Spiralbohrer Kurz HSS, 9,9 mm, 118°, Typ N, schwarz, DIN 338 von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338 für präzise Metallbohrungen mit 9,9 mm Durchmesser und eignet sich besonders für den Einsatz an Handbohrmaschinen. MetavCUT Spiralbohrer, HSS, kurz, DIN 338 9,9 mm Durchmesser für Standard-Metallbohrungen Typ N Normalspirale, optimiert für Stahl und Eisen 118° Spitzenwinkel für zügigen Anbohrvorgang Kurze Ausführung für erhöhte Stabilität und Präzision Höhere Stabilität durch kurze Ausführung und HSS-Werkstoff Der kurze HSS-Spiralbohrer liefert eine deutlich reduzierte Auskraglänge, was die Stabilität beim Bohren erhöht und Vibrationen verringert. Dank des verwendeten HSS (Schnellarbeitsstahl) bleibt die Schneidkante bei normalen Metallbearbeitungen lange scharf, wodurch weniger Nacharbeiten erforderlich sind. Die Konstruktion nach DIN 338 steht für die standardisierte kurze Spiralform mit Zylinderschaft, wodurch die Handhabung an stationären und mobilen Bohrmaschinen vereinfacht wird. Präzise Bearbeitung von Stahl und sonstigen Metallen Mit einem Durchmesser von 9,9 mm fällt dieser Bohrer in den Standard-Bereich für Metallbearbeitung; dadurch ist er besonders geeignet für Werkstatt, Montage und DIY-Projekte mit dünnen bis mittleren Blechen und Profilen. Die Normalspirale (Typ N) gewährleistet zuverlässigen Spanabtransport bei üblichen Werkstoffen wie legiertem und unlegiertem Stahl sowie Gusseisen. Der 118° Spitzenwinkel erleichtert das Anbohren und sorgt für kontrollierten Vorschub ohne übermäßiges Wandern des Bohrers. Praktische Anwendungstipps für sicheres Arbeiten Vor dem Bohren empfiehlt sich das Anpunkten bzw. Zentrieren, um den Bohrer exakt zu führen und Ausbrüche zu vermeiden. Für längere Standzeiten ist der Einsatz geeigneter Kühlschmierstoffe bei hartem Material empfehlenswert; bei normalen Arbeiten in nicht gehärteten Stählen genügen moderate Schnittzahlen und angemessener Vorschub. Die kurze Spirallänge fördert die Präzision, reduziert aber gleichzeitig die Eignung für sehr tiefe Bohrungen — hier ist schrittweises Aufbohren oder der Einsatz längerer Bohrer ratsam. Vertrauen Sie auf den MetavCUT Spiralbohrer in kurzer Ausführung: mit HSS-Material, 118° Spitzenwinkel und 9,9 mm Durchmesser bietet dieser Bohrer stabile Präzision für Metallarbeiten — bei Fragen berät METAV Werkzeuge gern per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40099-FDA Durchmesser: 9,9 mm Material: HSS (Schnellarbeitsstahl) Ausführung: kurz Typ: Typ N (Normalspirale) Spitzenwinkel: 118° Farbe: schwarz Gesamtlänge: 133 mm Spirallänge: 87 mm Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der MetavCUT Spiralbohrer (Typ N) für Handbohrmaschinen geeignet? Der MetavCUT Spiralbohrer in kurzer Ausführung wurde für den Einsatz an Handbohrmaschinen konzipiert und bietet durch die reduzierte Auskraglänge erhöhte Stabilität, sodass er sich für typische Werkstattanwendungen in Metall gut eignet. Für welche Materialien ist der Spiralbohrer von MetavCUT am besten geeignet? Der MetavCUT Spiralbohrer (Typ N, HSS) ist besonders geeignet für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; weiche Werkstoffe wie Aluminium lassen sich ebenfalls bearbeiten, bei sehr weichen Materialien ist jedoch ein speziellerer Bohrertyp zu prüfen. Wie beeinflusst der 118° Spitzenwinkel die Leistung des Spiralbohrers? Der 118° Spitzenwinkel des MetavCUT Spiralbohrers erleichtert das Anbohren und sorgt für kontrollierten Vorschub bei üblichen Metallwerkstoffen; bei besonders harten Materialien kann ein größerer Winkel sinnvoll sein, abhängig von der Anwendung. Welche Pflege verlängert die Lebensdauer des MetavCUT Spiralbohrers? Regelmäßiges Entgraten, passende Kühlschmierstoffe bei zähen Werkstoffen und das Vermeiden von Überhitzung während des Bohrens tragen bei dem MetavCUT Spiralbohrer dazu bei, die Schneidkante länger scharf zu halten. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40099-FDA","sku":"40099-FDA","mpn":"40099-FDA","name":"Spiralbohrer 40099-FDA","description":"Kurzer HSS-Spiralbohrer nach DIN 338, 9,9 mm Durchmesser, Typ N Normalspirale, 118° Spitzenwinkel, schwarz; geeignet für Metallbohrungen an Handbohrmaschinen und für Werkstatt, Montage und DIY-Anwendungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Durchmesser","value":"9,9 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"133 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"87 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der MetavCUT Spiralbohrer (Typ N) für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer in kurzer Ausführung wurde für den Einsatz an Handbohrmaschinen konzipiert und bietet durch die reduzierte Auskraglänge erhöhte Stabilität, sodass er sich für typische Werkstattanwendungen in Metall gut eignet."}},{"@type":"Question","name":"Für welche Materialien ist der MetavCUT Spiralbohrer am besten geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer (Typ N, HSS) ist besonders geeignet für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; weiche Werkstoffe wie Aluminium lassen sich ebenfalls bearbeiten, bei sehr weichen Materialien ist jedoch ein speziellerer Bohrertyp zu prüfen."}},{"@type":"Question","name":"Wie beeinflusst der 118° Spitzenwinkel die Leistung des Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel des MetavCUT Spiralbohrers erleichtert das Anbohren und sorgt für kontrollierten Vorschub bei üblichen Metallwerkstoffen; bei besonders harten Materialien kann ein größerer Winkel sinnvoll sein, abhängig von der Anwendung."}},{"@type":"Question","name":"Welche Pflege verlängert die Lebensdauer des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Regelmäßiges Entgraten, passende Kühlschmierstoffe bei zähen Werkstoffen und das Vermeiden von Überhitzung während des Bohrens tragen bei dem MetavCUT Spiralbohrer dazu bei, die Schneidkante länger scharf zu halten."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40099-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz HSS"},{"@type":"Thing","name":"MetavCUT Bohrer"},{"@type":"Thing","name":"DIN 338 Standard"}],"mentions":[{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Handbohrmaschine geeignet"},{"@type":"Thing","name":"HSS Schnellarbeitsstahl"}]}]}

Spiralbohrer kurz HSS-E 9,9 mm · 135° Spitzenwinkel · Typ N · 5% kobaltlegiert · geschliffen · DIN 338 · MetavCUT Der Spiralbohrer ist ein kurzer, geschliffener HSS-E Bohrer zur präzisen Bearbeitung von Metall und bietet hohe Stabilität bei stationären und handgeführten Anwendungen. Kurze Ausführung für verbesserte Stabilität Geschliffen für hohe Rundlaufgenauigkeit 5% kobaltlegiert für bessere Warmfestigkeit 135° Spitzenwinkel für harte Werkstoffe Spirallänge 87 mm bei Gesamtlänge 133 mm Hohe Stabilität und saubere Bohrbilder dank kurzer Bauform Die kurze Ausführung dieses Kurzbohrers reduziert die Auskraglänge und verringert dadurch das Risiko von Verbiegen und Ausschlagen. Durch die erhöhte Steifigkeit entsteht ein gleichmäßigeres Schnittbild und sauberere Bohrlöcher, was besonders bei Stahl und legierten Werkstoffen von Vorteil ist. Anwender profitieren von geringerer Nacharbeit und präziseren Passungen bei Serien- und Einzelteilen. Materialqualität und Schneidcharakteristik für anspruchsvolle Metallbearbeitung Der Bohrer besteht aus HSS-E mit 5% kobaltlegiertem Werkstoff, wodurch sich die Warmfestigkeit und Verschleißbeständigkeit gegenüber normalem Schnellarbeitsstahl verbessert. Die geschliffene Schaft- und Schneidgeometrie sorgt für scharfe Kanten und hohe Rundlaufgenauigkeit, eignet sich daher besonders für präzise Metallbohrungen. Der 135° Spitzenwinkel erleichtert den Anbohrvorgang in harten Stählen und reduziert das Abkippen beim Einschneiden. Vielseitige Einsatzbereiche im Werkstattalltag und bei Montagearbeiten Mit einem Durchmesser von 9,9 mm liegt der Bohrer im Standard-Bereich und ist ideal für Werkstatt, Montage und DIY-Projekte geeignet. Er bearbeitet legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe zuverlässig. Durch die Kombination aus DIN 338 Norm und Typ N Geometrie eignet sich der Bohrer für Handbohrmaschine ebenso wie für stationäre Säulenbohrmaschinen, solange auf passende Kühlschmierstoffe und korrekte Drehzahlen geachtet wird. Anwendungstipps zur Lebensdauer und Prozesssicherheit Vor dem Bohren empfiehlt sich das Anpunkten mit einem Zentrierbohrer zur Verbesserung der Positioniergenauigkeit; bei geschliffenen Bohrern sollte Kühlung eingesetzt werden, um Überhitzung zu vermeiden. Die Spirallänge 87 mm und die Gesamtlänge 133 mm geben Auskunft über Einspanntiefe und Handhabung; der Zylinderschaft erlaubt sicheren Halt im Bohrfutter. Regelmäßiges Entfernen von Spänen und moderate Vorschubgeschwindigkeiten verlängern die Standzeit. MetavCUT empfiehlt den Einsatz dieses geschliffenen HSS-E Kurzbohrers für präzise Metallbohrungen; bei Fragen zur Auswahl oder Anwendung steht METAV Werkzeuge mit technischer Beratung zur Seite – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930, WhatsApp: +49 170 2837271 Bezeichnung: Spiralbohrer kurz HSS-E 9,9 mm, Typ N, geschliffen Marke: MetavCUT SKU: 47099-FDA Durchmesser: 9,9 mm Spitzenwinkel: 135° Material: HSS-E Ausführung: kurz Schaft Ausführung: geschliffen Spirallänge: 87 mm Gesamtlänge: 133 mm Typ: Typ N Norm: DIN 338 Farbe: 5% kobaltlegiert Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Werkstoffe bearbeitet der Spiralbohrer von MetavCUT am besten? Der Spiralbohrer von MetavCUT mit HSS-E und 5% kobaltlegiert ist besonders geeignet für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; bei härteren Werkstoffen sorgt der 135° Spitzenwinkel für stabiles Anbohren. Eignet sich der Spiralbohrer von MetavCUT für die Handbohrmaschine? Ja, der Spiralbohrer von MetavCUT fällt in den Standard-Bereich und kann mit einer Handbohrmaschine verwendet werden; für beste Ergebnisse wird Anpunkten, kontrollierte Drehzahl und Kühlung empfohlen. Warum ist der Spiralbohrer geschliffen und was bedeutet das für den Anwender? Die geschliffene Ausführung des Spiralbohrers von MetavCUT liefert sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was präzise Bohrlöcher ermöglicht; gleichzeitig sollte auf passende Kühlung und stationäre Spannbedingungen geachtet werden, da geschliffene Bohrer empfindlicher gegenüber Verschleiß und Bruch sein können. Welche Vorteile bietet die 5% Kobaltlegierung beim Spiralbohrer von MetavCUT? Die 5% kobaltlegierte Zusammensetzung des Spiralbohrers von MetavCUT erhöht die Warmfestigkeit und Standzeit bei höheren Schnitttemperaturen, wodurch der Bohrer robuster bei der Bearbeitung von zähen oder legierten Stählen ist. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#47099-FDA","sku":"47099-FDA","mpn":"47099-FDA","name":"Spiralbohrer 47099-FDA","description":"Kurzer Spiralbohrer HSS-E 9,9 mm, 135° Spitzenwinkel, Typ N, 5% kobaltlegiert, geschliffen, DIN 338; Kurzbohrerausführung für präzise Metallbearbeitung mit hoher Stabilität und Rundlaufgenauigkeit.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer kurz HSS-E 9,9 mm, Typ N, geschliffen"},{"@type":"PropertyValue","name":"Durchmesser","value":"9,9 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"5% kobaltlegiert"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS-E"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"87 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"133 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}],"brand":null},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Werkstoffe bearbeitet der Spiralbohrer am besten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer kurz HSS-E 9,9 mm von MetavCUT mit 5% kobaltlegiert eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; der 135° Spitzenwinkel erleichtert das Anbohren härterer Werkstoffe."}},{"@type":"Question","name":"Eignet sich der Spiralbohrer für die Handbohrmaschine?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer kurz HSS-E 9,9 mm von MetavCUT ist für Handbohrmaschine geeignet; für beste Ergebnisse empfiehlt sich Anpunkten, kontrollierte Drehzahl und Kühlung."}},{"@type":"Question","name":"Was bedeutet geschliffen beim Spiralbohrer und welche Folgen hat das?","acceptedAnswer":{"@type":"Answer","text":"Geschliffen bedeutet, dass Spannuten und Geometrie per CNC geschliffen sind; das liefert sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, erfordert aber Kühlung und schonende Handhabung, da geschliffene Bohrer spröder sein können."}},{"@type":"Question","name":"Welche Vorteile bringt die 5% Kobaltlegierung beim Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Die 5% kobaltlegiert Zusammensetzung erhöht die Warmfestigkeit und Standzeit bei höheren Schnitttemperaturen, wodurch der Spiralbohrer von MetavCUT robuster bei der Bearbeitung zäher oder legierter Stähle ist."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/47099-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer kurz HSS-E"},{"@type":"Thing","name":"DIN 338 Norm"},{"@type":"Thing","name":"MetavCUT Standard Line"}],"mentions":[{"@type":"Thing","name":"Geschliffene Schaftgeometrie"},{"@type":"Thing","name":"5% Kobaltlegierung"},{"@type":"Thing","name":"135° Spitzenwinkel für harte Werkstoffe"},{"@type":"Thing","name":"Zylinderschaft"}]}]}

Twist Drill — Type N, 9.9 mm, 135° tip, short, bright finished, HSS‑G, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS‑G drill for precision metal drilling, designed for use in hand and machine drilling applications. Short design for improved stability 135° tip for hard materials HSS‑G fully ground for precise holes Conforms to DIN 338 for metalworking Precision and performance for demanding metalwork Designed for accurate metal drilling, this HSS‑G short Twist Drill delivers consistently clean holes with high roundness. The fully ground geometry produces very sharp cutting edges and excellent runout characteristics, which reduces burr formation and improves hole quality. For users seeking reliable results in alloyed and unalloyed steels, the combination of Type N spiral and a 135° point angle supports controlled penetration and reduces lateral wandering during the initial drill entry. Short length for stability and faster operation Because the bit has a reduced protruding length, the short design significantly increases rigidity and lowers the tendency to bend under load. This leads to measurable workflow benefits: the grinded HSS geometry enables drilling up to 40% faster while requiring 50% less feed force compared with conventional HSS variants. Contractors and workshop technicians working on small setups or clamped workpieces profit from improved precision and less chatter when using a compact, robust drill of this design. Geometry and materials optimised for hard materials The 135° tip angle is chosen specifically to assist drilling into harder materials such as stainless steel and tempered components; a larger point angle shortens initial bite time while maintaining tool life. The designation DIN 338 classifies this short Twist Drill with a cylindrical shank and describes the ground manufacturing process; grinding (HSS‑G) creates sharp cutting lips but can make the tool more brittle, so coolant and steady machine setup are advisable to avoid premature breakage. Who benefits and practical usage advice This Twist Drill is targeted at professional users and advanced hobbyists needing reliable metal drilling — especially for precision work on lathe‑mounted or stationary drilling machines and well‑supported handheld drilling operations. The fully ground shank ensures good chucking accuracy; for best results, secure the workpiece, use appropriate cutting fluid and moderate feed, and avoid excessive overhang. MetavCUT’s short series is particularly suitable when stability and accuracy are priorities over reach. Strongly recommended: choose the MetavCUT short HSS‑G Twist Drill Type N for demanding metal applications — for personalised technical advice and ordering support contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45099-FDA Diameter: 9.9 mm Tip angle: 135° Type: Type N Execution: Short Colour: Bright finished Material: HSS‑G Shank finish: Fully ground Spiral length: 87 mm Overall length: 133 mm For drill machine: Drilling Machine (Hand drill) Model series: Standard Line Norm: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit them best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is especially effective on alloyed and unalloyed steels, cast materials and non‑ferrous metals. Its geometry and 135° point make it suitable for harder workpieces where accurate centring and reduced walking are required. Which three drill types are commonly distinguished? In general practice three main categories are identified: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for machining metallic materials. Can the MetavCUT Twist Drill be used in a handheld drill or only in machine tools? The short design of the MetavCUT Twist Drill Type N improves rigidity and makes it suitable for both well‑supported handheld drilling and stationary machine tools; however, optimum precision is achieved in clamped or machine setups with appropriate cooling. Why is the tip of a Twist Drill ground to a specific angle? The 135° tip on the MetavCUT Twist Drill reduces initial cutting forces and improves centring in hard materials; grinding the tip also reduces the cross‑cut width, lowering friction and the required feed, which helps achieve cleaner holes with less tool wear.

Twist Drill — Type N short, Ø 9 mm, 118° tip, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N short is a high‑stability HSS metal drill designed for precise holemaking in steel and other metals with a 9 mm diameter and a 118° tip angle. Short HSS design for enhanced stiffness 9 mm diameter for standard metal holes 118° tip for reliable centering Complies with DIN 338 for short twist drills Black finish for corrosion resistance Precision and durability from HSS material High Speed Steel (HSS) gives this Twist Drill outstanding elasticity and resistance to fracture during common metalworking tasks. The HSS composition is especially suitable for drilling alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics, providing dependable tool life under typical workshop conditions. The short execution reduces flex and vibration, resulting in consistently round holes and longer tool service intervals. Better control and centering with a 118° tip A 118° point angle improves centering on curved or slightly irregular surfaces and reduces walking at the drill start, which is useful when producing clean, accurate holes in softer steels and aluminium. Because the tip geometry affects feed forces and heat generation, this configuration balances penetration speed and control for general metalworking. Users benefit from fewer re‑drills and faster set‑up when precision is required. Stable short design according to DIN 338 Manufactured to DIN 338, the short twist drill format prioritises stiffness and dimensional accuracy. This Type N short design minimizes overhang from the chuck, lowering the risk of bending and enabling higher feed rates on both portable and stationary drilling machines. MetavCUT’s adherence to this standard means predictable performance and interchangeability with other DIN‑compliant tooling in professional environments. Practical use recommendations for workshop and on‑site work When using this MetavCUT Twist Drill in a drilling machine or a hand drill, moderate cutting speeds and steady feed ensure optimal results; excessive speed can shorten tool life. For holes up to moderate depths, the short overall length (125 mm) and spiral length (81 mm) improve chip evacuation and reduce runout. Professionals and serious hobbyists will appreciate the combination of robustness and ease of resharpening that HSS tools offer. Highly recommended: For precise metal drilling choose the MetavCUT Twist Drill Type N short in HSS for reliable centering and enhanced stiffness — for personalised technical advice METAV Werkzeuge provides expert consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40090-FDA Diameter: 9 mm Point angle: 118° Type: Type N Colour: black Version: short Material: HSS Standard: DIN 338 Spiral length: 81 mm Overall length: 125 mm Application: Drills for metal For use with: Drilling Machine / Hand Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N short best used for? The MetavCUT Twist Drill Type N short is intended primarily for drilling metal; it excels in producing accurate holes in alloyed and unalloyed steel, cast iron and non‑ferrous metals thanks to its HSS construction and short, stiff geometry. Can this Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill short execution can be used in a hand drill or a drilling machine, but best results come from steady speeds and controlled feed to maintain centering and to avoid excessive wear. What are Twist Drills used for? Twist Drills are mainly applied when machining high‑strength materials and larger diameters. Their form allows straightforward resharpening and sustains higher loads; the design suits metalworking and larger bore tasks. Which three drill types exist? There are three principal drill types: Metal drills, Wood drills and Stone/Concrete drills.

Twist Drill – Short HSS‑E Type N, Ø 9 mm, 135°, 5% Cobalt‑Alloyed, DIN 338 (MetavCUT) The Twist Drill from MetavCUT is a short Type N drill for precise metalworking, especially suited to drilling hard and alloyed steels with a 135° tip angle. Short design for high stability 135° tip for hard materials Fully ground flutes for precise holes HSS‑E with 5% cobalt for heat resistance Conforms to DIN 338 for short drills Greater Precision through Short Design and Material Choice The short Execution reduces overhang and increases Stability, which is particularly beneficial when machining hard metals. Manufactured in HSS‑E with 5% Cobalt‑Alloyed composition, the tool offers improved heat resistance and wear behaviour compared with standard HSS. As a result, operators achieve cleaner holes and longer tool life when performing demanding Metalworking tasks on stationary or portable Drilling Machines. Clean Holes and High Runout Accuracy with Ground Geometry A Fully ground flute geometry produces very sharp cutting edges and excellent Runout Accuracy, ideal for precision applications. The Type N spiral geometry is the classic choice for Metal Drilling and generates reliable chip evacuation in many alloys. Note that ground drills can be more brittle than rolled variants, therefore using appropriate cooling and careful feed rates on tougher Materials is recommended to avoid breakage. Designed for Metalworking: Recommended Applications and Users This MetavCUT Twist Drill is intended for drilling Alloyed and Unalloyed Steel, Cast Iron, Non‑Ferrous Metals and certain Plastics; it is well suited to workshop technicians, maintenance teams and precision machinists. The short overall length and stable shank make it especially useful for operations requiring minimal deflection, such as jig and fixture work or when using a Hand Drill for controlled site repairs. 135° Point Angle: Faster Penetration and Better Centering in Hard Materials A 135° Point Angle helps reduce the tendency to wander on the surface of hard materials and shortens the initial penetration time compared with steeper points. This geometry lowers the cutting forces on the central tip and improves centring on Stainless Steel and other tough alloys, enabling more dependable starts and reducing the need for pilot operations in many cases. Standard Compliance and Practical Handling Notes Conforming to DIN 338 ensures consistent dimensions and interchangeability for short Twist Drills with cylindrical shank. The Standard Line manufacturing and the Fully Ground Shaft Execution ensure predictable performance across batches. For best results, pair the drill with appropriate coolant and moderate spindle speeds when working in high‑tensile steels; this preserves edge integrity and reduces the risk of chipping. Strong recommendation: choose the MetavCUT Twist Drill (Short Type N, HSS‑E) for demanding metal drilling tasks — for tailored advice or supplementary technical data contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 47090-FDA Diameter: 9 mm Point angle: 135° Type: Type N Execution: Short Colour: 5% cobalt-alloyed Material: HSS‑E Shaft execution: Fully ground Overall length: 125 mm Spiral length: 81 mm Model series: Standard Line Norm: DIN 338 For drilling machine: Drilling Machine (Hand Drill) Application: Drills for metal Packaging unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its geometry allows straightforward regrinding and it withstands greater mechanical loads, making it a standard choice for robust Metalworking tasks. Which three drill types exist? Common categories are Metal drills, Wood drills and Stone/Concrete drills, and the MetavCUT Twist Drill belongs to the Metal drill group suited for ferrous and non‑ferrous Materials. Can the MetavCUT Twist Drill be used for wood? The MetavCUT Twist Drill can be used in Wood, but as a Metal drill it offers less guidance and a rougher finish than dedicated Wood drills; it is easier to resharpen and shows lower self‑feeding tendency compared with specialised wood brad point drills.

Twist Drill by MetavCUT — 9 mm, 135° Tip, Extra Long, Bright Finished, HSS‑G, DIN 1869, Fully Ground Shank A Twist Drill designed for deep metal drilling with Drilling Machines and engineered for high precision and reduced feed force. Extra long design for deep drilling HSS‑G ground for faster metal cutting 135° tip geometry for hard materials Fully ground shank for high runout accuracy Conforms to DIN 1869 for demanding applications Faster drilling with lower feed force for efficient workflows The HSS‑G construction delivers up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS drills, making it ideal where productivity matters. Designed as an extra long variant, this drill enables deeper hole depths and greater reach without sacrificing concentricity. For workshop and industrial use, the combination of high cutting speed and reduced operator exertion translates into measurable time savings and less operator fatigue. Reliable centring and clean holes even in tough alloys With a 135° tip angle and a ground flute geometry, this tool penetrates harder materials more effectively and reduces walking at the start of the hole. The CNC ground flutes provide sharp cutting edges and excellent runout accuracy, resulting in precise, burr‑reduced holes in Grauguss, legierten and unlegierten Stahl, and non‑ferrous metals. The geometry is optimised to support drilling in applications up to the material classes indicated by DIN 1869. Built for deep and difficult penetrations The extended overall length and a spiral length of 175 mm allow drilling where standard lengths fail, for example deep assemblies or awkward fixturing. The bright finished surface offers good chip evacuation characteristics in conjunction with appropriate coolant, while the fully ground shank ensures consistent clamping in chucks and reduced vibration. Use with a suitable Drilling Machine and controlled coolant flow for best results in prolonged or stationary operations. Who benefits and how to use it correctly Manufacturers, toolrooms and maintenance teams that require repeatable, precise holes in harder metals will value this design. For optimal life and performance, use stable fixturing, appropriate spindle speeds and coolant when working with high‑strength steels. Because ground HSS drills can be more brittle than rolled types, avoid excessive lateral loading and prefer stationary machine setups for deepest holes and continuous production runs. Strong recommendation: Choose the MetavCUT Twist Drill for precise deep‑hole metalworking — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge for expert support via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 32090-FDA Diameter: 9 mm Tip Angle: 135° Execution: Extra long Total Length: 250 mm Spiral Length: 175 mm Material: HSS‑G Shank Execution: Fully ground Colour: Bright finished Application: Drills for metal For Drilling Machine: Drilling Machine Standard: DIN 1869 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily intended for drilling into metals; its HSS‑G composition and 135° tip make it especially suitable for alloyed and unalloyed steels, cast iron and non‑ferrous metals. Use in a properly set up Drilling Machine with cooling for best results. Which three general drill types exist? The three main drill categories are metal drills, wood drills, and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking tasks.

Twist Drill — Twist Drill, Diameter 9 mm, 135° Tip, Extra Long, Bright Finished, HSS‑G, DIN 1869 The Twist Drill is an extra‑long HSS‑G drill bit for drilling machines, designed for deep metal drilling and precise holemaking in alloyed and unalloyed steels. Extra long design for deep drilling 9 mm diameter with 135° tip angle HSS‑G fully ground for precise bores Conforms to DIN 1869 for deep‑hole work Precision and material: ground HSS for clean metal holes The fully ground HSS‑G geometry delivers high concentricity and sharp cutting edges, producing clean, precise holes in metal. Grinding the flutes rather than rolling creates a sharper cutting profile, which reduces chatter and improves roundness when used with appropriate feed and coolant. This makes the bit particularly suitable for alloyed and unalloyed steel, cast iron and non‑ferrous metals where hole quality and dimensional accuracy are required. Deep drilling capability: extra length for difficult access With an extra long overall length and an extended spiral, this design allows drilling in deep parts or where access from the rear is restricted. The extended spiral assists chip evacuation during deeper cuts, reducing the risk of clogging. For tasks requiring long reach, the extra‑long execution provides the working length necessary without compromising guidance when used in a suitable drilling machine and with correct cooling. Tip geometry and performance: 135° for harder materials A 135° tip angle reduces the tendency to wander and shortens centring time on harder workpieces such as stainless steel. The larger tip angle reduces the aggressiveness of the lead, distributing cutting forces over a broader area and often requiring less feed force. For demanding materials, the combination of tip geometry and HSS‑G composition improves tool life when adequate coolant and a stable setup are used. Practical use and user group: suited for workshops and industrial settings This twist drill was developed for professional workshops and industrial users who need reliable deep drilling in metals. It is best applied in drilling machines under steady clamping and with cooling. Compared with rolled types, the ground version can be re‑sharpened more easily to renew cutting edges, making it advantageous for users who perform maintenance on tooling and value reproducibility and finish. Strong recommendation: Choose the MetavCUT Twist Drill in extra‑long HSS‑G execution for demanding deep metal drilling — for technical advice or to confirm suitability for a specific application, METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33090-FDA Diameter: 9 mm Tip Angle: 135° Execution / Type: Extra Long Colour: Bright Finished Material: HSS‑G Shaft Execution: Fully Ground Spiral Length: 220 mm Overall Length: 320 mm Standard: DIN 1869 Application: Drills for Metal Model Series: Standard Line For Use In: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied for drilling high‑strength workpieces and larger diameters in metal; its extra‑long HSS‑G design and DIN 1869 specification make it suitable for deep drilling where extended reach and durable cutting performance are required. Which three drill types exist? Common categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks. For what is a Twist Drill mainly used? A Twist Drill is mainly used for machining high‑strength materials and larger hole diameters; its form allows straightforward resharpening and it withstands higher loads in demanding applications. Why are twist drills pointed? The point reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction and feed forces while improving centring in the workpiece; a pointed geometry therefore eases penetration and enhances accuracy.

Twist Drill — Extra Long Twist Drill, 9 mm, 135° tip, HSS‑G, Bright Finished (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill designed for deep metal drilling with a 9 mm diameter and a 135° tip for hard materials. Extra‑long design for deep, hard‑to‑reach holes 9 mm Diameter for precise metal drilling 135° Tip angle optimised for harder materials HSS‑G ground for fast, clean cuts DIN 1869 compliant for demanding deep‑hole work Precision and performance for deep metal holes The MetavCUT extra‑long HSS‑G twist drill combines a generous overall length with a long Spiral to enable deep‑reach drilling where standard lengths fall short. Thanks to the fully ground flute geometry, the bit produces very sharp cutting edges and high run‑out accuracy, which results in cleaner, more precise holes in metals. For workshop and industrial environments this means fewer re‑cuts, improved fit‑up of components and more predictable machining results under challenging conditions. Faster cutting with less feed force The ground HSS‑G material and optimised geometry allow up to 40% faster drilling and require up to 50% less feed force compared with conventional HSS drills. This makes the tool especially effective when working with alloyed and unalloyed steel, cast steel, cast iron and non‑ferrous metals. The 135° tip angle reduces initial cutting resistance and improves centring on harder materials, shortening set‑up time and increasing throughput on serial operations. Reliable choice for demanding standards and deep drilling Conforming to DIN 1869, this twist drill is built for deep‑hole applications and tougher conditions. The Spiral length of 280 mm and total length of 410 mm are tailored for situations that require extended reach without compromising hole quality. Because the flutes are formed by CNC grinding rather than rolling, users benefit from superior surface finish and dimensional accuracy—features that matter when subsequent machining or assembly demands tight tolerances. Practical workshop guidance and safe use When using this extra‑long Twist Drill in tougher materials, stationary mounting and adequate cooling are recommended to avoid brittle fracture and to extend tool life. The fully ground shank supports better clamping accuracy in chucks and collets, reducing vibration and ensuring concentricity. For operators less familiar with deep‑hole techniques, using modest spindle speeds, steady feed and cutting fluid will deliver the best balance between speed and tool life. Who benefits from this tool This drill is aimed at metalworkers, toolrooms and maintenance professionals who require extended reach and high‑quality holes in harder materials. Whether producing components in small series or performing repair work on assemblies where access is limited, the MetavCUT twist drill offers a practical combination of depth capability and metal‑cutting performance. Strongly recommended: the MetavCUT extra‑long HSS‑G Twist Drill for reliable deep metal drilling — for technical advice or application support contact METAV Werkzeuge; we provide comprehensive consultation and sample guidance via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT Model series: Standard Line Diameter: 9 mm Total length: 410 mm Spiral length: 280 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: Extra long Colour: Bright finished Shaft finish: Fully ground Suitable for: Drilling Machine / Hand drill Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill best suited for? The MetavCUT Twist Drill (extra‑long HSS‑G Twist Drill) is particularly suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics, offering robust performance where higher strength and precision are required. Is the MetavCUT Twist Drill suitable for very deep holes? Yes, the MetavCUT extra‑long Twist Drill is designed for deep holes: its extended overall length and the Spiral length make it suitable for deep‑reach applications, and compliance with DIN 1869 underlines its suitability for demanding drilling tasks. For what is a Twist Drill used? It is mainly used for machining high‑strength materials and large bore diameters. This design is easy to resharpen and withstands higher loads. Which three drill types exist? There are metal drills, wood drills and stone/concrete drills. Why are Twist Drills tipped/sharpened? Sharpening reduces the secondary cutting edge at the tip of the Twist Drill, lowering friction forces and thus requiring less feed force while improving centring in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood but gives poorer guidance and a less clean result; it is easier to regrind and has lower self‑feeding characteristics. For which depths is the Twist Drill the most used tool? A full‑bore hole is made with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool.

Twist Drill — Type N, 9 mm, 135° tip, short, bright finished, HSS-G, DIN 338 (MetavCUT) A short, precision Twist Drill Type N designed for metalworking with a 9 mm diameter and a 135° point angle for stable, clean drilling in hard materials. Short design for higher stability HSS‑G ground for fast, precise drilling 135° point for hard materials like stainless steel Conforms to DIN 338 for short cylindrical drills Fully ground shank for excellent concentricity Durable HSS‑G construction for reliable metalworking The HSS‑G material offers a balance of hardness and edge retention that benefits demanding metalworking tasks. Built as a ground High Speed Steel tool, this short drill delivers sharp cutting edges and high runout accuracy, which reduces burr formation and improves hole quality. For users who prioritize precision, the ground geometry translates into cleaner bores and fewer reworks, while the bright finished surface aids chip evacuation during cutting. Short design increases stability and precision A reduced overall length and a shorter Spiral length improve stiffness during drilling, so less bending occurs under load. This compact geometry is particularly useful when machining legiertem und unlegiertem Stahl and other hard metals, where a rigid tool axis is essential. The shorter overhang results in increased feed stability, enabling higher feed rates in many setups without sacrificing hole accuracy. 135° tip and Type N spiral for hard materials The 135° point angle is tailored to cut into harder materials with reduced tendency to wander at entry, making it suitable for stainless steel and other tougher alloys. As a Type N (normal spiral) configuration, the tool is optimized for metal drilling rather than soft substrates. For less experienced users: a larger tip angle decreases the initial cutting aggressiveness and improves centering, which helps when starting holes in tough components. Precise shank and DIN 338 compliance for machine use With a fully ground shank, the drill provides excellent concentricity and grip in standard drill chucks and toolholders, reducing runout and wear. Conformance to DIN 338 ensures standardized dimensions and compatibility with common tool setup procedures in production and workshop environments. These characteristics make the tool well suited to both stationary machines and portable drilling machines used in metal fabrication. Who benefits and recommended applications Mechanical workshops, toolrooms and production engineers working with steels, cast materials and non‑ferrous metals will find the short Twist Drill especially advantageous for precision holemaking. Its properties support drilling in components where surface finish and positional accuracy matter. For simple explanations: HSS‑G denotes a ground High Speed Steel drill, Type N indicates the classic metal spiral, and the 135° tip suits harder substrates. Strong recommendation: For precision metal drilling choose the MetavCUT short Twist Drill Type N with HSS‑G ground geometry — METAV Werkzeuge offers expert advice and technical support if needed. If unsure whether this tool meets specific requirements or if additional technical data is required, please contact us — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45090-FDA Diameter: 9 mm Point angle: 135° Type: Type N Execution: short Overall length: 125 mm Spiral length: 81 mm Shank execution: fully ground Material: HSS-G Finish: bright finished For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Norm: DIN 338 Colour: bright finished Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Type N drill? The Twist Drill by MetavCUT, Type N, is primarily used for drilling metal; it is ideal for legiertes und unlegiertes Stahl, Gussstahl, Gusseisen and non‑ferrous metals. The Type N spiral and HSS‑G ground geometry ensure reliable cutting in harder materials and give good hole quality in workshop and production settings. Which three drill types exist and where does the MetavCUT Twist Drill fit? Three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill is a metal drill (Type N) and is specifically engineered for use in metalworking rather than for wood or stone. Why is the tip of a Twist Drill sharpened and how does that help in practice? The tip sharpening reduces the cross‑cut edge at the drill point, lowering friction and required feed force. For the MetavCUT Twist Drill Type N this means easier entry, better centering and reduced heat generation, resulting in cleaner holes and longer tool life when combined with appropriate cooling. Can the MetavCUT Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but it will usually offer less guidance and a rougher finish than a dedicated wood drill. Metal drills are easier to resharpen and exhibit less self‑feeding, so they may require more careful positioning when used in timber.

Twist Drill — Short HSS-G Type N, 9 mm, 135°, TiN-coated, DIN 338 The Twist Drill is a short HSS-G metalworking drill bit (Type N) designed for precision drilling in hard materials and optimised for use in drilling machines. Short design for higher stability TiN-coated for extended tool life Fully ground shank for cleaner holes 135° tip for hard metals and stainless steel Conforms to DIN 338 for short drill bits Durable Material and Coating for Long Service Life The short HSS-G construction combined with the TiN-coated surface reduces friction and wear during metalworking, which translates into a significantly longer lifetime under continuous use. With a 9 mm diameter and a flute length of 81 mm, this bit is especially suited for alloyed and unalloyed steel, cast iron, sintered iron, nickel silver, copper, bronze and hard plastics. The TiN layer lowers surface temperature and, when used with appropriate cooling, decreases abrasive wear and maintains cutting performance over prolonged operations. Stable Short Design for Precise, Efficient Drilling Thanks to the reduced overhang of the short execution, this Twist Drill provides superior stability and resists bending under load, enabling more accurate hole positions and improved concentricity. The fully ground geometry yields sharp cutting edges and high running accuracy, allowing up to 40% faster penetration and requiring about 50% less feed force compared with conventional HSS drills. These advantages make it a reliable choice for demanding production and workshop environments where precision and throughput matter. Optimised Tip Geometry and Suitable Applications The 135° point angle is tailored for harder materials and stainless steel: it shortens the initial penetration time and improves centring on tough surfaces. As a Type N normal-spiral bit, the tool excels at general metal drilling tasks and is intended primarily for use with drilling machines. Typical fields of application include maintenance, toolrooms and manufacturing where metals such as steel, cast components and non-ferrous alloys must be drilled with repeatable quality. Compliance, Manufacturing and Best Practice Manufactured according to DIN 338 as a short, cylindrical-shank Spiral Drill, this product is produced as a ground (HSS-G) variant, which implies CNC-ground flutes for sharp edges and precise geometry. Ground drills generally offer cleaner holes and better accuracy than roll-formed types, though they can be somewhat more brittle and therefore are recommended for use with suitable coolant and in predominantly stationary mounting conditions. For optimal results, pair the bit with controlled speeds, adequate coolant and a solid clamping system. For precision metalworking, choose the MetavCUT Twist Drill Type N with TiN coating — for technical advice or to confirm suitability, METAV Werkzeuge provides expert consultation via email info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 46090-FDA Diameter: 9 mm Flute Length (Spirallänge): 81 mm Total Length (Gesamtlänge): 125 mm Point Angle (Spitzenwinkel): 135° Type: Type N Execution (Ausführung): short Shank Finish (Schaft-Ausführung): fully ground Coating (Farbe): TiN-coated Material: HSS-G Standard (Norm): DIN 338 Application: Drills for metal / Bohrer für Metall Intended Machine (Für Bohrmaschine): Drilling Machine / Handbohrmaschine Model Series (Modellserie): Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The MetavCUT Twist Drill Type N is primarily applied to machining high-strength materials and larger hole diameters; it performs well on alloyed and unalloyed steels and similar metals. Its form allows easier regrinding and it endures considerable loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The main categories are Metal drills (such as the MetavCUT Twist Drill), Wood drills and Masonry/Concrete drills. Each type is optimised in geometry and material for its intended substrate.

MetavCUT Twist Drill — Twist Drill, 9 mm, 135° tip, Long, Bright finished, HSS‑G, DIN 340 The MetavCUT Twist Drill is a long HSS‑G Twist Drill engineered for deep, precise metal drilling in demanding applications with a 9 mm diameter and a 135° tip. Long HSS‑G Twist Drill for deep holes 9 mm diameter for precise metal drilling 135° tip for hard materials like stainless steel Fully ground shank for high runout accuracy Conforms to DIN 340 for deep hole performance High cutting performance for tough metals Designed to handle challenging materials, this long HSS‑G Twist Drill excels in drilling legierte und unlegierte Stahl grades and cast irons. The larger 135° tip angle reduces entry forces for harder workpieces and improves centring, while the long flute length allows access to recessed holes. Users benefit from faster advance and reduced effort, since the ground geometry promotes a sharper cutting edge and cleaner chip removal. Precise geometry for accurate bores A fully ground shaft and CNC‑ground flutes ensure high runout accuracy and consistently round holes, which is critical when machining components that require tight tolerances. The ground manufacturing method yields very sharp edges and precise tolerance control; however, the harder geometry is best used with appropriate feed, cooling and, for portable setups, cautious handling to avoid brittle breakage. Practical advantages in workshop and production Because the long variant follows DIN 340, it is suited for deeper bores, bushings and situations with limited accessibility. The bright finished surface aids visual inspection and reduces initial friction during entry. For metalworking tasks in small series or repair work the tool reduces rework thanks to cleaner holes, making it an efficient choice where reliability and repeatability matter most. Who benefits and how to use it safely Engineers, toolroom technicians and maintenance professionals profit from the combination of HSS‑G hardness and long design when working on automotive, mechanical and maintenance applications. When using this Twist Drill in stationary machines, apply cutting fluid and moderate speed for best life expectancy. For handheld Drilling Machines, maintain firm guidance and lower advance rates to minimise breakage risk. We recommend the MetavCUT long HSS‑G Twist Drill for demanding deep metal bores — for personalised advice, drill parameter recommendations or further technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 53090-FDA Diameter: 9 mm Total length: 175 mm Spiral length: 115 mm Tip angle: 135° Material: HSS‑G Execution: Long Colour: Bright finished Shank execution: Fully ground Standard: DIN 340 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill is primarily intended for metalworking and is applied for drilling in high‑strength and cast materials where long, stable bores are required; it is especially suitable for deep holes and hard materials. Can the MetavCUT Twist Drill be re‑sharpened and reused? Yes, the MetavCUT Twist Drill made of HSS‑G can be re‑sharpened by grinding; attention should be paid to preserving the original tip angle and flute geometry to maintain performance. For what are Twist Drills used? The MetavCUT Twist Drill is mainly used when machining high‑strength materials and larger diameters; its form is relatively easy to re‑grind and it stands up to higher loads. Which 3 drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill type. Why are Twist Drills pointed? The point grind reduces the cross‑cut at the tip of the MetavCUT Twist Drill, lowering friction and required feed forces while improving centring accuracy in the workpiece. Can you drill wood with a Twist Drill? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑sharpen and have less self‑feed. At which drilling depths is the Twist Drill most used? Solid drilling for diameters up to around 20 mm and depths up to 100 mm is the most frequent use case; the MetavCUT Twist Drill is a common choice for such through‑holes and deep bores. What is better, HSS or HSSE? Choosing between HSS and HSSE depends on working conditions; the common assumption that HSSE is universally superior is incorrect — evaluate whether the application justifies the higher cost relative to the actual material and speed demands.

Spiralbohrer 9 mm, Spitzenwinkel 118°, rollgewalzt, HSS, Morsekegel, DIN 345, schwarz Der Spiralbohrer ist ein rollgewalzter HSS-Bohrer mit 9 mm Durchmesser und Morsekegelschaft, entwickelt für sichere Metallbohrungen an Ständerbohrmaschinen. 9 mm Durchmesser für präzise Metallbohrungen Rollgewalzte Fertigung für erhöhte Zähigkeit Morsekegel-Schaft für feste Kegelsitzaufnahme Geeignet für Stahl bis ca. 900 N/mm² Normgerecht nach DIN 345 Zähes Material und Fertigungsverfahren für robuste Bohrungen Der rollgewalzte Aufbau macht diesen Bohrer besonders zäh und bruchsicher im Alltagseinsatz. Aus HSS gefertigt, bietet der Werkstoff eine gute Kombination aus Verschleißfestigkeit und Elastizität, wodurch insbesondere bei Löchern unter 6 mm das Bruchrisiko reduziert wird. Die rollgewalzte Herstellungsweise sorgt für ein günstiges Preis-Leistungs-Verhältnis ohne unnötige Empfindlichkeit, was den Bohrer zur praktischen Wahl für Werkstätten und Instandhaltung macht. Präzision und Maschinenführung dank Morsekegel-Schaft Die Morsekegel-Aufnahme gewährleistet eine kraftschlüssige Drehmomentübertragung und einen sicheren Sitz in der Aufnahme von Ständerbohrmaschinen. Durch den festen Kegelsitz wird Vibration reduziert und die Laufruhe verbessert, was saubere Resultate bei mittleren Vorschubkräften ermöglicht. Der Spitzenwinkel von 118° erleichtert das Zentrieren und ist vor allem bei weicheren Metallen und universellen Anwendungen vorteilhaft. Anwendungsbereiche, Materialempfehlung und Einsatzlimits Konzipiert für allgemeine Metallbearbeitung, eignet sich der Bohrer für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Bei Werkstofffestigkeiten bis ca. 900 N/mm² ist eine wirtschaftliche Bearbeitung möglich. Für sehr tiefe Bohrungen, hochpräzise Passungen oder gehärtete Stähle sollten alternative Werkzeuge oder Vorbohrstrategien in Betracht gezogen werden. Die Spiral-Länge von 87 mm unterstützt effiziente Spanabfuhr bei normalen Bohrtiefen. Bedienungshinweise und Pflege für dauerhafte Leistung Beim Einsatz an Ständerbohrmaschinen auf korrekte Klemmsitzprüfung und Schmier-/Kühlmittelversorgung achten, um Standzeit zu verlängern. Für optimale Ergebnisse empfiehlt sich Vorbohren bei dicken Materialien und moderates Vorschubverhalten, um Überhitzung zu vermeiden. Nach Gebrauch Reinigungs- und Rostschutzmaßnahmen durchführen, um die Schneidengeometrie zu erhalten. Diese Praxis verlängert die Nutzungsdauer und bewahrt die Schneidfreudigkeit des Werkzeugs. Empfehlung: Der rollgewalzte HSS-Bohrer von MetavCUT in der Standard Line ist die pragmatische Wahl für Werkstätten, die robuste und wirtschaftliche Lösungen für Metallbohrungen suchen — bei Fragen zur Anwendungsoptimierung steht METAV Werkzeuge gern per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 zur Verfügung Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 54090-FDA Durchmesser: 9 mm Spitzenwinkel: 118° Material: HSS Ausführung: rollgewalzt Schaft Ausführung: Morsekegel Gesamtlänge: 168 mm Spirallänge: 87 mm Norm: DIN 345 Farbe: schwarz Modellserie: Standard Line Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie geeignet ist der Spiralbohrer von MetavCUT für Stahl? Der Spiralbohrer von MetavCUT ist ausgelegt für Stahl und Stahlguss bis etwa 900 N/mm² und ermöglicht wirtschaftliche Bohrungen in diesen Werkstoffen bei korrekter Werkzeugführung. Kann der Spiralbohrer von MetavCUT in einer Ständerbohrmaschine mit Morsekegel verwendet werden? Ja, der Spiralbohrer von MetavCUT besitzt einen Morsekegel-Schaft und ist speziell für die Aufnahme in passenden Ständerbohrmaschinen konzipiert, womit ein sicherer Kegelsitz und hohe Drehmomentübertragung erreicht werden. Welche Vorteile bietet die rollgewalzte Ausführung des Spiralbohrers von MetavCUT? Die rollgewalzte Fertigung des Spiralbohrers von MetavCUT sorgt für höhere Zähigkeit und verringertes Bruchrisiko bei Routineeinsätzen, was besonders bei normalen Werkstattaufgaben von Vorteil ist. Wie pflege ich den Spiralbohrer von MetavCUT, um die Lebensdauer zu erhöhen? Nach dem Einsatz den Spiralbohrer von MetavCUT reinigen, Späne entfernen und bei Bedarf mit Rostschutz behandeln; eine angemessene Kühlung während des Bohrens reduziert thermischen Verschleiß und verlängert die Standzeit. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#54090-FDA","sku":"54090-FDA","mpn":"54090-FDA","name":"Spiralbohrer 54090-FDA","description":"Spiralbohrer 9 mm, Spitzenwinkel 118°, rollgewalzt, HSS, Morsekegel-Schaft; Standard Line Bohrer nach DIN 345 für Metallanwendungen bis ca. 900 N/mm²; robuste, zähe Ausführung für Werkstatt und Instandhaltung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"9 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Ausführung","value":"rollgewalzt"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"Morsekegel"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"168 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"87 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 345"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Einsatzgrenze Werkstofffestigkeit","value":"bis ca. 900 N/mm²"}],"about":[{"@type":"Thing","name":"Rollgewalzter HSS Spiralbohrer"},{"@type":"Thing","name":"Morsekegel-Schaft für Ständerbohrmaschinen"},{"@type":"Thing","name":"DIN 345 Standard"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie geeignet ist der Spiralbohrer von MetavCUT für Stahl?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Spiralbohrer, Standard Line) ist ausgelegt für Stahl und Stahlguss bis etwa 900 N/mm² und ermöglicht wirtschaftliche Bohrungen bei korrekter Werkzeugführung."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Ständerbohrmaschine mit Morsekegel verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT verfügt über einen Morsekegel-Schaft und ist für die Aufnahme in passenden Ständerbohrmaschinen konzipiert; der feste Kegelsitz überträgt hohes Drehmoment und sorgt für Laufruhe."}},{"@type":"Question","name":"Welche Vorteile bietet die rollgewalzte Ausführung des Spiralbohrers von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die rollgewalzte Fertigung des Spiralbohrers von MetavCUT erhöht die Zähigkeit und verringert das Bruchrisiko im Alltagseinsatz; besonders praktisch für Standardaufgaben in Werkstatt und Instandhaltung."}},{"@type":"Question","name":"Wie pflege ich den Spiralbohrer von MetavCUT, um die Lebensdauer zu erhöhen?","acceptedAnswer":{"@type":"Answer","text":"Nach dem Einsatz den Spiralbohrer von MetavCUT reinigen, Späne entfernen und bei Bedarf mit Rostschutz behandeln; während des Bohrens angemessene Kühlung verwenden, um thermischen Verschleiß zu reduzieren."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-54090-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"mentions":[{"@type":"Thing","name":"Geeignet für legierten und unlegierten Stahl"},{"@type":"Thing","name":"Empfohlen für Ständerbohrmaschinen mit Morsekegel-Aufnahme"},{"@type":"Thing","name":"Rollgewalzte Bauart für Zähigkeit und Alltagstauglichkeit"}]}]}