Petri Dish Halter — Height-Adjustable Holder for RK-10A Table Stands by Dino-Lite The Petri Dish Halter is a height-adjustable Petri Dish Holder designed to enable inverted and upright viewing when mounted on a Dino-Lite RK-10A tabletop stand for laboratory and inspection workflows. Compatible with RK-10A tabletop stands Height-adjustable two-way configuration for inverted/upright viewing Optimized for stable Petri dish positioning in microscopy Manufactured in Taiwan and ROHS compliant Robust Construction for Reliable Sample Handling The Petri Dish Halter offers a sturdy, height-adjustable configuration that secures Petri Dishes for both inverted and upright observation when used with an RK-10A stand. The design reduces handling time during inspections and supports consistent working distances, which improves repeatability of observations. Built to integrate with Dino-Lite accessories, the holder enables stable positioning without touching the microscope or specimen during routine adjustments. Streamlined Workflow and Practical Laboratory Use Designed for workflows that require quick transitions between imaging modes, the Petri Dish Halter simplifies specimen handling by providing a repeatable mount point for Petri Dishes. The two-way orientation capability supports a broader range of samples and illumination techniques, allowing efficient switching from top illumination to backlighting or other methods. This results in fewer interruptions, faster throughput, and improved focus consistency for microscopy tasks. Who Benefits from This Holder Laboratories, educators, hobbyists, and quality-control technicians who pair a Dino-Lite microscope with an RK-10A stand gain from the Petri Dish Halter’s targeted functionality. The accessory is particularly valuable when delicate samples demand non-contact focus adjustments or when reproducible imaging angles are needed for documentation and comparison. Strongly recommended for RK-10A setups — METAV Werkzeuge offers detailed technical advice and application support; contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Key Product Features Height-Adjustable Two-Way Configuration The holder provides a flexible Height-Adjustable mechanism permitting both Inverted and Upright viewing modes, enabling compatibility with diverse sample types and different illumination strategies. This adaptability reduces the need for manual repositioning of specimens and preserves sample integrity during inspection. Designed Specifically for RK-10A Integration Engineered for direct compatibility with the Dino-Lite RK-10A tabletop stand, the holder mounts securely to the stand’s fixture to ensure stable specimen placement. Integration minimizes wobble during focusing and supports consistent imaging, especially when using fine-focus adjustments on the microscope. Laboratory-Grade Compliance Manufactured in Taiwan and meeting ROHS standards, the accessory is suited for controlled environments where material compliance and consistent manufacturing quality are required. Warranty coverage supports dependable use in routine lab applications. Technical Specifications Product Type: Height-Adjustable Petri Dish Holder for Tabletop Stands Compatibility: Compatible with Dino-Lite RK-10A Stand only Functionality: Two-way configuration for Inverted and Upright viewing Regulatory Approval: ROHS Warranty Period: 2 years Manufactured In: Taiwan Manufacturer: Dino-Lite Manufacturer / Contact (supplier information): AnMo Electronics Corporation; 17F-1, No. 97, Sec. 4, Chongxin Road, Sanchong Dist., New Taipei City 241513, Taiwan; Tel:+886-2-29749126; E-Mail:Sales@anmo.com.tw FAQ What is the main purpose of the Petri Dish Halter from Dino-Lite? The Petri Dish Halter by Dino-Lite is designed to securely hold Petri Dishes for both inverted and upright observation when used with an RK-10A stand, improving repeatable sample positioning and easing imaging workflows. Is the Petri Dish Halter compatible with other Dino-Lite stands? The Petri Dish Halter is specifically compatible with the Dino-Lite RK-10A tabletop stand; other stand models are not listed as compatible in the product information. Can the Petri Dish Halter support backlighting or specialized illumination? Yes, the Petri Dish Halter’s two-way configuration facilitates different illumination techniques including backlighting or top illumination when mounted on a Dino-Lite RK-10A stand, enabling flexible observation methods. What warranty and standards apply to the Dino-Lite Petri Dish Halter? The Dino-Lite Petri Dish Halter includes a 2-year warranty and is manufactured in Taiwan in compliance with ROHS standards. If there is uncertainty whether this accessory meets specific requirements or if additional technical data is needed, METAV Werkzeuge provides expert Beratung and support — contact METAV Werkzeuge by eMail: info@metav-werkzeuge.

RK-10-PX2 XY Positioning Arm by Dino-Lite The RK-10-PX2 XY Positioning Arm is a compact adjustment tool designed for precise micro-positioning in inspection and laboratory setups, compatible with 10 mm rods and Dino-Lite stands. Precise Travel Range 2.3 x 2.5 cm Compatible with RK-10 and RK-06 stands Manufactured in Taiwan, RoHS compliant 2 Year Warranty included Reliable Precision for Inspection Tasks. The compact design of this Positioning Arm provides controlled, repeatable movement for delicate alignment tasks. With a Travel Range of 2.3 x 2.5 cm, fine adjustments can be made without disturbing the sample or the imaging setup. This level of Precision reduces rework and speeds up inspection workflows by enabling exact positioning for measurement or photography. Engineers and technicians benefit from stable micro-movements that support consistent results in quality control or microscopy-assisted inspection. Design and Compatibility that Simplify Integration. A robust construction and straightforward clamp interface make integration into existing rigs effortless. The arm is compatible with RK-10A, RK-10FS, RK-06A, RK-06FA and selected MS36A stands, and it fits any setup using a 10 mm rod. This compatibility means fewer adapters and a faster setup process. The mount flexibility supports a variety of inspection configurations and ensures that the Positioning Arm works seamlessly with Dino-Lite microscopes and standard laboratory stands. Intended Users and Practical Benefits. This positioning solution is aimed at technicians, laboratory personnel and inspection teams who require reliable micro-adjustment without complexity. The arm’s compact footprint suits benchtop environments and mobile inspection kits alike. Users gain improved handling when aligning cameras or sensors, and the predictable adjustment range helps standardise measurement routines. The result is higher throughput and greater confidence in repeat measurements during production checks or educational demonstrations. Quick Setup, Low Maintenance Operation. Installation and daily use are deliberately user-friendly to minimise downtime. The mechanism requires minimal maintenance while delivering smooth travel and tactile feedback for each axis. Because the unit is RoHS compliant and manufactured in Taiwan, buyers receive a component that meets regulatory expectations and production-quality standards. The included two year warranty provides additional assurance for prolonged operational use. Strongly recommended: Opt for the Dino-Lite RK-10-PX2 XY Positioning Arm for dependable micro-positioning, and contact METAV Werkzeuge for personalised technical advice and ordering support at info@metav-werkzeuge.de, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271. Outstanding Product Features Compact Travel Range for Exact Alignment. The defined Travel Range of 2.3 x 2.5 cm enables micro-adjustments without overshoot and supports high-resolution imaging tasks. This controlled movement is particularly useful when aligning sensors or small components under magnification, allowing users to position targets with confidence and maintain focus during inspection cycles. Universal Mounting for Flexible Use. Compatibility with RK-10A, RK-10FS, RK-06A, RK-06FA, MS36A-A2 and MS36A-C2 ensures the arm integrates into a broad range of rigs. The ability to mount on any 10 mm rod simplifies equipment configuration and reduces the need for bespoke fixtures, saving time during setup and reconfiguration. Robust Build and Compliance for Long-Term Use. Manufactured to meet RoHS standards and produced in Taiwan, the arm combines dependable materials with regulatory compliance. The construction offers durability for frequent handling in lab and workshop environments while minimising the risk of contamination from restricted substances. Technical Information Product Name: RK-10-PX2 XY Positioning Arm. Travel Range: 2.3 x 2.5 cm. Compatibility: Compatible with RK-10A, RK-10FS, RK-06A, RK-06FA, MS36A-A2 and MS36A-C2; designed to work with setups using a 10 mm rod. Package Includes: Positioning Arm. Warranty Period: 2 year. Manufactured in: Taiwan. Regulatory Approval: RoHS. Weight: 0.15 kg. Availability: In Stock. Condition: New. Tariff Code: 90118000. Manufacturer: Dino-Lite. AnMo Electronics Corporation; 17F-1, No. 97, Sec. 4, Chongxin Road, Sanchong Dist., New Taipei City 241513, Taiwan; Tel:+886-2-29749126; E-Mail:Sales@anmo.com.tw. FAQ What is the travel range of the RK-10-PX2 XY Positioning Arm by Dino-Lite and how precise is it? The RK-10-PX2 XY Positioning Arm by Dino-Lite offers a Travel Range of 2.3 x 2.5 cm, providing fine, controllable movements suitable for precise alignment tasks in inspection and measurement routines. Can the RK-10-PX2 XY Positioning Arm by Dino-Lite be mounted on my existing stand? The RK-10-PX2 XY Positioning Arm by Dino-Lite is compatible with RK-10A, RK-10FS, RK-06A, RK-06FA and selected MS36A stands, and it works with any setup using a 10 mm rod, which simplifies integration into existing systems. What warranty and support are provided for the RK-10-PX2 XY Positioning Arm by Dino-Lite? The RK-10-PX2 XY Positioning Arm by Dino-Lite comes with a two year warranty, and METAV Werkzeuge offers expert consultation and assistance for setup and technical questions via info@metav-werkzeuge.de, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271. Is the RK-10-PX2 XY Positioning Arm suitable for use with Dino-Lite microscopes? Yes, the RK-10-PX2 XY Positioning Arm by Dino-Lite is designed to work alongside Dino-Lite microscopes and compatible stands, enabling accurate positioning for imaging and measurement applications. Are you unsure whether this tool meets your exact requirements or need additional technical data? METAV Werkzeuge provides comprehensive and competent advice for complex or specialised tools and is available to support selection and integration. Contact METAV Werkzeuge by e-mail at info@metav-werkzeuge.de, by phone at +49 2822 7131930, or via WhatsApp at +49 170 2837271.

Dino-Lite RK-10EX Verlängerung für RK-10 und RK-06 Stativ Eine optionale Verlängerung für das RK-10 und RK-06 Stativ - Material: Aluminium - Gewicht: ca. 75g - Größe: Armlänge => ca. 15cm Lieferung ohne Dino-Lite Mikroskop

Dino-Lite RK-10FX Schwanenhals für RK-10 und RK-06 Stativ Eine optionale Erweiterung für das RK-10 und RK-06 Stativ um die Flexibilität zu erhöhen. - Material: Schwanenhals => Stahl mit Beschichtung - Drehkopf => Aluminium - Gewicht: ca. 185g - Größe: Armlänge => ca. 29cm / 1,3cm Durchmesser Lieferung ohne Dino-Lite Mikroskop

Dino-Lite RK-10VX Z-Verlängerung für RK-10 und RK-06 Stativ Eine optionale Z-Verlängerung für das RK-10 und RK-06 Stativ - Material: Aluminium - Gewicht: ca. 109g - Größe: Armlänge => ca. 15cm Lieferung ohne Dino-Lite Mikroskop