Highly accurate analytical balances for submilligram weighing
Analytical balances provide precise weighing of tiny samples down to the submilligram range and are indispensable for chemical analyses, pharmaceutical work and quality assurance where reliable mass determination is critical. These balances support laboratory workflows with features such as internal calibration, excellent measurement stability and modern data interfaces, delivering high precision, traceable results and efficient data handling.
101 g Precision Analytical Balance 0.00001 g Readability, Single-Cell Weighing System, Glass Draft Shield - KERN
Take advantage of the combination of Single‑Cell accuracy, automatic internal calibration and GLP‑ready documentation for reliable results and efficient lab workflows; order the instrument directly via Metav Werkzeuge or ask our consultants if needed. KERN ABT 100-5NM analytical balance — 101 g range, 0.00001 g readability The ABT 100-5NM is an analytical balance designed for laboratory dosing, formulation and quality control, combining a Single‑Cell weighing system with automated calibration for consistent accuracy across locations. Single‑Cell weighing system for high linearity Readability 0.00001 g for ultra‑fine results Internal auto‑calibration with GLP print Large glass windscreen with 3 sliding doors Stainless steel pan 80 mm for easy cleaning Consistent high‑precision measurement for critical tasks The instrument delivers exceptional repeatability and stable measurement performance, with a readability of 0.00001 g, reproducibility 0.00005 g and linearity ±0.00015 g, enabling precise quantification of minute masses within a 101 g range. The Single‑Cell system reduces multiple transducer errors and simplifies load distribution, which means fewer recalibrations and predictable results during routine analysis. These technical attributes translate into trustworthy data for R&D, QC and pharmaceutical routines. Automated calibration and audit‑ready documentation Laboratories benefit from the balance’s internal auto‑calibration, which triggers on temperature shifts ≥ 0.5 °C and at scheduled intervals, maintaining measurement stability without manual intervention. Built‑in reporting includes a GLP‑compliant calibration protocol and a programmable four‑digit weighing ID that prints with calibration records, supporting traceability and audit requirements. The unit also enables immediate transfer of measurement records: automatic data output to PC or printer occurs after each settling, helping to streamline documentation and reduce recording errors. Designed for safe, ergonomic handling and efficient dosing Handling is simplified by a large glass windscreen with three sliding doors, which offers unobstructed access while shielding the weighing chamber from drafts. The balance includes a dosing aid and selectable high‑stability modes and filters that assist in obtaining stable readings during dispensing operations. A combined tare/print function and automatic recipe numbering support clear formulation workflows, while the LCD display (14 mm digits) ensures values are easy to read at a glance. The stainless steel weighing pan (80 mm) is durable and straightforward to clean, reducing downtime between tasks. Built for laboratory integration and everyday reliability The instrument supports broad mains voltages (110–230 V AC) and is supplied with adapters for CH, EURO, UK and US sockets, making it simple to deploy in different locations. Environmental operating parameters (10–30 °C, max. 80% relative humidity) and a compact footprint (217 × 356 × 338 mm) mean the balance fits typical bench environments without special installation. Robust construction and practical connectivity features ensure the device remains a dependable component of measurement infrastructure, with automatic data output to simplify data handling and minimise transcription steps. Select the proven precision of KERN and contact Metav Werkzeuge in Emmerich for expert consultation and reliable supply of the ABT 100-5NM analytical balance. Technical Data Article number: ABT-NM SKU: ABT.100-5NM GTIN: 4045761185517 Manufacturer: KERN Key figures Weighing range: 101 g Readability: 0.00001 g Reproducibility: 0.00005 g Linearity: ±0.00015 g Minimum sample weight: 0.001 g Pan diameter: 80 mm Display digit height: 14 mm Net weight: 7.53 kg Dimensions (W × D × H): 217 × 356 × 338 mm Operating temperature: 10–30 °C Max. relative humidity: 80% Power supply: 110 V - 230 V AC Design & special features Weighing system: Single Cell Pan material: Stainless steel Glass windscreen with 3 sliding doors Internal auto‑calibration (temperature‑ and time‑controlled) GLP‑compliant calibration protocol print Dosing aid; high‑stability mode and selectable filters Combined tare and print function; automatic recipe numbering Automatic data output to PC/printer after each settling Included: protective cover Supplied adapters: CH, EURO, UK, US Country of origin: PH ECLASS: 32120101 FAQ What measurement range and sensitivity does the balance offer? The KERN ABT 100-5NM analytical balance covers a maximum range of 101 g and a sensitivity (readability) of 0.00001 g, making it suitable for ultra‑fine weighing tasks. How does the calibration routine support laboratory compliance? The ABT 100-5NM from KERN features internal automatic calibration triggered by temperature changes and timed intervals; calibration records and a GLP‑compliant protocol can be printed for traceability. Can the balance output data directly to a PC or printer? Yes, the KERN ABT 100-5NM provides automatic data output to a PC or printer after each stable reading, facilitating digital documentation and integration into lab workflows. Is the windscreen suitable for easy sample handling during dispensing? The balance includes a large glass windscreen with three sliding doors, which allows comfortable access for dosing while maintaining protection from drafts for stable measurements. What connections and power options are provided for international use? The KERN ABT 100-5NM accepts 110–230 V AC and is supplied with adapters for CH, EURO, UK and US sockets to accommodate diverse mains configurations. Which features assist with recipe formulation and documentation? Recipe components are automatically numbered and printed with weight values by the ABT 100-5NM, and the combined tare/print function speeds up formulation documentation. KERN — Country of origin: PH — GTIN: 4045761185517
102 g Precision Analytical Balance Single-Cell, Internal Calibration, 0.00001 g Readability, 91 mm Pan, OLED Display - KERN
Take advantage of Single Cell speed, internal automatic calibration and integrated data integrity features for efficient, compliant weighing. Order the KERN ABP 200-5DM directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN ABP 200-5DM — Analytical balance with Single Cell technology and high-resolution readability The KERN ABP 200-5DM is a laboratory analytical balance designed for fast, stable weighing in pharmaceutical, R&D and quality-control environments. Single-Cell technology for rapid, stable weighing Internal automatic calibration at temperature shifts Large glass draft shield with three sliding doors Multifunction stainless-steel weighing pan included Faster results through high-precision measurement The new generation Single Cell weighing system delivers rapid stabilisation and consistent results, reducing cycle times and increasing throughput. With selectable readabilities of 0.00001 g and 0.0001 g and weighing ranges up to 102 g / 220 g, the instrument combines fine resolution with practical capacity. Repeatability and linearity figures (e.g. 0.00005 g reproducibility and ±0.0001 g linearity) translate into reliable numeric values for documentation and statistical process control. For users new to such specifications: smaller readability means the balance detects tinier mass changes, while reproducibility indicates how closely repeated measurements match — both essential for traceable laboratory work. Built for regulated workflows and traceable documentation This analytical balance supports regulated environments by automating routine routines: internal automatic calibration triggers with temperature changes and at timed intervals to keep accuracy independent of location. The instrument offers configurable user profiles, recipe printing with automatic ingredient numbering and data export via RS-232 and USB (host/device). Support for U.S. FDA 21 Part 11-style data integrity features and automatic data output after each stillness assist with audit trails and secure record-keeping. These capabilities make the device particularly well suited for pharmaceutical applications and quality management systems that demand reliable documentation and operator control. Practical design for everyday laboratory use A large glass draft shield with three sliding doors and a multifunction stainless-steel weighing pan reduce airflow interference and shorten settling time, simplifying handling of small samples, tubes and microvessels. The clear OLED display with 12 mm digit height improves readability at the bench, while dosing aids and selectable filter modes support accurate portioning and formulation tasks. Robust construction, a stainless-steel weighing pan and a compact footprint (220 × 370 × 350 mm) make the balance a dependable workshop companion; the unit runs from a universal 100–240 V AC adapter and operates within a 10 °C–30 °C temperature window and up to 80% relative humidity. User-focused functions such as guest mode, barcode access to profiles and permission-controlled adjustments support secure multi-user laboratories. Contact Metav Werkzeuge in Emmerich to discuss specification options for the KERN ABP 200-5DM or to request a customised procurement recommendation based on the Single Cell accuracy and calibration features Technical data Article number: TABP-A SKU: ABP.200-5DM Manufacturer: KERN GTIN: 4045761213944 Origin: PH Core specifications Weighing ranges: 102 g; 220 g Readability: 0.00001 g; 0.0001 g Minimum sample weight: 0.001 g Reproducibility: 0.00005 g; 0.0001 g Linearity: ± 0.0001 g; 0.0002 g Weighing pan diameter: 91 mm Display digit height: 12 mm Net weight: 7.72 kg Operating temperature: 10 °C–30 °C Maximum ambient humidity: 80% Power supply: 100 V–240 V AC 50/60 Hz 0.3 A Power adapters included: CH; EURO; UK; US Special features Single Cell weighing system OLED display Stainless-steel weighing pan Internal automatic calibration (temperature-triggered and timed) Large glass draft shield with three sliding doors Multifunction weighing plate included Dosing aid and selectable filter settings Recipe printing with automatic component numbering Up to 10 user profiles, barcode access and guest mode Interfaces: RS-232 and USB (Host and Device) Automatic data output after each stillness Menus available in German and English Support for U.S. FDA 21 Part 11-style data integrity features Verification class I FAQ What is the smallest mass this balance can reliably measure? The minimum sample weight is 0.001 g; depending on selected readability (0.00001 g or 0.0001 g), the KERN ABP 200-5DM will issue a warning if measurements fall below the configured minimum. Can the balance be integrated into a data-logging system? Yes; the instrument provides RS-232 and USB interfaces for data transfer and supports automatic output to a connected PC or printer after each stable reading. How does the internal automatic calibration work? Calibration is triggered automatically when ambient temperature changes by ≥ 1 °C and at timed intervals (every 4 hours), ensuring consistent accuracy without manual intervention. Is the balance suitable for pharmaceutical routine analysis? The balance is specified for pharmaceutical applications and research; feature sets such as recipe printing, user permissions and U.S. FDA 21 Part 11 support align it with regulated workflows. What measures reduce the influence of air currents on small samples? A large glass draft shield with three sliding doors and a multifunction weighing plate minimise airflow effects and shorten settling times for micro-samples and small vessels. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp +49 170 2837271
120 g Analytical Balance Single-Cell 0.0001 g Readability 91 mm Pan, LCD Display, IP Not Specified - KERN
Take advantage of the combination of a Single Cell weighing system, exceptional readability of 0.0001 g and compact, robust construction for reliable analytical results and smooth laboratory workflows. Order the analytical balance directly via Metav Werkzeuge or ask our consultants if needed. KERN ABJ.120-4NM Analytical balance — 120 g range, 0.0001 g readability The ABJ.120-4NM is an analytical laboratory balance with a Single Cell weighing system, engineered for high-precision mass determination in research, quality control and routine lab work Single-cell weighing system Readability 0.0001 g Weighing range up to 120 g Stainless steel weighing pan Ø91 mm Compact housing 210×340×350 mm Accurate metrology for dependable results The instrument delivers readability of 0.0001 g, reproducibility 0.0002 g and linearity ±0.0003 g, providing a measurable benefit where consistent, traceable data are essential. The Single Cell weighing system centralises the load path, reducing sensitivity to small positional errors on the pan and improving stability during micro‑weighing. For laboratories that require repeatable results, these specifications translate into fewer remeasures, clearer data logs and more efficient quality procedures. Built to fit laboratory workflows and save time A stainless steel weighing pan with a 91 mm diameter and a clear LCD display with 14 mm digit height ensure quick reading and easy cleaning. The balance accepts mains voltages from 110 V to 230 V AC and is supplied with international adapters (AUS; CH; EURO; UK; US), reducing setup time across sites. The compact footprint (210 × 340 × 350 mm) and moderate mass (6.27 kg) make the unit simple to position within fume hoods or on benchtops without compromising stability. Calibration class I confirms suitability where regulated procedures demand a recognised accuracy standard. Durable materials and straightforward operation for everyday use The housing combines durable plastic with a stainless steel pan, balancing corrosion resistance and ease of maintenance. Operating conditions are specified for 10 °C–30 °C and up to 85% relative humidity, which supports consistent performance in many lab environments. The manufacturer KERN is known for precision instruments; the construction and measured specifications reduce downtime and support routine workflows in education, industry and QA labs. The model is particularly appropriate where small sample masses and counting tasks are frequent, as the balance also supports piece-counting down to 1 mg in laboratory mode. For high-precision analytical weighing choose the KERN ABJ.120-4NM and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: ABJ_N SKU: ABJ.120-4NM Manufacturer: KERN GTIN: 4045761145320 Origin: PH Tariff code: 90160010 Facts Readability: 0.0001 g Weighing range (max): 120 g Reproducibility: 0.0002 g Linearity: ±0.0003 g Weighing pan diameter: 91 mm Display digit height: 14 mm Operating temperature: 10 °C–30 °C Max relative humidity: 85% Weight: 6.27 kg Power input: 110 V–230 V AC Special features Single Cell weighing system Calibration class I Housing: plastic; weighing plate: stainless steel Display type: LCD International adapter set included (AUS; CH; EURO; UK; US) Category: Laboratory balance FAQ What level of precision does the balance offer? The ABJ.120-4NM provides a readability of 0.0001 g, with reproducibility of 0.0002 g and linearity of ±0.0003 g, suitable for high‑precision analytical tasks. Is the weighing pan suitable for routine cleaning and small samples? Yes, the stainless steel pan (Ø91 mm) resists corrosion and is easy to clean, making the balance well suited to frequent sample changes and routine laboratory maintenance. Can the balance be used in different countries without special adapters? The unit is supplied with adapters for AUS, CH, EURO, UK and US mains standards, allowing straightforward use across international sites. Which environmental conditions are required for accurate operation? Accurate performance is maintained between 10 °C and 30 °C and up to 85% relative humidity; adhering to these ranges helps preserve the balance’s precision. Is this model suitable for piece-counting applications? Yes, in laboratory counting mode the device can register smallest piece weights down to 1 mg, supporting practical counting tasks in QC and inventory checks. KERN — Origin: Philippines; Seller: Metav Werkzeuge, Emmerich, Germany — info@metav-werkzeuge.com · +49 2822 7131930
120 g Analytical Balance Single-Cell, 0.0001 g Readability, 91 mm Stainless Steel Pan, LCD 14 mm Display - KERN
Combine laboratory-grade accuracy with a Single-Cell weighing system and a compact footprint to ensure consistent, traceable results in daily quality control. Order the ABS.120-4N directly via Metav Werkzeuge or ask our consultants if needed. ABS.120-4N — Analytical balance with Single‑Cell weighing, 120 g range (KERN) The ABS.120-4N is an analytical balance designed for high-precision laboratory and quality-control applications, featuring a Single‑Cell weighing system for stable measurements and a stainless-steel pan for reliable sample handling. Single-Cell weighing system Readability 0.0001 g 120 g maximum capacity Stainless-steel pan Ø 91 mm Confident results through proven measurement stability The combination of a Single‑Cell weighing system with high metrological performance provides measurable benefits for routine analyses and method validation. With a readability of 0.0001 g, reproducibility of 0.0002 g and linearity of ±0.0003 g, the instrument reduces uncertainty and supports reproducible datasets. The Single‑Cell concept minimises interference from external vibrations and air currents, so results remain consistent even in busy laboratory environments. This makes the balance suitable for traceable documentation and tasks where small deviations can have considerable consequences. Practical design that improves daily workflow Compact dimensions and laboratory-oriented ergonomics help to integrate the instrument into existing workstations without complicating workflows. The stainless‑steel weighing pan (Ø 91 mm) and a plastic housing combine corrosion resistance with easy cleaning, while the LCD display with 14 mm digit height ensures clear read‑out of values during repetitive operations. The unit is supplied with universal plug adapters (CH, EURO, UK, US), enabling straightforward commissioning across different locations. Together these features shorten setup times and reduce the potential for handling errors, helping teams to maintain throughput without sacrificing measurement quality. Fit for counting, QC and routine analysis Equipped for practical laboratory tasks, the balance supports piece counting down to 1 mg in laboratory mode and 10 mg in normal counting mode, offering flexibility for inventory checks, sample preparation and incoming‑goods testing. The instrument’s 120 g maximum capacity and stable weighing behaviour simplify switching between small and larger samples, while the clear measurement performance data supports audit trails and quality documentation. For businesses that prioritise reliable outcomes, the combination of precision and operational convenience contributes to fewer repeat tests and greater confidence in daily decisions. Choose KERN precision for consistent lab results — contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply of the ABS.120-4N analytical balance. Technical data Article number: ABS.120-4N (SKU) Alternative article number: ABS_N GTIN: 4045761145368 Manufacturer: KERN Country of origin: PH Tariff code: 90160010 Core specifications Weighing range (max): 120 g Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ±0.0003 g Weighing pan diameter: 91 mm Display digit height: 14 mm Dimensions (W×D×H): 210 × 345 × 328 mm Weight: 5.83 kg Operating temperature: 10°C–30°C Max. relative humidity: 85% Power input: 110 V–230 V AC Features and materials Weighing system: Single‑Cell Housing material: Plastic Weighing pan material: Stainless steel Display type: LCD Counting capability: min. piece weight 1 mg (laboratory), 10 mg (normal) Power supply: Plug‑in adapter (CH, EURO, UK, US) FAQ What level of precision can be expected from this analytical balance? The ABS.120-4N delivers laboratory‑grade precision with a readability of 0.0001 g, reproducibility of 0.0002 g and linearity of ±0.0003 g, making it suitable for tasks that require tight tolerance control. Is the instrument suitable for piece counting and small parts inventory? Yes. The balance supports piece counting with a minimum piece weight of 1 mg in laboratory mode and 10 mg in normal mode, which is suitable for small‑part inventories and quality checks. How does the Single‑Cell system benefit everyday measurements? The Single‑Cell weighing system used in the ABS.120-4N reduces sensitivity to external disturbances and ensures more stable readings, improving repeatability and decreasing the likelihood of outlying results. Can the balance be used across different laboratory environments? The ABS.120-4N is supplied with multiple plug adapters (CH, EURO, UK, US) and operates reliably within a temperature range of 10°C–30°C and up to 85% relative humidity, facilitating use in varied laboratory settings. Who is the manufacturer of this analytical balance? The unit is manufactured by KERN; the ABS.120-4N is designed for precision laboratory applications and meets product specifications for consistent weighing performance. Metav Werkzeuge, Emmerich am Rhein — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
120 g Analytical Balance Single-Cell, 0.0001 g Readability, Internal Calibration, 80 mm Stainless Steel Pan - KERN
Take advantage of the combination of high accuracy, fast stabilisation and automatic internal calibration for reliable results and uninterrupted workflows; order directly via Metav Werkzeuge or request advice from our consultants. KERN ABT.120-4NM Analytical Balance — Single‑Cell System, 120 g / 0.0001 g The ABT.120-4NM analytical balance from KERN is a compact laboratory instrument designed for high‑precision weighing tasks in research, quality control and production laboratories. Single‑cell weighing system Readability 0.0001 g Internal automatic calibration Stainless‑steel 80 mm weighing pan Consistent accuracy for regulated environments The balance delivers high precision with a readability of 0.0001 g and a linearity of ± 0.0002 g, providing traceable performance for routine analyses and documentation. The single‑cell weighing system reduces sensitivity to external influences and supports reproducible results, while the Class I verification and verification value of 0.001 g meet strict regulatory requirements. Laboratory managers benefit from predictable measurement behaviour and clearer decision bases when assessing sample masses or performing analytical routines. Efficient workflows and stable operation A low settling time and reproducibility of 0.0001 g ensure rapid, repeatable measurements that increase throughput without sacrificing quality. The LCD display with 14 mm digit height provides quick readability of values, reducing operator error in busy settings. Compact dimensions (217 × 356 × 338 mm) and a total weight of 7 kg create a small footprint on the bench while the stainless‑steel weighing pan (Ø 80 mm) resists corrosion and eases cleaning, supporting uninterrupted operation in everyday lab work. Fewer interruptions thanks to built‑in calibration and robust design Automatic internal calibration simplifies routine use and reduces dependence on external weights, lowering maintenance time and potential downtime. The balance accepts a wide operating temperature range of 10 °C – 30 °C and tolerates ambient humidity up to 80 %, enabling stable performance across typical laboratory environments. The supplied international adapter set (CH; EURO; UK; US) and a universal plug‑in power supply mean the unit is ready to integrate into diverse work environments with minimal setup. Contact Metav Werkzeuge for tailored advice on integrating the KERN ABT.120-4NM into the workflow — our consultants in Emmerich provide technical clarification and direct order support via 📧 info@metav-werkzeuge.com, ☎️ +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Article number: ABT-NM SKU: ABT.120-4NM Manufacturer: KERN GTIN: 4045761185524 Customs tariff number: 90160010 Country of origin: PH Core specifications Weighing capacity: 120 g Readability: 0.0001 g Minimum weight: 0.01 g Linearity: ± 0.0002 g Reproducibility: 0.0001 g Pan diameter: 80 mm Weight: 7 kg Operating temperature: 10 °C – 30 °C Max humidity: 80 % Power supply: 220 V – 240 V AC, 50 Hz Special features Weighing system: single‑cell Internal automatic calibration Weighing pan material: stainless steel Display type: LCD, digit height 14 mm Calibration class: I Verification values: 0.001 g Adapter plugs included: CH; EURO; UK; US FAQ What is the maximum weighing capacity of this balance? The balance has a maximum capacity of 120 g as specified for the KERN ABT.120-4NM analytical balance. How fine are the measurements and how repeatable are they? Readability is 0.0001 g and reproducibility is 0.0001 g, ensuring highly repeatable results for routine analytical tasks with the ABT.120-4NM. Does the instrument perform internal calibration? Yes, the ABT.120-4NM features internal automatic calibration, reducing the need for external reference weights during regular operation. Is the weighing pan suitable for corrosive samples and easy to clean? The weighing pan is made of stainless steel with an 80 mm diameter, providing corrosion resistance and straightforward cleaning. Which power connectors are supplied with the unit? The package includes adapter plugs for CH, EURO, UK and US, and the balance operates on 220 V – 240 V AC, 50 Hz. KERN — Philippines — contact details not provided
120 g Precision Analytical Balance Single-Cell Weighing System 0.00001 g/0.0001 g Readability, Internal Calibration - KERN
The combination of a Single-Cell weighing system and internal automatic calibration ensures stable, reproducible results with minimal downtime; precise dosing functions and GLP-capable reporting support reliable documentation for regulated laboratories. Order the balance from Metav Werkzeuge or ask the consultants for tailored advice. KERN ABT 120-5DNM — analytical balance with Single-Cell system and ultra-fine readability The KERN ABT 120-5DNM analytical balance provides laboratory-grade weighing accuracy with a Single-Cell weighing system, designed for pharmaceutical, research and quality-control environments. Single-Cell weighing system for stable results Internal automatic calibration for constant accuracy High-stability mode and selectable filters for dosing GLP-compliant protocol printout and combined tare/print Consistent laboratory accuracy for demanding tasks The Single-Cell weighing concept delivers high precision by isolating the weighing sensor from external stresses; this results in improved reproducibility and reduced sensitivity to installation variations. With dual readability settings down to 0.00001 g and 0.0001 g, the instrument supports exact quantification of small samples and trace components. The device’s linearity and minimum sample weight specifications ensure meaningful results for micro-weighing tasks, while a stainless steel weighing pan provides a corrosion-resistant surface that is easy to clean. Streamlined documentation and traceability for regulated workflows Automated features reduce manual steps and accelerate routine work: an internal automatic calibration routine activates with temperature changes or cyclic timing to maintain accuracy; GLP-compliant calibration reports can be printed at the touch of a button and the combined tare/print function numbers and records batch components automatically. Data export after each stabilisation simplifies archive creation and auditing. These functions reduce administrative overhead and support reproducible, audit-ready processes in the laboratory. Robust design and practical ergonomics for everyday use A large glass draft shield with three sliding doors offers unobstructed access while protecting the balance from air currents that would disturb readings. The balance includes a protective work cover and a compact footprint, making it suitable for bench-top use in constrained workspaces. Built-in filter options and a high-stability mode aid dosing operations on less-than-ideal surfaces. Designed for laboratory and pharmaceutical applications, the instrument pairs reliable hardware with intuitive controls to enhance throughput without compromising measurement integrity. For precise laboratory weighing backed by Metav Werkzeuge’s quality filter in Emmerich, contact Metav Werkzeuge for expert guidance and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ABT.120-5DNM Manufacturer: KERN GTIN: 4045761185531 SKU: ABT.120-5DNM Facts Readability: 0.00001 g; 0.0001 g Weighing ranges: 42 g; 120 g Minimum sample weight: 0.001 g Linearity: ± 0.00005 g; 0.0002 g Reproducibility: 0.00002 g; 0.0001 g Pan diameter: 80 mm Display digit height: 14 mm Operating temperature: 10 °C to 30 °C Max ambient humidity: 80% Net weight: 7.5 kg Verification class: I Commodity code: 90160010 Origin: PH Power supply: 220 V–240 V AC, 50 Hz Special features Single Cell weighing system Internal automatic calibration (temperature-triggered and time-controlled) High-stability mode and selectable filters for dosing Combined tare and print function with automatic component numbering GLP-compliant calibration protocol printout Automatic data output to PC/printer after each stabilisation Large glass draft shield with three sliding doors Protective work cover included Stainless steel weighing pan Supplied with CH, EU, UK and US plug adapters Supplied with mains plug power adapter FAQ What accuracy can be expected for micro-weighing tasks? The KERN ABT 120-5DNM achieves readabilities of 0.00001 g and 0.0001 g depending on range, delivering the fine accuracy required for micro-weighing and trace-component analysis. How does the automatic calibration work? Automatic calibration occurs internally when the temperature changes by ≥ 0.5 °C or at scheduled intervals (every 4 hours by default), ensuring the balance maintains consistent accuracy without manual intervention. Is the balance suitable for regulated environments requiring GLP records? Yes. The instrument produces GLP-compliant calibration protocols and supports immediate printouts; the combined tare/print function also documents recipe component numbers and weights for traceable records. Can data be exported to a PC or printer automatically? Automatic data output is sent to a connected PC or printer after each stabilisation, simplifying documentation and integration into laboratory data workflows. What features aid accurate dosing and portioning? High-stability mode and selectable digital filters stabilise readings faster and reduce fluctuations during dosing, while the combined tare/print function supports numbered ingredient documentation. KERN — Address: not provided — Contact: not provided
120g Precision Analytical Balance 0.0001g Readability Single-Cell Weighing System, Internal Calibration, Draft Shield - KERN
Take advantage of precise measurement performance, automated stability control and straightforward data output for reproducible results and efficient laboratory workflows. Order directly via Metav Werkzeuge or consult our specialists for calibration and configuration options. KERN ACJ 100-4M analytical balance — 0.0001 g readability, Single‑Cell system The KERN ACJ 100-4M is an analytical balance designed for pharmacies, food and environmental laboratories, and R&D tasks requiring ultra‑fine weighing with robust data handling Bestseller with single-cell weighing system Readability 0.0001 g for fine measurements Built-in auto-adjustment for stable results Protective draft shield included for safety Precise weighing for exact results in routine analysis The analytical balance delivers a readability of 0.0001 g across a weighing range of 120 g, ensuring that even the smallest sample masses are captured with dependable precision. The single‑cell weighing system centralises the load path, reducing mechanical influences and improving the signal‑to‑noise ratio; this translates into more reliable mean values and tighter tolerances for standard operating procedures. Linearity of ±0.0003 g and repeatability of 0.0002 g further support traceable results suitable for documentation and quality control tasks. Automated stabilisation and dosing support for efficient workflows An internal automatic adjustment reacts to temperature changes ≥ 2 °C and runs a timed calibration cycle every four hours, which preserves measurement integrity in variable environments. The instrument’s dosage aid includes a high‑stability mode and selectable filter settings to reduce fluctuations during addition, making formulation and microdosing tasks faster and less error‑prone. Automatic output to PC or printer after each stabilisation reduces manual transcription and speeds up batch documentation for process control. Practical features that simplify documentation and compliance Recipe handling is eased by a combined tare/print function that numbers and prints each component with its weight, supporting reproducible formulations and audit trails. A programmable four‑digit balance ID is recorded in the calibration protocol, assisting in instrument traceability during internal or external reviews. For applications subject to legal verification, the balance is available with conformity to NAWI 2014/31/EU when ordered with the appropriate calibration; note that first‑time verification must be requested at purchase and requires the installation address. Built for laboratory environments with user convenience in mind The balance arrives with a protective draft shield to minimise air currents and maintain measurement stability during handling. The housing is made of durable plastic with a stainless steel weighing pan (91 mm diameter), and the clear LCD display has a digit height of 14 mm for quick read‑outs. Power is supplied via a plug‑in adapter with CH, EURO, UK and US plugs included, enabling straightforward setup in international laboratories. Operating temperature range is 10 °C–30 °C, matching typical lab conditions. Contact Metav Werkzeuge for customised advice on calibration, configuration and delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ACJ.100-4M Manufacturer: KERN Article number: TACJ-A GTIN: 4045761235649 Country of origin: PH Core specifications Weighing range: 120 g Readability: 0.0001 g Repeatability: 0.0002 g Linearity: ± 0.0003 g Minimum sample weight: 0.01 g Pan diameter: 91 mm Balance weight: 6.27 kg Operating temperature: 10 °C–30 °C Power input: 110 V–230 V AC Display digit height: 14 mm Features & materials Single‑cell weighing system Internal automatic adjustment (≥ 2 °C / every 4 h) Dosage aid with high‑stability mode and filters Combined tare/print function; automatic component numbering Automatic data output to PC/printer after each stabilisation 4‑digit programmable balance ID printed in calibration protocol Protective draft shield included Housing: plastic; weighing pan: stainless steel Plug adapters included: CH; EURO; UK; US Legal verification class: I (eichwerte 0.001 g) FAQ How accurate is the KERN ACJ 100-4M for microgram work? The KERN ACJ 100-4M analytical balance offers a readability of 0.0001 g, repeatability of 0.0002 g and linearity of ±0.0003 g, making it suitable for microgram‑level tasks within a 120 g range. Can the balance be integrated with laboratory software or printers? Yes. The instrument provides automatic data output to PC or printer after each stabilisation, enabling seamless documentation and reduction of manual entry errors. Is an official calibration (legal verification) available for this model? Legal verification under NAWI 2014/31/EU can be ordered at purchase; the KERN ACJ 100-4M requires the installation address for first‑time verification and cannot be retrofitted later. What environmental conditions are required for reliable operation? Stable operation is achieved within 10 °C–30 °C and up to 85% relative humidity; the internal automatic adjustment also compensates for temperature changes ≥ 2 °C for maintained accuracy. What accessories and supplies are included with delivery? Delivery includes a protective draft shield, the stainless steel weighing pan and a plug‑in power adapter with CH, EURO, UK and US plugs; further accessories may be ordered separately. Manufacturer: KERN — Address: — — Contact: —
120g Precision Analytical Balance 0.0001g Readability, CAL Adjustment, Glass Draft Shield, Stainless Steel Pan - KERN
Benefit from precise laboratory weighing with 0.0001 g readability and a robust stainless‑steel pan, combined with the user‑friendly CAL adjustment programme for repeatable results. Order the instrument directly via Metav Werkzeuge or contact our consultants for tailored technical advice. KERN ADB 100-4 — analytical balance with 120 g capacity and 0.0001 g readability The KERN ADB 100-4 is an analytical balance engineered for laboratories, education and quality control, offering high‑precision weighing, a three‑door glass draft shield and an integrated calibration programme for reliable measurement workflows. 0.0001 g readability and 120 g capacity Integrated CAL adjustment programme Large three‑sided glass draft shield Stainless steel pan and plastic housing Precision for critical measurements The balance delivers 0.0001 g readability and a reproducibility of 0.0002 g, which supports tasks where the smallest deviation matters. The instrument uses a force‑compensation weighing system, a design that converts load into a proportional electromagnetic force, providing stable readings and low drift. Linearity is specified at ± 0.0004 g, which ensures that measurements across the weighing range remain consistent; this technical stability reduces rework and accelerates decision‑making in analytical routines. Designed for efficient laboratory workflows A large glass draft shield with three sliding doors gives unobstructed access to the pan while protecting samples from air currents, improving measurement stability for microgram‑level work. The 90 mm stainless‑steel pan is quick to clean and resistant to routine laboratory chemicals. Level bubble and adjustable feet allow precise levelling, assisting in reproducible results after installation. The compact housing and LCD display with clear 16 mm digits support rapid reading and minimise handling time during repetitive procedures. Reliable calibration and traceability Equipped with a CAL adjustment programme, the unit can be stabilised to maintain accuracy over time; internal or external calibration (external weights available at extra cost) supports traceability and compliance where required. The balance accepts standard mains voltages (100–265 V, 50–60 Hz) and includes adapters for EU, UK and US plugs, facilitating immediate deployment across different labs. These features simplify documentation and help integrate the balance into quality assurance protocols without extensive setup. Fit for education, laboratories and quality control The instrument is suitable for teaching labs, routine analytical work and quality control stations where reliable microgram resolution is required. Lightweight at 4.4 kg and compact in size, it fits constrained bench spaces while the robust construction and easy six‑button operation reduce user training time. Clear specification of minimum sample handling and built‑in stabilising features support consistent measurement performance across users and shifts. Contact Metav Werkzeuge today for personalised advice on integrating the KERN ADB 100-4 into your laboratory setup and to arrange supply from our Emmerich hub Technical Data Article number: ADB-A SKU: ADB.100-4 Manufacturer: KERN GTIN: 4045761203228 Country of origin: CN Data Readability: 0.0001 g Capacity: 120 g Pan diameter: 90 mm Reproducibility: 0.0002 g Linearity: ± 0.0004 g Weight: 4.4 kg Operating temperature: 10 °C–30 °C Max ambient humidity: 85 % Power input: 100–265 V; 50–60 Hz; 2.0 A Display digit height: 16 mm Special features Housing material: plastic; weighing pan: stainless steel Weighing system: force compensation Draft shield: large glass with three sliding doors Levelling: spirit level and adjustable feet Operation: six‑button keypad Calibration: CAL adjustment programme; external test weights optional Power supply: plug‑in adapter included for EU, UK, US Display type: LCD Commodity code: 90160010 FAQ Is the balance suitable for USP‑compliant measurements? The ADB 100‑4 supports USP workflows when used with appropriate minimum sample handling; the CAL adjustment programme and external test weights (available separately) enable validation in line with USP requirements. How often should the balance be calibrated? Calibration frequency depends on usage and environmental conditions; the integrated CAL adjustment programme in the KERN analytical balance simplifies routine checks and helps maintain traceability between formal calibrations. Can the balance be used immediately in labs with different mains voltages? Yes, the unit includes plug‑in adapters for EU, UK and US, and accepts 100–265 V, 50–60 Hz, allowing immediate use without additional power conversion. What maintenance is required to ensure long‑term precision? Regular cleaning of the stainless‑steel pan and draft shield, periodic levelling using the spirit level and feet, and routine calibration via the CAL programme or external weights will preserve the balance’s performance. Is the instrument appropriate for educational settings? The compact footprint, simple six‑button operation and robust design make this analytical balance well suited to teaching laboratories and training environments. Manufacturer: KERN — Distributed by Metav Werkzeuge, Emmerich am Rhein, Germany · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930
120g Precision Analytical Balance 0.0001g Readability, Internal Auto-Calibration, OLED Display, Single-Cell System - KERN
Take advantage of premium precision and fast stabilisation: the combination of Single Cell technology, readability 0.0001 g and an internal automatic calibration cycle ensures rapid, reproducible weighing for demanding laboratory and quality‑control tasks. Order the device directly via Metav Werkzeuge or contact our consultants for technical advice and delivery from Emmerich. KERN ABP.100-4M analytical balance — Single Cell, 0.0001 g readability The ABP.100-4M is a premium analytical balance designed for ultra‑fast, ultra‑precise weighing in pharmaceutical, R&D and quality‑control environments. Single Cell generation for fast stabilisation Readability 0.0001 g for ultra‑fine results Internal automatic calibration after temp change U.S. FDA 21 Part 11 support for data integrity Faster, more reliable measurement for critical workflows The latest Single Cell weighing system delivers significantly reduced settling times while maintaining exceptional accuracy across a wide range. With a weighing range of 120 g and readability 0.0001 g, the instrument produces dependable results for micro‑quantities; reproducibility 0.0001 g and linearity ±0.0002 g ensure consistency between runs. The supplied multifunction weighing pan and enclosed draft shield shorten the time to stable readings by reducing air‑flow influences, which is particularly valuable when handling small samples or volatile substances. These technical benefits translate into fewer re‑weighs and a smoother production flow. Secure data handling and streamlined laboratory routines Workflows are simplified by an intuitive menu structure with a navigation cross, combined tare/print recipe management and a dosing aid that supports selectable filters and a high‑stability mode for precise dosing. The balance supports RS‑232 and USB (Device and Host) interfaces for seamless data transfer; automatic data‑output after each stable reading reduces manual record keeping. For regulated environments, dedicated support for U.S. FDA 21 Part 11 helps maintain audit trails for weighings, sample IDs and user actions. User profiles for up to ten operators, barcode‑triggered settings and a guest mode facilitate multi‑user labs while preserving access control for calibration and recipe modification. Practical design that supports daily lab needs A large glass draft shield with three sliding doors and a stainless steel weighing pan (91 mm) provide easy access and straightforward cleaning, while an OLED display with 14 mm digits keeps readouts clear at a glance. The internal automatic calibration operates when ambient temperature shifts by ≥1°C and additionally on a time‑controlled 4‑hour cycle, stabilising accuracy across changing conditions and enabling reliable stand‑alone operation. The instrument is designed for standard laboratory environments (operating range 10°C–30°C, max. relative humidity 80%) and ships with power adapters for CH, EURO, UK and US mains, allowing rapid commissioning in diverse locations. For tailored specification advice and delivery from our Emmerich warehouse, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss the KERN ABP.100-4M and suitable accessories Technical Data Article number: TABP-A SKU: ABP.100-4M GTIN: 4045761213890 Manufacturer: KERN Origin: PH Core specifications Weighing range: 120 g Readability: 0.0001 g Reproducibility: 0.0001 g Linearity: ±0.0002 g Minimum weight (USP): 0.01 g Weighing pan diameter: 91 mm Display digit height: 14 mm Net weight: 7.9 kg Operating temperature: 10°C–30°C Max. relative humidity: 80% Power supply: 220–240 V AC, 50 Hz Special features Weighing system: Single Cell Internal automatic calibration (temp‑triggered ≥1°C; time‑controlled every 4 h) OLED display Glass draft shield with 3 sliding doors Stainless steel weighing pan Multifunction weighing pan for improved stabilisation RS‑232 and USB (Device and Host) interfaces U.S. FDA 21 Part 11 support for data integrity User management for up to 10 users Recipe printing with combined tare/print function Power adapters included: CH, EURO, UK, US FAQ What is the smallest increment the balance can reliably display? The KERN ABP.100-4M analytical balance displays with a readability of 0.0001 g and a practical minimum sample weight of 0.01 g for routine applications. Can the balance be integrated with laboratory software and printers? Yes. The ABP.100-4M offers RS‑232 and USB (Device and Host) interfaces and supports automatic data output after each stable reading for direct connection to PCs or printers. How does the calibration work on this model? The unit features an internal automatic calibration which triggers when the ambient temperature changes by ≥1°C and additionally performs time‑controlled calibration every 4 hours to maintain accuracy. Is this balance suitable for pharmaceutical or regulated environments? Yes. The KERN ABP.100-4M includes features relevant to regulated labs, including audit‑capable data output and U.S. FDA 21 Part 11 support for data integrity and traceability. What accessories and items are supplied with the balance? Delivery includes the multifunction weighing pan, a protective cover, a large glass draft shield with three sliding doors and mains adapters for CH, EURO, UK and US markets. KERN · Origin: PH · Contact details not provided
120g Precision Analytical Balance 0.0001g Readability, Internal Automatic Calibration, 90mm Pan, LCD Display - KERN
Take advantage of the combination of ultra-fine readability, automatic internal calibration and a compact footprint for consistent, compliant weighing results in labs and teaching environments; order directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN ADJ 100-4 – analytical balance with 0.0001 g readability and internal calibration The KERN ADJ 100-4 is an analytical balance designed for laboratories, quality control and educational use, offering ultra-fine measurement resolution with an internal adjustment system for stable results. Readability 0.0001 g for ultra-fine weighing Internal automatic calibration for temperature changes Glass draft shield with 3 sliding doors for easy access Stainless steel pan Ø 90 mm and LCD display 18 mm Precision in everyday laboratory tasks This analytical instrument uses electromagnetic force compensation to deliver a readability of 0.0001 g, making it suitable where smallest mass differences matter. The balance combines high resolution with dependable reproducibility 0.0002 g and linearity ±0.0004 g, ensuring that measurements remain comparable across repeated runs. For users less familiar with the terminology, electromagnetic force compensation is a common professional method that converts the measured weight into an electrical signal, yielding fast stabilisation and reliable digit-to-digit consistency. The compact housing and clear display support efficient bench-top workflows. Built-in stability for changing conditions With an internal auto-adjustment routine triggered by temperature shifts of ≥ 2 °C and time-controlled re-calibration every 3 hours, the unit maintains accuracy without frequent manual intervention. The instrument is supplied with a level vial and levelling feet for precise siting; correct levelling is essential to achieve the specified performance figures. The included glass draft shield with three sliding doors reduces air currents while allowing simple access to samples, so small masses can be handled without compromising the reading. Practical features that support daily use Operation is straightforward thanks to a 6-key user interface and a clear LCD with 18 mm digit height, which improves readability in busy or dimly lit environments. The 90 mm stainless steel weighing pan provides a durable surface for routine sample handling and is compatible with common lab accessories. Power is provided by a plug-in adapter with EU, UK and US plugs included, simplifying deployment across international sites. The instrument supports both internal and external calibration modes, offering flexibility for laboratories that require traceable external standards. Application scope and compliance considerations The balance is suitable for teaching laboratories, routine lab applications and quality control tasks where small sample masses are involved. It supports piece-counting down to 1 mg in laboratory counting mode and standard counting at 10 mg, making it useful for smaller component inventories. Note that the minimum sample weight (USP) is an important parameter for pharmaceutical applications; it indicates the smallest mass that yields results compliant with USP tolerances. For formal compliance testing, the auto-calibration feature reduces environmental influences on measurement uncertainty, supporting reproducible outcomes. Contact Metav Werkzeuge today for product availability, calibration options and expert guidance on integrating the KERN ADJ 100-4 into your lab workflow from our Emmerich location Technical data Article number: ADJ.100-4 Manufacturer: KERN GTIN: 4045761214019 Country of origin: CN Tariff code: 90160010 Core measurements Weighing range: 120 g Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ± 0.0004 g Weighing pan diameter: 90 mm Display digit height: 18 mm Weight: 5 kg Operating temperature: 10 °C – 30 °C Max. relative humidity: 85% Power input: 100–265 V; 50–60 Hz; 2.0 A Design & special features Weighing system: electromagnetic force compensation Internal automatic calibration (temperature-triggered and time-controlled) Glass draft shield with three sliding doors Housing material: plastic; weighing plate: stainless steel Levelling vial and adjustable feet included 6-key operation panel EU / UK / US plug adapters included Counting resolution: laboratory mode 1 mg; normal mode 10 mg Suitable for: educational institutions, laboratory applications, quality control FAQ How often does the balance perform internal calibration? The balance performs automatic internal calibration when ambient temperature changes by ≥ 2 °C and is time-controlled to run every 3 hours, ensuring ongoing accuracy for the KERN ADJ 100-4 analytical balance. Is the ADJ 100-4 suitable for teaching laboratories? Yes; the KERN ADJ 100-4 is designed for laboratory and educational use with robust features such as a glass draft shield, simple 6-key operation and plug adapters for EU, UK and US sockets. What is the minimum sample weight relevant to USP requirements? The minimum sample weight (USP) depends on the required tolerance and uncertainty; the ADJ 100-4’s high resolution and internal calibration help achieve the low uncertainty needed for many USP-relevant determinations. Can the balance be calibrated externally? Yes; the unit supports both internal calibration and external calibration procedures, allowing traceable checks against certified mass standards when required. What environmental conditions must be observed for accurate results? Operation is specified for 10 °C to 30 °C and relative humidity up to 85%; correct levelling and shelter from drafts (using the glass draft shield) are essential for the stated performance. Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
120g Precision Analytical Balance Single-Cell Weighing System 0.0001g Readability, LCD Display, Draft Shield - KERN
Take advantage of the combination of ultra-fine readability, a robust Single Cell weighing system and convenient automatic data output to ensure reproducible results and traceable documentation; order the instrument directly via Metav Werkzeuge or ask our consultants for application-specific advice. KERN ACS 100-4 — Analytical balance with 0.0001 g readability and Single Cell system The KERN ACS 100-4 is an analytical balance tailored for laboratories, pharmacies and quality control environments, providing ultra-fine weighing up to 120 g with a high-stability mode and versatile output options Single-Cell weighing system for precise results Readability 0.0001 g for ultra-fine measurement CAL adjustment and external test weights option Integrated draft shield and automatic data output Ensure compliance with reliable, laboratory-grade precision The KERN ACS 100-4 delivers laboratory-grade precision by combining a high-resolution reading of 0.0001 g with a reproducibility of 0.0002 g and a linearity of ± 0.0003 g. The Single Cell weighing system concentrates the load sensing in a single, optimised element, reducing mechanical influences and simplifying maintenance. The integrated CAL adjustment program permits systematic verification of accuracy; where legally required or for higher certainty, external calibration weights can be used. These measures support repeatable processes and help meet documentation needs in regulated environments. Integrated data handling that speeds up workflows Documenting and transferring measured values is made straightforward: the balance offers automatic data output to PC or printer after each stabilisation, and a combined tare/print function for efficient recipe and batch documentation. The weighing unit prints or transmits an automatically incremented component number together with the weight value, so formulation and sample records are produced with minimal manual steps. A freely programmable four-digit identification number is printed on the adjustment protocol, enabling clear traceability of individual instruments in a multi-balance laboratory network. Built to support daily laboratory routines Designed for frequent use, the instrument includes a protective draft shield to minimise disturbances from air currents and an ergonomically sized weighing pan (Ø 91 mm) mounted on a stainless-steel plate for easy cleaning. The housing is made from durable plastic while the weighing plate is stainless steel, balancing robustness with lightweight design (approx. 5.75 kg). Multiple plug adapters are supplied (CH, EURO, UK, US) to accommodate international power supplies. Operating conditions between 10°C and 30°C and a maximum relative humidity of 85% ensure stable performance in typical laboratory environments. These practical details reduce downtime and make day-to-day handling efficient. Purpose-fit for regulated sectors and precise analyses The instrument’s feature set is aligned with the needs of pharmacies, food analysis, environmental laboratories, the chemical industry and research and development. Automatic output routines, recipe documentation and a high-stability mode with selectable filters aid precise dosing and minimise operator-induced variability. For tasks that require counting, the device supports fine piece counting down to 1 mg in laboratory mode and 10 mg in standard counting mode, enabling both analytical and routine quality-control applications with one instrument. Contact Metav Werkzeuge today for tailored configuration advice or to request technical documentation; Metav’s team in Emmerich supports selection and ensures fast, reliable delivery directly from stock — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical data Article number: ACS.100-4 (SKU ACS.100-4) Manufacturer: KERN GTIN: 4045761235694 Origin country: PH Data Weighing range max: 120 g Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ± 0.0003 g Display digit height: 14 mm Weighing pan diameter: 91 mm Housing dimensions: 210 × 345 × 328 mm Weight: 5.75 kg Operating temperature: 10°C–30°C Max. ambient humidity: 85% Input voltage: 110 V–230 V AC Special features Housing material: plastic; weighing plate: stainless steel Weighing system: Single Cell Adjustment program: CAL (adjustment) High-stability mode and selectable filters Combined tare/print function for recipe documentation Automatic data output to PC/printer after each stabilisation Programmable 4-digit instrument identification number Draft shield included Supplied adapters: CH; EURO; UK; US Typical applications: pharmacies; food analysis; environmental analysis; chemical industry; research & development FAQ How precise is the balance for routine analytical work? The KERN ACS 100-4 analytical balance (KERN, SKU ACS.100-4) provides a readability of 0.0001 g, reproducibility of 0.0002 g and linearity of ± 0.0003 g, which supports high-precision analyses and reproducible results in laboratory settings. Does the instrument support calibration without disassembly? Yes. The device includes a CAL adjustment programme for setting and documenting accuracy; external test weights can be used for traceable calibration where required. How are weighing results exported or recorded? Results are sent via automatic data output to PC or printer after each stabilisation. The balance also offers a combined tare/print routine and prints incremented component numbers for recipe documentation. Is this balance suitable for pharmaceutical applications? The KERN ACS 100-4 is designed for pharmacies and regulated environments, offering ultra-fine readability and documentation functions that assist compliance with standard laboratory practices. What are the environmental and power requirements? The instrument operates on 110 V–230 V AC (supplied plug adapters for CH/EU/UK/US) and is specified for ambient temperatures between 10°C and 30°C with a maximum relative humidity of 85%. Manufacturer: KERN — Address: Philippines (origin) — Contact: not provided
135 g Analytical Balance 0.00001 g Readability, Single-Cell, Internal Auto-Calibration, 91 mm Pan Ø - KERN
Take advantage of the combination of ultra-fine resolution, rapid stabilisation and reliable data interfaces for efficient laboratory workflows; the integrated automatic calibration and robust draft-shield design ensure consistent results and traceable records. Order the ABP 100-5M directly via Metav Werkzeuge or ask our consultants if needed. KERN ABP 100-5M — Analytical balance with Single Cell system and 0.00001 g readability The ABP 100-5M is a premium single-range half-micro analytical balance designed for pharmaceutical, quality‑control and research laboratories requiring rapid, high‑resolution weighing in a compact footprint. Ultra-fine readability 0.00001 g Single-Cell weighing system for speed Internal automatic calibration Large 3-door glass draft shield Faster, more reliable weighing for critical tasks The combination of the Single Cell weighing system and a readability of 0.00001 g delivers exceptionally fast and stable results compared with conventional designs. Shorter settling times reduce cycle duration, increasing throughput in routine analyses. With a reproducibility of 0.00005 g and linearity of ±0.0002 g, the instrument provides a measurable basis for precise dosing and gravimetric determinations, supporting the accuracy demands of pharmaceutical QC, R&D and industrial laboratories while keeping documentation requirements straightforward. Traceability and documented workflows built in Integrated internal automatic calibration triggered at temperature shifts ≥ 1 °C and time‑controlled every 4 hours maintains measurement integrity without manual intervention. The balance supports user profiles for up to 10 operators, combined Tare/Print recipe handling and automatic numbering of batch components for clear records. Data transfer is available via RS-232 and USB (Device), with USB Host support for keyboard entry; support for U.S. FDA 21 Part 11 enhances data integrity where regulated record keeping is required. The device issues a warning for weighings below the set minimum sample weight (MSW), helping to prevent invalid results during traceable procedures. Ergonomic design that supports everyday lab work A large glass draft shield with three sliding doors permits comfortable access to the weighing chamber while minimising air‑flow disturbance; the supplied multifunction weighing plate further reduces settling times and aids handling of small vessels such as microcentrifuge tubes. The OLED display with 14 mm digit height provides clear readouts; the 91 mm weighing pan accommodates common laboratory samples while the compact housing (220 x 370 x 350 mm) and 7.9 kg mass make installation and bench placement straightforward. Power adaptors for AUS, CH, EURO, UK and US are included to suit different regions, and the operating range of 10°C to 30°C with up to 80% relative humidity allows stable performance in controlled lab environments. Compliance, flexibility and application scope Classified for precision use (Eichklasse I) and designed for applications including pharmaceutical analysis, quality control and research, the instrument supports advanced weighing modes such as dosing assistance and selectable stability filters to tailor performance to the task. The minimum sample weight guidance aligns with USP considerations for micro‑weighings, while automatic data output after each stable reading simplifies logging to PC or printer. Built for demanding tasks, the balance combines precision, documentation features and practical laboratory ergonomics in one compact instrument. For detailed advice on suitability, calibration needs and data‑integration with KERN’s ABP 100-5M, contact Metav Werkzeuge in Emmerich: email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and ordering support Technical Data Article number: TABP-A SKU: ABP.100-5M GTIN: 4045761250314 Manufacturer: KERN Country of origin: PH Numbers / Core technical data Weighing range: 135 g Readability: 0.00001 g Reproducibility: 0.00005 g Linearity: ±0.0002 g Minimum sample weight: 0.001 g Weighing pan diameter: 91 mm Display digit height: 14 mm Net weight: 7.9 kg Operating temperature: 10°C–30°C Max ambient humidity: 80% Special features Single Cell weighing system Internal automatic calibration (temperature/time controlled) Large glass draft shield with 3 sliding doors Multifunction weighing plate included RS-232 and USB (Device and Host) interfaces U.S. FDA 21 Part 11 support for data integrity User profiles for up to 10 users; guest mode available Menu languages: DE, EN Power adaptors: AUS, CH, EURO, UK, US Class I (Eichklasse I) Multifunctional recipe/print capabilities FAQ What weighing range and resolution does the balance offer? The ABP 100-5M provides a weighing range of 135 g with a readability of 0.00001 g, suitable for micro and semi‑micro analytical tasks. How does internal calibration work on this model? Internal automatic calibration is activated at temperature changes ≥ 1 °C and at timed intervals (every 4 hours), maintaining the ABP 100-5M’s accuracy without manual weights. Can the balance record operator and sample information? Yes. The instrument supports up to 10 user profiles with printable user names/IDs and combined tare/print recipe documentation for clear traceability in regulated environments. Which interfaces are available for data transfer? The ABP 100-5M includes RS-232 and USB Device interfaces, plus USB Host functionality for keyboard entry, enabling straightforward integration with PCs and printers. Is the device suitable for pharmaceutical and QC laboratories? Designed for pharmaceutical applications, quality control and research, the ABP 100-5M includes recipe printing, data integrity features and minimum sample weight warnings to support compliant workflows. Manufacturer: KERN — Manufactured in PH — Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930
160 g Precision Analytical Balance 0.0001 g Readability, Graphic Display, CAL Calibration - KERN
Take advantage of precise 0.0001 g readability combined with a compact footprint and integrated recipe functions for consistent, efficient weighing — order directly via Metav Werkzeuge or consult our advisors for specification support. KERN ALS 160-4A — analytical balance with high resolution and graphic display The KERN ALS 160-4A is an analytical balance designed for laboratories, pharmaceutical use and materials testing, offering high-resolution weighing, a clear graphic display and built-in recipe functions for controlled dosing and complex formulations. Graphic display with multilingual plain-text prompts High resolution 0.0001 g for precise measurements Integrated recipe memory with name and target values Large three-door glass draft shield for easy access Reliable accuracy for trace-sensitive tasks High-resolution performance is central to the instrument’s benefit: the device delivers a readability of 0.0001 g, supported by a linearity of ±0.0003 g and reproducibility of 0.0001 g, which together ensure consistent results for delicate measurements. The concept of minimum sample weight (USP) is supported as a quality metric for legal and pharmaceutical workflows; it shows the smallest mass at which stated accuracy can be expected. By relying on these specifications, laboratories reduce rework and improve method validation, translating technical precision into reproducible outcomes on the bench. Faster workflows with guided handling and recipe control A graphic display with clear, multilingual prompts simplifies operation and shortens training time, while the recipe memory stores complete formulations with component names and target values to speed repetitive processes. The balance’s checkweighing function allows upper and lower tolerance limits to be entered so that optical and acoustic signals assist in portioning and sorting. This combination reduces operator error, supports traceable batch production and makes dosing tasks measurably more efficient in busy laboratory or production environments. Stable weighing and ergonomic design for daily use Stable readings are achieved quickly thanks to a short settling time that returns reliable values in approximately four seconds under laboratory conditions; adjustable filters and a high-stability mode further improve repeatability when required. Handling is aided by an ergonomically optimised keypad suitable for left- and right-handed users and a three-door glass draft shield that provides comfortable access to the sample while protecting against air currents. The stainless steel weighing pan and compact housing keep maintenance straightforward and suit confined bench spaces without compromising performance. Built-in calibration and practical accessories for integration Accuracy management is supported by the CAL justifying program for easy adjustment using external calibration weights (available separately), and the force compensation weighing system ensures long-term stability. Optional accessories such as the ioniser (ALJ-A03) neutralise electrostatic charge to improve weighing of lightweight or non-conductive samples. Multiple plug adapters are supplied for AUS, CH, EURO, UK and US mains, easing international deployment. These features allow the balance to be integrated into regulated workflows in pharmaceuticals, R&D and material testing with minimal adaptation. Choose KERN precision through Metav Werkzeuge — rely on our Emmerich-based quality filter for fast supply and expert advice; contact Metav Werkzeuge for detailed technical consultation via info@metav-werkzeuge.com or by phone Technical data Article number: TALSG-A SKU: ALS.160-4A Manufacturer: KERN GTIN: 4045761243033 Origin country: CN Customs tariff number: 90160010 Facts Capacity: 160 g Readability: 0.0001 g Linearity: ±0.0003 g Reproducibility: 0.0001 g Weighing pan diameter: 80 mm Weighing chamber W×D×H: 160×170×225 mm Dimensions (housing without removable parts): 210×340×330 mm Weight: 6.2 kg Operating temperature: 5 °C to 35 °C Maximum relative humidity: 80 % Power supply adapters included: AUS; CH; EURO; UK; US Display digit height: 17 mm Weighing system: force compensation Special features Graphic display with plain-text user guidance in DE, EN, FR, IT, ES, PT Short settling time for fast stable readings (approx. 4 s) CAL justifying program for calibration with external weights Checkweighing with optical and acoustic signals Internal recipe memory for complete formulations Dosage aids including high-stability mode and adjustable filters Large glass draft shield with three sliding doors Ergonomic keypad for left- and right-handed operation Stainless steel weighing pan Optional ioniser ALJ-A03 for neutralising electrostatic charge FAQ How is calibration performed on this analytical balance? Calibration is performed using the integrated CAL program; the KERN ALS 160-4A supports adjustment with external calibration weights to ensure ongoing accuracy. What is the smallest reliably weighable sample for precise results? The KERN ALS 160-4A offers a readability of 0.0001 g; minimum sample weight considerations such as the USP minimum sample weight should be applied to determine reliable results for specific methods. Can the draft shield be opened easily for dosing tasks? The three-door glass draft shield allows comfortable access to the weighing pan while maintaining protection from air currents, making dosing and sample placement straightforward. Is the balance suitable for pharmaceutical or research laboratory use? Yes, the instrument is intended for pharmaceutical applications, research and materials testing where high resolution, recipe management and traceable checkweighing are required. Does the balance support electrostatic neutralisation for light samples? An optional ioniser (ALJ-A03) is available to neutralise electrostatic charge and improve weighing performance for lightweight or non-conductive samples when fitted KERN — Origin: China; no further manufacturer address or direct contact provided
160 g Precision Analytical Balance 0.0001 g Readability, Graphic LCD, Internal Calibration, Three-Slide Draft Shield - KERN
Take advantage of the combination of ultra-fine readability 0.0001 g, a 160 g weighing range and integrated recipe management for reliable, efficient laboratory workflows. Order the KERN ALJ 160-4A direct via Metav Werkzeuge or consult our specialists for application advice. KERN ALJ 160-4A analytical balance — 160 g range, 0.0001 g readability A KERN ALJ 160-4A analytical balance engineered for high-precision weighing, rapid result stabilisation and guided recipe handling in laboratory and pharmaceutical environments Graphic LCD for fast, clear operation Internal automatic calibration for stability Readability 0.0001 g for ultra-fine weighing Large three-door glass draft shield for access High-precision results that stabilise quickly The balance delivers consistent precision with a readability of 0.0001 g and a linearity of ±0.0003 g, making it suitable for sensitive analytical tasks. The force-compensation weighing system reduces drift and, combined with the internal automatic calibration, ensures measurements remain trustworthy even in changing conditions. Short settling time produces stable readings within approximately 4 seconds under laboratory conditions, which improves throughput and reduces waiting periods during routine analyses. Streamlined dosing and recipe workflows Equipped with a graphics display and clear on-screen instructions in multiple languages, the instrument supports internal recipe storage with names and target values for each ingredient. This feature simplifies repetitive formulations and reduces transcription errors: operators can follow the display-supported prompts and use the built-in checkweighing with upper and lower limits to verify portions, aided by optical and acoustic signals. The result is efficient dosing, reproducible mixtures and fewer process interruptions. Practical design for everyday laboratory use Ergonomic controls and a glass draft shield with three sliding doors provide comfortable access for left- and right-handed users while maintaining a protected weighing environment. The stainless steel weighing pan (Ø 80 mm) and a compact housing save benchtop space without compromising functionality. Multiple filter settings, including a high-stability mode, allow adaptation to local conditions such as drafts or vibrations, so routine tasks remain dependable. Robust construction and compliance-ready operation Built with a plastic housing and a stainless steel pan, the unit is designed for regular laboratory use and easy cleaning. The weighing chamber measures 160 × 170 × 225 mm (W×D×H), and the instrument operates reliably between 5 °C and 35 °C with a maximum ambient humidity of 80 %. Additional options, such as an ioniser for neutralising electrostatic charge, are available for demanding applications. The combination of repeatability of 0.0001 g and integrated features supports pharmaceutical, materials testing and research workflows that require traceable, reproducible results. Contact Metav Werkzeuge for tailored advice on integrating the KERN ALJ 160-4A into existing laboratory processes — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt guidance Technical data Article number: TALJG-A SKU: ALJ.160-4A Manufacturer: KERN GTIN: 4045761242906 Core specifications Weighing range: 160 g Readability: 0.0001 g Reproducibility: 0.0001 g Linearity: ±0.0003 g Weighing pan diameter: 80 mm Weighing chamber (W×D×H): 160×170×225 mm Display digit height: 15 mm Operating temperature: 5 °C–35 °C Max. ambient humidity: 80 % Net weight: 6.5 kg HS code: 90160010 Design & special features Graphic LCD display Internal automatic calibration Internal recipe memory with names and target values Multilingual clear-text user guidance (DE, EN, FR, IT, ES, PT) Ergonomic keypad for left- and right-handed operation Large three-door glass draft shield Housing made from plastic; weighing plate stainless steel Power adapters included for AUS; CH; EURO; UK; US High-stability mode and selectable filters Optional ioniser ALJ-A03 for electrostatic neutralisation FAQ How quickly does the balance deliver stable readings? The balance achieves stable weighing values within approximately 4 seconds under standard laboratory conditions, enabling faster decision-making and higher throughput with the KERN ALJ 160-4A analytical balance. Can the instrument store formulations and guide dosing? Yes. The ALJ 160-4A has an internal recipe memory that saves component names and target values; the display supports guided dosing and checkweighing with optical and acoustic signals. Is the balance suitable for pharmaceutical and research tasks? The balance is intended for pharmaceutical applications, material testing and research and development, offering the precision and features required for controlled laboratory processes. What measures counteract electrostatic effects on small samples? An optional ioniser (ALJ-A03) is available to neutralise electrostatic charging; this accessory integrates into the balance for easier handling of lightweight or electrostatically sensitive samples. Which power connections are supplied with the device? The unit is supplied with mains adapters for several regions (AUS; CH; EURO; UK; US) to match local power requirements. Manufacturer: KERN; Origin: CN; Contact: not provided in product data
160g Analytical Balance With 0.0001g Readability, 80mm Pan, Internal Auto-Calibration, Graphic LCD, Class I - KERN
Take advantage of high-resolution weighing with built-in automatic calibration and a compact footprint for consistent laboratory throughput. Trust the combination of 0.0001 g readability, internal automatic calibration and robust stainless-steel components for repeatable results. Order the KERN analytical balance directly via Metav Werkzeuge or consult our specialists for application advice. ALJ.160-4AM analytical balance by KERN — 160 g / 0.0001 g readability The ALJ.160-4AM is an analytical balance tailored for laboratory and quality-control tasks, offering sub-milligram resolution and automatic internal calibration for stable results. 160 g capacity with 0.0001 g readability Internal automatic calibration Stainless steel weighing pan Ø 80 mm Graphic LCD with 15 mm digits High-resolution measurement for reliable results The instrument delivers 0.0001 g readability, combined with 0.0001 g repeatability and ±0.0003 g linearity, which ensures that single measurements and series remain consistent under normal laboratory conditions. The balance uses a force compensation weighing system, a proven principle that converts load into a compensating electromagnetic force; this reduces mechanical hysteresis and supports precise readings across the full range. Such accuracy is essential for micro-dosing, analytical sample preparation and standards verification, where measurement precision directly influences experimental validity. Stable calibration and legal verification for quality assurance Equipped with internal automatic calibration, the balance maintains traceable accuracy without frequent manual adjustments, supporting uninterrupted workflows in controlled environments. It is built to Class I verification standards with a verification value 0.001 g, suitable for many analytical and research applications where documented calibration status is required. The instrument also reports minimal piece weights for counting tasks — 1 mg for laboratory counting and 10 mg for standard counting — enabling reliable component counting and process-control checks. Practical design that supports everyday laboratory use The balance combines a robust stainless steel pan (Ø 80 mm) with a plastic housing to balance durability and chemical resistance. The Graphic LCD with 15 mm digits improves readability for routine operations and reduces interpretation errors in dimly lit workspaces. With a compact footprint and a net weight of 6.5 kg, it fits benchtop workflows without sacrificing stability. Power is supplied via a plug-in adapter for AUS, CH, EU, UK and US sockets, simplifying international deployment and reducing downtime during installation. Suitable applications and trusted manufacturing With a 160 g capacity, the balance is optimised for analytical weighing in laboratories, quality-control departments and educational facilities that require sub-milligram precision. Manufactured by KERN in Italy, the instrument supports tasks from analytical chemistry and pharma compounding to R&D sample preparation. The compact construction and automatic internal adjustment contribute to fewer recalibrations and a steadier throughput, enhancing process efficiency and lowering the risk of rework. For laboratories seeking sub-milligram accuracy and reliable traceability, contact Metav Werkzeuge for application-specific guidance on the KERN ALJ.160-4AM and prompt supply from our Emmerich warehouse. Technical data SKU: ALJ.160-4AM Manufacturer: KERN Article number: TALJG-A GTIN: 4045761242913 Origin: IT Facts Maximum capacity: 160 g Readability: 0.0001 g Repeatability: 0.0001 g Linearity: ±0.0003 g Minimum weight: 0.01 g Verification value: 0.001 g Pan diameter: Ø 80 mm Instrument weight: 6.5 kg Dimensions: 210×340×330 mm Operating temperature: 5–35 °C Max ambient humidity: 80% Display digit height: 15 mm Special features Weighing system: Force compensation Internal automatic calibration Housing: Plastic; Weighing plate: Stainless steel Power supply: Plug-in adapter for AUS/CH/EU/UK/US Verification class: I Smallest piece weight counting (lab): 1 mg Smallest piece weight counting (normal): 10 mg FAQ What level of accuracy does this balance offer? The ALJ.160-4AM provides 0.0001 g readability with 0.0001 g repeatability and ±0.0003 g linearity, suitable for sub-milligram analytical work. Does the balance require external calibration weights? The KERN ALJ.160-4AM features internal automatic calibration, reducing the frequency of manual calibration with external weights while maintaining traceable accuracy. Is the instrument suitable for piece counting tasks? Yes — the balance supports piece counting with a smallest piece weight of 1 mg for laboratory counting and 10 mg for standard counting modes. Can the balance be used internationally without additional adapters? The balance is supplied with a plug-in adapter set for AUS, CH, EU, UK and US, facilitating international use. What environments is the balance designed for? The device operates reliably between 5–35 °C and up to 80% relative humidity; it is intended for laboratory and quality-control environments rather than uncontrolled field conditions. KERN — Origin: IT
210 g Analytical Balance Precision 0.0001 g Internal Calibration Glass Draftshield LCD 16 mm Display, Stainless Steel Pan 90 mm - KERN
Precision, internal calibration and a compact footprint combine to deliver dependable laboratory weighing at competitive cost; the automatic adjustment routine and fine readability support stable results across shifts — order the KERN ADJ 200-4 directly via Metav Werkzeuge or ask our consultants if needed. KERN ADJ 200-4 — analytical balance with 0.0001 g readability and internal automatic calibration The KERN ADJ 200-4 is an analytical balance engineered for laboratory, educational and quality-control environments, offering a stable weighing workflow thanks to automatic internal calibration and a glass draft shield with three sliding doors Readability 0.0001 g for fine measurements Internal automatic calibration for stability Glass draft shield with three sliding doors Stainless-steel pan and compact footprint Precision and reproducibility that support reliable decisions The KERN ADJ 200-4 delivers 0.0001 g readability and reproducibility 0.0002 g, characteristics that translate into measurable benefits for routine analysis: smaller samples can be quantified with confidence and batch-to-batch variation is easier to control. The internal automatic calibration, triggered after temperature shifts ≥ 2 °C and at three‑hour intervals, maintains measurement integrity without manual adjustment, reducing the need for frequent recalibration and helping to keep laboratory workflows consistent. Laboratory-friendly design for efficient handling and traceability A practical glass draft shield with three sliding doors allows safe access to samples while preventing air currents from affecting results. The instrument uses a force compensation weighing system with a stainless-steel pan (Ø 90 mm) and an easy-to-read LCD with 16 mm digit height, which together support clear, repeatable readings. Levelling is assisted by a built-in spirit level and adjustable feet, so the balance can be set up precisely and produce stable data from the first use. Integration, power and environmental resilience for everyday use The balance is supplied with plug-in adapters for EU/UK/US, accepting 100–265 V at 50–60 Hz, and is specified for operation between 10 °C–30 °C and up to 85% relative humidity. These parameters make the unit resilient across typical laboratory conditions and simplify deployment in education and quality-control labs. The construction — a plastic housing with a stainless-steel weighing plate — supports routine cleaning and helps to protect internal components, promoting long service life and predictable performance. Practical workflow benefits and regulatory considerations Operation via a straightforward 6‑key keypad shortens training time and reduces input errors, while the compact casing (230×310×330 mm) and 5 kg instrument weight help to conserve bench space. Notes on minimum sample mass reference USP guidance for applications that require documented minimum sample weights. Together, these design choices provide a balance between precision, ease of use and the procedural traceability needed in regulated or teaching environments. For dependable analytical weighing with automatic internal calibration, secure the KERN ADJ 200-4 through Metav Werkzeuge — available from our Emmerich warehouse; consult our specialists by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: ADJ.200-4 GTIN: 4045761214026 Manufacturer: KERN Product type: Analytical balance Country of origin: CN Core technical data Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ±0.0004 g Display digit height: 16 mm Weighing pan diameter: 90 mm Instrument weight: 5 kg Housing dimensions: 230×310×330 mm Operating temperature: 10 °C–30 °C Max ambient humidity: 85% Power input: 100–265 V; 50–60 Hz; 2.0 A Plug adapters included: EURO, UK, US Tariff code: 90160010 Special features Internal automatic calibration (time-controlled and temperature-dependent) Glass draft shield with three sliding doors Level bubble and adjustable feet for exact levelling 6-key user interface for simple operation Force compensation weighing system Stainless-steel weighing plate, plastic housing LCD display Suitable for education, laboratory and quality control USP minimum sample weight reference noted Supplied with plug-in power adapter FAQ How precise is the balance for analytical work? The KERN ADJ 200-4 provides 0.0001 g readability and reproducibility of 0.0002 g, suitable for fine analytical tasks and quality‑control sampling. Does the balance require manual calibration? Internal automatic calibration is performed at temperature shifts ≥ 2 °C and time-controlled every three hours, reducing the need for manual recalibration. Can the unit be used in teaching laboratories? Yes, the compact design, simple 6‑key operation and clear LCD display make the instrument well suited to educational settings and practical lab instruction. What power connections are supplied? The balance is supplied with adapters for EU, UK and US mains, accepting 100–265 V at 50–60 Hz for flexible installation. Is the draft shield easy to clean and access? The glass draft shield has three sliding doors for comfortable access to samples and straightforward cleaning routines. KERN — Address: not specified — Contact: not specified
210 g Precision Analytical Balance 0.00001 g Readability, Graphic LCD, Internal Calibration, 160×170×225 mm Draft Shield - KERN
Take advantage of the combination of exceptional resolution, robust internal calibration and an integrated ioniser to ensure fast, repeatable results in regulated environments; order the KERN ALJ 210-5A directly via Metav Werkzeuge or ask our consultants if needed. KERN ALJ 210-5A analytical balance — 210 g / 0.00001 g with built‑in ioniser The KERN ALJ 210-5A is a single‑range half‑micro analytical balance designed for pharmaceutical, research and quality‑control applications where high load capacity and ultra‑fine readability are required Single-range half‑micro accuracy 0.00001 g Built‑in ioniser for charge neutralisation Graphic LCD with multilingual guidance Internal automatic calibration for stability High‑resolution weighing for secure results The half‑micro model delivers a weighing range of 210 g with an outstanding readability of 0.00001 g, offering a balance between capacity and fineness that suits heavy micro‑samples. The force compensation weighing system minimises mechanical drift and, together with the instrument’s short settling characteristics, provides consistently reliable readings. Clear numerical values and a graphic LCD support fast interpretation of results while preserving traceability in routine laboratory workflows. Charge control and fast stabilisation accelerate workflows Electrostatic effects can distort measurements of small or lightweight samples; the integrated ioniser (KERN ALJ‑A03) neutralises surface charge, reducing weighing errors without extra accessories. Under stable laboratory conditions the instrument reaches stable values in around 10 s, which shortens cycle times for repetitive tasks and increases throughput. The combination of charge neutralisation and quick stabilisation improves both accuracy and efficiency during dosing and analytical procedures. Recipe memory and ergonomic layout reduce handling time A built‑in recipe memory stores full formulations with component names and target values, enabling guided portioning and faster batch preparation. The display‑assisted user guidance appears in multiple languages, allowing clear stepwise operation. The large glass draft shield with 3 sliding doors and an ergonomically optimised keypad (for left‑ and right‑handed users) simplifies access and manipulation of samples while reducing the risk of drafts and contamination during sensitive weighing tasks. Calibration, compliance and lab readiness An internal automatic calibration routine maintains measurement integrity independently of location, supporting consistent compliance across sites. Key performance indicators such as reproducibility 0.00005 g and linearity ±0.0001 g underpin the instrument’s suitability for demanding applications. The concept of minimum sample weight (USP) is relevant for ensuring reliable results at small quantities; this balance’s high resolution and stability characteristics make it a dependable choice for pharmaceutical and R&D environments where documented accuracy is required. Discuss application requirements with Metav Werkzeuge and secure tailored advice or documentation for the KERN ALJ 210-5A directly from our Emmerich team Technical data Article number: TALJG-A SKU: ALJ.210-5A GTIN: 4045761252882 Manufacturer: KERN Country of origin: CN Customs tariff heading: 90160010 eCl@ss: 32120101 Core specifications Weighing range: 210 g Readability: 0.00001 g Reproducibility: 0.00005 g Linearity: ± 0.0001 g Weighing pan diameter: 80 mm Weighing chamber (W×D×H): 160×170×225 mm Instrument dimensions (W×D×H): 210×340×330 mm Operating temperature: 5°C–35°C Max ambient humidity: 80% Net weight: 5.85 kg Power adapters included: AUS; CH; EURO; UK; US Features & applications Graphic LCD display with 15 mm digit height Integrated ioniser KERN ALJ‑A03 Internal automatic calibration Recipe memory for complete formulations Checkweighing with visual and audible signals High‑stability dosing modes and selectable filters Ergonomic keypad for left and right hand Large glass draft shield with three sliding doors Work protection cover included Minimum piece weight for counting: 1 mg (laboratory), 10 mg (normal) Suitable for pharmaceutical use, material testing, R&D, complex formulations Weighing system: force compensation FAQ What makes this balance suitable for pharmaceutical applications? The KERN ALJ 210-5A combines high resolution (0.00001 g), internal automatic calibration and recipe memory, meeting the precision and documentation needs typical in pharmaceutical workflows. How does the built‑in ioniser improve results? The integrated ioniser neutralises electrostatic charges on samples and containers; this reduces weighing errors for lightweight or insulating materials and enhances repeatability when using the KERN ALJ 210-5A. Is the balance stable enough for routine formulation work? Yes, the combination of force compensation technology, short stabilisation time and selectable high‑stability dosing modes ensures repeatable results for portioning and complex recipes. Can calibration be performed on site without specialist tools? The balance features an internal automatic calibration routine that performs adjustment independently of location, supporting consistent accuracy without external weight sets. Which languages are available on the display guidance? The graphic LCD of this analytical balance provides clear guidance in multiple languages, including English, French, Italian, Spanish, Portuguese and German. KERN — Sold by Metav Werkzeuge, Emmerich am Rhein. Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
220 g Analytical Balance Single-Cell 0.0001 g Readability, 91 mm Pan, LCD Display, Class I - KERN
Take advantage of KERN precision, the Single‑Cell weighing system and ultra‑fine readability to secure consistent analytical results in routine laboratory workflows; order directly via Metav Werkzeuge or ask our consultants if needed. KERN Analytical Balance ABJ.220-4NM – 220 g capacity, Single‑Cell weighing The Analytical Balance ABJ.220-4NM is a high‑precision laboratory instrument designed for analytical weighing tasks and piece counting in research, quality control and production settings. Single‑Cell weighing for stable results 220 g maximum capacity with 0.0001 g readability Reproducibility down to 0.0002 g Stainless steel pan, compact plastic housing Consistent, verifiable precision for analytical work The balance delivers laboratory‑grade accuracy with a 0.0001 g readability, a reproducibility of 0.0002 g and a linearity of ±0.0003 g, ensuring measurement results that withstand routine verification. The Single‑Cell weighing system minimises external influences such as air currents and mounting stresses, which translates into fewer retests and more predictable batch approvals. This level of performance supports traceable documentation of results and helps maintain process control in regulated environments. Faster sample handling and reliable piece counting With a 220 g capacity and a 91 mm diameter weighing pan, the instrument combines ample range with a practical sample area for common laboratory tasks. The balance permits piece counting down to 1 mg in laboratory mode and 10 mg in normal counting mode, making it suitable for small components, bulk sample checks and formulation tasks. The clear LCD with a 14 mm digit height improves read‑out speed; combined with the compact footprint, the unit supports efficient bench‑top workflows and reduces handling time per sample. Robust construction and straightforward integration The instrument features a stainless steel pan and a durable plastic housing, balanced for a low overall weight of 6.35 kg and bench compatibility within its dimensions of 214 × 340 × 330 mm. It operates reliably between 10 °C–30 °C and in relative humidity up to 85%, while the external plug‑in power supply accepts 110 V–230 V AC and includes adapters for AUS, CH, EURO, UK and US plugs for immediate international deployment. The device’s construction and calibration class I status support long‑term stability and predictable maintenance intervals, reducing downtime and administrative overhead. Contact Metav Werkzeuge for tailored advice on KERN analytical balances such as the ABJ.220-4NM and to request detailed technical documentation or a personalised quotation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer: KERN Model / SKU: ABJ.220-4NM GTIN: 4045761145337 Commodity code: 90160010 eClass: 32120101 Calibration class: I Country of origin: PH Core specifications Maximum capacity: 220 g Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ±0.0003 g Weighing pan diameter: 91 mm Display digit height: 14 mm Display type: LCD Operating temperature: 10 °C–30 °C Max. ambient humidity: 85% Net weight: 6.35 kg Housing dimensions (W×D×H): 214 × 340 × 330 mm Power input: 110 V–230 V AC Power supply: Plug‑in adapter (AUS; CH; EURO; UK; US) Materials & special features Weighing system: Single‑Cell Housing material: Plastic Weighing plate: Stainless steel Piece counting: 1 mg (laboratory mode), 10 mg (normal mode) Reproducible results for routine QC and research International plug adapters included FAQ How precise is the balance for routine analytical tasks? The KERN Analytical Balance ABJ.220-4NM offers 0.0001 g readability, a reproducibility of 0.0002 g and linearity of ±0.0003 g, delivering the precision expected in analytical laboratories. Is the instrument suitable for piece counting of small components? Yes. In laboratory counting mode the ABJ.220-4NM supports piece counting down to 1 mg, while the normal counting mode covers down to 10 mg, making it suitable for small‑part inventories and sampling. What are the environmental requirements for accurate operation? Optimal operation lies between 10 °C and 30 °C with relative humidity up to 85%. Stable environmental conditions improve repeatability and reduce drift for the ABJ.220-4NM. Which power options are available for international use? The unit uses a plug‑in power supply compatible with 110 V–230 V AC and is supplied with adapters for AUS, CH, EURO, UK and US plugs for immediate global deployment. How large is the weighing surface and how does it affect sample handling? The stainless steel pan measures 91 mm in diameter, providing a practical working area for typical lab samples and facilitating faster placement and retrieval during routine analyses. KERN — Manufacturer Address: not specified Contact: not specified
220 g Precision Analytical Balance Single-Cell Weighing System 0.0001 g Readability, CAL/Recipe/Shield - KERN
Take advantage of precise weighing, integrated data output and a robust single-cell design to secure consistent results and streamlined documentation in routine laboratory workflows — order the KERN ACS 200-4 via Metav Werkzeuge or consult our specialists for tailored advice. KERN ACS 200-4 — analytical balance with 0.0001 g readability and single-cell weighing system The KERN ACS 200-4 is an analytical balance designed for laboratory use, offering a 220 g capacity and ultra-fine 0.0001 g resolution for accurate sample preparation and formulation. High precision 0.0001 g readability Single-cell weighing system for stability CAL adjustment programme included Combined tare and print for recipe logging Draft shield and automatic data output Consistent, traceable precision for demanding workflows The instrument delivers 0.0001 g readability with reproducibility of 0.0002 g and linearity ±0.0003 g, values that minimise measurement uncertainty in critical tasks. The single-cell weighing system improves stability and reduces sensitivity to external influences, making it suitable for analytical tasks in pharmacies, food analysis and R&D. The included draft shield protects the weighing process, while the programmable four-digit identification number supports traceable calibration records—features that together reduce rework and increase lab throughput. Faster documentation and fewer transcription errors Integrated functions focus on efficient data handling: automatic data output to PC or printer after each stable reading, a combined tare and print function that numbers and records recipe components automatically, and a selectable high-stability mode with filters for smoother results during dosing. The balance supports streamlined workflows for formulations and quality control, reducing manual entry and helping to maintain audit-ready logs. The built-in CAL adjustment programme allows routine accuracy checks without complex procedures. Durable design adapted to everyday laboratory conditions Constructed with a stainless steel weighing plate and a plastic housing, the unit balances robustness with ease of cleaning. The 91 mm weighing surface and a compact footprint (210 × 340 × 330 mm) make the device adaptable to bench-mounted use; total weight is 5.8 kg. Power is supplied via a plug-in adapter with CH, EURO, UK and US plugs included, and the permitted ambient range of 10°C–30°C at max 85% humidity suits many controlled environments. The US Minimum Sample Weight (MSW) is provided as a guide to the smallest reliable sample for a specified uncertainty, helping users choose appropriate sample sizes for compliant results. For precise laboratory weighing from KERN and reliable supply from Metav Werkzeuge, contact our Emmerich team for product selection, calibration options and delivery coordination — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ACS.200-4 Manufacturer: KERN GTIN: 4045761235700 SKU: ACS.200-4 Tariff number: 90160010 Facts Weighing range: 220 g Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ±0.0003 g Pan diameter: 91 mm Weight: 5.8 kg Operating temperature: 10°C–30°C Max ambient humidity: 85% Display digit height: 14 mm Power input: 110 V–230 V AC Weighing system: Single-cell Special features CAL adjustment programme External test weights available (extra cost) High-stability mode and selectable filters Combined tare and print for recipe numbering Automatic data output to PC/printer after stabilisation Programmable 4-digit balance ID (printed on calibration protocol) Draft shield included Housing: plastic; weighing plate: stainless steel Power supply adapters: CH, EURO, UK, US FAQ How accurate is the balance for analytical work? The KERN ACS 200-4 achieves a readability of 0.0001 g with reproducibility of 0.0002 g and linearity of ±0.0003 g, making it suitable for precise analytical and formulation tasks. Can measurement data be exported automatically? Yes. The instrument provides automatic data output to a PC or printer after each stable reading, enabling direct documentation and integration into laboratory records. Is routine calibration supported? A CAL adjustment programme is integrated for routine accuracy checks; the balance also accepts external test weights (available at additional cost) for formal verification. Which laboratory applications suit this balance? Typical applications include pharmacy compounding, food analysis, environmental testing, chemical industry checks and research and development where high-resolution weighing and reliable documentation are required. Manufacturer: KERN — Address: not specified — Contact: not specified
220 g Precision Analytical Balance Single-Cell, Readability 0.0001 g, Stainless Steel Pan 91 mm, LCD - KERN
Combine high-resolution measurement with a compact footprint and robust Single-Cell stability for dependable laboratory weighing; benefit from precise readability and consistent reproducibility when integrating this instrument into quality workflows. Order the KERN analytical balance directly via Metav Werkzeuge or consult our specialists for technical guidance. KERN ABS.220-4N Analytical Balance — Single-Cell system, 220 g capacity / 0.0001 g readability The KERN ABS.220-4N is an analytical balance designed for precise laboratory weighing, offering high resolution and a Single-Cell weighing system for stable results in routine and research settings. High resolution: 0.0001 g readable Single-Cell weighing system for stability Stainless steel pan Ø 91 mm Compact housing 210×340×325 mm Consistent, traceable mass readings for quality control The KERN ABS.220-4N delivers readability 0.0001 g and reproducibility 0.0002 g, providing the fine resolution needed for analytical tasks and tight process tolerances. Its linearity ±0.0003 g ensures that measurements remain accurate across the usable range, which supports traceable documentation and repeatable test results. These numerical characteristics reduce uncertainty in routine checks and experimental workflows, helping to improve decision-making in quality control and formulation tasks. Stable performance in a space-saving design Equipped with a Single-Cell system, the instrument minimises external influences such as vibration and draft, yielding faster settling times and steadier readouts. The stainless steel pan Ø 91 mm and compact housing 210×340×325 mm make the balance suitable for constrained bench spaces without sacrificing capacity. At a weight of 6 kg, the device is portable enough for flexible use across lab benches while maintaining the mechanical stability expected in precision weighing. Clear display and operational reliability for everyday use An LCD display with 14 mm digit height provides legible readings that reduce interpretation errors during sample processing. The balance accepts 110–230 V AC input and is supplied with international adapters (CH; EURO; UK; US), enabling straightforward integration into multinational laboratories. Operating conditions are specified as 10–30 °C and up to 85% relative humidity, which helps users plan environmental control to safeguard measurement accuracy. Designed for laboratory workflows and versatile tasks With a maximum capacity of 220 g, the balance covers a broad range of analytical applications; piece-counting capability is supported with minimum piece weights of 1 mg in laboratory mode and 10 mg in standard mode, assisting inventory checks and small-part analysis. The housing combines plastic construction with an stainless steel weighing plate, balancing durability and ease of cleaning. Built for consistent day-to-day performance, the instrument supports streamlined procedures and fewer measurement retries, contributing to more efficient laboratory throughput. For precision weighing needs, select the KERN ABS.220-4N and contact Metav Werkzeuge in Emmerich for personalised technical advice and reliable supply: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: ABS_N SKU: ABS.220-4N GTIN: 4045761145375 Manufacturer: KERN Tariff code: 90160010 Facts Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ±0.0003 g Capacity: 220 g Weighing pan diameter: 91 mm Display digit height: 14 mm Operating temperature: 10–30 °C Max. ambient humidity: 85% Weight: 6 kg Weighing system: Single-Cell Special features Housing: plastic; weighing plate: stainless steel Display type: LCD Power supply: plug-in power supply (Steckernetzteil) Power input range: 110 V - 230 V AC Included adapters: CH; EURO; UK; US Origin: PH Category: Laboratory balances Minimum piece weight (laboratory): 1 mg Minimum piece weight (standard): 10 mg FAQ What is the smallest mass that can be read reliably? The KERN ABS.220-4N provides a readability of 0.0001 g, with reproducibility specified at 0.0002 g for reliable small-mass determination. Is the balance stable against external disturbances? The Single-Cell weighing system in this analytical balance reduces susceptibility to drafts and vibration, improving settling time and stability for routine measurements. Can this balance be used for piece counting and small parts? Yes. The instrument supports piece counting with a minimum piece weight of 1 mg in laboratory mode and 10 mg in standard counting mode. Which power supply options are included for international use? The KERN analytical balance is supplied with a plug-in power supply and adapters for CH, EURO, UK and US outlets; input range is 110–230 V AC. How large is the weighing surface and is it easy to integrate on a bench? The stainless steel pan has a diameter of 91 mm and the compact housing measures 210×340×325 mm, offering a small footprint for bench integration. Manufacturer: KERN · Merchant: Metav Werkzeuge, Emmerich am Rhein · info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271
220g Analytical Balance Single-Cell Weighing System 0.0001g Readability, Internal Calibration, Stainless Steel Pan - KERN
Take advantage of high-precision weighing with a Single-Cell system and internal automatic adjustment to maintain reproducible results and reduce calibration downtime; order the balance directly via Metav Werkzeuge or consult our specialists for tailored advice. ABT.220-4NM Analytical balance with Single-Cell system and internal adjustment — KERN The ABT.220-4NM is an analytical balance designed for precise laboratory weighing, combining a Single-Cell weighing system with automatic internal adjustment for stable, regulatory-compliant measurements Analytical balance with Single-Cell system Readability 0.0001 g for fine results Internal automatic adjustment Stainless steel pan Ø80 mm Consistent, verifiable weighing for regulated workflows The analytical instrument delivers readability 0.0001 g and a reproducibility of 0.0001 g, providing measurement stability that supports traceable processes. With a maximum capacity of 220 g and a minimum weight 0.01 g, the device fulfils tasks from microdispensing checks to routine analysis. Linearity of ±0.0002 g and verification values of 0.001 g mean results are easier to document for audits and quality management. These numerical specifications translate into fewer retests and clearer conformity to laboratory standards. Reduced maintenance and predictable uptime through built-in calibration Equipped with internal automatic adjustment, the balance compensates for short-term environmental shifts without manual intervention. The Single-Cell weighing system concentrates the weighing function into a single high-performance cell, improving signal stability and reducing sensitivity to draft and vibrations compared with multi-cell designs. An easy-to-read LCD with 14 mm digit height and included plug-in mains adapters (CH; EURO; UK; US) ensure rapid installation. Together, these features lower routine maintenance and minimise interruptions to production or testing schedules. Compact footprint and robust construction for everyday laboratory use A stainless steel weighing pan with a diameter of 80 mm sits within a durable housing measuring 217 × 345 × 330 mm, weighing 7.65 kg, which makes the unit suitable for benchtop use without occupying excessive space. The appliance operates reliably between 10 °C and 30 °C and tolerates relative humidity up to 80%, supporting typical laboratory environments. The balance’s design balances portability with stability, enabling precise weighing in tight workspaces while maintaining professional durability. For precision-oriented laboratories choose the KERN ABT.220-4NM for dependable analytical weighing — contact Metav Werkzeuge in Emmerich for specialist advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ABT.220-4NM Manufacturer: KERN SKU: ABT.220-4NM GTIN: 4045761185548 Facts Maximum capacity: 220 g Readability: 0.0001 g Reproducibility: 0.0001 g Linearity: ±0.0002 g Minimum weight: 0.01 g Verification value: 0.001 g Weighing pan diameter: 80 mm Display digit height: 14 mm Dimensions (W×D×H): 217 × 345 × 330 mm Weight: 7.65 kg Operating temperature: 10 °C–30 °C Max relative humidity: 80% Power input: 220 V–240 V AC, 50 Hz Special features Single-Cell weighing system Internal automatic adjustment Stainless steel weighing pan LCD display Verification class I Plug-in mains adapters included (CH; EURO; UK; US) Housing origin: PH Commodity code: 90160010 FAQ What accuracy can be expected for routine measurements? The balance provides a readability of 0.0001 g and reproducibility of 0.0001 g, so the ABT.220-4NM from KERN is suited to applications requiring fine, repeatable results. Is internal calibration automatic and suitable for frequent use? Yes, the internal automatic adjustment allows the analytical balance to compensate for small environmental changes regularly, reducing the need for manual calibration. Which materials can be placed on the weighing pan? The device uses a stainless steel pan Ø80 mm, compatible with common laboratory samples and easy to clean without affecting measurement integrity. Can the balance be used in standard laboratory rooms? Operation between 10 °C and 30 °C and up to 80% relative humidity makes the unit appropriate for most standard lab environments without special climate control. Does the instrument include power adapters for different countries? The ABT.220-4NM is supplied with plug-in mains adapters for CH, EURO, UK and US connections, facilitating straightforward installation in international facilities. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — Tel. +49 2822 7131930 — WhatsApp +49 170 2837271
220g Analytical Balance Single-Cell Weighing System 0.0001g Readability, IP Not Specified - KERN
Take advantage of high-resolution weighing, a robust Single-Cell system and automated calibration routines to secure consistent results and efficient documentation for laboratory workflows. Order the balance directly via Metav Werkzeuge or consult our specialists for tailored configuration and calibration advice. KERN ACJ 200-4M Analytical Balance — 220 g capacity, 0.0001 g readability The KERN ACJ 200-4M is an analytical balance engineered for precise micro-weighing in laboratories, pharmacies and quality-control environments. Bestseller with Single-Cell weighing system Readability 0.0001 g for micro-precision Internal auto-calibration with temperature compensation Draft shield and dosing aid supplied as standard Precise results through proven weighing technology The instrument employs a Single-Cell weighing system, which centralises the load detection into one high-performance sensor to reduce eccentricity errors and improve repeatability. With a readability of 0.0001 g and a reproducibility of 0.0002 g, this analytical instrument delivers the tight tolerances required for trace analysis and formulation work. The stainless-steel pan and robust housing support stable measurement conditions while the compact footprint minimises bench-space use. Technical terms such as linearity and reproducibility are translated into practical benefit here: tighter linearity (±0.0003 g) means fewer correction steps during routine weighing and more reliable mass values for downstream calculations. Consistent accuracy with automated calibration and stability filters Accuracy is maintained by an internal automatic calibration that activates after temperature shifts of ≥ 2 °C and can be time-scheduled every four hours, ensuring that measurement drift is addressed without manual intervention. The balance offers selectable stability filters and a high-stability dosing mode, which stabilise readings when handling volatile samples or when ambient conditions vary. These functions reduce rework and improve throughput, particularly in environments where environmental control is limited. Automatic data output to PC or printer after each stable reading streamlines documentation and supports traceable record‑keeping. Workflow advantages: dosing, documentation and identification The integrated dosing aid and combined tara/print function simplify recipe preparation by automatically numbering constituents and printing each component alongside its mass, which is especially useful for formulation labs and compounding pharmacies. The balance includes a programmable four‑digit identification number that is printed in the calibration protocol for audit trails. Data connectivity and automatic output minimise transcription errors and accelerate sample processing, making the instrument a practical choice where reproducible procedures and digital records are required. Built for routine laboratory use and regulatory compliance Designed to meet the needs of routine analytical tasks, the unit is verification class I with verification values of 0.001 g and is supplied with a protective work cover. The combination of a clear LCD display with 14 mm digit height and multiple mains adapter types (CH, EURO, UK, US) supports flexible deployment across international labs. The balance’s performance characteristics, including a minimum sample weight and specific counting capabilities, make it suitable for pharmaceutical, environmental and food‑analysis applications where documented precision is mandatory. Choose the KERN ACJ 200-4M through Metav Werkzeuge for assured measurement quality and logistics from Emmerich; contact our consultants to discuss configuration options, calibration requirements and fast delivery arrangements Technical data Article number: TACJ-A SKU: ACJ.200-4M GTIN: 4045761235656 Manufacturer: KERN Origin: PH eClass: 32120101 Commodity code: 90160010 Facts Weighing range: 220 g Readability: 0.0001 g Reproducibility: 0.0002 g Linearity: ± 0.0003 g Verification values: 0.001 g Minimum weight: 0.01 g Smallest piece weight (counting, lab): 1 mg Smallest piece weight (counting, normal): 10 mg Weighing pan diameter: 91 mm Display digit height: 14 mm Operating temperature: 10–30 °C Max. ambient humidity: 85% Power input: 110 V–230 V AC Power supply included: CH; EURO; UK; US Weight: 6.35 kg Special features Single-Cell weighing system Internal automatic calibration (temperature-triggered and timed) Dosing aid with high-stability mode and selectable filters Combined tara/print function; automatic numbering of recipe components Automatic data output to PC/printer after each stable reading Programmable four-digit scale ID printed in calibration protocol Housing: plastic; weighing pan: stainless steel Protective work cover included Suitable for pharmacies, food analysis, environmental labs, chemistry, R&D FAQ What level of accuracy does the balance provide? The KERN ACJ 200-4M offers a readability of 0.0001 g with reproducibility of 0.0002 g, suitable for high-precision analytical tasks. How does the internal calibration work? Internal automatic calibration on the ACJ 200-4M triggers after temperature changes ≥ 2 °C and can be scheduled at regular intervals to maintain consistent accuracy. Can the balance output measurement data to a PC or printer? Yes, the analytical balance provides automatic data output to PC or printer immediately after each stable reading to support documentation and traceability. What features support recipe preparation and dosing? The instrument includes a dosing aid, a high‑stability mode and a combined tara/print function that numbers and prints each recipe component with its recorded weight. Is the weighing pan material suitable for routine laboratory use? The device has a stainless-steel pan, offering chemical resistance and ease of cleaning for standard laboratory applications. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271
220g Precision Analytic Balance 0.00001g Readability, Internal Calibration, Single-Cell System, 91mm Pan Ø - KERN
Combine ultra‑fine 0.00001 g readability with the Single Cell weighing system and internal calibration for rapid, stable results. Order the (KERN ABP 200-5M) directly via (Metav Werkzeuge) or ask our consultants if needed. KERN ABP 200-5M — Analytical balance with Single Cell technology and 220 g range The ABP 200-5M is a premium semi‑micro analytical balance designed for laboratories and production control, offering high resolution and fast stabilisation for demanding dosing and QC tasks. Ultra-fine readability 0.00001 g Single‑Cell system for fast stabilisation Internal adjustment automatics for stability Large glass draft shield with 3 sliding doors Precision where accuracy shortens process time This semi‑micro analytical instrument delivers readability of 0.00001 g and a weighing span up to 220 g, combining a broad working range with exceptional resolution. The Single Cell load cell reduces mechanical complexity and improves signal processing, which means readings settle faster than many conventional systems. For users who require reproducible microgram results, the instrument’s reproducibility figures (e.g. 0.000015 g; 0.00003 g; 0.00005 g) and linearity ±0.0002 g give a clear, verifiable basis for quality control and documentation. The practical effect is shorter cycle times and fewer repeat measurements. Faster results and controlled dosing for efficient workflows A key operational benefit is the combination of rapid stabilisation and targeted dosing support. The balance offers selectable high‑stability modes and adjustable filters to improve performance when dispensing small volumes or weighing unstable samples. The device also includes a multifunction weighing plate that minimises air flow influence within the weighing chamber, reducing settling time and improving repeatability when handling vials, microtubes or sample papers. This translates into time saved per measurement and greater throughput for routine analyses. Traceable data handling and secure user management The unit supports RS‑232 and USB (Device/Host) for direct transfer of weigh data and connection of a USB keyboard, which simplifies entry of article numbers and recipe components. Built‑in support for U.S. FDA 21 CFR Part 11 elements assists data integrity workflows by recording weigh results, sample IDs and user data. Up to 10 user profiles can be defined with individual permissions, passwords and printable user IDs, enabling secure operation in regulated environments. Combined tare/print functions and automatic numbering of recipe components streamline documentation during formulation or QC processes. Designed for laboratory conditions and ease of use The instrument features an OLED display with 12 mm digit height for clear readback and a large glass draft shield with three sliding doors for convenient access to samples. Internal adjustment is triggered automatically with temperature changes ≥1 °C and also time‑controlled every four hours, ensuring consistent accuracy independent of placement. The included accessories—an Erlenmeyer flask holder, protective hood and the multifunction weighing plate—support a range of typical lab tasks from formulation to gravimetric analysis. Environmental tolerances (10°C–30°C, up to 80% relative humidity) and universal adapters for AUS, CH, EURO, UK and US sockets are integrated to suit diverse lab set‑ups. Contact Metav Werkzeuge for expert advice on the KERN ABP 200-5M analytical balance and secure reliable supply from Emmerich Technical data Article number: TABP-A SKU: ABP.200-5M GTIN: 4045761250307 Manufacturer: KERN Country of origin: PH Core figures Weighing range: 220 g Readability (d): 0.00001 g Minimum weight: 0.001 g Pan diameter (d): 91 mm Weight: 7.9 kg Display digit height: 12 mm Operating temperature: 10°C–30°C Maximum ambient humidity: 80% Power supply: 220 V–240 V AC, 50 Hz Reproducibility: 0.000015 g; 0.00003 g; 0.00005 g Linearity: ± 0.0002 g Legal for trade class: I Tariff number: 90160010 Features & options Single Cell weighing system OLED display Internal adjustment automatics (temperature/time) Multifunction weighing plate included Erlenmeyer flask holder included Protective work cover included Glass draft shield with 3 sliding doors RS‑232 and USB (Device/Host) interfaces U.S. FDA 21 CFR Part 11 support Up to 10 individual user profiles Automatic data output after each stabilisation Universal country adapters: AUS; CH; EURO; UK; US FAQ What is the smallest increment the balance can reliably display? The KERN ABP 200-5M provides a readability of 0.00001 g, enabling microgram‑level resolution suitable for precise analytical tasks. Can the balance be used for regulated environments with traceability requirements? Yes. The analytical balance from KERN supports features aligned with U.S. FDA 21 CFR Part 11 and offers automatic data output, user IDs and secure logging to assist traceable workflows. Is an internal calibration function provided to maintain accuracy? An internal adjustment automatics system is integrated; calibration is triggered at temperature changes ≥1 °C and can also run every four hours to maintain weighing stability. Which interfaces are available for data transfer? The unit includes RS‑232 and USB (Device/Host) interfaces for direct data transfer to PCs and printers, and for connection of a USB keyboard to ease data entry. What accessories are included with the balance? Included items are a multifunction weighing plate, an Erlenmeyer flask holder and a protective hood to support common laboratory procedures. Manufacturer: KERN — Origin: Philippines; Seller contact: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930
220g Precision Analytical Balance 0.0001g Readability With Internal Calibration, RS‑232/USB - KERN
Take advantage of high-speed single‑cell weighing, ultra‑fine readability and built‑in automatic calibration to keep laboratory throughput steady and results traceable. Order the balance directly via Metav Werkzeuge or consult our specialists for configuration and compliance advice. KERN ABP 200-4M analytical balance — 220 g range, 0.0001 g readability The KERN ABP 200-4M is an analytical balance optimised for pharmaceutical, R&D and quality‑control tasks, combining a wide weighing range with microgram resolution and rapid stabilisation for efficient laboratory workflows. KERN Single‑Cell generation for fast stability Readability 0.0001 g for ultra‑fine results Internal automatic calibration for accuracy Large glass draft shield with 3 sliding doors RS‑232 and USB interfaces for data export Faster, more stable weighing for busy laboratories The new Single‑Cell Generation significantly reduces settling time, delivering stable readings in a fraction of the time required by comparable models. With a weighing capacity of 220 g and a readability of 0.0001 g, the instrument supports both routine sample checks and high‑precision tasks. The combination of fast stabilisation and a multifunction weighing plate reduces the influence of air currents and improves repeatability, enabling quicker decision cycles in production control and research environments. Traceable accuracy and compliant data handling Built‑in internal automatic calibration activates on temperature shifts ≥ 1 °C and at four‑hour intervals, preserving measurement accuracy across changing laboratory conditions. The balance supports data integrity in line with U.S. FDA 21 Part 11 (for example: result, sample ID, username, scale ID) and offers user accounts and permissions for up to ten profiles, including guest mode and barcode‑triggered login. Networked data transfer is possible via RS‑232 and USB (Device and Host), enabling secure logging and automated export of results after each stable reading. Simplified operation that keeps processes consistent An intuitive menu with a navigation cross, a clear OLED display with 12 mm digits and a large glass draft shield with three sliding doors improve ergonomics and reduce handling time. The dose‑assisting filters and a high‑stability mode support precise dispensing, while combined tara/print functions and automatic numbering of recipe components simplify documentation. For piece counting the balance achieves 1 mg as the smallest piece weight in laboratory mode and 10 mg in normal mode, allowing flexible use across tasks without compromising accuracy. Designed for regulated sectors and varied applications The instrument’s specifications — reproducibility 0.0001 g, linearity ±0.0002 g and a minimum recommended sample weight of 0.01 g — make it suitable for pharmaceutical applications, quality control, research and production. A stainless‑steel weighing pan of 91 mm diameter and a comprehensive accessory set (multifunction weighing plate, protective hood) support diverse sample types including small vessels and microtubes. The compact footprint (220 x 370 x 350 mm) and a net weight of 7.03 kg help integrate the balance into existing laboratory benches without extensive reorganisation. Contact Metav Werkzeuge today to discuss which configuration of the KERN ABP 200-4M best fits process requirements and regulatory needs — Tel +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: TABP-A SKU: ABP.200-4M GTIN: 4045761213913 Manufacturer: KERN Country of origin: PH Commodity code: 90160010 Facts Weighing range max: 220 g Readability (d): 0.0001 g Reproducibility: 0.0001 g Linearity: ± 0.0002 g Minimum weight (recommended): 0.01 g Pan diameter (d): 91 mm Display digit height: 12 mm Operating temperature: 10 °C–30 °C Max ambient humidity: 80% Weight: 7.03 kg Power input: 220 V–240 V AC, 50 Hz Special features Weighing system: Single Cell Display type: OLED Weighing pan material: stainless steel Internal automatic calibration Glass draft shield with 3 sliding doors Multifunction weighing plate included Interfaces: RS‑232, USB (Device), USB (Host) Menu languages: DE, EN Supports U.S. FDA 21 Part 11 User management for up to 10 users Includes plug‑in power adaptors CH, EURO, UK, US FAQ What is the smallest sample the balance can reliably measure? The KERN ABP 200-4M has a recommended minimum sample weight of 0.01 g; for precise piece counting the balance supports 1 mg (laboratory mode) and 10 mg (normal mode). Does the balance support regulatory data integrity requirements? Yes, the ABP 200-4M supports data integrity in line with U.S. FDA 21 Part 11, enabling secure recording of results, sample IDs and user information. How are results exported from the balance? Results can be exported automatically after each stable reading via RS‑232 or USB (Device); a USB Host port allows connection of a keyboard for easier entry and navigation. Is automatic calibration available and when does it trigger? The balance features an internal automatic calibration that activates when ambient temperature changes by ≥ 1 °C and is also time‑controlled at four‑hour intervals to maintain accuracy. Which sectors are best suited for this analytical balance? The instrument is particularly suitable for pharmaceutical applications, quality control, research and development, and chemical or production environments requiring microgram resolution. Metav Werkzeuge, Emmerich am Rhein | info@metav-werkzeuge.com | +49 2822 7131930
High-precision weighing for lab and pharma workflows
Analytical balances — also commonly called analysis balances or precision balances — are engineered for weighing minute samples in the submilligram range. Typical models offer readability up to 0.01 mg, making them suitable for chemical analysis, pharmaceutical formulation and stringent quality assurance tasks where trace accuracy matters.
How better measurement speeds up your processes
These lab balances deliver reproducible results through features that streamline routine workflows. Built-in functions such as internal calibration ensure consistent performance over time; high measurement stability reduces settling time between readings; and modern interfaces for data transfer integrate weighing results directly into laboratory information management systems, cutting manual transcription and error.
Clear advantages on the shop floor and in the lab
- faster decision-making thanks to 0.01 mg readability and rapid stabilization
- lower rework and fewer repeats through high measurement stability
- simplified traceability via digital data output and interface compatibility
- consistent performance ensured by automatic internal calibration
- flexible use across analytical, pharmaceutical and qa applications
Why Metav is the pragmatic choice for analytical balances
Metav stands for the democratisation of precision, offering accessible, dependable measuring technology for workshops and laboratories alike. From Emmerich, Metav operates as a quality filter for the european market, combining decades of metrology expertise with a broad range of products. With more than 48,000 customers and an assortment exceeding 250,000 products, Metav reduces supplier complexity while guaranteeing reliable supply and accountable order handling.
Technical data
- application: submilligram weighing of very small samples
- readability: up to 0.01 mg
- typical uses: chemical analysis; pharmaceutical applications; quality assurance
- features: internal calibration; high measurement stability; modern interfaces for data transfer
FAQ
What makes analytical balances different from standard precision balances?
Analytical balances provide finer readability and stability for submilligram samples; these analytical balances are optimised for laboratory conditions where 0.01 mg resolution and controlled environmental performance are required.
Can I connect the balance to my lab software?
Yes. Many analytical balances include modern interfaces for data transfer that allow direct integration with laboratory information systems and electronic recordkeeping.
How does internal calibration benefit routine analyses?
Internal calibration keeps the balance within specification without manual weights, improving day-to-day accuracy and reducing downtime for adjustments.
Are analytical balances suitable for pharmaceutical quality assurance?
Absolutely. Analytical balances are designed to meet the traceability and reproducibility demands of pharmaceutical testing and quality assurance workflows.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com