Name: Metav Werkzeuge GmbH
Address: Parkring 45, Emmerich, 46446, DE
Telephone: +49 2822 7131930
Price range: €€€

HSS twist drill, DIN 338, Type N, short, roll forged, black finished 118°

HSS Twist Drill DIN 338, with reduced shank Type N, rollforged, black finished 118°

HSS-G twist drill DIN 338 reduced shank, fully ground, with split point 135°

HSS-G twist drill DIN 338 fully ground, bright, with hexagonal shank 118°

HSS twist drill DIN 345 with taper shank, roll forged 118°

HSS twist drill DIN 345 with taper shank, milled 118°

HSS-G twist drill DIN 338 Type N, short, fully ground, bright finished, with split point 135°

HSS-G twist drill DIN 1897 Type N, with cylindrical shank, fully ground, bright, extra short, with split point, bright finished 135°

HSS-G twist drill DIN 340 long series fully ground, bright finished, with split point 135°

HSS-G body drill double sided, fully ground, bright finished, with split point 135°

HSS-G DIN 1869 long series fully ground, bright, with split point 135° SERIES 32

HSS-G twist drill DIN 338 Type N, short, fully ground, with split point, TIN-coated 135°

HSS-E twist drill DIN 338 Type N, short, fully ground, with split point, 5% cobalt-alloyed 135°

1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Spiralbohrer (HSS, Durchmesser 1 mm, 118°, Typ N, kurz, schwarz, DIN 338) von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzises Bohren in Metall mit hoher Stabilität und klassischer Normalspirale. MetavCUT HSS für Stahl und Nichteisenmetalle Kurze Ausführung für hohe Stabilität DIN 338 konform, Zylinderschaft kurz 118° Spitzenwinkel für präzises Anbohren Typ N Normalspirale, robust bei Metallbohrungen Hohe Standzeit und zuverlässige Materialeigenschaften für Metallarbeiten Der HSS-Werkstoff verbindet Härte und Zähigkeit, sodass dieser kurze Bohrer bei typischen Metallanwendungen eine hohe Standzeit liefert. Durch das rollgewalzte Herstellungsverfahren reduziert sich das Bruchrisiko, insbesondere bei Durchmessern um 1 mm, was die Arbeitssicherheit bei feinen Bohrungen erhöht. Die Kombination aus HSS und kurzer Ausführung sorgt für geringere Schwingungen und sauberere Bohrbilder. Präzision durch kurze Bauart und passgenauen Spitzenwinkel Die kurze Ausführung nach DIN 338 verbessert die Stabilität in der Aufnahme und verringert das Wandern beim Anbohren, was bei stationären und handgeführten Maschinen von Vorteil ist. Der 118° Spitzenwinkel erleichtert das Zentrieren auf gewölbten Oberflächen und verkürzt die Anbohrdauer bei weichen bis mittleren Werkstoffen. Das Resultat ist eine schnellere Fertigstellung präziser Bohrungen mit reduziertem Nacharbeitsaufwand. Vielseitige Eignung und empfohlene Einsatzbereiche Der kurze HSS-Bohrer eignet sich für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe und ist damit ideal für Werkstatt, Montage und DIY-Anwendungen. Für Handbohrmaschinen bietet die kurze Zylinderschaft bessere Kraftübertragung und geringere Auslenkung, wodurch saubere Bohrungen auch bei filigranen Arbeiten möglich sind. Bei Bedarf an tieferen Löchern empfiehlt sich Vorbohren nach der üblichen Checkliste. Für wen dieses Werkzeug entwickelt wurde und welches Ergebnis zu erwarten ist Dieses Werkzeug richtet sich an Handwerker, Wartungsteams und ambitionierte Heimwerker, die präzise Metallbohrungen mit minimaler Vibration benötigen. Die Kombination aus Typ N Normalspirale und kurzer Spirallänge von 12 mm ermöglicht zuverlässige Ergebnisse bei gängigen Metallarbeiten. Anwender profitieren von weniger Bruchausfällen und gleichbleibender Bohrqualität über viele Einsätze hinweg. Empfehlung: Den MetavCUT HSS Kurzbohrer für präzise Metallbohrungen verwenden; bei Fragen zur Anwendung oder kompatiblen Maschinen steht METAV Werkzeuge mit fachkundiger Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gerne zur Verfügung Bezeichnung: Spiralbohrer Marke/Hersteller: MetavCUT SKU: 40010-FDA Material: HSS (Schnellarbeitsstahl) Norm: DIN 338 Typ: Typ N (Normalspirale) Durchmesser: 1 mm Spitzenwinkel: 118° Ausführung: kurz Gesamt-Länge: 34 mm Spiral-Länge: 12 mm Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Materialien können mit dem Spiralbohrer von MetavCUT (Typ N) bearbeitet werden? Der Spiralbohrer von MetavCUT in Typ N ist für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe geeignet und liefert bei diesen Werkstoffen zuverlässige Bohrergebnisse. Eignet sich der MetavCUT HSS Spiralbohrer (kurze Ausführung) für Handbohrmaschinen? Ja, die kurze Ausführung des MetavCUT HSS Spiralbohrers ist besonders für Handbohrmaschinen geeignet, da sie die Stabilität erhöht und die Auslenkung beim Bohren verringert. Wie beeinflusst der 118° Spitzenwinkel die Leistung des MetavCUT Spiralbohrers (Typ N)? Der 118° Spitzenwinkel des MetavCUT Spiralbohrers ermöglicht präziseres Anbohren und verkürzt die Anbohrzeit bei weichen bis mittleren Materialien, wodurch das Zentrieren erleichtert wird. Wann ist ein Vorbohren vor der Verwendung des MetavCUT HSS Spiralbohrers empfehlenswert? Bei größeren Durchmessern oder sehr tiefen Löchern sollte nach der gängigen Praxis vorgebohrt werden; der MetavCUT HSS Spiralbohrer in kurzer Ausführung ist ideal für präzise Endbohrungen nach einem Vorbohrschritt. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40010-FDA","sku":"40010-FDA","mpn":"40010-FDA","name":"Spiralbohrer 40010-FDA","description":"Kurzer HSS Spiralbohrer, Durchmesser 1 mm, 118° Spitzenwinkel, Typ N Normalspirale, schwarz, DIN 338; geeignet für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe; kurze Ausführung für hohe Stabilität und präzise Bohrungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke/Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS (Schnellarbeitsstahl)"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Durchmesser","value":"1 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Gesamt-Länge","value":"34 mm"},{"@type":"PropertyValue","name":"Spiral-Länge","value":"12 mm"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Materialien können mit dem Spiralbohrer von MetavCUT (Typ N) bearbeitet werden?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT in Typ N eignet sich für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe und liefert bei diesen Werkstoffen verlässliche Bohrergebnisse."}},{"@type":"Question","name":"Eignet sich der MetavCUT HSS Spiralbohrer (kurze Ausführung) für Handbohrmaschinen?","acceptedAnswer":{"@type":"Answer","text":"Ja, die kurze Ausführung des MetavCUT HSS Spiralbohrers erhöht die Stabilität in Handbohrmaschinen und verringert die Auslenkung beim Bohren."}},{"@type":"Question","name":"Wie beeinflusst der 118° Spitzenwinkel die Leistung des MetavCUT Spiralbohrers (Typ N)?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel erleichtert das Zentrieren und verkürzt die Anbohrdauer bei weichen bis mittleren Werkstoffen, was präzisere Ergebnisse bei gängigen Metallarbeiten ermöglicht."}},{"@type":"Question","name":"Wann ist ein Vorbohren vor der Verwendung des MetavCUT HSS Spiralbohrers empfehlenswert?","acceptedAnswer":{"@type":"Answer","text":"Bei größeren Durchmessern oder sehr tiefen Löchern sollte vorgebohrt werden; der MetavCUT HSS Spiralbohrer in kurzer Ausführung ist ideal für präzise Endbohrungen nach einem Vorbohrschritt."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-40010-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"HSS Kurzbohrer"},{"@type":"Thing","name":"Metallbohrung"},{"@type":"Thing","name":"DIN 338 kurze Spiralbohrer"}],"mentions":[{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"118° Spitzenwinkel"},{"@type":"Thing","name":"Kurze Ausführung für hohe Stabilität"}]}]}

€0.20

1mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT

Spiralbohrer (1 mm) von MetavCUT – kurz, HSS‑G, TIN‑beschichtet, Typ N, Spitzenwinkel 118°, DIN 338 Der Spiralbohrer ist ein kurzer, geschliffener HSS‑Bohrer für präzise Metallbohrungen in anspruchsvollen Werkstoffen. Kurze Ausführung für hohe Stabilität TIN‑Beschichtung reduziert Verschleiß Geschliffene Geometrie für saubere Bohrbilder Spitzenwinkel 118° für kontrollierten Einzug Norm DIN 338 gewährleistet Austauschbarkeit Robustheit und Werkstoffwahl für langlebige Einsätze Der kurze Spiralbohrer besteht aus HSS‑G und überzeugt durch eine hohe Standzeit bei Metallbearbeitung. Die TIN‑Beschichtung reduziert Reibung und erhöht die Verschleißfestigkeit, sodass die Schneide länger präzise bleibt. Durch die kurze Ausführung verringert sich die Auskraglänge, was die Stabilität erhöht und das Risiko von Ausschlägen beim Anbohren minimiert. Die Kombination aus Material und Beschichtung macht diesen Bohrer zur guten Wahl für legierten und unlegierten Stahl sowie für Gusswerkstoffe. Schnelleres Bohren mit geringerer Kraftanwendung Geschliffene Bohrer erreichen durch scharfe Schneidenführung sauberere Bohrbilder; der hier eingesetzte geschliffene Schliff sorgt für hohe Rundlaufgenauigkeit und reproduzierbare Ergebnisse. Herstelleraussagen zufolge kann diese Geometrie das Bohren deutlich beschleunigen und die erforderliche Anpresskraft senken, was insbesondere bei Serienprozessen Effizienzvorteile bringt. Der Spiralbohrer eignet sich daher für Anwender, die produktiver arbeiten und gleichzeitig gleichbleibende Bohrqualitäten erwarten. Präzision, Einsatzgebiet und Maschinenempfehlung Mit einem Durchmesser von 1 mm befindet sich dieses Produkt im Mikro‑Bereich und ist besonders für präzise Anwendungen geeignet. Typische Einsatzfelder sind feine Metallbearbeitung, Modellbau, Leiterplattenbearbeitung und Präzisionsmechanik. Für beste Ergebnisse wird der Einsatz in stationären, spielfreien Spindeln empfohlen; Handgeführte Maschinen sind bei sehr kleinen Durchmessern nicht ideal, da schon geringe Verkantungen zum Bruch führen können. Der 118° Spitzenwinkel unterstützt das saubere Eindringen in dünne Bleche und Nichteisenmetalle. Anwendungshinweise und Zielgruppe Konstrukteure, Feinmechaniker und Werkstätten mit hoher Anforderung an Maßhaltigkeit profitieren besonders von diesem Bohrer. Für Durchmesser unter 2 mm ist eine hohe Drehzahl und kontrollierter Vorschub zu empfehlen, dabei sollte auf geeignete Kühlung geachtet werden, um Wärmeentwicklung und vorzeitigen Verschleiß zu vermeiden. Vorbohren ist im Mikro‑Bereich meist nicht erforderlich, bei schwierigen Materialien kann jedoch ein Zentrierstift die Lebensdauer verlängern. METAV Werkzeuge unterstützt bei technischen Fragen und Auswahl für spezielle Anforderungen. Empfehlung: Für präzise Metallbohrungen die MetavCUT Spiralbohrer in kurzer Ausführung wählen; bei Unsicherheiten berät METAV Werkzeuge gern per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 46010-FDA Durchmesser: 1 mm Spitzenwinkel: 118° Typ: Typ N Farbe: TIN-beschichtet Ausführung: kurz Material: HSS-G Schaft Ausführung: geschliffen Modellserie: Standard Line Norm: DIN 338 Gesamtlänge: 34 mm Spirallänge: 12 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was eignet sich der Spiralbohrer von MetavCUT für welche Materialien? Der MetavCUT Spiralbohrer (Typ N) ist für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber geeignet und liefert dort saubere Bohrbilder. Kann der MetavCUT Spiralbohrer in einer Handbohrmaschine verwendet werden? Für sehr kleine Durchmesser wie beim MetavCUT Spiralbohrer wird der Einsatz in stationären, spielfreien Maschinen empfohlen; Handgeführte Maschinen erhöhen das Risiko von Bruch und Ungenauigkeiten. Worin besteht der Vorteil eines geschliffenen Bohrers gegenüber rollgewalzten Varianten? Ein geschliffener MetavCUT Spiralbohrer bietet schärfere Kanten und hohe Rundlaufgenauigkeit, was zu präziseren Bohrlöchern führt; dafür ist beim Umgang und Maschineneinsatz erhöhte Sorgfalt geboten. Wie sind Drehzahl und Kühlschmierung für den MetavCUT Spiralbohrer zu wählen? Beim Einsatz des MetavCUT Spiralbohrers in harten Materialien empfiehlt sich hohe Drehzahl und kontinuierliche Kühlung, um Wärmeentwicklung zu minimieren und die Standzeit der Beschichtung zu erhalten. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#46010-FDA","sku":"46010-FDA","mpn":"46010-FDA","name":"Spiralbohrer 46010-FDA","description":"Kurzer Spiralbohrer 1 mm, HSS-G, TIN-beschichtet, Typ N, Spitzenwinkel 118°, Norm DIN 338; geschliffener Zylinderschaft für präzise Metallbohrungen in legierten und unlegierten Stählen sowie Nichteisenmetallen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"1 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"34 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"12 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien eignet sich der MetavCUT Spiralbohrer 1 mm?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 1 mm (MetavCUT, Typ N) eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber und liefert dort saubere Bohrbilder."}},{"@type":"Question","name":"Kann der MetavCUT Spiralbohrer 1 mm in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Für den MetavCUT Spiralbohrer 1 mm wird der Einsatz in stationären, spielfreien Spindeln empfohlen; handgeführte Maschinen erhöhen bei so kleinen Durchmessern das Risiko von Bruch und Ungenauigkeiten."}},{"@type":"Question","name":"Welche Vorteile bietet der geschliffene MetavCUT Spiralbohrer 1 mm gegenüber rollgewalzten Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene MetavCUT Spiralbohrer 1 mm bietet schärfere Kanten und hohe Rundlaufgenauigkeit, was zu präziseren Bohrlöchern führt; dadurch sind sauberere Bohrbilder und höhere Produktivität möglich."}},{"@type":"Question","name":"Wie sind Drehzahl und Kühlschmierung für den MetavCUT Spiralbohrer 1 mm zu wählen?","acceptedAnswer":{"@type":"Answer","text":"Beim Einsatz des MetavCUT Spiralbohrers 1 mm in harten Materialien empfiehlt sich hohe Drehzahl und kontinuierliche Kühlung, um Wärmeentwicklung zu minimieren und die Standzeit der TIN‑Beschichtung zu erhalten."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/product/46010-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz Ausführung"},{"@type":"Thing","name":"HSS-G geschliffene Bohrer"},{"@type":"Thing","name":"TIN Beschichtung für längere Standzeit"}],"mentions":[{"@type":"Thing","name":"DIN 338 Norm"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Einsatz in stationären Spindeln"}]}]}

€0.34

2.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill — Type N short HSS, Diameter 2.1 mm, Point Angle 118°, Black, DIN 338 The Twist Drill Type N is a short High Speed Steel metal drill designed for precise drilling with a Hand Drill in workshop and maintenance applications. Short HSS design for high stability 118° point angle for easy centring 2.1 mm diameter for precise metal holes Conforms to DIN 338 for reliable quality Accuracy and Stability for Precision Metalwork Designed as a short Spiral Length configuration, this Twist Drill delivers improved Stability and minimal deflection during use. The combination of Diameter 2.1 mm and Point Angle 118° ensures accurate entry and a clean bore in typical metalworking tasks. Because the shorter Overall Length reduces overhang, users benefit from greater concentricity and less chatter when working with handheld or benchtop machines. This results in consistent hole geometry and less rework for professional and hobby workshops alike. Durable High Speed Steel for Reliable Performance Manufactured from HSS (High Speed Steel), the tool is optimised for standard metal drilling tasks where toughness and the ability to withstand elevated cutting temperatures matter. The low-temperature production method makes the material more elastic, reducing the risk of breakage when drilling smaller diameters under 6 mm. For operators this means a drill that can be resharpened if necessary and remains dependable when cutting alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and many Plastics. Practical Application and Who Benefits This Twist Drill is tailored for Metal applications and is particularly suited to craftsmen, maintenance technicians and small workshop operators who use a Hand Drill or portable Drilling Machine. The short execution gives an advantage for confined spaces and for tasks requiring precise guidance. Users seeking a classic Type N metal drill will appreciate the balance of ease of use and robustness, making it a go‑to choice for routine drilling where accuracy is required. Conformance to DIN 338 and Design Advantages Compliant with DIN 338, the short variant of the Twist Drill is defined for cylindrical shank HSS drills and targets stable, high‑precision machining on rotating machines and portable equipment. The chosen 118° Point Angle favours centring on curved or softer surfaces and reduces initial walking, while the short design improves rigidity. For tougher materials or when faster penetration is needed, larger point angles are available, but for general metalworking the standard 118° offers a reliable compromise between centring and cutting efficiency. MetavCUT recommends the Type N Twist Drill for precise metal drilling — for technical advice or to confirm suitability contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40021-FDA Diameter: 2.1 mm Point Angle: 118° Type: Type N Colour: Black Execution: Short Spiral Length: 24 mm Overall Length: 49 mm For Drill Machine: Hand Drill Material: HSS (High Speed Steel) Norm: DIN 338 Application: Drills for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for machining higher‑strength materials and larger drilling tasks in Metalworking. It is especially suitable for drilling Alloyed and Unalloyed Steel, Cast Iron, Non‑Ferrous Metals and many Plastics. The short HSS construction allows easier resharpening and offers good resistance to breaking, making it a reliable choice for workshop and maintenance applications. Which three drill types exist and where does the Twist Drill fit? There are three common drill types: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill Type N belongs to the Metal drill category and is optimised for general metal drilling tasks with a cylindrical shank and HSS material.

€0.24

2.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT

MetavCUT Twist Drill – Short HSS‑E, 2.1 mm, 118° Tip, Type N, 5% Cobalt‑alloyed, Fully Ground Shank, DIN 338 The MetavCUT Twist Drill is a short, high‑performance Twist Drill designed for precision metalworking with drilling machines and hand drills. Short design for higher stability 2.1 mm diameter for precision holes 118° tip for clean entry in soft metals HSS‑E with 5% cobalt for increased wear resistance Fully ground shank for high runout accuracy Exceptional wear resistance for demanding metalwork Made from HSS‑E with 5% cobalt, this short Twist Drill delivers improved Wear Resistance and edge stability when machining steels and other hard metals. The cobalt alloy increases red hardness so the drill maintains cutting performance at higher temperatures, reducing tool changes during batch operations. This translates into longer tool life and fewer interruptions in production. Short length for higher stability and precise holes The reduced overall length and shorter protruding flute of this short design result in less deflection and a more rigid setup. That stability improves concentricity and produces precise Holes even when working with tougher materials or in less rigid chucks. For applications where runout and bending must be minimised, the compact geometry gives a clear advantage in repeatable hole quality. Ground shank and DIN 338 compliance for consistent results A fully ground Shank ensures excellent Runout Accuracy and reliable seating in the chuck, while the DIN 338 classification confirms the product meets standardised dimensions and tolerances for short twist drills. The Type N normal spiral geometry is the classic solution for metal drilling, balancing chip evacuation and cutting action. The 118° tip angle aids entry and centring on slightly curved or soft metal surfaces, producing clean starts. Target users and recommended applications This short Twist Drill is intended for metalworkers, maintenance technicians and workshop environments that require accurate, repeatable holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. Use with adequate coolant and appropriate spindle speeds to maximise life. For handheld use or on drilling machines the combination of HSS‑E metallurgy and compact form factor is particularly beneficial for precision maintenance tasks and small‑batch production. Strong recommendation: choose the MetavCUT short Twist Drill for demanding metal drilling tasks — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47021-FDA Diameter: 2.1 mm Overall length: 49 mm Spiral length: 24 mm Tip angle: 118° Type: Type N Material: HSS‑E Execution: Short Cobalt content: 5% cobalt-alloyed Shank: Fully ground For drilling machine: Drilling Machine (Hand drill) Model series: Standard Line Norm: DIN 338 Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining metal; as a short Twist Drill it is especially suited to precise holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics in both workshop and maintenance environments. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category designed for metalworking applications. Can a metal drill be used in wood and how does the MetavCUT Twist Drill perform? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and surface finish are generally inferior compared with dedicated wood drills; metal drills are easier to resharpen and show less self‑feed, so they can be used for simple wood tasks but with reduced precision. Why is the 118° tip used and what benefit does it bring for the MetavCUT Twist Drill? The 118° tip reduces the aggressiveness of the cutting edge and improves centring on slightly curved or softer surfaces; for the MetavCUT Twist Drill this contributes to cleaner starts and easier penetration in softer metals while maintaining acceptable chip formation.

€0.85

2.1mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Twist Drill — Type N extra short, 2.1 mm, 118°, HSS‑G, Bright Finished, DIN 1897 An extra‑short Twist Drill (Type N) designed for Drilling Machines and Hand Drills, offering a 2.1 mm Diameter and a 118° Tip Angle for precise, low‑force metalworking. Extra‑short HSS‑G Twist Drill for tight spaces 2.1 mm Diameter for precise pilot holes 118° Tip for reliable centering in soft materials Cylindrical Shank fits standard three‑jaw chucks DIN 1897 standard; bright finished for durability Faster Drilling with Less Force and Higher Stability The MetavCUT Type N Twist Drill uses a ground HSS‑G geometry that reduces friction and delivers up to 40% faster drilling compared with conventional HSS tools. This results in lower operator effort and reduced heat build‑up, especially when working with steel and cast materials. The extra short design increases torsional stability and lowers the risk of Breakage, making it particularly suitable for tight setups or thin‑walled components where control is critical. Customers benefit from shorter cycle times and a more consistent Hole Quality. Compact Design That Excels in Confined Workspaces Where access is limited, the extra short length of this Twist Drill provides a clear advantage. Shorter Overall Length and reduced flute length mean improved Rigidity and less Whipping, so holes remain true even when working in awkward positions or with Hand Drills. The Cylindrical Shank allows universal chuck clamping and quick tool changes, which supports efficient workshop workflows and reduces set‑up time for repetitive tasks. Broad Material Compatibility and Clear Application Guidance This Type N Twist Drill is optimized for metalworking: it is suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. For users less familiar with drill types: Type N denotes a Normal Spiral suited for Metal; it is not intended as the first choice for very soft materials like wood where specialist bits offer cleaner guidance. When precise centering is required on curved surfaces, the 118° Tip Angle helps start the Hole with low point‑load and reduced surface wandering. Practical Handling, Sharpening and Durability The HSS‑G Material provides a balance of Hardness and Toughness; it is easy to Regrind, which extends Tool Life and allows maintenance of a sharp Cutting Edge in‑house. The bright finished surface supports corrosion resistance and visual inspection of wear. Because the Shank is smooth and cylindrical, users should ensure correct Chuck Torque and regular inspection to prevent slippage under high loads. For frequent heavy‑duty applications, consider matching drive methods and clamping systems to the task to maximise performance. Who Benefits from This Tool Professionals and hobbyists who require compact, reliable drilling performance in metalworking environments will appreciate the combination of extra rigidity and ease of use. The MetavCUT Type N Twist Drill is particularly suited for workshops doing precision pilot holes, maintenance tasks, and any operation where space constraints or thin materials demand a short, robust cutter. Choose the MetavCUT Type N Twist Drill for precise metal drilling — for expert advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 56021-FDA Type: Type N Diameter: 2.1 mm Total Length: 38 mm Spiral Length: 12 mm Tip Angle: 118° Material: HSS‑G Shank: Cylindrical Finish: Bright finished Execution: Extra short Application: Drills for Metal Standard: DIN 1897 Series: Standard Line For Drill Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill like the MetavCUT Type N Twist Drill is primarily used for machining high‑strength materials and for larger hole diameters where tool robustness is essential. This design is straightforward to Regrind and endures greater loads, making it suitable for demanding Metalworking operations. Which 3 drill types are there? In practice three common drill categories exist: Metal Drill, Wood Drill and Stone/Concrete Drill. The MetavCUT Type N Twist Drill belongs to the Metal Drill group and is engineered for performance in metallic materials. Can the MetavCUT Type N Twist Drill be used with hand drills? Yes, the MetavCUT Type N Twist Drill is suitable for Hand Drills and Drilling Machines when clamped securely in a compatible Chuck. Its Extra‑short design improves stability under manual operation and reduces the risk of Breakage in confined setups. Why are Twist Drills pointed? Pointing the tip reduces the cross‑cut at the tip, which lowers friction and therefore requires less Feed Force. A well‑sharpened tip also improves Centering and helps the Drill begin the hole cleanly in the workpiece.

€0.34

2.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Spiralbohrer MetavCUT HSS 2,25 mm, 118°, Typ N, kurz, schwarz, DIN 338 Der Spiralbohrer von MetavCUT ist ein kurzer HSS-Bohrer für präzise Metallbohrungen mit hoher Stabilität und Eignung für Handbohrmaschine und stationäre Maschinen. Kurze Ausführung für hohe Stabilität HSS: elastisch und bruchsicher bei kleinen Durchmessern Norm DIN 338: kurze Spiralbohrer mit Zylinderschaft Typ N Normalspirale, optimiert für Metall Passend für Handbohrmaschine und allgemeine Metallarbeiten Präzise Bohrungen im Standard-Bereich gewährleisten sauberen Werkstückkontakt Mit einem Durchmesser von 2,25 mm gehört dieses Werkzeug in den Standard-Bereich (2,0–13,0 mm) und eignet sich damit besonders für Alltagsaufgaben in Werkstatt, Montage und DIY-Projekten. Der Einsatz in dünnen bis mittleren Blechen, Profilen und Flachstahl wird durch die kurze Auskraglänge unterstützt, weil die Verringerung der Auslenkung die Rundlaufgenauigkeit erhöht. Anwender profitieren von einer schnelleren Bohrung und weniger Nacharbeit, wenn vor allem mittlere Werkstücke präzise bearbeitet werden müssen. HSS-Material und Fertigung sorgen für Belastbarkeit und Standzeit Die Verwendung von HSS in Kombination mit der kurzen Ausführung reduziert das Bruchrisiko bei Durchmessern unter 6 mm und bietet zugleich gute Zähigkeit bei legierten und unlegierten Stählen. Durch rollgewalzte oder geschliffene Herstellungsverfahren gemäß DIN 338 wird die Spanabfuhr optimiert und die Schneidkantenfestigkeit erhöht. Für Anwender bedeutet das: längere Lebensdauer des Werkzeugs und konstanter Bohrfortschritt, besonders bei wiederholten Bohrvorgängen in Metall. Praktische Einsatzhinweise für sicheren und effizienten Arbeitsablauf Für die Verwendung mit Handbohrmaschine ist die Zylinderschaft ideal, da sie die Montage vereinfacht und die Kraftübertragung sicherstellt. Bei hoher Präzision empfiehlt es sich, vor dem Direktbohren mit einem Zentrierbohrer anzupunken, um ein Wandern zu vermeiden. Tiefe Bohrungen über das Fünffache des Durchmessers sind nicht ideal, da die Spanabfuhr dann eingeschränkt sein kann. Der Spitzenwinkel von 118° unterstützt das Zentrieren auf ebenen und leicht gewölbten Oberflächen und ist daher eine gute Wahl für allgemeine Metallarbeiten. Mit dem MetavCUT Spiralbohrer setzen Sie auf ein robustes HSS-Werkzeug für präzise Metallbohrungen; bei Unklarheiten oder speziellen Anforderungen berät METAV Werkzeuge gern persönlich per eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 oder WhatsApp: +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 400225-FDA Durchmesser: 2,25 mm Spitzenwinkel: 118° Typ: Typ N Material: HSS Norm: DIN 338 Ausführung: kurz Farbe: schwarz Gesamtlänge: 53 mm Spirallänge: 27 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien eignet sich der Spiralbohrer MetavCUT (Typ N) am besten? Der Spiralbohrer MetavCUT (Typ N) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; die Normalspirale ist auf Metallbearbeitung ausgelegt und zeigt dort optimale Leistung. Kann ich den Spiralbohrer MetavCUT HSS 2,25 mm mit einer Handbohrmaschine verwenden? Ja, der Spiralbohrer MetavCUT ist für die Verwendung mit Handbohrmaschine ausgelegt; die Zylinderschaft erlaubt einfache Spannaufnahme und sichere Kraftübertragung bei üblichen Werkstattanwendungen. Wie vermeide ich Bruch beim Arbeiten mit dem Spiralbohrer MetavCUT? Um Bruch zu vermeiden, empfiehlt sich bei sehr kleinen Durchmessern eine hohe Drehzahl und moderater Vorschub; der HSS-Aufbau des Spiralbohrers MetavCUT reduziert das Bruchrisiko zusätzlich, insbesondere bei rollgewalzter Fertigung. Ist der Spiralbohrer MetavCUT für tiefe Bohrungen geeignet? Für sehr tiefe Bohrungen über das fünffache des Durchmessers ist der Spiralbohrer MetavCUT weniger geeignet; hier empfiehlt sich mehrstufiges Aufbohren oder spezielle Werkzeuge zur sicheren Spanabfuhr. Entspricht der Spiralbohrer MetavCUT der Norm DIN 338 und was bedeutet das? Ja, der Spiralbohrer MetavCUT entspricht der Norm DIN 338, was die Klassifizierung kurzer Spiralbohrer mit Zylinderschaft regelt und dadurch Maßstäbe für Abmessung, Ausführung und Einsatzgebiet setzt. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#400225-FDA","sku":"400225-FDA","mpn":"400225-FDA","name":"Spiralbohrer 400225-FDA","description":"Spiralbohrer MetavCUT HSS 2,25 mm, 118°, Typ N, kurz, schwarz nach DIN 338; kurzer HSS-Bohrer für präzise Metallbohrungen in Handbohrmaschine und stationären Maschinen; hohe Stabilität und reduzierte Bruchgefahr bei kleinen Durchmessern.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"2,25 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"53 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"27 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien eignet sich der Spiralbohrer MetavCUT (Typ N) am besten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT HSS 2,25 mm (Typ N) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; die Normalspirale ist auf Metallbearbeitung ausgelegt."}},{"@type":"Question","name":"Kann ich den Spiralbohrer MetavCUT HSS 2,25 mm mit einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT HSS 2,25 mm ist für die Verwendung mit Handbohrmaschine ausgelegt; die Zylinderschaft ermöglicht einfache Spannaufnahme und sichere Kraftübertragung."}},{"@type":"Question","name":"Wie vermeide ich Bruch beim Arbeiten mit dem Spiralbohrer MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Um Bruch zu vermeiden, empfiehlt sich bei sehr kleinen Durchmessern hohe Drehzahl und moderater Vorschub; der HSS-Aufbau und rollgewalzte Fertigung reduzieren das Bruchrisiko."}},{"@type":"Question","name":"Ist der Spiralbohrer MetavCUT für tiefe Bohrungen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Für sehr tiefe Bohrungen über das fünffache des Durchmessers ist der Spiralbohrer MetavCUT weniger geeignet; hier empfiehlt sich mehrstufiges Aufbohren oder spezielle Werkzeuge zur sicheren Spanabfuhr."}},{"@type":"Question","name":"Entspricht der Spiralbohrer MetavCUT der Norm DIN 338 und was bedeutet das?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT entspricht der Norm DIN 338; diese Norm beschreibt kurze Spiralbohrer mit Zylinderschaft und legt Abmessungen sowie Ausführungen fest."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/400225-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer MetavCUT HSS"},{"@type":"Thing","name":"Kurzbohrer nach DIN 338"},{"@type":"Thing","name":"Bohrer für Metallanwendungen"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine geeignet"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"HSS Werkstoff"},{"@type":"Thing","name":"Kurze Ausführung für Stabilität"}]}]}

€0.24

2.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill – Type N short, 2.2 mm, 118° tip, HSS, DIN 338, black (MetavCUT) The Twist Drill (Type N short) is a precision HSS metal drill designed for stable, accurate drilling in steels and non‑ferrous materials with a 2.2 mm diameter and a 118° tip angle. Short design for higher stability and precision Roll‑formed HSS for elasticity and reduced breakage risk Conforms to DIN 338 for short cylinder‑shank twist drills Ideal for metal drilling with hand drills and drilling machines Robust HSS construction for reliable metalworking results Made from HSS (High Speed Steel), this short Twist Drill from MetavCUT offers elasticity that reduces the risk of breakage, especially for small diameters. The roll‑forming production method enhances toughness for standard metalworking tasks and makes the tool suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics. This material choice translates directly into longer tool life and predictable performance during repetitive drilling operations. Short geometry that improves rigidity and accuracy A shorter overall length reduces the unsupported overhang and therefore the tendency to deflect, delivering greater stability and improved hole accuracy in demanding setups. Built to the DIN 338 specification for short cylinder‑shank twist drills, the compact execution is advantageous when working on bench machines or when a hand‑held drilling machine must maintain a tight tolerance. The Type N spiral provides the familiar flute geometry optimized for metal. Tip geometry and flute length that aid centring and chip evacuation The 118° tip angle supports reliable centring on softer metals and eases initial penetration; this tip geometry also keeps feed forces moderate and improves guidance on curved surfaces. With a flute (spiral) length of 27 mm and a total length of 53 mm, chip evacuation is efficient for typical metal drilling tasks while keeping the tool rigid. These features reduce chatter and help produce cleaner, more consistent holes with minimal rework. Who benefits and how to get the best results Metalworkers, maintenance technicians and precision hobbyists will appreciate the balance of toughness and precision offered by this short Twist Drill. For best results, use appropriate cutting speeds, steady feed and cutting fluid when drilling metals; secure the workpiece firmly and avoid excessive cantilever to maintain accuracy. For questions about suitability, speeds or matching drill holders, METAV Werkzeuge provides technical advice and selection support. Strong recommendation from MetavCUT: choose this Type N short Twist Drill for precision metal drilling—METAV Werkzeuge offers expert consultation if unsure about specifications or application via eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40022-FDA Diameter: 2.2 mm Tip angle: 118° Type: Type N Colour: black Execution: short Material: HSS Standard: DIN 338 Spiral length: 27 mm Total length: 53 mm Application: Drills for metal For drill machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is this Twist Drill best used for and which materials suit it? The Twist Drill from MetavCUT (Type N) is primarily intended for metalworking; it performs well in alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics, offering a good combination of toughness and cutting performance. Can the MetavCUT Twist Drill Type N be used in a hand drill? Yes, the MetavCUT Twist Drill (Type N short) is suitable for use with hand drills and drilling machines; its compact length reduces flex and improves hole quality when a secure fixture and correct speed are used. For what is a Twist Drill used? A Twist Drill is mainly applied to machining high‑strength materials and larger drill diameters; its geometry is easy to sharpen and tolerates higher loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drill, wood drill and stone/concrete drill; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking. Why are twist drills pointed? Pointing the tip of a Twist Drill reduces the cross‑cut at the tip, which lowers friction and thus the required feed force while improving centring and initial penetration into the workpiece. Can you drill wood with a metal Twist Drill? A metal Twist Drill from MetavCUT can be used in wood, but guidance is poorer and finish is less clean compared with dedicated wood bits; however, metal drills are easier to resharpen and have a lower tendency to self‑feed.

€0.24

2.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT

Twist Drill — Type N short, 2.2 mm, 118° point angle, 5% cobalt‑alloyed HSS‑E, DIN 338, fully ground The Twist Drill Type N short is a precision metal‑drilling tool designed for Drilling Machines, offering high stability and reliable performance in demanding metalworking applications. Short design for higher stability and precision 5% cobalt‑alloyed HSS‑E for hard metals Fully ground shank for excellent concentricity 118° point angle improves centring on curved surfaces DIN 338 compliant for short twist drills Robust Material for Longer Tool Life and Harder Materials The HSS‑E composition with 5% Cobalt increases heat resistance and wear performance compared with conventional high‑speed steels, enabling longer service life when machining alloyed and unalloyed steel. Because the substrate material is designed for elevated temperatures, the bit maintains hardness during sustained cutting, which reduces flank wear and the need for frequent replacement. This makes the short Twist Drill particularly suitable when material hardness and repeatable hole quality are priorities. Short Design That Boosts Accuracy and Reduces Deflection A reduced overall length and shorter protruding section result in a lower tendency to bend under load, delivering improved straightness and hole roundness. For precision tasks on a Drilling Machine, the short format keeps vibration and chatter to a minimum, so holes are cleaner and reaming or finishing steps are often reduced. The roll‑or‑grind manufacturing choice ensures consistent geometry; the fully ground variant provides especially sharp cutting lips and high runout accuracy. Geometry and Cutting Behaviour Adapted for Metalwork With a 118° Point Angle and classic Type N spiral, this drill is optimised for typical Metal drilling operations. The point geometry aids in centring on slightly curved or uneven surfaces while reducing the risk of walking. For users unfamiliar with terms: the point angle describes the acute tip shape that controls penetration and chip formation; a larger angle like 118° balances entry ease with a robust cutting edge suited to steels and non‑ferrous alloys. Ground Shank and DIN 338 Compliance for Machine Use The Fully Ground shank guarantees tight concentricity in chucks and collets, translating to reduced runout and longer life of both the tool and the spindle. Conformity with DIN 338 signals adherence to standard dimensions and tolerances for short Twist Drills with cylindrical shank, facilitating straightforward tool selection and replacement in industrial and workshop inventories. For stationary and portable drilling equipment, this predictability simplifies setup and quality control. Intended Applications and Who Benefits Most Engineers, maintenance technicians and metalworking professionals will find the short Twist Drill Type N advantageous for tasks requiring precise, repeatable holes in steels, cast iron, non‑ferrous metals and many plastics. The combination of cobalt alloying and a short flute length makes this drill particularly effective for smaller diameters where stability under higher cutting speeds is essential. Choose this variant where accuracy and tool life under demanding conditions are more important than deep or through‑hand drilling. For technical questions or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert advice: info@metav-werkzeuge.com — Phone +49 2822 7131930 — WhatsApp +49 170 2837271. We recommend the MetavCUT short Twist Drill Type N for precision metalworking; contact METAV Werkzeuge for personalised guidance and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930. Designation: Twist Drill Brand: MetavCUT SKU: 47022-FDA Diameter: 2.2 mm Spiral length: 27 mm Overall length: 53 mm Point angle: 118° Type: Type N Execution: short Colour / Alloy: 5% cobalt‑alloyed Shank execution: fully ground Material: HSS‑E Application: Drills for metal Model series: Standard Line Norm: DIN 338 For drilling machine: Drilling Machine Manufacturer contact: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill Type N short from MetavCUT? The MetavCUT Twist Drill Type N short is primarily used for machining metal; its short design and HSS‑E composition make it well suited to drilling alloyed and unalloyed steel, cast iron and non‑ferrous metals on both stationary and portable Drilling Machines. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill Type N short can be used in a Hand Drill or other Drilling Machine, but best results are achieved with stable clamping and appropriate cutting speed and coolant for metalworking. For what are Twist Drills used? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters. This form is relatively simple to resharpen and withstands higher loads, making it suitable for workshop and industrial metal applications. Which three drill types exist? The primary drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑cut at the drill point, which lowers friction and required feed forces while improving centring in the workpiece, resulting in cleaner holes and less tool stress. Can a metal drill be used for wood? A Metal Drill like the MetavCUT Twist Drill can be used in Wood, but it provides poorer guidance and a less clean finish than dedicated wood drills. Metal drills are easier to resharpen and exhibit lower self‑feeding tendencies.

€0.85

2.2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Twist Drill (Type N) – 2.2 mm, 118° tip, Extra Short, Bright Finished, HSS‑G, DIN 1897 — MetavCUT The Twist Drill (Type N) is an extra‑short HSS‑G metal drill designed for handheld and angle drilling, offering a 2.2 mm diameter with a 118° tip angle for improved centring and reliable performance in thin materials. Extra‑short design for greater stability HSS‑G material for durable cutting 118° tip improves centring on curved surfaces Cylindrical shank fits standard drill chucks Complies with DIN 1897, Type N spiral Greater stability and faster drilling in metalworking The extra short geometry reduces overhang and increases torsional stiffness, so drilling with less chatter and a lower breakage risk is achievable even under hand‑held conditions. Made from HSS‑G, this bit combines heat‑resistance and toughness so that cuts remain sharp longer; users benefit from up to 40% faster penetration and reduced required feed force compared with standard HSS bits. This makes the tool particularly efficient for working with alloyed and unalloyed steels where consistent, repeatable holes are required. Reliable handling in confined spaces and on portable machines Designed for use with a Drilling Machine and especially suited to Hand Drills and Angle Drills, the bit’s Cylindrical shank ensures compatibility with standard three‑jaw chucks and simple, secure mounting. The short overall length makes accessibility in narrow or recessed areas much easier, allowing clean boreholes in thin sheets and profiles. For professionals and hobbyists who regularly face limited working room, the compact shape reduces operator fatigue and improves control. Tip geometry and spiral type for precise centring The 118° tip angle offers a good balance between cutting aggressiveness and centring behaviour; for softer materials such as aluminium and certain plastics the wider angle helps the drill start cleanly without wandering. As a Type N (normal spiral) configuration, the flute geometry is optimised for metalworking chips evacuation while maintaining a robust cutting lip. An explanation for less experienced users: the tip angle determines how quickly the drill bites into the material and how well it centres on curved or uneven surfaces. Standards, suitability and maintenance benefits Manufactured to DIN 1897 specifications within the Standard Line, this bit is intended for general metal drilling tasks including steel, cast iron and non‑ferrous metals. Its short, robust form is ideal for drilling into thin components like sheet metal and profiles where longer drills would flex. The HSS‑G composition allows economical resharpening, extending service life and lowering lifecycle costs for workshops that maintain their own tooling. We strongly recommend the MetavCUT Twist Drill Type N for precision metalwork; for technical guidance or to confirm suitability for your application, contact METAV Werkzeuge’s expert team by e‑mail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 — METAV Werkzeuge offers comprehensive, competent consultation to help you choose the right tool for the task. Twist Drill Brand: MetavCUT SKU: 56022-FDA Diameter: 2.2 mm Total length: 38 mm Spiral length: 12 mm Tip angle: 118° Type: Type N Execution: extra short Finish/Colour: bright finished Shaft execution: Cylindrical Material: HSS‑G Standard: DIN 1897 For drill machine: Drilling Machine (Hand Drill) Application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill (Type N) suitable for? The MetavCUT Twist Drill Type N is optimised for metalworking: it performs well in alloyed and unalloyed steels, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics; its HSS‑G composition ensures heat resistance and long cutting life when used under appropriate speeds and lubrication. Can the MetavCUT Twist Drill (Type N) be used in a handheld drill? Yes, the MetavCUT Twist Drill Type N with its extra short design and Cylindrical shank is suitable for Hand Drills and Angle Drills; the compact length improves stability and accessibility, though correct clamping in a three‑jaw chuck and suitable drilling parameters are important to avoid slippage. For what are Twist Drills used? Twist Drills are primarily applied to the machining of high‑strength materials and larger hole diameters. Their shape makes them easy to resharpen and able to withstand higher loads; they are commonly used where robustness and repeatable performance are required. Which 3 drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills.

€0.34

2.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill (Type N) – Short HSS, 2.3 mm, 118°, Black, DIN 338 A Twist Drill (Type N) short design for precise metal drilling with a 2.3 mm Diameter and 118° Tip Angle. HSS material for reliable metal drilling Short design according to DIN 338 for stability 118° Tip for rapid penetration on softer metals Suitable for Drilling Machine and Hand drills Black finish reduces glare and improves handling Stable short design for higher precision and less deflection The short overall length and reduced overhang of this Twist Drill increase rigidity and reduce the risk of bending during drilling operations. Users benefit from more consistent hole geometry and longer tool life because the shorter protrusion from the Chuck minimizes vibration. This stability is especially valuable when working with harder metals where deflection would otherwise spoil tolerances and require costly rework. The design supports precise, repeatable results on production and workshop tasks. HSS material and DIN 338: durability explained for everyday use Manufactured from HSS (High Speed Steel) and produced to DIN 338 for short cylindrical shank drills, this tool combines toughness with grindability. For non‑specialists: HSS retains hardness at elevated temperatures, allowing reliable cutting when drilling Steel, Cast Iron, Non‑ferrous Metals and Plastics. DIN 338 classifies the short execution and ensures consistent dimensions and quality. The Type N spiral provides the standard flute geometry optimized for metalworking and straightforward resharpening when required. Optimised for metalworking tasks and common machines This Type N Twist Drill has been developed for drilling metal with hand drills and drilling machines, offering a balanced compromise between penetration rate and centring ability thanks to its 118° tip. It is well suited for general metal fabrication, maintenance and workshop repairs where consistent hole quality matters. Professionals and hobbyists alike profit from the drill’s predictable behaviour on a range of ferrous and non‑ferrous materials and from the ease of integration into existing tooling assortments. Safe handling, sharpening and machine advice for reliable results Correct seating in the Chuck, steady feed and appropriate cutting speed significantly extend service life. The shortened flute length lowers chatter but requires attention to coolant and swarf evacuation on deep holes. If regrinding is necessary, the classic Type N geometry is easy to re‑sharpen, restoring cutting edges and maintaining centring. For guidance on cutting speeds, clamping or resharpening, contact METAV Werkzeuge; expert advice reduces downtime and avoids incorrect use that shortens tool life. Choose the MetavCUT Twist Drill Type N 2.3 mm short HSS for precise metalwork — contact METAV Werkzeuge for personal technical consultation and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 40023-FDA Diameter: 2.3 mm Tip Angle: 118° Material: HSS (High Speed Steel) Execution: Short Type: Type N Spiral Length: 27 mm Overall Length: 53 mm Norm: DIN 338 Colour: Black Suitable for: Drilling Machine / Hand Drill Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is designed primarily for metalworking and performs well on alloyed and unalloyed Steel, Cast Iron and many Non‑ferrous Metals as well as suitable Plastics; its HSS composition helps maintain cutting performance at elevated temperatures during continuous drilling. How should I care for and resharpen a MetavCUT Twist Drill? A MetavCUT Twist Drill Type N can be resharpened on a bench grinder following the original point geometry; maintenance includes correct seating, controlled feed and coolant use to reduce heat. For process settings or resharpening advice, METAV Werkzeuge offers competent support. What is a Twist Drill used for? A Twist Drill is mainly applied when working on high‑strength materials and for larger drill diameters. Its shape is easy to grind and it withstands significant loads. Which three drill types exist? The three main drill types are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills split-pointed? Splitting the point reduces the web at the tip of the Twist Drill. By regrinding the point, friction forces are significantly lowered, which reduces required feed forces and improves centring of the drill in the workpiece. Can a Twist Drill be used to drill wood? A Metal drill can also be used in Wood, but guidance and finish are worse. Metal drills are easier to regrind and have less self‑feed, so results are less clean compared with dedicated Wood drills. For which drilling depths is the Twist Drill the most used tool? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool.

€0.24

2.3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Twist Drill — Type N, Ø 2.3 mm, 118° tip, Extra Short, Bright Finished, HSS-G, DIN 1897 (MetavCUT) The Twist Drill Type N is an extra-short HSS-G drill bit designed for precision metal drilling with hand and angle drilling machines. Extra-short design for greater stability High-speed HSS-G for fast metal drilling 118° tip for easier centring on curved surfaces Cylindrical shank fits standard three-jaw chucks Conforms to DIN 1897 for consistent quality Precision and Strength for Metalworking Designed for efficient metal removal, the Twist Drill from MetavCUT combines a HSS-G cutting material with a ground geometry that allows faster penetration and reduced operator effort. The ground HSS geometry reduces required feed force compared with conventional HSS, making drilling smoother and more controlled. This results in fewer deflections and cleaner holes when working in alloyed and unalloyed steels, cast iron, sintered iron and non-ferrous metals. Stable Short-Length Design for Confined Spaces The extra-short execution significantly improves rigidity: a shorter overall and flute length reduces the lever arm and thus the risk of breakage under lateral loads. This makes the bit particularly suitable when access is limited, or when drilling thin-walled components such as sheets and profiles. The compact geometry increases torsional resistance and supports steady drilling in workshop and maintenance applications. Compatibility, Tip Geometry and Practical Effects With a 118° tip angle, the Type N geometry eases centring on slightly curved surfaces and suits softer metals as well as general workshop use. The cylindrical shank fits standard three-jaw chucks, offering universal compatibility with most hand and angle drilling machines. The Type N normal spiral is optimised for metalworking and produces reliable chip removal and hole quality in common ferrous and non-ferrous materials. Who benefits from this Twist Drill Small workshops, maintenance technicians, and hobbyists benefit from the robust construction and versatile application range of this MetavCUT drill. The combination of extra-short length, HSS-G material and conformity to DIN 1897 makes it a practical choice for repetitive metal drilling tasks where stability and hole accuracy are required. METAV Werkzeuge provides expert advice if there is any uncertainty about suitability for a specific application. For precision metal drilling choose the MetavCUT Twist Drill Type N — METAV Werkzeuge offers detailed technical support and personalised advice via info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56023-FDA Diameter: 2.3 mm Spiral length: 12 mm Overall length: 38 mm Tip angle: 118° Type: Type N Material: HSS-G Execution: Extra short Shaft execution: Cylindrical Finish/Colour: Bright finished Standard: DIN 1897 For use in: Drilling Machine (Handbohrmaschine / angle and hand drills) Model series: Standard Line Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is optimised for metalworking: it is suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non-Ferrous Metals and Hard Plastics; this makes it a reliable choice for workshop and industrial applications. Can the Twist Drill be used in handheld drills? Yes, the MetavCUT Twist Drill Type N with a Cylindrical shank is intended for Hand and Angle Drilling Machines and can be clamped in standard three-jaw chucks; its Extra Short design improves stability in handheld operations. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and larger hole diameters; this form is easy to regrind and withstands higher loads. Which three drill types exist? There are three common drill categories: Metal drill, Wood drill, and Stone/Concrete drill. Why are Twist Drills sharpened (pointed)? The sharpening reduces the cross cutting edge at the tip of the Twist Drill, lowering friction forces and therefore the required feed force while improving tip centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can also be used in wood, but accuracy and guidance are inferior compared with dedicated wood drills; metal drills are easier to regrind and exhibit less self-feeding. For which drilling depths is the Twist Drill most commonly used? A solid hole is typically made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is not universally true; choose based on actual working conditions to determine whether the higher investment in HSSE is justified.

€0.34

2.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Spiralbohrer Typ N (HSS), kurz · Ø 2,4 mm · 118° Spitzenwinkel · schwarz · DIN 338 von MetavCUT Der Spiralbohrer Typ N ist ein kurzer HSS-Bohrer für präzise Metallbohrungen mit Ø 2,4 mm und hoher Stabilität bei stationären und handgeführten Maschinen Spiralbohrer Typ N, kurze Ausführung aus HSS Hohe Stabilität durch kurze Auskraglänge Für Metall: legierter und unlegierter Stahl geeignet Standard-Spitzenwinkel 118° für sauberen Anbohrstart Normkonform nach DIN 338 Präzise Bohrungen durch reduzierte Auskraglänge und robuste Ausführung Mit reduzierter Auskraglänge sorgt dieser kurze Bohrer für deutlich geringere Schwingungen und verbesserte Parallelität beim Bohren. Die kurzen Abmessungen reduzieren das Risiko von Verbiegen und sorgen für wiederholbare Ergebnisse bei Serien oder Einzelteilen. Anwender profitieren von einer stabilen Schnittführung, die insbesondere bei Durchmessern im Standardbereich schneller zu sauberen Bohrbildern führt. Material- und Normbeschreibung erklärt: warum HSS und DIN 338 wichtig sind Die Fertigung aus HSS (High Speed Steel) macht den Bohrer elastisch und widerstandsfähig gegen thermische Belastung bei typischen Metallbearbeitungen. Die Norm DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft und sichert die Kompatibilität mit gängigen Spannfuttern. Für Anwender bedeutet das: einfache Teileauswahl, verlässliche Toleranzen und Austauschbarkeit im Betrieb. Anwendungsempfehlung: Einsatzgebiet und Maschinenkompatibilität Der kurze Bohrer ist ausgelegt für Bohrarbeiten in Metall mit Handbohrmaschine ebenso wie für stationäre Maschinen mit sicherer Spannfutteraufnahme. Bei dünnen bis mittleren Blechen sowie bei Profilen erzielt der Bohrer konstante Vorschübe; bei härteren Werkstoffen empfiehlt sich ein passender Kühlschmierstoff. Für besonders präzise Passungen vor dem Endmaß mit einem Zentrierbohrer anpunktieren. Zielgruppe und Praxisnutzen: für Profis und anspruchsvolle Heimwerker Entwickelt für Anwender, die Wert auf Stabilität und schnelle Prozesse legen, eignet sich der Bohrer für Werkstätten, Montagebereiche und ambitionierte Heimwerker. Die Kombination aus Typ N Geometrie und 118° Spitzenwinkel erleichtert das Zentrieren auf gewölbten Oberflächen und reduziert Ausbrüche an der Anbohrstelle. Damit werden Nachbearbeitungen minimiert und die Prozesssicherheit erhöht. Sichern Sie sich den MetavCUT HSS Kurzbohrer Typ N für zuverlässige Metallbohrungen — bei Fragen zur Anwendung oder technischen Details berät METAV Werkzeuge gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40024-FDA Durchmesser: 2,4 mm Gesamtlänge: 57 mm Spirallänge: 30 mm Ausführung: kurz Typ: Typ N Material: HSS Farbe: schwarz Spitzenwinkel: 118° Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der Spiralbohrer von MetavCUT geeignet? Der MetavCUT Spiralbohrer Typ N aus HSS eignet sich vor allem für legierten und unlegierten Stahl sowie Gusseisen, Nichteisenmetalle und Kunststoffe und liefert bei diesen Werkstoffen saubere Bohrbilder. Kann der kurze HSS-Bohrer mit einer Handbohrmaschine verwendet werden? Ja, der kurze HSS-Bohrer ist für Handbohrmaschine geeignet; die geringe Auskraglänge erhöht dabei die Stabilität und verringert das Bruchrisiko bei normaler Bedienung. Was bedeutet die Norm DIN 338 für diesen Spiralbohrer? Die Norm DIN 338 bestätigt, dass dieser kurze Spiralbohrer mit Zylinderschaft den Standardmaßen und Ausführungsanforderungen entspricht, was einfache Austauschbarkeit und verlässliche Passgenauigkeit sicherstellt. Wie wähle ich den richtigen Spitzenwinkel für meine Anwendung? Der Standard-Spitzenwinkel von 118° beim MetavCUT Bohrer ist gut für allgemeine Metallbearbeitung geeignet; für härtere Materialien kann ein größerer Winkel sinnvoll sein, um die Standzeit zu erhöhen. Wohin kann ich mich wenden, wenn ich Beratung zu Einsatz oder Kompatibilität brauche? Bei Fragen zur Anwendung oder zur Auswahl des passenden Werkzeugs steht METAV Werkzeuge gern zur Verfügung: eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40024-FDA","sku":"40024-FDA","mpn":"40024-FDA","name":"Spiralbohrer 40024-FDA","description":"Spiralbohrer Typ N, kurz, HSS, Ø 2,4 mm, Spitzenwinkel 118°, schwarz, Norm DIN 338; kurzer HSS‑Bohrer für präzise Metallbohrungen in Handbohrmaschine und stationären Maschinen; hohe Stabilität durch reduzierte Auskraglänge.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"2,4 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"57 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"30 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der Spiralbohrer geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer Typ N von MetavCUT aus HSS eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und liefert bei diesen Werkstoffen saubere Bohrbilder."}},{"@type":"Question","name":"Kann der kurze HSS‑Bohrer mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurze HSS‑Spiralbohrer Typ N kann mit Handbohrmaschine verwendet werden; die geringe Auskraglänge erhöht die Stabilität und reduziert das Bruchrisiko bei normaler Bedienung."}},{"@type":"Question","name":"Was bedeutet die Norm DIN 338 für diesen Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Die Norm DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl und sichert Standardmaße, Kompatibilität mit Spannfuttern und verlässliche Toleranzen."}},{"@type":"Question","name":"Welchen Vorteil bietet die kurze Ausführung bei diesem Bohrer?","acceptedAnswer":{"@type":"Answer","text":"Die kurze Ausführung vermindert Schwingungen, erhöht die Parallelität beim Bohren und verringert das Risiko von Verbiegen, was reproduzierbare Ergebnisse und stabile Schnittführung ermöglicht."}},{"@type":"Question","name":"Wie beeinflusst der Spitzenwinkel die Anwendung?","acceptedAnswer":{"@type":"Answer","text":"Der Standard‑Spitzenwinkel 118° sorgt für guten Anbohrstart und erleichtert das Zentrieren auf gewölbten Oberflächen; bei härteren Werkstoffen kann ein größerer Winkel sinnvoll sein."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/40024-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Typ N"},{"@type":"Thing","name":"HSS Kurzbohrer"},{"@type":"Thing","name":"DIN 338 kurze Ausführung"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"Handbohrmaschine"},{"@type":"Thing","name":"Stabilität durch kurze Auskraglänge"}]}]}

€0.24

2.4mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Twist Drill – Type N extra short HSS‑G (Ø 2.4 mm, 118°, Bright Finished, DIN 1897) by MetavCUT A MetavCUT Twist Drill (Type N) for precise metal drilling with an extra‑short design ideal for hand Drilling Machines. Extra-short HSS-G for enhanced stability Ø 2.4 mm precision for fine metalwork 118° point angle for easy centring Cylindrical shank fits standard chucks Exceptional stability and faster metal machining The extra‑short ground HSS‑G construction delivers noticeably higher rigidity compared with standard lengths. This reduces vibration and breakage risk when working in tight setups and thin materials. Thanks to the ground geometry, machining can be performed up to 40% faster while requiring significantly less axial pressure, which lowers operator fatigue and improves repeatability on metal components. Ideal for confined spaces and hand drilling Designed with a total length of 38 mm and a spiral length of 12 mm, the compact format suits applications where access is limited or where a short overhang is required. The cylindrical shank fits conventional three‑jaw chucks used on hand Drilling Machines, offering universal compatibility and quick tool changes. Conformance to DIN 1897 guarantees dimensional reliability for workshop and maintenance use. Built for metal — versatile in material range As a Type N normal‑spiral bit, this tool is optimised for metalworking tasks. It performs well in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. The 118° point angle improves centring on slightly curved surfaces and helps when machining softer metals such as Aluminium, while the Type N spiral remains the preferred choice for metal drilling operations. Practical advantages for professionals and enthusiasts The short, robust geometry provides higher torsional resistance and a lower tendency to chatter, making it suitable for production, maintenance and committed hobbyists. The ground cutting edges allow economical regrinding and maintenance, extending service life. Note that the cylindrical shank is universally compatible, though under very high torque conditions a different shank form can offer improved anti‑slip behaviour. We recommend the MetavCUT extra‑short HSS‑G Twist Drill for precise metalworking and confined‑space applications — for further technical advice or to ensure the tool meets your specific requirements, METAV Werkzeuge provides competent consultation by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56024-FDA Diameter: 2.4 mm Total length: 38 mm Spiral length: 12 mm Point angle: 118° Type: Type N Execution: extra short Colour: Bright Finished Shank design: Cylindrical Material: HSS‑G Standard: DIN 1897 Application: Drills for metal Model series: Standard Line For Drilling Machine: Hand Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill primarily used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger metal diameters. Its extra‑short, ground design is easy to regrind and endures higher loads, making it suitable for robust metalworking tasks. Which three main drill types exist? There are three common drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling various metals.

€0.34

2.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill — Type N, 2.5 mm, 118° tip, HSS, short, Black, DIN 338 (MetavCUT) The Twist Drill Type N for drilling metal offers precise pilot-hole performance in drilling machines and hand drills, with a short design and HSS material for stability and durability. Short design increases drilling stability High-Speed Steel (HSS) suited for metal work 2.5 mm diameter for accurate pilot holes 118° tip improves centring on curved surfaces Precision and stability for demanding metal work A short, roll-formed Twist Drill delivers reduced overhang and significantly less bending during operation, which results in greater accuracy when producing pilot holes. The compact geometry means the tip remains concentric with the spindle even under load, lowering the risk of runout and improving hole quality. This construction is particularly valuable when working on components requiring tight tolerances, where consistent alignment and repeatable results are essential. Durable HSS material and industrial standard conformity Made from HSS (High Speed Steel) and manufactured to DIN 338, this short twist drill combines wear resistance with toughness for standard metalworking tasks. HSS provides a balance between hardness and elasticity, reducing breakage risk in diameters below 6 mm and enabling effective machining of alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics. Compliance with DIN 338 guarantees consistent dimensions and performance suited to both stationary and portable drilling equipment. Optimised geometry for reliable centring and chip evacuation The 118° point angle and Type N spiral form (normal twist) support controlled entry and moderate cutting forces, helping to centre the drill on slightly curved or uneven surfaces. The short spiral length and classic flute geometry aid chip evacuation in metal drilling, reducing heat buildup and improving tool life. For tasks where precise pilot holes are required before reaming or tapping, this geometry offers an effective compromise between fast penetration and stable guidance. Who benefits and typical applications Engineers, maintenance technicians and metalworkers who require reliable pilot drilling will value the combination of Type N geometry and short overall length. The bit is intended primarily for metal applications and is compatible with standard chuck-mounted drilling machines and many hand drills, making it suitable for workshop and on-site operations. MetavCUT designed this component for repeatable, everyday use where ease of regrinding and consistent performance matter. Choose MetavCUT’s Twist Drill for precision metal drilling and consult METAV Werkzeuge’s experts for tailored advice — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40025-FDA Diameter: 2.5 mm Spiral length: 30 mm Overall length: 57 mm Point angle: 118° Type: Type N Execution: short Material: HSS Norm: DIN 338 Colour: black Application: Drills for metal For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill, a Type N metal drill, is primarily used for machining metals and is effective on alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics; its short design and HSS material improve stability and reduce breakage risk in small diameters. Which three drill types are commonly distinguished? Commonly, drills are classified as metal drills, wood drills and masonry/concrete drills — the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks.

€0.27

2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

Twist Drill – Extra‑Long HSS‑G 2.5 mm, 135° (Bright Finished, Fully Ground, DIN 1869) by MetavCUT A Twist Drill in Extra‑Long execution designed for deep metal drilling with Drilling Machines and demanding workshop applications. Extra‑long design for deep boreholes 2.5 mm Diameter for precise pilot holes 135° Tip Angle for harder materials Fully Ground Shank for high concentricity Conforms to DIN 1869 for industrial use Faster metal machining with hardened HSS‑G for professionals The HSS‑G material and CNC grinding deliver a markedly sharper cutting geometry that enables up to 40% faster drilling with 50% less feed force compared to conventional HSS bits. This means less operator fatigue and higher throughput in serial production. The combination of HSS‑G and a ground flute geometry also produces cleaner holes in alloyed and unalloyed steels, reducing rework and saving machining time. Reach deeper, work cleaner — ideal for tight or hard‑to‑access spots Designed as an Extra‑Long bit (Total Length 140 mm, Spiral Length 95 mm), this drill lets users tackle deep or hard‑to‑reach bores without extensions. The extended working length reduces the need for additional tooling and ensures a straighter approach in recessed positions. For projects where accessibility is the limit, the longer flute and bright finished surface ease chip evacuation and visual alignment. Precision and stability for demanding materials The Fully Ground shank and precision flute grind result in excellent runout and centring, producing accurately sized holes and better surface quality. With a 135° tip angle, the geometry is optimised for harder workpiece materials such as stainless and tempered steels, shortening plunge time and improving control during initial entry. This characteristic makes the bit particularly suited to workshop environments using Drilling Machines where repeatability matters. Usage advice to maximise lifetime and hole quality For durable performance, use the drill with appropriate coolant and avoid excessive side loads; the ground design is precise but can be more brittle than rolled alternatives. Regrinding is straightforward due to the clear flank geometry, but for best results regrind at a specialist to preserve cutting angles. The product is primarily intended for metalworking tasks including casting, sintered metals, and hard plastics, delivering reliable results when used in stationary drilling setups. I recommend the MetavCUT Extra‑Long Twist Drill for precise, deep metal drilling — for personalised advice or supplementary technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 32025-FDA Diameter: 2.5 mm Total Length: 140 mm Spiral Length: 95 mm Tip Angle: 135° Execution: Extra long Shank Finish: Fully Ground Colour / Surface: Bright Finished Material: HSS‑G Standard: DIN 1869 Suitable For: Drilling Machine (Handheld use only with caution) Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill in HSS‑G is designed for demanding metalworking: it works well in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and Hard Plastics, providing clean, precise holes when used with appropriate machining parameters. Can the MetavCUT Twist Drill be used in a handheld drill? The MetavCUT Twist Drill is primarily intended for use in a Drilling Machine for best concentricity and cooling; handheld use is possible for light tasks but shorter drills or stationary setups are recommended to avoid breakage due to the ground geometry. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength materials and large drill diameters; its shape allows easy sharpening and it sustains greater loads, making it suitable for demanding metalwork and deep holes. Which three drill types exist? The three main drill types are Metal Drill (Metalbrörer), Wood Drill, and Stone/Concrete Drill. Why are Twist Drills pointed (split point)? Pointing reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and the required feed force while improving centre‑tracking in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood but guidance is poorer and results are less clean; however, such drills are easier to resharpen and have a lower self‑feeding tendency.

€1.72

2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

Spiralbohrer 2,5 mm (HSS-G, 135° Spitzenwinkel, extra lang, blank, DIN 1869) von MetavCUT Der Spiralbohrer 2,5 mm ist ein extra langer HSS-G Bohrer für tiefe Metallbohrungen mit geschliffener Geometrie und hoher Rundlaufgenauigkeit. Extra lange Ausführung für tiefe Bohrungen Geschliffene HSS-G Geometrie für saubere Löcher 135° Spitzenwinkel für härtere Werkstoffe Tieflochspirale erleichtert Spanabfuhr Für Handbohrmaschine und stationäre Maschinen geeignet Tiefes Bohren mit hoher Stabilität und Reichweite Dank der extra langen Gesamtlänge und der langen Arbeitslänge ermöglicht dieser Bohrer das Erzeugen tiefer Bohrungen ohne mehrfaches Aufbohren. Die integrierte Tieflochspirale sorgt für verbesserte Spanabfuhr, was insbesondere bei längeren Bohrungen in Metall die Standzeit erhöht. Für Anwender bedeutet das weniger Unterbrechungen, mehr Prozesssicherheit und eine effizientere Bearbeitung von schwer zugänglichen Stellen. Geschliffene HSS-Geometrie für präzise Ergebnisse Die geschliffene Ausführung (HSS-G) liefert sehr scharfe Schneidkanten und eine hohe Rundlaufgenauigkeit, wodurch sauberere Bohrlöcher erzielt werden. Diese Fertigungsart eignet sich besonders für anspruchsvolle Metallarbeiten, da der Bohrer im Vergleich zu gewalzten Ausführungen schneller eindringt und mit weniger Anpresskraft arbeitet. Bei stationärem Einsatz und geeigneter Kühlung werden die Stärken der geschliffenen Geometrie voll ausgeschöpft. Vielseitiger Einsatz in Metall und Kunststoffen Der Bohrer ist konzipiert für das Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff. Mit einem Spitzenwinkel von 135° kann er auch in härteren Werkstoffen effizient anbohren, wodurch die Anbohrzeit reduziert wird. Für Alltagswerkstatt, Montage und handgeführte Bohrarbeiten bietet dieser Bohrer damit eine zuverlässige Kombination aus Leistungsfähigkeit und Vielseitigkeit. Praxisnahe Hinweise für sicheren und langlebigen Einsatz Für optimale Ergebnisse empfiehlt es sich, bei Bedarf mit einem Zentrierbohrer anzupunken und während längerer Bohrungen Kühlmittel einzusetzen, um die Wärmebelastung zu reduzieren. Die Nutzung in stationären Bohrmaschinen minimiert das Bruchrisiko geschliffener Werkzeuge; bei Handbohrmaschinen sind gleichmäßiger Vorschub und moderate Drehzahlen wichtig. Bei Unsicherheiten bietet METAV Werkzeuge fachkundige Beratung für die richtige Anwendung und Auswahl. Starke Empfehlung: Den HSS-G Bohrer von MetavCUT für präzise, extra tiefe Metallbohrungen wählen — bei Fragen zur Anwendung oder technischen Details steht METAV Werkzeuge gern per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 zur Verfügung. Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 33025-FDA Durchmesser: 2,5 mm Material: HSS-G Spitzenwinkel: 135° Ausführung: extra lang Spiralänge: 120 mm Gesamtlänge: 180 mm Farbe: blank Schaftausführung: geschliffen Norm: DIN 1869 Modellserie: Standard Line Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer 2,5 mm von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; bei Edelstahl empfiehlt sich angepasste Schnittgeschwindigkeit und Kühlung, um Überhitzung zu vermeiden. Kann der Spiralbohrer 2,5 mm in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer 2,5 mm von MetavCUT ist für den Einsatz in Handbohrmaschinen geeignet; gleichmäßiger Vorschub und kontrollierte Drehzahl erhöhen die Standzeit. Warum ist der geschliffene Schaft beim Spiralbohrer wichtig? Die geschliffene Schaftausführung beim Spiralbohrer von MetavCUT sorgt für hohe Rundlaufgenauigkeit und präzisere Bohrbilder, was besonders bei Metallbohrungen Vorteile bringt. Wann sollte ich Kühlmittel verwenden bei diesem Spiralbohrer? Bei längeren oder tieferen Bohrungen in Stahl oder Guss empfiehlt MetavCUT die Verwendung von Kühlmittel, um Wärme zu reduzieren und die Lebensdauer des Bohrers zu verlängern. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#33025-FDA","sku":"33025-FDA","mpn":"33025-FDA","name":"Spiralbohrer 2,5 mm (33025-FDA)","description":"Spiralbohrer 2,5 mm, HSS-G, 135° Spitzenwinkel, extra lang, blank, DIN 1869; Geschliffene Geometrie für präzise Bohrbilder; Tieflochspirale zur verbesserten Spanabfuhr; Geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff; Einsatz in Handbohrmaschine und stationären Maschinen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"33025-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"2,5 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Spiralänge","value":"120 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"180 mm"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Herstelleradresse","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}],"brand":null},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer 2,5 mm von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 2,5 mm von MetavCUT mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; für Edelstahl empfiehlt MetavCUT angepasste Schnittgeschwindigkeit und Kühlung, um Überhitzung zu vermeiden."}},{"@type":"Question","name":"Kann der Spiralbohrer 2,5 mm in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 2,5 mm von MetavCUT ist für den Einsatz in Handbohrmaschinen geeignet; gleichmäßiger Vorschub und kontrollierte Drehzahl erhöhen die Standzeit."}},{"@type":"Question","name":"Warum ist die geschliffene Schaftausführung beim Spiralbohrer wichtig?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Schaftausführung beim Spiralbohrer 2,5 mm von MetavCUT sorgt für hohe Rundlaufgenauigkeit und präzisere Bohrbilder, was insbesondere bei Metallbohrungen Vorteile bringt."}},{"@type":"Question","name":"Wann sollte Kühlmittel bei diesem Spiralbohrer verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Bei längeren oder tieferen Bohrungen in Stahl oder Guss empfiehlt MetavCUT die Verwendung von Kühlmittel, um Wärme zu reduzieren und die Lebensdauer des Bohrers zu verlängern."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/product/33025-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Serie Standard Line"},{"@type":"Thing","name":"HSS-G geschliffene Geometrie"},{"@type":"Thing","name":"Tieflochspirale für extra tiefe Bohrungen"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"Handbohrmaschine geeignet"},{"@type":"Thing","name":"DIN 1869 Norm"}]}]}

€2.27

2.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT

Twist Drill Spiralbohrer – Twist Drill, 2.5 mm Ø, 135° tip, extra long, bright finished, fully ground, HSS‑G (DIN 1869) A Twist Drill Spiralbohrer designed for deep, precise metal drilling in Drilling Machines and hand-held drills. Extra-long design for deep holes HSS‑G fully ground for faster, precise drilling 135° tip angle for harder materials Conforms to DIN 1869 for demanding applications High-performance material for demanding Metalwork HSS‑G construction delivers a combination of hardness and cutting-edge geometry that benefits metalworking tasks. The fully ground flute geometry provides sharp cutting edges and high runout accuracy, which results in cleaner holes and less rework. According to internal data, the ground HSS design can enable up to 40% faster drilling while requiring approximately 50% less feed force compared with conventional rolled HSS bits, improving efficiency in production and workshop environments. Built for deep holes and tough materials The extra long overall length of 225 mm with a spiral length of 150 mm makes this Twist Drill especially suitable when access is limited or when long through-holes are needed. The 135° tip angle is optimised for harder materials — it reduces initial biting and shortens approach time into the workpiece, which is advantageous when drilling stainless steel and other high-strength alloys up to 1000 N/mm². Precision geometry and recommended usage The fully ground (CNC‑ground) flute and shank ensure high concentricity and precise hole quality, which is particularly important for metal and hard-plastic applications. Ground Twist Drills are sharper and generally produce superior surface finish; however, they can be relatively more brittle than rolled types. For best results, use the MetavCUT Twist Drill in stationary Drilling Machines with appropriate cooling and controlled feed to extend tool life. Typical applications and target users This Twist Drill is intended for professional machinists, maintenance technicians and metalworking shops that require reliable deep-hole performance. It is suitable for legierte und unlegierte Stahl (alloyed and unalloyed steel), Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and hard plastics. The Extra Long design supports drilling operations where standard-length bits are insufficient, while the DIN 1869 specification assures compatibility with industrial production standards. Highly recommended: Choose the MetavCUT Twist Drill for deep, precise metal drilling — contact METAV Werkzeuge for expert technical advice via email info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 34025-FDA Diameter: 2.5 mm Tip angle: 135° Overall length: 225 mm Spiral length: 150 mm Execution: extra long Colour/Finish: bright finished Shank execution: fully ground Material: HSS‑G Standard: DIN 1869 For machine: Drilling Machine / Hand Drills Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill suitable for stainless steel and high-strength alloys? The MetavCUT Twist Drill is designed to machine materials such as stainless steel and other high-strength alloys up to around 1000 N/mm²; its 135° tip and HSS‑G ground geometry help reduce drilling forces and improve centring in tougher materials. Can the MetavCUT Twist Drill be used in a hand-held drill? The MetavCUT Twist Drill can be used in hand-held drills for lighter tasks, but optimal performance and tool life are achieved in a stationary Drilling Machine with adequate clamping and coolant due to the Extra Long design and ground geometry. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its ground geometry is easy to re‑sharpen and resists heavier loads, making it suitable for demanding metal drilling. Which three drill types exist? The three main drill categories are metal drills, wood drills, and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the drill point; by re‑pointing the tip, frictional forces are substantially lowered so that less feed force is needed and the drill centres more accurately in the workpiece. Can you drill wood with a Twist Drill? A metal Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated wood drills; metal bits are easier to re‑sharpen and have less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is typically made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE is automatically superior to HSS is not universally correct; assess the working conditions to determine whether the higher cost of HSSE is justified for your application.

€2.79

2.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Twist Drill — Type N extra short, Ø 2.5 mm, 118° tip, Bright Finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill is an extra short Type N drill designed for metalworking with a 2.5 mm Diameter and a 118° Tip Angle, suitable for Hand Drilling Machines and compact operations. Extra short design for high stability and tight spaces Ground HSS‑G for up to 40% faster drilling Cylindrical Shank for universal chuck compatibility Conforms to DIN 1897 for consistent quality Optimised for metal drilling and thin sheet applications Precise metalworking with higher feed efficiency The extra short design of this Twist Drill delivers noticeably improved Stability and reduced breakage risk when compared with standard-length tools. The Ground HSS‑G cutting geometry reduces required Feed Force and increases Penetration Speed, so holes in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals are produced more reliably. For users who require controlled drilling in limited access areas, the shortened Overall Length improves handling and reduces vibration while maintaining concentricity. Material advantages and drilling behaviour Manufactured from HSS‑G, the tool offers robust wear resistance and edge retention for demanding metal operations. The 118° Tip Angle favours softer metals and provides easier centring on curved surfaces, while the classic Type N flute geometry is optimised for chip evacuation in metalworking. The Cylindrical Shank ensures universal compatibility with standard three‑jaw chucks, although users should note increased slippage risk under very high torque compared with hex or triangular shanks. Ideal applications and target users This drill is aimed at professionals and hobbyists working with sheet metal, profile sections and machine components where compact tooling and precise results matter. It excels in Hand Drilling Machine use and is suitable for drilling into Steel, Cast Steel, Sintered Iron and various Hard Plastics. For projects requiring repeatable and centred holes in thin materials or confined setups, the shortened geometry provides a clear advantage and reduces the chance of deflection. Handling tips and what makes this drill stand out To achieve best results, use moderate cutting speeds and steady feed; lubrication is recommended for alloyed steels to extend tool life. The Extra Short format reduces bending moments and is therefore less prone to runout, while the DIN 1897 conformity guarantees dimensional and geometric consistency. The product’s Bright Finished surface supports easy identification and corrosion resistance during storage. For precision metal drilling, choose the MetavCUT Twist Drill Type N with 2.5 mm Diameter and extra short design — METAV Werkzeuge provides expert technical advice and support: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Twist Drill / Spiralbohrer) Brand: MetavCUT SKU: 56025-FDA Diameter: 2.5 mm Tip Angle: 118° Type: Type N Material: HSS‑G Execution: Extra short Colour / Finish: Bright Finished Shank Design: Cylindrical Spiral Length: 14 mm Overall Length: 43 mm Series: Standard Line Application: Drills for Metal For use with: Drilling Machine (Hand Drilling Machine) Standard: DIN 1897 Additional note: Extra short length increases stability and is suitable for thin materials and tight spaces Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high‑strength workpieces and larger hole diameters; its robust geometry and grind make it suitable for alloyed and unalloyed steels, cast materials and hard plastics while resisting higher loads. Which three drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill Type N belongs to the Metal Drill category and is tailored to metalworking tasks. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑edge at the tip of the Twist Drill, which lowers friction and required feed forces while improving centring accuracy in the Workpiece. Can a metal Twist Drill be used for wood? A Metal Drill can be used in Wood, but guidance and finish are usually inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most used? A full‑bore operation is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.

€0.48

2.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT

Twist Drill — fully ground HSS‑G, 2.5 mm, 118°, hexagonal shank, silver, DIN 338, MetavCUT The Twist Drill is a fully ground HSS‑G drill bit designed for precision metalworking on drilling machines, offering a 2.5 mm diameter and a 118° point angle for reliable centring and clean holes. Fully ground HSS‑G for precise metal holes Hexagonal shank for form‑fit torque transfer DIN 338 compliant short twist drill 118° point angle improves centring on curves 80 mm overall length for versatile reach Precision and material: why fully ground HSS‑G matters A fully ground HSS‑G construction ensures very sharp cutting edges and high runout accuracy, which produces cleaner, more precise holes in metals. For users working with alloyed or unalloyed steel, cast steel, and non‑ferrous metals, the combination of ground geometry and HSS‑G material delivers faster drilling and reduced required feed force compared with roll‑formed variants. For the occasional user, this means fewer torn edges and less rework; for professionals, it supports higher reproducibility on production parts. Shaft design and practical handling benefits The hexagonal shank (hexagon shaft) enables secure engagement in quick‑change holders and many cordless drivers without slipping, improving torque transfer and reducing downtime for bit changes. Because the shank is form‑fitting, operators experience more consistent cutting behavior when using hand drills or drilling machines. This design choice is particularly useful when working on jobs that require rapid tool swaps and firm rotational control. Geometry and recommended applications for cleaner holes With a 118° point angle, this twist drill penetrates softer metals and aluminium more easily and centres well on slightly curved surfaces. The geometry also supports typical metalworking tasks where entry burr and hole roundness are important. For drilling in harder materials or when drilling deep, consider matching coolant use and reduced speeds to prolong tool life and avoid brittle breakage typical of very sharp ground drills. Versatility and intended users This bit suits metalworkers, maintenance technicians, and workshop professionals who require reliable, repeatable results in light‑to‑medium metal drilling. The 2.5 mm diameter and 80 mm overall length provide a balance between reach and rigidity, making the bit practical for general fabrication and repair work. Users seeking simple, serviceable tooling will appreciate that the bit can be re‑sharpened and is compatible with standard holders and many drill chucks. How the DIN standard and grinding process support quality Conforming to DIN 338 signals that the geometry and dimensions meet established standards for short twist drills with cylindrical shanks. The term "fully ground" means the flute geometry is produced by CNC grinding rather than roll forming, which typically results in superior concentricity and sharper edges. For customers unfamiliar with these terms: grinding produces a more accurate cutting profile, while DIN 338 guarantees standardized dimensions and interchangeability. Choose MetavCUT’s Twist Drill in fully ground HSS‑G for demanding metalwork — for detailed technical advice or help selecting the right diameter and geometry, contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 57025-FDA Diameter: 2.5 mm Point angle: 118° Execution / Finish: fully ground (geschliffen) Colour: silver Intended for: Drilling Machine (Handbohrmaschine) Spiral length: 30 mm Overall length: 80 mm Shank design: hexagonal (sechskant) Series: Standard Line Application: Drills for metal (Bohrer für Metall) Material: HSS‑G Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which brand supplies this bit? The MetavCUT Twist Drill (Twist Drill for Drilling Machine) is primarily used for machining high‑strength materials and larger drill diameters; its ground flute geometry makes it easier to sharpen and able to withstand greater loads, delivering precise, clean holes in metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit among them? The main drill categories are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for steels and other metals rather than masonry or specialised wood bits. Why are Twist Drills pointed (why is the tip ground)? The tip of the Twist Drill by MetavCUT is sharpened to reduce the chisel edge at the centre; this lowers friction and required feed forces while improving self‑centring in the workpiece for a cleaner start and better hole accuracy. Can a metal Twist Drill be used in wood? A MetavCUT metal Twist Drill can be used in wood, but it offers less guidance and a rougher finish than dedicated wood bits; however, it is easier to resharpen and tends to have a lower tendency to self‑feed compared with some wood‑specific designs. For which drilling depths is the Twist Drill most commonly used? A through hole produced with a Twist Drill is common up to a diameter of about 20 mm and drilling depths up to 100 mm; in such ranges the Twist Drill is the most frequently used tool for metal removal. Is HSS or HSSE better for my application? Choosing between HSS and HSSE depends on working conditions; the general belief that HSSE is always superior to HSS is incorrect. Assess whether your operating conditions justify the higher cost of HSSE before deciding; the MetavCUT Twist Drill in HSS‑G offers a strong balance of performance and economy for many metalworking tasks.

€0.95

2.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT

Twist Drill — Short Type N, 2.5 mm, 118°, TiN-coated HSS-G (DIN 338) by MetavCUT The Twist Drill is a short Type N metalworking drill designed for precision drilling in alloys and steels with a 2.5 mm diameter and a 118° point angle. Short design for greater stability and precision TiN-coated surface for extended tool life Fully ground HSS-G for faster cutting and clean holes Conforms to DIN 338 for consistent quality Optimised for Drilling Machine applications Precision and stability for demanding metalwork The short geometry of this Twist Drill reduces the unsupported overhang, resulting in higher stability and less tendency to deflect under load. This design advantage makes it particularly suitable for precision work and for drilling in hard materials such as alloyed steel and tempered castings. The 118° point angle supports accurate centring on slightly convex surfaces and improves initial penetration, which is beneficial when accurate positioning is critical. Longer lifetime through coating and material A TiN-coated surface combined with HSS-G substrate reduces friction and wear during cutting, increasing service life under metalworking conditions. Titanium nitride lowers adhesion of chips and heat buildup, while the fully ground HSS geometry delivers sharper cutting edges and improved chip evacuation. Together these properties help maintain performance over many holes when used with appropriate cooling. Faster drilling with lower feed force The ground flute geometry of this short Twist Drill enables up to 40% faster drilling and requires significantly less axial force compared with conventional HSS types. This leads to smoother operation on both stationary and portable drilling machines and reduces operator fatigue. For best results, pairing the drill with suitable coolant or cutting fluid minimises thermal stress and preserves cutting geometry. Application scope and recommended usage Designed to meet DIN 338, this short Type N Twist Drill is intended primarily for metalworking tasks such as drilling in alloy and unalloyed steels, cast iron, sintered iron, non-ferrous metals and hard plastics. Use in a drilling machine with correct speeds and lubrication is advised. Because the drill is ground rather than rolled, expect very precise hole quality and good concentricity, while taking care to avoid excessive impact loading to prevent brittle fracture. Strongly recommended: choose the MetavCUT Twist Drill for professional metalworking tasks and contact METAV Werkzeuge for tailored technical support — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 46025-FDA Diameter: 2.5 mm Overall length: 57 mm Spiral length: 30 mm Point angle: 118° Type: Type N Execution: Short Shaft design: Fully ground Material: HSS-G Coating/Colour: TiN-coated Application: Drills for metal / Drilling Machine Model series: Standard Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is used mainly for drilling metal; it is especially suited to alloyed and unalloyed steel, cast iron, sintered iron, non-ferrous metals and hard plastics. Its short construction and HSS-G substrate make it appropriate for precise metalworking where stability and hole quality are priorities. Which three drill types exist and how does the Twist Drill compare? The three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking, offering sharper ground geometry and TiN coating compared with general-purpose wood or masonry drills.

€0.49

2.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT

Spiralbohrer HSS-G 2,5 mm • 118° Spitzenwinkel • lang • blank • DIN 340 • MetavCUT Standard Line Der Spiralbohrer HSS-G 2,5 mm ist ein lang ausgeführter Bohrer für Metall nach DIN 340, konzipiert für präzise, tiefere Bohrungen in legierten und unlegierten Stählen sowie NE-Metallen. HSS-G geschliffen für präzise Bohrbilder Lange Ausführung nach DIN 340 für tiefe Löcher 2,5 mm Durchmesser ideal für Werkstattarbeiten 118° Spitzenwinkel erleichtert das Zentrieren Geschliffener Schaft für hohen Rundlauf Schnellere Bohrfortschritte durch geschliffene HSS-Geometrie Die HSS-G Ausführung bietet eine geschliffene Spiralgeometrie, die ein scharfes Schnittbild und hohe Rundlaufgenauigkeit erzeugt. Durch den CNC-Schliff wird die Spanabfuhr optimiert, wodurch das Bohren in Stahl und Guss deutlich effizienter wird. Anwender profitieren von bis zu 40 % schnellerer Vorschubgeschwindigkeit und verlangsamtem Werkzeugverschleiß, was besonders bei häufiger Nutzung in der Werkstatt Zeit spart und die Produktivität erhöht. Tiefbohrungen sicher und zugänglich ausführen Dank der langen Ausführung nach DIN 340 mit einer Gesamtlänge von 95 mm und einer Spirallänge von 62 mm eignet sich dieses Werkzeug besonders für tiefe Bohrungen oder schwer zugängliche Bohrstellen. Die verlängerte Arbeitslänge reduziert das Nacharbeiten und ermöglicht das Erreichen von Innenbereichen ohne zusätzliche Aufbohrschritte. Dabei bleibt das Bohrbild trotz Länge präzise, wenn mit geeigneter Kühlung und konstanter Vorschubkraft gearbeitet wird. Vielseitiger Einsatz in Werkstatt und Montage Im Standard-Bereich von 2,0 mm bis 13,0 mm ist der 2,5 mm Durchmesser ideal für allgemeine Werkstattarbeiten, Montageaufgaben und DIY-Projekte. Der Bohrer ist für Handbohrmaschine und stationäre Säulenmaschinen geeignet und bearbeitet dünne bis mittlere Bleche, Profile sowie Flachstahl zuverlässig. Für besonders präzise Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um ein Wandern auf der Oberfläche zu vermeiden. Anwendungshinweise für saubere und langlebige Ergebnisse Bei der Arbeit mit dem geschliffenen Spiralbohrer sollte Kühlung eingesetzt werden, insbesondere bei Dauerbelastung oder beim Bohren in hartem Material. Der 118° Spitzenwinkel unterstützt das Zentrieren und eignet sich gut für die beschriebenen Materialien; für sehr weiche Werkstoffe kann ein flacherer Winkel sinnvoll sein. Zur Vermeidung von Bruchgefahr ist bei langen Bohrern eine ruhige Spannaufnahme und moderater Vorschub empfehlenswert, bei Bedarf stationär arbeiten und Späne regelmäßig entfernen. Vertrauen Sie auf den MetavCUT HSS-G Spiralbohrer für präzise Tiefbohrungen; bei Unsicherheit oder technischen Fragen berät METAV Werkzeuge gern persönlich per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer HSS-G 2,5 mm, lang, geschliffen Marke: MetavCUT SKU: 53025-FDA Material: HSS-G Norm: DIN 340 Durchmesser: 2,5 mm Spitzenwinkel: 118° Gesamtlänge: 95 mm Spirallänge: 62 mm Schaft Ausführung: geschliffen Farbe: blank Ausführung: lang Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Werkstoffe lassen sich mit dem Spiralbohrer MetavCUT HSS-G 2,5 mm bearbeiten? Der MetavCUT HSS-G Spiralbohrer 2,5 mm ist ausgelegt für legierten und unlegierten Stahl, Gusswerkstoffe, Sintereisen sowie Nichteisenmetalle und harte Kunststoffe; bei härteren Werkstoffen empfiehlt sich Kühlung und kontrollierter Vorschub. Ist der Spiralbohrer MetavCUT HSS-G 2,5 mm für Handbohrmaschinen geeignet? Ja, der MetavCUT HSS-G Spiralbohrer 2,5 mm passt für Handbohrmaschine und eignet sich für gängige Werkstattanwendungen, wobei bei langen, präzisen Bohrungen eine stationäre Maschine Vorteile bei Rundlauf und Sicherheit bietet. Wie tief können mit dem Spiralbohrer MetavCUT HSS-G 2,5 mm gebohrt werden? Die lange Ausführung nach DIN 340 mit 62 mm Spirallänge erlaubt deutlich tiefere Bohrungen als Standardausführungen; für sehr tiefe oder kritische Bohrungen empfiehlt sich schrittweises Arbeiten und gegebenenfalls Vorbohren. Brauche ich besondere Kühlung oder Schmierung für den MetavCUT HSS-G Spiralbohrer 2,5 mm? Bei Dauerbetrieb oder beim Bohren in zähen Werkstoffen sorgt Kühlung für längere Standzeiten und bessere Spanabfuhr; der MetavCUT HSS-G Spiralbohrer profitiert von moderater Kühlschmierstoffzufuhr, besonders bei höheren Drehzahlen. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#53025-FDA","sku":"53025-FDA","mpn":"53025-FDA","name":"Spiralbohrer 53025-FDA","description":"Spiralbohrer HSS-G 2,5 mm, lang, blank, DIN 340; geschliffener Schaft für hohe Rundlaufgenauigkeit; Gesamtlänge 95 mm, Spirallänge 62 mm; 118° Spitzenwinkel; Ideal für präzise Tiefbohrungen in legierten und unlegierten Stählen sowie Nichteisenmetallen; Hersteller MetavCUT Standard Line.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer HSS-G 2,5 mm, lang, geschliffen"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Norm","value":"DIN 340"},{"@type":"PropertyValue","name":"Durchmesser","value":"2,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"95 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"62 mm"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"lang"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Werkstoffe lassen sich mit dem Spiralbohrer MetavCUT HSS-G 2,5 mm bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT HSS-G 2,5 mm eignet sich für legierten und unlegierten Stahl, Gusswerkstoffe, Sintereisen, Nichteisenmetalle und harte Kunststoffe; bei härteren Werkstoffen wird Kühlung und kontrollierter Vorschub empfohlen."}},{"@type":"Question","name":"Ist der Spiralbohrer MetavCUT HSS-G 2,5 mm für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT HSS-G 2,5 mm kann in Handbohrmaschine eingesetzt werden; für lange, präzise Bohrungen bietet eine stationäre Maschine Vorteile bei Rundlauf und Sicherheit."}},{"@type":"Question","name":"Wie tief können mit dem Spiralbohrer MetavCUT HSS-G 2,5 mm gebohrt werden?","acceptedAnswer":{"@type":"Answer","text":"Die lange Ausführung nach DIN 340 mit einer Spirallänge von 62 mm erlaubt deutlich tiefere Bohrungen als Standardausführungen; für sehr tiefe oder kritische Bohrungen empfiehlt sich schrittweises Arbeiten und gegebenenfalls Vorbohren."}},{"@type":"Question","name":"Brauche ich besondere Kühlung oder Schmierung für den MetavCUT HSS-G Spiralbohrer 2,5 mm?","acceptedAnswer":{"@type":"Answer","text":"Bei Dauerbetrieb oder beim Bohren in zähen Werkstoffen verlängert Kühlung die Standzeit und verbessert die Spanabfuhr; der MetavCUT HSS-G Spiralbohrer profitiert von moderater Kühlschmierstoffzufuhr, besonders bei höheren Drehzahlen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-53025-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS-G"},{"@type":"Thing","name":"DIN 340 lange Ausführung"},{"@type":"Thing","name":"MetavCUT Standard Line"}],"mentions":[{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"118° Spitzenwinkel"},{"@type":"Thing","name":"Tiefbohrungen bis Spirallänge 62 mm"},{"@type":"Thing","name":"Kühlung empfohlen bei Dauerbetrieb"}]}]}

€0.71

2.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill — Type N short HSS drill, 2.6 mm, 118° tip, black, DIN 338 The Twist Drill Type N is a short HSS metal drill designed for precise work in Drilling Machines and hand-held drills, ideal for accurate holes in steels and non-ferrous metals. Short HSS construction for high stability 2.6 mm diameter for fine, precise holes 118° tip for reliable centring on curved surfaces Conforms to DIN 338 for consistent quality Suitable for Drilling Machine use and metalworking Precise metal drilling with reduced breakage risk Short HSS Twist Drills deliver increased stiffness compared with longer variants, which reduces bending and improves hole accuracy. The 2.6 mm diameter combined with a total length of 57 mm and a spiral length of 30 mm gives a compact overhang that minimises vibration and deflection. For tasks requiring exact hole position—such as assembly, jigs or precision fixtures—this drill provides the mechanical advantage of a short design and the wear resistance of high-speed steel. Better centring and cutting behaviour for everyday workshop use The 118° tip angle of this Twist Drill helps with quick centring on flat and slightly curved surfaces and lowers the tendency to wander during start-up. This characteristic makes the tool particularly suitable when drilling softer steels, aluminium and common non-ferrous alloys. Users benefit from easier handling and more predictable entry behaviour, which reduces rework and speeds up repetitive operations. Designed for metalworkers and precision users Engineered as a classic metalworking solution, the Type N Twist Drill is aimed at professionals and skilled hobbyists who require reliable results with minimal tool deflection. The Type N normal spiral geometry is optimised for machining metal and provides an effective chip evacuation path when paired with appropriate cutting speeds and coolant. This drill is recommended for operations where repeatability and tool life are important. Standard conformity and manufacturing advantages Conforming to DIN 338, the short Twist Drill follows established dimensional and manufacturing standards, ensuring interchangeability and predictable performance. The roll-walzen (rolled) HSS production process improves elasticity and decreases breakage risk for small diameters, making this drill a dependable choice for drilling tasks up to the typical limits for high-speed steel in workshop environments. Strong recommendation: For precision metal drilling, choose the MetavCUT Twist Drill Type N and consult METAV Werkzeuge for customised advice — they provide comprehensive technical support and ordering assistance via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40026-FDA Diameter: 2.6 mm Spiral length: 30 mm Total length: 57 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: Short Colour: Black For: Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill mainly used? The MetavCUT Twist Drill Type N is mainly used for machining high-strength materials and larger hole diameters in metalworking. Its form allows straightforward sharpening and it withstands higher loads, making it suitable for drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and masonry/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill category designed for metalworking tasks.

€0.27

2.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT

Twist Drill — Type N extra-short HSS‑G drill, Ø 2.6 mm, 118° point, bright finished, cylindrical shank, DIN 1897 The Twist Drill Type N is an extra-short HSS‑G drill bit designed for precise metalworking with hand Drilling Machines and tight-space applications. Extra-short design for higher stability HSS‑G material for faster cutting 118° point angle for improved centring Cylindrical shank fits standard three-jaw chucks Conforms to DIN 1897 for consistent dimensions Precision and stability for metalworking that matters This extra-short Twist Drill from MetavCUT is engineered to reduce flex and breakage when working with alloyed and unalloyed steels. The shortened overall length and reduced flute/working length increase stability and torsional resistance, which directly lowers the risk of snap-off during manual drilling. For users who require predictable, repeatable holes in components, the compact geometry delivers a noticeable increase in control and operator confidence. Easier centring and reliable start on curved or soft surfaces With a 118° point angle, the Twist Drill provides gentler penetration and improved centring on softer materials such as aluminium or wood-like substrates when used incidentally. This geometry reduces the tendency to wander on crowned or irregular surfaces, so holes start cleanly with less hand correction. The result is a neater entry hole and less rework, which is particularly valuable for time-sensitive fabrication or assembly tasks. Faster cutting with lower feed force thanks to HSS‑G The HSS‑G construction of this MetavCUT Twist Drill combines high-speed steel properties with ground geometry to enable up to 40% faster drilling and approximately 50% lower feed force compared with conventional HSS bits. This means less operator fatigue on hand-held machines and reduced demands on light-duty motor units, while maintaining performance in materials such as cast iron, tempered steel, non‑ferrous metals and engineering plastics. Universal compatibility and practical use cases Equipped with a cylindrical shank, the bit is universally compatible with standard three-jaw chucks, making it suitable for most bench and hand Drilling Machines. The DIN 1897 designation ensures dimensional conformity for consistent clamping and interchangeability. This Twist Drill is particularly suitable for thin-walled constructions like sheet metal, profiles and assemblies where space constraints demand a short tool that still offers robust cutting action. Who benefits from this Twist Drill Workshop professionals and maintenance technicians who need a reliable, compact metal drill for hand-held or angle drilling will value the MetavCUT extra-short Twist Drill. It is designed for users who prioritise tool stability, quick chip evacuation and consistent hole quality over long overhangs. The product is also suitable for smaller production runs and repair jobs where machine access is limited. Strong recommendation: Choose the MetavCUT extra-short Twist Drill Type N for demanding metal drilling tasks and contact METAV Werkzeuge for expert guidance — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56026-FDA Diameter: 2.6 mm Point Angle: 118° Type: Type N Material: HSS‑G Standard: DIN 1897 Execution: Extra short Colour: Bright finished Shank Design: Cylindrical Spiral Length: 14 mm Total Length: 43 mm Intended For: Drills for metal / Hand Drilling Machine Model Series: Standard Line Shaft Finish: Zylinder (Cylindrical shank) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT used? The MetavCUT Twist Drill Type N is primarily used for drilling in high‑strength materials and larger diameters; its extra-short form is ideal for stable operation and for machining alloyed and unalloyed steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Which three drill types are commonly distinguished? Three common drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category designed for metalworking applications. Why are Twist Drills sharpened at the tip? The tip sharpening of the MetavCUT Twist Drill reduces the cross‑cut at the tip, lowering friction and therefore the required feed force, while improving centring of the tip in the workpiece. Can the MetavCUT Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; however, metal drills are easier to resharpen and show less self‑feed tendency. At which drilling depths is the Twist Drill most commonly used? Spiral or Twist Drills are most commonly used for through drilling; for diameter ranges up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the prevalent tool for conventional drilling tasks. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is incorrect; evaluate working conditions carefully to decide whether the higher cost of HSSE is justified for your MetavCUT Twist Drill application.

€0.48

2.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT

Twist Drill — Type N, Ø 2.75 mm, 118° tip, short, Black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N short is a precision HSS metal drilling bit for Drilling Machines and Hand Drills, designed for accurate holes in steel and non‑ferrous metals. Precision Ø 2.75 mm for fine metalwork 118° tip for improved centring on curved surfaces Short HSS design for higher Stability and reduced runout Conforms to DIN 338 for consistent Quality Suitable for Drilling Machines and Hand Drills Engineered for stability and reliable hole quality The HSS construction of this Twist Drill offers a blend of hardness and toughness that suits routine metalworking. The short execution reduces overhang and minimizes bending, resulting in higher Precision for critical holes. For workshop environments where repeatability matters, the shorter flute length improves tool life and lowers the risk of breakage when drilling diameters below typical thresholds. Tip geometry and spiral profile for dependable centring With a 118° tip angle and the classic Type N normal spiral, this drill bit enters softer and medium‑hard materials with reliable centring and predictable chip formation. The geometry is particularly helpful when starting holes on slightly curved surfaces or when a fast penetration without excessive contact is required. Users of Drilling Machines or Hand Drills benefit from predictable behaviour during feed, especially on alloyed and unalloyed steels. Compliance with standards and easy maintenance Manufactured to DIN 338 for short cylindrical‑shank twist drills, this bit follows established tolerances for length and shank dimensions. The HSS material also allows straightforward re‑sharpening, which means workshops can restore cutting edges economically without sacrificing concentricity. For customers who want consistent batch quality and traceable specifications, the DIN classification provides clear guidance on selection and replacement. Practical application and recommended users This Twist Drill from MetavCUT is aimed at professional workshops, maintenance technicians and advanced hobbyists who require dependable metal drilling performance. It is best used for steel, cast iron, non‑ferrous metals and certain plastics where the Type N spiral performs well. The short design is beneficial for setups where rigidity is essential, such as on drill presses or when using small hand drills that require stable, repeatable results. For precision metalworking tasks the MetavCUT Twist Drill Type N short is recommended — METAV Werkzeuge provides expert technical support and can advise on suitability and additional specifications: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400275-FDA Diameter: 2.75 mm Spiral length: 33 mm Overall length: 61 mm Tip angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Application: Drills for metal Suitable for: Drilling Machine, Hand Drill Colour: black Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The Twist Drill from MetavCUT, Type N, is primarily applied when machining high‑strength materials and larger drill diameters in metalworking. This form is easy to re‑grind and withstands higher loads, making it suitable for demanding workshop and industrial applications. Which 3 drill types are there? There are three main drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for steels and similar materials.

€0.27

Filter products