10-100mm Digital Internal Groove Caliper With Preset, Stainless Hardened Metal Case, 3V Power - Metav IndustryLine
Taking advantage of a precise 0.01 mm digital readout, hardened stainless measuring faces and a dedicated design for internal grooves, this caliper delivers repeatable groove measurements within the 10–100 mm micro range; order the instrument directly via Metav Werkzeuge or request advice from our consultants for application support. Digital internal-groove caliper M240.039.N — 0.01 mm resolution, preset, INOX (Metav IndustryLine) The Digital internal-groove caliper M240.039.N is a compact, battery-powered instrument for accurate measurement of internal grooves and slots in small components across the 10–100 mm range 0.01 mm digital readout for fine precision Designed for internal groove measurement Hardened stainless measuring faces RB 5 data output for digital traceability Accurate measurement in confined spaces This instrument is built for precision where space is limited: with a measurement range of 10–100 mm it belongs to the micro class, making it suitable for fine mechanical and watchmaking tasks. The 0.01 mm resolution on the digital readout provides clear numeric feedback and reduces reading error compared to analogue scales. Because the instrument is explicitly configured for internal grooves, the measuring geometry and a 30 mm jaw length are optimised to reach narrow slots and recesses while maintaining stable contact. These characteristics translate into fewer re-measurements and a smoother inspection workflow. Robust construction for consistent results A combination of stainless steel components, hardened measuring faces and a metal housing ensures the caliper withstands everyday workshop handling without losing accuracy. The instrument’s mass (approx. 0.44 kg) and rigid construction reduce susceptibility to twist during measurement, improving repeatability when taking internal groove readings. Built to a reliable workshop standard, the solid materials also reduce long-term wear at the contact surfaces, which preserves calibration and extends service intervals. Digital workflow and traceability Equipped with a preset function and a straightforward display featuring ON/OFF and zero/preset controls, the caliper supports fast set-up and comparative work. Power is supplied by a 3 V cell for dependable operation, and the integrated RB 5 data output provides a direct channel for transferring measured values into digital records or quality-control software. The combination of immediate numeric output and data transfer capability reduces transcription errors and facilitates traceability in production or inspection records. Where this caliper delivers most value The instrument excels in precision trades and component inspection where internal grooves, slots and small recesses are critical features. Typical applications include micromechanical assemblies, small mould components and fine finishing operations in which accurate groove depth or width is essential. Thanks to its focused geometry and digital interface, the caliper integrates well into small-series production lines or laboratory benches where consistent, documented measurements are required. For dedicated guidance on integrating the Metav IndustryLine digital internal-groove caliper into inspection routines, or to place an order via Metav Werkzeuge GmbH, contact our team in Emmerich by phone or email for tailored advice and prompt supply Technical data Article number: M240.039.N GTIN: 4054469182476 Weight: 0.44 kg Measurement range: 10–100 mm Resolution: 0.01 mm Jaw length: 30 mm Core specifications Digital display with ON/OFF and zero/preset buttons Power: 3 V Data output: RB 5 Digital instrument (preset function) Materials & functions Material: stainless steel, hardened, metal housing Application: internal groove measurement Design: compact micro-class caliper Brand: Metav IndustryLine FAQ What measurement range does the caliper cover? The caliper measures from 10 mm to 100 mm, classifying it in the micro range for fine mechanical work. Is the resolution sufficient for precision inspection tasks? Yes, the 0.01 mm resolution on the digital readout makes the instrument suitable for many workshop and inspection tasks requiring fine accuracy. How are measured values transferred to a PC or data logger? This caliper features an RB 5 data output that enables digital transfer of measured values for traceable documentation and integration into quality systems. What powers the instrument and how is it operated? Operation is by a 3 V battery cell; controls comprise ON/OFF and zero/preset buttons for quick commissioning and relative measurements. Is the caliper suitable for small, hard-to-reach grooves? Yes, the geometry and a 30 mm jaw length are designed to reach narrow internal grooves while keeping stable contact for repeatable results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Dial Indicator Holder Ø5 mm With M2.5 Thread For Indicator Insert - Metav IndustryLine
Compact measuring insert offering a precise probe interface and secure threaded mounting for reliable dial‑gauge readings; ideal where repeatable small‑scale measurement and quick integration are required. Features such as the 100 mm length and the M2.5 threaded connection support straightforward retrofit to compatible calipers. Order the measuring insert directly via Metav Werkzeuge or ask our consultants if needed. Measuring Insert M240.207.A2 — Caliper dial‑gauge insert, 100 mm, Ø 5 mm (Metav IndustryLine) The Measuring Insert M240.207.A2 is a compact caliper accessory designed to accept a dial‑gauge probe and to integrate cleanly with specified caliper models for fine measurement tasks. Compatible with 240.207.N–240.209.N calipers Compact 100 mm length for tight workspaces Ø5 mm probe interface for standard dial gauges M2.5 threaded connection for secure mounting Precise probe interface for dependable readings The insert provides a defined mechanical interface that stabilises a dial‑gauge probe and reduces measurement variability caused by loose fittings. With a Ø5 mm probe bore and an M2.5 thread, the component establishes a secure connection to the gauge head, so readings remain repeatable under repeated use. This engineered fit supports efficient inspection routines and shortens set‑up time in repetitive metrology tasks. Compact format suited to delicate assemblies Classified within the micro caliper group because of its 100 mm length, this accessory is optimised for fine mechanical and small‑part measurement where stiffness and minimal lever arm are essential. The short profile keeps torsion and bending influences low, helping to preserve accuracy when measuring small parts, watch components or other precision assemblies. The result is consistent measurement performance in constrained workspaces. Easy retrofit and workshop compatibility Designed as an accessory for a narrow range of caliper models, the insert avoids complex adapters and lets workshops extend the functionality of existing tools quickly. The lightweight construction aids handling and alignment during installation while the standard thread and probe bore ensure broad compatibility with common dial gauges. For production environments, this means faster changeovers and more predictable measurement processes without substantial equipment modification. Contact Metav Werkzeuge today to discuss integration options for this Metav IndustryLine insert and to confirm compatibility with existing calipers on the shop floor Technical Data Article number: M240.207.A2 GTIN: 4054469151496 Category: Messschieber (Caliper accessories) Customs tariff number: 90178090 Core data Length: 100 mm Diameter: 5 mm Thread: M2.5 Weight: 0.1 kg ECLASS: 21170613 ETIM: EC002219 Special features Compatible with models 240.207.N–240.209.N For dial‑gauge probe insertion Caliper accessory for fine mechanical measurements Category path: Messgeräte > Messschieber FAQ Is this insert compatible with my caliper models 240.207.N–240.209.N? Yes. The Measuring Insert M240.207.A2 is specified for use with caliper models 240.207.N–240.209.N and provides the Ø5 mm probe interface and M2.5 thread required for standard dial‑gauge mounting. What measurement tasks is this insert intended for? This insert is intended for small‑scale precision measurements, especially in fine mechanical assemblies where a compact, stiff probe interface supports repeatable inside, outside or step checks when paired with a dial gauge. How is the dial gauge secured to the insert? A threaded connection is used: the M2.5 thread engages the gauge mounting, while the Ø5 mm bore centres the probe shank for a stable and repeatable seating. Does the insert include any calibration certificate? The product is an accessory for probe mounting; calibration requirements typically apply to the measuring instrument (caliper or dial gauge) rather than the insert itself. For instrument calibration options, please refer to the gauge or caliper documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Outer Groove Measuring Attachment For Digital Uni Carbon Fibre Caliper - Metav IndustryLine
Take advantage of the carbon‑fibre construction, 100 mm reach and compatibility with calipers that have a jaw thickness of 8 mm for consistent external groove measurements; order this insert directly via Metav Werkzeuge or consult our specialists for application advice. Insert for External Groove Measurement, 100 mm — carbon‑fibre accessory for digital universal calipers (Metav IndustryLine) The Insert for External Groove Measurement, 100 mm is a purpose‑built attachment for carbon‑fibre digital universal calipers that extends measurement capability to external grooves with consistent handling and fit. Carbon‑fibre construction for stable readings 100 mm reach for extended groove access Fits calipers with 8 mm jaw thickness Lightweight 0.2 kg for easy handling Reliable groove measurement with extended reach Designed for precise work on external grooves, the 100 mm insert provides an extended reach that simplifies measurement of grooves and recesses that standard jaws struggle to access. The accessory is intended for use in workshop and production environments where repeatable external groove measurement is required. Compatibility with digital universal calipers ensures the adapter can be integrated into established measuring workflows without altering the instrument’s basic operation. Stable performance thanks to carbon‑fibre design Made from carbon‑fibre, the insert combines low mass with structural stiffness, supporting steady contact during measurement and minimising thermal influence on short inspection runs. The lightweight nature (0.2 kg) reduces additional inertia on the caliper, helping operators maintain consistent handling over multiple measurements. These material benefits translate into practical advantages at the bench: easier manoeuvring into grooves and reduced risk of deflection compared with heavier attachments. Quick integration with digital universal calipers The insert is engineered to fit jaws with a thickness of 8 mm, delivering a secure seating and reliable transfer of the measuring surfaces to the caliper’s slide. Installation is straightforward and restores the caliper’s functionality for external groove checks without the need for special fixtures. As an accessory for digital universal calipers, it preserves the instrument’s measurement workflow while extending its application range. Practical accessory for everyday workshop use As a workshop accessory from Metav IndustryLine, the insert supports routine inspection and maintenance tasks where grooves must be checked quickly and reliably. Its design focuses on practicality: accessible reach, low weight and direct compatibility with common caliper jaws. For purchasing and logistics, Metav Werkzeuge supplies this accessory alongside a broad range of measuring tools, providing a single‑source option for workshops aiming to keep operations efficient and supplies standardised. For specification advice or to request the Metav IndustryLine 100 mm insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific calipers and applications Technical data Article number: M217.366 GTIN: 4054469183268 Manufacturer: Metav IndustryLine Facts Overall length: 100 mm Width: 16 mm Weight: 0.2 kg Compatible jaw thickness: 8 mm Special features Material: carbon‑fibre Application: external groove measurement Compatible with digital universal calipers Category: workshop calipers accessory eClass: 21170344 FAQ What is this insert used for? The insert is intended for external groove measurement; the Metav IndustryLine insert M217.366 extends the reach of digital universal calipers for groove and recess inspection. Will this accessory fit my caliper? It fits calipers with a jaw thickness of 8 mm; compatibility with a specific digital universal caliper is confirmed when the jaw thickness and mounting geometry match the M217.366 design. What material is the insert made from? The insert is manufactured from carbon‑fibre, chosen for its low mass and structural stiffness to support stable measurements. How long is the insert and how heavy is it? The insert measures 100 mm in overall length and has a mass of 0.2 kg, providing extended reach without significant additional weight. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Digital Caliper Carbon Fibre Inductive System Replaceable Jaw, IP65 - Metav IndustryLine
Take advantage of the combination of long-range measurement, robust carbon‑fibre construction and reliable digital output for reproducible workshop control of large components. Order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. M217.361 Digital universal caliper — 1000 mm carbon fibre, IP65 (Metav IndustryLine) The M217.361 Digital universal caliper is a long‑range, inductive digital caliper intended for workshop measurement of large components and assemblies, offering a balance of reach and handling for fixture, housing and heavy‑duty machining tasks. 1000 mm carbon fibre beam IP65 protection for dusty and wet environments Inductive measuring system for stable readings Replaceable jaw and spring-mounted thumb roller Large‑range measurement with manageable handling The long‑beam design provides a measuring range of 0–1000 mm, which places this instrument among large‑range workshop calipers suited to components such as housings, large fixtures and medium‑sized shafts. The choice of carbon fibre for the main beam reduces thermal distortion compared with plain steels while keeping the device relatively easy to manoeuvre for single‑operator measurement tasks. With a jaw length of 100 mm and an inductive slide mechanism, the instrument combines reach with the stiffness required to preserve measurement repeatability across the full stroke. Consistent digital output and practical operation An inductive measuring system and a digital display with mm/inch, Hold, Set, On/Off, 0/Inch and Data keys deliver fast, unambiguous readouts and allow integration into data workflows via the RB 6 data output. The display resolution is 0.01 mm, enabling routine workshop tolerancing and fast checks; the specified accuracy of ±0.07 mm gives an objective basis for process control decisions when assessing larger parts where absolute micrometre precision is not required but reproducibility is crucial. Power is supplied by a 3 V CR 2032 cell, ensuring stable operation for extended inspection sessions. Practical features for everyday workshop use Durability and serviceability are emphasised by the replaceable measuring jaw and a spring‑mounted thumb roller, which simplify maintenance and prolong service life in busy environments. The IP65 rating protects the measuring electronics against dust ingress and water jets, reducing downtime and cleaning interventions in harsher production areas. Together these characteristics support efficient inspection routines and lower the total cost of ownership by limiting service interruptions and simplifying component replacement. Clear advantages for production and quality tasks As a long‑range digital caliper with a carbon‑fibre beam and inductive sensing, the instrument is particularly suited to applications where a wide measuring span and reliable digital output matter more than sub‑micrometre resolution. Typical use cases include bench and fixture inspection, outer and inner diameter checks on larger parts, and stage‑level verification during assembly. The combination of repeatable digital readings and rugged protection helps to streamline quality documentation and traceability within standard workshop processes. For tailored advice on integrating the M217.361 into production or inspection setups, contact Metav Werkzeuge for expert support and prompt dispatch from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M217.361 GTIN: 4054469183213 Brand: Metav IndustryLine Core technical data Measuring range: 0–1000 mm Resolution: 0.01 mm Accuracy: ±0.07 mm IP protection: IP65 Jaw length: 100 mm Battery: 3 V CR 2032 Special features Material: Carbon fibre Measuring system: inductive Display functions: mm/inch, Hold, Set, On/Off, 0/Inch, Data Replaceable jaw and spring-mounted thumb roller Data output: RB 6 Digital caliper FAQ What measuring range does the caliper cover? The measuring range is 0–1000 mm, making the instrument suitable for larger workshop components and assemblies. How accurate are the readings from this caliper? The caliper provides readings with an accuracy of ±0.07 mm and a resolution of 0.01 mm, appropriate for large‑format workshop inspection where reproducibility is essential. Which data interface is available for digital collection? Data is provided via an RB 6 output, allowing the caliper to feed measurement values into compatible data capture systems. Is the instrument protected against workshop conditions? Yes — the instrument carries an IP65 rating for resistance to dust and water jets, and its carbon‑fibre beam reduces thermal effects compared with conventional steel beams. Are any user‑replaceable parts included for maintenance? The design includes a replaceable measuring jaw and a spring‑mounted thumb roller to simplify routine maintenance and extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Digital Caliper With Top And Bottom Removable Measuring Jaws, 0.01mm Resolution, IP54? - Metav IndustryLine
Take advantage of the combination of a long 1,000 mm range, a robust hardened stainless steel construction and an intuitive digital display for reliable measurement of large components; order the caliper directly via Metav Werkzeuge or consult our advisors for integration into existing quality processes. Digital Universal Caliper M240.204 — 1,000 mm, digital readout The Digital Universal Caliper M240.204 is a heavy‑duty 1,000 mm digital caliper engineered for workshop and fixture applications where long‑range, repeatable measurements are required. 1,000 mm measuring range Hardened stainless steel construction Digital display with mm/inch and ABS/INC RB 2 data output for process integration Long reach for large assemblies and robust repeatability The extended 1,000 mm range places this instrument in the large‑scale caliper class, intended for measurements on sizeable workpieces such as plates, housings and large fittings. The long beam design gives a favourable balance between reach and rigidity: a stiffer profile reduces deflection over length, which improves reproducibility when measuring across spans. For production environments and jigs where a single tool must cover larger geometries, this caliper provides a practical alternative to multiple short gauges. Precise digital measurement and data transfer capability Equipped with a digital display featuring mm/inch, ABS/INC and a 0/PRESET function, the instrument simplifies switching units and datum settings during inspection tasks. The reading resolution is 0.01 mm, delivering the clarity typical of standard digital calipers while the RB 2 data output enables connection to data collectors or SPC systems for traceable measurement logging. Together, these features support efficient quality workflows and reduce manual transcription errors. Durable construction tuned for workshop use The caliper is manufactured from hardened stainless steel with a protective metal housing, designed to withstand day‑to‑day workshop handling and resist corrosion. Upper and lower measuring faces are specified as 20 × 15 mm, with the upper jaw length at 50 mm and the lower jaw length at 100 mm, giving secure contact surfaces for both accessible and recessed measurements. At a weight of 2.5 kg the instrument balances solid build quality with manageable handling for single‑operator use or bench measurement tasks. Practical application: integration, inspection and workshop reliability This digital caliper is suitable for integration into metrology benches, incoming inspection and jig verification where longer measurement spans are required. The combination of a clear digital interface, robust materials and a dedicated data output supports repeatable checks and streamlined documentation. Backed by Metav’s distribution network and quality control in Emmerich, the tool is intended for industrial users seeking dependable measurement over longer lengths without sacrificing the convenience of digital readout. Order the Digital Universal Caliper M240.204 through Metav Werkzeuge for local stock availability and specification assistance—Metav Werkzeuge in Emmerich offers product advice and reliable delivery for professional measurement needs. Technical Data Article number: M240.204 GTIN: 4054469158273 Category: Messschieber Measuring range: 0–1000 mm Resolution (display): 0.01 mm Weight: 2.5 kg Jaw upper length: 50 mm Jaw lower length: 100 mm Material: hardened stainless steel Housing: metal housing Digital functions: ON/OFF, mm/inch, ABS/INC, 0/PRESET Data output: RB 2 FAQ What measurement range does this caliper cover? The Digital Universal Caliper M240.204 covers a measuring range of 0–1000 mm, making it suitable for larger components and assemblies. What level of resolution and display functions are provided? The caliper offers a display resolution of 0.01 mm and includes ON/OFF, mm/inch switching, ABS/INC and 0/PRESET functions for straightforward operation. Can measurement data be exported to a data logger or PC? Yes. The instrument is equipped with an RB 2 data output to enable connection to data collectors or SPC systems for streamlined documentation. What materials and jaw dimensions does the caliper use? The caliper is made from hardened stainless steel with a metal housing; the upper jaw length is 50 mm and the lower jaw length is 100 mm, both with a contact cross‑section of 20 × 15 mm. Is this instrument suitable for workshop and production environments? Designed with a robust build and clear digital functions, the Digital Universal Caliper M240.204 is appropriate for workshop inspection, jig verification and production quality checks where extended measuring range is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Pointed Jaws 150mm Depth, 0.02mm Graduation, Hardened Stainless Steel, Fine Adjustment, Supplied In Case - Metav IndustryLine
Take advantage of a robust monoblock design, hardened stainless steel construction and precise fine adjustment to keep large-format measurements reliable and repeatable on the production floor; order directly via Metav Werkzeuge or ask the consultants for technical advice. M201.309 Workshop Caliper with Tip — 1,000 mm range, 0.02 mm resolution, stainless The M201.309 Workshop Caliper with Tip is a heavy-duty analogue caliper built for workshop measurement tasks, providing robust external, internal and step measuring capability for large components. 1,000 mm measuring range Hardened stainless steel construction Fine adjustment screw for precise setting Monoblock frame for high rigidity Stable long‑range measuring for larger components Classified in the Large measurement class (500–1,000 mm), this caliper is tailored to workshop and fixture environments where reach and repeatability matter. The monoblock frame reduces flex along the slide, maintaining alignment over the full measuring length and supporting reproducible results on larger workpieces. The extended jaw geometry with a 150 mm tip length enables secure contact on deep features and shoulders, which simplifies handling of housings, large shafts and assembly fixtures without compromising stiffness. Accurate analogue readings with workshop durability The analogue vernier delivers a mechanical resolution of 0.02 mm, keeping the instrument within the range of the highest mechanical precision for calipers. Combined with a matt‑chromed scale on hardened stainless steel, the scale contrast remains clear under workshop lighting and resistive to corrosion. A dedicated fine adjustment screw permits measured, micro‑movement of the slide for exact closing and alignment before the reading is taken, which is particularly useful when measuring step heights or small depth differences where controlled contact force improves consistency. Practical features that support production workflows Designed for use in everyday machine‑shop conditions, the caliper covers external, internal and step measurements in one instrument and is supplied in a transport case for safe handling and storage during site movement. The mechanical vernier format suits environments where robust, battery‑free operation is preferred and service intervals are minimal. Delivered to factory standard (Werksnorm), the instrument is well suited to workshop quality checks and setup tasks; its straightforward mechanics reduce the need for frequent recalibration cycles compared with sensitive electronic instruments. Choose the Metav IndustryLine M201.309 for durable, long‑range workshop measurement and contact Metav Werkzeuge for expert advice and secure supply directly from Emmerich. Technical Data Article number: M201.309 GTIN: 4054469101293 Brand: Metav IndustryLine Facts Measuring range: 0–1000 mm Resolution: 0.02 mm Jaw length: 150 mm Vernier scales: 1/1000" top and 1/50 mm bottom Special features Material: hardened stainless steel with matt‑chromed scale Design: monoblock frame Operation: analogue vernier, fine adjustment screw Measurement types: external, internal, step Delivery: transport case for safe movement Calibration: factory standard (Werksnorm) FAQ How precise is the caliper for workshop tasks? The M201.309 workshop caliper provides a mechanical resolution of 0.02 mm, placing it among the highest‑precision analogue calipers suitable for demanding workshop measurements. Which measurement types can be performed with this caliper? External, internal and step measurements are supported by the caliper; the 150 mm jaw/tip length helps reach deeper features while keeping contact stable. Is the instrument protected for transport between job sites? Yes, the caliper is supplied in a transport case to protect the hardened stainless steel body and scale during movement and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm External Measuring Jaw Insert For Digital Carbon Fibre Caliper, 8mm Beak Thickness - Metav IndustryLine
Benefit from the carbon‑fibre lightness and a precise 100 mm external measuring length that keep repeatability high and handling effortless; the low mass and rigid profile reduce measurement error for small components. Order the (M217.364.1 100 mm external jaw insert) directly via (Metav Werkzeuge) or ask our consultants if needed. M217.364.1 — Carbon‑fibre 100 mm external jaw insert for digital universal calipers (Metav IndustryLine) M217.364.1 is a dedicated external measuring jaw insert designed to convert a digital universal caliper into a lightweight, rigid tool for workshop and fine‑mechanical external measurements. Carbon‑fibre construction for low weight 100 mm external measuring length Compatible with 8 mm jaw thickness Precision oriented for workshop calipers Engineered for reproducible external measurements The carbon‑fibre construction delivers a favourable stiffness‑to‑weight ratio so that each contact requires less handling effort while preserving stability. The 100 mm measuring length is optimised for micro and workshop tasks where repeatability matters more than extended reach; the reduced mass limits deflection and vibration during contact, giving a consistent external measuring jaw that supports reliable dimensional control in serial checks. The insert is produced to fit calipers with a jaw thickness of 8 mm, ensuring a secure mechanical interface without modifying the base instrument. Ideal choice for micro‑range workshop work Classified in the micro range (up to 100 mm), this insert suits fine mechanical assemblies where compact geometry and high positional accuracy are required. The geometry and material are chosen to assist one‑handed measurement routines common in maintenance, toolmaking and small‑part inspection: the lightness shortens cycle time per measurement while the rigid profile helps maintain alignment on curved or small surfaces. Compatibility with digital universal calipers allows seamless integration into existing metrology workflows, improving throughput without the need for additional heavy fixturing. Practical durability and clear operational advantages At approximately 0.2 kg and with an overall length of 100 mm, the insert balances low weight with a robust feel for daily use. Carbon‑fibre resists corrosion and reduces the risk of surface marking compared with some metallic alternatives, supporting longer service life in mixed workshop environments. The design focusses on a single, measurable benefit per operation: faster handling and fewer retakes. For routine external checks on components, this translates directly into time savings and fewer inspection discrepancies during repetitive tasks. Contact Metav Werkzeuge to confirm fitment and secure the M217.364.1 carbon‑fibre 100 mm external jaw insert for your digital universal calipers Technical data Article number: M217.364.1 GTIN: 4054469183244 Brand: Metav IndustryLine Facts Overall length: 100 mm Weight: 0.2 kg Width: 16 mm Special features Material: carbon‑fibre Fits calipers with jaw thickness 8 mm Application: external and internal measurement compatibility Category: workshop caliper accessory FAQ Is this insert compatible with standard digital universal calipers? The insert M217.364.1 is designed for digital universal calipers and fits models with a jaw thickness of 8 mm; compatibility should be confirmed against the caliper jaw profile. Does the insert include a calibration certificate? This accessory is supplied as a measuring jaw insert; no dedicated calibration certificate is included unless explicitly stated on the product page. What advantages does carbon‑fibre offer for measurement jaws? Carbon‑fibre reduces mass while maintaining rigidity, improving handling speed and reducing bending during contact, which benefits repeatability for workshop checks. Can the insert be used for internal measurements as well as external? The design primarily addresses external measurement tasks, though the overall geometry may support certain internal measurement workflows when paired with a suitable caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Insert for Internal Groove Measurement for Digital Carbon Fibre Caliper, 8mm Jaw Thickness - Metav IndustryLine
Take advantage of precise internal groove measurement with a lightweight, carbon-fibre construction and straightforward compatibility with digital workshop calipers; the accessory ensures stable readings in confined spaces. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. M217.367 — Insert for internal-groove measurement, 100 mm, carbon-fibre (Metav IndustryLine) A M217.367 insert engineered for accurate internal groove measuring on digital workshop calipers, offering a 100 mm measuring length and compatibility with 8 mm jaw thickness. 100 mm measuring insert for internal grooves Carbon-fibre construction for low thermal drift Compatible with calipers having 8 mm jaw thickness Lightweight 0.2 kg for easy handling Precision where space is limited The accessory converts a standard caliper into a specialised tool for internal groove measurement, enabling reliable checks in narrow bores and channels. Built from carbon-fibre, the insert reduces thermal expansion compared with metallic alternatives, which supports measurement stability during routine workshop use. With a 100 mm measuring length, the component is particularly suited to confined workpieces where repeatable positioning matters. The lightweight design keeps inertia low and simplifies one-person operation while maintaining a steady reference for the caliper sensor. Designed for repeatable workshop measurements The adapter fits to digital universal workshop calipers with a jaw thickness of 8 mm, providing a solid mechanical interface that keeps alignment consistent across successive measurements. Its 0.2 kg mass combines handling convenience with enough substance to avoid unwanted movement during contact measurement. Being an accessory for digital calipers, the part preserves the display resolution and electronic readout of the host instrument, allowing the user to retain the precision benefits of electronic measurement without adapting the measuring routine. Practical integration into quality workflows Classified for compact, micro-range applications up to 100 mm, this insert is ideal for workshop quality control tasks where internal grooves, slots and recesses must be verified quickly and reliably. The accessory supports straightforward inspection routines and fits seamlessly into inspection benches and portable measuring setups. For production environments that demand reproducible checks of groove geometry, the combination of carbon-fibre construction and purpose-shaped measuring faces reduces environmental influence and helps standardise results across shifts. For groove-specific measuring tasks, choose the Metav IndustryLine M217.367 insert and contact Metav Werkzeuge in Emmerich for tailored advice or ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M217.367 GTIN: 4054469183275 Manufacturer: Metav IndustryLine Facts Measuring length: 100 mm Measuring range minimum: 50 mm Weight: 0.2 kg Jaw thickness compatibility: 8 mm Width: 16 mm Special features Carbon-fibre construction Application: internal measurement Suitable for digital workshop calipers Category: workshop caliper accessory FAQ How is the insert mounted to a caliper? The M217.367 insert is designed to sit on calipers with an 8 mm jaw thickness, forming a secure mechanical interface that aligns the measuring faces for internal groove checks. Can the insert remain attached during general measurements? The accessory is intended for dedicated internal groove tasks; while attachment is mechanically stable, removal is recommended when performing standard outside measurements to avoid interference. Which caliper types are compatible with this accessory? Compatibility is with digital universal workshop calipers featuring an 8 mm jaw thickness; the insert preserves the caliper’s electronic readout and measuring functionality. Is the insert suitable for measuring deep slots and narrow grooves? Yes, the 100 mm measuring length and narrow profile make the accessory suitable for confined grooves and slots where direct access is limited. Does the carbon-fibre construction affect measurement stability? Carbon-fibre reduces thermal expansion compared with many metals, supporting more stable results in varying workshop temperatures when used with the caliper’s electronic display. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Outside Measurement Tip Attachment For Carbon Fiber Digital Caliper, For 8mm Beak Thickness - Metav IndustryLine
Extend caliper reach with a 100 mm external measuring point that fits a jaw thickness of 8 mm and weighs just 0.2 kg; the result is improved access to small external features and steadier handling during repetitive checks. Order the attachment directly via Metav Werkzeuge or consult our specialists for application advice. M217.365 External measurement point attachment, 100 mm — Metav IndustryLine The M217.365 is a 100 mm external-measurement tip attachment for digital universal calipers, designed to access small outer diameters and features where a pointed contact is required. 100 mm measuring tip for external measurements Compatible with 8 mm caliper jaws Lightweight design, approx. 0.2 kg Reach small features with assured repeatability The precision tip expands the practical use of a workshop caliper without compromising handling: the 100 mm length gives extended reach for recessed or awkwardly positioned external surfaces, while the pointed end allows contact with narrow profiles and small radii. Fitting as an accessory to a digital universal caliper, the attachment makes previously difficult measurements straightforward, reducing repositioning and the associated variability. The focused design supports efficient measuring routines in assembly and inspection tasks where speed and repeatability matter. Easy integration and balanced handling for everyday use Designed to seat on caliper jaws with a 8 mm thickness, the attachment mounts quickly and remains stable throughout manual measurements. At just 0.2 kg, the accessory minimises added mass and prevents excessive cantilevering that could otherwise affect measurement stability. The simple mechanical interface keeps the digital display behaviour unchanged, so measurement readouts remain the authoritative source. This combination of compatibility and light construction aids productivity in busy workshops and on the shop floor. Workshop-ready accessory that complements digital calipers As a purpose-made external measurement tool for workshop calipers, the attachment is tailored to practical trade use: it is compact to store, quick to fit, and focused on a single function—precise external contact with a pointed tip. For operations that rely on rapid checks or need an occasional extended reach without purchasing a longer main caliper, this accessory provides a cost-effective option. The Metav IndustryLine origin signals supply chain reliability and a European quality filter that supports consistent availability and dependable service. Contact Metav Werkzeuge today to specify the right attachment for the calipers in use or to discuss fitting options for your measuring setup Technical Data SKU: M217.365 GTIN: 4054469183251 Manufacturer: Metav IndustryLine Facts Total length: 100 mm Weight: 0.2 kg Suitable jaw thickness: 8 mm Special features Application: external measurement with pointed tip Compatible with digital universal calipers made of carbon fibre Category: workshop caliper accessory FAQ Is the attachment compatible with standard digital calipers? The attachment is designed for use with digital universal calipers and fits jaws with a thickness of 8 mm; compatibility with a specific caliper model should be checked against the jaw profile and fixing method. Which measurement tasks is the tip intended for? The pointed tip is intended for external measurements on narrow edges, small diameters and recessed outer features where a standard jaw face would not reach; the 100 mm length provides added access without replacing the main caliper. How is the attachment mounted and secured? Mounting is mechanical to caliper jaws of 8 mm thickness; the design keeps the digital readout functionally unchanged while providing a stable contact point for external checks. Does this accessory affect the caliper's accuracy? The accessory provides a precise contact point, but overall measurement accuracy depends on the base caliper and the measuring procedure. The attachment is an aid to access and repeatability rather than a standalone calibrated instrument. What are the identifying codes for ordering? Order reference: SKU M217.365; GTIN 4054469183251. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
105mm Three-Point Replacement Tips Ø12mm Carbide For Rod Calipers From 500mm - Metav IndustryLine
Take advantage of the combination of carbide wear resistance, precise Ø 12 mm mounting and a 105 mm reach to restore reliable contact on large calipers; order the replacement tips directly via Metav Werkzeuge or consult our specialists for fitment advice. Replacement Tips for Bar-Divider Calipers (M201.175.1) – Carbide, 105 mm, Ø 12 mm (Metav IndustryLine) A set of Replacement Tips for Bar-Divider Calipers (M201.175.1) intended to renew contact points on calipers with measuring ranges from 500 mm, designed for workshop and industrial metrology applications Carbide tips for extended wear resistance 105 mm length for deep measurements Ø 12 mm shank for secure mounting Compatible with M201.175–M201.178 Restore accurate contact on large-range calipers Replacement contact points made from carbide deliver consistent repeatability for large-scale measurements. Installed on calipers with a measuring range classified as large-range (500–1,000 mm), the hardened tips resist wear that otherwise degrades measurement reliability over time. The result is a measurable reduction in rework and fewer out-of-tolerance parts during quality inspections, making the changeover a cost-effective maintenance action for production lines and metrology benches. Reach and stability where it matters The 105 mm length provides additional reach for recessed features and deep bores while maintaining a stable contact geometry. A Ø 12 mm mounting shank gives a precise fit into the holder, reducing play and ensuring reproducible seating pressure. Compatibility with the caliper series M201.175–M201.178 is specified to simplify selection; technicians benefit from a straightforward replacement that restores original contact geometry without modifications to the instrument. Workshop-ready durability and straightforward upkeep The empirically proven hardness of carbide ensures low abrasion under repeated use, which extends service intervals and keeps downtime to a minimum. These replacement tips are a practical maintenance item for metrology equipment used in toolmaking, fixture assembly and machine shops, and they support the reliable transfer of dimensional data during routine inspections. Replacement is performed quickly with basic tooling, enabling calibration cycles to continue with minimal interruption. Contact Metav Werkzeuge to confirm compatibility with specific calipers and to request ordering advice for Metav IndustryLine carbide replacement tips. Technical Data Article number: M201.175.1 GTIN: 4061905053610 Facts Length: 105 mm Shank diameter: Ø 12 mm Weight: 0.1 kg Special features Material: carbide Compatible with: M201.175–M201.178 Application: calipers from 500 mm measuring range FAQ How do these replacement tips improve measurement repeatability? The carbide composition of the replacement tips increases surface hardness and wear resistance, so the Replacement Tips for Bar-Divider Calipers (M201.175.1) preserve contact geometry and improve repeatability over prolonged use. Are these tips compatible with my caliper model? Compatibility is specified as M201.175–M201.178; for other models, Metav IndustryLine replacement tips should be checked against the shank diameter and holder design before purchase. Can these tips be used for internal and external measurements? The contact geometry of the replacement tips supports both internal and external contact tasks commonly encountered on larger calipers in workshop metrology. Is a special calibration needed after replacing the tips? After mechanical replacement, a quick functional check or calibration is recommended. If formal calibration is required, follow the established calibration procedure applicable to the measuring instrument. What advantages does the Ø 12 mm shank provide? A Ø 12 mm shank ensures a secure fit in compatible holders, reducing lateral play and improving the stability of the contact point during measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Bore Distance Measuring Insert Conical Measuring Faces For Digital Uni Caliper Series 240.201-240.205 - Metav IndustryLine
Benefit from reliable bore‑centre readings thanks to the Ø 10 mm cone measuring faces and the stainless steel construction that ensures repeatable contact and corrosion resistance; order the insert directly via Metav Werkzeuge or ask our consultants for fitment guidance. Bore‑centre measuring insert Ø 10 mm — cone measuring faces for Digital Uni calipers (Metav IndustryLine) The Bore‑centre measuring insert Ø 10 mm is designed to extend a Digital Uni caliper into a specialised tool for measuring centre‑to‑centre distances of bores, combining compactness with workshop robustness. Cone measuring faces for bore‑centre checks Diameter Ø 10 mm for standard bores Corrosion‑resistant stainless steel Precise bore‑centre readings without added complexity This measuring insert converts a standard caliper into a stable gauge for bore‑centre evaluations by using cone measuring faces that seat reliably inside circular bores. The conical contact geometry centres the probe automatically, reducing lateral play and enabling repeatable measurements when paired with a compatible digital caliper. Because the accessory is machined from stainless steel, the contact surfaces retain shape under routine shop use and resist corrosion, which preserves measurement consistency over time. Seamless integration with Digital Uni calipers Fitting the insert to the intended Digital Uni caliper series 240.201–240.205 is straightforward: the accessory is a compact extension that uses the caliper’s jaws or mounting point to establish a fixed reference line between two bores. The cone ends provide defined points of contact inside holes, so the caliper’s linear readout translates directly into centre‑to‑centre distances without complex calculations. This approach leverages the caliper’s native resolution and user familiarity, maintaining procedural efficiency in inspection routines and small‑lot production checks. Robust design for everyday workshop use At a small mass and compact length, the insert is easy to handle and store while still offering the rigidity required for practical measurements. The stainless steel body resists wear from repeated seating in bores and simplifies cleaning after machining operations. The compact profile and modest weight improve operator handling and reduce the risk of inadvertent deflection during measurement, supporting consistent data capture across multiple parts and shifts. For compatibility confirmation and to obtain the M240.252 bore‑centre measuring insert with Ø 10 mm cone faces from Metav IndustryLine, contact Metav Werkzeuge GmbH by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on fitment and delivery options. Technical Data Article number: M240.252 GTIN: 4061905053849 Material: Stainless steel Weight: 0.05 kg Length: 44 mm Diameter: 10 mm Compatibility: Digital Uni caliper series 240.201–240.205 Facts Diameter: 10 mm Length: 44 mm Weight: 0.05 kg eClass: 21170324 Special features Cone measuring faces for bore‑centre measurement Corrosion‑resistant stainless steel Compact, lightweight accessory for caliper‑based checks Intended for caliper attachment to measure centre distances FAQ How does the insert measure bore‑centre distances? The M240.252 bore‑centre measuring insert seats its cone measuring faces inside holes so that the caliper’s linear travel reads the distance between the cone apices, converting directly to centre‑to‑centre values. Which calipers is this accessory compatible with? The insert is designed for the Digital Uni caliper series 240.201–240.205; compatibility with other models depends on the caliper’s jaw geometry and mounting arrangement. What material is the insert made from and why does that matter? The accessory is manufactured from stainless steel, which provides wear resistance and corrosion protection to preserve dimensional integrity and repeatability during regular workshop use. Is the insert suitable for bores other than 10 mm? The Ø 10 mm cone faces are optimised for bores around that diameter; they can function in slightly larger or smaller holes, but for best repeatability the bore should allow the cone to seat concentrically. Will using the insert change measurement accuracy compared with the caliper alone? The insert transfers the caliper’s linear measurement to a bore‑centre application; actual accuracy therefore depends on the caliper’s resolution and the operator technique, while the cone geometry improves centring and repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1250mm Workshop Caliper 0.05mm Resolution Monoblock Stainless Steel Matt Chrome Scale Fine Adjustment, Supplied in Case - Metav IndustryLine
Take advantage of the combination of long-range measurement capability, a rigid monoblock construction and fine vernier control for dependable workshop dimensioning; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.351 — 1,250 mm monoblock caliper, hardened stainless steel The Workshop Caliper M201.351 is a long-range, monoblock analogue caliper engineered for large workshop and fixture measurements, combining robust construction with precise vernier reading for reliable, repeatable checks. *Monoblock design for high rigidity *1,250 mm measuring range for long parts *Stainless hardened construction with matt chrome scale *Fine adjustment and 0.05 mm vernier resolution Built for long-span workshop measurements with minimal flex The instrument is designed as a monoblock caliper with a cross-section of 31 x 10 mm, which increases profile stiffness across its full length and reduces deflection when measuring long or heavy components. Classified in the Long range (1,000–2,000 mm), the 1,250 mm measuring span suits large assemblies, fixtures and profiles where single‑pass checks improve throughput. The substantial jaw geometry and monoblock beam support reproducible positioning, making this tool a practical choice for heavy‑duty workshop measurement tasks. Analogue precision that meets workshop standards This analogue instrument employs vernier scales (1/128" on the top scale and 1/20 mm on the bottom scale) to provide a readable resolution of 0.05 mm, matching industrial expectations for mechanical calipers. With a jaw length of 200 mm, the measuring faces and vernier comply with DIN 862, ensuring measurement behaviour conforms to recognised workshop standards. The integrated fine adjustment mechanism enables controlled closing of the jaws for repeatable readings, while the matt‑chromed scale reduces glare and facilitates accurate visual interpretation. Durable materials, ergonomic handling and safe transport Constructed from stainless steel that has been hardened, the caliper is finished with a matt chrome graduation for long term legibility and resistance to workshop wear. The 200 mm jaw length balances reach and handling: long enough for many workpieces yet short enough to remain manageable for single‑person use. Delivery in a transport case provides protection during storage and transit, and the robust beam profile supports frequent daily use in metalworking environments. Routine care—light lubrication of the slide and clean storage in the supplied case—preserves measurement integrity. Contact Metav Werkzeuge to discuss integrating the M201.351 monoblock long-range caliper into your inspection routine or to request delivery and technical details from our Emmerich warehouse Technical Data Article number: M201.351 GTIN: 4054469182315 Brand: Metav IndustryLine Facts Measuring range: 0–1,250 mm Jaw length: 200 mm Cross-section: 31 x 10 mm Resolution: 0.05 mm Vernier scales: 1/128" (top), 1/20 mm (bottom) Applicable standard: DIN 862 (jaw length 200 mm) Special features Monoblock beam for increased rigidity Fine adjustment for controlled measurement Material: hardened stainless steel, matt‑chrome scale Supplied in a transport case for safe handling Analogue (vernier) configuration FAQ How accurate is the Workshop Caliper M201.351 for routine inspection tasks? The Workshop Caliper M201.351 provides a vernier resolution of 0.05 mm and, with its DIN 862 conformity at the 200 mm jaw length, is suited to standard workshop accuracy requirements and repetitive dimensional checks. Which measurement tasks can be performed with this caliper? This analogue caliper performs external, internal and step measurements using the jaw faces and stepped surfaces; the fine adjustment aids precise closure for repeatable external readings. Is the M201.351 suitable for heavy workshop environments? Yes. The monoblock construction and hardened stainless steel beam are designed to withstand daily use in metalworking shops and fixture assembly areas while maintaining dimensional stability over long spans. Does the caliper come with a calibration certificate? The product data do not indicate an ISO 17025 calibration; please contact Metav Werkzeuge if a traceable calibration certificate is required for the Workshop Caliper M201.351. What protective measures are included for transport and storage? The caliper is supplied in a transport case to protect the beam and jaws during handling and storage; regular cleaning and light lubrication are recommended to maintain the scale and sliding surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digital Caliper Carbon Fibre Inductive System Replaceable Jaw Spring-Loaded Thumb Wheel IP65 - Metav IndustryLine
Take advantage of the combination of long-range reach, low-deflection carbon fibre construction and robust IP65 protection for reproducible measurements on large components; order the Digital Uni. Caliper M217.362 directly via Metav Werkzeuge or ask our consultants if needed. Digital Universal Caliper M217.362 — 1,500 mm carbon fibre, IP65 The Digital Universal Caliper M217.362 is a long-range, inductive workshop caliper designed for reliable measurements of large assemblies and tooling up to 1,500 mm. Carbon fibre 1,500 mm beam for low deflection IP65 dust- and splash-resistant design Inductive measuring system with RB6 data output Removable jaw and spring-loaded thumbwheel Reproducible measurements across long spans This long-range instrument is engineered for measurements up to 1,500 mm, placing it in the Long category for calipers. The inductive measuring system provides stable sensing along the entire beam, reducing the influence of contamination that affects mechanical readers. With a display resolution of 0.01 mm, operators gain clear, comparable values for external and internal dimensions on large components; this supports process consistency in fixtures, housings and large assemblies where repeatability matters. Lightweight stiffness and workshop resilience The beam is manufactured from carbon fibre, which combines low mass with high stiffness to limit sag over the full measuring length. Together with the IP65 rating, this construction means the instrument tolerates workshop environments while remaining easy to handle during two-person measurements or when mounted on supports. A removable jaw allows replacement or specialised jaw types, and the spring-loaded thumbwheel ensures gentle, consistent closing force to cut measurement variation caused by operator pressure. Clear results and industrial connectivity The caliper’s digital display supports mm/inch, Hold, Set, On/Off, 0/Inch and Data functions for versatile use; the 0.01 mm step size ensures readable resolution for workshop quality checks. Data are made available via RB6 output for direct logging into inspection systems or data collectors, while power is supplied by a 3 V CR 2032 cell for long service life between battery changes. Delivered in a transport case, the instrument is protected during storage and transfer, simplifying workshop logistics. Choose Metav IndustryLine’s carbon-fibre long caliper for consistent, low-deflection measurements over large parts — contact Metav Werkzeuge in Emmerich for personalised advice or to request a quote. Technical data Article number: M217.362 GTIN: 4054469183220 ECLASS: 21170344 Facts Measuring range: 0–1,500 mm Resolution (display): 0.01 mm Accuracy: 0.11 mm Jaw length: 100 mm Power supply: 3 V CR 2032 Special features Material: carbon fibre beam Protection: IP65 Measuring system: inductive Data output: RB6 Display functions: mm/inch, Hold, Set, On/Off, 0/Inch, Data Removable measuring jaw Spring-loaded thumbwheel Delivered in transport case FAQ What measuring range does the caliper cover? The Digital Universal Caliper M217.362 covers 0–1,500 mm and is classified as a long-range caliper suitable for large components and tooling. Is the instrument suitable for workshop use and humid environments? Yes — the carbon fibre beam combined with an IP65 rating provides resistance to dust and splashes, making it appropriate for standard workshop conditions. How can measurement data be transferred to a PC or logger? Data are exported via the RB6 output; the caliper uses an inductive measuring system that supports reliable digital transfer to compatible data collectors. Which display functions are provided for everyday measuring tasks? The instrument includes mm/inch switching, Hold, Set, On/Off, 0/Inch and Data buttons for flexible operation, with a display resolution of 0.01 mm; it is powered by a 3 V CR 2032 battery. Can the measuring jaw be replaced or adapted for special tasks? Yes, the product features a removable measuring jaw and a spring-loaded thumbwheel to enable jaw replacement and to ensure consistent contact force during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm DataMet E‑Force Precision Caliper 0.0005mm Resolution, Force Control 1–20N, Wireless + USB, ISO 17025 Calibration - Microtech Metrology
Take advantage of Industry 4.0 connectivity and force‑controlled measurement for reproducible results, combined with a Swiss reading system and an ISO 17025 calibration certificate for traceable quality — order the caliper via Metav Werkzeuge or ask Metav's consultants for integration support. DataMet eFORCE caliper — force‑controlled precision (1–20 N) with 0.0005 mm resolution by Microtech Metrology The DataMet eFORCE caliper is an Industry‑ready electronic caliper for workshop and QC use, combining a Swiss high‑resolution measuring system with force control and wireless data transfer for efficient measurement workflows Industry 4.0-ready Wireless data transfer Force-controlled measurement 1–20 N Swiss reading system 0.5 µm resolution ISO 17025 calibration certificate included Precision and repeatability that reduce rework The caliper pairs a Swiss reading system with an ultra‑fine 0.0005 mm resolution to deliver consistently detailed readings. Integrated E‑Force measurement control (selectable 1–20 N and AUTO‑Force) removes a major source of variability by stabilising contact force, which improves repeatability and reduces operator‑dependent scatter. With a stated accuracy ±0.005 mm, the instrument is suitable for demanding workshop metrology and routine quality checks where tight tolerances are required. Seamless data flow for modern production Connectivity is designed for practical integration: both Wireless transfer to the MDS app and USB HID emulation (including MAC support) allow measured values to be captured directly in spreadsheets and inspection software. A built‑in memory manager stores 2000 values with folder structure and statistics, and the hi‑res 2.0" colour touchscreen gives clear visual feedback. Combined, these functions speed up documentation, reduce transcription errors and support Industry 4.0 data routines on the shop floor. Robust construction for everyday use Constructed from stainless steel with hand‑finished measuring faces and a surface finish of Ra<0.32 µm, the caliper withstands daily workshop handling while maintaining surface quality at contact points. The instrument falls into the Standard (100–300 mm) category thanks to its 0–150 mm measuring range, offering the best compromise between reach and rigidity for general machine‑shop and metalworking tasks. Power is provided by a rechargeable Li‑Pol 500 mAh cell with a USB‑C data/charging port for convenient top‑ups between shifts. Traceability, calibration and measurement integrity A full ISO 17025 calibration certificate (Ilac MRA) is included, supplied with the delivery set so that the measuring instrument can be introduced into documented inspection routines straight away. The caliper supports linear correction and temperature correction, and external jaw accuracy plus internal‑jaw and depth verification reference the ISO13385‑1 standard, enabling integration into formal QA processes with documented traceability. For detailed technical advice or to place an order for the Microtech Metrology DataMet eFORCE caliper contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 — Metav's specialists will assist with specification and delivery. Technical Data Article number: 141088015A Product name: DataMet eFORCE caliper 0–150 mm Manufacturer: Microtech Metrology Delivery set: Messwerkzeug; Free Versions of MDS App; USB Data/Charging Cable; Calibration Protocoll Calibration: ISO 17025 (Ilac MRA) certificate included Numbers Measurement range: 0–150 mm Resolution: 0.0005 mm (0.5 µm) Accuracy: 0.005 mm Force selection: 1–20 N Battery capacity: 500 mAh Jaw lengths: 40/16 mm Memory capacity: 2000 values Special features Industry 4.0 DataMet E‑Force system 2.0" colour touchscreen Swiss-made reading system Functions: Analog Scale; Preset; Graphic; Go/NoGo; Max/Min; Formula; Timer; Linear correction; Temperature correction; Resolution select; Connection indication Memory manager with folders, statistics, data transfer Wireless to MDS app; Wireless HID; USB HID (MAC support) Stainless steel; hand-finished measuring surfaces Ra<0.32 µm Rechargeable Li‑Pol battery; USB‑C socket External jaws accuracy; internal jaws and depth per ISO13385‑1 FAQ What measurement range and resolution does the instrument offer? The caliper measures from 0–150 mm with a selectable 0.0005 mm (0.5 µm) resolution; this is specified for the Microtech Metrology DataMet eFORCE caliper (SKU 141088015A). How does the E‑Force module improve repeatability? E‑Force sets and displays a controlled measuring force (1–20 N) and includes an AUTO‑Force mode, which standardises contact pressure and reduces variability in repeated measurements with the DataMet eFORCE caliper. Which data transfer options are provided for recording measurements? DataMet eFORCE supports Wireless transfer to the MDS app, Wireless HID keyboard emulation, and USB HID (including MAC compatibility); the device also provides USB‑C for data and charging. Is the caliper delivered calibrated and traceable? Yes — the delivery includes an ISO 17025 calibration certificate (Ilac MRA) and a calibration protocoll, enabling immediate inclusion in traceable QA workflows. For which applications is this caliper best suited? With its Standard range (0–150 mm), stainless steel construction and high resolution, the instrument is ideal for machine‑shop inspection, component measurement and laboratory quality control where reproducible, traceable results are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Gauge With Probe Tip And Removable Measuring Rod 0.05mm Nonius, DIN 862 - Metav IndustryLine
Benefit from dependable 0.05 mm resolution, robust stainless steel construction and an interchangeable measuring rod that adapts to varied depth tasks; order the depth gauge directly via Metav Werkzeuge or consult our specialists for further technical advice. Depth Gauge with Interchangeable Pin Tip M204.063 — 0–150 mm, 0.05 mm Vernier (Metav IndustryLine) The Depth Gauge with Interchangeable Pin Tip M204.063 is an analogue depth gauge designed for standard workshop and machine‑shop depth measurements up to 150 mm, offering a compact, durable solution for precise recess and bore depth checks. 0.05 mm vernier resolution Stainless steel, matt‑chrome scale Interchangeable measuring rod and pin tip Supplied in a transport case Precise depth control for everyday production This analogue instrument delivers a clear metrological advantage through its 0.05 mm vernier, derived from the 1/20 mm nonius. The fine gradation allows repeatable depth readings that meet common workshop tolerances while remaining simple to interpret without electronics. The design combines a rigid depth beam with a slim measuring pin, enabling access to narrow recesses and stepped features. Compliance with DIN 862 guarantees that the gauge matches established mechanical‑engineering standards and fits seamlessly into established inspection routines. Robust handling and corrosion resistance Constructed from stainless steel with a matt‑chrome scale and vernier, the instrument resists workshop contaminants and reduces surface glare for easier reading under workshop lighting. The interchangeable measuring rod and pin tip provide practical adaptability: the rod can be repositioned for different depths or replaced if damaged, avoiding the need for a full tool swap. At around 0.2 kg, the gauge is light enough for single‑hand use yet stiff enough to ensure stable measurements within its standard range. Designed for the workshop: classification and use case With a measuring span to 150 mm, the device falls into the Standard size class (100–300 mm), which is the universal choice for machine shops and metalworking departments thanks to its balanced reach and stiffness. As an analogue vernier instrument, it is particularly useful where electromagnetic interference or battery dependence is a concern, or where a tactile, mechanical feel is preferred for routine quality checks. The measuring kit is supplied ready for use in a transport case, facilitating safe storage and controlled transport between workstations. Specify the Metav IndustryLine depth gauge M204.063 for reliable 0.05 mm depth measurement — contact Metav Werkzeuge in Emmerich for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M204.063 GTIN: 4054469164076 Standard: DIN 862 Type: analogue depth gauge Facts Measuring range: 0–150 mm Resolution (vernier): 0.05 mm Weight: 0.2 kg Tariff code: 90173000 Bridge / beam: 100 mm Special features Stainless steel with scale and vernier, matt‑chrome finish Nonius 1/20 mm (0.05 mm) on lower edge Interchangeable pin tip and measuring rod Standard size class: 100–300 mm Supplied in a transport case FAQ How accurate is the instrument for workshop checks? The depth gauge M204.063 offers a vernier resolution of 0.05 mm, suitable for standard industrial checks and production control within common workshop tolerances. Can the measuring pin be changed for different tasks? Yes, the instrument features an interchangeable measuring rod and pin tip, so the probe can be repositioned or replaced to suit specific depth requirements. Is this gauge suitable for harsh workshop environments? The matt‑chrome finish on stainless steel provides enhanced corrosion resistance and reduces glare, making the gauge robust enough for typical machine‑shop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Absolute Slide With 0.02mm Resolution, IP54 Plastic Case - Metav IndustryLine
Combining 0.02 mm accuracy with IP54 protection and an absolute measuring system provides dependable workshop measurements and consistent quality control; order the instrument directly via Metav Werkzeuge or request advice from our consultants. Digital Caliper 150 mm, IP54 (DIN 862) — Metav IndustryLine The Digital Caliper 150 mm, IP54 (DIN 862) is a compact, workshop-ready absolute caliper for precise external, internal, depth and step measurements in standard machining environments. IP54 protection for dusty and damp environments Absolute measuring system with 0.02 mm accuracy Stainless steel construction with glass scale RB 6 data output for digital integration Robust accuracy for everyday metrology This caliper delivers 0.02 mm accuracy on an absolute measuring system, a combination that gives reliable, repeatable readings across routine inspection tasks. The stainless steel body with a glass scale resists wear while maintaining stable guidance, so measurements remain consistent over time. Built to the DIN 862 standard, the instrument suits general metalworking and maintenance use where a balance of reach and stiffness is required. Clear digital readout and data connectivity The instrument features a digital display with on/off, 0/ABS, mm/inch and Origin controls for intuitive operation. A RB 6 data output permits straightforward connection to data loggers or inspection software, enabling traceable records and faster quality workflows. The display resolution and measurement logic reduce interpretation errors, which speeds up checking procedures and supports process documentation in production environments. Four measurement modes and practical handling Equipped for four-fold measurement (external, internal, depth and step), the caliper replaces several single-purpose gauges, saving bench space and simplifying inspection sequences. The compact 150 mm format is classified in the standard range for workshop calipers, offering an optimal compromise between reach and rigidity that enhances single-hand handling and repeatable results for typical machine‑shop components. Durable protection and transport convenience With IP54 ingress protection and delivery in a protective case, the device withstands workshop conditions and is safer to store and transport between job sites. The lightweight construction (approx. 0.4 kg) and secure jaws reduce operator fatigue during repeated checks, while the battery-powered electronics (3 V CR2032) keep downtime to a minimum. For workshop-ready precision with robust protection, request the Metav IndustryLine Digital Caliper M216.255 from Metav Werkzeuge GmbH or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification support Technical Data Article number: M216.255 GTIN: 4054469182551 Eclass: 21170344 Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution / display: 0.02 mm Accuracy: ±0.02 mm Weight: 0.4 kg Battery: 3 V CR 2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: Absolute Measurement modes: external, internal, depth, step Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, Origin button Delivered in protective case for transport FAQ Is the caliper suitable for workshop environments with splash and dust? The Digital Caliper 150 mm meets IP54 and is designed for dusty and damp workshop conditions, providing protected operation without compromising accuracy. Can measurement data be exported to inspection software? Yes. The instrument includes a RB 6 data output for direct connection to data loggers or PC systems to streamline record keeping. Which measurement types are possible with this caliper? This caliper supports four measurement tasks: external, internal, depth and step measurements, covering most routine inspection needs. What is the display resolution and typical accuracy? The digital readout displays at 0.02 mm resolution, with an accuracy of ±0.02 mm, suitable for standard machine‑shop quality control. Is the caliper supplied ready for transport and storage? The tool is supplied in a protective case for safe transport and workshop storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Fibreglass Large 16mm Display 0.1mm Resolution Battery Powered Blister Pack - Metav IndustryLine
Take advantage of the combination of clear large-digit readout, fibreglass lightness, and workshop‑grade 150 mm range for efficient, repeatable checks on everyday components; order directly via Metav Werkzeuge or consult the specialists for application advice. Digital caliper M216.073 by Metav IndustryLine — 150 mm, fibreglass, 0.1 mm resolution Digital caliper M216.073 offers a compact, easy-to-read measuring solution for routine workshop tasks and quality checks across general metalworking and maintenance applications. Fibreglass body, corrosion resistant 150 mm measuring range 0.1 mm digital resolution Large 16 mm high-contrast digits Clear legibility for fast inspection and fewer errors The instrument features a large 16 mm digit height on the display, which significantly reduces reading time in busy production or maintenance environments. Combined with a straightforward digital interface — including ON/OFF, ZERO and mm/inch functions — the device streamlines routine dimension checks. The 0.1 mm resolution positions this caliper for standard workshop accuracy, making it suitable for general machining and assembly tasks where rapid, unambiguous readings are more important than micrometre-level precision. This balance of readability and sufficient accuracy supports quicker decision‑making on the shop floor and reduces the risk of rework caused by misreading small displays. Lightweight fibreglass design that withstands daily use Constructed from fibreglass, the gauge remains exceptionally light (approx. 0.1 kg) while offering good resistance to corrosion and everyday knocks. The material choice lowers operator fatigue during repetitive measuring routines and enables safe use in environments where metal calipers could mark soft surfaces. The instrument’s 150 mm range places it in the standard caliper category, which is the most versatile size for workshops: it combines reach, stiffness and single‑hand handling for measurements on shafts, housings and interfaces commonly encountered in production and repair work. The compact form factor and blister packaging facilitate tidy storage and straightforward distribution within tools cupboards. Practical controls and ergonomic handling to increase throughput Ergonomic jaw geometry with a beak length of 40 mm provides stable contact for external and internal measurements, while the simple digital control scheme reduces training time for new operators. The lightweight slider and intuitive button layout enable swift zeroing and unit changes, improving throughput during repetitive inspection cycles. The caliper is supplied with basic workshop calibration and is targeted at organisations seeking reliable, low‑maintenance tools for standard quality control tasks. Integration into daily workflows is straightforward, and the device complements a broader toolset from Metav IndustryLine for centralised procurement and consistent performance across the shop. For straightforward, readable workshop measurement from Metav IndustryLine, order the M216.073 through Metav Werkzeuge or request tailored application advice by phone or e‑mail — Metav’s specialists in Emmerich are ready to assist. Technical Data Article number: M216.073 GTIN: 4054469182834 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.1 mm Digit height: 16 mm Weight: 0.1 kg Beak length: 40 mm Voltage: 3 V Special features Material: fibreglass Display: ON/OFF, ZERO, mm/inch Packaging: blister pack Suitable category: Standard caliper (100–300 mm range) SKU: M216.073 FAQ Is this caliper suitable for precision workshop checks? The Digital caliper M216.073 delivers 0.1 mm resolution and a 150 mm range, which suits standard workshop and assembly inspections where rapid, reliable readings are required rather than sub‑micrometre measurement. What materials is the caliper designed to cope with? The fibreglass construction of the M216.073 is corrosion resistant and robust for everyday handling; it is appropriate for general metalworking and maintenance tasks but is not intended as a replacement for metrology‑grade instruments on high‑precision materials. Does the display offer both metric and imperial units? Yes, the instrument provides mm/inch conversion via the dedicated display button to support mixed workflows and simplify documentation across projects. Is a calibration certificate included? The tool is supplied with standard workshop calibration suitable for routine quality control. If a higher level of traceable certification is required, Metav Werkzeuge can advise on appropriate calibrated solutions. What power source does the caliper use and how long does it last? The caliper operates from a 3 V cell. Actual service life depends on usage patterns and switch‑off behaviour; the ON/OFF control is provided to preserve battery life during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper IP67 With Auto Shutoff, INC/Zero/Hold Buttons, Stainless Hardened Steel, Four‑Function Measurement, Supplied In Case - Metav IndustryLine
Combine robust ingress protection, a 0.01 mm display resolution and a hardened stainless steel construction for dependable, repeatable measurements on the shop floor; the result is consistent component inspection and fewer reworks. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice and supply options. Digital Caliper 150 mm M216.161.D – IP67 protection, 0.01 mm resolution (Metav IndustryLine) The Digital Caliper 150 mm M216.161.D is a compact, workshop-grade measuring instrument designed for general machining and quality control tasks where resilience and clear readout are essential. IP67 protection against dust and water Hardened stainless steel construction 0.01 mm resolution, ±0.02 mm accuracy Four measuring functions: inner, outer, depth, step Built for wet and dusty workshop conditions The instrument’s IP67 rating ensures reliable operation even where coolant mist, swarf or dust are present; this reduces measurement interruptions and extends service life compared with non-sealed instruments. The frame is made from hardened stainless steel, which provides both corrosion resistance and structural stiffness to keep readings consistent under daily use. Delivered in a transport case, the caliper arrives protected for transit and on-site handling, supporting safe storage between jobs. Accuracy that supports production decisions With a display resolution of 0.01 mm and an accuracy of ±0.02 mm, this caliper meets the expectations of standard precision control in machining and metalworking. The specification follows DIN 862, giving a familiar benchmark for quality assurance. Practically, the resolution and tolerance mean the device is suitable for routine inspection of turned parts, milled components and assembly checks where rapid, verifiable measurements are required rather than sub‑micron laboratory work. Versatile measuring capability and ergonomic handling Equipped for four measuring functions — outer, inner, depth and step — the caliper replaces several single‑purpose gauges and streamlines workflow. The digital display includes tactile buttons (INC, MODE, HOLD and ON/OFF) for straightforward operation, and an automatic shut-off feature preserves the CR2032 battery during intermittent use. The instrument’s jaw length and profile suit common workshop tasks while remaining easy to manipulate for one‑handed measurements. Practical benefits for procurement and daily use Classified in the Standard size group (measurement range to 150 mm), the tool offers the best compromise between reach and rigidity for general workshop needs; typical applications include machine shops, maintenance departments and metal fabrication. The sealed electronics are advantageous where intermittent wetting occurs, and the hardened material minimises wear on contact surfaces for longer service intervals. The result is lower total cost of ownership through fewer replacements and less downtime. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine caliper into your inspection workflow or to arrange delivery from Emmerich: +49 2822 7131930, info@metav-werkzeuge.com Technical Data Article number: M216.161.D GTIN: 4054469182919 Brand: Metav IndustryLine Standard: DIN 862 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Weight: 0.4 kg Protection class: IP67 Battery: 3 V CR2032 Special features Material: hardened stainless steel Four measuring functions: outer, inner, depth, step Digital display with INC, MODE, HOLD and ON/OFF buttons Automatic shut-off Delivered in a transport case (plastic or wooden depending on logistics) FAQ What is the usable measurement range of the caliper? The Digital Caliper 150 mm M216.161.D provides a measurement range of 0–150 mm, placing it in the Standard category for workshop use. How precise is the instrument for routine checks? Resolution is 0.01 mm with an accuracy of ±0.02 mm, which is suitable for standard machining tolerances and quality control tasks. Can the caliper be used in damp or dirty environments? Yes, the device has an IP67 rating, meaning the electronics are sealed against dust and temporary immersion, making it robust for harsh workshop conditions. Which measuring tasks does this caliper perform? The caliper supports outer, inner, depth and step measurements, offering four measuring functions that cover most general inspection requirements. Is a calibration certificate supplied with the caliper? A calibration certificate is provided only if explicitly specified; standard factory settings apply unless a particular calibration option is requested at purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With 1.6mm Round Depth Rod, IP67, 0.01mm Resolution, Four-Function, Stainless Hardened - Metav IndustryLine
Take advantage of a robust, workshop-ready instrument that combines IP67 protection, a 0.01 mm digital resolution and hardened stainless steel construction for reliable results in everyday quality control. The unit’s 150 mm measuring range and round depth rod (1.6 mm) make it a practical Standard-class caliper for machine shops; order directly via Metav Werkzeuge or consult the Metav team for application advice. Digital caliper 150 mm, IP67 with round depth rod 1.6 mm — Metav IndustryLine The Digital caliper 150 mm, IP67 with round depth rod 1.6 mm is a workshop-grade measuring instrument designed for robust indoor use and precise dimensional checks across machine building and inspection tasks. IP67 protection for dust and water resistance 0.01 mm digital resolution with MODE/SET display Hardened stainless steel construction Four measurement functions: inside, outside, depth, step Consistent accuracy for routine quality control A clear technical advantage of this digital instrument is its 0.01 mm display resolution combined with an indicated measurement accuracy of ±0.03 mm, which aligns with industrial expectations for Standard-range calipers. The 150 mm measuring span places the tool in the Standard category for workshop use, offering a practical balance between reach and rigidity. Compliance with DIN 862 supports reproducible procedures and makes the instrument suitable for incoming inspections, setup checks and day‑to‑day dimensional control where traceable, comparable values are required. Built to withstand the workshop environment The jaws and beam are made from hardened stainless steel, giving the caliper mechanical durability while resisting corrosion in typical production environments. With an IP67 rating, the unit tolerates dust ingress and temporary immersion, reducing the risk of downtime due to contamination or coolant exposure. The slender round depth rod (1.6 mm) permits reliable depth and step measurements in narrow features, while the compact overall weight (approx. 0.4 kg) keeps single‑hand operation comfortable during repetitive measurement tasks. Practical operation and measurement versatility The electronic display features MODE/SET controls for quick unit selection and zeroing, supporting metric and inch readouts (resolution: 0.01 mm / 0.0005 in) and straightforward setup in inspection workflows. The instrument offers four measurement modes — outside, inside, depth and step — which reduces the need to change tools between typical checks. Delivery includes a protective transport case to simplify storage and safe handling between job stations. The overall design emphasises dependable ergonomics and straightforward integration into quality routines. For workshop-grade measurements relying on IP67 protection and precise 0.01 mm readout, choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M216.151.N GTIN: 4054469178844 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm (0.0005 in) Indicated accuracy: ±0.03 mm Weight: 0.4 kg Depth rod diameter: 1.6 mm Special features Material: hardened stainless steel Protection class: IP67 Display: digital with MODE and SET buttons Measurement modes: outside, inside, depth, step Conforms to DIN 862 Supplied in protective case for transport and storage FAQ What measurement functions does the caliper provide? The digital caliper supports four measurement functions — outside, inside, depth and step — enabling versatile checks without changing tools. Is the instrument suitable for use near coolants or in dusty environments? Yes, the unit’s IP67 rating ensures resistance to dust ingress and to temporary immersion, making it robust in many workshop conditions. What level of precision can be expected from this 150 mm caliper? The caliper provides a resolution of 0.01 mm with an indicated accuracy of ±0.03 mm, appropriate for standard machine‑shop inspection work. Does the caliper comply with any measurement standards? The instrument is manufactured to meet the requirements of DIN 862, supporting reproducible metrology procedures in the workshop. What materials and features support durability? Construction in hardened stainless steel, a sealed IP67 design and a protective transport case combine to reduce wear and protect the instrument during use and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With Locking Throttle, mm/inch Display, On/Off And Zero, Four-Function Measurement, Hardened Stainless Steel, Case - Metav IndustryLine
The combination of a 0.01 mm resolution, robust hardened stainless steel construction and reliable moment locking makes this caliper a practical choice for consistent workshop and inspection routines. Order the instrument directly via Metav Werkzeuge or contact our consultants for integration advice. M216.081 Digital Caliper — 150 mm, moment locking (Metav IndustryLine) The M216.081 is a 150 mm digital caliper designed for workshop measurement and quality control, featuring mm/inch readout, zeroing and a moment locking mechanism for repeatable results 150 mm hardened stainless steel frame Digital readout 0.01 mm resolution mm/inch Moment locking for repeatable measurements Four measurement modes: internal, external, depth, step High-precision measurements that support quality decisions This digital caliper delivers a 0.01 mm resolution and is manufactured to DIN 862 guidance, offering the accuracy expected in standard machine‑shop and inspection tasks. The integrated moment locking holds the slider at the chosen position, reducing variation caused by hand pressure and improving repeatability when transferring measurements between workpiece and documentation. The instrument supports four measurement modes — internal, external, depth and step measurement — enabling a single tool to cover routine dimensional checks without frequent tool changes. These features translate directly into faster inspection loops and fewer reworked parts. Built for everyday workshop robustness and handling Constructed from hardened stainless steel, the caliper tolerates workshop environments while resisting corrosion for long service life. The jaw geometry (40/21 mm) provides sturdy contact for both outside and inside measurements, and the instrument’s compact mass of 0.48 kg keeps handling comfortable during extended use. The balanced weight and ergonomic slider ensure steady alignment on longer runs, helping to preserve measurement integrity across batches. This combination of durability and practical ergonomics reduces maintenance overhead and keeps the tool available where it is needed most. Digital connectivity and error‑reducing workflow benefits The instrument features a clear digital readout with on/off, zero and mm/inch switching for straightforward operation and quick unit conversion. A dedicated RB 1 data output allows transfer of measured values into data‑collection systems or SPC software, cutting transcription errors and accelerating reporting. For laboratories and production lines that require traceable records, the ability to export readings directly from the caliper supports consistent documentation. Integrated digital functionality therefore not only speeds measurement tasks but also strengthens process reliability across inspection and production workflows. Contact Metav Werkzeuge for a tailored quotation or technical guidance on the M216.081; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M216.081 GTIN: 4054469168371 Manufacturer: Metav IndustryLine Norm: DIN 862 Data output: RB 1 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Weight: 0.48 kg Jaw length: 40/21 mm Tariff number: 90173000 Special features Material: hardened stainless steel Display: on/off, zero, mm/inch Measurement modes: internal, external, depth, step Moment locking mechanism Digital instrument with data output RB 1 FAQ What accuracy can be expected from this caliper? The M216.081 digital caliper provides a resolution of 0.01 mm and is manufactured to DIN 862, delivering the repeatability and accuracy suitable for workshop quality control. Which measurement types are supported? The instrument supports four measurement modes: external and internal diameters, depth measurement and step measurement, enabling versatile inspection tasks with a single tool. Is the caliper suitable for wet or oily workshop environments? Yes, the hardened stainless steel construction improves resistance to corrosion and wear, making it appropriate for typical workshop conditions where moisture or light contaminants may be present. Can measurement values be exported to a PC or SPC system? Yes, the caliper includes an RB 1 data output that allows direct transfer of readings into data acquisition or SPC software, reducing manual transcription and supporting traceable records. Does the instrument include a locking mechanism for consistent readings? The M216.081 features a moment locking device that secures the slider position, improving repeatability when taking or transferring measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Pocket Caliper Three-Point, 0.01mm Resolution, RS232C Output, Supplied in Case - Metav IndustryLine
Compact, robust and ready for integration: the caliper combines 0.01 mm resolution, a hardened stainless steel construction and an RS232C data interface for reliable shop-floor measurement and simple data logging. Order the digital pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital pocket caliper »Digital‑Taschen‑Messschieber, schwarz« — pocket caliper with RS232 data output A Digital pocket caliper, black, designed for portable precision measuring across workshop and inspection tasks, combining compact format with a clear display and data connectivity. Compact pocket format for mobile measuring 0.01 mm resolution for standard workshop control RS232C output for data logging and traceability Delivered in a transport box for safe storage Precision and portability for routine measurement tasks The compact digital caliper is built to bring reliable, repeatable results to everyday workshop measurement. With a resolution of 0.01 mm and a clear display with 12 mm digit height, read‑outs are quick and unambiguous — reducing reading errors during repetitive checks. The caliper’s hardened stainless steel jaws and beam resist wear and provide mechanical stability; this material choice supports long term dimensional stability and helps maintain calibration intervals. The lightweight design (approx. 0.3 kg) and pocket format make the tool suitable for mobile inspections where access and handling matter. Seamless documentation and integration for quality processes Equipped with an RS232C (RB2) data output, the instrument enables direct transfer of measurement values to data collection systems or inspection software. This connectivity supports quality processes that require traceable records or statistical process control, reducing manual transcription and associated errors. The display features mm/inch toggle and dedicated zero and on/off controls, streamlining measurement workflows and allowing swift switching between unit systems without extra calculation. Versatile measuring functions for common workshop needs This pocket caliper performs four fundamental measurement modes — external, internal, depth and step measurements — so it covers the typical checks required in metalworking and assembly. The combination of a compact jaw geometry and hardened contact surfaces allows access to small features while retaining repeatability. For routine parts inspection and quick setup checks, the instrument provides a practical balance of reach and manoeuvrability. Practical protection and workshop readiness The device is supplied in a transport box for protection during storage and transit, helping prevent knocks and contamination that could affect accuracy. The robust surfaces and compact form factor reduce susceptibility to damage when carried in pockets or toolkits, and the easy‑to-read digits speed up inspection cycles. Where traceability is required, data logging via RS232C simplifies the creation of measurement records without additional adapters. For tailored advice and immediate availability, contact Metav Werkzeuge in Emmerich — Metav’s specialists can confirm stock, compatibility with inspection systems and ordering options for this Metav IndustryLine caliper (SKU M216.086) — call +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data SKU: M216.086 GTIN: 4061905082559 Manufacturer: Metav IndustryLine Facts Resolution: 0.01 mm Display digit height: 12 mm Weight: 0.3 kg Data output: RS232C (RB2) Special features Material: hardened stainless steel Measuring modes: external, internal, depth, step (4‑way measurement) Display functions: on/off, zero, mm/inch Delivery: transport box (plastic or wooden box) FAQ How accurate is the measurement from this digital pocket caliper? The caliper offers a resolution of 0.01 mm, suitable for standard workshop control and routine inspection tasks; accuracy depends on application and handling. Can measurement values be exported directly to a computer? Yes — the unit has an RS232C (RB2) data output for direct transfer of readings to compatible data collection systems. Which measurement types are supported by this caliper? The instrument supports four measurement types: external, internal, depth and step measurements, making it versatile for general workshop use. Is the caliper protected for transport? The caliper is supplied in a transport box to protect the instrument during storage and transit. What material are the jaws and beam made from? The caliper is manufactured from hardened stainless steel, chosen for wear resistance and stability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm External Measuring Jaw Insert For Digital Carbon Fibre Caliper, Compatible With 8mm Jaw Thickness - Metav IndustryLine
Take advantage of the lightweight carbon-fibre construction together with the 150 mm measuring length to speed external measurements while reducing hand fatigue; order the attachment directly via Metav Werkzeuge or ask our consultants if any clarification is needed. External measuring jaw M217.364.2 — 150 mm carbon-fibre attachment for digital universal calipers (Metav IndustryLine) A External measuring jaw M217.364.2 designed as a precision attachment for external measurements on digital universal calipers, offering a light, stiff alternative for routine workshop checks. Carbon-fibre construction, high stiffness 150 mm measuring length for external use Fits calipers with 8 mm jaw thickness Weight 0.2 kg for easy handling Faster, more reliable external measuring in everyday workflows The carbon-fibre construction delivers a high stiffness-to-weight ratio that reduces operator fatigue and improves repeatability during repetitive tasks. By replacing heavier jaws with a carbon-fibre attachment, measurement cycles become more efficient because handling is easier and less brace force is required. The 150 mm length provides a practical reach for common external dimensions while remaining rigid enough to avoid bending under normal workshop use. This results in consistently reproducible measurements and a noticeable reduction in handling time during batch checks. Straightforward fitment and workshop practicality Designed specifically for calipers with a jaw thickness of 8 mm, the accessory mounts cleanly to compatible digital universal callipers and is intended for rapid swap‑out without additional tools. The slim profile and lightweight build make it particularly suitable for technicians who need to switch between internal and external measuring setups frequently; the reduced mass lowers the risk of accidental slippage and helps maintain alignment during contact. Clear mechanical fitment reduces setup time, supporting faster throughput on assembly and inspection benches. Material benefits that support precision and durability The choice of carbon-fibre gives a corrosion‑resistant alternative to metal jaws and maintains dimensional stability under normal workshop conditions. Its low weight contributes to gentler contact forces, which helps preserve delicate surfaces and reduces marking on softer workpieces. The design focuses on practical robustness: a stiff, slim geometry for external measurement combined with a compact footprint that does not obstruct access to confined areas. Where repeatable, low‑effort external gauging is required, this attachment offers a measurable improvement in handling and operator comfort. Contact Metav Werkzeuge for personalised advice on integrating the Metav IndustryLine 150 mm carbon-fibre external measuring jaw into the workshop setup, or to request detailed compatibility confirmation from our specialists in Emmerich. Technical data Article number: M217.364.2 Manufacturer: Metav IndustryLine Category: Workshop calipers accessory Facts Length: 150 mm Weight: 0.2 kg Width: 16 mm Compatible jaw thickness: 8 mm Special features Material: Carbon-fibre Intended use: External measurement (also suitable for internal checking depending on caliper setup) Designed for digital universal calipers Light, stiff construction for repeatable handling FAQ How does this attachment improve everyday measuring tasks? The carbon-fibre 150 mm measuring jaw reduces weight and operator fatigue while maintaining stiffness, so the Metav IndustryLine jaw helps achieve more consistent external measurements during repetitive checks. Is the jaw compatible with my caliper? Compatibility requires a jaw thickness of 8 mm; the M217.364.2 is specified to fit digital universal calipers that accept this dimension. Can this jaw be used for internal measurements as well? While optimised for external measurement, the design also allows internal checks in many setups when used with a suitably configured caliper and stable measuring technique. What care is recommended to preserve accuracy? Clean contact faces regularly and avoid impacts; the carbon-fibre construction is corrosion‑resistant but benefits from routine inspection to ensure alignment and damage‑free performance. What is the actual weight and size for handling considerations? The attachment weighs 0.2 kg and measures 150 mm in overall length with a 16 mm width, making it easy to handle for single‑operator tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Plastic Precision Caliper 0.05mm Vernier Reading, Depth Gauge - Metav IndustryLine
Take advantage of a lightweight, maintenance‑friendly measuring tool that delivers reliable workshop results: accurate 0.05 mm graduations, a practical 150 mm measuring range and an integrated depth gauge ensure routine tasks run smoothly. Order directly via Metav Werkzeuge or consult our specialists for bulk supply and stock details. Plastic Caliper 150 mm — analogue vernier, 0.05 mm reading (Metav IndustryLine) The Plastic Caliper 150 mm is an analogue measuring instrument designed for general workshop and maintenance use, providing basic outside, inside and depth measurements with a compact, easy‑to‑handle format Lightweight plastic construction Vernier reading 0.05 mm Integrated depth gauge 150 mm range for standard tasks Standard range accuracy for everyday workshop use The instrument is built around a classic analogue vernier design with a 0.05 mm graduation, making it suitable for routine checks and component matching in production environments. With a 150 mm measuring span the device sits in the Standard class of calipers, offering the best compromise between reach and stiffness for everyday tasks. The vernier scale permits readable, immediate results without batteries, and the specification aligns with common workshop tolerances, so the tool functions as a dependable rough‑to‑medium accuracy measuring solution. Practical handling and clear measuring functions A plastic body reduces weight and eliminates corrosion risks common to metal calipers, while the integrated depth gauge extends functionality beyond simple outside and inside measurements. The shorter jaw length of 40 mm keeps the instrument torsion‑resistant and easy to manoeuvre in confined spaces. The analogue layout keeps training time low and service needs minimal; basic maintenance is limited to keeping the sliding surfaces clean and lightly lubricated, which suits busy production benches and teaching environments where frequent, uncomplicated checks are required. A cost‑effective, low‑maintenance choice for standard tasks Constructed for routine operation rather than high‑precision metrology, this caliper offers a practical balance of economy and functionality. The light construction and simple mechanics mean fewer wear parts and lower replacement costs across a workshop fleet. Metav IndustryLine supplies this model with the usual European distribution assurance from Emmerich, backed by broad stock availability for straightforward reordering and reliable lead times for trade customers. Contact Metav Werkzeuge in Emmerich for procurement details or to discuss a volume requirement — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M201.114 GTIN: 4054469182469 Label: Messschieber aus Kunststoff 150 mm Ablesung 0,05 mm Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Reading / resolution: 0.05 mm Weight: 0.2 kg Jaw length: 40 mm Analogue vernier: yes Special features Material: plastic Depth measurement: integrated depth gauge Type: analogue caliper for workshop use Suitable application: standard workshop and maintenance tasks FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–150 mm and is classified in the Standard range for general workshop applications. What reading accuracy can be expected? The instrument provides a vernier reading of 0.05 mm; this makes it suitable for routine checks and component matching where medium‑level precision is sufficient. Is depth measurement available with this model? Yes, the caliper includes an integrated depth gauge for simple depth and step measurements in addition to outside and inside dimensions. Is the plastic construction suitable for metalworking tasks? The plastic construction offers corrosion resistance and low weight, making the caliper appropriate for general workshop, maintenance and training tasks; for high‑precision or heavy‑duty measurement in metalworking, higher‑specification metal calipers would be recommended. Which brand and SKU identify this product? This item is supplied under Metav IndustryLine with the article number M201.114 and GTIN 4054469182469. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pocket Precision Caliper 0.02mm Resolution, Monoblock Stainless Matt Chrome, Moment Lock, Depth Rod, DIN 862, Three-Point, Supplied In Case - Metav IndustryLine
Take advantage of reliable workshop measurement with a compact, hardened stainless‑steel design and a 0.02 mm vernier resolution for consistent results; the built‑in moment lock ensures repeatable settings and the instrument is supplied in a transport case for secure handling. Order the pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine TOP pocket caliper 150 x 0.02 mm — analogue pocket caliper with moment lock The Metav IndustryLine TOP pocket caliper is an analogue measuring instrument designed for universal workshop use, combining a 150 mm range with a fine 0.02 mm vernier for accurate everyday checks. 150 mm measuring range 0.02 mm vernier resolution Moment lock for repeatable setting Four measurement functions (4‑in‑1) Accurate control for process reliability The analogue construction conforms to DIN 862, providing a familiar, robust measuring principle for quality checks and machine setup. With a vernier resolution of 0.02 mm, the instrument supports precise comparative measurements and inspection tasks where small differences matter. The analogue scale and vernier offer immediate visual feedback without reliance on batteries or electronics, which simplifies traceability in routine controls and reduces downtime associated with power issues. Pocket‑sized durability for daily handling Designed as a pocket caliper with a 150 mm range, the instrument represents the Standard class for workshop metrology, balancing reach with stiffness and one‑hand operation. The body is made from stainless steel with a matt chrome finish and is fully hardened in a monoblock design, which increases resistance to wear and bending. These materials and the compact layout make it suitable for transport around the shop and for use in confined workstations, while the supplied transport case protects the device during storage and transfer. Four practical measuring functions in one tool The caliper supports four measurement functions — outside, inside, depth and step measurements — enabling multiple inspection tasks without changing instruments. A dedicated depth gauge and stepped jaw geometry are integrated to perform depth and shoulder checks efficiently. The analogue vernier layout is optimized for quick readings, making this tool a versatile choice for assembly, maintenance and general quality control where a single, lightweight instrument must cover diverse measuring needs. Repeatable setting and workshop ergonomics A mechanical moment lock allows the sliding jaw to be fixed with a reproducible clamping force, reducing variation from manual tightening and improving repeatability across repeated measurements. The monoblock hardened frame minimises flex, while practical details such as a thread table on the reverse side support day‑to‑day work. The overall configuration is focused on long‑term reliability and simplicity: serviceable, robust and suited to the pace of professional workshops. Choose the Metav IndustryLine TOP pocket caliper for dependable, repeatable measurement; contact Metav Werkzeuge in Emmerich for expert procurement and advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.074 GTIN: 4054469100463 Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.02 mm Vernier: 1/1000" (top) & 1/50–49 mm (bottom) Tariff code: 90173000 Jaw length: 40/17 mm Measurement functions: inside, outside, depth, step Special features Material: stainless steel, matt chrome, fully hardened, monoblock Moment lock for reproducible clamping Analogue (nonius) operation Four‑fold measurement capability Thread table on the reverse side Delivered in a transport case for secure handling Label: TOP FAQ What measurement functions does this caliper offer? The Metav IndustryLine TOP pocket caliper provides four measurement modes: outside, inside, depth and step measurement, enabling versatile workshop inspection. Is the instrument suitable for routine workshop checks? Yes, the analogue layout, 150 mm range and 0.02 mm resolution make the caliper well suited for everyday quality control and machine setup tasks in a workshop environment. What material and finish does the caliper have? The caliper is manufactured from stainless steel with a matt chrome finish and is fully hardened in a monoblock design for enhanced wear resistance. How is repeatability ensured during measurements? Repeatable settings are achieved via the mechanical moment lock, which fixes the sliding jaw with a consistent clamping force for repeat measurements. Does the caliper comply with recognised standards? The device is produced to meet DIN 862 requirements for vernier calipers, reflecting established workshop measurement standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com