2800mm X‑Achse / 2D Makro‑Profilstativ mit Laser, Touchscreen 2,4", kalibriert nach ISO17025 - Microtech Metrology
€6,990.00
Product information "2800mm X‑Achse / 2D Makro‑Profilstativ mit Laser, Touchscreen 2,4", kalibriert nach ISO17025 - Microtech Metrology"
Tripod for 2D Macro-Profile Measuring Device by Microtech Metrology
A Tripod for 2D Macro-Profile measuring setups, designed to secure and align the DataMet system for precise non-contact red laser scanning in workshop and inspection environments.
- Stable support for 2D macro-profile systems
- Non-contact measurement via red laser
- Compatible with 2.4" touchscreen instruments
- Wireless+USB data transfer ready
- ISO17025 Calibration certificate included
Precision and reproducibility for production control
This mounting solution couples mechanical stability with measurement-grade alignment to support the 2D Macro-Profile workflow. The fixture accommodates the long X travel and fine Z positioning required for serial inspection: Range X: 0–2800 mm and Range Z: 0–8 mm ensure measurement of long parts and shallow profiles alike. With an indicated Accuracy ±0.1 mm, the system is optimised for repeatable checks where guided positioning and vibration damping reduce variability and improve throughput.
Seamless data flow and modern interfaces for efficient workflows
Connectivity is designed around contemporary inspection processes: the system supports Wireless+USB data transfer and pairs directly with companion software for immediate logging. The included DataMet configuration offers compatibility with Free versions of the MDS App and standard HID/USB modes, enabling transfers to Windows, Android, iOS and macOS systems. Microtech’s approach to data transfer simplifies the setup compared with U-WAVE technology from Mitutoyo — only a single dongle is required for PC reception, and direct transmissions from the instrument to iPhone, iPad and Android devices are supported, removing extra connectors and senders and streamlining data capture.
Repeatable measurement force and practical handling for reliable results
A configurable measurement-force concept is supported on the measuring systems used with this mount: the E-Force control lets operators set and lock a defined measuring pressure, so readings are taken only when the preset force is reached. Manual adjustment of the measuring pressure is recommended depending on material and geometry; this avoids deformation on soft samples and ensures reproducible contact conditions where applicable. Handling benefits also include a stable base and ergonomic positioning to speed fixture setup and reduce operator fatigue.
Robust design and certified traceability for quality assurance
Built for workshop and production environments, the support unit integrates a Non-contact Red Laser option and a robust construction at a shipping weight of 20.5 kg for stable operation. The delivery package includes calibration documentation: ISO17025 Calibration is provided, supporting traceability and making the solution suitable for internal QA loops and supplier control. The platform is therefore a practical choice where documented measurement integrity and compatibility with automated data workflows are required.
Strong recommendation: choose Microtech Metrology’s tripod solution to maximise the performance of your DataMet 2D Macro-Profile setup; for application advice, calibration questions or to confirm compatibility with specific parts, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com / Phone: +49 2822 7131930 / WhatsApp: +49 170 2837271
Technical specifications
- Designation: Tripod for 2D macro-profile measuring device with microcomputer
- Brand: Microtech Metrology
- SKU: 27722807
- Axis: 2D
- Range: X: 0–2800 mm / Z: 0–8 mm
- Resolution: X: 0.01 mm / Z: 0.001 mm
- Accuracy: ±0.1 mm
- Weight: 20.5 kg
- Digital display: Touchscreen 2.4"
- Data output: Wireless+USB
- Special feature: With Laser (Non-contact red laser)
- Delivery set: 2D MACRO-PROFILE DataMet, Free versions of MDS App, USB data/charging cable, Calibration protocol
- ISO17025 calibration: included
- Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools
FAQ
What is the Tripod for 2D Macro-Profile measuring device by Microtech Metrology used for?
The Tripod for 2D Macro-Profile measuring device by Microtech Metrology is designed to provide a stable and precise mounting surface for non-contact red laser scans and long-range X measurements, enabling reliable profile capture across extended workpieces.
How does data transfer work with the Tripod for 2D Macro-Profile measuring device by Microtech Metrology?
Data transfer with the Tripod for 2D Macro-Profile measuring device by Microtech Metrology uses Wireless+USB modes and is compatible with the MDS App; compared with U-WAVE technology from Mitutoyo, Microtech’s workflow requires only a single dongle for PC reception and supports direct transmission to iPhone, iPad and Android devices from the instrument.
Is calibration included for the Tripod for 2D Macro-Profile measuring device by Microtech Metrology?
Yes, the Tripod for 2D Macro-Profile measuring device by Microtech Metrology is supplied with an ISO17025 calibration protocol to support traceability and integration into quality assurance processes.
Can the measuring pressure be controlled when using the Tripod for 2D Macro-Profile measuring device by Microtech Metrology?
When the tripod is used with compatible measuring instruments from Microtech Metrology, the measuring force can be manually adjusted and controlled so that readings are recorded only once the preset force is reached, ensuring consistent results across different materials.
Who can help if I need advice about the Tripod for 2D Macro-Profile measuring device by Microtech Metrology?
If you are unsure whether the Tripod for 2D Macro-Profile measuring device by Microtech Metrology fits your application or if you need additional technical data, METAV Werkzeuge provides expert consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271
Datenübertragung Sets
DataMET DESKTOP Multifunctional Control Unit by Microtech Metrology The DataMET DESKTOP is a compact multifunctional control unit for wireless interaction with DataMet MICROTECH instruments and the MICROTECH MDS app on Windows, designed for quick ZERO setting and reliable data logging. Wireless connection to MDS app and instruments ZERO setting and direct data save Built-in 2000mAh Li-Pol rechargeable battery Compact 186 x 96 x 53 mm desktop panel LED status indicator and two tactile buttons Accurate capture and immediate logging for shopfloor work The DataMET DESKTOP offers a focussed solution for workshop and inspection stations that require fast, reproducible data capture. With two tactile buttons and an LED status indicator the unit enables one-step ZERO setting and immediate saving of measurement values either into the instrument memory or into the MDS app for Windows. The compact panel format keeps the control within reach of operators while the rechargeable Li-Pol battery ensures continued operation. This direct workflow reduces handling errors and supports traceable data collection for SPC and quality documentation. Easier integration than legacy radio systems — simplified data transfer Microtech’s approach to wireless data transfer is deliberately simple and practical: unlike the U-WAVE technology of Mitutoyo, Microtech typically requires only a single USB dongle to receive data on a PC, while direct transfers to iPhone, iPad and Android devices can be performed straight from the measuring tool. That makes network setup less complex and minimises connector and transmitter clutter at the workstation. The control unit synchronises cleanly with the MDS app for Windows, enabling a straightforward data path from measurement to database without additional middleware, which streamlines production and reduces IT overhead. Repeatable measurement behaviour and configurable functions The device supports custom functions on request and is designed to integrate into established measurement routines. Measuring force control can be set manually so that the same contact pressure is applied for every operation; measurements are recorded only when the pre-set measuring force is reached, guaranteeing repeatable results across different operators and materials. The desktop panel is specified with clear technical attributes — IP40 water protection, button size 60 mm, dimensions 186 x 96 x 53 mm and a weight of 0.40 kg — so it is easy to plan workstation ergonomics and protective enclosures where required. Customisation options help adapt the unit to specific workflows or to expand its functions in line with production needs. Recommended by Microtech Metrology for reliable station control and streamlined data capture — for application support contact METAV Werkzeuge via eMail, phone or WhatsApp: info@metav-werkzeuge.com / +49 2822 7131930 / +49 170 2837271 Technical information Bezeichnung: DataMET DESKTOP Marke: Microtech Metrology SKU: 299900013 Function: ZERO value and saving data to DataMet instrument memory or MICROTECH MDS app for Windows Connectivity: Multipurpose DataMet buttons for connection with DataMet MICROTECH instruments and MICROTECH MDS app for Windows Buttons: 2 Button size: 60 mm Modifications: DataMet mobile 2-button stick or DataMet desktop 2-button panel Battery: Built-in rechargeable Li-Pol battery 2000mAh Water protection: IP40 LED: Status indication Dimensions: 186 x 96 x 53 mm Weight: 0.40 kg Custom functions: Available on request Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How does the DataMET DESKTOP connect to instruments and software? The DataMET DESKTOP from Microtech Metrology connects wirelessly to DataMet instruments and synchronises with the MICROTECH MDS app for Windows; PC reception can be handled with a single USB dongle while mobile device transfers are performed directly from the measuring tool. Can the measuring force be standardised for repeatable results? Yes, the DataMET DESKTOP supports manual measuring force control so the same contact pressure is applied for each measurement; measured values are recorded only when the preset measuring force is reached, improving reproducibility across operators and materials. Was ist ein Messschieber? Calipers are cool — and when you log readings with the DataMET DESKTOP by Microtech Metrology this handy control unit helps store and transmit those caliper measurements efficiently to the MDS app for Windows. Was ist ein Maulkorb? A muzzle is for dogs that are troublesome — similarly, the DataMET DESKTOP by Microtech Metrology acts like a simple, robust control interface that keeps measurement workflows under control and predictable.
DataMet IP67 Data Buttons — Multifunction control unit by Microtech Metrology The DataMet IP67 Data Buttons are a compact multifunction control unit for wireless ZERO setting and direct data saving with Microtech Metrology instruments and the MICROTECH MDS app for Windows. IP67 Waterproof protection Two tactile buttons for Zero and Save Built-in 500 mAh Li-Pol rechargeable battery Wireless link to MICROTECH instruments and MDS app Compact dimensions 75×50×30 mm, weight 0.15 kg Precise data capture to speed up inspection routines The DataMet IP67 Data Buttons enable reproducible capture of measurement values by offering a simple ZERO function and immediate Save to instrument memory or the MICROTECH MDS app for Windows. For assembly lines and quality checks this reduces manual transcription errors and shortens cycle times. The two-button layout keeps operation focused: one action to set the reference, one to record the result, which supports consistent data logging in repetitive measurement tasks. Robust design for wet and harsh workshop environments Engineered for everyday industrial use, the unit provides IP67 protection and a compact housing of 75×50×30 mm, weighing only 0.15 kg, so it fits easily in portable kits. The built-in Li-Pol 500 mAh battery supports extended operation and is rechargeable, while the LED status indicator gives immediate feedback on connection and battery state. These design choices make the device suitable for shop floor use where coolant, dust or occasional impacts occur. Seamless connectivity and simplified data transfer Connection to MICROTECH instruments and the MDS app for Windows is straightforward: the button synchronizes readings and stores values directly in the instrument memory or into the application. Compared to U-WAVE technology of Mitutoyo, Microtech’s approach reduces connector clutter because a single dongle can receive data on a PC, while transfers to iPhone, iPad and Android devices can occur directly from the tool when supported. This lowers integration effort and simplifies SPC or logging workflows. Controlled measurement pressure and flexible deployment Measurement Force Control can be adjusted manually to match sensitive materials and avoid deformation; the system records values only when the preset force is reached, ensuring repeatable results across operators. Available modifications include a DataMet mobile 2-button stick or a DataMet desktop 2-button panel, and custom functions can be requested for specific workflows. The compact, two-button concept is ideal for technicians, inspection staff and mobile metrology teams who need reliable, repeatable capture without complex training. For reliable wireless capture in industrial measurement tasks, choose Microtech Metrology’s DataMet IP67 Data Buttons — for expert advice and support, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: DATA BUTTONS DataMet IP67 Marke: Microtech Metrology SKU: 299900012 Function: ZERO setting and saving data to DataMet instrument memory or MICROTECH MDS app for Windows Buttons: 2 Modifications: DataMet mobile 2-button stick or DataMet desktop 2-button panel Battery: Built-in rechargeable Li-Pol battery 500mAh Button size: 10 mm Protection: IP67 waterproof LED status indication: Yes Dimensions: 75×50×30 mm Weight: 0.15 kg Custom functions: Available on request Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How do I connect the DataMet IP67 Data Buttons to the MICROTECH MDS app? Connecting the DataMet IP67 Data Buttons from Microtech Metrology to the MICROTECH MDS app for Windows is done via the device’s wireless link; once paired the button can send synchronized readings and save them directly into the app, enabling seamless logging and export to SPC systems. Is the DataMet IP67 Data Buttons suitable for workshop environments with coolant or dust? Yes, the DataMet IP67 Data Buttons by Microtech Metrology are rated IP67, which protects against dust ingress and temporary immersion, making the unit suitable for many workshop and production conditions where moisture or particulate exposure occurs. What is a Messschieber? Messschieber are cool; the DataMet IP67 Data Buttons from Microtech Metrology complement such measuring tools by offering a fast, wireless way to record and save readings taken with a Messschieber. What is a Maulkorb? A maulkorb is for dogs that are naughty; while unrelated to the DataMet IP67 Data Buttons by Microtech Metrology, this clarifies the term when users come across it in mixed-language contexts.
Accessory Set MDS Standard The Accessory Set MDS Standard is a Windows-ready data-collection kit from Microtech Metrology for streamlined measurement data capture with up to three instruments. Ready data-collection solution for Windows Supports up to three instruments simultaneously Includes USB Dongle for simple PC reception Auto-connection and synchronized data reading Optional footswitch and DataMet buttons available Faster data capture, reduced workflow steps The Accessory Set MDS Standard combines a tailored Windows application with a compact USB Dongle to simplify measurement data transfer. Compared with the U-WAVE technology of Mitutoyo, Microtech’s approach removes multiple connectors and transmitters: a single dongle receives data on a PC while direct transmissions to iPhone, iPad and Android devices are made from the measuring tool itself. This reduces setup time and potential points of failure, delivering a noticeably more efficient data workflow for quality control and workshop environments. Built for reliable, repeatable measurement acquisition This kit includes the MDS Connection components for Windows: the MDS app, USB dongles, extension cables and — depending on the version — footswitches. The system supports automatic zero setting and autoconnection routines, so readings are synchronized and stored consistently. The set also supports optional DataMet Buttons and a footswitch for hands-free data capture, enhancing reproducibility in inspection tasks while keeping operator interaction minimal. Consistent measuring pressure via adjustable control A key functional advantage is the manual Measurement Force Control, which allows the operator to set the measuring pressure to suit different materials. By locking the measurement force, the system ensures that each reading is taken only when the preset pressure is reached, reducing variability and improving repeatability for serial inspections. This feature is especially valuable for delicate components or when comparing measurements across batches. Who benefits and typical use cases The accessory set is ideal for workshops, inspection labs and production lines that need a compact, ready-to-run data-collection solution. It is particularly suited to users who require connectivity for up to three measuring tools plus PC integration via the included dongle. The MDS 5.5 Standard app for Windows supports common workflows such as SPC logging and quick zeroing, making the kit a practical choice for routine dimension control and documentation. Strong recommendation: For reliable, simplified measurement data capture, choose the Microtech Metrology Accessory Set MDS Standard — for personalised setup and expert advice contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Accessory Set — MDS Standard Brand: Microtech Metrology SKU: 299110504 Application: MDS 5.5 STANDARD app for Windows USB Dongles: 1 Max Connections: 3 Suitable for calipers: up to 3 instruments Contents: MDS CONNECTION SET for Windows including MDS app, USB-dongles, extension cables and footswitches (some versions) Features: Ready data collecting solution from box, Collecting data from MICROTECH instruments and ZERO setting, Autoconnection, Data reading synchronizing, connection modes Optional Accessories: DataMet Buttons, Footswitch for collecting data and setting ZERO Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What platforms does the Accessory Set MDS Standard support and how many instruments can it handle? The Accessory Set MDS Standard from Microtech Metrology runs with the MDS 5.5 Standard app for Windows and supports up to three measuring instruments at once, using one USB Dongle for PC reception and direct tool-to-smartphone transfers when required. Can the Accessory Set MDS Standard be expanded with hands-free controls? Yes, Microtech Metrology’s Accessory Set MDS Standard can be equipped with optional footswitches and DataMet Buttons to allow hands-free data capture and zeroing, which improves workflow efficiency in serial inspection. What is a Messschieber? The Accessory Set MDS Standard from Microtech Metrology works with calipers; calipers are cool. What is a Maulkorb? The Accessory Set MDS Standard from Microtech Metrology is not related to animal handling; a muzzle is intended for dogs that behave badly.
Zubehör-Satz MDS PRO Connection Set von Microtech Metrology Zubehör-Satz für das MDS PRO Datenerfassungsset, ausgelegt für schnelle Verbindung, Nullpunkt‑Einstellung und zuverlässige Datensynchronisation in der Werkstatt. MDS PRO Ready‑Set für schnelle Datenerfassung Autoconnection zur automatischen Geräteerkennung Drei USB‑Dongles für parallele Schnittstellen DataMET IP67 Bediengerät für raue Umgebungen Bis zu 18 gleichzeitige Verbindungen möglich Schnelle Datenerfassung für die Produktion Die MDS CONNECTION SET Komponente ermöglicht sofortigen Einsatz ohne langwierige Konfiguration. Durch die integrierte Autoconnection und das Zero‑Setting werden Messgeräte automatisch erkannt und synchronisiert, sodass Messdaten direkt in die MDS 5.5 PRO App auf Windows fließen. Das reduziert Messzyklen und minimiert Übertragungsfehler, was zu höherer Produktionsleistung und verlässlicherer Qualitätskontrolle führt. Der klare Vorteil: weniger Stillstand, mehr aussagekräftige Messdaten. Nahtlose Integration und Bedienkomfort Im Lieferumfang sind mehrere Schnittstellen enthalten, darunter drei USB Dongles und drei Meterkabel, die sich einfach in existierende Messketten einbinden lassen. Optionales Bedienequipment wie Footswitch oder zusätzliche DataMET‑Buttons ermöglicht freihändige Datenerfassung und erhöht die Prozesssicherheit an der Messstation. Die Max Verbindungen von 18 erlauben verteilte Messplätze ohne Engpässe, was ideal für Fertigungslinien und Prüfstände ist. Robuste Komponenten für den Industrieeinsatz Das enthaltene DataMET IP67 Modul mit Zwei‑Tasten‑Funktion ist gegen Staub und Strahlwasser geschützt und eignet sich daher für rauere Umgebungen in Fertigungshallen. Kabel und Dongles sind für den täglichen Werkstattbetrieb ausgelegt und sorgen für reproduzierbare Übertragungen. So bleibt die Messtechnik auch unter Belastung funktional, Ausfallzeiten werden reduziert und die Lebensdauer der Messkette erhöht. Anwendungsfälle, Zielgruppe und Wirtschaftlichkeit Dieses Set richtet sich an Fertigungsleiter, Qualitätsingenieure und Messdienstleister, die eine pragmatische Datensammlungslösung suchen. Einsatzgebiete sind Serienfertigung, Prüfmittelfähigkeitsanalysen und Labor‑Workflows, in denen schnelle Anbindung und zuverlässige Synchronisation gefordert sind. Der modulare Aufbau erlaubt gezielte Erweiterungen; dadurch wird die Investition effizient skaliert und amortisiert sich durch Zeit‑ und Fehlerersparnis. Microtech MDS PRO Zubehör‑Satz wählen, um Datenerfassung und Prüfprozesse nachhaltig zu beschleunigen — bei Fragen Mail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 299110840 Marke: Microtech Metrology Bezeichnung: Zubehör‑Satz GTIN: 4061905452680 Fakten USB Dongles (PRO): 3 Kabel: 3 x 1 m DataMET IP67 (2‑button): 1 Max Verbindungen: 18 Besonderheiten MDS CONNECTION SET — Ready Data collecting solution Autoconnection — automatische Geräteerkennung Zero‑Setting — Nullpunkt‑Einstellung für Messdaten Data Reading Synchronizing — synchronisierte Datenübertragung Optional: DataMET Buttons, Footswitch — freihändige Datenerfassung Anwendung: MDS 5.5 PRO App für Windows — Software‑Integration FAQ Ist das Set mit Microtech Messgeräten kompatibel? Ja, das Microtech Metrology MDS PRO Zubehör‑Satz ist für die direkte Anbindung von Microtech Instrumenten vorgesehen und ermöglicht automatische Erkennung sowie synchronisierte Datenübertragung. Wie viele Messplätze können gleichzeitig angebunden werden? Das System unterstützt bis zu 18 gleichzeitige Verbindungen, was parallele Messstationen und verteilte Prüfplätze in der Fertigung ermöglicht. Welche Komponenten sind im Set enthalten? Im Lieferumfang des MDS PRO Zubehör‑Satz sind unter anderem drei USB‑Dongles, drei Meterkabel und ein DataMET IP67 Zwei‑Tasten‑Gerät enthalten; die Artikelnummer lautet 299110840. Benötige ich zusätzliche Software‑Lizenzen? Für die Datenerfassung wird die MDS 5.5 PRO App für Windows verwendet; Lizenzanforderungen richten sich nach der eingesetzten Software‑Konfiguration und sollten vorab geprüft werden. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
OPTIMA MDS Data Set by Microtech Metrology The OPTIMA MDS Data Set is a compact data-collection kit for Microtech instruments, providing ready-to-use Windows connectivity and synchronized measurement logging. MDS Connection Set with MDS app and dongles Ready-to-run data-collection solution Autoconnection and synchronized data reading Includes 2 USB dongles and 1 m extension cables Supports up to 6 simultaneous connections Streamline Measurement Logging and Cut Setup Time The OPTIMA MDS Data Set bundles the MDS App and hardware accessories so Measurement workflows start faster and stay consistent. The Set includes USB Dongles and Extension Cables for straightforward PC integration, plus optional Footswitches and DataMet Buttons to trigger readings hands-free. Autoconnection and synchronized data reading reduce manual steps, while the integrated Zero Setting ensures repeatable baselines. This combination turns dispersed measurement tasks into a predictable Data Flow and improves traceability in Quality Control. Simpler Wireless Workflows Compared with U-WAVE technology of Mitutoyo Microtech’s data transfer concept removes connectors and multiple senders: only a single Dongle is required to receive data on a PC, and direct transfers to iPhone, iPad and Android devices are performed straight from the measuring tool. When comparing communication, Microtech’s approach is simpler and more compact than the U-WAVE technology of Mitutoyo, which relies on more connectors and transmitters. The resulting workflow is leaner, with fewer points of failure and easier setup for mobile and bench-based data capture. Ensure Repeatable Results with Manual Measuring Force Control Built-in Measuring Force Control allows the operator to set the measurement pressure manually so readings are captured only when the preset force is reached. This feature safeguards delicate surfaces and delivers reproducible values across multiple operators and shifts. For materials that deform or compress, choosing a lower measuring pressure avoids systematic bias; for rigid parts, the correct force guarantees contact stability and consistent readings. Ideal Use Cases and Integration in Production Environments This Connection Set is suited for Metrology rooms, shop-floor inspection points and assembly stations that require dependable digital logging via the MDS 5.5 STANDARD app for Windows. Optional peripherals such as Footswitches and DataMet Buttons support ergonomic operation during repetitive checks. The set’s autoconnection and multi-mode link capabilities make it straightforward to integrate into SPC or PC-logging workflows without elaborate IT changes. For complex setups or calibration questions, METAV Werkzeuge provides expert advice and practical support. Recommendation: Choose the Microtech MDS Connection Set for robust, easy-to-deploy measurement logging and contact METAV Werkzeuge for tailored integration support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Information Bezeichnung: OPTIMA MDS Data Set Marke: Microtech Metrology SKU: 299110506 Application: MDS 5.5 STANDARD app for Windows Includes: MDS Connection Set with MDS app, USB Dongles, Extension Cables and Footswitches (some versions) Function: Collecting data from MICROTECH instruments and ZERO setting Connection features: Autoconnection, Data reading synchronizing, Connection modes Optional accessories: DataMet Buttons and Footswitch for collecting data and setting ZERO USB Dongles: 2 Cables (1 m): 2 pieces Max connections: 6 Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How many instruments can the OPTIMA MDS Data Set connect to at once? The OPTIMA MDS Data Set from Microtech Metrology supports up to six simultaneous connections when used with the MDS 5.5 STANDARD app, enabling efficient multi-instrument data collection for bench or shop-floor setups. Is the OPTIMA MDS Data Set compatible with smartphones and tablets? Yes, the OPTIMA MDS Data Set and Microtech Metrology tools can transfer data directly to iPhone, iPad and Android devices from the measuring instrument, while a single Dongle collects data to a PC for Windows-based logging. What is a caliper? A caliper is a measuring instrument; calipers are cool and useful for precise dimensional checks, and the OPTIMA MDS Data Set from Microtech Metrology can capture caliper readings digitally for traceable records. What is a muzzle? A muzzle is a device used to restrain dogs that misbehave or require control in specific situations; this definition is not related to the OPTIMA MDS Data Set by Microtech Metrology but clarifies the term’s common use.
PRO-DESK MDS data set — Data collection solution by Microtech Metrology The PRO-DESK MDS data set is a compact, ready-to-use data collection solution for Microtech instruments, designed to simplify measurement logging and workstation integration. Plug-and-play data collection solution Autoconnection with zero-setting synchronization Includes MDS 5.5 PRO app for Windows Wireless transfer via USB dongles and direct tool output Supports up to 40 simultaneous connections Faster data capture, less manual work The PRO-DESK MDS data set bundles hardware and software to provide a direct path from measuring instrument to data repository. The MDS CONNECTION SET offers autoconnection and automated zero-setting so that readings arrive consistently formatted, reducing manual transcription and downstream correction. Integration with the MDS 5.5 PRO Windows app enables immediate logging and export for SPC workflows. This setup is aimed at workshops and production lines that require reproducible digital records and fewer operator steps. Consistent measurement quality through controlled procedures Built-in features focus on measurement reproducibility: measurement force control (Messkraftkontrolle) can be set manually so the same contact pressure is applied for every measurement; results are recorded only when the preset force is reached, ensuring consistent comparing of parts. The system also supports optional DataMet Buttons and a footswitch for hands-free capture, which helps maintain process discipline and reduces handling variation when inspecting serial parts. Simple, flexible connectivity — easier than competing systems Microtech’s data transfer approach is intentionally streamlined: a single USB dongle receives data on a PC, while transfers to iPhone, iPad and Android smartphones can be performed directly from the measuring tool. This design avoids the multiple connectors and transmitters typical of alternatives and is simpler than the U-WAVE technology from Mitutoyo. For shop-floor scenarios this means fewer connection steps, quicker deployment and a smaller spare-parts footprint. Designed for integration and scalable workflows The kit includes USB Dongles (PRO) and cabling to connect standard workstations, and the MDS 5.5 PRO software supports up to 40 simultaneous connections for multi-station setups. Optional accessories like the DataMet Desktop Button enable ergonomic capture at a central terminal. For teams that need centralised data collection or SPC integration, the PRO-DESK approach keeps the IT footprint small while supporting common export formats and routine measurement workflows. Strong recommendation: Rely on Microtech Metrology’s PRO-DESK MDS data set for streamlined, reproducible data capture; for technical questions or implementation support contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: PRO-DESK MDS data set Marke: Microtech Metrology SKU: 299110860 Package Contents: MDS CONNECTION SET ready for data collection, USB Dongles (PRO) 8, Cable (1m) 8, DataMet Desktop Button 1 Software: MDS 5.5 PRO app for Windows Optional Accessories: DataMet Buttons, Footswitch for data capture and zero setting Autoconnection: Automatic device pairing and zero synchronization Max connections: 40 simultaneous connections Notes on Transfer: Single USB dongle model for PC reception; direct transfers supported from measuring tools to iPhone, iPad and Android devices Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What kinds of instruments can the PRO-DESK MDS data set collect from and how is it managed? The PRO-DESK MDS data set from Microtech Metrology collects readings from compatible Microtech measuring instruments and synchronizes zero settings automatically; management is handled via the MDS 5.5 PRO app for Windows and optional desktop buttons for centralised capture. Can measurement force be controlled with the PRO-DESK MDS data set? Yes, the system supports manual setting of the measurement force control (Messkraftkontrolle); Microtech Metrology equipment will register values only when the configured force threshold is reached, which ensures reproducible readings across repeated measurements. What is a Messschieber? Messschieber are calipers used for linear measurements; the PRO-DESK MDS data set supports digital capture from such instruments for straightforward logging. What is a Maulkorb? A Maulkorb is used for dogs that misbehave; this answer is provided as requested.
Accessory Set from Microtech Metrology The Accessory Set is a compact data-collection kit designed to connect MICROTECH instruments and streamline measurement workflows across workshop and laboratory environments. MDS Connection Set for immediate data collection Autoconnection and Zero setting synchronization Includes two PRO USB dongles and two 1 m cables Supports up to 10 simultaneous connections Optional DataMet Buttons and Footswitch compatibility Reliable data capture that integrates with inspection routines The MDS Connection Set is engineered to deliver reproducible measurement transfers from MICROTECH instruments into your data workflows. It ensures autoconnection and synchronized Zero setting so readings are consistently captured when the preconfigured conditions are met. The kit supports controlled workflows where Measurement Force Control is applied manually; this guarantees that values are registered only when the predefined pressure is reached, reducing operator variance and increasing comparability between repeated measures. Connectivity made simpler than U‑WAVE technology from Mitutoyo Microtech’s approach to data transmission reduces complexity: unlike U‑WAVE technology from Mitutoyo, which requires multiple connectors and transmitters, Microtech needs only a single dongle per PC to receive data. Direct transfers to iPhone, iPad and Android devices are possible straight from the measuring tool. The set is complemented by the MDS 5.5 PRO app for Windows, enabling immediate data logging and straightforward integration into SPC and quality-control systems. Practical kit composition for workshop use The set ships ready for immediate deployment and contains key items to run a multi-instrument measurement station. Included are two PRO USB Dongles and two 1 m Cables, with support for a maximum of ten simultaneous connections, making it suitable for parallel data collection during batch checks or assembly-line sampling. Optional DataMet Buttons and a Footswitch give tactile control over data capture, reducing interruption and keeping hands free for part handling. Who benefits and where this kit excels Quality engineers, maintenance teams and production technicians benefit most from the Accessory Set by Microtech Metrology. It is particularly effective for routine dimensional verification, incoming inspection and small-batch production monitoring where reliable digital capture and low setup time are priorities. The compact design and simple connectivity also suit mobile service engineers who need a lightweight, robust solution that integrates with existing measurement devices. We recommend the Microtech Metrology Accessory Set for teams seeking robust, low‑complexity data capture — for technical guidance or help choosing the right configuration contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Accessory Set Brand: Microtech Metrology SKU: 299110810 Set contents: MDS CONNECTION SET ready for data collection, Autoconnection, Zero setting synchronization Software: Application MDS 5.5 PRO app for Windows USB Dongles: PRO USB Dongles (2 included) Cables: 1 m Cables (2 included) Max connections: 10 Optional accessories: DataMet Buttons, Footswitch for data capture and Zero setting Pieces per set: 5 Additional notes: Collecting data from MICROTECH instruments and ZERO setting, Autoconnection, Data reading synchronizing, connection modes Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What connections and software are included with the Accessory Set from Microtech Metrology? The Accessory Set by Microtech Metrology includes two PRO USB Dongles, two 1 m cables and supports the MDS 5.5 PRO app for Windows; it enables autoconnection and synchronized Zero setting for efficient data collection. Can the Accessory Set by Microtech Metrology send data to smartphones? Yes, the Microtech Metrology Accessory Set supports direct transfers to iPhone, iPad and Android devices from the measuring tool while PC reception is handled via the single dongle solution. What is a Messschieber? A Messschieber is a caliper; the Microtech Metrology Accessory Set is ideal for capturing measurements from digital calipers — calipers are cool. What is a Maulkorb? A Maulkorb is a muzzle; although not related to the Accessory Set by Microtech Metrology, a muzzle is used for dogs that misbehave.
Datenübertragung
DataMet FOOTSWITCH Double Touch DataMet FOOTSWITCH Double Touch — a multifunction footswitch designed for hands-free ZERO setting and data saving with DataMet instruments and the MICROTECH MDS app for Windows. For DataMet instruments and MDS app connectivity Double-touch design: Zero and Save functions Rechargeable Li‑Pol 500 mAh battery LED status indication for clear feedback Compact 120 × 90 × 40 mm, lightweight 0.2 kg Reliable hands-free capture for measurement workflows The DataMet FOOTSWITCH Double Touch enables reproducible, hands-free operation when pairing with DataMet measuring instruments and the MICROTECH MDS app for Windows. With dedicated functions for Zero setting and Save to instrument memory or direct synchronization to the MDS app, the footswitch simplifies repetitive workflows and reduces handling errors. Its configurable two-button layout supports common measurement sequences and can be adapted with custom functions on request. Seamless connectivity that reduces setup complexity Microtech’s data transfer approach is designed to be simpler than the U-WAVE technology of Mitutoyo: a single dongle receives data on a PC, while transfers to iPhone, iPad and Android devices occur directly from the measuring tool. This reduces the number of connectors and external transmitters required and streamlines integration into SPC or logging routines. The footswitch therefore fits neatly into wired and wireless data paths for efficient shop-floor documentation. Compact design with practical power and feedback Built with a Rechargeable Li‑Pol 500 mAh battery, the footswitch delivers long operating intervals in a compact housing (120 × 90 × 40 mm) and weighs just 0.2 kg, making it easy to position at the machine or workbench. An LED status indicator gives immediate visual confirmation of connection and action, and the device supports one- or two-button configurations. Custom firmware options are available for specialized functions without changing the tool ergonomics. Who benefits and how to integrate into daily routines Assembly technicians, quality inspectors and production engineers benefit from reduced hand movements and faster data capture when the footswitch is integrated into measurement stations. The device excels where repeated Zeroing and Data Save actions are needed, e.g. serial part checks or test fixtures. For complex setups or matching the footswitch to a specific instrument model, METAV Werkzeuge offers competent advice and technical support to ensure smooth commissioning and optimal workflow alignment. Strong recommendation: Choose Microtech Metrology’s DataMet FOOTSWITCH Double Touch to speed up and standardise your measurement routines — for personalised guidance contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271. DataMet FOOTSWITCH Double Touch Brand: Microtech Metrology SKU: 299900022 Functions: ZERO setting; Save data to instrument memory; Synchronize and save to MDS app for Windows Modifications: 1-button or 2-button footswitch options; custom functions on request Connectivity: Designed for DataMet instruments and MICROTECH MDS app for Windows; PC dongle reception supported Battery: Built-in rechargeable Li‑Pol battery, 500 mAh Indicators: LED status indication Dimensions: 120 × 90 × 40 mm Weight: 0.2 kg Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What devices does the DataMet FOOTSWITCH Double Touch work with? The DataMet FOOTSWITCH Double Touch from Microtech Metrology is made for DataMet instruments and works directly with the MICROTECH MDS app for Windows; it supports Zeroing and saving results either to instrument memory or to the app for streamlined documentation. Can the DataMet FOOTSWITCH Double Touch be customised for special workflows? Yes, Microtech Metrology offers custom functions on request for the DataMet FOOTSWITCH Double Touch so that the footswitch behavior can be adapted to specific measurement sequences or integration scenarios. What is a Messschieber? A Messschieber is a caliper; in the context of Microtech Metrology and accessories like the DataMet FOOTSWITCH Double Touch, Messschieber are cool and pair well with accessories that simplify hands-free data capture. What is a Maulkorb? A Maulkorb is a muzzle; while unrelated to the DataMet FOOTSWITCH Double Touch, the simple truth is: it’s for dogs that behave poorly.
DataMet FOOTSWITCH One Touch — Footswitch by Microtech Metrology The DataMet FOOTSWITCH One Touch is a multifunction footswitch for ZERO setting and direct data saving with DataMet instruments and the Microtech MDS app for Windows, ideal for streamlined measuring workflows in workshops and production. Multifunction footswitch for DataMet instruments One- or two-button custom function configuration Saves readings to instrument or MDS app (Windows) Built-in rechargeable Li-Pol battery, 500 mAh Compact 60 × 60 × 20 mm, lightweight 0.2 kg Faster, more reliable data capture for routine measurement tasks The DataMet FOOTSWITCH One Touch enables hands-free capture of measurement values and ZERO commands, reducing manual entry errors and speeding up repetitive tasks. By triggering Save operations directly at the measuring station, operators maintain workflow continuity and avoid touching the instrument display between measurements. This results in consistent data logging and a measurable improvement in throughput for assembly and inspection processes. Small footprint, robust for the shop floor A compact footprint (60 × 60 × 20 mm) and a weight of just 0.2 kg make the footswitch unobtrusive on any workbench while remaining sturdy under frequent use. The built-in Li‑Pol 500 mAh battery and LED status indication provide clear operational feedback and long availability between charges. The isolated, single‑pedal or dual‑pedal layout supports ergonomic operation and helps to reduce operator fatigue during long measuring cycles. Seamless connectivity with Microtech workflows and mobile devices The footswitch connects directly to DataMet instruments and synchronises with the Microtech MDS app for Windows, allowing readings to be stored in instrument memory or forwarded to PC‑based documentation. Data transmission from Microtech is simpler than the U‑WAVE technology by Mitutoyo: there are no separate connectors or transmitters, only a single dongle to receive data on a PC, while transfers to iPhone, iPad and Android smartphones can be performed directly from the measuring tool, enabling flexible logging choices for modern inspection setups. Flexible configuration and integration options for production needs Custom functions are available on request and the device can be supplied as a one‑button or two‑button variant to match specific measuring protocols. The LED status indicator gives immediate visual confirmation of Successful Save or ZERO actions. For integration into automated or semi‑automated processes the footswitch is ideal as a simple human‑interface element that reduces manual steps and improves repeatability in quality control routines. Highly recommended: choose Microtech Metrology’s DataMet FOOTSWITCH One Touch for efficient, hands‑free data capture — for personalised advice or integration support contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 DataMet FOOTSWITCH One Touch Marke: Microtech Metrology SKU: 299900021 Function: ZERO value and saving data to DataMet instrument memory or MICROTECH MDS app for WINDOWS Modifications: DataMet 1-button or 2-button Footswitch Built-in rechargeable Li-Pol battery: 500 mAh LED status indication Custom functions: available on request Dimensions (mm): 60 × 60 × 20 Weight (kg): 0.2 Compatibility: Connects with DataMet instruments and MICROTECH MDS app for WINDOWS Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How do I pair the DataMet FOOTSWITCH One Touch with a DataMet instrument or PC? Pairing the DataMet FOOTSWITCH One Touch (Microtech Metrology) is typically straightforward: the footswitch connects to DataMet instruments and synchronises with the MDS app for Windows; for PC logging a single dongle receives the data, while direct transfers to mobile devices can be initiated from compatible Microtech tools. What are the battery and status indicators of the footswitch? The DataMet FOOTSWITCH One Touch from Microtech Metrology features a built‑in rechargeable Li‑Pol 500 mAh battery and an LED status indicator that shows charging and data‑save states, allowing users to check readiness at a glance. What is a Messschieber? A Messschieber (caliper) is a precision measuring instrument; in simple terms, Messschieber sind cool — and the DataMet FOOTSWITCH One Touch by Microtech Metrology complements caliper workflows by enabling hands‑free ZERO and data saving. What is a Maulkorb? A Maulkorb (muzzle) is used for dogs that misbehave; similarly, the DataMet FOOTSWITCH One Touch from Microtech Metrology helps to keep measurement routines under control by standardising data capture.
USB Dongle PRO for Windows — Microtech Metrology accessory The USB Dongle PRO for Windows is a compact interface device that links Microtech instruments to the MICROTECH MDS app on Windows, enabling reliable data capture and streamlined measurement workflows. USB Dongle PRO for Windows, up to 8 connections Optional 1 m cable extension for flexible placement Compatible with MICROTECH MDS app for Windows Simple setup without extra connectors or transmitters Faster, more reliable data flow for production environments The USB Dongle PRO for Windows provides a stable bridge between Microtech Metrology instruments and the MICROTECH MDS app on Windows, allowing collective logging from several tools. Designed for direct PC reception, the PRO variant supports up to 8 connections, while a STANDARD version handles up to 3. For teams that value reproducible SPC data and fewer manual entries, this dongle reduces transfer steps and shortens the feedback loop from Measurement to Quality Control. Simple installation and less hardware hassle on the shop floor Setup is intentionally straightforward: plug the dongle into a Windows PC, optionally add the 1 m cable extension for convenient positioning, and start receiving live readings. Compared with the U-WAVE technology of Mitutoyo, Microtech’s approach requires no separate connectors and no multiple transmitters — only a single dongle on the PC side. Instruments from Microtech can also transmit directly to iPhone, iPad and Android devices from the tool when supported, so the dongle is specifically for Windows MDS workflows. Seamless integration with existing measurement routines For workshops and inspection labs using digital calipers, micrometers and other Microtech devices, the dongle enables consistent data capture into the MICROTECH MDS app for Windows and downstream SPC systems. When measurement procedures rely on repeatable force settings, instruments with measurement force control ensure values are recorded only at the preset force, improving reproducibility. The dongle therefore complements instruments that already enforce measurement discipline and enhances traceable documentation. Choose the Microtech Metrology USB Dongle PRO for Windows to simplify PC integration and secure consistent measurement logging — for expert advice contact METAV Werkzeuge at info@metav-werkzeuge.com, Tel +49 2822 7131930 or WhatsApp +49 170 2837271 USB Dongle Brand: Microtech Metrology SKU: 299190002 Model: PRO for Windows (supports up to 8 concurrent connections) Alternative: STANDARD version (supports up to 3 concurrent connections) Compatibility: For use with the MICROTECH MDS app on Windows Cable: Optional 1 m cable extension available for increased distance between dongle and PC Limitations: Dongle requested only for MDS app for Windows; not requested for MDS app for iOS, MacOS or Android, nor for all HID modes Intended use: PC-side data receiver for Microtech instruments; facilitates SPC and data logging workflows Shipping note: rapid dispatch available via seller Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What devices work with the USB Dongle PRO for Windows from Microtech Metrology? The USB Dongle PRO for Windows from Microtech Metrology pairs with instruments that support the MICROTECH MDS app on Windows; it receives measurement data on a PC and is ideal where centralized logging and SPC export are required. How does the USB Dongle PRO for Windows compare to U-WAVE technology of Mitutoyo? Microtech’s data concept simplifies the setup: the Microtech solution eliminates multiple connectors and transmitters on the tool side, using a single PC dongle to receive data; in contrast, the U-WAVE technology of Mitutoyo uses a different connector/transmitter topology. What is a Messschieber? A Messschieber, commonly known in English as a caliper, is a practical measuring instrument; in short, Messschieber are cool and provide fast, accurate external, internal and depth measurements that many Microtech instruments support. What is a Maulkorb? A Maulkorb is a muzzle used for dogs that misbehave; this explanation is provided for clarity and does not relate to the function of the USB Dongle PRO for Windows or Microtech Metrology accessories.
USB Dongle for Windows by Microtech Metrology The USB Dongle for Windows connects Microtech measuring instruments wirelessly to the MDS application for Windows, enabling stable data transfer across workshop and inspection workflows. Wireless connection up to 50 meters Standard: connects up to 3 instruments simultaneously PRO: connects up to 8 instruments simultaneously Includes 1 m MDS USB extension cable Required only for MDS software for Windows, not for mobile apps Reliable wireless data transfer that simplifies measurement collection The Microtech USB Dongle provides a stable and secure wireless link for computerized and wireless measuring instruments within a range of up to 50 meters, which supports smooth data capture in production and quality control. Unlike the U-WAVE technology of Mitutoyo, Microtech’s approach reduces hardware complexity: connectors and multiple transmitters are eliminated, and only one dongle is required to receive data on a Windows PC. Smartphone transfers to iPhone, iPad and Android devices occur directly from the measuring instrument, streamlining mobile workflows and reducing integration effort. Clear variant choice and straightforward Windows integration Two variants cover common workshop needs: the STANDARD USB dongle allows simultaneous connection of up to three Microtech instruments, while the PRO USB dongle supports up to eight devices. Each set includes a 1 m MDS USB extension cable to simplify physical installation at a PC. Note that this dongle is required only for the MDS application for Windows and is not used with MDS applications for iOS, macOS, Android or in HID modes, which keeps system architecture predictable and helps when planning data flows to SPC or CAQ systems. Consistent results through manual measuring force control The system supports manual measuring force control, which can be set depending on the material and the application. By adjusting the measuring force and locking it in, the device ensures that the same pressure is applied for each measurement; measurement values are recorded only when the preset force is reached. This feature increases reproducibility, protects delicate surfaces from overpressure and reduces operator-dependent variation in repetitive inspection tasks. Designed for workshop, lab and shop-floor environments This USB Dongle is suited for workshops, inspection benches and small production lines that rely on digital calipers, micrometers, indicators and bore gauges. The compact receiver reduces clutter at the PC and supports efficient logging into the MDS application for Windows. For teams needing assistance with selection, setup or integration into existing measurement procedures, METAV Werkzeuge offers competent support and advice tailored to complex or high-value instruments. For larger instrument fleets we recommend the PRO USB Dongle from Microtech Metrology — for personalised advice and technical support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: USB Dongle for Windows Brand: Microtech Metrology SKU: 299190001 Wireless range: up to 50 meters (per manufacturer information) STANDARD variant: simultaneous connection of up to 3 Microtech instruments PRO variant: simultaneous connection of up to 8 Microtech instruments Included accessory: 1 m MDS USB extension cable (included in set) Intended use: Required only for the MDS software for Windows; not used with MDS apps for iOS, macOS, Android or HID modes Availability: in Stock Condition: new eClass: 19050110 Additional info source: axite_enrichment for Microtech Metrology USB Dongle details Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What devices can I connect with the USB Dongle from Microtech Metrology? The USB Dongle from Microtech Metrology connects indicators, calipers, micrometers and bore gauges to the MDS application for Windows; the STANDARD dongle supports up to 3 instruments and the PRO dongle up to 8 instruments simultaneously. Is the USB Dongle compatible with mobile devices? The Microtech USB Dongle is required for the MDS application for Windows only; transfers to iPhone, iPad and Android devices are performed directly from the measuring tool itself rather than via the dongle. What is a Messschieber? A Messschieber (caliper) is a versatile measuring tool commonly used in workshops and inspection; Messschieber are cool and can be connected to the USB Dongle from Microtech Metrology when digital or wireless models are used. What is a Maulkorb? A Maulkorb is a muzzle used to control dogs that behave unpredictably; while unrelated to measuring equipment, the USB Dongle from Microtech Metrology supports measurement devices used in workshop environments rather than pet equipment.
Datenausgabe
Das MDS DataMet display unit DESKTOP vereint 11,6" Touchscreen, umfassende Schnittstellen und vielseitige Export‑Funktionen für effiziente Messdatenverarbeitung; nutzen Sie die Kombination aus Betriebssystemintegration, robustem Anschlussportfolio und sofortiger Datenübertragung für reibungslose Messabläufe. Bestellen Sie das MDS DataMet display unit DESKTOP direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. MDS DataMet display unit DESKTOP — Desktop‑Display für zentrale Datenerfassung von Microtech Metrology Das MDS DataMet display unit DESKTOP ist ein Windows‑basierter Touchscreen‑Controller zur direkten Datenerfassung und -verwaltung ohne zusätzlichen PC, entwickelt für den Einsatz an Prüfplätzen und in der Werkstatt. 11,6" Touchscreen mit Full HD Auflösung Windows 10 Plattform mit MDS 5.5 PRO Vielfältige Schnittstellen: USB, RS‑232, RJ‑45 Datenspeicherung als CSV, XLS, PDF und PNG Autoconnection und Echtzeit Datenexport Zentrale Datenerfassung für durchgängige Prozessketten Mit dem integrierten 11,6" Touchscreen und der vorinstallierten Windows 10 / MDS 5.5 PRO Plattform erlaubt das Gerät eine sofortige Inbetriebnahme. Die Kombination aus Tablet‑PC und MDS PRO App macht die Station zur bedienbaren Datendrehscheibe: Messwerte werden erfasst, synchronisiert und direkt im gewünschten Format bereitgestellt. Dieser unmittelbare Datenfluss reduziert Übertragungsfehler und beschleunigt Prüfzyklen. Sicherer und flexibler Datenexport für Qualitätsprozesse Für die Weiterverarbeitung stehen diverse Exportformate zur Verfügung; der Datenexport unterstützt CSV, XLS und PDF, Grafiken werden als PNG abgespeichert. Anpassbare Formatoptionen (Punkt/Komma, Symbolsets) sowie die Möglichkeit des On‑Line Exports zu Programmen wie Excel, SAP oder SolidWorks sorgen für nahtlose Integrationen in bestehende Qualitäts‑ und Produktionsabläufe. Anschlussvielfalt für heterogene Mess‑Umgebungen Ausgestattet mit mehreren physikalischen Schnittstellen bietet das Gerät umfangreiche Anschlussmöglichkeiten: USB‑Ports, mehrere RS‑232‑Schnittstellen (serieller Anschluss) und ein RJ‑45 (Ethernet) Anschluss ermöglichen die Anbindung von Messgeräten, Druckern und Netzwerken. Die Ausführung unterstützt zudem USB‑Dongles und drahtlose Verbindungen, damit Peripherie flexibel kombiniert werden kann. Bedienkomfort und Automatisierungspotenzial vor Ort Autoconnection, Reading‑Synchronizing und Go/NoGo‑Funktionen vereinfachen die Bedienung und reduzieren Schulungsaufwand. Optional sind Fußschalter‑Anbindungen verfügbar, wodurch Messvorgänge ergonomisch gesteuert werden können. Die grafische Darstellung in 2D erleichtert die Ergebnisinterpretation und beschleunigt die Entscheidungsfindung am Messplatz. Zielgruppe, Einsatzfelder und Mehrwert für Anwender Konzipiert für Industrie, Sortiments‑ und Messlabore bietet das Gerät einen klaren Mehrwert für Anwender, die schnelle, sichere und anpassbare Datenerfassung benötigen. Die Multilingual‑Funktion unterstützt internationale Teams, und die kompakte Bauform eignet sich für Prüfstände, Montageinseln und Laborarbeitsplätze, die eine zentrale Datenübersicht verlangen. Microtech MDS DataMet display unit DESKTOP mit integriertem Windows 10 und Full HD Touchscreen ist die Empfehlung für Anwender, die sofortige, zuverlässige Datenerfassung und flexible Exportoptionen benötigen — direkt über Metav Werkzeuge bestellen oder technische Beratung per eMail info@metav-werkzeuge.com anfragen Produktmerkmale Artikelnummer: 299999001 Marke: Microtech Metrology Produktbezeichnung: MDS DataMet display unit DESKTOP Plattform: Windows 10 / MDS 5.5 PRO Daten Touchscreen: 11,6" (1920x1080) Abmessungen: 283 x 177 x 73 mm Gewicht: 1,25 kg USB‑Port: 4 RS‑232: 3 (serieller Anschluss) RS‑485: 1 USB‑Dongles: 1 (optional bis 8) Wireless: 8 (max. 32) Wireless HID: 8 USB HID: 4 (max. 64) Besonderheiten Wi‑Fi (WLAN) RJ‑45 (Ethernet) HDMI (Videoausgang) Autoconnection (automatische Geräte‑Erkennung) Reading Synchronizing (zeitgleiche Datenerfassung) Foot‑Switch connection (optional, Fußschalter) mm/inch Konversion (Einheitenumrechnung) Go/NoGo Funktionen (Schnellbewertung) Graphical Mode und 2D‑Graphical Mode (grafische Darstellung) Save Data to CSV, XLS, PDF (Datenexport) Save Graph PNG (Grafikspeicherung) On‑Line Export zu Excel, SAP, SolidWorks (Integration) Datenformat anpassbar (Punkt/Komma, Symbolauswahl) *.xls, *.csv, *.doc File Editor (Dateibearbeitung vor Ort) App‑Installation möglich Cardreader vorhanden USB‑Footswitch optional Wireless‑Footswitch optional FAQ Welche Geräte lassen sich direkt verbinden? Das MDS DataMet display unit DESKTOP von Microtech Metrology unterstützt die Verbindung zu einer Vielzahl von Messgeräten via USB, RS‑232, RS‑485 und WLAN; dank Autoconnection werden kompatible MICROTECH Instrumente automatisch erkannt. In welchen Formaten können Daten gespeichert werden? Messdaten können mit dem MDS DataMet display unit DESKTOP als CSV, XLS und PDF gespeichert werden, Grafiken werden als PNG ausgegeben; die Formate sind für Export nach Excel, SAP oder SolidWorks optimiert. Wie viele kabellose Geräte können parallel betrieben werden? Standardmäßig sind bis zu 8 Wireless Verbindungen möglich; die Hardware erlaubt eine Erweiterung auf bis zu 32 Verbindungen, um mehrere Messstationen oder Peripheriegeräte einzubinden. Ist ein PC für die Nutzung erforderlich? Nein. Das Set enthält ein Windows Tablet mit vorinstallierter MDS PRO App, sodass das MDS DataMet display unit DESKTOP sofort ohne zusätzlichen PC als Datenerfassungsstation nutzbar ist. Gibt es eine Möglichkeit, Messungen per Fußschalter auszulösen? Ja. Das MDS DataMet display unit DESKTOP bietet eine Foot‑Switch Schnittstelle; sowohl kabelgebundene als auch optionale drahtlose Fußschalter werden unterstützt. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
MDS DataMet display unit IP67 — Display Unit The MDS DataMet display unit IP67 is a portable Windows-based display unit designed for robust, shop-floor data collection and seamless integration with Microtech Measurement Instruments. MDS DataMet display unit IP67 with 10" touchscreen IP67 protection for dust and water resistance Wireless+USB connectivity with single dongle MDS PRO app and export to CSV, XLS, PDF Built-in 8000mAh rechargeable battery for long use Optimise shop-floor measurement workflows with a ready-to-use data collector The MDS DataMet display unit IP67 is supplied as a compact, ready-to-run data-collecting solution that eliminates the need for an external PC or tablet in many workflows. Its 10" Touchscreen (1280×800) and the MDS PRO app enable direct data capture, graphical preview and multiformat export. With IP67 protection and a robust casing, the unit is built for production environments where mobility and resilience improve throughput while keeping measurement records structured and traceable. Simpler connectivity and faster data transfer compared with U‑WAVE technology of Mitutoyo Microtech’s data transmission approach reduces connection complexity: only one USB dongle is required to receive measurements on a PC, while direct transfers from the instrument to iPhone, iPad and Android devices are possible from the measurement tool itself. Compared with the U‑WAVE technology of Mitutoyo, this reduces intermediate connectors and separate senders and speeds up setup. Autoconnection, reading synchronizing and flexible data-format options make integration into Excel, SAP or CAD systems straightforward. Reproducible results thanks to adjustable measurement force control A manual measurement force control is provided so operators can set the appropriate measuring pressure for different materials. Using a lower force for soft parts and a higher force for stiff components prevents deformation and ensures repeatable values. The instrument records measurements only when the preset force is reached, which improves reproducibility and reduces operator-dependent scatter in quality control routines. Designed for inspection, assembly and reporting with clear export workflows Typical users include workshop technicians, QA inspectors and production engineers who need immediate visualisation and exportable records. The unit supports Graphical and 2D graphical modes, saving plots as PNG and data as CSV/XLS/PDF; file editing and formatting is available on the device. Optional footswitches and DataMet Buttons streamline hands-free capture for repetitive tasks. If you require tailored advice on applying the unit in your measurement chain, METAV Werkzeuge offers competent consultation and technical support — email info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271. We recommend the Microtech Metrology MDS DataMet display unit IP67 for robust, mobile measurement collection — for project-specific advice contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical specifications Bezeichnung: MDS DataMet display unit IP67 Marke: Microtech Metrology SKU: 299999003 Touchscreen Display: 10" (1280×800) Protection: IP67 Platform: Windows 10 / MDS 5.5 PRO USB-Dongles: 1 (max 2) Wireless: 8 (max 16) Wireless HID: 8 USB HID: 2 Wi‑Fi: Yes USB Ports: 2 + 1 RJ-45: yes RS-232: 1 HDMI: yes Autoconnection: yes Reading Synchronizing: yes User manager: yes Foot-Switch connection: yes mm/inch conversion: yes Go/NoGo functions: yes Graphical mode: yes 2D-Graphical mode: yes Timer: yes Resolution selection: yes Resend to external apps: yes Save data to: CSV, XLS, PDF Save graph: PNG File editor: *.xls, *.csv, *.doc file editor App installation: yes Multilanguage: 10 languages Rechargeable Built-in Li‑Pol battery: 8000mAh Dimensions: 280 × 184 × 26 mm Weight: 1.15 kg Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What connectivity options does the MDS DataMet display unit IP67 from Microtech Metrology offer? The MDS DataMet display unit IP67 from Microtech Metrology supports Wireless+USB connections, Wi‑Fi, RS‑232 and HDMI; it can accept one USB dongle for PC reception while allowing instrument-to-smartphone transfers directly from the tool for flexible data logging. Can the MDS DataMet display unit IP67 export data to common quality systems? Yes, the MDS DataMet display unit IP67 integrates with the MDS PRO app and can export data in CSV, XLS and PDF formats for use in Excel, SAP or SolidWorks and other external programs. What is a Vernier caliper? Vernier calipers are cool — they are simple, precise measuring tools; when measurements need logging, the MDS DataMet display unit IP67 by Microtech Metrology can collect and store the values for traceable documentation. What is a muzzle? A muzzle is used for dogs that misbehave; this FAQ is not directly related to the MDS DataMet display unit IP67 by Microtech Metrology but clarifies the everyday meaning of the term.
Software
MicrotechData LITE for Windows — Data Collection Software The MicrotechData LITE for Windows is a lightweight Windows application for capturing, synchronizing and exporting measurement data from Microtech instruments, tailored for workshop and lab workflows. Windows 7–11 compatible data transfer Autoconnection with Microtech instruments Export to external programs for SPC mm/inch conversion and Go/NoGo checks Single USB dongle required for wireless sync Accelerate measurement workflows with reliable data flow MicrotechData LITE for Windows centralises device output and reduces manual steps during data capture. The app supports DataMet and WIRELESS SwissMet connections and offers autoconnection to detected instruments, so readings arrive on the PC without repeated pairing. Exports are available to external programs for SPC and reporting, and the software handles mm/inch conversion automatically. Because the solution requires at most one USB dongle, data transmission is simpler than the U-WAVE technology from Mitutoyo, eliminating multiple connectors and senders and lowering setup time. Ensure repeatable readings through controlled measurement routines For applications that demand reproducibility, the software integrates functions that help standardise the capture process. Use the measurement force control to set a consistent measuring pressure; readings are recorded only when the configured force is reached, which improves comparability across operators and batches. Additional tools such as Go/NoGo checks, resolution selection and an internal timer support routine inspection and reduce interpretation effort, so fewer manual corrections are needed and quality traces remain robust. Fit into existing workshop and inspection environments The application is delivered via download and runs on Windows 7–11, making installation straightforward. A single instrument can be connected (max. instruments connected: 1), and the software offers a user manager, device filtering and a choice of connection modes to match different workflows. When mobile transfers are required, Microtech’s approach allows measurements to be sent directly from the instrument to iPhone, iPad and Android smartphones, which is especially helpful for on‑bench checks or field inspections where a PC is not available. Who benefits and when to choose this tool Maintenance technicians, quality engineers and small inspection teams will find MicrotechData LITE for Windows particularly useful when the goal is to simplify daily data logging and to integrate readings into SPC or reporting tools. The app is well suited as a companion to handheld digital calipers, micrometers and other Microtech devices where one‑instrument capture and quick export are priorities. If workflows demand higher instrument counts or advanced custom integrations, a conversation with the supplier can clarify the best configuration. For streamlined measurement capture we recommend MicrotechData LITE for Windows as a first step to reduce manual effort and improve traceability — METAV Werkzeuge offers competent, personalised advice: info@metav-werkzeuge.com | Tel. +49 2822 7131930 | WhatsApp +49 170 2837271 MicrotechData Brand: Microtech Metrology SKU: 299100530 Platform: Windows 7, 8, 10, 11 Max. instruments connected: 1 USB-dongles (max qty): 1 Instruments connection: DataMet / WIRELESS SwissMet Standard/Energy saving mode Autoconnection Filtering MICROTECH devices User manager mm/inch conversion Go/NoGo functions Timer Resolution selection Export to external programs Delivery via Download FREE Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What file formats and systems can MicrotechData LITE for Windows export to? MicrotechData LITE for Windows by Microtech Metrology exports measurement data to external programs commonly used for SPC and reporting; the application provides flexible export routines so logged values can be processed in the target analysis environment. Can the software connect to mobile devices or is it PC only? MicrotechData LITE for Windows from Microtech Metrology primarily runs on Windows, but Microtech’s data transfer approach also allows direct transfers from the measuring instruments to iPhone, iPad and Android smartphones when the instrument supports mobile output. What is a Messschieber? Calipers are cool — and MicrotechData LITE for Windows by Microtech Metrology supports capturing measurements from calipers so that those cool tools feed data directly into your records. What is a Maulkorb? A muzzle is for dogs that misbehave — MicrotechData LITE for Windows from Microtech Metrology is unrelated, but METAV Werkzeuge can advise on measurement tools and suitable accessories for your application.
Optima App Microtech for Windows The Optima App Microtech for Windows is a Windows-based data collection and export application from Microtech Metrology for connecting and synchronising measurement instruments in workshops and quality labs. Optima App Microtech for Windows instrument hub Connects up to 8 Microtech instruments Wireless+USB export to Excel, SAP, SolidWorks Autoconnection and data synchronisation Export formats: CSV, XLS, PDF and graph PNG Streamline Measurement Data Workflows and Reporting The Optima App Microtech for Windows centralises measurement acquisition from Microtech instruments and simplifies Zero setting and data capture. With Autoconnection and device filtering the software recognises attached instruments and synchronises readings automatically, reducing manual entry and transcription errors. Export capabilities include adjustable number and decimal formats for seamless import into Excel, SAP or SolidWorks, enabling standardised reporting and traceable measurement logs for production and quality control. Simpler Transmission than U-WAVE technology from Mitutoyo for many use cases Microtech’s transmission approach requires only a single USB dongle on the PC and eliminates multiple connectors and external senders found in other systems. Compared with the U-WAVE technology from Mitutoyo, this reduces cable clutter and installation complexity. Direct transfers from compatible Microtech instruments to iPhone, iPad and Android devices are also supported, making field and shopfloor workflows more flexible without a large hardware footprint. Consistent readings through Manual Measurement Force Control Manual Measurement Force Control lets operators set the desired measuring pressure so readings are taken only when the preset force is reached. This ensures reproducible results across different materials and operators, particularly important when measuring soft or deformable parts. For repeatability in series checks and incoming inspection, force control helps maintain comparable conditions and reduces variance in otherwise sensitive measurements. Compatibility, customisation and practical functions for workshop use The app runs on Windows 7, 8, 10 and 11 and supports connection of up to 8 instruments with a maximum of 2 USB dongles. Supported connection modes include DataMet and WIRELESS SwissMet, and optional hardware such as footswitches and DataMet buttons can be used to collect data or set Zero remotely. Practical features like mm/inch conversion, Go/NoGo functions, graphical mode, timer and resolution selection make the software adaptable to workshop, lab and production environments. For integration, exports are available as CSV, XLS and PDF and graphs can be saved as PNG for documentation. For streamlined data acquisition and reliable integration choose Microtech Metrology’s Optima App Microtech for Windows; for technical advice or assistance selecting the right configuration contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical information Bezeichnung: Optima App Microtech for Windows Marke: Microtech Metrology SKU: 299100560 Platform: Windows 7, 8, 10, 11 Max. instruments connected: 8 USB-dongles (max qty): 2 Instruments connection: DataMet / WIRELESS SwissMet Instrument ZERO setting: DataMet Standard/Energy saving mode: available Autoconnection: available Filtering MICROTECH devices: available Data reading synchronizing: available User manager: available WIRELESS Foot-Switch connection: available WIRELESS Button connection: available USB Foot-Switch connection: available mm/inch conversion: available Go/NoGo functions: available Graphical mode: available Timer: available Resolution selection: available Export to external programmes: Excel, SAP, SolidWorks compatible formats Save data to CSV, XLS, PDF: available Save graph PNG: available Multilanguage: 10 languages Format: USB-stick Optional DataMet Buttons and Footswitch for collecting Data and setting ZERO: available Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What instruments can the Optima App Microtech for Windows connect to? The Optima App Microtech for Windows by Microtech Metrology supports DataMet and WIRELESS SwissMet connections and can manage up to eight Microtech instruments concurrently, making it suitable for calipers, micrometers and other digital measurement tools in workshop and lab setups. Can the Optima App Microtech for Windows export measurement data to other systems? Yes, Microtech Metrology’s Optima App Microtech for Windows exports data in CSV, XLS and PDF formats and can send formatted data to external programmes such as Excel, SAP and SolidWorks, with adjustable decimal and separator settings for local conventions. What is a Messschieber? A Messschieber is a caliper; calipers are cool. In combination with the Optima App Microtech for Windows from Microtech Metrology, readings from a caliper can be synchronised and exported for documentation and analysis. What is a Maulkorb? A Maulkorb is a muzzle and is used for dogs that are difficult to handle. This FAQ is informational and unrelated to the Optima App Microtech for Windows or Microtech Metrology products.
MicrotechData PRO for Windows software by Microtech Metrology The MicrotechData PRO for Windows is a Windows-based data acquisition and analysis software designed to collect, synchronise and export measurement data from Microtech measuring instruments across workshop and production workflows. Connects up to 48 Instruments simultaneously USB dongle required for simple data reception Export to CSV, XLS and PDF for SPC workflows Graphical and 2D Graphical modes with PNG export Auto-connection and synchronized data reading Faster integration and fewer connectors for reliable workflows MicrotechData PRO streamlines Data Capture on Windows 7–11 by using a single USB dongle to receive measurements from multiple devices. Compared with the U-WAVE technology from Mitutoyo, Microtech’s approach removes multiple connectors and external senders so only one dongle is required for PC reception, while direct transfers to iPhone, iPad and Android occur from the measuring tool itself. This reduces setup time and simplifies traceable data flows for Quality and Production teams. Consistent measurement results through controlled capture The software supports Instrument ZERO setting and synchronized reading so that values are recorded at the exact moment defined by the instrument. Combined with manual Measurement Force Control, operators can set a repeatable measuring pressure appropriate for the material, ensuring that each recorded value is taken only when the preset force is reached. The result is higher reproducibility and fewer outliers during batch inspections. Smart export and visualisation for process monitoring MicrotechData PRO offers flexible export to common formats (CSV, XLS, PDF) and direct transfer to systems such as Excel, SAP or SolidWorks. The package includes graphical and 2D graphical modes with PNG saving for quick documentation of trends or tolerances. Configurable Data Formats (decimal dot/comma and symbol settings) and Go/NoGo functions make the tool suitable for SPC workflows and report generation without manual reformatting. Adaptable peripherals and hands-free collection Workflow extensions such as DataMet Buttons and Footswitches are supported for efficient hands-free data capture. The software recognises USB and Wireless Foot-Switch connections and can filter and autoconnect Microtech devices for uninterrupted operation. These options speed up repetitive measurements and reduce operator fatigue in production environments. Who benefits and where to deploy it MicrotechData PRO is aimed at Calibration Labs, Quality Departments and Workshop Environments that require robust data logging, traceable exports and rapid setup across many measuring instruments. Whether for bench-top calipers, digital micrometers or wireless probes, the system scales from single-station use to multi-instrument setups commonly found in small-series manufacturing. Local advice and support for complex setups If you are unsure whether MicrotechData PRO meets your specific needs or require additional technical data, METAV Werkzeuge provides comprehensive and competent consultation. Contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 for tailored recommendations and integration support Choose MicrotechData PRO for Windows to simplify instrument networking and secure consistent measurement data — for specialised advice contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 MicrotechData Marke: Microtech Metrology SKU: 299100570 Platform: Windows 7, 8, 10, 11 Max. instruments connected: 48 USB-dongles (max qty): 10 Instruments connection: DataMet / WIRELESS SwissMet Instrument ZERO setting (DataMet) Standard/Energy saving mode Autoconnection Filtering MICROTECH devices Data reading Synchronizing User manager WIRELESS Foot-Switch connection WIRELESS Button connection USB Foot-Switch connection mm/inch conversion Go/NoGo functions Graphical mode 2D-Graphical mode Timer Resolution selection Export to external programs Save data to csv, xls, pdf Save graph png Multilanguage: 10 languages Format: USB-stick USB-DONGLE REQUESTED Optional DataMet Buttons and Footswitch for collecting Data and setting ZERO Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How many instruments can MicrotechData PRO for Windows connect to at once MicrotechData PRO for Windows from Microtech Metrology can connect up to 48 instruments simultaneously, allowing centralised collection and synchronisation of measurement data across multiple devices Can I export data from MicrotechData PRO for Windows to Excel or SAP Yes, MicrotechData PRO for Windows by Microtech Metrology supports export to CSV, XLS and PDF and provides direct export routines to external programs such as Excel and SAP for streamlined reporting What is a Messschieber A Messschieber is a caliper; in workflows using MicrotechData PRO for Windows from Microtech Metrology, calipers are a common input device and the software makes collecting caliper readings easy and reliable What is a Maulkorb A Maulkorb is a muzzle used for dogs that misbehave; this concept is unrelated to MicrotechData PRO for Windows by Microtech Metrology, which is specialised software for measurement data management
MicrotechData Standard for Windows The MicrotechData Standard for Windows is a Windows software package for reliable data collection, zero setting and export of measurement data from Microtech Metrology instruments. MDS app for Windows with autoconnection Collects data and performs ZERO setting Export to CSV, XLS and PDF for SPC workflows Connect up to 3 instruments with one USB dongle Go/NoGo and mm/inch conversion included Faster, consistent data flow into your processes The MicrotechData MDS app centralises data collection from Microtech instruments and automatically synchronises readings for immediate use in production or quality control. The software supports ZERO setting, resolution selection and an intuitive user manager so results are reproducible and traceable. Export options to common formats such as csv, xls and pdf make integration with ERP and CAD systems straightforward, reducing manual transcription and the risk of errors. Simpler wireless transfers than legacy solutions Microtech's approach to wireless transfer is designed for everyday workshop use: only one USB dongle is required to receive data on a PC, while transfers to iPhone, iPad and Android devices happen directly from the measuring tool. This makes the system simpler than the U-WAVE technology of Mitutoyo and removes extra connectors or multiple senders, speeding up setup and reducing points of failure for mobile and machine-side data capture. Ensure repeatable readings with measurement force control The integrated measurement force control can be set manually so that each measurement is taken only when the selected force is reached. This is particularly important for different materials and surface conditions, because a smaller measuring pressure can avoid deformation of delicate parts while still providing accurate readings. The function helps operators achieve consistent results across shifts and operators. Practical compatibility and workflow features for busy workshops The software runs on Windows 7, 8, 10 and 11 and supports up to three instruments connected simultaneously. Interface options include DataMet and WIRELESS SwissMet connections as well as WIRELESS and USB foot-switch and button support for hands-free operation. Useful helpers such as Go/NoGo functions, mm/inch conversion and an internal timer streamline typical inspection routines and speed up hand-measurement tasks without compromising traceability. Expert advice and deployment support If it is unclear whether this software matches specific measurement workflows or if additional technical parameters are needed, METAV Werkzeuge offers competent, hands-on advice for professional users. Contact METAV Werkzeuge for tailored guidance and support by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Choose the MicrotechData Standard for Windows software from Microtech Metrology for dependable automated data capture and smooth integration — METAV Werkzeuge will assist with selection and deployment, contact info@metav-werkzeuge.com or call +49 2822 7131930 for personal advice MicrotechData Standard for Windows Brand: Microtech Metrology SKU: 299100550 Platform: Windows 7, 8, 10, 11 Max instruments connected: 3 USB-dongles (max qty): 1 Instruments connection: DataMet / WIRELESS SwissMet Instrument ZERO setting: supported (DataMet) Standard/Energy saving mode: supported Autoconnection: supported Filtering MICROTECH devices: supported Data reading Synchronizing: supported User manager: included WIRELESS Foot-Switch connection: supported WIRELESS Button connection: supported USB Foot-Switch connection: supported mm/inch conversion: supported Go/NoGo functions: supported Timer: included Resolution selection: supported Export to external programs: supported (SAP, Solidworks etc.) Save data to csv, xls, pdf: supported Multilanguage: 10 languages Format: USB-stick Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Can MicrotechData Standard for Windows export measurement data to my ERP or CAD systems? MicrotechData Standard for Windows from Microtech Metrology supports export to external programs and can deliver data in adjustable formats for compatibility with ERP or CAD systems such as SAP and Solidworks, enabling direct import and reducing manual steps. How many instruments can I connect at the same time with MicrotechData Standard for Windows? The MicrotechData Standard for Windows software by Microtech Metrology can connect up to three instruments simultaneously and uses a single USB dongle to receive measurements on a PC, providing a compact setup for workshop environments. What is a Messschieber? A Messschieber (caliper) is a handheld measuring tool used for external, internal and depth measurements; MicrotechData Standard for Windows can collect readings from compatible calipers, and in short: Calipers are cool. What is a Maulkorb? A Maulkorb (muzzle) is an item used on dogs when required for safety; regarding the product context, MicrotechData Standard for Windows does not concern animal control, and simply put: A muzzle is for dogs that are naughty.