Ø90mm Sample Pan Aluminium, Pack of 80 - KERN
€45.00
Product information "Ø90mm Sample Pan Aluminium, Pack of 80 - KERN"
Aluminium sample pans with a Ø 90 mm diameter supplied as a pack of 80 combine lightweight durability and efficient stock handling for routine weighing tasks; order directly via Metav Werkzeuge or consult our specialists for compatibility advice.
KERN MLB-A01A – Aluminium sample pans, Ø 90 mm
A KERN MLB-A01A aluminium sample pan designed as a scales accessory for routine sample weighing and handling in laboratories and workshops
- Aluminium construction, corrosion-resistant
- Diameter Ø 90 mm for standard balances
- Supplied as pack of 80 pieces
Built for dependable weighing results
The aluminium construction provides a stable, low-mass tray that minimises thermal influence and helps maintain consistent readings on laboratory and industrial balances. The Ø 90 mm footprint matches common pan dimensions, ensuring reliable seating on most bench and precision balances without the need for adaptors. Aluminium is non-magnetic and has a naturally passive surface, which reduces interaction with many sample types; this supports precise mass determination and simplifies error sources during routine measurements.
Stock efficiency and handling for busy workflows
Supplied as a pack of 80, the pans reduce the frequency of reordering and simplify inventory management for production lines, quality departments and teaching labs. The total net weight is approximately 0.3 kg, which reflects the lightweight nature of the set and eases handling during restocking and storage. Bulk supply also supports hygienic practices: single-use or dedicated pans per batch prevent cross-contamination and save time otherwise spent on repeated cleaning cycles, increasing throughput in repetitive weighing operations.
Compatibility, maintenance and sustainability benefits
Designed as an accessory for balances, the pans are suitable for general sample collection and short-term storage before and after weighing. Aluminium pans are easy to clean with standard laboratory detergents and are recyclable at end of life, offering a pragmatic balance between operational convenience and environmental considerations. Originating from China under the KERN range, these pans provide a consistent specification that integrates well with established weighing procedures and lab workflows.
For reliable replenishment of KERN aluminium sample pans in packs of 80 and expert advice on compatibility with existing balances, contact Metav Werkzeuge in Emmerich to arrange supply and technical guidance.
Technical data
- Article number: MLB-A01A
- Manufacturer: KERN
- GTIN: 4045761179646
- Country of origin: CN
- Tariff code: 90160090
Core technical data
- Diameter: Ø 90 mm
- Net weight: 0.3 kg
- Pack quantity: 80 pieces
- ECLASS: 32040606
Materials & applications
- Material: Aluminium
- Category: Scales accessories
- Suitable for: sample weighing and handling
FAQ
Are these pans compatible with precision analytical balances? Yes. The KERN MLB-A01A aluminium pans are designed with a Ø 90 mm diameter to fit standard analytical and bench balances, providing stable seating and repeatable readings.
Can the pans be cleaned and reused? Yes. The aluminium construction allows cleaning with common laboratory detergents; depending on the application, the pans can be reused or treated as single-use to avoid cross-contamination.
What quantity is supplied per pack? The product is supplied as a pack of 80 pieces, which is useful for laboratories and workshops that require frequent replenishment.
Is the material suitable for reactive samples? Aluminium has a passive surface but may react with strongly alkaline or acidic reagents; for reactive samples, consider appropriate lining or an alternative pan material. The KERN MLB-A01A is suitable for routine, non-corrosive sample handling.
Where are these pans produced? These aluminium sample pans are manufactured in China and distributed under the KERN range.
Metav Werkzeuge, Emmerich am Rhein – info@metav-werkzeuge.com – +49 2822 7131930
Accessory Items
The combination of single‑cell weighing accuracy, 0.001 g readability and a halogen‑quartz 400 W drying system ensures fast, reproducible moisture results for sensitive samples; Order the KERN DBS 60-3 directly via Metav Werkzeuge or ask our consultants if needed. KERN DBS 60-3 Moisture Analyser — 60 g capacity, 0.001 g readability The KERN DBS 60-3 is a laboratory moisture analyser engineered for rapid, reliable moisture determination in low‑moisture specimens across plastics, pharmaceuticals and food‑related quality control. 60 g capacity, 0.001 g readability Single‑cell weighing system for high stability 400 W halogen‑quartz heater for controlled drying USB data output and 50 sample pans included Consistent accuracy for critical measurements The instrument’s 0.001 g readability and Single‑Cell weighing system deliver high repeatability and low noise, allowing small changes in mass to be detected with confidence. Linearity of ±0.003 g and reproducibility of 0.001 g mean the analyser produces comparable results across repeated runs, which is essential for process control and lab reporting. The compact 95 mm stainless steel pan and robust die‑cast aluminium housing contribute to a stable measurement environment, reducing drift and vibration effects. For applications that demand trace‑level sensitivity—such as polymer moisture profiling or pharmaceutical moisture limits—the analyser provides an objective basis for decisions and quality records. Fast, gentle drying tailored to delicate samples The device uses a halogen‑quartz 400 W heating element with active, programmable heating profiles to balance drying speed with sample integrity. Temperature control is optimised for temperature‑sensitive materials, limiting thermal damage while accelerating moisture removal. Ten programmable drying routines and memory for 100 stored processes simplify routine testing and ensure method repeatability across shifts. The graphic backlit display (15 mm digit height) shows current temperature, the active heating profile and the immediate moisture percentage, making each cycle traceable at a glance. The last measured value is held on screen until the next run overwrites it, supporting documentation without extra steps. Streamlined data handling and laboratory workflow Data transfer is handled via the USB interface, enabling export of weight and process records to a PC or printer for archiving and further analysis. A sample ID function stores up to 99 sample names, and integrated date/time stamping ensures that results are traceable. Password protection prevents unauthorised changes to settings and stored programmes, supporting regulatory compliance. Supplied accessories such as 50 sample pans and a draft shield reduce setup time and cross‑contamination risk. The analyser operates reliably within 5 °C–40 °C and up to 85% relative humidity, making it suitable for typical lab environments. Practical support and suitability for common industries The analyser is particularly suitable for low‑moisture applications in plastic technology, the pharmaceutical sector, food testing and R&D. An internal applications handbook is available in the download centre with examples, recommended settings and best practices to shorten the learning curve. For labs following USP guidance, note that the US Minimum Sample Weight concept should be applied when defining acceptable sample sizes. Built‑in power supply (220–240 V AC, 50 Hz) and a compact weight of 4.6 kg make the instrument simple to integrate on an existing bench. Contact Metav Werkzeuge today to discuss how the KERN DBS 60-3’s single‑cell accuracy and halogen drying technology can improve throughput and traceability in the laboratory; Metav Werkzeuge can advise on calibration options and suitable accessories Technical data Article number: DBS.60-3 Manufacturer: KERN GTIN: 4045761124226 Country of origin: PH Facts Weighing range: 60 g Readability: 0.001 g Linearity: ±0.003 g Reproducibility: 0.001 g Weighing pan diameter: 95 mm Display digit height: 15 mm Power supply: 220 V–240 V AC, 50 Hz Heater power: 400 W (halogen‑quartz) Operating temperature: 5 °C–40 °C Max ambient humidity: 85% Weight: 4.6 kg Special features Single‑cell weighing system Backlit graphic display 10 programmable drying programmes Memory for 100 drying processes Last value hold until overwritten Password protection for settings Sample ID for up to 99 samples Date and time display USB interface for data transfer 50 sample pans included Draft shield supplied Housing: die‑cast aluminium Weighing pan: stainless steel Built‑in power supply Applications handbook available in download centre FAQ What is the smallest change in mass the analyser can detect? The KERN DBS 60-3 detects changes down to 0.001 g; this level of sensitivity supports reliable moisture determination for low‑moisture samples. Which materials can be analysed with this moisture analyser? The device is suitable for materials such as plastics, pharmaceutical samples, many food matrices and other low‑moisture specimens; the instrument’s controlled heating is designed to protect temperature‑sensitive samples. How are drying methods and programmes managed? Up to 10 drying programmes can be stored and the unit retains records for 100 processes, allowing standardised methods to be applied and repeated without reconfiguration. Can measurement data be exported for documentation? Yes; the DBS 60-3 includes a USB interface for transferring weight and process data to a PC or printer for archiving and further evaluation. Is the instrument protected against unauthorised changes? Password protection is available to secure stored settings, programmes and measurement parameters on the analyser. Metav Werkzeuge — Emmerich am Rhein, Germany · Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271
Technical Data and Detail Information for KERN Moisture analyser :Manufacturer: KERNSeries: DABModel: Moisture analyserMaterial: Wägeplatten aus AluminiumReadout: 0,001 g - 0,01 gOrder your new Moisture analyser now Online!
Take advantage of the combination of high-precision readability (0.001 g), a 400 W halogen-quartz heater and intuitive guided operation for reliable, repeatable moisture results; order the analyser directly via Metav Werkzeuge or consult our specialists for application advice. KERN DLB 160-3A Moisture Analyser — 160 g range, 0.001 g readability The KERN DLB 160-3A is a laboratory moisture analyser designed for fast, traceable moisture determination in food production, environmental testing and R&D settings. High-precision readability 0.001 g Weighing capacity 160 g 400 W halogen-quartz heater Intuitive graphic LCD, 6-language guidance Reliable moisture results with laboratory accuracy The analyser delivers repeatable results thanks to a readability of 0.001 g and a linearity of ±0.003 g, which reduces uncertainty for routine analysis. The strain gauge weighing system and stainless weighing pan guarantee stable readings during drying cycles, while the minimum sample weight of 0.02 g indicates suitability for small samples. These technical characteristics translate into fewer repeats and consistent process control when moisture content is a critical parameter. Faster workflows through guided operation and clear output An illuminated graphic LCD with 11 mm digit height and six direct keys offers a guided, step‑by‑step operator menu in six languages, reducing user error and training time. The oven unit uses a 400 W halogen‑quartz heater that reaches the selected drying profile rapidly, shortening cycle times. Integrated GLP functionality records weight values, device ID and user data for documented traceability, supporting regulatory and audit requirements. Built for safety and everyday use in busy facilities The housing combines a plastic enclosure with a stainless steel weighing plate, making the instrument easy to clean while resisting routine laboratory wear. Ten sample pans and a supplied safety hood are included for immediate use and operator protection. Automatic taring when the lid closes and the option to pause or cancel a drying cycle improve operational safety and sample handling flexibility. Practical connectivity, power and application support A built‑in power supply accepts 220–240 V AC at 50/60 Hz for plug-and-play installation. The instrument retains the last measurement on screen until a new analysis is started, avoiding accidental data loss. An application handbook is available via the download centre with examples and settings for sectors such as the food industry, water management and agricultural laboratories, helping to adapt drying programmes and interpretation without lengthy trial-and-error. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN DLB 160-3A into production or testing workflows; reach out by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for procurement and technical guidance Technical data Article number: TDLG-A SKU: DLB.160-3A GTIN: 4045761133952 Manufacturer: KERN Country of origin: CN Core data Readability: 0.001 g Weighing capacity: 160 g Minimum sample weight: 0.02 g Linearity: ± 0.003 g Reproducibility: 0.001 g Weighing pan diameter: 100 mm Display digit height: 11 mm Heater power: 400 W Drying temperature range: 35 °C–160 °C Operating humidity (max): 75% Net weight: 4.7 kg Power supply: 220 V–240 V AC, 50 Hz / 60 Hz Weighing system: Strain gauge Special features Graphic LCD display Six direct function keys Operator guidance in 6 languages (DE, EN, FR, IT, ES, PT) Automatic taring on lid close GLP internal reporting and print capability Ten sample pans included Safety hood included Housing: plastic; weighing plate: stainless steel Application handbook available in download centre Suitable application areas: food industry, environmental analysis, R&D, agriculture, water management FAQ How precise are the moisture determinations with this instrument? The KERN DLB 160-3A achieves a readability of 0.001 g and a linearity of ±0.003 g, delivering laboratory-grade precision suitable for routine moisture analysis. What temperature range can be used for drying? Drying profiles for the analyser cover 35 °C–160 °C, enabling a wide range of sample types and methods to be applied for reproducible moisture loss. Is traceable documentation available for audits? Yes. The device provides GLP‑ready internal reporting, printing Waagen‑ID, project and user IDs together with measured values for full traceability. Which materials and sample sizes are appropriate? The instrument is equipped with a 100 mm stainless steel pan and supports minimum sample weights from 0.02 g, making it suitable for small sample testing in food, environmental and research labs. What is included with delivery for immediate use? Included are ten sample pans and a safety hood; the analyser also has a built‑in power supply and comes with access to an application handbook in the download centre. Manufacturer: KERN — Origin: CN — Dealer contact: Metav Werkzeuge, Emmerich; info@metav-werkzeuge.com; +49 2822 7131930