Twist Drill — Type N, 6.1 mm, HSS, Short, 118° Tip, Black, DIN 338 by MetavCUT

The Twist Drill is a short HSS metal drill designed for precision drilling in steel and non-ferrous metals, suitable for Hand Drills and Drilling Machines.

• Short HSS design for high stability
• Conforms to DIN 338 for short cylinder shank drills
• 118° tip for reliable centring and entry
• Suitable for alloyed and unalloyed steel and non-ferrous metals
• Robust black finish for workshop durability

Precision and Stability for Metalworking

The Twist Drill (MetavCUT, Type N) with a 6.1 mm diameter and 118° tip offers increased rigidity thanks to its Short overall length. This reduced overhang minimises bending and runout, which improves hole accuracy when used in Hand Drills or stationary Drilling Machines. For tasks that demand repeatable, concentric holes in metal, the short geometry delivers better guidance and less vibration than longer bits, resulting in cleaner results and longer tool life.

Standardised Short Design for Consistent Results

Manufactured to DIN 338, the Twist Drill (MetavCUT, Type N) follows the classification for short spiral drills with cylinder shank. The standard ensures defined dimensions, tolerances and compatibility with common chucks, making tool changeover straightforward. Because the geometry and length are standardised, repeat production and jig-based operations benefit from predictable performance and easier quality control.

HSS Material and Application Recommendations

Made from HSS (High Speed Steel), this Twist Drill is optimised for standard metalworking tasks. The roll-walzed production process yields a tougher, more elastic flute body that reduces fracture risk, especially for diameters below 6 mm. Recommended materials include alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. When used in harder materials, adapted speeds and cutting fluids extend life; for softer materials the 118° tip aids initial centring and reduces walking.

Target Users and Practical Advantages

Designed for workshops, maintenance technicians and hobbyists who require robust, repeatable drilling in metal, the Twist Drill (MetavCUT, Type N) shines in setups where stability and precision matter. The short execution supports precise manual drilling and machine operations alike. For users unsure about drill selection or compatible machine settings, METAV Werkzeuge offers competent advice to match the drill to the workpiece and machining conditions.

Strong recommendation: For reliable metal drilling choose the MetavCUT Twist Drill Type N with 6.1 mm diameter and 118° tip — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271

Technical Data

• Designation: Twist Drill / Spiralbohrer
• Brand: MetavCUT
• SKU: 40061-FDA
• Diameter: 6.1 mm
• Tip angle: 118°
• Type: Type N
• Material: HSS (High Speed Steel)
• Execution: Short
• Colour: Black
• Spiral length: 57 mm
• Total length: 101 mm
• For use in: Hand Drill / Drilling Machine
• Standard: DIN 338
• Application: Drills for metal
• Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What is the MetavCUT Twist Drill Type N best used for?
The Twist Drill from MetavCUT (Type N) is primarily designed for drilling metal; it is well suited to alloyed and unalloyed steels, cast iron and non‑ferrous metals where a robust, standard short HSS geometry is required.

Can the MetavCUT Twist Drill Type N be used in a hand drill?
Yes, the Twist Drill (MetavCUT, Type N) is suitable for Hand Drills as well as Drilling Machines; its short overall length increases stability and reduces the risk of breakage during manual operation.

For what is a Twist Drill used?
A Twist Drill (MetavCUT, Type N) is mainly applied to the machining of high‑strength workpieces and larger hole diameters; its form is easy to resharpen and it withstands higher loads, which makes it the tool of choice for many metalworking tasks.

Which three drill types are common?
Common drill types include Metal Drill, Wood Drill and Stone/Concrete Drill, and the MetavCUT Twist Drill corresponds to the Metal Drill category.

Why are Twist Drills sharpened at the tip?
Sharpening reduces the cross‑cut at the tip of the Twist Drill (MetavCUT, Type N), lowering friction forces and thus reducing required feed forces while improving centring in the workpiece.

Can a metal Twist Drill be used in wood?
A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but it typically provides poorer guidance and a less clean finish than dedicated Wood Drills; however it is easier to resharpen and has lower self‑feeding tendency.

For which drilling depths is the Twist Drill most used?
A solid hole is commonly executed with a Twist Drill (MetavCUT, Type N). For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool.

Is HSS or HSSE better?
The general assumption that HSSE is always superior to HSS is incorrect; choosing between HSS and HSSE for a MetavCUT Twist Drill (Type N) depends on working conditions and whether the higher acquisition cost of HSSE is justified by the specific application.