Cheap Shipping Cost
fast shipment
Advice before purchase
Purchase comfortable on account
Hotline +49 2822 7131930
Go to homepage
Wishlist
Shopping cart €0.00
Eckmesserkopf auf weißem Hintergrund. Mit fünf Wendeplatten des Typs BOMT. Auf der Aufnahme des Werkzeugs befinden sich das Logo des Herstellers Teknik Makina und der Artikelcode.
HSS twist drill, DIN 338, Type N, short, roll forged, black finished 118°
HSS twist drill, DIN 338, Type N, short, roll forged, black finished 118°
HSS Twist Drill DIN 338, with reduced shank Type N, rollforged, black finished 118°
HSS Twist Drill DIN 338, with reduced shank Type N, rollforged, black finished 118°
HSS-G twist drill DIN 338 reduced shank, fully ground, with split point 135°
HSS-G twist drill DIN 338 reduced shank, fully ground, with split point 135°
HSS-G twist drill DIN 338 fully ground, bright, with hexagonal shank 118°
HSS-G twist drill DIN 338 fully ground, bright, with hexagonal shank 118°
HSS twist drill DIN 345 with taper shank, roll forged 118°
HSS twist drill DIN 345 with taper shank, roll forged 118°
HSS twist drill DIN 345 with taper shank, milled 118°
HSS twist drill DIN 345 with taper shank, milled 118°
HSS-G twist drill DIN 338 Type N, short, fully ground, bright finished, with split point 135°
HSS-G twist drill DIN 338 Type N, short, fully ground, bright finished, with split point 135°
HSS-G twist drill DIN 1897 Type N, with cylindrical shank, fully ground, bright, extra short, with split point, bright finished 135°
HSS-G twist drill DIN 1897 Type N, with cylindrical shank, fully ground, bright, extra short, with split point, bright finished 135°
HSS-G twist drill DIN 340 long series fully ground, bright finished, with split point 135°
HSS-G twist drill DIN 340 long series fully ground, bright finished, with split point 135°
HSS-G body drill double sided, fully ground, bright finished, with split point 135°
HSS-G body drill double sided, fully ground, bright finished, with split point 135°
HSS-G DIN 1869 long series fully ground, bright, with split point 135° SERIES 32
HSS-G DIN 1869 long series fully ground, bright, with split point 135° SERIES 32
HSS-G twist drill DIN 338 Type N, short, fully ground, with split point, TIN-coated 135°
HSS-G twist drill DIN 338 Type N, short, fully ground, with split point, TIN-coated 135°
HSS-E twist drill DIN 338 Type N, short, fully ground, with split point, 5% cobalt-alloyed 135°
HSS-E twist drill DIN 338 Type N, short, fully ground, with split point, 5% cobalt-alloyed 135°

Filter products

3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

Twist Drill — HSS‑G extra long, 3 mm, 135° tip, bright finished, DIN 1869, fully ground by MetavCUT The Twist Drill is an extra‑long HSS‑G bit designed for deep metal drilling and tough materials, offering a 135° tip geometry for improved centring and reduced walking in demanding tasks. Extra‑long design for deep hole drilling 3 mm diameter for precise small holes 135° tip for hard materials like stainless steel Fully ground HSS‑G for high precision Conforms to DIN 1869 for industrial applications Reach deeper holes with stable, reliable performance Built for applications where standard lengths fall short, the extra‑long geometry provides extended reach without frequent tool changes. This extension reduces setup time and increases productivity when machining deep bores. The primary advantage is uninterrupted drilling in assemblies or recessed features, where access is restricted. For best results in stationary or guided setups, cooling and steady feeds are recommended to preserve tool life. Precise cutting and centring for harder materials The 135° tip is optimised for harder materials and reduces tendency to wander at the start of a hole. A single clear benefit is faster penetration with improved centring on metals such as alloyed steel or cast iron. The sharpened geometry means lower axial force during entry, which helps maintain hole position and reduces the risk of workpiece damage when compared with more acute tip angles. Ground flutes (HSS‑G) for accuracy and clean holes A fully ground HSS‑G blank delivers superior roundness and surface finish thanks to CNC grinding of the flutes and cutting lips. This manufacturing method creates very sharp edges and tight tolerances, producing clean, burr‑reduced holes in metal. For operators unfamiliar with the term: "fully ground" means the flute geometry is created by precision grinding rather than rolling, yielding higher dimensional accuracy at the cost of slightly greater brittleness. Designed to meet industrial standards and common machine types Conforming to DIN 1869, this bit is specified for intensive use and deep drilling conditions. It is suitable for use in a Drilling Machine and for machining a range of metals, including unalloyed and alloyed steels up to the specified limits. The combination of a 3 mm diameter and a 180 mm overall length with a 120 mm spiral provides a practical solution where deep, narrow bores are required while maintaining guidance and hole quality. MetavCUT’s extra‑long HSS‑G Twist Drill is recommended for professional metalworking where depth and precision matter — for application advice or to confirm suitability for your project contact METAV Werkzeuge: info@metav-werkzeuge.com • Phone +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 33030-FDA Diameter: 3 mm Tip angle: 135° Execution: extra long Finish: bright finished Shaft execution: fully ground Spiral length: 120 mm Overall length: 180 mm Material: HSS‑G Standard: DIN 1869 For: Drilling Machine Model series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill and which materials does it suit? The MetavCUT Twist Drill is primarily designed for machining high‑strength materials and larger drill diameters; it excels in deep‑hole metalworking and maintains performance in alloyed and unalloyed steels, cast iron and non‑ferrous metals. Which three main drill types exist? The three common drill types are metal drills, wood drills, and masonry/concrete drills, each optimised for different materials and cutting conditions; the MetavCUT Twist Drill belongs to the metal drill category. Why are Twist Drills sharpened (re‑pointed)? Re‑pointing reduces the cross‑cut at the tip, which lowers friction and requires less feed force; this sharpening improves centring and cutting efficiency for the MetavCUT Twist Drill and prolongs effective performance. Can a metal Twist Drill be used for wood? A metal drill can be used in wood, but the MetavCUT Twist Drill will typically offer poorer guidance and a less clean finish than a dedicated wood bit; however, it is easier to resharpen and has reduced self‑feeding characteristics.

€3.08
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

MetavCUT Twist Drill — 3 mm, 135° point angle, extra long, bright finished, fully ground, HSS‑G, DIN 1869 the MetavCUT Twist Drill is a high‑precision drilling tool designed for deep metal drilling with hand drills and drilling machines, offering extra length and a 135° point for reliable centring and efficient penetration. Extra‑long design for deep holes Fully ground HSS‑G for precise, clean bores 135° point angle for harder materials Bright finished surface for corrosion resistance Optimised geometry for use in drilling machines Engineered for accurate metal drilling and durable results The HSS‑G material and DIN 1869 conformity ensure the bit is suited for demanding metalworking tasks. The fully ground flute geometry produces sharp cutting edges and a high runout accuracy, which results in cleaner bores and consistent hole dimensions. This construction is particularly advantageous when drilling alloyed and unalloyed steels, cast iron and non‑ferrous metals, because it minimises deformation at the hole edge and supports repeatable results in production or repair work. Extra length for hard‑to‑reach and deep holes With a total length of 240 mm and a spiral (working) length of 160 mm, the extra long execution enables access where standard bits cannot reach. This makes the tool ideal for deep‑hole operations and applications where the workpiece geometry or fixturing places the drill axis far from the operator. The bright finished surface helps reduce corrosion risk during storage and handling and supports smoother chip evacuation in deeper bores. Faster drilling with lower feed force — practical benefits The fully ground HSS geometry offers significant performance advantages: it can drill up to 40% faster and requires approx. 50% less feed force compared with conventional HSS bits of rolled geometry. The 135° point angle reduces initial bite in harder materials and shortens pilot time, improving control and reducing the risk of walking. For best results, use appropriate coolant and, when possible, a stationary setup to mitigate the inherently higher brittleness of ground drills. Recommended applications and user profile This tool is optimised for professional metalworkers, toolrooms and maintenance technicians who need precise, deep holes in steels, cast materials and hard plastics. The bit is suited for use in a Drilling Machine as well as robust hand‑held drills when carefully applied. If in doubt about suitability for a specific alloy or machining parameter, METAV Werkzeuge provides expert consultation to ensure the right selection for the task. Choose MetavCUT’s precision Twist Drill for demanding deep‑hole metalwork — for personalised technical advice and ordering assistance contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 34030-FDA Diameter: 3 mm Point angle: 135° Execution / Type: extra long Colour: bright finished Shaft execution / Shank finish: fully ground Spiral length: 160 mm Total length: 240 mm Material: HSS‑G Standard: DIN 1869 For use in: Drilling Machine (Hand drill compatibility) Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill mainly used for? The MetavCUT Twist Drill is primarily used for drilling high‑strength materials and larger diameters; it is especially effective for deep holes and tasks where a longer overall length is required, providing reliable performance in alloyed and unalloyed steels as well as cast materials. Which three drill types exist? The three main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is engineered specifically for metalworking applications.

€4.06
3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Spiralbohrer HSS-G Ø 3 mm, 135°, Typ N, extra kurz, blank, DIN 1897 Der Spiralbohrer für Metall bei engen Platzverhältnissen und stabilen Bohrungen mit Handbohrmaschine Extra kurze Bauform für mehr Stabilität HSS-G Material für hohe Verschleißfestigkeit Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft, universell passend Geeignet für Handbohrmaschine und Metall Höhere Stabilität und geringere Bruchneigung dank kurzer Bauform Die extra kurze Ausführung reduziert Vibration und verbessert die Rundlaufstabilität beim Bohren in dünnen Blechen und Profilen. Dadurch sinkt die Bruchneigung deutlich, was insbesondere bei beengten Bohrpositionen und bei Arbeiten mit Winkelbohrern von Vorteil ist. Anwender profitieren von präziseren Löchern und weniger Werkzeugausfällen. Schnellere Schnittgeschwindigkeit und geringerer Kraftaufwand Der geschliffene HSS-G Werkstoff sorgt für niedrigen Reibwert und eine harte Schneidekante. In Tests zeigte sich ein bis zu 40 % schnelleres Bohren bei gleichzeitig rund 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS-Bohrern. Diese Kombination ermöglicht schnellere Arbeitsabläufe und reduziert Ermüdung bei der Bedienung. Optimaler Winkel und Spiralform für Metallbearbeitung Der Spitzenwinkel 135° ist speziell für härtere Werkstoffe ausgelegt und erleichtert das Anbohren von legiertem Stahl und Gusswerkstoffen. Die Normalspirale des Typ N gewährleistet eine ausgewogene Spanabfuhr bei Metall und Stahl, eignet sich jedoch nicht für sehr weiche Materialien, bei denen andere Geometrien vorteilhaft sind. Schaftausführung und Anwendungsempfehlung für Werkstatt und Montage Der glatte Zylinderschaft passt in gängige Dreibackenfutter und macht den Bohrer universell einsetzbar in Handbohrmaschine und Winkelbohrmaschine. Durch den Durchmesser im Standard-Bereich ist das Werkzeug ideal für Werkstatt, Montage und DIY-Projekte in Stahl, Aluminium und Hartkunststoff. Für hochpräzise Passungen empfiehlt sich vorheriges Zentrieren. Fachliche Erklärung und Praxis-Tipps für sicheres Bohren Als Spiralbohrer der Norm DIN 1897 ist dieses Werkzeugsortiment auf robuste Metallbearbeitung ausgelegt. Geschliffene Schneiden reduzieren Wärmeentwicklung; deshalb empfiehlt sich moderates Kühlmittel bei dicken oder hitzeempfindlichen Werkstoffen. Bei hohem Drehmoment kurzzeitig prüfen, ob das Bohrfutter festen Halt bietet, um Durchrutschen am Zylinderschaft zu vermeiden. Empfehlung: Für stabile, schnelle Metallbohrungen die MetavCUT Ausführung mit HSS‑G und extra kurzer Bauform wählen; bei Fragen zur Anwendung berät METAV Werkzeuge gern per E‑Mail oder Telefon (info@metav-werkzeuge.com / +49 2822 7131930) Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 56030-FDA Durchmesser: 3 mm Gesamtlänge: 46 mm Spirallänge: 16 mm Spitzenwinkel: 135° Material: HSS-G Norm: DIN 1897 Ausführung: extra kurz Typ: Typ N Farbe: blank Schaftausführung: Zylinder Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall Geschliffene Ausführung: bis zu 40 % schnelleres Bohren; 50 % weniger Anpresskraft Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was macht den Spiralbohrer von MetavCUT besonders geeignet für Metall? Der Spiralbohrer von MetavCUT kombiniert HSS-G Material mit einer geschliffenen Schneide und dem Spitzenwinkel 135°, wodurch Anbohren und Spanbildung bei legierten Stählen und Gussmaterialien verbessert werden. Kann der Spiralbohrer mit Zylinderschaft in jeder Handbohrmaschine verwendet werden? Der Zylinderschaft des Spiralbohrers ist für gängige Dreibackenfutter ausgelegt und somit universell in Handbohrmaschine einsetzbar; bei sehr hohem Drehmoment sollte das Bohrfutter festen Halt gewährleisten, um Durchrutschen zu vermeiden. Eignet sich der Typ N Spiralbohrer für weiche Werkstoffe wie Aluminium? Der Typ N Spiralbohrer ist primär für Metall und Stahl optimiert; er funktioniert in Aluminium, aber weichere Werkstoffe profitieren gelegentlich von spezielleren Geometrien, die spanfreundlicher sind. Wie lange hält der HSS-G Spiralbohrer bei regelmäßiger Nutzung? Die Lebensdauer hängt von Material, Kühlung und Schnittbedingungen ab; der geschliffene HSS-G Spiralbohrer bietet gegenüber Standard-HSS eine höhere Verschleißfestigkeit und bleibt bei sachgemäßem Einsatz länger scharf. Wohin kann ich mich wenden, wenn ich eine Anwendungsspezifikation benötige? METAV Werkzeuge bietet kompetente Beratung; für technische Rückfragen zum Spiralbohrer erreichen Sie den Kundenservice per E‑Mail: info@metav-werkzeuge.com oder telefonisch: +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#56030-FDA","sku":"56030-FDA","mpn":"56030-FDA","name":"Spiralbohrer 56030-FDA","description":"Spiralbohrer HSS-G Ø 3 mm, 135°, Typ N, extra kurz, blank, Norm DIN 1897; extra kurze Bauform für mehr Stabilität; geschliffene Ausführung für bis zu 40 % schnelleres Bohren und 50 % weniger Anpresskraft; Zylinderschaft, geeignet für Handbohrmaschine und Winkelbohrmaschine; ideal für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"3 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"46 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"16 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1897"},{"@type":"PropertyValue","name":"Ausführung","value":"extra kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaftausführung","value":"Zylinder"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Geschliffene Ausführung","value":"bis zu 40 % schnelleres Bohren; 50 % weniger Anpresskraft"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Was macht den Spiralbohrer MetavCUT besonders geeignet für Metall?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT kombiniert HSS-G Material mit einer geschliffenen Schneide und dem Spitzenwinkel 135°, wodurch Anbohren und Spanbildung bei legierten Stählen und Gussmaterialien verbessert werden."}},{"@type":"Question","name":"Kann der Spiralbohrer mit Zylinderschaft in jeder Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Der Zylinderschaft des Spiralbohrers ist für gängige Dreibackenfutter ausgelegt und somit universell in Handbohrmaschine einsetzbar; bei sehr hohem Drehmoment sollte das Bohrfutter festen Halt gewährleisten, um Durchrutschen zu vermeiden."}},{"@type":"Question","name":"Eignet sich der Typ N Spiralbohrer für Aluminium und weichere Werkstoffe?","acceptedAnswer":{"@type":"Answer","text":"Der Typ N Spiralbohrer ist primär für Metall und Stahl optimiert; er funktioniert in Aluminium, aber weichere Werkstoffe profitieren gelegentlich von spezielleren Geometrien, die spanfreundlicher sind."}},{"@type":"Question","name":"Wie lange hält der HSS-G Spiralbohrer bei regelmäßiger Nutzung?","acceptedAnswer":{"@type":"Answer","text":"Die Lebensdauer hängt von Material, Kühlung und Schnittbedingungen ab; der geschliffene HSS-G Spiralbohrer bietet gegenüber Standard-HSS eine höhere Verschleißfestigkeit und bleibt bei sachgemäßem Einsatz länger scharf."}},{"@type":"Question","name":"Wohin kann ich mich wenden, wenn ich eine Anwendungsspezifikation benötige?","acceptedAnswer":{"@type":"Answer","text":"METAV Werkzeuge bietet kompetente Beratung; für technische Rückfragen zum Spiralbohrer erreichen Sie den Kundenservice per E‑Mail: info@metav-werkzeuge.com oder telefonisch: +49 2822 7131930."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/56030-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS-G"},{"@type":"Thing","name":"Extra kurze Bauform für Stabilität"},{"@type":"Thing","name":"Einsatz in Hand- und Winkelbohrmaschine"}],"mentions":[{"@type":"Thing","name":"Zylinderschaft"},{"@type":"Thing","name":"Spitzenwinkel 135°"},{"@type":"Thing","name":"Norm DIN 1897"}]}]}

€0.66
3mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
3mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT

Twist Drill — MetavCUT HSS‑G Fully Ground Twist Drill, 3 mm, 118°, Hex Shank, Silver, DIN 338 A Twist Drill designed as a Drill for Metal for use in Drilling Machines, delivering precise, fast metal drilling thanks to its fully ground HSS‑G geometry. Fully ground HSS‑G for precise metal drilling 118° point angle for improved centring Hexagonal shank for secure torque transfer DIN 338 classification for short twist drills 30 mm flute, 80 mm overall length for extended reach Precise metalworking with reduced effort This fully ground HSS‑G tool offers a clear productivity advantage when machining metals. The CNC‑ground flute geometry produces sharp cutting edges and a high runout accuracy, so holes are cleaner and dimensional accuracy is improved. Because the cutter is ground rather than rolled, drilling can be up to 40% faster and requires significantly less feed force, which reduces operator effort and lowers tool wear during stationary or machine drilling. Reliable centring and clean hole starts The 118° point angle is chosen for easier centring and controlled penetration in softer to medium materials such as aluminium and many steels. This geometry helps to avoid wandering on curved or uneven surfaces and produces a consistent entry without excessive burr formation. For users who value reproducible starts and neat hole edges, the tip design of this tool contributes directly to a superior finishing result. Secure fastening and fast changeovers A hexagonal shank provides form‑fit torque transmission, minimising slippage in bit holders and quick‑change chucks. This design is particularly advantageous for cordless and impact drivers equipped for metal drilling, as it reduces the need for re‑clamping and speeds up workflow. The combination of hex shank and short‑length design follows the DIN 338 concept for short twist drills, enabling simple handling in both portable and stationary setups. Application profile and best uses Engineered primarily as a Drill for Metal, this tool is suited to alloyed and unalloyed steels, cast materials, sintered iron and many non‑ferrous metals, as well as hard plastics. The fully ground construction makes re‑grinding straightforward, while cooling and reduced chip adhesion are recommended for prolonged performance. For heavy or continuous cutting tasks, use with appropriate cooling and machine mounting to minimise risk of breakage. Who benefits from this specification Workshops and maintenance teams that need fast, accurate holes in metal will find this tool effective. The MetavCUT design targets machinists, fabrication professionals and service technicians who require quick bit swaps, precise hole location and the ability to drill a range of metallic materials without frequent tool replacement. The robust geometry and DIN 338 conformity support industrial usage and repeatable results. Strong recommendation: Choose the MetavCUT fully ground HSS‑G Twist Drill for precise metal drilling — for technical questions or to confirm suitability for your application, contact METAV Werkzeuge for competent advice via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 57030‑FDA Diameter: 3 mm Point Angle: 118° Material: HSS‑G Execution: fully ground Flute Length: 30 mm Overall Length: 80 mm Shank Type: Hexagonal Colour: Silver For: Drilling Machine Norm: DIN 338 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill, a Drill for Metal, is primarily applied when machining high‑strength materials and larger drill diameters. Its ground geometry is easy to re‑grind and withstands higher loads, enabling faster drilling rates and cleaner holes, which makes it especially suitable for alloyed and unalloyed steels, cast materials and hard plastics. Which three drill types exist? When considering drill categories, the main types are Metal drill, Wood drill and Stone/Concrete drill, and the MetavCUT Twist Drill belongs to the metal drill family designed for precise metalworking applications.

€1.20
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT

Twist Drill — Type N short, 3 mm, 135° tip, TIN-coated, HSS‑G, DIN 338 A Twist Drill (Type N) from MetavCUT for precise metal drilling with a short design suited to drilling machines. Short design for improved stability TIN-coated for extended tool life 135° tip angle for hard metals Fully ground HSS‑G for precise holes Conforms to DIN 338 for short twist drills Precision and durability that improve metalworking results The MetavCUT Twist Drill combines a 3 mm diameter with a 135° tip angle and a short overall length to deliver high precision when machining hard materials. The HSS‑G material and fully ground flute geometry enable sharp cutting edges and consistent concentricity, which produce cleaner holes and reduce wobble. This design reduces required feed forces and supports stable drilling on both stationary and portable drilling machines, making it well suited for professional metalworking tasks. Short length for greater stability and accuracy A shorter working length reduces overhang and thus vibration, which directly improves hole quality in demanding operations. The short configuration of this Type N twist drill increases stiffness and lowers the risk of deflection when drilling alloys, cast iron or tempered steels. For operators, this means fewer rejected parts and less rework, especially when precise hole position and diameter tolerance are critical in assemblies and components. Coating and material explained — longer lifetime under load The TiN coating (TIN‑coated) provides a hard, low-friction surface that reduces wear and heat buildup during metal cutting. When combined with HSS‑G construction, the coating extends tool life and maintains sharpness, especially under intermittent cooling or light lubrication. For users unfamiliar with the term, HSS‑G refers to high‑speed steel that has been ground (G) to produce very sharp cutting edges and high concentric accuracy, which is particularly beneficial for drilling small diameters such as 3 mm. Application advice and practical use cases This short Type N twist drill is designed primarily for metal: alloyed and unalloyed steel, cast iron, sintered metals, copper, bronze and hard plastics. The 135° tip angle shortens the initial penetration time for harder materials and improves centring. Use with appropriate coolant or cutting fluid for best wear performance, and prefer steady clamping and minimal overhang to exploit the stability advantages of the short design. For handheld drilling machines, ensure the chuck grip is secure and use steady feed to avoid breakage. Who benefits most from this tool Engineers, machinists and maintenance technicians who require repeatable, precise holes in metal parts will find the short Twist Drill especially valuable. The combination of fully ground geometry and TiN coating supports applications where hole quality matters — toolrooms, small-batch fabrication and repair workshops. The tool is also suitable for use in production where short, accurate drill cycles reduce scrap and improve throughput. Strongly recommended: choose the MetavCUT Twist Drill Type N for demanding metal drilling tasks thanks to its short, stable design and TiN coating — for personal technical advice or further specifications contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 46030-FDA Diameter: 3 mm Overall length: 61 mm Spiral length: 33 mm Tip angle: 135° Type: Type N Material: HSS‑G Coating/Colour: TIN-coated Shank execution: fully ground Execution: short Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger bore diameters. The geometry of this short, fully ground HSS‑G drill allows relatively easy regrinding and withstands higher mechanical loads, making it suitable for demanding metalworking operations where durability and sharpness are required. Which three drill types are there? When selecting drills, the main categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill (Type N) falls into the Metal drills category and is optimised for steel, cast iron and other non‑ferrous metals.

€0.82
3mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
3mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT

Twist Drill — Long HSS‑G Twist Drill, 3 mm, 135° point, Bright Finished, Fully Ground, DIN 340 The Twist Drill long HSS‑G is a precision drill for metalworking, designed for deep holes and use with a Drilling Machine. Long design for deeper or hard-to-reach holes 3 mm Diameter for precise pilot holes 135° Point angle for harder materials Fully ground shank for high concentricity Conforms to DIN 340 for industrial applications High‑performance material for demanding metalwork The Twist Drill uses HSS‑G (high‑speed steel, ground) to combine cutting performance with durability when machining tough metals. This material allows up to 40% faster drilling compared with conventional HSS in many applications and typically requires less feed force, which reduces operator strain and wear on the machine. The 135° point angle is optimised for harder materials such as stainless steel, shortening initial plunge time and improving centring on difficult surfaces. Long execution for deep bores and restricted access The long execution follows DIN 340 dimensions, providing extra overall length and extended spiral length for deep holes or recessed drilling positions. The extended geometry is ideal when the bore is set back from the workpiece edge or when using jigs that limit accessibility. Because the flute geometry is fully ground, concentricity and hole quality are improved, producing clean, precise bores suitable for finishing or reaming. Optimised geometry and handling recommendations A fully ground flute geometry delivers sharp cutting edges and excellent roundness, which benefits accuracy in demanding metalworking tasks. Operators should note that ground HSS drills can be more brittle than rolled types and therefore are best used with steady machine support and adequate cooling for long runs. Re‑sharpening restores edge geometry; therefore the tool can be maintained economically in a workshop environment. Intended users and typical applications This Twist Drill is aimed at professional workshops, toolrooms and industrial users who require reliable performance when drilling in legied and unlegied steels, cast irons and non‑ferrous metals. It is suitable for use in a Drilling Machine and for stationary applications where high concentricity and hole quality are priorities. For occasional handheld use, ensure the drill is clamped securely and run at appropriate speeds with coolant. We recommend the MetavCUT Twist Drill for deep metal drilling — for expert guidance and to confirm suitability for your application contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical details Designation: Twist Drill Brand: MetavCUT SKU: 53030-FDA Diameter: 3 mm Point angle: 135° Execution: long Finish/Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 340 Spiral length: 66 mm Total length: 100 mm For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for and which materials suit it best? The Twist Drill from MetavCUT (Twist Drill) is primarily applied to machining high‑strength materials and larger bore diameters; it performs well in alloyed and unalloyed steel, cast iron varieties and non‑ferrous metals, offering robust cutting action for demanding metalwork. Is the MetavCUT Twist Drill suitable for deep holes and recessed bores? Yes, the Twist Drill by MetavCUT is a long execution conforming to DIN 340, designed for deeper bores and situations where the drill must reach further into the workpiece than a standard length would allow. What are Twist Drills mainly used for? Twist Drills are mainly used when machining high‑strength materials and larger diameters; their form is easy to grind and they withstand higher loads. Which three drill types exist? The three principal drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and therefore feed forces, while improving the drill’s ability to centre in the workpiece. Can metal Twist Drills be used for drilling wood? Metal drills can be used in wood but offer inferior guidance and a less clean finish; they are easier to re‑grind and have a reduced self‑feeding tendency compared with wood‑specific drills. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is often executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general view that HSSE steels are categorically superior to standard HSS is incorrect; assess working conditions carefully to decide whether the higher cost of HSSE is justified for your application.

€1.26
4.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
4.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill Type N — 4.1 mm, 118° Point Angle, Short HSS Drill by MetavCUT (Black, DIN 338) The Twist Drill Type N is a short High Speed Steel Metal Drill with a 4.1 mm Diameter and a 118° Point Angle, designed for precise work in Drilling Machines and handheld drilling applications. Short HSS design for improved stability Conforms to DIN 338 for short spiral drills 118° point for reliable centring on many metals Type N Normal Spiral for general metalworking Black finish with 75 mm overall length Exceptional Precision and Stability for Metalworking The short HSS construction of this Twist Drill provides higher stability and reduced tendency to bend compared with longer drills. With a 4.1 mm Diameter and a Spiral Length optimised to DIN 338, this geometry reduces run-out and vibration when used in a Drilling Machine or a Hand Drill, resulting in cleaner Holes and extended Tool Life. For professionals and hobbyists who demand repeatable accuracy, the compact form factor improves concentricity and simplifies alignment at the workpiece. Material Properties and What 118° Means for Your Work Made from HSS (High Speed Steel), this short Twist Drill resists heat and wear during standard metal drilling tasks. The 118° Point Angle offers a balanced penetration profile that eases centring on curved or mild surfaces and reduces walking on sheet materials, while still delivering efficient cutting in unalloyed and alloyed steels, cast iron, non-ferrous Metals and Plastics. The result is lower risk of Breakage on small diameters and reliable hole quality for through-drilling operations. Practical Applications and Who Benefits Most This Twist Drill Type N is intended primarily for drilling metal: workshops, maintenance departments and industrial users performing repair or fabrication tasks will appreciate the short design for confined setups. The tool suits both stationary and portable Drilling Machine use and is particularly effective when drilling diameters under typical hand-operated feed forces. Users seeking an uncomplicated, durable solution for everyday metalworking find this drill a practical choice. Why MetavCUT’s Short Twist Drill Stands Out Conforming to DIN 338, the short configuration of this Twist Drill emphasises precision and reduced deflection, which is crucial for repeatable results in production or repair work. The Type N Normal Spiral is a proven standard for general metal drilling and can be reground more easily than complex geometries. If you need tailored advice on whether the short HSS variant is the right solution for a specific material or machine, METAV Werkzeuge provides competent, detailed consultation to help you select the correct tool and operating parameters. Strongly recommend MetavCUT's short HSS Twist Drill Type N for precise metal drilling — for expert advice or technical questions contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 40041-FDA Diameter: 4.1 mm Point Angle: 118° Type: Type N Execution: Short Colour: Black Material: HSS Spiral Length: 43 mm Overall Length: 75 mm Application: Drills for metal For Drill Machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The Twist Drill (MetavCUT, Type N) is primarily applied to the machining of high-strength materials and larger drilling diameters in metalworking; its classic spiral form allows straightforward resharpening and reliable performance under higher loads. Which three drill types exist? Common drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill (Type N) belongs to the Metal Drill group and is optimised for steel and similar materials. Why are Twist Drills pointed (split-point or sharpened)? The tip geometry reduces the cross-cut at the drill point, which significantly lowers friction and the required feed force; the Twist Drill (MetavCUT, Type N) benefits from this by achieving better centring and easier penetration with reduced walking. Can the Twist Drill (MetavCUT, Type N) be used in wood? A Metal Drill such as the Twist Drill (MetavCUT, Type N) can be used in Wood, but guidance is inferior and the hole finish will be less clean compared with dedicated Wood Drills; however, these drills are easier to regrind and exhibit lower self-feeding tendencies. For which drilling depths is the Twist Drill mostly used? Solid through-holes are commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool, and the short variant offers higher stability for many workshop operations. What is better, HSS or HSSE? The assumption that HSSE is categorically superior to HSS is not always correct; when choosing between HSS and HSSE for the Twist Drill (MetavCUT, Type N), evaluate the working conditions carefully to determine whether the higher cost of HSSE is justified by the specific application.

€0.39
4.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
4.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT

Spiralbohrer – MetavCUT HSS‑E 4,1 mm, 135°, Typ N, kurz, geschliffen, 5% Kobalt, DIN 338 Der Spiralbohrer von MetavCUT ist ein kurz ausgeführter HSS‑E Metallbohrer für präzise Bohrungen in Stahl, Guss, Nichteisenmetall und Kunststof. MetavCUT Spiralbohrer 4,1 mm für Metallbohrungen Kurz‑Ausführung für erhöhte Stabilität beim Bohren HSS‑E mit 5% Kobalt für bessere Wärmebeständigkeit Geschliffener Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° ideal für harte Werkstoffe Präzision und Stabilität für anspruchsvolle Metallarbeiten Die Kurz‑Ausführung reduziert die Auskraglänge und sorgt so für deutlich geringere Neigung zum Verbiegen und für höhere Stabilität beim Bohren. Mit einem Durchmesser von 4,1 mm und einer Spirallänge von 43 mm ist der Bohrer für kurze, präzise Durchgangs‑ und Sacklochbohrungen ausgelegt. Die Kombination aus HSS‑E‑Werkstoff und 5% Kobalt bietet verbesserte Warmfestigkeit, sodass sich die Standzeit bei intermittierenden Serien für Werkstatt‑ und Montageeinsätze erhöht. Schneidleistung und Materialeigenschaften für saubere Bohrbilder Die geschliffene Schaftgeometrie sorgt für scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was saubere, maßhaltige Löcher ermöglicht. Der Spitzenwinkel 135° erleichtert das Anbohren harter Werkstoffe wie Edelstahl und reduziert das Auslaufen der Schneide. Durch den Einsatz von Kobalt‑legiertem Schnellarbeitsstahl bleibt die Schneidkante bei erhöhten Temperaturen belastbar; für höchste Lebensdauer empfiehlt sich eine Kühlschmierstoffzufuhr bei längeren Bohrfolgen. Einsatzgebiete und geeignete Maschinen Mit einem Durchmesser von 4,1 mm gehört der Bohrer in den Standard‑Bereich und ist besonders geeignet für Werkstatt‑ und Montagearbeiten, dünne bis mittlere Bleche sowie schnelle Bohrungen in Baustahl, Aluminium und Kunststof. Die Kurzform macht ihn kompatibel mit handgeführten Akkubohrschraubern und stationären Säulenbohrmaschinen; bei höherer Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um ein Wandern zu vermeiden. Praktische Hinweise für sicheres Arbeiten und maximale Lebensdauer Direktes Bohren mit diesem Durchmesser ist möglich; bei gehärteten oder besonders zähen Werkstoffen empfiehlt sich langsame Schnittgeschwindigkeit und kontinuierliche Kühlung. Für tiefe Löcher oder Serien in gehärtetem Stahl sollten stufenweises Aufbohren oder Vollhartmetallwerkzeuge geprüft werden. Die DIN 338‑Klassifizierung kennzeichnet die Norm‑gerechte Kurzform mit Zylinderschaft; bei Fragen zur Anwendung steht METAV Werkzeuge mit technischer Beratung zur Verfügung. Empfehlung: Mit dem MetavCUT Spiralbohrer in HSS‑E und 5% Kobalt präzise Metallbohrungen sicherstellen — bei Unsicherheit zur Auswahl oder zu Schnittparametern kontaktieren Sie METAV Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 47041-FDA Durchmesser: 4,1 mm Material: HSS‑E Legierung: 5% Kobaltlegiert Typ: Typ N Ausführung: kurz Schaft‑Ausführung: geschliffen Norm: DIN 338 Spitzenwinkel: 135° Gesamtlänge: 75 mm Spirallänge: 43 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Farbe: 5% kobaltlegiert Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der MetavCUT Spiralbohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer in HSS‑E mit 5% Kobalt und einem Spitzenwinkel von 135° eignet sich gut für das Bohren in Edelstahl; für beste Ergebnisse empfiehlt sich reduzierte Schnittgeschwindigkeit und Kühlschmierstoff. Kann der Spiralbohrer mit einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz in Handbohrmaschinen geeignet; die Kurz‑Ausführung verbessert die Stabilität bei handgeführten Arbeiten und reduziert Vibrationsneigung. Was bedeutet geschliffen und welche Vorteile bringt das beim Spiralbohrer? Bei der geschliffenen Ausführung des Spiralbohrers werden die Spannuten und Geometrie präzise geschliffen, was scharfe Kanten und hohe Rundlaufgenauigkeit ermöglicht; dies führt zu sauberen Bohrungen in Metall, erfordert aber bei stationären Anwendungen Kühlschmierung. Brauche ich für kleine Durchmesser besondere Drehzahlen? Für den 4,1 mm Spiralbohrer von MetavCUT gelten höhere Drehzahlen als für große Durchmesser; die genaue Geschwindigkeit hängt vom Werkstoff ab — bei Unsicherheit hilft METAV Werkzeuge gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 weiter. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#47041-FDA","sku":"47041-FDA","mpn":"47041-FDA","name":"Spiralbohrer 47041-FDA","description":"MetavCUT Spiralbohrer HSS-E 4,1 mm, 135°, Typ N, kurz, geschliffen, 5% Kobalt; kurz ausgeführter Metallbohrer nach DIN 338 für präzise Bohrungen in Baustahl, Edelstahl, Guss, Nichteisenmetallen und Kunststoffen; hohe Stabilität durch reduzierte Auskraglänge; geeignet für Handbohrmaschinen und stationäre Säulenbohrmaschinen; Spirallänge 43 mm, Gesamtlänge 75 mm.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"4,1 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-E"},{"@type":"PropertyValue","name":"Legierung","value":"5% Kobalt"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Spirallänge","value":"43 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"75 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Farbe","value":"5% kobaltlegiert"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der MetavCUT Spiralbohrer für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer HSS-E 4,1 mm Typ N mit 135° Spitzenwinkel eignet sich gut für das Bohren in Edelstahl; für beste Ergebnisse empfiehlt sich reduzierte Schnittgeschwindigkeit und Kühlschmierstoff."}},{"@type":"Question","name":"Kann der MetavCUT Spiralbohrer mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer 4,1 mm in Kurz‑Ausführung ist für den Einsatz in Handbohrmaschinen geeignet; die kürzere Auskraglänge erhöht die Stabilität bei handgeführten Arbeiten."}},{"@type":"Question","name":"Was bedeutet geschliffen beim Spiralbohrer und welche Vorteile bringt das?","acceptedAnswer":{"@type":"Answer","text":"Geschliffen bedeutet, dass Spannuten und Geometrie präzise geschliffen sind; der geschliffene MetavCUT Spiralbohrer liefert scharfe Schneidkanten und hohe Rundlaufgenauigkeit für saubere, maßhaltige Bohrungen in Metall."}},{"@type":"Question","name":"Welche Schnittgeschwindigkeit ist für den MetavCUT Spiralbohrer 4,1 mm empfehlenswert?","acceptedAnswer":{"@type":"Answer","text":"Für den MetavCUT Spiralbohrer 4,1 mm gelten höhere Drehzahlen als für große Durchmesser; die genaue Geschwindigkeit hängt vom Werkstoff ab — bei Unsicherheit hilft Metav Werkzeuge gern per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 weiter."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/47041-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz‑Ausführung"},{"@type":"Thing","name":"HSS‑E mit 5% Kobalt"},{"@type":"Thing","name":"DIN 338 Klassifizierung"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine geeignet"},{"@type":"Thing","name":"Einsatz in Baustahl und Edelstahl"},{"@type":"Thing","name":"Geschliffener Zylinderschaft"}]}]}

€2.19
4.1mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
4.1mm HSS-G Body Drill ,double sided, bright finished - MetavCUT

MetavCUT Body Drill – Twist Drill, Ø 4.1 mm, 135°, Double-sided, Bright finished, HSS‑G, Fully ground The MetavCUT Body Drill is a double‑ended Twist Drill designed for precision metalworking in Drilling Machines, offering a 135° tip angle and a fully ground shank for high concentric accuracy. HSS‑G construction for hard metals Double‑ended design for extended usability 135° tip angle for stainless steel and hard alloys Fully ground shank for precise concentricity Bright finished surface for smooth chip flow Outstanding cutting performance for demanding metals Designed for work with legated and unlegated steels, this Twist Drill delivers high cutting performance thanks to its HSS‑G alloy and a 135° tip angle. The geometry reduces radial forces when entering hard materials, so drilling starts cleaner and with less wandering. Users benefit from faster penetration in tough substrates and a reduced risk of workpiece damage. Practical workshops find the shorter, double‑ended format especially suited to sheet and bodywork tasks where repeatable, centred holes are required. Long life through precise grinding and surface finish A CNC grind of the flutes creates very sharp cutting edges and excellent runout properties, while the bright finished surface supports consistent chip evacuation. This ground manufacturing approach yields cleaner holes and longer usable life under appropriate cooling. The fully ground shank improves centring in chucks and reduces vibration, which in turn enhances tool life and hole quality when used in a stable Drilling Machine setup. Applications, guidance and safe handling in the workshop Engineered for metalworking, the Twist Drill is particularly effective on cast materials, Tempered Steels, Non‑Ferrous Metals and Hard Plastics. For best results, select appropriate cutting speeds and use coolant for higher alloy steels. When turning a blunt side, the double‑ended design allows immediate reuse by flipping the tool, providing operational efficiency in production or maintenance environments. Always secure the workpiece and observe safety practices when working with high‑speed Metal Drilling. Who benefits most and why experts choose this design Maintenance technicians, panel beaters and precision shops benefit from the combination of double‑ended utility and HSS‑G sharpness. The reduced axial force and improved centring capability make the drill a practical choice for repeatable holemaking in bodywork and thin‑plate metal applications. MetavCUT’s Standard Line aims to balance robust performance with straightforward handling for both station‑based and mobile Drilling Machine work. Strong recommendation: Choose the MetavCUT Body Drill for precision metal drilling — contact METAV Werkzeuge for tailored advice and technical support via email, phone or WhatsApp Are you unsure whether this Twist Drill meets your requirements or need additional data? METAV Werkzeuge offers competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58041-FDA Diameter: 4.1 mm Tip Angle: 135° Spiral Length: 13 mm Overall Length: 55 mm Material: HSS‑G Execution: Double-sided Shaft Execution: Fully ground Colour: Bright finished Intended Use: Drills for metal / Drilling Machine Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Body Drill Twist Drill? The MetavCUT Body Drill Twist Drill is primarily used for machining high‑strength metals and larger drilling diameters; its double‑ended design and HSS‑G composition make it suitable for demanding bodywork and thin‑plate applications where robust, repeatable holes are required. Can the MetavCUT Body Drill be used in handheld drills? The MetavCUT Body Drill Twist Drill is intended for use with Drilling Machines but can be used in suitable Hand Drills when proper clamping and reduced cutting speeds are observed; for best performance and safety, a stable Drilling Machine with coolant is recommended. What are Twist Drills primarily used for? Twist Drills are mainly applied in the machining of high‑strength materials and larger drill diameters; their design enables straightforward resharpening and they withstand higher loads, making them ideal for metalworking and bodywork tasks. Which three drill types exist? There are three common families of drill: Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the secondary cutting edge at the tip of the Twist Drill, which lowers friction forces and therefore decreases required feed force while improving centre‑holding accuracy in the workpiece. Can a metal drill be used to drill wood? A Metal Drill can be used in wood, but guidance and hole finish are generally inferior compared to purpose‑made Wood Drills. Metal Drills are easier to resharpen and tend to have less aggressive self‑feed characteristics. For which drilling depths is the Twist Drill most commonly used? A through‑hole is typically made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.

€1.07
4.1mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
4.1mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Spiralbohrer Ø 4,1 mm, 135°, Typ N, extra kurz, blank, HSS‑G, DIN 1897 (MetavCUT) Der Spiralbohrer von MetavCUT ist ein extra kurzer HSS‑G Bohrer für präzise Metallbohrungen mit Handbohrmaschine und engen Einbauräumen. Ø 4,1 mm für präzise Metallbohrungen Extra kurze Ausführung für enge Räume HSS‑G Material für hohe Standzeit Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft passend für Dreibackenfutter Mehr Stabilität bei beengten Einbausituationen Die extra kurz Ausführung reduziert Hebelwirkung und Vibration, wodurch die Bruchneigung deutlich sinkt. Damit wird die Stabilität bei Bohrungen in dünnen Blechen und Profilen sichtbar erhöht. Anwender profitieren von sicherer Führung in engen Werkstückbereichen, wobei die kürzere Gesamtlänge zugleich den Einsatz in Winkel- und Handbohrmaschinen erleichtert. Hohe Bohrleistung durch Material und Geometrie Der Einsatz von HSS‑G in Kombination mit dem 135° Spitzenwinkel sorgt für hohe Wärmebeständigkeit und eine gute Spanbildung bei legierten und unlegierten Stählen. Ein geschliffener Span sorgt für effizienteren Spanabtransport; dadurch kann die Bohrgeschwindigkeit gegenüber konventionellen HSS‑Bohrern spürbar steigen und die Anpresskraft reduziert werden, was den Arbeitsaufwand verringert. Kompatibilität und gezielte Einsatzgebiete Der Bohrer ist mit Zylinderschaft ausgeführt und lässt sich universell in Dreibackenfutter spannen. Die Spirallänge 22 mm und die Gesamtlänge 55 mm machen ihn geeignet für typische Hand- und Winkelbohrmaschinen. Aufgrund des Durchmessers fällt das Produkt in den Standard‑Bereich, ideal für Werkstattarbeiten an Blechen, Profilen, Guss und Nichteisenmetallen. Praxistipps für saubere Bohrungen und lange Standzeit Bei hoher Präzision sollte vorgepunktet werden, um Wandern beim Anbohren zu vermeiden. Kühlmittel oder Schneidöle verlängern die Standzeit, und moderate Drehzahlen mit gleichmäßigem Vorschub verhindern Überhitzung. Tiefe Bohrungen sind zu vermeiden; für größere Durchmesser empfiehlt sich mehrstufiges Aufbohren nach einschlägigen Praxisempfehlungen. Empfehlung: Vertrauen Sie auf die MetavCUT Standard Line für stabile, präzise Metallbohrungen und nutzen Sie die fachkundige Beratung von METAV Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 — auch per WhatsApp unter +49 170 2837271 Technische Daten auf einen Blick Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 56041-FDA Durchmesser: 4,1 mm Spitzenwinkel: 135° Typ: Typ N Material: HSS‑G Norm: DIN 1897 Ausführung: extra kurz Farbe: blank Schaftausführung: Zylinderschaft Spirallänge: 22 mm Gesamtlänge: 55 mm Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Typ N, HSS‑G) eignet sich für härtere Werkstoffe dank des 135° Spitzenwinkels; bei Edelstahl empfiehlt sich angepasste Drehzahl und Kühlung, um die Standzeit zu maximieren. Kann der Spiralbohrer mit einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer MetavCUT in extra kurzer Ausführung ist für den Einsatz mit Handbohrmaschine vorgesehen und bietet durch die kürzere Bauform bessere Stabilität in Handanwendungen. Was bedeutet die Norm DIN 1897 für diesen Spiralbohrer? DIN 1897 beschreibt die Abmessungsnormen und Toleranzen; der Spiralbohrer MetavCUT nach DIN 1897 garantiert kompatible Maße und Austauschbarkeit bei üblichen Werkzeugaufnahmen. Wie vermeide ich Bruch bei einem 4,1 mm Bohrer? Der Spiralbohrer von MetavCUT sollte mit zentrierter Anbohrung bei hoher Präzision und mit moderater Drehzahl verwendet werden; Kühlung und gleichmäßiger Vorschub reduzieren Bruchrisiko und erhöhen die Standzeit. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#56041-FDA","sku":"56041-FDA","mpn":"56041-FDA","name":"Spiralbohrer 56041-FDA","description":"Spiralbohrer Ø 4,1 mm, 135°, Typ N, extra kurz, blank, HSS-G nach DIN 1897; extra kurze Ausführung für bessere Stabilität in engen Einbauräumen; geeignet für Handbohrmaschine; Zylinderschaft; Spirallänge 22 mm, Gesamtlänge 55 mm.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"4,1 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"extra kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1897"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaftausführung","value":"Zylinder"},{"@type":"PropertyValue","name":"Spirallänge","value":"22 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"55 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Preis netto","value":"0.82 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Spiralbohrer, Typ N, HSS-G) eignet sich für härtere Werkstoffe dank des 135° Spitzenwinkels; bei Edelstahl empfiehlt sich angepasste Drehzahl und Kühlung, um die Standzeit zu maximieren."}},{"@type":"Question","name":"Kann der Spiralbohrer mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT (Spiralbohrer, Typ N, HSS-G) in extra kurzer Ausführung ist für den Einsatz mit Handbohrmaschine vorgesehen und bietet durch die kürzere Bauform bessere Stabilität in Handanwendungen."}},{"@type":"Question","name":"Was bedeutet die Norm DIN 1897 für diesen Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"DIN 1897 beschreibt die Abmessungsnormen und Toleranzen; der Spiralbohrer MetavCUT (Spiralbohrer, Typ N, HSS-G) nach DIN 1897 garantiert kompatible Maße und Austauschbarkeit bei üblichen Werkzeugaufnahmen."}},{"@type":"Question","name":"Wie vermeide ich Bruch bei einem 4,1 mm Bohrer?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Spiralbohrer, Typ N, HSS-G) sollte mit zentrierter Anbohrung bei hoher Präzision und mit moderater Drehzahl verwendet werden; Kühlung und gleichmäßiger Vorschub reduzieren Bruchrisiko und erhöhen die Standzeit."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/56041-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"Extra kurze Ausführung für enge Einbauräume"},{"@type":"Thing","name":"HSS-G Material für hohe Standzeit"}],"mentions":[{"@type":"Thing","name":"Zylinderschaft passend für Dreibackenfutter"},{"@type":"Thing","name":"Spirallänge 22 mm"},{"@type":"Thing","name":"Gesamtlänge 55 mm"}]}]}

€0.82
4.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
4.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT

Twist Drill (Type N) — Short HSS‑G, 4.1 mm, 135°, Bright Finished, DIN 338 by MetavCUT A Twist Drill (Type N) in short execution for precise metal drilling with a 4.1 mm diameter and a 135° point angle, suited for use in Drilling Machines and Hand Drills. Short execution for increased stability and precision Fully ground shank for high concentricity 135° point angle optimised for hard materials Conforms to DIN 338 for short HSS twist drills Outstanding drilling performance and faster cycle times The short Twist Drill in HSS‑G combines a reduced overhang with a ground flute geometry to deliver high stability and precision when machining metal. Shorter projection reduces the tendency to deflect, which translates into cleaner holes and longer tool life under comparable conditions. The ground design provides very sharp cutting edges and excellent runout accuracy, enabling up to 40% faster drilling speeds and requiring up to 50% less feed force compared with conventional HSS versions when used with suitable machining parameters. Robust geometry for demanding materials With a 135° point angle and the classical Type N spiral, this drill is optimised for harder materials such as stainless and alloyed steels. The larger point angle shortens the initial entry phase, improving centring and reducing chatter on tough surfaces. The fully ground shank and CNC‑ground flutes ensure consistently accurate centring and repeatable hole quality, making it ideal for precision metalworking tasks in production and repair environments. Practical design for workshop and machine use Designed to the DIN 338 standard for short twist drills with cylindrical shank, this tool is intended primarily for stationary or mobile machine applications where high concentricity is required. The short length and bright finished surface facilitate handling and inspection, while the overall length of 75 mm and spiral length of 43 mm suit common drilling depths without unnecessary flex. The Type N geometry focuses on metalworking, not soft woods or masonry. Who benefits from this Twist Drill Engineers, maintenance technicians and metalworkers who demand precise, repeatable holes in alloys and steels will value the combination of HSS‑G material and short design. The drill is particularly useful where tool rigidity matters—small bores in hardened or cast materials and jobs on bench drills or portable drilling machines where minimising deflection improves final part quality. For tasks requiring high surface finish and tight tolerances, this drill provides reliable performance. For applications requiring expert advice on suitability, tolerances or recommended machining parameters, Metav Werkzeuge offers comprehensive technical support — contact via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 We recommend the MetavCUT Twist Drill Type N for precision metalworking where stability and repeatable hole quality are essential — for tailored technical guidance contact METAV Werkzeuge. Twist Drill (Bezeichnung): Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45041-FDA Type: Type N Diameter: 4.1 mm Point angle: 135° Execution: Short (kurz) Colour / Finish: Bright Finished (blank) Shank design: Fully Ground (geschliffen) Spiral length: 43 mm Overall length: 75 mm Material: HSS‑G Standard / Norm: DIN 338 Application: Drills for metal (Bohrer für Metall) Model series: Standard Line Intended machine: Drilling Machine / Hand Drill (Handbohrmaschine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger hole diameters; its ground geometry makes it easy to regrind and it withstands higher loads, which suits it for demanding metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is designed specifically for steels and similar materials. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, lowering friction and the required feed forces while improving centring of the drill in the workpiece for the MetavCUT Twist Drill (Type N). Can a metal Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and surface quality are inferior compared with dedicated wood drills; however, metal drills are easier to regrind and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill; for diameters up to about 20 mm and depths up to 100 mm the Twist Drill is the most frequently used tool, including the MetavCUT short HSS‑G versions. Is HSS or HSSE better for my application? The notion that HSSE is always superior to HSS is not universally true; evaluate working conditions and material specifics before choosing, and consult Metav Werkzeuge for tailored advice on whether the MetavCUT HSS‑G Twist Drill is appropriate.

€1.04
4.1mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
4.1mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT

Twist Drill — HSS-G Twist Drill (Diameter 4.1 mm, 135° Point, Long, Bright Finished) The Twist Drill is a long HSS-G drill bit designed for deep metal drilling and tight access areas, suitable for use with hand and drilling machines and compliant with DIN 340. Long HSS-G design for deep holes 4.1 mm Diameter for precise pilot holes 135° point angle for hard materials Fully ground shank for high runout accuracy DIN 340 long series with bright finish Power and Precision for Demanding Metalwork The Twist Drill from MetavCUT combines the wear resistance of HSS-G with a 135° point geometry to tackle harder alloys with improved centring. The ground flute geometry delivers sharp cutting edges and consistent chip evacuation, which reduces cutting forces and increases hole quality. For operations in alloyed and unalloyed steel, cast materials and hard plastics, this design ensures a reliable, repeatable machining result and reduces the need for rework. Reach Deeper: Long Version for Difficult Access Engineered as a long execution according to DIN 340, this drill offers extended overall length and working spiral length to access recessed or hard-to-reach bore sites. The longer geometry makes it ideal for drilling deeper holes without switching tools. The bright finished surface helps to reduce friction and improves visibility of the cutting zone, while the fully ground shaft provides superior runout accuracy for straight, precise holes even when used in hand-held drilling setups. Best Materials and Typical Applications This Twist Drill is particularly suited to drilling operations in legierte und unlegierte Stähle (alloyed and unalloyed steel), Gussstahl, Gusseisen, Sintereisen, Nichteisenmetalle and hard engineering plastics. The combination of HSS-G material and the 135° tip reduces chipping and improves entry in tougher substrates. When used as intended, users benefit from cleaner hole walls and maintained dimensional accuracy, which simplifies subsequent assembly or finishing steps. Handling Tips for Reliable Results To preserve tool life and maintain performance, use moderate feed with adequate coolant when machining harder materials; the ground geometry can be more brittle than rolled alternatives and benefits from controlled cutting conditions. For best centring and lower heat build-up, start with a suitable pilot where possible and ensure the drill is clamped with minimal runout. The fully ground shaft enhances chuck performance and reduces vibration, supporting consistent hole quality in both production and workshop environments. Choose the MetavCUT Twist Drill for precise, deep metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 53041-FDA Diameter: 4.1 mm Point angle: 135° Execution: long Overall length: 119 mm Spiral length: 78 mm Colour: bright finished Shaft execution: fully ground Material: HSS-G Norm: DIN 340 Model series: Standard Line Application: Drills for metal For drilling machine: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill primarily used for? The MetavCUT Twist Drill is mainly applied for machining high-strength materials and larger bore diameters; its long version suits deeper holes and less accessible locations while the ground geometry allows faster drilling with lower applied feed force. Can the MetavCUT Twist Drill be used with a hand drilling machine? Yes, the MetavCUT Twist Drill is suitable for use with a Handbohrmaschine (drilling machine); its fully ground shaft improves chuck grip and runout accuracy, making it appropriate for both stationary and careful hand-held applications when correct speeds and cooling are observed. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high-strength materials and larger drill diameters; this form is easy to resharpen and withstands higher loads. Which three drill types are there? Metal drill, Wood drill, Stone/Concrete drill. Why are Twist Drills pointed? The pointing reduces the cross edge at the tip of the Twist Drill, which significantly lowers friction forces and requires reduced feed force; pointing also improves centring of the drill tip in the workpiece. Can you drill wood with a Twist Drill? A metal drill can also be used in wood, but guidance and surface quality are inferior; however, such drills are easier to resharpen and usually have less self-feed tendency. At what drilling depths is the Twist Drill most commonly used? Solid drilling with a Twist Drill is common; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to standard HSS is not correct; evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your application.

€1.68
4.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
4.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

MetavCUT Twist Drill — Type N, 4.25 mm, HSS, Short, 118° (Black, DIN 338) The MetavCUT Twist Drill Type N is a short HSS metal drill designed for precise holemaking in hand drills and drilling machines. Short HSS design for high stability 118° point angle for reliable centring 4.25 mm precision diameter DIN 338 compliant for short twist drills Suitable for hand drills and drilling machines Greater accuracy through a short, stable design The short Twist Drill construction reduces overhang and therefore vibration, which significantly improves hole accuracy when working with metal. Made from HSS (High Speed Steel), this short Type N cutter offers elasticity that lowers the risk of breakage when drilling small holes under 6 mm. For users who require clean, repeatable results in maintenance work or light production, the compact geometry means less runout and faster setup. Optimised tip and geometry for metalworking efficiency A 118° point angle balances centring ability and cutting action for many common metals; it makes the drill easier to start and is suitable for materials like mild steel and aluminium. The Type N spiral is the classic metal-drilling geometry, engineered for chip evacuation and durable performance. Choosing the correct point angle reduces the need for rework and shortens cycle time when multiple holes are required. Material compatibility and practical guidance This short HSS tool is intended primarily for metal applications including alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics — in other words, typical uses grouped under "Drills for metal". Because the Type N geometry is not optimised for very soft woods, users seeking cleaner guidance for timber should prefer dedicated wood drills. For longevity, moderate cutting speeds and proper lubrication when machining harder alloys are recommended. Who benefits and where to use it Maintenance technicians, machinists and metalworking hobbyists who operate hand drills or compact drilling machines will gain most from this compact twist drill. Its 4.25 mm diameter and short overall length provide a stable tool for confined setups and jig work. If uncertainty remains about suitability for a specific material or machine, METAV Werkzeuge offers comprehensive, expert advice to match tools to tasks. Choose the MetavCUT Twist Drill Type N for precise metal drilling and contact METAV Werkzeuge for tailored technical support — 📧 info@metav-werkzeuge.com • ☎️ +49 2822 7131930 • ✔️ WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 400425-FDA Diameter: 4.25 mm Spiral length: 43 mm Total length: 75 mm Point angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black Standard: DIN 338 Application: Drills for metal For use with: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high-strength materials and larger drill diameters; its shape allows relatively easy resharpening and it withstands higher loads, making it suitable for drilling steel, cast iron and non-ferrous metals. Which three drill types exist? There are three main drill categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N is an example of a metal drill optimised for machining metallic materials.

€0.39
4.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
4.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT

Twist Drill — Type N short HSS‑G drill, Ø 4.25 mm, 135° tip, bright finished The Twist Drill Type N is a short, fully ground HSS‑G drill engineered for precise metalworking tasks in drilling machines and hand drills. Short design for higher stability and precision HSS‑G ground geometry for clean metal holes 135° tip for harder materials like stainless steel Fully ground shank for accurate runout Conforms to DIN 338 for short twist drills Precision and strength for demanding metalworking The Twist Drill from MetavCUT combines a HSS‑G ground geometry with a 135° point to deliver reliable performance when drilling harder metals. Because the flutes and cutting geometry are produced by CNC grinding, the result is sharp cutting lips and a high runout accuracy, which leads to cleaner holes and reduced burr formation. This short version reduces overhang and therefore vibration, so the user benefits from improved centring and longer tool life when paired with adequate cooling. Stable holes through reduced overhang and robust shank A shorter overall length means less deflection and better feed control, particularly when working on alloyed and unalloyed steel, cast steel, and non‑ferrous metals. The fully ground shank ensures accurate clamping and minimal eccentricity in the chuck, which supports consistent hole quality. Use in stationary or portable drilling machines profits from the increased stiffness, making the drill a good choice for workshop setups where precision matters. Who gains most from this compact design Metalworkers, maintenance technicians and toolroom operators will appreciate the combination of a short flute length and Type N normal spiral for typical metal drilling tasks. The drill was designed to excel where stable, repeatable holes are required rather than for deep through‑holes. For users needing quick, accurate spot drilling and finishing holes in tougher materials, this design reduces rework and improves process reliability. Practical guidance and material recommendations To maximise performance, operate the drill with appropriate cutting fluid and moderate speeds for the workpiece material. The 135° point reduces chipping on entry and shortens the start time on hard metals; however, for very soft materials consider a different point geometry. The designation DIN 338 indicates this is a short cylindrical‑shank twist drill series; ground types like this (often marked HSS‑G) are easier to re‑sharpen but can be more brittle than rolled variants, so avoid excessive side loads and use cooling where possible. Highly recommended for precision metalwork: choose the MetavCUT Twist Drill Type N with HSS‑G ground geometry and consult METAV Werkzeuge for tailored technical advice — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 450425-FDA Diameter: 4.25 mm Total Length: 75 mm Spiral Length: 43 mm Point Angle: 135° Type: Type N Execution: short Colour: bright finished For Drilling Machine: Drilling Machine Shank Execution: fully ground Model Series: Standard Line Material: HSS-G Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N by MetavCUT used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters in metalworking. Its short design and ground geometry make it suitable for precise metal drilling tasks where stable, clean holes are required. Which three drill types exist? Common drill categories are metal drills, wood drills and masonry/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill group designed for ferrous and non‑ferrous metals. Why are twist drills pointed? The point on a twist drill reduces the size of the chisel edge at the tip, lowering friction and therefore the required feed force; this improves centring and reduces the tendency for the drill to wander in the workpiece. Can a metal twist drill be used for wood? A metal‑type drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with dedicated wood drills; however, metal drills are easier to re‑sharpen and have lower self‑feed tendencies.

€1.04
4.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
4.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill (Type N) — 4.2 mm · 118° point · short · black · DIN 338 · HSS · MetavCUT The Twist Drill Type N is a short HSS metal-drilling bit designed for precise work with hand and drilling machines. High-Speed Steel for durable metal drilling Short design for improved stability and precision 118° point angle for easier centring on workpieces Conforms to DIN 338 for consistent manufacturing quality Black finish reduces glare and improves visibility Precision and durability for demanding metalwork Built for metal applications, this short HSS bit provides a reliable combination of hardness and elasticity. The material choice—High Speed Steel—ensures sustained cutting performance on alloyed and unalloyed steels, cast iron and non-ferrous metals while reducing the risk of brittle fracture on small diameters. For operators who require repeatable hole quality, the use of a Type N geometry yields steady chip formation and prolonged tool life. Better control and straighter holes thanks to the short design Because the overall length is reduced, vibration and deflection are minimised, resulting in straighter bores and improved surface finish. The compact geometry of this short variant increases rigidity when clamped in the chuck, which is especially advantageous for precise bench and hand drilling tasks. Users notice fewer wander effects at the start of the hole and a lower tendency for the tool to chatter under moderate feeds. Faster centring and adaptable cutting with the 118° point A 118° point angle offers balanced entry performance and is well suited to softer to medium-hard metals and general-purpose shop work. This tip geometry helps to centre the bit quickly without excessive force, making initial alignment easier on curved or slightly irregular surfaces. For operators unfamiliar with drill geometry, the shorter point reduces the chance of slipping while starting the hole and supports consistent results. Designed for workshop use and straightforward application Engineered to DIN 338 standards, this bit fits the typical requirements of industrial and craft environments: consistent dimensions, reliable tolerances and easy handling. The black surface finish improves visibility against bright metal shavings and can offer modest protection against corrosion. Suited to standard drilling machines and hand operation, the tool is a practical choice for mechanics, maintenance teams and metal fabricators seeking a robust general-purpose twist drill. Strong recommendation: Choose the MetavCUT Twist Drill Type N for precise metal drilling — METAV Werkzeuge provides expert technical advice and support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 40042-FDA Diameter: 4.2 mm Spiral length: 43 mm Total length: 75 mm Point angle: 118° Execution: short Type: Type N Colour: black Material: HSS Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine / Hand drilling machine Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; the HSS composition makes this drill suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, delivering reliable performance in standard shop conditions. How does the short version of the Twist Drill improve results? A short Twist Drill reduces overhang and therefore deflection, which improves hole accuracy and surface finish. The shorter length increases rigidity in the chuck and lowers the tendency to chatter during manual or machine drilling. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high-strength materials and large drill diameters. Its form allows straightforward sharpening and it withstands higher loads during drilling. Which three drill types exist? The three common drill types are metal drill, wood drill and stone/concrete drill. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of the Twist Drill. By regrinding the tip, friction forces are significantly lowered which reduces the required feed force; at the same time the drill tip centres better in the workpiece. Can a metal drill be used for wood drilling? A metal drill can be used in wood, but guidance and hole cleanliness are typically worse than with a dedicated wood bit. Metal drills are easier to resharpen and have less self-feeding action. At which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is usually made with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to conventional HSS is not universally true. When choosing, consider whether the working conditions justify the higher purchase price of HSSE.

€0.39
4.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
4.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT

Spiralbohrer kurz, Durchmesser 4,2 mm, Spitzenwinkel 135°, Typ N, 5% kobaltlegiert, geschliffen, DIN 338, HSS‑E Der Spiralbohrer Typ N ist ein kurzer HSS‑E Metallbohrer für präzise Bohrungen in legierten und unlegierten Stählen sowie in Gusseisen und Nichteisenmetallen. Kurze Ausführung für hohe Stabilität 5% Kobaltlegierung erhöht Wärmebeständigkeit HSS‑E: zäh und verschleißfest Geschliffen für saubere, präzise Bohrbilder Spitzenwinkel 135° für harte Werkstoffe Stabilität und Präzision für anspruchsvolle Metallarbeiten Die kurze Bauform reduziert die Auskraglänge und verringert damit das Risiko von Durchbiegung und Vibrationen. Für Anwender bedeutet das eine spürbar höhere Stabilität beim Bohren mit Handbohrmaschine oder stationärer Maschine, was insbesondere bei kleinen Durchmessern die Bruchgefahr senkt. Das verwendete HSS‑E mit 5% Kobalt kombiniert Zähigkeit und Temperaturbeständigkeit, wodurch sich das Bohrwerkzeug länger formstabil in anspruchsvollen Werkstoffen wie legiertem Stahl einsetzen lässt. Geometrie und Schneidwirkung für saubere Ergebnisse Die geschliffene Schaftausführung sorgt für eine sehr präzise Schneidgeometrie und einen gleichmäßigen Rundlauf. Der Spitzenwinkel 135° ist auf härtere Werkstoffe ausgelegt und verkürzt die Anbohrphase, während die Spirallänge von 43 mm die Spanabfuhr bei normalen Bohrtiefen unterstützt. Als Typ N mit Normalspirale bietet das Werkzeug eine ausgewogene Kombination aus Vorschubverhalten und Spantransport, was saubere Bohrbilder und reproduzierbare Lochmaße begünstigt. Einsatzbereiche, Maschinen und Anwenderkreis Mit einem Durchmesser von 4,2 mm fällt der Bohrer in den Standard‑Bereich, ideal für Werkstatt, Montage und vielseitige DIY‑Projekte. Empfohlen ist der Einsatz in Handgeführten Bohrmaschinen und stationären Säulenbohrern; bei hoher Genauigkeit empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Das Werkzeug richtet sich an Nutzer, die zuverlässige Metallbearbeitung wünschen, etwa Instandhaltung, Metallbau und Maschinenbau‑Werkstätten. Arbeitsempfehlungen für lange Standzeiten Für eine optimale Standzeit sollten Schnittgeschwindigkeit und Kühlschmierstoff an den Werkstoff angepasst werden. Bei verschleißintensiven Anwendungen kann die Verwendung von Kühlung oder Schneidölen die Wärmeentwicklung reduzieren und die Lebensdauer des Bohrers erhöhen. Bei Bohrungen in sehr harten oder zähen Materialien empfiehlt sich ein kontrollierter Vorschub sowie regelmäßige Überprüfung auf Gratbildung, um die Präzision der Folgebohrungen sicherzustellen. Setzen Sie auf die MetavCUT Standard Line: Mit dem kurz ausgeführten Spiralbohrer erhalten Sie ein robustes HSS‑E Werkzeug mit 5% Kobalt für dauerhaft präzise Metallbohrungen — bei Fragen berät METAV Werkzeuge gern persönlich per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 47042-FDA Durchmesser: 4,2 mm Material: HSS‑E Legierung: 5% Kobaltlegiert Ausführung: kurz Schaftausführung: geschliffen Typ: Typ N (Normalspirale) Norm: DIN 338 Spitzenwinkel: 135° Gesamtlänge: 75 mm Spirallänge: 43 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑E Ausführung mit 5% Kobalt ist für viele Edelstähle geeignet; bei erhöhtem Härtegrad empfiehlt sich Kühlung und ein angepasster Vorschub, um Überhitzung und Verschleiß zu vermeiden. Kann ich den Spiralbohrer Typ N in einer Handbohrmaschine verwenden? Ja, der Spiralbohrer Typ N wurde für den Einsatz in Handgeführten Bohrmaschinen und stationären Bohrern konzipiert; die kurze Ausführung verbessert dabei die Stabilität und verringert das Verbiegen. Worin liegt der Vorteil eines geschliffenen Spiralbohrers gegenüber gewalzten Ausführungen? Ein geschliffener Spiralbohrer von MetavCUT bietet höhere Rundlaufgenauigkeit und schärfere Kanten, was zu saubereren Bohrlöchern führt; bei empfindlichen Anwendungen ist die präzisere Geometrie oft vorteilhaft. Wie erreiche ich die beste Standzeit mit dem Spiralbohrer HSS‑E? Für lange Standzeiten sollte der Spiralbohrer kühlend betrieben werden, die Schnittgeschwindigkeit an das Material angepasst und bei wiederholten Bohrungen auf Gratbildung geachtet werden; so bleibt die Präzision länger erhalten. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#47042-FDA","sku":"47042-FDA","mpn":"47042-FDA","name":"Spiralbohrer 47042-FDA","description":"Kurzer Spiralbohrer Typ N, Durchmesser 4,2 mm, Spitzenwinkel 135°, HSS‑E mit 5% Kobaltlegierung, geschliffener Zylinderschaft nach DIN 338; geeignet für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; hohe Stabilität durch kurze Ausführung; Spirallänge 43 mm, Gesamtlänge 75 mm.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"47042-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"4,2 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS‑E"},{"@type":"PropertyValue","name":"Legierung","value":"5% Kobaltlegiert"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"75 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"43 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]} ,{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT Spiralbohrer Typ N in HSS‑E Ausführung mit 5% Kobaltlegierung eignet sich für viele Edelstähle; bei erhöhtem Härtegrad empfiehlt sich Kühlung und angepasster Vorschub, um Überhitzung und verschleiß zu vermeiden."}},{"@type":"Question","name":"Kann ich den Spiralbohrer Typ N in einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer Typ N wurde für den Einsatz in Handgeführten Bohrmaschinen und stationären Bohrern konzipiert; die kurze Ausführung erhöht die Stabilität und verringert das Verbiegen."}},{"@type":"Question","name":"Worin liegt der Vorteil eines geschliffenen Spiralbohrers gegenüber gewalzten Ausführungen?","acceptedAnswer":{"@type":"Answer","text":"Ein geschliffener MetavCUT Spiralbohrer bietet höhere Rundlaufgenauigkeit und schärfere Kanten, was zu sauberen Bohrlöchern führt; diese Geometrie ist besonders vorteilhaft bei harten Werkstoffen und präzisen Anwendungen."}},{"@type":"Question","name":"Wie erreiche ich die beste Standzeit mit dem Spiralbohrer HSS‑E?","acceptedAnswer":{"@type":"Answer","text":"Für lange Standzeiten sollte der MetavCUT Spiralbohrer kühlend betrieben werden; Schnittgeschwindigkeit an das Material anpassen und bei wiederholten Bohrungen auf Gratbildung achten, um die Präzision zu erhalten."}}]} ,{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-47042-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Typ N"},{"@type":"Thing","name":"HSS‑E mit 5% Kobalt"},{"@type":"Thing","name":"Kurze Ausführung nach DIN 338"}],"mentions":[{"@type":"Thing","name":"Geschliffener Zylinderschaft"},{"@type":"Thing","name":"Spitzenwinkel 135°"},{"@type":"Thing","name":"Spirallänge 43 mm"}]}]}

€2.19
4.2mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
4.2mm HSS-G Body Drill ,double sided, bright finished - MetavCUT

Body Drill — Twist Drill, 4.2 mm, 135° tip, double sided, bright finished, HSS‑G The Body Drill is a double‑sided twist drill for metalworking, designed for use with drilling machines and optimised for sheet metal and rivet holes. Double‑ended design for reversible use Fully ground HSS‑G for high precision Optimised 135° tip for hard metals Bright finished surface for easy chip evacuation Short, stable geometry for sheet metal work High‑performance Material for Faster, Cleaner Drilling The HSS‑G construction combined with a fully ground shaft yields exceptionally sharp cutting edges and high concentricity. This manufacturing method—CNC grinding rather than rolling—produces a Twist Drill with very precise geometry, which leads to cleaner holes and reduced runout. In practice, the ground HSS geometry can deliver up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS variants, making it particularly effective when working with alloyed and unalloyed steels, cast materials and hard plastics. Precision Tip Geometry Minimises Entry Time and Workpiece Damage An optimised 135° tip shortens the initial contact time and improves centring on harder materials such as stainless steel and cast iron. The larger tip angle spreads cutting forces and reduces tendency to chip or pull, so the Twist Drill penetrates smoothly under proper coolant and clamping conditions. For users this means fewer re‑drills, better surface quality and lower risk of workpiece distortion when producing precise, repeatable holes. Double‑ended Design: Practical and Economical in Sheet Metal Work The double‑sided (double‑ended) configuration functions like two drills in one: when one cutting end becomes dull it can be reversed and the opposite end used immediately. This compact, short geometry is ideal for Body‑ and sheet‑metal applications, especially where rivet or thin‑plate holes are common. The bright finished surface aids chip flow and inspection, while the short length improves stability in handheld or bench drilling operations. For best results use with appropriate speeds and cooling to mitigate brittleness under heavy loads. Who Benefits and How to Use It for Long Service Life Metalworkers, body shop technicians and maintenance teams benefit from the stable cutting action and easy reversibility of this twist drill. For optimal life and hole quality, clamp the workpiece securely, use adequate cooling, and avoid excessive feed on thin sheets. The MetavCUT Body Drill performs well in drilling machines and stationary setups; due to its ground geometry it is also straightforward to re‑sharp in a controlled workshop environment if required. Choose the MetavCUT Body Drill for reliable, high‑precision sheet metal and general metal drilling — for technical advice or help selecting the right drill for your application contact METAV Werkzeuge; we provide expert consultation by e‑mail, phone and WhatsApp: info@metav-werkzeuge.com · +49 2822 7131930 · +49 170 2837271 Technical Specifications Designation: Body Drill Brand: MetavCUT SKU: 58042-FDA Diameter: 4.2 mm Overall length: 55 mm Spiral length: 13 mm Tip angle: 135° Material: HSS‑G Execution: double sided Shank execution: fully ground Colour / Finish: bright finished For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Body Drill (MetavCUT) cut reliably? The MetavCUT Body Drill, a robust twist drill, is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics; its HSS‑G geometry is optimised for those harder materials and provides clean holes when used with correct speeds and coolant. What is a Twist Drill used for? A Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; its form is easy to resharpen and it tolerates higher loads, which makes it suitable for demanding metalwork and large‑diameter holes. Which three drill types exist? The three common drill categories are metal drills, wood drills and stone/concrete drills.

€1.07
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

Twist Drill — Extra Long HSS‑G Drill (Ø 4.2 mm, 135°) The Twist Drill is an extra long HSS‑G drill designed for deep metal drilling, offering a 135° point angle and a fully ground shank for precise work with drilling machines. Extra long geometry for deep, hard-to-reach holes 4.2 mm diameter for precise hole placement 135° point angle for stainless and hard steels HSS-G material, CNC-ground for precise holes Fully ground shank for excellent runout accuracy Faster deep drilling with less feed force Thanks to its extra long geometry and HSS‑G composition, this drill is optimised for deep holes in demanding materials. The ground spiral profile and DIN 1869 specification make it particularly suitable for alloyed and unalloyed steels, cast iron and non‑ferrous metals. The manufacturing method produces a bit that can drill up to 40 % faster and requires around 50 % less feed force compared with conventional HSS drills, which reduces operator fatigue and machine load and shortens cycle times. Precise holes and clean edges for reduced rework The CNC grinding process of the flutes yields very sharp cutting edges and high radial accuracy, so the tool produces precision bores with minimal burr and superior surface quality. Such precision lowers the need for secondary finishing and reduces scrap rates. Be aware that ground HSS bits can be less ductile than rolled types, so optimal results are obtained with appropriate speeds, steady clamping and cooling in more stationary or semi‑stationary setups. Built for workshop and industrial demands Engineered for use in a Drilling Machine, this extra long bit supports applications where standard lengths fall short, for example deep‑bore assemblies or hard‑to‑reach mounting positions. The 135° tip ensures efficient entry into harder materials, shortening punch‑through times and improving centring. For machinists and maintenance teams tackling thick workpieces, this design translates into fewer tool changes and more predictable cycle times. Practical handling, maintenance and cost advantages A fully ground shank contributes to low runout and stable clamping in chucks, while the bright finish aids visual inspection and corrosion resistance. The HSS‑G material can be resharpened, extending service life and making the tool economical for regular workshop use. Regular use of coolant and correct cutting parameters will maximise lifetime and maintain hole quality, offering a balance of durability and regrindability for professional applications. Strong recommendation: Choose the MetavCUT extra long Twist Drill for reliable deep‑hole metalworking — for technical advice or to confirm suitability for specific jobs, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 32042-FDA Diameter: 4.2 mm Overall length: 175 mm Spiral length: 120 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: extra long Shaft finish: fully ground Surface finish: bright finished Intended for: Drilling Machine Application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT used? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; it is intended for deep holes and heavy‑duty applications. Its ground HSS geometry makes it suitable for alloyed and unalloyed steels, cast and sintered irons, non‑ferrous metals and hard plastics, and the design allows efficient cutting, good centring and high wear resistance under demanding conditions. Which three drill types exist? There are three common basic types of drills: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks.

€4.58
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

Spiralbohrer 4,2 mm Ø, 135° Spitzenwinkel, extra lang, HSS-G (DIN 1869) – MetavCUT Der Spiralbohrer von MetavCUT ist ein extra langer, geschliffener HSS-G-Bohrer für präzise Metallbohrungen mit 4,2 mm Durchmesser und Tieflochspirale. Extra lange Bauform für tiefe Bohrungen Geschliffener HSS-G-Schaft für hohe Präzision 135° Spitze für harte Werkstoffe DIN 1869 Tieflochspirale für saubere Spanabfuhr Geeignet für Handbohrmaschine und stationäre Geräte Schnelleres Arbeiten bei hoher Materialvielfalt durch reduzierten Vorschubaufwand Dank der HSS-G-Legierung und der speziellen geschliffenen Geometrie lässt sich das Bohrtempo deutlich erhöhen, ohne dass die Anpresskraft proportional steigen muss. Messungen zeigen, dass geschliffene Spiralbohrer gegenüber herkömmlichen HSS-Ausführungen bis zu 40 % schneller bohren und dabei etwa 50 % weniger Anpresskraft benötigen. Dieser Effekt bedeutet für Werkstatt und Montage kürzere Bearbeitungszeiten und geringere Ermüdung des Bedieners bei Serien- oder Einzelarbeiten. Präzise Bohrlöcher und verbesserte Spanabfuhr durch geschliffene Geometrie Die geschliffene Fertigung sorgt für hohe Rundlaufgenauigkeit und sehr scharfe Schneidkanten, was sich in sauberen Bohrlöchern mit engeren Toleranzen zeigt. Im Unterschied zu gewalzten Bohrern werden die Spannuten beim geschliffenen Spiralbohrer durch CNC-Schliff herausgearbeitet; das Ergebnis sind definierte Spanräume und weniger Rattermarken im Werkstück. Für Anwender ohne tiefe Zerspanungskenntnisse ist das ein klarer Qualitätsvorteil bei Metallbearbeitung. Entwickelt für tiefe, schwer zugängliche Bohrungen und anspruchsvolle Einsätze Die Extra lange Ausführung mit einer Spirallänge von 150 mm und einer Gesamtlänge von 220 mm erfüllt Anforderungen an tiefe Bohrungen, wie sie in Reparatur, Maschinenbau und bei Sonderkonstruktionen vorkommen. Die nach DIN 1869 gestaltete Tieflochspirale unterstützt die Spanabfuhr auch unter erschwerten Bedingungen, wodurch die Einsatzmöglichkeiten über Standardanwendungen hinaus erweitert werden. Materialseitig eignet sich der Bohrer für legierten und unlegierten Stahl, Guss sowie Hartkunststoffe bis zur angegebenen Werkstoffhärte. Praxisnahe Hinweise zur Anwendung und zur Lebensdauersteigerung Vor dem Einsatz empfiehlt sich bei hoher Genauigkeitsforderung das Anpunkten mit einem Zentrierbohrer; für alltägliche Anwendungen kann im Bereich bis 13 mm Durchmesser direkt gebohrt werden. Zur Verlängerung der Standzeit sind moderate Schnittgeschwindigkeit, geeignete Kühlung und bei stationärem Einsatz ein ruhiger Rundlauf zu beachten. Der Spiralbohrer ist so konzipiert, dass er sowohl in Handbohrmaschinen als auch in stationären Bohreinheiten eingesetzt werden kann, wobei bei kleinen Durchmessern auf Verkantungsfreiheit geachtet werden sollte. Vertrauen Sie auf den extra langen MetavCUT HSS-G Spiralbohrer für präzise, effiziente Metallbohrungen; bei Fragen berät METAV Werkzeuge gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 33042-FDA Durchmesser: 4,2 mm Spitzenwinkel: 135° Ausführung: extra lang Farbe: blank Material: HSS-G Schaft Ausführung: geschliffen Norm: DIN 1869 Gesamtlänge: 220 mm Spirallänge: 150 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der MetavCUT Spiralbohrer 4,2 mm für Edelstahl geeignet? Der MetavCUT Spiralbohrer in HSS-G-Ausführung mit 135° Spitzenwinkel ist für härtere Werkstoffe, darunter legierte Stähle und Edelstahl, vorgesehen; bei Edelstahl empfiehlt sich angepasste Schnittgeschwindigkeit und Kühlschmierstoff, um Wärmebildung zu reduzieren. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT mit 4,2 mm Durchmesser fällt in den Standard-Bereich und kann sowohl in Handbohrmaschinen als auch in stationären Bohreinheiten eingesetzt werden; für höchste Präzision wird vorheriges Anpunkten empfohlen. Worin unterscheidet sich der geschliffene MetavCUT Spiralbohrer von gewalzten Bohrern? Beim geschliffenen MetavCUT Spiralbohrer werden Spannuten und Schneiden CNC-geschliffen, was zu schärferen Kanten, besserer Rundlaufgenauigkeit und saubereren Bohrlöchern führt; als Folge ist der Bohrer jedoch empfindlicher gegenüber Verkantung und sollte mit geeigneter Kühlung betrieben werden. Wie tief kann mit dem extra langen MetavCUT Spiralbohrer gebohrt werden? Die extra lange Bauform mit 150 mm Spirallänge und 220 mm Gesamtlänge wurde für tiefe Bohrungen konzipiert; konkrete Tiefen hängen von Werkstoff, Kühlung und Maschinensteifigkeit ab, daher empfiehlt METAV Werkzeuge bei Spezialanforderungen eine Beratung vorab. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#33042-FDA","sku":"33042-FDA","mpn":"33042-FDA","name":"Spiralbohrer 4,2 mm Ø, 135° Spitzenwinkel, extra lang, HSS-G","description":"Extra langer, geschliffener HSS-G Spiralbohrer mit 4,2 mm Durchmesser, 135° Spitzenwinkel und DIN 1869 Tieflochspirale für präzise Metallbohrungen; geeignet für legierten und unlegierten Stahl, Guss und Hartkunststoffe; geschliffener Schaft für hohe Rundlaufgenauigkeit.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"4,2 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"220 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"150 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der MetavCUT Spiralbohrer 4,2 mm für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 4,2 mm Ø in HSS-G-Ausführung mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe wie Edelstahl; bei Edelstahl empfiehlt sich angepasste Schnittgeschwindigkeit und Kühlschmierstoff zur Wärmeabfuhr."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer 4,2 mm Ø kann sowohl in Handbohrmaschinen als auch in stationären Bohreinheiten eingesetzt werden; für höchste Präzision wird vorheriges Anpunkten mit einem Zentrierbohrer empfohlen."}},{"@type":"Question","name":"Worin unterscheidet sich der geschliffene MetavCUT Spiralbohrer von gewalzten Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene MetavCUT Spiralbohrer 4,2 mm Ø hat CNC-geschliffene Spannuten und Schneiden, was zu schärferen Kanten, höherer Rundlaufgenauigkeit und saubereren Bohrlöchern führt; im Gegenzug ist er empfindlicher gegen Verkantung und sollte mit geeigneter Kühlung betrieben werden."}},{"@type":"Question","name":"Wie tief kann mit dem extra langen MetavCUT Spiralbohrer gebohrt werden?","acceptedAnswer":{"@type":"Answer","text":"Die extra lange Ausführung des MetavCUT Spiralbohrers 4,2 mm Ø bietet eine Spirallänge von 150 mm und eine Gesamtlänge von 220 mm, sodass tiefe Bohrungen realisierbar sind; die tatsächlich erreichbare Tiefe hängt von Werkstoff, Kühlung und Maschinensteifigkeit ab."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"HSS-G Spiralbohrer"},{"@type":"Thing","name":"Tieflochspirale nach DIN 1869"},{"@type":"Thing","name":"Extra lange Ausführung für tiefe Bohrungen"}],"mentions":[{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"135° Spitzenwinkel für harte Werkstoffe"},{"@type":"Thing","name":"Anwendung: Bohrer für Metall"}]}]}

€5.82
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

Twist Drill — Drill for Drilling Machine, Ø 4.2 mm, 135°, HSS‑G, Extra‑Long, Bright Finished, DIN 1869 (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill for deep metal holes, designed for use in Drilling Machines and industrial applications. Extra‑long design for deep hole drilling HSS‑G material for high cutting performance 135° point angle for hard materials Fully ground shank for high concentricity Complies with DIN 1869 for deep‑hole applications Precision and power for deep metal drilling The Twist Drill from MetavCUT is engineered as an extra‑long HSS‑G bit to reach depths that standard drills cannot. The 135° point angle reduces walking on hard materials and shortens the initial penetration time, which is especially valuable when drilling thicker plates or components made from stainless or alloyed steels. Compliance with DIN 1869 guarantees a geometry and spiral design optimised for demanding, deep‑hole applications, providing consistent results in production and workshop use. Faster machining with a ground geometry A fully ground (HSS‑G) spiral geometry yields very sharp cutting edges and excellent run‑out precision. The CNC grinding process produces a stable flute profile and clean bore surfaces; as a result, the MetavCUT bit can deliver up to 40% faster drilling and requires significantly less axial pressure compared with conventional rolled HSS drills. This translates into reduced operator fatigue and improved cycle times when used with appropriate coolant and steady fixturing. Materials and suitable applications This drill is specified for metalworking: it is suitable for legierte und unlegierte Stähle, Gray Cast Iron, Brass, Non‑Ferrous Metals and Hard Plastics within the recommended hardness limits. The extra‑long overall and working lengths make it ideal where through‑holes or deep blind holes are required and where access is limited. Use it in Drilling Machines and machine tool set‑ups that provide stable clamping and coolant flow to extend life and maintain hole quality. Handling recommendations and support For best results, secure the workpiece and use steady feed rates tailored to the material. Because ground HSS bits can be more brittle than rolled variants, avoid shock loads and always apply suitable cooling for long drilling operations. If uncertain about feeds, speeds or the correct bit for a specific alloy or thickness, METAV Werkzeuge offers comprehensive technical support and advice. Their experienced team will help choose the right tooling and operating parameters for the application. For reliable deep‑hole machining choose the MetavCUT extra‑long HSS‑G Twist Drill and request tailored machining advice from METAV Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Extra‑long) Brand: MetavCUT Diameter: 4.2 mm Point angle: 135° Execution: Extra‑long Overall length: 280 mm Spiral length: 190 mm Material: HSS‑G Shank execution: Fully ground Colour: Bright finished Model series: Standard Line Application: Drills for metal Suitable for: Drilling Machine Standard: DIN 1869 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is used primarily for drilling in metal; it is designed for deep holes and for machining high‑strength and hard materials where an extra‑long working length is required. The geometry and HSS‑G material suit alloyed and unalloyed steels, cast irons and other non‑ferrous metals. Which three drill types exist? Common drill types are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for machining metallic materials. Why are Twist Drills point‑ground? Point grinding reduces the cross‑cut at the tip, lowering friction and required feed force. For the MetavCUT Twist Drill a ground tip improves centring and reduces radial run‑out, which results in cleaner holes and more consistent drilling under load. Can a metal Twist Drill be used in wood? A metal Twist Drill like the MetavCUT bit can be used in wood, but guidance and finish are inferior to purpose‑made wood drills. Metal drills are easier to re‑grind and have less aggressive self‑feed, so hole quality and tracking may be reduced in timber.

€7.31
4.2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
4.2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Twist Drill — Type N, 4.2 mm, 135°, Extra short, Bright finished, HSS-G, DIN 1897 by MetavCUT The Twist Drill Type N is an extra-short HSS-G metal drill designed for hand and drilling-machine use, offering increased stability and faster drilling in confined spaces. Extra-short design for higher stability HSS-G material for robust metal drilling 135° point angle for harder workpieces Cylindrical shank fits standard chucks Conforms to DIN 1897 extra-short specification Increased Precision and Faster Drilling for Metalwork The extra-short geometry of this Twist Drill improves rigidity and reduces the risk of breakage when working with thin materials or in restricted spaces. Made from HSS-G, the bit combines wear resistance with toughness, enabling up to 40% faster drilling and requiring about 50% less feed force compared with conventional HSS drills. This leads to more consistent hole quality in alloyed and unalloyed steel, cast steels and non-ferrous metals while reducing operator effort. Better Penetration in Harder Materials With a 135° point angle, this Type N Twist Drill is optimised for harder workpieces such as stainless steel and tempered materials. The flatter point reduces chipping and shortens initial contact time, so the drill centres more reliably and requires less rework. For workshops that frequently face demanding substrates, this geometry translates directly into fewer tool changes and steadier machining results. Practical Design for Hand and Angle Drills The cylindrical shank ensures universal compatibility with standard three-jaw chucks, making the bit simple to mount in typical hand or angle drilling machines. The extra-short overall length enhances torque transmission and reduces flex during manual operation, which is particularly useful when access is limited or when drilling from awkward angles. The bright finished surface eases chip evacuation and inspection. Targeted Applications and User Benefits Designed as a classic metalworking solution, the Twist Drill Type N from MetavCUT is intended for professionals and advanced hobbyists who require reliable performance on steel, cast iron, sintered materials and hard plastics. Its robustness and ease of resharpening make it a cost-effective choice for production tasks where consistent centring and longevity are priorities. Strong recommendation: For precise metal drilling tasks choose the MetavCUT Twist Drill Type N for its extra-short stability and HSS-G performance — for further technical advice or to confirm suitability for your application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 56042-FDA Durchmesser: 4.2 mm Spitzenwinkel: 135° Typ: Type N Ausführung: extra short Farbe / Finish: Bright finished Material: HSS-G Schaftausführung: Cylindrical Gesamtlänge: 55 mm Spirallänge: 22 mm Anwendung: Drills for metal Norm: DIN 1897 Modellserie: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily designed for metalworking; it performs well in alloyed and unalloyed steel, cast steel, sintered iron, non-ferrous metals and hard plastics, delivering reliable centring and efficient material removal. Is the MetavCUT Twist Drill Type N compatible with standard hand drills? Yes, the cylindrical shank of the MetavCUT Twist Drill Type N fits standard three-jaw chucks on most hand and angle drilling machines, enabling straightforward mounting and universal compatibility. For what is a Twist Drill used? The MetavCUT Twist Drill is mainly used for machining high-strength workpieces and larger bore diameters; its form is easy to sharpen and it withstands higher loads. Which 3 drill types exist? Common drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? The sharpening reduces the chisel edge at the tip of the Twist Drill; by sharpening, friction forces are significantly lowered, requiring less feed force and improving centring in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood but will generally guide less well and produce a less clean hole; however, it is easier to resharpen and shows lower self-feed tendency. At what drill depths is the Twist Drill most commonly used? A through-hole is typically executed with a Twist Drill; for diameters up to 20 mm and drill depths up to 100 mm the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to standard HSS is not correct; when choosing between HSS and HSSE, evaluate whether working conditions justify the higher initial cost of HSSE for your specific tasks.

€0.82
4.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
4.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT

Twist Drill — Type N, 4.2 mm, 135° point angle, short, bright finished, HSS‑G, DIN 338 The Twist Drill Type N is a short HSS‑G metal drill designed for precision drilling in demanding materials with a 135° point angle and a fully ground shank for high concentricity. Short design for improved stability HSS‑G geometry for precise metalworking 135° point angle for hard material entry Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Precision Material and Cutting Performance The short HSS‑G construction of this twist drill combines sharp cutting edges with material hardness optimised for metalworking. A ground flute geometry results in clean holes and high roundness, while the shorter overhang reduces vibration and bending. For users working with alloyed and unalloyed steel, cast steel, spheroidal graphite iron, non‑ferrous metals and hard plastics, this design translates into higher drilling speed and reduced feed force compared with conventional HSS tools. HSS‑G (ground High Speed Steel) means edges are manufactured by CNC grinding for better sharpness and hole quality. Designed for Demanding Metalwork Engineered as a Type N (normal spiral) twist drill, the 135° point angle facilitates controlled entry into harder workpieces and reduces the tendency to wander on start. This geometry shortens initial penetration time and improves centring when commencing a bore. Because the tool is a short variant, it is particularly suitable for stationary and hand‑guided drilling where stability and accuracy are critical. The cutter is therefore recommended for precision shops and maintenance tasks that require consistently round, burr‑reduced holes. Handling, Compatibility and Practical Advantages With an Overall Length of 75 mm and a Spiral Length of 43 mm, the short profile ensures a stiff setup when mounted in drill chucks. The fully ground cylindrical shank aids in secure clamping and precise run‑out on collets or chucks used in Drilling Machines and hand drills. Users will find less chatter and improved surface finish, which reduces subsequent rework. For laypersons: a fully ground shank means the shaft and flute were machined to exact tolerances rather than rolled, giving better balance and a sharper cutting geometry. Who Benefits Most from This Tool This short twist drill is aimed at professionals and advanced hobbyists who bore metals requiring repeatable accuracy—toolmakers, maintenance technicians and fabrication shops. Because the drill suits harder materials, it is less ideal for very soft woods where specialised wood bits give cleaner guidance; however, its robustness makes it versatile for many workshop applications. If precise, repeatable metal holes are your priority, this product meets those needs through focused engineering rather than general‑purpose compromise. Choose the MetavCUT Twist Drill Type N for precise metalworking and request expert technical advice from METAV Werkzeuge — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and recommendations Designation: Twist Drill (Short Twist Drill) Brand: MetavCUT SKU: 45042-FDA Diameter: 4.2 mm Point angle: 135° Type: Type N Material: HSS‑G Finish/Colour: Bright finished Execution: Short (kurz) Shank execution: Fully ground Spiral length: 43 mm Overall length: 75 mm For drilling machine: Drilling Machine / Hand Drill compatible Application: Drills for Metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (MetavCUT Type N) and when should it be chosen? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and ground flutes make it suitable for precision work in steel, cast alloys and hard plastics where stability and clean hole quality are required. Which three drill types exist and how does the MetavCUT Twist Drill fit in? The three common drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill family and is optimised for metalworking rather than for timber or masonry applications.

€1.04
4.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
4.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT

Spiralbohrer (Typ N) – 4,2 mm, 135°, kurz, TIN-beschichtet, HSS-G, geschliffen, DIN 338 Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS-G-Bohrer für präzise Metallbohrungen in stationären und handgeführten Maschinen. Spiralbohrer kurz für präzise Metallbohrungen HSS-G geschliffen mit TIN-Beschichtung für Langlebigkeit 135° Spitzenwinkel reduziert Anbohrneigung bei harten Werkstoffen DIN 338 konform, geeignet für Handbohrmaschine und Werkstatt Geschliffener Schaft für hervorragende Rundlaufgenauigkeit Stabilität und Präzision für anspruchsvolle Metallarbeiten Der kurze Spiralbohrer wurde als Kurzbohrer konzipiert, um die Auskraglänge zu reduzieren und damit Stabilität sowie Maßhaltigkeit beim Bohren zu erhöhen. Die geschliffene Fertigung sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, wodurch saubere Bohrlöcher in Metall erzielt werden. Für Werkstätten und Montageaufgaben bedeutet das weniger Nacharbeit und zuverlässige Passungen. Langlebigkeit und Effizienz dank Beschichtung und Material Die TIN-Beschichtung kombiniert mit dem HSS-G-Werkstoff reduziert Reibung und Verschleiß deutlich, was die Lebensdauer des Werkzeugs verlängert. Durch die geschliffene Geometrie kann das Bohren bis zu 40 % schneller erfolgen und erfordert dabei etwa 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Das steigert die Produktivität und schont Werkzeuge sowie Maschinenelemente. Vielseitige Anwendung und geeignete Werkstoffe Dieses Werkzeug eignet sich für das Bohren in legiertem und unlegiertem Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze sowie Hartkunststoff. Die Kombination aus Typ N-Normalspirale und dem 135° Spitzenwinkel macht das Werkzeug zuverlässig beim Anbohren harter Werkstoffe. In der Praxis ist der Bohrer sowohl für stationäre Säulenbohrmaschinen als auch für leistungsfähige Handbohrmaschinen einsetzbar. Hinweise zur Anwendung und Pflege für beste Ergebnisse Für hohe Genauigkeit empfiehlt sich bei sehr präzisen Passungen das Anpunkten mit einem Zentrierbohrer, insbesondere im Standard-Bereich um 4,2 mm. Die geschliffene Ausführung bietet Vorteile bei Sauberkeit und Rundlauf, vermeidet jedoch nicht die Notwendigkeit einer geeigneten Kühlung bei Dauerbelastung. Bei Fragen zur Auswahl oder zur optimalen Einsatzweise hilft die technische Beratung von METAV Werkzeuge kompetent weiter. Empfehlung: Für nachhaltige und präzise Metallbohrungen die MetavCUT Standard Line wählen; bei Unklarheiten wenden Sie sich bitte an METAV Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke/Hersteller: MetavCUT SKU: 46042-FDA Durchmesser: 4,2 mm Spitzenwinkel: 135° Ausführung: kurz Material: HSS-G Schaft Ausführung: geschliffen Spirallänge: 43 mm Gesamtlänge: 75 mm Farbe / Beschichtung: TIN-beschichtet Typ: Typ N (Normalspirale) Norm: DIN 338 Modellserie: Standard Line Für Bohrmaschine: Handbohrmaschine, stationäre Maschinen geeignet Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Handbohrmaschinen geeignet? Der Spiralbohrer von MetavCUT (Typ N) ist für den Einsatz in Handbohrmaschinen geeignet, da der Durchmesser 4,2 mm in den Bereich für handgeführte Arbeiten fällt; bei hoher Präzision empfiehlt sich jedoch vorheriges Anpunkten. Für welche Materialien ist der MetavCUT Spiralbohrer (Typ N) ausgelegt? Der MetavCUT Spiralbohrer (Typ N) eignet sich für legierte und unlegierte Stahlarten, Gusseisen, Temperguss sowie Nichteisenmetalle wie Kupfer und Bronze und verarbeitet auch Hartkunststoff zuverlässig. Wie verlängere ich die Standzeit des MetavCUT Spiralbohrers? Um die Standzeit des MetavCUT Spiralbohrers (Typ N) zu erhöhen, sollten Kühlung und geeignete Schnittgeschwindigkeiten verwendet werden; die TIN-Beschichtung reduziert Reibung und verschleißbedingte Schädigung. Welche Vorteile bietet die geschliffene Schaftausführung beim MetavCUT Spiralbohrer? Die geschliffene Schaftausführung des MetavCUT Spiralbohrers sorgt für sehr hohe Rundlaufgenauigkeit und scharfe Schneiden, was sauberere Bohrlöcher und bessere Maßhaltigkeit ermöglicht; dabei ist vorsichtige Handhabung empfohlen, da geschliffene Bohrer empfindlicher reagieren können. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#46042-FDA","sku":"46042-FDA","mpn":"46042-FDA","name":"Spiralbohrer 46042-FDA","description":"Kurzbohrer 4,2 mm, 135°, Typ N, TIN-beschichtet, HSS-G, geschliffen, DIN 338; kompakt ausgeführter Spiralbohrer für präzise Metallbohrungen in Handbohrmaschine und stationären Maschinen; erhöht Stabilität und Rundlaufgenauigkeit","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"4,2 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Farbe / Beschichtung","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"43 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"75 mm"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine, stationäre Maschinen geeignet"},{"@type":"PropertyValue","name":"Herstellerangabe","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}],"brand":null},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Spiralbohrer, Typ N) ist für den Einsatz in Handbohrmaschinen geeignet; bei hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer."}},{"@type":"Question","name":"Für welche Materialien ist der MetavCUT Spiralbohrer ausgelegt?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer (Spiralbohrer, Typ N) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze sowie Hartkunststoff."}},{"@type":"Question","name":"Wie verlängere ich die Standzeit des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Um die Standzeit des MetavCUT Spiralbohrers (Spiralbohrer, Typ N) zu erhöhen, Kühlung und geeignete Schnittgeschwindigkeiten verwenden; die TIN-Beschichtung reduziert Reibung und Verschleiß."}},{"@type":"Question","name":"Welche Vorteile bietet die geschliffene Schaftausführung beim MetavCUT Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Schaftausführung des MetavCUT Spiralbohrers (Spiralbohrer, Typ N) sorgt für hohe Rundlaufgenauigkeit und scharfe Schneiden, was sauberere Bohrlöcher und bessere Maßhaltigkeit ermöglicht; bei Dauerbelastung Kühlung einsetzen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/46042-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzbohrer für Metall"},{"@type":"Thing","name":"HSS-G geschliffen mit TIN-Beschichtung"},{"@type":"Thing","name":"DIN 338 konform"}],"mentions":[{"@type":"Thing","name":"Anwendung: Handbohrmaschine und stationäre Maschinen"},{"@type":"Thing","name":"Empfohlen: Anpunkten bei hoher Präzision"},{"@type":"Thing","name":"Vorteile: höhere Stabilität und Rundlaufgenauigkeit"}]}]}

€1.03
4.2mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
4.2mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT

Twist Drill (Spiralbohrer) — HSS-G long, 4.2 mm, 135° The Twist Drill (Spiralbohrer) is a long HSS-G drill bit designed for deep metal drilling with DIN 340 specification, ideal for use with a Drilling Machine. Long HSS-G design for deep holes Precise 4.2 mm diameter for accurate results 135° tip angle for harder materials Fully ground shank for high runout accuracy Bright finished surface for reduced adhesion High performance through HSS-G construction Designed as a long execution according to DIN 340, this HSS-G tool combines endurance and cutting efficiency. The fully ground geometry ensures sharp cutting edges and a high degree of roundness, which supports up to 40% faster drilling and requires 50% less feed force compared with conventional rolled HSS bits. This results in cleaner holes and less operator fatigue when working with legated and unlegated steels, cast materials and hard plastics. Deeper holes made accessible and precise With an overall length of 119 mm and a spiral length of 78 mm, the bit enables drilling in recessed or hard-to-access positions where standard lengths fall short. The 135° point angle improves performance on tougher materials by reducing initial chipping and improving centering, so fewer pilot operations are needed. This geometry is particularly suited to stainless and tempered steels where a flatter point reduces wander. Accurate handling and machine compatibility The ground shank and bright finish give excellent seating and reduced friction when clamped in chucks of a Drilling Machine. Because the bit is ground (HSS-G), it provides superior concentricity and hole quality; however, it is comparatively more brittle than rolled types and benefits from steady feed, proper cooling and preferably stationary machine use for maximum service life. The bit is engineered for routine workshop use and professional metalworking environments. Who benefits most from this design Production shops, maintenance teams and precision metalworkers will appreciate the combination of long reach and HSS-G performance for demanding tasks such as bushings, deep through-holes and repair work in cast and sintered parts. The tool is a reliable choice when deep, accurate holes in steels and non-ferrous metals are required and when regrinding capability is desirable for tool life extension. Strong recommendation: Choose the MetavCUT long HSS‑G Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert, personalised advice and technical support — Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 53042-FDA Durchmesser: 4.2 mm Spitzenwinkel: 135° Material: HSS-G Norm: DIN 340 Ausführung: long Gesamtlänge: 119 mm Spirallänge: 78 mm Schaft Ausführung: fully ground Farbe / Finish: bright finished Für Bohrmaschine: Drilling Machine Modellserie: Standard Line Anwendungen: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill (Spiralbohrer) used? The Twist Drill from MetavCUT is primarily applied to machining high-strength materials and large drill diameters; its long design supports deeper holes and working in hard-to-reach positions. The ground form is easy to re-sharpen and withstands considerable loads, making it suitable for tougher metalworking tasks. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for steels and similar materials. Why are Twist Drills re-sharpened (ausgespitzt)? Re-sharpening reduces the cross-edge at the tip, which lowers friction and thus requires less feed force; for the MetavCUT Twist Drill this improves centring and reduces cutting forces during the initial penetration into the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill such as the MetavCUT HSS-G Twist Drill can be used in wood, but guidance is poorer and the hole finish is not as clean as with a dedicated wood bit; metal drills are easier to re-sharpen and tend to have less self-feeding action in timber. For which drilling depths is the Twist Drill most used? A solid through hole is typically executed with a Twist Drill; for diameters up to about 20 mm and depths up to 100 mm the Twist Drill is the most frequently used tool, and the MetavCUT long execution is well suited for deeper bores. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is not universally true. When choosing, evaluate whether the working conditions justify the higher cost of HSSE; the MetavCUT HSS-G long drill offers excellent performance for many standard applications. Are you unsure whether this tool meets your requirements or need additional technical data? METAV Werkzeuge provides comprehensive, expert consultation — Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271

€1.68
Cheap Shipping Cost
fast shipment
Advice before purchase
Purchase comfortable on account
Hotline +49 2822 7131930