Tailored accessories that enhance scale performance and safety
Accessories for scales extend a standard weighing system into a bespoke solution, providing mechanical aids for easy loading and vibration-free support as well as electronic modules for reliable data capture and connectivity. Designed for industrial and laboratory environments, these add-ons—such as weighing pans, platform ramps and antivibration plates—improve ergonomics and protect sensitive components, while Bluetooth modules and printers ensure traceable, automated documentation. By combining hanging fixtures like hooks and shackles with power options such as rechargeable batteries, operators gain both flexibility and continuity of operation.
1.5m RS-232 Interface Cable For Floor And Pallet Scales, Non-Retrofit - KERN
Combine compact RS‑232 connectivity, an included 1.5 m interface cable and direct compatibility with KERN floor, platform and pallet scales for reliable data transfer; order the interface directly via Metav Werkzeuge or consult our specialists for configuration advice. KFN-A01 RS-232 data interface – KERN, for floor and pallet scales, includes 1.5 m cable The KFN-A01 RS-232 data interface delivers dependable serial communication for KERN floor scales, stainless-steel platform scales and pallet scales, enabling straightforward transfer of weighing data to terminals or PCs. RS-232 serial interface with cable 1.5 m interface cable supplied Compatible with KERN BFN, SFB and UFN Streamlined data capture for process control The RS‑232 standard remains a robust choice for industrial weighing applications thanks to its simple, well-documented wiring and broad device support. By offering a dedicated serial connection the interface secures fast data capture from scales into data loggers, label printers or legacy terminals without intermediary conversion. For production environments this means fewer protocol issues, reduced integration time and a predictable data flow from the weighing point to backend systems. The clear, unambiguous signal format reduces the need for repeat readings and supports traceable record keeping. Fast installation and assured compatibility The KFN‑A01 arrives with a 1.5 m interface cable ready for immediate connection, minimising setup time on the workshop floor. Intended for KERN models such as BFN (floor scales), SFB (stainless-steel platform) and UFN (pallet scales), the module is supplied as a factory-fit option and is not retrofittable, so planning for initial integration is advised. The compact module and supplied lead support neat cable routing and straightforward mounting, helping to avoid common installation delays and maintain the uptime of weighing processes. Reliable workflow and supply assurance Compact in design and light in weight, the interface contributes to a tidy installation that integrates with production routines and measurement systems. Choosing accessories from established brands and a trusted distributor reduces procurement risk: Metav combines decades of precision expertise with central supply from Emmerich, a broad product range and consistent stock handling. This supplier reliability supports uninterrupted operations and aligns with quality-driven purchasing policies in industry and trade. For fast supply and expert advice on the KFN-A01 RS-232 data interface, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: KFN-A01 Manufacturer: KERN SKU: KFN Facts Weight: 0.15 kg Cable length: 1.5 m Special features Interface: RS-232 Compatible with: KERN BFN, KERN SFB, KERN UFN Not retrofittable Supplied: interface cable 1.5 m FAQ What types of scales is the interface compatible with? The KFN-A01 RS-232 data interface is compatible with KERN floor scales (BFN), stainless-steel platform scales (SFB) and pallet scales (UFN). Is the interface supplied with a cable? Yes, the product is supplied with an included interface cable of 1.5 m length for immediate connection. Can the RS‑232 interface be retrofitted to existing scales? The interface is specified as not retrofittable; it is intended for original-fit installation on the compatible KERN models. Which data destinations can receive signals from this interface? The RS‑232 output is suited to PCs, terminals, label printers and data loggers that accept serial input in standard ASCII or configured protocols. How heavy is the module and how does that affect installation? The module has a weight of 0.15 kg, allowing discreet mounting with minimal impact on scale handling and cabling. Manufacturer: KERN · Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930
1.5m RS-232 Interface Cable For KERN ABJ/ABS/ABT/PBS/PBJ Scales - KERN
Combine reliable RS-232 connectivity, a practical 1.5 m cable length and direct compatibility with multiple KERN balance models for uninterrupted data capture; order via Metav Werkzeuge or consult our experts for seamless integration. Interface cable 770-926 – RS-232 connection cable, 1.5 m (KERN) The Interface cable 770-926 is an RS-232 lead for connecting KERN scales and balances to external devices, enabling straightforward serial data transfer in laboratory and workshop environments RS-232 interface for reliable data transfer Cable length approx. 1.5 m for flexible routing Compatible with KERN ABJ, ABS, ABT, PBS, PBJ Dependable serial communication for measurement data The RS-232 standard is a widely used method for serial communication between weighing instruments and peripheral systems; this interface cable supports stable signal transmission for recorded values and control commands. By providing a standardised physical connection to external devices such as data loggers, printers or PCs, the cable minimises interruptions in automated workflows and supports traceable data handling, which is essential in quality assurance and process documentation. Practical length and lightweight design for workshop use A cable length of approx. 1.5 m offers a useful balance between reach and neat routing on workbenches or in small measurement stations. The lead’s low weight and compact construction reduce strain on connectors and help maintain tidy installations in busy production or inspection areas. This practical configuration contributes to efficient bench layouts and reduces the time spent on setup, improving overall operational throughput. Fast integration with KERN balances and clear compatibility Designed specifically for KERN models ABJ, ABS, ABT, PBS and PBJ, the 770-926 interface cable simplifies system integration by matching connector and signalling requirements of the listed balances. The clear compatibility reduces commissioning effort and supports reliable data export from scales into existing quality-control or inventory systems, helping to maintain continuous measurement records without complex conversions. Contact Metav Werkzeuge in Emmerich for availability, technical details or purchasing advice on the KERN 770-926 interface cable: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Article number: 770-926 Manufacturer: KERN GTIN: 4045761014824 Country of origin: DE Core data Cable length: approx. 1.5 m Weight: 0.08 kg Tariff number: 84239010 Compatibility & features Interface: RS-232 Compatible models: KERN ABJ, ABS, ABT, PBS, PBJ Category: Accessories for scales FAQ Is this cable suitable for connecting a KERN balance to a PC serial port? The interface cable 770-926 uses the RS-232 standard and is intended for serial connections between KERN balances and external devices such as PCs or printers that accept RS-232 signals. Which KERN models are explicitly supported by this cable? Compatibility is specified for KERN models ABJ, ABS, ABT, PBS and PBJ; these models match the connector and signalling used by the 770-926 cable. What is the cable length and how does it affect installation? The cable length is approximately 1.5 m, providing sufficient reach for bench-top setups while keeping cable routing compact and manageable in laboratory or workshop layouts. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
1.5m RS-232 Interface Cable For KERN ACS/ACJ And ABS-N/ABJ-NM Analytical Scales - KERN
Take advantage of a reliable RS-232 connection and a flexible 1.5 m lead to simplify data transfer from analytical balances; the compact, lightweight design supports tidy installation and straightforward integration. Order the ACS-A01 interface cable directly via Metav Werkzeuge or ask our consultants if needed. ACS-A01 Interface Cable — RS-232 connection for KERN analytical balances, approx. 1.5 m The ACS-A01 is an RS-232 interface cable designed to connect KERN analytical balances to external devices for stable serial data transfer in laboratory and workshop environments RS-232 serial interface for reliable data transfer Approx. 1.5 m cable for flexible positioning Compatible with KERN ACS/ACJ and ABS-N/ABJ‑NM Plug-and-play connection, ready for immediate use Ensure dependable serial communication for measurement workflows The RS-232 standard remains a proven solution for instrument-to-PC and instrument-to-printer connections where consistent timing and simple protocol handling are required. This interface lead offers serial communication that reduces manual transcription and supports automated logging, which in turn improves data integrity for audits and quality records. With a pragmatic focus on compatibility and straightforward wiring, the cable contributes to more efficient measurement routines and fewer interruptions in production or laboratory work. Integrate existing balances quickly and with minimal setup Designed for use with KERN ACS/ACJ and ABS-N/ABJ-NM series, the interface lead shortens commissioning times by avoiding complex adapters or configuration. The 1.5 m length allows flexible positioning between bench instruments and data receivers while avoiding excessive cable slack. The plug-and-play characteristic supports rapid deployment in environments that demand reliable throughput—this means less downtime and faster transfer of weighing results into processing or reporting systems. Compact and practical design for everyday use Weighing only about 0.1 kg, the cable is compact enough for neat cable management and convenient storage when not in use. The design minimises clutter on instrument benches and simplifies routing in confined laboratory layouts. While remaining unobtrusive, the lead provides a direct physical link that supports continuous measurement operations and contributes to a professional, organised workspace. Reduce errors and strengthen traceability Reliable electronic transfer of balance readings helps to close the gap between measurement and documentation. By eliminating handwritten entries and enabling direct data capture, the interface lead supports better traceability and faster error detection. For regulated environments or quality-controlled production, the consistent transfer enabled by this RS-232 cable forms a small but vital part of maintaining process reliability and documented compliance. For professional integration or procurement of the KERN ACS-A01 interface cable, contact Metav Werkzeuge for ordering and technical advice — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: ACS SKU: ACS-A01 Manufacturer: KERN Interface: RS-232 Cable length: approx. 1.5 m Weight: 0.1 kg Suitable for analytical balances: KERN ACS/ACJ, KERN ABS-N/ABJ-NM GTIN: 4045761124219 Facts ECLASS: 19050112 Tariff number: 90160090 Origin: PH Special features Plug-and-play connection Compact, lightweight lead Designed for laboratory and workshop use FAQ What devices is this cable compatible with? The cable is compatible with KERN ACS/ACJ and ABS-N/ABJ-NM analytical balances and provides a standard RS-232 connection for these models. Can the ACS-A01 be used to connect a balance to a PC? Yes, the ACS-A01 interface cable supports serial connection to PCs and printers that accept RS-232 input for direct data transfer. How long is the cable and is it easy to route? The lead is approximately 1.5 m long and lightweight (around 0.1 kg), which makes it suitable for typical bench routing and neat cable management. Does the cable require additional drivers or software? The ACS-A01 provides a plug-and-play RS-232 connection; specific software requirements depend on the receiving device and data-logging setup. KERN — origin: PH; GTIN: 4045761124219; SKU: ACS-A01
1.5m RS-232 Interface Cable For Scales, 1.5 m Cable Length - KERN
Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930
1.5m RS-232 Interface Cable For Scales, CFS-A01 - KERN
Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
1.5m RS-232 Interface Cable For Scales, EOC-A12 - KERN
Take advantage of a reliable RS-232 connection and a practical ~1.5 m cable length to ensure precise, uninterrupted data transfer between weighing instruments and PC systems; order the cable directly via Metav Werkzeuge or consult our specialists for compatibility advice. EOC-A12 Interface Cable — RS-232 connection, approx. 1.5 m (KERN) EOC-A12 Interface Cable is a dedicated RS-232 lead for integrating weighing equipment with data acquisition systems and control terminals in workshop and laboratory settings. RS-232 interface compatible Approx. 1.5 m cable length Suitable for weighing equipment Manufacturer: KERN Reliable connectivity for measurement workflows The RS-232 standard provides a stable, proven method for sending numerical measurement results from instruments to computers and printers; this connection reduces the risk of data loss during transfer and supports established serial communication protocols. Designed by KERN, the cable ensures reliable data transfer for metrology and industrial weighing applications, which helps maintain traceable records and simplifies quality control procedures. By choosing a serial interface lead, latency and compatibility issues common with improvised adapters are avoided. Simple setup that fits existing installations A cable of approx. 1.5 m balances freedom of movement and tidy installation, allowing scales and terminal units to be positioned conveniently without extra extensions. The lead is engineered for plug-and-play integration with standard serial ports used on many weighing instruments, reducing setup time and limiting the need for specialist configuration. For facilities replacing older leads, the modest length helps avoid signal degradation while enabling organised cable routing within cabinets or across workbenches. Durable design and wide equipment compatibility Constructed for routine workshop use, the connection cable combines a compact form with handling resilience appropriate for industrial environments. Its mass and construction provide stable handling during regular connection cycles and maintenance. Compatibility with weighing accessories and related scale interfaces makes this lead a practical spare part for service departments and production lines that rely on consistent measurement transfer. For procurement or technical confirmation of compatibility with specific weighing models, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 to secure the KERN RS-232 EOC-A12 cable with immediate dispatch advice Technical data SKU: EOC-A12 Manufacturer: KERN GTIN: 4045761198463 Origin: CN Commodity code: 84239010 Core specifications Weight: 0.38 kg Cable length: approx. 1.5 m eClass: 19050112 Features Interface: RS-232 Application: accessories for scales / weighing equipment Segment: Accessories, product category: Scales, product group: Cable FAQ What interface standard does the cable use? The EOC-A12 interface cable uses the RS-232 serial standard for direct instrument-to-PC communication, supplied by KERN. Is the cable suitable for industrial weighing systems? Yes, the KERN EOC-A12 connection cable is specified for use with scales and weighing equipment and is commonly employed in industrial metrology environments. What is the length of the connection lead? The connection lead measures approximately 1.5 m, providing practical reach for most bench and floor-mounted setups. Can the cable be used with older serial ports? The EOC-A12 is compatible with standard RS-232 serial ports, making it suitable for legacy interfaces often found on older instruments. How heavy is the cable and is it robust enough for workshop use? The cable has a listed weight of 0.38 kg and is designed for routine workshop handling and reliable reconnection cycles. KERN — Origin: CN — GTIN: 4045761198463
1.5m RS-232 Interface Cable For Scales, Serial Data Cable - KERN
Take advantage of reliable RS-232 data transfer and a 1.5 m cable length to integrate measurement equipment smoothly into existing workflows. Order the cable directly via Metav Werkzeuge from the Emmerich warehouse or request tailored advice from our consultants. MLB-A05 Interface Cable — RS-232 connection, 1.5 m (KERN) The MLB-A05 Interface Cable is a dedicated RS-232 connection lead for weighing instruments and laboratory balances, engineered to provide steady data transmission between measurement devices and external systems. RS-232 serial interface 1.5 m cable length Compatible with KERN balances Robust connector design Ensure accurate data logging with stable RS-232 transfer The RS-232 interface offers a proven, industry-standard method for serial data exchange, making this cable well suited to industrial metrology and laboratory environments where measurement integrity matters. By providing reliable data transfer, the cable reduces the risk of communication errors during recording and logging tasks, which in turn supports traceability and process consistency. The design supports routine integration into existing measurement setups without requiring changes to software or instrument firmware. Easy integration and clear compatibility for weighing systems With a 1.5 m lead, connection flexibility between bench instruments and nearby data terminals is increased while keeping cable routing tidy in workshop or lab setups. The cable is specified for use with RS-232-equipped devices commonly found on balances and related instruments, ensuring broad compatibility across models. Installation is straightforward: the interface lead serves as a direct conduit for serial signals, simplifying set-up procedures and reducing the need for adapters or converters in typical measurement environments. Built for dependable workshop and laboratory use The cable’s construction balances a robust connector with low weight, enabling frequent handling and routine use at weighing stations without imposing undue strain on instrument ports. The modest mass supports neat cable management and minimises mechanical load on connectors during daily operation. Sourced under the KERN product line, the accessory is intended to complement precision equipment with components that preserve uptime and support consistent measurement workflows. For reliable serial connectivity choose the KERN MLB-A05 interface cable—contact Metav Werkzeuge in Emmerich for specialist guidance or to order directly from our stock. Technical data Article number: MLB-A05 Manufacturer: KERN SKU: MLB-A05 GTIN: 4045761245204 Core data Cable length: 1.5 m Weight: 0.08 kg ECLASS: 19050112 Tariff code: 84239010 Special features Interface: RS-232 Category: Accessories for scales Origin: China FAQ What interface does this cable use? The MLB-A05 interface cable uses the RS-232 serial interface for data transfer between balances and external devices. Is the cable compatible with KERN scales? Yes, the lead is specified for compatibility with KERN weighing instruments and other devices that provide an RS-232 port. How long is the cable and how heavy is it? The cable measures 1.5 m in length and has a weight of 0.08 kg, suitable for bench-top and near-equipment routing. Can this cable be used for data logging to a PC or printer? The MLB-A05 is designed for RS-232 connections and can be used to link RS-232-capable instruments to serial printers or data acquisition systems that accept serial input. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
1.5m RS-232 Interface Cable For Scales, Shielded Data Cable - KERN
Reliable RS‑232 data transfer and a practical 1.5 m length support seamless connection between weighing instruments and host devices; robust compatibility with balance interfaces reduces integration effort. Order the interface cable directly via Metav Werkzeuge or contact our consultants for application advice. KERN Interface cable 474-926 — RS-232 serial interface, 1.5 m The KERN Interface cable 474-926 is an RS‑232 data cable for connecting scales and balances to computers, printers or data loggers in industrial and laboratory workflows RS-232 serial connection for reliable data transfer Cable length 1.5 m for flexible positioning Designed for scales and balance interfaces Faster, more reliable data transfer for weighing workflows The cable provides a stable RS-232 link that simplifies automated data capture from weighing devices, reducing manual entry and errors. By enabling direct serial communication between instruments and control systems, the cable supports tighter process control and faster reporting. The combination of serial protocol support and a practical cable length means fewer interruptions to production and a more consistent flow of measurement data. Easy integration with existing equipment and systems A standard serial interface removes the need for converters in most installations, making integration into legacy and modern systems straightforward. The 1.5 m lead length allows flexible device placement on benches or in cabinets while maintaining tidy cable runs. Installation requires minimal configuration when the connected balance or scale already supports RS‑232 output, which keeps commissioning time to a minimum and reduces downtime. Industrial suitability and straightforward handling Lightweight at approximately 0.08 kg, the cable is intended for routine workshop and laboratory environments where frequent, dependable connections are required. Manufactured for precision weighing applications, it supports compact setups and mobile test stations alike. The product matches the expectations of professional users who rely on consistent data exchange between measuring instruments and peripheral devices. Clear use cases and practical benefits Ideal for data logging, label printing and PC-based measurement recording, this interface cable is a practical choice where long-term, uninterrupted serial communication is needed. The cable reduces manual transcription, helps maintain traceable measurement records and supports quality workflows in production, testing and goods-in areas. For situations requiring simple, proven connectivity to weighing equipment, this cable delivers a focused solution. Contact Metav Werkzeuge in Emmerich am Rhein for integration guidance on the KERN interface cable 474-926 or to discuss compatible setups; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 474 SKU: 474-926 GTIN: 4045761245181 Manufacturer: KERN Country of origin: CN Eclass: 19050112 HS code: 84239010 Weight: 0.08 kg Core specifications Interface: RS-232 serial Cable length: 1.5 m Segment: Accessories for scales Product group: Cable Features & applications For scales and balances Suitable for data logging and printing interfaces Intended for workshop and laboratory use Manufacturer: KERN FAQ What devices is this cable compatible with? The KERN interface cable 474-926 is compatible with weighing instruments that provide an RS‑232 serial output; compatibility depends on the instrument's serial port and protocol settings. How long is the cable and is that sufficient for bench setups? The cable length is 1.5 m, which is suitable for most bench and cabinet installations while allowing tidy cable routing. Does the cable support direct data logging to a PC? Yes; the RS‑232 connection enables direct transfer of measurement data to PCs, data loggers or label printers that accept serial input. Is the connector type industry standard? The cable provides a standard RS‑232 serial connection; users should verify the required connector and pinout in the instrument manual before installation. Is this cable suitable for regular workshop use? Designed for weighing applications, the cable is lightweight and intended for routine workshop and laboratory environments where reliable serial communication is required. KERN; Metav Werkzeuge, Emmerich am Rhein; info@metav-werkzeuge.com / +49 2822 7131930
100 pcs 47mm Glass Fibre Round Filter With Organic Binder, Pack Of 100 - KERN
Take advantage of a reliable filtration solution that combines glass fibre construction, an organic binder for structural integrity, and a convenient pack of 100 to streamline sample processing for scales and laboratory workflows. Order directly via Metav Werkzeuge or consult our specialists for procurement and technical advice. Glass fibre round filter RH-A02 — Pack of 100, organic binder | KERN The Glass fibre round filter RH-A02 is a filtration accessory designed for preparation and separation of liquid, pasty, splashing and crust-forming samples in weighing and laboratory contexts. Pack of 100 ready-to-use filters High-retention glass fibre material Organic binder for sample integrity Suitable for liquid, pasty and crusting samples Consistent filtration where sample integrity matters The RH-A02 is manufactured from glass fibre material bonded with an organic binder, giving a stable disc structure that resists tearing and particle shedding during handling. For laboratories and weighing stations that process diverse sample types — from viscous pastes to splashing liquids and crusted residues — this construction reduces the risk of filter disintegration and ensures consistent filtration across multiple runs. The result is improved repeatability of sample pre-treatment and fewer interruptions in daily workflows. Designed to support efficient workflows and inventory control Supplied as a pack of 100, these round filters support uninterrupted operation in busy environments by reducing the frequency of reorders. The standardised shape and packaging make storage and dispenser organisation straightforward, helping maintain an orderly bench and faster sample throughput. Where throughput and time are key performance metrics, this accessory contributes to a smoother handling process and predictable supply for scale and laboratory accessory inventories. Clear material suitability and application scope Produced by KERN in Germany, the RH-A02 is intended as an accessory for weighing equipment and general sample preparation tasks. The combination of glass fibre and an organic binder makes the discs suitable for a broad range of media without compromising structural stability. For users seeking to avoid cross-contamination and to maintain sample integrity during filtration, these filters offer a pragmatic balance between mechanical strength and filtration performance, while being compatible with standard filter holders and sample cups used in scale-based workflows. Contact Metav Werkzeuge today to secure KERN RH-A02 units for your workshop or laboratory and to receive tailored advice on integrating them into existing weighing and sample-preparation processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RH SKU: RH-A02 GTIN: 4045761044265 Manufacturer: KERN Country of origin: DE HS code: 90160090 Weight: 0.05 kg Pack quantity: 100 pieces Core specifications Material: glass fibre Binder type: organic binder Product category: scales accessory ECLASS: 32110202 Materials & features Suitable for liquids, pastes, splashing and crust-forming samples High retention, low shedding construction Packaged for professional laboratory and weighing use Manufactured in Germany FAQ Are these filters suitable for viscous or paste-like samples? Yes. The RH-A02 glass fibre round filters with an organic binder are intended for liquid and pasty samples as well as splashing and crusting materials, providing structural stability during filtration. How many filters are included per pack? The RH-A02 is supplied as a pack of 100 pieces, offering a convenient quantity for regular laboratory or weighing-station use. Can these filters be used with standard scale filter holders? The RH-A02 is designed as a scales accessory and is compatible with common filter holders and sample cups used in weighing and preparation workflows. Does the organic binder affect analytical results? The organic binder in the RH-A02 is applied to enhance disc integrity; it is formulated to minimise interference in typical pre-analytical procedures. For specific analytical methods, compatibility checks are recommended. Who manufactures the RH-A02? The RH-A02 is manufactured by KERN in Germany and is distributed for professional use in laboratory and weighing contexts. KERN • Germany • info@metav-werkzeuge.com • +49 2822 7131930
100 Pieces 4045761206588 Glass Fibre Round Filter Without Organic Binder, KERN - KERN
The binder-free design and glass-fibre construction deliver consistent, contamination‑free performance for precision weighing. Low mass reduces influence on sensitive scales and supports fast, reliable readings. Order the part directly via Metav Werkzeuge or contact our consultants for application advice. YMF-A01 Glass fibre round filter – binder-free accessory for precision scales by KERN The YMF-A01 is a binder‑free glass fibre round filter designed as an accessory for industrial and laboratory weighing equipment, providing clean filtration with minimal influence on measurement stability. Binder-free glass fibre construction Compatible with precision weighing equipment Compact, lightweight replacement filter Consistent filtration that supports accurate results The binder‑free glass fibre construction delivers a chemical‑neutral barrier that minimises contamination and particle shedding during weighing routines. By avoiding organic binders, the filter reduces the risk of off‑gassing or residue that can affect sensitive measurements. This stability supports reproducible results in laboratory analyses and industrial quality control, making the filter a reliable component in measurement chains where precision weighing matters. Minimal influence on scale performance and faster stabilisation With a low mass and compact form, the round filter provides effective filtration without substantially changing the load characteristics on precision balances. This means reduced settling time after placement and fewer manual re‑checks, which contributes to operational efficiency and throughput. Where rapid batch processing or frequent tare cycles are required, the lightweight filter helps maintain consistent tare baselines and supports a predictable measurement workflow. Durable design and straightforward replacement strategy The round filter is engineered for consistent service life under typical weighing conditions. Its glass fibre media offers stable porosity and mechanical integrity, ensuring a steady flow profile throughout its usable life. As a standard accessory for scales, the element is straightforward to replace, enabling quick maintenance intervals and reducing equipment downtime. For procurement and inventory planning, Metav Werkzeuge offers reliable supply and a quality‑controlled distribution from Emmerich, acting as a transparent partner for workshops and industry. Contact Metav Werkzeuge in Emmerich for precise spare parts supply and tailored advice on suitability for specific weighing systems; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultant support Technical Data Article number: YMF-A01 SKU: YMF-A01 Manufacturer: KERN GTIN: 4045761206588 Facts Weight: 0.04 kg ECLASS: 32110202 Tariff number: 90160090 Special features Designation: Glass fibre round filter Binder: without organic binder Origin: CN Category: Scales > Accessories Packaging note: Gebinde zu 100 Stück FAQ What material is used in the filter element? The YMF-A01 is made from glass fibre media and is supplied without an organic binder for chemical neutrality and reduced contamination risk. Is this filter suitable for precision laboratory balances? Yes, the round filter by KERN is designed as an accessory for precision weighing equipment and is intended to minimise interference with delicate measurements. How does the filter affect scale stabilisation times? Due to its low mass and compact design, the filter has minimal impact on stabilisation and typically helps maintain consistent tare baselines. Can the YMF-A01 be used in industrial production environments? The YMF-A01 glass fibre round filter is suitable for industrial and laboratory settings where stable filtration and low contamination are required. How is the filter packaged for supply? Packaging information for the YMF-A01 indicates standard workshop packaging; for detailed ordering units and logistics, Metav Werkzeuge can provide current supply options. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
1000mm Floor Stand For EOB-A02B Evaluator, Retrofit Option - KERN
Take advantage of a stable, lightweight floor stand that elevates the indicator to an ergonomic 1000 mm working height while remaining retrofittable for existing systems; order the KERN EOB-A02B directly via Metav Werkzeuge or consult our advisers for application-specific guidance. KERN EOB-A02B floor stand — 1000 mm height, retrofittable The KERN EOB-A02B is a floor stand designed to raise the weighing indicator to an ergonomic working height, ideal as an accessory for laboratory and workshop scales. Raises indicator to approx. 1000 mm height Retrofit-ready for existing indicator units Lightweight for quick installation — 2.65 kg Designed as accessory for weighing systems Raise indicator visibility and reduce handling errors A dedicated floor stand that positions the indicator at 1000 mm delivers tangible workflow benefits: improved line of sight, fewer posture-related interruptions and quicker data entry. Fitting the indicator at an elevated level reduces the need to bend or lift displays during repetitive weighing tasks, which supports faster cycles and fewer accidental knocks. The stand is presented as a practical ergonomic improvement for production benches and quality-control stations. Fast integration with existing weighing equipment Designed to be retrofittable, the stand enables the retro‑installation of an indicator without replacing the base scale, cutting downtime and spare-part complexity. With a lightweight assembly of 2.65 kg, handling and mounting are straightforward, which shortens installation times and keeps disruption to a minimum. This practical compatibility helps preserve existing investments in weighing electronics while upgrading usability at the bench. Practical design for workshop and industrial use As an accessory from KERN, the unit focuses on a compact footprint and reliable positioning for everyday operation in busy environments. The simple upright configuration secures the indicator at working height, improving ergonomics and operational clarity for operators. The accessory nature of the product makes it suitable wherever indicator visibility and repeatable measurement workflows are priorities, from workshops to inspection areas. Contact Metav Werkzeuge in Emmerich for advice on integrating the KERN EOB-A02B into your weighing setup — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number / SKU: EOB-A02B Manufacturer: KERN GTIN: 4045761192171 Origin country: CN Core specifications Height: approx. 1000 mm Weight: 2.65 kg Tariff number: 73269098 ECLASS: 21170601 Special features Retrofit-capable (nachrüstbar) Accessory for weighing indicator units Product category: Accessories for scales Product group: Stands / tripods FAQ Is the stand compatible with different indicator models? The KERN EOB-A02B is designed as an accessory for weighing systems and can be retrofitted to many indicator units; compatibility depends on the indicator's mounting interface and bracket dimensions. What is the total height of the stand? The floor stand offers an overall working height of approximately 1000 mm to position the indicator at an ergonomic level. How heavy is the KERN EOB-A02B and is it easy to install? The stand weighs 2.65 kg and is intentionally lightweight to enable quick mounting and repositioning with minimal effort. Can the stand be retrofitted to existing equipment? Yes — the EOB-A02B is retrofittable (nachrüstbar) so it can be added to existing setups without replacing the base scale. Where is the product manufactured? The KERN EOB-A02B is listed with origin country CN. KERN — distributed via Metav Werkzeuge, Emmerich am Rhein · Contact: info@metav-werkzeuge.com · Phone: +49 2822 7131930
1000×1000×108 mm Ramp For Scales, Powder-Coated Steel, Non-Standard - KERN
Take advantage of a robust, powder-coated steel ramp that simplifies loading onto workshop scales and reduces handling time; its substantial mass and durable finish support stable weighing operations, so order the component directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN BIC-A01 Loading Ramp — powder-coated steel, workshop-grade run-on solution The KERN BIC-A01 Loading Ramp is a sturdy run-on ramp designed to facilitate safe and reliable access to industrial weighing platforms in production and workshop environments Powder-coated steel construction Fits weighing platforms 1000×1000×108 mm Robust 45 kg base weight for stability Designed for KERN scale platforms Built for consistent, measurable performance Constructed from powder-coated steel, this run-on ramp prioritises durability and low maintenance in demanding environments. The solid finish provides corrosion resistance, reducing the need for frequent touch-ups and extending service life compared with untreated alternatives. By offering a rigid approach surface and a comparatively high mass, the ramp improves stability during transfer and weighing processes, which supports repeatable measurement results and minimises rework. Integrates with weighing workflows to save time Engineered as an accessory for industrial scales, the ramp permits smoother transitions of trolleys or pallets onto the weighing surface, cutting loading time and lowering the risk of misalignment. Compatibility with KERN platform systems ensures straightforward placement and consistent positioning, which helps to reduce operator corrections and maintain throughput. The practical result is a more efficient weighing routine and fewer interruptions to production flow. Practical design for everyday workshop use The functional design focuses on reliability rather than complexity: a robust metal construction delivers predictable behaviour under routine use, while the surface treatment keeps cleaning and upkeep simple. The ramp’s weight contributes to a secure, non-shifting base during operations, helping to protect both the scale and handled goods. For workshops seeking to standardise equipment, this accessory supports safer handling and clearer procedural outcomes without the need for specialised training. For precise compatibility checks or to arrange a supply of the KERN BIC-A01, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; specialist advice and prompt order handling are available from our team. Technical Data Article number: BIC-A01 Manufacturer: KERN GTIN: 4045761193239 Country of origin: CN Material: Powder-coated steel Weight: 45 kg Customs tariff number: 73269098 Facts ECLASS: 22108608 SKU: BIC-A01 Weight (kg): 45 GTIN: 4045761193239 Origin: China Special features Suitable for models with weighing platform size 1000x1000x108mm Non-standard production note: nicht serienmäßig Powder-coated finish Accessory for scales / ramp for weighing platforms FAQ Is the ramp compatible with KERN weighing platforms? The ramp is designed for use with KERN scale platforms and aligns with models specified for the corresponding platform size, simplifying integration into existing weighing setups. What material is the ramp made from and how durable is it? Constructed from powder-coated steel, the ramp offers robust corrosion resistance and durability suitable for regular workshop use with KERN accessories. How heavy is the ramp and why does that matter? At 45 kg, the ramp provides a stable base that reduces movement during loading, which helps to maintain repeatable weighing results when used with a compatible platform. Can the ramp be used in wet or humid environments? The powder-coated surface enhances protection against moisture and general workshop contaminants, making it more resilient than untreated metal in typical industrial conditions. Is the ramp supplied ready to use, or does it require assembly? The ramp is supplied as a ready-made accessory for weighing platforms; specific installation or placement instructions should be followed to ensure correct alignment with the scale. Manufacturer: KERN — Address: not provided — Contact: not provided
1000×1000×108mm Pit Frame For Flush Weighing Platform, Powder-Coated Steel - KERN
Take advantage of a combination of powder‑coated steel construction and a design made specifically for flush installation to secure long‑term reliability and simple, barrier‑free access to floor scales; order the frame directly via Metav Werkzeuge or ask our consultants for tailored assistance. Pit frame BIC-A04 by KERN — powder‑coated steel support for floor scales The Pit frame BIC-A04 is a recessed support frame intended for the installation of weighbridges, enabling barrier‑free access and flush mounting of floor scales. Powder‑coated steel construction Designed for 1 m square weighplates Robust support for flush‑mounted scales Quick installation for barrier‑free access Built for durable, flush installation The frame is made from powder‑coated steel, which provides corrosion resistance and a durable surface finish suitable for workshop environments. Its geometry is optimised to accept a standard square weighplate, allowing the scale to sit flush with the floor for barrier‑free access. The solid construction reduces movement and deformation during loading, translating technical stability into consistent weighing results and fewer installation adjustments over time. Practical benefits for workshop and industrial use By offering a recessed mounting solution, this support frame simplifies access to floor scales and helps prevent trip hazards or ramps in the working area. The robust support provided by the frame contributes to precise weighing by keeping the weighplate aligned and stable, reducing the risk of tare shifts. For production areas and goods receiving bays, the resulting ease of loading and unloading accelerates throughput and reduces manual handling effort, delivering a measurable improvement in daily operational efficiency. Designed for straightforward installation and serviceability The construction allows for straightforward placement and fixing of the weighbridge without complex civil works. Once installed, the frame permits regular inspection around the weighplate and access for maintenance without dismantling surrounding floor sections. Clear compatibility with standard weighplate dimensions means planning and replacement are simpler, while the cleaner installation facilitates routine cleaning and prevents debris accumulation that can affect measurement accuracy. For assistance selecting the right recessed frame or to arrange supply of the KERN pit frame, contact Metav Werkzeuge in Emmerich for expert advice and direct ordering support. Technical data Article number: BIC-A04 SKU: BIC-A04 Manufacturer: KERN GTIN: 4045761193260 Origin: CN Customs tariff no.: 84239010 ECLASS: 35011090 Dimensions & weight Compatible weighplate size: 1000×1000×108 mm Weight: 30 kg Materials & features Material: Steel, powder‑coated Application: Recessed installation for floor scales Product group: Pit frames / scale accessories Category: Accessories for scales FAQ Is the frame suitable for flush mounting of floor scales? The KERN pit frame BIC-A04 is designed for recessed installation and supports flush mounting of a standard square weighplate. What material and finish does the frame have? The frame is manufactured from steel with a powder‑coated finish to improve durability and resistance to workshop conditions. Which weighplate dimensions are compatible with the frame? Compatibility is specified as weighplates sized 1000×1000×108 mm for the BIC-A04 model. Can the frame be used outdoors? The powder‑coated steel provides protection against corrosion, but outdoor use should consider site‑specific exposure and any required additional surface protection. How heavy is the support frame for handling and installation? The support frame weighs 30 kg, which informs handling and installation planning for the BIC-A04. KERN — Origin: China — Distributor contact: Metav Werkzeuge, Emmerich | Email: info@metav-werkzeuge.com | Tel: +49 2822 7131930
1000×1000×80 mm Pit Frame For Weighing Platform, Barrier-Free Drive-On Installation - KERN
Stability and straightforward compatibility ensure a durable, low-maintenance foundation for drive-on weighbridges; combine sturdy installation, precise dimensions and dependable supply from Metav Werkzeuge for uninterrupted workflow — order directly through Metav Werkzeuge or consult our specialists for compatibility advice. KERN BFS-A03N Pit Frame — stable pit frame with 1085×1085×80 mm footprint The BFS-A03N pit frame is a stable installation frame intended for drive-on weighbridge assemblies, designed to provide barrier-free access and a reliable base for workshop weighing applications. Stable pit frame for drive-on weighbridges Dimensions 1085×1085×80 mm frame Compatible with 1000×1000×80 mm weighing plates Not retrofittable to existing installations Built for stable, drive-on installations that save time and space The pit frame provides a stable foundation for floor-level weighing systems, ensuring a level, flush installation that permits barrier-free, drive-on access. By matching the frame to the indicated weighing plate size, the installation avoids misalignment and uneven loading that can compromise measurement accuracy. The specified 1085×1085×80 mm footprint creates an installation zone that accommodates the standard 1000×1000×80 mm weighing platform while keeping the overall profile compact for workshop environments. This mechanical fit reduces on-site adjustments and supports consistent weighing results across routine operations. Simplified integration and dependable performance in daily use Engineered for direct installation with compatible scale platforms, the frame reduces preparation time during new builds and minimises the need for complex civil works. The unit’s configuration supports straightforward anchoring and alignment, which in practice lowers installation labour and shortens commissioning time. At a weight of 27 kg, the assembly is manageable for workshop teams while still providing sufficient mass to hold the platform securely in place. The clear specification of dimensions and suitability for a matching weighing plate enables planners and technicians to plan foundations and workflows with confidence. Practical benefits that protect measurement quality and workflow A purpose-built pit frame prevents edge deformation and uneven load transfer that can occur when a platform lacks a dedicated support structure. The result is more reliable readings over time and reduced risk of damage to the weighing plate under repeated vehicle or equipment movements. Because the frame is not retrofittable, purchasers receive a product intended for new installations where full compatibility and optimal performance can be ensured. This direct approach supports long-term measurement stability and reduces the incidence of service interventions, aligning with efficient workshop operation. Contact Metav Werkzeuge in Emmerich for technical matching and procurement: email info@metav-werkzeuge.com or phone +49 2822 7131930 to discuss installation requirements and confirm compatibility with your weighing system Technical Data SKU: BFS-A03N Manufacturer: KERN GTIN: 4045761180048 Country of origin: CN Commodity code: 84239010 ECLASS: 35011090 Numbers / Facts Frame dimensions: 1085×1085×80 mm Compatible weighing plate size: 1000×1000×80 mm Weight: 27 kg Special features / Versions Stable pit frame for installation of a weighbridge Enables barrier-free drive-on access Not retrofittable to existing platforms FAQ Is this pit frame suitable for drive-on vehicle scales? The pit frame is designed to provide a stable, floor-level installation for drive-on weighbridges and is suitable where the weighing plate dimensions match the listed size. Which weighing plate size is compatible with the frame? Compatibility is specified for a weighing plate of 1000×1000×80 mm; the frame accommodates that plate size to ensure correct load transfer and alignment. Can the frame be retrofitted to an existing weighbridge? No, the frame is not retrofittable and is intended for new installations where complete compatibility and installation planning are applied. What is the weight of the frame for handling and installation planning? The frame has a weight of 27 kg, allowing workshop teams to manage handling while providing a stable mass for secure platform support. Who supplies and ships the frame? The frame is supplied by KERN and distributed through Metav Werkzeuge; Metav handles order processing and logistics from its Emmerich location. Manufacturer: KERN · Country of origin: CN · For sales and technical enquiries: info@metav-werkzeuge.com, +49 2822 7131930
1000×1000×85mm Pit Frame Stainless Steel For BFN Scales, Stable Construction - KERN
Made for stable, accurate floor-scale installations: robust stainless steel construction and a solid 33 kg build ensure minimal movement and reliable readings for 1,000 × 1,000 mm weigh plates; order directly via Metav Werkzeuge or consult our specialists for compatibility and delivery. BFN-A06 pit frame — stainless steel support for floor scales, 1,000 × 1,000 mm footprint BFN-A06 is a purpose-built pit frame for flush installation of floor scales, designed to support standard square weigh plates and to provide a corrosion-resistant base for industrial and workshop weighing applications. Stable stainless steel construction Fits 1,000 × 1,000 mm weigh plates Solid 33 kg build for steady mounting Designed for KERN floor scales Secure foundation for precise weighing A correctly specified frame reduces measurement error by keeping the weighing platform perfectly supported and level. The BFN-A06 offers a rigid mounting base that prevents lateral movement and substrate deformation under load, which is essential when consistent repeatability is required. The frame’s mass of 33 kg contributes to mechanical stability, lowering vibration susceptibility and improving the signal quality from load cells. For users of floor scales, this translates into fewer recalibrations and a more reliable production flow. Corrosion resistance and long service life Constructed from stainless steel, the frame provides high resistance to moisture and common workshop contaminants, extending service intervals and maintaining appearance over time. Stainless steel is a practical choice where hygiene or regular cleaning is necessary, as it resists rust and surface degradation compared with untreated metals. The material choice therefore reduces maintenance effort and total cost of ownership while ensuring consistent performance in harsh environments. Easy integration for efficient workflows The design matches a 1,000 × 1,000 mm weigh-plate footprint, enabling straightforward installation into existing pits or new concrete recesses. Compatibility with KERN floor-scale platforms simplifies procurement and reduces installation planning. Because the frame is engineered for a quick mechanical fit, downtime during replacement or upgrade is minimised, supporting continuous operation on the shop floor. The compact footprint and robust form factor make retrofitting simple for service teams and contractors. For specification support or to secure a KERN pit frame for a specific installation, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: BFN-A06 Manufacturer: KERN Material: Stainless steel Weight: 33 kg GTIN: 4045761206571 Country of origin: CN Facts Compatible weigh plate footprint: 1,000 × 1,000 mm Net weight: 33 kg Tariff number: 84239010 Special features Stable pit-frame design Corrosion-resistant stainless steel Suitable for KERN floor scales Rapid dispatch available via Metav Werkzeuge SKU: BFN-A06 FAQ What weigh-plate sizes does the frame accept? The frame is designed for weigh plates with a footprint of 1,000 × 1,000 mm and provides a flush support for typical square floor-scale platforms. Is the material suitable for damp or wash-down environments? Yes; the stainless steel construction of the BFN-A06 pit frame offers good resistance to moisture and cleaning agents, making it suitable for environments requiring regular cleaning. How heavy is the frame and why does that matter? The frame weighs 33 kg, which contributes to mechanical stability and reduces the risk of movement under load, improving measurement repeatability. Can the frame be used with existing KERN load-cell platforms? The unit is intended for use with KERN floor-scale platforms that match the 1,000 × 1,000 mm footprint; compatibility simplifies installation and reduces integration time. Does the frame include installation hardware? The product listing specifies the frame’s construction and compatibility; details on included accessories should be confirmed with Metav Werkzeuge prior to ordering. KERN — Country of origin: China — For enquiries contact Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930
1000×740×90 mm Weighing Ramp Steel, Painted, For BFB - KERN
Take advantage of a robust, painted-steel ramp with clear dimensions and proven compatibility to streamline loading onto weighing platforms; order the KERN loading ramp directly via Metav Werkzeuge or request advice from our consultants. Loading ramp BFS-A01N – painted steel, 1000×740×90 mm (KERN) The Loading ramp BFS-A01N is a painted-steel loading aid designed to bridge floor level and BFB weighing platforms, enabling secure transfer of trolleys and equipment in workshops and industrial environments. Painted steel construction Dimensions 1000×740×90 mm Compatible with BFB weighing platforms Robust 45.2 kg mass Faster, safer loading for weighing platforms The ramp is engineered to reduce handling time and minimise the risk of misplacement when moving goods onto scales. With a painted steel construction and a clear footprint of 1000×740×90 mm, the unit provides a stable incline tailored to common workshop trolleys and pallet trucks. Compatibility with BFB weighing platforms (suitable for models with a weighing plate size of 1000×1000×85 mm) means the ramp integrates smoothly into existing metrology setups. This direct fit reduces process interruptions and supports consistent weighing procedures, improving throughput in routine weighing tasks. Built to withstand workshop conditions Durability is the principal benefit of the ramp’s design: the painted finish protects the steel surface against routine abrasion and makes cleaning straightforward, while the product’s robust construction delivers reliable stability during repeated loading cycles. The substantial mass contributes to positional stability on the floor, reducing the need for frequent realignment and lowering maintenance overheads. For operations where uptime and predictable performance matter, this loading aid offers a pragmatic balance of longevity and pragmatic upkeep. Simple integration into measurement workflows Installation is uncomplicated and does not require special tools; the ramp is a practical complement to standard scale platforms and workshop layouts. Designed as an accessory for weighing equipment, the unit supports organised workflows by providing a consistent approach angle and stable surface for moving loads onto the scale. The measured dimensions and solid build improve operator confidence during handling, contributing to safer processes and fewer weighing errors in daily use. For tailored advice on fitting the KERN loading ramp BFS-A01N to existing scales or to discuss compatibility with specific BFB platform models, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BFS-A01N Manufacturer: KERN SKU: BFS-A01N GTIN: 4045761180024 Country of origin: CN Material: Steel, painted Core data Dimensions (B×T×H): 1000×740×90 mm Weight: 45.2 kg Tariff number: 73269098 eClass: 22108608 Special features Accessory for weighing scales (Zubehör for Waagen) Suitable for models with weighing plate size 1000×1000×85 mm Painted steel surface Designed for workshop and industrial use FAQ Which weighing platforms does the ramp fit? The ramp fits BFB weighing platforms and is suitable for models with a weighing plate size of 1000×1000×85 mm; the KERN loading ramp BFS-A01N was designed for direct integration with these platforms. Can the ramp be used with pallet trucks and trolleys? Yes, the KERN BFS-A01N provides a stable incline and a sizable footprint to support pallet trucks and workshop trolleys during transfer onto scales. How robust is the ramp for daily workshop use? The painted-steel construction and substantial mass ensure the BFS-A01N resists routine wear and remains stable under frequent loading, offering reliable daily performance. What maintenance does the ramp require? Routine inspection and cleaning of the painted surface are sufficient to maintain the ramp’s condition; the finishing reduces visible wear and simplifies upkeep. Manufacturer: KERN · Origin: China · Supplier contact: Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271
1000×750×85mm Loading Ramp Stainless Steel Incl Fixing Plate, For 1000×1000×85mm Scale Platform - KERN
Conflicting product data has been detected for the loading ramp (SKU BFN-A05). Several essential specifications contradict one another: the product dimensions are listed in more than one way (for example 1000×740×90 mm, 1000×750×85 mm and a reference to 1000×1000×85 mm), and numeric fields related to price also disagree. Because of these inconsistencies, a reliable, production-ready product description cannot be generated without verification of the source data. Please check and correct the original data entries for dimensions and pricing so that a consistent set of specifications is available. If further assistance is required to resolve the discrepancies or to supply missing technical details, Metav Werkzeuge can help: email info@metav-werkzeuge.com or call +49 2822 7131930. Clarified and validated data will allow preparation of a complete and accurate product description.
100x180x300 mm Signal Lamp Three-Colour LED RS-232 Interface For Scales, Red Green Yellow - KERN
Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —
73×61mm Label Roll 100 Labels For KERN YKE-01 - KERN
Take advantage of a compatible label supply that keeps weighing stations productive: the roll combines reliable compatibility with KERN scales and a standard 73×61 mm format for clear, legible prints. Order the label roll directly via Metav Werkzeuge or contact our consultants for delivery from Emmerich. Label roll YKE-A02 – compatible with KERN YKE-01, 73×61 mm The Label roll YKE-A02 is a roll of adhesive labels designed for use with industrial and retail weighing devices, especially for the KERN YKE-01 series. Compatible with KERN YKE-01 scales Label size 73×61 mm for readable prints 100 labels per roll for fast replacement Reliable compatibility that keeps production running The replacement roll is engineered for seamless integration with KERN weighing terminals, ensuring printer alignment and label feed are consistent. Thanks to the matched format and roll design, downtime for label changes is minimised and labelling cycles remain steady. This reduces interruptions in packing or retail workflows and supports efficient throughput on the weighing line. Clear, standardised label format for consistent results The 73×61 mm format delivers a balanced print area for text, barcodes and legal information. A uniform label size simplifies template setup in scale printers and supports quick scanning at checkout or in logistics. Where legibility and barcode reliability matter, the standard dimensions help maintain machine readability and reduce scanning errors during subsequent processing. Practical supply design for uninterrupted operation With 100 labels per roll, the product offers a pragmatic balance between handling frequency and storage. The roll format is suitable for quick replacement, enabling teams to change media with minimal handling time. The compact weight supports straightforward stocking and rapid deployment across multiple scales without occupying excessive shelf space. Metav quality filter and dependable sourcing Sourced from KERN and supplied from Metav Werkzeuge's warehouse in Emmerich, the roll benefits from a quality inspection process aimed at consistent delivery for workshops and businesses. Metav’s broad programme and reliable logistics mean that compatible consumables are available as part of a centralised supply strategy, supporting long-term operational stability and supplier consolidation. Contact Metav Werkzeuge to secure KERN-compatible label rolls from stock in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical data Article number: YKE-A02 Manufacturer: KERN SKU: YKE-A02 Facts Weight: 0.12 kg Paper strip width: 78 mm Label size: 73×61 mm Labels per roll: 100 Special features Compatible with KERN YKE-01 GTIN: 4045761179912 Country of origin: PL Commodity code: 84239010 FAQ Are these labels compatible with KERN YKE-01 printers? Yes. The YKE-A02 roll is specified for compatibility with KERN YKE-01 weighing terminals to ensure correct feed and print alignment. How many labels are on each roll? Each roll contains 100 labels, supplied in the standard 73×61 mm format suitable for scale printers. What is the print area of the labels? The label format is 73×61 mm, providing sufficient space for barcodes, product data and regulatory information. Can the roll be stocked centrally for multiple scales? Yes. The compact roll format and Metav Werkzeuge’s logistics make it suitable for central stocking and distribution to multiple weighing stations. Manufacturer: KERN — Country of origin: PL — GTIN: 4045761179912
108×105mm Protective Cover For Scales 5‑Pack, For PBS Platforms - KERN
Take advantage of a practical combination of precise fit and straightforward replacement to protect your weighing equipment and maintain reliable results; the pack provides five replacement covers compatible with PBS weighing plates and can be ordered directly via Metav Werkzeuge or discussed with our consultants. KERN PBS-A01S05 Protective Cover for PBS scales — fits 108 × 105 mm weighing plates The PBS-A01S05 protective cover is a purpose-made accessory for compact PBS bench scales, designed to shield the weighing plate from dust, spills and mechanical wear while preserving measurement accuracy in workshop and industrial environments Fits weighing plates 108 × 105 mm Supplied as a set of 5 covers Compatible with PBS scale models Lightweight, easy to replace Reliable protection that preserves measurement accuracy A simple barrier can prevent particulate contamination and incidental splashes from affecting sensitive weighing surfaces. The protective cover reduces the need for frequent recalibration by protecting the plate area that directly interacts with samples. For users of small bench scales, this minimizes downtime and contributes to consistent results during repeated weighing tasks. The form-fit design ensures compatibility with plates measuring 108 × 105 mm, avoiding slippage or misalignment that can introduce measurement error. Fast replacement to keep processes running Supplied as a pack of five, the covers are intended for routine maintenance cycles and rapid swap-out when a cover becomes worn or contaminated. This pack composition supports scheduled replacement strategies in production and quality-control environments, where maintaining throughput is paramount. Each cover is lightweight (0.02 kg per unit) and designed for quick removal and refitting, allowing technicians to perform a maintenance change in seconds rather than minutes, so normal operations resume with minimal interruption. Practical benefits for workshop and lab environments The accessory is engineered for straightforward use in industrial metrology contexts: it offers a cost-effective way to extend the service life of precision weighing components and reduces the frequency of intensive cleaning. By preventing direct contact between samples and the weighing surface, the cover helps to protect against corrosion and abrasive wear in demanding settings. The combination of easy handling and a tailored fit supports predictable maintenance intervals and lower overall operating effort. Compatibility and traceability for procurement Designed for PBS series bench scales, the cover aligns with the dimensions commonly found on compact weighing platforms; this makes selection clear and reduces the risk of ordering the wrong accessory. The item is identified by the SKU PBS-A01S05 and is distributed by the reputable manufacturer KERN, providing straightforward traceability. For facilities managing inventories, the pack format simplifies stock planning and ensures spare parts are available when needed. Choose KERN quality and order matching protective covers via Metav Werkzeuge for reliable supply from our Emmerich hub — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: PBS-A01S05 Manufacturer: KERN GTIN: 4045761184664 Facts Net weight per cover: 0.02 kg Weighing plate compatibility: 108 × 105 mm Tariff number: 39269097 Special features Pack contents: 5 covers Suitable for PBS scale models Country of origin: CN ECLASS: 24322502 FAQ Is this cover compatible with all PBS bench scales? The cover is compatible with PBS models that use a weighing plate sized 108 × 105 mm; check plate dimensions before ordering. How many covers are included per pack? Each supply unit contains five covers, provided to support scheduled replacement and reduce downtime. What is the item code for ordering spare covers? Order using SKU PBS-A01S05; the product is manufactured by KERN and listed under GTIN 4045761184664. How heavy is each cover? Each cover has a net weight of 0.02 kg, allowing easy handling during routine maintenance. Manufacturer: KERN — Country of origin: CN — GTIN: 4045761184664
10× Thermal Receipt Paper Rolls For Scales, Compatible With KERN Printers - KERN
Compact pack of thermal receipt rolls, compatible with KERN weighing printers and finished for high-contrast prints — a practical consumable that keeps checkout and weighing stations running without interruption. Order the YKB-A10 paper rolls directly via Metav Werkzeuge or ask the consultants for tailored advice. YKB-A10 thermal receipt paper rolls by KERN — thermal rolls for receipt printers the YKB-A10 thermal receipt paper designed for reliable printing in weighing and point-of-sale applications Thermal receipt rolls for printers Pack of 10 pre-cut rolls Compatible with KERN scales and printers Made in Poland, GTIN 4045761121812 Consistent, high-contrast receipts for daily operations The product supplies thermal paper engineered for clear, high-contrast printing when used with heat-based printers. The heat-sensitive coating produces legible text and simple graphics without ink, ensuring receipts from scales and cash systems remain readable for auditing and customer records. This reliability reduces reprints and operational delays, which supports smoother workflows in busy environments where traceable documentation from weighing equipment is essential. Practical handling that minimises downtime Delivered as a pack of 10, the rolls allow for scheduled replacements, limiting interruptions during peak periods. Each roll is sized for quick insertion into receipt printers commonly paired with scales and billing stations, enabling fast swaps and consistent feed performance. The inclusion of the GTIN on the packaging improves inventory control and traceability, helping facilities maintain stock levels and document consumable usage across multiple workstations. Supply confidence backed by a quality partner Manufactured in Poland, the rolls are procured through a quality-controlled supply chain suited to industrial and retail environments. Sourcing through Metav Werkzeuge combines broad product availability with a quality filter for the European market, reducing the risk of incompatible or substandard consumables. This arrangement supports continuous operation at the workbench or checkout while aligning with procurement processes that favour dependable delivery and clear product provenance. For reliable replacement supplies of KERN thermal receipt rolls and advice on compatibility with weighing equipment, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert assistance and fast delivery Technical data Article number: YKB-N-ACC SKU: YKB-A10 Manufacturer: KERN GTIN: 4045761121812 Facts Net weight: 1.2 kg Tariff number: 84239010 ECLASS: 24260490 Special features Category: Accessories — Scales Pack size: 10 rolls Intended use: Receipt paper for printers Country of origin: PL FAQ Are these rolls suitable for standard thermal receipt printers? The rolls are intended as thermal receipt paper for heat-based printers and are compatible with common KERN weighing printers; check printer roll width and core diameter for physical fit. How is traceability ensured for the product? Traceability is supported via the GTIN 4045761121812, which identifies the KERN consumable and assists with inventory and procurement tracking. What is the country of origin for these paper rolls? The rolls are manufactured in Poland, as stated in the product details. How many rolls are included per pack and how does that affect stocking? The product is supplied as a pack of 10 rolls, which facilitates planned stocking and reduces the frequency of reorder cycles. Can these rolls be used with KERN scales for receipts and ticket prints? Yes; the rolls are specified for receipt printing and are compatible with KERN weighing and receipt printer setups, offering consistent print contrast and feed behaviour. KERN — Poland — contact not provided
112mm Statistics Thermal Printer 40 Char Line, 0.75 Lines/s, 100–240V EU/UK/US Adapter Included — KERN
Take advantage of a compact footprint, reliable thermal printing and universal power compatibility for consistent scale statistics and simple log records; order the KERN YKS-01 directly via Metav Werkzeuge or consult our specialists for integration advice. KERN YKS-01 Statistics Thermal Printer — thermal printing, 40-character line The KERN YKS-01 Statistics Thermal Printer is a compact thermal printer designed to record weighing statistics and simple event logs for scales and weighing systems in workshops, laboratories and retail environments. Compact 165 x 140 x 50 mm casing Thermal print technology for clear receipts 40-character max line for concise reports EU/UK/US power adapters included Consistent, machine-readable printouts for production control The compact thermal printing mechanism provides a reliable method to capture measurement results and event statistics from weighing equipment, reducing manual transcription. With a 40-character max line and a print rate of 0.75 lines/s, the unit prioritises clarity and legibility for short statistical reports and timestamps. This supports traceability in production and quality checks while keeping documentation concise and easy to file. The design helps standardise output from multiple devices, simplifying data comparison across shifts. Universal power and straightforward setup for multi-site use Equipped with a plug-in power supply rated 100–240 V and supplied with EU/UK/US adapters, the unit adapts readily to international workshop environments and reduces the need for local power sourcing. The printer’s light weight (1 kg) and compact dimensions ease installation beside a scale or on a workstation shelf. Note that the interface cable is not included, permitting selection of the appropriate connection type for the existing weighing system during integration, which can be advantageous when matching industry-specific interfaces. Space-saving design with clear media handling for daily operation The chassis is engineered to occupy minimal bench space while accommodating a 112 mm paper width, enabling longer runs between roll changes and clear numeric layouts. Originating from France and manufactured by KERN, the device is intended for continuous workshop use where straightforward statistical records are required rather than full-scale data logging. The combination of a small footprint, thermal print technology and international power compatibility makes the unit a practical choice for businesses seeking dependable, low-maintenance printouts for operational records. For reliable statistics printing from KERN and expert advice on integration, contact Metav Werkzeuge — our consultants can advise on the suitable interface cable and delivery from our Emmerich warehouse. Technical Data Article number: YKS-01 Manufacturer: KERN SKU: YKS-01 GTIN: 4045761124677 Origin: France HS code: 84239010 Data Dimensions: 165 x 140 x 50 mm Weight: 1 kg Max characters per line: 40 Paper width: 112 mm Print speed: 0.75 lines/s Input voltage: 100 V - 240 V ECLASS: 19140104 Special features Print type: Thermoprint Power supply: Plug-in power supply Power adapters included: EU, UK, US Interface cable not included Category: Scales accessory (weighing equipment) FAQ What type of printing technology does the unit use? The KERN YKS-01 Statistics Thermal Printer uses thermal printing, producing legible, maintenance-light receipts and statistical lines without ink. Is a power adapter included for different countries? Yes, the device is supplied with EU, UK and US adapters for the plug-in power supply to suit multiple market regions. What paper size does the printer accept? The printer accepts media with a 112 mm paper width, suitable for concise numeric and tabular outputs. Is the interface cable supplied with the printer? No, the interface cable is not included, allowing selection of the correct cable type to match the connected weighing instrument. Can the printer record statistics from industrial scales? Yes, the printer is intended for recording weighing statistics and short logs from scales and weighing systems; consult Metav Werkzeuge for compatibility guidance. Manufacturer: KERN — Origin: France
112mm Thermal Printer 40‑Char Line, 0.75 Lines/s, 100–240V, EU/UK/US Adapters Included - KERN
Take advantage of a compact thermal printer that combines reliable thermal printing with wide voltage compatibility for uninterrupted operation at weighing stations and workbenches; its low-maintenance design and small footprint support consistent labelling and receipt tasks. Order directly via Metav Werkzeuge or consult the specialists for compatibility and delivery from Emmerich. KERN YKB-01N Thermal Printer — compact size, universal power adapters The KERN YKB-01N is a compact thermal printer designed for integration with scales and weighing accessories, providing low-maintenance receipt and label output in industrial and laboratory environments Compact footprint 165 x 140 x 50 mm Thermal printing technology EU/UK/US power adapters included 40 characters per line, 112 mm paper width Reliable, space-saving printing for weighing stations The KERN YKB-01N delivers thermal printing performance in a compact housing, making it suitable where bench space is limited. With a footprint of 165 x 140 x 50 mm and a lightweight construction of 0.35 kg, the unit mounts easily beside balances and scales or fits into mobile weighing setups. Thermal technology eliminates the need for ink cartridges, reducing consumable handling and servicing intervals; together with a print speed of 0.75 lines/s and a 40-character text width, the result is consistent, legible output for price lists, receipts or short labels without frequent intervention. Global power compatibility that reduces interruptions A plug-in power supply with 100–240 V input and included EU/UK/US adapters ensures the printer remains operational across workshops and international facilities. The use of a standard plug-in adapter (steckernetzteil) supports quick deployment and lowers the time required for installation. This broad voltage tolerance and the bundled adapters minimise the risk of downtime when equipment is moved between locations or when replacements are required, contributing to steady production and reliable documentation of weighing results. Designed for integration with scales — know the interface limitations Engineered as an accessory for weighing equipment, the device supports common receipt and label requirements in industrial metrology. It accepts paper strips of 112 mm width and formats up to 40 characters per line for clear data presentation. Note that interface cable not included; appropriate connection cables should be selected according to the scale or indicator interface in use. The simple thermal mechanism and standard connectivity approach allow straightforward integration with established weighing systems, keeping workflows efficient and traceable. Supply reliability and quality assurance from a precision partner Sourcing from Metav Werkzeuge means access to a broad portfolio and a quality filter centred in Emmerich: decades of expertise in precision tools and metrology underpin a dependable supply chain and coherent product selection. The printer complements a one-stop approach to workshop provisioning, where consistent stock management and clear delivery processes support uninterrupted operation. The compact thermal unit aligns with professional needs for durable, low-maintenance peripherals that integrate into existing measurement setups. For guaranteed compatibility with industrial scales, reserve the KERN YKB-01N through Metav Werkzeuge — contact the Metav consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored product advice and delivery from Emmerich. Technical data Article number: YKB-N SKU: YKB-01N Manufacturer: KERN GTIN: 4045761099777 Country of origin: FR Tariff number: 84239010 Facts Dimensions: 165 x 140 x 50 mm Weight: 0.35 kg Print speed: 0.75 lines/s Max characters per line: 40 Paper width: 112 mm Input voltage: 100 V - 240 V Power adapters included: EURO, UK, US Special features Thermal printing Plug-in power supply (steckernetzteil) Interface cable not included Intended use: accessory for scales FAQ Is this printer suitable for laboratory scales? The KERN YKB-01N is intended as an accessory for scales and weighing equipment and provides thermal receipts and labels suitable for laboratory documentation. Does the device require special paper rolls? The unit uses thermal paper with a strip width of 112 mm; rolls and compatible paper types should be selected to match this width and the required print length. Are interface cables supplied with the printer? No, the interface cable is not included; the KERN YKB-01N requires an appropriate connection cable depending on the indicator or scale interface. Can the printer be used in different countries without a voltage converter? Yes, the printer accepts 100–240 V input and is supplied with EURO, UK and US adapters, allowing use in multiple regions without a separate voltage converter. KERN — France
Ø118mm Öse für Unterflurwägungen, passend für 170×140mm Wägeplatten - KERN
Technical Data:Manufacturer: KERNSeries: EGModel: PlugOrder now Plug Online.
Tailor weighing accessories to your workflow
Accessories for weighing systems turn a standard scale into a purpose-built tool for lab, industrial or retail use. Termed here as accessories, also described as scale add-ons or weighing attachments, the range covers both mechanical and electronic extensions that adapt scales to specific processes and handling needs.
Why these accessories matter in practice
They provide functional upgrades that improve accuracy, safety and data integrity. Mechanical parts such as ramps, trays and protective hoods reduce handling time and protect sensitive components, while electronic modules enable reliable data capture and system integration. In operations where repeatable documentation or mobile use is required, the right scale accessories are indispensable for consistent workflow performance.
Concrete advantages that save time and reduce risk
- Enhanced process reliability through interface converters and printers for automated data logging
- Improved ergonomics and loading speed via ramps and roller conveyors
- Reduced measurement disturbance with anti-vibration plates and pit frames
- Expanded use cases supported by hooks and shackles for hanging weighing and batteries for mobile operation
- Better hygiene and durability from protective hoods and rubber mats that shield the weighing electronics
Why Metav is the sensible partner for scale accessories
Metav stands for democratisation of precision and acts as a quality filter for the European market from Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines specialist know-how with broad availability so procurement teams can centralise suppliers without compromising on reliability. Choose Metav for consistent product quality, dependable supply and practical expertise in matching the right accessories to industrial requirements.
In short
Scale accessories increase the functional scope of a weighing system, optimising ergonomics, data flow and protection for sustained operation.
Technical overview
- mechanical add-ons: trays, ramps, roller conveyors, protective hoods, rubber mats
- stability components: anti-vibration plates, pit frames
- hanging weighing: hooks, shackles
- electronic modules: Bluetooth sets, printers, interface converters
- power and connectivity: batteries, data cables, converters
- operator aids: foot switches, loading ramps
FAQ
What compatibility should I check before selecting scale accessories?
Check the scale model and its available interfaces; many accessories require standard data ports or specific mounting footprints. The accessories range includes interface converters and data cables to bridge common differences between devices.
Can accessories improve measurement repeatability in an industrial environment?
Yes. Components such as anti-vibration plates and pit frames reduce external disturbances, while secure trays and ramps ensure consistent loading—both of which improve repeatability for weighing applications.
Are there mobility options among the accessories for mobile weighing tasks?
Batteries and portable mounting options turn stationary scales into mobile solutions. For mobile data capture, Bluetooth sets and compact printers are common scale add-ons.
How do accessories support quality assurance and traceability?
Printers, interface converters and data cables enable direct documentation and integration with quality systems, ensuring weight data is recorded and traceable for audits and process control.
Which accessories enhance operator safety and ergonomics?
Ramps, roller conveyors and foot switches reduce manual lifting and handling, while protective hoods and rubber mats protect both operator and equipment during routine use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com