MetavCUT Twist Drill — Short HSS‑G Twist Drill (Ø 8.1 mm, 135° Tip, Type N, Bright Finished, DIN 338)

The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking, offering a bright finished surface and a 135° tip for improved entry into hard materials.

• Short HSS-G design for increased stability
• 8.1 mm diameter for precision metal drilling
• 135° tip for harder materials like stainless steel
• Fully ground shank for high concentricity
• Compliant with DIN 338 for short Twist Drills

Stability and faster drilling for demanding metalwork

Short design combined with HSS‑G grinding provides tangible advantages in daily workshop use. The reduced overhang reduces vibration and bending so that drilling stays precise even under higher loads. Because the Flute Geometry is CNC‑ground, the drill cuts with sharply defined edges; this results in up to 40% faster drilling and requires about 50% less thrust than comparable conventional HSS tools, which reduces operator fatigue and machine wear. Users benefit from cleaner holes and improved tool life when used with appropriate cooling.

Reliable performance in hard and alloyed steels

A 135° Tip reduces the tendency to wander on hard surfaces and shortens the initial drilling time for tougher materials such as Stainless Steel and alloyed Steels. As a Type N normal‑spiral Twist Drill, this tool is optimised for Metal applications and provides consistent chip evacuation under typical machining conditions. Compliance with DIN 338 ensures that dimensions and tolerances match workshop expectations for short Twist Drills, making the drill an efficient choice for production and repair tasks where reproducible results matter.

Built for precision and concentricity

The Fully Ground Shank and accurate manufacturing in the Profi Line series deliver high concentricity at the chuck. This construction minimises runout and produces rounder, more accurate holes when compared to rolled alternatives. For work on stationary or mobile machine tools, the short overall length improves rigidity and gives craftsmen more control during finishing and reaming operations. For those who recondition tools, the ground geometry is also simpler to resharpen while maintaining cutting accuracy.

Practical guidance and application areas

This Twist Drill has been developed primarily for drilling in a range of metals including alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The short flute length (Spiral Length 75 mm) and total length of 117 mm make it especially suitable for precision work on machine tools and hand drills where stability is essential. If unsure whether this drill meets a specific application, METAV Werkzeuge offers expert consultation to advise on performance, cooling strategy and feed rates.

Why choose this short Profi Line Twist Drill

Manufacturing choices such as the grinding process (HSS‑G) result in sharper cutting edges and superior running accuracy. That precision translates into fewer rejects, less rework and a measurable increase in productivity in workshop environments. For operators facing frequent drilling in harder materials, the combination of Short Design and 135° Tip delivers a practical balance of durability and cutting performance without sacrificing control.

Strong recommendation: Choose the MetavCUT Profi Line Short Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271)

Technical Information

• Designation: Twist Drill
• Brand: MetavCUT
• SKU: 48081-FDA
• Model Series: Profi Line
• Type: Typ N
• Diameter: 8.1 mm
• Spiral Length: 75 mm
• Overall Length: 117 mm
• Tip Angle: 135°
• Material: HSS-G
• Execution: short
• Shank Execution: fully ground
• Colour: bright finished
• For Drill Machine: Drilling Machine
• Norm: DIN 338
• Application: Drills for metal
• Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What is the main advantage of a short Twist Drill like the MetavCUT Twist Drill?
A short Twist Drill such as the MetavCUT Twist Drill offers greater stability and less tendency to bend, which improves precision when drilling hard materials; the reduced overhang also means cleaner holes and more consistent results on machine tools.

Is the MetavCUT Twist Drill suitable for stainless steel and hardened material?
Yes, the MetavCUT Twist Drill with its 135° Tip and HSS‑G geometry is particularly suited to harder Materials including Stainless Steel; the tip angle shortens entry time and the ground flutes maintain sharpness for effective cutting.

What are Twist Drills used for?
Twist Drills are mainly used for machining high‑strength materials and for larger drill diameters. The shape is easy to resharpen and withstands greater loads, making it suitable for demanding metalworking tasks.

Which three drill types exist?
The three common drill types are Metal Drills, Wood Drills and Stone/Concrete Drills.

Why are Twist Drills pointed?
Pointing reduces the chisel edge at the tip of the Twist Drill. Pointing decreases friction forces, which lowers the required feed force and helps the drill to centre more reliably in the workpiece.

Can a metal drill be used in wood?
A Metal Drill can be used in Wood, but guidance is reduced and the hole finish is usually not as clean. Metal Drills are easier to resharpen and typically have less self‑feeding tendency than dedicated wood drills.

For which drilling depths is the Twist Drill most commonly used?
A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool.

What is better, HSS or HSSE?
The common assumption that HSSE is always superior to HSS is not universally correct. When choosing between HSS and HSSE, evaluate whether your working conditions justify the higher cost of HSSE.