Body Drill (Twist Drill) — 3.2 mm, 135°, Double-sided, Bright Finished, HSS‑G

The Body Drill Twist Drill is a precision metalworking tool designed for Drilling Machines and hand drills, delivering clean, repeatable holes in demanding sheet and plate applications.

• Double-sided design for extended usability
• HSS‑G ground geometry for faster, cleaner drilling
• 3.2 mm diameter for precise small-diameter bores
• 135° tip angle optimised for harder materials
• Fully ground shank for excellent concentricity

Faster, cleaner holes with ground HSS geometry

The Body Drill from MetavCUT uses HSS‑G material and a CNC-ground flute geometry to achieve sharp cutting edges and high running accuracy. This results in cleaner holes and reduced burr formation when drilling metals. The 3.2 mm diameter combined with a 135° tip angle shortens penetration time in harder steels and helps maintain hole geometry. For precision operations, the ground manufacturing method produces a consistently high surface finish, which is particularly beneficial when hole quality matters more than raw removal rate.

Double-ended design for practical workshop efficiency

A double-sided or double-ended Twist Drill offers practical advantages: when one tip becomes blunt, the drill can be reversed and the other cutting end used, effectively providing two cutting edges in one tool. The fully ground shaft and HSS‑G construction enable up to 40% faster drilling with approximately 50% less feed force compared with conventional HSS drills under the same conditions. These features make the tool well suited to repetitive tasks in sheet metal, where changing tools frequently interrupts workflow and increases downtime.

Suited materials and recommended machining guidance

The MetavCUT Body Drill is intended primarily for metalworking and performs well in legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and harder plastics. For best results in tougher alloys, use appropriate coolant and moderate cutting speeds; the 135° tip angle assists centring and reduces wandering on hard surfaces. Because the drill is ground rather than rolled, it offers superior concentricity and a precise hole finish, though care should be taken to avoid excessive shock loading to reduce the risk of breakage.

Practical tips, target users and on-site advice

Workshop professionals, sheet-metal fabricators and maintenance technicians benefit most from this compact Twist Drill design: its short overall length and robust double-ended layout make it ideal for tight or repeatable operations. When using handheld Drilling Machines, clamp workpieces securely and use cutting fluid for longer tool life. If uncertain whether the MetavCUT Body Drill meets specific production requirements or for guidance on speeds, feeds and coolant, METAV Werkzeuge offers comprehensive technical advice and application support to assist with selection and setup.

MetavCUT's Body Drill with HSS‑G ground geometry is recommended for precision metal drilling—contact METAV Werkzeuge for expert guidance at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271

• Designation: Body Drill (Twist Drill)
• Brand: MetavCUT
• SKU: 58032-FDA
• Diameter: 3.2 mm
• Tip angle: 135°
• Spiral length: 10 mm
• Total length: 46 mm
• Material: HSS‑G
• Execution: double sided
• Colour: bright finished
• Shank finish: fully ground
• For machine: Drilling Machine
• Model series: Standard Line
• Application: Drills for metal
• Packaging unit: 10
• Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com

FAQ

What materials can the MetavCUT Body Drill (Twist Drill) machine effectively cut?
The MetavCUT Body Drill designed as a Twist Drill is primarily intended for metalworking and is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics; users should apply appropriate cutting fluid for best life and hole quality.

Is the MetavCUT Body Drill suitable for handheld Drilling Machines?
The MetavCUT Body Drill can be used in handheld Drilling Machines, provided the workpiece is securely clamped and feed pressure is controlled; the double-sided design and fully ground shank help maintain concentricity in portable setups.

For what is a Twist Drill used?
A Twist Drill, such as the MetavCUT Body Drill, is mainly used in the machining of high‑strength materials and for larger hole diameters; its form allows easy regrinding and it withstands higher loads, making it common in bodywork and sheet-metal drilling.

Which three drill types are there?
There are three principal drill types: metal drills, wood drills and stone/concrete drills; the MetavCUT Body Drill belongs to the metal drill category and is optimised for metalwork.

Why are Twist Drills sharpened (pointed)?
Sharpening reduces the cross‑cutting edge at the tip of a Twist Drill. By sharpening, frictional forces are significantly lowered, requiring less feed force while improving the drill’s centring in the workpiece.

Can a metal drill be used to drill wood?
A metal drill like the MetavCUT Body Drill can be used in wood, but guidance and finish are inferior compared with purpose‑made wood drills; metal drills allow easier resharpening and show less self‑feeding tendency.

At which drilling depths is the Twist Drill most used?
A full‑bore hole is commonly executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool.

Which is better, HSS or HSSE?
The general belief that HSSE steels are intrinsically superior to HSS is not universally correct; the higher cost of HSSE must be justified by specific working conditions, so evaluate whether your application requires HSSE before choosing over HSS.