Profi Line Spiralbohrer
MetavCUT Twist Drill – Type N, Ø 7.9 mm, 135° Tip, HSS‑G, Short, Bright Finished, DIN 338 The MetavCUT Twist Drill is a short Type N twist drill for metalworking, offering a 7.9 mm Diameter and a 135° Tip Angle for precise drilling in hard materials on drilling machines. Short design for improved stability and precision Fully ground HSS‑G for sharpness and fast penetration 135° tip for safe centring in hard steels Conforms to DIN 338 for reliable production use Exceptional Material and Cutting Performance for Metalworking Constructed from HSS‑G and produced as a fully ground tool, this twist drill delivers consistently sharp cutting edges and high runout accuracy. The grinding process produces very fine cutting geometry, which reduces burr formation and yields clean, dimensionally accurate holes. Because of the material and finish, feed forces are lower and drilling cycles can be shorter, which directly improves productivity in workshop and production environments. The short version reduces vibration and supports repeatable results when machining alloys, cast materials, or hard plastics. Stable Short Design for Precise, Hard‑Material Drilling A shorter overall length reduces the cantilever effect, increasing stability and lowering the risk of deflection during machining. With a 135° Tip Angle, the drill enters hard materials more gradually and maintains better centring, making it particularly suitable for stainless steel and other tough alloys. This combination of geometry and shaft finish makes the tool ideal for operations where dimensional accuracy and hole quality are critical, such as jig and fixture production or precision component manufacture. Clear Application Profile and Target Users Engineered primarily as a Drill for Metal, this Type N short twist drill suits machinists, toolrooms, and industrial workshops working on lathes, milling centres, or stationary drilling machines. Its characteristics support tasks requiring clean holes in alloyed and unalloyed steel, cast steel, cast iron, sintered materials, non‑ferrous metals and engineering plastics. For engineers seeking a robust production drill that balances lifetime, regrindability and hole quality, this tool provides an effective compromise between performance and serviceability. Standards, Shank Details and Machine Compatibility Manufactured to DIN 338, the drill complies with established dimensions and tolerances for short twist drills with cylindrical shanks. The bright finished surface and the fully ground flutes ensure reliable chip evacuation when used with appropriate lubricant or coolant, especially in through‑hole drilling. The drill is designed for use in standard chucks of Drilling Machines and bench units; when used stationary with coolant and correct speeds, it provides the best combination of lifetime and hole quality. Strong recommendation: Choose the MetavCUT Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for personalised technical advice and purchasing support – eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand/Manufacturer: MetavCUT SKU: 48079-FDA Model series: Profi Line Type: Type N Diameter: 7.9 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G Execution: Short (kurz) Shank finish: Fully ground (geschliffen) Colour/Surface: Bright finished (blank) For drilling machine: Drilling Machine (Handbohrmaschine) Application: Drills for metal (Bohrer für Metall) Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill (Type N) best suited for? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking; its HSS‑G composition and 135° tip make it suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard engineering plastics, providing clean holes and good centring. Is coolant recommended when using the MetavCUT Twist Drill? For prolonged tool life and consistent hole quality with the MetavCUT Twist Drill, especially in hard or alloyed steels, the use of appropriate coolant or lubricant is recommended to reduce heat and improve chip evacuation. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high‑strength materials and larger hole diameters; it is relatively easy to regrind and withstands higher loads while delivering precise holes in demanding metalworking tasks. Which three drill types are there? Common drill types are Metal drills, Wood drills and Masonry/Concrete drills.
Spiralbohrer 7 mm, HSS-G, kurz, Typ N, 135°, geschliffen, DIN 338, blank – MetavCUT Profi Line Der Spiralbohrer 7 mm kurz von MetavCUT ist ein präziser Metallbohrer für stationäre und handgeführte Anwendungen, optimiert für legierte und unlegierte Stähle sowie Gusswerkstoffe. Geschliffener HSS-G für präzise Metallbohrungen Spitzenwinkel 135° für harte Werkstoffe Kurze Ausführung für hohe Stabilität DIN 338 konform mit Zylinderschaft Spirallänge 69 mm, Gesamtlänge 109 mm Schnellere und kraftsparende Bearbeitung durch geschliffene HSS-Technologie Der HSS-G Kurzbohrer wurde so gestaltet, dass er beim Bohren in Metall effizienter arbeitet: dank optimierter Spanfläche ermöglicht er ein 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Ausführungen. Die geschliffene Geometrie sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stahlgüten sowie in Gusseisen und Hartkunststoffen gewährleistet. Dadurch reduziert sich die Bearbeitungszeit ohne Einbußen bei der Qualität. Stabilität und Präzision durch kurze Auskraglänge Die kurze Ausführung erhöht die Steifigkeit des Werkzeugs und minimiert Vibrationen, was besonders bei handgeführten Bohrmaschinen und beim Anbohren wichtig ist. Im Standard-Bereich für Durchmesser von 2 mm bis 13 mm bietet dieser Bohrer die ideale Kombination aus Handhabung und Leistungsfähigkeit. Anwender profitieren von geringerem Verbiegen, besserem Zentrierverhalten und höherer Bohrgenauigkeit, sodass sich der Bohrer für Montage, Werkstattarbeiten und anspruchsvolle Reparaturarbeiten eignet. Materialanpassung, Spitzenwinkel und Einsatzempfehlungen Der gewählte Spitzenwinkel 135° verbessert das Anbohrverhalten in harten Werkstoffen und verringert das Wandern beim Einstich. Als Typ N mit Normalspirale ist der Bohrer klassisch für Metall ausgelegt; die Spirallänge 69 mm und Gesamtlänge 109 mm sind auf den stationären und mobilen Einsatz abgestimmt. Für höchste Präzision empfiehlt sich vor dem Bohren ein Anpunkten mit einem Zentrierbohrer, sowie die Nutzung geeigneter Kühlung bei längeren Bohrzyklen, um Werkzeugverschleiß zu minimieren. Robustheit und Fertigungsqualität erklären Die geschliffene Schaft-Ausführung und die Fertigungsnorm DIN 338 stehen für reproduzierbare Qualität und Maßhaltigkeit. Geschliffene Bohrer zeigen schärfere Schneiden und bessere Rundläufe als walzgeformte Varianten, sind jedoch empfindlicher gegenüber Stoßbeanspruchung; daher empfiehlt sich der Einsatz in stationären Spannmitteln oder mit sicherer Spannaufnahme in Akkubohrmaschinen. So bleibt die Standzeit hoch und Produktionsfehler werden reduziert. MetavCUT empfiehlt die Profi Line Kurz-Ausführung für präzise Metallbohrungen; bei Fragen zur Wahl des passenden Bohrers oder zur Anwendung steht METAV Werkzeuge mit fachkundiger Beratung per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 zur Verfügung Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 48070-FDA Durchmesser: 7 mm Material: HSS-G Ausführung: kurz Typ: Typ N (Normalspirale) Spitzenwinkel: 135° Schaft-Ausführung: geschliffen Norm: DIN 338 Spirallänge: 69 mm Gesamtlänge: 109 mm Farbe: blank Für Bohrmaschine: Handbohrmaschine, stationäre Maschinen geeignet Modellserie: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der Spiralbohrer 7 mm von MetavCUT geeignet? Der Spiralbohrer 7 mm aus der MetavCUT Profi Line ist besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe ausgelegt und bietet dort saubere Bohrbilder. Kann der Spiralbohrer 7 mm kurz in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer 7 mm ist im Standard-Bereich einsetzbar und eignet sich für Handbohrmaschinen; die kurze Ausführung erhöht die Stabilität, dennoch empfiehlt sich sicheres Spannen und bei härteren Werkstoffen Kühlung. Worin unterscheidet sich der geschliffene HSS-G Spiralbohrer von walzgeformten Typen? Der geschliffene HSS-G Spiralbohrer liefert aufgrund des CNC-Schliffs schärfere Kanten und höhere Rundlaufgenauigkeit, was präzisere Bohrlöcher ermöglicht; als Nachteil ist die erhöhte Sprödigkeit zu beachten, weshalb schonende Handhabung und Kühlung empfohlen werden. Wie vermeide ich ein Wandern des Bohrers beim Anbohren mit dem MetavCUT Spiralbohrer? Nutzen Sie ein Zentrierstift oder einen Zentrierbohrer vor dem Durchbohren und sichern Sie das Werkstück; der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert das Wandern, ein Anpunkten erhöht jedoch die Präzision weiter. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48070-FDA","sku":"48070-FDA","mpn":"48070-FDA","name":"Spiralbohrer 48070-FDA","description":"Spiralbohrer 7 mm kurz, HSS-G, geschliffen, Typ N, Spitzenwinkel 135°, DIN 338, blank; Kurzbohrer für präzise Metallbohrungen in legierten und unlegierten Stählen, Gusswerkstoffen und Hartkunststoffen; hohe Stabilität durch kurze Auskraglänge; geeignet für Handbohrmaschine und stationäre Maschinen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"7 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine, stationäre Maschinen geeignet"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"UID","value":"48070-FDA"},{"@type":"PropertyValue","name":"Preis Netto","value":"3.91 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der Spiralbohrer 7 mm von MetavCUT geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm von MetavCUT (Profi Line) eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe und liefert dort saubere, präzise Bohrbilder."}},{"@type":"Question","name":"Kann der Spiralbohrer 7 mm kurz in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 7 mm kurz von MetavCUT kann in Handbohrmaschinen eingesetzt werden; die kurze Ausführung erhöht die Stabilität, dennoch ist sicheres Spannen und bei härteren Werkstoffen Kühlung zu empfehlen."}},{"@type":"Question","name":"Worin unterscheidet sich der geschliffene HSS-G Spiralbohrer von walzgeformten Typen?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene HSS-G Spiralbohrer von MetavCUT besitzt durch CNC-Schliff schärfere Schneiden und höhere Rundlaufgenauigkeit als walzgeformte Typen, was präzisere Bohrlöcher ermöglicht; als Nachteil ist die erhöhte Sprödigkeit zu beachten, daher empfiehlt sich schonende Handhabung und Kühlung."}},{"@type":"Question","name":"Wie vermeide ich ein Wandern des Bohrers beim Anbohren mit dem MetavCUT Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Um Wandern zu vermeiden, empfiehlt sich ein Anpunkten mit einem Zentrierbohrer oder Zentrierstift und sichere Spannaufnahme; der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert das Wandern zusätzlich."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/product/48070-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz-Ausführung"},{"@type":"Thing","name":"HSS-G Geschliffen"},{"@type":"Thing","name":"DIN 338 Zylinderschaft"}],"mentions":[{"@type":"Thing","name":"Kurzbohrer für präzise Metallbohrungen"},{"@type":"Thing","name":"Geeignet für Handbohrmaschine und stationäre Maschinen"},{"@type":"Thing","name":"Empfohlenes Vorgehen: Anpunkten und Kühlung"}]}]}
MetavCUT Spiralbohrer 7 mm, Typ N – kurz, HSS‑G, TIN‑beschichtet, 135° (DIN 338) Der Spiralbohrer 7 mm ist ein kurzer, geschliffener HSS‑G Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Spiralbohrer 7 mm, 135° Spitzenwinkel HSS‑G geschliffen für präzise Metallbohrung TIN‑Beschichtung reduziert Reibung und Verschleiß Kurze Ausführung für höhere Stabilität beim Bohren Geeignet für Handbohrmaschine und stationäre Maschinen Hohe Stabilität bei anspruchsvollen Metallarbeiten Dank der kurzen Ausführung und der geschliffenen Schaftgeometrie bietet dieser Kurzspiralbohrer eine deutlich verringerte Auskraglänge, was die Stabilität während des Bohrens erhöht. Das Resultat sind sauberere Bohrbilder und weniger Vibrationen, besonders bei harten Werkstoffen. Anwender profitieren von geringerer Werkzeugbelastung und konstanter Bohrqualität. Schnelleres und wirtschaftlicheres Bohren durch gehobene Oberflächen Die TIN‑Beschichtung reduziert die Reibung zwischen Bohrer und Werkstück, wodurch die Wärmeentwicklung und der Verschleiß sinken. In Kombination mit dem geschliffenen HSS‑G Material ermöglicht dies bis zu 40 % schnellere Vorschübe und reduziert die erforderliche Anpresskraft deutlich. Das spart Zeit und verlängert die Lebensdauer des Werkzeugs. Präzision durch geschliffene Geometrie und Normenkonformität Als geschliffener Bohrer (HSS‑G) mit DIN 338 Norm gewährleistet das Werkzeug hohe Rundlaufgenauigkeit und scharfe Schneiden. Der Typ N (Normalspirale) ist speziell für Metall geeignet und erzeugt saubere Späneführung bei legierten und unlegierten Stählen sowie Gusseisen. Diese Eigenschaften erleichtern präzise Passungsbohrungen in Werkstatt und Produktion. Materialvielfalt und Einsatzbereiche kurz erklärt Der Bohrer ist ausgelegt für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer oder Bronze und Hartkunststoff. Für Anwender ohne tiefe Materialkenntnis: HSS‑G steht für Schnellarbeitsstahl mit geschliffener Geometrie, ideal für feste Werkstoffe; TIN sorgt für zusätzlichen Verschleißschutz und bessere Wärmeabfuhr. Praxisorientierte Anwendungsempfehlung Im 2–13 mm Bereich zählt dieser 7 mm Bohrer zur Standardklasse und eignet sich sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Bohrmaschinen. Zur Erzielung optimaler Ergebnisse empfiehlt sich Vorbohren bei höheren Anforderungen an Maßhaltigkeit sowie die Nutzung von Kühlschmierstoff bei warmfesten Werkstoffen. Für wen dieses Werkzeug entwickelt wurde Dieses Werkzeug richtet sich an professionelle Anwender in Werkstatt, Montage und Instandhaltung sowie anspruchsvolle Heimwerker, die Wert auf Präzision, Standzeit und eine robuste Handhabung legen. Die Profi Line Ausstattung und die kurze Bauform machen den Bohrer zur ersten Wahl bei harten Materialien und engen Toleranzen. Empfehlung: Den MetavCUT Profi Line Spiralbohrer in Kurzausführung für präzise Metallbohrungen wählen und bei technischen Fragen gern METAV Werkzeuge kontaktieren unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer 7 mm, Typ N, kurz Marke: MetavCUT SKU: 41070-FDA Material: HSS‑G (geschliffen) Ausführung: kurz, geschliffen Beschichtung: TIN‑beschichtet Spitzenwinkel: 135° Norm: DIN 338 Gesamtlänge: 109 mm Spirallänge: 69 mm Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine / stationäre Maschinen Modellserie: Profi Line Farbe: TIN‑beschichtet Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was bedeutet HSS‑G beim MetavCUT Spiralbohrer 7 mm und wofür ist er geeignet? HSS‑G steht beim MetavCUT Spiralbohrer 7 mm für geschliffenen Schnellarbeitsstahl; diese Ausführung ist besonders geeignet für präzise Bohrungen in harten Werkstoffen wie legierten Stählen und Gusseisen. Warum ist die TIN‑Beschichtung beim MetavCUT Spiralbohrer 7 mm vorteilhaft? Die TIN‑Beschichtung des MetavCUT Spiralbohrers 7 mm reduziert Reibung und erhöhte Wärmeabfuhr, wodurch Verschleiß minimiert und die Standzeit unter Betriebsbedingungen verlängert wird. Kann der MetavCUT Spiralbohrer 7 mm an einer Handbohrmaschine eingesetzt werden? Ja, der kurze Spiralbohrer 7 mm von MetavCUT ist für Handbohrmaschine geeignet und bietet durch die kürzere Auskraglänge bessere Stabilität als lange Ausführungen. Für welche Materialien ist der MetavCUT Spiralbohrer 7 mm nicht empfohlen? Der MetavCUT Spiralbohrer 7 mm ist nicht ideal für sehr weiche Materialien, bei denen die Normalspirale schlechte Spanabfuhr liefert, oder für hochlegierte Werkstoffe ohne geeignete Kühlung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#41070-FDA","sku":"41070-FDA","mpn":"41070-FDA","name":"Spiralbohrer 7 mm","description":"Kurzspiralbohrer 7 mm, Typ N, HSS-G geschliffen, TIN-beschichtet, 135° Spitzenwinkel, DIN 338; entwickelt für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen; kurze Ausführung für erhöhte Stabilität und längere Standzeit.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer 7 mm"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS-G (geschliffen)"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz, geschliffen"},{"@type":"PropertyValue","name":"Beschichtung","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine / stationäre Maschinen"},{"@type":"PropertyValue","name":"Farbe","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Preis Netto","value":"4.08 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Was bedeutet HSS-G beim Spiralbohrer 7 mm und wofür ist er geeignet?","acceptedAnswer":{"@type":"Answer","text":"HSS-G steht für geschliffenen Schnellarbeitsstahl; der Spiralbohrer 7 mm eignet sich damit besonders für präzise Bohrungen in harten Werkstoffen wie legierten und unlegierten Stählen sowie Gusseisen."}},{"@type":"Question","name":"Welche Vorteile bietet die TIN-Beschichtung beim Spiralbohrer 7 mm?","acceptedAnswer":{"@type":"Answer","text":"Die TIN-Beschichtung reduziert Reibung und Verschleiß, verbessert die Wärmeabfuhr und verlängert die Standzeit des Spiralbohrers 7 mm bei Metallbearbeitung."}},{"@type":"Question","name":"Ist der Spiralbohrer 7 mm für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurze Spiralbohrer 7 mm ist für Handbohrmaschine geeignet und bietet durch die reduzierte Auskraglänge bessere Stabilität als längere Ausführungen."}},{"@type":"Question","name":"Für welche Materialien ist der Spiralbohrer 7 mm ausgelegt?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Kupfer, Bronze, Neusilber und Hartkunststoff."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/41070-FDA","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"HSS-G geschliffen für Metallbearbeitung"},{"@type":"Thing","name":"TIN-Beschichtung für erhöhte Standzeit"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Einsatz in Werkstatt und Montage"},{"@type":"Thing","name":"Geeignet für legierten Stahl"}]}]}
MetavCUT Twist Drill — Short HSS‑G Twist Drill (Ø 8.1 mm, 135° Tip, Type N, Bright Finished, DIN 338) The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking, offering a bright finished surface and a 135° tip for improved entry into hard materials. Short HSS-G design for increased stability 8.1 mm diameter for precision metal drilling 135° tip for harder materials like stainless steel Fully ground shank for high concentricity Compliant with DIN 338 for short Twist Drills Stability and faster drilling for demanding metalwork Short design combined with HSS‑G grinding provides tangible advantages in daily workshop use. The reduced overhang reduces vibration and bending so that drilling stays precise even under higher loads. Because the Flute Geometry is CNC‑ground, the drill cuts with sharply defined edges; this results in up to 40% faster drilling and requires about 50% less thrust than comparable conventional HSS tools, which reduces operator fatigue and machine wear. Users benefit from cleaner holes and improved tool life when used with appropriate cooling. Reliable performance in hard and alloyed steels A 135° Tip reduces the tendency to wander on hard surfaces and shortens the initial drilling time for tougher materials such as Stainless Steel and alloyed Steels. As a Type N normal‑spiral Twist Drill, this tool is optimised for Metal applications and provides consistent chip evacuation under typical machining conditions. Compliance with DIN 338 ensures that dimensions and tolerances match workshop expectations for short Twist Drills, making the drill an efficient choice for production and repair tasks where reproducible results matter. Built for precision and concentricity The Fully Ground Shank and accurate manufacturing in the Profi Line series deliver high concentricity at the chuck. This construction minimises runout and produces rounder, more accurate holes when compared to rolled alternatives. For work on stationary or mobile machine tools, the short overall length improves rigidity and gives craftsmen more control during finishing and reaming operations. For those who recondition tools, the ground geometry is also simpler to resharpen while maintaining cutting accuracy. Practical guidance and application areas This Twist Drill has been developed primarily for drilling in a range of metals including alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The short flute length (Spiral Length 75 mm) and total length of 117 mm make it especially suitable for precision work on machine tools and hand drills where stability is essential. If unsure whether this drill meets a specific application, METAV Werkzeuge offers expert consultation to advise on performance, cooling strategy and feed rates. Why choose this short Profi Line Twist Drill Manufacturing choices such as the grinding process (HSS‑G) result in sharper cutting edges and superior running accuracy. That precision translates into fewer rejects, less rework and a measurable increase in productivity in workshop environments. For operators facing frequent drilling in harder materials, the combination of Short Design and 135° Tip delivers a practical balance of durability and cutting performance without sacrificing control. Strong recommendation: Choose the MetavCUT Profi Line Short Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 48081-FDA Model Series: Profi Line Type: Typ N Diameter: 8.1 mm Spiral Length: 75 mm Overall Length: 117 mm Tip Angle: 135° Material: HSS-G Execution: short Shank Execution: fully ground Colour: bright finished For Drill Machine: Drilling Machine Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main advantage of a short Twist Drill like the MetavCUT Twist Drill? A short Twist Drill such as the MetavCUT Twist Drill offers greater stability and less tendency to bend, which improves precision when drilling hard materials; the reduced overhang also means cleaner holes and more consistent results on machine tools. Is the MetavCUT Twist Drill suitable for stainless steel and hardened material? Yes, the MetavCUT Twist Drill with its 135° Tip and HSS‑G geometry is particularly suited to harder Materials including Stainless Steel; the tip angle shortens entry time and the ground flutes maintain sharpness for effective cutting. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and for larger drill diameters. The shape is easy to resharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the chisel edge at the tip of the Twist Drill. Pointing decreases friction forces, which lowers the required feed force and helps the drill to centre more reliably in the workpiece. Can a metal drill be used in wood? A Metal Drill can be used in Wood, but guidance is reduced and the hole finish is usually not as clean. Metal Drills are easier to resharpen and typically have less self‑feeding tendency than dedicated wood drills. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE is always superior to HSS is not universally correct. When choosing between HSS and HSSE, evaluate whether your working conditions justify the higher cost of HSSE.
Twist Drill – Short HSS‑G, Ø 8.2 mm, 135° (Type N), Bright Finished The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking with Drilling Machines such as hand and stationary units, ideal where stability and clean holes are required. Short design for higher stability and precision HSS‑G fully ground for sharp, accurate holes 135° tip for hard materials like stainless steel Suitable for Drilling Machines and stationary use Conforms to DIN 338 for short twist drills High performance for demanding metal drilling Short HSS‑G geometry delivers a direct performance advantage: the short design reduces overhang and therefore deflection, improving hole accuracy under load. The fully ground cutting geometry enables up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS cutters, which is especially beneficial when working with alloyed and unalloyed Steel, Cast Iron, Sintered Iron or Hard Plastics. The 135° tip reduces walking on hard surfaces and shortens plunge time, so production cycles become more efficient while maintaining repeatable results. Precision manufacturing and what “fully ground” means for you A fully ground or HSS‑G tool is produced by CNC grinding rather than roll forming. This process yields very sharp cutting edges and high concentricity, leading to clean, precise bores and excellent roundness. Such advantages suit precision drillwork but also call for appropriate handling: ground drills can be more brittle than rolled types, so cooling and controlled feed are advised to prevent breakage and extend tool life. Compliance with DIN 338 ensures the drill matches the expected dimensions and tolerances for short twist drills with cylidrical shanks. Who benefits and where to use it Workshops, metal fabricators and maintenance engineers profit most from this short drill: it is tailored for operations requiring accurate holes in hard materials and where machine stability is limited. With a spiral length of 75 mm and an overall length of 117 mm combined with a Ø 8.2 mm core, the tool is particularly suited to drilling in confined setups or on compact Drilling Machines, where reduced overhang improves process reliability. The Type N normal spiral is the classic choice for metal applications, giving robust chip evacuation and general-purpose versatility. Practical handling tips for longer tool life To get the best from this Profi Line HSS‑G twist drill, use moderate cutting speeds for stainless and hard steels and ensure adequate coolant or lubrication during operation. Short drills tolerate higher feeds thanks to reduced bending moments, but avoid heavy side loads. If re‑sharpening is required, maintain the original 135° tip geometry to preserve centring behaviour and reduce thrust. Regular inspection for wear at the margin and lip relief keeps hole quality consistent and reduces scrap. Strong recommendation: Choose MetavCUT Profi Line short HSS‑G Twist Drills for precision metalworking and contact METAV Werkzeuge for tailored technical advice and application support — Email: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48082-FDA Type: Type N Diameter: 8.2 mm Point angle: 135° Material: HSS‑G Execution: Short Finish/Colour: Bright finished Shank finish: Fully ground Spiral length: 75 mm Overall length: 117 mm For Drilling Machine: Drilling Machine (Hand Drilling Machine) Norm: DIN 338 Model series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The Twist Drill from MetavCUT (Type N) is mainly applied for machining high‑strength materials and larger drill diameters; its geometry and grinding make it suitable for demanding metalwork where clean, precise holes are required and where the tool must withstand higher loads. Which 3 drill types exist? Common basic categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill family and is optimized for metal applications. Why are twist drills pointed? The point grind on a MetavCUT Type N Twist Drill reduces the cross‑cut at the tip, which lowers friction so that less thrust is needed; additionally, a correctly ground tip improves centring and reduces walking on the workpiece. Can the Twist Drill be used for wood? A metal drill such as the MetavCUT Type N Twist Drill can be used in wood, but guidance and finish are usually inferior to dedicated wood drills; metal drills are easier to re‑sharpen and have lower self‑feeding tendency, yet they may not give as clean a hole as a wood‑specific bit.
Spiralbohrer (8,3 mm, 135°, Typ N, blank, kurz, DIN 338, HSS-G) »Profi Line« von MetavCUT Der Spiralbohrer ist ein kurzer, geschliffener HSS‑G‑Bohrer nach DIN 338 für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Kurze Ausführung für hohe Stabilität Geschliffene HSS‑G‑Spitze für präzise Bohrungen 135° Spitzenwinkel für harte Werkstoffe Geeignet für Stahl, Guss und Nichteisenmetalle DIN 338 Klassifikation, Profi Line von MetavCUT Hohe Präzision und verbesserte Rundlaufstabilität für Metallbohrungen Dank der kurzen Ausführung reduziert dieser Spiralbohrer das Auskragen aus dem Bohrfutter, wodurch die Stabilität bei Vorschub deutlich steigt und das Verbiegen minimiert wird. Der geschliffene Schaft sorgt für gleichmäßigen Rundlauf, was besonders bei Bohrungen in legierten und unlegierten Stahl sowie Gussmaterialien saubere, gratarme Bohrbilder liefert. Für Anwender aus Werkstatt, Montage und Hobbybereich bedeutet das weniger Nacharbeit und höhere Prozesssicherheit. Effizienteres Bohren durch optimierte Geometrie und Schnittwerte Die Geometrie des geschliffenen HSS‑G‑Bohrers reduziert die notwendige Anpresskraft deutlich; Herstellerangaben weisen auf bis zu 40 % schnellere Bohrgeschwindigkeit und 50 % geringere Anpresskraft gegenüber konventionellen HSS‑Ausführungen hin. Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe und verkürzt die Anbohrphase, sodass Vorrichtungen mit begrenzter Leistungsreserve effizienter arbeiten. Diese Merkmale machen das Produkt zur rationalen Wahl bei anspruchsvollen Metallbearbeitungen. Vielseitige Einsatzfelder und empfohlene Arbeitsweise Der Spiralbohrer mit 8,3 mm Durchmesser fällt in den Standard‑Bereich (2,0–13,0 mm) und ist damit prädestiniert für Alltagsaufgaben in Werkstatt, Montage und bei DIY‑Projekten. Direktes Bohren ist möglich; bei hoher Präzision empfiehlt sich zuvor ein Anpunktieren mit Zentrierbohrer. Die Norm DIN 338 weist auf die Eignung für stationäre Anwendungen hin, wobei bei längeren Bohrtiefen auf Kühlung und geeignete Spanntechnik zu achten ist. Die bewährte Profi Line richtet sich an Anwender, die zuverlässige Ergebnisse erwarten. Hinweise zur Kühlung, Werkzeugschutz und Arbeitssicherheit Für dauerhaft stabile Ergebnisse sollten bei Bohrungen in Stahl und Gusswerkstoffen Kühlschmierstoffe eingesetzt werden, um Überhitzung und Verschleiß zu reduzieren. Bei Handgeführten Maschinen empfiehlt sich kontrollierter Vorschub, um die Lebensdauer des geschliffenen Bohrers zu erhöhen. Bei ungewöhnlichen Werkstoffen oder speziellen Anforderungen steht die technische Beratung von METAV Werkzeuge zur Verfügung, um die passende Bohrer‑Ausführung und Arbeitsschritte sicher abzustimmen. Empfehlung: Vertrauen Sie auf die Präzision der MetavCUT Profi Line und wählen Sie diesen Spiralbohrer mit 135° Spitzenwinkel für zielsichere Metallbohrungen — bei Fragen berät METAV Werkzeuge gern persönlich per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 48083-FDA Durchmesser: 8,3 mm Material: HSS-G Ausführung: kurz Schaftausführung: geschliffen Spirallänge: 75 mm Gesamtlänge: 117 mm Spitzenwinkel: 135° Typ: Typ N Norm: DIN 338 Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Typ N, HSS‑G) mit 135° Spitzenwinkel eignet sich für harte Werkstoffe wie Edelstahl, vorausgesetzt, es werden geeignete Kühlmittel und eine stationäre Aufnahme verwendet. Kann ich den Spiralbohrer mit einer Handbohrmaschine verwenden? Ja, der Spiralbohrer ist für den Einsatz an einer Handbohrmaschine vorgesehen; bei Handbetrieb sollte auf kontrollierten Vorschub und möglichst kurze Auskraglängen geachtet werden, um Ausbruch und Bruch zu vermeiden. Warum ist die geschliffene Ausführung vorteilhaft? Die geschliffene Ausführung (HSS‑G) des Spiralbohrers gewährleistet schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern in Metall führt; das erhöht die Effizienz in Werkstatt und Produktion. Wie tief kann ich mit dem 8,3 mm Spiralbohrer bohren? Für den 8,3 mm Spiralbohrer gilt die allgemeine Empfehlung des Standard‑Bereichs: direkt bohren ist möglich, bei hoher Präzision empfiehlt sich vorheriges Anpunktieren; bei übermäßig großen Bohrtiefen ist auf Spanabfuhr und Kühlung zu achten. Bietet METAV Werkzeuge Beratung bei technischen Fragen an? Wenn Unsicherheit besteht, ob der Spiralbohrer Ihre Anforderungen erfüllt, oder Ergänzungsdaten benötigt werden, steht METAV Werkzeuge mit technischer Beratung per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 und WhatsApp +49 170 2837271 gerne zur Verfügung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48083-FDA","sku":"48083-FDA","mpn":"48083-FDA","name":"Spiralbohrer 48083-FDA","description":"Spiralbohrer 8,3 mm, 135° Spitzenwinkel, Typ N, blank, kurz, DIN 338, HSS-G; kurzer geschliffener Zylinderschaft für präzise Metallbohrungen; geeignet für Stahl, Guss und Nichteisenmetalle; Profi Line von MetavCUT.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,3 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 8,3 mm von MetavCUT (Typ N, HSS-G) mit 135° Spitzenwinkel eignet sich für harte Werkstoffe wie Edelstahl, sofern geeignete Kühlmittel und idealerweise eine stationäre Aufnahme verwendet werden."}},{"@type":"Question","name":"Kann ich den Spiralbohrer mit einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 8,3 mm von MetavCUT ist für Handbohrmaschinen vorgesehen; bei Handbetrieb sollte kontrollierter Vorschub und geringe Auskraglänge beachtet werden, um Ausbruch und Bruch zu vermeiden."}},{"@type":"Question","name":"Warum ist die geschliffene Ausführung vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Ausführung (HSS-G) des Spiralbohrers von MetavCUT erzeugt schärfere Schneiden und bessere Rundlaufgenauigkeit, was saubere, gratarme Bohrbilder in Metall liefert und die Effizienz erhöht."}},{"@type":"Question","name":"Wie tief kann ich mit dem 8,3 mm Spiralbohrer bohren?","acceptedAnswer":{"@type":"Answer","text":"Für den Spiralbohrer 8,3 mm gelten die üblichen Empfehlungen: Direktbohren ist möglich; bei hoher Präzision vorher anpunktieren; bei großen Bohrtiefen auf Spanabfuhr und Kühlung achten."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-48083-fda","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurzausführung"},{"@type":"Thing","name":"HSS-G geschliffener Bohrer"},{"@type":"Thing","name":"Anwendung: Metallbohrung"}],"mentions":[{"@type":"Thing","name":"DIN 338"},{"@type":"Thing","name":"Profi Line"},{"@type":"Thing","name":"Typ N"},{"@type":"Thing","name":"Kühlmittel empfohlen"}]}]}
Twist Drill Type N — 8.4 mm, 135°, short, bright finished, HSS‑G, DIN 338 (MetavCUT) A Twist Drill Type N designed for precise metalworking, ideal for Drilling Machines where stability and clean holes are required. Short Twist Drill Type N 8.4 mm diameter 135° point for harder materials like stainless steel HSS‑G ground for sharp cutting and fast drilling Fully ground shank for high concentricity and stability Complies with DIN 338 for short cylinder shanks High cutting performance for demanding metal jobs The HSS‑G composition and ground geometry deliver a clear benefit: faster, cleaner drilling with less operator effort. This short design reduces the exposed length and therefore the tendency to bend, so users achieve precise holes even in tough materials. For professionals working with alloyed or unalloyed Steel, Cast Steel and Hardened Plastics, the result is a higher first‑pass success rate and reduced rework time. Stable handling and improved concentricity for machine use Because the shank is fully ground, the bit runs truer in the chuck, which directly reduces runout and improves hole accuracy. The reduced vibration also extends tool life and lowers the risk of breakage during stationary or portable drilling operations. This is particularly valuable when drilling on a Drilling Machine under feed and coolant, where consistent concentricity matters. Geometry designed for hard materials and precise starts A 135° point angle shortens the initial penetration time on harder workpieces and helps to centre the bit without wandering. The Type N normal spiral profile is optimised for metalworking and provides reliable chip removal while maintaining cutting edge stability. For less experienced users: a larger point angle means easier start and less burr formation on the exit side. Short length advantage and recommended applications The short overall length increases rigidity, which lowers the chance of deflection and improves surface finish in the hole. This makes the bit especially suitable for precise workshops and production runs where repeatability is required. Typical applications include drilling in Steel, Cast Iron, Sintered Materials and Non‑Ferrous Metals where high accuracy and clean bores are demanded. Target user and usage tips Designed for machinists, toolroom personnel and serious hobbyists, this HSS‑G short twist drill suits situations where stability and hole quality are priorities. For best results, use appropriate cutting fluid and moderate feed rates; because ground bits can be more brittle than rolled alternatives, avoid excessive side loads and prefer stationary machines or rigid setups. Strong recommendation: Choose MetavCUT’s short Twist Drill Type N when demanding metalworking requires high precision and reliable performance — for further technical advice or to confirm suitability for a specific task, METAV Werkzeuge provides expert consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48084-FDA Diameter: 8.4 mm Overall length: 117 mm Spiral length: 75 mm Point angle: 135° Type: Type N Execution: short Finish: bright finished Material: HSS-G Shank: fully ground For drilling machine: Drilling Machine Series: Profi Line Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill Type N are mainly applied to the machining of high‑strength materials and larger drill diameters; their form is easy to sharpen and they withstand heavy loads, making them ideal for demanding metal drilling tasks. Which three drill types exist? The three primary drill categories are metal drills, wood drills, and masonry/concrete drills. Can the MetavCUT Twist Drill Type N be used in wood? A metal Twist Drill can be used in Wood, but guidance and finish are generally inferior compared with dedicated wood bits; metal drills are easier to resharpen and show less self‑feeding, so results may be acceptable for non‑critical tasks. At which drilling depths is a Twist Drill most commonly used? A Twist Drill is the most frequently used tool for through drilling; it is common for diameters up to 20 mm and drilling depths up to 100 mm, especially for stable, full‑section bores in metal.
Twist Drill (Type N) — Short HSS‑G Metal Drill, Ø 8.5 mm, 135° The Twist Drill (Type N) is a short, bright‑finished HSS‑G drill designed for precision metalworking in drilling machines and hand drills. Short design for high stability and precision HSS‑G ground tip for clean, accurate holes 135° tip angle optimised for hard materials Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Precision and faster penetration in hard metals The Profi Line short Twist Drill brings measurable efficiency to metalworking: the HSS‑G ground geometry reduces required feed force and enables up to 40% faster drilling compared with conventional HSS types. With a 135° tip angle, the drill enters hard materials more smoothly and reduces wandering on the surface, so one clean, centred hole is achieved with less rework. This results in time savings and improved process reliability for daily workshop tasks. Greater stability and reduced deflection during drilling A reduced overall projection improves stiffness: the short execution (total length 117 mm, spiral length 75 mm) minimises bending and vibration when compared with longer drills. The shorter overhang leads directly to better hole accuracy and longer tool life in many setups. The fully ground shank ensures reliable clamping and concentricity in standard drill chucks and machine spindles, lowering runout and improving surface quality of the bore. Designed for a wide range of metalworking applications This Twist Drill (Type N) is tailored for demanding tasks: ideal for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The normal spiral geometry of Type N provides a balanced chip evacuation and cutting action suited to general metal drilling. Use in stationary drilling machines or appropriately rated hand drills delivers consistent results when standard cooling and speeds for the material are observed. Manufacturing standard, sharpening and recommended handling Manufactured to DIN 338, the drill is produced with CNC grinding of the flute geometry (HSS‑G), which gives very sharp cutting edges and a high degree of concentricity. Ground drills can be more brittle than rolled variants; therefore, application with coolant and controlled feeds is recommended to avoid breakage. For maintenance, regrind the lip and chisel edge respecting the original 135° tip to retain centring performance and chip formation characteristics. Who benefits from this Profi Line Twist Drill Workshop professionals and maintenance technicians who require fast, precise holes in tough materials will value the combination of short design and ground HSS quality. The tool is particularly useful where repeatable accuracy and reduced setup time matter, for example in toolrooms, small series production or repair work. METAVCUT’s specification focuses on dependable performance for metalworking environments. Strong recommendation: choose the MetavCUT Profi Line Twist Drill for precision metal drilling — for expert technical advice contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48085-FDA Diameter: 8.5 mm Tip angle: 135° Type: Type N Material: HSS‑G (ground high speed steel) Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour: bright finished Intended for: Drilling Machine / Hand Drill Norm: DIN 338 Model series: Profi Line Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Profi Line Twist Drill mainly used for? The MetavCUT Profi Line Twist Drill (Type N) is primarily used for drilling into high‑strength and hard metals; it performs especially well in alloyed and unalloyed steel, cast iron and similar materials where a durable, accurate hole is required. Can the MetavCUT Profi Line Twist Drill be used in a hand drill? Yes, the MetavCUT Profi Line Twist Drill can be used in suitably rated hand drills as well as in stationary drilling machines, provided the chuck secures the fully ground shank correctly and recommended speeds and cooling are applied. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength workpieces and larger drill diameters. This shape is easy to sharpen and withstands higher loads. Which three drill types exist? There are three primary drill categories: Metal Drill, Wood Drill, and Stone/Concrete Drill. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction so that less feed force is needed and the tip centres more reliably in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and the finish is less clean; however, these drills are easier to re‑sharpen and have lower self‑feed tendency. At which drilling depths is the Twist Drill the most used tool? A through‑hole in solid material is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The widespread belief that HSSE is always superior to HSS is not universally true. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your application.
Spiralbohrer (Typ N) Ø 8,5 mm · 135° · TIN-beschichtet · kurz · HSS-G · DIN 338 · geschliffen · MetavCUT Profi Line Der Spiralbohrer (Typ N) ist ein kurzer, geschliffener HSS-G-Bohrer mit TIN-Beschichtung für präzise Metallbohrungen in legierten und unlegierten Stählen. Spiralbohrer Typ N, Ø 8,5 mm, kurze Ausführung TIN-Beschichtung reduziert Reibung und Verschleiß Geschliffene HSS-G-Geometrie für präzise Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe Höhere Standzeit durch TIN-Beschichtung und HSS-G Die Kombination aus HSS-G-Werkstoff und TIN-Beschichtung sorgt für deutlich reduzierte Reibung und bessere Wärmeabfuhr an der Schneide. Dadurch verlängert sich die Standzeit bei Bohrungen in Stahl, Gusseisen und Nichteisenmetallen. Für Anwender bedeutet das weniger Werkzeugwechsel und eine höhere Produktivität bei Serien- und Einzelteilen. Präzise Bohrbilder dank geschliffener Geometrie Dank der geschliffenen Spiralgeometrie entstehen sehr scharfe Schneiden und ein konstanter Rundlauf, was saubere Bohrlöcher und enge Toleranzen ermöglicht. Diese Eigenschaft macht den Kurzbohrer besonders geeignet für stationäre Maschinen und Anwendungen, bei denen maßhaltige Löcher gefordert sind. Kurze Ausführung für mehr Stabilität und Genauigkeit Die kurze Auskraglänge reduziert die Durchbiegung unter Vorschub und erhöht die Stabilität während des Bohrens. Gerade bei harten Werkstoffen und engen Bohrtiefen bietet die kurze Ausführung präzisere Ergebnisse und geringeren Werkzeugverschleiß im Vergleich zu langen Bohrern. Konstruktion und Anwendungsempfehlung für Metall Mit einem Spitzenwinkel 135° und der klassischen Typ-N-Spiralform ist der Bohrer speziell auf metallische Werkstoffe ausgelegt. Für beste Ergebnisse wird die Verwendung einer geeigneten Kühlung empfohlen, insbesondere bei Serienbohrungen oder beim Bearbeiten harter Werkstoffe. Die Einhaltung der Norm DIN 338 garantiert reproduzierbare Abmessungen und konsistente Qualität. Für wen dieser Bohrer ideal ist Professionelle Anwender in Werkstatt und Industrie profitieren von der Kombination aus Robustheit und Präzision. Der Bohrer eignet sich für stationäre Säulenbohrmaschinen sowie für Handbohrmaschinen bei kontrolliertem Einsatz und entsprechender Kühlung. Wer Wert auf saubere Bohrbilder in Stahl und Guss legt, erzielt mit diesem Werkzeug schnelle und zuverlässige Ergebnisse. Empfehlung: MetavCUT Profi Line Spiralbohrer mit TIN-Beschichtung wählen für dauerhaft präzise Metallbohrungen; bei Fragen berät METAV Werkzeuge gern unter info@metav-werkzeuge.com oder +49 2822 7131930 Bezeichnung: Spiralbohrer Marke/Hersteller: MetavCUT SKU: 41085-FDA Durchmesser: 8,5 mm Typ: Typ N Material: HSS-G Ausführung: kurz Schaft Ausführung: geschliffen Farbe/Oberfläche: TIN-beschichtet Spitzenwinkel: 135° Gesamtlänge: 117 mm Spirallänge: 75 mm Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was macht den MetavCUT Spiralbohrer Typ N mit TIN-Beschichtung besonders geeignet für Stahl? Der MetavCUT Spiralbohrer Typ N kombiniert HSS-G-Material mit einer TIN-Beschichtung, wodurch Reibung und Verschleiß beim Bohren in legierten und unlegierten Stählen deutlich reduziert werden. Das Ergebnis sind längere Standzeiten und saubere Bohrbilder. Kann der Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwendet werden? Der Spiralbohrer von MetavCUT ist für Handbohrmaschinen geeignet, allerdings ist bei der kurzen Ausführung auf eine stabile Spannaufnahme und verlangsamten Vorschub zu achten, um Bruch und Verkantung zu vermeiden. Wie sollte beim Einsatz des MetavCUT Profi Line Spiralbohrers gekühlt werden? Für den MetavCUT Profi Line Spiralbohrer empfiehlt sich der Einsatz eines geeigneten Kühlschmierstoffs, besonders bei Serienbohrungen und harten Werkstoffen, um Reibung zu reduzieren und die Lebensdauer der Schneiden zu erhöhen. Entspricht der Spiralbohrer der Norm DIN 338 und was bedeutet das praktisch? Ja, der Spiralbohrer entspricht der Norm DIN 338, was standardisierte Abmessungen und Ausführungen garantiert und die Austauschbarkeit sowie die Planbarkeit im Fertigungsprozess erleichtert. Brauche ich Beratung zur Auswahl des passenden Bohrers bei METAV Werkzeuge? Wenn Unsicherheit besteht, ob der MetavCUT Spiralbohrer Typ N die richtige Wahl ist, bietet METAV Werkzeuge ausführliche Beratung per E‑Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#41085-FDA","sku":"41085-FDA","mpn":"41085-FDA","name":"Spiralbohrer 41085-FDA","description":"Spiralbohrer Typ N, Ø 8,5 mm, kurz, TIN-beschichtet, HSS-G, Spitzenwinkel 135°, geschliffen; geeignet für Metallbohrungen in legierten und unlegierten Stählen sowie Guss- und Nichteisenmetallen; Norm DIN 338; Profi Line.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke/Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,5 mm"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe/Oberfläche","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"5"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"}],"brand":null},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Was macht den MetavCUT Spiralbohrer Typ N mit TiN‑Beschichtung besonders geeignet für Stahl?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer Typ N kombiniert HSS‑G mit TiN‑Beschichtung, wodurch Reibung und Verschleiß beim Bohren in legierten und unlegierten Stählen deutlich reduziert werden; das verlängert die Standzeit und sorgt für saubere Bohrbilder."}},{"@type":"Question","name":"Kann der MetavCUT Spiralbohrer Typ N mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer Typ N eignet sich für Handbohrmaschinen; bei der kurzen Ausführung auf stabile Spannaufnahme und verlangsamten Vorschub achten, um Bruch und Verkantung zu vermeiden."}},{"@type":"Question","name":"Wie sollte beim Einsatz des MetavCUT Profi Line Spiralbohrers gekühlt werden?","acceptedAnswer":{"@type":"Answer","text":"Für den MetavCUT Profi Line Spiralbohrer wird der Einsatz eines geeigneten Kühlschmierstoffs empfohlen, besonders bei Serienbohrungen und harten Werkstoffen, um Reibung zu reduzieren und die Lebensdauer der Schneiden zu erhöhen."}},{"@type":"Question","name":"Entspricht der Spiralbohrer der Norm DIN 338 und was bedeutet das praktisch?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer entspricht der Norm DIN 338; das garantiert standardisierte Abmessungen und Ausführungen sowie Austauschbarkeit und Planbarkeit im Fertigungsprozess."}},{"@type":"Question","name":"Für welche Materialien eignet sich der MetavCUT Spiralbohrer Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer Typ N eignet sich für legierte und unlegierte Stähle, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Typ N"},{"@type":"Thing","name":"HSS-G Kurzbohrer"},{"@type":"Thing","name":"TiN Beschichtung für längere Standzeit"}],"mentions":[{"@type":"Thing","name":"DIN 338 Norm"},{"@type":"Thing","name":"Kurze Ausführung für höhere Stabilität"},{"@type":"Thing","name":"Geschliffene Geometrie für präzise Bohrbilder"}]}]}
Twist Drill — Short HSS-G Twist Drill Ø 8.6 mm · 135° tip · Type N · Bright Finished · Fully Ground Shank · DIN 338 · MetavCUT Profi Line The Twist Drill short Type N is a precision drill for metalworking, designed for stable, accurate holes in hard and alloyed steels with its 135° tip. Short design for increased stability and precision HSS‑G ground for clean, accurate hole quality 135° tip optimised for hard and stainless steels Fully ground shank for excellent concentricity Complies with DIN 338 for short twist drills Greater Stability for Precise Metal Drilling This short Twist Drill delivers enhanced stability thanks to its reduced overhang and compact overall length. The short flute length reduces bending and vibration, which results in sharper, more concentric holes and longer tool life when used under appropriate conditions. For work on milling or drilling machines where rigidity matters, the compact design significantly improves repeatability and reduces the risk of wander in tough materials. Faster Cutting with Lower Feed Forces The specially ground HSS‑G geometry is engineered to cut more efficiently: the manufacturer reports up to 40% faster drilling and approximately 50% reduced feed force compared with conventional HSS variants. The 135° tip shortens initial bore time in harder metals and helps maintain the centre, while the ground cutting lips deliver a clean chip flow and reduced heat generation during operation. Built for Metalworking: Materials and Use Cases This Type N short twist drill is intended primarily for metal applications, including alloyed and unalloyed steels, cast steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its bright finished surface and fully ground shank make it particularly suitable for stationary and machine‑based drilling, where precision and surface quality of the hole are priorities. Typical users are toolrooms, metal workshops and maintenance departments requiring reliable performance in demanding materials. Precision Manufacturing and Practical Considerations Manufactured to DIN 338 standards, the drill is produced by grinding the flutes (HSS‑G), yielding very sharp cutting edges and excellent runout accuracy. The fully ground cylindrical shank ensures secure clamping and minimal runout in the chuck. Note that ground HSS drills can be comparatively brittle; for best results, use appropriate coolant, moderate speeds and the support of a rigid machine setup to avoid premature breakage. Highly recommended: Choose the MetavCUT short Twist Drill for demanding metalworking tasks — for technical questions or to confirm suitability for your application, contact METAV Werkzeuge for expert advice via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or on WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48086-FDA Type: Type N (Normal spiral) Diameter: Ø 8.6 mm Spiral (flute) length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G (ground high‑speed steel) Shank: Fully ground (geschliffen) Finish: Bright finished Execution: Short (kurz) Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine (Handbohrmaschine) Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N machine reliably? The MetavCUT Twist Drill Type N is suitable for a wide range of metals, including alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics; its HSS‑G ground geometry is optimised for clean holes in demanding materials. For what is a Twist Drill used? A Twist Drill is primarily used for machining high‑strength materials and larger diameters; its form is easy to sharpen and it withstands considerable loads, which makes it a common choice for drilling in metal and other demanding applications. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials matched to the intended workpiece.
Introducing Twist Drill — MetavCUT short Type N, 8.7 mm, 135°, HSS‑G, DIN 338, bright finished The Twist Drill is a short Type N HSS‑G drill designed for precise metalworking in drilling machines and hand drills, optimised for hard materials and industrial use. Short design for enhanced stability and accuracy HSS‑G material for sharp, long‑lasting edges 135° tip angle for hard materials and stainless steel Fully ground shank for high concentricity Conforms to DIN 338 for consistent quality Faster, more stable drilling in demanding metalwork A short, fully ground HSS‑G drill blank delivers a tangible productivity gain when machining metal. The reduced overhang improves rigidity, which means less vibration and cleaner holes even in tougher alloys. For shop floors and maintenance work where repeatable accuracy matters, this short configuration reduces the risk of runout and tool deflection, translating into fewer reworks and more consistent component fit. Optimised tip geometry for hard materials The 135° tip angle and Type N spiral geometry are chosen to reduce initial cutting forces and improve centring in metals such as alloyed and unalloyed steel. This makes the tool particularly effective when starting holes in stainless steel or cast components. The broader tip reduces the tendency to "grab" while the flute geometry efficiently evacuates chips, so feed rates can be maintained with lower thrust force. Built for professional applications and precise results Designed under DIN 338 as a short twist drill, this component suits stationary and portable drilling machines where precision counts. The combination of HSS‑G metallurgy and CNC grinding yields very sharp cutting edges and high concentricity, producing burr‑reduced holes. Use coolant for longer life during deep or continuous drilling to avoid thermal softening. Who benefits from this short twist drill This tool is aimed at machinists, toolroom technicians and maintenance engineers requiring reliable metal drilling performance. The robust construction and Type N cutting geometry make it suitable for a wide range of metals, including cast iron and non‑ferrous alloys. Where compact setup or limited reach reduces leverage, the short design supports steadier machining and repeatable tolerances. Practical handling and drilling recommendations For best results, clamp workpieces securely and select appropriate spindle speed for an 8.7 mm diameter HSS‑G drill in metal. Apply moderate feed to allow the cutting lips to engage and use coolant where possible to extend tool life. Re‑sharpening is feasible for ground drills but must be performed carefully to preserve geometry. The short flute length of 75 mm and overall length of 117 mm make this drill practical for most bench and machine setups. Strongly recommended: Choose MetavCUT when precision and stability are required — METAV Werkzeuge offers expert advice on matching this tool to your machining setup, including speed and coolant recommendations. For personal assistance contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48087-FDA Type: Type N Diameter: 8.7 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G Shank finish: Fully ground Execution: Short Colour: Bright finished Application: Drills for metal Standard: DIN 338 Model series: Profi Line For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Type N short drill? The MetavCUT Twist Drill Type N is primarily used for metalworking and is suited to alloyed and unalloyed steels, cast iron, non‑ferrous metals and hard plastics; its short, rigid form and 135° tip make it especially effective for precise drilling in hard materials. Which three drill types exist and where does the MetavCUT Type N belong? There are three common drill categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N is a metal drill designed for professional machining of metals and belongs to the classic metal drill category.
Twist Drill short HSS-G Type N — Ø 8.8 mm, 135° tip, Bright Finished, DIN 338 The Twist Drill short HSS-G Type N is a precision metal‑drilling tool designed for use in Drilling Machines, offering high stability and fast cutting performance for hard materials. Short design for improved stability Ø 8.8 mm for precise metal holes 135° tip for hard materials like stainless steel HSS‑G fully ground for sharp cutting edges Conforms to DIN 338 for consistent accuracy Faster, cleaner metal drilling with measurable efficiency The short Twist Drill from MetavCUT combines a compact geometry with a HSS‑G ground flute to deliver up to 40% faster drilling and 50% less feed force compared with conventional HSS variants. This efficiency reduces operator effort and machine load, making the tool particularly advantageous for repetitive metalworking tasks. The reduced overhang lowers vibration and increases Precision, resulting in cleaner hole walls and less burr formation. Reliable performance in hard and alloyed metals Designed as a Type N normal‑spiral drill, this short twist drill is optimised for a wide range of metallic materials: legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle and hard plastics. The 135° tip angle shortens entry time and improves centring in tougher workpieces, so fewer dwell corrections are needed. For users with limited experience, this means more consistent results when working with challenging materials. Precision geometry and fabrication for professional results The tool is manufactured according to DIN 338 as a short twist drill with a cylindrical shank. The fully ground flute geometry (HSS‑G) ensures razor‑sharp cutting edges and excellent runout accuracy, which benefits machining centres and manual setups alike. Ground drills deliver very clean holes and high repeatability; however, they require appropriate coolant and controlled feed to avoid chipping under heavy intermittent loads. Compact design that expands machine compatibility With a spiral length of 75 mm and overall length of 117 mm, the short execution reduces cantilever and enhances stability in the chuck. This compactness makes the drill well suited for use in Drilling Machines where rigidity and minimal deflection are critical. The bright finished surface aids chip evacuation and inspection, while the cylindrical shank fits standard chucks reliably. Practical guidance for safe and effective use When working with harder alloys, prefer moderate speeds and steady feed to leverage the 135° geometry. Use cutting fluid for prolonged tool life and improved surface finish. The short design is ideal for setups where overhang must be minimised; for very deep holes beyond the spiral length, choose an appropriately longer tool. For specific machining parameters or support with selection, METAV Werkzeuge offers comprehensive advice and technical consultation. Strong recommendation: For precise metalworking choose the MetavCUT short HSS‑G Twist Drill Type N for its superior stability and cutting efficiency — for technical questions or personalised advice contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48088-FDA Type: Type N Diameter: 8.8 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour/Finish: bright finished Application: Drills for metal Model series: Profi Line For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which tasks suit the MetavCUT Twist Drill short HSS‑G Type N best? The MetavCUT Twist Drill short HSS‑G Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easy to regrind and withstands higher loads, making it especially suitable for precise metalworking and demanding industrial applications. Which three drill types are commonly available? The three principal drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling in a variety of metals.
MetavCUT Twist Drill (Type N) — Short HSS‑G, Ø 8.9 mm, 135° Tip, Bright Finished, DIN 338 A MetavCUT Twist Drill (Type N) for precise metalworking, optimised for use with a Drilling Machine and handheld drills where stability and clean holes are essential. Short design for increased stability and precision Fully ground shank for high runout accuracy 135° tip angle for hard materials HSS‑G material for fast, precise metal drilling Conforms to DIN 338 for standardised performance Short length for greater accuracy and less deflection A shorter overall length reduces the exposed Cantilever and therefore the tendency to bend during drilling. The MetavCUT short Twist Drill combines a reduced Spiral Length with a robust geometry to deliver higher stability and repeatable hole accuracy. For workshop applications this means fewer reworks and tighter tolerances, especially when working with hard materials where tool chatter normally degrades the hole quality. Sharper geometry lowers feed forces and boosts speed The HSS‑G (ground high speed steel) geometry and a 135° tip are tailored to penetrate tougher metals with less effort. The grinded flute profile produces very sharp cutting edges and better centring, so drilling can be up to 40% faster and requires significantly lower Feed Force compared with conventional HSS bits. Type N normal spiral makes this bit especially suitable for steels, cast materials and non‑ferrous metals while maintaining clean, burr‑reduced holes. Engineered for metalworking and standardised reliability Manufactured to DIN 338 the short Twist Drill is specified for metal applications on stationary and portable drilling equipment. It excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. Conformance to the norm ensures consistent dimensions, shank fit and performance across batches, simplifying tool selection and inventory for professional workshops. Practical handling and care for longer tool life Fully ground flutes and a bright finished surface aid chip evacuation and improve runout precision, but ground HSS can be more brittle than rolled variants. Use coolant for extended life when drilling deep or hard materials and avoid excessive lateral forces; stationary drilling with appropriate clamping yields the best results. For handheld operations the short design reduces vibration and improves control, while occasional resharpening restores edge quality if needed. We recommend the MetavCUT Profi Line short HSS‑G Twist Drill as the professional choice for precision metal drilling — for expert advice and technical support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48089-FDA Diameter: 8.9 mm Overall Length: 117 mm Spiral Length: 75 mm Tip Angle: 135° Type: Type N Execution: short Shaft Finish: fully ground Surface Colour: bright finished Material: HSS‑G Standard: DIN 338 For Use With: Drilling Machine (Handbohrmaschine) Model Series: Profi Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How well does the MetavCUT Twist Drill Type N perform in stainless and hard steels? The MetavCUT Twist Drill Type N with a 135° tip and HSS‑G ground geometry is designed to reduce Anbohrzeit and improve centring in harder materials; it provides faster penetration and cleaner holes in stainless and alloyed steels when used with appropriate coolant. Can the MetavCUT Twist Drill Type N be used in a handheld drill? Yes, the short design of the MetavCUT Twist Drill Type N improves stability and control in a Hand Drill, making it suitable for many on‑site and workshop tasks; however, for maximum tool life and precision, stationary drilling and cooling are recommended. What are Twist Drills used for? Twist Drills are used primarily for machining high‑strength materials and larger diameters; they are relatively easy to resharpen and withstand higher loads. The short version is particularly suited to precision work in steels and other hard materials. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills.
Body Drill (Twist Drill) by MetavCUT — HSS‑G double sided, Ø 8 mm, 135°, black finished without margin, fully ground shank, total length 79 mm, spiral length 20 mm The Body Drill (Twist Drill) is a double‑ended HSS‑G metalworking drill designed for precision holes in alloyed and unalloyed steels using a Drilling Machine. Double‑ended design for two usable tips CNC‑ground geometry for precise, clean holes 135° tip angle for hard metals like stainless steel Fully ground shank for high runout accuracy High performance drilling for demanding metalwork Designed for professionals, this HSS‑G Twist Drill delivers reliable performance when accuracy counts. The CNC‑ground flute geometry produces sharp cutting edges and reduces required feed force by up to 50% compared with conventional HSS types, which allows faster penetration and less operator fatigue. The 135° tip angle shortens start time on hard materials and improves centring on tough surfaces, making it particularly suitable for alloyed steel and cast materials. Durable design that keeps downtime low A short, double‑ended configuration provides practical resilience: if one end dulls, the bit can be reversed and reused, effectively offering two cutting tips in one tool. The fully ground shank enhances concentricity and reduces runout, resulting in cleaner holes and less rework. For stationary machining or cooled drilling cycles the construction offers consistent edge life, while the black finished surface improves corrosion resistance during storage. Practical guidance for application and tool choice This Twist Drill is optimised for metal applications such as thin sheet, rivet holes and small component bores, and it pairs best with a stable Drilling Machine at appropriate speeds and coolant. For hand‑held drills, ensure a secure chuck and controlled feed as the ground geometry is sharper and can be more brittle than rolled types. Use cutting fluid for prolonged tool life when working with stainless or tempered steels to avoid premature wear. Who benefits from this tool and how to use it safely Machinists, bodywork specialists and metal fabricators benefit most from this bit’s combination of precision and serviceability. The double‑ended design suits repetitive shop tasks where quick tip rotation reduces tool change time. When drilling, start with a light pilot feed to improve centring; the larger point angle reduces walking on hard surfaces. Follow standard safety and cooling practices to mitigate brittleness risk and extend cutting life. Strong recommendation: choose the MetavCUT Body Drill (Twist Drill) when you need precision, durability and the convenience of a double‑ended HSS‑G solution — for expert product advice and application support contact METAV Werkzeuge. Are you unsure if this tool fits your task or need further technical data? METAV Werkzeuge offers comprehensive advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Twist Drill) Brand: MetavCUT SKU: 59080-FDA Diameter: 8 mm Point angle: 135° Type: double sided (double‑ended) Colour/Finish: black finished without margin Application: Drills for metal / Drill for Metal Spiral length: 20 mm Total length: 79 mm Shank execution: fully ground Material: HSS‑G For drilling machine: Drilling Machine Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Body Drill (Twist Drill) is primarily applied to the machining of high‑strength materials and larger hole diameters; its shape allows easy resharpening and it withstands greater loads, making it suitable for alloyed and unalloyed steel, cast steel and hard plastics. Which three drill types exist? The three main drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Body Drill belongs to the metal drill category optimised for metalworking. Why are Twist Drills pointed? The point sharpening reduces the cross‑cut at the tip, lowering friction and required feed forces while improving centring in the workpiece; this is why the MetavCUT double‑ended HSS‑G bit uses a 135° point for better performance in harder materials.
Twist Drill — Short Type N, 8 mm · 135° Tip · Bright Finished · HSS-G · DIN 338 by MetavCUT The Twist Drill is a short Type N metalworking drill designed for precision drilling in steels and other hard materials with Drilling Machines. Short HSS-G body for increased stability 135° tip for clean entry in hard materials Fully ground shank for precise chucking Conforms to DIN 338 for consistent dimensions Bright finished surface for smooth chip evacuation Greater Stability and Faster Drilling for Metalworking Short design and HSS-G construction make this twist drill ideal where rigidity matters. Because the overall protrusion from the chuck is reduced, the tool shows less deflection under load, resulting in straighter holes and longer tool life when used correctly. The inherent material properties of HSS-G allow higher cutting speeds compared with conventional HSS, which translates into faster hole making and reduced machining time. For workshop and production environments this means fewer rejects and more consistent process control. Precise Entry and Reduced Burrs with a 135° Tip A 135° point angle significantly improves centring and reduces the tendency to wander on tougher surfaces. This geometry lowers the radial forces during entry, which decreases burr formation and the need for secondary deburring operations. In practice, the Type N spiral geometry combined with the larger tip angle is particularly suited to stainless steels and tempered alloys where a sharper angle would blunt quickly. For engineers and tradespeople, this results in more reproducible hole quality in demanding materials. Exact Fit and Reliable Performance from the Fully Ground Shank The fully ground cylindrical shank ensures superior concentricity in the chuck, improving runout and surface finish of the drilled hole. The fully ground shank also simplifies regrinding and refurbishment, keeping the tool serviceable over several maintenance cycles. The bright finished surface aids chip flow and inspection, helping operators spot wear earlier and maintain process stability. These features together deliver consistent results when mounted in stationary or portable drilling equipment. Optimised Dimensions and Compliance for Industrial Use With a drill Diameter of 8 mm, Spiral Length 75 mm and Overall Length 117 mm, the tool follows the short drill conventions described in DIN 338, giving compatibility with standard tool holders and replacement policies. The combination of short spiral length and robust construction suits applications on both bench and machine tools where precise, repeatable holes in metal are required. For production planners this means easier tool inventory management and predictable cycle times. Who Benefits from This Short HSS Twist Drill Workshops, toolrooms and industrial maintenance teams benefit most from a short, stable drill that performs reliably in steels, cast materials and non-ferrous metals. Because the short twist drill design reduces vibration and improves hole accuracy, it is particularly advantageous for setups with limited clearance or when working on jigged and clamped assemblies. The tool is well suited to both experienced machinists seeking predictable performance and procurement managers who prioritise conformity to standards like DIN 338. Strong recommendation: choose the MetavCUT short HSS-G Twist Drill for precise metal drilling and consult METAV Werkzeuge for tailored technical advice — Email info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill (Short Spiralbohrer) Brand: MetavCUT SKU: 48080-FDA Diameter: 8 mm Point Angle: 135° Type: Type N Material: HSS-G Execution: Short Spiral Length: 75 mm Overall Length: 117 mm Shank Finish: Fully ground Surface Finish: Bright finished For Use With: Drilling Machine (Handbohrmaschine) Standard: DIN 338 Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What makes a short twist drill different from a standard one? A short twist drill such as the MetavCUT Short Type N offers a reduced overhang and therefore higher rigidity compared with standard-length drills. This increases stability and improves hole accuracy in metalworking applications while reducing the risk of drill bending and chatter. Can the MetavCUT Twist Drill be used in a hand drilling machine? The MetavCUT Twist Drill is intended primarily for machine use, but it can be operated in heavy-duty handheld Drilling Machines when the setup is rigid and appropriate coolant is applied. For manual drilling in delicate tasks a dedicated hand-oriented bit may provide easier control. For what is a Twist Drill used? A Twist Drill is mainly used for machining high-strength materials and larger hole diameters. This form is easy to regrind and withstands considerable loads while delivering clean, precise holes suitable for subsequent tapping or finishing. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Each group is optimised for its material class and differs in point geometry, flute design and substrate material.
Spiralbohrer (8 mm, 135°, Typ N, TIN-beschichtet, kurz, DIN 338, HSS-G) - MetavCUT Profi Line Der Spiralbohrer ist ein kurzer, geschliffener HSS-G-Bohrer mit TIN-Beschichtung für präzises Bohren in legierten und unlegierten Stählen sowie Nichteisenmetallen. Kurze Ausführung für höhere Stabilität TIN-Beschichtung reduziert Reibung und Verschleiß Geschliffene Geometrie für saubere Bohrlöcher 135° Spitzenwinkel für harte Werkstoffe DIN 338 konform, Profi Line Qualität Mehr Präzision bei anspruchsvollen Metallarbeiten Dank der kurzen Ausführung reduziert sich die Auskraglänge deutlich, wodurch die Stabilität beim Bohren steigt und ein Verbiegen des Werkzeugs weniger wahrscheinlich wird. Der geschliffene Zylinderschaft sorgt für hohe Rundlaufgenauigkeit, was saubere und maßhaltige Bohrlöcher zur Folge hat. Diese Eigenschaften machen den Bohrer besonders geeignet für stationäre und handgeführte Anwendungen, bei denen Präzision zählt. Effizienteres Arbeiten durch Beschichtung und Geometrie Die TIN-Beschichtung verringert Reibung und erhöht die Wärmebeständigkeit, sodass sich die Standzeit bei Metallbearbeitung verlängert. Durch die geschliffene Schneidgeometrie ist ein bis zu 40 % schnelleres Bohren möglich, während gleichzeitig 50 % weniger Anpresskraft erforderlich wird. Bei Verwendung einer geeigneten Kühlung werden Reibung und Verschleiß zusätzlich reduziert, was insbesondere bei dauerhafter Nutzung wirtschaftliche Vorteile bringt. Optimal für typische Metallmaterialien und Anwendungen Der Bohrer eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff. Mit einem Durchmesser von 8 mm liegt das Produkt im Standard-Bereich, der sich für Werkstatt-, Montage- und DIY-Einsätze empfiehlt; handgeführte Akkubohrschrauber und Säulenbohrmaschinen sind gleichermaßen nutzbar. Für höchste Genauigkeit empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Einsatzhinweise für lange Lebensdauer und sichere Ergebnisse Für beste Ergebnisse sollten scharfe Kühlmittel und eine angemessene Schnittgeschwindigkeit eingesetzt werden; der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe und verkürzt die Anbohrzeit. Mehrstufiges Aufbohren wird bei tiefen Löchern empfohlen, um Spanbildung und Überhitzung zu vermeiden. Lagern Sie den Bohrer trocken und geschützt, um Korrosion und Beschädigungen der Schneide zu vermeiden. Empfehlung: Entscheiden Sie sich für den MetavCUT Profi Line Spiralbohrer mit TIN-Beschichtung, wenn Präzision und Standzeit bei Metallbearbeitung oberste Priorität haben — bei Fragen steht Ihnen der technische Kundenservice von METAV Werkzeuge per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 gern zur Verfügung. Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 41080-FDA Durchmesser: 8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Ausführung: kurz Schaft-Ausführung: geschliffen Material: HSS-G Farbe / Beschichtung: TIN-beschichtet Spitzenwinkel: 135° Typ: Typ N Norm: DIN 338 Modellserie: Profi Line Für Bohrmaschine: Handbohrmaschine Geeignet für: legierter Stahl, unlegierter Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze, Hartkunststoff Hinweis: Geschliffener HSS-Bohrer für präzise Bohrungen; bei Kühlung geringerer Verschleiß Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der MetavCUT Spiralbohrer geeignet? Der MetavCUT Spiralbohrer ist für legierten und unlegierten Stahl sowie für Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff geeignet und bietet durch die TIN-Beschichtung längere Standzeiten bei Metallbearbeitung. Kann ich den Spiralbohrer von MetavCUT in einer Handbohrmaschine verwenden? Ja, der MetavCUT Spiralbohrer mit 8 mm Durchmesser und geschliffenem Schaft ist für den Einsatz in Handbohrmaschinen geeignet; für beste Präzision empfiehlt sich jedoch Anpunkten und gegebenenfalls die Nutzung einer Führung oder Säulenbohrmaschine. Warum ist die TIN-Beschichtung bei diesem Spiralbohrer vorteilhaft? Die TIN-Beschichtung des MetavCUT Spiralbohrers reduziert Reibung und Wärmeentwicklung, was die Standzeit erhöht und bessere Schnittleistungen insbesondere beim Bohren harter Werkstoffe ermöglicht. Entspricht der Spiralbohrer der Norm DIN 338 und welche Bedeutung hat das? Ja, der MetavCUT Spiralbohrer entspricht der Norm DIN 338, was die Klassifizierung als kurzer geschliffener Spiralbohrer mit Zylinderschaft bestätigt und für standardisierte Qualität und Kompatibilität mit gängigen Aufnahmen steht. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#41080-FDA","sku":"41080-FDA","mpn":"41080-FDA","name":"Spiralbohrer 41080-FDA","description":"Kurzer, geschliffener HSS‑G Spiralbohrer mit TIN‑Beschichtung für präzises Bohren in legierten und unlegierten Stählen sowie Nichteisenmetallen; 8 mm Durchmesser, 135° Spitzenwinkel, Typ N, DIN 338, Spirallänge 75 mm, Gesamtlänge 117 mm","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"8 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe / Beschichtung","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Hinweis","value":"Geschliffener HSS‑Bohrer für präzise Bohrungen; bei Kühlung geringerer Verschleiß"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der MetavCUT Spiralbohrer geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer ist für legierten und unlegierten Stahl sowie für Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff geeignet und bietet durch die TIN‑Beschichtung längere Standzeiten bei Metallbearbeitung."}},{"@type":"Question","name":"Kann ich den MetavCUT Spiralbohrer in einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer mit 8 mm Durchmesser und geschliffenem Schaft ist für den Einsatz in Handbohrmaschinen geeignet; für höchste Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer oder die Nutzung einer Führung bzw. Säulenbohrmaschine."}},{"@type":"Question","name":"Welche Vorteile bietet die TIN‑Beschichtung beim MetavCUT Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Die TIN‑Beschichtung reduziert Reibung und Wärmeentwicklung, erhöht die Wärmebeständigkeit und verlängert dadurch die Standzeit des MetavCUT Spiralbohrers insbesondere beim Bohren harter Werkstoffe."}},{"@type":"Question","name":"Entspricht der MetavCUT Spiralbohrer der DIN 338 und was bedeutet das?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer entspricht der Norm DIN 338, was die Klassifizierung als kurzer geschliffener Spiralbohrer mit Zylinderschaft bestätigt und standardisierte Qualität sowie Kompatibilität mit gängigen Aufnahmen gewährleistet."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/41080-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Profi Line"},{"@type":"Thing","name":"HSS‑G geschliffen"},{"@type":"Thing","name":"TIN‑beschichtet für längere Standzeit"}],"mentions":[{"@type":"Thing","name":"DIN 338 Norm"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Geeignet für legierten und unlegierten Stahl"}]}]}
Spiralbohrer — Kurz, HSS-G, 9,1 mm, 135°, Typ N, blank, geschliffen, DIN 338 Der Spiralbohrer ist ein kurzer HSS-G-Bohrer (Typ N) für präzise Metallbohrungen mit 9,1 mm Durchmesser und 135° Spitzenwinkel. Kurze Ausführung für hohe Stabilität HSS-G geschliffen: präzise Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe Norm DIN 338: industrielle Qualität Bis zu 40 % schnelleres Bohren, weniger Kraftaufwand Hohe Effizienz bei Metallbearbeitung dank optimierter Geometrie Mit dem Spiralbohrer aus der Profi Line lassen sich Bohrungen in Stahl und Guss deutlich effizienter ausführen. Die geschliffene Geometrie (HSS-G) sorgt für scharfe Schneiden und sauberen Spanabtrag, sodass die Arbeitszeit bei vergleichbaren Anwendungen reduziert wird. Für handgeführte und stationäre Maschinen bietet die kurze Ausführung eine geringere Auskraglänge, was zu höherer Stabilität und besserer Maßhaltigkeit der Bohrung führt. Stabilität und Präzision durch kurze Auskraglänge Weil die Auskraglänge reduziert wurde, neigt der Bohrer weniger zum Verbiegen und ermöglicht exaktere Ergebnisse. Die kürzere Spirallänge verbessert die Rundlaufgenauigkeit und minimiert Vibrationen, was besonders bei harten Werkstoffen wie legiertem Stahl oder Gusseisen von Vorteil ist. Dadurch lassen sich Passungen und Bohrbilder mit höherer Wiederholgenauigkeit erzielen, was die Nacharbeit reduziert. Materialgerecht und vielseitig einsetzbar Aufgrund des Spitzenwinkels von 135° und der Typ-N-Spirale eignet sich dieser Bohrer besonders für legierte und unlegierte Stahlarten, Gussstahl und Nichteisenmetalle. HSS-G steht für geschliffenen Schnellarbeitsstahl, der eine hohe Schnittfestigkeit bietet; erklärt heißt das: Geschliffene Bohrer haben sehr scharfe Kanten und erzeugen sauberere Löcher, benötigen jedoch oft Kühlung und eine stationäre Aufnahme für maximale Lebensdauer. Anwendungsempfehlung und Zielgruppe Dieser kurze Spiralbohrer richtet sich an Handwerker, Werkstätten und industrielle Anwender, die präzise Metallbohrungen ausführen. Bei Verwendung in Handbohrmaschinen ist auf korrekten Rundlauf und angemessene Kühlung zu achten. Für tiefere Löcher oder sehr harte Materialien empfiehlt sich schrittweises Vorbohren oder eine stationäre Bohrmaschine, um optimale Ergebnisse zu erzielen. Empfehlung: Der Einsatz des MetavCUT Profi Line Spiralbohrers ist besonders ratsam, wenn Stabilität und Präzision im Vordergrund stehen — bei Fragen berät METAV Werkzeuge gern persönlich per eMail (info@metav-werkzeuge.com) oder Telefon (+49 2822 7131930) Bezeichnung: Spiralbohrer Marke/Hersteller: MetavCUT SKU: 48091-FDA Durchmesser: 9,1 mm Spitzenwinkel: 135° Typ: Typ N (Normalspirale) Material: HSS-G (geschliffen) Schaft Ausführung: geschliffen, Zylinderschaft Ausführung: kurz Farbe: blank Gesamtlänge: 125 mm Spirallänge: 81 mm Norm: DIN 338 Anwendung: Bohren in legierten und unlegierten Stählen, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff Für Bohrmaschine: Handbohrmaschine, stationäre Werkzeugmaschinen empfohlen Modellserie: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien eignet sich der Spiralbohrer von MetavCUT am besten? Der MetavCUT Spiralbohrer (Typ N, HSS-G) eignet sich vor allem für legierte und unlegierte Stähle, Gussstahl sowie Nichteisenmetalle; bei härteren Werkstoffen empfiehlt sich Kühlung und eine stationäre Aufnahme. Kann der kurze Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der kurze Spiralbohrer ist für Handbohrmaschinen geeignet, wobei auf guten Rundlauf und kontrollierte Vorschubkräfte geachtet werden sollte, um Bruch und Werkzeugverschleiß zu vermeiden. Was bedeutet HSS-G beim MetavCUT Spiralbohrer und welche Vorteile bringt das? HSS-G steht für geschliffenen Schnellarbeitsstahl; beim MetavCUT Spiralbohrer sorgt dies für sehr scharfe Schneiden, hohe Maßgenauigkeit und saubere Bohrlöcher, erfordert aber häufig Kühlung und eine präzise Werkzeugaufnahme. Warum ist die kurze Ausführung beim MetavCUT Profi Line wichtig? Die kurze Ausführung reduziert die Auskraglänge, erhöht die Stabilität und verbessert die Rundlaufgenauigkeit, wodurch präzisere Bohrungen und geringere Vibrationen bei Metallarbeiten erzielt werden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48091-FDA","sku":"48091-FDA","mpn":"48091-FDA","name":"Spiralbohrer 48091-FDA","description":"Kurzer HSS-G Spiralbohrer Typ N, Durchmesser 9,1 mm, Spitzenwinkel 135°, Zylinderschaft geschliffen, blank, DIN 338; geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; hohe Stabilität durch kurze Auskraglänge und präzise geschliffene Geometrie.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"9,1 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Material","value":"HSS-G (geschliffen)"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen, Zylinderschaft"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"125 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"81 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohren in legierten und unlegierten Stählen, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine, stationäre Werkzeugmaschinen empfohlen"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Preis Netto","value":"7.53 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien eignet sich der Spiralbohrer von MetavCUT am besten?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer Typ N HSS-G eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen sowie Nichteisenmetalle; bei härteren Werkstoffen empfiehlt sich Kühlung und stationäre Aufnahme."}},{"@type":"Question","name":"Kann der kurze Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurze Spiralbohrer von MetavCUT kann in Handbohrmaschinen eingesetzt werden; auf guten Rundlauf, kontrollierte Vorschubkräfte und gegebenenfalls Kühlung achten, um Bruch und erhöhten Verschleiß zu vermeiden."}},{"@type":"Question","name":"Was bedeutet HSS-G beim MetavCUT Spiralbohrer und welche Vorteile bringt das?","acceptedAnswer":{"@type":"Answer","text":"HSS-G steht für geschliffenen Schnellarbeitsstahl; beim MetavCUT Spiralbohrer sorgt dies für sehr scharfe Schneiden, hohe Rundlaufgenauigkeit und saubere Bohrlöcher, erfordert aber häufig Kühlung und präzise Werkzeugaufnahme."}},{"@type":"Question","name":"Warum ist die kurze Ausführung beim MetavCUT Profi Line wichtig?","acceptedAnswer":{"@type":"Answer","text":"Die kurze Ausführung reduziert die Auskraglänge, erhöht die Stabilität und verbessert die Maßhaltigkeit der Bohrung, wodurch Vibrationsneigung und Nacharbeit bei Metallbohrungen verringert werden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/product/48091-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurzbauform"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"Norm DIN 338"},{"@type":"Thing","name":"Typ N Normalspirale"}],"mentions":[{"@type":"Thing","name":"MetavCUT Profi Line"},{"@type":"Thing","name":"Zylinderschaft geschliffen"},{"@type":"Thing","name":"Einsatz in Stahl und Guss"},{"@type":"Thing","name":"Kühlung empfohlen für harte Werkstoffe"}]}]}
Spiralbohrer kurz Ø 9,2 mm | 135° Spitzenwinkel | Typ N | blank | geschliffen | DIN 338 | HSS-G — Marke MetavCUT Der Spiralbohrer in Kurz-Ausführung ist ein HSS-G Metallbohrer für präzise Bohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen. Kurz-Ausführung für bessere Stabilität Geschliffene HSS-G-Geometrie für saubere Bohrlöcher 135° Spitzenwinkel für harte Werkstoffe DIN 338 Norm, Zylinderschaft, Typ N Geeignet für Handbohrmaschine und stationäre Maschinen Präzise Metallbohrungen mit messbarem Effizienzvorteil Die geschliffene HSS-G-Geometrie sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Metallen ermöglicht. Durch den gezielten Schliff ist ein bis zu 40 % schnelleres Bohren sowie 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern erreichbar, sodass Arbeitszyklen verkürzt und Ermüdungserscheinungen bei Bedienern reduziert werden. Diese Eigenschaft bringt klare Produktivitätsvorteile bei Serien- und Einzelbearbeitungen. Kürzere Auskraglänge erhöht Stabilität und Genauigkeit Die Kurz-Ausführung reduziert die Auskraglänge und minimiert damit Vibrationen sowie das Verbiegen des Bohrers. Bei einer Spirallänge von 81 mm und einer Gesamtlänge von 125 mm bietet die Konstruktion bessere Führung bei Hand- und Maschinenanwendungen. Der geschliffene Zylinderschaft ist für präzise Spannfutter geeignet; geschliffene Werkzeuge erzeugen exaktere Bohrbilder, sind jedoch empfindlicher gegen Stoßbeanspruchung und profitieren von Kühlschmierstoff bei harten Werkstoffen. Vielseitiger Einsatz im Standard-Bereich für Werkstatt und Industrie Mit einem Durchmesser von 9,2 mm liegt der Bohrer im Standard-Bereich (2,0–13,0 mm) und eignet sich für Werkstattarbeiten, Montageaufgaben und viele DIY-Projekte. Die Typ-N-Normalspirale ist besonders geeignet für Stahl, Gusswerkstoffe und Nichteisenmetalle; dünne bis mittlere Bleche und Profile lassen sich zuverlässig bearbeiten. Für exakte Passungen empfiehlt sich zuvor ein Zentrierbohrer, um das Wandern beim Anbohren zu vermeiden. Anwendungsempfehlungen für lange Standzeit und sicheres Arbeiten Für langlebige Ergebnisse empfiehlt sich die Verwendung von Kühlschmierstoff bei gehärteten Materialien sowie angepasste Schnittgeschwindigkeit und moderater Vorschub. Bei stationärer Bearbeitung erzielt der Bohrer die beste Leistung; in Handgeräten sorgt die kurze Ausführung für höhere Kontrolle. Die Einordnung nach DIN 338 garantiert Kompatibilität mit gängigen Zylinderschaft-Aufnahmen und erleichtert die Auswahl passender Spannmittel. Vertrauen Sie auf die Profi Line von MetavCUT für effiziente Metallbearbeitung und kontaktieren Sie METAV Werkzeuge bei Fragen unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 für kompetente Beratung. Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 48092-FDA Durchmesser: 9,2 mm Spitzenwinkel: 135° Ausführung: kurz Material: HSS-G Schaft Ausführung: geschliffen Spirallänge: 81 mm Gesamtlänge: 125 mm Typ: Typ N Norm: DIN 338 Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie gut eignet sich der Spiralbohrer von MetavCUT für Edelstahl? Der Spiralbohrer von MetavCUT in HSS-G-Ausführung mit 135° Spitzenwinkel ist speziell auf harte Werkstoffe ausgelegt und eignet sich gut für Edelstahl, sofern Kühlschmierstoff und angepasste Schnittparameter verwendet werden. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz in Handbohrmaschinen geeignet; die kurze Ausführung erhöht dabei die Stabilität und verringert das Risiko von Verkantungen. Warum ist der Spiralbohrer geschliffen und welche Vorteile bringt das? Die geschliffene Fertigung des Spiralbohrers von MetavCUT erzeugt sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; als Nachteil ist die höhere Sprödigkeit zu beachten. Brauche ich ein Vorbohren mit dem Spiralbohrer von MetavCUT bei 9,2 mm? Bei einem Durchmesser von 9,2 mm ist direktes Bohren üblich; für höchste Präzision oder bei empfindlichen Werkstücken empfiehlt MetavCUT jedoch ein Anpunkten mit Zentrierbohrer zur besseren Führung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48092-FDA","sku":"48092-FDA","mpn":"48092-FDA","name":"Spiralbohrer 48092-FDA","description":"Spiralbohrer kurz Ø 9,2 mm, 135° Spitzenwinkel, Typ N, blank, geschliffen, DIN 338, HSS-G – Kurz-Ausführung für höhere Stabilität und präzise Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"48092-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"9,2 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"81 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"125 mm"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"5"},{"@type":"PropertyValue","name":"Preis Netto","value":"7.53 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie gut eignet sich der Spiralbohrer von MetavCUT für Edelstahl?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT in HSS-G-Ausführung mit 135° Spitzenwinkel ist für harte Werkstoffe wie Edelstahl geeignet; empfohlen werden Kühlschmierstoff und angepasste Schnittparameter."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT eignet sich für Handbohrmaschinen; die kurze Ausführung erhöht die Stabilität und verringert das Risiko von Verkantungen."}},{"@type":"Question","name":"Warum ist der Spiralbohrer geschliffen und welche Vorteile bringt das?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Fertigung des Spiralbohrers von MetavCUT erzeugt sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu sauberen Bohrlöchern führt; als Nachteil ist eine höhere Sprödigkeit zu beachten."}},{"@type":"Question","name":"Brauche ich ein Vorbohren mit dem Spiralbohrer von MetavCUT bei 9,2 mm?","acceptedAnswer":{"@type":"Answer","text":"Bei einem Durchmesser von 9,2 mm ist direktes Bohren üblich; für höchste Präzision oder empfindliche Werkstücke empfiehlt MetavCUT ein Anpunkten mit Zentrierbohrer zur besseren Führung."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/48092-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz-Ausführung"},{"@type":"Thing","name":"HSS-G geschliffen für Metall"},{"@type":"Thing","name":"DIN 338 Klassifikation"}],"mentions":[{"@type":"Thing","name":"Einsatz in Handbohrmaschine"},{"@type":"Thing","name":"Kühlschmierstoff empfohlen"},{"@type":"Thing","name":"Zentrierbohrer für höchste Präzision"}]}]}
Spiralbohrer 9,3 mm – kurz, HSS‑G, 135°, Typ N, blank, DIN 338, Profi Line von MetavCUT Der Spiralbohrer ist ein kurzer HSS‑G Metallbohrer für präzise Bohrungen in legierten und unlegierten Stahl sowie Gusswerkstoffe. Für legierten und unlegierten Stahl geeignet Geschliffene Ausführung für saubere Bohrlöcher Kürzere Auskraglänge für höhere Stabilität 135° Spitzenwinkel für harte Werkstoffe Norm DIN 338 und Profi Line Qualität Höhere Präzision durch kurze Bauweise und geschliffene Geometrie Die kurze Ausführung dieses Spiralbohrers reduziert die Auskraglänge und minimiert so Vibrationen und Verbiegen während des Bohrens. Die geschliffene HSS‑G‑Geometrie sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere, maßhaltige Bohrlöcher in Stahl, Gusseisen und Nichteisenmetallen ermöglicht. Besonders bei stationären Maschinen oder kontrollierten Handbohrungen führt dies zu reproduzierbaren Ergebnissen und reduziert Nacharbeit. Effizienteres Arbeiten dank optimierter Schneidkante Durch den speziellen Schliff arbeitet der Bohrer deutlich kraftschonender: Bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Bohrern ermöglicht höhere Produktivität bei reduzierter Belastung von Maschine und Anwender. Der 135° Spitzenwinkel verbessert das Anbohrverhalten bei harten Werkstoffen und verringert das Auswandern des Bohrers beim Ansetzen, sodass präzise Zentrierungen seltener erforderlich sind. Robuste Einsatzbereiche und Hinweise zur Anwendung Der Spiralbohrer vom Typ N ist ausgelegt für das Bohren in Stahl, Temperguss, Gusseisen und Hartkunststoff. Die Kombination aus HSS‑G und geschliffenem Schaft bietet hohe Standzeit bei korrekter Kühlung; ohne Kühlung steigt das Risiko von Überhitzung und Sprödbruch. Die Ausführung „kurz“ macht den Bohrer besonders geeignet für präzise Arbeiten und Anwendungen mit begrenzter Auslage, während bei tieferen Löchern mehrstufiges Aufbohren empfohlen wird. Passende Maschinen und Einsatzempfehlung Dieser Spiralbohrer ist für den Einsatz in Handbohrmaschinen sowie stationären Bohrmaschinen geeignet; bei handgeführten Geräten auf ruhigen Anpressdruck und konstante Drehzahl achten. Für maximale Lebensdauer empfiehlt sich der Einsatz von Kühlschmierstoff und kontrolliertes Vorschubverhalten. Die Norm DIN 338 gewährleistet zudem reproduzierbare Abmessungen und Kompatibilität mit gängigen Zylinderschaft‑Aufnahmen. Empfehlung: Für anspruchsvolle Metallbearbeitung die Profi Line Spiralbohrer von MetavCUT wählen — bei Unsicherheiten oder technischen Fragen berät METAV Werkzeuge gern persönlich per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 48093-FDA Durchmesser: 9,3 mm Spirallänge: 81 mm Gesamtlänge: 125 mm Material: HSS-G Schaft Ausführung: geschliffen Ausführung: kurz Typ: Typ N Spitzenwinkel: 135° Farbe: blank Norm: DIN 338 Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Spiralbohrer, Typ N) mit 135° Spitzenwinkel ist für härtere Werkstoffe besser geeignet als ein 118°‑Bohrer; bei rostfreiem Edelstahl sollte jedoch langsame Schnittgeschwindigkeit und ausreichende Kühlung eingesetzt werden, um Überhitzung zu vermeiden. Kann der geschliffene HSS‑G Spiralbohrer in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz in Handbohrmaschinen geeignet; aufgrund der geschliffenen Ausführung wird jedoch kontrollierter Anpressdruck und Kühlschmierstoff empfohlen, um Bruchrisiken zu minimieren. Warum ist die kurze Ausführung des Spiralbohrers vorteilhaft? Die kurze Ausführung des Spiralbohrers von MetavCUT reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren, was besonders bei präzisen Metallbohrungen zu saubereren Ergebnissen und geringerem Werkzeugversatz führt. Welche Vorteile bietet die Norm DIN 338 für diesen Bohrer? Die Einhaltung der Norm DIN 338 garantiert beim Spiralbohrer von MetavCUT standardisierte Maße und Aufnahmen, wodurch Austauschbarkeit und Kompatibilität mit gängigen Spannfuttern und Bohrvorrichtungen sichergestellt sind. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48093-FDA","sku":"48093-FDA","mpn":"48093-FDA","name":"Spiralbohrer 48093-FDA","description":"Spiralbohrer 9,3 mm, kurz, HSS-G, geschliffen, 135° Spitzenwinkel, Typ N, blank, DIN 338; Profi Line Bohrer von MetavCUT für präzise Metallbohrungen in legiertem und unlegiertem Stahl sowie Gusswerkstoffen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"9,3 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"81 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"125 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 9,3 mm von MetavCUT, Typ N mit 135° Spitzenwinkel, eignet sich für härtere Werkstoffe; bei rostfreiem Edelstahl sollten langsame Schnittgeschwindigkeit und ausreichende Kühlung eingesetzt werden, um Überhitzung zu vermeiden."}},{"@type":"Question","name":"Kann der geschliffene HSS-G Spiralbohrer in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 9,3 mm von MetavCUT kann in Handbohrmaschinen verwendet werden; wegen der geschliffenen Ausführung empfiehlt sich kontrollierter Anpressdruck und der Einsatz von Kühlschmierstoff, um Bruchrisiken zu minimieren."}},{"@type":"Question","name":"Warum ist die kurze Ausführung des Spiralbohrers vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Die kurze Ausführung des Spiralbohrers 9,3 mm von MetavCUT reduziert die Auskraglänge, erhöht die Stabilität und minimiert Vibrationen, was zu saubereren und maßhaltigeren Bohrlöchern führt."}},{"@type":"Question","name":"Welche Vorteile bietet die Norm DIN 338 für diesen Bohrer?","acceptedAnswer":{"@type":"Answer","text":"Die Norm DIN 338 gewährleistet beim Spiralbohrer 9,3 mm von MetavCUT standardisierte Maße und Aufnahmen, wodurch Austauschbarkeit und Kompatibilität mit gängigen Spannfuttern und Bohrvorrichtungen sichergestellt sind."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/48093-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz Ausführung"},{"@type":"Thing","name":"HSS-G Geschliffener Metallbohrer"},{"@type":"Thing","name":"DIN 338 Norm Kurze Spiralbohrer"}],"mentions":[{"@type":"Thing","name":"Profi Line Modellserie"},{"@type":"Thing","name":"Handbohrmaschine geeignet"},{"@type":"Thing","name":"Kühlschmierstoff empfohlen"}]}]}
Twist Drill Profi Line 9.4 mm (Type N) – HSS-G, 135°, Bright Finished, Fully Ground, Short A short Twist Drill engineered for precise metalworking, combining a 135° tip and HSS‑G ground geometry for stable, clean holes in hard materials. Short design for increased stability and precision 135° tip angle for easier penetration in hard materials HSS‑G ground for sharp edges and high runout accuracy Type N spiral optimized for metal drilling Conforms to DIN 338 for short twist drills Higher Throughput and Lower Effort through Ground HSS Design Dank der HSS‑G Ausführung produziert dieser kurze Bohrer besonders scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt. Die geschliffene Geometrie ermöglicht ein bis zu 40% schnelleres Bohren bei gleichzeitig 50% geringerem Anpressdruck gegenüber herkömmlichen HSS‑Bohrern. Das Resultat ist eine spürbare Zeitersparnis bei Serien- und Präzisionsarbeiten sowie reduzierte Ermüdung des Bedieners und der Maschine. Robustes Design für anspruchsvolle Metallbearbeitung Diese Ausführung mit Type N Normalspirale wurde gezielt für die Bearbeitung von Stahl und Eisen entwickelt und eignet sich für legierte sowie unlegierte Stähle, Gusswerkstoffe, Sintereisen, Nichteisenmetalle und Hartkunststoffe. Die kurze Spiral‑Länge erhöht die Stabilität und vermindert das Abknicken, sodass das Werkzeug auch bei anspruchsvollen Drilling Machine‑Anwendungen präzise arbeitet. Dadurch entsteht ein klarer Vorteil bei harten Werkstoffen und engen Toleranzen. Präzise Anbohrung dank 135° Spitzenwinkel Der 135° Spitzenwinkel reduziert die Anbohrzeit in harten Materialien und verringert die Tendenz zum „Wandern“ der Spitze beim Ansetzen. Das Ergebnis sind besser zentrierte, maßhaltige Bohrungen mit geringerem Gratbild. Für Anwender bedeutet das weniger Nacharbeit, höhere Teilequalität und verlässlichere Ergebnisse bei tiefen oder schwierigen Bohrungen. Normkonformität und Einsatzgebiet für Profis Gefertigt nach DIN 338 als kurzer Spiralbohrer mit Zylinderschaft bietet die Profi Line reproduzierbare Qualität und Kompatibilität mit gängigen Spannfuttern. Die Kombination aus Bright Finished Oberfläche und fully ground Schaft sorgt für sichere Aufnahme und einfache Nachbearbeitung. Diese Bauform richtet sich an Werkstätten, industrielle Fertigung und Anwender, die wiederholt präzise Metallbohrungen benötigen. I recommend the MetavCUT Profi Line Twist Drill for demanding metalworking applications — for expert advice or to check whether this drill meets your technical requirements contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48094-FDA Diameter: 9.4 mm Spiral Length (Flute): 81 mm Overall Length: 125 mm Tip Angle: 135° Type: Type N Execution: Short Material: HSS-G Shaft Finish: Fully ground Colour / Surface: Bright Finished For Drill Machine: Drilling Machine Application: Drills for metal Model Series: Profi Line Standard: DIN 338 Packaging Unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit them best? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger bore diameters. Its short, ground form is easy to resharpen and withstands greater loads, making it suitable for metalwork including alloyed and unalloyed steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Which three drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Masonry/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimized for those applications.
Twist Drill (Type N) – Short HSS‑G, 9.5 mm, 135°, Profi Line, Bright Finished, Fully Ground Shank, DIN 338 The Twist Drill Type N short HSS‑G is a precision metalworking drill for drilling machines, engineered for stable, fast and accurate holes in hard materials. Short HSS‑G design for increased stability 9.5 mm diameter for precise metal holes 135° point angle for hard materials Fully ground shank for low runout Complies with DIN 338; Profi Line by MetavCUT Faster, more stable drilling in metalwork The Twist Drill from the MetavCUT Profi Line uses HSS‑G material and a short design to reduce overhang and vibration, delivering higher stability than standard drills. This construction enables up to 40% faster penetration and requires around 50% less feed force compared with conventional HSS tools, so holes in alloyed or unalloyed Steel and Cast materials are produced more efficiently. The direct result is shorter cycle times in workshop or production environments without sacrificing accuracy. Designed for hard materials and clean hole entry A 135° point angle and the Type N normal spiral geometry provide optimal entry behaviour in tougher materials such as Stainless Steel and Tempered Castings. The larger point angle shortens initial bite and reduces the tendency to skate on the surface, which improves centring and reduces chatter when starting a hole. For users unfamiliar with drill geometry: a greater point angle gives a flatter tip that spreads cutting forces and is better suited to high‑strength metals. Ideal users and typical applications Professional workshops and precision metalworkers benefit most from this short twist drill, especially when using a drilling machine or hand drill set up for metal. Typical applications include drilling in Alloyed Steel, Cast Iron, Sintered Metals, Non‑Ferrous Metals and hard Plastics. The robust design is targeted at machinists who prioritise repeatable accuracy and minimal tool deflection during medium‑depth drilling operations. Handling, care and drilling recommendations Because the flute geometry is fully ground, the tool offers excellent cutting edges and precise runout but can be more brittle than rolled variants; coolant and correct feed rates are therefore recommended for extended tool life. For drilling tasks up to standard depths, this type of short twist drill is commonly used for diameters up to 20 mm and depths up to 100 mm. Use moderate speeds and steady feeds, ensure secure clamping, and apply cutting fluid for hard or heat‑sensitive alloys to maintain edge life and hole quality. Strong recommendation: For demanding metal drilling choose the MetavCUT Profi Line short Twist Drill — METAV Werkzeuge provides expert technical advice and support to ensure the tool meets your application needs. Contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48095-FDA Model Series: Profi Line Execution: short Material: HSS-G Diameter: 9.5 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Type: Type N Shank Execution: fully ground Colour: bright finished Application: Drills for metal Standard: DIN 338 For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily designed for metalworking and is applied to drilling high‑strength and hard materials; it performs particularly well in alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Tempered Castings and hard Plastics thanks to its HSS‑G construction and short geometry. Which three drill types are commonly distinguished? In tool selection the three main categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drills group and is optimised for those metallic materials. For what is a Twist Drill mainly used? A Twist Drill such as the MetavCUT Profi Line is mainly applied to machining high‑strength materials and larger drill diameters; its ground geometry is relatively easy to resharpen and stands up to heavier loads in demanding metalworking tasks. Why are Twist Drills pointed and what is the benefit of a 135° point? The point reduces the cross‑cut at the tip so cutting forces and friction fall, allowing lower feed forces and better centring; a 135° tip in particular shortens the initial entry time and suits harder materials by distributing cutting loads more favourably.
Twist Drill (Spiralbohrer) — MetavCUT Profi Line, HSS‑G short, 9.5 mm, 135° tip, TIN‑coated The Twist Drill (Spiralbohrer) is a short Type N HSS‑G metal drill designed for stable, precise drilling in steels and non‑ferrous metals with a 9.5 mm diameter and a 135° tip angle. Short design for increased stability HSS‑G fully ground for precise holes TIN‑coated for prolonged tool life Optimised for Metal drilling machines Complies with DIN 338 standards Precise metalworking thanks to a short, stable design The MetavCUT Profi Line short twist drill delivers higher stability during the cut because the reduced overhang minimises deflection and vibration. For users who value repeatable accuracy, this short design reduces the tendency to wander and helps achieve cleaner hole geometry. The TIN‑coated surface lowers friction and heat, which directly prolongs tool life and maintains hole quality when machining Alloyed and Unalloyed Steel. Faster penetration and lower feed force from ground geometry A fully ground HSS‑G flute geometry ensures a sharp cutting edge and excellent concentricity, allowing up to 40 % faster drilling rates and significantly reduced required thrust compared with conventional rolled drills. The 135° tip angle is optimised for harder materials, shortening initial entry and improving centring on tough workpieces. This combination of features supports efficient workflows on both stationary and portable drilling machines. Broad material compatibility and recommended uses This Type N short Twist Drill is suitable for a wide range of metals: tempered cast iron, copper, bronze, Sintered Iron and many steels. It is recommended for drilling where precision and tool life matter most, for example tooling, maintenance and parts production. When machining stainless or high‑strength alloys, use appropriate coolant to maximise the advantage of the TIN‑coating and prevent thermal wear. Who benefits most — from workshops to professional service teams Engineers, toolroom technicians and maintenance teams benefit from the combination of strength and precision offered by this short HSS‑G drill. The design reduces breakage risk during demanding, repetitive tasks when used with correct clamping and coolant. For applications requiring fine hole tolerances and repeatability, this twist drill provides a reliable solution that balances speed, life and accuracy. Choose the MetavCUT Profi Line Twist Drill for demanding metalworking tasks and contact METAV Werkzeuge for expert advice — they provide comprehensive technical consultation and support by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical Information Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 41095-FDA Execution: short Diameter: 9.5 mm Total length: 125 mm Spiral length: 81 mm Tip angle: 135° Type: Type N Shaft finish: fully ground Coating / Colour: TIN-coated Material: HSS-G Model series: Profi Line Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what are Twist Drills used? Twist Drills such as the MetavCUT Twist Drill are primarily used for machining high‑strength materials and larger hole diameters. They are suitable for demanding metalworking where the shape allows straightforward resharpening and where the drill must withstand higher loads. Which three drill types exist? The basic distinction is between Metal drill (e.g. HSS or HSS‑G types like the MetavCUT Twist Drill), Wood drill, and Masonry/Concrete drill. Each type is optimised in flute geometry and tip design for its specific material family.
Spiralbohrer von MetavCUT — 9,6 mm, 135°, Typ N, blank, kurz, DIN 338, HSS‑G Der Spiralbohrer von MetavCUT ist ein kurzer HSS‑G Metallbohrer für präzise Bohrungen in legierten und unlegierten Stahl bei stationären und handgeführten Maschinen. Spiralbohrer von MetavCUT, kurze Ausführung HSS-G Geschliffener Zylinderschaft für präzisen Rundlauf Spitzenwinkel 135° reduziert Anbohrkraft bei Stahl DIN 338 konform, ideal für stationäre Metallbearbeitung Mehr Leistung bei reduziertem Kraftaufwand Die HSS‑G Ausführung dieses Kurzbohrers kombiniert hohe Schnitthaltigkeit mit feiner Schneidengeometrie. Durch den CNC‑geschliffenen Spanraum lassen sich Bohrungen bis zu 40 % schneller realisieren und es wird dabei rund 50 % weniger Anpresskraft benötigt, verglichen mit herkömmlichen HSS‑Bohrern. Die Spirallänge 87 mm und die Gesamtlänge 133 mm sorgen in der kurzen Ausführung für eine stabile Schnittführung und damit für weniger Ausschuss und Nacharbeit. Bessere Einbohrkontrolle in harten Werkstoffen Der 135° Spitzenwinkel wurde gewählt, um das Anbohren in harten Werkstoffen wie Edelstahl und Temperguss zu erleichtern. Ein größerer Spitzenwinkel verringert das Wandern beim Anbohren und reduziert das Aufrauen der Bohrlochkante. Bei Bedarf empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um Rundlauf und Passgenauigkeit weiter zu erhöhen. Die Typ‑N Normalspirale ist speziell für Metallbohrungen ausgelegt und bietet eine bewährte Spanabfuhr. Vielseitiger Einsatz für Werkstatt und Produktion Als Vertreter des Standard‑Bereichs eignet sich dieser Kurzbohrer für Werkstattarbeiten, Montage und anspruchsvolle DIY‑Projekte. Der geschliffene Zylinderschaft ermöglicht sauberen Rundlauf in Handbohrmaschinen und stationären Säulenbohrern, wobei für sehr tiefe Bohrungen über das Fünffache des Durchmessers schrittweises Aufbohren empfohlen wird. Die Einordnung nach DIN 338 garantiert Normkonformität und erleichtert die Auswahl passender Spannmittel und Aufnahmen. Entscheiden Sie sich für die Präzision der MetavCUT Profi Line und wählen Sie den Spiralbohrer in HSS‑G mit 135° Spitzenwinkel für zuverlässige Metallbohrungen; bei Fragen berät METAV Werkzeuge gern persönlich per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 48096-FDA Material: HSS-G Typ: Typ N Durchmesser: 9,6 mm Farbe: blank Ausführung: kurz Schaft Ausführung: geschliffen Spirallänge: 87 mm Gesamtlänge: 133 mm Spitzenwinkel: 135° Norm: DIN 338 Modellserie: Profi Line Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑G mit 135° Spitzenwinkel eignet sich besonders für härtere Werkstoffe wie Edelstahl; der größere Spitzenwinkel erleichtert das Anbohren und verbessert die Kontrolle beim Vorschub. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT wurde als kurze Ausführung mit geschliffenem Zylinderschaft entwickelt und eignet sich sowohl für Handbohrmaschinen als auch für stationäre Säulenbohrer, solange die Maschine ausreichend Steifigkeit bietet. Welche Vorteile bietet die geschliffene Ausführung beim Spiralbohrer von MetavCUT? Die geschliffene Fertigung beim Spiralbohrer von MetavCUT sorgt für sehr scharfe Schneiden, hohe Rundlaufgenauigkeit und saubere Bohrlöcher, weshalb sie besonders für präzise Metallbearbeitung empfohlen wird. Braucht der Spiralbohrer von MetavCUT Kühlung bei der Bearbeitung? Für die Bearbeitung von legierten Stählen und Gusseisen empfiehlt es sich, den Spiralbohrer von MetavCUT mit geeigneter Kühlschmierstoffzufuhr zu betreiben, um standzeitfördernde Temperaturkontrolle und Spanabfuhr sicherzustellen. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48096-FDA","sku":"48096-FDA","mpn":"48096-FDA","name":"Spiralbohrer 9,6 mm Typ N HSS-G","description":"Kurzer geschliffener Spiralbohrer aus HSS-G, Durchmesser 9,6 mm, Spitzenwinkel 135°, Typ N, blanke Oberfläche, Spirallänge 87 mm, Gesamtlänge 133 mm, DIN 338 konform; geeignet für präzise Metallbohrungen in legierten und unlegierten Stählen; geschliffener Zylinderschaft für präzisen Rundlauf.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Durchmesser","value":"9,6 mm"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"87 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"133 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Preis netto","value":"8.25 EUR"},{"@type":"PropertyValue","name":"uid","value":"48096-FDA"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT in HSS-G mit 135° Spitzenwinkel ist besonders für härtere Werkstoffe wie Edelstahl geeignet; der größere Spitzenwinkel erleichtert das Anbohren und verbessert die Kontrolle beim Vorschub."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT wurde als kurze Ausführung mit geschliffenem Zylinderschaft entwickelt und eignet sich sowohl für Handbohrmaschinen als auch für stationäre Säulenbohrer, sofern die Maschine ausreichend Steifigkeit bietet."}},{"@type":"Question","name":"Welche Vorteile bietet die geschliffene Ausführung beim Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Fertigung beim Spiralbohrer von MetavCUT sorgt für sehr scharfe Schneiden, hohe Rundlaufgenauigkeit und saubere Bohrlöcher, weshalb sie besonders für präzise Metallbearbeitung empfohlen wird."}},{"@type":"Question","name":"Braucht der Spiralbohrer von MetavCUT Kühlung bei der Bearbeitung?","acceptedAnswer":{"@type":"Answer","text":"Für die Bearbeitung von legierten Stählen und Gusseisen empfiehlt es sich, den Spiralbohrer von MetavCUT mit geeigneter Kühlschmierstoffzufuhr zu betreiben, um Standzeit fördernde Temperaturkontrolle und Spanabfuhr sicherzustellen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/48096-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer kurze Ausführung"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"DIN 338 Norm"}],"mentions":[{"@type":"Thing","name":"geschliffener Zylinderschaft"},{"@type":"Thing","name":"135° Spitzenwinkel"},{"@type":"Thing","name":"Spirallänge 87 mm"},{"@type":"Thing","name":"Gesamtlänge 133 mm"}]}]}
Twist Drill (Spiralbohrer) — Type N short HSS-G, Ø 9.7 mm, 135° A Twist Drill (Spiralbohrer) Type N short in HSS-G designed for precision metal drilling with a Drilling Machine Short design for higher stability and precision Fully ground geometry for clean, accurate holes 135° tip angle optimised for hard metals Up to 40% faster drilling with reduced feed force Conforms to DIN 338 for short cylinder-shank drills Precision and material advantages for demanding metalwork This short HSS-G twist drill is engineered for high-precision machining of metals where clean entry and true running are essential. Thanks to the fully ground geometry, the cutting edges are exceptionally sharp, producing clean, burr-reduced holes with consistent diameters. For demanding applications in alloyed and unalloyed steel, cast steel and non-ferrous metals, the tool delivers reliable results while preserving workpiece integrity. The compact construction reduces vibration and improves concentricity on stationary and portable machines. Short length for greater stability and faster cycles Because the drill has a reduced overall length, the exposed shank is shorter and therefore less prone to bending; this yields high stability during feed and lowers the risk of chatter. The shortened overhang contributes directly to faster, more controlled drilling—manufacturers report up to 40% faster drilling and around 50% less feed force compared with conventional HSS variants. That makes the short design particularly suitable when working with harder materials or in setups that require precise hole quality and repeatability. Tailored for metalworking professionals and specific tasks Intended primarily for metalworking, this Type N drill is excellent for tasks such as through-holes and accurate pilot holes in thicker plates and components. Users in toolrooms, maintenance shops or production lines will benefit from the drill’s balance of toughness and sharpness; it is especially appropriate for Drilling Machines and similar rotating equipment. The 135° tip angle facilitates smoother entry into hard materials like stainless steel, reducing walking at the start and enabling more consistent centring. Practical guidance, norm compliance and machining tips The product conforms to DIN 338, which standardises short cylinder-shank twist drills and clarifies manufacturing methods such as grinding versus roll-formed flutes. In practical terms, "fully ground" means the flutes and point are shaped by CNC grinding to yield higher roundness and sharper land edges; this improves hole finish but can make the tool somewhat more brittle, so use coolant and moderate speeds for best life. When referring to tip geometry, a 135° angle is chosen to reduce penetration resistance in tougher alloys and to extend tool life when cutting harder materials. Strongly recommend the MetavCUT short HSS-G Twist Drill for precise metal drilling applications — for technical questions or to confirm suitability for your project, contact METAV Werkzeuge for expert advice via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 48097-FDA Type: Type N Diameter: 9.7 mm Spiral length: 87 mm Overall length: 133 mm Tip angle: 135° Material: HSS-G Execution: short Shaft execution: fully ground Colour: bright finished For: Drilling Machine Norm: DIN 338 Model series: Profi Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (Spiralbohrer) from MetavCUT used for? The MetavCUT Twist Drill (Type N) is primarily applied to machining high-strength materials and larger drill diameters; its short design and ground geometry make it suitable for precise work in steel, cast materials and hard plastics. The shape is easy to regrind and remains stable under heavier loads. Which three drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill falls into the metal-drill category and is optimised for that application.