. What is the SKU and mass of the tool for logistics planning? The product is listed as SKU U15TM and has a mass of 0.112 kg, useful for packing and storage calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12.5mm Solid Drill Holder For Indexable Inserts SPMG 0502, 38mm Cutting Length, 50mm Shank Length - Teknik Makina
Take advantage of a robust combination of compatibility, compact dimensions and straightforward maintenance for dependable CNC drilling cycles; the compatibility with SPMG 0502 indexable inserts and the compact Ø12.5 mm cutting diameter ensure repeatable results and cost-efficient insert replacement. Order the tool directly via Metav Werkzeuge or consult our team for technical guidance. Insert Drill U812TM – indexable insert drill, Ø12.5 mm, for SPMG 0502 (Teknik Makina) Insert Drill U812TM is a precision drill body designed for indexable SPMG 0502 inserts, intended for workshop and production environments where fast insert changes and reproducible hole quality are required Compatible with SPMG 0502 indexable inserts Suitable for Taegutec and YG-1 inserts Ø12.5 mm drill body with 38 mm cutting length 20 mm shank with 50 mm shank length Consistent hole quality through an indexable insert system The indexable insert concept used by this drill body separates the cutting edge from the toolholder, so wear is addressed by changing small inserts rather than replacing the whole tool. That approach reduces tooling costs and downtime while maintaining repeatable hole quality. With a Ø12.5 mm nominal diameter and a 38 mm cutting length, the design supports consistent chip control and dimensional stability across batch runs, making it suitable for serial production and workshop jobs that demand uniform results. Stable clamping and reduced runout for reliable machining A solid 20 mm shank and a shank length of 50 mm give the tool secure clamping in standard toolholders, improving rigidity and reducing runout. The resulting stability translates into improved surface finish and longer insert life, since the insert experiences lower deflection during cutting. The overall length of 106 mm and a tool weight of 0.158 kg contribute to manageable tool dynamics on milling heads and drilling spindles, ensuring the holder performs predictably in typical CNC setups. Flexible inventory and fast service life management Compatibility with well-known insert manufacturers such as Taegutec and YG-1 simplifies procurement and keeps spare-part stocks compact. Using SPMG 0502 inserts means cutting edges can be rotated or replaced quickly, shortening maintenance intervals and improving machine uptime. The modular nature of the drill body supports cost-effective tooling strategies: invest in robust holders and replenish low-cost inserts as required, which is especially advantageous for shops balancing quality and budget. Applications and operational fit The tool is engineered for environments that favour indexable insert drilling—job shops, subcontractors and production lines where predictable tool behaviour and straightforward insert changes are priorities. The holder's dimensions and compatibility profile permit integration into standard CNC tool magazines and manual drill setups that accept a 20 mm shank. For customers requiring tailored advice on integration or process parameters, technical specification matching can be provided to ensure optimal cutting conditions. For precision drilling and tooling advice on the Teknik Makina U812TM insert drill, contact Metav Werkzeuge for personalised recommendations and fast supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U812TM Manufacturer: Teknik Makina Diameter: 12.5 mm Cutting length: 38 mm Shank diameter: 20 mm Shank length: 50 mm Overall length: 106 mm Weight: 0.158 kg For indexable inserts: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Product type: Insert drill body FAQ Which inserts fit this insert drill? The insert drill U812TM accepts SPMG 0502 indexable inserts; it is compatible with inserts from Taegutec and YG-1 for straightforward replacement. What are the key dimensions to check when mounting the tool? Check the 20 mm shank and 50 mm shank length for holder compatibility, and confirm the 106 mm overall length fits the machine setup before use. Can the drill body be used in automatic tool changers? Yes, the geometry with a 20 mm shank and standard overall length is suitable for most CNC tool magazines when clamping and HSK/BT interfaces are compatible. How does insert replacement affect production uptime? Using indexable SPMG 0502 inserts reduces downtime: worn edges are rotated or replaced quickly, so the Teknik Makina U812TM holder remains in service while inserts are serviced. Is the U812TM suitable for small-batch production? The holder's flexibility and low-cost insert changes make the U812TM a practical choice for small-batch and mixed-production environments where quick tool changeovers are beneficial. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Solid Carbide Through Drill 36mm Cutting Length 45mm Shank Length, 94mm Overall - Teknik Makina
Take advantage of the combination of precise holemaking, compatibility with Korloy indexable inserts and a compact shank for stable clamping — all designed to keep cycle times low and tooling costs predictable. Order the indexable insert drill body directly via Metav Werkzeuge or ask our consultants if needed. Indexable Insert Drill Body U20TM — 12 mm diameter, 16 mm shank (Teknik Makina) A robust Indexable Insert Drill Body U20TM engineered for precision holemaking with Korloy XCMT 060204 indexable inserts in metalworking and toolroom applications. 12 mm cutting diameter 36 mm effective cutting length 16 mm precision shank Compatible with Korloy XCMT 060204 Accuracy and predictable hole quality for production runs The design delivers a consistent holemaking solution where repeatability matters. With a 12 mm diameter and an overall length of 94 mm, the tool body is dimensioned for a wide range of machining setups while retaining a compact footprint. The effective cutting length of 36 mm provides a well-defined engagement zone which helps stabilise the cutting forces; this stability is translated into more uniform hole diameters and reduced rework rates. Where tight tolerances are required, the use of an insert system ensures that cutting geometry can be restored precisely after each index or replacement. Indexable inserts for rapid service and lower running costs Compatibility with XCMT 060204 indexable inserts from Korloy gives shops a clear economic advantage: the cutting edge can be renewed by indexing or replacing the insert rather than regrinding the whole tool, reducing downtime and inventory complexity. The modular concept is particularly effective for mixed-batch production or when multiple grades of carbide are needed. The system is suited to pragmatic workshop logistics because different insert grades can be stocked independently from the body, enabling fast adaptation to varying materials and machining conditions. Stable clamping and toolholder integration A 16 mm shank with a 45 mm shank length ensures secure clamping in standard holders, which reduces vibration and improves surface finish. The relatively light mass (approx. 0.114 kg) also aids spindle balance for shorter overhangs, while the overall construction is optimised to transfer torque and resist deflection where drilling depth is moderate. These characteristics mean the drill body is readily integrated into existing toolholders and collet systems without elaborate fixturing, supporting efficient changeovers on the shopfloor. Workshop suitability and operational overview The component is supplied as a drill body compatible with established insert formats and is identified under SKU U20TM. Its layout supports conventional holemaking tasks across general steelworking and similar applications where indexable insert tooling is preferred for productivity and maintainability. Technical teams will appreciate that the modular approach simplifies maintenance planning and sharpens cost-per-hole calculation, enabling clearer decisions about tooling lifecycle and replacement strategy. For specification checks or to confirm fitment with a particular machine setup, further technical details can be provided. For tailored advice on Teknik Makina drill bodies and to confirm Korloy XCMT 060204 compatibility, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U20TM Manufacturer: Teknik Makina Designation: Indexable insert drill body (Vollbohrer) ECLASS: 21180201 Facts Diameter: 12 mm Overall length: 94 mm Cutting length: 36 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.114 kg Special features Compatible with Korloy XCMT 060204 inserts Suitable for indexable insert systems SKU: U20TM Manufacturer: Teknik Makina FAQ Which insert type fits this drill body? The drill body accepts XCMT 060204 indexable inserts; it is specified for use with Korloy insert geometry. What shank size is required for clamping? A 16 mm shank diameter and a 45 mm shank length are specified for stable clamping of the U20TM body. What hole depth can be achieved reliably? The effective cutting length is 36 mm, which defines the recommended engagement length for consistent drilling performance. Is the drill body suitable for general steelworking? Yes — the modular insert concept and the mechanical design of the U20TM make it well suited for typical steel machining where indexable tooling is preferred. How much does the tool weigh and how does that affect balance? The tool weight is approx. 0.114 kg; the relatively low mass helps maintain spindle balance at modest overhangs and supports smoother operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Solid Drill 27mm Cutting Length 45mm Shank Length, 85mm Overall - Teknik Makina
Take advantage of a compact, precision-oriented drilling solution that combines a 12 mm cutting diameter, a 27 mm cutting length and a secure 16 mm shank for reliable clamping and repeatable bore quality; order the Solid Drill U032TM directly via Metav Werkzeuge or ask our consultants if needed Solid Drill U032TM by Teknik Makina — 12 mm cutting diameter, 85 mm overall length A Solid Drill U032TM designed for precision drilling applications, offering a 12 mm cutting diameter and a 27 mm effective cutting length for controlled material removal Solid construction for consistent bore quality 12 mm cutting diameter with 27 mm cutting length Compatible with Korloy QC--060204 indexable inserts Consistent bore quality through defined cutting geometry The compact design delivers repeatable results by combining a controlled cutting length with a balanced flute profile. With a 12 mm diameter and 27 mm cutting length, the tool is engineered to create clean bores while limiting vibration; this reduces rework and improves spindle life. The cutting geometry is optimised for stable chip evacuation when used with compatible indexable systems, translating technical features into measurable productivity gains for production or job-shop environments. Secure clamping and machine compatibility for stable operation A solid shank arrangement provides dependable clamping and precise runout under load. The tool features a 16 mm shank and a 45 mm shank length, while the overall length is 85 mm, which ensures compatibility with standard collet chucks and toolholders that accept this shank size. The low mass (0.1 kg) reduces centrifugal imbalance at speed, so the component is suitable for toolholders where concentricity and rigidity are priorities. Proven insert compatibility and tooling flexibility Designed for use with indexable systems, the drill body accepts the specified insert type Korloy QC--060204, enabling quick insert changes and reduced downtime compared with regrinding solid cutters. This arrangement allows a workshop to combine the efficiency of indexable inserts with the precision of a rigid drill body. For users seeking higher process uptime, the modular approach simplifies inventory: keep a small number of bodies and a supply of inserts for fast turnarounds. Service, sourcing and workshop integration Supply and specialist advice are provided directly from a European distribution channel, ensuring steady availability and clear logistics. The product is delivered with concise specification data so that toolroom planners and buyers can verify fitment before installation. For complex setups or machine-specific queries, Metav Werkzeuge offers technical guidance and fast responses from its Emmerich location, helping to integrate the tool into existing machining cycles with minimal interruption. Contact Metav Werkzeuge for tailored advice on the Teknik Cutting Tools Solid Drill U032TM — technical support and supply directly from Emmerich, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U032TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Dimensions & measurable data Diameter: 12 mm Overall length: 85 mm Cutting length: 27 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.1 kg Compatibility & features Fits Korloy indexable inserts QC--060204 Designed for toolholders accepting 16 mm shanks Solid drill body type FAQ What insert type fits this drill body? The drill body accepts Korloy indexable inserts coded QC--060204, allowing fast replacement without regrinding the body Which shank size is required for the toolholder? The tool is supplied with a 16 mm shank and 45 mm shank length; the holder must accept a 16 mm diameter shank for secure clamping What are the primary dimensions to check before purchasing? Verify the 12 mm diameter, 85 mm overall length and 27 mm cutting length match the machining task and the available toolholder envelope Is this product suitable for high-speed spindles? The drill’s balanced design and low mass (0.1 kg) support rotational stability; final suitability depends on machine parameters and cutting data How are replacement inserts sourced? Replacement indexable inserts for the system are standard Korloy QC--060204 items; maintain an insert stock to reduce downtime Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Solid Drill for XC-- 060204 Indexable Inserts L72mm, 27mm Cutting Length - Teknik Makina
Take advantage of precise, indexable drilling with the combination of a 12 mm diameter, a 72 mm total length and direct compatibility with XC-- 060204 indexable inserts. Order directly via Metav Werkzeuge for reliable supply and expert consulting if additional technical information is required. 12 mm Solid Drill for XC-- 060204 Indexable Inserts (L72 mm) – Teknik Makina The 12 mm Solid Drill for XC-- 060204 Indexable Inserts is a compact indexable-drill body designed for reliable short-reach drilling in production and toolroom environments. 12 mm diameter for compact drilling Compatible with XC-- 060204 inserts 72 mm total length for limited reach 45 mm shank ensures stable clamping Precision and compatibility for productive machining The solid drill body is engineered for reproducible hole-making where changeable cutting edges speed up maintenance cycles. With a 12 mm diameter and 72 mm overall length, the tool combines compact geometry with sufficient reach for many common through-hole and short-depth applications. Compatibility with XC-- 060204 indexable inserts, including those by Ceratizit, enables fast index-and-go insert changes, reducing machine downtime and increasing throughput. The modular concept allows consistent hole quality without the need for full regrinding, which supports efficient batch processing and predictable cycle times. Stable clamping and straightforward servicing reduce downtime A 45 mm shank provides a secure interface for most collet and chuck systems, ensuring concentricity under machining loads and minimising runout. The 27 mm cutting length is optimised for chip evacuation in short-depth drilling, while the fastening arrangement—secured with a T7 Torx key and M2,2x5 Torx screw—permits rapid insert replacement and repeatable clamping torque. The indexed head arrangement means service technicians can restore cutting performance quickly, which translates into lower operating costs and more consistent component tolerances across production runs. Suitable workshop applications and supply confidence Designed for workshop and small-series production, this drill body (SKU U062TM) is light at 0.1 kg, easy to handle and intended for integration into CNC drilling cycles where indexable solutions are preferred. The modular design benefits maintenance teams and purchasing managers alike: spare inserts and screws are standardised, reducing inventory complexity. Metav’s position as a quality filter for the European market adds assurance—consistent availability from a centralised stock in Emmerich supports reliable replenishment and supplier consolidation for precision tooling needs. Contact Metav Werkzeuge for expert advice on Teknik Makina indexable drilling systems and to arrange timely supply – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: U062TM Product type: Solid drill Brand: Teknik Makina Label: 12mm Vollbohrer XC-- 060204 L72mm Data Diameter: 12 mm Total length: 72 mm Cutting length: 27 mm Shank length: 45 mm Weight: 0.1 kg Special features Compatible with XC-- 060204 indexable inserts Compatible with Ceratizit inserts T7 Torx key fastening Torx screw M2,2x5 Indexable head design SKU: U062TM FAQ Which indexable inserts fit this drill? The drill body accepts XC-- 060204 indexable inserts; compatibility with Ceratizit inserts is specified for the 12 mm Solid Drill (SKU U062TM). How is the insert secured to the drill head? Inserts are fastened using a T7 Torx key and an M2,2x5 Torx screw, allowing secure clamping and straightforward replacement for the Teknik Makina drill body. What applications suit this drill body best? The tool is designed for short-reach drilling in CNC machining and production workshops where quick insert changes and reproducible hole quality are priorities. What should be considered for clamping? Use a secure clamping system compatible with the 45 mm shank to ensure concentricity and minimise runout during operation of the solid drill. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Solid Drill for XC-- 060204 Indexable Inserts L72mm, 27mm Cutting Length - Teknik Makina
Benefit from accurate chip control and rapid insert changes thanks to compatibility with XC-- 060204 indexable inserts and a compact 12 mm cutting diameter; order the tool directly via Metav Werkzeuge or ask their consultants for application advice. Indexable-insert drill — 12 mm diameter, 72 mm overall length, Teknik Makina A 12 mm indexable-insert drill designed for use with XC-- 060204 indexable inserts, ideal for precision drilling in compact parts and production setups 12 mm cutting diameter for compact centres Compatible with XC-- 060204 indexable inserts Overall length 72 mm for deep-hole positioning Torx T7 screw with M2.2x5 fastening High performance from a compact diameter The compact 12 mm diameter provides a balance between access to confined spaces and the rigidity required for repeatable hole quality. By accepting XC-- 060204 indexable inserts, the tool combines the economy of replaceable cutting edges with the predictability of a rigid drill body. For machining centres that demand consistent bore tolerance and surface finish, this configuration reduces cycle-time variation and supports efficient tool rotation speeds while maintaining stability at the cutting edge. Predictable setup and depth control for serial work A total length of 72 mm and a clearly defined 27 mm cutting length deliver controlled engagement depth and straightforward tool set-up in a toolholder. The specified overall and cutting dimensions help to calculate safe overhang and runout allowances, which contributes to reduced vibration and extended insert life. The compact mass and measured geometry also aid in maintaining concentricity during high-volume production, translating into fewer scrap parts and a more predictable process window. Fast, secure inserts for lower downtime Insert retention uses a Torx T7 interface with an M2.2x5 fastening screw, providing repeatable, high-clamp reliability and simple serviceability. The standardised screw drive shortens changeover time and supports quick reconditioning of the cutting edge without specialised tooling. Together with the indexable-insert principle, this arrangement minimises machine downtime and keeps line output steady, which is particularly valuable in batch manufacturing and mixed‑series production. Designed for industrial use and straightforward logistics The drill body is supplied in a compact format and weighs approximately 0.1 kg, making handling and storage efficient for workshop environments. Compatibility with ISCAR-manufactured inserts and the clear SKU identification (U046TM) ease procurement and stock-keeping. The design suits CNC spindle applications where a reliable, exchangeable cutting system is preferred over solid-tool regrinding, supporting a pragmatic balance between lifecycle cost and machining performance. Discuss compatibility and availability with Metav Werkzeuge — contact the Metav specialists in Emmerich for technical guidance and delivery information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: U046TM ECLASS: 21180201 Label: 12mm Vollbohrer XC-- 060204 L72mm UID: U046TM Core data Diameter: 12 mm Overall length: 72 mm Cutting length: 27 mm Shank/holder length: 45 mm Weight: 0.1 kg Features & compatibility For XC-- 060204 indexable inserts Compatible insert maker: ISCAR Torx T7 screw, M2.2x5 fastening Product type: Indexable-insert drill FAQ What are the main dimensions of the tool? The indexable-insert drill (SKU U046TM) has a 12 mm diameter, 72 mm overall length and a 27 mm cutting length for controlled depth drilling. Which inserts fit this drill? This drill accepts XC-- 060204 indexable inserts; the assembly is compatible with inserts from ISCAR as specified. How are the inserts secured and serviced? Inserts are secured with a Torx T7 drive using an M2.2x5 screw, allowing secure clamping and quick replacement during routine maintenance. Is the tool suitable for CNC production? Yes — the drill body from Teknik Makina is designed for spindle mounting in CNC machines and for serial production where quick insert changes support uptime. What is the product SKU and weight for logistics? The product is listed as SKU U046TM and has an approximate weight of 0.1 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
13.5mm Solid Carbide Indexable Drill 39mm Cutting Length, 50mm Shank Length - Teknik Makina
Take advantage of a compact, indexable system that combines precision and low running costs for steady, repeatable holemaking; compatible inserts and a secure 20 mm shank ensure stable clamping and long tool life. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Indexable Insert Drill U813-1TM — Ø 13.5 mm, 20 mm shank (Teknik Makina) The Indexable Insert Drill U813-1TM is designed for precision holemaking in CNC and machining-centre environments, offering a compact profile and insert-based economics for medium-depth drilling operations. Ø 13.5 mm diameter for precise holemaking 20 mm shank for secure toolholder clamping 39 mm cutting length for through and blind holes Compatible with SPMG 0502 inserts (Taegutec, YG-1) Consistent, measurable accuracy for production runs The tool delivers consistent hole quality through a short, rigid geometry that reduces deflection in repeated cycles. With a nominal diameter of Ø 13.5 mm and an overall length of 107 mm, the design balances reach and stiffness to maintain concentricity. The effective 39 mm cutting length is suitable for many common through and blind-hole requirements, improving cycle predictability and lowering scrap rates. The combination of a compact body and reduced overhang contributes directly to higher first-pass yield and quieter running at standard spindle speeds. Secure clamping and stable cutting for repeatability A 20 mm shank ensures firm engagement with modern toolholders and minimises micro-movement under load, which supports stable cutting forces and extended insert life. The short holder interface (50 mm attachment length) increases tool rigidity and is compatible with conventional DIN-style clamping systems. This stable interface translates into reliable repeatability, particularly important when multiple identical holes are produced across batch workpieces. The modest mass (0.167 kg) also aids dynamic balance and reduces spindle load during high-speed indexing. Insert compatibility that reduces tooling expense Designed for use with SPMG 0502 indexable inserts and compatible with Taegutec and YG-1 grades, the system allows rapid insert replacement and the selection of grades optimised for specific materials. Using indexable inserts reduces total tooling cost per hole compared with resharpenable or solid drills, since only the insert is renewed when wear occurs. The modular approach enables tailored cutting-edge geometry—from roughing to finishing inserts—so process engineers can trade off metal removal rate against surface finish without replacing the whole tool body. Practical applications and straightforward implementation Suitable for general workshop and industrial applications within cutting tools & CNC workflows, the tool is ideal for medium-depth holes in a variety of ferrous and non‑ferrous materials when paired with an appropriate insert grade. Its compact geometry makes it suitable for close-tolerance bores in jigs, fixtures and machined parts. For setup, standard toolholder clamping and correct insert seating are the primary requirements; ensuring correct insert grade selection and machining parameters will deliver the full benefit of the indexable system in terms of tool life and process stability. Contact Metav Werkzeuge for technical matching and availability of the Teknik Makina U813-1TM — the Metav team in Emmerich can advise on insert grades, toolholders and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: U813-1TM Manufacturer: Teknik Makina Designation: Indexable insert drill ECLASS: 21180201 Facts Diameter: 13.5 mm Overall length: 107 mm Shank diameter: 20 mm Cutting length: 39 mm Attachment length: 50 mm Weight: 0.167 kg Insert type: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Special features Files: 62de7ec2148ec6b71020ffa5, 62de7dd70aced56449540e81 UID: U813-1TM FAQ What materials can be machined with this indexable system? The Indexable Insert Drill U813-1TM accepts inserts in different grades; with appropriate SPMG 0502 grades it can machine a wide range of materials from mild steel to aluminium and many non‑ferrous alloys. How does the 20 mm shank improve performance? A 20 mm shank provides a secure interface with standard toolholders, improving rigidity and reducing deflection, which in turn enhances the hole quality produced by the U813-1TM. Which insert manufacturers are compatible with this drill? The tool is compatible with SPMG 0502 inserts and listed to work with Taegutec and YG-1 insert ranges for quick replacement and grade selection. Is the drill suitable for blind holes as well as through holes? Yes. The 39 mm cutting length is suitable for many blind‑hole applications as well as through drilling, provided the chosen insert grade matches the material and cutting conditions. What is the overall length and how does it affect setup? The overall length is 107 mm; the compact profile improves stiffness and makes clamping setup more straightforward in confined tool magazines or tight-access machining situations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
13mm Solid Drill 39mm Cutting Length 50mm Shank Length, Compatible with SPMT 0502 - Teknik Makina
Combining a 13 mm cutting diameter, a 20 mm shank and a 39 mm cutting length, this insert drill body delivers precise, repeatable holemaking and stable tool life for indexable-insert operations. Order supply via Metav Werkzeuge or contact their consultants for application-specific recommendations. Insert drill body for Korloy SPMT 0502 – 13 mm diameter, 20 mm shank (Teknik Makina) An insert drill body, Insert drill body for Korloy SPMT 0502, engineered for efficient indexable-insert drilling in demanding machining environments Precision 13 mm cutting diameter 20 mm shank for secure clamping Compatible with Korloy SPMT 0502 inserts Reliable repeatability for accurate holemaking The insert drill body is designed to give consistent hole quality by combining a defined 13 mm diameter with a controlled 39 mm cutting length, reducing variability across production runs. Indexable inserts such as Korloy SPMT 0502 enable fast tool servicing: worn cutting edges are replaced rather than the entire tool, which keeps cycle times steady and simplifies inventory management. This configuration supports stable tolerances in serial production and reduces the need for frequent setup corrections. Secure clamping and reduced vibration for longer tool life A robust 20 mm shank and a 50 mm shank engagement provide firm support in the toolholder, which lowers run-out and suppresses chatter during drilling. The resulting improvement in cutting conditions contributes to long tool life and fewer scrap parts, translating into measurable productivity gains. Where high spindle stability is required, the combination of shank diameter and engagement length enhances process reliability and helps maintain dimensional accuracy over extended runs. Compatibility that simplifies tooling strategy Compatibility with Korloy SPMT 0502 indexable inserts allows quick inserts changes and standardised cutting geometry across different tool bodies, simplifying tool management on the shop floor. The compact overall length of 107 mm and a lightweight construction (0.154 kg) make handling and tool changes efficient without compromising rigidity. Metav Werkzeuge maintains stock and can advise on matching insert grades and clamping systems to align the insert drill body with specific machining strategies. For application-specific advice on implementing the Teknik Makina insert drill body with Korloy SPMT 0502 inserts, contact Metav Werkzeuge for local supply and guidance from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U004TM Brand: Teknik Makina Compatible inserts: Korloy SPMT 0502 Diameter: 13 mm Shank diameter: 20 mm Cutting length: 39 mm Shank length: 50 mm Overall length: 107 mm Weight: 0.154 kg Core dimensions Diameter: 13 mm Shank diameter: 20 mm Cutting length: 39 mm Shank length: 50 mm Overall length: 107 mm Weight: 0.154 kg Features Compatible with Korloy SPMT 0502 indexable inserts Insert type: SPMT 0502 SKU: U004TM Manufacturer: Teknik Makina FAQ Which insert types fit this drill body? The insert drill body is specified for Korloy SPMT 0502 indexable inserts and is supplied for that insert geometry to ensure correct seating and cutting orientation. What are the critical dimensions to check for holder compatibility? Key dimensions are the 13 mm cutting diameter, 20 mm shank diameter, and 107 mm overall length; these determine holder fit and required projection. How does the shank design affect performance? The 20 mm shank with a 50 mm engagement provides improved clamping stability and helps reduce vibration, which supports consistent cutting conditions and extends insert life. Is this product identified by a specific SKU and brand? Yes, the insert drill body is offered by Teknik Makina and listed under SKU U004TM for straightforward ordering and stock tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
13mm Solid Drill 39mm Cutting Length 50mm Shank Length, SPMG 0502 Compatible - Teknik Makina
Take advantage of the combination of rigid clamping, precise cutting length and indexable-insert compatibility for consistent hole quality. Order the tool via Metav Werkzeuge or consult the team for integration into CNC production. Indexable Insert Drill Body U813TM – 13 mm diameter, 20 mm shank (Teknik Makina) A robust indexable insert drill body Indexable Insert Drill Body U813TM engineered for precision drilling with SPMG 0502 inserts in metalworking and CNC environments. 13 mm cutting diameter for precision drilling 39 mm cutting length for deeper holes 20 mm shank diameter for rigid clamping Compatible with SPMG 0502 inserts (Taegutec, YG-1) Stable clamping for repeatable hole quality The solid tool body is designed around a 20 mm shank to deliver increased rigidity during operation. This reduced deflection helps maintain concentricity and lowers the risk of chatter, which in turn supports repeatable hole diameters and improved surface finish. The combination of short, focused cutting length (39 mm) and a compact overall length of 107 mm results in a stable machining setup that is easier to hold within standard toolholders, reducing setup time and the need for frequent rework. For production settings where consistency is critical, the tool body promotes reliable process capability through mechanical stability. Designed for indexable inserts to cut downtime Compatibility with SPMG 0502 indexable inserts and major insert manufacturers such as Taegutec and YG-1 allows rapid cutting-edge replacement without regrinding. The insert-based concept separates wear from the body, enabling quick tool changes and lower spare-part costs compared with solid-carbide solutions. In practice, this means shorter machine downtime and predictable maintenance intervals: worn inserts are exchanged quickly, while the drill body remains in service. The unit weight of 0.164 kg simplifies handling during tool changes and contributes to safe, efficient workshop routines. Practical integration and machining advantages The tool’s geometry balances effective chip removal and access to confined bores by combining a 13 mm diameter with the specified cutting length. The 50 mm uptake length and 20 mm clamping diameter ensure compatibility with common toolholders, supporting seamless integration into existing tool sets. The compatibility and straightforward mounting reduce qualification effort for new operations. Paired with the handling and supply approach from Metav, the drill body suits both small jobbing shops and structured production environments that value predictable performance and uncomplicated logistics. Contact Metav Werkzeuge to discuss the Teknik Makina U813TM indexable drill body for precise, low-downtime drilling in your facility — technical advice and order handling are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: U813TM Brand: Teknik Makina Product: Indexable insert drill body Item name: Vollbohrer (translated) Core technical data Diameter: 13 mm Overall length: 107 mm Cutting length: 39 mm Shank diameter: 20 mm Shank uptake length: 50 mm Weight: 0.164 kg Special features Compatible inserts: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Indexable-insert system for rapid edge changes Compact design for stable clamping and reduced runout FAQ What insert type is required for this drill body? The drill body accepts SPMG 0502 indexable inserts; compatible manufacturers listed include Taegutec and YG-1. What are the key dimensions to check for toolholder compatibility? Confirm the 20 mm shank diameter, the 50 mm uptake length, and the overall length of 107 mm to ensure correct seating in the toolholder. Is this drill body suited for deep-hole applications? With a 39 mm cutting length, the tool body is intended for moderate-depth holes where stability and chip control are priorities rather than extreme deep-hole drilling. How does the insert system affect workshop uptime? Using indexable inserts reduces downtime because worn cutting edges are replaced quickly while the drill body remains in use, improving overall machine availability. Which brand manufactures this product and who handles distribution? The product is supplied by Technik Makina and distributed through Metav Werkzeuge; the SKU is U813TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
13mm Solid Drill With 26mm Cutting Length, 50mm Shank - Teknik Makina
Take advantage of robust rigidity and precise holemaking thanks to the combination of a Ø 13 mm cutting diameter and a 20 mm shank for secure clamping; the replaceable-insert system (SÜMG 0502) provides economical reconditioning and fast tool changes. Order directly via Metav Werkzeuge or consult our technical advisors for insert recommendations and application support. Indexable insert drill body U913TM — Ø 13 mm, 26 mm cutting length, Teknik Makina Indexable insert drill body U913TM for precise holemaking in industrial production, compatible with SÜMG 0502 indexable inserts from Taegutec and YG-1 Compatible with SÜMG 0502 indexable inserts Ø 13 mm cutting diameter 26 mm effective cutting length 20 mm shank diameter for stable clamping Precision and rigidity for repeatable holes The modular design of this indexable-insert drill body delivers consistent diameter control and reduced cycle variation. With a Ø 13 mm cutting diameter combined with an effective cutting length of 26 mm, the component is engineered to hold hole tolerances tightly across repeated operations. The 20 mm shank provides increased stiffness in the chuck or adaptor, lowering deflection and improving surface finish. These attributes make the tool suitable for production environments where repeatability and reduced rework are priorities, and the indexable insert concept reduces downtime because only the insert requires replacement when wear occurs. Cost-effective machining through insert compatibility Instead of replacing entire solid drills, the insert system accepts SÜMG 0502 inserts from Taegutec and YG-1, enabling rapid edge renewal and lower tooling costs per hole. The tool body’s geometry is matched to common insert formats, which simplifies stockkeeping and allows the use of established, high-performance grades. The result is a favourable balance between lifecycle costs and machining performance; production planners will appreciate the predictability of maintenance intervals and the simplified logistics that arise from standardised insert families. Practical dimensions and workshop advantages Compact overall dimensions — 94 mm overall length and a shank length of 50 mm — balance accessibility in confined setups with sufficient reach for typical workpieces. The unit’s light mass (0.145 kg) reduces centrifugal stress at higher spindle speeds and contributes to safer handling during tool changes. Because the cutting edge is provided by reversible inserts, surface finish and hole integrity can be restored rapidly without the need for specialised grinding, improving uptime on the shop floor and maintaining throughput. Contact Metav Werkzeuge for tailored insert selection and application advice for this Teknik Cutting Tools drill body U913TM and arrange procurement or technical consultation directly with their specialists Technical data Article number: U913TM Manufacturer: Teknik Makina Product designation: Vollbohrer (indexable insert drill body) SKU: U913TM Facts Diameter: 13 mm Cutting length: 26 mm Shank diameter: 20 mm Shank length: 50 mm Overall length: 94 mm Weight: 0.145 kg Special features Compatible inserts: SÜMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Indexable-insert system for economical reconditioning Designed for stable clamping and reduced runout FAQ Which insert type fits this drill body? The drill body is designed for SÜMG 0502 indexable inserts; compatible insert manufacturers listed are Taegutec and YG-1. What are the key dimensions for the tool? The tool has a Ø 13 mm cutting diameter, 26 mm cutting length, 20 mm shank diameter, 50 mm shank length and 94 mm overall length. Is the cutting edge included with the drill body? The supplied data specifies compatibility with SÜMG 0502 inserts; the presence of inserts in delivery is not stated and should be confirmed when ordering the U913TM. What advantages does the insert system offer for production? Using SÜMG 0502 inserts reduces downtime for edge changes, lowers lifecycle cost per hole and simplifies spare-part management compared with solid drills. Who manufactures the tool and what is the SKU? The tool is supplied under Teknik Makina and is identified by SKU U913TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
13mm Solid Drilling Head For Taegutec SOMT 0502 Inserts 50mm Shank, 39mm Cutting Length - Teknik Makina
Take advantage of a compact, high-performance drill body that pairs 13 mm nominal diameter with a 20 mm shank for reliable clamping and stable holemaking; the construction and 39 mm cutting length help reduce tool changes and keep cycles running smoothly — order via Metav Werkzeuge or request technical advice from our specialists. Indexable Insert Drill Body U300TM — 13 mm diameter, 20 mm shank by Teknik Makina The Indexable Insert Drill Body U300TM is an industrial cutting tool designed for efficient, precision holemaking in CNC machining where insert-based drilling provides quick index changes and consistent geometry 13 mm nominal diameter 20 mm shank for secure clamping Optimised 39 mm cutting length Consistent hole quality through controlled geometry The drill body delivers repeatable performance by combining a precisely machined toolholder with a short, effective cutting section. With a 39 mm cutting length and 111 mm overall length, the geometry is balanced to reduce vibration and maintain concentricity in demanding cycles. For shops focused on tight tolerances, the tested design ensures the insert seat and pocket are maintained within narrow limits so that indexable inserts run true and produce consistent bore finishes. This reduces rework and supports predictable cycle times on CNC lathes and machining centres. Fewer interruptions thanks to quick insert changes Designed for insert-based operation, the tool minimises downtime by allowing rapid replacement of worn cutting edges rather than exchanging whole tools. The combination of a compact cutting zone and accessible clamping screws means insert swaps are carried out fast, improving overall equipment effectiveness. The body’s low mass (approx. 0.157 kg) and 20 mm shank help keep tool inertia low while retaining secure clamping, which contributes to smoother toolpaths and longer periods between interventions. Compatibility with established insert manufacturers simplifies stock management and cost calculations. Robust shank and secure mounting for industrial use A robust mounting interface with a 20 mm shank and a 50 mm shank length provides a stable connection to toolholders, reducing the risk of chatter under moderate feeds and depths. The solid construction supports standard machining parameters and is suitable for integration into existing toolsets where Taegutec and comparable insert systems are used. Measured dimensions and the compact form are ideal for confined setups, and the tool’s balance between stiffness and accessibility supports both serial production and bespoke components alike. Contact Metav Werkzeuge for tailored compatibility advice on Teknik Makina tools; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U300TM Manufacturer: Teknik Makina Diameter: 13 mm Overall length: 111 mm Cutting length: 39 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.157 kg Compatible insert manufacturer: Taegutec Special features Indexable insert concept Compact cutting zone for reduced vibration Low mass for responsive behaviour Machined insert seat for consistent positioning FAQ What insert systems does the drill body accept? The drill body is designed to be compatible with inserts from Taegutec and comparable indexable systems; check the insert type required for specific seat geometry before mounting. What are the key dimensions for toolholder selection? Key dimensions include a 20 mm shank diameter, 50 mm shank length and 111 mm overall length, which are relevant when selecting collets or hydraulic chucks for mounting the tool. How does the design reduce downtime? By using indexable inserts the body allows quick edge changes; worn inserts are replaced individually, reducing the need to change the whole tool and keeping production moving. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
13mm Solid Drilling Head SPMG 0502 Insert-Compatible 52mm Cutting Length, 20mm Shank - Teknik Makina
Take advantage of the combination of precise holemaking, wide compatibility with SPMG 0502 indexable inserts and a compact 20 mm shank for easy toolholder integration; order supply through Metav Werkzeuge or request technical advice from our consultants for fast procurement. Indexable insert drill U713TM by Teknik Makina — 13 mm diameter, for SPMG 0502 inserts The indexable insert drill U713TM is a compact drill body engineered for precision drilling operations in general machining, compatible with SPMG 0502 indexable inserts from leading manufacturers and suited to standard toolholders. *Compatible with SPMG 0502 insert type *13 mm nominal diameter *52 mm effective cutting length *20 mm shank for standard toolholders Precise drilling with proven insert compatibility The U713TM offers repeatable hole accuracy through a defined cutting geometry that accepts SPMG 0502 indexable inserts from Taegutec and YG-1. This compatibility enables quick insert exchange and consistent machining results across batch runs. For operations where setup time matters, the use of standardised inserts reduces downtime and simplifies inventory management. The compact design and measured cutting length make the tool suitable for through-holes and shorter blind holes when reliable concentricity is required. Stable cutting performance and toolholder integration With a 20 mm shank and a total length of 120 mm, the tool body integrates smoothly with common toolholders while providing sufficient overhang for many workshop applications. The 52 mm cutting length balances accessibility and rigidity, reducing chatter in typical metalworking setups. At approximately 0.17 kg, the assembly is lightweight yet robust enough for frequent insert changes, supporting efficient cycle times and predictable tool behaviour under standard machining feeds and speeds. Practical setup advice for consistent results When assembling the drill body, ensure inserts are correctly seated and torque settings on the clamp screws follow the insert manufacturer’s guidance. The U713TM’s design accommodates indexable inserts to facilitate rapid tool reconditioning; keeping an inventory of SPMG 0502 inserts from Taegutec or YG-1 allows immediate replacement and sustained tool life. For users less familiar with indexable systems, simple checks such as verifying seat cleanliness and clamp engagement will prolong cutting performance and maintain hole quality. For procurement of Teknik Cutting Tools indexable insert drill bodies such as the U713TM, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U713TM Manufacturer: Teknik Makina Compatible insert type: SPMG 0502 Compatible insert makers: Taegutec, YG-1 Core specifications Diameter: 13 mm Overall length: 120 mm Cutting length: 52 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.17 kg Materials & features Indexable insert drill body design Suitable for standard toolholders Designed for quick insert change FAQ Which inserts fit this drill body? The drill body accepts SPMG 0502 indexable inserts; recommended suppliers are Taegutec and YG-1 for direct compatibility with this design. What is the nominal diameter and overall length? The tool is specified at 13 mm nominal diameter with an overall length of 120 mm, providing a 52 mm cutting length for controlled reach and rigidity. Which shank size is required for mounting? The U713TM uses a 20 mm shank, suitable for common 20 mm toolholders and clamping systems. Is this suitable for blind holes? Yes; with a 52 mm cutting length the tool is appropriate for many blind-hole applications provided coolant and chip evacuation are managed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14,5mm Indexable Drill for Taegutec and YG-1 SPMG 0502 inserts - Teknik Makina
Technical Data: Order Number: U814-1TM Item: Indexable Drill usable with SPMG 0502 Indexable Inserts of Taegutec und YG-1 Brand: Teknik Makina Metric Information: Diameter: 14,5mm Weight: 0.17kg Total length: 110mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
14.5mm Solid Drill 42mm Cutting Length, 50mm Shank Length - Teknik Makina
Product data inconsistent: the item is designated "Vollbohrer" (solid drill) while compatibility fields reference indexable inserts (SOMT 0502, Taegutec). Please verify the product information and supply corrected specifications, ensuring that all details, including the product name, description, and compatibility fields, are accurate and align with the intended use or application of the item to avoid confusion or potential errors in selection, procurement, or usage. It is essential to confirm whether the item is indeed a solid drill or if it is designed to work with indexable inserts, as this discrepancy could impact its functionality, performance, and suitability for specific tasks or machining operations.
Schnellere Fertigung durch präzise Vollbohrer für industrielle Bearbeitungen
Vollbohrer, auch bekannt als Massivbohrer oder Durchgangsbohrer, sind speziell entwickelte Zerspanungswerkzeuge zum direkten Einbringen von Bohrungen in massives Werkstückmaterial. Sie werden bevorzugt auf Drehmaschinen und Bearbeitungszentren eingesetzt, um in einem einzigen Arbeitsgang große Materialvolumina wirtschaftlich abzutragen.
Effiziente Funktion und technischer Kontext für robuste Anwendungen
In der Praxis ermöglichen Vollbohrer das Bohren ohne vorheriges Zentrieren oder Vorbohren, wodurch Rüstzeiten reduziert werden. Bei Varianten ohne Innenkühlung wird der Kühlschmierstoff über externe Maschinendüsen zugeführt; diese Auslegung ist jedoch nur bei extrem kurzen Bohrtiefen und sehr leicht zerspanbaren Materialien geeignet, da produzierte Späne den Bohrkanal schnell verschließen können. Industrieller Standard sind Vollbohrer mit Innenkühlung: durch den Werkzeugkörper verlaufende Kanäle transportieren das Kühlmittel unter hohem Druck direkt an die Schneiden der Bohrerspitze. Dadurch werden Reibungswärme abgeführt und Spänemengen zuverlässig aus dem Bohrloch gespült, was ein Festklemmen, Riefenbildung und plötzliche Werkzeugbrüche effektiv verhindert.
Optimierte Produktion: Konkrete Vorteile für die Fertigung
- Reduzierte Rüstzeit durch Bohren in einem Arbeitsgang mit Vollbohrer oder Einstufenbohrer.
- Verbesserte Spanabfuhr dank innenliegender Kühlmittelkanäle, die die Standzeit verlängern.
- Minimiertes Bruchrisiko durch gezielte Kühlung und Druckspülung an der Bohrerspitze.
- Höhere Prozesssicherheit bei der Bearbeitung großer Materialvolumina auf Bearbeitungszentren.
- Anpassbar an Maschinentyp: Vollbohrer und Durchgangsbohrer sind für Drehmaschinen und Fräszentren verfügbar.
Metav als starker Partner für Beschaffung und Beratung
Metav fungiert als Qualitätsfilter und bietet mit Sitz in Emmerich ein lückenloses Sortiment für präzise Werkzeuge. Mit über 48.000 Kunden und mehr als 250.000 Produkten reduziert Metav die Lieferantenanzahl und liefert verlässlich an die Werkbank. Das Sortiment umfasst sorgfältig ausgewählte Vollbohrer, Massivbohrer und Durchgangsbohrer sowie Beratung zur richtigen Auslegung von Innenkühlung und Schneidengeometrie.
Kurz und prägnant: Wann Vollbohrer die beste Wahl sind
Für Anwendungen, in denen Bohren in einem Durchgang, sichere Spanabfuhr und maximale Prozesssicherheit gefordert sind, sind Vollbohrer die bevorzugte Lösung. Vollbohrer sowie die Varianten Massivbohrer und Durchgangsbohrer sorgen für effiziente, zuverlässige Bohrprozesse in der Serien- und Einzelfertigung.
FAQ
Was ist der Unterschied zwischen Vollbohrer mit Innenkühlung und ohne Innenkühlung?
Vollbohrer mit Innenkühlung führen das Kühlmittel durch Kanäle im Werkzeugkörper direkt an die Schneide und ermöglichen so effektive Wärmeabfuhr und Spantransport; Varianten ohne Innenkühlung werden von außen über Maschinendüsen gekühlt und eignen sich nur für sehr kurze Bohrtiefen und weiche Materialien.
Warum reduziert die Innenkühlung das Risiko von Werkzeugbruch bei Vollbohrern?
Die Innenkühlung führt das Kühlmittel unter hohem Druck an die Bohrerspitze, wodurch Reibungswärme reduziert und Späne aus dem Bohrloch gespült werden; dadurch werden Festklemmen und riefenbildung vermieden, was Werkzeugbrüche verhindert.
Auf welchen Maschinentypen werden Vollbohrer typischerweise eingesetzt?
Vollbohrer und ihre Synonyme Massivbohrer sowie Durchgangsbohrer werden hauptsächlich auf Drehmaschinen und Bearbeitungszentren eingesetzt, dort ermöglichen sie das wirtschaftliche Abtragen großer Materialmengen in einem Arbeitsgang.
Wie unterstützt Metav bei der Auswahl des passenden Vollbohrers?
Metav bietet ein umfangreiches Sortiment und fachkundige Beratung aus Emmerich; Kunden profitieren von Produktauswahl, technischen Informationen zur Innenkühlung und Empfehlungen für die passende Schneidengeometrie.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com