75-100mm Micrometer, 0.01mm, Ratchet Stop, Calibrated to ISO 17025 - Microtech Metrology
€73.00
Product information "75-100mm Micrometer, 0.01mm, Ratchet Stop, Calibrated to ISO 17025 - Microtech Metrology"
Combining 0.003 mm accuracy, a ratchet stop for repeatable contact pressure and an ISO 17025 calibration certificate, this micrometer ensures traceable results for workshop quality control. Order the instrument directly via Metav Werkzeuge or contact our technical team for application advice.
Outside Micrometer — Precision measuring instrument by Microtech Metrology
The Outside Micrometer is a robust analogue micrometer for precise external measurements across a 75–100 mm range, ideal for workshop and inspection use.
- High accuracy 0.003 mm
- Ratchet stop for consistent pressure
- ISO 17025 calibration certificate included
- Measurement range 75–100 mm
Accurate measurement where it matters
Designed for demanding measuring tasks, the micrometer offers a proven 0.003 mm accuracy that reduces measurement uncertainty and supports reproducible results. The analogue spindle with a fine 0.01 mm scale allows clear readings while the robust anvil (Ø6.5 mm) stabilises contact. This combination is especially advantageous when components must meet tight tolerances or when a simple, reliable tool is needed at the inspection bench.
Consistency and traceability for production and QC
A ratchet stop on the thimble enforces a uniform measuring force, preventing variations caused by operator pressure and improving repeatability between measurements. Supplied with an ISO 17025 calibration certificate, the instrument arrives traceable to recognised laboratory standards, which supports internal quality systems and simplifies documentation for audits and conformity checks.
Workshop friendly design and practical benefits
Built as an analogue micrometer, the unit combines rugged simplicity with workshop resilience: there are no batteries to replace and maintenance is straightforward. The 75–100 mm measuring span covers many medium‑sized parts produced in metalworking and tooling shops. For those integrating tools into existing workflows, the micrometer’s compact frame and ratchet control make it easy to use alongside gauges and calipers, supporting fast inspection cycles without compromising precision.
Strong recommendation: choose the Microtech Metrology Outside Micrometer with ISO 17025 calibration for critical measurement tasks — available through Metav Werkzeuge; contact info@metav-werkzeuge.com for technical assistance or order support.
Produktmerkmale
- Artikelnummer: 110111001
- Marke: Microtech Metrology
- GTIN: 4061905459146
- Kategorie: Messschrauben
Daten
- Messbereich: 75–100 mm
- Genauigkeit: 0,003 mm
- Ablesung: 0,01 mm
- Amboss Ø: 6,5 mm
Besonderheiten
- ISO 17025 Kalibrierung: Kalibrierzeugnis mitgeliefert (Ilac MRA)
- Ratschenanschlag
- Analoges Messgerät
- ECLASS: 21170328
FAQ
Which measurement range does this micrometer cover?
The Outside Micrometer from Microtech Metrology covers a 75–100 mm range and is supplied under SKU 110111001.
Is a calibration certificate included with the instrument?
Yes, the Microtech Metrology micrometer (SKU 110111001) is delivered with an ISO 17025 calibration certificate for immediate traceability.
How does the ratchet stop improve measurements?
The ratchet stop on the Microtech Metrology Outside Micrometer ensures consistent contact force during each measurement, reducing operator‑induced variation and supporting reliable results.
Is the device analogue or digital?
This is an analogue micrometer with a 0.01 mm scale and a rated accuracy of 0.003 mm, manufactured by Microtech Metrology (SKU 110111001).
Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
Zubehör
Cable — USB for digital calipers and indicators by Microtech Metrology The Cable USB for digital calipers and indicators delivers direct USB‑HID data transfer for Microtech Certi Met devices, enabling simple keyboard‑style input to measurement apps and PC software. USB HID data transfer (keyboard emulation) 2 m length for flexible workstation placement One‑button data capture for fast logging Compatible with Certi Met digital calipers and indicators IP54 Direct transfer to apps and PC via dongle Reliable data flow for measurement workflows The Cable provides stable USB HID connectivity that behaves like a keyboard, so measurement values appear directly in spreadsheets or inspection software without special drivers. This makes data capture straightforward for QA stations and workshop benches. Thanks to the one‑button trigger, single‑handed operation is possible, reducing handling time and the risk of transcription errors when recording measurements from Certi Met instruments. Easier connectivity than U‑WAVE technology of Mitutoyo — practical benefits Microtech data transfer is simpler than U‑WAVE technology of Mitutoyo because no separate connectors or multiple transmitters are required. A single dongle receives data on a PC, while transfers to iPhone, iPad and Android smartphones occur directly from the measuring instrument. This setup lowers installation effort and reduces points of failure, which is particularly valuable for mobile inspections and fast production checks. Designed for robust workshop use and compatibility The Cable matches Certi Met Digital calipers IP54 and Certi Met Digital indicators IP54, offering a rugged solution for typical shopfloor conditions. The 2 m length allows flexible placement without strain, and the HID keyboard emulation ensures broad compatibility with third‑party apps and measurement systems. For users who rely on consistent, repeatable logging, this accessory integrates seamlessly into existing workflows and SPC processes. Consistent measurements through measurement force control and handling tips When paired with instruments that offer measurement force control, readings become more reproducible: the force is set manually as required for the material, and the instrument records the value only once the preset force is reached. This reduces variability on soft or pliable parts. For best results, secure the part, apply the caliper smoothly, and use the Cable’s one‑button capture to log the stabilized value directly into your software. Choose Microtech Metrology accessories for dependable USB‑HID capture — for personalised advice and setup assistance contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Cable Brand: Microtech Metrology SKU: 141083000 Product type: USB for digital calipers and indicators Data output: USB‑HID (keyboard emulation) Length: 2 m Key features: One‑button data transfer, direct data input to apps and PC, HID mode Compatible with: Microtech Certi Met Digital calipers IP54 and Certi Met Digital indicators IP54 Shop description: Kabel USB für digitale Messschieber und Messuhren, rascher Versand, weitere 36.000 Werkzeuge für Profis UID: 141083000 Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How does the Cable connect to my PC and mobile devices? The Microtech Metrology Cable uses USB‑HID to emulate a keyboard for direct PC input; for PC logging a single dongle receives the data, while transfers to iPhone, iPad and Android smartphones are sent directly from the measuring tool, so the Cable integrates smoothly with common apps and inspection software. Can the Cable ensure repeatable readings with different materials? Used with instruments that have manual measurement force control, the Cable helps capture repeatable values because the instrument records readings only when the preset force is reached; this is especially useful for delicate or compressible parts and improves reproducibility in production checks. What is a Messschieber? Calipers are cool. A caliper is a precision tool for measuring external, internal and depth dimensions; the Microtech Metrology Cable for USB for digital calipers and indicators simplifies transferring those cool measurements directly into documentation and apps. What is a Maulkorb? A muzzle is for dogs that behave poorly. The Microtech Metrology Cable for USB for digital calipers and indicators is unrelated, it simply transfers measurement values reliably.