Twist Drill (Type N) — Short, HSS‑G, Ø 5.25 mm, 135° The Twist Drill (Type N) is a short HSS‑G metal drill designed for Drilling Machines, offering high stability and precise holes in hard materials. Short design for improved stability and precision Ø 5.25 mm suited for metal drilling tasks 135° tip for reduced breakthrough in hard metals Fully ground shank for high runout accuracy Conforms to DIN 338 for short twist drills Precision drilling with reduced feed forces and faster progress This short HSS‑G cutter delivers a measurable performance advantage when working with demanding materials. Thanks to the ground geometry, drilling can be completed up to 40% faster while requiring around 50% less feed force, which reduces operator effort and wear on hand and bench machines. The 135° point angle improves entry into stainless and hardened steels, shortening the initial bite and minimising chatter for a cleaner, more reliable hole. Stable design for straight, repeatable holes A reduced overall length and a shorter flute length increase stiffness and lower the tendency to bend under load. The combination of a short execution and a fully ground shank yields higher concentricity and better runout characteristics, which translates into more accurate bores and longer tool life in many workshop situations. Compliance with DIN 338 ensures this short twist drill meets recognised dimensional and manufacturing standards for cylindrical shank HSS drills. Made for metalworking: recommended materials and use cases This Twist Drill by MetavCUT is optimised for drilling in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast Iron, non‑ferrous metals and hard plastics. Use of a Type N spiral geometry supports cutting performance in these materials and is particularly suitable for stationary or machine‑driven operations where precision and repeatability matter most. The tool is intended for professional metalworking tasks on Drilling Machines rather than for general woodworking. Handling advice to maximise tool life and performance Ground drills can be very sharp but also somewhat more brittle than rolled types; therefore use steady, machine‑controlled feeds and adequate coolant when machining tougher alloys. Correct clamping in a clean chuck and moderate cutting speeds for the material will avoid premature wear or breakage. The short design reduces vibration and improves hole quality, but for deep or unstable setups consider additional support or a pilot drilling step to ensure concentric entry. Strong recommendation: Choose the MetavCUT short HSS‑G Twist Drill for precise metal drilling and contact METAV Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Information Twist Drill Brand: MetavCUT SKU: 450525-FDA Diameter: 5.25 mm Tip Angle: 135° Type: Type N Colour: Bright finished Execution: Short Material: HSS-G Norm: DIN 338 For Drilling Machine: Drilling Machine Spiral Length: 52 mm Overall Length: 86 mm Shank Execution: Fully ground Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its short, ground form is easier to grind and withstands greater loads, making it suitable for precise metalworking tasks where durability under stress is required. Which 3 drill types are there? In practice the main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for use in metals and hard plastics.

Twist Drill Type N — 5.2 mm, 118° tip, short HSS, DIN 338, black (MetavCUT) The Twist Drill Type N (short) is a compact HSS drill designed for precise metal drilling in Drilling Machines and Hand Drills. Short HSS design for high stability Conforms to DIN 338 for short twist drills 118° tip for reliable centring on metals 5.2 mm diameter for standard metalwork Black finish for clear visual contrast in use Durable HSS Construction for Reliable Metalworking The short HSS construction delivers a balance of elasticity and wear resistance ideal for routine metal drilling. Manufactured in accordance with DIN 338, this short twist drill offers a reduced overhang that increases rigidity and minimises bending under load. The result is consistent hole quality and longer tool life when drilling alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics. Users benefit from fewer rejects and less tool breakage during standard operations. Precision Tip Geometry That Improves Start and Centring A 118° tip angle provides better initial penetration and easier centring on slightly curved or uneven surfaces, which is especially useful for softer metals and general workshop tasks. The Type N “normal spiral” geometry is the classical choice for metal drilling, offering predictable chip removal and straightforward resharpening. This tip geometry reduces walking at the drill entry and supports cleaner, more accurate holes with minimal rework required. Compact Short Design for Stability and Accuracy With a reduced overall length and a spiral length optimised for stability, this short Twist Drill minimises deflection during use and is therefore suited to jobs requiring precision. The shorter configuration makes it particularly appropriate for bench work and applications where the drill protrudes only slightly from the chuck, improving concentricity and surface finish. Operators will notice steadier feeds and a lower risk of drill bending when working with diameters in the mid range. Practical Usage and Target Applications Designed primarily as a Drill for Metal, the Twist Drill Type N from MetavCUT is aimed at tradespeople, machinists and workshops that perform general metal fabrication and repair. Its roll-formed HSS manufacturing makes it especially suitable for drilling holes under 6 mm in a variety of metallic materials, while still being serviceable on non-ferrous materials and plastics. The black finish provides a clear visual contrast for alignment and handling during repetitive tasks. Care, Sharpening and Compatibility Notes This short HSS Twist Drill is straightforward to resharpen and maintain; its geometry allows conventional grinding without complex special tooling. For optimal results, use appropriate cutting lubrication and moderate feed rates to reduce heat build-up. When precision is critical, a rigid chuck and minimal overhang are recommended to preserve concentricity and hole quality. For larger diameters or deeper holes, consider drills specifically sized for those tasks to avoid undue stress on the tool. Strongly recommended: Choose the MetavCUT short HSS Twist Drill Type N for dependable, precise metal drilling — METAV Werkzeuge offers expert technical advice and support via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 and WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 40052-FDA Diameter: 5.2 mm Tip Angle: 118° Type: Type N Execution: short Material: HSS Colour: black Spiral Length: 52 mm Overall Length: 86 mm Application: Drills for metal Standard: DIN 338 Suitable For: Drilling Machine / Hand Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N best used for? The MetavCUT Twist Drill Type N is primarily intended for metalworking applications; it is used for drilling alloyed and unalloyed steels, cast iron, non-ferrous metals and plastics, providing reliable performance in routine workshop tasks. Can the MetavCUT Twist Drill Type N be used in a hand drill? Yes, the MetavCUT Twist Drill Type N in its short execution is suitable for use in both Drilling Machines and Hand Drills, offering increased stability due to its reduced overhang. What are Twist Drills used for? Twist Drills are mainly applied when machining high-strength materials and for larger hole diameters; their form is easily ground and they withstand higher loads. Which three drill types exist? There are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross cutting edge at the point of the twist drill, which significantly lowers friction forces and therefore reduces feed forces while improving centring in the workpiece. Can a Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can also be used in wood, but it offers less precise guidance and a less clean finish; it is easier to resharpen and shows less self-feeding action. For which drilling depths is the Twist Drill most commonly used? A through-hole is often executed with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general assumption that HSSE steels are always superior to standard HSS steels is incorrect; evaluate whether the specific working conditions justify the higher initial cost of HSSE before deciding.

Twist Drill by MetavCUT — 5.2 mm, 135° Point Angle, Type N, 5% Cobalt-Alloyed, Short, DIN 338, HSS‑E The Twist Drill is a short Type N metal drill optimised for precise drilling in hard materials with Drilling Machine use. Short design for higher stability and precision 5% Cobalt-alloyed HSS‑E for increased heat resistance 135° Point Angle for cleaner entry in hard steels Fully ground shank for excellent concentricity Conforms to DIN 338 for short spiral drills Precision and stability for demanding metalwork Designed as a short Twist Drill, this tool reduces the exposed length beyond the chuck, which directly improves stability and minimises bending under load. For tasks that require exact hole placement and minimal run-out, the reduced overhang is decisive. The 5.2 mm diameter in combination with the short overall length yields consistently round holes, making the drill particularly suitable for precision operations in workshops and production environments. Material composition that endures heat and wear The Twist Drill is manufactured from HSS‑E (high-speed steel with 5% Cobalt), which enhances red hardness and wear resistance compared with standard HSS. This composition helps maintain cutting edge integrity at higher cutting temperatures and under intermittent heavy loads. The result is longer tool life when drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, while still allowing economical resharpening when required. Geometry engineered for hard materials and quick engagement With a 135° Point Angle, the cutter tip penetrates harder workpieces more smoothly and reduces the tendency to grab or chatter on initial contact. The drill’s Type N normal spiral geometry balances chip evacuation and cutting action for metalworking applications. Users benefit from a faster approach to the correct feed and from cleaner hole entry in tougher materials, which reduces the need for secondary deburring. Fully ground flutes for accuracy in industrial settings This Twist Drill features a fully ground design, where the flute geometry is produced by CNC grinding rather than roll-forming. Grinding delivers sharp cutting edges and high concentricity, producing precise holes with excellent surface finish. While ground drills can be slightly more brittle than roll-formed variants, their superior accuracy makes them the preferred choice for stationary drilling machines and demanding production processes. Suitable applications and recommended users Intended primarily as a metalworking tool, the Twist Drill is ideal for professional workshops, toolrooms and maintenance departments that operate Drilling Machines. It is particularly recommended where small-diameter precision holes are required in tougher steels and alloys. For users uncertain about fitment or machine compatibility, METAV Werkzeuge provides expert consultation to match tool, machine and process parameters. We strongly recommend the MetavCUT Twist Drill for precision metal drilling — for technical advice, machine compatibility checks or complementary data please contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 47052-FDA Diameter: 5.2 mm Point Angle: 135° Type: Type N Execution: Short Colour / Alloy: 5% Cobalt-alloyed Material: HSS‑E Shaft Execution: Fully ground Spiral Length: 52 mm Overall Length: 86 mm For Drilling Machine: Drilling Machine Application: Drills for metal Norm: DIN 338 Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and where does it perform best? The MetavCUT Twist Drill (Type N short) is used chiefly for machining high-strength materials and larger drill diameters; its short design makes it especially suitable for precise metal drilling where low deflection and high stability are required. Which three drill types are common in metalworking? Typical categories are metal drill, wood drill and stone/concrete drill, with the MetavCUT Twist Drill belonging to the metal drill family for drilling in metals. Why are Twist Drills sharpened at the tip? The sharpening reduces the web thickness at the tip of the Twist Drill, significantly lowering friction and thus required feed forces; this also improves self-centring and reduces the risk of wandering at the start of the hole. Can you use a Twist Drill for wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance is reduced and hole quality is often inferior compared with dedicated wood drills; however, metal drills are easier to resharpen and exhibit lower tendency to pull into the workpiece. For which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is commonly executed with a Twist Drill; for diameters up to about 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE steels are categorically superior to HSS is not universally correct; decide based on specific working conditions whether the additional cost of HSSE is justified, considering factors such as cutting speed, material and required tool life.

Karosseriebohrer HSS‑G (Durchmesser 5,2 mm, Spitzenwinkel 135°, doppelseitig, blank, geschliffen) Der Karosseriebohrer ist ein kurzbauender, doppelseitiger HSS‑G Bohrer für präzise Bohrungen in Stahl, Gusseisen und Nichteisenmetallen mit Handbohrmaschine. HSS-G geschliffen für hohe Schnittkraft Doppelendbohrer: beidseitig einsetzbar 135° Spitzenwinkel für harte Werkstoffe Geschliffener Schaft für präzisen Rundlauf Kompaktbauform ideal für Karosserie und Blech Schnellere Arbeitszyklen durch geschliffene HSS‑Geometrie und geringere Anpresskraft Der Karosseriebohrer der MetavCUT Standard Line kombiniert HSS‑G-Material mit CNC‑geschliffener Geometrie, was eine sehr scharfe Schneide und hohe Rundlaufgenauigkeit ermöglicht. Das Ergebnis ist ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern. Diese Eigenschaft reduziert Ermüdung bei längerem Einsatz und erhöht die Effizienz bei Serien‑ und Reparaturarbeiten in der Karosserie‑Werkstatt. Präzision in dünnen Blechen und hartem Material dank 135° Spitzenwinkel Der 135° Spitzenwinkel wurde gewählt, um das Eintauchen in harte Werkstoffe wie legierten Stahl oder Temperguss zu erleichtern und das Anbohren zu verkürzen. Die kurzbauende Form und die doppelseitige Ausführung erlauben schnelles Weiterarbeiten: Bei stumpfer Spitze einfach umdrehen und weiterbohren. Für Anwender bedeutet das weniger Rüstzeit und konstante Bohrbildqualität bei Niet‑ und Blechverbindungen. Anwendungsempfehlungen für Handbohrmaschinen und Materialwahl Mit einem Durchmesser von 5,2 mm liegt der Bohrer im Standard‑Bereich für Handwerk und Montage, geeignet für dünne bis mittlere Bleche, Profile und Flachstahl. Für beste Ergebnisse empfiehlt sich ein leichtes Kühlmittel bei Stahl und eine kontrollierte Drehzahl mit stabiler Auflage. Bei stärkeren oder sehr zähen Materialien sollte vorgebohrt oder eine stationäre Maschine mit Kühlung genutzt werden, um Bruch durch Biegebeanspruchung zu vermeiden. Robuste Verarbeitung, sichere Handhabung und Hinweise zur Pflege Der komplett geschliffene Schaft sorgt für sicheren Rundlauf in Spannzangen und reduziert Vibrationen, was die Standzeit erhöht. Reinigung der Spannuten und regelmäßige Kontrolle auf Gratbildung verlängern die Lebensdauer. Wegen der spröderen Natur geschliffener HSS‑G Werkzeuge empfiehlt sich schonende Handhabung und, bei längeren Einsätzen, der Gebrauch einer stationären Maschine oder externer Kühlung. MetavCUT empfiehlt den Einsatz dieses Karosseriebohrers für präzise Blech‑ und Karosseriearbeiten; bei Fragen zur Anwendung oder für technische Beratung erreichen Sie unseren Kundenservice per eMail unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 — unsere Beratung hilft bei der Auswahl des richtigen Werkzeugs. Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58052-FDA Durchmesser: 5,2 mm Gesamtlänge: 62 mm Spirallänge: 16 mm Spitzenwinkel: 135° Ausführung: doppelseitig (Doppelendbohrer) Material: HSS-G Schaft Ausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Kann der Karosseriebohrer von MetavCUT in Edelstahl eingesetzt werden? Der Karosseriebohrer von MetavCUT (HSS‑G) ist für legierte und unlegierte Stähle sowie für Gusseisen und Nichteisenmetalle optimiert; bei rostfreien Edelstählen ist erhöhte Kühlung und reduzierte Drehzahl empfehlenswert, um Überhitzung und Verschleiß zu verringern. Wie nutze ich die doppelseitige Ausführung optimal bei der MetavCUT Karosseriebohrer‑Ausführung? Die doppelseitige Ausführung des MetavCUT Karosseriebohrers erlaubt das sofortige Umdrehen bei stumpfer Spitze; so steht praktisch eine zweite Schneide zur Verfügung, was Rüstzeiten reduziert und die Wirtschaftlichkeit im Werkstattalltag erhöht. Ist der geschliffene Schaft des MetavCUT Karosseriebohrers für Spannzangen geeignet? Ja, der geschliffene Schaft des MetavCUT Karosseriebohrers sorgt für besseren Rundlauf in Spannzangen und erhöht die Standzeit, weshalb diese Ausführung für stationäre und handgeführte Anwendungen mit stabiler Auflage empfohlen wird. Welche Drehzahl und Kühllösung empfiehlt MetavCUT für den Karosseriebohrer bei Stahl? MetavCUT empfiehlt für den Karosseriebohrer moderate Drehzahlen und den Einsatz von Schneidöl oder Kühlschmierstoff bei Stahl, um die Wärmeentwicklung zu reduzieren und die Standzeit der geschliffenen Schneide zu verlängern. Bei Unsicherheit berät unser Kundenservice gern telefonisch oder per eMail. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58052-FDA","sku":"58052-FDA","mpn":"58052-FDA","name":"Karosseriebohrer 58052-FDA","description":"Kurzbauender, doppelseitiger HSS-G Karosseriebohrer mit 5,2 mm Durchmesser, 135° Spitzenwinkel, geschliffenem Schaft und blanker Oberfläche; geeignet für präzise Bohrungen in legierten und unlegierten Stählen, Gusseisen und Nichteisenmetallen mit Handbohrmaschine; kompakte Bauform für Karosserie- und Blecharbeiten.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,2 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"62 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"16 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Preis Netto","value":"1.44"},{"@type":"PropertyValue","name":"Spiralänge","value":"16"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Kann der Karosseriebohrer von MetavCUT in Edelstahl eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT (HSS-G) eignet sich für legierte und unlegierte Stähle sowie für Gusseisen und Nichteisenmetalle; bei rostfreien Edelstählen wird erhöhte Kühlung und reduzierte Drehzahl empfohlen, um Überhitzung und vorzeitigen Verschleiß zu vermeiden."}},{"@type":"Question","name":"Wie nutze ich die doppelseitige Ausführung optimal bei dem Karosseriebohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die doppelseitige Ausführung des MetavCUT Karosseriebohrers erlaubt das Umdrehen bei stumpfer Spitze, so steht praktisch eine zweite Schneide zur Verfügung und Rüstzeiten werden reduziert."}},{"@type":"Question","name":"Ist der geschliffene Schaft des MetavCUT Karosseriebohrers für Spannzangen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der geschliffene Schaft des MetavCUT Karosseriebohrers sorgt für verbesserten Rundlauf in Spannzangen und reduziert Vibrationen, wodurch die Standzeit erhöht wird; empfohlen bei stationärer oder stabil aufliegender Handführung."}},{"@type":"Question","name":"Welche Drehzahl und Kühllösung empfiehlt MetavCUT für den Karosseriebohrer bei Stahl?","acceptedAnswer":{"@type":"Answer","text":"MetavCUT empfiehlt moderate Drehzahlen und den Einsatz von Schneidöl oder Kühlschmierstoff bei Stahl, um Wärmeentwicklung zu reduzieren und die Standzeit der geschliffenen Schneide zu verlängern."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/58052-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"Doppelendbohrer"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Kühlmittel empfohlen"},{"@type":"Thing","name":"Spannzangen geeignet"}]}]}

Twist Drill — 5.2 mm, 135°, Extra Long, HSS-G, DIN 1869, Bright Finished, Fully Ground The Twist Drill is an extra-long metal drill bit designed for deep, precise holes in high-strength materials, suitable for use with a Drilling Machine. Extra long design for deep drilling HSS‑G material for metal applications 135° tip for hard materials Fully ground shank for high precision DIN 1869 spiral for deep-hole performance Exceptional performance for deep metal drilling The HSS‑G construction combines high-speed steel toughness with a ground flute geometry that delivers clean, precise holes in demanding materials. Because the flutes are CNC‑ground rather than rolled, the bit offers high concentricity and sharp cutting edges, which results in reduced vibration and better hole quality. This makes the tool particularly effective when working with alloyed and unalloyed steel, cast iron and other hard metals where accuracy matters. Built for hard materials and challenging access With its 135° tip angle, the bit is optimised to penetrate tougher workpieces while reducing the tendency to wander at the start of a hole. The extra long overall length and extended spiral length enable drilling into deep or hard-to-reach positions without the need for extensions. Users performing through and blind holes in workshops or on production machines will benefit from a tool that maintains stability under load and supports deeper, consistent bore depths. Precision shank and usage recommendations The fully ground shank ensures superior run‑out characteristics when clamped in chucks or holders, providing repeatable accuracy for serial work. For best results, use the bit in a Drilling Machine with appropriate cutting fluid and moderate feed to avoid excessive stress; ground bits can be more brittle than rolled types and perform best with controlled cooling. The DIN 1869 spiral geometry promotes efficient chip evacuation during deep-hole drilling, reducing heat buildup and improving tool life. We recommend the MetavCUT Twist Drill for professionals who require deep, high‑quality metal bores — for personalised advice or technical support contact METAV Werkzeuge: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 32052-FDA Diameter: 5.2 mm Overall length: 195 mm Spiral length: 135 mm Tip angle: 135° Version: Extra long Shank finish: Fully ground Surface finish: Bright finished Material: HSS-G Standard: DIN 1869 Application: Drills for metal Packaging unit: 10 For use with: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill mainly used for? The MetavCUT Twist Drill (Twist Drill) is primarily used for machining high‑strength materials and larger drill diameters; its extra‑long design and HSS‑G composition make it suitable for deep drilling in alloyed and unalloyed steel, cast iron and hard plastics, delivering precise bores under demanding conditions. Which three drill types are most common? Common categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drills group and is designed specifically to meet those material demands.

Spiralbohrer HSS-G extra lang, Ø 5,2 mm, Spitzenwinkel 135°, blank, Ausführung extra lang, Norm DIN 1869, Material HSS-G Der Spiralbohrer HSS-G extra lang ist ein Spiralbohrer für Metall und wurde für tiefe Bohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen entwickelt. Extra Lange Bauform für Tiefe Bohrungen Geschliffene HSS-G Qualität für präzise Löcher 135° Spitzenwinkel für härtere Werkstoffe 245 mm Gesamtlänge mit 170 mm Spirallänge Tiefe Metallbohrungen mit hoher Effizienz und weniger Kraftaufwand Der HSS-G Spiralbohrer ermöglicht ein deutlich effizienteres Arbeiten: Durch die geschliffene Geometrie lässt sich in vielen Metallen bis zu 40 % schneller bohren bei gleichzeitig 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen Ausführungen. Dieser Vorteil reduziert die Belastung von Handbohrmaschine und Anwender und sorgt für konstante Bohrfortschritte bei langen Bohrungen. Der Einsatz in legierten und unlegierten Stählen sowie Gusswerkstoffen wird durch die robuste Spiralform und die längere Arbeitslänge unterstützt, sodass Wellen, Durchgangs- und Sacklochbohrungen in tieferen Bauteilen zuverlässig ausgeführt werden können. Geschliffen nach DIN 1869: Präzision, Schnittbild und Materialverständnis Als HSS-G geschliffen zeichnet sich dieser Spiralbohrer durch scharfe Schneiden und hohe Rundlaufgenauigkeit aus. Geschliffene Spannuten werden mittels CNC bearbeitet und ergeben saubere Spanabfuhr sowie präzise Bohrlochkanten. Der 135° Spitzenwinkel reduziert das Wandern beim Anbohren und ist besonders vorteilhaft in härteren Werkstoffen wie Edel- und Baustahl. Zur Erklärung: Ein größerer Spitzenwinkel verkürzt die Anbohrzeit und verteilt die Schnittkräfte, was bei harten Materialien bessere Ergebnisse liefert und eine höhere Oberflächenqualität des Lochs erzeugt. Praktische Einsatzgebiete und empfohlene Anwender Mit einem Durchmesser von 5,2 mm fällt der Bohrer in den Standard-Bereich und eignet sich daher für Werkstätten, Montage und anspruchsvolle Hobbyanwendungen. Die extra lange Ausführung erlaubt Arbeiten an schwer zugänglichen Stellen und bei tiefen Bauteilen, die sonst mehrstufiges Aufbohren erfordern würden. Anwender aus Maschinenbau, Metallbau und Instandsetzung profitieren von der Kombination aus Länge und geschliffener Ausführung, sollten jedoch beim mobilen Einsatz die erhöhte Bruchgefahr beachten und bei Bedarf stationäre Maschinen oder reduzierten Vorschub verwenden. Anwendungshinweise, Kühlung und Sicherheit für langlebige Ergebnisse Für lange Bohrungen empfiehlt sich konstante Kühlung und moderater Vorschub, um Überhitzung und vorzeitigen Verschleiß zu vermeiden. Geschliffene HSS-G Bohrer sind zwar schärfer und präziser, können aber spröder sein; daher ist eine sachgerechte Spannmittelwahl, ruhige Führung und gegebenenfalls Vorbohren zur Entlastung der Querschneide ratsam. Bei Handbohrmaschinen empfiehlt sich eine stabile Führung und gegebenenfalls ein Zentrierpunkt, um das Wandern der Spitze zu minimieren. Regelmäßige Kontrolle der Schneidkante und Reinigung der Spannuten verlängern die Lebensdauer und sichern die Wiederholgenauigkeit. Empfehlung: MetavCUT HSS-G Spiralbohrer extra lang für präzise, tiefe Metallbohrungen einsetzen und bei Fragen die kompetente Beratung von METAV Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 33052-FDA Durchmesser: 5,2 mm Material: HSS-G (geschliffen) Spitzenwinkel: 135° Ausführung: extra lang Farbe: blank Norm: DIN 1869 Gesamtlänge: 245 mm Spirallänge: 170 mm Schaft Ausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall, geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer MetavCUT HSS-G extra lang für Handbohrmaschinen geeignet? Der MetavCUT HSS-G Spiralbohrer in extra langer Ausführung kann mit Handbohrmaschinen eingesetzt werden, jedoch ist bei langen Bohrungen auf eine stabile Führung, moderaten Vorschub und Kühlung zu achten, da geschliffene Ausführungen empfindlicher gegen seitliche Belastung sind. Welche Werkstoffe kann der Spiralbohrer MetavCUT HSS-G bearbeiten? Mit dem MetavCUT HSS-G Spiralbohrer lassen sich legierter und unlegierter Stahl, Gusswerkstoffe, Nichteisenmetalle und Hartkunststoffe bohren; der 135° Spitzenwinkel ist speziell für härtere Werkstoffe vorteilhaft. Wie verlängere ich die Standzeit des MetavCUT Spiralbohrers HSS-G? Die Standzeit des MetavCUT Spiralbohrers HSS-G wird durch konstante Kühlung, moderate Vorschubwerte, gelegentliches Nachschärfen und regelmäßige Reinigung der Spannuten deutlich erhöht. Worin unterscheidet sich der geschliffene MetavCUT Spiralbohrer von gewalzten Bohrern? Der geschliffene MetavCUT Spiralbohrer bietet schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; im Gegenzug sind geschliffene Bohrer tendenziell spröder und erfordern behutsameren Einsatz, besonders bei mobilen Anwendungen. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#33052-FDA","sku":"33052-FDA","mpn":"33052-FDA","name":"Spiralbohrer 33052-FDA","description":"Spiralbohrer HSS-G extra lang Ø 5,2 mm, Spitzenwinkel 135°, blank, Ausführung extra lang, Norm DIN 1869; Geschliffene HSS-G Qualität für tiefe Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen; 245 mm Gesamtlänge, 170 mm Spirallänge; besonders geeignet für Werkstatt, Montage und anspruchsvolle Anwendungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,2 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G (geschliffen)"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"245 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"170 mm"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall, geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer MetavCUT HSS-G extra lang für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer HSS-G extra lang kann mit Handbohrmaschinen eingesetzt werden; bei langen Bohrungen sind stabile Führung, moderater Vorschub und konstante Kühlung zu beachten, da geschliffene Ausführungen empfindlicher gegenüber seitlicher Belastung sind."}},{"@type":"Question","name":"Welche Werkstoffe kann der Spiralbohrer MetavCUT HSS-G bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer HSS-G bohrt legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle und Hartkunststoffe; der 135° Spitzenwinkel ist speziell vorteilhaft für härtere Werkstoffe."}},{"@type":"Question","name":"Wie verlängere ich die Standzeit des MetavCUT Spiralbohrers HSS-G?","acceptedAnswer":{"@type":"Answer","text":"Standzeitverlängerung gelingt durch konstante Kühlung, moderate Vorschubwerte, gelegentliches Nachschärfen und regelmäßige Reinigung der Spannuten; sachgerechte Spannmittelwahl und ruhige Führung reduzieren Bruchrisiken."}},{"@type":"Question","name":"Worin unterscheidet sich der geschliffene MetavCUT Spiralbohrer von gewalzten Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene MetavCUT Spiralbohrer bietet schärfere Schneiden und höhere Rundlaufgenauigkeit für sauberere Bohrlöcher; im Gegenzug sind geschliffene Bohrer tendenziell spröder und erfordern behutsameren Einsatz, besonders bei mobilen Anwendungen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-33052-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"HSS-G geschliffener Spiralbohrer"},{"@type":"Thing","name":"Tiefe Metallbohrungen"},{"@type":"Thing","name":"Norm DIN 1869"},{"@type":"Thing","name":"Extra lange Ausführung"}],"mentions":[{"@type":"Thing","name":"Einsatz in Werkstatt und Montage"},{"@type":"Thing","name":"Stabile Führung und Kühlung empfohlen"},{"@type":"Thing","name":"Vorteile: schnelleres Bohren und geringere Anpresskraft"}]}]}

Spiralbohrer von MetavCUT — HSS‑G, 5,2 mm, 135°, extra lang, blank, DIN 1869 Der Spiralbohrer von MetavCUT ist ein extra langer HSS‑G Bohrer für tiefe Metallbohrungen und eignet sich sowohl für Handbohrmaschine als auch für stationäre Anwendungen. Extra lange Bauform für tiefe Bohrungen Spirallänge 210 mm für effektive Spanabfuhr HSS‑G geschliffen für hohe Schnittgeschwindigkeit 135° Spitzenwinkel reduziert Anbohrverzug in harten Werkstoffen DIN 1869 Tieflochspirale für anspruchsvolle Metallarbeiten Schnelle und kraftsparende Bohrungen in Stahl und Guss Dank der HSS‑G Legierung und der geschliffenen Geometrie ermöglicht dieser Bohrer ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS‑Bohrern. Für Anwender bedeutet das weniger Ermüdung und steigende Produktivität bei Bohrungen in legiertem und unlegiertem Stahl, Gussstahl sowie Nichteisenmetallen. Der 135° Spitzenwinkel sorgt darüber hinaus für ein kontrolliertes Eindringen in härtere Werkstoffe und reduziert das Wanderverhalten beim Anbohren. Extra lange Ausführung für tiefe und schwer erreichbare Löcher Die Bauform mit Gesamtlänge 315 mm und Spirallänge 210 mm ist speziell für tiefe Bohrungen konzipiert. Die Tieflochspirale nach DIN 1869 unterstützt die Spanabfuhr auch unter erschwerten Bedingungen, sodass längere Arbeitswege möglich sind, ohne sofortige Verstopfung. Bei längeren Durchgangsbohrungen empfiehlt sich die Nutzung von Kühlung und eine stationäre Aufnahme, um Auslenkungen zu minimieren und die Standzeit zu erhöhen. Geschliffener Schaft und Geometrie: Präzision mit Anwendungshinweis Die geschliffene Schaft‑ und Spiralform sorgt für sehr scharfe Schneiden, hohe Rundlaufgenauigkeit und saubere Bohrbilder, was besonders bei präzisen Metallbearbeitungen von Vorteil ist. Gleichzeitig ist ein geschliffener HSS‑G Bohrer empfindlicher gegenüber Biegebeanspruchung; deshalb ist die Verwendung in stationären Maschinen oder mit stabiler Bohraufnahme zu bevorzugen. Für beste Ergebnisse Kühlung einsetzen und Vorschub kontrolliert wählen. Entwickelt für Profis in Werkstatt und Industrie Dieses Werkzeug richtet sich an Handwerker, Instandhalter und Fertigungsbetriebe, die tiefe Metallbohrungen mit hoher Präzision benötigen. Im Standard‑Bereich (Durchmesser 2,0 mm bis 13,0 mm) bietet der Bohrer eine ausgewogene Kombination aus Standzeit und Schnittleistung, ideal für Blech, Profile, Baustahl und Hartkunststoff. Die extra lange Ausführung stellt sicher, dass auch schwer zugängliche Bohrstellen erreicht werden können. Empfehlung: Den extra langen MetavCUT HSS‑G Spiralbohrer für tiefe Metallbohrungen wählen — bei Fragen steht METAV Werkzeuge mit technischer Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gern zur Verfügung. Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 34052-FDA Durchmesser: 5,2 mm Spitzenwinkel: 135° Material: HSS‑G Ausführung: extra lang Schaft Ausführung: geschliffen Spirallänge: 210 mm Gesamtlänge: 315 mm Farbe: blank Norm: DIN 1869 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was macht den MetavCUT Spiralbohrer mit 5,2 mm besonders geeignet für Metall? Der MetavCUT Spiralbohrer in 5,2 mm verfügt über eine HSS‑G Legierung und einen 135° Spitzenwinkel, wodurch sich das Eindringen in legierte und unlegierte Stähle vereinfacht und saubere Bohrbilder erzielt werden. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der MetavCUT Spiralbohrer ist für Handbohrmaschine geeignet, empfiehlt sich aber aufgrund der extra langen Bauform und der geschliffenen Geometrie besonders für den Einsatz in stationären oder stabil eingespannten Anwendungen. Wie sollte die Spanabfuhr beim extra langen Spiralbohrer erfolgen? Bei dem MetavCUT Spiralbohrer sorgt die Spirallänge 210 mm für verbesserte Spanabfuhr; zusätzlich wird der Einsatz von Kühlmittel und moderatem Vorschub empfohlen, um Standzeit und Bohrbild zu optimieren. Wer hilft bei technischen Fragen zum Spiralbohrer von MetavCUT? Bei Unklarheiten oder Bedarf an ergänzenden technischen Daten berät METAV Werkzeuge kompetent per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#34052-FDA","sku":"34052-FDA","mpn":"34052-FDA","gtin13":"","name":"Spiralbohrer 34052-FDA","description":"Spiralbohrer HSS-G, 5,2 mm, 135°, extra lang, blank, DIN 1869. Extra lange Bauform mit Spirallänge 210 mm und Gesamtlänge 315 mm für tiefe Metallbohrungen; geschliffener Schaft und Geometrie für hohe Rundlaufgenauigkeit; geeignet für Handbohrmaschine und stationäre Anwendungen; ideal für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,2 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"210 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"315 mm"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Eignung","value":"Legierter und unlegierter Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle, Hartkunststoff"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Was macht den MetavCUT Spiralbohrer 5,2 mm besonders geeignet für Metall?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 5,2 mm verfügt über eine HSS-G Legierung und einen 135° Spitzenwinkel; die geschliffene Geometrie erzeugt scharfe Schneiden und saubere Bohrbilder, sodass das Bohren in legierten und unlegierten Stählen sowie Gusswerkstoffen erleichtert wird."}},{"@type":"Question","name":"Kann der MetavCUT Spiralbohrer 5,2 mm in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer 5,2 mm ist für Handbohrmaschine geeignet; aufgrund der extra langen Ausführung und der geschliffenen Schaftform empfiehlt sich jedoch bei tiefen Bohrungen eine stationäre Aufnahme zur Minimierung von Auslenkungen."}},{"@type":"Question","name":"Wie sollte die Spanabfuhr beim extra langen MetavCUT Spiralbohrer 5,2 mm erfolgen?","acceptedAnswer":{"@type":"Answer","text":"Die Spirallänge von 210 mm unterstützt die Spanabfuhr; zusätzlich werden Kühlmittel und moderater Vorschub empfohlen, um Standzeit und Bohrbild zu optimieren."}},{"@type":"Question","name":"Für welche Materialien eignet sich der MetavCUT Spiralbohrer 5,2 mm?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 5,2 mm eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff und kann bei Werkstoffen bis ca. 1000 N/mm² eingesetzt werden."},{"@type":"Answer","text":"Bei Bedarf an ergänzenden technischen Daten berät METAV Werkzeuge gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS-G"},{"@type":"Thing","name":"Tieflochspirale DIN 1869"},{"@type":"Thing","name":"Extra lange Ausführung für tiefe Bohrungen"}],"mentions":[{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"Spirallänge 210 mm"},{"@type":"Thing","name":"Gesamtlänge 315 mm"},{"@type":"Thing","name":"135° Spitzenwinkel"}]}]}

Spiralbohrer (5,2 mm, 135°, Typ N, blank, extra kurz, DIN 1897, HSS-G) von MetavCUT Der Spiralbohrer ist ein extra kurzer HSS-G Bohrer nach DIN 1897 für Metallbohrungen mit Zylinderschaft und wurde für den Einsatz in Handbohrmaschine konzipiert. Extra kurze Bauform für höhere Stabilität HSS-G-Material für erhöhte Standzeit Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft passt in Standard-Bohrfutter Spiralänge 26 mm bei Gesamtlänge 62 mm Mehr Stabilität bei beengten Arbeitsverhältnissen Der Spiralbohrer im extra kurzen Format bietet deutlich mehr Stabilität als lange Ausführungen und reduziert so das Risiko von Bruch und Auslenkung. Durch die verkürzte Gesamt- und Arbeitslänge wird die Verdrehungsfestigkeit erhöht, was besonders beim Bohren in dünnwandigen Blechen und Profilen von Vorteil ist. Anwender profitieren von sicherer Führung und präziseren Bohrungen auch in schwer zugänglichen Bereichen. Materialwahl und Leistungsgewinn für effizientes Arbeiten Der Einsatz des HSS-G Materials sorgt für gute Zähigkeit bei gleichzeitig hoher Schnittfestigkeit. Die geschliffene Ausführung ermöglicht ein bis zu 40 % schnelleres Bohren und erfordert dabei 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern, was die Arbeitsleistung steigert und Ermüdung verringert. Der Spitzenwinkel 135° unterstützt das sichere Anbohren in legierten Stählen und zähen Werkstoffen. Geeignete Anwendungen und Maschineneinsatz klar definiert Mit einem Durchmesser von 5,2 mm fällt dieser Bohrer in den Standard-Bereich für den Alltagsgebrauch und ist optimal für Handgeführte Akkubohrschrauber und stationäre Bohrmaschinen geeignet. Typische Werkstoffe sind Baustahl, Aluminium, Gusseisen, Nichteisenmetalle und Hartkunststoffe. Für höchste Präzision empfiehlt es sich, vor dem Bohren anzuzeichnen oder mit einem Zentrierbohrer anzupunken, um ein Wandern des Bohrers zu vermeiden. Für wen dieses Werkzeug entwickelt wurde und praktische Hinweise Der Bohrer richtet sich an Profi-Handwerker sowie anspruchsvolle Heimwerker, die präzise Metallbohrungen erwarten. Der Zylinderschaft passt universell in gängige Dreibackenfutter und vereinfacht den Werkzeugwechsel. Bei sehr hohem Drehmoment kann der Zylinderschaft jedoch zum Durchrutschen neigen; in solchen Fällen empfiehlt sich die Verwendung geeigneter Spannfutter oder alternativer Schaftformen. Für präzise Metallbohrungen empfiehlt MetavCUT den extra kurzen HSS-G Spiralbohrer mit 135° Spitzenwinkel – kontaktieren Sie METAV Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 für persönliche Beratung und Bestellhilfe. Bezeichnung: Spiralbohrer Marke/Hersteller: MetavCUT SKU: 56052-FDA Durchmesser: 5,2 mm Spitzenwinkel: 135° Typ: Typ N Ausführung: extra kurz Farbe: blank Material: HSS-G Norm: DIN 1897 Gesamtlänge: 62 mm Spiralänge: 26 mm Schaftausführung: Zylinder Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie gut eignet sich der Spiralbohrer von MetavCUT für Edelstahl? Der Spiralbohrer von MetavCUT (Typ N) mit 135° Spitzenwinkel ist speziell für härtere Werkstoffe konzipiert und ermöglicht saubere Anbohrungen in legierten Stählen; bei hochlegiertem Edelstahl sind angepasste Schnittparameter und Kühlung empfehlenswert. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz in Handbohrmaschine vorgesehen; der Zylinderschaft erlaubt das Einspannen in Standard-Dreibackenfutter, wobei auf ausreichende Spannkraft zu achten ist. Wie wirkt sich die extra kurze Ausführung auf die Standzeit aus? Die extra kurze Bauform des Spiralbohrers von MetavCUT erhöht die Stabilität während des Bohrens und reduziert Bruchrisiken, was zusammen mit dem HSS-G Material zu einer verbesserten Standzeit beiträgt. Warum wurde der Spitzenwinkel 135° gewählt? Der 135° Spitzenwinkel des Spiralbohrers von MetavCUT erleichtert das Anbohren in harten Werkstoffen und verringert das Auslaufen beim Einsetzen, wodurch das Werkstück sauberer und präziser bearbeitet werden kann. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#56052-FDA","sku":"56052-FDA","mpn":"56052-FDA","name":"Spiralbohrer 56052-FDA","description":"Extra kurzer HSS-G Spiralbohrer nach DIN 1897, Durchmesser 5,2 mm, Spitzenwinkel 135°, Typ N, Ausführung extra kurz, Farbe blank, Schaftausführung Zylinder, Gesamtlänge 62 mm, Spiralänge 26 mm; Konzipiert für Metallbohrungen mit Handbohrmaschine; hohe Stabilität und längere Standzeit durch geschliffene Ausführung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke/Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,2 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"extra kurz"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1897"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"62 mm"},{"@type":"PropertyValue","name":"Spiralänge","value":"26 mm"},{"@type":"PropertyValue","name":"Schaftausführung","value":"Zylinder"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie gut eignet sich der Spiralbohrer von MetavCUT für Edelstahl?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Typ N) mit 135° Spitzenwinkel ist für härtere Werkstoffe ausgelegt und ermöglicht saubere Anbohrungen in legierten Stählen; bei hochlegiertem Edelstahl sind angepasste Schnittparameter und Kühlung empfehlenswert."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT ist für den Einsatz in Handbohrmaschine vorgesehen; der Zylinderschaft erlaubt das Einspannen in Standard-Dreibackenfutter, wobei auf ausreichende Spannkraft zu achten ist."}},{"@type":"Question","name":"Wie wirkt sich die extra kurze Ausführung auf die Standzeit aus?","acceptedAnswer":{"@type":"Answer","text":"Die extra kurze Bauform des Spiralbohrers von MetavCUT erhöht die Stabilität während des Bohrens und reduziert Bruchrisiken, was zusammen mit dem HSS-G Material zu einer verbesserten Standzeit beiträgt."}},{"@type":"Question","name":"Warum wurde der Spitzenwinkel 135° gewählt?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel des Spiralbohrers von MetavCUT erleichtert das Anbohren in harten Werkstoffen und verringert das Auslaufen beim Einsetzen, wodurch das Werkstück sauberer und präziser bearbeitet werden kann."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer"},{"@type":"Thing","name":"HSS-G Bohrer"},{"@type":"Thing","name":"DIN 1897 Standard"}],"mentions":[{"@type":"Thing","name":"Zylinderschaft"},{"@type":"Thing","name":"Extra kurze Bauform"},{"@type":"Thing","name":"Spitzenwinkel 135°"}]}]}

Spiralbohrer 5,2 mm | 135° | Typ N | TIN-beschichtet | kurze Ausführung | DIN 338 | HSS-G von MetavCUT – Standard Line Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS-G-Bohrer für präzise Metallbearbeitung mit hoher Standzeit und verbesserter Stabilität. Kurze Ausführung für höhere Stabilität TIN-Beschichtung reduziert Reibung und Verschleiß Geschliffener HSS-G Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Längere Lebensdauer durch HSS-G und TIN-Beschichtung Die TIN-Beschichtung reduziert Reibung und erhöht die Verschleißfestigkeit beim Bohren in Metall deutlich. In Kombination mit dem HSS-G Werkstoff verbleibt die Schneide länger scharf, wodurch Standzeiten steigen und Werkstattunterbrechungen seltener werden. Bei Verwendung einer geeigneten Kühlung verringert sich zusätzlich die thermische Belastung, was die Lebensdauer des Bohrers weiter verlängert. Höhere Präzision dank kurzer Auskraglänge und geschliffenem Schaft Die kurze Ausführung und der geschliffene Schaft sorgen für eine deutlich geringere Auslenkung beim Bohren. Dies führt zu saubereren Bohrlöchern und einer besseren Rundlaufgenauigkeit, was insbesondere bei Passungen und Serienarbeiten Zeit spart. Der geschliffene Bohrer bietet scharfe Schneiden und ermöglicht bis zu 40 % schnelleres Bohren sowie ca. 50 % weniger Anpresskraft gegenüber klassischen HSS-Varianten. Angepasst an harte Werkstoffe und praxisgerechte Arbeitsweise Mit einem Spitzenwinkel von 135° ist der Bohrer speziell für harte Werkstoffe ausgelegt und dringt kontrolliert in Edelstahl, legierten Stahl und temperguss ein. Für maximale Prozesssicherheit empfiehlt sich bei hoher Präzision ein vorheriges Anpunkten oder Zentrieren, sowie der Einsatz von Kühlschmierstoffen bei stationären Einsätzen. So werden Spanabfuhr und Wärmeentwicklung optimiert. Vielseitigkeit für Werkstatt und Montage mit klarem Anwendungsvorteil Der Bohrer eignet sich für die Bearbeitung von legiertem und unlegiertem Stahl, Gusseisen, Kupfer, Bronze und Hartkunststoff und ist damit ein vielseitiges Werkzeug für Werkstatt, Montage und industrielle Anwendungen. Durch die Einordnung im Standard-Bereich (Durchmesser 2,0–13,0 mm) passt dieses Werkzeug gut zu handgeführten Akkubohrschraubern und stationären Bohrmaschinen, wo Stabilität und Effizienz gefragt sind. Setzen Sie auf den MetavCUT HSS-G Spiralbohrer mit TIN-Beschichtung für präzise, langlebige Bohrergebnisse und kontaktieren Sie Metav Werkzeuge bei Fragen oder zur technischen Beratung unter info@metav-werkzeuge.com oder +49 2822 7131930 – wir beraten Sie gerne und liefern kompetent aus. Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 46052-FDA Durchmesser: 5,2 mm Spitzenwinkel: 135° Typ: Typ N Farbe: TIN-beschichtet Ausführung: kurz Material: HSS-G Norm: DIN 338 Gesamtlänge: 86 mm Spirallänge: 52 mm Schaft Ausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Materialien lassen sich mit dem Spiralbohrer von MetavCUT bearbeiten? Der MetavCUT Spiralbohrer (HSS-G, TIN-beschichtet) eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss, Kupfer, Bronze sowie Hartkunststoff und deckt damit die gängigen Metallanwendungen in Werkstatt und Montage ab. Ist der Spiralbohrer von MetavCUT für den Einsatz in Akku- oder Handbohrmaschinen geeignet? Ja, der Spiralbohrer ist für die Nutzung in Handbohrmaschine und akkubetriebenen Geräten ausgelegt; bei längeren oder sehr präzisen Bohrungen empfiehlt sich jedoch die Verwendung einer stationären Maschine und ein Voranbohren bei engen Toleranzen. Wie sollte ich den MetavCUT HSS-G Spiralbohrer kühlen, um die Standzeit zu erhöhen? Für optimale Standzeiten empfiehlt sich ein kontinuierlicher Einsatz von Kühlschmierstoffen oder gelegentliche Kühlpausen bei stationärer Bearbeitung; die TIN-Beschichtung reduziert zwar Reibung, kann aber thermische Belastung durch Kühlung noch besser abmildern. Brauche ich ein Zentrierbohrer vor dem Bohren mit dem MetavCUT Spiralbohrer? Für hohe Präzision oder Bohrungen nahe Passungen ist ein Zentrierbohrer oder Anpunkt empfohlen, da dies den Rundlauf und die Maßhaltigkeit beim Einsatz des Spiralbohrers verbessert. Bei einfachen Standardanwendungen im Bereich 2–13 mm ist direktes Bohren möglich. Wen kann ich kontaktieren, wenn ich unsicher bin, ob der Spiralbohrer für meine Anwendung passt? Bei Fragen zur Eignung oder für weiterführende technische Daten steht Metav Werkzeuge kompetent zur Beratung zur Verfügung: info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#46052-FDA","sku":"46052-FDA","mpn":"46052-FDA","name":"Spiralbohrer 46052-FDA","description":"Kurzer geschliffener HSS-G Spiralbohrer, Durchmesser 5,2 mm, Spitzenwinkel 135°, Typ N, TIN-beschichtet, kurze Ausführung nach DIN 338; geeignet für Metallbearbeitung in Werkstatt und Montage, hohe Standzeit und verbesserte Stabilität.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,2 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"86 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"52 mm"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Preis Netto","value":"1.38 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Materialien lassen sich mit dem Spiralbohrer von MetavCUT bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer (HSS-G, TIN-beschichtet) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Kupfer, Bronze, Neusilber sowie Hartkunststoff und deckt damit die gängigen Metallanwendungen in Werkstatt und Montage ab."}},{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für den Einsatz in Akku- oder Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer ist für die Nutzung in Handbohrmaschine und akkubetriebenen Geräten ausgelegt; bei sehr präzisen oder langen Bohrungen empfiehlt sich eine stationäre Maschine und gegebenenfalls Vorbohren zur Maßhaltigkeit."}},{"@type":"Question","name":"Wie sollte der MetavCUT HSS-G Spiralbohrer gekühlt werden, um die Standzeit zu erhöhen?","acceptedAnswer":{"@type":"Answer","text":"Für optimale Standzeiten empfiehlt sich der Einsatz von Kühlschmierstoffen oder regelmäßige Kühlpausen bei stationärer Bearbeitung; die TIN‑Beschichtung reduziert Reibung, Kühlung vermindert zusätzlich thermische Belastung."}},{"@type":"Question","name":"Brauche ich einen Zentrierbohrer vor dem Bohren mit dem MetavCUT Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Bei hoher Präzision oder Bohrungen nahe Passungen wird ein Zentrierbohrer oder Anpunkt empfohlen, um Rundlauf und Maßhaltigkeit zu verbessern; im typischen Standardbereich (2,0–13,0 mm) ist direktes Bohren oft möglich."}},{"@type":"Question","name":"Wen kann ich kontaktieren, wenn ich unsicher bin, ob der Spiralbohrer für meine Anwendung passt?","acceptedAnswer":{"@type":"Answer","text":"Bei Fragen zur Eignung oder für weiterführende technische Daten steht Metav Werkzeuge kompetent zur Beratung zur Verfügung: info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/46052-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Kurzbohrer für Metallbearbeitung"},{"@type":"Thing","name":"DIN 338 Klassifizierung"}],"mentions":[{"@type":"Thing","name":"TIN-Beschichtung"},{"@type":"Thing","name":"HSS-G geschliffener Schaft"},{"@type":"Thing","name":"Spitzenwinkel 135°"}]}]}

Twist Drill — Long HSS‑G Twist Drill, 5.2 mm, 135°, Bright Finished, DIN 340 The Twist Drill is a long HSS‑G drill bit engineered for deep metal drilling applications in Drilling Machines. Long HSS‑G design for deep holes 5.2 mm diameter for precise metal drilling 135° tip angle for hard materials Fully ground shank for high runout accuracy DIN 340 compliant, bright finished surface Faster, more efficient drilling in demanding materials The long HSS‑G construction delivers measurable performance advantages: HSS‑G material and CNC grinding produce very sharp cutting edges that enable up to 40% faster drilling with reduced axial force compared to conventional HSS bits. The 135° tip angle is optimised for harder alloys and stainless steels, reducing walking on start and shortening dwell time during the initial contact. This results in cleaner holes and improved machining predictability. Reach deep or awkward bores with confidence When access is limited or bore depth exceeds standard lengths, the extended overall length (132 mm) and long spiral length (87 mm) permit drilling in deep pockets or recessed features without extensions. The bright finished flute and fully ground shank support consistent chip evacuation and accurate centring, which is particularly important for deep-hole quality and tool life in stationary and portable Drilling Machines. Reliable application range and handling advice Designed to DIN 340 standards, this tool is suitable for a wide range of metals including alloyed and unalloyed steel, cast steel, grey and spheroidal cast iron, sintered iron and non‑ferrous metals. For best results use appropriate coolant and moderate cutting speeds for hard materials; the ground geometry gives high precision but can be more brittle than rolled types, so avoid excessive side loads. This ensures both performance and safe operation in workshop environments. Who benefits most from this Twist Drill Metalworkers, toolroom technicians and maintenance professionals who require deep, accurate holes will value the combination of long design, HSS‑G sharpness and DIN conformity. The bit is a practical choice where hole quality and positional accuracy matter, for example in jigs, fixtures and component bores, and when easier regrinding is an operational advantage. Strong recommendation: Choose the MetavCUT long HSS‑G Twist Drill for demanding deep‑metal drilling tasks — for tailored advice and assistance METAV Werkzeuge offers expert consultation: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 53052-FDA Diameter: 5.2 mm Point angle: 135° Execution: long Overall length: 132 mm Spiral length: 87 mm Shank finish: fully ground Colour: bright finished Material: HSS‑G Norm: DIN 340 For Use In: Drilling Machine Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The Twist Drill from MetavCUT is primarily applied to machining high‑strength materials and larger drill diameters; its long execution is useful for deeper bores. The ground geometry makes the bit easier to sharpen while maintaining resistance to heavy loads, which is why it is favoured for demanding metalworking tasks. Which three drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Stone/Concrete Drill. The MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metalworking applications.

Spiralbohrer – HSS, 5,3 mm, 118°, Typ N, schwarz, kurz, DIN 338, MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338 für präzise Metallbohrungen mit Handbohrmaschine und stationären Geräten Kurzausführung nach DIN 338 für mehr Stabilität HSS-Material für legierten und unlegierten Stahl 5,3 mm Durchmesser, 118° Spitzenwinkel Typ N Normalspirale, optimal für Metallbohrungen Geeignet für Handbohrmaschine und stationär Hohe Belastbarkeit durch HSS und gezielte Fertigung Der HSS-Werkstoff sorgt für eine hohe Elastizität und reduziert das Bruchrisiko insbesondere bei kleinen Durchmessern unter 6 mm. Durch die rollgewalzte oder geschliffene Fertigung gemäß DIN 338 entsteht eine homogene Spanabnahme, die die Standzeit erhöht. Anwender profitieren von einer zuverlässigen Kombination aus Zähigkeit und Härte, wodurch der Kurzbohrer weniger zum Ausschwenken neigt und saubere Bohrbilder in legierten und unlegierten Stählen, Gusseisen sowie Nichteisenmetallen liefert. Kurze Ausführung für mehr Präzision und Stabilität Die kurze Bauform reduziert die Auskraglänge und minimiert Vibrationen, was die Präzision bei Ein- und Ausschlägen verbessert. Das führt zu genauer positionierten Bohrungen und geringerer Nacharbeit. Die Spiralgeometrie mit 52 mm Spirallänge unterstützt die effiziente Späneförderung bei flachen bis mitteltiefen Löchern, während die robuste Konstruktion einen sicheren Einsatz in Handbohrmaschinen sowie auf stationären Säulenbohrern ermöglicht. Spitzenwinkel 118°: Vielseitigkeit und Anbohrverhalten Der 118° Spitzenwinkel erleichtert das Zentrieren auf leicht gewölbten Oberflächen und ist besonders geeignet für weichere bis mittlere Metallarten wie Aluminium und Baustähle. Für besonders harte Werkstoffe kann ein größerer Winkel sinnvoll sein, doch für die meisten Montage- und Werkstattaufgaben bietet diese Spitze ein gutes Gleichgewicht zwischen Anbohrverhalten und Spanbildung. Anwender erhalten damit einen Allrounder für den täglichen Einsatz. Einsatzbereich und Anwendernutzen im Praxisalltag Mit einem Durchmesser von 5,3 mm fällt der Bohrer in den Standard-Bereich für vielseitige Anwendungen: Werkstätten, Montage, Reparatur und anspruchsvolle DIY-Projekte. Die Kombination aus Typ N Normalspirale und kurzer Ausführung macht ihn ideal für das Bohren in Blechen, Profilen und Flachstahl. Anwender sollten bei höheren Präzisionsanforderungen vorbohren und bei längeren Bohrungen stufenweise aufbohren, um die Querschneide zu entlasten und beste Ergebnisse zu erzielen. Mit dem MetavCUT Spiralbohrer HSS in kurzer Ausführung entscheiden Sie sich für belastbare Präzision und stabile Bohrungen – bei Fragen zu Einsatz oder Auswahl berät METAV Werkzeuge kompetent per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40053-FDA Durchmesser: 5,3 mm Spitzenwinkel: 118° Typ: Typ N Ausführung: kurz Farbe: schwarz Material: HSS Norm: DIN 338 Gesamtlänge: 86 mm Spirallänge: 52 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer von MetavCUT für rostfreien Stahl? Der Spiralbohrer von MetavCUT (Kurzbohrer, Typ N) ist für viele Stahlsorten geeignet; bei besonders harten oder hitzeempfindlichen Edelstählen empfiehlt sich jedoch ein angepasster Spitzenwinkel oder ein Hartmetall- oder beschichteter Bohrer. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für den Einsatz mit Handbohrmaschinen ausgelegt; die kurze Ausführung erhöht die Stabilität und verringert das Risiko des Auswanderns beim Führen. Welche Pflege verlängert die Lebensdauer des Spiralbohrers von MetavCUT? Die Lebensdauer des Spiralbohrers von MetavCUT lässt sich durch korrektes Kühlen mit Schneidöl, angemessene Schnittgeschwindigkeiten und das Vermeiden von zu hoher Vorschubkraft deutlich steigern. Ist der Spiralbohrer von MetavCUT für dünne Bleche geeignet? Der Spiralbohrer von MetavCUT eignet sich gut für dünne bis mittlere Bleche; bei sehr dünnen oder filigranen Teilen empfiehlt sich feines Anpunktieren oder eine Spannvorrichtung, um Ausrisse zu vermeiden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40053-FDA","sku":"40053-FDA","mpn":"40053-FDA","name":"Spiralbohrer 40053-FDA","description":"Kurzbohrer HSS, 5,3 mm, 118° Spitzenwinkel, Typ N Normalspirale, schwarz, kurze Ausführung nach DIN 338; geeignet für Metallbohrungen mit Handbohrmaschine und stationären Geräten; robuste Spiralgeometrie mit 52 mm Spirallänge für effiziente Späneförderung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,3 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"86 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"52 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Kurzbohrer, Typ N) eignet sich für viele Stahlsorten; bei besonders harten oder hitzeempfindlichen Edelstählen empfiehlt sich jedoch ein angepasster Spitzenwinkel oder ein Hartmetall‑ beziehungsweise beschichteter Bohrer."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT ist für den Einsatz mit Handbohrmaschinen ausgelegt; die kurze Ausführung erhöht die Stabilität und verringert das Risiko des Auswanderns beim Führen."}},{"@type":"Question","name":"Wie verlängert man die Lebensdauer des Spiralbohrers von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die Lebensdauer des Spiralbohrers von MetavCUT lässt sich durch korrektes Kühlen mit Schneidöl, angemessene Schnittgeschwindigkeiten und das Vermeiden von zu hoher Vorschubkraft deutlich steigern."}},{"@type":"Question","name":"Eignet sich der Spiralbohrer von MetavCUT für dünne Bleche?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT eignet sich gut für dünne bis mittlere Bleche; bei sehr dünnen oder filigranen Teilen empfiehlt sich feines Anpunktieren oder eine Spannvorrichtung, um Ausrisse zu vermeiden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzbohrer nach DIN 338"},{"@type":"Thing","name":"HSS Spiralbohrer für Metall"},{"@type":"Thing","name":"Typ N Normalspirale"}],"mentions":[{"@type":"Thing","name":"Kurzbohrer bietet höhere Stabilität"},{"@type":"Thing","name":"52 mm Spirallänge für effiziente Späneförderung"},{"@type":"Thing","name":"Geeignet für Handbohrmaschine und stationär"}]}]}

Body Drill (Karosseriebohrer) — Twist Drill, 5.3 mm, 135° point, double sided, bright finished, HSS‑G The Body Drill (Karosseriebohrer) is a double‑ended Twist Drill for Drilling Machines, designed for clean, fast metalworking and reliable performance in demanding fabrication tasks. Double-sided design for two usable tips HSS-G ground for faster, cleaner drilling 135° point for hard and stainless steels Fully ground shank for precise concentricity Bright finish for corrosion resistance Robust design for metalworking that reduces set-up and rework The double‑ended construction of this Twist Drill delivers practical efficiency: when one tip dulls, the second tip is immediately available, effectively providing two usable ends in one tool and minimising downtime. The HSS‑G material and CNC grinding produce very sharp cutting edges that generate clean, precise holes in a wide range of metals. This combination helps reduce rework and improves throughput on shop jobs that demand repeatable hole quality. Faster penetration and lower feed force for tougher materials A 135° point angle is chosen specifically for harder materials such as stainless steel and hardened alloys; it shortens the initial bite and improves tip centring. Because the flute geometry is ground rather than rolled, cutting forces are lower and drilling speed can increase compared with conventional HSS drills. For tasks requiring consistent penetration and reduced operator force, this Twist Drill delivers measurable performance benefits. Precision handling thanks to a fully ground shank The fully ground shank provides superior concentricity and runout control in chucks and collets, which results in more accurate hole placement and less vibration. This advantage is particularly relevant when using portable Drilling Machines for panel work or when registering multiple holes in assemblies. The bright finished surface aids visibility and handling while offering basic corrosion resistance during storage and light use. Clear application scope and simple maintenance advice Engineered for metalworking, the Body Drill is suitable for alloyed and unalloyed steel, cast materials, sintered iron, non‑ferrous metals and hard plastics. For best lifetime performance, use appropriate cutting fluid and moderate speeds when drilling tougher materials; avoid impact loading and consider stationary machines with coolant for prolonged or deep drilling tasks. The double‑ended format is especially convenient for thin sheet and bodywork where short, stable drill lengths are preferred. Choose MetavCUT’s precision HSS‑G Body Drill for dependable metalworking performance — for expert advice or to confirm fitment for your application, contact METAV Werkzeuge; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Body Drill (Karosseriebohrer) Brand/Manufacturer: MetavCUT SKU: 58053-FDA Model Series: Standard Line Diameter: 5.3 mm Overall Length: 62 mm Spiral/Flute Length: 16 mm Point Angle: 135° Type / Execution: double sided Shank Execution: fully ground Material: HSS-G Colour / Finish: bright finished For Use With: Drilling Machine Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill (Twist Drill) used for and where is it best applied? The Body Drill from MetavCUT is a Twist Drill designed primarily for metalworking applications; it is mainly applied when drilling high‑strength materials and larger diameters where a robust tip geometry and clean hole quality are required. Its double‑ended format suits sheet and bodywork where short, stable drills are advantageous. Which three drill types exist in common workshop use? Common drill categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Body Drill belongs to the metal drill group and is optimised for cutting metals rather than timber or stone. Why are Twist Drills pointed (sharpened) and what does that achieve? A pointed tip reduces the cross‑cut at the centre of the Twist Drill and lowers friction at the cutting edges, which decreases the required feed force; sharpening improves centring in the workpiece and helps achieve a cleaner entry and better hole accuracy with less burr formation. Can the MetavCUT Body Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Body Drill can be used in wood, but guidance and centring are generally poorer and the finish will not be as clean as with a dedicated wood bit. Metal drills are easier to resharpen and have less self‑feed, so they can serve in a pinch but are not optimised for woodworking. At which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard choice for through‑hole drilling ("drilling into solid material") and are most frequently used for diameters up to around 20 mm and depths up to approximately 100 mm; the MetavCUT Body Drill is particularly suited to such applications in metalworking. What is better, HSS or HSSE for Twist Drills? There is no universal superiority; HSSE alloys can outperform standard HSS under specific conditions, but the choice depends on the working environment and cost‑benefit analysis. For many metalworking tasks the HSS‑G grade of the MetavCUT Body Drill offers an excellent balance of sharpness and durability at a reasonable price.

Twist Drill — Extra Short, 5.3 mm, 135° tip, Type N, Bright Finished, HSS‑G, DIN 1897 by MetavCUT The Twist Drill Type N is designed for precise metal drilling with an extra‑short geometry that improves stability and performance in hand and angle drilling applications. Extra short design for improved stability HSS‑G cutting for faster metal drilling 135° tip optimized for hard materials Cylindrical shank for standard chuck compatibility Conforms to DIN 1897 for robust reliability Greater stability in confined workplaces and thin materials The extra‑short configuration reduces overhang and increases resistance to breakage, making this drill ideal when working in confined spaces or with thin sheets and profiles. The shortened overall length improves torque transmission and reduces vibration, which enhances hole quality and extends tool life. This compact design is particularly suited to handheld and angle drilling tasks where access and control matter most. Faster cutting with lower feed force thanks to HSS‑G A ground HSS‑G cutting edge accelerates metalworking tasks: up to 40% faster drilling and roughly 50% less required feed force compared with conventional HSS variants in comparable conditions. This performance advantage reduces operator effort and can shorten cycle times in manual and light industrial operations. HSS‑G is engineered for durability when machining alloyed and unalloyed steels as well as cast materials. Precise centring and suitability for hard materials The 135° tip geometry offers a reduced chisel edge and better centring on difficult surfaces, which lowers friction during entry and helps when drilling stainless steel and other hard alloys. The Type N normal spiral is the classic metalworking flute form, combining efficient chip removal with reliable cutting action. When a clear explanation is helpful: a larger tip angle distributes cutting forces over a broader area, improving life and reducing tip wear on tough materials. Universal fit and targeted applications With a cylindrical shank the drill fits most three‑jaw chucks, allowing quick preparation for standard drilling rigs and hand drills. Designed under DIN 1897 as part of the Standard Line, this tool by MetavCUT is aimed at technicians, maintenance professionals and workshop users who require dependable performance drilling metals such as steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The extra‑short format also simplifies work in assembly and repair where space is limited. For demanding metalwork choose the MetavCUT Twist Drill for its extra‑short, robust design — METAV Werkzeuge offers expert advice and technical support via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56053-FDA Diameter: 5.3 mm Tip angle: 135° Type: Type N Finish: Bright finished Execution: Extra short Material: HSS‑G Overall length: 62 mm Spiral length: 26 mm Shank execution: Cylindrical Model series: Standard Line For drilling machine: Drilling Machine Application: Drills for metal Norm: DIN 1897 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill Type N is primarily intended for metalworking and excels when drilling alloyed and unalloyed steels, cast materials and hard plastics; its extra‑short form improves stability in thin materials and confined working spaces. Can the MetavCUT Twist Drill be used in hand drills? Yes, the MetavCUT Twist Drill with a cylindrical shank is suitable for Hand and Angle Drills and fits standard three‑jaw chucks, offering universal compatibility for workshop and on‑site applications. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength workpieces and larger drill diameters; its form is easy to grind and withstands greater stresses. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills. Why are twist drills pointed? Pointing reduces the chisel edge at the tip, significantly lowering friction and required feed force while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood but generally offers poorer guidance and less clean results; however, it is easier to resharpen and has lower self‑feed tendency. For which drilling depths is the twist drill most commonly used? Solid drilling is typically performed with a twist drill; it is most common for diameters up to 20 mm and drilling depths up to 100 mm. Which is better, HSS or HSSE? The common belief that HSSE is categorically superior to HSS is incorrect; selection should consider specific working conditions to justify any higher purchase cost.

Twist Drill — Short Type N Twist Drill, 5.3 mm, 135° point, Bright Finished, HSS-G, DIN 338, Fully Ground Shank The Twist Drill Type N short is a precision metalworking drill for Drilling Machines, designed for stable, accurate holes in hard materials. Short design for increased stability 135° Point angle for hard metals Fully ground shank for high concentricity Conforms to DIN 338 standard HSS-G material for sharp, clean holes Outstanding stability for precise metal holes A shorter flute length reduces the exposed overhang and significantly increases stability during cutting, which makes this Twist Drill ideal when accuracy matters. The compact geometry lowers vibration and deflection, resulting in truer hole diameter and improved surface finish. For machinists working with tougher alloys, the reduced tendency to bend means fewer tool changes and more consistent component quality. Optimised for demanding metalworking tasks Engineered as a Type N normal-spiral drill, this short variant excels in drilling metal such as alloyed and unalloyed steel, cast iron and non-ferrous metals. The 135° point angle reduces the initial cutting forces and improves centring in hard materials, allowing safer penetration into stainless steels and tempered parts. This makes the tool suitable for both stationary machines and portable Drilling Machines used in workshop and production environments. Material and cutting performance explained Manufactured from HSS-G (ground high-speed steel), the twist geometry is produced by CNC grinding to deliver sharp cutting edges and superior run-out accuracy. Ground construction yields cleaner holes and finer chip evacuation, but requires appropriate coolant and careful handling to avoid brittle failure under shock. In practice, HSS-G offers a balance of cutting speed and edge retention for general-purpose metal drilling. Who benefits from this short Twist Drill Production engineers and maintenance technicians who demand precision in metal fabrication will find this tool particularly useful. The short design is advantageous where rigidity is limited or when drilling close to fixtures and shoulders. For those seeking a reliable standardised tool, compliance with DIN 338 ensures interchangeability and predictable performance across workshop setups. Choose MetavCUT’s short Twist Drill for exacting metalwork — for any questions about suitability or additional technical details, METAV Werkzeuge provides expert consultation and support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 45053-FDA Diameter: 5.3 mm Point angle: 135° Type: Type N Execution: short Colour: bright finished For Drilling Machine: Drilling Machine Spiral length: 52 mm Total length: 86 mm Shank execution: fully ground Model series: Standard Line Material: HSS-G Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The Twist Drill (MetavCUT Type N short) is primarily used for machining metal; it performs especially well on alloyed and unalloyed steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics, delivering precise cylindrical holes in such materials. Which three drill types are commonly distinguished? Commonly, drill types are classified as metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications. Why are Twist Drills pointed (why is the tip ground)? The sharpening of the tip reduces the cross-edge at the drill point, which significantly lowers friction and therefore the required feed force; this resharpening also improves centring of the tip in the workpiece for more accurate starts. Can the MetavCUT Twist Drill be used for drilling wood? A metal Twist Drill can be used in wood, but guidance and hole quality are typically inferior compared with purpose-made wood drills; the MetavCUT Type N short will work, yet results may be less clean and steering is reduced. For which drilling depths is the Twist Drill most often used? A bored-through hole in solid material is commonly executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE the better choice? The general belief that HSSE steels are categorically superior to HSS is incorrect; the decision should be based on actual working conditions and whether the specific advantages justify the higher investment.

Twist Drill — Type N short HSS Ø 5.4 mm, 118° tip, Black (DIN 338) by MetavCUT A short Twist Drill Type N for precise metal drilling in a Drilling Machine, designed for stable performance and clean holemaking. Short HSS design for improved stability Conforms to DIN 338 for short twist drills 5.4 mm Diameter for accurate hole tolerances 118° Tip angle for reliable centring Optimised for Drilling Machine operation High precision and efficient metal cutting for workshop use The Twist Drill in HSS construction delivers consistent cutting performance when working with alloyed and unalloyed steels, cast iron and non-ferrous metals. Its Type N normal spiral and short configuration reduce overhang and vibration, which increases rigidity and improves hole accuracy. The 118° tip angle facilitates easier entry and dependable centring on flat and slightly curved surfaces, so drilling cycles become more predictable and tool life is extended. This combination of geometry and material yields reliable results on demanding metal tasks. Stable handling and suitability for machine or hand operation Designed for use in a Drilling Machine or comparable hand-operated equipment, this short Twist Drill offers improved stability during feed and reaming operations. The reduced overall length lowers the tendency to deflect, allowing operators to maintain tighter tolerances with less scrap. Its black finish aids in visual inspection of wear, while the compact form factor supports confined working conditions. If guidance is needed for selecting the right twist drill for a specific application, METAV Werkzeuge provides expert consultation to match tool choice and machining parameters to the task. Standards, material properties and application recommendations Manufactured in accordance with DIN 338, this short HSS tool follows established tolerances and dimensional classes for cylinder-shank short twist drills. HSS (High Speed Steel) offers an elastic microstructure that reduces breakage risk when drilling holes below 6 mm diameter and performs well across a range of common workshop materials. The Type N spiral is a classic metal-drilling geometry; when combined with the short design it is particularly suited to precision holes in steel and similar alloys. For deeper or larger-diameter drilling tasks, consider using specialised long or coated variants tailored to the material and depth requirements. METAVCUT’s Twist Drill is recommended for demanding metalworking tasks — for tailored advice or further technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill (Type N), short, Ø 5.4 mm, overall length 93 mm, spiral length 52 mm, 118° tip angle, HSS, black, for Drilling Machine, DIN 338 Brand: MetavCUT SKU: 40054-FDA Diameter: 5.4 mm Spiral length: 52 mm Overall length: 93 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N (normal spiral) Execution: short Standard: DIN 338 Colour: black Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill Type N is primarily applied to the machining of high-strength materials and larger drill diameters; its form is easy to regrind and withstands higher stresses, making it suitable for robust metalworking tasks. Which three drill types exist? Three common categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill group and is optimised for those applications. Why are Twist Drills pointed? The tip is honed to reduce the cross-cut at the point of the Twist Drill, which lowers friction and therefore reduces required feed forces while improving centring accuracy in the workpiece. Can you drill wood with a metal Twist Drill? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; however, they are easier to regrind and exhibit lower self-feed tendencies. At what drilling depths is the Twist Drill most used? For through-hole drilling up to about 20 mm diameter and depths up to 100 mm, the Twist Drill is the most commonly used tool for producing cylindrical holes by material removal. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is not correct; when choosing between HSS and HSSE for a MetavCUT Twist Drill, assess whether the specific working conditions justify the higher cost of HSSE.

Body Drill (Karosseriebohrer) — Twist Drill, Double-Sided, Bright Finished, HSS‑G, Fully Ground Shank, Ø 5.4 mm, 135° The Body Drill (Karosseriebohrer) is a double-sided Twist Drill designed for metalworking with a Drilling Machine, optimised for precise sheet‑metal and rivet hole applications. Double-sided design for two usable ends HSS‑G for precise, clean holes in metal Fully ground shank for high runout accuracy 135° point angle suited for harder materials Bright finished surface for smooth chip evacuation High precision and efficient metal cutting for professional results The HSS‑G material and fully ground geometry deliver higher sharpness and improved roundness compared with rolled drills. This means the Body Drill produces clean, precise holes in a range of metals while requiring less corrective work afterwards. The ground flutes ensure consistent chip removal and a stable cutting edge, which is especially beneficial when working with alloyed or unalloyed Steel and Cast Iron. Two usable ends and shorter, robust design for bodywork A double‑sided construction gives the practical advantage of two cutting tips in one tool, making it ideal for tight workshops and repetitive tasks on thin sheets. The shorter, stable profile reduces flex during drilling in thin materials common to automotive bodywork, allowing quick reversal to the second tip when one side dulls and supporting continuous production without frequent tool changes. Match the drill geometry to the task for longer tool life The 135° point angle is chosen for drilling harder workpieces such as Stainless Steel and tempered materials; a larger point angle reduces initial dwell and improves centring on tough surfaces. For best results use a steady feed, appropriate cutting fluid and moderate speeds with a Drilling Machine. The term Twist Drill refers to the spiral‑fluted design that removes material as it cuts; here it means efficient evacuation of chips and stable penetration into metal. Who benefits from this Body Drill and when to use it Workshops, vehicle body repair shops and maintenance technicians gain most from this tool: it is designed for metal drilling, especially where rivet holes or precise through‑holes are required. The combination of HSS‑G and a bright finish suits users who prioritise dimensional accuracy and clean hole quality, while the double‑ended layout keeps inventory compact and economical for everyday production tasks. For reliable, fast and precise sheet‑metal drilling choose the MetavCUT Standard Line Body Drill — for personal technical advice or to confirm suitability contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58054-FDA Diameter: 5.4 mm Overall length: 62 mm Spiral length: 16 mm Point angle: 135° Execution: double-sided Shank execution: fully ground Material: HSS-G Colour: Bright finished For Drilling Machine: Drilling Machine (Hand drill) Model series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill (Karosseriebohrer) by MetavCUT designed for? The MetavCUT Body Drill (a Twist Drill for metal) is intended primarily for drilling in metals, especially for sheet‑metal and rivet holes; its HSS‑G construction and ground geometry give precise, clean boreholes in alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and certain hard plastics. Can the MetavCUT Body Drill be used in a standard Drilling Machine? Yes, the Body Drill is made for use with a Drilling Machine (hand drill or bench drill); to preserve tool life, use controlled speeds, appropriate coolant and steady feed—especially when working in harder materials suited to the 135° point angle. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength workpieces and larger drill diameters; this shape is easy to resharpen and withstands higher loads. Its ground HSS form can deliver up to 40% faster drilling with reduced feed force compared with conventional HSS, making it well suited to metalworking and bodywork applications. Which three drill types exist? There are three main drill types: Metal drills, Wood drills, and Stone/Concrete drills.

Twist Drill — Type N · 5.4 mm · 135° · Extra short · Bright finished · HSS‑G · DIN 1897 · MetavCUT The Twist Drill by MetavCUT is an extra‑short Type N metal drill designed for precise, stable drilling in hand and angle drilling machines. Extra‑short design for higher stability 135° tip for hard materials HSS‑G ground for faster drilling Cylindrical shank fits standard chucks Greater Stability and Faster Penetration for Metalwork The extra‑short design gives this drill improved stability and reduced breakage risk compared with standard lengths. For workshop tasks where space is limited or walls are thin, the shorter overall length provides greater torsional rigidity and easier handling in a Hand Drilling Machine. The ground HSS‑G cutting geometry reduces required axial force and allows up to 40% faster drilling in many steels, which translates to more efficient working cycles and less operator fatigue. Better Entry and Longevity on Tough Materials Equipped with a 135° tip, the drill reduces chipping and improves centring when working with harder metals such as stainless and alloyed steels. A larger tip angle shortens the initial entry time and lowers the tendency to wander on the surface. The Type N spiral is the classic metal geometry, optimised for cutting performance in ferrous materials while maintaining durability under higher loads. Universal Fit and Practical Use Cases A smooth cylindrical shank ensures compatibility with standard three‑jaw chucks found on handheld and bench drilling machines. While universally fitting, users should be aware that cylindrical shanks can slip under very high torque; for such applications, alternative shank forms may be preferable. This tool is particularly suitable for drilling alloyed and unalloyed steel, cast and sintered irons, non‑ferrous metals and hard technical plastics where clean, reliable holes are required. Handling, Sharpening and Application Advice The extra‑short twist drill is straightforward to resharpen and maintain, which keeps lifecycle costs down. By slightly regrinding the point (reducing the web thickness), cutting forces fall and centring improves, meaning less feed force is needed and the drill stays steadier in the hole. For best results, use appropriate cutting speeds and coolant for the workpiece material and ensure the chuck is properly tightened to avoid slippage. MetavCUT’s Twist Drill combines compact robustness with high metal‑cutting performance — for personalised tool advice or application support please contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel. +49 2822 7131930 · WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 56054-FDA Diameter: 5.4 mm Tip angle: 135° Type: Type N Finish: Bright finished Execution: Extra short Material: HSS-G Shank execution: Cylindrical Overall length: 62 mm Spiral length: 26 mm Norm: DIN 1897 Application: Drills for metal Model series: Standard Line Intended machine: Drilling Machine (Hand Drill) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill suitable for stainless steel and hardened metals? The MetavCUT Twist Drill (Type N) with its 135° tip is especially suited to harder workpiece materials; the larger tip angle improves centring and reduces chipping, making it a good choice for many stainless and alloyed steels when used with correct cutting speeds and coolant. Which machines work best with this Twist Drill from MetavCUT? This Twist Drill is intended for use in a Hand Drilling Machine or similar drilling equipment; the cylindrical shank fits standard three‑jaw chucks, making it convenient for portable and bench drilling tasks. For what is a Twist Drill used? A Twist Drill is mainly employed for machining high‑strength materials and larger hole diameters. Its form is easy to resharpen and it withstands substantial loads, which makes it suitable for demanding metalworking operations. Which 3 drill types are there? There are three primary drill types to consider: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills sharpened at the point? Point sharpening reduces the web thickness at the tip, which lowers friction and cutting forces; this means less feed force is necessary and the drill centres better in the workpiece, improving hole quality. Can a metal drill be used for wood? A metal drill can be used in wood, but guidance and finish are usually inferior to a dedicated wood drill. Metal drills are easier to resharpen and have less self‑feeding action, so results may vary. At what drilling depths is the Twist Drill most commonly used? Twist Drills are the standard tool for through‑hole drilling and are most commonly applied for diameters up to about 20 mm and hole depths up to roughly 100 mm, covering most routine metal drilling tasks. Is HSS or HSSE better for my application? The blanket assumption that HSSE steels are always superior to HSS is incorrect. Choice should be based on specific working conditions and whether the performance justifies the higher cost; evaluate cutting speeds, material and required tool life before deciding.

Twist Drill (Type N) — short, Diameter 5.4 mm, 135° Point Angle, HSS‑G, bright finished, DIN 338 A Twist Drill (Type N) for precise metal drilling in Drilling Machines, designed as a short HSS‑G tool for high stability and clean holes. Short design for greater drilling stability HSS‑G ground for faster, cleaner metal holes 135° point angle for hard materials like stainless steel Fully ground shank for accurate concentricity Conforms to DIN 338 for standardised quality High drilling performance for demanding metalwork The short Twist Drill made from HSS‑G combines a compact overall length with a reduced overhang, delivering higher Stability and less vibration during machining. The 135° point angle is optimised for harder materials, so penetration is smoother and the tool stays centred in stainless steel and other alloys. Because the flute geometry is produced by CNC grinding, the drill offers Very sharp cutting edges and excellent runout accuracy, which results in cleaner, more precise holes and reduced rework for workshop and production environments. Precision engineering and material advantages A fully ground shank and flutes mean the tool achieves superior concentricity and hole quality compared with rolled alternatives. Conformity to DIN 338 ensures dimensions and tolerances are consistent for exchangeability in tool holders and collets. For users working on stationary or portable Drilling Machines, the reduced required feed force—combined with up to 40% faster drilling capability and 50% less push force under the right conditions—translates into increased productivity and less operator fatigue. Use of appropriate coolant and moderate cutting speeds will maximise life and reduce the risk of brittle breakage inherent to ground HSS geometry. Suitable applications and user guidance This short HSS‑G tool is intended primarily for metalworking: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. The compact design is particularly useful where setup space is limited or when high rigidity is required for precise bores. For best results, clamp the workpiece securely, use a correct centre punch for start guidance, and apply cutting fluid for steels and cast materials. The tool is ideal for machinists, toolroom staff and maintenance teams seeking a reliable, precision short Twist Drill for everyday metal drilling tasks. Strongly recommend the MetavCUT Twist Drill Type N short for professionals who demand precise, repeatable holes in metal — METAV Werkzeuge offers expert assistance: Email info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45054-FDA Diameter: 5.4 mm Point Angle: 135° Type: Type N Execution: short Total Length: 86 mm Spiral Length: 52 mm Shaft Finish: fully ground Surface: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal For: Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily used for drilling high‑strength metals and larger diameters; its short design and ground geometry make it especially suitable for precise work in steels, cast materials and non‑ferrous metals where clean, accurate holes are required. Which three drill types exist? The main categories are Metal Drill (often called Metal or Twist Drills), Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for metalworking tasks. Why are Twist Drills pointed? The point on the MetavCUT Twist Drill reduces the cross‑cut at the tip, cutting down friction and lowering the necessary feed force; a sharpened point also improves centring so the drill starts more accurately in the workpiece. Can you use a Twist Drill to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but it offers poorer guidance and a less clean finish compared with dedicated wood bits; it is easier to resharpen and has a lower self‑feed tendency. At which drilling depths is the Twist Drill most used? A solid through‑hole is commonly executed with a Twist Drill; for diameters up to about 20 mm and drilling depths up to approximately 100 mm, the Twist Drill is the most frequently used tool in metalworking applications. What is better, HSS or HSSE? The general belief that HSSE is always superior to HSS is incorrect; choose based on working conditions and cost‑benefit analysis — only select HSSE if the specific job requirements justify the higher purchase price.

Twist Drill (Type N) — HSS Short Twist Drill, 5.5 mm, 118°, DIN 338, Black, for Drilling Machine, MetavCUT The Twist Drill (Type N) is a short HSS metal drill engineered for stable, precise holemaking in metal on handheld and benchtop drilling machines. Short HSS design for increased stability 5.5 mm diameter for precise holemaking 118° tip for reliable centring Conforms to DIN 338 for consistent quality Optimised for use with Drilling Machine High-performance HSS body for reliable metalworking The HSS composition of this Twist Drill provides a balanced combination of elasticity and wear resistance suitable for standard metalworking tasks. Manufactured to deliver predictable cutting behaviour, the HSS material reduces the risk of brittle fracture when drilling holes below 6 mm diameter and supports clean machining in both alloyed and unalloyed steels. This material choice results in a tool that is easier to resharpen and that maintains edge integrity during routine workshop use Precise centring and efficient cut formation with 118° tip A 118° tip angle promotes good initial centring and controlled chip formation when working with softer metals and common engineering steels. The Type N normal spiral geometry ensures consistent chip evacuation and reduced tendency to wander on curved or slightly uneven surfaces. For applications that demand accurate positioning, this tip geometry lowers the required feed force and supports more repeatable hole locations on finished parts Short execution for greater stability and accuracy The short overall design reduces overhang and increases rigidity, which directly improves hole quality on both portable and stationary drilling equipment. Conforming to DIN 338, the short configuration minimises deflection and vibration, making the tool particularly suitable for precision operations and for use in fixtures or jigs. This stabilising effect is a key benefit when working with small diameters where accuracy and roundness matter most Designed for metalworkers and general workshop use Intended primarily as a Drill for Metal, this short HSS twist drill is aimed at technicians, maintenance staff and machinists seeking a dependable everyday tool. The Type N spiral is the classic choice for general metal drilling and fits well into common work routines, from prototype fabrication to repair tasks. When application-specific guidance is needed, METAV Werkzeuge offers competent technical consultation to ensure the right tool choice for the job For reliable metal drilling with a focus on stability and repeatable results, choose the MetavCUT Twist Drill Type N and contact METAV Werkzeuge for personalised technical advice — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40055-FDA Diameter: 5.5 mm Tip angle: 118° Spiral length: 52 mm Overall length: 93 mm Material: HSS Type: Type N Execution: short Colour: black Application: Drills for metal For drilling machine: Drilling Machine Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill primarily used for? The MetavCUT Twist Drill (Type N) is primarily used for the machining of high-strength materials and for larger drill diameters in metalworking. This design is easy to resharpen and remains stable under higher loads, which makes it suitable for demanding metal-drilling tasks. Which three drill types are commonly distinguished? When selecting tools, the common classification comprises Metal Drills, Wood Drills and Stone/Concrete Drills. The MetavCUT Twist Drill (Type N) belongs to the Metal Drills group and is optimised for drilling in metals. Why are Twist Drills pointed? The point sharpening reduces the cross-cut at the tip of the Twist Drill, which markedly lowers friction and therefore reduces the required feed forces. In addition, the sharpened tip improves centring of the tool in the workpiece, helping to achieve cleaner and more accurate holes when using the MetavCUT Twist Drill (Type N). Can a Twist Drill be used in wood? A Metal Drill such as the MetavCUT Twist Drill (Type N) can be used in wood, but guidance and finish quality are inferior compared with dedicated wood drills. Metal drills have less guidance and produce a less clean hole, though they are easier to resharpen and exhibit lower self-feed tendencies.

Karosseriebohrer 5,5 mm – HSS‑G, 135°, doppelseitig, blank, geschliffen Der Karosseriebohrer ist ein doppelseitiger HSS‑G Bohrer für präzises Bohren in Metall und eignet sich besonders für Handbohrmaschinen bei Karosserie‑ und Blecharbeiten. Karosseriebohrer 5,5 mm für Metallarbeiten HSS‑G geschliffen für präzise Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Doppelseitige Ausführung: Beidseitig einsetzbar Spiralänge 16 mm, Gesamtlänge 66 mm, blankes Finish Höhere Effizienz durch geschliffene HSS‑G Geometrie Bei diesem Bohrer sorgt die HSS‑G Qualität und die geschliffene Schaftausführung für sehr scharfe Schneiden und eine gleichmäßige Spänebildung. Die geschliffene Geometrie ermöglicht in vielen Anwendungen ein bis zu 40 % schnelleres Bohren bei gleichzeitig deutlich reduzierter Anpresskraft, was besonders bei häufigen Bohrungen Zeit und Energie spart. Für Anwender bedeutet das weniger Ermüdung bei der Handhabung und eine höhere Wirtschaftlichkeit bei wiederkehrenden Metallarbeiten. Geeignet für Handbohrmaschinen und typische Metallanwendungen Der Bohrer mit 5,5 mm Durchmesser fällt in den Standard‑Bereich und ist ideal für dünne bis mittlere Bleche, Profile und Stahlbleche. Die Spitzenwinkel 135° reduzieren das Anlaufrutschen auf harten Werkstoffen wie Edelstahl und Guss, während die Spiralänge von 16 mm Schlagkraft und Spanabfuhr für flache bis mitteltiefe Löcher bietet. Vor dem Bohren empfiehlt sich bei präzisen Passungen das Anpünkteln mit einem Zentrierbohrer, um Wandern zu vermeiden. Praktisches Design: doppelseitig und robust einsetzbar Die doppelseitige Ausführung erlaubt das Wenden des Bohrers, wenn eine Spitze stumpf geworden ist, wodurch die Nutzungsdauer effektiv verlängert wird. Die blanke Oberfläche unterstützt das Entweichen von Spänen und erleichtert die Sichtkontrolle beim Bohren. Durch die kurzen, stabilen Abmessungen ist der Bohrer besonders geeignet für Karosseriearbeiten, Nietlöcher und Anwendungen, bei denen hohe Stabilität und schnelle Wechsel gefragt sind. Anwendungshinweise und Sicherheitsempfehlungen Für optimale Ergebnisse empfiehlt sich der Einsatz mit geeigneter Schmier‑ oder Kühlmittelzufuhr und moderater Drehzahl, um Überhitzung und schlagartige Belastung zu vermeiden. Bei Handgebrauch sollten Spannfutter sauber und zentrisch gespannt sein, um Bruchrisiken zu minimieren. Bei Unsicherheiten zur Eignung für spezielle Werkstoffe oder Anwendungen bietet Metav Werkzeuge kompetente Beratung und technische Unterstützung per E‑Mail oder Telefon. Kaufempfehlung: Den MetavCUT Standard Line Karosseriebohrer mit HSS‑G für belastbare und effiziente Metallbohrungen wählen – Beratung und Bestellung über info@metav-werkzeuge.com oder Tel. +49 2822 7131930 Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58055-FDA Durchmesser: 5,5 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: doppelseitig Farbe: blank Schaft-Ausführung: geschliffen Spiralänge: 16 mm Gesamtlänge: 66 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet? Der Karosseriebohrer von MetavCUT mit Spitzenwinkel 135° und HSS‑G Material eignet sich für viele harte Werkstoffe wie Edelstahl; bei hochlegierten oder sehr zähen Stählen sollten reduzierte Schnittgeschwindigkeiten und Kühlung eingesetzt werden. Kann ich den Karosseriebohrer mit einer Handbohrmaschine verwenden? Ja, der Karosseriebohrer ist für den Einsatz in Handbohrmaschinen vorgesehen; auf korrekten Rundlauf und feste Spannfutterspannung achten, um Bruchrisiken zu minimieren. Wie verlängere ich die Lebensdauer des MetavCUT Karosseriebohrers? Die Lebensdauer lässt sich durch ausreichende Kühlung, moderate Drehzahlen und die Nutzung der beidseitigen Ausführung erhöhen; bei Verschleiß kann die Spitze gewendet werden. Worin unterscheidet sich ein geschliffener HSS‑G Bohrer von einem gewalzten Bohrer? Ein geschliffener HSS‑G Bohrer bietet schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu präziseren und saubereren Bohrlöchern führt; gleichzeitig ist er empfindlicher gegen Schlagbelastungen und sollte mit entsprechender Vorsicht eingesetzt werden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58055-FDA","sku":"58055-FDA","mpn":"58055-FDA","gtin13":"","name":"Karosseriebohrer 5,5 mm – HSS-G, doppelseitig, blank, geschliffen","description":"Karosseriebohrer 5,5 mm aus HSS-G, doppelseitig geschliffen, Spitzenwinkel 135°, Spiralänge 16 mm, Gesamtlänge 66 mm; ideal für Handbohrmaschinen und Blecharbeiten, robuste blanke Oberfläche, erhöhte Effizienz und Präzision bei Metallbohrungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"58055-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spiralänge","value":"16 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"66 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Preis netto","value":"1.79"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer 5,5 mm von MetavCUT aus HSS-G mit Spitzenwinkel 135° eignet sich für viele harte Werkstoffe wie Edelstahl; bei hochlegierten oder sehr zähen Stählen sollten reduzierte Schnittgeschwindigkeiten und Kühlung eingesetzt werden."}},{"@type":"Question","name":"Kann ich den Karosseriebohrer mit einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Karosseriebohrer 5,5 mm von MetavCUT ist für den Einsatz in Handbohrmaschinen vorgesehen; auf korrekten Rundlauf und feste Spannfutterspannung achten, um Bruchrisiken zu minimieren."}},{"@type":"Question","name":"Wie verlängere ich die Lebensdauer des MetavCUT Karosseriebohrers?","acceptedAnswer":{"@type":"Answer","text":"Die Lebensdauer des Karosseriebohrers 5,5 mm von MetavCUT lässt sich durch ausreichende Kühlung, moderate Drehzahlen und die Nutzung der beidseitigen Ausführung erhöhen; bei Verschleiß kann die Spitze gewendet werden."}},{"@type":"Question","name":"Worin unterscheidet sich ein geschliffener HSS-G Bohrer von einem gewalzten Bohrer?","acceptedAnswer":{"@type":"Answer","text":"Ein geschliffener HSS-G Bohrer wie der Karosseriebohrer 5,5 mm von MetavCUT bietet schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu präziseren und saubereren Bohrlöchern führt; gleichzeitig ist er empfindlicher gegen Schlagbelastungen und sollte mit entsprechender Vorsicht eingesetzt werden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-58055-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer Serie"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"Bohrer für Metall"}],"mentions":[{"@type":"Thing","name":"Doppelseitige Ausführung"},{"@type":"Thing","name":"Spitzenwinkel 135°"},{"@type":"Thing","name":"Spiralänge 16 mm"},{"@type":"Thing","name":"Geschliffener Schaft"}]}]}

Twist Drill — Twist Drill 5.5 mm | Extra Long | HSS‑G | 135° | Bright Finished The Twist Drill is an extra long HSS‑G metal drill bit (5.5 mm) designed for deep, precision drilling in hardened and unalloyed steels and other demanding materials. Extra long geometry for deep holes 135° tip angle for harder materials Fully ground shank for high concentricity HSS‑G material for fast cutting in metal Conforms to DIN 1869 for deep‑hole performance Superior Cutting Performance for Tough Metals The HSS‑G construction delivers a combination of hardness and toughness that enables faster chip removal and longer edge life when working with metal. The 135° tip angle reduces walking on hard surfaces and improves entry when drilling stainless steel or tempered materials. This geometry is particularly effective for tasks where a clean, precise hole is required rather than aggressive material removal. Designed for Deep and Hard‑to‑Reach Holes With an extra long overall length and a deep‑spiral flute design, this drill is optimised for extended reach in installations and fixtures. The extended spiral length supports reliable chip evacuation during deep drilling, lowering the risk of clogging; this makes the bit suitable for deep bore operations in components where access is limited or standard lengths are insufficient. Precision Shank and Stable Runout A fully ground shank and CNC‑ground flute geometry ensure high concentricity and precise cutting edges. The ground manufacturing process yields sharper cutting lips and improved dimensional accuracy, producing cleaner holes in metal. For stationary or machine use with adequate cooling, the ground finish provides superior performance over rolled alternatives. Practical Application and Material Range This Twist Drill is engineered primarily for metalworking: legated and unlegated steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The DIN 1869 standard and the HSS‑G specification indicate suitability for drilling into materials up to 1000 N/mm² when operated under appropriate speeds and coolant conditions. For less critical tasks or soft materials, consider standard‑geometry drills for easier guidance. Who Benefits Most from This Tool Workshop professionals, maintenance technicians and machine operators who require dependable performance for deep metal drilling will benefit from the combination of extra length, high cutting speed and precision finish. The bit is suitable for use in a Drilling Machine or robust hand drilling equipment, provided speed and feed are adapted to material and cooling is used for sustained tool life. I strongly recommend the MetavCUT Twist Drill for demanding deep‑hole metalworking applications — for personalised advice or supplementary technical data please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 32055-FDA Diameter: 5.5 mm Overall length: 205 mm Spiral length: 140 mm Tip angle: 135° Material: HSS‑G Finish: Bright finished Execution: Extra long Shank finish: Fully ground Standard: DIN 1869 Suitable for: Drilling Machine (Handbohrmaschine) Model series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Twist Drill? The MetavCUT Twist Drill (Twist Drill) is primarily used for drilling in metal; its HSS‑G composition and 135° tip angle make it suitable for legated and unlegated steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, offering faster penetration and improved centring in harder materials. Which three drill types exist? Common drill types include Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.

MetavCUT Twist Drill — Extra Long HSS‑G Twist Drill, 5.5 mm, 135° Point, DIN 1869, Bright Finished The MetavCUT Twist Drill is an extra‑long, fully ground HSS‑G drill bit designed for deep metal drilling with a 135° tip angle and bright finished surface for improved chip evacuation. MetavCUT Twist Drill Standard Line Extra‑long design for deep or hard‑to‑reach holes 5.5 mm Diameter with 135° Point Angle HSS‑G, fully ground for precise metal drilling DIN 1869 conformity and bright finished surface Faster deep drilling with less feed force The extra‑long HSS‑G geometry of this Twist Drill reduces required Anpresskraft significantly: the ground HSS design enables up to 40% faster drilling while needing about 50% less feed force than conventional HSS bits. With a Spiral Length of 180 mm and a Total Length of 260 mm the bit reaches deep positions without extensions or special holders. This efficiency translates into shorter cycle times on production jobs and less operator fatigue in workshop tasks. Reliable performance in hard and alloyed metals For demanding materials the combination of HSS‑G and a 135° point angle ensures stable starts and controlled cutting in Grauguss, legierten and unlegierten Stahl, Gusseisen and non‑ferrous metals. The DIN 1869 specification and the reinforced tip geometry make this bit suitable where consistent hole quality is required. When working with tougher steels the flattened tip reduces walking and shortens the Anbohrzeit, so holes are truer and require less rework. Precision by fully ground geometry and bright finish The Twist Drill is fully ground (HSS‑G), meaning the flutes and cutting edges are produced by CNC grinding rather than rolling. That process creates very sharp edges and high Rundlaufgenauigkeit, resulting in clean, precise bores. The bright finished surface improves chip flow and prevents rapid built‑up edge formation. Note: ground bits can be less tolerant to shock loads than rolled types, so use steady feeds and, where appropriate, coolant to extend life. Practical use, maintenance and recommended machines Designed for use in Drilling Machines and hand drills where deep bores are required, the bit performs best with moderate cutting speeds and sufficient lubrication or coolant on hard materials. Regrinding is possible but should respect the original 135° geometry to keep performance. This Twist Drill is aimed at professional workshops, toolrooms and maintenance departments that value accuracy in deep drilling. If uncertain about speeds or feed rates for a specific alloy, METAV Werkzeuge offers competent technical advice. For precision deep‑metal drilling choose the MetavCUT Twist Drill with its extra‑long HSS‑G design — for further technical guidance or application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33055-FDA Diameter: 5.5 mm Point Angle: 135° Execution: extra long Colour / Finish: bright finished Shaft Execution: fully ground Spiral Length: 180 mm Total Length: 260 mm Material: HSS‑G Norm: DIN 1869 Model Series: Standard Line Application: Drills for metal Suitable For: Drilling Machine / Hand Drill Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill is primarily intended for drilling in high‑strength and alloyed metals; it excels when producing deep holes and is especially suited to materials such as cast iron, alloyed and unalloyed steel, sintered iron and hard plastics. Can the MetavCUT Twist Drill be used in a hand drill or only in stationary machines? The MetavCUT Twist Drill can be used in both Drilling Machines and hand drills; for the best hole quality and tool life, a stationary machine with steady feed and coolant is recommended, while portable use should avoid shock loading. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. The form is easy to regrind and withstands higher loads, making it suitable for demanding metalworking operations. Which three drill types exist? The three common drill types are Metal drills, Wood drills and Masonry/Concrete drills. Why are Twist Drills re‑pointed (ausgespitzt)? Re‑pointing reduces the cross‑cut at the tip; by sharpening the tip the Reibkräfte are markedly lowered and less feed force is required, while the drill centers better in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal drills are easier to regrind and show less self‑feeding, so the hole surface may be rougher.

Twist Drill — Twist Drill (Spiralbohrer), Ø 5.5 mm, 135° Point, Bright Finished, Extra Long, HSS‑G, DIN 1869 The Twist Drill is an extra long metalworking Twist Drill designed for deep and precise holes in alloyed and unalloyed Steel, Cast Iron and Hard Plastics when used in a Drilling Machine. Extra long overall length for deep holes CNC ground flutes for high accuracy 135° Point Angle for harder materials HSS‑G Material for sharp, durable cutting edges Bright finished surface for smooth chip evacuation Faster, more powerful drilling in tough materials Dank der HSS‑G Legierung ermöglicht dieser Twist Drill deutlich schnellere Schnitte bei reduziertem Anpressdruck. Entwickelt nach DIN 1869, sorgt der 135° Point Angle für einfacheren Anbohrvorgang in harten Werkstoffen wie Edelstahl oder gehärteten Stählen. Diese Kombination aus Material und Geometrie reduziert Verschleiß und verbessert die Bohrqualität, sodass präzise Bohrlöcher mit sauberem Spanbild erzielt werden können. Reach deep or hard-to-access positions with extra length Die Extra‑Long Ausführung mit einer Overall Length von 330 mm und einer Spiral Length von 225 mm ermöglicht Bohrungen in größeren Tiefen und an schwer zugänglichen Stellen. Der vollständig geschliffene Schaft und die geschliffenen Spannuten garantieren hohe Rundlaufgenauigkeit und saubere Bohrbilder, was speziell bei Metallbearbeitung in Werkzeugbau und Instandhaltung den Unterschied macht. “Fully Ground” bedeutet, dass die Geometrie durch CNC‑Schliff erzeugt wird, was schärfere Kanten und bessere Präzision zur Folge hat. Recommended use and handling for reliable results Für den Einsatz in stationären Drilling Machines oder handgeführten Bohrmaschinen ist eine kontrollierte Kühlung und stabile Werkstückspannung wichtig, da geschliffene HSS‑Bohrer sehr scharf, aber spröder sein können. Anwender sollten den Twist Drill mit moderater Vorschubkraft und geeigneter Kühlschmierstoffzufuhr verwenden, um Bruchrisiken zu minimieren und die Standzeit zu erhöhen. Die Ausführung eignet sich besonders für professionelle Anwender in Werkstätten und Fertigungslinien. Strong recommendation from MetavCUT: For deep metal drilling choose this extra long Twist Drill — METAV Werkzeuge offers expert consultation to ensure the right tool for your task. Contact METAV Werkzeuge for personalised support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Specifications for precise deep metal drilling Designation: Twist Drill Brand: MetavCUT SKU: 34055-FDA Diameter: 5.5 mm Overall Length: 330 mm Spiral Length: 225 mm Point Angle: 135° Material: HSS‑G Execution: Extra Long Shaft Execution: Fully Ground Colour: Bright Finished Type: For Drilling Machine Norm: DIN 1869 Model Series: Standard Line Application: Drills for Metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can I drill with the Twist Drill by MetavCUT and which machines suit it best? The MetavCUT Twist Drill is optimised for Metal machining and performs well in Alloyed and Unalloyed Steel, Cast Iron and Hard Plastics when used in a suitable Drilling Machine. For best results use steady clamping and coolant to maintain tool life. For what is a Twist Drill mainly used? A Twist Drill is primarily applied to the machining of highly stressed materials and larger drill diameters. Its shape allows relatively simple resharpening and it withstands high loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three main drill types are Metal Drill, Wood Drill and Stone/Concrete Drill.

Twist Drill (Type N) — 5.5 mm, 135° tip, Extra Short, Bright Finished, HSS-G, DIN 1897 — by MetavCUT The Twist Drill Type N is an extra-short HSS-G metal drill designed for Hand and Angle Drilling Machines to deliver stable, high-performance holes in confined or thin-walled workpieces. Extra-short design for higher stability 135° tip for hard and alloyed steels HSS‑G material for prolonged tool life Cylindrical shank fits standard chucks Suited to hand and angle drilling in metal Greater Stability and Safer Drilling in Tight Spaces The Extra-short geometry reduces overall length while keeping the Flute and cutting geometry effective; this increases Stability and lowers the risk of breakage when working in confined areas or with thin sheets. For tasks like drilling profiles, plates or assemblies where space is restricted, the compact design translates into more controlled handling and clearer alignment, which reduces rework. The designation DIN 1897 signals conformity with the short-length variant of the standard, aiding in reliable tool selection. Faster Cutting and Lower Feed Force on Tough Materials A 135° tip and the Type N normal spiral combine to make chip formation and penetration more gradual on harder materials. The HSS‑G construction ensures toughness with good wear resistance; tests with similar ground HSS drills show up to 40% faster drilling with about 50% less feed force compared with conventional HSS blanks. This means less operator fatigue and smoother results when machining Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. Reliable Fit and Practical Use in Workshops The Cylindrical Shank is compatible with standard Three‑Jaw Chucks, so the twist drill is easy to mount in common handheld and benchtop drilling machines. With an Overall Length of 66 mm and a Flute Length of 28 mm, the geometry is optimised for typical metalworking tasks while keeping bending forces low. The bright finish simplifies chip evacuation and inspection. Note that a smooth cylindrical shank can slip under very high torque; using a well‑clamped chuck and appropriate speeds avoids this. Who Benefits from This Choice Maintenance technicians, sheet‑metal workers and general workshops will value the combination of compactness and material capability. The tool is particularly beneficial when drilling in assemblies, thin wall components or areas where a full‑length drill cannot be used. For those who need a universal, robust solution for metal drilling with easy mounting in standard chucks, this model from the Standard Line offers dependable performance. How the Technology Works — Simple Explanation for Everyday Use Type N describes the classic normal spiral suited for metalwork; the larger 135° tip angle reduces the aggressiveness of the cut, which helps with centring and decreases tool wander in tough materials. HSS‑G is a high‑speed steel grade with improved grinding quality and heat resistance compared with basic HSS, making it a pragmatic choice for general metal drilling. If centring is critical, a pilot or spot drill can be used before final hole drilling to ensure maximum accuracy. Strong recommendation: For stable, efficient metal drilling in constrained spaces choose the MetavCUT Twist Drill Type N with Extra Short execution — for personalised technical advice or to confirm fit for a specific application contact METAV Werkzeuge; comprehensive consultation is available by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical Details for Exact Matching Designation: Twist Drill Brand: MetavCUT SKU: 56055-FDA Diameter: 5.5 mm Tip Angle: 135° Type: Type N Execution / Length: Extra Short Material: HSS‑G Standard: DIN 1897 Finish / Colour: Bright Finished Shank Design: Cylindrical Overall Length: 66 mm Flute Length: 28 mm Intended Machine: Drilling Machine (Hand / Angle Drills suitable) Application: Drills for Metal Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for drilling through high‑strength materials and for larger hole diameters in metalworking; its form allows straightforward resharpening and it endures higher loads, making it suitable for alloys, cast materials and hard plastics in workshop and maintenance environments. Which three drill types exist? Commonly differentiated drill types are Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Twist Drill falls into the metal drill category designed specifically for metalworking applications.