57mm Matrix Dot Impact Printer 1.8 L/S 40 Char Per Line, EU Power Adapter - KERN

Take advantage of the combination of printer compatibility, consistent print quality and extended roll length for uninterrupted documentation; order the paper rolls directly via Metav Werkzeuge or ask our consultants if needed Paper rolls 911-013-010 — Paper rolls for KERN printers, 57 mm width The Paper rolls 911-013-010 are standard printer rolls intended for use with compatible KERN printing devices, offering reliable media handling for weighing and receipt applications Compatible with KERN 911-013 printer 57 mm paper width for standard receipts 26 m roll length for prolonged use 55 mm roll diameter fits common holders Efficient documentation with reliable media These printer rolls deliver a dependable media format that supports clear and legible printing for weighing and labelling workflows. With a 57 mm paper width and a 26 m length per roll, the design reduces the frequency of media changes and helps maintain continuous operation in busy environments. The specified roll diameter 55 mm ensures compatibility with common printer holders, which maintains consistent paper feed and minimises jamming. This focus on operational efficiency supports predictable process throughput and reduces administrative interruptions. Less downtime, easier stock planning Longer roll length and industry-standard dimensions translate into fewer interruptions for replenishment and a simplified inventory approach. The consistent media format supports predictable consumption rates, aiding logistics and ordering cycles. Where traceability and continuous print output are required, these rolls contribute to sustained print runs and lower handling time for staff. The compatibility with KERN devices further ensures straightforward replacement without adjustments to printer settings, improving overall workflow reliability. Quality sourcing and dependable supply Sourced with a clear origin in Germany, these paper rolls are part of a supply chain that benefits from Metav Werkzeuge’s role as a quality filter for the European market. Metav’s established presence in Emmerich combines a broad product range with transparent fulfilment processes, which supports uninterrupted provision of consumables for industrial and trade customers. The combination of standardised dimensions and dependable sourcing underpins both operational continuity and procurement confidence for businesses that rely on consistent print output and stock replenishment. Contact Metav Werkzeuge to secure KERN-compatible paper supplies and ensure continuous operation from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 911-013-010 Manufacturer: KERN SKU: 911-013-010 GTIN: 4045761127135 Facts Paper width: 57 mm Roll diameter: 55 mm Roll length: 26 m Weight: 1.2 kg Tariff number: 84239010 Special features Compatible with KERN 911-013 printer Pack contents: 10 pieces Product category: Waagen › Zubehör eClass: 24260490 Origin: DE FAQ What printers are these rolls compatible with? The paper rolls 911-013-010 are specified for compatibility with KERN printing units, explicitly matching the KERN 911-013 model and similar devices designed for 57 mm media. What are the key dimensions of the rolls? Dimensions for the 911-013-010 rolls include a 57 mm paper width, 55 mm roll diameter and a roll length of 26 m, suited to standard receipt and weighing printer holders. How do these rolls affect printer downtime? By providing a longer roll length and standard dimensions, the 911-013-010 paper rolls reduce changeovers and help maintain consistent print runs, contributing to lower downtime in continuous operations. Can these rolls be stored easily in workshops? Yes; the 911-013-010 rolls use a common format that supports compact storage and straightforward rotation, aiding inventory management in workshop and industrial settings. Where do these paper rolls come from? The 911-013-010 paper rolls originate from Germany and are distributed via Metav Werkzeuge’s logistics, which focuses on reliable supply for industrial consumables. Manufacturer: KERN — Address: Germany — Contact: not provided

Take advantage of the combination of high-precision readability (0.001 g), a 400 W halogen-quartz heater and intuitive guided operation for reliable, repeatable moisture results; order the analyser directly via Metav Werkzeuge or consult our specialists for application advice. KERN DLB 160-3A Moisture Analyser — 160 g range, 0.001 g readability The KERN DLB 160-3A is a laboratory moisture analyser designed for fast, traceable moisture determination in food production, environmental testing and R&D settings. High-precision readability 0.001 g Weighing capacity 160 g 400 W halogen-quartz heater Intuitive graphic LCD, 6-language guidance Reliable moisture results with laboratory accuracy The analyser delivers repeatable results thanks to a readability of 0.001 g and a linearity of ±0.003 g, which reduces uncertainty for routine analysis. The strain gauge weighing system and stainless weighing pan guarantee stable readings during drying cycles, while the minimum sample weight of 0.02 g indicates suitability for small samples. These technical characteristics translate into fewer repeats and consistent process control when moisture content is a critical parameter. Faster workflows through guided operation and clear output An illuminated graphic LCD with 11 mm digit height and six direct keys offers a guided, step‑by‑step operator menu in six languages, reducing user error and training time. The oven unit uses a 400 W halogen‑quartz heater that reaches the selected drying profile rapidly, shortening cycle times. Integrated GLP functionality records weight values, device ID and user data for documented traceability, supporting regulatory and audit requirements. Built for safety and everyday use in busy facilities The housing combines a plastic enclosure with a stainless steel weighing plate, making the instrument easy to clean while resisting routine laboratory wear. Ten sample pans and a supplied safety hood are included for immediate use and operator protection. Automatic taring when the lid closes and the option to pause or cancel a drying cycle improve operational safety and sample handling flexibility. Practical connectivity, power and application support A built‑in power supply accepts 220–240 V AC at 50/60 Hz for plug-and-play installation. The instrument retains the last measurement on screen until a new analysis is started, avoiding accidental data loss. An application handbook is available via the download centre with examples and settings for sectors such as the food industry, water management and agricultural laboratories, helping to adapt drying programmes and interpretation without lengthy trial-and-error. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN DLB 160-3A into production or testing workflows; reach out by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for procurement and technical guidance Technical data Article number: TDLG-A SKU: DLB.160-3A GTIN: 4045761133952 Manufacturer: KERN Country of origin: CN Core data Readability: 0.001 g Weighing capacity: 160 g Minimum sample weight: 0.02 g Linearity: ± 0.003 g Reproducibility: 0.001 g Weighing pan diameter: 100 mm Display digit height: 11 mm Heater power: 400 W Drying temperature range: 35 °C–160 °C Operating humidity (max): 75% Net weight: 4.7 kg Power supply: 220 V–240 V AC, 50 Hz / 60 Hz Weighing system: Strain gauge Special features Graphic LCD display Six direct function keys Operator guidance in 6 languages (DE, EN, FR, IT, ES, PT) Automatic taring on lid close GLP internal reporting and print capability Ten sample pans included Safety hood included Housing: plastic; weighing plate: stainless steel Application handbook available in download centre Suitable application areas: food industry, environmental analysis, R&D, agriculture, water management FAQ How precise are the moisture determinations with this instrument? The KERN DLB 160-3A achieves a readability of 0.001 g and a linearity of ±0.003 g, delivering laboratory-grade precision suitable for routine moisture analysis. What temperature range can be used for drying? Drying profiles for the analyser cover 35 °C–160 °C, enabling a wide range of sample types and methods to be applied for reproducible moisture loss. Is traceable documentation available for audits? Yes. The device provides GLP‑ready internal reporting, printing Waagen‑ID, project and user IDs together with measured values for full traceability. Which materials and sample sizes are appropriate? The instrument is equipped with a 100 mm stainless steel pan and supports minimum sample weights from 0.02 g, making it suitable for small sample testing in food, environmental and research labs. What is included with delivery for immediate use? Included are ten sample pans and a safety hood; the analyser also has a built‑in power supply and comes with access to an application handbook in the download centre. Manufacturer: KERN — Origin: CN — Dealer contact: Metav Werkzeuge, Emmerich; info@metav-werkzeuge.com; +49 2822 7131930

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

Take advantage of a reliable RS-232 connection and a practical ~1.5 m cable length to ensure precise, uninterrupted data transfer between weighing instruments and PC systems; order the cable directly via Metav Werkzeuge or consult our specialists for compatibility advice. EOC-A12 Interface Cable — RS-232 connection, approx. 1.5 m (KERN) EOC-A12 Interface Cable is a dedicated RS-232 lead for integrating weighing equipment with data acquisition systems and control terminals in workshop and laboratory settings. RS-232 interface compatible Approx. 1.5 m cable length Suitable for weighing equipment Manufacturer: KERN Reliable connectivity for measurement workflows The RS-232 standard provides a stable, proven method for sending numerical measurement results from instruments to computers and printers; this connection reduces the risk of data loss during transfer and supports established serial communication protocols. Designed by KERN, the cable ensures reliable data transfer for metrology and industrial weighing applications, which helps maintain traceable records and simplifies quality control procedures. By choosing a serial interface lead, latency and compatibility issues common with improvised adapters are avoided. Simple setup that fits existing installations A cable of approx. 1.5 m balances freedom of movement and tidy installation, allowing scales and terminal units to be positioned conveniently without extra extensions. The lead is engineered for plug-and-play integration with standard serial ports used on many weighing instruments, reducing setup time and limiting the need for specialist configuration. For facilities replacing older leads, the modest length helps avoid signal degradation while enabling organised cable routing within cabinets or across workbenches. Durable design and wide equipment compatibility Constructed for routine workshop use, the connection cable combines a compact form with handling resilience appropriate for industrial environments. Its mass and construction provide stable handling during regular connection cycles and maintenance. Compatibility with weighing accessories and related scale interfaces makes this lead a practical spare part for service departments and production lines that rely on consistent measurement transfer. For procurement or technical confirmation of compatibility with specific weighing models, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 to secure the KERN RS-232 EOC-A12 cable with immediate dispatch advice Technical data SKU: EOC-A12 Manufacturer: KERN GTIN: 4045761198463 Origin: CN Commodity code: 84239010 Core specifications Weight: 0.38 kg Cable length: approx. 1.5 m eClass: 19050112 Features Interface: RS-232 Application: accessories for scales / weighing equipment Segment: Accessories, product category: Scales, product group: Cable FAQ What interface standard does the cable use? The EOC-A12 interface cable uses the RS-232 serial standard for direct instrument-to-PC communication, supplied by KERN. Is the cable suitable for industrial weighing systems? Yes, the KERN EOC-A12 connection cable is specified for use with scales and weighing equipment and is commonly employed in industrial metrology environments. What is the length of the connection lead? The connection lead measures approximately 1.5 m, providing practical reach for most bench and floor-mounted setups. Can the cable be used with older serial ports? The EOC-A12 is compatible with standard RS-232 serial ports, making it suitable for legacy interfaces often found on older instruments. How heavy is the cable and is it robust enough for workshop use? The cable has a listed weight of 0.38 kg and is designed for routine workshop handling and reliable reconnection cycles. KERN — Origin: CN — GTIN: 4045761198463

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Take advantage of reliable RS-232 data transfer and a 1.5 m cable length to integrate measurement equipment smoothly into existing workflows. Order the cable directly via Metav Werkzeuge from the Emmerich warehouse or request tailored advice from our consultants. MLB-A05 Interface Cable — RS-232 connection, 1.5 m (KERN) The MLB-A05 Interface Cable is a dedicated RS-232 connection lead for weighing instruments and laboratory balances, engineered to provide steady data transmission between measurement devices and external systems. RS-232 serial interface 1.5 m cable length Compatible with KERN balances Robust connector design Ensure accurate data logging with stable RS-232 transfer The RS-232 interface offers a proven, industry-standard method for serial data exchange, making this cable well suited to industrial metrology and laboratory environments where measurement integrity matters. By providing reliable data transfer, the cable reduces the risk of communication errors during recording and logging tasks, which in turn supports traceability and process consistency. The design supports routine integration into existing measurement setups without requiring changes to software or instrument firmware. Easy integration and clear compatibility for weighing systems With a 1.5 m lead, connection flexibility between bench instruments and nearby data terminals is increased while keeping cable routing tidy in workshop or lab setups. The cable is specified for use with RS-232-equipped devices commonly found on balances and related instruments, ensuring broad compatibility across models. Installation is straightforward: the interface lead serves as a direct conduit for serial signals, simplifying set-up procedures and reducing the need for adapters or converters in typical measurement environments. Built for dependable workshop and laboratory use The cable’s construction balances a robust connector with low weight, enabling frequent handling and routine use at weighing stations without imposing undue strain on instrument ports. The modest mass supports neat cable management and minimises mechanical load on connectors during daily operation. Sourced under the KERN product line, the accessory is intended to complement precision equipment with components that preserve uptime and support consistent measurement workflows. For reliable serial connectivity choose the KERN MLB-A05 interface cable—contact Metav Werkzeuge in Emmerich for specialist guidance or to order directly from our stock. Technical data Article number: MLB-A05 Manufacturer: KERN SKU: MLB-A05 GTIN: 4045761245204 Core data Cable length: 1.5 m Weight: 0.08 kg ECLASS: 19050112 Tariff code: 84239010 Special features Interface: RS-232 Category: Accessories for scales Origin: China FAQ What interface does this cable use? The MLB-A05 interface cable uses the RS-232 serial interface for data transfer between balances and external devices. Is the cable compatible with KERN scales? Yes, the lead is specified for compatibility with KERN weighing instruments and other devices that provide an RS-232 port. How long is the cable and how heavy is it? The cable measures 1.5 m in length and has a weight of 0.08 kg, suitable for bench-top and near-equipment routing. Can this cable be used for data logging to a PC or printer? The MLB-A05 is designed for RS-232 connections and can be used to link RS-232-capable instruments to serial printers or data acquisition systems that accept serial input. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Reliable RS-232 connectivity, Y-split capability and a compact 0.1 kg design deliver straightforward integration into weighing setups; order the KERN CCA-A01 directly via Metav Werkzeuge or consult our specialists for detailed application advice. Y-cable RS-232 CCA-A01 — KERN Y-split interface for scales The Y-cable RS-232 CCA-A01 is a compact RS-232 Y-split interface designed to link weighing instruments with multiple peripherals in industrial and workshop environments. RS-232 Y-split for parallel connections Includes interface cable for scales Compact design, weight 0.1 kg Seamless, reliable data transfer for efficient workflows The cable provides a straightforward solution for serial communication in weighing applications by using the established RS-232 protocol. As an accessory intended for balances and scales, the Y-split arrangement allows one serial output to be duplicated to two inputs where device implementations permit, helping to maintain traceable data records without repeated manual transcription. The low mass and simple form factor make mounting and routing within cabinets or on benches uncomplicated, supporting uninterrupted process flows and reducing handling time. Simple integration with existing weighing equipment Designed as an accessory in the scales category, this interface cable supports fast installation and tidy cable management in production and laboratory environments. The compact construction aids compatibility with crowded instrument panels and helps to keep data lines short and well routed, which supports signal integrity. Where system documentation is available, the KERN label and the SKU make procurement and inventory management easier for purchasing departments and stores of spare parts, promoting efficient stocking and rapid replacement when needed. Supports quality assurance and operational continuity By enabling parallel connections, the cable assists in linking a weighing instrument simultaneously to recording devices, printers or data acquisition systems, which strengthens measurement traceability and audit capability. The accessory’s design focus on function and simplicity contributes to operational uptime and consistent data capture, aligning with the demands of industrial workflows that require dependable interfaces. The compact footprint and light weight further reduce the risk of strain on connectors and fixtures, making the cable a practical component in long-term measurement setups. Contact Metav Werkzeuge today to discuss the KERN CCA-A01 RS-232 Y-cable and secure the right interface solution for your weighing processes — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and fast supply. Technical data Article number: CCA-A01 Manufacturer: KERN Origin: CN Facts Weight: 0.1 kg ECLASS: 19050111 Tariff number: 84239010 Special features Interface: RS-232 Y-split Category: Scales accessories Includes interface cable FAQ What does a Y-split RS-232 cable do? A Y-split RS-232 cable duplicates the serial signal so a single RS-232 output can be connected to two compatible inputs; the KERN CCA-A01 is intended for such parallel connections in weighing setups. Is the KERN CCA-A01 suitable for industrial balances? The CCA-A01 is produced by KERN as a scales accessory and is suitable where the balance and peripherals implement standard RS-232 signalling; compatibility should be checked against device manuals. Will the cable affect measurement accuracy? The cable itself does not change weight measurement results; using the KERN CCA-A01 simply enables simultaneous data transfer to recording or printing devices, supporting traceability without altering the instrument’s readings. How compact is the interface for panel routing? With a light design and small footprint, the cable is intended for tidy routing on benches and in instrument cabinets, helping to maintain signal integrity and neat installations. KERN — Country of origin: CN

Take advantage of a compact, cost-effective power solution that ensures stable operation for weighing equipment, with trusted KERN quality and quick dispatch from a European distribution channel; order the accessory directly via Metav Werkzeuge or contact the consultants for compatibility details. KERN Multi-plug power supply ABS-A01 – Scale accessory, compact power adapter The KERN Multi-plug power supply is a compact adapter designed to provide reliable power to laboratory and industrial weighing instruments and related accessories in production and workshop environments. Universal connectors for common scale models Compact, lightweight design – 0.18 kg KERN quality, suitable for workshop use Fast dispatch from European warehouse Stable supply for precise measurement results A dependable power source is fundamental for consistent measuring results. This power supply delivers a steady output suitable for weighing instruments, reducing measurement drift caused by unstable voltage. Built according to the expectations of industrial metrology, the unit supports uninterrupted operation of scales and associated accessories, which helps to maintain throughput and avoid repeat measurements. Emphasis on electrical stability translates directly into reproducible weighing performance and fewer process interruptions. Space-saving design that integrates easily The adapter’s compact form factor and low mass (approx. 0.18 kg) allow convenient placement near instruments without consuming valuable bench space. The multi-plug arrangement simplifies connections across different models of weighing equipment, enabling straightforward replacement or retrofitting in existing setups. Mechanical compatibility and compact dimensions reduce installation time and help keep workstations tidy, supporting efficient workflows in both laboratory benches and industrial scales stations. Confidence through proven supply and partner network Sourcing via an experienced distributor ensures predictable logistics and product authenticity. Metav Werkzeuge combines decades of expertise with a wide product range and a verified European quality filter, supporting reliable provisioning for metrology professionals. The presence of a recognised brand like KERN in combination with centralised distribution reduces procurement complexity and provides continuity in supply chains, an important consideration for maintenance planning and production reliability. Contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and arrange supply of the KERN Multi-plug power supply ABS-A01 from Emmerich Technical data Article number: ABS-A01 Manufacturer: KERN SKU: ABS-A01 GTIN: 4045761026483 Facts Weight: 0.18 kg Tariff code: 85044090 eCl@ss: 19051001 Special features Multi-plug power supply for scales and accessories Origin: PH Category path: Waagen › Zubehör FAQ Is this adapter compatible with all KERN scales? Compatibility varies by model; the KERN Multi-plug power supply ABS-A01 is intended for a range of weighing instruments and accessories, but confirmation against the specific scale model is recommended. What is the weight of the power supply? The power adapter has a mass of approximately 0.18 kg, which supports compact mounting and easy integration in constrained workspaces. Can the unit be used in an industrial workshop environment? Yes, the multi-plug power supply from KERN is designed for workshop and laboratory use and is suitable as a stable supply for industrial weighing equipment. Where is the adapter manufactured? The accessory is listed with origin Philippines (PH) and is distributed via Metav Werkzeuge’s European logistics network. How is product authenticity and supply reliability ensured? The combination of the KERN brand and Metav Werkzeuge’s centralised procurement and quality-filtering processes supports traceable sourcing and steady supply. Manufacturer: KERN — Philippines

The combination of single‑cell weighing accuracy, 0.001 g readability and a halogen‑quartz 400 W drying system ensures fast, reproducible moisture results for sensitive samples; Order the KERN DBS 60-3 directly via Metav Werkzeuge or ask our consultants if needed. KERN DBS 60-3 Moisture Analyser — 60 g capacity, 0.001 g readability The KERN DBS 60-3 is a laboratory moisture analyser engineered for rapid, reliable moisture determination in low‑moisture specimens across plastics, pharmaceuticals and food‑related quality control. 60 g capacity, 0.001 g readability Single‑cell weighing system for high stability 400 W halogen‑quartz heater for controlled drying USB data output and 50 sample pans included Consistent accuracy for critical measurements The instrument’s 0.001 g readability and Single‑Cell weighing system deliver high repeatability and low noise, allowing small changes in mass to be detected with confidence. Linearity of ±0.003 g and reproducibility of 0.001 g mean the analyser produces comparable results across repeated runs, which is essential for process control and lab reporting. The compact 95 mm stainless steel pan and robust die‑cast aluminium housing contribute to a stable measurement environment, reducing drift and vibration effects. For applications that demand trace‑level sensitivity—such as polymer moisture profiling or pharmaceutical moisture limits—the analyser provides an objective basis for decisions and quality records. Fast, gentle drying tailored to delicate samples The device uses a halogen‑quartz 400 W heating element with active, programmable heating profiles to balance drying speed with sample integrity. Temperature control is optimised for temperature‑sensitive materials, limiting thermal damage while accelerating moisture removal. Ten programmable drying routines and memory for 100 stored processes simplify routine testing and ensure method repeatability across shifts. The graphic backlit display (15 mm digit height) shows current temperature, the active heating profile and the immediate moisture percentage, making each cycle traceable at a glance. The last measured value is held on screen until the next run overwrites it, supporting documentation without extra steps. Streamlined data handling and laboratory workflow Data transfer is handled via the USB interface, enabling export of weight and process records to a PC or printer for archiving and further analysis. A sample ID function stores up to 99 sample names, and integrated date/time stamping ensures that results are traceable. Password protection prevents unauthorised changes to settings and stored programmes, supporting regulatory compliance. Supplied accessories such as 50 sample pans and a draft shield reduce setup time and cross‑contamination risk. The analyser operates reliably within 5 °C–40 °C and up to 85% relative humidity, making it suitable for typical lab environments. Practical support and suitability for common industries The analyser is particularly suitable for low‑moisture applications in plastic technology, the pharmaceutical sector, food testing and R&D. An internal applications handbook is available in the download centre with examples, recommended settings and best practices to shorten the learning curve. For labs following USP guidance, note that the US Minimum Sample Weight concept should be applied when defining acceptable sample sizes. Built‑in power supply (220–240 V AC, 50 Hz) and a compact weight of 4.6 kg make the instrument simple to integrate on an existing bench. Contact Metav Werkzeuge today to discuss how the KERN DBS 60-3’s single‑cell accuracy and halogen drying technology can improve throughput and traceability in the laboratory; Metav Werkzeuge can advise on calibration options and suitable accessories Technical data Article number: DBS.60-3 Manufacturer: KERN GTIN: 4045761124226 Country of origin: PH Facts Weighing range: 60 g Readability: 0.001 g Linearity: ±0.003 g Reproducibility: 0.001 g Weighing pan diameter: 95 mm Display digit height: 15 mm Power supply: 220 V–240 V AC, 50 Hz Heater power: 400 W (halogen‑quartz) Operating temperature: 5 °C–40 °C Max ambient humidity: 85% Weight: 4.6 kg Special features Single‑cell weighing system Backlit graphic display 10 programmable drying programmes Memory for 100 drying processes Last value hold until overwritten Password protection for settings Sample ID for up to 99 samples Date and time display USB interface for data transfer 50 sample pans included Draft shield supplied Housing: die‑cast aluminium Weighing pan: stainless steel Built‑in power supply Applications handbook available in download centre FAQ What is the smallest change in mass the analyser can detect? The KERN DBS 60-3 detects changes down to 0.001 g; this level of sensitivity supports reliable moisture determination for low‑moisture samples. Which materials can be analysed with this moisture analyser? The device is suitable for materials such as plastics, pharmaceutical samples, many food matrices and other low‑moisture specimens; the instrument’s controlled heating is designed to protect temperature‑sensitive samples. How are drying methods and programmes managed? Up to 10 drying programmes can be stored and the unit retains records for 100 processes, allowing standardised methods to be applied and repeated without reconfiguration. Can measurement data be exported for documentation? Yes; the DBS 60-3 includes a USB interface for transferring weight and process data to a PC or printer for archiving and further evaluation. Is the instrument protected against unauthorised changes? Password protection is available to secure stored settings, programmes and measurement parameters on the analyser. Metav Werkzeuge — Emmerich am Rhein, Germany · Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271

Technical Data and Detail Information for KERN Moisture analyser :Manufacturer: KERNSeries: DABModel: Moisture analyserMaterial: Wägeplatten aus AluminiumReadout: 0,001 g - 0,01 gOrder your new Moisture analyser now Online!

Reliable data transfer and factory-fitted compatibility keep weighing workflows uninterrupted; the compact, lightweight construction supports tidy installation and easy integration on the shop floor. Order the interface cable directly via Metav Werkzeuge or consult our advisers for technical clarification. KXS-A04 Interface cable (Factory Option) by KERN — reliable data link, compact design The KXS-A04 is a factory option interface cable intended to provide a direct data connection between KERN weighing instruments and external devices, optimising measurement workflows in industrial and workshop environments. Factory option for KERN scales Reliable serial data transmission Compact and lightweight, 0.1 kg Quick integration for weighing systems Keep measurement data flowing with minimal effort The interface cable delivers a straightforward means of transferring recorded values from weighing instruments into production systems or data collectors, reducing manual transcription and the risk of entry errors. As a factory option, the cable is built to match the electrical and mechanical requirements of KERN devices, which simplifies commissioning and avoids time-consuming adaptations. This stabilises data capture across repetitive weighing tasks and supports process reliability in quality-controlled environments. Installation that reduces downtime and clutter Designed for simple routing and a modest footprint, the accessory is compact and weighs only 0.1 kg, allowing neat panel and bench installations without adding bulk. The design prioritises ease of connection so that integration into existing setups can be completed with minimal disruption to production. Clear labelling and a robust connector interface mean less time spent diagnosing connection faults and more time on productive measuring and inspection work. Built for dependable use in metrology workflows As an accessory for weighing systems from KERN, the cable is intended to match professional workshop demands and to be stored or deployed easily as required. Identified by SKU KXS-A04 and GTIN 4045761151901, the component supports a consistent equipment configuration strategy for serialised instruments and spares management. Origin information is recorded as CN, and the design reflects an emphasis on functional reliability and compatibility rather than decorative elements. For dependable integration of KERN weighing instruments, request the KXS-A04 factory option from Metav Werkzeuge — our advisers can confirm fitment and provide procurement guidance via info@metav-werkzeuge.com or by telephone Technical Data Article number: KXS-ACC Manufacturer: KERN SKU: KXS-A04 GTIN: 4045761151901 Country of origin: CN Tariff number: 84239010 ECLASS: 19050112 Weight: 0.1 kg Core Data Weight (kg): 0.1 GTIN: 4045761151901 Tariff code: 84239010 ECLASS: 19050112 Special features Factory option for KERN scales Category: Scales / Accessories Compact, lightweight design SKU: KXS-A04 FAQ Is the cable compatible with KERN weighing instruments? The KXS-A04 is supplied as a factory option for KERN weighing instruments and is intended to match the device interfaces specified by the manufacturer. What is the weight and size consideration for mounting? The cable weighs 0.1 kg and is designed for compact routing and minimal panel space, allowing tidy installations in workshop and production environments. Does the package include any software or drivers? The KXS-A04 provides the physical interface; software or driver requirements depend on the connected system and should be confirmed with the weighing instrument manual or our technical advisers. How is the component identified for stock and procurement? The accessory is listed under SKU KXS-A04 and GTIN 4045761151901, and the article number for ordering is KXS-ACC. KERN – Origin: CN · Distributor contact: info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of a reliable RS-232 connection and a flexible 1.5 m lead to simplify data transfer from analytical balances; the compact, lightweight design supports tidy installation and straightforward integration. Order the ACS-A01 interface cable directly via Metav Werkzeuge or ask our consultants if needed. ACS-A01 Interface Cable — RS-232 connection for KERN analytical balances, approx. 1.5 m The ACS-A01 is an RS-232 interface cable designed to connect KERN analytical balances to external devices for stable serial data transfer in laboratory and workshop environments RS-232 serial interface for reliable data transfer Approx. 1.5 m cable for flexible positioning Compatible with KERN ACS/ACJ and ABS-N/ABJ‑NM Plug-and-play connection, ready for immediate use Ensure dependable serial communication for measurement workflows The RS-232 standard remains a proven solution for instrument-to-PC and instrument-to-printer connections where consistent timing and simple protocol handling are required. This interface lead offers serial communication that reduces manual transcription and supports automated logging, which in turn improves data integrity for audits and quality records. With a pragmatic focus on compatibility and straightforward wiring, the cable contributes to more efficient measurement routines and fewer interruptions in production or laboratory work. Integrate existing balances quickly and with minimal setup Designed for use with KERN ACS/ACJ and ABS-N/ABJ-NM series, the interface lead shortens commissioning times by avoiding complex adapters or configuration. The 1.5 m length allows flexible positioning between bench instruments and data receivers while avoiding excessive cable slack. The plug-and-play characteristic supports rapid deployment in environments that demand reliable throughput—this means less downtime and faster transfer of weighing results into processing or reporting systems. Compact and practical design for everyday use Weighing only about 0.1 kg, the cable is compact enough for neat cable management and convenient storage when not in use. The design minimises clutter on instrument benches and simplifies routing in confined laboratory layouts. While remaining unobtrusive, the lead provides a direct physical link that supports continuous measurement operations and contributes to a professional, organised workspace. Reduce errors and strengthen traceability Reliable electronic transfer of balance readings helps to close the gap between measurement and documentation. By eliminating handwritten entries and enabling direct data capture, the interface lead supports better traceability and faster error detection. For regulated environments or quality-controlled production, the consistent transfer enabled by this RS-232 cable forms a small but vital part of maintaining process reliability and documented compliance. For professional integration or procurement of the KERN ACS-A01 interface cable, contact Metav Werkzeuge for ordering and technical advice — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: ACS SKU: ACS-A01 Manufacturer: KERN Interface: RS-232 Cable length: approx. 1.5 m Weight: 0.1 kg Suitable for analytical balances: KERN ACS/ACJ, KERN ABS-N/ABJ-NM GTIN: 4045761124219 Facts ECLASS: 19050112 Tariff number: 90160090 Origin: PH Special features Plug-and-play connection Compact, lightweight lead Designed for laboratory and workshop use FAQ What devices is this cable compatible with? The cable is compatible with KERN ACS/ACJ and ABS-N/ABJ-NM analytical balances and provides a standard RS-232 connection for these models. Can the ACS-A01 be used to connect a balance to a PC? Yes, the ACS-A01 interface cable supports serial connection to PCs and printers that accept RS-232 input for direct data transfer. How long is the cable and is it easy to route? The lead is approximately 1.5 m long and lightweight (around 0.1 kg), which makes it suitable for typical bench routing and neat cable management. Does the cable require additional drivers or software? The ACS-A01 provides a plug-and-play RS-232 connection; specific software requirements depend on the receiving device and data-logging setup. KERN — origin: PH; GTIN: 4045761124219; SKU: ACS-A01

Combine reliable RS-232 connectivity, a practical 1.5 m cable length and direct compatibility with multiple KERN balance models for uninterrupted data capture; order via Metav Werkzeuge or consult our experts for seamless integration. Interface cable 770-926 – RS-232 connection cable, 1.5 m (KERN) The Interface cable 770-926 is an RS-232 lead for connecting KERN scales and balances to external devices, enabling straightforward serial data transfer in laboratory and workshop environments RS-232 interface for reliable data transfer Cable length approx. 1.5 m for flexible routing Compatible with KERN ABJ, ABS, ABT, PBS, PBJ Dependable serial communication for measurement data The RS-232 standard is a widely used method for serial communication between weighing instruments and peripheral systems; this interface cable supports stable signal transmission for recorded values and control commands. By providing a standardised physical connection to external devices such as data loggers, printers or PCs, the cable minimises interruptions in automated workflows and supports traceable data handling, which is essential in quality assurance and process documentation. Practical length and lightweight design for workshop use A cable length of approx. 1.5 m offers a useful balance between reach and neat routing on workbenches or in small measurement stations. The lead’s low weight and compact construction reduce strain on connectors and help maintain tidy installations in busy production or inspection areas. This practical configuration contributes to efficient bench layouts and reduces the time spent on setup, improving overall operational throughput. Fast integration with KERN balances and clear compatibility Designed specifically for KERN models ABJ, ABS, ABT, PBS and PBJ, the 770-926 interface cable simplifies system integration by matching connector and signalling requirements of the listed balances. The clear compatibility reduces commissioning effort and supports reliable data export from scales into existing quality-control or inventory systems, helping to maintain continuous measurement records without complex conversions. Contact Metav Werkzeuge in Emmerich for availability, technical details or purchasing advice on the KERN 770-926 interface cable: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: 770-926 Manufacturer: KERN GTIN: 4045761014824 Country of origin: DE Core data Cable length: approx. 1.5 m Weight: 0.08 kg Tariff number: 84239010 Compatibility & features Interface: RS-232 Compatible models: KERN ABJ, ABS, ABT, PBS, PBJ Category: Accessories for scales FAQ Is this cable suitable for connecting a KERN balance to a PC serial port? The interface cable 770-926 uses the RS-232 standard and is intended for serial connections between KERN balances and external devices such as PCs or printers that accept RS-232 signals. Which KERN models are explicitly supported by this cable? Compatibility is specified for KERN models ABJ, ABS, ABT, PBS and PBJ; these models match the connector and signalling used by the 770-926 cable. What is the cable length and how does it affect installation? The cable length is approximately 1.5 m, providing sufficient reach for bench-top setups while keeping cable routing compact and manageable in laboratory or workshop layouts. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Reliable RS‑232 data transfer and a practical 1.5 m length support seamless connection between weighing instruments and host devices; robust compatibility with balance interfaces reduces integration effort. Order the interface cable directly via Metav Werkzeuge or contact our consultants for application advice. KERN Interface cable 474-926 — RS-232 serial interface, 1.5 m The KERN Interface cable 474-926 is an RS‑232 data cable for connecting scales and balances to computers, printers or data loggers in industrial and laboratory workflows RS-232 serial connection for reliable data transfer Cable length 1.5 m for flexible positioning Designed for scales and balance interfaces Faster, more reliable data transfer for weighing workflows The cable provides a stable RS-232 link that simplifies automated data capture from weighing devices, reducing manual entry and errors. By enabling direct serial communication between instruments and control systems, the cable supports tighter process control and faster reporting. The combination of serial protocol support and a practical cable length means fewer interruptions to production and a more consistent flow of measurement data. Easy integration with existing equipment and systems A standard serial interface removes the need for converters in most installations, making integration into legacy and modern systems straightforward. The 1.5 m lead length allows flexible device placement on benches or in cabinets while maintaining tidy cable runs. Installation requires minimal configuration when the connected balance or scale already supports RS‑232 output, which keeps commissioning time to a minimum and reduces downtime. Industrial suitability and straightforward handling Lightweight at approximately 0.08 kg, the cable is intended for routine workshop and laboratory environments where frequent, dependable connections are required. Manufactured for precision weighing applications, it supports compact setups and mobile test stations alike. The product matches the expectations of professional users who rely on consistent data exchange between measuring instruments and peripheral devices. Clear use cases and practical benefits Ideal for data logging, label printing and PC-based measurement recording, this interface cable is a practical choice where long-term, uninterrupted serial communication is needed. The cable reduces manual transcription, helps maintain traceable measurement records and supports quality workflows in production, testing and goods-in areas. For situations requiring simple, proven connectivity to weighing equipment, this cable delivers a focused solution. Contact Metav Werkzeuge in Emmerich am Rhein for integration guidance on the KERN interface cable 474-926 or to discuss compatible setups; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 474 SKU: 474-926 GTIN: 4045761245181 Manufacturer: KERN Country of origin: CN Eclass: 19050112 HS code: 84239010 Weight: 0.08 kg Core specifications Interface: RS-232 serial Cable length: 1.5 m Segment: Accessories for scales Product group: Cable Features & applications For scales and balances Suitable for data logging and printing interfaces Intended for workshop and laboratory use Manufacturer: KERN FAQ What devices is this cable compatible with? The KERN interface cable 474-926 is compatible with weighing instruments that provide an RS‑232 serial output; compatibility depends on the instrument's serial port and protocol settings. How long is the cable and is that sufficient for bench setups? The cable length is 1.5 m, which is suitable for most bench and cabinet installations while allowing tidy cable routing. Does the cable support direct data logging to a PC? Yes; the RS‑232 connection enables direct transfer of measurement data to PCs, data loggers or label printers that accept serial input. Is the connector type industry standard? The cable provides a standard RS‑232 serial connection; users should verify the required connector and pinout in the instrument manual before installation. Is this cable suitable for regular workshop use? Designed for weighing applications, the cable is lightweight and intended for routine workshop and laboratory environments where reliable serial communication is required. KERN; Metav Werkzeuge, Emmerich am Rhein; info@metav-werkzeuge.com / +49 2822 7131930