HSS-G Twist Drills DIN 338 – Type N, Short, Bright, 135° Split Point

Twist Drill — short, 12.6 mm, 135° tip, Type N, bright finished, HSS‑G, DIN 338 The Twist Drill short Type N 12.6 mm is engineered for precise metal drilling in demanding workshop and industrial applications, offering high stability and standardised performance. Short design for improved stability HSS‑G ground for sharp, precise holes 135° tip optimised for hard materials Fully ground shank for excellent runout accuracy Made to DIN 338 for standardised quality Exceptional stability and precise hole quality for metalworking The Twist Drill in a short execution is designed to reduce overhang and vibration, delivering higher stability and consistent results when drilling metal. The compact geometry shortens the exposed length from the chuck, which lowers the tendency to bend and improves centring at the start of a hole. This makes the tool especially suitable for precise operations on steel components where dimensional accuracy and surface finish matter. Faster cutting and lower feed forces thanks to HSS‑G grind A HSS‑G (ground High Speed Steel) geometry provides very sharp cutting edges and a clean flute profile, enabling up to 40% faster drilling and requiring less feed force compared with conventional HSS drills. The 135° tip reduces initial thrust and is better suited to tough or work‑hardened materials; it shortens dwell time on contact and improves chip formation for a cleaner bore. Engineered for metal and compatible with common drilling equipment This short Type N twist drill is intended primarily for metal drilling and is compatible with standard Drilling Machines, both stationary and portable, when used with appropriate clamping and coolant. The fully ground cylindrical shank ensures excellent runout characteristics for use in chucks and collets, while the DIN 338 conformity guarantees dimensional and manufacturing consistency for workshop scheduling and tool replacement. Who benefits from this tool and recommended use conditions Machinists, toolroom technicians and maintenance professionals who require reliable, repeatable holes in alloyed and unalloyed steels, castings and hard plastics will find this tool advantageous. For best performance, use with appropriate coolant and moderate spindle speeds for the given diameter, and prefer stationary or well‑supported setups to mitigate breakage risk inherent to very hard or brittle ground tools. Strong recommendation: Choose MetavCUT’s short HSS‑G Twist Drill Type N 12.6 mm for demanding metalwork — METAV Werkzeuge offers expert, personalised advice and technical support via email info@metav-werkzeuge.com, telephone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45126-FDA Diameter: 12.6 mm Total length: 151 mm Spiral length: 101 mm Tip angle: 135° Type: Type N Execution: short Colour: bright finished Shank design: fully ground Material: HSS‑G Standard: DIN 338 Application: Drills for metal For use in: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the Twist Drill (MetavCUT Type N) suitable for stainless steel? The MetavCUT Twist Drill Type N with a 135° tip and HSS‑G ground geometry is well suited for drilling harder materials including stainless steels; the larger tip angle reduces initial thrust and the ground cutting edges produce cleaner chips, though appropriate coolant and moderate speeds are recommended for optimal tool life. For what are Twist Drills used? Twist Drills are primarily applied to the machining of high‑strength materials and larger drill diameters; they are relatively simple to regrind and withstand higher loads, making them a common choice for metalworking and heavy‑duty bores. Which 3 drill types exist? There are three common drill types: Metal drills, Wood drills, and Masonry/Concrete drills.

Twist Drill — Short Type N, Diameter 12.7 mm, 135° Tip, Bright Finished, Short Execution, DIN 338, HSS‑G (MetavCUT) The Twist Drill short Type N is a precision metalworking bit designed for Drilling Machines, combining a short design with a 135° point angle for reliable performance in hard materials. Short design for increased stability HSS‑G ground for precise, clean holes 135° tip for harder materials and steel Fully ground shank for excellent concentricity Conforms to DIN 338 for short Twist Drills Faster, more efficient drilling in demanding metalwork The HSS‑G ground geometry of this short Twist Drill enables up to 40% faster drilling while requiring about 50% less feed force compared with conventional HSS bits. This translates into lower spindle load and shorter cycle times when working with alloyed and unalloyed Steel. The combination of short spiral length and reduced overhang increases Stability, reducing chatter and improving hole quality for precision assemblies. Built to cut hard materials with consistent accuracy A 135° Point Angle is specified to ease entry into tougher substrates such as Stainless Steel or tempered components, reducing the tendency to work‑harden at the hole edge. The Type N normal helix is optimised for metal cutting, making the bit suitable for Cast Steel, Gusseisen, Sintered Iron, non‑ferrous metals and hard plastics. The short overall length reduces deflection so that each drilled hole maintains concentricity and dimensional accuracy. Manufacturing quality: ground geometry and bright finish Being a short, fully ground Twist Drill manufactured in accordance with DIN 338, the flute geometry is produced by CNC grinding rather than rolling. This results in very sharp cutting edges and high runout accuracy, producing clean, burr‑reduced holes. The bright finished surface aids chip evacuation and visual inspection, while the fully ground shank supports excellent clamping and minimal runout in chucks and collets. Recommended applications and handling advice for best results This short Twist Drill from MetavCUT is intended primarily for use in stationary or portable Drilling Machines where rigidity and precision are required. For best life and hole quality, use appropriate cutting fluid and moderate speeds adapted to material. The shorter form is ideal for tight setups and for operations where deflection must be minimised. If unsure whether this Twist Drill meets specific project requirements, METAV Werkzeuge offers comprehensive technical advice and assistance. Strong recommendation: choose the MetavCUT short Twist Drill Type N for precision metalworking and contact METAV Werkzeuge for expert support — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Specifications Bezeichnung: Twist Drill Marke: MetavCUT Bezeichnung/Type: Type N Durchmesser: 12.7 mm Spitzenwinkel: 135° Ausführung: short Farbe: bright finished Material: HSS‑G Schaft Ausführung: fully ground Spirallänge: 101 mm Gesamtlänge: 151 mm Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Modellserie: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill is used mainly for machining high‑strength materials and larger hole diameters; its design allows relatively simple regrinding and it withstands high loads, making it suitable for demanding metalworking tasks. Which three drill types are there? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metalworking applications.

Spiralbohrer (Kurz, 12,8 mm, 135°, Typ N, Farbe: blank, Ausführung: kurz, Norm: DIN 338, Material: HSS-G) von MetavCUT Der Spiralbohrer Kurz mit Ø 12,8 mm ist ein geschliffener HSS-G Metallbohrer nach DIN 338 für präzise Bohrungen in Stahl und Guss mit hoher Stabilität. Kurzbauform für hohe Stabilität beim Bohren HSS-G geschliffen für präzise Bohrlöcher 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Norm DIN 338 für standardisierte Qualität Schnelleres Bohren bei reduziertem Kraftaufwand Der geschliffene HSS-G Schneidstoff sorgt für sehr scharfe Schneidkanten und eine hohe Schnittgüte. Durch die spezielle Geometrie und den CNC-Schliff ermöglicht der Bohrer ein um bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Werkzeugen. Diese Leistungswerte reduzieren die Bearbeitungszeit und schonen Maschine sowie Spannfutter, was insbesondere bei wiederholten Arbeitsgängen die Produktivität erhöht. Mehr Stabilität und präzisere Bohrlöcher dank kurzer Auskraglänge Die kurze Ausführung verringert die Auskragung aus dem Bohrfutter und erhöht dadurch die Stabilität während des Bohrens. Das Ergebnis sind rundere, maßhaltigere Bohrlöcher mit geringerem Wandversatz. Die geschliffene Fertigung trägt wesentlich zur Rundlaufgenauigkeit bei, weshalb sich dieses Werkzeug besonders für präzise Metallarbeiten eignet, bei denen saubere Passungen und Oberflächenqualität gefragt sind. Passend für typische Metallanwendungen und Maschinen Mit einem Durchmesser von 12,8 mm fällt der Bohrer in den Standard-Bereich und ist daher ideal für den Einsatz in Werkstatt, Montage und bei DIY-Projekten. Er ist sowohl für Handbohrmaschine als auch für stationäre Bohrmaschinen geeignet, wobei bei höheren Anforderungen an Tiefe oder Serienfertigung stationäre Bearbeitung mit geeigneter Kühlung empfohlen wird. Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe wie Edelstahl und reduziert Aufschneiden. Zielgruppe und besondere Merkmale für anspruchsvolle Anwender Der Bohrer richtet sich an Anwender im Maschinenbau, in der Instandhaltung und in der Metallverarbeitung, die Wert auf Präzision und lange Standzeiten legen. Die Kombination aus Typ N Normalspirale und geschliffenem Schaft bietet eine ausgewogene Mischung aus Spanraum und Schnittfestigkeit. Die Einhaltung der DIN 338 stellt sicher, dass das Werkzeug in standardisierte Prozesse und Spannsysteme integriert werden kann. Für präzise Metallbohrungen empfehlen wir den Einsatz des MetavCUT Spiralbohrers Kurz; bei technischen Fragen oder zur Auswahl der passenden Bohrparameter berät METAV Werkzeuge gern per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 45128-FDA Durchmesser: 12,8 mm Spitzenwinkel: 135° Typ: Typ N Farbe: blank Ausführung: kurz Material: HSS-G Schaft Ausführung: geschliffen Spirallänge: 101 mm Gesamtlänge: 151 mm Für Bohrmaschine: Handbohrmaschine Norm: DIN 338 Modellserie: Standard Line Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der MetavCUT Spiralbohrer mit 135° Spitzenwinkel und HSS-G-Material ist ausdrücklich für härtere Werkstoffe wie Edelstahl geeignet und erleichtert das Anbohren durch die flachere Spitze. Kann ich den Spiralbohrer Ø 12,8 mm in einer Handbohrmaschine verwenden? Ja, der MetavCUT Spiralbohrer Kurz wurde für den Einsatz mit Handbohrmaschine und stationären Maschinen konzipiert; bei Handbetrieb empfiehlt sich eine ruhige Führung und angemessene Drehzahl. Wie tief kann mit dem Spiralbohrer gebohrt werden? Bei der Verwendung des MetavCUT Spiralbohrers gilt die Praxis, dass sehr tiefe Löcher über das Fünffache des Durchmessers besondere Maßnahmen benötigen; für sehr tiefe Bohrungen wird ein mehrstufiges Aufbohren empfohlen. Brauche ich Kühlung bei der Bearbeitung mit dem Spiralbohrer? Für optimale Standzeit des MetavCUT Spiralbohrers und saubere Spanabfuhr wird bei zähen Materialien oder längeren Bohrungen Kühlung beziehungsweise Schmierstoff empfohlen; das verlängert die Lebensdauer und verbessert das Bohrergebnis. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#45128-FDA","sku":"45128-FDA","mpn":"45128-FDA","name":"Spiralbohrer 45128-FDA","description":"Kurzformiger geschliffener HSS-G Spiralbohrer Ø 12,8 mm, 135°-Spitzenwinkel, Typ N, Farbe: blank, Ausführung: kurz, Norm DIN 338; geeignet für präzise Metallbohrungen in Stahl, Guss und Nichteisenmetallen; geschliffener Schaft für hohe Rundlaufgenauigkeit und Stabilität.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"45128-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"12,8 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"101 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"151 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"5"},{"@type":"PropertyValue","name":"Preis Netto","value":"9.48 EUR"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"}],"manufacturer":{"@type":"Organization","name":"MetavCUT"}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer Ø 12,8 mm mit 135°-Spitzenwinkel und HSS-G eignet sich für härtere Werkstoffe wie Edelstahl und erleichtert das Anbohren durch die flachere Spitze."}},{"@type":"Question","name":"Kann ich den Spiralbohrer Ø 12,8 mm in einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer Kurz wurde für den Einsatz mit Handbohrmaschine und stationären Maschinen konzipiert; bei Handbetrieb empfiehlt sich eine ruhige Führung und angemessene Drehzahl."}},{"@type":"Question","name":"Wie tief kann mit dem Spiralbohrer gebohrt werden?","acceptedAnswer":{"@type":"Answer","text":"Für sehr tiefe Bohrungen über das Fünffache des Durchmessers sind besondere Maßnahmen nötig; für sehr tiefe Bohrungen mit dem MetavCUT Spiralbohrer wird mehrstufiges Aufbohren empfohlen."}},{"@type":"Question","name":"Brauche ich Kühlung bei der Bearbeitung mit dem Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Bei zähen Materialien oder längeren Bohrungen wird Kühlung beziehungsweise Schmierstoff empfohlen, um die Standzeit des MetavCUT Spiralbohrers zu erhöhen und die Spanabfuhr zu verbessern."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-45128-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"HSS-G geschliffen für Metall"},{"@type":"Thing","name":"Typ N Normalspirale"}],"mentions":[{"@type":"Thing","name":"Geeignet für Handbohrmaschine"},{"@type":"Thing","name":"Empfohlen bei Einsatz mit Kühlung bei zähen Materialien"},{"@type":"Thing","name":"Kurze Auskraglänge für erhöhte Stabilität"}]}]}

Twist Drill — Type N short HSS-G drill bit, Ø 12.9 mm, 135° tip, bright finished The Twist Drill Type N short variant for Drilling Machines designed for precise metalworking and hard materials such as steel Short Design improves Stability and Precision 135° Tip Angle suited for Harder Materials HSS-G Material for Clean, Accurate Metal Holes Fully Ground Shank for High Roundness and Grip Conforms to DIN 338 for Short Twist Drills Precise Material and Cutting Performance for Demanding Metalwork The short Twist Drill in HSS-G offers a clear advantage when machining metals: the short overall length reduces cantilever action and thus vibration, delivering a truer hole and longer tool life under appropriate conditions. Manufactured with a CNC grind on the flutes, this variant produces very sharp cutting edges and excellent radial runout. For operators working on alloyed and unalloyed steels, cast steel, cast iron and non-ferrous metals, the geometry and 135° tip angle shorten the initial centering phase and reduce burr formation when used with suitable coolant. Stability and Faster Drilling with Lower Thrust Short design yields measurable process benefits: reduced deflection allows higher feed rates and better surface finish with less risk of tool breakage during stationary or mobile machine operation. The fully ground shank improves concentricity in the chuck and enhances torque transmission. In many workshop applications this results in up to 40% faster drilling and noticeably lower required thrust compared with conventional HSS variants, making the tool particularly suitable for demanding, repetitive metal drilling tasks where consistency matters. Where this Tool Excels and How to Use It Engineered under DIN 338, this Type N short Twist Drill is optimized for drilling in tougher materials and for situations requiring precision rather than deep-hole capability. When used with appropriate clamping, correct spindle speed and cutting fluid, the bit delivers clean, cylindrical holes and extended edge life. The short flute length also simplifies tool handling and reduces the tendency to chatter, which benefits both manual Drilling Machines and light machining centres. Cooling is recommended for prolonged operations to avoid thermal softening. Recommended Users and Typical Applications Workshop professionals, maintenance technicians and precision fabricators benefit most from this short Twist Drill from MetavCUT, Standard Line. Its characteristics make it a reliable choice for production runs involving steel, cast materials and hard plastics, where repeatable accuracy and surface quality are priorities. The balanced combination of geometry and material allows use in both stationary and portable Drilling Machines provided adequate support and coolant are available. Strongly recommended: choose the MetavCUT Twist Drill Type N short HSS-G for demanding metal drilling tasks — for personalised technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 45129-FDA Type: Type N Diameter: 12.9 mm Tip Angle: 135° Material: HSS-G (ground) Execution: short Spiral Length: 101 mm Overall Length: 151 mm Shank Execution: fully ground Colour: bright finished For Drilling Machine: Drilling Machine Model Series: Standard Line Norm: DIN 338 Application: Drills for Metal Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best application for the Twist Drill Type N from MetavCUT? The MetavCUT Twist Drill Type N short is primarily intended for drilling Metal, especially suited to high-strength and harder materials; its short design improves Stability and Precision when used in stationary or portable Drilling Machines. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and larger hole diameters; it is easy to regrind and withstands higher loads while providing stable performance. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Stone/Concrete Drills, covering the typical material groups for most workshop applications.

Twist Drill — Type N, short HSS‑G 12 mm, 135° tip, bright finished (DIN 338) by MetavCUT The Twist Drill (Type N) is a short HSS‑G metal‑drilling bit designed for precise work in hard materials on a Drilling Machine. Short design for improved stability and precision Fully ground shank for high Runout accuracy 135° tip for better centring in hard metals Conforms to DIN 338 for standardized quality Bright finished surface for corrosion resistance and inspection Precision and speed through engineered geometry The HSS‑G construction and the short design deliver measurable advantages in metalworking. A shorter protruding length reduces bending and vibration, which directly improves hole quality and tool life. The fully ground flute geometry ensures sharp cutting edges and superior Runout Accuracy, while the specified 135° tip angle shortens plunge time in harder materials. For tasks that demand consistent hole geometry and minimal rework, this combination offers faster drilling with lower required feed force. Reliable performance in demanding metal applications Designed as a Type N normal spiral, the Twist Drill by MetavCUT is particularly suited to alloyed and unalloyed steels, cast steel, cast iron variants, sintered iron, and many non‑ferrous metals. The geometry supports effective chip evacuation during Through‑Drilling and contributes to clean, burr‑reduced holes. The 135° tip reduces the tendency to walk at start‑up and helps with centring when pre‑drilling is impractical, making it a solid choice for production or repair work on a Drilling Machine. Handling, sharpening and recommended use Because the flutes are produced by CNC grinding (HSS‑G), the bit achieves very sharp edges and high concentricity but can be more brittle than rolled alternatives; therefore, cutting fluids and appropriate speeds are recommended for stationary or guided drilling operations. The fully ground shank simplifies clamping and reduces slippage in the chuck. When reconditioning is needed, the ground geometry is easier to resharpen precisely, maintaining performance over multiple regrinds. Strong recommendation: For precision metalworking choose MetavCUT’s Twist Drill Type N to improve hole quality and machining efficiency — METAV Werkzeuge provides expert advice and technical support at info@metav-werkzeuge.com or by phone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45120-FDA Diameter: 12 mm Spiral Length: 101 mm Overall Length: 151 mm Tip Angle: 135° Type: Type N Execution: short Material: HSS-G Shank Finish: fully ground Colour/Surface: bright finished For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Norm: DIN 338 Packing Unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is used primarily for machining high‑strength materials and larger drill diameters; it is easy to resharpen and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? For general applications the common categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for ferrous and many non‑ferrous materials. Is the MetavCUT Twist Drill suitable for stainless steel? The MetavCUT Twist Drill Type N with a 135° tip is intended for harder materials and is appropriate for drilling stainless steel when used with recommended speeds, lubrication and a stable clamping setup.

Twist Drill — Type N, 13 mm, 135° Tip, Short, Bright Finished, HSS-G, DIN 338, Fully Ground Shank (MetavCUT Standard Line) The Short Twist Drill Type N is a precision HSS-G metal drilling bit designed for Drilling Machines to deliver high Stability and accurate holes in hard and alloyed steels. Short design for higher Stability and precision 13 mm diameter suited to metalworking 135° Tip angle for harder materials Fully ground shank for excellent concentricity Conforms to DIN 338 for standardised dimensions Consistent speed and measurable efficiency for metalworking Dank der kürzeren Ausführung bietet dieses Short Twist Drill aus HSS-G spürbar mehr Stabilität beim Bohren, was zu saubereren Bohrlöchern und reduzierter Vibration führt. Die geschliffene Geometrie sorgt für eine scharfe Schneide, die das Bohren in legierten und unlegierten Stählen sowie Gussmaterialien erleichtert. Durch den 135° Tip wird das Anbohren in harten Werkstoffen beschleunigt, wodurch die Schnittzeit sinkt und die Effizienz der Bearbeitung steigt. Precision geometry and material for reliable results Die voll geschliffene Schaftausführung erhöht die Rundlaufgenauigkeit und sorgt für eine gleichmässige Kraftübertragung vom Werkzeughalter in das Werkstück. Dadurch bleibt die Bohrung exakt, selbst bei anspruchsvollen Anwendungen auf stationären oder mobilen Maschinen. Das HSS-G Material kombiniert Härte und Schärfe, wodurch die Standzeit verbessert wird, während die kurze Auskraglänge das Risiko des Abknickens minimiert. Tailored for demanding metal applications and professional users Dieses Werkzeug richtet sich an Anwender, die Präzision und Stabilität beim Bohren von Metall benötigen, beispielsweise in Werkstätten, Instandhaltung oder Fertigung. Der Type N Spiralwinkel macht den Bohrer besonders geeignet für typische Metallaufgaben, während die Konstruktion nach DIN 338 klare Kompatibilität mit Standard-Schaftsystemen garantiert. Bei stationärer Anwendung mit adäquater Kühlung liefert dieses Bit dauerhaft präzise Ergebnisse. Strong recommendation: For precision metal drilling choose the MetavCUT Short HSS-G Twist Drill and contact METAV Werkzeuge for expert technical advice — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 45130-FDA Diameter: 13 mm Tip angle: 135° Type: Type N Execution: Short Material: HSS-G Shank execution: Fully ground Surface finish: Bright finished Spiral length: 101 mm Overall length: 151 mm For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is optimised for metalworking and performs particularly well in alloyed and unalloyed steel, cast steel, cast iron and other hard materials, delivering clean, precise holes when used with appropriate cooling. How does the Short HSS-G design affect drilling performance? A short HSS-G configuration reduces overhang and increases Stability, which improves Precision and reduces the tendency to bend. The ground geometry produces sharp cutting edges that speed up drilling and lower the required feed force. What is a Twist Drill typically used for? A Twist Drill is mainly applied to machining high-strength materials and larger hole diameters. Its shape is easy to regrind and it withstands greater loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? There are three main drill categories: metal drills, wood drills and stone/concrete drills.

MetavCUT Twist Drill (Spiralbohrer) — Type N, 3.6 mm, 135°, Short, Bright Finished, HSS‑G, DIN 338 The MetavCUT Twist Drill (Spiralbohrer) is a short, fully ground Type N drill bit designed for precision metalworking and stationary or portable drilling machines. Short, short design for higher stability Fully ground HSS‑G for clean, precise holes 135° tip optimized for hard materials Conforms to DIN 338 for short twist drills Bright finished shank for secure clamping Durable HSS‑G construction for metalworking efficiency The HSS‑G composition of this short twist drill combines high hardness with a ground geometry that produces clean, accurate holes in a range of metals. Because the flutes and cutting edges are produced by CNC grinding rather than rolling, the result is a sharp cutting edge and excellent runout accuracy, which reduces the need for rework. For operations in alloyed and unalloyed steel, cast steels and non‑ferrous metals, this material and finish deliver reliable performance and predictable tool life. Short length for greater rigidity and precision A reduced overall length and short flute length lower the unsupported overhang, increasing rigidity and reducing vibration during drilling. This design characteristic leads to improved hole quality and less tool deflection when machining harder materials. In practice, shorter drill geometry is particularly advantageous when using the drill in demanding machining tasks or in setups where concentricity and surface finish are critical. 135° tip and Type N spiral for hard materials The 135° tip angle of this twist drill reduces the initial tendency to wander and distributes cutting forces over a larger area, which is beneficial when penetrating tougher materials such as stainless steel. As a Type N (normal spiral) geometry, the flute pitch and helix are optimised for metalworking, offering a balance between chip evacuation and cutting stability. For users unfamiliar with tip geometry: a larger tip angle shortens the entry time and improves centring on hard workpieces. Fully ground shaft and bright finish for secure clamping The fully ground shank ensures consistent diameter and concentricity, making the tool easier to clamp securely in standard chucks and toolholders. The bright finished surface facilitates smooth insertion and removal while minimising corrosion during storage. Together these features enhance setup reliability and reduce downtime caused by tool slippage or misalignment. Applications and recommended use This short twist drill is intended primarily for metal drilling on both stationary and portable drilling machines. Typical applications include holes in alloyed and unalloyed steels, cast materials, sintered and tempered irons, non‑ferrous metals and hard plastics. Due to its ground geometry and material properties, the drill is best used with adequate coolant and in setups where rigidity can be maintained to avoid premature breakage. For technical advice or to verify if this MetavCUT Twist Drill matches specific machining conditions, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45036-FDA Type: Type N Diameter: 3.6 mm Tip angle: 135° Execution: Short Flute length: 39 mm Overall length: 70 mm Shank execution: Fully ground Material: HSS‑G Finish/Colour: Bright finished For drill machine: Drilling Machine (Hand Drill) Application: Drills for metal Standard/Norm: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the MetavCUT Twist Drill (Spiralbohrer) and where is it best applied? The MetavCUT Twist Drill (Spiralbohrer), a Type N short HSS‑G drill, is mainly applied for machining high‑strength materials and larger diameters in metalworking; its ground geometry makes it especially suitable for precise holes in alloyed and unalloyed steel, cast steel and other hard materials. Which three drill types exist and how does the MetavCUT Twist Drill relate to them? There are three main drill categories: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking rather than wood or stone applications.

Twist Drill (Spiralbohrer) — Short HSS-G Type N, 3.75 mm, 135°, Bright Finished, Fully Ground, DIN 338 — MetavCUT A Twist Drill (Spiralbohrer) Type N designed for Drilling Machine use, offering a short, rigid HSS-G construction for precise metalworking in hard materials. Short design for improved rigidity and accuracy HSS-G ground geometry for clean, precise holes 135° point angle suited to hard metals and stainless steel Fully ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Maximum Precision from Ground HSS for Demanding Metalworking The short HSS-G construction provides a significant increase in Stability compared with longer drills, reducing deflection and enabling more accurate hole placement. This ground variant produces very sharp cutting edges and high Roundness of the bore, which is particularly advantageous when machining alloys and tempered steels. The Type N spiral is the classic metalworking geometry, optimised for consistent chip removal and reliable centring in stationary drilling setups. Faster, Lower-Force Drilling with Reduced Wear Engineered to cut with less effort, the ground HSS geometry can deliver up to 40% faster drilling and requires markedly lower feed forces versus conventional HSS products. The 135° Point Angle decreases initial breakthrough stress on the workpiece and is therefore recommended for harder materials such as stainless steel and cast components. This combination reduces tool wear and supports longer life when used with appropriate cooling and feed rates. Ideal Applications and Target Users Designed for professional workshops and industrial users, this short Twist Drill excels in precision metal fabrication, maintenance and toolroom tasks. Suitable materials include alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals and hard plastics. The short overhang makes the tool particularly well suited to tasks requiring dimensional accuracy and minimal runout on drilling machines and dedicated fixtures. Handling, Regrinding and Machine Compatibility A ground HSS drill should be used primarily in stationary or rigidly supported drilling machines with appropriate coolant to avoid brittle failure. The fully ground shank ensures consistent chucking stability; regrinding is straightforward for experienced users, preserving cutting geometry. Conformity to DIN 338 ensures predictable dimensions and compatibility with standard toolholders and collets. For precision metalworking choose the MetavCUT Twist Drill — contact METAV Werkzeuge for tailored technical advice and support at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Detailed Specifications for Machine Compatibility Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 450375-FDA Type: Type N Diameter: 3.75 mm Overall Length: 70 mm Spiral Length: 39 mm Point Angle: 135° Execution: short Shank Finish: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Machine: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill (Spiralbohrer) Type N? The MetavCUT Twist Drill (Spiralbohrer) Type N is primarily used for machining high-strength materials and larger drill diameters; its short, ground design makes it ideal for precise work in alloyed and unalloyed steels, cast components and hard plastics, delivering clean holes and high runout accuracy. How should the MetavCUT Twist Drill be maintained for longest life? Regular use with suitable coolant and correct feed rates preserves the sharp HSS-G geometry of the MetavCUT Twist Drill; regrinding should be performed by trained personnel to maintain the original point angle and flute geometry for consistent drilling performance. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high-strength materials and for larger drill diameters; its geometry is easy to regrind and it withstands significant loads while providing reliable cutting behaviour. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills.

Twist Drill (Type N) — Short HSS‑G, 3.7 mm, 135° Tip, Bright Finished by MetavCUT A Twist Drill (Type N) for precision metal drilling, engineered as a short, bright finished HSS‑G tool for use in handheld Drilling Machines and stationary equipment. Short design for improved stability Ground HSS‑G for sharp edges and clean holes 135° tip for harder materials and reduced burrs Fully ground shank for precise concentricity Maximum precision and proven material technology for metalworking The short design combines a HSS‑G ground geometry with the stability benefits of reduced overhang, delivering more consistent concentricity and less deflection. Conforming to DIN 338, this construction provides sharp cutting edges and high runout accuracy; the ground flutes produce clean, burr‑reduced holes in demanding alloys. One direct advantage is faster drilling progress in hard materials compared with conventional rolled drills, making the tool suitable where repeatable precision is required. Best suited applications and machine compatibility Designed primarily as a metalworking tool, the short Type N geometry excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The 135° tip reduces initial cutting forces and improves centring in tougher workpieces, while the compact overall length and 39 mm spiral length lower vibration when used in handheld Drilling Machines or on stationary machines. This configuration supports precise hole placement and reduces the risk of wander on hard surfaces. Handling advice and operating recommendations for longer tool life A fully ground shank and precise flute geometry allow secure clamping and accurate runout; use of appropriate coolant and moderate cutting speeds extends tool life and mitigates brittleness inherent to ground HSS variants. The 70 mm overall length and short overhang favour operations with limited reach and high rigidity; where deep holes or interrupted cuts are required, ensure suitable pecking cycles and stable fixturing. If regrinding is needed, the ground form enables straightforward sharpening while maintaining the original cutting geometry. Choose the MetavCUT short HSS‑G Twist Drill for precise, stable metal drilling — for technical questions or personalised advice METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 45037-FDA Type: Type N Diameter: 3.7 mm Tip angle: 135° Material: HSS‑G Execution: short Colour / Finish: bright finished Shank finish: fully ground Spiral length: 39 mm Overall length: 70 mm Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (Type N) from MetavCUT? The MetavCUT Twist Drill (Type N) is mainly used for machining high‑strength materials and larger drill diameters; its ground geometry and short design make it particularly suitable for precise work in metals where clean holes and high accuracy are required. Which three drill types exist and where does the MetavCUT Twist Drill fit? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill is a metal drill optimised for steel and similar materials. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cutting edge at the point, which lowers friction and required feed forces; this improves centring and reduces the operator's effort when using the MetavCUT Twist Drill. Can metal drills be used in wood with the MetavCUT Twist Drill? Metal drills like the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with wood‑specific bits; however, metal drills are easier to re‑sharpen and show less aggressive self‑feed.

Spiralbohrer von MetavCUT — 3,8 mm, 135°, Typ N, blank, kurz, DIN 338, HSS-G Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS-G Bohrer für präzise Metallbearbeitung mit hoher Stabilität und sauberer Bohrbildgebung. Kurzbauweise für deutlich erhöhte Stabilität Geschliffen HSS-G für saubere, präzise Bohrlöcher 135° Spitzenwinkel reduziert Anbohrkraft bei Stahl DIN 338 Norm für kurze Spiralbohrer mit Zylinderschaft Typ N Normalspirale ideal für Metallbearbeitung Hohe Schnittleistung durch geschliffenes HSS-G Die Kurzspiralbohrerausführung mit HSS-G bietet eine scharfe Schneidkante und eine hohe Rundlaufgenauigkeit, wodurch besonders präzise Bohrungen in Stahl und Guss erzielt werden. Die geschliffene Fertigung sorgt für ein sauberes Spanbild und weniger Gratbildung, was die Nachbearbeitung reduziert. Dadurch profitiert die Fertigungsqualität, weil weniger Nacharbeit anfällt und die Einbauteile schneller montagebereit sind. Effizientes Bohren in harten Werkstoffen dank 135° Mit einem Spitzenwinkel 135° dringt der Bohrer kontrollierter in harte Werkstoffe ein, was die Anbohrkraft verringert und das Durchlaufen in legierten und unlegierten Stählen erleichtert. Die Typ N Normalspirale ist speziell für Metall ausgelegt und ermöglicht das effektive Abführen der Späne bei üblichen Bohrprozessen. Anwender erreichen so eine höhere Produktivität ohne übermäßigen Vorschubdruck. Passend für den Standardbereich: praxisnahe Einsatzempfehlung Mit einem Durchmesser von 3,8 mm fällt dieses Werkzeug in den Standard-Bereich für Alltagsanwendungen, wodurch sich der Bohrer hervorragend für Werkstatt, Montage und Handbohrmaschinen eignet. Bei hoher Maßhaltigkeit empfiehlt es sich, vorher mit einem Zentrierbohrer anzupunkten, um das Wandern zu minimieren und das Bohrbild weiter zu optimieren. Die kurze Auskraglänge erhöht die Stabilität und reduziert Vibrationen bei Hand- und Säulenmaschinen. Normkonforme Fertigung und Hinweise zur Anwendung Die Fertigung nach DIN 338 kennzeichnet die Ausführung als kurzen Spiralbohrer mit Zylinderschaft; die geschliffene Variante erzeugt sehr scharfe Kanten, kann jedoch empfindlicher gegen Aufprallbeanspruchung sein. Bei stationärem Bohren in harten Materialien empfiehlt sich die Verwendung von Kühlschmierstoff, um Temperaturbelastung und Verschleiß zu reduzieren. So bleibt die Standzeit hoch und die Werkzeugkosten pro gebohrtem Loch gering. Empfehlung: MetavCUT Kurzspiralbohrer in HSS-G für anspruchsvolle Metallbearbeitung wählen und bei Fragen die kompetente Beratung von METAV Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 in Anspruch nehmen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 45038-FDA Durchmesser: 3,8 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Ausführung: kurz Schaft Ausführung: geschliffen Material: HSS-G Spitzenwinkel: 135° Typ: Typ N Farbe: blank Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie tief kann mit dem MetavCUT Spiralbohrer sicher gebohrt werden? Der MetavCUT Spiralbohrer mit 3,8 mm Durchmesser ist für den Standard-Bereich ausgelegt; in der Praxis empfiehlt sich bei kritischen Toleranzen ein Anpunktieren mit einem Zentrierbohrer, um saubere, genau positionierte Bohrungen zu gewährleisten. Eignet sich der MetavCUT Spiralbohrer für Edelstahl? Der MetavCUT Spiralbohrer in HSS-G und mit 135° Spitzenwinkel ist für harte Werkstoffe wie legierten Stahl geeignet; bei Edelstahl sind geeignete Schnittwerte und Kühlung zu verwenden, um Standzeit und Bohrbild zu optimieren. Kann der MetavCUT Spiralbohrer in einer Handbohrmaschine verwendet werden? Ja, der MetavCUT Spiralbohrer wurde für den Einsatz im Standard-Bereich entwickelt und eignet sich für Handbohrmaschine; die kurze Ausführung reduziert Auslenkung und erhöht die Stabilität bei handgeführten Arbeiten. Was bedeutet die Bezeichnung HSS-G beim MetavCUT Spiralbohrer? HSS-G steht für Schnellarbeitsstahl geschliffen; beim MetavCUT Spiralbohrer sorgt diese Fertigungsart für sehr scharfe Kanten und eine hohe Rundlaufgenauigkeit, weshalb sie besonders für präzise Bohrungen in Metall empfohlen wird. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#45038-FDA","sku":"45038-FDA","mpn":"45038-FDA","name":"Spiralbohrer 45038-FDA","description":"Kurzspiralbohrer 3,8 mm, 135° Spitzenwinkel, Typ N, blank, kurz, DIN 338, HSS-G; geschliffener Zylinderschaft für präzise Metallbearbeitung und hohe Stabilität.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,8 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"70 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"39 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie tief kann mit dem MetavCUT Spiralbohrer sicher gebohrt werden?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 3,8 mm ist für den Standard‑Bereich ausgelegt; bei kritischen Toleranzen empfiehlt sich ein Anpunktieren mit einem Zentrierbohrer, um saubere, genau positionierte Bohrungen zu gewährleisten."}},{"@type":"Question","name":"Eignet sich der MetavCUT Spiralbohrer für Edelstahl?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 3,8 mm aus HSS‑G mit 135° Spitzenwinkel eignet sich für harte Werkstoffe wie legierten Stahl und Edelstahl; geeignete Schnittwerte und Kühlung sind zur Optimierung von Standzeit und Bohrbild zu verwenden."}},{"@type":"Question","name":"Kann der MetavCUT Spiralbohrer in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer 3,8 mm wurde für den Einsatz im Standard‑Bereich entwickelt und eignet sich für die Handbohrmaschine; die kurze Ausführung reduziert Auslenkung und erhöht die Stabilität bei handgeführten Arbeiten."}},{"@type":"Question","name":"Was bedeutet die Bezeichnung HSS‑G beim MetavCUT Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"HSS‑G steht für Schnellarbeitsstahl geschliffen; beim MetavCUT Spiralbohrer 3,8 mm sorgt diese Fertigungsart für sehr scharfe Kanten, hohe Rundlaufgenauigkeit und ein sauberes Spanbild, weshalb sie besonders für präzise Bohrungen in Metall empfohlen wird."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer"},{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"Metallbearbeitung: HSS‑G geschliffen"}],"mentions":[{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"135° Spitzenwinkel für harte Werkstoffe"},{"@type":"Thing","name":"Geschliffener Zylinderschaft"}]}]}

Spiralbohrer (Typ N) — MetavCUT Standard Line, 3,9 mm, 135°, blank, kurz, HSS-G, DIN 338 Der Spiralbohrer von MetavCUT ist ein kurzer HSS-G Bohrer (3,9 mm, 135°) nach DIN 338 für präzise Metallbohrungen in stationären und handgeführten Anlagen. Geschliffene HSS-G Ausführung für präzise Bohrlöcher 135° Spitzenwinkel reduziert Anbohrkraft bei Stahl Kurze Ausführung für hohe Stabilität Zylinderschaft nach DIN 338, passend für stationäre Maschinen Geeignet für Handbohrmaschine und stationäre Bohrer Schnelle, stabile Bohrungen durch kurze Bauform Die kurze Ausführung des Bohrers sorgt für eine deutlich geringere Auskraglänge, was die Stabilität erhöht und das Risiko von Verbiegen und Flattern minimiert. Bei einem Durchmesser von 3,9 mm und einer Spiralänge von 39 mm ermöglicht die kompakte Geometrie ein kontrolliertes Vorschubverhalten und saubere Bohrbilder selbst in legierten Stählen. Das Ergebnis sind präzise Bohrungen mit reproduzierbarer Qualität in der Werkstatt oder Fertigung. Material und Schleifgeometrie für saubere Ergebnisse Die HSS-G Ausführung steht für geschliffen gefertigte Spannuten, die sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit bieten. Im Vergleich zur rollgewalzten Variante ergibt sich durch das Schleifen eine bessere Schnittpräzision, wodurch saubere Bohrungsränder und geringe Gratbildung erzielt werden. Der Bohrer ist damit besonders geeignet für Anwendungen, bei denen Maßhaltigkeit und Oberflächenqualität im Vordergrund stehen. Geeignete Einsatzbereiche und Maschinentypen Mit einem Durchmesser von 3,9 mm gehört der Bohrer zum Standard-Bereich und eignet sich für allgemeine Werkstattarbeiten, Montage und DIY-Projekte. Die Werkstoffliste umfasst legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Dank des Zylinderschafts nach DIN 338 ist der Bohrer für den Einsatz in stationären Bohrmaschinen sowie für den Einsatz mit Handbohrmaschine geeignet, wobei bei hoher Präzision ein Anpunkten mit einem Zentrierbohrer empfohlen wird. Praktische Hinweise für effizientes Bohren in Metall Für optimale Ergebnisse empfiehlt sich der Einsatz von Kühlschmierstoff und angepasster Drehzahl, speziell bei härteren Werkstoffen. Der 135° Spitzenwinkel reduziert die Anbohrkraft und verbessert den Zentrumsstand bei Edelstahl und gehärteten Stählen. Direkteres Bohren ist im Standardbereich möglich; für sehr tiefe Bohrungen oder hohe Präzisionsanforderungen sollten mehrstufige Verfahren und regelmäßige Spanabfuhr berücksichtigt werden, um Wärmeaufbau und Werkzeugverschleiß zu minimieren. Empfohlen wird der Einsatz des MetavCUT Spiralbohrer Standard Line für präzise Metallbearbeitung — für individuelle Beratung und technische Angaben kontaktieren Sie bitte METAV Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, alternativ WhatsApp +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 45039-FDA Durchmesser: 3,9 mm Spitzenwinkel: 135° Typ: Typ N Farbe: blank Ausführung: kurz Material: HSS-G Schaft Ausführung: geschliffen Spiralänge: 39 mm Gesamtlänge: 70 mm Norm: DIN 338 Modellserie: Standard Line Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Werkstoffe kann der Spiralbohrer von MetavCUT bearbeiten? Der Spiralbohrer von MetavCUT (Typ N, HSS-G) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; bei härteren Materialien sollten Drehzahl und Kühlschmierstoff angepasst werden. Ist der Spiralbohrer von MetavCUT für Handbohrmaschinen geeignet? Ja, der MetavCUT Spiralbohrer mit Zylinderschaft nach DIN 338 kann sowohl in Handbohrmaschine als auch in stationären Bohrmaschinen eingesetzt werden; bei hoher Präzision empfiehlt sich vorheriges Anpunkten. Warum ist die geschliffene HSS-G Ausführung vorteilhaft? Geschliffene HSS-G Bohrer von MetavCUT bieten sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was saubere Bohrbilder und Maßhaltigkeit fördert; für stationäre Anwendungen mit Kühlung ist diese Ausführung besonders geeignet. Wann ist der 135° Spitzenwinkel des MetavCUT Spiralbohrers empfehlenswert? Der 135° Spitzenwinkel reduziert die Anbohrkraft und verbessert das Eindringen in harte Werkstoffe wie Edelstahl; er ist besonders empfehlenswert, wenn kraftsparendes Anbohren und zentrumsstabiler Start gefragt sind. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#45039-FDA","sku":"45039-FDA","mpn":"45039-FDA","name":"Spiralbohrer 45039-FDA","description":"Spiralbohrer Typ N, MetavCUT Standard Line; Kurze Ausführung, Durchmesser 3,9 mm, Spitzenwinkel 135°, blank, HSS-G, geschliffener Zylinderschaft nach DIN 338; Entwickelt für präzise Metallbohrungen in Handbohrmaschine und stationären Maschinen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,9 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"39 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"70 mm"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Preis Netto","value":"0.83 EUR"},{"@type":"PropertyValue","name":"UID","value":"45039-FDA"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Werkstoffe kann der Spiralbohrer von MetavCUT bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT Typ N (HSS-G, kurz) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; bei härteren Werkstoffen empfiehlt sich angepasste Drehzahl und Kühlschmierstoff."}},{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer mit Zylinderschaft nach DIN 338 kann in Handbohrmaschine und in stationären Bohrmaschinen eingesetzt werden; für hohe Präzision vorab Anpunkten mit Zentrierbohrer empfohlen."}},{"@type":"Question","name":"Welche Vorteile bietet die geschliffene HSS-G Ausführung?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene HSS-G Ausführung liefert sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was saubere Bohrbilder und geringe Gratbildung ergibt; ideal bei stationärer Anwendung mit Kühlung."}},{"@type":"Question","name":"Wann ist der 135° Spitzenwinkel des MetavCUT Spiralbohrers empfehlenswert?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel reduziert die Anbohrkraft und verbessert den Zentrumsstand, besonders geeignet für harte Werkstoffe wie Edelstahl und gehärtete Stähle; er erleichtert kraftsparendes Anbohren."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/dino-lite-mikroskop-am4117mztw","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"Kurze Ausführung für höhere Stabilität"}],"mentions":[{"@type":"Thing","name":"DIN 338"},{"@type":"Thing","name":"HSS-G geschliffene Ausführung"},{"@type":"Thing","name":"Typ N Normalspirale"}]}]}

Twist Drill (Type N) — Short HSS‑G, 4.1 mm, 135°, Bright Finished, DIN 338 by MetavCUT A Twist Drill (Type N) in short execution for precise metal drilling with a 4.1 mm diameter and a 135° point angle, suited for use in Drilling Machines and Hand Drills. Short execution for increased stability and precision Fully ground shank for high concentricity 135° point angle optimised for hard materials Conforms to DIN 338 for short HSS twist drills Outstanding drilling performance and faster cycle times The short Twist Drill in HSS‑G combines a reduced overhang with a ground flute geometry to deliver high stability and precision when machining metal. Shorter projection reduces the tendency to deflect, which translates into cleaner holes and longer tool life under comparable conditions. The ground design provides very sharp cutting edges and excellent runout accuracy, enabling up to 40% faster drilling speeds and requiring up to 50% less feed force compared with conventional HSS versions when used with suitable machining parameters. Robust geometry for demanding materials With a 135° point angle and the classical Type N spiral, this drill is optimised for harder materials such as stainless and alloyed steels. The larger point angle shortens the initial entry phase, improving centring and reducing chatter on tough surfaces. The fully ground shank and CNC‑ground flutes ensure consistently accurate centring and repeatable hole quality, making it ideal for precision metalworking tasks in production and repair environments. Practical design for workshop and machine use Designed to the DIN 338 standard for short twist drills with cylindrical shank, this tool is intended primarily for stationary or mobile machine applications where high concentricity is required. The short length and bright finished surface facilitate handling and inspection, while the overall length of 75 mm and spiral length of 43 mm suit common drilling depths without unnecessary flex. The Type N geometry focuses on metalworking, not soft woods or masonry. Who benefits from this Twist Drill Engineers, maintenance technicians and metalworkers who demand precise, repeatable holes in alloys and steels will value the combination of HSS‑G material and short design. The drill is particularly useful where tool rigidity matters—small bores in hardened or cast materials and jobs on bench drills or portable drilling machines where minimising deflection improves final part quality. For tasks requiring high surface finish and tight tolerances, this drill provides reliable performance. For applications requiring expert advice on suitability, tolerances or recommended machining parameters, Metav Werkzeuge offers comprehensive technical support — contact via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 We recommend the MetavCUT Twist Drill Type N for precision metalworking where stability and repeatable hole quality are essential — for tailored technical guidance contact METAV Werkzeuge. Twist Drill (Bezeichnung): Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45041-FDA Type: Type N Diameter: 4.1 mm Point angle: 135° Execution: Short (kurz) Colour / Finish: Bright Finished (blank) Shank design: Fully Ground (geschliffen) Spiral length: 43 mm Overall length: 75 mm Material: HSS‑G Standard / Norm: DIN 338 Application: Drills for metal (Bohrer für Metall) Model series: Standard Line Intended machine: Drilling Machine / Hand Drill (Handbohrmaschine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger hole diameters; its ground geometry makes it easy to regrind and it withstands higher loads, which suits it for demanding metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is designed specifically for steels and similar materials. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, lowering friction and the required feed forces while improving centring of the drill in the workpiece for the MetavCUT Twist Drill (Type N). Can a metal Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and surface quality are inferior compared with dedicated wood drills; however, metal drills are easier to regrind and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill; for diameters up to about 20 mm and depths up to 100 mm the Twist Drill is the most frequently used tool, including the MetavCUT short HSS‑G versions. Is HSS or HSSE better for my application? The notion that HSSE is always superior to HSS is not universally true; evaluate working conditions and material specifics before choosing, and consult Metav Werkzeuge for tailored advice on whether the MetavCUT HSS‑G Twist Drill is appropriate.

Twist Drill — Type N short HSS‑G drill, Ø 4.25 mm, 135° tip, bright finished The Twist Drill Type N is a short, fully ground HSS‑G drill engineered for precise metalworking tasks in drilling machines and hand drills. Short design for higher stability and precision HSS‑G ground geometry for clean metal holes 135° tip for harder materials like stainless steel Fully ground shank for accurate runout Conforms to DIN 338 for short twist drills Precision and strength for demanding metalworking The Twist Drill from MetavCUT combines a HSS‑G ground geometry with a 135° point to deliver reliable performance when drilling harder metals. Because the flutes and cutting geometry are produced by CNC grinding, the result is sharp cutting lips and a high runout accuracy, which leads to cleaner holes and reduced burr formation. This short version reduces overhang and therefore vibration, so the user benefits from improved centring and longer tool life when paired with adequate cooling. Stable holes through reduced overhang and robust shank A shorter overall length means less deflection and better feed control, particularly when working on alloyed and unalloyed steel, cast steel, and non‑ferrous metals. The fully ground shank ensures accurate clamping and minimal eccentricity in the chuck, which supports consistent hole quality. Use in stationary or portable drilling machines profits from the increased stiffness, making the drill a good choice for workshop setups where precision matters. Who gains most from this compact design Metalworkers, maintenance technicians and toolroom operators will appreciate the combination of a short flute length and Type N normal spiral for typical metal drilling tasks. The drill was designed to excel where stable, repeatable holes are required rather than for deep through‑holes. For users needing quick, accurate spot drilling and finishing holes in tougher materials, this design reduces rework and improves process reliability. Practical guidance and material recommendations To maximise performance, operate the drill with appropriate cutting fluid and moderate speeds for the workpiece material. The 135° point reduces chipping on entry and shortens the start time on hard metals; however, for very soft materials consider a different point geometry. The designation DIN 338 indicates this is a short cylindrical‑shank twist drill series; ground types like this (often marked HSS‑G) are easier to re‑sharpen but can be more brittle than rolled variants, so avoid excessive side loads and use cooling where possible. Highly recommended for precision metalwork: choose the MetavCUT Twist Drill Type N with HSS‑G ground geometry and consult METAV Werkzeuge for tailored technical advice — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 450425-FDA Diameter: 4.25 mm Total Length: 75 mm Spiral Length: 43 mm Point Angle: 135° Type: Type N Execution: short Colour: bright finished For Drilling Machine: Drilling Machine Shank Execution: fully ground Model Series: Standard Line Material: HSS-G Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N by MetavCUT used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters in metalworking. Its short design and ground geometry make it suitable for precise metal drilling tasks where stable, clean holes are required. Which three drill types exist? Common drill categories are metal drills, wood drills and masonry/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill group designed for ferrous and non‑ferrous metals. Why are twist drills pointed? The point on a twist drill reduces the size of the chisel edge at the tip, lowering friction and therefore the required feed force; this improves centring and reduces the tendency for the drill to wander in the workpiece. Can a metal twist drill be used for wood? A metal‑type drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with dedicated wood drills; however, metal drills are easier to re‑sharpen and have lower self‑feed tendencies.

Twist Drill — Type N, 4.2 mm, 135° point angle, short, bright finished, HSS‑G, DIN 338 The Twist Drill Type N is a short HSS‑G metal drill designed for precision drilling in demanding materials with a 135° point angle and a fully ground shank for high concentricity. Short design for improved stability HSS‑G geometry for precise metalworking 135° point angle for hard material entry Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Precision Material and Cutting Performance The short HSS‑G construction of this twist drill combines sharp cutting edges with material hardness optimised for metalworking. A ground flute geometry results in clean holes and high roundness, while the shorter overhang reduces vibration and bending. For users working with alloyed and unalloyed steel, cast steel, spheroidal graphite iron, non‑ferrous metals and hard plastics, this design translates into higher drilling speed and reduced feed force compared with conventional HSS tools. HSS‑G (ground High Speed Steel) means edges are manufactured by CNC grinding for better sharpness and hole quality. Designed for Demanding Metalwork Engineered as a Type N (normal spiral) twist drill, the 135° point angle facilitates controlled entry into harder workpieces and reduces the tendency to wander on start. This geometry shortens initial penetration time and improves centring when commencing a bore. Because the tool is a short variant, it is particularly suitable for stationary and hand‑guided drilling where stability and accuracy are critical. The cutter is therefore recommended for precision shops and maintenance tasks that require consistently round, burr‑reduced holes. Handling, Compatibility and Practical Advantages With an Overall Length of 75 mm and a Spiral Length of 43 mm, the short profile ensures a stiff setup when mounted in drill chucks. The fully ground cylindrical shank aids in secure clamping and precise run‑out on collets or chucks used in Drilling Machines and hand drills. Users will find less chatter and improved surface finish, which reduces subsequent rework. For laypersons: a fully ground shank means the shaft and flute were machined to exact tolerances rather than rolled, giving better balance and a sharper cutting geometry. Who Benefits Most from This Tool This short twist drill is aimed at professionals and advanced hobbyists who bore metals requiring repeatable accuracy—toolmakers, maintenance technicians and fabrication shops. Because the drill suits harder materials, it is less ideal for very soft woods where specialised wood bits give cleaner guidance; however, its robustness makes it versatile for many workshop applications. If precise, repeatable metal holes are your priority, this product meets those needs through focused engineering rather than general‑purpose compromise. Choose the MetavCUT Twist Drill Type N for precise metalworking and request expert technical advice from METAV Werkzeuge — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and recommendations Designation: Twist Drill (Short Twist Drill) Brand: MetavCUT SKU: 45042-FDA Diameter: 4.2 mm Point angle: 135° Type: Type N Material: HSS‑G Finish/Colour: Bright finished Execution: Short (kurz) Shank execution: Fully ground Spiral length: 43 mm Overall length: 75 mm For drilling machine: Drilling Machine / Hand Drill compatible Application: Drills for Metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (MetavCUT Type N) and when should it be chosen? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and ground flutes make it suitable for precision work in steel, cast alloys and hard plastics where stability and clean hole quality are required. Which three drill types exist and how does the MetavCUT Twist Drill fit in? The three common drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill family and is optimised for metalworking rather than for timber or masonry applications.

Spiralbohrer (Durchmesser 4,3 mm, Spitzenwinkel 135°, Typ N, Farbe blank, Ausführung kurz, Norm DIN 338, Material HSS-G) von MetavCUT Der Spiralbohrer in kurzer Ausführung ist ein HSS‑G Metallbohrer Typ N für präzise Bohrungen in legierten und unlegierten Stahlwerkstoffen. Spiralbohrer von MetavCUT für Metallanwendungen Kürzere Ausführung für hohe Stabilität Geschliffener Schaft für exakten Rundlauf Spitzenwinkel 135° für harte Werkstoffe HSS‑G: schnelleres Bohren und geringere Anpresskraft Schnelleres Bohren und längere Standzeit durch HSS‑G Bei diesem Bohrer sorgt HSS‑G (geschliffener Schnellarbeitsstahl) für eine scharfe Schneidegeometrie, die ein bis zu 40 % schnelleres Bohren ermöglicht und gleichzeitig 50 % weniger Anpresskraft benötigt. Die geschliffene Ausführung erzeugt feine Schnittkanten und saubere Bohrlöcher, was besonders bei anspruchsvollen Metallarbeiten Zeit spart. Gleichzeitig ist die Sprödigkeit von geschliffenen Bohrern zu beachten; deshalb sind Kühlung und stationäre Maschinen bei intensiver Nutzung empfehlenswert. Mehr Präzision durch kurze Auskraglänge Die kurze Ausführung reduziert die Auskraglänge deutlich und erhöht dadurch die Stabilität und Genauigkeit beim Bohren. Das Ergebnis sind bessere Rundlaufwerte und geringere Neigung zum Wandern, besonders bei manuellen Bohrmaschinen. Die Einordnung nach DIN 338 bestätigt die Serie als kurze Spiralbohrer mit Zylinderschaft, die speziell für präzise Metallbearbeitung entwickelt wurde. Der Typ N steht hierbei für die bewährte Normalspirale bei Metall. Vielseitiger Einsatzbereich für verschiedene Metallarten Dieser Spiralbohrer ist für die Bearbeitung von legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen sowie Hartkunststoff geeignet. Für den Durchmesserbereich um 4,3 mm gelten die typischen Praxisempfehlungen: Direktes Bohren ist möglich, bei hoher Präzision vorher Anpunkten oder Zentrieren empfohlen. Durch die kurze Bauform eignet sich der Bohrer sowohl für Handbohrmaschinen als auch für stationäre Maschinen mit stabiler Aufnahme. Für Handwerk, Industrie und anspruchsvolle Heimwerker Werkstätten, Instandhaltung und anspruchsvolle Heimwerker profitieren von der Kombination aus Stabilität und Schnittleistung. Die geschliffene Schaftausführung liefert präzise Ergebnisse bei Serien- und Einzelteilen, während die robuste HSS‑G‑Legierung eine gute Balance aus Standzeit und Zähigkeit bietet. Anwender sollten beachten, dass geschliffene Bohrer bei unsachgemäßer Handhabung empfindlicher sind; eine kontrollierte Drehzahl und geeignete Kühlschmierstoffe verlängern die Lebensdauer deutlich. Empfehlung: Für präzise Metallbohrungen den MetavCUT Spiralbohrer Typ N in HSS‑G wählen und bei Unsicherheiten oder für ergänzende technische Daten METAV Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 45043-FDA Durchmesser: 4,3 mm Material: HSS-G Typ: Typ N Ausführung: kurz Schaft Ausführung: geschliffen Spitzenwinkel: 135° Gesamtlänge: 75 mm Spirallänge: 43 mm Norm: DIN 338 Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der Spiralbohrer von MetavCUT Typ N geeignet? Der Spiralbohrer von MetavCUT Typ N in HSS‑G ist ausgelegt für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff und erzielt in diesen Werkstoffen saubere Bohrbilder. Kann der Spiralbohrer von MetavCUT Typ N in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT Typ N eignet sich für die Verwendung in Handbohrmaschinen; durch die kurze Ausführung wird die Stabilität erhöht, bei höherer Präzision empfiehlt sich jedoch vorheriges Anpunkten oder die Nutzung einer stationären Aufnahme. Welche Vorteile bietet die geschliffene Schaftausführung beim Spiralbohrer von MetavCUT Typ N? Die geschliffene Schaftausführung des Spiralbohrers von MetavCUT Typ N sorgt für hohe Rundlaufgenauigkeit und scharfe Kanten, was zu präziseren Bohrlöchern führt; gleichzeitig erfordert die geschliffene Geometrie eine sorgfältige Handhabung und geeignete Kühlung. Wie lässt sich die Lebensdauer des Spiralbohrers von MetavCUT Typ N verlängern? Durch angepasste Drehzahlen, kontrollierten Vorschub und den Einsatz geeigneter Kühl‑ oder Schmierstoffe lässt sich die Standzeit des Spiralbohrers von MetavCUT Typ N deutlich verbessern; bei Fragen zur Anwendung berät METAV Werkzeuge gern per eMail oder Telefon. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#45043-FDA","sku":"45043-FDA","mpn":"45043-FDA","name":"Spiralbohrer 45043-FDA","description":"Kurz-Ausführung, Durchmesser 4,3 mm, Spitzenwinkel 135°, Typ N, Farbe blank, Norm DIN 338, Material HSS-G; geschliffener Zylinderschaft für präzise Metallbohrungen; geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"4,3 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"75 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"43 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der Spiralbohrer von MetavCUT Typ N geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT Typ N in HSS-G eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff und liefert saubere Bohrbilder."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT Typ N in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT Typ N ist für Handbohrmaschinen geeignet; die kurze Ausführung erhöht die Stabilität, bei hoher Präzision empfiehlt sich vorheriges Anpunkten oder die Nutzung einer stationären Aufnahme."}},{"@type":"Question","name":"Welche Vorteile bietet die geschliffene Schaftausführung beim Spiralbohrer von MetavCUT Typ N?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Schaftausführung des Spiralbohrers von MetavCUT Typ N sorgt für hohe Rundlaufgenauigkeit und scharfe Schneidkanten, was präzisere Bohrlöcher ermöglicht; gleichzeitig erfordert die geschliffene Geometrie sorgfältige Handhabung und geeignete Kühlung."}},{"@type":"Question","name":"Wie lässt sich die Lebensdauer des Spiralbohrers von MetavCUT Typ N verlängern?","acceptedAnswer":{"@type":"Answer","text":"Die Standzeit des Spiralbohrers von MetavCUT Typ N lässt sich durch angepasste Drehzahlen, kontrollierten Vorschub und den Einsatz geeigneter Kühl- oder Schmierstoffe deutlich verbessern; bei Fragen berät METAV Werkzeuge gern per E-Mail oder Telefon."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-45043-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz-Ausführung"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"DIN 338 kurze Spiralbohrer"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine geeignet"},{"@type":"Thing","name":"Empfohlen bei Metallanwendungen"},{"@type":"Thing","name":"Kühlung und stationäre Maschinen bei intensiver Nutzung empfohlen"}]}]}

Twist Drill – Short HSS‑G, 4.4 mm, 135° (Typ N), Bright Finished, DIN 338, Fully Ground Shank — MetavCUT The Twist Drill is a short precision drill for metalworking, designed for use with drilling machines and hand drills to deliver stable, accurate holes in hard materials. Short design for increased stability and precision HSS‑G material with CNC ground flute geometry 135° tip for improved entry in hard steels Fully ground shank for high concentricity Conforms to DIN 338 for short cylindrical twist drills Precision and reduced deflection for demanding metalwork The short construction of this Twist Drill delivers higher stability and significantly reduced deflection compared with longer geometries. That shorter overhang improves hole accuracy under load and lowers the risk of breakage during tough cuts, making it particularly suitable for precise operations in workshops and industrial environments. The combination of reduced vibration and a compact length supports consistent hole quality on difficult materials. Faster cutting and easier feed thanks to ground HSS geometry Equipped with HSS‑G material and ground flute geometry, this tool offers cleaner cutting edges and excellent chip evacuation. Ground drills (HSS‑G) typically produce sharper cutting lips and better runout, which translates to faster penetration and reduced feed forces compared with rolled variants. For users unfamiliar with the term: ground means the flutes and cutting geometry are machined by grinding, resulting in very sharp, precise edges ideal for metal. Targeted application: engineered for metals and workshop use Designed as a Type N normal spiral, the Twist Drill is aimed at operations in alloyed and unalloyed steels, cast iron, sintered materials, non‑ferrous metals and hard plastics. Use with stationary drilling machines or robust hand drills is recommended; the short length suits jigs, fixtures and confined setups. Professionals and serious hobbyists who require repeatable, high‑quality holes in demanding substrates will benefit most from this tool. DIN 338 conformity and dimensional data for reliable integration Manufactured to DIN 338 standards for short cylindrical twist drills, the tool ensures compatibility with industry expectations for dimensions and performance. Key dimensions: Diameter 4.4 mm, Spiral Length 43 mm, Overall Length 75 mm and Tip Angle 135°. The fully ground shank promotes excellent concentricity in chucks, helping to maintain accuracy across repeated operations and simplifying tool changes on CNC or conventional machines. We strongly recommend the MetavCUT short HSS‑G Twist Drill (Type N) for precision metalworking — for individual technical advice or to check suitability for specific applications contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 45044-FDA Diameter: 4.4 mm Spiral length: 43 mm Overall length: 75 mm Tip angle: 135° Type: Typ N Execution: short Material: HSS‑G Shank: fully ground Surface/Finish: bright finished Application: Drills for metal Standard: DIN 338 For drilling machine: Drilling Machine / Hand Drill Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the recommended use for the MetavCUT Twist Drill (Type N)? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking applications; it excels when drilling alloyed and unalloyed steels, cast and sintered irons, non‑ferrous metals and hard plastics in both workshop and industrial settings. Can the MetavCUT Twist Drill be used in hand drills and drilling machines? Yes, the MetavCUT Twist Drill (Type N) is suitable for use in sturdy hand drills as well as stationary drilling machines; its short design and fully ground shank ensure good stability and concentricity in common chucks. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger hole diameters; its ground geometry makes it easy to sharpen and capable of withstanding higher loads. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills pointed? The pointing reduces the cross‑cut at the tip, which lowers friction and decreases the required feed force while improving centring of the tip in the Workpiece. Can you drill wood with a Twist Drill? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared to dedicated wood drills; however, metal drills are easier to resharpen and exhibit less self‑feed. At what drilling depths is the Twist Drill most used? For through‑hole drilling in solid material, Twist Drills are the standard choice; they are most commonly used up to diameters around 20 mm and drill depths up to approximately 100 mm. Is HSS or HSSE better? The general belief that HSSE steels are always superior to HSS is not universally correct; decisions should be based on specific working conditions to determine whether the higher cost of HSSE is justified.

Twist Drill — Type N short, Ø 4.5 mm, 135°, HSS‑G, bright finished, DIN 338 A short Twist Drill (Type N) designed for precise metalworking with drilling machines and hand drills. Short design increases rigidity and precision Ground HSS-G for sharp cutting and clean holes 135° tip for hard materials like stainless steel Suitable for drilling machines and handheld drills Conforms to DIN 338 for short cylindrical shank drills Precision and stability for demanding metalwork The short execution of this Twist Drill reduces overhang and therefore bending, delivering noticeably higher stability during machining. With a diameter of 4.5 mm and an overall length of 80 mm, the compact geometry is ideal for tight setups and precise centre‑to‑centre tolerance work. The Type N spiral is the classic geometry for metal drilling, while the DIN 338 designation guarantees standardised dimensions and performance expectations for short cylindrical‑shank drills. Faster cutting with lower feed force A ground HSS‑G flute geometry enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS variants under comparable conditions. This means shorter cycle times and reduced operator exertion when producing series holes in alloyed and unalloyed steels, cast steels, sintered irons and certain hard plastics. The 135° tip reduces initial point pressure and improves centring when entering harder materials, shortening dwell time on the workpiece surface. Applications and machine compatibility This Twist Drill is developed for drilling metal: steel, cast iron, non‑ferrous metals and hard plastics. It is suitable for both stationary drilling machines and portable hand drills where increased rigidity and accurate hole quality are required. The fully ground shank aids consistent clamping in chucks and collets, and the bright finished surface supports chip evacuation and inspection. Use coolant for deep or continuous cuts to preserve tip life and hole quality. Handling, life cycle and practical tips Because the flutes and geometry are produced by CNC grinding, the drill offers high runout accuracy and very sharp cutting edges, giving clean bores and reduced burr formation. Note that ground HSS drills can be more brittle than rolled variants; avoid excessive shock and use machine‑steady feeds. Re‑sharpening is possible but should be performed by experienced toolmakers to retain geometry. For optimal results, pair the drill with appropriate cutting speeds and lubricants for the specific metal being machined. For precision metal drilling tasks, choose the MetavCUT Twist Drill Type N short — METAV Werkzeuge provides expert advice and technical support: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45045-FDA Diameter: 4.5 mm Tip angle: 135° Type: Type N Execution: short Colour / Finish: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 338 Overall length: 80 mm Spiral length: 47 mm Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily intended for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, offering reliable hole quality when used with correct speeds and cooling. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for both stationary drilling machines and hand drills (Drilling Machine), but the short design particularly benefits setups that demand rigidity and precision; always ensure secure clamping and compatible cutting parameters. What are twist drills used for? Twist Drills are mainly applied when machining high‑strength materials and larger hole diameters; their form is easy to regrind and resists higher loads, making them suitable for demanding metalworking operations. Which 3 drill types exist? The three primary drill categories are metal drills, wood drills and stone/concrete drills.

MetavCUT Twist Drill (4.6 mm, 135°) — Type N, HSS-G, short, Bright Finished The MetavCUT Twist Drill is a short Type N drill designed for precision metalworking on Drilling Machines and suitable for demanding materials. Short HSS-G design for greater stability 4.6 mm diameter for precise metal holes 135° point angle for hard materials Fully ground shank for high runout accuracy Conforms to DIN 338 for reliable quality Engineered for precise metal drilling and clean holes This short Twist Drill is manufactured from HSS‑G and optimised for metal applications, delivering consistently clean holes in alloyed and unalloyed Steel, Cast Steel and Non‑Ferrous Metals. The fully ground geometry provides very sharp cutting edges and improved concentricity, which reduces wobble and produces accurate bores. For workshop environments where repeatable hole quality matters, this tool translates machine settings into predictable results and reduces rework. Short length reduces deflection and increases control A reduced overall length and a shorter flute length mean markedly improved stiffness and less tendency to bend under load. This design yields higher dimensional accuracy when drilling in tough materials and allows for more confident feed rates. The shorter HSS variant can enable up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills of similar diameter, making it especially suitable for precision work on stationary or portable Drilling Machines. Optimised geometry and material for demanding applications With a 135° point angle and Type N normal spiral, the cutter is tailored to penetrate harder workpieces with less walking and better centring. The HSS‑G (ground) fabrication process results in sharp flutes that excel at chip evacuation and produce clean hole walls; however, for best life expectancy the tool is recommended for use with appropriate coolant and controlled speeds. Typical applications include machining Steel, Cast Iron, Sintered Iron, Tempered Materials and Hard Plastics where stability and hole quality are priorities. Who benefits and practical recommendations for use Metalworkers, toolrooms and industrial maintenance teams gain the most from this short, stable design when accuracy and surface finish are critical. Use the drill in a proper chuck or collet with minimal overhang and maintain coolant or cutting fluid for long runs. Because ground drills can be more brittle than rolled variants, avoid heavy side loads and prefer controlled, axial drilling in fixed or supported setups. For questions about optimal speeds or machine compatibility, METAV Werkzeuge offers competent technical advice and workflow support. For precision metal drilling choose the MetavCUT short HSS‑G Twist Drill for stable, fast and accurate results — for technical questions or purchase guidance contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930; WhatsApp support is available at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45046-FDA Diameter: 4.6 mm Point Angle: 135° Type: Type N Execution: short Material: HSS-G Spiral/Flute Length: 47 mm Overall Length: 80 mm Shank Execution: fully ground Colour / Finish: bright finished For Drilling Machine: Drilling Machine Model Series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill (Type N) is primarily intended for drilling Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Metals, Non‑Ferrous Metals and Hard Plastics, offering reliable performance where a stable short HSS‑G geometry is required. Is this Twist Drill suitable for hand drills or only machine tools? The MetavCUT Twist Drill is designed for use on Drilling Machines; while it can be used in robust portable drills, optimal results and tool life are achieved in stationary or well‑supported machine setups due to the short, stiff design. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength workpieces and larger hole diameters. The ground geometry is easy to re‑grind and withstands higher loads. Which 3 drill types exist? The three primary drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of the Twist Drill, lowering friction and therefore required feed force, while improving centring of the tip in the workpiece. Can a metal drill be used to drill wood? A Metal Drill can be used in Wood, but guidance and hole finish are poorer; however, metal drills are easier to re‑grind and exhibit less aggressive self‑feed. For which drilling depths is the Twist Drill most commonly used? Spiral drilling into solid material is commonly performed with Twist Drills; they are most frequently used for diameters up to 20 mm and drilling depths up to 100 mm. Which is better, HSS or HSSE? General assumptions that HSSE materials are always superior to HSS are incorrect; the right choice depends on working conditions and whether the higher purchase cost of HSSE is justified.

Twist Drill 4 mm — Type N, Short, 135°, Bright finished, HSS-G, DIN 338 (MetavCUT) A Twist Drill (Type N) engineered for precise metal drilling in Drilling Machines and stationary tool setups. Short version for greater rigidity in drilling 4 mm Diameter, 135° Point for hard metals Fully ground HSS-G for sharp, precise holes Complies with DIN 338 for short twist drills Optimised for Drilling Machines and stationary use Greater efficiency and lower feed forces thanks to short design The Twist Drill in a short execution offers a reduced overhang from the chuck, which increases stability and lowers the tendency to bend during machining. The HSS-G material combined with a ground flute geometry enables up to 40% faster drilling and requires roughly 50% less feed force compared with conventional HSS drills. This results in faster cycle times on demanding metal tasks and reduces operator fatigue when working on repetitive holes. Cleaner, more accurate holes through precise grinding and geometry A fully ground flute geometry delivers very sharp cutting edges and high concentricity, producing cleaner holes and improved dimensional accuracy. The 135° point is specifically suited for harder materials such as stainless steel and reduces initial chatter and skidding when starting a hole. For customers unfamiliar with point angles: a larger point angle spreads the cutting action over a broader area, shortening penetration time and improving centre holding on tough metals. Standardised dimensions and classic Type N spiral for metalworking Manufactured to DIN 338, this short Twist Drill follows recognised tolerances and dimensions for short cylindrical-shank metal drills. The Type N normal spiral is ideal for drilling a wide range of metals including alloyed and unalloyed steel, cast materials and non-ferrous metals, as well as engineering plastics. Use in a Drilling Machine or on stationary toolholders ensures best performance; the geometry and finish are optimised for metalworking applications rather than soft-wood tasks. Ideal users and handling advice for long tool life Workshops, toolrooms and precision maintenance shops benefit most from this Standard Line product. Because ground HSS types can be more brittle than rolled alternatives, it is recommended to use the drill in stationary machines with adequate cooling and controlled feed rates to avoid breakage. The bright finished surface and fully ground shank assist with chip evacuation and ensure reliable gripping in chucks or collets, extending service intervals when used following proper machining practice. For expert selection and further technical advice on MetavCUT Twist Drills, contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45040-FDA Diameter: 4 mm Overall Length: 75 mm Spiral Length: 43 mm Execution: Short Point Angle: 135° Type: Type N Material: HSS-G Shaft Finish: Fully ground Colour: Bright finished Application: Drills for metal Suitable For: Drilling Machine Standard / Norm: DIN 338 Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill mainly used? A MetavCUT Twist Drill (Type N) is primarily applied to machining high-strength materials and larger drill diameters; its geometry is easy to resharpen and withstands greater loads. This form is commonly used when working with metals, as it combines robustness with the ability to produce precise holes in demanding materials. Which three drill types exist? Typical broad categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for metalworking rather than soft-wood or stone applications.

Twist Drill (Type N) — Short, HSS‑G, Ø 5.25 mm, 135° The Twist Drill (Type N) is a short HSS‑G metal drill designed for Drilling Machines, offering high stability and precise holes in hard materials. Short design for improved stability and precision Ø 5.25 mm suited for metal drilling tasks 135° tip for reduced breakthrough in hard metals Fully ground shank for high runout accuracy Conforms to DIN 338 for short twist drills Precision drilling with reduced feed forces and faster progress This short HSS‑G cutter delivers a measurable performance advantage when working with demanding materials. Thanks to the ground geometry, drilling can be completed up to 40% faster while requiring around 50% less feed force, which reduces operator effort and wear on hand and bench machines. The 135° point angle improves entry into stainless and hardened steels, shortening the initial bite and minimising chatter for a cleaner, more reliable hole. Stable design for straight, repeatable holes A reduced overall length and a shorter flute length increase stiffness and lower the tendency to bend under load. The combination of a short execution and a fully ground shank yields higher concentricity and better runout characteristics, which translates into more accurate bores and longer tool life in many workshop situations. Compliance with DIN 338 ensures this short twist drill meets recognised dimensional and manufacturing standards for cylindrical shank HSS drills. Made for metalworking: recommended materials and use cases This Twist Drill by MetavCUT is optimised for drilling in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast Iron, non‑ferrous metals and hard plastics. Use of a Type N spiral geometry supports cutting performance in these materials and is particularly suitable for stationary or machine‑driven operations where precision and repeatability matter most. The tool is intended for professional metalworking tasks on Drilling Machines rather than for general woodworking. Handling advice to maximise tool life and performance Ground drills can be very sharp but also somewhat more brittle than rolled types; therefore use steady, machine‑controlled feeds and adequate coolant when machining tougher alloys. Correct clamping in a clean chuck and moderate cutting speeds for the material will avoid premature wear or breakage. The short design reduces vibration and improves hole quality, but for deep or unstable setups consider additional support or a pilot drilling step to ensure concentric entry. Strong recommendation: Choose the MetavCUT short HSS‑G Twist Drill for precise metal drilling and contact METAV Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Information Twist Drill Brand: MetavCUT SKU: 450525-FDA Diameter: 5.25 mm Tip Angle: 135° Type: Type N Colour: Bright finished Execution: Short Material: HSS-G Norm: DIN 338 For Drilling Machine: Drilling Machine Spiral Length: 52 mm Overall Length: 86 mm Shank Execution: Fully ground Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its short, ground form is easier to grind and withstands greater loads, making it suitable for precise metalworking tasks where durability under stress is required. Which 3 drill types are there? In practice the main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for use in metals and hard plastics.

Twist Drill — Short Type N Twist Drill, 5.3 mm, 135° point, Bright Finished, HSS-G, DIN 338, Fully Ground Shank The Twist Drill Type N short is a precision metalworking drill for Drilling Machines, designed for stable, accurate holes in hard materials. Short design for increased stability 135° Point angle for hard metals Fully ground shank for high concentricity Conforms to DIN 338 standard HSS-G material for sharp, clean holes Outstanding stability for precise metal holes A shorter flute length reduces the exposed overhang and significantly increases stability during cutting, which makes this Twist Drill ideal when accuracy matters. The compact geometry lowers vibration and deflection, resulting in truer hole diameter and improved surface finish. For machinists working with tougher alloys, the reduced tendency to bend means fewer tool changes and more consistent component quality. Optimised for demanding metalworking tasks Engineered as a Type N normal-spiral drill, this short variant excels in drilling metal such as alloyed and unalloyed steel, cast iron and non-ferrous metals. The 135° point angle reduces the initial cutting forces and improves centring in hard materials, allowing safer penetration into stainless steels and tempered parts. This makes the tool suitable for both stationary machines and portable Drilling Machines used in workshop and production environments. Material and cutting performance explained Manufactured from HSS-G (ground high-speed steel), the twist geometry is produced by CNC grinding to deliver sharp cutting edges and superior run-out accuracy. Ground construction yields cleaner holes and finer chip evacuation, but requires appropriate coolant and careful handling to avoid brittle failure under shock. In practice, HSS-G offers a balance of cutting speed and edge retention for general-purpose metal drilling. Who benefits from this short Twist Drill Production engineers and maintenance technicians who demand precision in metal fabrication will find this tool particularly useful. The short design is advantageous where rigidity is limited or when drilling close to fixtures and shoulders. For those seeking a reliable standardised tool, compliance with DIN 338 ensures interchangeability and predictable performance across workshop setups. Choose MetavCUT’s short Twist Drill for exacting metalwork — for any questions about suitability or additional technical details, METAV Werkzeuge provides expert consultation and support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 45053-FDA Diameter: 5.3 mm Point angle: 135° Type: Type N Execution: short Colour: bright finished For Drilling Machine: Drilling Machine Spiral length: 52 mm Total length: 86 mm Shank execution: fully ground Model series: Standard Line Material: HSS-G Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The Twist Drill (MetavCUT Type N short) is primarily used for machining metal; it performs especially well on alloyed and unalloyed steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics, delivering precise cylindrical holes in such materials. Which three drill types are commonly distinguished? Commonly, drill types are classified as metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications. Why are Twist Drills pointed (why is the tip ground)? The sharpening of the tip reduces the cross-edge at the drill point, which significantly lowers friction and therefore the required feed force; this resharpening also improves centring of the tip in the workpiece for more accurate starts. Can the MetavCUT Twist Drill be used for drilling wood? A metal Twist Drill can be used in wood, but guidance and hole quality are typically inferior compared with purpose-made wood drills; the MetavCUT Type N short will work, yet results may be less clean and steering is reduced. For which drilling depths is the Twist Drill most often used? A bored-through hole in solid material is commonly executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE the better choice? The general belief that HSSE steels are categorically superior to HSS is incorrect; the decision should be based on actual working conditions and whether the specific advantages justify the higher investment.

Twist Drill (Type N) — short, Diameter 5.4 mm, 135° Point Angle, HSS‑G, bright finished, DIN 338 A Twist Drill (Type N) for precise metal drilling in Drilling Machines, designed as a short HSS‑G tool for high stability and clean holes. Short design for greater drilling stability HSS‑G ground for faster, cleaner metal holes 135° point angle for hard materials like stainless steel Fully ground shank for accurate concentricity Conforms to DIN 338 for standardised quality High drilling performance for demanding metalwork The short Twist Drill made from HSS‑G combines a compact overall length with a reduced overhang, delivering higher Stability and less vibration during machining. The 135° point angle is optimised for harder materials, so penetration is smoother and the tool stays centred in stainless steel and other alloys. Because the flute geometry is produced by CNC grinding, the drill offers Very sharp cutting edges and excellent runout accuracy, which results in cleaner, more precise holes and reduced rework for workshop and production environments. Precision engineering and material advantages A fully ground shank and flutes mean the tool achieves superior concentricity and hole quality compared with rolled alternatives. Conformity to DIN 338 ensures dimensions and tolerances are consistent for exchangeability in tool holders and collets. For users working on stationary or portable Drilling Machines, the reduced required feed force—combined with up to 40% faster drilling capability and 50% less push force under the right conditions—translates into increased productivity and less operator fatigue. Use of appropriate coolant and moderate cutting speeds will maximise life and reduce the risk of brittle breakage inherent to ground HSS geometry. Suitable applications and user guidance This short HSS‑G tool is intended primarily for metalworking: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. The compact design is particularly useful where setup space is limited or when high rigidity is required for precise bores. For best results, clamp the workpiece securely, use a correct centre punch for start guidance, and apply cutting fluid for steels and cast materials. The tool is ideal for machinists, toolroom staff and maintenance teams seeking a reliable, precision short Twist Drill for everyday metal drilling tasks. Strongly recommend the MetavCUT Twist Drill Type N short for professionals who demand precise, repeatable holes in metal — METAV Werkzeuge offers expert assistance: Email info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45054-FDA Diameter: 5.4 mm Point Angle: 135° Type: Type N Execution: short Total Length: 86 mm Spiral Length: 52 mm Shaft Finish: fully ground Surface: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal For: Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily used for drilling high‑strength metals and larger diameters; its short design and ground geometry make it especially suitable for precise work in steels, cast materials and non‑ferrous metals where clean, accurate holes are required. Which three drill types exist? The main categories are Metal Drill (often called Metal or Twist Drills), Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for metalworking tasks. Why are Twist Drills pointed? The point on the MetavCUT Twist Drill reduces the cross‑cut at the tip, cutting down friction and lowering the necessary feed force; a sharpened point also improves centring so the drill starts more accurately in the workpiece. Can you use a Twist Drill to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but it offers poorer guidance and a less clean finish compared with dedicated wood bits; it is easier to resharpen and has a lower self‑feed tendency. At which drilling depths is the Twist Drill most used? A solid through‑hole is commonly executed with a Twist Drill; for diameters up to about 20 mm and drilling depths up to approximately 100 mm, the Twist Drill is the most frequently used tool in metalworking applications. What is better, HSS or HSSE? The general belief that HSSE is always superior to HSS is incorrect; choose based on working conditions and cost‑benefit analysis — only select HSSE if the specific job requirements justify the higher purchase price.

Twist Drill Type N — Short HSS-G, 5.5 mm, 135° Tip, Bright Finished The Twist Drill Type N is a short, fully ground metalworking drill designed for precision drilling in hardened materials and use with a Drilling Machine. Short design for enhanced rigidity and precision 135° tip for demanding and hardened materials HSS‑G fully ground for sharpness and clean holes Conforms to DIN 338 for standardised quality Suitable for Drilling Machine and metal applications Precision and Material Quality for Clean Metal Holes The short Twist Drill from MetavCUT is manufactured from HSS‑G, providing exceptionally sharp cutting edges thanks to CNC grinding. This fully ground shank geometry yields high roundness accuracy and produces clean, burr‑reduced holes in metal. Because the flute geometry is ground rather than rolled, users gain improved concentricity and hole quality, which is especially important when subsequent machining steps or press‑fits demand consistent tolerances. Stability and Performance for Tough Materials A reduced overall length and shorter protrusion from the chuck significantly increase stiffness and reduce deflection, making this short Twist Drill ideal for precise work in harder materials. The 135° tip is optimised for stainless steels and other tough alloys, shortening the initial bore time and improving centring. According to manufacturer data, the ground HSS design can deliver up to 40% faster drilling while requiring about 50% less feed force compared with conventional HSS drills, which directly reduces operator effort and cycle time. Application Focused: Metalworking and Machine Use Designed primarily as a metal drill, this Twist Drill (Type N) suits a wide range of ferrous and non‑ferrous materials including alloyed and unalloyed steels, cast steels, cast irons, sintered irons, non‑ferrous metals and hard plastics. Its configuration targets stationary and portable Drilling Machines where high accuracy and repeatability matter. Operators seeking reliable performance for workshop production or repair tasks will find the short axial length advantageous for minimising runout and improving tool life under controlled cooling. Handling, Limitations and Best Practices Because ground HSS drills tend to be sharper and less ductile than rolled versions, they can exhibit greater brittleness under inappropriate use. It is recommended to use adequate cooling and support, avoid excessive overhang, and prefer machine setups that limit vibration. The DIN 338 classification confirms standard dimensions and tolerances for short cylindrical‑shank twist drills, simplifying tool selection and replacement across toolholders and machines. We recommend the MetavCUT short Twist Drill Type N for demanding metalworking tasks — for personalised advice or complementary technical data contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill (Short) Brand / Manufacturer: MetavCUT SKU: 45055-FDA Diameter: 5.5 mm Tip Angle: 135° Type: Type N Colour / Finish: Bright Finished Version / Execution: Short Shank Execution: Fully Ground Material: HSS‑G Standard / Norm: DIN 338 Spiral Length: 57 mm Overall Length: 93 mm Intended Use: Drills for Metal Suitable For: Drilling Machine (Handbohrmaschine) Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and ground geometry make it well suited to demanding metalworking tasks and produce precise, clean holes even in hard materials. Can the MetavCUT Twist Drill Type N be used in a Drilling Machine for stainless steel? Yes, the MetavCUT Twist Drill Type N with a 135° tip is especially intended for harder materials such as stainless steel, offering improved centring and reduced initial penetration time when used in a properly set up Drilling Machine. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their geometry allows relatively easy regrinding and they withstand higher loads. Which three main drill types exist? The three primary drill types are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened at the point? Point sharpening reduces the cross‑edge at the tip of the Twist Drill, which substantially lowers friction and therefore requires less feed force; at the same time the sharpened tip centres the drill more reliably in the workpiece. Can metal Twist Drills be used to drill wood? Metal Twist Drills can be used in wood, but they typically provide poorer guidance and a less clean hole compared with dedicated wood drills; however, they are easier to resharpen and show less self‑feeding.

Twist Drill — Short Type N, 5.6 mm, 135° Tip, HSS‑G, Bright Finished The Twist Drill short Type N is a precision metalworking drill bit for Drilling Machine use, designed for stable, high‑performance drilling in hard and alloyed metals. Short design for higher stability and precision Fully ground shaft for excellent runout accuracy 135° tip angle optimised for hard materials Conforms to DIN 338 for short HSS twist drills Bright finished surface for corrosion resistance and visual inspection Reliable high‑speed performance for demanding metalwork The HSS‑G construction of this short Twist Drill delivers high cutting performance and durability when machining steels, cast iron and non‑ferrous metals. The ground flute geometry produces clean, precise holes and allows up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS variants, making it particularly efficient for production tasks where time and tool life matter. The compact overall length reduces chatter and bending, improving hole quality in tougher materials. Greater stability and centring for exact bores A shorter projection from the chuck gives this short Type N bit superior stability and reduced deflection, which is essential when drilling tight‑tolerance holes. The 135° tip angle lowers the initial entry forces and helps the drill to centre better in hard workpieces such as stainless steel. The typical “normal spiral” Type N geometry is intended for metal applications and balances chip evacuation with cutting action for reliable, repeatable results. Designed for workshop and industrial applications Manufactured to DIN 338, this Twist Drill is intended for use in both stationary and portable Drilling Machines in metalworking shops, tool rooms and maintenance departments. The fully ground shank ensures precise seating in the chuck and minimises runout, while the bright finished surface facilitates visual inspection for wear. This combination makes the bit suitable for professionals who prioritise accuracy and predictable performance. Practical handling, sharpening and limitations As a ground HSS tool, the bit offers very sharp cutting edges and high roundness, enabling neat bores and easier re‑grinding when resharpening is required. For best results and longevity, use appropriate coolant during prolonged cutting in hardened materials and avoid dry, high‑speed drilling without suitable machine stability. Although the Type N Twist Drill can be used in non‑metal materials, it is optimised for metals; for woodworking or masonry, specialised bits remain recommended. Strong recommendation: Choose the MetavCUT short Twist Drill for precision metal drilling and contact METAV Werkzeuge for expert advice — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45056-FDA Type: Typ N (Type N) Diameter: 5.6 mm Tip angle: 135° Material: HSS-G Execution: Short (kurz) Surface/Colour: Bright finished (blank) Shaft finish: Fully ground (geschliffen) Spiral length: 57 mm Overall length: 93 mm For machine: Drilling Machine (Handbohrmaschine) Norm: DIN 338 Model series: Standard Line Application: Drills for metal Designation (English): Twist Drill Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT primarily used? The MetavCUT Twist Drill short Type N is mainly applied to the machining of high‑strength materials and for larger hole diameters; its short projection offers improved stability and precision. The ground geometry is easier to resharpen and withstands higher loads, making it suitable for drilling alloyed and unalloyed steels, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill falls into the metal drill category and is optimised for metalworking tasks.