DIN 1869 HSS-G Twist Drills – Extra Long, Bright, 135° Split Point

Twist Drill — Twist Drill 5.5 mm | Extra Long | HSS‑G | 135° | Bright Finished The Twist Drill is an extra long HSS‑G metal drill bit (5.5 mm) designed for deep, precision drilling in hardened and unalloyed steels and other demanding materials. Extra long geometry for deep holes 135° tip angle for harder materials Fully ground shank for high concentricity HSS‑G material for fast cutting in metal Conforms to DIN 1869 for deep‑hole performance Superior Cutting Performance for Tough Metals The HSS‑G construction delivers a combination of hardness and toughness that enables faster chip removal and longer edge life when working with metal. The 135° tip angle reduces walking on hard surfaces and improves entry when drilling stainless steel or tempered materials. This geometry is particularly effective for tasks where a clean, precise hole is required rather than aggressive material removal. Designed for Deep and Hard‑to‑Reach Holes With an extra long overall length and a deep‑spiral flute design, this drill is optimised for extended reach in installations and fixtures. The extended spiral length supports reliable chip evacuation during deep drilling, lowering the risk of clogging; this makes the bit suitable for deep bore operations in components where access is limited or standard lengths are insufficient. Precision Shank and Stable Runout A fully ground shank and CNC‑ground flute geometry ensure high concentricity and precise cutting edges. The ground manufacturing process yields sharper cutting lips and improved dimensional accuracy, producing cleaner holes in metal. For stationary or machine use with adequate cooling, the ground finish provides superior performance over rolled alternatives. Practical Application and Material Range This Twist Drill is engineered primarily for metalworking: legated and unlegated steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The DIN 1869 standard and the HSS‑G specification indicate suitability for drilling into materials up to 1000 N/mm² when operated under appropriate speeds and coolant conditions. For less critical tasks or soft materials, consider standard‑geometry drills for easier guidance. Who Benefits Most from This Tool Workshop professionals, maintenance technicians and machine operators who require dependable performance for deep metal drilling will benefit from the combination of extra length, high cutting speed and precision finish. The bit is suitable for use in a Drilling Machine or robust hand drilling equipment, provided speed and feed are adapted to material and cooling is used for sustained tool life. I strongly recommend the MetavCUT Twist Drill for demanding deep‑hole metalworking applications — for personalised advice or supplementary technical data please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 32055-FDA Diameter: 5.5 mm Overall length: 205 mm Spiral length: 140 mm Tip angle: 135° Material: HSS‑G Finish: Bright finished Execution: Extra long Shank finish: Fully ground Standard: DIN 1869 Suitable for: Drilling Machine (Handbohrmaschine) Model series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill? The MetavCUT Twist Drill (Twist Drill) is primarily used for drilling in metal; its HSS‑G composition and 135° tip angle make it suitable for legated and unlegated steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, offering faster penetration and improved centring in harder materials. Which three drill types exist? Common drill types include Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.

MetavCUT Twist Drill — Extra Long HSS‑G Twist Drill, 5.5 mm, 135° Point, DIN 1869, Bright Finished The MetavCUT Twist Drill is an extra‑long, fully ground HSS‑G drill bit designed for deep metal drilling with a 135° tip angle and bright finished surface for improved chip evacuation. MetavCUT Twist Drill Standard Line Extra‑long design for deep or hard‑to‑reach holes 5.5 mm Diameter with 135° Point Angle HSS‑G, fully ground for precise metal drilling DIN 1869 conformity and bright finished surface Faster deep drilling with less feed force The extra‑long HSS‑G geometry of this Twist Drill reduces required Anpresskraft significantly: the ground HSS design enables up to 40% faster drilling while needing about 50% less feed force than conventional HSS bits. With a Spiral Length of 180 mm and a Total Length of 260 mm the bit reaches deep positions without extensions or special holders. This efficiency translates into shorter cycle times on production jobs and less operator fatigue in workshop tasks. Reliable performance in hard and alloyed metals For demanding materials the combination of HSS‑G and a 135° point angle ensures stable starts and controlled cutting in Grauguss, legierten and unlegierten Stahl, Gusseisen and non‑ferrous metals. The DIN 1869 specification and the reinforced tip geometry make this bit suitable where consistent hole quality is required. When working with tougher steels the flattened tip reduces walking and shortens the Anbohrzeit, so holes are truer and require less rework. Precision by fully ground geometry and bright finish The Twist Drill is fully ground (HSS‑G), meaning the flutes and cutting edges are produced by CNC grinding rather than rolling. That process creates very sharp edges and high Rundlaufgenauigkeit, resulting in clean, precise bores. The bright finished surface improves chip flow and prevents rapid built‑up edge formation. Note: ground bits can be less tolerant to shock loads than rolled types, so use steady feeds and, where appropriate, coolant to extend life. Practical use, maintenance and recommended machines Designed for use in Drilling Machines and hand drills where deep bores are required, the bit performs best with moderate cutting speeds and sufficient lubrication or coolant on hard materials. Regrinding is possible but should respect the original 135° geometry to keep performance. This Twist Drill is aimed at professional workshops, toolrooms and maintenance departments that value accuracy in deep drilling. If uncertain about speeds or feed rates for a specific alloy, METAV Werkzeuge offers competent technical advice. For precision deep‑metal drilling choose the MetavCUT Twist Drill with its extra‑long HSS‑G design — for further technical guidance or application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33055-FDA Diameter: 5.5 mm Point Angle: 135° Execution: extra long Colour / Finish: bright finished Shaft Execution: fully ground Spiral Length: 180 mm Total Length: 260 mm Material: HSS‑G Norm: DIN 1869 Model Series: Standard Line Application: Drills for metal Suitable For: Drilling Machine / Hand Drill Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill is primarily intended for drilling in high‑strength and alloyed metals; it excels when producing deep holes and is especially suited to materials such as cast iron, alloyed and unalloyed steel, sintered iron and hard plastics. Can the MetavCUT Twist Drill be used in a hand drill or only in stationary machines? The MetavCUT Twist Drill can be used in both Drilling Machines and hand drills; for the best hole quality and tool life, a stationary machine with steady feed and coolant is recommended, while portable use should avoid shock loading. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. The form is easy to regrind and withstands higher loads, making it suitable for demanding metalworking operations. Which three drill types exist? The three common drill types are Metal drills, Wood drills and Masonry/Concrete drills. Why are Twist Drills re‑pointed (ausgespitzt)? Re‑pointing reduces the cross‑cut at the tip; by sharpening the tip the Reibkräfte are markedly lowered and less feed force is required, while the drill centers better in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal drills are easier to regrind and show less self‑feeding, so the hole surface may be rougher.

Twist Drill — Twist Drill (Spiralbohrer), Ø 5.5 mm, 135° Point, Bright Finished, Extra Long, HSS‑G, DIN 1869 The Twist Drill is an extra long metalworking Twist Drill designed for deep and precise holes in alloyed and unalloyed Steel, Cast Iron and Hard Plastics when used in a Drilling Machine. Extra long overall length for deep holes CNC ground flutes for high accuracy 135° Point Angle for harder materials HSS‑G Material for sharp, durable cutting edges Bright finished surface for smooth chip evacuation Faster, more powerful drilling in tough materials Dank der HSS‑G Legierung ermöglicht dieser Twist Drill deutlich schnellere Schnitte bei reduziertem Anpressdruck. Entwickelt nach DIN 1869, sorgt der 135° Point Angle für einfacheren Anbohrvorgang in harten Werkstoffen wie Edelstahl oder gehärteten Stählen. Diese Kombination aus Material und Geometrie reduziert Verschleiß und verbessert die Bohrqualität, sodass präzise Bohrlöcher mit sauberem Spanbild erzielt werden können. Reach deep or hard-to-access positions with extra length Die Extra‑Long Ausführung mit einer Overall Length von 330 mm und einer Spiral Length von 225 mm ermöglicht Bohrungen in größeren Tiefen und an schwer zugänglichen Stellen. Der vollständig geschliffene Schaft und die geschliffenen Spannuten garantieren hohe Rundlaufgenauigkeit und saubere Bohrbilder, was speziell bei Metallbearbeitung in Werkzeugbau und Instandhaltung den Unterschied macht. “Fully Ground” bedeutet, dass die Geometrie durch CNC‑Schliff erzeugt wird, was schärfere Kanten und bessere Präzision zur Folge hat. Recommended use and handling for reliable results Für den Einsatz in stationären Drilling Machines oder handgeführten Bohrmaschinen ist eine kontrollierte Kühlung und stabile Werkstückspannung wichtig, da geschliffene HSS‑Bohrer sehr scharf, aber spröder sein können. Anwender sollten den Twist Drill mit moderater Vorschubkraft und geeigneter Kühlschmierstoffzufuhr verwenden, um Bruchrisiken zu minimieren und die Standzeit zu erhöhen. Die Ausführung eignet sich besonders für professionelle Anwender in Werkstätten und Fertigungslinien. Strong recommendation from MetavCUT: For deep metal drilling choose this extra long Twist Drill — METAV Werkzeuge offers expert consultation to ensure the right tool for your task. Contact METAV Werkzeuge for personalised support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Specifications for precise deep metal drilling Designation: Twist Drill Brand: MetavCUT SKU: 34055-FDA Diameter: 5.5 mm Overall Length: 330 mm Spiral Length: 225 mm Point Angle: 135° Material: HSS‑G Execution: Extra Long Shaft Execution: Fully Ground Colour: Bright Finished Type: For Drilling Machine Norm: DIN 1869 Model Series: Standard Line Application: Drills for Metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can I drill with the Twist Drill by MetavCUT and which machines suit it best? The MetavCUT Twist Drill is optimised for Metal machining and performs well in Alloyed and Unalloyed Steel, Cast Iron and Hard Plastics when used in a suitable Drilling Machine. For best results use steady clamping and coolant to maintain tool life. For what is a Twist Drill mainly used? A Twist Drill is primarily applied to the machining of highly stressed materials and larger drill diameters. Its shape allows relatively simple resharpening and it withstands high loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three main drill types are Metal Drill, Wood Drill and Stone/Concrete Drill.

Spiralbohrer von MetavCUT – Bohrer für Metall, 5 mm, 135° Spitzenwinkel, extra lang, blank, HSS-G, DIN 1869 Der Spiralbohrer von MetavCUT ist ein extra langer HSS‑G Bohrer für Metall, ideal für tiefe Bohrungen mit 5 mm Durchmesser und einem Spitzenwinkel von 135°. MetavCUT Standard Line extra lang für tiefe Bohrungen HSS‑G Material für präzise Metallbearbeitung Geschliffener Schaft für hohe Rundlaufgenauigkeit 135° Spitzenwinkel: geeignet für harte Werkstoffe DIN 1869 Konformität für industrielle Anwendung Hohe Präzision und Belastbarkeit für harte Werkstoffe Der Bohrer basiert auf HSS‑G (geschliffenem Schnellarbeitsstahl) und erfüllt die DIN 1869, wodurch saubere und exakte Bohrungen in legierten und unlegierten Stahl sowie Gusswerkstoffen möglich sind. Dank des geschliffenen Profils entstehen scharfe Schneidkanten und eine hohe Rundlaufgenauigkeit, die besonders bei Metallarbeiten eine entscheidende Rolle spielt. Dadurch lassen sich Bohrlöcher mit reproduzierbarer Qualität erzeugen. Effizientes Bohren in großer Tiefe Die extra lange Ausführung mit einer Gesamtlänge von 195 mm und einer Spiralänge von 135 mm ist für tiefe Bohrungen konzipiert. Die spezielle Geometrie reduziert die benötigte Anpresskraft und ermöglicht schnellere Vorschübe; durch den CNC‑Schliff kann die Bohrleistung gegenüber konventionellen HSS‑Bohrern erhöht werden. Diese Länge bietet klare Vorteile bei schwer zugänglichen Stellen und verlängerten Bohrwegen. Geeignet für professionelle Anwendungen und Werkstattbetrieb Entwickelt als Bohrer für Metall, eignet sich das Werkzeug besonders für Anwendungen in Werkstätten, Maschinenbau und industriellen Fertigungen. Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe wie Edelstahl und Grauguss und reduziert Aufriss und Ausbrüche. Beachten: Geschliffene Bohrer sind sehr präzise, können bei unsachgemäßer Handhabung jedoch spröder reagieren; daher empfiehlt sich der Einsatz mit geeigneter Kühlung und stabiler Spannaufnahme. Einfache Handhabung, klare Einsatzempfehlungen Der vollständig geschliffene Schaft sorgt für sicheren Halt in Bohrfuttern von Handbohrmaschinen und stationären Geräten. Die blanke Oberfläche ermöglicht eine schnelle Späneabfuhr und gute Sichtbarkeit während der Arbeit. Für beste Ergebnisse sollten geeignete Schnittwerte, Kühlschmierstoff und eine angepasste Vorschubgeschwindigkeit verwendet werden, um Lebensdauer und Standzeit zu maximieren. Für präzise Tiefbohrungen empfiehlt METAVCUT die extra lange HSS‑G Ausführung aus der Standard Line – bei Fragen zur Anwendung oder Zustimmung der technischen Daten steht METAV Werkzeuge gerne mit persönlicher Beratung zur Verfügung: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technische Informationen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 32050-FDA Durchmesser: 5 mm Gesamtlänge: 195 mm Spirallänge: 135 mm Spitzenwinkel: 135° Ausführung: extra lang Schaft Ausführung: geschliffen Farbe: blank Material: HSS-G Norm: DIN 1869 Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für was benutzt man den Spiralbohrer von MetavCUT, Bohrer für Metall? Der Spiralbohrer von MetavCUT wird vor allem bei der Bearbeitung hochfester Werkstoffe und bei großen Bohrdurchmessern eingesetzt. Seine Form erlaubt ein leichtes Nachschleifen und er hält auch höheren Belastungen stand, weshalb er sich besonders für anspruchsvolle Metallarbeiten eignet. Welche 3 Bohrertypen gibt es und wie ordnet sich der MetavCUT Spiralbohrer ein? Die drei Grundtypen sind Metallbohrer, Holzbohrer und Stein-/Betonbohrer. Der MetavCUT Spiralbohrer gehört zur Gruppe der Metallbohrer und ist speziell für die Metallbearbeitung und tiefe Bohrungen ausgelegt.

Twist Drill — Extra Long HSS‑G, 5 mm, 135°, Bright Finished, Fully Ground Shank (DIN 1869) The Twist Drill is an extra long, bright finished metalworking drill designed for Drilling Machine use, offering a 5 mm diameter, 245 mm overall length and a 135° point angle for precise deep-hole metal drilling. Extra long design for deep holes Fully ground shank for high runout accuracy HSS‑G material for hard metals and plastics DIN 1869 standard for deep‑hole performance 170 mm spiral length for extended cutting reach High performance drilling power for demanding metalwork The HSS‑G Extra Long Twist Drill delivers reliable metal removal with optimized cutting geometry. With a 5 mm diameter and 170 mm spiral length within a 245 mm overall length, this drill is built for deep and hard‑to‑reach applications. The 135° point angle reduces initial cutting forces on tougher materials and improves centring, while the bright finish minimises adhesion. The product is particularly suited for drilling alloyed and unalloyed steels, cast irons, sintered materials, non‑ferrous metals and hard plastics, offering measurable efficiency gains compared with standard drills. Precise, ground geometry for clean holes and reduced effort CNC grinding of the flute geometry (designation HSS‑G) produces very sharp cutting edges and excellent concentricity, which yields clean, accurate holes and improves tool life under correct conditions. Due to the grinding process, the Twist Drill shows superior runout behaviour and cutting precision compared with rolled equivalents. The trade‑off is higher brittleness; therefore the tool performs best in well‑clamped setups with appropriate cooling. The ground design also supports up to 40% faster drilling and requires up to 50% less thrust under suitable conditions, reducing operator effort on demanding materials. Designed for professionals who need reach and reliability This Extra Long Twist Drill targets workshop professionals, maintenance technicians and metal fabricators who require extended reach without sacrificing accuracy. The fully ground shank ensures secure clamping and repeatable concentricity in Drilling Machines and suitable hand drills. For deep bores, long‑reach maintenance tasks or when access is limited, the Extended Spiral Length enables straight, reliable holes. For optimal results, use steady feed, coolant where appropriate and a stable chuck or collet. Compliance, handling and application guidance Manufactured to DIN 1869 in the Standard Line, the Twist Drill meets expectations for deep‑hole performance in materials up to approximately 1000 N/mm², including grey cast iron and various steels. The bright finished surface eases chip evacuation in many situations. When selecting operating parameters, match cutting speed and feed to the workpiece material and use cooling for ductile or heat‑sensitive metals. The 135° point angle is particularly advantageous for stainless and other hard materials because it reduces spalling and improves centring during penetration. Trust MetavCUT’s Twist Drill for demanding deep‑hole metal work — for personalised technical advice or to confirm suitability for specific tasks please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 33050-FDA Diameter: 5 mm Overall Length: 245 mm Spiral Length: 170 mm Point Angle: 135° Material: HSS‑G Execution: Extra Long Shank Finish: Fully Ground Surface Finish: Bright Finished Model Series: Standard Line Standard: DIN 1869 Application: Drills for metal Suitable For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill is designed primarily for metalworking: alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron, temper castings, non‑ferrous metals and hard plastics, making it a versatile choice for workshop and industrial drilling tasks. How does the fully ground shank benefit drilling accuracy? A fully ground shank on the MetavCUT Twist Drill ensures reduced runout and more precise centring in the chuck or collet, which translates into cleaner holes and improved repeatability in machining operations. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and large drilling diameters. Their geometry allows straightforward regrinding and they withstand higher loads, making them suitable for deep and heavy‑duty drilling in metals. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑thinned (ausgespitzt)? Point thinning reduces the cross‑cut at the tip of the Twist Drill, lowering friction and thus reducing required feed forces while improving centring accuracy in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but it will typically offer poorer guidance and a less clean finish than a dedicated wood drill; however, it is easier to resharpen and shows less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through‑hole drilled with a Twist Drill is common practice. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is incorrect. Evaluate working conditions carefully to decide whether HSSE’s higher cost is justified for the intended application.

Twist Drill — HSS-G Twist Drill, 5 mm, 135° tip, Extra Long, Bright Finished, Fully Ground Shank, DIN 1869 The Twist Drill is an extra long HSS-G drill for Drilling Machines, engineered for deep metal drilling and precision holes in demanding workshop applications. Extra long design for deep drilling HSS-G ground geometry for precise holes 135° tip angle for hard materials Fully ground shank for high runout accuracy Conforms to DIN 1869 for deep-hole applications Engineered for deep metal drilling and higher throughput The Twist Drill is manufactured in HSS-G quality and designed as an extra long tool to reach deeper bore depths than standard bits. This geometry reduces the need for extensions or multi-step drilling, enabling efficient processing of metal components. The combination of ground flute geometry and optimized point form results in up to 40% faster drilling and requires about 50% less feed force, which directly increases productivity and reduces operator fatigue. Precise cutting geometry for tough materials With a 135° tip angle and CNC-ground flutes, this HSS-G bit is tailored to start cleanly in harder materials and maintain concentricity during the cut. The fully ground shank and sharp cutting edges provide excellent runout accuracy and produce clean, burr-reduced holes. Conformance to DIN 1869 signals suitability for deep-hole tasks and use in alloyed and unalloyed steels, grey cast iron, sintered materials and hard plastics when appropriate coolant and speeds are used. Compatibility with drilling machines and usage recommendations Designed for use in a Drilling Machine, the bright finished surface and ground shank simplify clamping and alignment. Due to the grinding process (HSS-G), the tool can be more brittle than rolled types; therefore stationary drilling or proper clamping with coolant is recommended to avoid breakage. Operators will benefit from the bit’s behavior under load: reduced thrust makes handling easier and improves hole quality in serial or repair work. Ideal users and application contexts Metalworking professionals, maintenance technicians and toolroom operators will find this drill especially useful where deep, precise holes in metal are required. The Standard Line model series targets workshops that need reliable, repeatable performance rather than single-use convenience. The extra length and HSS-G construction make it a practical choice for repair jobs, pattern making and production tasks where access is limited. Strong recommendation: For demanding deep-hole metalwork choose the MetavCUT HSS-G Extra Long Twist Drill for reliable penetration and consistent hole quality — for personal technical advice or to confirm suitability for a specific application please contact METAV Werkzeuge directly at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 34050-FDA Diameter: 5 mm Tip Angle: 135° Material: HSS-G Execution: extra long Colour: bright finished Spiral Length: 210 mm Total Length: 315 mm Shank Execution: fully ground For Drilling Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Norm: DIN 1869 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for? The MetavCUT Twist Drill is intended primarily for deep-hole drilling and the machining of high-strength and difficult-to-cut metals; it excels in tasks requiring long reach and consistent hole quality under workshop conditions. Can the MetavCUT Twist Drill be used in a handheld drill? While the MetavCUT Twist Drill can physically be clamped in portable equipment, its HSS-G ground construction and extra length make it best suited to stable Drilling Machines or well-supported setups to minimize the risk of breakage. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and large bore diameters. Its shape is easy to grind and withstands higher loads. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills. Why are twist drills pointed? Pointing reduces the cross-cutting edge at the tip of the Twist Drill. By pointing, friction forces are significantly decreased and lower feed forces are required, while the drill tip centers more precisely in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood but typically provides inferior guidance and a less clean finish than dedicated wood drills. Metal bits are easier to resharpen and have less self-feed tendency. At which depths is the Twist Drill the most used tool? Solid drilling with a Twist Drill is common. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is incorrect. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified.

Twist Drill — Drill Bit, 6.5 mm, 135° point angle, extra-long, bright-finished, HSS-G, DIN 1869 A Twist Drill Drill Bit for deep metal drilling, optimised for Drilling Machines and hand-held drills. Extra-long geometry for deep drilling HSS-G material for high wear resistance 135° tip for harder materials Fully-ground shank for precise runout Conforms to DIN 1869 for demanding conditions Engineered for accurate, high-performance metal cutting This HSS-G Twist Drill combines a ground flute geometry with a high-speed-steel alloy to deliver clean, precise holes in tough materials. The CNC grinding process produces very sharp cutting edges and high concentricity, which reduces vibration and improves surface finish. As a result, drilling in alloyed and unalloyed steel, cast iron and non-ferrous metals becomes noticeably more consistent, while the reduced required feed force eases operator handling and minimises tool deflection. Deep holes and secured centring for demanding tasks Designed with an extra-long overall length and an extended spiral length, the geometry allows access to recessed or hard-to-reach positions without sacrificing stability. The 135° point angle is optimised for harder materials and shortens the initial plunge time while improving centring and chip evacuation. With a total length of 215 mm and a flute length of 150 mm, the bit is particularly suitable where standard lengths are insufficient and deep through-holes or extended reaches are required. Built for workshops, maintenance and production environments Manufactured for users who need reliable performance in metalworking, this Drill Bit suits machine shops, maintenance departments and on-site technicians working with steels up to 1000 N/mm². Compliance with DIN 1869 ensures reproducible quality and compatibility with industrial processes. The bright-finished surface supports easy visual inspection and handling on the shop floor while the fully-ground shank improves clamping accuracy in chucks and collets. Handling advice to maximise life and performance Because ground Twist Drills can be more prone to shock than rolled types, controlled machining parameters are recommended. Use appropriate cutting speeds, steady feed and coolant when drilling deep or hard materials to avoid thermal overload and chipping. If working with stainless or high-strength steels, the 135° tip and HSS-G composition reduce the tendency to work-harden; nevertheless, intermittent peck drilling or backing-off is advised for chip control during long bores. Regular inspection and resharpening extend service life while maintaining hole quality. Opt for the MetavCUT extra-long HSS-G Twist Drill for reliable deep-hole performance — for technical advice and application support contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 32065-FDA Diameter: 6,5 mm Point angle: 135° Overall length: 215 mm Spiral length: 150 mm Execution: extra long Shank execution: fully ground Colour: bright finished For drilling machine: Drilling Machine / Hand Drill Material: HSS-G Model series: Standard Line Norm: DIN 1869 Application: Drills for metal Story trigger: bohrer UID: 32065-FDA Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is this Twist Drill by MetavCUT best used for? The MetavCUT Twist Drill Drill Bit is primarily designed for drilling in metals; it excels in alloyed and unalloyed steel, cast iron and non-ferrous metals where deep, precise holes are required. Its HSS-G composition and ground geometry make it suitable for demanding workshop and production applications. Can the MetavCUT Twist Drill be used with a hand-held drill? Yes, the Twist Drill by MetavCUT is suitable for use in both Drilling Machines and hand-held drills, though for very deep or high-precision holes a machine-mounted setup with coolant and steady feed is recommended. For what are Twist Drills used? Twist Drills are mainly applied to the machining of high-strength materials and large-diameter drilling. Their geometry allows efficient chip removal and, when sharpened correctly, they withstand higher loads and cutting forces. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point-ground (ausgespitzt)? Point-grinding reduces the cross-cutting edge at the tip, significantly lowering friction and required feed forces. It also improves the drill’s centring ability in the workpiece. Can a metal drill be used for wood? A metal drill can be used in wood, but guidance is poorer and the hole finish is typically less clean. Metal drills are easier to resharpen and have less self-feed than dedicated wood bits. For which drilling depths is the Twist Drill most used? A Twist Drill is commonly used for solid drilling. It is the most frequently used tool for diameters up to 20 mm and drilling depths up to 100 mm in many workshop settings.

Spiralbohrer 6,5 mm | HSS‑G extra lang, blank, geschliffen, DIN 1869 Der Spiralbohrer ist ein extra langer HSS‑G Spiralbohrer für Metall mit 6,5 mm Durchmesser und 135° Spitzenwinkel, konzipiert für tiefe Löcher und anspruchsvolle Werkstoffe. Spiralbohrer 6,5 mm HSS‑G extra lang nach DIN 1869 Tieflochspirale für extra tiefe Metallbohrungen Geschliffener Schaft für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für härtere Werkstoffe wie Edelstahl Bis zu 40 % schnelleres Bohren bei reduzierter Anpresskraft Überlegene Schnittleistung durch geschliffene HSS‑Geometrie Dank HSS‑G und geschliffener Fertigung liefert dieser Bohrer eine deutlich schärfere Schneide als gewalzte Varianten. Das Ergebnis ist ein sauberer Spanfluss und eine höhere Rundlaufgenauigkeit, was besonders bei Metallbohrungen die Nachbearbeitung reduziert. Anwender profitieren von einem bis zu 40 % schnelleren Vorschub und einer um rund 50 % geringeren Anpresskraft im Vergleich zu herkömmlichen HSS‑Bohrern, wodurch Arbeitszyklen effizienter gestaltet werden. Speziell für extra tiefe Metallbohrungen konstruiert Die Tieflochspirale und die verlängerte Arbeitslänge (Spirallänge 190 mm, Gesamtlänge 275 mm) ermöglichen das Bohren deutlich tieferer Löcher ohne sofortiges Verstopfen durch Späne. Diese Konstruktion erleichtert das Abführen von Spänen und reduziert das Blockier- beziehungsweise Verruckungsrisiko bei tiefen Durchführungen. Für Anwendungen in Gussstahl, Sinterteilen oder dicken Blechen schafft die Bauart verlässliche Voraussetzungen für wiederholbare Ergebnisse. Einsatzbereich und Maschineneignung für sichere Anwendungen Mit einem Durchmesser von 6,5 mm fällt der Bohrer in den Standard‑Bereich und ist für Werkstatt, Montage und DIY‑Projekte geeignet. Der Bohrer eignet sich für Handbohrmaschinen ebenso wie für stationäre Säulenbohrmaschinen, liefert aber die besten Ergebnisse bei gleichmäßigem Vorschub und Kühlung. Für präzise Passungen empfiehlt es sich, vorzuprüfen und gegebenenfalls mit einem Zentrierbohrer anzupunkten, um Seitenwandwandern zu vermeiden. Praktische Hinweise für Langlebigkeit und sichere Handhabung Da der Bohrer geschliffen ist, bietet er hohe Präzision, kann aber bei unsachgemäßer Nutzung empfindlicher reagieren als walzgeformte Varianten. Empfohlen werden mäßige Drehzahlen, konstante Kühlung und gelegentliches Zurückziehen zur Spanabfuhr. Bei Arbeiten in härteren Werkstoffen sorgt der 135° Spitzenwinkel für ein kontrolliertes Anbohren und geringere Wanderneigung. Empfehlung: Den MetavCUT Spiralbohrer mit HSS‑G und Tieflochspirale wählen, um tiefe Metallbohrungen effizient, präzise und zuverlässig auszuführen — bei Unsicherheiten oder Fragen berät METAV Werkzeuge gern persönlich per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 33065-FDA Durchmesser: 6,5 mm Material: HSS-G Ausführung: extra lang Farbe: blank Schaft Ausführung: geschliffen Spitzenwinkel: 135° Spirallänge: 190 mm Gesamtlänge: 275 mm Norm: DIN 1869 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der Spiralbohrer von MetavCUT geeignet? Der Spiralbohrer von MetavCUT (HSS‑G, 6,5 mm) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff; bei sehr harten Werkstoffen ist auf passende Drehzahl und Kühlung zu achten. Kann der Spiralbohrer 6,5 mm von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer 6,5 mm von MetavCUT ist für den Einsatz mit Handbohrmaschine geeignet; für beste Ergebnisse bei tiefen Bohrungen empfiehlt sich ein stationäres Vorgehen oder stabile Spannaufnahme. Wie vermeide ich Bruch bei dem geschliffenen Spiralbohrer von MetavCUT? Um Bruch zu vermeiden, sollte der geschliffene Spiralbohrer von MetavCUT mit moderater Drehzahl, kontinuierlicher Kühlung und ohne übermäßigen Vorschub betrieben werden und bei tiefen Bohrungen regelmäßig zur Spanabfuhr zurückgezogen werden. Warum ist der 135° Spitzenwinkel beim MetavCUT Spiralbohrer vorteilhaft? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert das Anlaufen und verbessert die Standzeit beim Bohren härterer Werkstoffe wie Edelstahl, wodurch das Anbohren kontrollierter und präziser gelingt. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#33065-FDA","sku":"33065-FDA","mpn":"33065-FDA","name":"Spiralbohrer 6,5 mm HSS-G extra lang","description":"Extra langer Spiralbohrer 6,5 mm HSS-G nach DIN 1869 mit Tieflochspirale, geschliffenem Schaft und 135° Spitzenwinkel; konzipiert für tiefe Metallbohrungen in legierten und unlegierten Stählen, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoffen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"6,5 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Spirallänge","value":"190 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"275 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}],"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Tieflochspirale"},{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"135° Spitzenwinkel"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der Spiralbohrer von MetavCUT geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 6,5 mm HSS-G von MetavCUT eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff; bei sehr harten Werkstoffen sind passende Drehzahl und Kühlung empfehlenswert."}},{"@type":"Question","name":"Kann der Spiralbohrer 6,5 mm HSS-G von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 6,5 mm HSS-G von MetavCUT kann in einer Handbohrmaschine verwendet werden; für sehr tiefe Bohrungen sind stationäre Maschinen oder eine stabile Spannaufnahme für beste Ergebnisse zu bevorzugen."}},{"@type":"Question","name":"Wie vermeide ich Bruch bei dem geschliffenen Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Um Bruch zu vermeiden, sollte der geschliffene Spiralbohrer 6,5 mm HSS-G von MetavCUT mit moderater Drehzahl, kontinuierlicher Kühlung und ohne übermäßigen Vorschub betrieben werden; bei tiefen Bohrungen regelmäßig zur Spanabfuhr zurückziehen."}},{"@type":"Question","name":"Warum ist der 135° Spitzenwinkel beim MetavCUT Spiralbohrer vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert das Anlaufen und erhöht die Standzeit beim Bohren härterer Werkstoffe wie Edelstahl, wodurch das Anbohren kontrollierter und präziser gelingt."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-6-5mm-hss-g-extra-lang","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"Extra tiefe Bohrungen"},{"@type":"Thing","name":"HSS-G geschliffen"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"DIN 1869"},{"@type":"Thing","name":"Handbohrmaschine"}]}]}

Twist Drill — 6.5 mm, 135° Point Angle, Extra Long, Bright Finished, HSS‑G, DIN 1869 The Twist Drill is an extra‑long HSS‑G drill designed for deep metal drilling with a 135° point angle and a bright finished, fully ground shank for high precision in demanding machining tasks. Extra‑long design for deep bore reach 6.5 mm Diameter with 235 mm Spiral Length 135° Point Angle for harder materials Fully ground (HSS‑G) for high runout accuracy Complies with DIN 1869 for demanding conditions Durable HSS‑G construction for precise metalwork The drill is made from HSS‑G, a high‑speed steel that is CNC‑ground to achieve sharp cutting edges and excellent roundness. This fully ground geometry reduces vibration and produces cleaner holes in alloys and hard materials. For users this means fewer reworks and better repeatability when machining components that require tight tolerances. Extra‑long geometry solves deep drilling challenges With an extra‑long overall length of 350 mm and a spiral (flute) length of 235 mm, this tool reaches deeper bore positions where standard drills cannot. The elongated design allows comfortable access in hard‑to‑reach setups and reduces the need for extensions. The 135° point angle shortens entry time in tougher steels and improves centring when starting a hole. Performance advantages and recommended machining practice Compared with standard HSS tools, the ground HSS design can deliver up to 40% faster drilling and requires less axial force, improving operator comfort and machine load. The Twist Drill by MetavCUT is intended primarily for drilling legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Nichteisenmetalle and hard plastics; use adequate coolant and reduced feed rates at greater depths to minimise breakage risk and extend tool life. Who benefits and how to get support Manufacturers, toolrooms and maintenance teams that demand long reach and high precision will find this Twist Drill particularly suitable. For stationary or machine‑based work, the bright finish and precise geometry ensure consistent hole quality. If uncertain whether this tool meets specific requirements or for complementary technical data, METAV Werkzeuge offers expert advice and application support. Contact METAV Werkzeuge for customised recommendations and assistance with feed, speed and coolant selection. I recommend the MetavCUT extra‑long HSS‑G Twist Drill for any deep metal drilling task that requires precision and enhanced tool life — for personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 34065-FDA Diameter: 6.5 mm Point angle: 135° Type / Execution: Extra long Finish / Colour: Bright finished Spiral length (Flute length): 235 mm Overall length: 350 mm Shank execution: Fully ground Material: HSS‑G Applicable machines: Drilling Machine (Hand drill suitable with precautions) Application: Drills for metal Model series: Standard Line Standard / Norm: DIN 1869 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The Twist Drill from MetavCUT (Twist Drill) is mainly used for machining high‑strength materials and larger hole diameters; it is especially suitable for alloyed and unalloyed steel, cast steel, cast iron, non‑ferrous metals and hard plastics thanks to its HSS‑G composition and ground geometry. Can the MetavCUT Twist Drill be used for deep holes and what makes it suitable? Yes, the MetavCUT Twist Drill is designed for deep bores; its extra‑long overall length and a 235 mm spiral length, combined with the DIN 1869 Tieflochspirale, make it ideal for bore depths and difficult access situations. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high‑strength materials and large hole diameters. Its shape allows easy resharpening and the ground geometry endures substantial loads, making it suitable for demanding metalworking. Which 3 drill types are there? Commonly distinguished drill types are: Metal drill (Metal drill), Wood drill (Wood drill), and Masonry/Concrete drill (Stone/Concrete drill). Why are Twist Drills pointed? Pointing reduces the cross‑edge at the drill tip; by pointing the Twist Drill the friction forces at the tip are substantially lowered, which requires less feed force and improves centring of the drill in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood but guidance and finish are inferior compared with dedicated wood drills. The MetavCUT Twist Drill can cut wood, yet results are less clean and the tool may have more tendency to pull itself in. For which depths is the Twist Drill most commonly used? A through hole in solid material is commonly executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are universally superior to HSS is incorrect. Evaluate whether your working conditions justify the higher purchase cost of HSSE; for many applications HSS‑G (ground HSS) as used in the MetavCUT Twist Drill offers an optimal balance of performance and economy.

Spiralbohrer (MetavCUT) – extra lang, HSS‑G, Ø 6 mm, Spitzenwinkel 135°, DIN 1869, blank Der Spiralbohrer von MetavCUT ist ein extra langer HSS‑G Bohrer für präzise Metallbohrungen, ideal für tiefe Löcher und schwer zugängliche Stellen mit hoher Laufruhe. Extra lange Gesamtlänge für tiefe Bohrungen Geschliffene Spiralgeometrie für saubere Bohrbilder HSS‑G Material für hohe Schnittfähigkeit in Stahl 135° Spitzenwinkel für zähe Werkstoffe Geeignet für Handbohrmaschine und stationäre Anwendung Schnelleres Bohren bei reduziertem Kraftaufwand Der extra lange, geschliffene HSS‑G Spiralbohrer ermöglicht durch die präzise Schleifgeometrie ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Ausführungen. Das Ergebnis ist eine spürbare Arbeitszeiteinsparung und geringerer Bedieneraufwand, besonders bei häufigen Durchgangsbohrungen in legiertem und unlegiertem Stahl. Die optimierte Schneidengeometrie trägt zu saubereren Bohrlöchern und gleichmäßiger Spanabfuhr bei. Präzision und Laufruhe auch bei tiefen Bohrungen Die Tieflochspirale mit Spirallänge 140 mm und die extra lange Gesamtlänge 205 mm sorgen dafür, dass Späne zuverlässig abtransportiert werden und die Bohrstelle frei bleibt. Durch das geschliffene Schaftprofil wird die Rundlaufgenauigkeit verbessert, was saubere, konzentrische Bohrlöcher fördert. Nutzer profitieren von reduzierten Nacharbeiten und einer höheren Maßhaltigkeit beim Bohren in Gussstahl, Temperguss und Hartkunststoff. Materialwahl und Schneidkante für anspruchsvolle Werkstoffe Gefertigt aus HSS‑G und mit Spitzenwinkel 135° ausgelegt, ist der Bohrer besonders geeignet für grauen Guss, legierten und unlegierten Stahl bis 1000 N/mm² sowie für Nichteisenmetalle. Der größere Spitzenwinkel reduziert das Anbohren bei harten Werkstoffen und verlängert die Standzeit unter passenden Schnittbedingungen. Für die optimale Lebensdauer empfiehlt sich die Nutzung passender Kühlschmierstoffe und moderater Schnittparameter. Praktische Einsatzempfehlungen und Sicherheitshinweise Bei Einsatz mit Handbohrmaschine bietet der Bohrer durch die Standarddurchmesser‑Klasse gute Alltagstauglichkeit; dennoch sind stabile Spannmittel und gleichmäßiger Vorschub wichtig, um Bruch zu vermeiden. Für besonders tiefe oder hochpräzise Löcher wird die Verwendung stationärer Bohrmaschinen oder Vorbohren empfohlen. Wegen der geschliffenen Ausführung ist Vorsicht bei Verkantungen geboten; Kühlung verbessert Spanabfuhr und Standzeit. Zielgruppe und typische Anwendungen Dieser Spiralbohrer richtet sich an Handwerker, Maschinenbauer und ambitionierte Heimwerker, die tiefe Metallbohrungen in Werkstatt oder Produktion durchführen. Typische Aufgaben sind das Bohren in Baustahl, Guss, Sintereisen sowie Montagearbeiten, bei denen tiefe, saubere Löcher gefordert sind. Die Kombination aus extra Länge und geschliffener Geometrie macht das Werkzeug besonders geeignet für Reparaturarbeiten und Instandhaltung. Für anspruchsvolle Tieflochbohrungen empfiehlt METAVCUT die Nutzung dieses extra langen HSS‑G Spiralbohrers; bei Fragen zur Anwendung oder Wahl der passenden Maschine steht METAV Werkzeuge jederzeit per eMail, Telefon oder WhatsApp zur Verfügung: info@metav-werkzeuge.com · +49 2822 7131930 · +49 170 2837271 Technische Daten für schnelle Auswahl Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 32060-FDA Durchmesser: 6 mm Spitzenwinkel: 135° Material: HSS‑G Norm: DIN 1869 Ausführung: extra lang Gesamtlänge: 205 mm Spirallänge: 140 mm Schaft Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑G Ausführung mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; bei Edelstahl ist angepasste Schnittgeschwindigkeit und ausreichende Kühlung empfehlenswert, um Standzeiten zu erhöhen. Kann der Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT wurde für den Einsatz mit Handbohrmaschine freigegeben, allerdings sorgt stabile Spannaufnahme und moderater Vorschub für beste Ergebnisse. Welche Vorteile bietet die geschliffene Schaftausführung beim Spiralbohrer von MetavCUT? Die geschliffene Schaftausführung beim Spiralbohrer von MetavCUT verbessert Rundlaufgenauigkeit und liefert sauberere Bohrbilder, was besonders bei präzisen Metallbohrungen Zeit spart. Wie tief kann mit dem Spiralbohrer von MetavCUT sicher gebohrt werden? Dank der extra langen Spirallänge ist der Spiralbohrer von MetavCUT für tiefe Durchgangsbohrungen ausgelegt; bei sehr tiefen Sacklochbohrungen empfiehlt sich die schrittweise Vorgehensweise und passende Kühlung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#32060-FDA","sku":"32060-FDA","mpn":"32060-FDA","name":"Spiralbohrer 32060-FDA","description":"Extra lang, HSS‑G, Ø 6 mm, Spitzenwinkel 135°, DIN 1869, blank; Extra lange Gesamtlänge 205 mm und Spirallänge 140 mm für tiefe Durchgangsbohrungen; Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit; Geeignet für Handbohrmaschine und stationäre Anwendung in Baustahl, Gussstahl, Temperguss und Nichteisenmetallen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"6 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS‑G"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"205 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"140 mm"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]} ,{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT in HSS‑G Ausführung mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; bei Edelstahl sind angepasste Schnittgeschwindigkeit und ausreichende Kühlung empfehlenswert, um Standzeiten zu erhöhen."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT wurde für den Einsatz mit Handbohrmaschine freigegeben; stabile Spannaufnahme und moderater Vorschub sorgen für beste Ergebnisse."}},{"@type":"Question","name":"Welche Vorteile bietet die geschliffene Schaftausführung beim Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Schaftausführung beim Spiralbohrer von MetavCUT verbessert die Rundlaufgenauigkeit und liefert sauberere Bohrbilder, was besonders bei präzisen Metallbohrungen Zeit spart."}},{"@type":"Question","name":"Wie tief kann mit dem Spiralbohrer von MetavCUT sicher gebohrt werden?","acceptedAnswer":{"@type":"Answer","text":"Dank der extra langen Spirallänge ist der Spiralbohrer von MetavCUT für tiefe Durchgangsbohrungen ausgelegt; bei sehr tiefen Sacklochbohrungen empfiehlt sich schrittweises Vorgehen und passende Kühlung."}}]} ,{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer EXTRA LANG"},{"@type":"Thing","name":"HSS‑G für Metalle"},{"@type":"Thing","name":"Tieflochspirale 140 mm"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine geeignet"},{"@type":"Thing","name":"Geschliffene Schaftausführung"},{"@type":"Thing","name":"Spitzenwinkel 135°"},{"@type":"Thing","name":"DIN 1869"}]}]}

Twist Drill — Extra Long HSS‑G Drill Bit, Ø 6 mm, 135° Tip, Bright Finished, Fully Ground Shank, DIN 1869 The Twist Drill is an extra‑long HSS‑G drilling bit designed for deep metal drilling with a 135° tip, suited for use in drilling machines and hand drills. Extra long design for deep holes HSS‑G material for precise metal drilling 135° tip for harder workpieces Fully ground shank for high concentricity Bright finished surface for smooth chip evacuation Optimised for deep, demanding metal drilling This extra‑long HSS‑G bit is engineered to tackle deep holes where standard lengths fail. The extended overall length and long flute geometry enable access in recessed or hard‑to‑reach areas while maintaining chip removal. Thanks to the DIN 1869 standard geometry and a 135° tip, the bit starts reliably in harder materials and reduces wandering on tough surfaces. The result is consistent hole quality in applications where reach and precision matter most. High cutting performance with lower feed force The fully ground geometry (CNC grind) produces sharp cutting edges and excellent roundness, which translates into noticeably improved cutting behaviour. The manufactured data indicate up to 40% faster drilling and 50% less required feed force compared with conventional HSS bits, allowing higher efficiency on alloyed and unalloyed steels. The combination of HSS‑G and the ground flute makes this tool especially suitable for metalworking tasks that demand speed and repeatable accuracy. Application scope and recommended working conditions Suitable for drilling Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast Iron, Non‑Ferrous Metals and Hard Plastics, this bit performs best in stationary drilling machines or robust hand drilling setups. For deep holes and continuous operation, use of coolant and stable clamping is advised to reduce heat and avoid premature wear. The feature set makes it ideal for workshops, toolrooms and industrial maintenance where durable, precise drilling into hard materials is required. Handling, durability and reconditioning The bright finished surface supports efficient chip flow and simplifies manual handling, while the fully ground shank ensures better concentricity in chucks and reduced runout. Ground Twist Drills are easier to re‑sharpen to regain cutting geometry; however, they can be more brittle than rolled variants, so careful use and adequate cooling extend service life. For safe, reliable results, pair the bit with appropriate speeds and steady feed rates matched to the workpiece material. Strong recommendation for applications needing deep, precise metal holes: choose the MetavCUT extra‑long HSS‑G Twist Drill and contact METAV Werkzeuge for expert advice — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33060-FDA Diameter: 6 mm Tip angle: 135° Overall length: 260 mm Spiral length: 180 mm Version / Execution: Extra long Material: HSS‑G Shank execution: Fully ground Surface / Finish: Bright finished Intended for: Drilling Machine / Hand drill Model series: Standard Line Standard / Norm: DIN 1869 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill handle? The MetavCUT Twist Drill is designed primarily for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered cast iron, non‑ferrous metals and hard plastics; its HSS‑G composition and ground geometry make it suitable for demanding, hard materials. Is coolant recommended when using the MetavCUT Twist Drill? For deep holes and harder materials, using coolant with the MetavCUT Twist Drill is recommended to manage heat, reduce wear and maintain cutting edge life; coolant also helps evacuate chips and improves hole quality. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger hole diameters; this geometry is easy to sharpen and withstands significant loads, making it suitable for challenging metalworking applications. Which three drill types exist? The three primary drill categories are metal drills, wood drills and masonry/concrete drills.

Twist Drill — Extra Long HSS‑G Twist Drill for Drilling Machine, Ø 6 mm, 135°, Bright Finished, DIN 1869 The Twist Drill is an extra long HSS‑G drill for metalworking, designed for deep holes and hard materials and optimised for use in a Drilling Machine. Extra long design for deep holes 135° point angle for hard materials HSS‑G ground flutes for precise, clean holes Fully ground shank for high concentricity DIN 1869 compliant for deep‑hole applications Precise metal cutting through ground HSS‑G construction The extra long Twist Drill features a HSS‑G (ground high‑speed steel) geometry that produces very sharp cutting edges and a high degree of precision. Grinding the flutes instead of rolling yields improved Rundlaufgenauigkeit and cleaner hole surfaces, which reduces the need for rework. This construction also allows for faster drilling with lower feed forces compared to conventional HSS designs. Use of coolant and appropriate spindle speeds preserves the cutting edge and extends service intervals. Designed for deep and difficult access drilling in metals With an overall length of 330 mm and a spiral length of 225 mm, this extra long design meets the demands of deep bore operations. The 135° point angle makes the bit particularly suitable for harder materials such as alloyed and unalloyed steel and cast iron, where a larger point angle shortens initial cutting time. Conforming to DIN 1869 for deep‑hole capability, the geometry manages chip evacuation under challenging conditions, helping to avoid clogging during extended bores. Suited for workshops, toolrooms and maintenance operations The Twist Drill by MetavCUT is intended for professional metalworkers, maintenance teams and toolroom operators who require reliable deep‑hole performance. In a Drilling Machine it excels at producing accurate cylindrical holes in components, and its design is compatible with stationary setups where coolant can be applied. The bit’s characteristics make it especially useful when precision and repeatability matter, for sample preparation, pattern making or repair work. Handling recommendations to maximise lifetime and safety Because ground HSS can be more brittle than rolled alternatives, correct feed and cooling are essential: moderate feed rates, continuous cooling and firm clamping are recommended to avoid breakage. The fully ground shank improves runout and grip in the chuck, reducing vibration and improving hole quality. If re‑sharpening is required, the ground geometry permits precise reconditioning; however, rework should be done by experienced staff or in a tool shop to retain the original cutting geometry. Prefer MetavCUT quality for deep metal drilling — for technical advice or to confirm suitability contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 34060-FDA Diameter: 6 mm Point Angle: 135° Execution: Extra long Colour: Bright finished For Drilling Machine: Drilling Machine Spiral Length: 225 mm Overall Length: 330 mm Shank Finish: Fully ground Model Series: Standard Line Material: HSS‑G Standard: DIN 1869 Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill (Drill for Metal) best suited for? The MetavCUT Twist Drill (Drill for Metal) is optimised for a range of metals: alloyed and unalloyed steel, cast steel, cast iron and non‑ferrous metals. Its 135° point angle and HSS‑G construction make it particularly effective when machining harder workpieces. Can the MetavCUT Twist Drill be used in a handheld drill or is it made for machines? The MetavCUT Twist Drill is specified for use in a Drilling Machine for best results; while it can be fitted to powerful hand drills, performance and service life are maximised in stationary equipment with proper clamping and coolant. For what is a Twist Drill used? The Twist Drill is mainly applied when machining high‑strength materials and larger bore diameters. Its shape allows straightforward re‑grinding and it withstands higher loads, making it suitable for demanding metalwork. Which three types of drill are there? There are three common drill categories: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills point sharpened? Point sharpening reduces the cross‑cut at the tip of the Twist Drill, which lowers friction and therefore reduces the required feed force; it also improves the drill’s centring in the workpiece for more accurate holes. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and surface finish are usually inferior compared to purpose‑made wood drills; metal bits are easier to re‑sharpen and typically show less self‑feeding. For which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard choice for through holes and solid material drilling. For diameters up to 20 mm and depths up to 100 mm a Twist Drill is often the preferred tool. Is HSS or HSSE better for my application? The idea that HSSE is categorically superior to HSS is not universally correct. Evaluate whether your working conditions justify the higher cost of HSSE; for many applications a well‑made HSS‑G Twist Drill from MetavCUT offers an excellent balance of performance and economy. If you are unsure whether this Twist Drill meets your exact requirements or need additional technical data, METAV Werkzeuge offers comprehensive, competent advice — contact us at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.

Twist Drill — HSS‑G extra long Twist Drill, 7.5 mm, 135° tip, bright finished, fully ground shank, DIN 1869 The Twist Drill extra long HSS‑G is a specialist drill for Drilling Machine applications, engineered for deep and demanding metal drilling tasks. Extra long design for deep hole access 135° tip for harder materials and quick entry HSS‑G ground geometry for precise, clean holes Fully ground shank for high concentricity Suited for drilling in alloyed and unalloyed steels Deep drilling reach for confined or deep workpieces The Extra Long configuration and an overall length of 225 mm combined with a spiral length of 155 mm allow access to deep or hard‑to‑reach drill positions, so fewer tool changes are required. This design makes it easier to create long, straight holes in components where standard lengths fall short. For users who need extended reach during maintenance, workshop or production drilling, the extended geometry increases flexibility without sacrificing control. Faster cutting with ground HSS‑G geometry and reduced feed forces The HSS‑G material and CNC ground flutes deliver sharp cutting edges and excellent roundness, which translate into up to 40% faster drilling and roughly 50% lower feed force compared with conventional HSS types under comparable conditions. This benefit reduces operator effort and can improve cycle times in repetitive machining tasks. The ground construction also produces cleaner chips and more accurate hole diameters, which is especially advantageous for subsequent reaming or finishing operations. Optimised for harder metals and machine use A 135° tip angle is selected to perform reliably in harder materials such as stainless steels and tempered steels; the larger tip angle shortens the initial plunge time and improves centring on difficult surfaces. The MetavCUT Twist Drill is specified to meet DIN 1869 and is particularly recommended for use in Drilling Machines with adequate cooling. As the ground variant can be more brittle than rolled types, machine mounting and coolant are advised to maximise tool life and avoid breakage under heavy loads. Clear benefits for workshops, maintenance and production Customers in metalworking, toolrooms and industrial maintenance gain from consistent hole quality and reduced rework. The combination of bright finished surface and fully ground shank improves clamping stability and runout, which benefits hole accuracy and tool longevity. For users requiring reliable deep-hole machining with predictable results, this HSS‑G Twist Drill by MetavCUT offers a balance of precision and reach while conforming to recognised standards. MetavCUT Twist Drill recommended for demanding deep metal drilling — for individual technical advice METAV Werkzeuge provides competent support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 32075-FDA Diameter: 7.5 mm Tip angle: 135° Material: HSS‑G Execution: Extra long Spiral length: 155 mm Overall length: 225 mm Shank finish: Fully ground Colour: Bright finished Intended for: Drilling for metal / Drilling Machine Standard: DIN 1869 Applications: Alloyed and unalloyed steel, cast iron, non‑ferrous metals, hard plastics Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for and where does it perform best? The MetavCUT Twist Drill is primarily used for drilling metal and is optimised for deep holes and tougher materials; it performs best in machine applications such as Drilling Machines where the extra length and HSS‑G ground geometry enable precise, deep bore creation in alloyed and unalloyed steels, cast materials and hard plastics. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drills group and is designed for metalworking tasks. Why are Twist Drills point‑ground? The point grinding reduces the cross‑cut at the tip, lowering friction and therefore requiring less feed force; this improves centring in the workpiece and reduces the risk of wandering, which is a key reason the MetavCUT Twist Drill is ground for high‑precision metal drilling. Can a metal drill be used for wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are usually inferior compared with purpose‑made wood drills; metal drills are easier to resharpen and have less aggressive self‑feed, so results can be acceptable for non‑critical wooden jobs. At which depths is the Twist Drill most commonly used? For solid drilling, Twist Drills are typical up to diameters of about 20 mm and depths up to 100 mm; the MetavCUT Extra Long variant is intended for deeper or harder‑to‑access hole requirements where standard lengths would be insufficient. What is better, HSS or HSSE? There is no universal rule that HSSE is always superior to HSS; the choice depends on working conditions, material and cost considerations. Evaluate whether the specific machining demands justify the higher investment in HSSE for your application.

Twist Drill — Extra long HSS‑G 7.5 mm, 135° Point, Bright Finished (DIN 1869) by MetavCUT The Twist Drill is an extra‑long HSS‑G drill designed for deep metal drilling in a Drilling Machine and for demanding machining tasks. Extra‑long design for deep drilling HSS‑G material for high precision metalwork 135° point angle for harder materials Fully ground shank for accurate runout Conforms to DIN 1869 for industrial use Durable HSS‑G construction for precision and life The Twist Drill is manufactured from HSS‑G (ground high‑speed steel), which provides high cutting performance and precise hole quality in metalworking. Ground flutes create very sharp cutting edges and superior concentricity, resulting in cleaner holes and lower vibration. This construction suits applications where drilling accuracy matters and supports stable tool behaviour under machining loads. Extra‑long geometry for deep and hard-to-reach holes With an extra‑long overall length and an extended spiral length, this twist drill enables reliable drilling in deep bores and in situations where access is limited. The longer geometry reduces the need for extensions or special setups, allowing deeper penetration while maintaining chip evacuation. For deep drilling, pair the tool with appropriate cooling to reduce thermal stress and prolong tool life. Point geometry optimised for harder materials A 135° point angle is specified to improve centring and reduce chipping when working with harder metals such as alloyed steels and cast materials. The flatter tip reduces initial cutting forces and helps maintain tool life under higher contact stresses. This geometry is especially suitable when accuracy and clean entry holes are required in tough workpiece materials. Application range and recommended use This twist drill is intended primarily for Drills for metal, including alloyed and unalloyed steel, cast steel, cast iron and certain engineering plastics. The fully ground shank ensures low runout when used in standard drilling machines. For best results, operate with appropriate coolant, moderate feed rates and stable clamping. Where mobility is required, ensure correct speeds and support to avoid breakage. Who benefits from this tool Engineers, toolroom technicians and maintenance professionals who need a reliable solution for deep, precise metal holes will benefit from the Twist Drill’s combination of extra length, ground geometry and robust HSS‑G material. The tool is suitable for both production environments and repair operations where hole quality and repeatability are priorities. For demanding deep‑hole metal machining choose MetavCUT’s Twist Drill for consistent performance — METAV Werkzeuge offers expert advice and support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 33075-FDA Diameter: 7.5 mm Point angle: 135° Execution: Extra long Colour: Bright finished Material: HSS‑G Standard: DIN 1869 Spiral (Flute) length: 200 mm Overall length: 290 mm Shank finish: Fully ground For use in: Drilling Machine Application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill be used on? The MetavCUT Twist Drill is designed for a wide range of metals; it performs well in alloyed and unalloyed steels, cast steel, cast iron and some hard plastics thanks to its HSS‑G material and 135° point geometry. Is the MetavCUT Twist Drill suitable for deep boring in production? Yes, the MetavCUT Twist Drill’s extra‑long design and DIN 1869 compliant flute geometry make it suitable for deep bore applications in production environments when used with proper cooling and stable clamping. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high‑strength materials and larger diameters. Its design is straightforward to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? There are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are twist drills pointed (regrinded)? Pointing reduces the secondary cutting edge at the tip, which lowers friction and required feed forces while improving centring of the drill in the workpiece. Can a metal twist drill be used to drill wood? A metal twist drill can be used in wood but typically has poorer guidance and a less clean finish; however, such drills are easier to resharpen and exhibit less self‑feed. For which depths is the twist drill most commonly used? Solid drilling is often performed with twist drills. For diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most commonly used tool. Is HSS or HSSE better for my needs? The common belief that HSSE is always superior to HSS is not universally correct. Assess whether your working conditions justify the higher cost of HSSE before selecting the tool.

Twist Drill (Drill Bit) — MetavCUT Extra Long HSS‑G, 7.5 mm, 135° Point Angle, Bright Finished, Fully Ground, DIN 1869 The Twist Drill by MetavCUT is an extra‑long HSS‑G drill bit designed for deep metal drilling in drilling machines, combining increased reach with precise, ground geometry for reliable industrial use. Extra‑long design for deep hole drilling HSS‑G material for higher cutting performance 135° Point Angle optimized for hard metals Fully ground shank for excellent concentricity Conforms to DIN 1869 for demanding conditions Engineered reach and reliability for deep drilling This extra‑long Twist Drill delivers extended reach where standard lengths fall short. The increased Overall Length and Spiral Length make it suitable for deep Holes and hard‑to‑access bore positions, reducing the need for extensions or special fixtures. Because the Flute Geometry is produced by CNC grinding, the bit offers consistently sharp cutting edges and improved chip evacuation, which helps maintain cutting performance over longer penetrations and under higher loads. Ground geometry for precise, clean holes The Fully Ground HSS‑G construction results in very accurate concentricity and sharp cutting lips, producing cleaner bores in metal. A 135° Point Angle reduces walking and spreads cutting forces for tougher materials such as alloyed and unalloyed steels. For users, this means fewer re‑drills, better hole quality and improved fitment for subsequent assembly operations. Use with appropriate coolant and steady feed to avoid brittle breakage tendencies common to ground HSS tools. Material choice and what it means for performance Constructed from HSS‑G, this bit balances hardness and wear resistance with the grindability required for precision tools. HSS‑G is particularly suited to metalworking tasks—casting, steel, sintered materials and certain plastics—where a sharp, ground flute profile improves hole finish. For those less familiar: HSS‑G indicates a High Speed Steel tool that has been ground (G) rather than roll‑formed, giving superior edge geometry and surface finish at the expense of slightly higher brittleness. Recommended use cases and handling advice Best results are achieved when the bit is used in a suitable Drilling Machine with stable clamping, controlled feed and coolant. The extra length is designed for deep bores up to substantial depths while preserving accuracy; avoid excessive side loads and use reduced speeds for very hard materials. When regrinding is necessary, the ground geometry allows relatively simple resharpening, but caution is advised to maintain the correct Point Angle and lip geometry to preserve centring and cutting behaviour. Who benefits from this tool and why This tool is aimed at professional workshops and industrial fabricators who require reliable deep drilling in metals. The combination of DIN 1869 compliance, fully ground shank and extra‑long design makes it a practical choice for machinists tackling components with recessed or hard‑to‑reach bore locations. For users seeking cleaner holes and consistent tool life in challenging materials, the HSS‑G extra‑long design provides a measurable advantage. Strong recommendation: For demanding metalworking applications choose the MetavCUT extra‑long HSS‑G Twist Drill for superior reach and hole quality — METAV Werkzeuge offers comprehensive expert advice and technical support by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 if additional data or application guidance is required Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 34075-FDA Diameter: 7.5 mm Overall Length: 370 mm Spiral Length: 250 mm Point Angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: Extra long Finish: Bright finished Shank: Fully ground Model Series: Standard Line Suitable For: Drilling Machine Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (drill bit) is primarily used for drilling in metal; it is especially effective on alloyed and unalloyed steel, cast iron, sintered metals, temper cast and non‑ferrous metals, as well as hard plastics where a precise bore is required. Which three main drill types exist? The primary drill categories are metal drills, wood drills and stone/concrete drills, covering the typical material families and tool geometries needed for different substrates. For what purpose are twist drills mainly used? Twist Drills are mainly applied to machining high‑strength materials and larger drill diameters; their form is easy to regrind and they withstand higher loads while maintaining hole quality. Why are twist drills pointed (what is the purpose of the point)? Pointing reduces the secondary cutting edge at the tip; by resharpening the point, friction is lowered, which reduces required feed forces and improves centring of the tip in the workpiece for more accurate starts. Can the MetavCUT Twist Drill be used to drill wood? A metal‑grade twist drill can be used in wood, but guidance and surface finish are generally inferior compared with dedicated wood bits. The metal bit is easier to resharpen and has lower self‑feeding tendency. At which drilling depths is the twist drill most commonly used? Solid hole drilling is typically performed with a twist drill. For diameters up to about 20 mm and depths up to around 100 mm, the twist drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE is always superior to HSS is not universally true. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your application.

Twist Drill — Extra-long HSS‑G 7 mm, 135° point, bright‑finished, fully‑ground shank, DIN 1869 (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill designed for deep metal drilling with a Drilling Machine, offering precise performance for demanding workshop and industrial applications. Extra‑long design for deep bores HSS‑G material for high cutting performance 135° point angle for harder materials Fully ground shank for high concentricity DIN 1869 specification for deep‑hole drilling Durable HSS construction for reliable metal cutting The HSS‑G material and CNC ground flute geometry deliver a robust combination of hardness and sharpness that makes the Twist Drill ideal for metalworking. Ground manufacturing creates very sharp cutting edges and excellent Runout Accuracy, so holes are cleaner and reaming effort is reduced. Because ground drills can be comparatively brittle, the drill performs best under machine conditions and with appropriate Coolant to extend tool life. Designed for deep, precise boreholes in tough materials With an overall length of 225 mm and a spiral length of 155 mm, this extra‑long twist drill reaches deep workpieces where standard lengths cannot. The 7 mm diameter combined with a 135° point angle improves entry in harder steels and stainless materials, reducing the risk of wandering at the start of the bore. Conformity to DIN 1869 ensures suitability for deep‑hole conditions and industrial standards, enabling consistent results in production environments. Best used in machine setups for professional results This twist drill is optimised for use with a Drilling Machine rather than handheld use, thanks to its fully‑ground shank and precision geometry. Professionals in fabrication, maintenance and toolrooms will benefit from faster penetration and lower feed forces—features that support efficient workshop workflows. For stationary drilling rigs or press machines, the drill’s geometry allows better centring and repeatable hole quality. Faster drilling and lower operator effort Testing and manufacturer guidance show that the ground HSS design can enable up to 40% faster drilling and require about 50% less thrust than conventional rolled HSS tools in comparable conditions. That translates into reduced machine load and less operator fatigue during repetitive work. Keep in mind that the extra‑long geometry is specifically targeted at deep or hard‑to‑reach bores and performs best with steady clamping and adequate lubrication. We recommend the MetavCUT extra‑long Twist Drill for professionals needing precise deep metal bores; for personalised technical advice and application support contact METAV Werkzeuge via email, phone or WhatsApp — expert consultation is available to ensure the right tool choice and safe handling 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 32070-FDA Diameter: 7 mm Point Angle: 135° Execution / Type: Extra long Colour: Bright finished Overall Length: 225 mm Spiral Length: 155 mm Shank Execution: Fully ground Material: HSS‑G Standard / Norm: DIN 1869 Application: Drills for metal, for Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining high‑strength metals and larger drill diameters; its extra‑long design and ground geometry make it suitable for deep bore operations and difficult‑to‑access drilling tasks in professional metalworking. Which three drill types are commonly distinguished? The three main drill types are Metal drills, Wood drills, and Masonry/Concrete drills, where the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications.

Twist Drill — Extra Long Drill Bit (7 mm, 135°) HSS‑G, Bright Finished, DIN 1869 — MetavCUT A Twist Drill extra long HSS‑G drill bit for Drilling Machines, designed for deep metal drilling and precise holemaking. 7 mm diameter for precision metalwork Extra long design for deep bore applications Fully ground shank for high concentricity HSS‑G material for hard metals and longevity 135° tip angle reduces walking in tough materials Faster deep drilling thanks to extra long design The extra long overall length delivers the reach required for deep drilling tasks without the need to reposition workpieces, making the bit ideal for access-restricted setups. Made from HSS‑G, this Twist Drill combines hardness with a ground geometry that produces clean, precise holes in steel and cast materials; the CNC grinding process yields sharp cutting edges and high runout accuracy, which shortens machining time and improves repeatability. Reliable penetration in hard materials with 135° tip A 135° tip angle provides a more gradual cutting action suited to harder alloys and stainless steels, lowering the risk of chipping at the entry and improving centering when starting a hole. This geometry reduces the need for pilot operations in many cases and helps maintain edge life under elevated contact stresses, so fewer tool changes are necessary during a job. Clean chips and better cooling for extended tool life The deep spiral flute (spiral length 200 mm) evacuates swarf efficiently from deep bores, while the bright finished surface supports smoother chip flow and easier cleaning. When used with appropriate coolant and a stable setup on a Drilling Machine, the combination of flute geometry and fully ground shank minimizes heat build-up and supports longer service intervals for the cutting edge. Precise guidance and handling in production environments The fully ground shank (fully ground) ensures excellent concentricity and stable clamping, reducing vibration and improving surface quality of the bore. Consciously engineered to DIN 1869 tolerances, this Twist Drill is suited for workshop and production use where consistent hole quality and interchangeability are required. Who benefits from this drill and how to use it Designed primarily for machining professionals and maintenance technicians working with legierter and unlegierter steels, cast iron and non‑ferrous metals, this bit excels where deep, accurate holes are required. For best results, secure the workpiece, use a stable Drill Machine setting, apply suitable coolant, and avoid excessive feed to prevent brittle fracture typical of ground HSS tools. METAV CUT recommends this Twist Drill for demanding deep metal drilling tasks; for personalised technical advice or to verify suitability for a specific application, METAV Werkzeuge offers expert consultation — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 33070-FDA Diameter: 7 mm Overall length: 290 mm Spiral length: 200 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Finish: Bright finished Shank execution: Fully ground Execution: Extra long For: Drilling Machine Model series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT best used for? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger drill diameters; its extra long configuration and HSS‑G grade make it well suited for deep holes in legierte and unlegierter steel, cast iron and hard plastics, providing clean, precise bores under demanding conditions. Can the MetavCUT Twist Drill be used with a regular drilling machine? Yes, this MetavCUT Twist Drill is designed for use in a Drilling Machine; for optimal performance secure the bit in a precise chuck, apply appropriate coolant and moderate feed rates to exploit the ground geometry and avoid undue stress on the cutting edge. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their shape makes them easy to sharpen and capable of withstanding significant loads. Which three drill types exist? There are three common categories: metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑cut at the tip, lowering friction and thus the required feed forces; it also improves centring at the start of the hole, giving better guidance and less wander. Can metal Twist Drills be used to drill wood? Metal Twist Drills can be used in wood, but they generally offer less guidance and a less clean finish than dedicated wood drills; however, they are easier to resharpen and exhibit less self‑feeding tendency. At what drilling depths are Twist Drills most commonly used? Twist Drills are the go‑to tool for through drilling in solid materials; they are most frequently used for diameters up to about 20 mm and depths up to around 100 mm. Is HSS or HSSE better? The common assumption that HSSE is categorically superior to HSS is not universally true; when choosing, assess whether your working conditions justify the higher cost of HSSE for improved wear resistance in specific applications.

Spiralbohrer für Metall, 7 mm, 135°, HSS-G, extra lang, blank, DIN 1869 Der Spiralbohrer in 7 mm ist ein extra langer HSS-G-Bohrer für tiefe Metallbohrungen mit geschliffener Schaftausführung und optimiertem Spitzenwinkel für harte Werkstoffe. Extra lange Ausführung für tiefe Bohrungen Geschliffen für hohe Rundlaufgenauigkeit DIN 1869 mit Tieflochspirale für Metall HSS-G Material für legierten und unlegierten Stahl 135° Spitzenwinkel ideal für härtere Werkstoffe Schnelle, kraftsparende Bohrleistung bei Metallen Dank der geschliffenen Geometrie erzielt der Bohrer deutlich schärfere Schneidkanten und eine konstante Bohrleistung. Die HSS-G-Legierung ermöglicht ein bis zu 40 % schnelleres Eindringen bei gleichzeitig etwa 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Ausführungen. Bei Einsatz in Baustahl, Guss oder Hartkunststoff sorgt die 135°-Spitze für reduziertes Auslaufen und saubere Bohrlöcher, was die Nachbearbeitung minimiert und die Fertigungszeit senkt. Extra Länge und sichere Spanabfuhr für tiefe Bohrungen Mit einer Gesamtlänge von 370 mm und einer Spirallänge von 250 mm ist diese Ausführung speziell für tiefe Bohrungen konzipiert. Die Tieflochspirale nach DIN 1869 gewährleistet verbesserte Spanabfuhr auch unter erschwerten Bedingungen, wodurch Verblockungen reduziert werden. Für den Einsatz mit Handbohrmaschine ist die Ausführung geeignet; für besonders lange oder hochbelastete Bohrungen empfiehlt sich der stationäre Betrieb und die Nutzung von Kühlschmierstoff, um die Standzeit zu maximieren. Für Werkstattprofis und Instandhaltung konzipiert Diese Ausführung spricht Anwender in der Metallbearbeitung, Maschineninstandhaltung und im professionellen Handwerk an, die tiefe, präzise Bohrungen benötigen. Der Bohrer ist besonders geeignet für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl und Nichteisenmetalle. Die Kombination aus geschliffenem Schaft und HSS-G-Material stellt eine wirtschaftliche Lösung dar, wenn Präzision und Bohrgeschwindigkeit im Vordergrund stehen. Anwendungstipps für präzise Ergebnisse und lange Lebensdauer Vor dem Bohren empfiehlt sich Anpunkten, um das Abwandern des Bohrers zu vermeiden, und die Verwendung moderater Schnittgeschwindigkeiten bei härteren Werkstoffen. Bei längeren Einsätzen sorgt kontinuierliche Kühlung für geringere thermische Belastung; aufgrund der geschliffenen Ausführung ist erhöhte Vorsicht bei Stößen geboten, da die Sprödigkeit die Bruchgefahr erhöht. Ersatzweise kann bei sehr harten Serienmaterialien auf Vollhartmetalllösungen ausgewichen werden. Empfehlung: Für tiefe Metallbohrungen die extra lange, geschliffene HSS-G-Ausführung von MetavCUT wählen — bei Unsicherheiten oder Bedarf an ergänzenden technischen Daten berät METAV Werkzeuge gerne per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 34070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: extra lang Farbe: blank Schaftausführung: geschliffen Norm: DIN 1869 Spirallänge: 250 mm Gesamtlänge: 370 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der MetavCUT Spiralbohrer für Metall mit 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl geeignet; bei Edelstahl empfiehlt sich reduzierte Schnittgeschwindigkeit und Kühlung, um bestmögliche Standzeiten zu erreichen. Kann ich den Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwenden? Ja, der Spiralbohrer von MetavCUT in 7 mm ist für den Einsatz mit Handbohrmaschine geeignet; für besonders tiefe oder anspruchsvolle Bohrungen wird jedoch stationäre Aufnahme und Kühlung empfohlen, um Bruchrisiken zu minimieren. Warum ist der geschliffene Schaft beim MetavCUT Spiralbohrer vorteilhaft? Die geschliffene Schaftausführung beim MetavCUT Spiralbohrer sorgt für höhere Rundlaufgenauigkeit und schärfere Schneidkanten, was präzisere Bohrlöcher und sauberere Oberflächen ermöglicht; dabei erhöht sich jedoch die Vorsicht bei Stoßeinwirkungen. Für welche Materialien ist der MetavCUT Spiralbohrer primär ausgelegt? Der MetavCUT Spiralbohrer eignet sich primär für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; bei sehr zähen Materialien sollte auf spezialisierte Kühlung oder andere Werkstofflösungen geachtet werden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#34070-FDA","sku":"34070-FDA","mpn":"34070-FDA","name":"Spiralbohrer 7 mm 135° HSS-G extra lang blank","description":"Extra langer Spiralbohrer 7 mm, HSS-G, 135° Spitzenwinkel, geschliffener Schaft, Tieflochspirale nach DIN 1869, geeignet für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl, Nichteisenmetalle und Hartkunststoffe; konzipiert für tiefe Metallbohrungen und reproduzierbare Spanabfuhr.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"7 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Spirallänge","value":"250 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"370 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm von MetavCUT mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe wie Edelstahl; bei Edelstahl werden reduzierte Schnittgeschwindigkeit und Kühlung empfohlen, um die Standzeit zu verbessern."}},{"@type":"Question","name":"Kann ich den Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm von MetavCUT ist für den Einsatz mit einer Handbohrmaschine geeignet; für sehr tiefe oder anspruchsvolle Bohrungen empfiehlt sich jedoch eine stationäre Aufnahme und Kühlung."}},{"@type":"Question","name":"Warum ist der geschliffene Schaft beim MetavCUT Spiralbohrer vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Schaftausführung des MetavCUT Spiralbohrers sorgt für hohe Rundlaufgenauigkeit und schärfere Schneidkanten, was präzisere Bohrlöcher und sauberere Oberflächen ermöglicht; zugleich erfordert die geschliffene Ausführung erhöhte Vorsicht bei Stößen."}},{"@type":"Question","name":"Für welche Materialien ist der MetavCUT Spiralbohrer primär ausgelegt?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 7 mm ist primär ausgelegt für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl, Gusseisen, Nichteisenmetalle und Hartkunststoffe; bei sehr zähen Materialien sollte spezialisierte Kühlung oder alternative Werkstofflösungen in Betracht gezogen werden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-34070-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer für tiefe Metallbohrungen"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"DIN 1869 Tieflochspirale"},{"@type":"Thing","name":"Extra lange Ausführung"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"Tieflochspirale DIN 1869"},{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"135° Spitzenwinkel"}]}]}

Spiralbohrer HSS‑G 8,5 mm, Spitzenwinkel 135°, extra lang, blank, DIN 1869 von MetavCUT Der Spiralbohrer ist ein extra langer HSS‑G‑Bohrer für tiefe Metallbohrungen, geeignet für legierte und unlegierte Stähle sowie Gusswerkstoffe. HSS‑G geschliffener Bohrer für Metall extra lange Ausführung für tiefe Bohrungen Spitzenwinkel 135° für härtere Werkstoffe DIN 1869 Tieflochspirale für effiziente Spanabfuhr Geeignet für Handbohrmaschine und stationäre Maschinennutzung Schnelleres Bohren bei geringerem Kraftaufwand Der geschliffene HSS‑G‑Schliff sorgt für sehr scharfe Schneiden, die ein bis zu 40 % schnelleres Bohren ermöglichen und zugleich 50 % weniger Anpresskraft erfordern. Dieser Vorteil reduziert Ermüdung bei wiederholten Bohrvorgängen und erhöht die Effizienz in der Werkstatt. Anwender profitieren von kürzeren Bearbeitungszeiten und weniger Nachbearbeitung, besonders bei Serienarbeiten und längeren Bohrzyklen. Präzise Bohrbilder und saubere Spanabfuhr bei harten Werkstoffen Mit einem Spitzenwinkel 135° dringt der Bohrer leichter in härtere Werkstoffe ein und vermeidet Aufplatzen an der Einlaufkante. Die DIN 1869‑Tieflochspirale unterstützt die Spanabfuhr auch bei extra tiefen Löchern, was saubere, maßhaltige Bohrbilder fördert. Bei geschliffenen Schneiden entsteht eine höhere Rundlaufgenauigkeit; der Begriff geschliffen bedeutet hier, dass die Geometrie durch CNC‑Schleifen erzeugt wurde und nicht durch Walzen. Entwickelt für tiefe Bohrungen und schwer erreichbare Stellen Die extra lang ausgeführte Bauform mit einer Gesamtlänge von 240 mm und einer Spirallänge von 165 mm ermöglicht das Erreichen tiefer Bohrstellen ohne Zwischenaufbohren. Diese Länge ist besonders sinnvoll bei tieferen Durchführungen oder wenn die Aufnahme weit vom Werkstück entfernt liegt. Bei sehr tiefen Löchern empfiehlt sich das stufenweise Bohren und regelmäßiges Entfernen der Späne, um Verstopfungen zu vermeiden. Empfohlenes Einsatzspektrum und Werkstoffverträglichkeit Der Bohrer eignet sich ausdrücklich für legierte und unlegierte Stahlarten, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Für Edelstahl oder hochlegierte Werkstoffe ist die Kombination aus angepasster Schnittgeschwindigkeit und Kühlung entscheidend. Bei stationärer Anwendung mit Kühlschmierstoff erhöht sich die Standzeit; in Handbetrieb sind moderate Drehzahlen und kontrollierter Vorschub ratsam. Sicherheit, Handhabung und Pflege für längere Lebensdauer Für eine sichere Anwendung empfiehlt sich eine Anbohrung zur Zentrierung bei anspruchsvollen Passungen, regelmäßige Kühlung und das Vermeiden von seitlicher Belastung, da geschliffene Werkzeuge empfindlicher gegenüber Kippbelastungen sind. Bei richtiger Anwendung trägt die präzise Geometrie zu weniger Gratbildung und geringerer Nachbearbeitung bei. Der Bohrer ist besonders für stehende Maschinensysteme und kraftvolle Akkubohrschrauber mit stabiler Aufnahme prädestiniert. Vertrauen Sie auf die Präzision der MetavCUT Standard Line mit HSS‑G und DIN 1869; für fachliche Beratung und technische Fragen steht METAV Werkzeuge gern zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 32085-FDA Durchmesser: 8,5 mm Material: HSS‑G Spitzenwinkel: 135° Ausführung: extra lang Farbe: blank Gesamtlänge: 240 mm Spirallänge: 165 mm Schaft Ausführung: geschliffen Norm: DIN 1869 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (HSS‑G Bohrer) kann für Edelstahl eingesetzt werden, empfiehlt aber eine angepasste Schnittgeschwindigkeit und konsequente Kühlung, damit die Standzeit erhalten bleibt. Kann ich den Spiralbohrer von MetavCUT in einer Handbohrmaschine verwenden? Der Spiralbohrer von MetavCUT ist für die Nutzung mit einer Handbohrmaschine geeignet, solange die Maschine ausreichend Leistung liefert und Kippbelastungen vermieden werden. Warum ist die Ausführung „extra lang“ bei diesem Spiralbohrer wichtig? Die extra lange Ausführung des Spiralbohrers von MetavCUT erlaubt das Erreichen tiefer Bohrstellen ohne Zwischenaufbohren und erleichtert Bohrungen an schwer zugänglichen Stellen. Wie unterscheiden sich geschliffene HSS‑G‑Bohrer wie dieser von gewalzten Bohrern? Geschliffene HSS‑G‑Bohrer von MetavCUT bieten schärfere Kanten und bessere Rundlaufgenauigkeit, sind jedoch empfindlicher gegen Kippbelastung und profitieren von stationärem Einsatz und Kühlung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#32085-FDA","sku":"32085-FDA","mpn":"32085-FDA","gtin13":"","name":"Spiralbohrer 8,5 mm HSS-G extra lang","description":"Extra langer Spiralbohrer HSS-G 8,5 mm, Spitzenwinkel 135°, geschliffen, blank, DIN 1869; entwickelt für tiefe Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen; bietet hohe Rundlaufgenauigkeit und effiziente Spanabfuhr durch Tieflochspirale.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,5 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"240 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"165 mm"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Vorteile","value":"Tieflochspirale nach DIN 1869 für effiziente Spanabfuhr; geschliffene Geometrie für hohe Rundlaufgenauigkeit"},{"@type":"PropertyValue","name":"Hinweis","value":"Für Edelstahl angepasste Schnittgeschwindigkeit und Kühlung empfehlen"},{"@type":"PropertyValue","name":"Preis Netto","value":"13.5 EUR"},{"@type":"PropertyValue","name":"uid","value":"32085-FDA"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT HSS-G 8,5 mm kann für Edelstahl eingesetzt werden; empfohlen werden jedoch angepasste Schnittgeschwindigkeit und konsequente Kühlung, um die Standzeit zu erhalten."}},{"@type":"Question","name":"Kann ich den Spiralbohrer von MetavCUT in einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT ist für die Nutzung mit einer Handbohrmaschine geeignet, sofern die Maschine ausreichend Leistung liefert und Kippbelastungen vermieden werden."}},{"@type":"Question","name":"Warum ist die Ausführung extra lang bei diesem Spiralbohrer wichtig?","acceptedAnswer":{"@type":"Answer","text":"Die extra lange Ausführung des Spiralbohrers von MetavCUT ermöglicht das Erreichen tiefer Bohrstellen ohne Zwischenaufbohren und erleichtert Arbeiten an schwer zugänglichen Stellen."}},{"@type":"Question","name":"Wie unterscheiden sich geschliffene HSS-G-Bohrer wie dieser von gewalzten Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Geschliffene HSS-G-Bohrer von MetavCUT haben sehr scharfe Kanten und bessere Rundlaufgenauigkeit, da die Geometrie CNC-geschliffen ist; sie sind jedoch empfindlicher gegen Kippbelastung und profitieren von stationärem Einsatz und Kühlung."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Tieflochspirale DIN 1869"},{"@type":"Thing","name":"HSS-G geschliffen"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"Tieflochspirale DIN 1869"},{"@type":"Thing","name":"Geschliffene Schaftausführung"},{"@type":"Thing","name":"Spitzenwinkel 135°"}]}]}

Twist Drill 8.5 mm HSS-G (Extra Long, 135°) — bright finished, fully ground, DIN 1869 by MetavCUT The Twist Drill 8.5 mm HSS-G is an extra-long metal drill designed for deep, high-precision holes in demanding materials for Drilling Machines. Extra-long length for deep, hard-to-reach holes HSS-G material for precise metal drilling 135° point angle for harder materials like stainless steel Fully ground shank for high concentricity DIN 1869 compliant with 305 mm overall length Outstanding Performance through Material and Geometry The extra-long HSS-G construction combines high cutting performance with improved hole quality. Thanks to the fully ground flute geometry, the bit achieves very sharp cutting edges and excellent run-out accuracy, which reduces wobble and delivers cleaner holes in alloys and cast materials. This design also means lower required feed force compared with roll-formed equivalents, so machining becomes more efficient and precise. Ideal for Deep and Difficult Metal Drilling Engineered specifically for deep drilling, the extended Spiral Length (210 mm) and Overall Length (305 mm) enable work in recessed or hard-to-reach areas where standard lengths fail. The 135° point angle reduces entry forces and improves centring in tougher metals, making the tool well suited for applications in alloyed and unalloyed steel, cast steel, cast iron and other non-ferrous metals. For production or repair work that demands depth and accuracy, this bit keeps processes reliable. Practical Machining Advice and Terminology Explained For safe and efficient use, employ appropriate coolant and moderate cutting speeds when machining harder alloys. The term HSS-G denotes High-Speed Steel, ground (HSS-G), meaning the flute geometry is ground rather than rolled—this yields sharper cutting edges and superior concentricity but can be more brittle, so stationary setups or rigid chucks and cooling are recommended. The 135° tip is chosen to shorten the initial boring time and to suit harder materials; a larger point angle typically reduces the tendency to grab and improves surface finish. Who Benefits Most from This Tool Production shops, tool rooms and maintenance teams facing deep-metal drilling tasks gain immediate advantages from the extra reach and precision. The bit is aimed at professionals who require consistent hole quality in challenging materials and those who value reduced rework. Its compliance with DIN 1869 ensures predictable performance in industrial environments, while the bright finished surface aids in chip evacuation and corrosion resistance during storage. MetavCUT recommends this extra-long HSS-G Twist Drill for demanding deep-hole metalwork; for technical advice or to confirm suitability for a specific application contact METAV Werkzeuge — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Precise Technical Specifications for Setup Designation: Twist Drill Marke: MetavCUT SKU: 33085-FDA Diameter: 8.5 mm Material: HSS-G Point Angle: 135° Overall Length: 305 mm Spiral Length: 210 mm Execution: extra long Finish/Colour: bright finished Shank Execution: fully ground Norm: DIN 1869 Model Series: Standard Line Application: Bohrer für Metall / Drills for metal For Drilling Machine: Handbohrmaschine / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT suitable for? The Twist Drill from MetavCUT (Twist Drill / Drill for Metal) is designed for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non-ferrous metals and hard plastics; its HSS-G composition and 135° tip support drilling in tougher metals with improved hole quality. How does the extra-long design affect drilling performance with the MetavCUT Twist Drill? An extra-long Twist Drill by MetavCUT lets operators reach recessed bores and deep workpieces that standard lengths cannot access; it maintains chip evacuation over longer depths but requires rigid fixturing and proper cooling to avoid breakage and to preserve concentricity. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high-strength materials and larger hole diameters; it is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks and deep-hole operations. Which three drill types exist? The three main drill types are Metal drills, Wood drills, and Masonry/Concrete drills.

Twist Drill (Drill for Metal) — 8.5 mm, 135° Point Angle, HSS‑G, Extra Long, Bright Finished, Fully Ground Shank, DIN 1869 The Twist Drill from MetavCUT is a precision Drill for Metal designed for deep, accurate holes in hard materials using a fully ground HSS‑G geometry. Extra long for deep and hard-to-reach holes HSS‑G ground design for clean, precise holes 135° point for easier entry in hard materials Fully ground shank for secure chuck grip Compliant with DIN 1869 for deep drilling High-precision geometry for cleaner holes and faster drilling The extra-sharp HSS‑G material and CNC-ground flute geometry deliver consistently precise results when machining steels and non-ferrous metals. This design produces sharp cutting edges and excellent roundness, which means cleaner holes and less rework. Thanks to the optimised geometry, users can achieve up to 40% faster drilling and require up to 50% less feed force compared with conventional HSS bits, reducing operator fatigue and machine load. Built for deep drilling — reliable chip evacuation and stability With an overall length of 390 mm and a spiral length of 265 mm, this Extra Long configuration is intended for deep bore applications where standard lengths fall short. The DIN 1869 specification and the deep-spiral flute aid in effective chip evacuation under extended cutting conditions, lowering the risk of clogging and improving hole quality in deep stacks or confined workpieces. Suitable for demanding metalworking tasks and machine setups The MetavCUT Twist Drill is targeted at machinists, toolroom technicians and maintenance professionals who require robust performance in legated and unlegated steels, cast iron and hard plastics. The Fully Ground Shank ensures accurate clamping and concentricity in chucks and toolholders, while the bright finished surface supports smooth insertion and corrosion resistance during storage. Best practices for longevity and performance To maximise life and performance, operate the bit with appropriate speeds and feeds for the specific metal and use coolant or cutting lubrication for sustained duty cycles; this is especially important given the ground geometry’s brittleness compared with rolled designs. The 135° point angle reduces walking and shortens piercing time in harder alloys such as stainless steel. For optimal results, prefer stationary or well-supported drilling setups and avoid abrupt lateral loads. MetavCUT recommends this Twist Drill for deep, precise metalworking tasks — for tailored technical advice or application support contact METAV Werkzeuge by e-mail at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Designation: Twist Drill Marke: MetavCUT SKU: 34085-FDA Diameter: 8.5 mm Point Angle: 135° Execution: Extra Long Finish/Colour: Bright Finished Material: HSS‑G Standard: DIN 1869 Spiral Length: 265 mm Overall Length: 390 mm Shank Execution: Fully Ground Application: Drills for Metal Model Series: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (Drill for Metal) is primarily used for machining high-strength materials and larger diameters where durability and precision are required. Its ground HSS‑G geometry is well suited to drilling in alloyed and unalloyed steels, cast iron and hard plastics, and it performs reliably in deep-hole situations. Which three drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is designed specifically for metalworking applications. What is a Twist Drill used for? A Twist Drill is mainly applied when working with high‑strength materials and larger bore diameters. Its ground form allows precise sharpening, and it withstands higher loads, making it suitable for drilling alloys, cast steels and hard plastics.

Twist Drill — Extra Long HSS‑G Drill (Ø 8 mm, 135° Tip, Bright Finished, Fully Ground Shank, DIN 1869) A Twist Drill designed for deep metal drilling in Drilling Machines, offering an extra long length and a 135° tip for reliable penetration. Ø 8 mm for precise hole diameters Extra Long design for deep or hard‑to‑reach holes HSS‑G material for high wear resistance 135° tip angle for harder materials Fully Ground shank for high runout accuracy Exceptional deep‑hole performance for demanding metalwork This extra long HSS‑G Twist Drill is engineered to reach depths that standard drills cannot. The extended overall length and increased spiral length allow clean chip evacuation during deep drilling, reducing the need to retract frequently. As a result, the tool achieves efficient progress in tasks such as structural steel or thick plate drilling, where depth and steady feed are crucial. The DIN 1869 compliance guarantees suitable geometry for deeper holes under challenging conditions. Faster cutting with lower feed forces thanks to precision grinding A fully ground geometry and CNC‑refined flutes give the bit a sharp profile that cuts more efficiently. The ground design enables up to 40% faster drilling and requires significantly less axial force compared with rolled HSS bits, which is particularly beneficial for handheld or smaller drilling machines where operator control matters. The 135° Tip improves centring and reduces walking on hard substrates, helping to produce cleaner bores with less rework. Robust material choice and targeted applications Made from HSS‑G, this Twist Drill is suited for alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron, non‑ferrous metals and hard plastics. The material selection balances hardness and toughness for high performance in metalworking. For stationary drilling with coolant and controlled feeds the bit excels; note that ground drills can be more brittle, so proper clamping and cooling extend tool life and maintain hole quality. Designed for accuracy and machine compatibility The bright finished surface and fully ground shank ensure consistent clamping and minimal runout, supporting precise machining outcomes. The geometry tailored by the DIN 1869 standard promotes repeatable centring and stability in common Drilling Machines. Users seeking clean, concentric holes with reduced radial deviation will benefit from the bit's tight manufacturing tolerances and sharp cutting edges. Strongly recommended: Choose the MetavCUT Twist Drill for deep metal drilling and contact METAV Werkzeuge for expert technical advice — Email info@metav‑werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 32080‑FDA Diameter: 8 mm Tip Angle: 135° Execution / Type: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS‑G Standard: DIN 1869 Spiral Length: 165 mm Overall Length: 240 mm Application: Drills for metal For Machine Type: Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for The MetavCUT Twist Drill is intended primarily for metals such as alloyed and unalloyed steel, cast steel and grey cast iron; it is also usable in non‑ferrous metals and hard plastics, delivering accurate holes when used with appropriate coolant and feed rates. How should the MetavCUT Twist Drill be used to maximise tool life For best results with the MetavCUT Twist Drill, use steady feeds, adequate clamping and cutting fluid for heat removal; the ground HSS‑G geometry cuts efficiently but benefits from controlled machining conditions to avoid chipping. For what is a Twist Drill used A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. This form is easy to regrind and withstands higher loads while enabling deep, precise holes under demanding conditions. Which three drill types exist There are three main drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills pointed Pointing reduces the cross‑cut at the tip. By re‑pointing, friction forces are significantly lowered so that less feed force is required and the tip centres more reliably in the workpiece. Can a Twist Drill be used for wood A metal Twist Drill can be used in wood but offers poorer guidance and a less clean finish; however, these drills are easier to regrind and have less aggressive self‑feeding than specialised wood bits. At which depths is the Twist Drill most used A through hole in solid material is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool.

Twist Drill — 8 mm, 135° Point Angle, Extra Long, Bright Finished, HSS-G (DIN 1869) by MetavCUT The Twist Drill is an extra long Twist Drill designed for deep metal drilling with a 135° point angle for use in Drilling Machines. 8 mm Diameter for precise metal drilling Extra-Long Design for deep or hard-to-reach holes 135° Point Angle for harder materials HSS-G Fully Ground for fast, accurate cuts DIN 1869 Standard for deep-hole drilling reliability Drill Deeper with Consistent Precision The Twist Drill Extra-Long construction provides an extended Overall Length of 305 mm and a Spiral Length of 210 mm, enabling reliable Deep Drilling where standard tools fall short. This geometry is especially useful when access is limited or when holes must be made from a greater distance; the Longer Reach reduces the need for extensions and preserves alignment. The 8 mm Diameter maintains good rigidity while allowing fine control, so each hole stays true and Repeatable even at depth. Built for Hard Materials and Stable Entry Equipped with a 135° Point Angle, this Twist Drill penetrates harder materials with reduced walking and improved centring. The HSS-G Material and CNC grinding process create very sharp cutting edges and high Roundness Accuracy, producing clean bore surfaces in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron and Non-Ferrous Metals. Note that the ground geometry offers excellent precision but requires appropriate coolant and often stationary or guided use to avoid brittle breakage. Faster Drilling with Lower Feed Forces The Fully Ground flute geometry of this Drill allows up to 40% faster drilling and can require up to 50% less feed force compared with conventional rolled HSS designs. This reduction in Thrust improves operator comfort and extends tool life under the right conditions. Conforming to DIN 1869, the deep-spiral form supports effective chip evacuation during long bores and reduces the risk of chip packing that can stall the cut. Reliable Choice for Workshop and Production Use Designed for use in Hand Drills and Drilling Machines, the MetavCUT Extra-Long Twist Drill suits workshop environments and stationary machines where repeatability and reach matter. Professionals who machine thicker components or require access past fixtures will value the combination of Precision and Reach. The Standard Line modelling focuses on robust everyday performance and predictable results in series or single-part production. MetavCUT recommends this Twist Drill for demanding deep-hole metalworking tasks — for expert advice and to verify suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33080-FDA Diameter: 8 mm Point Angle: 135° Type / Execution: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS-G Standard: DIN 1869 Overall Length: 305 mm Spiral Length: 210 mm For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill is primarily applied for machining high-strength materials and larger bore diameters; it performs well in alloyed and unalloyed Steel, Cast Steel and Non-Ferrous Metals. Its ground spiral geometry is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? In general tool classification you will find Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for metalworking applications. Why are Twist Drills pointed? The pointing reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction and therefore the required feed force; this sharpening also improves centring of the tip in the workpiece for a more accurate start. Can a Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with wood-specific bits. Metal Drills are easier to resharpen and have less self-feeding action, so results in Wood are acceptable but not optimal. For which drilling depths is the Twist Drill most commonly used? A full-penetration bore is often executed with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm this type of tool is the most frequently used option for reliable deep-hole drilling. What is better, HSS or HSSE? The common assumption that HSSE steels are universally superior to HSS is not correct. When choosing, evaluate whether the specific work conditions justify the higher cost of HSSE; MetavCUT supplies HSS-G variants that balance performance and economy for many metalworking tasks.

Twist Drill — 8 mm, 135° Tip Angle, Extra Long • Bright Finished • HSS‑G • DIN 1869 The Twist Drill is an extra‑long HSS‑G metal drill for deep, precise holes with a Drilling Machine, optimised for hard materials and demanding shop use. Extra‑long design for deep drilling CNC‑ground HSS‑G for precise, clean holes 135° Tip Angle suited for hard materials Fully ground shank for excellent concentricity Consistent deep-hole performance for demanding metalwork The MetavCUT extra‑long design delivers reliable drilling when access is restricted or when through‑holes must be produced without multiple setups. With a Total Length 390 mm and a Spiral Length 265 mm, this twist drill enables drilling of extended depths while maintaining steady chip evacuation. The elongated geometry reduces the need for extensions or stepped drilling, which saves time in production and lowers fixture complexity. For machinists seeking reproducible deep holes, the geometry is designed to balance stiffness and Reach. Sharp geometry and material for hard, alloyed steels Made from HSS‑G and finished by CNC grinding, the bit combines toughness with cutting precision. The 135° Tip Angle reduces cutting forces in harder materials such as stainless and tempered steels, improving centring and lowering the risk of workpiece deformation. Grinding the Flutes produces a sharp cutting edge and high runout accuracy, which results in cleaner bores and more consistent hole tolerances. For operators less familiar with grind types: CNC grinding means the Flute geometry is cut rather than rolled, giving higher Dimensional Precision at the cost of slightly increased brittleness — therefore cooling and appropriate speeds are recommended. Recommended applications, handling and compatibility This metal drill is intended for drilling in legated and unlegated Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics under workshop conditions. It is optimised for use in a Drilling Machine and benefits from controlled speeds, steady feed and coolant for prolonged life. The Fully Ground Shank improves clamping concentricity in chucks, reducing runout and vibration. As a practical tip: when working deep, ensure adequate Chip Evacuation and periodic pecking or coolant supply to prevent clogging and premature wear. Choose the MetavCUT Twist Drill for demanding deep metal drilling — for technical advice or to check suitability for a specific application contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT Diameter: 8 mm Total Length: 390 mm Spiral Length: 265 mm Tip Angle: 135° Execution: Extra long Colour / Finish: Bright finished Shank: Fully ground Material: HSS‑G Standard: DIN 1869 Application: Drills for metal / for Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (metal Twist Drill) is primarily designed for machining high‑strength and alloyed steels and larger bore diameters; its extra‑long design and HSS‑G material make it suitable for deep holes and applications requiring precise hole geometry. Can the MetavCUT Twist Drill be used in a bench or handheld drill? The MetavCUT Twist Drill is optimised for use in a Drilling Machine; it can be used in powerful benchtop machines but, due to its length and ground construction, handheld use is not recommended for safety and accuracy reasons. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and large bore diameters. Its form allows relatively easy regrinding and it endures higher loads, making it suitable for tough metalworking tasks. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Masonry/Concrete Drill. Why are twist drills pointed? Pointing reduces the cross‑edge at the tip of the twist drill. By pointing, friction forces are significantly lowered so reduced feed forces are required, and the tip centres better in the workpiece. Can you drill wood with a metal twist drill? A metal drill can be used in wood, but guidance is poorer and hole quality is inferior. Metal bits are easier to regrind and have less self‑feed, so results may be acceptable for non‑critical wooden applications. At which drilling depths is the twist drill most used? Twist Drills are the standard tool for through holes and are most commonly used up to diameters of about 20 mm and drilling depths up to 100 mm; extra‑long variants extend that capability for deeper bores. Which is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is incorrect. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for the required application.