Twist Drill — Type N short, 8.2 mm, 135° tip, 5% cobalt-alloyed, HSS‑E, DIN 338 (MetavCUT) A Twist Drill Type N short designed for precision metal drilling with Drilling Machines, offering enhanced stability and wear resistance for demanding workshop tasks. Short design for higher stability 5% cobalt-alloyed HSS‑E for heat resistance 8.2 mm diameter with 135° tip for hard metals Fully ground shank for accurate runout Conforms to DIN 338 for standardised quality Stable drilling in hard materials that reduces vibration and breakage The short design of this drill gives a reduced overhang and therefore higher stability during machining. With an 8.2 mm diameter and a spiral length of 75 mm, the geometry minimises bending forces when used in a Hand Drill or on stationary Drilling Machines. For operations in tougher materials the compact length helps to keep the tool steady, which reduces chatter and the risk of sudden breakage while improving hole accuracy and surface finish. Material choice and cutting geometry for longer tool life Made from HSS‑E and alloyed with 5% cobalt, the drill maintains cutting hardness and heat resistance at elevated temperatures. The 135° tip angle is optimised for penetrating hardened and stainless steels, shortening the initial piercing time and improving centring in the workpiece. The combination of material and geometry makes the tool suitable for alloys and cast iron while preserving cutting edges when proper cooling is applied. Precision manufacture: grinding, runout and compliance This item is produced as a fully ground (HSS‑G) short Twist Drill rather than roll‑formed, which results in very sharp cutting lips and high concentricity. The ground flutes and accurately ground shank improve runout and produce clean bore surfaces, especially important when drilling small diameters in metal. Conformity to DIN 338 ensures the dimensions and tolerances meet recognised standards for short cylindrical shank drills. Who benefits most: applications and working tips Engineers, toolroom technicians and advanced hobbyists working with metal will value the performance of this short Type N drill for precise tasks and for drilling up to depths compatible with a 75 mm spiral length. Use moderate speeds, appropriate cutting fluid and a steady feed to exploit the cobalt alloy’s heat resistance. If drilling non‑ferrous materials or wood, expect less guidance than with specialised wood drills; however the tool can still be used with care for multi‑purpose tasks. We recommend the MetavCUT Twist Drill Type N short for precision metalworking; for individual advice on feeds, speeds or tool selection contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 47082-FDA Diameter: 8.2 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Type: Type N Execution: short Shank execution: fully ground Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill and where does it perform best? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength metals and for larger hole diameters in metalworking; its short design improves stability and precision when drilling steels, castings and non‑ferrous alloys. Which three drill types exist and how does this product fit in? There are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill group and is engineered for use in metalworking applications. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip of a Twist Drill, which lowers friction and the necessary feed force; this also improves centring so the tip starts the hole more accurately in the workpiece. Can a metal Twist Drill be used to drill wood? A Metal drill can be used in Wood, but the guidance is generally poorer and the hole finish may not be as clean; however metal drills are easier to resharpen and tend to have a lower self‑feeding tendency compared to specialised wood bits. For which hole depths is the Twist Drill most commonly used? A full bore into solid material is typically made with a Twist Drill; for diameters up to about 20 mm and drilling depths to around 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are always superior to standard HSS is not universally correct; selection should be based on working conditions and whether the additional cost of HSSE is justified for your specific application.

Twist Drill — Type N short, 8.2 mm, 135°, HSS‑G, Bright Finished, Fully Ground Shank, DIN 338 The Twist Drill Type N short is a precision metal‑drilling tool for Drilling Machines, offering an 8.2 mm diameter and a 135° tip for reliable penetration in hard materials. Twist Drill Type N, 8.2 mm, 135° tip Short design for higher stability and precision HSS‑G ground for fast drilling and clean holes Sized to machine drilling in metals per DIN 338 Bright finished with fully ground shank Short design increases accuracy and reduces vibration A shorter overall length combined with a reduced overhang provides noticeably higher stability during machining, which is particularly advantageous when working on tough alloys. The compact geometry lowers the tendency to bend or chatter, so operators achieve more consistent hole quality under load. For workshop set‑ups where rigidity matters, the short execution of this tool supports precise centring and smoother feeds. HSS‑G ground geometry for faster, cleaner holes in metal The HSS‑G (ground high‑speed steel) construction yields very sharp cutting edges and excellent roundness, enabling up to 40% faster drilling speeds with significantly reduced feed forces compared with conventional HSS. Combined with the 135° tip geometry, the tool is optimised for harder materials and reduces the risk of workpiece deformation while improving tool life when used with appropriate coolant. Fully ground shank and bright finish for reliable clamping A fully ground cylindrical shank ensures uniform clamping in chucks and holders, minimising run‑out and enhancing concentricity for deeper or repeated bores. The bright finished surface facilitates chip evacuation and inspection, while the compliance with DIN 338 confirms the tool class and dimensional tolerances expected in professional metalworking environments. Best suited for professional metalworking and demanding tasks Engineers and machinists who require robust performance in steel, castings and non‑ferrous metals will appreciate the balance of durability and precision offered by this Type N Twist Drill. The tool is designed primarily for machine drilling operations and excels where repeatable accuracy and clean bore edges are required, for example in toolrooms, maintenance shops and production lines. Choose the MetavCUT Twist Drill Type N short with HSS‑G grind for demanding metal applications — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45082-FDA Diameter: 8.2 mm Tip angle: 135° Type: Type N Material: HSS-G Execution: short Spiral length: 75 mm Total length: 117 mm Shank finish: fully ground Colour / Finish: bright finished Application: Drills for metal Model series: Standard Line Standard: DIN 338 Shaft execution: geschliffen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking operations; it is particularly effective when machining steels, cast irons and other harder materials on Drilling Machines, offering stable performance for precision bores. Can the Twist Drill be used in portable drills? While the Twist Drill Type N is designed for machine drilling, it can be used in Handheld Drilling Machines for lighter tasks; however the short geometry shows its full advantages in rigid, machine‑mounted setups to maintain concentricity and hole quality. For what is Twist Drill used? The Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. Which 3 drill types exist? There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills pointed (regrinded)? Pointing reduces the web thickness at the tip of the Twist Drill. By pointing, frictional forces are substantially lowered so that smaller feed forces are required and the tip centres better in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood but typically gives poorer guidance and a less clean result. However, such drills are easier to resharpen and exhibit less aggressive self‑feeding.

Twist Drill — Type N, 8.3 mm, 118° tip, HSS, short, black, DIN 338 (MetavCUT) The Twist Drill (Type N) is a short HSS drill bit designed for precision metal drilling with Drilling Machines and workshop hand drills. Short HSS construction for greater stability Conforms to DIN 338 for consistent quality 8.3 mm diameter for standard metal drilling 118° tip for improved centring and faster entry Suitable for Drilling Machine and heavy-duty tasks Reliable stability and precision for metalworking The short HSS design and the reduced overhang provide noticeably higher stability when drilling into metal, reducing bending and chatter. As a Type N normal-spiral bit, this tool excels at creating clean, concentric holes in both unalloyed and alloyed steels; the shorter geometry also improves tool life under repeated loading. For workshop environments where repeatable accuracy matters, the compact length and robust construction translate directly into fewer rejected parts and less rework. Material advantages and tip geometry explained Manufactured from High Speed Steel (HSS) and adhering to DIN 338, the drill combines toughness and heat resistance for typical metalworking tasks. The 118° tip offers a balanced entry characteristic that aids centring on curved or slightly uneven surfaces while keeping cutting forces moderate. In practical terms, this means lower risk of walking at the start of a hole and smoother engagement when used with appropriate cutting speeds and lubrication. The short execution also simplifies regrinding and maintenance. Intended use and suitability for professionals Engineered for the demands of metal drilling, the bit is particularly suitable for production and maintenance tasks in workshops and industrial settings. With an effective spiral length of 75 mm and a total length of 117 mm, the geometry is optimised for machining tasks where rigidity is essential. Users such as fabricators, toolroom technicians and mechanical maintenance teams will value the combination of DIN 338 conformity and the roll-formed HSS production method that balances resilience and resharpenability. Choose the MetavCUT Twist Drill Type N for dependable metal drilling performance — for further technical guidance or to confirm suitability for a specific application contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40083-FDA Diameter: 8.3 mm Spiral length: 75 mm Total length: 117 mm Tip angle: 118° Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black Suitable for: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is used primarily for drilling metal; it is designed to handle alloyed and unalloyed steels, cast iron, non-ferrous metals and certain plastics when appropriate speeds and coolant are applied. Why are Twist Drills sharpened and what benefit does that bring? The tip sharpening reduces the cross-cutting edge at the point of the Twist Drill, which significantly lowers friction and therefore the required feed force; a properly sharpened tip also improves centring and prolongs effective life during production runs. For what is a Twist Drill mainly applied? A Twist Drill is mainly applied to the machining of high-strength materials and large bore diameters; its form allows relatively easy resharpening and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? Commonly distinguished drill types include metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills category. Can a Twist Drill be used to drill wood? The metal Twist Drill can be used in wood, but guidance and finish are typically inferior to dedicated wood bits; metal bits may have worse guidance and a less clean hole, although they are easier to resharpen and have lower self-feeding tendency. At which drilling depths is the Twist Drill most commonly used? A through-hole (solid material) is commonly made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.

Twist Drill — Type N, 8.3 mm, 135° tip, short, 5% cobalt-alloyed, HSS‑E, DIN 338, fully ground The Twist Drill Type N is a short HSS‑E metalworking drill designed for precision drilling in hard materials with Drilling Machines. Short design for increased rigidity and precision Fully ground flutes for sharp edges and clean holes 8.3 mm Diameter with 135° tip for hard metals Conforms to DIN 338 for short cylinder‑shank drills 5% cobalt‑alloyed for enhanced heat resistance High‑precision drilling thanks to a short, rigid design The short execution of this Twist Drill reduces overhang and significantly improves stability during machining, which leads to more precise hole geometry and lower runout. For operations in steel and other hard alloys the reduced cantilever length minimises bending forces and vibration, increasing tool life under comparable conditions. This makes the drill particularly suitable where tight tolerances and concentricity are required. Sharp, ground geometry for clean metal holes A fully ground flute geometry produces very sharp cutting edges and high concentricity. The fully ground manufacturing method delivers precise cutting geometry that results in cleaner hole surfaces and consistent diameters when drilling metals. While rolled drills can be tougher, the ground version provides superior finish and dimensional accuracy, especially in demanding stationary or machine‑guided applications. Material choice and tip geometry tailored for hard materials Manufactured from HSS‑E with a 5% cobalt alloy, the drill combines toughness with elevated hot hardness for higher cutting temperatures. The 135° tip angle reduces initial cutting forces and is optimised for hard steels and stainless materials, shortening dwell during entry. For users unfamiliar with tip angles: a larger tip angle flattens the point and spreads cutting load, which helps when penetrating high‑strength materials. Suitable applications and typical working conditions This Type N Twist Drill is intended primarily as a metal drill for use on Drilling Machines and similar equipment, handling alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. Due to its ground geometry, the tool is best used with appropriate coolant and controlled feed to avoid chipping; it excels in precision workshop and production environments where clean, repeatable holes are required. Who benefits from this drill Metalworkers, toolroom technicians and production engineers who require accurate, repeatable holes in harder materials will value the combination of a short gaging length, HSS‑E material and a 135° tip. The design is aimed at users seeking improved stability and hole quality rather than extreme flexibility for long deep drilling; it is therefore particularly well‑suited to machine‑based drilling tasks. For questions about suitability or for additional technical data, consult MetavCUT products and speak to METAV Werkzeuge for personalised advice via info@metav-werkzeuge.com or by phone Twist Drill Brand: MetavCUT SKU: 47083-FDA Diameter: 8.3 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Execution: short Shank version: fully ground Material: HSS‑E (5% cobalt‑alloyed) Type: Type N (Normal spiral) Application: Drills for metal / Bohrer für Metall Standard: DIN 338 Suitable for: Drilling Machine / Hand drills when machine guidance is available Manufacturer: MetavCUT Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill (MetavCUT, Type N)? The Twist Drill from MetavCUT, Type N, is primarily used for metalworking tasks and excels when drilling alloyed and unalloyed steels, cast iron and many non‑ferrous metals. Its short design and HSS‑E composition make it especially suitable for precise, machine‑guided holes in harder materials. Which three drill types exist and how does this Twist Drill relate to them? Common drill families are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill (Type N) belongs to the metal‑drill category and is optimised for machining metals rather than timber or stone. For what is a Twist Drill mainly used? A Twist Drill is mainly applied in the machining of high‑strength materials and larger diameters; its geometry is relatively easy to resharpen and it withstands substantial loads. The shape and heat treatment permit reliable use in demanding metal drilling operations. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip of the Twist Drill, lowering friction and therefore required feed force; this also improves centring and reduces walking, enabling easier, more controlled penetration into the workpiece. If you are unsure whether this drill meets your exact requirements or need further technical clarification, METAV Werkzeuge offers expert support and consultation. Contact METAV Werkzeuge for tailored advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271

Twist Drill — Short Type N Drill for Metal, 8.3 mm, 135° Point Angle, Bright Finish, HSS‑G, DIN 338 The Twist Drill (Short, Type N) is a precision drill for metalwork, optimised for stable, high‑performance drilling on drilling machines. Short design for increased stability 135° point angle for hard materials HSS‑G fully ground for sharp cutting edges Fully ground shank for precise chucking Conforms to DIN 338 for standardised quality Faster, cleaner holes thanks to ground HSS technology The short design in combination with HSS‑G (ground high speed steel) reduces cutting resistance and produces very sharp edges, enabling up to 40% faster drilling and requiring around 50% less feed force compared with conventional HSS drills. This results in cleaner hole edges and less heat buildup during interrupted drilling. The ground geometry is produced by CNC grinding, which improves roundness and repeatability, making it ideal where consistent hole quality matters. Greater stability and accuracy when working harder materials A reduced overhang and compact spiral length mean the cutter is less prone to deflection; this short format therefore delivers superior precision when machining steel and similar materials. The 135° point angle is optimised for harder workpieces such as stainless and alloyed steels, while the Type N normal spiral is the classic configuration for metal drilling. The geometry helps centre the tool reliably and reduces walking at the start of the hole. Practical guidance for prolonged tool life and optimal results For best performance use on a suitable drilling machine with correct clamping and, where appropriate, coolant or cutting fluid to control temperature. The fully ground shank ensures accurate holding in the chuck and minimises runout; however, ground HSS can be more brittle than rolled designs, so avoid excessive lateral loads and abrupt shocks. Re‑sharpening is possible but should follow the original geometry to preserve the 135° tip profile and cutting rake. Who benefits: precision metalworkers and maintenance professionals This short drill is aimed at professional machinists, toolroom staff and maintenance technicians who require reproducible holes in a range of metals. Key dimensions provide clear handling and setup advantages: Diameter 8.3 mm, Spiral Length 75 mm, Overall Length 117 mm, bright finish for corrosion resistance and easy identification. The construction and conformity to DIN 338 make it a reliable choice for production and repair environments. For precise metalworking choose MetavCUT's Twist Drill — expert advice and support are available from METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill (Short, Type N) Brand: MetavCUT SKU: 45083-FDA Diameter: 8.3 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Type: Type N Execution: short Material: HSS-G Shank Finish: fully ground Colour / Finish: bright finished Application: Drills for metal Suitable For: drilling machine Model Series: Standard Line Norm / Standard: DIN 338 Manufacturer Contact: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The Twist Drill from MetavCUT is primarily used for machining metal; it is especially suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its short design and ground geometry make it appropriate for precise operations on drilling machines where stability and clean holes are required. Which three drill types are commonly distinguished? In general classification the main drill groups are metal drill, wood drill, and stone/concrete drill. MetavCUT's Twist Drill belongs to the metal drill category and is engineered specifically for metalworking applications.

Spiralbohrer HSS, kurz, Typ N, 8,4 mm, 118°, schwarz, DIN 338 von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzise Metallbohrungen und eignet sich besonders für Handbohrmaschine-Einsätze in Werkstatt und Montage. Spiralbohrer HSS nach DIN 338 für Metallbearbeitung kurz-Ausführung für erhöhte Stabilität beim Bohren 8,4 mm Durchmesser und 118° Spitzenwinkel für Präzision Typ N Normalschaft für Handbohrmaschine geeignet Spirallänge 75 mm sorgt für sichere Spanabfuhr Hochleistungsstahl für belastbare Bohrungen und lange Standzeiten Der Einsatz von HSS macht diesen Spiralbohrer widerstandsfähig gegen thermische und mechanische Belastungen bei der Metallbearbeitung. HSS bietet Elastizität und eine gute Zähigkeit, wodurch das Risiko von Bruch bei üblichen Werkstattanwendungen reduziert wird. Die Fertigungsoptionen Rollgewalzt oder Geschliffen sorgen für konstante Geometrie und damit für gleichmäßige Leistungswerte bei Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Kurz-Ausführung für mehr Präzision und weniger Vibration Die kurz-Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität während des Bohrens. In Kombination mit der Spirallänge 75 mm wird die Spanabfuhr verbessert, was saubere Bohrbilder und geringere Erwärmung zur Folge hat. Der 118° Spitzenwinkel erleichtert das Anbohren auf gewölbten oder unebenen Oberflächen und trägt zur Zentrierbarkeit und gleichmäßigen Spanbildung bei. Geeignetes Einsatzfeld und Maschinenkompatibilität Als Vertreter des Standard-Bereichs ist dieser Spiralbohrer ideal für Alltagseinsätze in Werkstatt, Montage und DIY-Projekten. Anwendungen umfassen dünne bis mittlere Bleche, Profile und Flachstähle sowie Arbeiten in Aluminium und Kunststoff. Die Konstruktion als Typ N Normalschaft macht ihn kompatibel zu gängigen Handbohrmaschine-Aufnahmen. Für hochpräzise Passungen empfiehlt sich vor dem Bohren ein Anpunktieren oder Zentrieren. Praktische Hinweise für sicheres und wirtschaftliches Bohren Verwenden Sie geeignete Schnittgeschwindigkeiten und bei Bedarf Kühlschmierstoffe, um Standzeit und Bohrbild zu optimieren. Vermeiden Sie extrem tiefe Bohrungen über das Fünffache des Durchmessers ohne spezielle Spanabfuhrstrategien. Bei ungewöhnlichen Werkstücken oder Serienaufträgen bietet sich das Vorbohren an, um die Querschneide zu entlasten und die Maßhaltigkeit zu sichern. Für präzise Metallbohrungen empfiehlt MetavCUT diesen Spiralbohrer HSS kurz Typ N mit 8,4 mm und 118° Spitzenwinkel; bei Fragen und Beratung steht METAV Werkzeuge gerne zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40084-FDA Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Durchmesser: 8,4 mm Spitzenwinkel: 118° Gesamtlänge: 117 mm Spirallänge: 75 mm Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer MetavCUT HSS Typ N für unterschiedliche Metallarten? Der Spiralbohrer von MetavCUT in HSS-Ausführung ist ausgelegt für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; durch die Materialwahl bleibt die Zähigkeit erhalten und ermöglicht zuverlässige Bohrungen in diesen Werkstoffen. Kann der Spiralbohrer MetavCUT HSS Typ N mit einer Handbohrmaschine genutzt werden? Ja, der Spiralbohrer MetavCUT mit Typ N Normalschaft ist für die Verwendung in Handbohrmaschine konzipiert und bietet in der kurz-Ausführung eine verbesserte Stabilität für handgeführte Anwendungen. Welche Vorteile bringt der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N? Der 118° Spitzenwinkel des Spiralbohrers MetavCUT erleichtert das Anbohren und unterstützt eine gleichmäßige Spanbildung, was insbesondere bei gewölbten oder leicht unebenen Flächen zu präziseren Ergebnissen führt. Wie kann die Standzeit des Spiralbohrers MetavCUT HSS Typ N verlängert werden? Um die Standzeit des Spiralbohrers MetavCUT zu erhöhen, sollten passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und bei hohen Anforderungen das Vorbohren bzw. punktgenaues Zentrieren eingesetzt werden; regelmäßige Kontrolle von Bohrbild und Spanabfuhr trägt zusätzlich zur Wirtschaftlichkeit bei. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40084-FDA","sku":"40084-FDA","mpn":"40084-FDA","name":"Spiralbohrer 40084-FDA","description":"Spiralbohrer HSS kurz Typ N, 8,4 mm Durchmesser, 118° Spitzenwinkel, schwarze Oberfläche, DIN 338; Kurz-Ausführung für höhere Stabilität und verbesserte Spanabfuhr; geeignet für Handbohrmaschine und Metallbearbeitung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,4 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Metallarten eignet sich der Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT HSS Typ N eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und bietet durch HSS hohe Zähigkeit und Belastbarkeit."}},{"@type":"Question","name":"Kann der Spiralbohrer MetavCUT HSS Typ N in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT HSS Typ N ist mit Normalschaft ausgeführt und für den Einsatz in Handbohrmaschine geeignet; die kurz-Ausführung erhöht dabei die Stabilität."}},{"@type":"Question","name":"Welche Vorteile hat der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel erleichtert das Anbohren, verbessert die Zentrierbarkeit und fördert eine gleichmäßige Spanbildung, besonders bei gewölbten oder leicht unebenen Oberflächen."}},{"@type":"Question","name":"Wie verlängert man die Standzeit des Spiralbohrers MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Zur Verlängerung der Standzeit des Spiralbohrers MetavCUT HSS Typ N werden passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und Vorbohren bzw. punktgenaues Zentrieren empfohlen; regelmäßige Kontrolle von Bohrbild und Spanabfuhr hilft zusätzlich."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS kurz"},{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"DIN 338 Norm"}],"mentions":[{"@type":"Thing","name":"Typ N Normalschaft"},{"@type":"Thing","name":"Spirallänge 75 mm"},{"@type":"Thing","name":"Kurz-Ausführung für Stabilität"}]}]}

Twist Drill — Type N short HSS‑E, 8.4 mm, 135°, 5% cobalt‑alloyed (DIN 338) The Twist Drill Type N short is a precision metal‑working drill for drilling machines, designed for stable, accurate holes in hard materials such as steel. Short execution for higher stability and precision 8.4 mm Diameter for common metalworking tasks 135° Point Angle for harder materials and stainless steel HSS‑E with 5% cobalt‑alloyed for improved heat resistance Fully ground shank and DIN 338 conformity for accurate bores Reliable performance through material and geometry The short design delivers significantly improved stability during machining by reducing overhang, which results in more concentric holes and less vibration. Manufactured from HSS‑E with 5% cobalt‑alloyed composition, this drill maintains cutting performance at higher temperatures and under heavy loads, making it suitable for alloyed and unalloyed steel as well as cast iron and non‑ferrous metals. The 135° point angle reduces walking on hard surfaces and shortens the plunge time, helping achieve clean starts even on tough materials. Ideal use cases and users who benefit most Engineered for metalworking professionals and workshops, the short Type N Twist Drill excels in precision tasks on drilling machines and stationaries; it is recommended where rigidity and exact hole quality matter. Its properties make it particularly useful for workshop machinists, maintenance technicians and professionals who require reproducible bores in metal components. The reduced breakage risk for diameters below 6 mm—carried over in the short design philosophy—translates into dependable performance across frequent production environments. Design details that improve handling and results The fully ground flute geometry (HSS‑G style) produces sharp cutting edges and high runout accuracy, which contributes to clean, burr‑reduced holes and easier re‑sharpening when needed. Conforming to DIN 338, this short Twist Drill follows standardised dimensions and tolerances for short cylindrical shank drills, ensuring compatibility with standard tooling and chucks. With a spiral length of 75 mm and an overall length of 117 mm, the geometry balances chip evacuation and rigidity for controlled drilling in metal. Choose MetavCUT's Twist Drill Type N for dependable, precision metal drilling — for further technical advice or individual application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer), short execution, Type N, 8.4 mm diameter Brand: MetavCUT SKU: 47084-FDA Material: HSS‑E Cobalt content: 5% cobalt‑alloyed Point angle: 135° Execution: short Spiral length: 75 mm Overall length: 117 mm Shank: fully ground Model series: Standard Line Application: Drills for metal / For Drilling Machine Norm: DIN 338 Shaft finishing: geschliffen (fully ground) Bezeichnung (English): Twist Drill Typ: Type N Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily applied when machining high‑strength materials and larger drill diameters; its short design and HSS‑E composition make it easy to re‑grind and capable of withstanding higher mechanical stress. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group, optimised for steel and similar materials. Why are Twist Drills tip‑sharpened? The tip sharpening reduces the cross‑cut at the drill point. For the MetavCUT Twist Drill Type N this lowers friction forces, reduces required feed and improves centring of the tip in the workpiece. Can a Twist Drill be used to drill wood? A MetavCUT Twist Drill Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑sharpen and have less self‑feed, resulting in a rougher hole. At what drilling depths is the Twist Drill most used? For through‑hole operations, the Twist Drill is typically used up to diameters around 20 mm and drilling depths up to about 100 mm; the MetavCUT Twist Drill Type N is well suited for solid drilling in these common metalworking ranges. What is better, HSS or HSSE? The general assumption that HSSE is universally superior to HSS is not correct; when choosing, evaluate whether the working conditions justify the higher cost. MetavCUT offers HSS‑E options that balance toughness and heat resistance for many metalworking tasks.

Spiralbohrer kurz, Durchmesser 8,4 mm, Spitzenwinkel 135°, Typ N, Farbe blank, Ausführung geschliffen, Norm DIN 338, Material HSS-G — MetavCUT Standard Line Der Spiralbohrer ist ein kurzer HSS-G Metallbohrer für präzise Bohrungen in legierten und unlegierten Stahl sowie Gusswerkstoffen und eignet sich für den Einsatz an Handbohrmaschinen und stationären Maschinen. Hochstabile kurze Ausführung für präzise Bohrungen HSS-G geschliffen für saubere Metallbohrungen Spitzenwinkel 135° ideal für harte Werkstoffe Norm DIN 338: kurze Spiralbohrer mit Zylinderschaft Geeignet für Handbohrmaschine und stationäre Anwendung Schnelleres Bohren bei geringerer Anpresskraft Mit dem geschliffenen HSS-G Kurzbohrer wird die Bohrperformance deutlich gesteigert: Herstelleraussagen zufolge führt die besondere Geometrie zu bis zu 40 % schnellerem Bohren bei gleichzeitig rund 50 % reduzierter Anpresskraft gegenüber konventionellen HSS-Bohrern. Das Ergebnis ist ein schnellerer Arbeitsfortschritt bei weniger Ermüdung des Anwenders. Anwender in Werkstatt und Produktion profitieren von kurzen Taktzeiten und geringerem Werkzeugverschleiß, wenn Kühlung und passende Schnittparameter genutzt werden. Hohe Stabilität und saubere Bohrbilder auch in harten Werkstoffen Die kurze Ausführung reduziert die Auskraglänge und verbessert dadurch die Steifigkeit der Bohrung, was zu saubereren Bohrbildern und reduziertem Ausschlag führt. Durch den Spitzenwinkel 135° dringt der Bohrer leichter in harte Werkstoffe wie Edelstahl und Temperguss ein und minimiert Aufreißen am Bohrrand. Für Durchmesser im Bereich von 2 mm bis 13 mm ist diese Bauart besonders geeignet, da sie sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Säulenbohrmaschinen zuverlässige Ergebnisse liefert. Präzision durch geschliffene Fertigung und Normkonformität Die Ausführung geschliffen bedeutet, dass die Geometrie mittels CNC-Schliff erzeugt wurde, was sehr scharfe Kanten, hohe Rundlaufgenauigkeit und saubere Spanabfuhr ermöglicht. Diese Fertigungsweise ist gemessen an der Norm DIN 338 typisch für kurze Spiralbohrer mit Zylinderschaft und bietet gegenüber rollgewalzten Varianten Vorteile in Präzision und Oberflächenqualität der Bohrung. Bei stationärer Anwendung und ausreichender Kühlschmierung zeigt sich die beste Standzeit. Typische Einsatzbereiche und Anwendergruppen Für Mechaniker, Instandhalter und anspruchsvolle Heimwerker ist dieser Kurzbohrer die richtige Wahl, wenn es um präzise Metallbearbeitung geht. Der Bohrer eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Beachten: Für sehr tiefe Bohrungen über das Fünffache des Durchmessers hinaus oder für extrem zähe Materialien sind spezielle Verfahren oder Hartmetallwerkzeuge sinnvoller, da hier die Spanabfuhr und thermische Beanspruchung kritisch werden. Empfehlung: Den geschliffenen Spiralbohrer von MetavCUT wählen und bei Bedarf die technische Beratung von Metav Werkzeuge per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 in Anspruch nehmen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 45084-FDA Durchmesser: 8,4 mm Spiralänge: 75 mm Gesamtlänge: 117 mm Ausführung: kurz Schaftausführung: geschliffen Material: HSS-G Typ: Typ N Spitzenwinkel: 135° Farbe: blank Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie schnell bohrt der Spiralbohrer von MetavCUT in Stahl? Der Spiralbohrer von MetavCUT in HSS-G ist für schnelle Bearbeitung optimiert und ermöglicht laut Herstellerangaben bis zu 40 % schnellere Vorschubraten im Vergleich zu herkömmlichen HSS-Bohrern, wenn geeignete Schnittwerte und Kühlung verwendet werden. Ist der Spiralbohrer von MetavCUT für Handbohrmaschinen geeignet? Ja, der Spiralbohrer von MetavCUT in der kurzen Ausführung wurde speziell auch für den Einsatz an Handbohrmaschinen und stationären Maschinen im Bereich 2 mm bis 13 mm entwickelt und bietet durch die reduzierte Auskraglänge erhöhte Stabilität. Welche Materialien lassen sich mit dem Spiralbohrer MetavCUT bearbeiten? Der Spiralbohrer MetavCUT eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe; bei besonders zähen Werkstoffen sind spezielle Hartmetallwerkzeuge empfehlenswert. Warum ist die geschliffene Ausführung beim Spiralbohrer wichtig? Die geschliffene Ausführung des Spiralbohrer sorgt für hohe Schärfe und Rundlaufgenauigkeit, was saubere Bohrbilder in Metall ermöglicht; MetavCUT empfiehlt bei stationärer Verwendung Kühlung zur Steigerung der Standzeit. Wer kann bei Unsicherheit zur Eignung des Bohrers beraten werden? Bei Fragen zur Eignung des Spiralbohrer von MetavCUT oder für ergänzende technische Daten steht die Beratung von Metav Werkzeuge gern zur Verfügung: info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#45084-FDA","sku":"45084-FDA","mpn":"45084-FDA","name":"Spiralbohrer 45084-FDA","description":"Kurzer Spiralbohrer, Durchmesser 8,4 mm, Spitzenwinkel 135°, Typ N, Farbe blank, Ausführung geschliffen, Norm DIN 338, Material HSS-G. Geeignet für präzise Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen; optimiert für Handbohrmaschine und stationäre Maschinen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"45084-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,4 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Preis netto","value":"3.88 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie schnell bohrt der Spiralbohrer von MetavCUT in Stahl?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT in HSS-G ermöglicht laut Herstellerangaben bis zu 40 % schnellere Vorschubraten im Vergleich zu herkömmlichen HSS-Bohrern, sofern geeignete Schnittwerte und Kühlung verwendet werden."}},{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurze Spiralbohrer MetavCUT mit Durchmesser 8,4 mm wurde speziell für den Einsatz an Handbohrmaschinen und stationären Maschinen entwickelt und bietet durch die reduzierte Auskraglänge erhöhte Stabilität."}},{"@type":"Question","name":"Welche Materialien lassen sich mit dem Spiralbohrer MetavCUT bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe; bei besonders zähen Werkstoffen sind Hartmetallwerkzeuge empfehlenswert."}},{"@type":"Question","name":"Warum ist die geschliffene Ausführung beim Spiralbohrer wichtig?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Ausführung (HSS-G) sorgt für sehr scharfe Kanten, hohe Rundlaufgenauigkeit und saubere Spanabfuhr, was zu präzisen Bohrlöchern in Metall führt; bei stationärer Verwendung wird Kühlung zur Standzeitsteigerung empfohlen."}},{"@type":"Question","name":"Wer kann bei Unsicherheit zur Eignung des Bohrers beraten werden?","acceptedAnswer":{"@type":"Answer","text":"Bei Fragen zur Eignung des Spiralbohrer MetavCUT oder für ergänzende technische Daten steht die Beratung von Metav Werkzeuge zur Verfügung: info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/45084-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer kurze Ausführung"},{"@type":"Thing","name":"HSS-G geschliffen für Metallbearbeitung"},{"@type":"Thing","name":"Norm DIN 338"}],"mentions":[{"@type":"Thing","name":"Einsatz an Handbohrmaschine"},{"@type":"Thing","name":"Geeignet für legierte und unlegierte Stähle"},{"@type":"Thing","name":"Spitzenwinkel 135° für harte Werkstoffe"}]}]

Twist Drill — Type N short HSS drill, 8.5 mm, 118° tip, black, DIN 338, MetavCUT The Twist Drill Type N short HSS metal drill is a compact, precision tool for drilling in a wide range of metals using a standard drilling machine. Short design for higher stability HSS material — resilient for metal drilling 8.5 mm diameter suitable for metalwork 118° tip for reliable centring DIN 338 conformity for consistent quality Durable HSS construction for demanding metalwork The Twist Drill combines a HSS (High Speed Steel) body with a short overall length to deliver improved rigidity and reduced vibration when working on metal. The DIN 338 specification ensures the drill meets standardized dimensions and tolerances for short twist drills with a cylindrical shank, which supports consistent clamping and repeatable results. This construction improves tool life under frequent use and stabilises the drilling process for precise holes in alloyed and unalloyed steel, cast iron and non‑ferrous metals. Reliable cutting geometry for accurate starts A 118° tip angle and the Type N normal spiral geometry make this drill particularly effective at centring and initial penetration in softer and medium‑hard metals. The design reduces the tendency to wander at the start of a hole while maintaining efficient chip evacuation. For users this means fewer re‑starts, cleaner hole edges and improved dimensional accuracy when used in a suitable drilling machine or handheld drilling machine designed for metalwork. Short length for improved precision and tool life The short execution reduces overhang from the chuck and significantly lowers the risk of deflection during drilling. This results in better concentricity and less workpiece damage when machining close tolerances. For workshop environments where repeatability matters, the compact short format offers a practical balance between reach and stiffness, making it well suited for fixture work, small components and repair tasks where a standard long drill would bend or chatter. Practical guidance and safe use When using this Type N Twist Drill, select appropriate cutting speed and cooling for the metal being machined and secure the workpiece firmly. Re‑sharpening is straightforward thanks to the classic geometry; proper resharpening maintains the reduced cross‑edge and keeps the drill centred. If unsure about optimum speeds or feed for a specific alloy, METAV Werkzeuge provides expert advice and technical support to help choose the right operating parameters and accessories for the task. Strong recommendation: For precise, reliable metal drilling choose the MetavCUT Twist Drill Type N short HSS with DIN 338 specification — METAV Werkzeuge offers professional consultation and personalised technical support via e‑mail, phone or WhatsApp to ensure the tool meets the project requirements Are you unsure whether this drill matches your needs or require additional technical data? METAV Werkzeuge is happy to advise 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40085-FDA Diameter: 8.5 mm Tip angle: 118° Type: Type N Execution: short Spiral length: 75 mm Overall length: 117 mm Material: HSS Application: Drills for metal For drill machine: Drilling Machine / Handheld Drilling Machine Colour: black Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N be used on? The MetavCUT Twist Drill Type N is designed primarily for metalworking and is suitable for alloyed and unalloyed Steel, Cast Iron and many Non‑Ferrous Metals; it also performs on certain Plastics when appropriate speeds and feeds are used. Is the MetavCUT Twist Drill compatible with handheld drilling machines? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank can be used in handheld Drilling Machines; ensure secure clamping, correct speed and steady feed to avoid runout and to maintain hole quality. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger bore diameters. It is easy to re‑grind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which 3 drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip, which lowers friction and the required feed forces; sharpening also improves centring of the drill in the workpiece, leading to cleaner, more accurate holes. Can a Twist Drill be used to drill wood? A Metal Drill such as this Twist Drill can be used in Wood, but guidance and finish are generally inferior compared to wood‑specific drills. Metal drills are easier to re‑sharpen and have less self‑pulling action. At which drilling depths is the Twist Drill the most used tool? For solid drilling, the Twist Drill is the most common choice. It is widely used for diameters up to 20 mm and drilling depths up to 100 mm, providing an efficient method for bore production in solid workpieces.

Spiralbohrer 8,5 mm (Typ N) – HSS‑E, 5% Kobaltlegiert, kurz, 135°, DIN 338, geschliffen Der Spiralbohrer 8,5 mm ist ein kurzer, geschliffener HSS‑E Bohrer für präzise Metallarbeiten an stationären und handgeführten Maschinen. HSS‑E mit 5% Kobaltlegierung für höhere Warmfestigkeit Kurze Ausführung für maximale Stabilität beim Bohren Spitzenwinkel 135° reduziert Ausbrechen in harten Werkstoffen Geschliffen nach DIN 338 für sehr genaue Bohrbilder Geeignet für Handbohrmaschine und allgemeine Metallbearbeitung Höhere Standzeit durch Legierung und Materialqualität Dank HSS‑E mit 5% Kobaltlegierung bietet dieser Bohrer eine verbesserte Warmfestigkeit und Verschleißfestigkeit gegenüber einfachen Schnellarbeitsstählen. Dadurch bleibt die Schneidkante bei höheren Schnitttemperaturen stabil, was insbesondere beim Bohren in legierten Stählen und Edelstahl von Vorteil ist. Die Materialwahl reduziert Ausbrüche und verlängert die Nutzungsdauer, sodass weniger Werkzeugwechsel erforderlich ist. Stabilität und Präzision durch kurze Bauform Die kurze Ausführung verringert die Auskraglänge und sorgt für deutlich reduzierte Vibrationen und Verbiegeanfälligkeit. Diese Bauweise ermöglicht präzisere Bohrungen und eine bessere Führung, besonders wenn mit handgeführten Akkubohrschraubern oder kleineren Bohrmaschinen gearbeitet wird. Anwender profitieren von geraden Bohrungen und geringerer Rüstzeit beim Einspannen. Feinster Schnitt dank geschliffener Spiralgeometrie und 135° Spitze Die geschliffene Schaft‑ und Schneidgeometrie sorgt für scharfe Kanten und hohen Rundlauf, was saubere Bohrlöcher in Metall begünstigt. Der 135° Spitzenwinkel reduziert das Wandern beim Anbohren und optimiert die Spanbildung in harten Werkstoffen. Für Anwender bedeutet das weniger Nacharbeit und konsistente Bohrbildqualität bei Serien- und Einzelteilen. Einsatzempfehlung und richtige Anwendung für saubere Ergebnisse Dieser Bohrer ist ideal für allgemeine Metallbearbeitung in Werkstatt und Montage. Bei Durchmesser 8,5 mm empfiehlt sich das Anpunkten mit einem Zentrierbohrer, um absolute Präzision zu erreichen. Kühlung und geeignete Schnittzahlen verlängern die Standzeit; bei stationärem Einsatz sind niedrige Vorschubraten und konstante Spülung vorteilhaft. Das Werkzeug ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe geeignet. Empfehlung: Den MetavCUT Standard Line Spiralbohrer für präzise Metallbohrungen wählen; bei Fragen zur Auswahl oder Anwendung kostenlose Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 47085-FDA Typ: Typ N (Normalspirale) Material: HSS‑E (Schnellarbeitsstahl, kobaltlegiert) Legierung: 5% Kobaltlegiert Ausführung: kurz Schaft Ausführung: geschliffen Norm: DIN 338 Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall, geeignet für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer 8,5 mm von MetavCUT für Edelstahl geeignet? Der Spiralbohrer 8,5 mm von MetavCUT (Typ N) ist durch die HSS‑E Legierung mit 5% Kobalt für bearbeitung von härteren Werkstoffen wie Edelstahl grundsätzlich geeignet; empfohlene Maßnahme ist die Verwendung von geeigneter Kühlung und angepasster Schnittgeschwindigkeit. Kann der MetavCUT Spiralbohrer 8,5 mm in einer Handbohrmaschine eingesetzt werden? Ja, der MetavCUT Spiralbohrer 8,5 mm wurde für den Einsatz an Handbohrmaschinen und ähnlichen handgeführten Geräten ausgelegt, wobei die kurze Ausführung die Stabilität verbessert und Verbiegen reduziert. Warum ist der Spitzenwinkel 135° beim Spiralbohrer 8,5 mm vorteilhaft? Der 135° Spitzenwinkel des Spiralbohrers 8,5 mm von MetavCUT reduziert das Wandern beim Anbohren und eignet sich besonders für härtere Materialien, wodurch sauberere Einbohrvorgänge und bessere Spanabfuhr erreicht werden. Ist der geschliffene Schaft beim MetavCUT Spiralbohrer 8,5 mm besser als rollgewalzte Ausführung? Die geschliffene Ausführung des MetavCUT Spiralbohrers 8,5 mm bietet sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzise Bohrbilder liefert; im Gegenzug ist bei stationärer Nutzung auf Kühlung und vorsichtigen Umgang zu achten, um Bruchrisiken zu minimieren. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#47085-FDA","sku":"47085-FDA","mpn":"47085-FDA","name":"Spiralbohrer 8,5 mm (Typ N) – HSS‑E, 5% Kobaltlegiert, kurz, 135°, DIN 338","description":"Kurz ausgeführter, geschliffener HSS‑E Spiralbohrer mit 5% Kobaltlegierung, 8,5 mm Durchmesser, 135° Spitzenwinkel, Typ N (Normalspirale), geeignet für Metallbearbeitung an Handbohrmaschinen und stationären Maschinen; hohe Warmfestigkeit und Standzeit; geschliffener Schaft für präzise Bohrbilder; DIN 338 konform.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Kurze Ausführung für mehr Stabilität"},{"@type":"Thing","name":"Anwendung: Bohrer für Metall"}],"mentions":[{"@type":"Thing","name":"DIN 338 Norm"},{"@type":"Thing","name":"HSS‑E mit 5% Kobaltlegierung"},{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"Spitzenwinkel 135°"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Geeignet für Handbohrmaschine"}],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe / Legierung","value":"5% Kobaltlegiert"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS‑E"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall, geeignet für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Preis Netto","value":"8.16 EUR"}],"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"dateModified":"2026-05-04T12:00:00+01:00"},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer 8,5 mm von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 8,5 mm (MetavCUT, Typ N) ist durch die HSS‑E Legierung mit 5% Kobalt grundsätzlich für die Bearbeitung von Edelstahl geeignet; empfohlen werden geeignete Kühlung und angepasste Schnittgeschwindigkeiten."}},{"@type":"Question","name":"Kann der MetavCUT Spiralbohrer 8,5 mm in einer Handbohrmaschine eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer 8,5 mm wurde für den Einsatz an Handbohrmaschinen und ähnlichen handgeführten Geräten entwickelt; die kurze Ausführung erhöht die Stabilität und reduziert Verbiegen."}},{"@type":"Question","name":"Warum ist der Spitzenwinkel 135° beim Spiralbohrer 8,5 mm vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel des Spiralbohrers 8,5 mm verbessert das Anbohrverhalten in harten Werkstoffen, reduziert Wandern beim Anbohren und fördert eine bessere Spanbildung."}},{"@type":"Question","name":"Ist der geschliffene Schaft beim MetavCUT Spiralbohrer 8,5 mm besser als rollgewalzte Ausführung?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Ausführung des MetavCUT Spiralbohrers 8,5 mm bietet sehr scharfe Kanten und hohe Rundlaufgenauigkeit für präzise Bohrbilder; im stationären Einsatz sollte auf Kühlung und vorsichtigen Umgang geachtet werden, da geschliffene Bohrer tendenziell spröder sein können."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-8-5-typ-n-hss-e-5prozent-kobalt-kurz-135-din-338-geschliffen","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"HSS‑E Werkzeugschaft"},{"@type":"Thing","name":"Anwendung Metallbearbeitung"}],"mentions":[{"@type":"Thing","name":"MetavCUT Standard Line"},{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"5% Kobaltlegierung"}]}]}

Spiralbohrer HSS‑G 8,5 mm, Spitzenwinkel 135°, extra lang, blank, DIN 1869 von MetavCUT Der Spiralbohrer ist ein extra langer HSS‑G‑Bohrer für tiefe Metallbohrungen, geeignet für legierte und unlegierte Stähle sowie Gusswerkstoffe. HSS‑G geschliffener Bohrer für Metall extra lange Ausführung für tiefe Bohrungen Spitzenwinkel 135° für härtere Werkstoffe DIN 1869 Tieflochspirale für effiziente Spanabfuhr Geeignet für Handbohrmaschine und stationäre Maschinennutzung Schnelleres Bohren bei geringerem Kraftaufwand Der geschliffene HSS‑G‑Schliff sorgt für sehr scharfe Schneiden, die ein bis zu 40 % schnelleres Bohren ermöglichen und zugleich 50 % weniger Anpresskraft erfordern. Dieser Vorteil reduziert Ermüdung bei wiederholten Bohrvorgängen und erhöht die Effizienz in der Werkstatt. Anwender profitieren von kürzeren Bearbeitungszeiten und weniger Nachbearbeitung, besonders bei Serienarbeiten und längeren Bohrzyklen. Präzise Bohrbilder und saubere Spanabfuhr bei harten Werkstoffen Mit einem Spitzenwinkel 135° dringt der Bohrer leichter in härtere Werkstoffe ein und vermeidet Aufplatzen an der Einlaufkante. Die DIN 1869‑Tieflochspirale unterstützt die Spanabfuhr auch bei extra tiefen Löchern, was saubere, maßhaltige Bohrbilder fördert. Bei geschliffenen Schneiden entsteht eine höhere Rundlaufgenauigkeit; der Begriff geschliffen bedeutet hier, dass die Geometrie durch CNC‑Schleifen erzeugt wurde und nicht durch Walzen. Entwickelt für tiefe Bohrungen und schwer erreichbare Stellen Die extra lang ausgeführte Bauform mit einer Gesamtlänge von 240 mm und einer Spirallänge von 165 mm ermöglicht das Erreichen tiefer Bohrstellen ohne Zwischenaufbohren. Diese Länge ist besonders sinnvoll bei tieferen Durchführungen oder wenn die Aufnahme weit vom Werkstück entfernt liegt. Bei sehr tiefen Löchern empfiehlt sich das stufenweise Bohren und regelmäßiges Entfernen der Späne, um Verstopfungen zu vermeiden. Empfohlenes Einsatzspektrum und Werkstoffverträglichkeit Der Bohrer eignet sich ausdrücklich für legierte und unlegierte Stahlarten, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Für Edelstahl oder hochlegierte Werkstoffe ist die Kombination aus angepasster Schnittgeschwindigkeit und Kühlung entscheidend. Bei stationärer Anwendung mit Kühlschmierstoff erhöht sich die Standzeit; in Handbetrieb sind moderate Drehzahlen und kontrollierter Vorschub ratsam. Sicherheit, Handhabung und Pflege für längere Lebensdauer Für eine sichere Anwendung empfiehlt sich eine Anbohrung zur Zentrierung bei anspruchsvollen Passungen, regelmäßige Kühlung und das Vermeiden von seitlicher Belastung, da geschliffene Werkzeuge empfindlicher gegenüber Kippbelastungen sind. Bei richtiger Anwendung trägt die präzise Geometrie zu weniger Gratbildung und geringerer Nachbearbeitung bei. Der Bohrer ist besonders für stehende Maschinensysteme und kraftvolle Akkubohrschrauber mit stabiler Aufnahme prädestiniert. Vertrauen Sie auf die Präzision der MetavCUT Standard Line mit HSS‑G und DIN 1869; für fachliche Beratung und technische Fragen steht METAV Werkzeuge gern zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 32085-FDA Durchmesser: 8,5 mm Material: HSS‑G Spitzenwinkel: 135° Ausführung: extra lang Farbe: blank Gesamtlänge: 240 mm Spirallänge: 165 mm Schaft Ausführung: geschliffen Norm: DIN 1869 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (HSS‑G Bohrer) kann für Edelstahl eingesetzt werden, empfiehlt aber eine angepasste Schnittgeschwindigkeit und konsequente Kühlung, damit die Standzeit erhalten bleibt. Kann ich den Spiralbohrer von MetavCUT in einer Handbohrmaschine verwenden? Der Spiralbohrer von MetavCUT ist für die Nutzung mit einer Handbohrmaschine geeignet, solange die Maschine ausreichend Leistung liefert und Kippbelastungen vermieden werden. Warum ist die Ausführung „extra lang“ bei diesem Spiralbohrer wichtig? Die extra lange Ausführung des Spiralbohrers von MetavCUT erlaubt das Erreichen tiefer Bohrstellen ohne Zwischenaufbohren und erleichtert Bohrungen an schwer zugänglichen Stellen. Wie unterscheiden sich geschliffene HSS‑G‑Bohrer wie dieser von gewalzten Bohrern? Geschliffene HSS‑G‑Bohrer von MetavCUT bieten schärfere Kanten und bessere Rundlaufgenauigkeit, sind jedoch empfindlicher gegen Kippbelastung und profitieren von stationärem Einsatz und Kühlung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#32085-FDA","sku":"32085-FDA","mpn":"32085-FDA","gtin13":"","name":"Spiralbohrer 8,5 mm HSS-G extra lang","description":"Extra langer Spiralbohrer HSS-G 8,5 mm, Spitzenwinkel 135°, geschliffen, blank, DIN 1869; entwickelt für tiefe Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen; bietet hohe Rundlaufgenauigkeit und effiziente Spanabfuhr durch Tieflochspirale.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,5 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"240 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"165 mm"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Vorteile","value":"Tieflochspirale nach DIN 1869 für effiziente Spanabfuhr; geschliffene Geometrie für hohe Rundlaufgenauigkeit"},{"@type":"PropertyValue","name":"Hinweis","value":"Für Edelstahl angepasste Schnittgeschwindigkeit und Kühlung empfehlen"},{"@type":"PropertyValue","name":"Preis Netto","value":"13.5 EUR"},{"@type":"PropertyValue","name":"uid","value":"32085-FDA"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT HSS-G 8,5 mm kann für Edelstahl eingesetzt werden; empfohlen werden jedoch angepasste Schnittgeschwindigkeit und konsequente Kühlung, um die Standzeit zu erhalten."}},{"@type":"Question","name":"Kann ich den Spiralbohrer von MetavCUT in einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT ist für die Nutzung mit einer Handbohrmaschine geeignet, sofern die Maschine ausreichend Leistung liefert und Kippbelastungen vermieden werden."}},{"@type":"Question","name":"Warum ist die Ausführung extra lang bei diesem Spiralbohrer wichtig?","acceptedAnswer":{"@type":"Answer","text":"Die extra lange Ausführung des Spiralbohrers von MetavCUT ermöglicht das Erreichen tiefer Bohrstellen ohne Zwischenaufbohren und erleichtert Arbeiten an schwer zugänglichen Stellen."}},{"@type":"Question","name":"Wie unterscheiden sich geschliffene HSS-G-Bohrer wie dieser von gewalzten Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Geschliffene HSS-G-Bohrer von MetavCUT haben sehr scharfe Kanten und bessere Rundlaufgenauigkeit, da die Geometrie CNC-geschliffen ist; sie sind jedoch empfindlicher gegen Kippbelastung und profitieren von stationärem Einsatz und Kühlung."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Tieflochspirale DIN 1869"},{"@type":"Thing","name":"HSS-G geschliffen"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"Tieflochspirale DIN 1869"},{"@type":"Thing","name":"Geschliffene Schaftausführung"},{"@type":"Thing","name":"Spitzenwinkel 135°"}]}]}

Twist Drill 8.5 mm HSS-G (Extra Long, 135°) — bright finished, fully ground, DIN 1869 by MetavCUT The Twist Drill 8.5 mm HSS-G is an extra-long metal drill designed for deep, high-precision holes in demanding materials for Drilling Machines. Extra-long length for deep, hard-to-reach holes HSS-G material for precise metal drilling 135° point angle for harder materials like stainless steel Fully ground shank for high concentricity DIN 1869 compliant with 305 mm overall length Outstanding Performance through Material and Geometry The extra-long HSS-G construction combines high cutting performance with improved hole quality. Thanks to the fully ground flute geometry, the bit achieves very sharp cutting edges and excellent run-out accuracy, which reduces wobble and delivers cleaner holes in alloys and cast materials. This design also means lower required feed force compared with roll-formed equivalents, so machining becomes more efficient and precise. Ideal for Deep and Difficult Metal Drilling Engineered specifically for deep drilling, the extended Spiral Length (210 mm) and Overall Length (305 mm) enable work in recessed or hard-to-reach areas where standard lengths fail. The 135° point angle reduces entry forces and improves centring in tougher metals, making the tool well suited for applications in alloyed and unalloyed steel, cast steel, cast iron and other non-ferrous metals. For production or repair work that demands depth and accuracy, this bit keeps processes reliable. Practical Machining Advice and Terminology Explained For safe and efficient use, employ appropriate coolant and moderate cutting speeds when machining harder alloys. The term HSS-G denotes High-Speed Steel, ground (HSS-G), meaning the flute geometry is ground rather than rolled—this yields sharper cutting edges and superior concentricity but can be more brittle, so stationary setups or rigid chucks and cooling are recommended. The 135° tip is chosen to shorten the initial boring time and to suit harder materials; a larger point angle typically reduces the tendency to grab and improves surface finish. Who Benefits Most from This Tool Production shops, tool rooms and maintenance teams facing deep-metal drilling tasks gain immediate advantages from the extra reach and precision. The bit is aimed at professionals who require consistent hole quality in challenging materials and those who value reduced rework. Its compliance with DIN 1869 ensures predictable performance in industrial environments, while the bright finished surface aids in chip evacuation and corrosion resistance during storage. MetavCUT recommends this extra-long HSS-G Twist Drill for demanding deep-hole metalwork; for technical advice or to confirm suitability for a specific application contact METAV Werkzeuge — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Precise Technical Specifications for Setup Designation: Twist Drill Marke: MetavCUT SKU: 33085-FDA Diameter: 8.5 mm Material: HSS-G Point Angle: 135° Overall Length: 305 mm Spiral Length: 210 mm Execution: extra long Finish/Colour: bright finished Shank Execution: fully ground Norm: DIN 1869 Model Series: Standard Line Application: Bohrer für Metall / Drills for metal For Drilling Machine: Handbohrmaschine / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT suitable for? The Twist Drill from MetavCUT (Twist Drill / Drill for Metal) is designed for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non-ferrous metals and hard plastics; its HSS-G composition and 135° tip support drilling in tougher metals with improved hole quality. How does the extra-long design affect drilling performance with the MetavCUT Twist Drill? An extra-long Twist Drill by MetavCUT lets operators reach recessed bores and deep workpieces that standard lengths cannot access; it maintains chip evacuation over longer depths but requires rigid fixturing and proper cooling to avoid breakage and to preserve concentricity. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high-strength materials and larger hole diameters; it is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks and deep-hole operations. Which three drill types exist? The three main drill types are Metal drills, Wood drills, and Masonry/Concrete drills.

Twist Drill (Drill for Metal) — 8.5 mm, 135° Point Angle, HSS‑G, Extra Long, Bright Finished, Fully Ground Shank, DIN 1869 The Twist Drill from MetavCUT is a precision Drill for Metal designed for deep, accurate holes in hard materials using a fully ground HSS‑G geometry. Extra long for deep and hard-to-reach holes HSS‑G ground design for clean, precise holes 135° point for easier entry in hard materials Fully ground shank for secure chuck grip Compliant with DIN 1869 for deep drilling High-precision geometry for cleaner holes and faster drilling The extra-sharp HSS‑G material and CNC-ground flute geometry deliver consistently precise results when machining steels and non-ferrous metals. This design produces sharp cutting edges and excellent roundness, which means cleaner holes and less rework. Thanks to the optimised geometry, users can achieve up to 40% faster drilling and require up to 50% less feed force compared with conventional HSS bits, reducing operator fatigue and machine load. Built for deep drilling — reliable chip evacuation and stability With an overall length of 390 mm and a spiral length of 265 mm, this Extra Long configuration is intended for deep bore applications where standard lengths fall short. The DIN 1869 specification and the deep-spiral flute aid in effective chip evacuation under extended cutting conditions, lowering the risk of clogging and improving hole quality in deep stacks or confined workpieces. Suitable for demanding metalworking tasks and machine setups The MetavCUT Twist Drill is targeted at machinists, toolroom technicians and maintenance professionals who require robust performance in legated and unlegated steels, cast iron and hard plastics. The Fully Ground Shank ensures accurate clamping and concentricity in chucks and toolholders, while the bright finished surface supports smooth insertion and corrosion resistance during storage. Best practices for longevity and performance To maximise life and performance, operate the bit with appropriate speeds and feeds for the specific metal and use coolant or cutting lubrication for sustained duty cycles; this is especially important given the ground geometry’s brittleness compared with rolled designs. The 135° point angle reduces walking and shortens piercing time in harder alloys such as stainless steel. For optimal results, prefer stationary or well-supported drilling setups and avoid abrupt lateral loads. MetavCUT recommends this Twist Drill for deep, precise metalworking tasks — for tailored technical advice or application support contact METAV Werkzeuge by e-mail at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Designation: Twist Drill Marke: MetavCUT SKU: 34085-FDA Diameter: 8.5 mm Point Angle: 135° Execution: Extra Long Finish/Colour: Bright Finished Material: HSS‑G Standard: DIN 1869 Spiral Length: 265 mm Overall Length: 390 mm Shank Execution: Fully Ground Application: Drills for Metal Model Series: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (Drill for Metal) is primarily used for machining high-strength materials and larger diameters where durability and precision are required. Its ground HSS‑G geometry is well suited to drilling in alloyed and unalloyed steels, cast iron and hard plastics, and it performs reliably in deep-hole situations. Which three drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is designed specifically for metalworking applications. What is a Twist Drill used for? A Twist Drill is mainly applied when working with high‑strength materials and larger bore diameters. Its ground form allows precise sharpening, and it withstands higher loads, making it suitable for drilling alloys, cast steels and hard plastics.

Twist Drill — Short Type N, Ø 8.5 mm, 135° Point, HSS‑G, Bright Finished, DIN 338 (MetavCUT) The Twist Drill Short Type N is a precision metalworking Drill for Drilling Machines, engineered for stable, fast and clean holes in hard materials. Short design for increased Stability and Precision HSS‑G material for clean holes in Metal 135° Point angle for harder Werkstoffe Fully ground Shank for low Runout Conforms to DIN 338 for standardized Reliability Faster, more stable drilling in metal workshops Die kurze Bauform des Werkzeugs erhöht die Stabilität und reduziert Schwingungen deutlich, sodass präzise Bohrungen auch bei hohen Schnittkräften möglich sind. Durch die HSS‑G Fertigung entstehen sehr scharfe Schneiden, die saubere Bohrbilder liefern und damit Nacharbeit minimieren. Diese Eigenschaft macht das Werkzeug besonders geeignet für anspruchsvolle Metallarbeiten wie in Maschinenbau und Feinwerkstatt. High performance on hard materials with reduced feed force Der 135° Point sorgt für besseren Anbohrverlauf in harten Werkstoffen und vermindert das Anfressen. Typ‑N‑Spiralgeometrie kombiniert mit geschliffener Oberfläche erlaubt bis zu 40% schnellere Bohrfortschritte bei gleichzeitig bis zu 50% reduzierter Anpresskraft, was die Produktivität erhöht und Ermüdung des Werkzeuges verringert. Ideal für legierte und unlegierte Stähle sowie Gusswerkstoffe. Compatibility and accuracy for drilling machines Die Ausführung als kurzer Spiralbohrer mit zylindrischem Schaft und fully ground Schaftoberfläche gewährleistet geringen Rundlauf und präzise Werkzeugführung in stationären und handgeführten Bohrmaschinen. Die Einhaltung der DIN 338 macht die Auswahl und Austauschbarkeit planbar und sorgt für reproduzierbare Ergebnisse in Serienprozessen. Who benefits: workshops, toolrooms and production Dieses Werkzeug ist konzipiert für Metallbearbeiter, Instandhalter und Produktionsstätten, die präzise, saubere Bohrungen in harten Materialien benötigen. Die Kombination aus Kurzbauweise, HSS‑G Material und Normkonformität bietet sich an, wenn Wiederholgenauigkeit und kurze Bearbeitungszeiten im Vordergrund stehen. METAVCUT‑Qualität unterstützt professionelle Anforderungen. Strong recommendation: Choose the MetavCUT Short Twist Drill for reliable, high‑precision metal drilling — for technical advice and support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Precise Technical Data for Planning and Procurement Designation: Twist Drill, Short, Type N, Diameter 8.5 mm Marke: MetavCUT SKU: 45085-FDA Diameter: 8.5 mm Overall Length: 117 mm Spiral Length: 75 mm Point Angle: 135° Material: HSS‑G Shank: Fully ground Finish: Bright finished For Drill Machine: Drilling Machine Norm: DIN 338 Execution: short Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Short Type N is primarily used for machining high‑strength materials and larger hole diameters; it excels in Metal such as alloyed and unalloyed Steel, Cast Steel, Cast Iron and Non‑ferrous Metals, delivering clean holes and high repeatability. Which three drill types exist? Common categories are Metal Drills (such as the MetavCUT Twist Drill), Wood Drills and Stone/Concrete Drills, each optimised in geometry and material for their specific workpiece classes. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑edge at the Drill Tip, lowering friction so that smaller Feed Forces are required and improving centring of the Tip in the Workpiece for more accurate starts. Can a Twist Drill be used for wood drilling? A Metal Twist Drill can be used in Wood, but guidance and Hole Finish are typically inferior compared with dedicated Wood Drills. Metal Drills are easier to resharpen and have lower self‑feeding tendency.

Spiralbohrer kurz Ø 8,5 mm · 135° · Typ N · TIN-beschichtet · HSS‑G · DIN 338 · MetavCUT Der Spiralbohrer von MetavCUT in kurzer Ausführung ist ein präziser Metallbohrer für stationäre und handgeführte Anwendungen, speziell geeignet für legierten und unlegierten Stahl sowie Nichteisenmetalle. HSS-G geschliffen für saubere Bohrlöcher TIN-Beschichtung reduziert Reibung und Verschleiß 135° Spitzenwinkel für härtere Werkstoffe Kurze Ausführung erhöht Stabilität und Genauigkeit DIN 338 konform gefertigt Präzise Führung und höhere Standzeit durch kurze Bauform Die kurze Ausführung reduziert die Auskraglänge und sorgt für deutlich geringere Verformung und weniger Vibrationen beim Bohren. Dies führt zu gleichmäßigeren Bohrlöchern und längerer Werkzeuglebensdauer, besonders bei harten Werkstoffen. Der Einsatz eines geschliffenen HSS-Rohlings (HSS-G) gewährleistet scharfe Schneiden und hohe Rundlaufgenauigkeit; deshalb eignet sich der Bohrer besonders für präzise Metallbearbeitung an Säulen- oder Tischbohrmaschinen. Erklärung: „geschliffen“ bedeutet, dass die Spiralgeometrie per CNC geschliffen wurde, was feinere Kanten als Rollwalzen erzeugt. Effizientes Arbeiten: schneller bohren, weniger Kraftaufwand Dank spezieller Schneidgeometrie ermöglicht der Bohrer ein bis zu 40 % schnelleres Bohren und benötigt dabei ungefähr 50 % weniger Anpresskraft als herkömmliche HSS-Varianten. Das Ergebnis ist ein spürbarer Zeitgewinn bei Serien- und Einzelteilen sowie geringere Belastung für Motoren und Bediener. Der Typ N mit Normalspirale bietet dabei einen guten Kompromiss zwischen Spanabfuhr und Zentrierverhalten für typische Metallarbeiten. Vielseitige Einsatzgebiete und empfohlene Arbeitsweise Mit einem Durchmesser von 8,5 mm fällt dieses Werkzeug in den Standard-Bereich und ist ideal für Werkstatt, Montage und DIY-Projekte an Stahl, Guss, Kupfer und Hartkunststoff. Für handgeführte Maschinen empfiehlt sich vor dem Bohren das Anpunkten mit einem Zentrierbohrer, um „Wandern“ zu vermeiden. Bei zähen oder warmleitenden Materialien wird die Nutzung eines Kühlschmierstoffs empfohlen, da die TIN-Beschichtung Reibung reduziert, Kühlung aber zusätzlich die Standzeit erhöht. Normkonforme Fertigung und Hinweise zur Auswahl Die Fertigung nach DIN 338 garantiert einheitliche Abmessungen und Kompatibilität mit Zylinderschaft-Aufnahmen. Geschliffene Ausführungen bieten hohe Präzision, sollten aber bevorzugt stationär und mit Kühlung eingesetzt werden, um Bruchrisiken zu minimieren. Bei Unsicherheiten zur Auswahl des passenden Bohrers für spezielle Materialien oder Maschinen stehen die Fachberater von METAV Werkzeuge zur Verfügung und helfen bei technischen Fragen weiter. Für zuverlässige und langlebige Metallbohrungen empfiehlt sich der MetavCUT Spiralbohrer der Standard Line mit TIN‑Beschichtung; bei technischen Fragen hilft METAV Werkzeuge gern unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 weiter Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 46085-FDA Durchmesser: 8,5 mm Spitzenwinkel: 135° Typ: Typ N Farbe / Oberfläche: TIN-beschichtet Ausführung: kurz Material: HSS-G Schaftausführung: geschliffen Spirallänge: 75 mm Gesamtlänge: 117 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Norm: DIN 338 Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der MetavCUT Spiralbohrer geeignet? Der MetavCUT Spiralbohrer (Typ N, HSS‑G, TIN‑beschichtet) eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze; bei Hartkunststoff ist ebenfalls Einsatz möglich. Ist der Spiralbohrer für Handbohrmaschinen geeignet? Ja, der MetavCUT Spiralbohrer in kurzer Ausführung wurde für den Einsatz an Handbohrmaschinen und stationären Maschinen entwickelt; für beste Ergebnisse empfiehlt sich korrektes Anpunkten und ggf. Kühlung. Wann ist die TIN‑Beschichtung vorteilhaft? Die TIN‑Beschichtung des MetavCUT Spiralbohrers reduziert Reibung und Verschleiß besonders bei metallischer Bearbeitung, was die Standzeit erhöht und die Wärmeentwicklung beim Bohren mindert. Wie unterscheidet sich ein geschliffener HSS‑Bohrer von einem rollgewalzten? Ein geschliffener HSS‑Bohrer wie bei diesem MetavCUT Produkt bietet schärfere Kanten und höhere Rundlaufgenauigkeit, eignet sich daher besonders für präzise Metallbohrungen; er kann jedoch spröder sein und sollte mit Kühlung und stationärer Aufnahme verwendet werden. Brauche ich technische Beratung zur Auswahl des richtigen Bohrers? Sollte Unsicherheit bestehen, ob der MetavCUT Spiralbohrer die Anforderungen erfüllt oder eine alternative Ausführung besser passt, bietet METAV Werkzeuge kompetente Beratung per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#46085-FDA","sku":"46085-FDA","mpn":"46085-FDA","name":"Spiralbohrer 46085-FDA","description":"Kurz ausgeführter Spiralbohrer Ø 8,5 mm, 135° Spitzenwinkel, Typ N, TIN-beschichtet, HSS-G, geschliffener Schaft, DIN 338 konform; ideal für präzise Metallbohrungen in legierten und unlegierten Stählen sowie Nichteisenmetallen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"46085-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe / Oberfläche","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"5"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der MetavCUT Spiralbohrer geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer (Typ N, HSS-G, TIN-beschichtet) eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze; bei Hartkunststoff ist ebenfalls Einsatz möglich."}},{"@type":"Question","name":"Ist der Spiralbohrer für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer in kurzer Ausführung wurde für den Einsatz an Handbohrmaschinen und stationären Maschinen entwickelt; für beste Ergebnisse empfiehlt sich korrektes Anpunkten und gegebenenfalls Kühlung."}},{"@type":"Question","name":"Wann ist die TIN-Beschichtung vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Die TIN-Beschichtung reduziert Reibung und Verschleiß besonders bei metallischer Bearbeitung, erhöht die Standzeit und mindert die Wärmeentwicklung beim Bohren."}},{"@type":"Question","name":"Wie unterscheidet sich ein geschliffener HSS-Bohrer von einem rollgewalzten?","acceptedAnswer":{"@type":"Answer","text":"Ein geschliffener HSS-Bohrer bietet schärfere Kanten und höhere Rundlaufgenauigkeit und eignet sich daher besonders für präzise Metallbohrungen; er kann jedoch spröder sein und sollte mit Kühlung und stationärer Aufnahme verwendet werden."}},{"@type":"Question","name":"Brauche ich technische Beratung zur Auswahl des richtigen Bohrers?","acceptedAnswer":{"@type":"Answer","text":"Bei Unsicherheit bietet METAV Werkzeuge kompetente Beratung per E-Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 an."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/product/46085-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Kurzbauform für präzise Metallbohrungen"},{"@type":"Thing","name":"DIN 338 konforme HSS-G Bohrer"}],"mentions":[{"@type":"Thing","name":"TIN-Beschichtung (Titan-Nitrid)"},{"@type":"Thing","name":"Geschliffener Schaft (HSS-G)"},{"@type":"Thing","name":"Einsatz an Hand- und stationären Bohrmaschinen"}]}]}

Spiralbohrer — Bohrer für Metall HSS-G, Ø 8,5 mm, Spitzenwinkel 135°, lang, geschliffen, blank, DIN 340 (MetavCUT) Der Spiralbohrer ist ein langer HSS‑G‑Bohrer für präzise Metallbohrungen in Werkstatt und Montage und eignet sich besonders für tiefere Bohrungen und schwer zugängliche Stellen. Lange Ausführung nach DIN 340 für tiefe Bohrungen HSS‑G geschliffen für präzise, saubere Bohrlöcher Spitzenwinkel 135° ideal für härtere Werkstoffe Spirallänge 109 mm für besseres Spänefördern Geeignet für Handbohrmaschine und Werkstattbetrieb Hochleistungs‑Material für konstante Präzision Der Spiralbohrer aus HSS‑G verbindet Härte und Schärfe für saubere Bohrbilder in legierten und unlegierten Stählen sowie Gusswerkstoffen. Die geschliffene Schaft‑Ausführung sorgt für hohe Rundlaufgenauigkeit, wodurch die Bohrlöcher Maßhaltigkeit behalten. Dank der langen Ausführung nach DIN 340 lassen sich tiefe Bohrungen an schwer zugänglichen Stellen durchführen, ohne auf Stabilität verzichten zu müssen. Effiziente Bohrleistung und Anwendungsempfehlungen Der geschliffene HSS‑Bohrer ermöglicht bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Spiralbohrern, was Zeit und Kraft spart. Der Spitzenwinkel 135° reduziert das Auslaufen bei harten Werkstoffen und erleichtert das Anbohren. Bei stationärem Einsatz oder mit Kühlschmierstoff erzielt der Bohrer die beste Standzeit; bei Handbetrieb empfiehlt sich ein zentrierender Anbohrer für höchste Präzision. Spezielle Vorteile der langen Ausführung Mit einer Spirallänge von 109 mm und einer Gesamtlänge von 165 mm eignet sich dieser Bohrer besonders für Bohrbuchsen, tiefere Sacklöcher und schwer zugängliche Bereiche. Die längere Spirale fördert Späne zuverlässig ab und verringert so Verklebungen im Bohrloch. Diese Eigenschaft macht den Bohrer zur guten Wahl für längere Arbeitszyklen in Werkstatt und Montage. Anwenderkreis, Einsatzbereiche und Hinweise Der Spiralbohrer richtet sich an Profi‑Handwerker, Maschinenbauer und ambitionierte Heimwerker, die regelmäßig Metall bearbeiten. Er wurde speziell für Arbeiten in legierten und unlegierten Stahl, Temperguss, Grauguss und Nichteisenmetallen entwickelt. Nicht empfohlen ist der Einsatz ohne Kühlung bei sehr zähen Materialien oder bei extrem kleinen Durchmessern in handgeführten Maschinen, da die Stabilität dann kritisch wird. Empfehlung: Setzen Sie auf die MetavCUT Standard Line für dauerhafte Präzision bei tiefen Metallbohrungen; für individuelle Beratung steht Metav Werkzeuge gerne per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 zur Verfügung Technische Daten auf einen Blick Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 53085-FDA Material: HSS-G Norm: DIN 340 Ausführung: lang Schaft-Ausführung: geschliffen Durchmesser: 8,5 mm Spirallänge: 109 mm Gesamtlänge: 165 mm Spitzenwinkel: 135° Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was macht den Spiralbohrer von MetavCUT für Metall besonders geeignet? Der Spiralbohrer von MetavCUT als Bohrer für Metall kombiniert HSS‑G‑Qualität mit geschliffener Geometrie und langer Ausführung, was präzise, tiefe Bohrungen und gutes Spänefördern ermöglicht. Kann der Spiralbohrer für Handbohrmaschinen verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz in Handbohrmaschine geeignet, wobei bei anspruchsvolleren Werkstoffen ein zentrierender Anbohrer und Kühlschmierstoff empfohlen werden. Für welche Materialien ist der Spiralbohrer laut Datenblatt freigegeben? Der Spiralbohrer (MetavCUT Standard Line) ist ausgelegt für legierte und unlegierte Stähle, Temperguss, Grauguss, Sphäroguss, Sintereisen sowie Nichteisenmetalle und harte Kunststoffe. Wie verhalte ich mich bei tiefen Bohrungen mit dem Spiralbohrer? Bei tiefen Bohrungen mit dem Spiralbohrer von MetavCUT empfiehlt sich schrittweises Vorschieben, ausreichende Kühlung und gegebenenfalls eine stationäre Aufnahme, um Bruchrisiken zu minimieren. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#53085-FDA","sku":"53085-FDA","mpn":"53085-FDA","name":"Spiralbohrer 8,5 mm HSS-G lang DIN 340 blank geschliffen","description":"Langer Spiralbohrer aus HSS-G, Ø 8,5 mm, Spitzenwinkel 135°, Spirallänge 109 mm, Gesamtlänge 165 mm; geschliffene Schaft‑Ausführung nach DIN 340 für tiefe Metallbohrungen; geeignet für legierte und unlegierte Stähle, Gusswerkstoffe und Nichteisenmetalle; ideal für Werkstatt und Montage.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,5 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Norm","value":"DIN 340"},{"@type":"PropertyValue","name":"Ausführung","value":"lang"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"109 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"165 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wofür eignet sich der Spiralbohrer 8,5 mm HSS-G lang?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 8,5 mm HSS-G lang von MetavCUT eignet sich für tiefe Bohrungen in legierten und unlegierten Stählen, Gusswerkstoffen sowie Nichteisenmetallen und ist für Werkstatt und Montage konzipiert."}},{"@type":"Question","name":"Welche Vorteile bietet die geschliffene Schaft‑Ausführung beim Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Schaft‑Ausführung des Spiralbohrers HSS-G sorgt für hohe Rundlaufgenauigkeit, scharfe Schneiden und saubere, präzise Bohrlöcher, besonders vorteilhaft bei Metallbearbeitung."}},{"@type":"Question","name":"Warum ist der Spitzenwinkel 135° beim Spiralbohrer sinnvoll?","acceptedAnswer":{"@type":"Answer","text":"Der Spitzenwinkel 135° des Spiralbohrers reduziert das Auslaufen beim Anbohren harter Werkstoffe und erleichtert das Eindringen in Materialien wie Edelstahl; dadurch verbessert sich die Standzeit bei anspruchsvollen Anwendungen."}},{"@type":"Question","name":"Welche Länge und Spirallänge hat der Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT hat eine Spirallänge von 109 mm und eine Gesamtlänge von 165 mm, was ihn besonders geeignet für tiefe Sacklöcher und schwer zugängliche Bohrstellen macht."}},{"@type":"Question","name":"Kann der Spiralbohrer 8,5 mm HSS-G lang in Handbohrmaschinen verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 8,5 mm HSS-G lang ist für Handbohrmaschine geeignet; bei harten Werkstoffen empfiehlt sich jedoch ein zentrierender Anbohrer und Kühlung für optimale Stabilität und Standzeit."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/53085-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer"},{"@type":"Thing","name":"HSS-G Bohrer lange Ausführung"},{"@type":"Thing","name":"Bohrer für Metall"}],"mentions":[{"@type":"Thing","name":"DIN 340"},{"@type":"Thing","name":"Spirallänge 109 mm"},{"@type":"Thing","name":"Spitzenwinkel 135°"},{"@type":"Thing","name":"Geschliffener Schaft"}]}]}

Twist Drill — Type N, short HSS, Ø 8.6 mm, 118° tip, black, DIN 338 — MetavCUT The Twist Drill Type N short HSS is designed for precise metal drilling in hand and drilling machines, offering stability and clean starts for workshop and industrial use. Short HSS design for high stability Ø 8.6 mm for medium-diameter holes 118° tip for reliable centring on curved surfaces Type N normal spiral for metal drilling Conforms to DIN 338 for short twist drills Reliable HSS performance for demanding metalwork Manufactured from HSS (High Speed Steel), this Twist Drill targets the drilling of alloyed and unalloyed steel, cast iron and non‑ferrous Metals. The material choice provides a balanced combination of hardness and toughness, which supports sustained cutting performance under load. As a result, workshops benefit from consistent hole quality and extended tool life when processing common engineering materials. Short execution and Type N spiral for precision and stability The short design specified by DIN 338 reduces overhang and increases rigidity compared with longer variants, which minimises deflection and improves concentricity when drilling from chucks. The Type N normal spiral geometry is the classic solution for metal drilling, offering predictable chip evacuation and stable cutting behaviour in stationary and portable Drilling Machines. This leads to noticeably better guidance and fewer rejects in precision tasks. 118° tip for better centring and smoother starts A 118° tip provides a favourable compromise between easy centring and fast penetration for many common metals; the geometry supports accurate positioning even on slightly curved surfaces. Tip sharpening (outpointing) reduces the cross‑cutting edge width, which lowers friction and reduces necessary feed forces, improving centring and resulting hole finish. For operators this means quicker set‑up and fewer re‑drills while maintaining a clean bore. Practical advantages for workshops and maintenance teams The combination of HSS construction, short overall length and Type N spiral makes this Twist Drill particularly suitable for mechanical workshops, tool rooms and maintenance teams requiring reliable medium‑diameter holes. The geometry is also straightforward to resharpen, so machines with frequent use benefit from a tool that can be economically maintained. Its black finish improves visibility of wear and handling in busy production environments. Strong recommendation: Choose the MetavCUT Twist Drill Type N (Ø 8.6 mm, short HSS) for robust, precise metal drilling — for expert advice contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40086-FDA Type: Type N Diameter: 8.6 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand Drill Application: Drills for metal Norm: DIN 338 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N from MetavCUT used for? The MetavCUT Twist Drill Type N is primarily used for drilling in metal; its short HSS construction and normal spiral make it suitable for precise holes in Alloyed and Unalloyed Steel, Cast Iron and Non‑Ferrous Metals in both workshop and maintenance environments. Can the MetavCUT Twist Drill be used with a hand drill or drilling machine? Yes, the MetavCUT Twist Drill Type N is designed for use in Drilling Machines and can also be employed with Hand Drills, though the short execution particularly benefits stationary setups where rigidity and concentricity are crucial. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and larger drill diameters; its form is easy to grind and it withstands elevated loads, making it suitable for robust metalworking tasks. Which three drill types exist? The three common drill types are: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills sharpened (outpointed)? Sharpening reduces the cross‑cutting edge at the tip of the Twist Drill, which significantly lowers friction forces and thus requires less feed force; at the same time the tip centres better in the workpiece, improving accuracy. Can a metal Twist Drill be used to drill wood? A metal (HSS) Twist Drill can be used in wood but it generally provides poorer guidance and a less clean finish compared with dedicated wood drills; however, metal drills are easier to resharpen and show less self‑feeding behaviour.

Twist Drill – Short Twist Drill Type N, 8.6 mm, 135° Point Angle, 5% Cobalt‑Alloyed, Fully Ground, DIN 338, HSS‑E (MetavCUT) The Twist Drill is a short Type N drilling tool for precise metalworking in Drilling Machines, designed for high stability and clean bores in alloyed and unalloyed metals. Short HSS‑E Twist Drill for stable precision 8.6 mm Diameter with 135° Point Angle Fully ground shank for high runout accuracy Conforms to DIN 338 for short twist drills Higher Precision through Reduced Overhang for Consistent Holes Because of its short design the drill benefits from a reduced overhang, which significantly increases stability and reduces bending under load. This results in more consistent hole geometry and less vibration when working with tougher materials. For metalworkers who require repeatable results, the shorter flute length improves control and makes it easier to maintain concentricity even at higher spindle speeds. Material Composition and Grinding: Sharpness and Accuracy Manufactured from HSS‑E (High Speed Steel with 5% cobalt) and executed as fully ground, this twist drill delivers sharper Cutting Edges and excellent dimensional accuracy. The addition of cobalt increases hot hardness, improving wear resistance when drilling stainless or alloyed steels. Ground flutes offer superior Roundness and a cleaner finish compared with rolled alternatives, though users should consider appropriate cooling and tooling fixtures to mitigate fragility in highly loaded operations. Optimised Geometry for Harder Materials and Precise Entry The 135° Point Angle and Type N Normal Spiral geometry are selected to ease penetration into harder metals and to reduce Step‑in effects at the start of the hole. This geometry helps centre the tool and lowers the tendency to Skew on hard surfaces, making it suitable for stainless steel and tougher alloys encountered in workshop and industrial applications. Use of coolant and steady feeds will further extend tool life and hole quality. Suitable Uses and Target Users: Workshops and Professionals Engineered for use in Drilling Machines, this short twist drill is ideal for professional workshops, toolrooms and maintenance departments that prioritise accuracy over long reach. It is particularly effective when performing precision metal drilling tasks like mounting holes, component assembly, and repair work where straightness and roundness are critical. The product supports drilling in Alloyed Steel, Unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Plastics. Operational Tips and Durability Notes Adopt moderate spindle speeds and consistent coolant flow to exploit the 5% cobalt‑alloyed HSS‑E properties fully; this reduces the risk of thermal softening and tool wear. Because fully ground drills can be more brittle than rolled types, clamp the workpiece firmly and avoid excessive radial forces. For diameters below 6 mm the manufacturing process reduces breakage risk, but appropriate machine setup remains essential for long tool life. Strong recommendation: Choose the MetavCUT short HSS‑E Twist Drill for precise metal drilling — for technical questions or guidance METAV Werkzeuge provides expert support, contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill (Short, Type N, HSS‑E, 8.6 mm, 135°) Brand: MetavCUT SKU: 47086-FDA Diameter: 8.6 mm Point Angle: 135° Type: Type N Execution: Short Colour / Alloy: 5% cobalt-alloyed Shank Version: Fully ground Spiral Length: 81 mm Overall Length: 125 mm Application: Drills for Metal Material: HSS-E Standard: DIN 338 Suitable for Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill by MetavCUT (Type N)? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger bore diameters; its short form is easy to sharpen and endures higher loads, making it suitable for demanding metalworking tasks where durability and penetration into tough alloys are required. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Generally, the main drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill family and is optimised for metalworking with a Type N spiral and HSS‑E composition. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cutting edge at the point of the Twist Drill, lowering friction and therefore the necessary feed forces while improving centring of the tip in the workpiece for more accurate starts. Can a metal Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated Wood Drills; metal drills are easier to re‑grind and have less self‑pulling tendency.

Twist Drill (Spiralbohrer) — Ø 8.6 mm · 135° tip · Type N · Bright finished · Short · DIN 338 · HSS‑G · MetavCUT The Twist Drill is a short HSS‑G metal drill designed for precise drilling in hard materials on Drilling Machines. Short design for higher stability and precision Conforms to DIN 338 for short twist drills 135° tip optimised for hard materials Fully ground shank for high concentricity Up to 40% faster drilling with reduced feed force Deliver faster, cleaner holes with a short HSS‑G design The short Twist Drill construction reduces overhang and vibration, which directly improves stability and hole quality. Thanks to the HSS‑G (ground High Speed Steel) geometry, cutting edges are sharper and concentricity is higher than rolled alternatives, leading to more consistent hole diameters and less rework. The reduced tendency to wander makes this drill particularly effective when accuracy matters, for example when preparing holes for threaded fastenings in metal components. Precision at the tip: why 135° helps with hard materials A 135° tip angle increases the contact area at the point and reduces the initial penetration aggressiveness compared with steeper tips, which helps when drilling stainless steel, cast and alloyed steels or hard plastics. The Type N normal spiral is the classic metalworking geometry and provides reliable chip evacuation and centre guidance. In practice, this means fewer retries, reduced burr formation and a cleaner finish on the workpiece. Suitable machines and material range for consistent results This short Type N Twist Drill is intended for metalworking on rotating machines and is suitable for both stationary Drilling Machines and compatible portable setups when rigidity is ensured. It is recommended for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The fully ground shank ensures tight clamping and low runout, improving tool life and repeatability in production environments. Handling advice to maximise performance and tool life Ground HSS drills can be more brittle than rolled types; therefore, apply moderate feed and appropriate cutting fluid when machining metals to avoid premature breakage. Correct speed and steady feed are essential: slower speeds and continuous coolant are advised for harder alloys. For precise positioning, use a pilot or centre punch before drilling. If uncertain about speeds, feeds or machine setup, expert advice is available from METAV Werkzeuge to match operating conditions to material and hole requirements. Choose MetavCUT quality for precision metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 45086-FDA Diameter: 8.6 mm Tip Angle: 135° Type: Type N Execution: Short Finish/Colour: Bright finished Material: HSS‑G Spiral Length: 75 mm Overall Length: 117 mm Shank Finish: Fully ground Standard: DIN 338 Intended Use: Drills for metal For Machine: Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for drilling in hard and high‑strength materials; it is especially suited to metalworking tasks such as holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, where precision and stability are required. Which three drill types exist? The three main drill categories are Metal drill, Wood drill and Stone/Concrete drill; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for machining metals. Why are twist drills pointed? The point geometry reduces the cross‑cut area at the tip, lowering friction and required feed forces; by sharpening (pointing) a Twist Drill the cutting forces decrease and the tip centres more reliably in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but the guidance is inferior and the hole finish is usually less clean compared with dedicated Wood drills; however, metal Twist Drills are easier to resharpen and show less self‑pulling action.

Twist Drill — Type N, 8.75 mm, 118° point angle, short HSS, black, DIN 338 A Twist Drill Type N designed for precise metal drilling in drilling machines and hand drills. HSS short Twist Drill, DIN 338 compliant 8.75 mm Diameter with 118° point angle 125 mm Overall length for stable handling Type N normal spiral optimized for metal Black finish for improved surface protection Precision and durability for demanding metalworking This short HSS Twist Drill combines material toughness with a compact design to deliver reliable performance in metal applications. The HSS material provides high wear resistance and good elasticity, making the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short design reduces overhang and therefore vibration, which results in precise holes and a lower tendency to wander during drilling. Stability and handling that improve machining accuracy The reduced exposed length and 125 mm overall length increase stiffness and control when using a drilling machine or hand drill. The 81 mm flute length evacuates chips efficiently while maintaining rigidity, enabling consistent results in moderate deep holes. This combination supports clean hole geometry and repeatable centering, which is particularly important for workshop and maintenance tasks. Designed to the DIN 338 short‑drill standard for industrial use Manufactured to DIN 338, this short Twist Drill meets common shop standards for short spiral drills with cylindrical shank. The Type N normal spiral offers a reliable helix geometry for metal cutting, while the 118° point angle supports good centering behavior and is versatile across many metal types. For harder materials such as stainless steel, a steeper angle may be preferred, but the 118° point here balances penetration and chip formation for broad use. Practical guidance and safe working tips When working with this Twist Drill in metal, use appropriate spindle speeds and cutting fluid to extend tool life and improve surface finish. Start with lower speeds for larger diameters and increase coolant flow for heat management. Because the bit is a short version, it is less prone to bending — a benefit when precision is required. For occasional sharpening, the normal spiral geometry of this bit allows easier regrinding while retaining performance. Strong recommendation: the MetavCUT Twist Drill Type N is ideal for precision metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 400875-FDA Diameter: 8.75 mm Point angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Flute length: 81 mm Overall length: 125 mm Colour: black For drill: Drilling Machine / Hand Drill Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended for metalworking and is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics; its HSS composition provides the hardness and elasticity needed for these materials. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; its shape allows comparatively easy resharpening and it withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials adapted to their specific applications.

Spiralbohrer (kurz) HSS‑G 8,75 mm, 135° | Typ N | MetavCUT | DIN 338 Der Spiralbohrer kurz HSS‑G 8,75 mm ist ein präziser Metallbohrer für Handbohrmaschine und stationäre Maschinen, der durch kurze Ausführung Stabilität und hohe Bohrgeschwindigkeit bei harten Werkstoffen bietet. Hohe Stabilität durch kurze Ausführung Geschliffener HSS‑G Schaft für präzise Löcher 135° Spitze optimiert für harte Werkstoffe DIN 338 Klassifizierung für kurze Spiralbohrer Geringerer Kraftaufwand, bis zu 40 % schneller Schnellere, Saubere Bohrungen in Stahl Dank der HSS‑G geschliffenen Geometrie dringt der Bohrer sauber in legierten und unlegierten Stahl ein und reduziert das Ausweichen beim Anbohren. Die kurze Ausführung sorgt für eine geringere Auskraglänge, wodurch sich die Stabilität erhöht und Vibrationen minimiert werden. Durch die optimierte Schneidengeometrie sind bis zu 40 % schnellere Vorschübe möglich und es wird 50 % weniger Anpresskraft benötigt, was die Ermüdung des Anwenders reduziert und die Produktivität in Werkstatt und Produktion steigert. Geschliffene Geometrie für Präzision und Standzeit Die geschliffene Spannutengeometrie ermöglicht scharfe Schneidenkanten und hohe Rundlaufgenauigkeit, was saubere Bohrbilder und exakte Durchmesser gewährleistet. Als Typ N Normalspirale ist der Bohrer speziell auf Metallanwendungen ausgelegt; er empfiehlt sich besonders für Stahl, Guss und Nichteisenmetalle. Beachten Sie, dass geschliffene Ausführungen empfindlicher gegen Kerbwirkung sind; bei stationärem Einsatz mit Kühlschmierstoff wird die Standzeit deutlich erhöht. Vielseitiger Einsatz in Werkstatt und Montage Mit einem Durchmesser von 8,75 mm liegt der Bohrer im Standard‑Bereich und eignet sich somit für häufige Werkstatt‑ und Montageaufgaben. Die kurze Bauform macht den Einsatz sowohl in Handbohrmaschine als auch in Säulenbohrmaschinen praktikabel, insbesondere wenn Stabilität gefragt ist. Zur präzisen Positionierung empfiehlt sich vorheriges Anpunkten; für tiefe oder genaue Passungen ist ein Zentrierbohrer sinnvoll, um das Wandern beim Start zu vermeiden. Anwendungstipps für sichere und genaue Ergebnisse Für saubere Ergebnisse empfehlen sich mittlere Schnittgeschwindigkeiten, gezielte Kühlung und kurze Auszugbewegungen zur Spanabfuhr. Die Spirallänge 81 mm erlaubt sichere Spanleitung bei üblichen Bohrtiefen; bei tieferen Löchern ist mehrstufiges Aufbohren ratsam. Durch das Einhalten der DIN‑Empfehlungen und das Verwenden von Kühlschmierstoffen wird die Lebensdauer des Werkzeugs erhöht und das Bruchrisiko reduziert. Empfehlung: Der MetavCUT kurze Spiralbohrer HSS‑G 8,75 mm liefert präzise Metallbohrungen bei reduziertem Kraftaufwand — für persönliche Beratung und technische Fragen kontaktieren Sie METAV Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten und Herstellerangaben Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 450875-FDA Durchmesser: 8,75 mm Spitzenwinkel: 135° Typ: Typ N Ausführung: kurz Material: HSS‑G Norm: DIN 338 Schaft Ausführung: geschliffen Gesamtlänge: 125 mm Spirallänge: 81 mm Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Materialien kann ich mit dem Spiralbohrer MetavCUT Typ N bearbeiten? Der Spiralbohrer MetavCUT Typ N aus HSS‑G eignet sich insbesondere für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und harte Kunststoffe; für sehr harte oder gehärtete Stähle prüfen Sie bitte die passende Schnittgeschwindigkeit und Kühlung. Ist der Spiralbohrer MetavCUT HSS‑G 8,75 mm für Handbohrmaschine geeignet? Ja, der Spiralbohrer MetavCUT HSS‑G in kurzer Ausführung ist für Handbohrmaschine geeignet, die kurze Auskraglänge sorgt für mehr Stabilität; bei sehr feinen Anwendungen empfiehlt sich Anpunkten zur Zentrierung. Wann sollte ich bei dem Spiralbohrer MetavCUT Typ N Kühlschmierstoff einsetzen? Bei Bohrungen in Stahl und bei höherer Vorschubgeschwindigkeit erhöht Kühlschmierstoff die Standzeit des Spiralbohrers MetavCUT Typ N deutlich und reduziert das Bruchrisiko geschliffener Ausführungen. Wie vermeide ich Brüche mit dem Spiralbohrer MetavCUT 8,75 mm? Um Brüche zu vermeiden, den Spiralbohrer MetavCUT 8,75 mm mit moderater Vorschubkraft, geeigneter Drehzahl, regelmäßiger Spanabfuhr und ausreichender Kühlung betreiben; für tiefe Löcher mehrstufig aufbohren. Benötige ich eine spezielle Aufnahme für den geschliffenen Schaft des Spiralbohrers MetavCUT? Der geschliffene Zylinderschaft des Spiralbohrers MetavCUT passt in gängige Bohrfutter; bei stationären Maschinen auf festen Rundlauf und saubere Spannfutter achten. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem — wir stehen Ihnen gerne zur Verfügung. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#450875-FDA","sku":"450875-FDA","mpn":"450875-FDA","name":"Spiralbohrer 8,75 mm","description":"Kurzer Spiralbohrer HSS‑G 8,75 mm, 135° Spitzenwinkel, Typ N Normalspirale, geschliffener Zylinderschaft, Farbe blank, Ausführung kurz, Norm DIN 338; geeignet für Bohren in legierten und unlegierten Stahl, Guss, Nichteisenmetalle und harte Kunststoffe; hohe Stabilität durch kurze Auskraglänge und geschliffene Geometrie.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,75 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS‑G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"125 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"81 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"5"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Materialien kann ich mit dem Spiralbohrer MetavCUT Typ N bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT Typ N HSS‑G 8,75 mm eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und harte Kunststoffe; für sehr harte oder gehärtete Stähle sollten Schnittgeschwindigkeit und Kühlung angepasst werden."}},{"@type":"Question","name":"Ist der Spiralbohrer MetavCUT HSS‑G 8,75 mm für Handbohrmaschine geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurze Spiralbohrer MetavCUT HSS‑G 8,75 mm ist für Handbohrmaschine geeignet, die kurze Auskraglänge erhöht die Stabilität; zur genauen Positionierung empfiehlt sich vorheriges Anpunkten."}},{"@type":"Question","name":"Wann sollte ich bei dem Spiralbohrer MetavCUT Typ N Kühlschmierstoff einsetzen?","acceptedAnswer":{"@type":"Answer","text":"Bei Bohrungen in Stahl und bei höheren Vorschubgeschwindigkeiten erhöht Kühlschmierstoff die Standzeit des Spiralbohrers MetavCUT Typ N deutlich und reduziert das Bruchrisiko geschliffener Ausführungen."}},{"@type":"Question","name":"Wie vermeide ich Brüche mit dem Spiralbohrer MetavCUT 8,75 mm?","acceptedAnswer":{"@type":"Answer","text":"Um Brüche zu vermeiden, den Spiralbohrer MetavCUT 8,75 mm mit moderater Vorschubkraft, geeigneter Drehzahl, regelmäßiger Spanabfuhr und ausreichender Kühlung betreiben; bei tiefen Löchern mehrstufig aufbohren."}},{"@type":"Question","name":"Benötige ich eine spezielle Aufnahme für den geschliffenen Schaft des Spiralbohrers MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene Zylinderschaft des Spiralbohrers MetavCUT passt in gängige Bohrfutter; bei stationären Maschinen auf festen Rundlauf und saubere Spannfutter achten."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-8-75-mm","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"Kurzbohrer nach DIN 338"}],"mentions":[{"@type":"Thing","name":"MetavCUT Marke"},{"@type":"Thing","name":"HSS‑G geschliffener Schaft"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Kühlung empfohlen"}]}]}

Twist Drill Type N — 8.7 mm, 118° tip, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a short High Speed Steel drill bit designed for precise metal drilling with hand or drilling machines. Short design for increased stability and precision HSS material for metalworking durability 8.7 mm diameter for standard metal holes 118° tip angle for reliable centring Conforms to DIN 338 short twist drill specification Reliable rigidity for precision metalworking A short HSS twist drill with a Type N spiral offers clear benefits where accuracy matters. The reduced overhang and the 81 mm spiral length together with an overall length of 125 mm reduce deflection and vibration during drilling, resulting in cleaner holes and longer tool life. This geometry is particularly advantageous for workshop and maintenance tasks where repeatable hole quality is required. The roll-formed or ground cutting edges deliver consistent cutting behaviour across common ferrous and non-ferrous metals. Standardised design that supports consistent results Compliance with DIN 338 identifies this bit as a short twist drill with a cylindrical shank, engineered for machine and hand-tool use. The short format increases stability and makes the tool less prone to bending under load, which benefits precision fitting and assembly processes. Users benefit from predictable tool behaviour and easier tool handling when switching between similar machines, while manufacturers achieve repeatable hole tolerances as required in many metalworking applications. Practical compatibility and drilling behaviour The 118° tip angle helps the drill centre reliably on slightly contoured surfaces and reduces the tendency to wander during the initial contact. As a Type N bit, it is the classic geometry for metal drilling and is suited for alloyed and unalloyed steels, cast iron and many non-ferrous metals. The cylindrical shank enables secure clamping in standard chucks of both hand and drilling machines, and the short construction aids chip evacuation and cooling when used with appropriate cutting fluids. Who gains most from this short HSS bit Metalworkers, toolroom technicians and maintenance engineers will appreciate the combination of HSS toughness and the short format for tasks that require repeatable precision. The design reduces the risk of breakage during moderate feeds and supports efficient workshop workflows. Produced by MetavCUT, this bit is a reliable choice for industrial repairs, prototype shops and technical training environments where durability and consistent drilling performance are essential. We recommend the MetavCUT Type N short Twist Drill for precision metalwork — for personalised technical advice and application support please contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40087-FDA Diameter: 8.7 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Execution: short Type: Type N Material: HSS (High Speed Steel) Colour: Black Suitable for: Hand Drill / Drilling Machine Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily used for machining metal; it performs well on alloyed and unalloyed steels, cast iron and many non-ferrous metals where a short, stable drill is required for precise holes. Can the MetavCUT Twist Drill Type N be used with a hand drill? Yes, the MetavCUT Twist Drill Type N is suitable for both hand drills and machine drilling when clamped securely; its short form reduces bending and improves accuracy in handheld applications. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and larger drill diameters. This shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are Metal drills, Wood drills and Stone/Concrete drills. Why are twist drills pointed? Pointing reduces the chisel edge at the tip, lowering friction and therefore requiring less feed force; it also improves centring of the drill tip in the workpiece. Can a twist drill be used to drill wood? A metal twist drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal bits are easier to re-sharpen and have less aggressive self-feed.

Twist Drill (Type N) — 8.7 mm, 135°, Short, 5% Cobalt‑Alloyed, HSS‑E, DIN 338 The Twist Drill (Type N) is a short HSS‑E metal drill designed for precise drilling in hard and alloyed steels using a Drilling Machine. Twist Drill Type N by MetavCUT 8.7 mm Diameter for precise metal holes 135° Tip for harder materials Short design improves stability and accuracy HSS‑E with 5% Cobalt for increased heat resistance Precision and Durability for Tough Metals Designed as a short Type N bit, this HSS‑E Twist Drill delivers high stability and reduced deflection thanks to its shorter overhang. The 5% cobalt alloy increases red‑hardness and thermal resistance, so heat buildup during high‑speed metal drilling is better tolerated, extending tool life. For users who require repeatable, clean holes in Alloyed Steel and Stainless Steel, the shorter geometry directly translates into improved hole quality and fewer rejects. Optimised Geometry for Clean, Accurate Holes With a 135° tip angle and a fully ground flute geometry, the tool enters harder materials with less walking and lower axial force. The grinding process creates sharp cutting edges and excellent concentricity, resulting in precise bores and smooth chip evacuation. For customers unfamiliar with cutting geometry: the larger tip angle reduces penetration aggressiveness and is recommended for harder workpieces such as stainless steels. Suited Use Cases and Who Benefits This short, Type N HSS‑E drill is particularly appropriate for machinists and professionals working on metal fabrication, maintenance, and toolmaking. The stable design makes it ideal for drilling on bench or column Drilling Machines where rigidity matters most. If occasional mobile hand‑drilling is needed, the bit still performs, but best results are achieved with a steady, well‑clamped setup. Standards, Manufacturing and Practical Advice Manufactured to DIN 338 and available in a fully ground shaft execution, the bit conforms to recognised short twist‑drill specifications for industrial use. Ground (HSS‑G) drills offer superior roundness and cutting precision compared to rolled counterparts, though they can be less tolerant of shock loads. For prolonged runs, use appropriate cutting fluid and moderate feed rates to maximise tool life and hole quality. MetavCUT recommends this short HSS‑E Twist Drill for demanding metalworking tasks — for expert guidance and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke/Hersteller: MetavCUT SKU: 47087-FDA Typ: Type N Durchmesser: 8.7 mm Spitzenwinkel: 135° Ausführung: short Material: HSS‑E Farbe: 5% cobalt-alloyed Schaft Ausführung: fully ground Gesamtlänge: 125 mm Spirallänge: 81 mm Für Bohrmaschine: Drilling Machine Norm: DIN 338 Modellserie: Standard Line Anwendung: Drills for metal Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (Type N) from MetavCUT used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its short form is easier to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? Commonly, drill types are divided into Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Twist Drill (Type N) is the standard choice among metal drills.

Twist Drill — Type N Short HSS‑G, 8.7 mm, 135°, Bright Finished, DIN 338 The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking in Drilling Machines, offering high stability and clean holes for demanding industrial applications. Short HSS‑G design for higher stability 8.7 mm diameter for precision metal drilling 135° point for hard materials like stainless steel Fully ground shank for high runout accuracy DIN 338 standard for consistent quality Improved stability and faster cutting for metalworking Short design increases rigidity: the short Twist Drill reduces overhang and resists bending, which improves positional accuracy during drilling. The HSS‑G (ground High Speed Steel) geometry enables significantly faster material removal — the manufacturer information cites up to 40% faster drilling with 50% less feed force compared with conventional HSS drills — which directly translates into shorter cycle times and lower operator effort when working with steels and other tough metals. Tip geometry tailored for harder materials A 135° point angle is specified to ease entry into hardened surfaces and to reduce chipping when drilling stainless and alloyed steels. For non‑specialists: a larger point angle flattens the tip, spreading cutting forces and reducing the tendency for the drill to "grab", so holes start cleaner and tool life improves under correct cooling and feed. The drill conforms to the Type N normal spiral profile, making it particularly suitable for metal applications rather than soft woods. Precise shank and manufacturing quality for consistent results The fully ground shank and ground flute geometry produce high concentricity and sharp cutting edges. Grinding (HSS‑G) rather than roll‑forming creates very sharp cutting lips and excellent roundness, which yields cleaner holes and better dimensional accuracy. Users should note that ground drills can be more brittle than rolled types and therefore benefit from using appropriate coolant and secure clamping in the machine. Intended applications and user recommendations Designed primarily as a Drill for Metal, this short Twist Drill excels in workshop and production environments where repeatable accuracy is required: toolrooms, maintenance departments and metal fabrication shops. The 8.7 mm size and 125 mm overall length make it well suited to standard drilling tasks on lathes and drilling machines, especially when drilling in alloyed or unalloyed steel, cast materials and hard plastics. For novice users, using moderate feed and coolant will extend tool life and maintain hole quality. For precision metalwork, choose the MetavCUT short HSS‑G Twist Drill — METAV Werkzeuge provides expert advice and ordering support: eMail info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45087-FDA Diameter: 8.7 mm Spiral length: 81 mm Total length: 125 mm Point angle: 135° Type: Type N Execution: short Finish / Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Packaging unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; it is suitable for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper castings, non‑ferrous metals and hard plastics. The short HSS‑G geometry supports precise drilling in harder materials when used with suitable coolant and machine setup. How does the 135° point angle affect drilling performance with the MetavCUT Twist Drill? A 135° point angle on the MetavCUT Twist Drill reduces initial penetration forces and improves centring on hard materials; this larger angle shortens the effective cutting time and helps prevent chipping at the entry, provided the drill is used with appropriate feed and cooling. For what is a Twist Drill mainly used? A Twist Drill is most commonly applied to the machining of high‑strength materials and larger hole diameters. It is easy to regrind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types are there? There are three main drill families: Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for that purpose. Why are Twist Drills sharpened (pointed)? Pointing the tip reduces the cross‑cut at the drill’s tip, which lowers friction and consequently the required feed force; this also improves the drill’s ability to self‑centre in the workpiece for cleaner starts. Can a Twist Drill be used for drilling wood? A metal Twist Drill can be used in wood, but guidance and finish are typically inferior to a dedicated wood bit. Metal drills are easier to resharpen and have lower self‑feed, so they are usable in a pinch but do not give as clean results as wood‑specific bits. At which depths is the Twist Drill most used? Solid drilling is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect. When choosing between HSS and HSSE, evaluate whether the specific working conditions justify the higher cost of HSSE material.