Twist Drill — Type N Short HSS-G (Diameter 5.5 mm, 135° point, Bright Finished) by MetavCUT

The Twist Drill is a short Type N HSS-G metal drill designed for high-precision drilling in hard materials with a 5.5 mm diameter and a 135° point angle for improved centring and reduced chipping

• Short design for enhanced stability and precision
• Fully ground shank for high Runout accuracy
• Optimised 135° point for hard metals
• Conforms to DIN 338 for short twist drills
• Faster drilling with lower feed force in steel

Precision Cutting Power for Hard Materials

The Twist Drill in HSS‑G quality offers concentrated cutting performance for demanding metalworking tasks. Its 5.5 mm Diameter combined with a 135° Point Angle reduces the tendency to grab and improves centring in Stainless Steel and other hard alloys. The short overall length minimises overhang and vibration, which results in consistently cleaner Holes and longer tool life when used with appropriate Cutting Fluid. DIN 338 compliance ensures reproducible geometry for industrial and workshop applications.

Short Geometry for Greater Stability and Faster Results

A reduced Free Length makes this drill far less prone to bending during operation. The Short version with a Spiral Length of 57 mm and a Total Length of 93 mm is particularly suited to operations where stiffness and accuracy matter, including work on lathes, drill presses and hand Drilling Machines. The Fully Ground flute geometry produces sharp cutting edges and excellent Roundness, enabling up to 40% faster drilling and requiring 50% less feed force compared with conventional HSS drills in comparable conditions.

Designed for Metalworkers and Precision Workshops

This Type N Twist Drill is targeted at professionals and advanced hobbyists who process alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. The typical user benefits from precise hole dimensions and excellent surface finish, especially in materials that demand a 135° tip geometry. For applications that require repeatable accuracy, the Profi Line series by MetavCUT provides robust performance and reproducible results.

Correct Use, Sharpening and Material Guidance

The 135° Point is specially chosen for harder materials because a larger point angle shortens initial penetration time and improves tool life. Point sharpening reduces the cross‑cut at the tip, lowering friction and necessary feed force while improving centring in the workpiece. HSS‑G (ground high speed steel) stands for very sharp cutting edges and high Roundness, yet it can be more brittle than rolled variants; therefore, secure clamping and coolant are recommended to avoid breakage and to extend service life.

Strong recommendation: Choose the MetavCUT Twist Drill Type N short HSS‑G for demanding metal drilling tasks — for personalised advice or further technical data contact METAV Werkzeuge for expert support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271

• Designation: Twist Drill (Spiralbohrer)
• Brand: MetavCUT
• SKU: 48055-FDA
• Diameter: 5.5 mm
• Point Angle: 135°
• Type: Type N
• Execution: Short
• Material: HSS-G
• Colour: Bright finished
• Shank Finish: Fully ground
• Spiral Length: 57 mm
• Total Length: 93 mm
• Application: Drills for metal
• Model Series: Profi Line
• Standard: DIN 338
• Suitable For: Drilling Machine (Hand Drilling Machine)
• Packaging Unit: 10
• Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What is a Twist Drill used for and where does the MetavCUT Twist Drill perform best?
The MetavCUT Twist Drill (Type N, HSS‑G) is mainly used for machining High‑Strength materials and larger drill diameters; it excels when drilling alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics because its geometry and material withstand higher loads while delivering precise holes.

Which three main drill types exist?
The three common drill categories are Metal drills, Wood drills and Stone/Concrete drills, each optimised in geometry and material for their specific substrate.

Why are Twist Drills pointed?
Pointing the tip reduces the Cross‑Cut at the Drill’s tip, which lowers friction and required feed force; this sharpening also improves centring in the Workpiece and results in cleaner holes.

Can a Metal (HSS) drill be used for wood?
A Metal drill can be used in Wood, but the guidance is worse and the hole finish is typically less clean; however, such drills are easier to resharpen and show less self‑pulling into the material than specialised wood drills

Are you unsure whether this Twist Drill meets your requirements or need additional technical data? METAV Werkzeuge offers extensive, competent consultation — please contact us by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271