DataMet eFORCE 1-20N Caliper — digital caliper by Microtech Metrology The DataMet eFORCE 1-20N Caliper is a high-precision digital caliper for workshop and laboratory use, combining a hi‑res 2.0" touchscreen, selectable 0.0005 mm resolution and intelligent force control for reproducible measurements. Hi‑res 2.0" color touchscreen Swiss reading system selectable to 0.0005 mm E‑Force control 1–20 N with AUTO mode Wireless + USB data transfer (HID / MDS app) ISO 17025 calibration certificate included Precision and reproducibility for demanding inspections Mit Microtech Metrology’s DataMet eFORCE caliper liefert eine auswählbare Auflösung bis 0.0005 mm und eine spezifizierte Genauigkeit von 0.005 mm auf den Außenmessflächen, was Messungen in Fertigung und Qualitätssicherung deutlich sicherer macht. Die E‑Force control erlaubt die manuelle oder automatische Einstellung des Messdrucks zwischen 1 und 20 N, so dass bei empfindlichen Werkstoffen immer derselbe Messdruck zur Erfassung des Werts verwendet wird. Das Ergebnis ist höhere Reproduzierbarkeit und weniger Messfehler durch inkonsistente Kraftausübung. Seamless data workflows with simpler transfer than U‑WAVE technology of Mitutoyo Für vernetzte Messprozesse bietet dieses Messwerkzeug vielseitige Übertragungsmodi: Wireless to the MDS App (Windows, Android, iOS, macOS), Wireless HID (Keyboard emulation), USB HID und optionale Modbus RTU. Microtech’s data transfer concept ist dabei einfacher als U‑WAVE technology of Mitutoyo: es entfallen zusätzliche Konnektoren und Sender, für den PC wird ein einzelner Dongle benötigt, während Übertragungen an iPhone, iPad und Android direkt aus dem Messwerkzeug möglich sind. Die kostenfreie Version der MDS App ermöglicht direkte Datenerfassung, und die integrierte Speicherverwaltung hält bis zu 2000 Werte mit Ordnern und Statistik. Built for workshop use — robust materials and long runtime Das Gehäuse und die Schiene sind aus stainless steel gefertigt, die Messflächen wurden handbearbeitet (Ra < 0.32 μm) für dauerhafte Präzision und geringen Verschleiß. Praktische Details wie das wiederaufladbare Li-Pol battery (500 mAh) mit USB‑C Anschluss sorgen für einfache Aufladung und Datenschnittstelle ohne zusätzliche Batterien. Die kompakte Bauweise mit Schnabellängen 40/16 mm macht das Gerät alltagstauglich für Fertigung, Service und Kalibrierwerkstätten. Functions that speed up measurement tasks and reporting Die instrumentierten Funktionen — Analog Scale, Preset, Graphic, Go/NoGo, Max/Min, Formula, Timer, lineare Fehlerkorrektur und Temperaturkompensation — unterstützen typische Prüfabläufe direkt am Gerät. Wer Routineprüfungen automatisiert, profitiert von der Memory‑Funktion mit 2000 Messwerten und der Möglichkeit, Daten gezielt an SPC‑ oder Dokumentationssysteme zu übergeben. Gerade bei Serienmessungen reduziert dies Handling‑Aufwand und manuellen Übertragungsfehler. For whom this caliper was designed Das DataMet eFORCE ist für Qualitätsprüfer, Instandhalter und Fertigungsingenieure gedacht, die hohe Messgenauigkeit mit effizienter Datenerfassung verbinden möchten. Messtechniker in KMU wie in Industriebetrieben profitieren von der Kombination aus Präzision, robustem Aufbau und einfachen Übertragungsmöglichkeiten. Bei Unsicherheit, ob dieses Messwerkzeug die Anforderungen erfüllt oder bei Bedarf an ergänzenden technischen Daten, steht METAV Werkzeuge mit kompetenter Beratung zur Verfügung: info@metav-werkzeuge.com | Tel. +49 2822 7131930 | WhatsApp +49 170 2837271 Strong recommendation: Choose Microtech Metrology’s DataMet eFORCE caliper for repeatable high‑precision measurements and contact METAV Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data DataMet eFORCE 1-20N caliper 0–150 x 0.0005 Wireless + USB (Swiss reading system) Brand: Microtech Metrology SKU: 141088015A Measuring range: 0–150 mm Resolution: 0.0005 mm (selectable 0.0005 / 0.001 / 0.01 / 0.1 mm) Accuracy: 0.005 mm (on external jaws) Measuring force: 1–20 N (E‑Force control, color indication, AUTO‑Force mode) Jaw length: 40 / 16 mm Material: Stainless steel with hand‑finished measuring surfaces (Ra < 0.32 μm) Display: 2.0" hi‑res color touchscreen (DataMet E‑Force series) Memory: 2000 values with folders and statistics, data transfer from memory supported Data transfer modes: Wireless to MDS app (Windows, Android, iOS, macOS); Wireless HID; Wireless HID + MAC; USB HID; USB HID + MAC; MODBUS RTU (modifications) Functions: Analog Scale, Preset, Graphic, Go/NoGo, Max/Min, Formula, Timer, Resolution selection, Linear error compensation, Manual temperature compensation, Connection indication, Peak, Limits, FW update Calibration: ISO 17025 calibration certificate (Ilac MRA) included; calibration date control and linear error compensation available Power: Rechargeable 500 mAh Li‑Pol battery, USB‑C charging/data socket Delivery set: Measuring tool; Free versions of the MDS App; USB data/charging cable; Calibration protocol Notes: Internal jaws and depth per ISO13385‑1 Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What measurement accuracy can I expect from the DataMet eFORCE 1-20N caliper by Microtech Metrology? The DataMet eFORCE 1-20N caliper by Microtech Metrology provides an accuracy of 0.005 mm on the external jaws with selectable resolution down to 0.0005 mm, making it suitable for precision workshop and lab checks. How does data transfer work with the DataMet eFORCE 1-20N caliper and can it connect to mobile devices? The DataMet eFORCE 1-20N caliper supports Wireless to the MDS app (Windows, Android, iOS, macOS), Wireless HID modes and USB HID; transfers to smartphones and tablets are possible directly from the tool without extra senders. Is the measurement force adjustable and why does that matter for the DataMet eFORCE 1-20N caliper? Yes, the DataMet eFORCE 1-20N caliper features E‑Force control allowing force selection from 1 to 20 N or AUTO mode; consistent measurement force ensures repeatable results, especially on soft or thin parts. Do I get a calibration certificate with the DataMet eFORCE 1-20N caliper and who can I contact for product questions? The DataMet eFORCE 1-20N caliper is supplied with an ISO 17025 calibration certificate. For further technical questions or application advice contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930; WhatsApp: +49 170 2837271

DataMet eFORCE 1-20N Caliper 0-200 x 0.0005 Wireless + USB + MODBUS (Swiss reading system) by Microtech Metrology The DataMet eFORCE 1-20N Caliper is a precision digital caliper designed for accurate shop-floor and laboratory measurements, combining force-controlled probing, ultra-fine resolution and flexible Industry 4.0 connectivity for production, quality control and R&D use. E-Force control 1–20 N for consistent pressure 0.0005 mm resolution with Swiss reading system 2.0'' Hi-res touchscreen for clear, fast operation Wireless, USB HID and MODBUS RTU connectivity Precision measurement with controlled force for repeatable results The caliper’s E-Force control allows manual selection of the measuring Force between 1–20 N, ensuring that each reading is taken only when the preset Force is reached; this prevents variability caused by differing operator pressure and makes results directly comparable across shifts. The integrated Force Indication and AUTO-Force mode support consistent application, so measurements are reproducible and less dependent on user technique. High resolution and reliable reading system for fine details Equipped with a Swiss reading system and selectable resolutions down to 0.0005 mm, the instrument resolves very small dimensional changes that typical calipers miss. The MICS Operating System with a colour 2.0'' Touchscreen presents Max/Min, Go/NoGo and statistical views clearly, while Linear Error and Temperature Correction functions reduce systematic deviations, improving confidence in critical tolerances. Seamless data flow for modern workshops and connected production Connectivity supports multiple transfer modes: wireless transfer to the MDS app (Windows, Android, iOS, MacOS), Wireless HID (with optional MAC), USB HID and a MODBUS RTU option for industrial integration. Microtech’s wireless approach simplifies data handling compared with U-WAVE Technologie von Mitutoyo: only a single dongle is required for PC reception and direct transfers to smartphones are possible from the measuring tool itself, removing extra connectors and transmitters. Memory, calibration and shop-floor durability Onboard memory stores 2000 values with folder structure and statistics, enabling batch collection and later export. A calibration certificate (ISO17025, Ilac MRA) is included to support traceability. The instrument is optimised for routine use: menu-driven Preset and Formula functions speed recurring tasks, while Peak, Timer and Limit features support inspection workflows with fewer manual steps. Suited applications and target users Manufacturing teams, maintenance technicians, toolmakers and inspection labs benefit most from this caliper’s combination of high resolution, force control and connectivity. It is particularly useful when small tolerance deviations must be tracked, when measurements need automated logging, or when integration into MES/SCADA via MODBUS is required. For general workshop tasks the 0–200 mm range places this instrument in the extended category (>150–300 mm), offering a balance of reach and handling. Strong recommendation: For demanding measurement tasks rely on Microtech Metrology’s DataMet eFORCE 1-20N Caliper with E-Force control and advanced connectivity — for personalised advice or if you need additional technical details, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 DataMet eFORCE 1-20N Caliper 0-200 x 0.0005 Wireless + USB + MODBUS (Swiss reading system) Brand: Microtech Metrology SKU: 141088020M Measurement Range Min: 0 mm Measurement Range Max: 200 mm Resolution: 0.0005 mm (selectable 0.0005 / 0.001 / 0.01 / 0.1 mm) Measuring Force: 1-20 N (E-Force control with AUTO-Force mode) Accuracy: 0.008 Display: 2.0'' Colour Touchscreen (Hi-res) Data Transfer Modes: Wireless to MDS app (Windows, Android, iOS, MacOS); Wireless HID; Wireless HID+MAC; USB HID; MODBUS RTU (modifications available) Hub Connection: HUB (2D, Probe) synchronization as Master or Slave device Functions: Go/NoGo, Max/Min, Formula, Timer, Preset, Peak, Limits, Resolution Selection, Manual Temperature Compensation, E-Force control, Firmware update, Graphic, Synchronized Device, Timer, Resolution Selection, Linear Error Compensation, Calibration Date Control Memory: 2000 values with folders and statistics; data transfer from memory supported Battery / Power: Rechargeable Li-Pol battery 600 mAh, USB-C charging/data socket Delivery Set: Messwerkzeug; Free Versions of MDS App; USB Data/Charging Cable; Calibration Protocol; ModBus RTU Certification: Calibration certificate ISO17025 (Ilac MRA) included Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Is the DataMet eFORCE 1-20N Caliper suitable for production measurement tasks? The DataMet eFORCE 1-20N Caliper from Microtech Metrology is designed for production and inspection environments, offering Force control, high resolution and MODBUS/USB/Wireless data paths so that measurements can be reliably recorded and integrated into production systems. How does the E-Force control improve measurement consistency with the DataMet eFORCE 1-20N Caliper? With the DataMet eFORCE 1-20N Caliper the E-Force control ensures readings are captured only when the set measuring Force is reached, reducing operator-induced variability and enabling repeatable comparisons across different users and shifts. Can I connect the DataMet eFORCE 1-20N Caliper to mobile devices and PC software? Yes, the DataMet eFORCE 1-20N Caliper supports Wireless transfer to the MDS app (Windows, Android, iOS, MacOS), Wireless HID, USB HID and offers MODBUS RTU for industrial systems, making it flexible for direct mobile use or PC integration. What documentation and calibration come with the DataMet eFORCE 1-20N Caliper? The delivery set for the DataMet eFORCE 1-20N Caliper includes a Calibration Protocol and an ISO17025 (Ilac MRA) calibration certificate, plus the free versions of the MDS App and the USB data/charging cable. Not sure if this caliper meets your needs or need more technical data? If you are unsure whether the DataMet eFORCE 1-20N Caliper from Microtech Metrology suits your application or you require additional technical specifications, METAV Werkzeuge provides comprehensive advice — contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271.

Dreipunkt-Innenmessschraube für Sacklochbohrungen Die Dreipunkt-Innenmessschraube für Sacklochbohrungen ermöglicht präzise Innenmessungen selbst in tiefen, schwer zugänglichen Bohrungen. Selbstzentrierend für reproduzierbare Messungen Messbereich 225–240 mm für tiefe Bohrungen Ablesung 0,005 mm, Genauigkeit 0,007 mm HM-Messflächen, verschleißfest Austauschbarer Messeinsatz für flexible Anwendung Präzision und Messleistung für anspruchsvolle Innenmessungen Die Dreipunkt-Innenmessschraube verbindet eine feine Ablesung von 0,005 mm mit einer Genauigkeit von 0,007 mm, wodurch exakte Messwerte auch bei enge Toleranzen erzielt werden. Durch das selbstzentrierende Messprinzip wird die Lage im Bohrungsinnenraum automatisch stabilisiert, was Messfehler reduziert und die Reproduzierbarkeit erhöht. Diese Kombination sorgt dafür, dass Bauteilkontrollen schneller und zuverlässiger durchgeführt werden können. Robuste Ausführung für lange Standzeiten HM-Messflächen bieten hohe Verschleißfestigkeit und sorgen für konstante Messergebnisse über lange Zeiträume. Der austauschbare Messeinsatz ermöglicht einfachen Service und minimalen Stillstand, da nur der Einsatz gewechselt werden muss, nicht das komplette Messgerät. Mit einer Bauhöhe von 145 mm und langlebigen Werkstoffoptionen eignet sich das Werkzeug für den rauen Einsatz in Produktionsumgebungen und Messräumen. Praxisnahe Anwendung und Zielgruppe Diese Messschraube richtet sich an Qualitätsmanagment, Instandhaltung und Fertigungsbetriebe, die Innenmaße von Sacklochbohrungen zuverlässig erfassen müssen. Anwender profitieren von schnellen Einrichtzeiten, reproduzierbaren Ergebnissen und der Möglichkeit, auch schwer zugängliche Innenkonturen präzise zu prüfen. Die kompakte Bauform erleichtert die Handhabung an Einzelteilen sowie in Prüffeldern. Herstellerkompetenz und Unterstützung durch METAV Werkzeuge Metav IndustryLine steht für Präzision und Industriequalität; die Serie wurde entwickelt, um den Anforderungen von Fertigung und Messwesen gerecht zu werden. METAV Werkzeuge bietet umfangreiche und kompetente Beratung bei Auswahl, Einsatz und technischem Support. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Für präzise Innenmessungen in Sacklochbohrungen die Dreipunkt-Innenmessschraube von Metav IndustryLine wählen und bei Bedarf die individuelle Beratung von METAV Werkzeuge in Anspruch nehmen – kontaktieren Sie uns gerne direkt. Bezeichnung: Dreipunkt-Innenmessschraube Marke: Metav IndustryLine SKU: MS908.668 Produkttyp: Messschraube für Innenmessung Messbereich: 225–240 mm Messbereich (min): 225 mm Messbereich (max): 240 mm Länge: 145 mm Ablesung: 0,005 mm Genauigkeit: 0,007 mm Analog Selbstzentrierend HM-Messflächen Messeinsatz: Austauschbar Geeignet für: Sacklochbohrung Lieferung im Kasten Hersteller / Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ Wie genau misst die Dreipunkt-Innenmessschraube von Metav IndustryLine und wofür ist sie geeignet? Die Dreipunkt-Innenmessschraube von Metav IndustryLine liefert eine Ablesung von 0,005 mm und eine Genauigkeit von 0,007 mm und ist speziell für präzise Innenmessungen in Sacklochbohrungen konzipiert. Kann der Messeinsatz bei der Metav IndustryLine Messschraube gewechselt werden? Ja, die Metav IndustryLine Messschraube verfügt über einen austauschbaren Messeinsatz, sodass Verschleißteile schnell ersetzt werden können, ohne das komplette Messgerät zu tauschen. Sind die Messflächen bei der Messschraube verschleißfest? Die Messflächen der Metav IndustryLine Dreipunkt-Innenmessschraube sind als HM-Messflächen ausgeführt und bieten dadurch hohe Verschleißfestigkeit für lange Lebensdauer. Liegt die Messschraube einsatzbereit im Kasten? Ja, die Lieferung erfolgt im Kasten, sodass die Messschraube geschützt und transportfähig bereitgestellt wird. Wer bietet technischen Support und Beratung zur Metav IndustryLine Messschraube an? METAV Werkzeuge bietet umfangreiche und kompetente Beratung; bei Fragen zu Anwendung oder technischen Daten erreichen Sie uns unter info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#MS908.668","sku":"MS908.668","mpn":"MS908.668","name":"Dreipunkt-Innenmessschraube MS908.668","brand":{"@type":"Brand","name":"Metav IndustryLine"},"description":"225-250 mm Dreipunkt-Innenmessschraube, Selbstzentirerend, Austauschbar, Ablesung 0,007 mm, geeignet für Sacklochbohrungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/71/1c/59/68/68591c71e17dcfe8e962188d/MS908659-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Messbereich","value":"225-250 mm"},{"@type":"PropertyValue","name":"Ablesung","value":"0,007 mm"},{"@type":"PropertyValue","name":"Besonderheit","value":"Selbstzentirerend"},{"@type":"PropertyValue","name":"Messeinsatz","value":"Austauschbar"},{"@type":"PropertyValue","name":"Geeignet für","value":"Sacklochbohrung"},{"@type":"PropertyValue","name":"HM Messflächen","value":"true"},{"@type":"PropertyValue","name":"Analog","value":"true"},{"@type":"PropertyValue","name":"Länge","value":"145 mm"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Messbereiche deckt die Dreipunkt-Innenmessschraube ab?","acceptedAnswer":{"@type":"Answer","text":"Die Dreipunkt-Innenmessschraube MS908.668 deckt den Messbereich 225-250 mm ab und ist speziell für Sacklochbohrungen geeignet."}},{"@type":"Question","name":"Wie genau ist die Messschraube von Metav IndustryLine?","acceptedAnswer":{"@type":"Answer","text":"Die Messschraube MS908.668 bietet eine Ablesung von 0,007 mm für präzise Innenmessungen."}},{"@type":"Question","name":"Welche Besonderheiten hat die MS908.668?","acceptedAnswer":{"@type":"Answer","text":"Die MS908.668 ist selbstzentirerend und hat einen austauschbaren Messeinsatz, ideal für wiederholbare Messungen."}},{"@type":"Question","name":"Ist die Dreipunkt-Innenmessschraube analog oder digital?","acceptedAnswer":{"@type":"Answer","text":"Die MS908.668 ist analog und verfügt über HM Messflächen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/dreipunkt-innenmessschraube-ms908.668","dateModified":"2026-03-27T12:00:00+01:00","mainEntity":{"@id":"#MS908.668"},"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Dreipunkt-Innenmessschraube"},{"@type":"Thing","name":"Sacklochbohrung"},{"@type":"Thing","name":"Präzisionsmesstechnik"}],"mentions":[{"@type":"Thing","name":"Austauschbarer Messeinsatz"},{"@type":"Thing","name":"HM Messflächen"},{"@type":"Thing","name":"Selbstzentirerend"}]}]}

DataMet eFORCE 1-20N Caliper 0-300x0.0005 Wireless + USB + MODBUS (Swiss precision system) by Microtech Metrology DataMet eFORCE 1-20N Caliper 0-300x0.0005 Wireless + USB + MODBUS (Swiss precision system) is a precision electronic caliper designed for industrial and workshop measurement tasks, combining selectable force control with high-resolution measurement and versatile data transfer for modern production environments. E-Force control with selectable 1–20 N Resolution down to 0.0005 mm (0.5 μm) Wireless transfer to MDS app and USB HID 2.0 / 2.4'' hi-res Touchscreen readout Memory for 2,000 values with folders & stats Precise measurement with controlled force for reproducible results The E-Force module enables manual selection of measuring force from 1–20 N and includes an AUTO‑Force mode and colour force indication. By setting the measuring force, the tool ensures that every reading is taken only when the specified pressure is reached, which secures repeatable and comparable results across different operators and materials. This controlled-force approach reduces deformation on soft parts and improves reliability when measuring small or delicate components. High resolution and robust reading system for fine workpieces Equipped with a Swiss‑made reading system, the instrument offers a selectable resolution of 0.0005 / 0.001 / 0.01 / 0.1 mm, enabling micrometer‑grade discrimination where required. The large Hi‑res 2.0 / 2.4'' Touchscreen provides clear numeric and graphical feedback, while functions such as Max/Min, Go/NoGo and Resolution Selection help to interpret results quickly. The included Calibration Certificate (ISO17025, Ilac MRA) documents accuracy for quality assurance processes. Seamless connectivity for Industry 4.0 workflows Data transfer options include wireless output to the MDS app (Windows, Android, iOS, MacOS), Wireless HID, Wireless HID+MAC, USB HID, and optional MODBUS RTU for industrial integration. Compared with the U‑WAVE technology of Mitutoyo, Microtech’s transfer approach is simpler: no separate connectors or multiple transmitters are required. A single dongle receives data on a PC, while transfers to iPhone, iPad and Android smartphones occur directly from the measuring tool, streamlining data capture across devices and reducing setup complexity. Built for production: memory, statistics and industrial I/O The internal manager stores up to 2,000 values with folder support and statistical modes, and memory can be transferred wirelessly or via USB. For factory automation, the caliper offers MODBUS RTU output (RS‑485) and can be configured for MODBUS ASCII or MODBUS TCP/IP on request. These features make the instrument suitable for both bench use and automated data collection, supporting traceability and process control. Intended applications and suitability Positioned in the extended range ( >150–300 mm ) classification, this caliper is ideal where additional reach beyond compact workshop tools is needed without sacrificing handling. Typical applications include assembly verification, maintenance checks and quality control of medium-sized components. The combination of selectable force control, high resolution and multiple data interfaces makes it particularly suited to metrology tasks where material sensitivity and digital data collection are priorities. Strong recommendation: For reliable, repeatable measurements and modern data integration choose Microtech Metrology's DataMet eFORCE caliper and consult METAV Werkzeuge for expert application advice — Email: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 DataMet eFORCE 1-20N Caliper 0-300x0.0005 Wireless + USB + MODBUS (Swiss precision system) Brand: Microtech Metrology SKU: 141088030M Measuring Range: 0–300 mm Resolution: 0.0005 mm (selectable 0.0005 / 0.001 / 0.01 / 0.1 mm) Accuracy: 0.01 mm (as specified) Measuring Force: 1–20 N, manual selection and AUTO‑Force mode Display: 2.0 and 2.4'' Hi‑res Touchscreen displays Data Transfer Modes: Wireless to MDS app (Windows, Android, MacOS, iOS); Wireless HID; Wireless HID+MAC; USB HID; optional MODBUS RTU Hub Connection: HUB (2D, Probe) synchronization as Slave or Master device Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Manual temperature compensation, Resolution selection, Peak, Limits, FW update, E‑Force control, Graphic, Synchronized device, Preset, Connection indication Memory: 2000 values with folders, statistics; data transfer from memory supported Calibration: Calibration certificate included (ISO17025 (Ilac MRA)), Calibration date control, Linear error compensation Battery / Power: Rechargeable 600 mAh Li‑Pol battery, USB‑C charging/data socket Delivery Set: Measuring Tool; Free versions of MDS App; USB Data/Charging Cable; Calibration Protocol; ModBus RTU Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What is the measuring range and resolution of the DataMet eFORCE 1-20N Caliper from Microtech Metrology? The DataMet eFORCE 1-20N Caliper by Microtech Metrology measures from 0 to 300 mm and offers a selectable resolution down to 0.0005 mm (0.5 μm), with additional resolution options of 0.001, 0.01 and 0.1 mm. How does the E‑Force control improve measurement consistency with the DataMet eFORCE 1-20N Caliper? With the DataMet eFORCE 1-20N Caliper, the measuring force can be set manually between 1 and 20 N; the instrument records values only when the preset force is reached, ensuring repeatable results and reduced part deformation during measurement. Can I connect the DataMet eFORCE 1-20N Caliper to my PC or mobile device? Yes, the DataMet eFORCE 1-20N Caliper supports wireless transfer to the MDS app (Windows, Android, MacOS, iOS), Wireless HID, Wireless HID+MAC, and USB HID. For industrial setups, MODBUS RTU output is available and MODBUS TCP/IP can be offered on request. Is a special dongle required for wireless transfers with the DataMet eFORCE 1-20N Caliper? For PC reception Microtech typically uses a single dongle; unlike the U‑WAVE technology of Mitutoyo, no additional connectors or multiple transmitters are necessary, and transfers to smartphones (iPhone, iPad, Android) can be done directly from the measuring tool. What comes in the delivery set of the DataMet eFORCE 1-20N Caliper and is software included? The delivery set includes the measuring tool, free versions of the MDS App, a USB data/charging cable, a calibration protocol and ModBus RTU support. The calibration certificate (ISO17025, Ilac MRA) is provided with the device.

Are you looking for the right Dino-Lite microscope and need help? We are happy to be there for you! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 Key Features for the Hand-Mikroscope Dino-Lite AM4113FVT2 Article number: AM4113FVT2 Brand: Dino-Lite Dino-Lite series: Dino-Lite Spezialbeleuchtung - UV-Licht Facts: Magnification: 20~70x/200x Resolution: 1.3 Megapixel Connection: USB 2.0 Numer of LEDs in area 1: 4 Cable length: ~1.8m Resolution in Pixel: 1280x1024 Lighting Nanometer: 375 Product Advantages Casing material: Kunststoff Light: uv Calibration function Measuring function Magnification Lock Microtouch Working Distance: Standard Norms: CE, FCC Made in Taiwan Manufacturer: AnMo Electronics Corporation; 17F-1, No. 97, Sec. 4, Chongxin Road, Sanchong Dist., New Taipei City 241513, Taiwan; Tel:+886-2-29749126; E-Mail:Sales@anmo.com.tw

Are you looking for the right Dino-Lite microscope and need help? We are happy to be there for you! 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications (Specs) Microscope AM4113T-FV2W Article number: AM4113T-FV2W Brand: Dino-Lite Dino-Lite series: Dino-Lite Spezialbeleuchtung - UV-Licht Numbers and Data: Magnification: 20~70x/200x Number of LEDs: 4 Resolution: 1.3 Megapixel Connection: USB 2.0 Numer of LEDs in area 1: 4 Cable length: ~1.8m Resolution in Pixel: 1280x1024 Lighting Nanometer: 375 Product Characteristics Casing material: Kunststoff Light: uv Calibration function Measuring function Magnification Lock Microtouch Working Distance: Standard Norms: CE, FCC Made in Taiwan Manufacturer: AnMo Electronics Corporation; 17F-1, No. 97, Sec. 4, Chongxin Road, Sanchong Dist., New Taipei City 241513, Taiwan; Tel:+886-2-29749126; E-Mail:Sales@anmo.com.tw

Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications for MGMN 200-02 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-02-CastIron Facts for the tool: ISO-Code: MGMN200-02 Clearance Angle: 30° Angle: 86° Radius: 0.2 Features Material: cemented carbide Usage for: Cast steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-02-Cast Iron-MetavCUT 40END

Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details indexable inserts VBGW 110306 from MetavCUT Brand: MetavCUT Manufacturer Order Number: VBGW110306-CBN-Steel Figures for the tool: ISO-Code: VBGW110306 Clearance Angle: 5° Angle: 35° Thickness: 3,18mm Radius: 0.6 Features Material: CBN Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-VBGW-110306-Stahl-MetavCUT 40END