HSS-G Twist Drills DIN 338 – Type N, Short, TiN-Coated, 118°

Twist Drill Basic Line — Twist Drill, 8.5 mm, 118° tip, Short, TIN-coated, HSS-G, DIN 338 The Twist Drill Basic Line is a short HSS-G twist drill for Drilling Machine use, optimised for precise metalworking. Short design for increased stability and accuracy TIN-coated surface for reduced wear and longer life Fully ground shank for superior concentricity Conforms to DIN 338 for short cylinder-shank drills Precision and durability for metalworking tasks The Twist Drill Basic Line combines a short design with HSS-G material to deliver greater stability when drilling metal. The reduced overhang lowers the risk of bending, so holes are truer and repeatability improves. This results in more accurate component assembly and fewer rejects in production. The TIN-coated finish diminishes friction and enhances surface hardness, extending tool life under cyclic loads and when used with appropriate cooling. Faster drilling with lower feed forces Thanks to the fully ground geometry and optimised flute design, this short twist drill requires noticeably less axial force during cutting. Users benefit from up to 40% faster penetration in many ferrous materials compared with conventional HSS options, while feed effort is reduced by roughly 50%, making manual drilling on a Drilling Machine easier and more controlled. The 118° tip angle aids centring on semi-soft materials while maintaining good chip evacuation in metalworking. Designed for demanding metal applications Engineered in accordance with DIN 338, this short twist drill is suitable for alloyed and unalloyed steel, cast iron, sintered iron, copper, bronze, and hard plastics. The short spiral length improves stability for hard materials and larger diameters, making it a practical choice for workshop and industrial settings. Use with coolant is recommended to maximise life and maintain cutting performance, particularly when machining tough or heat-sensitive alloys. Who benefits and how to integrate it into workflows Workshops and maintenance departments that prioritise precision and repeatability will appreciate the Basic Line short twist drills. The 8.5 mm diameter and 117 mm overall length (with a 75 mm spiral length) fit many standard setups and can be used in portable Drilling Machines as well as stationary machines. For best results, clamp workpieces securely, apply suitable cutting fluid, and select appropriate spindle speed for the material being drilled. MetavCUT recommends the Twist Drill Basic Line for precise metal drilling; for tailored technical advice or to confirm suitability for specific materials and thicknesses, contact METAV Werkzeuge – comprehensive consulting is available via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Basic Line (short) Brand: MetavCUT SKU: 28085-FDA Diameter: 8.5 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 118° Material: HSS-G (ground High Speed Steel) Shank: Fully ground (geschliffen) Coating/Colour: TIN-coated (Titanium Nitride) Intended machine: Drilling Machine (Handbohrmaschine compatible) Standard: DIN 338 Application: Drills for metal / Bohrer für Metall Execution: Short (kurz) Model series: Basic Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Basic Line best used for and which materials suit it? The Twist Drill Basic Line from MetavCUT is optimised for drilling metal; it performs well in alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Copper, Bronze and Hard Plastics when used on a Drilling Machine and preferably with coolant to reduce wear. Can the MetavCUT Twist Drill Basic Line be used in handheld drills? Yes, the MetavCUT Twist Drill Basic Line can be used in compatible Hand Drilling Machines, but its short design and ground geometry are particularly beneficial in stable setups or where rigidity and precision are required. What are Twist Drills used for? Twist Drills are primarily applied to the machining of high-strength materials and larger drill diameters; their form is easy to resharpen and withstands higher loads, making them suitable for demanding metalworking tasks. Which 3 drill types exist? There are three main drill categories: Metal drills, Wood drills, Stone/Concrete drills.

MetavCUT Twist Drill (Short Twist Drill) — 8 mm, 118°, TIN-coated, Short, DIN 338, HSS-G The MetavCUT Twist Drill is a short Twist Drill designed for precise metalworking with an 8 mm diameter and a 118° point angle for reliable centring in a wide range of metals. MetavCUT Twist Drill short 8 mm TIN-coated for reduced friction and longer life HSS-G fully ground for precise metal drilling 118° Point angle for reliable centring Conforms to DIN 338 for short twist drills Faster, more precise metal drilling with reduced effort The short design delivers higher stability and less deflection compared with longer drills, which translates into cleaner holes and fewer rejects when working with metal. The HSS-G (ground high-speed steel) geometry enables up to 40% faster drilling and requires around 50% less feed force than conventional HSS drills; this reduces operator fatigue and shortens cycle times in production environments. The combination of short overhang and a fully ground flute results in improved runout accuracy, especially when used in a stable drilling set-up such as a drilling machine. Durable coating and optimised geometry for longer tool life A TIN-coated surface significantly lowers friction and helps to reduce wear when machining alloyed and unalloyed steels, cast materials and non-ferrous metals. With appropriate cooling, the Titanium Nitride layer increases service life and keeps cutting edges sharper for longer, so fewer tool changes are needed. The 118° point angle eases centring on slightly curved or coated surfaces and balances entry aggressiveness with edge strength, which is beneficial when drilling materials like aluminium, copper and hard plastics. Engineered for metal: materials and standards explained Conformity to DIN 338 indicates this tool is a short twist drill with a cylindrical shank manufactured from HSS and produced either by grinding or rolling; the MetavCUT version is ground, which provides very sharp cutting edges and high concentricity. Ground drills excel in metalworking because the flute geometry and primary cutting edges are precise, producing accurate hole dimensions and improved surface finish. Note: ground HSS drills can be more brittle than rolled types and perform best with steady clamping and adequate cooling. Practical use cases and operator guidance This Twist Drill is intended primarily for drilling metal on stationary or portable drilling machines and is suitable for machinists, toolrooms and maintenance shops requiring reproducible, high-quality holes. For best results use moderate spindle speeds, apply a suitable coolant for steels and clamp the workpiece securely. The fully ground shank eases chuck gripping and reduces slippage. If uncertain whether this drill meets specific requirements or if additional technical data is needed, METAV Werkzeuge offers expert support and consultation to help select the correct tool and machining parameters. We recommend the MetavCUT short Twist Drill for precision metalworking — for personalised advice contact METAV Werkzeuge by email info@metav-werkzeuge.com or phone +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Specifications Designation: Twist Drill Marke: MetavCUT SKU: 28080-FDA Diameter: 8 mm Point angle: 118° Type / Execution: short Coating / Colour: TIN-coated Spiral length: 75 mm Overall length: 117 mm Shank execution: fully ground Material: HSS-G Standard: DIN 338 Application: Drills for metal For drilling machine: drilling machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is mainly applied to the machining of high-strength materials and larger diameters; its shape is easy to regrind and it withstands significant loads, making it especially suitable for metalworking and demanding applications. Which three drill types exist? Drill types are commonly categorised as metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill category and optimised for that purpose. Is there anything else you need to determine whether this tool suits your process? Are additional dimensions or speed recommendations required? METAV Werkzeuge provides comprehensive and competent advice — feel free to contact us by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271

Twist Drill (Short) – 9.5 mm, 118° tip, TIN-coated, HSS-G, DIN 338 A Twist Drill in short execution for precise metalworking on drilling machines, designed to combine stability and long tool life. Short HSS-G Twist Drill for higher stability TIN-coated for extended tool life Fully ground shank for accurate centring DIN 338 classification for metal machining 118° tip angle for reliable entry Greater Precision through Reduced Overhang and Higher Rigidity The short execution of this Twist Drill provides a significantly reduced overhang, which directly increases Stability and reduces the risk of bending under load. Shorter protrusion from the chuck leads to consistently better roundness and hole accuracy when machining Metal, making the tool particularly suitable for demanding workshop and industrial tasks. This shorter geometry supports precise alignment on rotating and stationary drilling machines without compromising hole quality or surface finish. Longer Service Life and Lower Wear with TIN Coating A TIN-coated surface extends tool life by reducing friction and improving heat resistance during high-speed metal drilling. The HSS-G base material paired with the Titanium Nitride layer ensures that cutting edges remain sharper for longer, especially when combined with an appropriate cooling system. This combination reduces abrasive wear and helps maintain dimensional accuracy in legged and unalloyed steel, cast materials, copper, bronze and hard plastics, resulting in fewer tool changes and more consistent production runs. Faster Cutting and Lower Feed Force for Efficient Production Thanks to the fully ground HSS geometry, this short Twist Drill permits up to 40% faster drilling while requiring approximately 50% less axial feed force compared with conventional HSS drills. The CNC grinding process produces very sharp cutting lips and excellent runout characteristics, which improve chip evacuation and hole quality. For demanding metalworking operations, these characteristics reduce machining time and operator effort while increasing throughput on production lines. Norm Compliance and Recommended Working Conditions Manufactured according to DIN 338 for short spiral drills with cylindrical shanks, this tool meets industry standards for dimensions and tolerances, ensuring compatibility with common chucks and fixtures. The 118° tip angle provides reliable entry and is well suited for a range of metals and general-purpose machining; cooling is recommended to exploit the TIN coating and HSS-G material fully. For best results, use in stationary or well-supported drilling setups and consider coolant when machining tougher alloys to maintain tool life and hole quality. Strong recommendation from MetavCUT: select this short Twist Drill for precision metal machining—METAV Werkzeuge offers expert consultation and technical support via email info@metav-werkzeuge.com, telephone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 28095-FDA Diameter: 9.5 mm Tip Angle: 118° Execution: short Colour: TIN-coated Application: Drills for metal Spiral Length: 81 mm Overall Length: 125 mm Shank Execution: fully ground Material: HSS-G Standard: DIN 338 Compatible Machine: Drilling Machine Model Series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is mainly applied when machining high-strength materials and larger drill diameters; it performs well in alloyed and unalloyed steel, temper-cast parts, cast iron, sintered iron, copper, bronze and hard plastics. Its short design and HSS-G composition favour precise industrial drilling operations and longer tool life under suitable cooling. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal-drill family and is optimised for drilling in metallic and hard synthetic materials.

Twist Drill — Short HSS-G Drill, 9 mm, 118° point, TIN-coated, DIN 338, fully ground, MetavCUT A short Twist Drill designed for precise metal drilling with Drilling Machines Short design for increased stability and precision TIN-coated surface for reduced wear and friction HSS-G fully ground for faster drilling and clean holes 118° point angle for easy centring in softer metals Conforms to DIN 338 for consistent manufacturing quality Durable HSS-G Construction for Longer Tool Life The HSS-G base material combined with a TIN-coated surface delivers extended lifetime when working with metallic materials. This composition reduces surface wear and friction, so heat buildup is minimised during continuous drilling. The coating supports improved tool life particularly under intermittent cooling, while the substrate material retains cutting edge stability for demanding machining tasks. Short Design and Fully Ground Geometry for Precise Results A shorter overall length reduces overhang and increases stability, which directly improves concentricity and reduces vibration during drilling. The fully ground flute geometry creates sharper cutting edges, enabling up to faster penetration with lower feed forces compared to rolled types. The 118° point angle favours centring and controlled entry in softer metals and certain non-ferrous alloys while still offering reliable starts on slightly curved surfaces. Optimised for Metalworking and Professional Use Designed for use with Drilling Machines, this tool excels in machining alloyed and unalloyed steel, Tempered Cast Iron, Gusseisen, Sintered Iron, Copper, Bronze and hard plastics. Workshops and maintenance professionals benefit from consistent hole quality and reduced rework. The tool’s characteristics make it particularly suitable for precision tasks where minimized runout and reproducible hole tolerances matter. DIN 338 Standard and Practical Handling Advice Manufactured to DIN 338, the tool follows industry definitions for short Twist Drills with Cylindrical Shanks. Being ground rather than rolled results in sharper edges and higher runout accuracy, but also a slightly increased susceptibility to fracture under improper handling. Use appropriate coolant for extended tool life and prefer stationary or well-supported setups to exploit the drill’s precision advantages. Strongly recommend MetavCUT’s short TIN-coated HSS-G Twist Drill for demanding metalworking tasks — for expert advice and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 — METAV Werkzeuge offers extensive and competent consultation for technical queries and product selection Bezeichnung: Twist Drill Marke: MetavCUT SKU: 28090-FDA Durchmesser: 9 mm Spitzenwinkel: 118° Gesamtlänge: 125 mm Spirallänge: 81 mm Ausführung: short Schaft Ausführung: fully ground Farbe / Beschichtung: TIN-coated Material: HSS-G Norm: DIN 338 Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Modellserie: Basic Line Hersteller: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its short design and robust geometry make it suitable for demanding metalworking tasks. The tool’s shape allows relatively easy resharpening and it withstands considerable loads while delivering clean, precise holes. Which three drill types exist? The common classification names three main categories: Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for the properties and requirements of metallic materials.