How else is a Messschieber called?

Take advantage of the combination of long-range measurement capability, a rigid monoblock construction and fine vernier control for dependable workshop dimensioning; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.351 — 1,250 mm monoblock caliper, hardened stainless steel The Workshop Caliper M201.351 is a long-range, monoblock analogue caliper engineered for large workshop and fixture measurements, combining robust construction with precise vernier reading for reliable, repeatable checks. *Monoblock design for high rigidity *1,250 mm measuring range for long parts *Stainless hardened construction with matt chrome scale *Fine adjustment and 0.05 mm vernier resolution Built for long-span workshop measurements with minimal flex The instrument is designed as a monoblock caliper with a cross-section of 31 x 10 mm, which increases profile stiffness across its full length and reduces deflection when measuring long or heavy components. Classified in the Long range (1,000–2,000 mm), the 1,250 mm measuring span suits large assemblies, fixtures and profiles where single‑pass checks improve throughput. The substantial jaw geometry and monoblock beam support reproducible positioning, making this tool a practical choice for heavy‑duty workshop measurement tasks. Analogue precision that meets workshop standards This analogue instrument employs vernier scales (1/128" on the top scale and 1/20 mm on the bottom scale) to provide a readable resolution of 0.05 mm, matching industrial expectations for mechanical calipers. With a jaw length of 200 mm, the measuring faces and vernier comply with DIN 862, ensuring measurement behaviour conforms to recognised workshop standards. The integrated fine adjustment mechanism enables controlled closing of the jaws for repeatable readings, while the matt‑chromed scale reduces glare and facilitates accurate visual interpretation. Durable materials, ergonomic handling and safe transport Constructed from stainless steel that has been hardened, the caliper is finished with a matt chrome graduation for long term legibility and resistance to workshop wear. The 200 mm jaw length balances reach and handling: long enough for many workpieces yet short enough to remain manageable for single‑person use. Delivery in a transport case provides protection during storage and transit, and the robust beam profile supports frequent daily use in metalworking environments. Routine care—light lubrication of the slide and clean storage in the supplied case—preserves measurement integrity. Contact Metav Werkzeuge to discuss integrating the M201.351 monoblock long-range caliper into your inspection routine or to request delivery and technical details from our Emmerich warehouse Technical Data Article number: M201.351 GTIN: 4054469182315 Brand: Metav IndustryLine Facts Measuring range: 0–1,250 mm Jaw length: 200 mm Cross-section: 31 x 10 mm Resolution: 0.05 mm Vernier scales: 1/128" (top), 1/20 mm (bottom) Applicable standard: DIN 862 (jaw length 200 mm) Special features Monoblock beam for increased rigidity Fine adjustment for controlled measurement Material: hardened stainless steel, matt‑chrome scale Supplied in a transport case for safe handling Analogue (vernier) configuration FAQ How accurate is the Workshop Caliper M201.351 for routine inspection tasks? The Workshop Caliper M201.351 provides a vernier resolution of 0.05 mm and, with its DIN 862 conformity at the 200 mm jaw length, is suited to standard workshop accuracy requirements and repetitive dimensional checks. Which measurement tasks can be performed with this caliper? This analogue caliper performs external, internal and step measurements using the jaw faces and stepped surfaces; the fine adjustment aids precise closure for repeatable external readings. Is the M201.351 suitable for heavy workshop environments? Yes. The monoblock construction and hardened stainless steel beam are designed to withstand daily use in metalworking shops and fixture assembly areas while maintaining dimensional stability over long spans. Does the caliper come with a calibration certificate? The product data do not indicate an ISO 17025 calibration; please contact Metav Werkzeuge if a traceable calibration certificate is required for the Workshop Caliper M201.351. What protective measures are included for transport and storage? The caliper is supplied in a transport case to protect the beam and jaws during handling and storage; regular cleaning and light lubrication are recommended to maintain the scale and sliding surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of long-range reach, low-deflection carbon fibre construction and robust IP65 protection for reproducible measurements on large components; order the Digital Uni. Caliper M217.362 directly via Metav Werkzeuge or ask our consultants if needed. Digital Universal Caliper M217.362 — 1,500 mm carbon fibre, IP65 The Digital Universal Caliper M217.362 is a long-range, inductive workshop caliper designed for reliable measurements of large assemblies and tooling up to 1,500 mm. Carbon fibre 1,500 mm beam for low deflection IP65 dust- and splash-resistant design Inductive measuring system with RB6 data output Removable jaw and spring-loaded thumbwheel Reproducible measurements across long spans This long-range instrument is engineered for measurements up to 1,500 mm, placing it in the Long category for calipers. The inductive measuring system provides stable sensing along the entire beam, reducing the influence of contamination that affects mechanical readers. With a display resolution of 0.01 mm, operators gain clear, comparable values for external and internal dimensions on large components; this supports process consistency in fixtures, housings and large assemblies where repeatability matters. Lightweight stiffness and workshop resilience The beam is manufactured from carbon fibre, which combines low mass with high stiffness to limit sag over the full measuring length. Together with the IP65 rating, this construction means the instrument tolerates workshop environments while remaining easy to handle during two-person measurements or when mounted on supports. A removable jaw allows replacement or specialised jaw types, and the spring-loaded thumbwheel ensures gentle, consistent closing force to cut measurement variation caused by operator pressure. Clear results and industrial connectivity The caliper’s digital display supports mm/inch, Hold, Set, On/Off, 0/Inch and Data functions for versatile use; the 0.01 mm step size ensures readable resolution for workshop quality checks. Data are made available via RB6 output for direct logging into inspection systems or data collectors, while power is supplied by a 3 V CR 2032 cell for long service life between battery changes. Delivered in a transport case, the instrument is protected during storage and transfer, simplifying workshop logistics. Choose Metav IndustryLine’s carbon-fibre long caliper for consistent, low-deflection measurements over large parts — contact Metav Werkzeuge in Emmerich for personalised advice or to request a quote. Technical data Article number: M217.362 GTIN: 4054469183220 ECLASS: 21170344 Facts Measuring range: 0–1,500 mm Resolution (display): 0.01 mm Accuracy: 0.11 mm Jaw length: 100 mm Power supply: 3 V CR 2032 Special features Material: carbon fibre beam Protection: IP65 Measuring system: inductive Data output: RB6 Display functions: mm/inch, Hold, Set, On/Off, 0/Inch, Data Removable measuring jaw Spring-loaded thumbwheel Delivered in transport case FAQ What measuring range does the caliper cover? The Digital Universal Caliper M217.362 covers 0–1,500 mm and is classified as a long-range caliper suitable for large components and tooling. Is the instrument suitable for workshop use and humid environments? Yes — the carbon fibre beam combined with an IP65 rating provides resistance to dust and splashes, making it appropriate for standard workshop conditions. How can measurement data be transferred to a PC or logger? Data are exported via the RB6 output; the caliper uses an inductive measuring system that supports reliable digital transfer to compatible data collectors. Which display functions are provided for everyday measuring tasks? The instrument includes mm/inch switching, Hold, Set, On/Off, 0/Inch and Data buttons for flexible operation, with a display resolution of 0.01 mm; it is powered by a 3 V CR 2032 battery. Can the measuring jaw be replaced or adapted for special tasks? Yes, the product features a removable measuring jaw and a spring-loaded thumbwheel to enable jaw replacement and to ensure consistent contact force during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of clear large-digit readout, fibreglass lightness, and workshop‑grade 150 mm range for efficient, repeatable checks on everyday components; order directly via Metav Werkzeuge or consult the specialists for application advice. Digital caliper M216.073 by Metav IndustryLine — 150 mm, fibreglass, 0.1 mm resolution Digital caliper M216.073 offers a compact, easy-to-read measuring solution for routine workshop tasks and quality checks across general metalworking and maintenance applications. Fibreglass body, corrosion resistant 150 mm measuring range 0.1 mm digital resolution Large 16 mm high-contrast digits Clear legibility for fast inspection and fewer errors The instrument features a large 16 mm digit height on the display, which significantly reduces reading time in busy production or maintenance environments. Combined with a straightforward digital interface — including ON/OFF, ZERO and mm/inch functions — the device streamlines routine dimension checks. The 0.1 mm resolution positions this caliper for standard workshop accuracy, making it suitable for general machining and assembly tasks where rapid, unambiguous readings are more important than micrometre-level precision. This balance of readability and sufficient accuracy supports quicker decision‑making on the shop floor and reduces the risk of rework caused by misreading small displays. Lightweight fibreglass design that withstands daily use Constructed from fibreglass, the gauge remains exceptionally light (approx. 0.1 kg) while offering good resistance to corrosion and everyday knocks. The material choice lowers operator fatigue during repetitive measuring routines and enables safe use in environments where metal calipers could mark soft surfaces. The instrument’s 150 mm range places it in the standard caliper category, which is the most versatile size for workshops: it combines reach, stiffness and single‑hand handling for measurements on shafts, housings and interfaces commonly encountered in production and repair work. The compact form factor and blister packaging facilitate tidy storage and straightforward distribution within tools cupboards. Practical controls and ergonomic handling to increase throughput Ergonomic jaw geometry with a beak length of 40 mm provides stable contact for external and internal measurements, while the simple digital control scheme reduces training time for new operators. The lightweight slider and intuitive button layout enable swift zeroing and unit changes, improving throughput during repetitive inspection cycles. The caliper is supplied with basic workshop calibration and is targeted at organisations seeking reliable, low‑maintenance tools for standard quality control tasks. Integration into daily workflows is straightforward, and the device complements a broader toolset from Metav IndustryLine for centralised procurement and consistent performance across the shop. For straightforward, readable workshop measurement from Metav IndustryLine, order the M216.073 through Metav Werkzeuge or request tailored application advice by phone or e‑mail — Metav’s specialists in Emmerich are ready to assist. Technical Data Article number: M216.073 GTIN: 4054469182834 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.1 mm Digit height: 16 mm Weight: 0.1 kg Beak length: 40 mm Voltage: 3 V Special features Material: fibreglass Display: ON/OFF, ZERO, mm/inch Packaging: blister pack Suitable category: Standard caliper (100–300 mm range) SKU: M216.073 FAQ Is this caliper suitable for precision workshop checks? The Digital caliper M216.073 delivers 0.1 mm resolution and a 150 mm range, which suits standard workshop and assembly inspections where rapid, reliable readings are required rather than sub‑micrometre measurement. What materials is the caliper designed to cope with? The fibreglass construction of the M216.073 is corrosion resistant and robust for everyday handling; it is appropriate for general metalworking and maintenance tasks but is not intended as a replacement for metrology‑grade instruments on high‑precision materials. Does the display offer both metric and imperial units? Yes, the instrument provides mm/inch conversion via the dedicated display button to support mixed workflows and simplify documentation across projects. Is a calibration certificate included? The tool is supplied with standard workshop calibration suitable for routine quality control. If a higher level of traceable certification is required, Metav Werkzeuge can advise on appropriate calibrated solutions. What power source does the caliper use and how long does it last? The caliper operates from a 3 V cell. Actual service life depends on usage patterns and switch‑off behaviour; the ON/OFF control is provided to preserve battery life during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact mounting profile that combines 150 mm length, a 16×2.5 cross‑section and exceptionally low weight for stable, repeatable angle measurement; order directly via Metav Werkzeuge or ask our consultants for integration advice. 150 mm rail for TOP universal angle measuring instrument — 16×2.5 cross‑section, Metav IndustryLine The 150 mm rail for TOP universal angle measuring instrument is a compact mounting profile designed to deliver a rigid reference for precision angle measurements in workshop and laboratory metrology. Compact 150 mm precision profile Robust 16×2.5 cross‑section Lightweight 0.1 kg mounting rail Metav IndustryLine manufacturing quality Stable reference for repeatable angle measurement The short, stiff profile creates a dependable datum for measuring angles with high repeatability. With a 150 mm nominal length and a 16×2.5 cross‑section, the profile limits bending and torsion that otherwise introduce measurement scatter; this is particularly beneficial where consistent alignment is required across multiple setups. The geometry serves as a fixed mounting surface for the TOP universal angle device, turning a measuring head into a reproducible inspection station and helping to keep process tolerances tight. Easy retrofit and predictable handling in the workshop The rail’s compact dimensions and low weight (around 0.1 kg) simplify installation and handling on measurement benches, fixtures or portable test rigs. The cross‑section specification denotes the profile width and wall thickness, which together determine stiffness and mounting clearance; these parameters make the component straightforward to fit where space is limited. Delivered without additional packaging, the part is intended for direct assembly into existing systems or for integration into jigs where immediate use is required. Industrial reliability and traceable identification Produced under the Metav IndustryLine label, the rail reflects consistent production standards for workshop metrology parts. Clear identification with GTIN and SKU supports inventory control and traceability in procurement processes, while the compact construction reduces storage footprint and simplifies logistic handling. Where a rigid, short reference is needed for repetitive angle checks, this mounting profile offers a pragmatic combination of stiffness and portability that supports efficient inspection routines. For matching parts, technical advice or to procure the Metav IndustryLine 150 mm rail, contact Metav Werkzeuge in Emmerich — our specialists will recommend the correct mounting solution and supply options. Technical data SKU: M214.098.1 GTIN: 4061905053641 Description: 150 mm rail for TOP universal angle measuring instrument (without packaging) Brand: Metav IndustryLine Facts Length: 150 mm Cross‑section: 16×2.5 mm Weight: 0.1 kg Special features No packaging (delivered unpacked) Compatible with TOP universal angle measuring instruments Compact, stiff profile for repeatable setups FAQ What is the intended use of this rail? The rail serves as a compact mounting and reference profile for angle measurement systems; it is designed to accept the TOP universal angle measuring instrument and to provide a stable datum for repeatable measurements. Is the rail supplied ready for installation? Yes, the Metav IndustryLine 150 mm rail is delivered without packaging and is intended for immediate integration into fixtures or measurement benches. What do the dimensions 16×2.5 indicate? The specification denotes the profile’s width and wall thickness (in millimetres); it is a key factor in the rail’s stiffness and suitability for supporting an angle measuring head. Can this rail be used in a portable inspection setup? Its compact length and 0.1 kg weight make the profile suitable for portable or bench‑mounted inspection rigs where a rigid, short reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the carbide tip and compact 33 mm length to restore precise scribing performance with minimal downtime; the light 1 g replacement combines durability and easy fitment for efficient workshop replenishment — order directly from Metav Werkzeuge or contact our consultants for compatibility guidance. Replacement scribing needle, Ø 2 mm – Carbide tip, 33 mm length (Metav IndustryLine) Replacement scribing needle, Ø 2 mm – Carbide tip, 33 mm length is a precision accessory for scribing calipers, designed to restore crisp marking capability on component surfaces prior to machining. Carbide scribing tip Ø 2 mm 33 mm hardened precision length Suitable for standard scribing calipers Lightweight 1 g replacement part Engineered for consistent, high-contrast marks The replacement scribing needle is built around a carbide tip with a nominal Ø 2 mm diameter and a 33 mm overall length, offering a predictable contact geometry for repeatable scribing. Carbide provides a high hardness-to-toughness ratio, which means the tip keeps a clean edge under regular workshop use and wears significantly slower than simple tool steels. This reliable tip material translates into fewer interruptions for tool changes and a consistent line width that improves downstream machining and inspection readability. Fits routine maintenance cycles and reduces downtime As a direct spare part for scribing calipers, the needle is a fast-change solution that restores measuring and marking capability without the need for tool recalibration in most cases. The component’s negligible mass (approximately 1 g) preserves the balance of the parent instrument and avoids altering handling characteristics during one-handed operation. Supplied as a compact replacement item, it supports straightforward stock management in small to medium workshops and production cells, helping to keep the production flow continuous and predictable. Robustness for workshop environments and broad marking tasks The carbide construction ensures resistance to abrasive wear, making the needle suitable for repeated marking of ferrous and non-ferrous component surfaces encountered in preparatory layout work. While intended for scribing and layout prior to machining, the durable tip tolerates normal workshop contaminants and handling better than softer alternatives. Where longevity matters, the hardened construction reduces the frequency of replacements and supports a cost-conscious maintenance strategy aligned with Metav’s emphasis on accessible precision. For rapid replenishment and assured precision, request the Metav IndustryLine replacement needle M201.155 from Metav Werkzeuge — contact via info@metav-werkzeuge.com or +49 2822 7131930 to confirm fitment and delivery options Technical Data Article number: M201.155 GTIN: 4061905053597 Weight: 0.001 kg (1 g) Material: Carbide Item label: Replacement scribing needle, Ø 2 mm, L 33 mm Facts Diameter: 2 mm Length: 33 mm Mass: 0.001 kg Special features Carbide tip for improved wear resistance Designed as a direct replacement accessory Compact, lightweight design FAQ What is the M201.155 intended for? The M201.155 replacement scribing needle is intended as a spare scribing tip for scribing calipers, restoring precise layout marking capability on component surfaces prior to machining. Which materials can be marked with this carbide needle? Because the needle is made of carbide, the M201.155 is suited to scribing most common workshop component surfaces used for layout work; it is optimised for durable, repeatable marks rather than cutting or heavy abrasion. How long does the replacement needle typically last? Service life depends on use and workpiece abrasiveness; the carbide construction of the M201.155 provides significantly higher wear resistance than softer tips, reducing replacement frequency under normal layout and marking conditions. Is installation of the replacement needle difficult? Installation is designed to be straightforward: remove the worn tip from the scribing caliper and fit the M201.155 in its place, ensuring secure seating. The low mass of the needle preserves handling characteristics of the caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of workshop-grade robustness, reliable data transfer and fine mechanical precision for consistent measurement results. The 200 mm measuring range, accuracy ±0.02 mm and IP54 protection make this caliper suitable for standard machine‑shop tasks; order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper M216.256 — 200 mm absolute caliper with IP54 by Metav IndustryLine The Digital Caliper M216.256 is a 200 mm absolute digital caliper to DIN 862, designed for routine workshop and production measurements where repeatable precision and data output are required. Absolute measuring system with RB 6 data output IP54 protection for dusty and damp environments Four‑function measurement: internal/external/depth/step Stainless steel construction with glass scale Reliable precision for everyday workshop control The caliper delivers accuracy ±0.02 mm with a 0.02 mm reading, a combination that meets typical industrial quality‑control requirements for general mechanical engineering. With a 200 mm measuring range, the instrument falls into the Standard class, offering the best balance between reach and stiffness for routine workpieces such as shafts, housings and fixtures. The specification to DIN 862 provides a trustworthy reference for conformity and comparability in procurement decisions, while the absolute measuring principle avoids the need for repeated reference runs, reducing cycle time during serial checks. Built to withstand workshop conditions and integrate with production data Robustness is a core benefit: an IP54 rating and stainless steel with glass scale construction resist dust and splash exposure common in machining environments, so measurement remains dependable across shifts. The caliper uses an absolute measuring system, which keeps the reference position even after the instrument is powered down, and features data output RB 6 for direct connection to data loggers or statistical process control systems. The digital display includes ON/OFF, 0/ABS, mm/inch and Origin functions for straightforward operation, and a 3 V CR2032 battery powers the unit with a compact supply solution. Versatile handling that speeds up inspection workflows Ergonomic design and manageable mass (approx. 0.5 kg) permit steady one‑handed operation and precise jaw positioning. The device supports four‑function measurement — internal, external, depth and step — allowing a single tool to replace several specialised gauges and thus streamline bench setups. The caliper is operable with or without a drive roller, enhancing adaptability for different measurement techniques. Where traceability and digital logging matter, the integrated output simplifies data capture and reduces transcription errors, supporting lean workflows on the shop floor. Choose the Metav IndustryLine digital caliper M216.256 for robust, workshop-ready measurement and contact Metav Werkzeuge for expert advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M216.256 GTIN: 4054469182568 Label: Digital caliper 200 mm, IP54, DIN 862 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–200 mm Reading / resolution: 0.02 mm Accuracy: ±0.02 mm Weight: 0.5 kg Battery: 3 V CR2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: absolute Digital display: ON/OFF, 0/ABS, mm/inch, Origin Data output: RB 6 Four‑function measurement: internal, external, depth, step Norm: DIN 862 Operable with or without drive roller FAQ What measurement tasks is this caliper best suited for? This caliper is intended for standard workshop and machine‑shop measurements; the Digital Caliper M216.256 (Metav IndustryLine) covers typical tasks on shafts, housings and assembly parts within its 200 mm range. How does the absolute measuring system help in inspection routines? The absolute measuring system maintains the reference position after power‑off, so the M216.256 avoids repeated zeroing and speeds up serial checks while reducing operator steps. Can measurement results be exported to a PC or data logger? Yes. The caliper provides a data output RB 6 interface that allows direct connection for digital logging and integration into SPC or measurement collection systems. Which measurement functions are supported by the instrument? The tool supports four modes: internal, external, depth and step measurement; these functions make the caliper a versatile choice for diverse inspection needs. Is the caliper suitable for use in a production environment with dust and coolant mist? The IP54 rating and durable stainless steel with glass scale make the Digital Caliper M216.256 suitable for dusty and splash‑prone workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of robust IP67 protection, an inductive measuring system and a 0.01 mm display resolution delivers dependable depth measurement for everyday workshop control; benefit from fast, repeatable readings and corrosion‑resistant construction. Order via Metav Werkzeuge or contact our consultants for specification advice and prompt supply. Digital depth gauge M218.122.D — 0–300 mm range, IP67 protection Digital depth gauge M218.122.D provides precise depth measurement for machine shops and quality control, designed as a rugged industrial instrument for standard workshop tasks IP67 protection against dust and water immersion Inductive measuring system for long service life 0.01 mm display resolution for fine control Hardened stainless steel construction Complies with DIN 862 for workshop metrology Precise readings that fit the workshop routine The instrument is built around an inductive measuring system and a standard 0–300 mm range, classifying it as a workshop‑standard depth gauge that balances reach and stiffness. With a display resolution of 0.01 mm, the device supports repeatable checks in production and incoming‑goods inspection; the numeric step size is explained on the display and allows operators to distinguish between tolerances comfortably. Compliance with DIN 862 ensures the unit meets recognised dimensional metrology requirements, so results integrate easily into existing QC procedures. Durable construction for harsh working environments A hardened stainless steel body and an IP67 rating protect the instrument from coolant, chips and dust, reducing measurement downtime and prolonging service life. The digital readout runs from a replaceable 3 V CR 2032 battery and the control panel offers MODE, INC, HOLD and 0/ON keys for straightforward handling during repetitive tasks. At approximately 0.6 kg, the gauge is substantial enough to feel stable while remaining portable for bench or on‑machine checks. Simple operation, tailored to industrial use The depth gauge is supplied without data output, which suits inspection stations that record values manually or with stand‑alone documentation procedures. The inductive sensor reduces sliding contact wear compared with mechanical racks, maintaining accuracy over prolonged use. As a Standard class instrument, it is particularly well suited to general metalworking, fixture checks and routine quality control where robust, quick depth measurements are required without the complexity of automatic data transmission. Contact Metav Werkzeuge for specialist advice on integrating the M218.122.D into your workshop workflow and to arrange supply from our Emmerich warehouse Technical data Article number: M218.122.D GTIN: 4054469182957 Label: Digital-Tiefenmaß 300 x 150 mm, IP67 Ohne Datenausgang Brand: Metav IndustryLine Facts Measurement range: 0–300 mm Resolution: 0.01 mm Protection rating: IP67 Weight: 0.6 kg Battery: 3 V CR 2032 Bridge: 150 mm Measuring system: inductive Compliance: DIN 862 Special features Hardened stainless steel construction Digital display with MODE, INC, HOLD, 0/ON buttons No data output (without interface) Robust sensor technology for extended service life FAQ How accurate is the measurement on this digital depth gauge? The device provides a display resolution of 0.01 mm and conforms to DIN 862, offering accuracy and repeatability suitable for routine workshop inspection with clear numeric feedback. Is the gauge suitable for use on a busy shop floor? Yes. The IP67 rating and hardened stainless steel construction make the unit resistant to dust and coolant exposure, so it is appropriate for machine‑shop environments. Can measurement data be exported to a computer or SPC system? This model is supplied without data output, so readings are intended for manual recording or integration into non‑automated inspection processes. What battery does the instrument use and is it easy to replace? The gauge uses a standard 3 V CR 2032 coin cell, which is easily replaced in the field to minimise downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a carbide contact and precise dimensions to restore measuring reliability for medium-range calipers; the spare tip reduces wear-related variation and keeps inspection cycles stable. Order the component directly via Metav Werkzeuge or contact the consultants for fitment advice. Replacement tip for rod-compass caliper up to 500 mm, carbide, 60 mm, Ø 8 mm (Metav IndustryLine) Replacement tip for rod-compass caliper up to 500 mm, carbide, 60 mm, Ø 8 mm offers a hard-wearing contact solution for workshop and toolroom metrology, designed to fit specified Metav caliper models Carbide tip for long wear resistance 60 mm length with Ø 8 mm shank Compatible with M201.173/174 calipers Durability that maintains measurement stability The carbide tip provides high hardness and excellent wear resistance, which reduces contact deformation during frequent measurements. This leads to improved repeatability and fewer recalibrations compared with softer contact points. A single, robust contact piece lengthens service intervals and supports consistent inspection processes in production and quality control, ensuring measured values remain reproducible across repeated checks. Fast replacement to reduce downtime Designed with a 60 mm working length and an Ø 8 mm shank, the tip slips into the holder with a secure fit and minimal adjustment. Compatibility with M201.173/174 calipers streamlines maintenance procedures and shortens setup time for routine swaps. The direct replacement format eases inventory planning for spares and supports uninterrupted measuring capability, which helps maintain throughput in busy workshops. Suitable for medium‑range measuring tasks in the workshop Classified for medium-range calipers (up to 500 mm), this spare tip is intended for applications where reach and stiffness need to be balanced, such as measuring fixtures, housings and medium-sized components. The hardened contact surface resists abrasion from repeated edge contact and preserves the caliper’s original measuring characteristics. Metav’s supply of this component reflects a practical approach to keeping metrology tools serviceable and dependable in everyday industrial use. Contact Metav Werkzeuge today to confirm compatibility for M201.173/174, secure the correct replacement tip and maintain uninterrupted measuring performance — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M201.173.2 GTIN: 4061905053603 Manufacturer: Metav IndustryLine Facts Length: 60 mm Shank diameter: Ø 8 mm Weight: 0.02 kg Special features Material: Carbide (Hartmetall) Compatible with: M201.173/174 calipers Suitable for: Medium-range calipers (up to 500 mm) FAQ Is this tip compatible with other caliper models besides M201.173/174? Compatibility is specified for M201.173/174; adaptations for other models may require verification of shank diameter and holder design before use with the replacement tip. What advantages does the carbide contact bring for workshop use? The carbide contact offers superior wear resistance and dimensional stability, which helps the caliper maintain repeatable readings under frequent use and reduces the need for early replacement. How simple is the installation of the replacement tip? Installation is straightforward: the Ø 8 mm shank is intended to fit the corresponding holder on the specified calipers and allows quick replacement to minimise downtime. Can this tip be used for precision laboratory work? While robust and wear‑resistant, the tip is primarily aimed at workshop and toolroom metrology for medium‑range measurements rather than ultra‑high-precision laboratory applications. Will replacing the tip affect calibration of the caliper? A correctly fitted, manufactured replacement tip preserves the original contact geometry; calibration status should be checked after replacement as part of normal quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com