HSS-G Body Drill Bits – Double-Ended, Bright, 135° Split Point

Karosseriebohrer (Body Drill) — Double-Sided HSS-G Twist Drill, 3.1 mm, 135° Tip, Bright Finished, Fully Ground Shank The Karosseriebohrer (Body Drill) is a double-sided Twist Drill designed for precision metalworking in portable drilling machines, combining HSS-G cutting performance with a 135° tip for demanding materials. Double-sided design for extended service life HSS-G grinding for fast, clean drilling 135° tip for hard and stainless steels Fully ground shank for high concentricity Bright finish reduces material adhesion Precision cutting performance for tough metals The MetavCUT Karosseriebohrer is manufactured from HSS-G, a ground high-speed steel that delivers high cutting speed and precise hole quality. The CNC grinding process produces sharp cutting edges and excellent roundness, which reduces vibration and produces clean bores in alloyed and unalloyed steels. This results in faster advance rates and lower operator effort compared with rolled designs, making the tool particularly effective where consistent hole quality is required. Optimised geometry for hard materials and tight holes With a 135° tip angle, this Twist Drill is configured to penetrate tougher materials—such as stainless steel—more reliably than steeper tips. The double-ended layout offers two working tips in one short, rigid body: when one end dulls, invert the drill and resume without interruption. This compact, stable geometry is ideal for sheet-metal work, rivet and thin‑plate holes and applications where runout control matters. Practical handling for workshop and on-site use Designed for use in a Drilling Machine or compatible hand drills, the Karosseriebohrer balances rigidity and accessibility: its short overall length lessens bending in portable setups while the fully ground shank ensures high concentricity in chucks. For best results in stationary work and when machining hard alloys, use appropriate cooling and moderate speeds to reduce thermal stress and the risk of breakage. Clean finishing and application-specific advantages The bright finished surface reduces chip adhesion and simplifies chip evacuation in many metalworking tasks, supporting cleaner holes and less post‑processing. The Standard Line model delivers a compact solution for metal drilling tasks with an overall length engineered for stability. Use this drill where precision, short overhang and reliable centring are priorities. Strongly recommend the MetavCUT Karosseriebohrer for precise metal drilling tasks — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58031-FDA Type: double-sided (Doppelseitig) Material: HSS-G Diameter: 3.1 mm Tip angle: 135° Spiral length: 10 mm Overall length: 46 mm Shaft execution: fully ground (geschliffen) Colour: bright finished (blank) Suitable for: Drilling Machine / Hand Drills; application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of a Twist Drill? The Twist Drill like the MetavCUT Karosseriebohrer (Body Drill) is primarily used for machining high‑strength materials and larger diameters; its design allows efficient material removal in metals and provides an easily regrindable edge that withstands substantial loads. Which three drill types exist? The main categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Karosseriebohrer belongs to the metal drill group and is optimised for steel and non‑ferrous metals. Why are Twist Drills pointed? The pointing reduces the cross‑cut at the tip of a Twist Drill, as with the MetavCUT Karosseriebohrer, lowering friction and required feed forces while improving centring accuracy in the workpiece. Can a metal Twist Drill be used for wood? A metal drill such as the MetavCUT Karosseriebohrer (Body Drill) can be used in wood, but it generally provides poorer guidance and a less clean finish than dedicated wood drills; however, metal drills are easier to resharpen and tend to have lower self‑feeding tendency. For which drilling depths is a Twist Drill most used? A solid through‑hole is commonly made with a Twist Drill; for diameters up to about 20 mm and drilling depths up to roughly 100 mm, the Twist Drill—such as the MetavCUT Karosseriebohrer—is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE is categorically superior to HSS is not always correct; assess working conditions carefully to decide whether the additional cost of HSSE over an HSS‑grade tool like the MetavCUT Karosseriebohrer is justified for your application.

Karosseriebohrer 3,25 mm | HSS-G geschliffen | doppelseitig | blank | Spitzenwinkel 135° Der Karosseriebohrer 3,25 mm von MetavCUT ist ein geschliffener HSS-G Doppelendbohrer für präzises Bohren in Metall und Blech, ideal für Handbohrmaschine und stationäre Werkstattanwendungen. HSS-G geschliffen für präzises Metallbohren Doppelendbohrer beidseitig verwendbar Spitzenwinkel 135° für harte Werkstoffe Schaft geschliffen für hohe Rundlaufgenauigkeit Kompakte Bauform mit 46 mm Gesamtlänge Höhere Effizienz durch geschliffene HSS-Geometrie Der geschliffene HSS-G Rohling sorgt für sehr scharfe Kanten und saubere Bohrbilder, wodurch sich die Arbeitsgeschwindigkeit im Vergleich zu herkömmlichen HSS-Bohrern deutlich erhöhen kann. Spitzenwinkel 135° reduziert das Auslaufen beim Anbohren harter Werkstoffe und ermöglicht ein kontrollierteres Eindringen in Edelstahl und tempergussartige Materialien. Der direkte Vorteil für die Praxis ist weniger Nacharbeit und gleichmäßigere Passungen. Vielseitige Einsatzbereiche für Werkstatt und Karosserie Mit einem Durchmesser 3,25 mm ordnet sich der Bohrer in den Standard-Bereich ein und eignet sich besonders für dünne bis mittlere Bleche sowie für allgemeine Metallarbeiten. Die kurze Spirallänge 10 mm und die kompakte Gesamtlänge 46 mm machen den Einsatz bei Karosseriereparaturen und Nietbohrungen komfortabel, speziell bei beengten Platzverhältnissen. Für besonders präzise Passungen empfiehlt sich vorheriges Anpunkten mit Zentrierbohrer. Praktischer Aufbau: doppelseitig und schlagfest konzipiert Die doppelseitige Ausführung erlaubt das Umdrehen des Werkzeugs, wenn eine Spitze stumpf wird, und wirkt dadurch wie zwei Bohrer in einem. Der schaft geschliffen erhöht die Rundlaufgenauigkeit und reduziert Vibrationen bei Hand- und Säulenbohrmaschinen, was zu saubereren Bohrlöchern führt. Beachten Sie, dass geschliffene HSS-Geometrien empfindlicher gegenüber Stoßbelastungen sind; eine moderate Kühlung verlängert die Standzeit. Zielgruppe, Pflegehinweise und Anwendungsempfehlung Der Bohrer richtet sich an Berufsschrauber, Karosserie-Profis und ambitionierte Heimwerker, die präzise Ergebnisse in Stahl, Guss und Nichteisenmetallen erwarten. Für langlebigen Einsatz empfiehlt sich die Nutzung mit angepasster Drehzahl, regelmäßiger Kühlung und das Vermeiden von Schlagbelastungen. MetavCUT liefert mit der Standard Line eine Lösung, die Präzision und Alltagstauglichkeit kombiniert. Empfehlung: Für präzise Blech- und Karosseriearbeiten ist der MetavCUT Karosseriebohrer die praktische Wahl — bei Fragen beraten die Experten von METAV Werkzeuge gern per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 580325-FDA Durchmesser: 3,25 mm Material: HSS-G Ausführung: doppelseitig Farbe: blank Gesamtlänge: 46 mm Spirallänge: 10 mm Spitzenwinkel: 135° Schaft Ausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was macht den MetavCUT Karosseriebohrer 3,25 mm besonders beim Bohren in Edelstahl? Der MetavCUT Karosseriebohrer 3,25 mm verfügt über einen Spitzenwinkel 135° und die geschliffene HSS-G Geometrie, die das Anbohren in härtere Werkstoffe wie Edelstahl erleichtert und für sauberere Bohrbilder sorgt. Kann der Karosseriebohrer 3,25 mm in einer normalen Handbohrmaschine verwendet werden? Ja, der Karosseriebohrer 3,25 mm ist für die Nutzung in der Handbohrmaschine ausgelegt; bei hoher Präzision empfiehlt sich jedoch vorheriges Anpunkten und eine angepasste Drehzahl. Wie verlängert man die Standzeit des MetavCUT Karosseriebohrers? Die Standzeit des MetavCUT Karosseriebohrers lässt sich durch moderate Drehzahlen, kontinuierliche Kühlung und das Vermeiden von Schlagbeanspruchung deutlich verbessern. Ist der doppelseitige Aufbau des Karosseriebohrers für den Werkstattalltag vorteilhaft? Der doppelseitige Aufbau des Karosseriebohrers bietet praktischen Nutzen, weil das Umkehren bei Stumpfheit sofortigen Weiterausbau erlaubt und so Ausfallzeiten reduziert. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#580325-FDA","sku":"580325-FDA","mpn":"580325-FDA","name":"Karosseriebohrer 580325-FDA","description":"Karosseriebohrer 3,25 mm, HSS-G geschliffen, doppelseitig, blank; kompakte Gesamtlänge 46 mm, Spirallänge 10 mm, Spitzenwinkel 135°; ideal für präzises Bohren in Stahl, Guss und Nichteisenmetallen bei Handbohrmaschine und stationären Anwendungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,25 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"46 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"10 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}],"brand":null},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Was macht den MetavCUT Karosseriebohrer 3,25 mm besonders beim Bohren in Edelstahl?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Karosseriebohrer 3,25 mm verfügt über einen Spitzenwinkel von 135° und eine geschliffene HSS-G-Geometrie, wodurch das Anbohren in härteren Werkstoffen wie Edelstahl erleichtert wird und saubere Bohrbilder entstehen."}},{"@type":"Question","name":"Kann der Karosseriebohrer 3,25 mm in einer normalen Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Karosseriebohrer 3,25 mm ist für die Nutzung in der Handbohrmaschine ausgelegt; bei hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer und angepasste Drehzahlen."}},{"@type":"Question","name":"Wie verlängert man die Standzeit des MetavCUT Karosseriebohrers?","acceptedAnswer":{"@type":"Answer","text":"Die Standzeit des MetavCUT Karosseriebohrers lässt sich durch moderate Drehzahlen, kontinuierliche Kühlung und das Vermeiden von Schlagbelastungen deutlich verbessern."}},{"@type":"Question","name":"Ist der doppelseitige Aufbau des Karosseriebohrers für den Werkstattalltag vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Ja, die doppelseitige Ausführung erlaubt das Umdrehen des Bohrers bei Stumpfheit und reduziert so Ausfallzeiten, da das Werkzeug wie zwei Bohrer in einem funktioniert."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-580325-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"Doppelendbohrer"}],"mentions":[{"@type":"Thing","name":"Anwendung: Bohrer für Metall"},{"@type":"Thing","name":"Empfehlung: moderate Drehzahlen und Kühlung"}]}]}

Body Drill (Twist Drill) — 3.2 mm, 135°, Double-sided, Bright Finished, HSS‑G The Body Drill Twist Drill is a precision metalworking tool designed for Drilling Machines and hand drills, delivering clean, repeatable holes in demanding sheet and plate applications. Double-sided design for extended usability HSS‑G ground geometry for faster, cleaner drilling 3.2 mm diameter for precise small-diameter bores 135° tip angle optimised for harder materials Fully ground shank for excellent concentricity Faster, cleaner holes with ground HSS geometry The Body Drill from MetavCUT uses HSS‑G material and a CNC-ground flute geometry to achieve sharp cutting edges and high running accuracy. This results in cleaner holes and reduced burr formation when drilling metals. The 3.2 mm diameter combined with a 135° tip angle shortens penetration time in harder steels and helps maintain hole geometry. For precision operations, the ground manufacturing method produces a consistently high surface finish, which is particularly beneficial when hole quality matters more than raw removal rate. Double-ended design for practical workshop efficiency A double-sided or double-ended Twist Drill offers practical advantages: when one tip becomes blunt, the drill can be reversed and the other cutting end used, effectively providing two cutting edges in one tool. The fully ground shaft and HSS‑G construction enable up to 40% faster drilling with approximately 50% less feed force compared with conventional HSS drills under the same conditions. These features make the tool well suited to repetitive tasks in sheet metal, where changing tools frequently interrupts workflow and increases downtime. Suited materials and recommended machining guidance The MetavCUT Body Drill is intended primarily for metalworking and performs well in legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and harder plastics. For best results in tougher alloys, use appropriate coolant and moderate cutting speeds; the 135° tip angle assists centring and reduces wandering on hard surfaces. Because the drill is ground rather than rolled, it offers superior concentricity and a precise hole finish, though care should be taken to avoid excessive shock loading to reduce the risk of breakage. Practical tips, target users and on-site advice Workshop professionals, sheet-metal fabricators and maintenance technicians benefit most from this compact Twist Drill design: its short overall length and robust double-ended layout make it ideal for tight or repeatable operations. When using handheld Drilling Machines, clamp workpieces securely and use cutting fluid for longer tool life. If uncertain whether the MetavCUT Body Drill meets specific production requirements or for guidance on speeds, feeds and coolant, METAV Werkzeuge offers comprehensive technical advice and application support to assist with selection and setup. MetavCUT's Body Drill with HSS‑G ground geometry is recommended for precision metal drilling—contact METAV Werkzeuge for expert guidance at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Body Drill (Twist Drill) Brand: MetavCUT SKU: 58032-FDA Diameter: 3.2 mm Tip angle: 135° Spiral length: 10 mm Total length: 46 mm Material: HSS‑G Execution: double sided Colour: bright finished Shank finish: fully ground For machine: Drilling Machine Model series: Standard Line Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Body Drill (Twist Drill) machine effectively cut? The MetavCUT Body Drill designed as a Twist Drill is primarily intended for metalworking and is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics; users should apply appropriate cutting fluid for best life and hole quality. Is the MetavCUT Body Drill suitable for handheld Drilling Machines? The MetavCUT Body Drill can be used in handheld Drilling Machines, provided the workpiece is securely clamped and feed pressure is controlled; the double-sided design and fully ground shank help maintain concentricity in portable setups. For what is a Twist Drill used? A Twist Drill, such as the MetavCUT Body Drill, is mainly used in the machining of high‑strength materials and for larger hole diameters; its form allows easy regrinding and it withstands higher loads, making it common in bodywork and sheet-metal drilling. Which three drill types are there? There are three principal drill types: metal drills, wood drills and stone/concrete drills; the MetavCUT Body Drill belongs to the metal drill category and is optimised for metalwork. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cutting edge at the tip of a Twist Drill. By sharpening, frictional forces are significantly lowered, requiring less feed force while improving the drill’s centring in the workpiece. Can a metal drill be used to drill wood? A metal drill like the MetavCUT Body Drill can be used in wood, but guidance and finish are inferior compared with purpose‑made wood drills; metal drills allow easier resharpening and show less self‑feeding tendency. At which drilling depths is the Twist Drill most used? A full‑bore hole is commonly executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Which is better, HSS or HSSE? The general belief that HSSE steels are intrinsically superior to HSS is not universally correct; the higher cost of HSSE must be justified by specific working conditions, so evaluate whether your application requires HSSE before choosing over HSS.

Karosseriebohrer — Body Drill (Diameter 3.3 mm · 135° Point Angle · Double-sided · Bright Finished · Fully Ground · HSS‑G) The Karosseriebohrer Body Drill is a compact Twist Drill designed for precision drilling in metal using a drilling machine, ideal for thin sheets, bodywork and industrial applications. Double-sided design for extended usability HSS‑G fully ground for precise, clean holes 135° point angle for harder materials Bright finished surface for smooth chip evacuation Faster, more controlled metal drilling for demanding tasks The fully ground HSS‑G geometry of this Body Drill delivers a noticeable increase in efficiency: compared with rolled HSS drills, the ground flute and cutting edges provide up to 40% faster drilling while requiring lower feed forces. This means less operator fatigue and more consistent results when working on alloyed and unalloyed steel, cast materials and hard plastics. The 135° point angle reduces walking on tough surfaces and improves centring, making it especially suitable for stainless steel and other harder workpieces. Reliable double-ended design for workshop flexibility Thanks to the double-sided (double‑ended) configuration, the Karosseriebohrer functions like two drills in one: if one tip becomes blunt, the drill can be reversed and used again, extending tool life and reducing downtime. The short, sturdy design commonly used in bodywork and sheet-metal work offers stable handling in hand drills and bench machines, while the bright finish aids chip flow and visual inspection of the cutting geometry. Application focus — engineered for metal and thin-sheet work This Body Drill is optimised for drilling in metal: legged and unlegged steels, cast steel, cast iron, sintered iron, malleable castings, non-ferrous metals and hard plastics. For best results in industrial or workshop use, pair the drill with appropriate coolant and secure clamping. When used in a hand drilling machine, the ground shank and precision flute geometry promote steadier running and cleaner hole quality even at higher spindle speeds. Practical advantages for professional users The fully ground shaft and precise CNC-style grind deliver high runout accuracy and sharply defined cutting edges, translating into clean, burr‑reduced holes and less rework. Shorter penetration time and reduced thrust mean more efficient production cycles. Users who value repeatable hole quality in bodywork, repair or manufacturing environments will benefit from the drill’s combination of durability and cutting performance. For precision metalworking choose the MetavCUT Karosseriebohrer Body Drill with HSS‑G grind — METAV Werkzeuge offers expert consultation to ensure this Twist Drill matches your application needs; contact us by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Karosseriebohrer / Body Drill Brand: MetavCUT Type: Double-sided (double‑ended) Diameter: 3.3 mm Point Angle: 135° Colour: Bright finished Execution: Double-sided Shaft Execution: Fully ground Material: HSS‑G Spiral Length: 10 mm Total Length: 46 mm For Drilling Machine: Drilling Machine (Hand drill) Application: Drills for metal Model Series: Standard Line Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the Karosseriebohrer Body Drill suitable for handheld drilling machines? The MetavCUT Karosseriebohrer Body Drill is designed to be used with drilling machines including hand drills; its short, stable double‑ended form and fully ground shank support accurate running in portable equipment, though for maximum tool life and safety a secure clamp and appropriate speed/coolant are recommended. What are Twist Drills used for? Twist Drills, like the Karosseriebohrer Body Drill, are mainly used for machining high‑strength materials and larger diameters; they are easy to regrind and withstand significant stresses. The ground HSS geometry typically enables faster cutting and lower feed forces compared with rolled drills. Which 3 drill types exist? The three primary drill types are: metal drills, wood drills and stone/concrete drills. MetavCUT produces drills optimised for metalworking, such as this Body Drill tailored to sheet and body applications.

Body Drill (Karosseriebohrer) — 3.4 mm, 135° Tip, HSS-G, Double‑Sided, Bright Finished The Body Drill is a double‑sided Twist Drill by MetavCUT for metalworking in Drilling Machines, designed for precise holes in sheet and solid materials. Body Drill 3.4 mm Diameter for metal applications Double‑Sided design for continued use when one tip dulls HSS‑G Material for sharp cutting and high roundness Fully ground shank for accurate runout and precise holes 135° Tip Angle optimized for harder materials like stainless steel High performance through advanced HSS‑G geometry This Twist Drill uses HSS‑G Material and a 135° Tip Angle, delivering a clear benefit: reduced bit walking and improved centring on hard surfaces. The Ground flute geometry produces very sharp cutting edges and excellent Roundness, which supports faster, cleaner holes in Steel and Cast Iron. For users who demand repeatable precision, this configuration minimises rework and improves hole quality with less manual alignment. Durable, practical design for workshop use A Double‑Sided execution means the tool functions like two bits in one: if one tip becomes blunt, the bit can be reversed and the second tip used immediately. The Fully Ground Shank ensures low runout in Chucks and improved concentricity, which is particularly useful for bodywork and sheet‑metal tasks. This short, stable design is well suited to operations where compactness and rigidity reduce vibration and improve finish. Targeted applications and material suitability Engineered for metalworking, the drill is recommended for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics. Its geometry makes it a reliable choice for technicians working on automotive body panels, fabrication shops and maintenance tasks. When the task demands clean holes in tougher substrates, this Twist Drill offers the necessary cutting geometry and rigidity to meet professional expectations. Handling advice to maximise tool life and hole quality To achieve optimal results with this Body Drill, apply appropriate cutting fluid and moderate feed to avoid excessive heat; the Ground construction yields sharp edges but can be more brittle than rolled tools. Using a Drill Press or stable Drilling Machine is advisable for deeper or critical holes. The 135° Tip reduces initial penetration forces and improves centring on hard materials, so adjusting feed and speed to the workpiece increases lifetime and hole quality. We recommend MetavCUT’s Body Drill for demanding metalwork — for personalised technical advice or to check suitability for specific applications please contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Body Drill Marke: MetavCUT SKU: 58034-FDA Label: Karosseriebohrer Ausführung: double sided Farbe: bright finished Für Bohrmaschine: Drilling Machine Spiral Length: 10 Spitzenwinkel: 135° Durchmesser: 3,4 Gesamtlänge: 46 Material: HSS-G Schaft Ausführung: fully ground Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Body Drill from MetavCUT and which machines suit it? The MetavCUT Body Drill (Twist Drill) is designed primarily for metalworking and is best used in a stable Drilling Machine or Drill Press; it performs well on sheet and solid metal components and offers improved centring due to its geometry. Can the MetavCUT Body Drill (Twist Drill) be used for different metals and plastics? Yes, the MetavCUT Body Drill is suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G construction and 135° Tip Angle are chosen to handle a variety of tougher materials effectively. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. The design is relatively easy to grind and withstands higher loads, making it suitable for bodywork and thin‑sheet holes. Which three drill types exist? There are Metal Drills, Wood Drills and Stone/Concrete Drills, each optimised in geometry and cutting edge for their respective material groups. Why are Twist Drills sharpened at the tip? Sharpening the tip reduces the cross‑cut at the point of the Twist Drill, significantly lowering friction and the required feed force while improving the bit’s ability to centre in the workpiece. Can you drill wood with a Twist Drill? A Metal Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills. Metal Drill bits are easier to resharpen and have lower self‑feed tendencies. For which drilling depths is the Twist Drill the most used tool? A solid bore is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS is incorrect; the decision should be based on actual working conditions and whether they justify the higher price of HSSE for the intended application.

Karosseriebohrer (Body Drill) — 3.5 mm, 135° Tip, Double‑Sided, Bright Finished, Fully Ground, HSS‑G The Karosseriebohrer is a precision Body Drill designed for metalworking applications, offering a 3.5 mm Diameter, 135° Point Angle and a double‑sided execution with a bright finished surface and fully ground shaft for reliable performance. Double‑ended design for extended tool life Fully ground HSS‑G for precise, clean holes 135° Point Angle optimised for harder metals Suitable for Drilling Machine and Hand Drill use Compact overall length of 55 mm for confined spaces Maximum cutting performance with fully ground HSS‑G The fully ground HSS‑G construction delivers a clear benefit: faster penetration and improved hole quality in metal. CNC grinding creates sharp cutting edges and high concentricity, which reduces wobble and produces clean, round holes. For users requiring precise results in alloyed or unalloyed Steel, Cast Steel, Cast Iron or non‑ferrous Metals, this basis of construction reduces the needed feed force and raises productivity without sacrificing accuracy. Double‑ended design for practical durability in bodywork A double‑sided, short Twist Drill is particularly practical in sheet‑metal and body applications: when one tip becomes blunt, the tool can simply be reversed, offering effectively two operational ends. This space‑saving and cost‑efficient solution is well suited for work on thin sheets, rivet holes and repair operations where quick tool change and robustness matter. 135° point for harder materials and stable centring The 135° Point Angle reduces walking and offers better centring on harder materials like stainless Steel; a larger tip angle shortens the time to engage the workpiece. When paired with the ground flute geometry, this Karosseriebohrer achieves lower friction at the tip and more consistent chip evacuation. For demanding drilling tasks, combine coolant and moderate speeds to balance performance and tool life. Designed for professionals in confined and metalworking environments With an overall length of 55 mm and a 3.5 mm Diameter, this tool from the Standard Line by MetavCUT is aimed at metalworkers, bodyshop technicians and maintenance professionals who require compact, reliable Twist Drills for production and repair. The bright finished surface supports smooth insert and removal, while the robust geometry keeps cycle times short and hole quality high. Choose the MetavCUT Karosseriebohrer with 135° Point Angle for dependable metal drilling — for tailored advice or specification support METAV Werkzeuge provides expert consultation by eMail at info@metav-werkzeuge.com, by Phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Karosseriebohrer Marke: MetavCUT SKU: 58035-FDA Diameter: 3.5 mm Overall Length: 55 mm Spiral Length: 13 mm Point Angle: 135° Execution: Double‑sided Shaft Finish: Fully ground Material: HSS‑G For Machine: Drilling Machine / Hand Drill Colour: Bright finished Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Karosseriebohrer Twist Drill used for? The Karosseriebohrer from MetavCUT is a Twist Drill primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its double‑ended design and ground HSS‑G geometry make it suitable for bodywork, thin‑sheet holes and tasks that demand quick reversal of a blunt tip while maintaining precision. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Karosseriebohrer is classified as a Metal drill (Twist Drill) tailored to metal applications rather than wood or masonry.

Karosseriebohrer – Doppelendbohrer 3,6 mm | HSS-G | 135° | blank | geschliffen | Gesamtlänge 55 mm | Spirallänge 13 mm | MetavCUT Der Karosseriebohrer von MetavCUT ist ein doppelseitiger HSS‑G Doppelendbohrer für präzise Metallbohrungen mit 3,6 mm Durchmesser und 135° Spitzenwinkel, ideal für Handbohrmaschine und Blecharbeiten. MetavCUT Karosseriebohrer 3,6 mm, geschliffen 135° Spitzenwinkel für härtere Werkstoffe Doppelseitig einsetzbar wie zwei Bohrer in einem HSS-G Material für saubere, präzise Bohrlöcher Effiziente Metallbearbeitung mit reduziertem Kraftaufwand Der geschliffene HSS‑G Doppelendbohrer liefert spürbar schnellere Ergebnisse beim Bohren in legiertem und unlegiertem Stahl sowie in Nichteisenmetallen. Durch den CNC‑Schliff entstehen sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was die Anbohrzeit verkürzt und saubere Bohrlöcher erzeugt. Anwender profitieren von bis zu 40 % schnellerem Bohren und einer deutlich geringeren Anpresskraft, wodurch Arbeitsabläufe in Werkstatt und Montage effizienter werden. Präzision und Standzeit dank spezieller Geometrie Die 135° Spitzengeometrie reduziert das Wandern beim Anbohren in härteren Werkstoffen und sorgt für kontrollierten Spanabtrag. Die geschliffene Spirale mit 13 mm Spiral­länge fördert saubere Spanabfuhr bei flachen Bohrtiefen, während die geschliffene Schaftausführung die Spannungsübertragung in der Bohrfutteraufnahme verbessert. Für Anwender bedeutet das weniger Nacharbeit, präzisere Passungen und längere Standzeiten bei stationärer Nutzung oder stabil geführten Handmaschinen. Vielseitiger Einsatzbereich und passende Maschinenempfehlung Als Doppelendbohrer ist dieses Werkzeug besonders geeignet für Karosserie‑ und Blecharbeiten, Niet‑ und Dünnblechbohrungen sowie allgemeine Metallbearbeitung. Die Ausführung empfiehlt sich für Handbohrmaschine und stationäre Bohrmaschinen mit stabilem Rundlauf; bei empfindlichen Materialien oder sehr tiefen Bohrungen ist eine stationäre Maschine mit Kühlung vorzuziehen. Ein Vorstechen mit einem Zentrierbohrer erhöht bei kritischen Anwendungen die Genauigkeit. Pflege, Sicherheit und Beratung für den richtigen Einsatz Um die Lebensdauer des Bohrers zu maximieren, sollten Kühlung und angepasste Schnittparameter bei wärmeempfindlichen Werkstoffen eingesetzt werden. Der doppelseitige Aufbau erlaubt schnelles Wenden bei Verschleiß und bietet damit wirtschaftlichen Nutzen in Werkstatt und Produktion. Bei Unsicherheit zu Einsatzparametern oder Materialkompatibilität steht METAV mit kompetenter Beratung bereit, damit das Werkzeug optimal eingesetzt werden kann. Setzen Sie auf den MetavCUT Karosseriebohrer für präzise Metallarbeiten und lassen Sie sich persönlich von METAV Werkzeuge beraten: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58036-FDA Durchmesser: 3,6 mm Spitzenwinkel: 135° Ausführung: doppelseitig (Doppelendbohrer) Farbe: blank Material: HSS-G Schaft Ausführung: geschliffen Gesamtlänge: 55 mm Spirallänge: 13 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet? Der Karosseriebohrer von MetavCUT mit 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl geeignet, wobei angepasste Schnittgeschwindigkeit und Kühlung empfohlen werden, um Überhitzung und vorzeitigen Verschleiß zu vermeiden. Kann der doppelseitige Aufbau den Arbeitsfluss in der Werkstatt verbessern? Ja, der Doppelendbohrer von MetavCUT kann die Verfügbarkeit erhöhen, da bei Verschleiß einfach umgedreht werden kann; das reduziert Werkzeugwechsel und standzeitbedingte Ausfallzeiten. Welche Maschine ist für diesen Bohrer am besten geeignet? Der MetavCUT Karosseriebohrer ist für Handbohrmaschine sowie stationäre Bohrmaschinen mit gutem Rundlauf geeignet; bei sehr tiefen oder hochfesten Materialien wird eine stationäre Lösung mit Kühlung empfohlen. Wie unterscheidet sich ein geschliffener HSS‑G Bohrer von einem gewalzten Bohrer? Ein geschliffener HSS‑G Bohrer besitzt schärfere Kanten und höhere Rundlaufgenauigkeit, was präzisere Bohrlöcher in Metall ermöglicht; dafür ist er empfindlicher gegen seitliche Belastung und sollte bevorzugt mit stabiler Maschinenaufspannung verwendet werden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58036-FDA","sku":"58036-FDA","mpn":"58036-FDA","name":"Karosseriebohrer 58036-FDA","description":"Doppelseitiger HSS-G Doppelendbohrer 3,6 mm, 135° Spitzenwinkel, blank, geschliffen, Gesamtlänge 55 mm, Spirallänge 13 mm; geeignet für Karosserie‑ und Blecharbeiten, Handbohrmaschine und stationäre Bohrmaschinen mit stabilem Rundlauf.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"58036-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,6 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig (Doppelendbohrer)"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"55 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"13 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller Details","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT ist ein geschliffener HSS‑G Doppelendbohrer mit 135° Spitzenwinkel und eignet sich für härtere Werkstoffe wie Edelstahl, wobei angepasste Schnittgeschwindigkeit und Kühlung empfohlen werden, um Überhitzung und vorzeitigen Verschleiß zu vermeiden."}},{"@type":"Question","name":"Verbessert der doppelseitige Aufbau den Arbeitsfluss in der Werkstatt?","acceptedAnswer":{"@type":"Answer","text":"Der doppelseitige Aufbau des Karosseriebohrers von MetavCUT erlaubt schnelles Wenden bei Verschleiß, erhöht die Verfügbarkeit und reduziert Werkzeugwechsel sowie standzeitbedingte Ausfallzeiten."}},{"@type":"Question","name":"Welche Maschine ist für den MetavCUT Karosseriebohrer am besten geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Karosseriebohrer ist für Handbohrmaschine sowie stationäre Bohrmaschinen mit gutem Rundlauf geeignet; bei sehr tiefen oder hochfesten Materialien empfiehlt sich eine stationäre Lösung mit Kühlung."}},{"@type":"Question","name":"Wodurch unterscheidet sich ein geschliffener HSS‑G Bohrer von einem gewalzten Bohrer?","acceptedAnswer":{"@type":"Answer","text":"Ein geschliffener HSS‑G Bohrer wie der Karosseriebohrer von MetavCUT besitzt schärfere Kanten und höhere Rundlaufgenauigkeit, was präzisere Bohrlöcher in Metall ermöglicht; dafür ist er empfindlicher gegen seitliche Belastung und sollte bevorzugt mit stabiler Maschinenaufspannung verwendet werden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-58036-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Doppelendbohrer für Karosseriearbeiten"},{"@type":"Thing","name":"HSS-G geschliffen für Metall"},{"@type":"Thing","name":"Standard Line Modellserie"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Stationäre Maschine mit Kühlung für tiefe/harte Anwendungen"},{"@type":"Thing","name":"Vorteil: Wenden bei Verschleiß ermöglicht doppelte Nutzungsdauer"}]}]}

Body Drill (Karosseriebohrer) — double-sided HSS-G, 3.7 mm, 135° The Body Drill (Karosseriebohrer) is a double-sided Twist Drill for hand Drilling Machines, designed for precise metalworking and sheet-metal applications with a 3.7 mm diameter and a 135° tip angle. Double-ended design for extended usability HSS-G ground geometry for clean metal holes Reduced feed force and faster drilling performance Bright finished surface for smooth chip evacuation High-efficiency cutting for hard materials The HSS-G ground construction of this Body Drill combines sharp cutting edges with high concentricity, enabling clean, precise holes in a variety of Metals. With a 135° tip angle the drill reduces walking and improves entry in harder materials such as stainless steel and alloyed steel. The fully ground flute geometry produces consistent chips and surface finish, which benefits users who require repeatable, high-quality results. Practical advantage of a double-sided design Thanks to the double-sided execution the tool works like two drills in one: when one tip becomes dull it can be reversed and the other end used, extending the service life in daily workshop use. This shorter, robust format is particularly suited for bodywork and thin-sheet drilling where stability and the option to flip the drill increase uptime. Operators will notice lower downtime and fewer tool changes during repetitive tasks. Optimised handling and recommended operating practice The fully ground shank and flute geometry deliver high roundness and dimensional accuracy, improving guidance in hand Drilling Machines. For best results when drilling tough or heat-sensitive materials, apply appropriate cooling and moderate cutting speeds to avoid embrittlement. Because ground HSS can be harder and more brittle than rolled versions, stationary use with coolant is recommended for sustained durability. Suited users and typical applications This Body Drill is targeted at Automotive Body Shops, Maintenance Technicians and metalworking professionals who need reliable, precise holes in thin to medium-thickness metals. Typical applications include sheet-metal assembly, rivet and fixture preparation and general metal fabrication. The tool is especially effective where clean hole quality and quick tool replacement by flipping the drill are priorities. For professional workshop results choose the MetavCUT Body Drill with HSS‑G ground geometry — and contact METAV Werkzeuge for expert advice and tailored technical support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Karosseriebohrer / Body Drill Brand: MetavCUT SKU: 58037-FDA Diameter: 3.7 mm Tip angle: 135° Execution: double-sided Colour: bright finished Material: HSS-G Shaft execution: fully ground Total length: 55 mm For drilling machine type: Drilling Machine (Handbohrmaschine) Model series: Standard Line Application: Drills for metal / Bohrer für Metall Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what are Twist Drills used? The Body Drill (Karosseriebohrer) from MetavCUT is a type of Twist Drill primarily applied to machining high-strength materials and larger drill diameters; its form allows for straightforward regrinding and it withstands higher loads, making it suitable for demanding metalworking tasks. Which 3 drill types exist? When choosing tools, consider the main categories: Metal drills (such as the MetavCUT Body Drill), Wood drills and Masonry/Concrete drills, each optimised for the specific material and drilling method.

Body Drill (Karosseriebohrer) — Double-Sided HSS‑G Twist Drill, 3.8 mm, 135° Tip, Bright Finished Body Drill (Karosseriebohrer) is a precision Twist Drill designed for demanding metalworking tasks with a double-sided configuration and a fully ground shank suitable for use in a Drilling Machine. MetavCUT Body Drill, 3.8 mm diameter Double-sided design for two usable tips HSS‑G fully ground for precise metal holes 135° tip angle for harder materials Bright finished shank, total length 55 mm Faster, cleaner holes in hard metals for reliable results The HSS‑G composition and fully ground geometry deliver sharp cutting edges and high runout accuracy, so each hole is consistently clean. The 135° tip angle reduces burr formation and improves entry on tougher alloys like stainless steel, while the bright finish supports smooth chip evacuation. Users benefit from reduced rework and more predictable hole tolerances when working with sheet metal, cast parts or non-ferrous components. Double-sided design reduces downtime and improves workshop efficiency Because the drill is double-sided, each end has a usable tip, effectively offering two cutting edges in one tool; when one tip dulls it can be reversed, extending tool life and minimizing tool changes. The short, stable geometry makes this drill particularly practical for bodywork and thin-plate drilling where precision and repeatability matter. For workshops aiming to keep cycle times low, the combination of Twist Drill design and robust HSS‑G material supports faster drilling with less feed force. Practical use cases and target users who profit most This Twist Drill is tailored for professionals and advanced hobbyists working on automotive body panels, sheet metal fabrication and machine maintenance. The product excels when creating clean holes for rivets or fasteners in thin to medium-thickness metal sheets. For technicians requiring a compact yet accurate drill for repetitive tasks, this tool balances durability and serviceability, while still being suitable for general metal drilling tasks on various alloys. Care, application tips and simple explanations for non-experts To achieve optimal results, use appropriate cutting speed, steady coolant flow and a stable drilling setup; the HSS‑G material can be more brittle than rolled alternatives and benefits from cooling. The term fully ground means the flutes and geometry are CNC-ground rather than rolled, producing a sharper cutting edge and better concentricity. For hand or machine use in a Drilling Machine, clamp the workpiece and ensure correct feed to avoid chipping. Re-sharpening is possible but should be done by experienced grinding to maintain the 135° geometry. Recommendation: Choose the MetavCUT Body Drill for precise, efficient metal drilling — for technical questions or personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271. Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58038-FDA Diameter: 3.8 mm Material: HSS‑G Execution: Double-sided Finish: Bright finished Shank: Fully ground Tip angle: 135° Spiral length: 13 mm Total length: 55 mm Suitable for: Drilling Machine / Hand Drills for metal Model series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Body Drill (Karosseriebohrer) best suited for? The MetavCUT Body Drill, a purpose-built Twist Drill, is particularly suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non-ferrous metals and hard plastics; its HSS‑G composition and 135° tip make it effective for harder workpieces and precise metal holes. For what is a Twist Drill used? A Twist Drill is mainly used for machining high-strength materials and larger drill diameters; its form permits easy regrinding and it withstands higher loads. It is widely applied where robust, clean holes are needed in metalworking and bodywork. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Body Drill belongs to the Metal Drill group and is optimised for that range of applications.

Karosseriebohrer 3,9 mm – HSS-G, 135°, doppelseitig, blank, geschliffen (MetavCUT Standard Line) Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer für Metall und bietet präzises Bohren in Dünnblech und Karosserieteilen bei Einsatz in Handbohrmaschine und stationären Vorrichtungen. Kompakte Bauform, Gesamtlänge 55 mm Doppelseitig einsetzbar für effizienten Wechsel CNC-geschliffene Geometrie für saubere Bohrlöcher Spitzenwinkel 135° für härtere Werkstoffe Geeignet für legierte und unlegierte Stähle Schnelleres Bohren und geringerer Kraftaufwand durch geschliffene HSS-G Geometrie Die HSS-G Ausführung des Bohrers sorgt für eine geschliffene Schneidengeometrie, die schärfere Kanten und eine hohe Rundlaufgenauigkeit gewährleistet. Das Resultat ist ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerem Anpressdruck gegenüber herkömmlich gewalzten HSS-Bohrern, was insbesondere bei Serienarbeiten in der Werkstatt Ermüdung reduziert und die Effizienz steigert. Bei härteren Materialien erzeugt der 135° Spitzenwinkel eine leichtere Anbohrung und kontrollierte Spanbildung. Doppelseitiges Konzept für Wirtschaftlichkeit und Flexibilität Der doppelseitige Aufbau macht den Bohrer zu einer praxisnahen Lösung für Karosserie- und Blecharbeiten: Ist eine Seite stumpf, kann die andere Seite sofort verwendet werden, was Ausfallzeiten reduziert und die Ersatzteilhaltung vereinfacht. Die kurze, stabile Bauform erhöht die Laufruhe und minimiert Vibrationen, wodurch saubere, präzise Bohrlöcher entstehen. Anwender profitieren von geringeren Gesamtbetriebskosten und höherer Verfügbarkeit im Arbeitsalltag. Passende Anwendungen und maschinelle Kompatibilität im Standard-Bereich Mit einem Durchmesser von 3,9 mm liegt der Bohrer im Standard-Bereich und ist somit ideal für Alltagseinsätze in Werkstatt, Montage und DIY-Projekten. Die Spirallänge 13 mm und die Gesamtlänge 55 mm bieten ausreichend Spanraum für typische Blech- und Karosseriearbeiten, während die Verwendung in Handbohrmaschine problemlos möglich ist. Für besonders präzise Ergebnisse wird das Anpunkten vor dem Bohren empfohlen; tiefe Sacklochbohrungen oder sehr harte Serienbearbeitung erfordern hingegen spezialisierte Verfahren. Hinweise zur Handhabung und Pflege für längere Standzeit Da geschliffene HSS-G Bohrer spröder sein können als gerollte Alternativen, lohnt sich der Einsatz von Kühlschmierstoffen bei größeren Serien oder harten Werkstoffen, um thermische Belastung zu reduzieren. Eine stationäre Aufnahme oder eine ruhige Handführung erhöht die Gebrauchsdauer und vermindert Bruchrisiken. Für feine Arbeiten in sehr dünnen Blechen empfiehlt sich eine stabile Fixierung des Werkstücks, um Ausweichen zu vermeiden und saubere Kanten zu erzielen. MetavCUT empfiehlt den Karosseriebohrer für präzise, wirtschaftliche Blechbearbeitung — bei Fragen zur Anwendung oder Auswahl steht METAV Werkzeuge mit persönlicher Beratung zur Verfügung: info@metav-werkzeuge.com, Tel. +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58039-FDA Durchmesser: 3,9 mm Material: HSS-G Ausführung: doppelseitig Farbe: blank Schaft-Ausführung: geschliffen Spitzenwinkel: 135° Gesamtlänge: 55 mm Spirallänge: 13 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Karosseriebohrer von MetavCUT für Edelstahl und gehärtete Werkstoffe? Der Karosseriebohrer von MetavCUT in HSS-G Ausführung ist dank des 135° Spitzenwinkels besser für härtere Werkstoffe geeignet als spitzere Geometrien; bei sehr hartem oder gehärtetem Stahl sollten jedoch spezielle Vollhartmetallwerkzeuge in Betracht gezogen werden, da HSS-G an seine thermischen Grenzen stoßen kann. Kann der Karosseriebohrer von MetavCUT in einer handelsüblichen Handbohrmaschine verwendet werden? Ja, der Karosseriebohrer von MetavCUT ist für den Einsatz in Handbohrmaschine konzipiert und bietet durch die kompakte Gesamtlänge und die geschliffene Schaftgeometrie stabile Laufwerte; trotzdem erhöht eine feste Werkstückspannung die Präzision. Welche Vorteile bietet die doppelseitige Ausführung des Karosseriebohrers von MetavCUT? Die doppelseitige Bauform beim Karosseriebohrer von MetavCUT erlaubt die Nutzung beider Schneidenden, was die Nutzungsdauer pro Werkzeug erhöht und Stillstandzeiten im Betrieb verringert, besonders praktisch bei häufigem Wechsel zwischen Bohrungen in Dünnblech. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58039-FDA","sku":"58039-FDA","mpn":"58039-FDA","name":"Karosseriebohrer 3,9 mm – HSS-G, doppelseitig, blank, geschliffen","description":"Doppelseitiger HSS-G Karosseriebohrer, Durchmesser 3,9 mm, Spitzenwinkel 135°, geschliffener Schaft, Gesamtlänge 55 mm, Spirallänge 13 mm; geeignet für Bohrer für Metall, ideal für dünne und mittlere Bleche sowie Karosserieteile; kompakte, stabile Bauform für Handbohrmaschine und stationäre Vorrichtungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"58039-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,9 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"55 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"13 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Werkstoffe eignet sich der Karosseriebohrer 3,9 mm von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer 3,9 mm von MetavCUT in HSS-G Ausführung eignet sich für legierte und unlegierte Stähle sowie Nichteisenmetalle und Hartkunststoffe; bei sehr hartem oder gehärtetem Stahl sind jedoch Vollhartmetallwerkzeuge zu prüfen."}},{"@type":"Question","name":"Kann der Karosseriebohrer 3,9 mm von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Karosseriebohrer 3,9 mm von MetavCUT ist für Handbohrmaschine konzipiert; die kompakte Gesamtlänge von 55 mm und die geschliffene Schaftgeometrie sorgen für stabile Laufwerte, eine feste Werkstückspannung verbessert die Präzision."}},{"@type":"Question","name":"Welche Vorteile bietet die doppelseitige Ausführung des Karosseriebohrers 3,9 mm von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die doppelseitige Ausführung des Karosseriebohrers 3,9 mm von MetavCUT ermöglicht die Nutzung beider Schneidenden, reduziert Stillstandzeiten und erhöht die Nutzungsdauer des Werkzeugs; die kurze, stabile Bauform minimiert Vibrationen und liefert saubere Bohrlöcher."}},{"@type":"Question","name":"Wie beeinflusst der 135° Spitzenwinkel die Leistung des Karosseriebohrers 3,9 mm von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel des Karosseriebohrers 3,9 mm von MetavCUT erleichtert das Anbohren härterer Werkstoffe und fördert eine kontrollierte Spanbildung, wodurch die Bohrleistung in anspruchsvolleren Metallen verbessert wird."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-58039-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer Standard Line"},{"@type":"Thing","name":"HSS-G geschliffene Geometrie"},{"@type":"Thing","name":"Doppelseitiger Doppelendbohrer"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine kompatibel"},{"@type":"Thing","name":"Spirallänge 13 mm"},{"@type":"Thing","name":"Geschliffener Schaft für hohe Rundlaufgenauigkeit"}]}]}

Body Drill (Karosseriebohrer) — Twist Drill for Drilling Machine, Diameter 3 mm, 135° Point, Double-sided, Bright Finished, HSS‑G, Fully Ground The Body Drill is a compact Twist Drill designed for Drilling Machine applications, featuring a 3 mm Diameter and a 135° Point Angle for reliable performance in harder metals. Robust HSS‑G material for hard metal drilling Double‑sided design allows quick flip‑over reuse 135° Point Angle for improved centring in stainless steel Fully ground shank for high runout accuracy Short 46 mm overall length suited to sheet metal work Precision for Hard Materials and Faster Cutting Because the twist drill is made from HSS‑G, the tool delivers high cutting performance on alloyed and unalloyed steel, cast steel, and non‑ferrous metals. The 135° Point Angle reduces the tendency to wander when starting a hole in harder materials and shortens the initial penetration time; this results in cleaner holes and improved process reliability. The fully ground geometry allows sharper cutting edges, which translates into up to faster drilling and lower required feed force compared with rolled drills. Practical Design for Automotive and Sheet‑Metal Tasks The double‑ended configuration means the drill functions like two tools in one: when one tip becomes blunt it can be reversed, reducing downtime and stock requirements. Its bright finished surface and relatively short overall length make this bit particularly suitable for bodywork, rivet holes and other thin‑sheet operations where stability and compact reach are required. This design supports efficient workflows in repair shops and manufacturing environments with frequent small holes. Runout Accuracy, Sharpness and Handling Recommendations A fully ground Shank and precision grinding produce improved runout accuracy, yielding rounder, more precise bores. However, ground HSS tools can be more brittle than rolled equivalents; therefore, cooling and moderate speeds are recommended for prolonged tool life. When used with appropriate cutting fluid and correct spindle alignment on a Drilling Machine, the tool provides consistent results and easier re‑grinding when necessary. Who Benefits and When to Choose This Drill Metalworkers, automotive technicians and maintenance teams will find this twist drill advantageous when working with harder steels or when hole quality and centring matter. The combination of HSS‑G metallurgy, the 135° tip geometry and double‑ended usability makes it a practical choice for repair shops and production settings where quick tip reversal and precise holes reduce cycle time. If uncertainty remains about suitability for a specific application, METAV Werkzeuge offers competent technical advice to help determine whether this tool matches the requested material and drilling parameters. We recommend the MetavCUT Body Drill as a reliable Twist Drill for demanding metalworking tasks — for personalised consultation and technical support, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message +49 170 2837271 on WhatsApp Technical Data Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58030-FDA Diameter: 3 mm Point Angle: 135° Type / For: Drilling Machine Execution: double sided Surface Colour: bright finished Spiral Length: 10 mm Overall Length: 46 mm Shank Execution: fully ground Material: HSS-G Model Series: Standard Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Body Drill (Twist Drill) mainly used for? The MetavCUT Body Drill is a Twist Drill primarily applied for metalworking tasks; it is especially suited to high‑strength materials and larger diameters where a robust geometry is required. This design remains easy to re‑grind and withstands higher loads typical of bodywork and thin‑sheet drilling. Which three drill types exist? The common classification distinguishes Metal Drills, Wood Drills and Stone/Concrete Drills. Can the MetavCUT Body Drill (Twist Drill) be used for stainless steel? The MetavCUT Body Drill with its 135° Point Angle and HSS‑G composition is appropriate for stainless steel when used with suitable cutting fluid and moderate cutting speeds; correct feed and cooling optimise hole quality and tool life.

MetavCUT Body Drill – Twist Drill, Ø 4.1 mm, 135°, Double-sided, Bright finished, HSS‑G, Fully ground The MetavCUT Body Drill is a double‑ended Twist Drill designed for precision metalworking in Drilling Machines, offering a 135° tip angle and a fully ground shank for high concentric accuracy. HSS‑G construction for hard metals Double‑ended design for extended usability 135° tip angle for stainless steel and hard alloys Fully ground shank for precise concentricity Bright finished surface for smooth chip flow Outstanding cutting performance for demanding metals Designed for work with legated and unlegated steels, this Twist Drill delivers high cutting performance thanks to its HSS‑G alloy and a 135° tip angle. The geometry reduces radial forces when entering hard materials, so drilling starts cleaner and with less wandering. Users benefit from faster penetration in tough substrates and a reduced risk of workpiece damage. Practical workshops find the shorter, double‑ended format especially suited to sheet and bodywork tasks where repeatable, centred holes are required. Long life through precise grinding and surface finish A CNC grind of the flutes creates very sharp cutting edges and excellent runout properties, while the bright finished surface supports consistent chip evacuation. This ground manufacturing approach yields cleaner holes and longer usable life under appropriate cooling. The fully ground shank improves centring in chucks and reduces vibration, which in turn enhances tool life and hole quality when used in a stable Drilling Machine setup. Applications, guidance and safe handling in the workshop Engineered for metalworking, the Twist Drill is particularly effective on cast materials, Tempered Steels, Non‑Ferrous Metals and Hard Plastics. For best results, select appropriate cutting speeds and use coolant for higher alloy steels. When turning a blunt side, the double‑ended design allows immediate reuse by flipping the tool, providing operational efficiency in production or maintenance environments. Always secure the workpiece and observe safety practices when working with high‑speed Metal Drilling. Who benefits most and why experts choose this design Maintenance technicians, panel beaters and precision shops benefit from the combination of double‑ended utility and HSS‑G sharpness. The reduced axial force and improved centring capability make the drill a practical choice for repeatable holemaking in bodywork and thin‑plate metal applications. MetavCUT’s Standard Line aims to balance robust performance with straightforward handling for both station‑based and mobile Drilling Machine work. Strong recommendation: Choose the MetavCUT Body Drill for precision metal drilling — contact METAV Werkzeuge for tailored advice and technical support via email, phone or WhatsApp Are you unsure whether this Twist Drill meets your requirements or need additional data? METAV Werkzeuge offers competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58041-FDA Diameter: 4.1 mm Tip Angle: 135° Spiral Length: 13 mm Overall Length: 55 mm Material: HSS‑G Execution: Double-sided Shaft Execution: Fully ground Colour: Bright finished Intended Use: Drills for metal / Drilling Machine Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Body Drill Twist Drill? The MetavCUT Body Drill Twist Drill is primarily used for machining high‑strength metals and larger drilling diameters; its double‑ended design and HSS‑G composition make it suitable for demanding bodywork and thin‑plate applications where robust, repeatable holes are required. Can the MetavCUT Body Drill be used in handheld drills? The MetavCUT Body Drill Twist Drill is intended for use with Drilling Machines but can be used in suitable Hand Drills when proper clamping and reduced cutting speeds are observed; for best performance and safety, a stable Drilling Machine with coolant is recommended. What are Twist Drills primarily used for? Twist Drills are mainly applied in the machining of high‑strength materials and larger drill diameters; their design enables straightforward resharpening and they withstand higher loads, making them ideal for metalworking and bodywork tasks. Which three drill types exist? There are three common families of drill: Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the secondary cutting edge at the tip of the Twist Drill, which lowers friction forces and therefore decreases required feed force while improving centre‑holding accuracy in the workpiece. Can a metal drill be used to drill wood? A Metal Drill can be used in wood, but guidance and hole finish are generally inferior compared to purpose‑made Wood Drills. Metal Drills are easier to resharpen and tend to have less aggressive self‑feed characteristics. For which drilling depths is the Twist Drill most commonly used? A through‑hole is typically made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.

Body Drill — Twist Drill, 4.2 mm, 135° tip, double sided, bright finished, HSS‑G The Body Drill is a double‑sided twist drill for metalworking, designed for use with drilling machines and optimised for sheet metal and rivet holes. Double‑ended design for reversible use Fully ground HSS‑G for high precision Optimised 135° tip for hard metals Bright finished surface for easy chip evacuation Short, stable geometry for sheet metal work High‑performance Material for Faster, Cleaner Drilling The HSS‑G construction combined with a fully ground shaft yields exceptionally sharp cutting edges and high concentricity. This manufacturing method—CNC grinding rather than rolling—produces a Twist Drill with very precise geometry, which leads to cleaner holes and reduced runout. In practice, the ground HSS geometry can deliver up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS variants, making it particularly effective when working with alloyed and unalloyed steels, cast materials and hard plastics. Precision Tip Geometry Minimises Entry Time and Workpiece Damage An optimised 135° tip shortens the initial contact time and improves centring on harder materials such as stainless steel and cast iron. The larger tip angle spreads cutting forces and reduces tendency to chip or pull, so the Twist Drill penetrates smoothly under proper coolant and clamping conditions. For users this means fewer re‑drills, better surface quality and lower risk of workpiece distortion when producing precise, repeatable holes. Double‑ended Design: Practical and Economical in Sheet Metal Work The double‑sided (double‑ended) configuration functions like two drills in one: when one cutting end becomes dull it can be reversed and the opposite end used immediately. This compact, short geometry is ideal for Body‑ and sheet‑metal applications, especially where rivet or thin‑plate holes are common. The bright finished surface aids chip flow and inspection, while the short length improves stability in handheld or bench drilling operations. For best results use with appropriate speeds and cooling to mitigate brittleness under heavy loads. Who Benefits and How to Use It for Long Service Life Metalworkers, body shop technicians and maintenance teams benefit from the stable cutting action and easy reversibility of this twist drill. For optimal life and hole quality, clamp the workpiece securely, use adequate cooling, and avoid excessive feed on thin sheets. The MetavCUT Body Drill performs well in drilling machines and stationary setups; due to its ground geometry it is also straightforward to re‑sharp in a controlled workshop environment if required. Choose the MetavCUT Body Drill for reliable, high‑precision sheet metal and general metal drilling — for technical advice or help selecting the right drill for your application contact METAV Werkzeuge; we provide expert consultation by e‑mail, phone and WhatsApp: info@metav-werkzeuge.com · +49 2822 7131930 · +49 170 2837271 Technical Specifications Designation: Body Drill Brand: MetavCUT SKU: 58042-FDA Diameter: 4.2 mm Overall length: 55 mm Spiral length: 13 mm Tip angle: 135° Material: HSS‑G Execution: double sided Shank execution: fully ground Colour / Finish: bright finished For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Body Drill (MetavCUT) cut reliably? The MetavCUT Body Drill, a robust twist drill, is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics; its HSS‑G geometry is optimised for those harder materials and provides clean holes when used with correct speeds and coolant. What is a Twist Drill used for? A Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; its form is easy to resharpen and it tolerates higher loads, which makes it suitable for demanding metalwork and large‑diameter holes. Which three drill types exist? The three common drill categories are metal drills, wood drills and stone/concrete drills.

Body Drill (Twist Drill) — Double‑Ended HSS‑G, Ø 4.3 mm, 135° The Body Drill is a double‑ended Twist Drill from MetavCUT designed for precise metalworking and drilling machines, ideal for short, stable holes in sheet metal and chassis applications. Double‑ended design for two usable tips HSS‑G material for sharp, precise holes 135° tip angle for harder materials Fully ground shank for high concentricity Bright finished surface for easy chip evacuation Faster, more accurate metal drilling with a ground HSS design The Body Drill delivers a measurable productivity advantage: its HSS‑G construction and fully ground Flute Geometry enable up to 40% faster drilling with significantly lower axial force compared to conventional HSS bits. This makes shorter cycle times and reduced operator fatigue achievable, particularly when processing Alloyed and Unalloyed Steel. The 135° Tip Angle reduces chatter when penetrating harder materials, improving Hole Quality and prolonging tool life. Stable double‑ended format for workshop efficiency A Double‑Ended or double‑sided configuration means the tool functions like two drills in one: when one tip is worn, simply reverse the bit to use the other end. This design is especially valuable in high‑throughput sheet‑metal and chassis work where quick tip changes reduce downtime. The bright finished surface aids Chip Evacuation while the short overall length contributes to rigidity and better axial control during drilling. Clear suitability and handling recommendations for users This Twist Drill is specified for metalworking tasks and suits both stationary Drilling Machines and robust hand drills when used with proper clamping and coolant. For best results in Stainless Steel and other hard alloys, maintain steady spindle speed, use cutting fluid, and avoid excessive pecking; these measures preserve the HSS‑G cutting edges and help achieve round, burr‑reduced holes. Operators seeking repeatable precision will appreciate the high Round‑Run Accuracy of the fully ground Shank. Sustainable use, lifecycle and support from METAV Werkzeuge Choosing a durable ground HSS tool reduces consumable turnover and scrap from poor holes, supporting more efficient manufacturing practices. For technical questions about feed rates, speeds or suitable coolant for specific alloys, METAV Werkzeuge offers comprehensive advice and support tailored to your application. Their guidance helps ensure safe, optimal use of the Body Drill and maximises service life. Strong recommendation: For precise chassis and sheet‑metal work, choose MetavCUT’s Body Drill and contact METAV Werkzeuge for expert application support at info@metav-werkzeuge.com or +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Body Drill / Karosseriebohrer Brand: MetavCUT SKU: 58043-FDA Material: HSS‑G (ground high‑speed steel) Diameter: 4.3 mm Spiral (Flute) Length: 13 mm Overall Length: 55 mm Tip Angle: 135° Execution: Double‑ended (double‑sided) Shank Finish: Fully ground Colour / Surface: Bright finished For Use With: Drilling Machine Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill by MetavCUT best used for? The Body Drill (Twist Drill) from MetavCUT is primarily used for cutting holes in metal, especially in chassis and sheet‑metal applications; its double‑ended design and HSS‑G material make it suitable for alloyed and unalloyed steels, cast irons and hard plastics where short, precise holes are required. Which three drill types exist? Commonly distinguished drill types are Metal Drills (often HSS or HSS‑G), Wood Drills, and Masonry/Concrete Drills; the Body Drill from MetavCUT belongs to the Metal Drill category and is optimised for metalworking tasks. What is a Twist Drill used for? A Twist Drill is mainly applied when machining high‑strength materials and larger hole diameters; its geometry allows straightforward re‑grinding and it withstands considerable loads, making the MetavCUT Body Drill suitable for demanding metal drilling operations. Why are Twist Drills pointed (sharpened)? The point sharpening reduces the cross‑edge at the tip of the Twist Drill, lowering friction and thus reducing required feed forces; this sharpening also improves centring in the workpiece and results in cleaner, more accurate holes when using tools such as the MetavCUT Body Drill.

Body Drill Twist Drill — 4.4 mm, 135°, Double-Sided, Bright Finished, HSS-G by MetavCUT A Body Drill twist drill designed for precision metalworking, ideal for drilling in automotive panels and thin sheet applications. Double-ended reversible design for extended use HSS-G material for precise, clean metal holes 135° tip optimized for harder materials Fully ground shank for excellent concentricity Short, robust profile for sheet-metal and bodywork Durable HSS-G construction for precise metalwork The Body Drill from MetavCUT is manufactured in HSS-G, a ground high-speed steel grade that delivers high precision and sharp cutting edges. Ground flute geometry provides superior hole quality and repeatable performance when machining alloys and steels. Because the flutes are ground rather than rolled, the result is a cleaner cutting geometry and improved concentricity, which reduces vibration and leads to consistently accurate holes. Double-sided design that extends tool life Engineered as a double-sided (double-ended) twist drill, this bit offers practical redundancy: when one tip becomes dull, the tool can be reversed and the second cutting end used, effectively doubling usable life for many workshop scenarios. The compact, short profile makes it particularly suited to tight spaces in automotive bodywork and thin-sheet operations, where a stable, robust tool is required for repeatable drilling. 135° tip and application guidance for harder materials The 135° tip angle reduces initial cutting forces and improves centring when working with harder materials such as stainless steel or tempered alloys. For users less familiar with drill geometry: a larger tip angle flattens the cutting edge, slowing initial penetration but improving stability and reducing burr formation. This makes the bit well suited for drilling in both alloyed and unalloyed steels, cast irons, and some hard plastics when used with appropriate cutting fluid and moderate speeds. Compatibility, handling and recommended use The bit features a fully ground shank designed for secure chucking in standard Drilling Machines and Hand Drills. Its short overall length and ground shank minimise runout, improving precision in repetitive tasks. For best results, use cooling lubricant when drilling tough steels and avoid excessive pecking on very hard materials to reduce the risk of breakage. This tool is aimed at bodywork professionals, metal fabricators, and maintenance technicians who require reliable performance in demanding conditions. MetavCUT’s HSS-G double-sided Body Drill is recommended for demanding metalworking tasks — for personalised technical advice or to confirm suitability for specific applications, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Designation: Body Drill Brand: MetavCUT SKU: 58044-FDA Diameter: 4.4 mm Point angle: 135° Version / Execution: Double-sided Colour / Finish: Bright finished Material: HSS-G Shank execution: Fully ground Spiral length (flute length): 13 mm Overall length: 55 mm For Drilling Machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Body Drill twist drill is primarily used for machining high-strength materials and larger hole diameters in metalworking. Twist drills of this type are often applied to alloyed and unalloyed steels, cast steel, cast iron, sintered iron, non-ferrous metals and hard plastics. Their geometry makes them relatively easy to grind and able to withstand significant loads. Which three drill types exist? Three common categories are metal drills, wood drills, and stone/concrete drills. The MetavCUT Body Drill belongs to the metal-drill category, designed specifically for metalworking tasks and differing in geometry and material from wood or masonry bits.

MetavCUT Body Drill (Karosseriebohrer) — Twist Drill for Drilling Machine, 4.5 mm Ø, 135° tip, HSS‑G, double‑sided, bright finished, fully ground shaft The MetavCUT Body Drill is a double‑sided Twist Drill engineered for precise metalworking on drilling machines, combining HSS‑G cutting performance with a 135° tip for hard materials. Double‑ended design for two usable tips High‑speed HSS‑G for precise metal drilling 135° tip for harder materials like stainless steel Fully ground shank for high roundness accuracy Bright finished surface for improved corrosion resistance Engineered for hard metals with lower feed force and fast cutting The MetavCUT Body Drill uses HSS‑G material to achieve high cutting performance in demanding conditions. The ground geometry results in very sharp cutting edges and improved roundness, which can lead to up to 40% faster drilling and approximately 50% less required feed force compared with conventional HSS drills. This makes the tool particularly efficient when working with alloyed and unalloyed steels, cast steels and other hard metals, delivering clean holes with minimal burr formation. Practical double‑ended design and robust shaft for workshop use A double‑sided or double‑ended Twist Drill offers clear workshop advantages: two usable tips in one short, stable body. If one tip becomes blunt, the drill can be reversed and the opposite tip used, effectively providing two tools in a single bit. The fully ground shaft and bright finished surface contribute to high concentricity and easier handling in chucks, while the compact overall length increases stability when drilling thin sheets or rivet holes. Best applications and dimensional clarity for correct tool selection Designed for metalworking, this Body Drill is suitable for Drilling Machines and hand drills where precision is required. Key dimensions are a diameter of 4.5 mm, a spiral/ flute length of 13 mm and an overall length of 58 mm. Typical materials include cast iron, sintered iron, tempered cast, non‑ferrous metals and hard plastics; the 135° tip reduces thrust and improves centring in tougher substrates. Choose appropriate speeds and coolant when machining harder alloys. Simple recommendations to prolong life and improve hole quality To avoid chipping or breakage, use moderate speeds and adequate cooling when working with hard materials, and secure the workpiece to eliminate runout. The ground flute geometry improves chip evacuation, but the short spiral length is optimised for through‑holes and thin‑section drilling rather than deep boring. For repeatable, high‑quality results, prefer stationary setups with coolant and verify feed rates to match the stated benefits of reduced feed force. Strong recommendation: the MetavCUT Body Drill is ideal for professionals seeking durable, precise metal drilling — for further technical advice or assistance contact METAV Werkzeuge for expert consultation via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58045‑FDA Diameter: 4.5 mm Tip angle: 135° Material: HSS‑G Execution: double‑sided Colour / Finish: bright finished Intended for: Drilling Machine / Hand Drill Spiral length: 13 mm Overall length: 58 mm Shaft execution: fully ground Model series: Standard Line Application: Drills for metal Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Body Drill be used in a handheld drill or is a drilling machine required? The MetavCUT Body Drill is suitable for use in both a drilling machine and a robust hand drill, but best results—especially in hard or alloyed metals—are achieved with a stable drilling machine and appropriate coolant to reduce heat and prevent breakage. Why choose a double‑sided Twist Drill like the MetavCUT Body Drill? A double‑sided Twist Drill provides two usable tips in one tool; when one end becomes blunt it can simply be reversed, offering greater cost efficiency and reduced downtime in workshops handling thin sheets or riveted assemblies. For what is a Twist Drill used? A Twist Drill is mainly applied to machining high‑strength materials and larger drill diameters; its design allows relatively easy re‑grinding and it withstands higher loads, making it especially common for metalworking tasks and holes in sheet or structural components. Which three drill types exist? There are three common drill families: metal drills, wood drills and masonry/concrete drills. Each type is optimised for material‑specific geometry and cutting behaviour.

Body Drill (Karosseriebohrer) — Double-sided Twist Drill, 4.6 mm, 135° Point, HSS-G, Bright Finished, Fully Ground Shank, Standard Line by MetavCUT The Body Drill is a double-sided Twist Drill designed for precise metalworking with Drilling Machines, offering fast penetration and reliable hole quality for sheet metal, castings and alloyed steels. Double-sided design for reversible use HSS-G material for precise metal drilling 135° point angle for harder materials Fully ground shank for high concentricity Bright finished surface for improved corrosion resistance Faster, cleaner holes thanks to precision engineering Manufactured for demanding metal applications, this Twist Drill combines a HSS-G cutting geometry with a 135° point angle to reduce chatter and improve centring in hard materials. The ground flute geometry provides sharp cutting edges and consistent chip evacuation, which means fewer restarts and a more predictable drilling process. For workshops that rely on repeatable results, this configuration lowers scrap rates and shortens cycle times. Practical benefits of the double-sided, fully ground design A double-ended layout lets the operator use both ends, effectively doubling tool life per piece and reducing tool changes. The fully ground shank ensures excellent concentricity in chucks and collets, minimising runout and vibration during high-speed operation. This results in cleaner Bohrlöcher and less secondary finishing, especially when working with thin sheet metal and structural parts. Where this drill excels and who benefits most The tool is optimised for metalworking: suitable for legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle and hard plastics. Professionals in Bodywork, Maintenance and Production will value the combination of robustness and precision. Workshops using portable Drilling Machines or small stationary units benefit from the reversible tip and the reliable performance of a ground HSS geometry. Handling recommendations and machining tips To preserve tool life, use appropriate cutting speeds for the material and apply coolant where possible, particularly for stainless steels. The Bright Finished surface eases chip release and reduces corrosion risk during storage. Because the drill is ground rather than rolled, it delivers superior hole quality but can be more brittle; avoid excessive side loads and use steady axial feed to prevent breakage. Strong recommendation: choose MetavCUT quality for demanding metal drilling — for further technical advice or selection help contact METAV Werkzeuge for expert support eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Information Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58046-FDA Diameter: 4.6 mm Point angle: 135° Overall length: 58 mm Spiral length: 13 mm Execution: double sided Shank finish: fully ground Colour: bright finished Material: HSS-G Application: Drills for metal Model series: Standard Line For use with: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill from MetavCUT used for and which machine fits best? The MetavCUT Body Drill is a double-sided Twist Drill intended for metalworking and is primarily used with handheld Drilling Machines or small bench drills where precise, repeatable holes in sheet and cast materials are required. Can the MetavCUT Body Drill be used for different metal types? The MetavCUT Body Drill with HSS-G construction is suitable for alloyed and unalloyed steels, cast steel, cast iron, non-ferrous metals and hard plastics, offering clean holes and reliable tool life under proper cutting conditions. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and large drill diameters. Its geometry is easy to grind and withstands higher loads, making it suitable for holes in demanding metals. Which three drill types exist? The three main drill types are metal drills, wood drills, and stone/concrete drills. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of a Twist Drill. This lowers frictional forces so less feed force is required and improves the drill's centring in the workpiece. Can a metal drill be used for wood drilling? Metal drills can be used in wood, but they offer poorer guidance and less clean results compared with dedicated wood drills. Their advantage is easier resharpening and a reduced tendency to self-feed.

Body Drill (Karosseriebohrer) — Twist Drill | Diameter 4.7 mm · 135° Point Angle · Double-sided · Bright Finished · Fully Ground Shank · Material HSS‑G The Body Drill is a double‑ended Twist Drill designed for precision metalworking and drilling machines, ideal for clean, repeatable holes in sheet metal and alloyed steels. Double‑ended design for two usable tips Fully ground HSS‑G for precise, fast cutting 135° point angle for harder materials Bright finished surface for smooth chip evacuation Short, robust geometry for sheet metal and rivet holes Faster, cleaner holes thanks to fully ground HSS‑G Fully ground HSS‑G construction gives this Twist Drill a finely sharpened cutting geometry produced by CNC grinding rather than rolling. This results in high roundness accuracy and consistently clean hole walls, which reduces rework and improves fit tolerances. For workshop and production use, the improved cutting action can deliver up to 40% faster penetration and requires noticeably less feed force, making drilling more efficient on alloyed and unalloyed steels. Robust double‑ended design that extends tool life A double‑ended, or double‑sided, configuration effectively provides two cutting tips in one tool, so when one end dulls it can be reversed for immediate reuse. This compact format is particularly advantageous for operations on thin sheets and bodywork where short, rigid drills perform best. The short overall length and bright finished surface promote predictable chip flow and reduce the risk of chatter in handheld or bench drilling applications. Optimised geometry for demanding materials With a 135° point angle, the drill tip is tuned for harder materials such as stainless steel and cast components, offering reduced skidding at the entry and improved centring. The geometry lowers the initial bite and spreads cutting forces, which is beneficial when working with tough substrates and when precise hole positioning is required. Use appropriate cooling for high‑load tasks to maintain edge life and avoid premature breakage. Practical handling and machine compatibility Equipped with a fully ground shank, this Twist Drill ensures good concentricity and secure clamping in standard drilling chucks and machines. The 58 mm overall length and 13 mm flute length are suited to typical sheet and plate tasks, while the robust HSS‑G material copes well with a range of ferrous and non‑ferrous metals, as well as hard plastics. The tool is intended for use with a drilling machine and benefits from steady feed and coolant for best results. Who benefits from this tool Workshops, bodyshops and maintenance technicians will value the combination of precision, durability and the convenience of a reversible tip. The drill is especially appropriate for tasks requiring clean, repeatable holes in thin metal assemblies, rivet preparation and repair work where changeover speed and hole quality matter. For bespoke technical advice or complex requirements, Metav Werkzeuge provides expert consultation to ensure the correct tool choice. If the reliability and cutting performance of MetavCUT tools are required for metalworking tasks, consider the Body Drill by MetavCUT and contact METAV Werkzeuge for tailored support — they offer detailed advice and technical assistance via email, phone and WhatsApp at info@metav-werkzeuge.com · +49 2822 7131930 · +49 170 2837271 Technical data Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58047-FDA Type / Execution: Double-sided / doppelseitig Material: HSS‑G Finish / Colour: Bright finished / blank Shank Finish: Fully ground / geschliffen For Drilling Machine: Drilling Machine / Handbohrmaschine Diameter: 4.7 mm Point Angle: 135° Spiral (Flute) Length: 13 mm Overall Length: 58 mm Model Series: Standard Line Application: Drills for metal / Bohrer für Metall Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the Body Drill by MetavCUT excel? The Twist Drill, such as the Body Drill from MetavCUT, is primarily used for drilling high‑strength materials and larger diameters; its geometry makes it suitable for alloyed and unalloyed steel, cast materials and hard plastics. The double‑ended form offers practical redundancy—if one tip wears, the tool can be reversed to use the other tip, which is especially useful in bodywork and thin‑sheet applications. Which three drill types exist and how does the Body Drill compare? The three common drill types are Metal drills, Wood drills and Masonry/Concrete drills. The Body Drill by MetavCUT belongs to the metal drill category and is optimised for metalworking with a fully ground HSS‑G design that delivers precise holes and superior cutting action compared to generic multipurpose bits. Why are Twist Drills pointed and what benefit does the 135° point angle provide? Pointing reduces the cross‑edge at the tip and lowers friction; by sharpening the centre, the drill requires less feed force and centres more reliably. A 135° point angle, like on this MetavCUT Body Drill, is better suited to harder materials because it reduces initial cutting resistance and improves tip stability during entry. Can a metal Twist Drill be used for wood drilling? A metal drill such as the MetavCUT Body Drill can be used in wood, but it will generally provide less guidance and a rougher finish than a dedicated wood bit. Metal drills can be reground more easily and have less self‑feeding action, which may be advantageous in controlled drilling tasks but less so for fast timber work. For which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard for through‑hole drilling in solid materials. They are most commonly used up to diameters of around 20 mm and depths up to approximately 100 mm; the MetavCUT Body Drill’s compact geometry is tailored to short, accurate holes in sheet and plate work. Is HSS or HSSE better for my application? The simple notion that HSSE is always superior to HSS is not universally accurate. Selection should be based on working conditions: HSS‑G, as used in the MetavCUT Body Drill, offers excellent edge sharpness and hole quality for many metalworking tasks, while HSSE may be justified where specific performance under extreme conditions warrants the additional cost. Are you unsure whether this tool meets your requirements or need further technical data? METAV Werkzeuge provides comprehensive, expert advice and support — contact them at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271.

Karosseriebohrer – HSS‑G, 4,8 mm, 135°, doppelseitig, blank, geschliffen, Standard Line, MetavCUT Der Karosseriebohrer ist ein doppelseitiger HSS‑G-Bohrer für Metallbohrungen, konzipiert für Handbohrmaschine und stationäre Anwendungen bei Karosserie‑ und Blecharbeiten. CNC-geschliffen: schnelle, präzise Bohrungen Beidseitig einsetzbar als Doppelendbohrer Bis zu 40 % schnelleres Bohren, geringere Anpresskraft Geeignet für legierten und unlegierten Stahl Stabiler, kurzer Aufbau für Karosserie- und Blecharbeiten Überlegene Materialqualität für langlebige Schneidleistung Die Fertigung aus HSS‑G mit CNC‑geschliffener Geometrie sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit. Durch den CNC‑Schliff reduziert sich die Anbohrzeit, das Material wird sauberer abgetragen und die Standzeit steigt im Vergleich zu gewalzten Ausführungen. Anwender profitieren von einer effizienteren Bearbeitung und gleichmäßigeren Bohrbildern, insbesondere bei mittelharten bis harten Werkstoffen. Präzision und Einsatz: geeignet für anspruchsvolle Metallarbeiten Mit einem Durchmesser von 4,8 mm und einem Spitzenwinkel von 135° wurde der Bohrer für härtere Werkstoffe optimiert; der größere Winkel erleichtert das Anbohren und reduziert Aufbauschneiden. Die Geometrie macht den Bohrer ideal für legierten Stahl, Gusseisen, Temperguss sowie Hartkunststoffe. Beim Einsatz mit Kühlung und stationärer Aufnahme liefert die Schneide saubere Bohrungen ohne Ausrisse. Konstruktion reduziert Stillstand und erhöht Praxisnutzen Die Doppelendbohrer-Auslegung erlaubt das einfache Wenden bei Verschleiß: Ist eine Seite stumpf, kann die andere genutzt werden, was Ausfallzeiten und Werkzeugkosten verringert. Der kurz gehaltene, geschliffen ausgeführte Schaft sorgt für hohe Stabilität beim Anbohren in Blech und Karosserieblech. Zur Vermeidung von Bruch ist auf gleichmäßige Vorschubkräfte und gegebenenfalls Kühlschmierstoff zu achten. Für wen dieser Bohrer eine sinnvolle Wahl ist Im Standard‑Bereich ist dieses Werkzeug besonders für Werkstätten, Karosseriebetriebe und anspruchsvolle Heimwerker geeignet, die regelmäßig Metall bohren. Der Bohrer passt zu Handbohrmaschine und stationären Säulenbohrern und bietet eine praktische Kombination aus Zuverlässigkeit und Wirtschaftlichkeit bei mittleren Bohrdurchmessern. Für sehr tiefe Bohrungen oder Serienharteinsätze sind spezialisierte Vollhartmetalllösungen zu prüfen. Greifen Sie zum geschliffenen HSS‑G‑Doppelendbohrer von MetavCUT für präzise, effiziente Metallbohrungen – bei Fragen oder zur Auswahl passender Werkzeuge berät Sie METAV Werkzeuge gern persönlich per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten für präzise Auswahl Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58048-FDA Typ / Ausführung: doppelseitig Material: HSS-G Durchmesser: 4,8 mm Spitzenwinkel: 135° Gesamtlänge: 58 mm Spiralänge: 13 mm Schaft-Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie unterscheidet sich der Karosseriebohrer von MetavCUT zu einem konventionellen HSS-Bohrer? Der Karosseriebohrer von MetavCUT ist ein geschliffener HSS‑G‑Doppelendbohrer, dessen CNC‑Schliff für schärfere Kanten und höhere Präzision sorgt; dadurch werden Bohrzeit und Anpresskraft gegenüber gewalzten HSS‑Ausführungen deutlich reduziert. Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet? Der Karosseriebohrer von MetavCUT ist primär für legierten und unlegierten Stahl, Guss und Hartkunststoffe ausgelegt; bei stark austenitischem Edelstahl empfiehlt sich eine Anwendung mit geeigneter Kühlung und angepasstem Schnittparameter, da der 135° Spitzenwinkel die Anbohrung erleichtern kann. Kann der Karosseriebohrer von MetavCUT in einer Handbohrmaschine eingesetzt werden? Ja, der Karosseriebohrer von MetavCUT wurde für die Nutzung in Handbohrmaschine und stationären Maschinen konzipiert; bei handgeführten Anwendungen sind niedrige Vorschubkräfte und saubere Spannmittel empfehlenswert, um Bruch zu vermeiden. Was ist der praktische Vorteil der doppelseitigen Ausführung beim Karosseriebohrer von MetavCUT? Die doppelseitige Bauweise beim Karosseriebohrer von MetavCUT ermöglicht das Umdrehen bei Verschleiß, was die Verfügbarkeit erhöht und die Werkzeugkosten senkt, da jede Seite als eigenständige Schneide nutzbar ist. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58048-FDA","sku":"58048-FDA","mpn":"58048-FDA","name":"Karosseriebohrer 58048-FDA","description":"Doppelseitiger HSS‑G Doppelendbohrer, Durchmesser 4,8 mm, Spitzenwinkel 135°, geschliffen, blank; Kurzbauweise für Karosserie- und Blecharbeiten; geeignet für Handbohrmaschine und stationäre Anwendungen; Standard Line von MetavCUT.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Typ / Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Durchmesser","value":"4,8 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"58 mm"},{"@type":"PropertyValue","name":"Spiralänge","value":"13 mm"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Preis Netto","value":"1.36 EUR"},{"@type":"PropertyValue","name":"UID","value":"58048-FDA"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie unterscheidet sich der Karosseriebohrer von MetavCUT von einem konventionellen HSS-Bohrer?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT ist ein geschliffener HSS‑G Doppelendbohrer; der CNC‑Schliff sorgt für sehr scharfe Kanten, höhere Rundlaufgenauigkeit, bis zu 40 % schnelleres Bohren und geringere Anpresskraft gegenüber gewalzten HSS‑Ausführungen."}},{"@type":"Question","name":"Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT ist primär für legierten und unlegierten Stahl, Guss und Hartkunststoffe ausgelegt; bei stark austenitischem Edelstahl empfiehlt sich Kühlung und angepasste Schnittparameter wegen des 135° Spitzenwinkels."}},{"@type":"Question","name":"Kann der Karosseriebohrer von MetavCUT in einer Handbohrmaschine eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Karosseriebohrer von MetavCUT wurde für Handbohrmaschine und stationäre Maschinen konzipiert; bei handgeführten Anwendungen sind niedrige Vorschubkräfte und saubere Spannmittel empfehlenswert, um Bruch zu vermeiden."}},{"@type":"Question","name":"Was ist der praktische Vorteil der doppelseitigen Ausführung beim Karosseriebohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die doppelseitige Bauweise des Karosseriebohrers von MetavCUT erlaubt das Umdrehen bei Verschleiß, erhöht die Verfügbarkeit und senkt Werkzeugkosten, da jede Seite als eigenständige Schneide nutzbar ist."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/58048-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"HSS-G geschliffener Doppelendbohrer"},{"@type":"Thing","name":"Karosserie- und Blechbearbeitung"},{"@type":"Thing","name":"Standard Line: Kurzbauweise, hohe Stabilität"}],"mentions":[{"@type":"Thing","name":"Einsatz in Handbohrmaschine und stationären Maschinen"},{"@type":"Thing","name":"Geeignet für legierten und unlegierten Stahl"},{"@type":"Thing","name":"Empfehlung: Nutzung mit Kühlung bei Edelstahl"}]}]}

MetavCUT Body Drill (Karosseriebohrer) — 4.9 mm, 135° Tip, Double‑Sided, Bright Finished, HSS‑G The MetavCUT Body Drill (Karosseriebohrer) is a purpose‑built Twist Drill for metalworking, designed for use in drilling machines and suitable for precision holes in sheet and structural steels. Double‑Sided design for two usable tips HSS‑G fully ground for precise holes 135° tip angle for harder materials Bright finished surface for smooth chip evacuation Short, stable geometry ideal for body and sheet metal work High performance for demanding metal drilling The MetavCUT Body Drill is engineered for efficient metal removal: the HSS‑G material and CNC grinding process produce very sharp cutting edges and high concentricity, which enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills. The 135° tip angle reduces the tendency to grab and is optimised for harder materials such as alloyed and unalloyed steels, cast steels and non‑ferrous metals, delivering reliable entry and consistent hole quality. Precision by design — why the fully ground geometry matters A fully ground flute and shank mean the chip geometry and cutting edges are created by grinding rather than rolling. This yields excellent run‑out accuracy and clean, burr‑reduced holes in metal. Because ground HSS can be more brittle than rolled variants, best results are achieved with steady drilling speeds and appropriate cooling. The bright finished surface supports smoother chip flow and reduces heat build‑up at the cutting zone. Optimised for metal‑working applications and workshop use Designed primarily as a Twist Drill for metal, this tool is well suited to bodywork, thin plate and structural drilling tasks. The double‑ended execution provides two cutting tips in one: when one end dulls it can be reversed for immediate reuse, a practical advantage in production and maintenance environments. The geometry and material make the tool a good match for both stationary drilling machines and robust workshop setups where repeatability and hole quality are critical. Practical advantages for professionals The short, stable form factor commonly used in body and sheet metal operations improves guidance and reduces vibration during drilling, resulting in more accurate hole placement. The fully ground shank enhances clamping accuracy in chucks and collets. For users seeking durability and re‑sharpenability, the drill’s HSS‑G construction allows straightforward resharpening while maintaining a reliable cutting performance under appropriate cutting conditions. For dependable, workshop‑grade metal drilling choose the MetavCUT Body Drill — contact METAV Werkzeuge for personalised technical advice and ordering support: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Body Drill / Karosseriebohrer Marke: MetavCUT SKU: 58049-FDA Diameter: 4.9 mm Total Length: 58 mm Spiral Length: 13 mm Tip Angle: 135° Material: HSS‑G Execution: Double‑Sided (Doppelendbohrer) Shaft Finish: Fully Ground (geschliffen) Surface Finish: Bright Finished For Use In: Drilling Machine / Hand drills suitable depending on machine setup Model Series: Standard Line Application: Drills for metal, including alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the MetavCUT Body Drill suitable for? The MetavCUT Body Drill is intended as a Twist Drill for metalworking; it performs well in body and sheet metal tasks as well as when drilling alloyed and unalloyed steels, cast materials and non‑ferrous metals, offering clean holes and good run‑out accuracy. How should the MetavCUT Body Drill be used to achieve the best results? Use the MetavCUT Body Drill at appropriate speeds for the material, apply steady feed, and employ cooling/lubrication for tougher alloys; the fully ground geometry benefits from proper clamping and steady drilling to exploit its precision advantages. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and larger drill diameters. Their shape allows easy regrinding, and they withstand substantial loads; they are particularly common for drilling holes in metal and thick sections. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Masonry/Concrete Drills.

Karosseriebohrer (Body Drill) — Twist Drill, 4 mm, 135°, Double-sided, Bright Finished, Fully Ground, HSS-G A Karosseriebohrer (Body Drill) designed as a double-sided Twist Drill for precise metalworking with a 4 mm diameter and a 135° point angle, suitable for hand Drilling Machines and industrial use MetavCUT Body Drill for metal applications 4 mm Diameter for accurate pilot holes 135° Point Angle for harder materials Double-sided design offers two usable tips Fully ground HSS-G for clean, precise holes Durable HSS-G construction for demanding metalwork The fully ground HSS-G material ensures a sharp cutting geometry and high roundness accuracy, which produces clean holes in a wide range of metals. Because the flutes are produced by CNC grinding rather than by rolling, the bit achieves very precise cutting edges that reduce burr formation and improve hole quality. This design is particularly advantageous when working with legierte and unlegierte Stahl, Gussstahl and other hardened materials where a stable, sharp tip matters for consistent results. Faster drilling with lower force and reliable centring Thanks to the double-sided design and the ground geometry, this Twist Drill requires noticeably less feed force and delivers accelerated penetration compared with conventional bits. The reduced thrust demand and the optimized point geometry mean that drilling can be performed up to 40 % faster while needing less operator pressure, making repetitive tasks easier and reducing operator fatigue. The 135° point angle improves centring and performance in harder materials while lowering the risk of walking on the workpiece. Practical design for metalworking workshops and on-site jobs The short, robust shape of this double-ended twist drill makes it ideal for bodywork, sheet-metal and rivet-hole preparation where stability and repeatable hole quality are essential. The bright finished surface improves visibility of the cutting edges, and the fully ground shaft provides excellent runout and seating in chucks. Compatibility with standard hand Drilling Machines means this bit is versatile for both stationary and portable setups, offering dependable results across workshop and field applications. Who benefits from this Body Drill and how to use it effectively Craftspeople, maintenance technicians and metal fabricators will appreciate the combination of precision and practical durability. When machining cast parts, tempered steels or high-strength alloys, using coolant and a steady drill speed suited to the material will extend tool life. The double-ended Twist Drill can be reversed once one tip is dulled, effectively giving two usable cutting tips per tool and improving cost efficiency for repetitive drilling tasks. If you need personalised guidance whether this MetavCUT Karosseriebohrer meets your exact requirements or require additional technical data, METAV Werkzeuge offers expert advice — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical specifications Designation: Body Drill / Karosseriebohrer Brand (Marke): MetavCUT SKU: 58040-FDA Diameter: 4 mm Point Angle: 135° Overall Length: 55 mm Spiral Length: 13 mm Execution / Type: Double-sided (doppelseitig) Shaft Finish: Fully ground (geschliffen) Material: HSS-G Colour: Bright finished (blank) Suitable for: Drilling Machine / Hand Drilling Machine Model Series: Standard Line Application: Drills for metal / Twist Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Karosseriebohrer (Body Drill) are primarily used for machining high-strength materials and larger drill diameters; their shape allows straightforward sharpening and they withstand greater loads, making them suitable for tasks such as creating holes in sheet metal and structural components. Which three drill types exist? Commonly distinguished drill types are metal drill, wood drill and stone/concrete drill; the MetavCUT Karosseriebohrer is designed as a metal drill (Twist Drill) optimised for steel and non-ferrous metals. Why are Twist Drills re-sharpened at the tip? Re-sharpening reduces the cross cutting edge at the tip, which lowers friction and the feed forces required; this results in better centring of the MetavCUT Karosseriebohrer and improved drilling performance in demanding materials. Can a metal Twist Drill be used in wood? A metal drill such as the MetavCUT Karosseriebohrer can be used in wood, but guidance is reduced and finish quality may be lower; however, these bits are easier to re-sharpen and exhibit less self-feeding compared with specialised wood bits.

Karosseriebohrer — Bohrer für Metall, Ø 5,1 mm, Spitzenwinkel 135°, doppelseitig, blank, HSS-G Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer für präzises Bohren in Metall, ideal für Blecharbeiten und Reparaturen mit Handbohrmaschine. HSS-G geschliffen für präzise Schnittkanten Doppelseitige Ausführung: 2-in-1 Nutzbarkeit Spitzenwinkel 135° für harte Werkstoffe Optimiert für Handbohrmaschinen und Blech Spirallänge 16 mm für kontrollierte Bohrtiefen Schnelles, sauberes Bohren dank geschliffener HSS-G-Geometrie Der geschliffene HSS-G Werkstoff sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere und präzise Bohrlöcher zur Folge hat. Durch den CNC-Schliff ist die Geometrie optimiert, was ein bis zu 40 % schnelleres Bohren und rund 50 % geringere Anpresskraft gegenüber herkömmlichen HSS-Bohrern ermöglicht. Das Ergebnis ist weniger Gratbildung und eine ruhigere Bohrung, besonders bei legierten und unlegierten Stählen. Doppelseitiges Design für effiziente Werkstattabläufe Die doppelseitige Bauform macht den Bohrer praktisch wie zwei Werkzeuge in einem: Ist eine Spitze stumpf, wird der Bohrer umgedreht und die zweite Spitze genutzt. Das kurze, stabile Design reduziert Vibrationen und ist speziell für Karosserie- und Blecharbeiten ausgelegt. Die geschliffene Schaftausführung verbessert die Spannungsübertragung in der Spannzange und minimiert das Wackeln bei Handbohrmaschinen. Passgenau für Alltagsanwendungen im Metallbereich Mit einem Durchmesser von 5,1 mm gehört der Bohrer in den Standard-Bereich und ist ideal für Werkstatt, Montage und DIY-Projekte. Er eignet sich zum Bohren in Dünn- bis Mittelblechen sowie in Werkstoffen wie legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoffen. Die Kombination aus Spitzenwinkel 135° und HSS-G macht ihn besonders tauglich für härtere Werkstoffe. Praxisgerechte Hinweise zur Anwendung und Lebensdauer Die Spirallänge 16 mm begrenzt die effektive Bohrtiefe und sorgt für sichere Spanabfuhr bei typischen Blechdicken; die Gesamtlänge beträgt 62 mm. Für höchste Präzision empfiehlt sich bei kritischen Passungen ein Anpunkten vor dem Bohren. Beachten Sie, dass geschliffene HSS-G Bohrer empfindlicher gegenüber Bruch sind; im Dauereinsatz und bei hohen Temperaturen empfiehlt sich Kühlung und eine stationäre Aufnahme. Für tiefe Löcher oder Serienbearbeitung sind mehrstufige Verfahren empfehlenswert. Empfehlung: MetavCUT Standard Line Karosseriebohrer mit HSS-G wählen für saubere, effiziente Metallbohrungen — bei Fragen steht METAV Werkzeuge gern mit technischer Beratung zur Verfügung, kontakt: info@metav-werkzeuge.com oder tel. +49 2822 7131930 Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58051-FDA Durchmesser: 5,1 mm Material: HSS-G Ausführung: doppelseitig (Doppelendbohrer) Spitzenwinkel: 135° Schaft Ausführung: geschliffen Farbe: blank Gesamtlänge: 62 mm Spirallänge: 16 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Karosseriebohrer von MetavCUT (Bohrer für Metall) für Edelstahl geeignet? Der Karosseriebohrer von MetavCUT ist durch den Spitzenwinkel 135° und das HSS-G Material für härtere Werkstoffe geeignet, kann Edelstahl bearbeiten, wobei angemessene Kühlung und korrekter Vorschub empfohlen werden. Kann ich den Karosseriebohrer von MetavCUT mit einer Handbohrmaschine verwenden? Ja, der Karosseriebohrer von MetavCUT ist für den Einsatz mit Handbohrmaschinen konzipiert; durch die geschliffene Schaftausführung wird die Spannungsübertragung optimiert und Vibrationen reduziert. Wie tief kann ich mit dem Karosseriebohrer von MetavCUT sicher bohren? Die effektive Bohrtiefe wird durch die Spirallänge 16 mm bestimmt; für tiefere Löcher sollten mehrstufige Aufbohrungen oder längere Spezialbohrer verwendet werden. Was ist der Vorteil der doppelseitigen Ausführung beim Karosseriebohrer von MetavCUT? Die doppelseitige Ausführung beim Karosseriebohrer von MetavCUT ermöglicht eine sofortige Wendbarkeit bei stumpfer Spitze, was Ausfallzeiten reduziert und die Wirtschaftlichkeit in der Werkstatt erhöht. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58051-FDA","sku":"58051-FDA","mpn":"58051-FDA","name":"Karosseriebohrer 58051-FDA","description":"Karosseriebohrer Ø 5,1 mm, doppelseitig, HSS-G geschliffen, Spitzenwinkel 135°, blank; kurz, stabil und optimiert für Handbohrmaschinen und Blecharbeiten; Spirallänge 16 mm, Gesamtlänge 62 mm.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,1 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Spirallänge","value":"16 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"62 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT mit Spitzenwinkel 135° und HSS-G eignet sich zum Bohren in härteren Werkstoffen wie Edelstahl; angemessene Kühlung und korrekter Vorschub werden empfohlen."}},{"@type":"Question","name":"Kann ich den Karosseriebohrer von MetavCUT mit einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Karosseriebohrer von MetavCUT ist für den Einsatz mit Handbohrmaschinen konzipiert; die geschliffene Schaftausführung verbessert die Spannungsübertragung und reduziert Vibrationen."}},{"@type":"Question","name":"Wie tief kann ich mit dem Karosseriebohrer von MetavCUT sicher bohren?","acceptedAnswer":{"@type":"Answer","text":"Die effektive Bohrtiefe mit dem Karosseriebohrer von MetavCUT wird durch die Spirallänge von 16 mm bestimmt; für tiefere Löcher sollten längere Spezialbohrer oder mehrstufige Aufbohrungen genutzt werden."}},{"@type":"Question","name":"Welcher Vorteil ergibt sich aus der doppelseitigen Ausführung des Karosseriebohrers von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die doppelseitige Ausführung des Karosseriebohrers von MetavCUT erlaubt das Umdrehen bei stumpfer Spitze, reduziert Ausfallzeiten und erhöht die Wirtschaftlichkeit in der Werkstatt."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-58051-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"Doppelseitiger Doppelendbohrer"}],"mentions":[{"@type":"Thing","name":"Spirallänge 16 mm"},{"@type":"Thing","name":"Spitzenwinkel 135°"},{"@type":"Thing","name":"Geschliffener Schaft"}]}]}

Karosseriebohrer HSS‑G (Durchmesser 5,2 mm, Spitzenwinkel 135°, doppelseitig, blank, geschliffen) Der Karosseriebohrer ist ein kurzbauender, doppelseitiger HSS‑G Bohrer für präzise Bohrungen in Stahl, Gusseisen und Nichteisenmetallen mit Handbohrmaschine. HSS-G geschliffen für hohe Schnittkraft Doppelendbohrer: beidseitig einsetzbar 135° Spitzenwinkel für harte Werkstoffe Geschliffener Schaft für präzisen Rundlauf Kompaktbauform ideal für Karosserie und Blech Schnellere Arbeitszyklen durch geschliffene HSS‑Geometrie und geringere Anpresskraft Der Karosseriebohrer der MetavCUT Standard Line kombiniert HSS‑G-Material mit CNC‑geschliffener Geometrie, was eine sehr scharfe Schneide und hohe Rundlaufgenauigkeit ermöglicht. Das Ergebnis ist ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern. Diese Eigenschaft reduziert Ermüdung bei längerem Einsatz und erhöht die Effizienz bei Serien‑ und Reparaturarbeiten in der Karosserie‑Werkstatt. Präzision in dünnen Blechen und hartem Material dank 135° Spitzenwinkel Der 135° Spitzenwinkel wurde gewählt, um das Eintauchen in harte Werkstoffe wie legierten Stahl oder Temperguss zu erleichtern und das Anbohren zu verkürzen. Die kurzbauende Form und die doppelseitige Ausführung erlauben schnelles Weiterarbeiten: Bei stumpfer Spitze einfach umdrehen und weiterbohren. Für Anwender bedeutet das weniger Rüstzeit und konstante Bohrbildqualität bei Niet‑ und Blechverbindungen. Anwendungsempfehlungen für Handbohrmaschinen und Materialwahl Mit einem Durchmesser von 5,2 mm liegt der Bohrer im Standard‑Bereich für Handwerk und Montage, geeignet für dünne bis mittlere Bleche, Profile und Flachstahl. Für beste Ergebnisse empfiehlt sich ein leichtes Kühlmittel bei Stahl und eine kontrollierte Drehzahl mit stabiler Auflage. Bei stärkeren oder sehr zähen Materialien sollte vorgebohrt oder eine stationäre Maschine mit Kühlung genutzt werden, um Bruch durch Biegebeanspruchung zu vermeiden. Robuste Verarbeitung, sichere Handhabung und Hinweise zur Pflege Der komplett geschliffene Schaft sorgt für sicheren Rundlauf in Spannzangen und reduziert Vibrationen, was die Standzeit erhöht. Reinigung der Spannuten und regelmäßige Kontrolle auf Gratbildung verlängern die Lebensdauer. Wegen der spröderen Natur geschliffener HSS‑G Werkzeuge empfiehlt sich schonende Handhabung und, bei längeren Einsätzen, der Gebrauch einer stationären Maschine oder externer Kühlung. MetavCUT empfiehlt den Einsatz dieses Karosseriebohrers für präzise Blech‑ und Karosseriearbeiten; bei Fragen zur Anwendung oder für technische Beratung erreichen Sie unseren Kundenservice per eMail unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 — unsere Beratung hilft bei der Auswahl des richtigen Werkzeugs. Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58052-FDA Durchmesser: 5,2 mm Gesamtlänge: 62 mm Spirallänge: 16 mm Spitzenwinkel: 135° Ausführung: doppelseitig (Doppelendbohrer) Material: HSS-G Schaft Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Kann der Karosseriebohrer von MetavCUT in Edelstahl eingesetzt werden? Der Karosseriebohrer von MetavCUT (HSS‑G) ist für legierte und unlegierte Stähle sowie für Gusseisen und Nichteisenmetalle optimiert; bei rostfreien Edelstählen ist erhöhte Kühlung und reduzierte Drehzahl empfehlenswert, um Überhitzung und Verschleiß zu verringern. Wie nutze ich die doppelseitige Ausführung optimal bei der MetavCUT Karosseriebohrer‑Ausführung? Die doppelseitige Ausführung des MetavCUT Karosseriebohrers erlaubt das sofortige Umdrehen bei stumpfer Spitze; so steht praktisch eine zweite Schneide zur Verfügung, was Rüstzeiten reduziert und die Wirtschaftlichkeit im Werkstattalltag erhöht. Ist der geschliffene Schaft des MetavCUT Karosseriebohrers für Spannzangen geeignet? Ja, der geschliffene Schaft des MetavCUT Karosseriebohrers sorgt für besseren Rundlauf in Spannzangen und erhöht die Standzeit, weshalb diese Ausführung für stationäre und handgeführte Anwendungen mit stabiler Auflage empfohlen wird. Welche Drehzahl und Kühllösung empfiehlt MetavCUT für den Karosseriebohrer bei Stahl? MetavCUT empfiehlt für den Karosseriebohrer moderate Drehzahlen und den Einsatz von Schneidöl oder Kühlschmierstoff bei Stahl, um die Wärmeentwicklung zu reduzieren und die Standzeit der geschliffenen Schneide zu verlängern. Bei Unsicherheit berät unser Kundenservice gern telefonisch oder per eMail. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58052-FDA","sku":"58052-FDA","mpn":"58052-FDA","name":"Karosseriebohrer 58052-FDA","description":"Kurzbauender, doppelseitiger HSS-G Karosseriebohrer mit 5,2 mm Durchmesser, 135° Spitzenwinkel, geschliffenem Schaft und blanker Oberfläche; geeignet für präzise Bohrungen in legierten und unlegierten Stählen, Gusseisen und Nichteisenmetallen mit Handbohrmaschine; kompakte Bauform für Karosserie- und Blecharbeiten.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,2 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"62 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"16 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Preis Netto","value":"1.44"},{"@type":"PropertyValue","name":"Spiralänge","value":"16"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Kann der Karosseriebohrer von MetavCUT in Edelstahl eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT (HSS-G) eignet sich für legierte und unlegierte Stähle sowie für Gusseisen und Nichteisenmetalle; bei rostfreien Edelstählen wird erhöhte Kühlung und reduzierte Drehzahl empfohlen, um Überhitzung und vorzeitigen Verschleiß zu vermeiden."}},{"@type":"Question","name":"Wie nutze ich die doppelseitige Ausführung optimal bei dem Karosseriebohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die doppelseitige Ausführung des MetavCUT Karosseriebohrers erlaubt das Umdrehen bei stumpfer Spitze, so steht praktisch eine zweite Schneide zur Verfügung und Rüstzeiten werden reduziert."}},{"@type":"Question","name":"Ist der geschliffene Schaft des MetavCUT Karosseriebohrers für Spannzangen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der geschliffene Schaft des MetavCUT Karosseriebohrers sorgt für verbesserten Rundlauf in Spannzangen und reduziert Vibrationen, wodurch die Standzeit erhöht wird; empfohlen bei stationärer oder stabil aufliegender Handführung."}},{"@type":"Question","name":"Welche Drehzahl und Kühllösung empfiehlt MetavCUT für den Karosseriebohrer bei Stahl?","acceptedAnswer":{"@type":"Answer","text":"MetavCUT empfiehlt moderate Drehzahlen und den Einsatz von Schneidöl oder Kühlschmierstoff bei Stahl, um Wärmeentwicklung zu reduzieren und die Standzeit der geschliffenen Schneide zu verlängern."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/58052-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"Doppelendbohrer"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Kühlmittel empfohlen"},{"@type":"Thing","name":"Spannzangen geeignet"}]}]}

Body Drill (Karosseriebohrer) — Twist Drill, 5.3 mm, 135° point, double sided, bright finished, HSS‑G The Body Drill (Karosseriebohrer) is a double‑ended Twist Drill for Drilling Machines, designed for clean, fast metalworking and reliable performance in demanding fabrication tasks. Double-sided design for two usable tips HSS-G ground for faster, cleaner drilling 135° point for hard and stainless steels Fully ground shank for precise concentricity Bright finish for corrosion resistance Robust design for metalworking that reduces set-up and rework The double‑ended construction of this Twist Drill delivers practical efficiency: when one tip dulls, the second tip is immediately available, effectively providing two usable ends in one tool and minimising downtime. The HSS‑G material and CNC grinding produce very sharp cutting edges that generate clean, precise holes in a wide range of metals. This combination helps reduce rework and improves throughput on shop jobs that demand repeatable hole quality. Faster penetration and lower feed force for tougher materials A 135° point angle is chosen specifically for harder materials such as stainless steel and hardened alloys; it shortens the initial bite and improves tip centring. Because the flute geometry is ground rather than rolled, cutting forces are lower and drilling speed can increase compared with conventional HSS drills. For tasks requiring consistent penetration and reduced operator force, this Twist Drill delivers measurable performance benefits. Precision handling thanks to a fully ground shank The fully ground shank provides superior concentricity and runout control in chucks and collets, which results in more accurate hole placement and less vibration. This advantage is particularly relevant when using portable Drilling Machines for panel work or when registering multiple holes in assemblies. The bright finished surface aids visibility and handling while offering basic corrosion resistance during storage and light use. Clear application scope and simple maintenance advice Engineered for metalworking, the Body Drill is suitable for alloyed and unalloyed steel, cast materials, sintered iron, non‑ferrous metals and hard plastics. For best lifetime performance, use appropriate cutting fluid and moderate speeds when drilling tougher materials; avoid impact loading and consider stationary machines with coolant for prolonged or deep drilling tasks. The double‑ended format is especially convenient for thin sheet and bodywork where short, stable drill lengths are preferred. Choose MetavCUT’s precision HSS‑G Body Drill for dependable metalworking performance — for expert advice or to confirm fitment for your application, contact METAV Werkzeuge; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Body Drill (Karosseriebohrer) Brand/Manufacturer: MetavCUT SKU: 58053-FDA Model Series: Standard Line Diameter: 5.3 mm Overall Length: 62 mm Spiral/Flute Length: 16 mm Point Angle: 135° Type / Execution: double sided Shank Execution: fully ground Material: HSS-G Colour / Finish: bright finished For Use With: Drilling Machine Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill (Twist Drill) used for and where is it best applied? The Body Drill from MetavCUT is a Twist Drill designed primarily for metalworking applications; it is mainly applied when drilling high‑strength materials and larger diameters where a robust tip geometry and clean hole quality are required. Its double‑ended format suits sheet and bodywork where short, stable drills are advantageous. Which three drill types exist in common workshop use? Common drill categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Body Drill belongs to the metal drill group and is optimised for cutting metals rather than timber or stone. Why are Twist Drills pointed (sharpened) and what does that achieve? A pointed tip reduces the cross‑cut at the centre of the Twist Drill and lowers friction at the cutting edges, which decreases the required feed force; sharpening improves centring in the workpiece and helps achieve a cleaner entry and better hole accuracy with less burr formation. Can the MetavCUT Body Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Body Drill can be used in wood, but guidance and centring are generally poorer and the finish will not be as clean as with a dedicated wood bit. Metal drills are easier to resharpen and have less self‑feed, so they can serve in a pinch but are not optimised for woodworking. At which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard choice for through‑hole drilling ("drilling into solid material") and are most frequently used for diameters up to around 20 mm and depths up to approximately 100 mm; the MetavCUT Body Drill is particularly suited to such applications in metalworking. What is better, HSS or HSSE for Twist Drills? There is no universal superiority; HSSE alloys can outperform standard HSS under specific conditions, but the choice depends on the working environment and cost‑benefit analysis. For many metalworking tasks the HSS‑G grade of the MetavCUT Body Drill offers an excellent balance of sharpness and durability at a reasonable price.