Twist Drill Type N — Short HSS-G, 5.5 mm, 135° Tip, Bright Finished The Twist Drill Type N is a short, fully ground metalworking drill designed for precision drilling in hardened materials and use with a Drilling Machine. Short design for enhanced rigidity and precision 135° tip for demanding and hardened materials HSS‑G fully ground for sharpness and clean holes Conforms to DIN 338 for standardised quality Suitable for Drilling Machine and metal applications Precision and Material Quality for Clean Metal Holes The short Twist Drill from MetavCUT is manufactured from HSS‑G, providing exceptionally sharp cutting edges thanks to CNC grinding. This fully ground shank geometry yields high roundness accuracy and produces clean, burr‑reduced holes in metal. Because the flute geometry is ground rather than rolled, users gain improved concentricity and hole quality, which is especially important when subsequent machining steps or press‑fits demand consistent tolerances. Stability and Performance for Tough Materials A reduced overall length and shorter protrusion from the chuck significantly increase stiffness and reduce deflection, making this short Twist Drill ideal for precise work in harder materials. The 135° tip is optimised for stainless steels and other tough alloys, shortening the initial bore time and improving centring. According to manufacturer data, the ground HSS design can deliver up to 40% faster drilling while requiring about 50% less feed force compared with conventional HSS drills, which directly reduces operator effort and cycle time. Application Focused: Metalworking and Machine Use Designed primarily as a metal drill, this Twist Drill (Type N) suits a wide range of ferrous and non‑ferrous materials including alloyed and unalloyed steels, cast steels, cast irons, sintered irons, non‑ferrous metals and hard plastics. Its configuration targets stationary and portable Drilling Machines where high accuracy and repeatability matter. Operators seeking reliable performance for workshop production or repair tasks will find the short axial length advantageous for minimising runout and improving tool life under controlled cooling. Handling, Limitations and Best Practices Because ground HSS drills tend to be sharper and less ductile than rolled versions, they can exhibit greater brittleness under inappropriate use. It is recommended to use adequate cooling and support, avoid excessive overhang, and prefer machine setups that limit vibration. The DIN 338 classification confirms standard dimensions and tolerances for short cylindrical‑shank twist drills, simplifying tool selection and replacement across toolholders and machines. We recommend the MetavCUT short Twist Drill Type N for demanding metalworking tasks — for personalised advice or complementary technical data contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill (Short) Brand / Manufacturer: MetavCUT SKU: 45055-FDA Diameter: 5.5 mm Tip Angle: 135° Type: Type N Colour / Finish: Bright Finished Version / Execution: Short Shank Execution: Fully Ground Material: HSS‑G Standard / Norm: DIN 338 Spiral Length: 57 mm Overall Length: 93 mm Intended Use: Drills for Metal Suitable For: Drilling Machine (Handbohrmaschine) Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and ground geometry make it well suited to demanding metalworking tasks and produce precise, clean holes even in hard materials. Can the MetavCUT Twist Drill Type N be used in a Drilling Machine for stainless steel? Yes, the MetavCUT Twist Drill Type N with a 135° tip is especially intended for harder materials such as stainless steel, offering improved centring and reduced initial penetration time when used in a properly set up Drilling Machine. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their geometry allows relatively easy regrinding and they withstand higher loads. Which three main drill types exist? The three primary drill types are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened at the point? Point sharpening reduces the cross‑edge at the tip of the Twist Drill, which substantially lowers friction and therefore requires less feed force; at the same time the sharpened tip centres the drill more reliably in the workpiece. Can metal Twist Drills be used to drill wood? Metal Twist Drills can be used in wood, but they typically provide poorer guidance and a less clean hole compared with dedicated wood drills; however, they are easier to resharpen and show less self‑feeding.

Spiralbohrer – kurz, 5,5 mm, 135°, Typ N, TIN-beschichtet, HSS‑G, DIN 338 von MetavCUT Der Spiralbohrer in kurzer Ausführung ist ein geschliffener HSS‑G Bohrer mit 5,5 mm Durchmesser für präzise Metallbohrungen in legierten und unlegierten Stählen sowie Nichteisenmetallen. HSS‑G geschliffen für präzise Metallbohrungen TIN‑Beschichtung reduziert Reibung und Verschleiß 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung für hohe Stabilität und Rundlauf Geeignet für Handbohrmaschinen und stationären Einsatz Effiziente Zerspanung dank TIN‑Beschichtung und Geometrie Die Kombination aus HSS‑G Material und TIN‑Beschichtung sorgt für höhere Standzeit und gleichbleibende Leistung beim Bohren von Metall. Durch den geschliffenen Schneidensatz dringt der Bohrer sauber in Werkstoffe ein, was in vielen Anwendungen ein bis zu 40 % schnelleres Bohren ermöglicht und gleichzeitig etwa 50 % geringere Anpresskraft erfordert. Diese Eigenschaften reduzieren Maschinenlaufzeiten und verbessern die Prozesssicherheit bei Serien- und Einzelfertigung. Mehr Stabilität durch kurze Ausführung und optimierte Länge Die kurze Ausführung mit einer Spirallänge von 57 mm und einer Gesamtlänge von 93 mm minimiert das Auskragen aus dem Bohrfutter und erhöht so die Steifigkeit. Dadurch werden Abweichungen beim Rundlauf reduziert und exaktere Bohrungen erzielt. Anwender profitieren insbesondere bei Bohrungen in dicken oder harten Werkstoffen von der besseren Kraftübertragung und der verringerten Neigung zum Verbiegen. Vielseitiger Einsatzbereich für Metallbearbeitung Dieser Kurzspiralbohrer ist nach DIN 338 ausgeführt und als Typ N Normalspirale für eine breite Palette an Metallen geeignet. Dazu zählen legierter und unlegierter Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber. Die Ausführung macht den Bohrer zur passenden Wahl für Werkstatt, Montage und industrielle Anwendungen, in denen saubere, präzise Löcher gefordert werden. Anwendungshinweise für längere Lebensdauer und Präzision Bei Verwendung eines geeigneten Kühlsystems reduziert die TIN‑Beschichtung Reibung und thermische Belastung, was den Werkzeugverschleiß deutlich verringert. Vorbohren mit einem Zentrierbohrer wird bei hohen Präzisionsanforderungen empfohlen, und die geschliffene Geometrie verlangt sorgfältigen Umgang, da sie härter, aber weniger duktil ist. Für Handbohrmaschinen ist der Bohrer gut geeignet; bei stationärem Einsatz erhöhen stabile Spannmittel und Kühlung die Lebensdauer zusätzlich. Empfehlung: Für anspruchsvolle Metallbohrungen die Qualität von MetavCUT nutzen und auf die kurze Ausführung mit TIN‑Beschichtung setzen; bei Fragen zur Anwendung oder Auswahl steht METAV Werkzeuge mit kompetenter Beratung zur Verfügung – E‑Mail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930, WhatsApp: +49 170 2837271 Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 46055-FDA Durchmesser: 5,5 mm Spitzenwinkel: 135° Typ: Typ N Ausführung: kurz Schaft Ausführung: geschliffen Material: HSS-G Spirallänge: 57 mm Gesamtlänge: 93 mm Farbe/Oberfläche: TIN-beschichtet Norm: DIN 338 Modellserie: Standard Line Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie gut eignet sich der Spiralbohrer von MetavCUT für Edelstahl? Der Spiralbohrer von MetavCUT (Kurzspiralbohrer, Typ N) mit 135° Spitzenwinkel ist für härtere Werkstoffe besser geeignet als Bohrer mit flacherem Winkel; bei Edelstahl empfiehlt sich zudem Kühlung und angepasste Schnittgeschwindigkeit, um eine lange Standzeit zu gewährleisten. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für Handbohrmaschinen freigegeben und zeichnet sich durch die kurze Ausführung aus, wodurch Stabilität und Rundlauf auch bei handgeführten Anwendungen verbessert werden. Was bedeutet geschliffen bei diesem Spiralbohrer und welche Vorteile bringt das? Geschliffen bedeutet, dass die Spannuten und Geometrie präzise per Schleifprozess hergestellt wurden; der Spiralbohrer von MetavCUT bietet dadurch sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Metall erlaubt, allerdings sollte die Anwendung mit Bedacht erfolgen, da geschliffene Bohrer spröder sein können. Welche Materialien kann der Spiralbohrer von MetavCUT mit TIN‑Beschichtung bearbeiten? Der Spiralbohrer von MetavCUT mit TIN‑Beschichtung eignet sich zum Bohren in legierten und unlegierten Stählen, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetallen wie Kupfer, Bronze und Neusilber sowie in Hartkunststoffen; bei zähen Werkstoffen ist geeignete Kühlung und Maschinenstabilität wichtig. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#46055-FDA","sku":"46055-FDA","mpn":"46055-FDA","name":"Spiralbohrer 46055-FDA","description":"Kurzspiralbohrer 5,5 mm, 135°, Typ N, TIN-beschichtet, HSS-G, DIN 338; geschliffener Zylinderschaft für präzise Metallbohrungen in legierten und unlegierten Stählen sowie Nichteisenmetallen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe/Oberfläche","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"57 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"93 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie gut eignet sich der Spiralbohrer 46055-FDA von MetavCUT für Edelstahl?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 46055-FDA von MetavCUT (Kurzspiralbohrer, Typ N) mit 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl besonders geeignet; empfohlen werden angepasste Schnittgeschwindigkeit und Kühlung, um Standzeit und Schneidkante zu schonen."}},{"@type":"Question","name":"Kann der Spiralbohrer 46055-FDA von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 46055-FDA von MetavCUT ist für Handbohrmaschinen geeignet; die kurze Ausführung verbessert Stabilität und Rundlauf bei handgeführten Anwendungen."}},{"@type":"Question","name":"Was bedeutet geschliffen bei dem Spiralbohrer 46055-FDA und welche Vorteile bringt das?","acceptedAnswer":{"@type":"Answer","text":"Geschliffen bedeutet, dass Spannuten und Geometrie präzise per Schleifprozess gefertigt wurden; der Spiralbohrer 46055-FDA bietet dadurch sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Metall ermöglicht. Nachteilig kann erhöhte Sprödigkeit sein, daher ist vorsichtige Anwendung und Kühlung sinnvoll."}},{"@type":"Question","name":"Welche Materialien kann der Spiralbohrer 46055-FDA von MetavCUT mit TIN‑Beschichtung bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 46055-FDA von MetavCUT mit TIN‑Beschichtung eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber sowie für Hartkunststoffe; bei zähen Werkstoffen ist geeignete Kühlung und Maschinenstabilität wichtig."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/46055-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"Bohrer für Metallbearbeitung"},{"@type":"Thing","name":"Geschliffener HSS-G mit TIN-Beschichtung"}],"mentions":[{"@type":"Thing","name":"Geeignet für Handbohrmaschine"},{"@type":"Thing","name":"Empfohlen: Kühlung zur Standzeitsteigerung"},{"@type":"Thing","name":"Anwendung: legierte und unlegierte Stähle"}]}]}

Spiralbohrer (HSS‑G) – 5,5 mm, 135°, lang, blank, DIN 340 Der Spiralbohrer ist ein langer HSS‑G‑Bohrer für präzise Metallbohrungen und tiefe Zugänge, ideal für Werkstatt, Montage und Maschinenbau. Langer HSS‑G Bohrer nach DIN 340 für tiefe Löcher 5,5 mm Durchmesser mit 139 mm Gesamtlänge Geschliffene Ausführung für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für härtere Werkstoffe Geeignet für legierten und unlegierten Stahl Hohe Standzeit und schnelle Schnittleistung dank HSS‑G Die geschliffene HSS‑G‑Geometrie sorgt für sehr scharfe Schneiden und einen exzellenten Rundlauf. Dadurch werden Bohrungen in Stahl und Guss schnell und präzise ausgeführt; die geschliffene Ausführung ermöglicht eine bis zu 40 % schnellere Bearbeitung und benötigt deutlich weniger Anpresskraft als konventionelle Ausführungen. Für Anwender bedeutet das weniger Nacharbeit und gleichbleibende Bohrqualität bei Serien‑ und Einzelteilen. Vielseitiger Einsatzbereich mit gezieltem Materialfokus Dieses lange HSS‑G‑Werkzeug ist speziell ausgelegt für das Bohren in legierten und unlegierten Stahlarten sowie in Guss‑ und Sinterwerkstoffen. Der 135° Spitzenwinkel reduziert das Anlaufen auf harten Materialien und erleichtert das Eintauchen in schwierige Werkstoffe wie Edelstahl. Anwender profitieren von sauberen, formtreuen Bohrlöchern und minimiertem Wandern auf der Oberfläche. Mehr Reichweite durch lange Ausführung nach DIN 340 Die längere Ausführung (DIN 340) mit einer Gesamtlänge von 139 mm und einer Spirallänge von 91 mm ermöglicht das Bohren tiefer Löcher und den Zugang zu schwer erreichbaren Stellen. Die längere Spirale transportiert Späne effizienter aus tieferen Bohrungen heraus; das ist besonders vorteilhaft bei gebohrten Buchsen oder innenliegenden Bohrstellen. Die geschliffene Schaftausführung unterstützt stabilen Rundlauf in handelsüblichen Futterspannsystemen. Zielgruppe, Anwendungstipps und Produktempfehlung Entwickelt für Handwerk, Industrie und ambitionierte Heimwerker, empfiehlt sich der Einsatz des Bohrers in stationären Säulenmaschinen ebenso wie in leistungsfähigen Handbohrmaschinen. Für hochpräzise Bohrungen vorzentrieren und Kühlschmierstoff einsetzen, um die Standzeit zu verlängern. Bei tieferen Bohrungen empfiehlt sich stufenweises Vorschreiten und regelmäßiges Entfernen der Späne für saubere Bohrbilder. Empfehlung: Der MetavCUT HSS‑G Spiralbohrer ist die erste Wahl für präzise Tiefbohrungen in Stahl und Guss; bei technischen Fragen oder Auswahlhilfe steht Ihnen METAV Werkzeuge gerne persönlich zur Verfügung – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930, WhatsApp: +49 170 2837271 Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 53055-FDA Durchmesser: 5,5 mm Spitzenwinkel: 135° Ausführung: lang (DIN 340) Farbe: blank Material: HSS‑G Schaft Ausführung: geschliffen Gesamtlänge: 139 mm Spirallänge: 91 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer als HSS‑G‑Bohrer ist mit dem 135° Spitzenwinkel für härtere Werkstoffe geeignet; bei Edelstahl empfiehlt sich die Verwendung von Kühlschmierstoff und moderater Schnittgeschwindigkeit, um Überhitzung und vorzeitigen Verschleiß zu vermeiden. Kann der Spiralbohrer mit einer Handbohrmaschine verwendet werden? Der MetavCUT Spiralbohrer wurde für den Einsatz in Handbohrmaschinen freigegeben, eignet sich jedoch besonders für stationäre Anwendungen bei höchsten Anforderungen an Rundlauf und Präzision; für Handbetrieb sind eine feste Spannaufnahme und kontrollierter Vorschub wichtig. Was bedeutet die lange Ausführung nach DIN 340 und wofür ist sie gut? Die lange Ausführung (DIN 340) des MetavCUT Spiralbohrers bietet eine größere Gesamtlänge und Spirallänge, wodurch tiefe Bohrungen und schwer zugängliche Stellen erreichbar werden; dabei verbessert die längere Spirale die Spanabfuhr bei tiefen Bohrungen. Wie verlängert man die Lebensdauer des Spiralbohrers? Für eine längere Standzeit des MetavCUT HSS‑G Spiralbohrers empfehlen sich Kühlschmierstoffe, angepasste Schnittgeschwindigkeit, Vorzentrieren bei hoher Präzision und das Vermeiden seitlicher Belastung während des Bohrens. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#53055-FDA","sku":"53055-FDA","mpn":"53055-FDA","gtin13":"","name":"Spiralbohrer 53055-FDA","description":"Langer HSS-G Spiralbohrer 5,5 mm, 135° Spitzenwinkel, geschliffen, blank, DIN 340, Gesamtlänge 139 mm, Spirallänge 91 mm; geeignet für legierte und unlegierte Stähle, Guss- und Sinterwerkstoffe; ideal für tiefe Bohrungen und schwer zugängliche Stellen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"lang (DIN 340)"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"139 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"91 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 5,5 mm (HSS-G, 135° Spitzenwinkel) ist für härtere Werkstoffe wie Edelstahl geeignet; empfohlen werden Kühlschmierstoffe und moderate Schnittgeschwindigkeit, um Überhitzung und vorzeitigen Verschleiß zu vermeiden."}},{"@type":"Question","name":"Kann der Spiralbohrer mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 5,5 mm kann mit einer Handbohrmaschine eingesetzt werden; bei Handbetrieb sind feste Spannaufnahme und kontrollierter Vorschub wichtig, optimaler Rundlauf wird jedoch in stationären Säulenmaschinen erreicht."}},{"@type":"Question","name":"Was bedeutet die lange Ausführung nach DIN 340 und wofür ist sie gut?","acceptedAnswer":{"@type":"Answer","text":"Die lange Ausführung nach DIN 340 bedeutet größere Gesamtlänge und längere Spirallänge (hier 139 mm Gesamtlänge, 91 mm Spirallänge) und ermöglicht das Bohren tiefer Löcher sowie das Erreichen schwer zugänglicher Stellen; die längere Spirale verbessert die Spanabfuhr."}},{"@type":"Question","name":"Wie verlängert man die Lebensdauer des Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Für längere Standzeit des MetavCUT Spiralbohrers 5,5 mm empfehlen sich Kühlschmierstoffe, angepasste Schnittgeschwindigkeit, Vorzentrieren bei hoher Präzision und das Vermeiden seitlicher Belastung während des Bohrens."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/53055-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer lange Ausführung DIN 340"},{"@type":"Thing","name":"HSS-G für Metallbohrungen"},{"@type":"Thing","name":"Tiefbohrungen und schwer zugängliche Stellen"}],"mentions":[{"@type":"Thing","name":"Kühlschmierstoff empfohlen"},{"@type":"Thing","name":"Vorzentrieren bei hoher Präzision"},{"@type":"Thing","name":"Geeignet für legierten und unlegierten Stahl"}]}]}

Twist Drill Type N — HSS short, Ø 5.6 mm, 118° tip, black, DIN 338, short execution The Twist Drill Type N is a short HSS metal drill engineered for precision drilling in metal with a 5.6 mm diameter and a 118° tip suitable for drilling machines and hand drills. Short HSS design for increased stability Conforms to DIN 338 for short twist drills 118° tip for improved centring in metal 5.6 mm diameter for standard hole sizes Precision and stable performance for metalworking The Twist Drill from MetavCUT delivers reproducible results when working with metal thanks to its HSS composition and short geometry. The reduced overhang improves Stability and reduces vibration during cutting, which leads to cleaner Holes and less tool deflection. For metalworking applications where accuracy matters, the short design offers higher rigidity than longer drills and helps maintain concentricity even under varying feed conditions. Material and norm advantages for reliable use Manufactured in HSS, this short Type N drill is aligned with DIN 338, which defines short twist drills with cylindrical shank for metalworking. The 118° Tip provides a balance between fast penetration and good centring on slightly softer Metals and general Steel grades. The roll-formed or ground production options described by the norm ensure consistent geometry and simplify resharpening when required, supporting long-term usability and predictable drilling behaviour. Intended applications and who benefits most Designed primarily as a metalworking tool, the Type N geometry suits workshops, maintenance teams and professionals who use drilling machines or hand drills for steel, cast Iron and non-ferrous Metals. Its 5.6 mm diameter makes it appropriate for typical assembly and fabrication tasks where precision holes are required. Users seeking a robust, easy-to-handle drill for repetitive metal drilling will value the combination of short length and HSS material for a lower risk of breakage on small-diameter holes. Handling, sharpening and practical notes The shorter overall length reduces chatter and supports accurate axial guidance; this makes the drill easier to control in portable and stationary machines. When sharpening the point, preserving the 118° geometry maintains the intended cutting behaviour: reduced thrust and improved centring. For the best results, apply suitable cutting fluid and moderate feeds when drilling harder alloys to extend tool life. Regular inspection of the cutting lips will indicate when resharpening is needed to restore performance. We strongly recommend the MetavCUT Twist Drill Type N for precision metalworking — for personalised technical advice or to confirm suitability contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Twist Drill Marke: MetavCUT SKU: 40056-FDA Durchmesser: 5,6 mm Spitzenwinkel: 118° Spirallänge: 57 mm Gesamtlänge: 93 mm Typ: Type N Ausführung: short Farbe: black Material: HSS Norm: DIN 338 Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily used for metalworking tasks; as a short HSS drill it is suitable for drilling in alloyed and unalloyed Steel, Cast Iron and various Non-Ferrous Metals where stability and precision are required. Can the MetavCUT Twist Drill Type N be used in a hand drill? Yes, the MetavCUT Twist Drill Type N is compatible with drilling machines and can be used in many Hand Drill applications, though the short design is particularly advantageous in stationary setups or where minimal overhang is needed. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and larger drill diameters; this shape is relatively easy to resharpen and withstands higher loads during drilling. Which three drill types exist? There are three common drill categories: Metal drill, Wood drill, and Stone/Concrete drill. Why are Twist Drills sharpened? Sharpening reduces the cross-cutting edge at the Tip of the Twist Drill, which lowers friction forces and therefore reduces the required feed force while improving centring in the Workpiece. Can you drill wood with a Twist Drill? A Metal Twist Drill can be used in Wood, but it offers poorer guidance and a less clean finish compared with dedicated Wood drills; however, such drills are simpler to resharpen and exhibit lower self-feeding tendencies. At which drilling depths is the Twist Drill most used? A full through-hole is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The common belief that HSSE steels are categorically superior to standard HSS is not universally true; evaluate whether the specific working conditions justify the higher purchase cost of HSSE before choosing.

Karosseriebohrer – 5,6 mm | 135° Spitzenwinkel | doppelseitig | blank | HSS-G Der Karosseriebohrer ist ein kompakter Doppelendbohrer für Metallbohrungen, ideal für Handbohrmaschine und präzise Arbeiten in Blech und Stahl. Geschliffen für saubere und präzise Bohrlöcher 5,6 mm Durchmesser für Standard-Metallarbeiten 135° Spitzenwinkel für härtere Werkstoffe Doppelseitig einsetzbar wie zwei Bohrer in einem Geschliffener Schaft für hohen Rundlauf und Stabilität Schnellere Ergebnisse durch geschliffene HSS-G-Geometrie Der Einsatz von HSS-G ermöglicht deutlich höhere Schnittgeschwindigkeiten als gewalzte Bohrer. Dank CNC-Schliff sind die Schneiden extrem scharf, wodurch das Bohren bis zu 40 % schneller erfolgt und gleichzeitig 50 % weniger Anpresskraft benötigt wird. Für Anwender bedeutet das geringere Ermüdung bei Handbohrmaschinen und schnellere Arbeitszyklen in der Werkstatt ohne Einbußen bei der Bohrbildqualität. Praktische Vorteile der doppelseitigen Ausführung Durch die doppelseitige Konstruktion entsteht praktisch ein zweites Einsatzende, das bei stumpfer Spitze sofort verfügbar ist. Diese Bauform macht den Einsatz ökonomisch und reduziert Ausfallzeiten, da kein sofortiger Werkzeugwechsel nötig ist. Die kurze, stabile Bauform eignet sich besonders für Niet- und Dünnblecharbeiten und bietet bei kontrollierter Anwendung eine hohe Prozesssicherheit. Anwendungsempfehlung für Metall und Hinweise zur Handhabung Mit einem Durchmesser von 5,6 mm gehört der Bohrer in den Standard-Bereich und ist für dünne bis mittlere Bleche, Profile sowie allgemeine Metallarbeiten empfohlen. Die Spirallänge 16 mm und Gesamtlänge 66 mm unterstützen saubere Spanabfuhr bei flachen bis mittleren Bohrtiefen. Für bessere Ergebnisse bei härteren Werkstoffen empfiehlt sich eine Vorbohrung oder geringere Vorschubgeschwindigkeit sowie Kühlung, um Zähigkeit und Standzeit zu erhalten. Zielgruppe und Einsatzumfeld Dieser Bohrer richtet sich an professionelle Karosserie- und Instandsetzungsbetriebe sowie anspruchsvolle Heimwerker, die Wert auf präzise Bohrbilder und wirtschaftliche Werkzeuge legen. Die Kombination aus geschliffener Schaftgeometrie und robuster HSS-G-Ausführung macht ihn zur geeigneten Wahl für schnelle Reparatur- und Montagearbeiten in Metall. Bestellen Sie den MetavCUT Karosseriebohrer mit 5,6 mm Durchmesser für präzise Metallbohrungen – persönliche Beratung und technische Unterstützung erhalten Sie unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58056-FDA Durchmesser: 5,6 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: doppelseitig (Doppelendbohrer) Farbe: blank Schaft Ausführung: geschliffen Spirallänge: 16 mm Gesamtlänge: 66 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Kann der Karosseriebohrer von MetavCUT auch in Edelstahl eingesetzt werden? Der MetavCUT Karosseriebohrer ist mit einem 135° Spitzenwinkel ausgeführt und eignet sich für härtere Werkstoffe; bei Edelstahl sind langsamere Schnittgeschwindigkeiten und ausreichende Kühlung empfehlenswert, um die Standzeit des HSS-G Werkzeugs zu maximieren. Wie verwende ich den doppelseitigen Karosseriebohrer am besten in einer Handbohrmaschine? Bei der Verwendung des MetavCUT Karosseriebohrers mit einer Handbohrmaschine wird eine stabile Spannaufnahme und moderater Vorschub empfohlen; die geschliffene Geometrie reduziert den Kraftaufwand, trotzdem sollten Sie kontrolliert anbohren und bei Bedarf Kühlschmierstoff einsetzen. Was unterscheidet den MetavCUT Karosseriebohrer von walzgefertigten Bohrern? Der geschliffene MetavCUT Karosseriebohrer (HSS-G) bietet schärfere Schneiden und höhere Rundlaufgenauigkeit als walzgefertigte Bohrer, was sauberere Bohrbilder und oft schnellere Ergebnisse ermöglicht, allerdings erfordert er vorsichtigere Handhabung gegen Bruch. Ist der MetavCUT Karosseriebohrer für tiefe Bohrungen geeignet? Für tiefe Bohrungen wird der Einsatz von längeren Spezialbohrern empfohlen; der MetavCUT Karosseriebohrer mit Spirallänge 16 mm ist primär für flache bis mittlere Bohrtiefen konzipiert und liefert dort die besten Ergebnisse. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – METAV Werkzeuge bietet kompetente Beratung: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58056-FDA","sku":"58056-FDA","mpn":"58056-FDA","name":"Karosseriebohrer 58056-FDA","description":"Karosseriebohrer, 5,6 mm Durchmesser, 135° Spitzenwinkel, doppelseitig, blank, HSS-G; kompakter Doppelendbohrer für Metallbohrungen, geeignet für Handbohrmaschine und präzise Arbeiten in Blech und Stahl; geschliffener Schaft für hohen Rundlauf; Spirallänge 16 mm, Gesamtlänge 66 mm.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,6 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig (Doppelendbohrer)"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"16 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"66 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"}],"offers":{"@type":"Offer","price":"1.79","priceCurrency":"EUR"}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Kann der Karosseriebohrer von MetavCUT auch in Edelstahl eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT ist mit einem 135° Spitzenwinkel ausgeführt und eignet sich für härtere Werkstoffe; bei Edelstahl sind langsamere Schnittgeschwindigkeiten und ausreichende Kühlung empfehlenswert, um die Standzeit des HSS-G Werkzeugs zu maximieren."}},{"@type":"Question","name":"Wie verwende ich den doppelseitigen Karosseriebohrer am besten in einer Handbohrmaschine?","acceptedAnswer":{"@type":"Answer","text":"Bei der Verwendung des MetavCUT Karosseriebohrers in einer Handbohrmaschine empfiehlt sich eine stabile Spannaufnahme und moderater Vorschub; die geschliffene Geometrie reduziert den Kraftaufwand, dennoch kontrolliert anbohren und bei Bedarf Kühlschmierstoff einsetzen."}},{"@type":"Question","name":"Was unterscheidet den MetavCUT Karosseriebohrer von walzgefertigten Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene MetavCUT Karosseriebohrer (HSS-G) bietet schärfere Schneiden und höhere Rundlaufgenauigkeit als walzgefertigte Bohrer, was sauberere Bohrbilder und oft schnellere Ergebnisse ermöglicht, allerdings erfordert er vorsichtigere Handhabung gegen Bruch."}},{"@type":"Question","name":"Ist der MetavCUT Karosseriebohrer für tiefe Bohrungen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Für tiefe Bohrungen werden längere Spezialbohrer empfohlen; der MetavCUT Karosseriebohrer mit Spirallänge 16 mm ist primär für flache bis mittlere Bohrtiefen konzipiert und liefert dort die besten Ergebnisse."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-58056-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Doppelendbohrer für Karosserie und Blech"},{"@type":"Thing","name":"HSS-G geschliffene Geometrie"},{"@type":"Thing","name":"Präzise Bohrbilder für Handbohrmaschinen"}],"mentions":[{"@type":"Thing","name":"Spirallänge 16 mm"},{"@type":"Thing","name":"Gesamtlänge 66 mm"},{"@type":"Thing","name":"Schaft geschliffen"},{"@type":"Thing","name":"135° Spitzenwinkel"}]}]}

Twist Drill — Type N, 5.6 mm, 135° tip, extra short, Bright finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill Type N extra short by MetavCUT is a compact HSS‑G metalworking bit optimised for hand and drilling machines, designed for precise, high‑stability drilling in tougher materials. Extra‑short design for greater stability HSS‑G material for faster metal drilling 135° tip for harder materials like stainless steel Cylindrical shank fits standard three‑jaw chucks Increased performance through HSS‑G construction The HSS‑G material offers improved cutting performance compared with conventional HSS, enabling up to 40% faster drilling while requiring significantly less feed force. This results in reduced operator fatigue and more consistent hole quality when working with alloyed and unalloyed steels, cast materials and non‑ferrous metals. For users who value speed and durability, the hardened high‑speed steel composition is a decisive advantage. Stability and safety from the extra‑short geometry Because the bit is extra short relative to DIN 1897 standards, the reduced overall length and shorter flute length increase rigidity and lower the risk of breakage. This geometry is particularly beneficial when drilling in thin sheets or confined spaces, where a long overhang would cause vibration or chatter. The compact form factor therefore improves centring and repeatability for precision tasks. Tip geometry and shank: better entry and universal clamping A 135° tip angle reduces the tendency to wander on hard surfaces and shortens pilot time when penetrating tougher materials like stainless steel. The cylindrical shank ensures universal compatibility with standard three‑jaw chucks, allowing quick changes in common hand and bench drilling setups. For high‑torque applications, users should verify chuck grip to avoid slippage. Practical applications and user guidance This extra‑short Twist Drill (Type N) is aimed at mechanics, maintenance technicians and metalworkers who need reliable, compact drills for production or repair work. It is particularly suited to drilling in steel, cast iron, sintered iron and hard plastics. For best results, use appropriate cutting fluid on harder alloys and moderate speeds to prolong tool life and ensure cleaner holes. We recommend the MetavCUT extra short HSS‑G Twist Drill for precision metalworking and confined‑space drilling; for personalised technical guidance or application support contact METAV Werkzeuge — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 56056-FDA Diameter: 5.6 mm Total length: 66 mm Spiral length: 28 mm Tip angle: 135° Type: Type N Execution: extra short Colour / Finish: Bright finished Material: HSS‑G Shank design: Cylindrical Standard: DIN 1897 Intended use: Drills for metal / Drilling Machine compatibility (Hand Drilling Machine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill Type N extra short suitable for stainless steel? The MetavCUT Twist Drill Type N extra short is designed with a 135° tip specifically to improve entry into harder materials such as stainless steel; combined with HSS‑G material this makes it well suited for such applications when used with appropriate cutting fluid and speeds. Can the MetavCUT Twist Drill be used in a standard hand drill? Yes, the MetavCUT Twist Drill Type N extra short features a cylindrical shank that fits standard three‑jaw chucks, making it compatible with most hand and bench drilling machines; ensure firm chuck clamping to prevent slippage under higher torque. What are twist drills used for? Twist Drills are primarily used for machining high‑strength materials and larger hole diameters. They are relatively easy to re‑grind and withstand higher loads, which makes them suitable for demanding metalworking tasks. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are twist drills sharpened (pointed)? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction and required feed force while improving centring accuracy in the workpiece. Can a metal twist drill be used for wood? A metal twist drill can be used in wood, but it generally provides poorer guidance and a less clean hole than a dedicated wood bit; however, it is easier to re‑grind and exhibits less self‑feeding. For which drilling depths is the twist drill most commonly used? A full‑bore hole is commonly made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common belief that HSSE steels are inherently superior to HSS is incorrect. When choosing, consider whether the specific working conditions justify the higher purchase price of HSSE.

Twist Drill — Short Type N, 5.6 mm, 135° Tip, HSS‑G, Bright Finished The Twist Drill short Type N is a precision metalworking drill bit for Drilling Machine use, designed for stable, high‑performance drilling in hard and alloyed metals. Short design for higher stability and precision Fully ground shaft for excellent runout accuracy 135° tip angle optimised for hard materials Conforms to DIN 338 for short HSS twist drills Bright finished surface for corrosion resistance and visual inspection Reliable high‑speed performance for demanding metalwork The HSS‑G construction of this short Twist Drill delivers high cutting performance and durability when machining steels, cast iron and non‑ferrous metals. The ground flute geometry produces clean, precise holes and allows up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS variants, making it particularly efficient for production tasks where time and tool life matter. The compact overall length reduces chatter and bending, improving hole quality in tougher materials. Greater stability and centring for exact bores A shorter projection from the chuck gives this short Type N bit superior stability and reduced deflection, which is essential when drilling tight‑tolerance holes. The 135° tip angle lowers the initial entry forces and helps the drill to centre better in hard workpieces such as stainless steel. The typical “normal spiral” Type N geometry is intended for metal applications and balances chip evacuation with cutting action for reliable, repeatable results. Designed for workshop and industrial applications Manufactured to DIN 338, this Twist Drill is intended for use in both stationary and portable Drilling Machines in metalworking shops, tool rooms and maintenance departments. The fully ground shank ensures precise seating in the chuck and minimises runout, while the bright finished surface facilitates visual inspection for wear. This combination makes the bit suitable for professionals who prioritise accuracy and predictable performance. Practical handling, sharpening and limitations As a ground HSS tool, the bit offers very sharp cutting edges and high roundness, enabling neat bores and easier re‑grinding when resharpening is required. For best results and longevity, use appropriate coolant during prolonged cutting in hardened materials and avoid dry, high‑speed drilling without suitable machine stability. Although the Type N Twist Drill can be used in non‑metal materials, it is optimised for metals; for woodworking or masonry, specialised bits remain recommended. Strong recommendation: Choose the MetavCUT short Twist Drill for precision metal drilling and contact METAV Werkzeuge for expert advice — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45056-FDA Type: Typ N (Type N) Diameter: 5.6 mm Tip angle: 135° Material: HSS-G Execution: Short (kurz) Surface/Colour: Bright finished (blank) Shaft finish: Fully ground (geschliffen) Spiral length: 57 mm Overall length: 93 mm For machine: Drilling Machine (Handbohrmaschine) Norm: DIN 338 Model series: Standard Line Application: Drills for metal Designation (English): Twist Drill Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT primarily used? The MetavCUT Twist Drill short Type N is mainly applied to the machining of high‑strength materials and for larger hole diameters; its short projection offers improved stability and precision. The ground geometry is easier to resharpen and withstands higher loads, making it suitable for drilling alloyed and unalloyed steels, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill falls into the metal drill category and is optimised for metalworking tasks.

Twist Drill (Type N) – HSS short, 5.75 mm, 118° tip, black, DIN 338 The Twist Drill Type N is a short HSS drill bit designed for metalworking, offering precise 5.75 mm holes with a 118° tip for reliable centring in handheld and machine drilling applications. Short HSS design for increased stability 5.75 mm diameter for precise metal holes 118° tip for reliable centring on curved surfaces Conforms to DIN 338 for short twist drills Type N spiral optimized for metal drilling Precision and durability for metalworking tasks This Twist Drill is manufactured from HSS (High Speed Steel) to deliver consistent cutting performance in metalworking. The short execution and firm geometry reduce deflection and vibration, which improves hole accuracy and prolongs tool life compared with longer variants. The 5.75 mm nominal diameter and classic Type N spiral make this bit particularly suitable for drilling unalloyed and alloyed steels, cast iron and various non-ferrous metals. The DIN 338 designation confirms the design as a short spiral drill with a cylindrical shank, intended for use in both stationary machines and portable drilling machines. Stability and handling advantages of the short design A reduced overhang from the chuck yields measurable benefits in everyday workshop use: the shorter flute length (57 mm) and overall length (93 mm) improve centring and reduce walking at the start of the hole, while increasing rigidity during plunge. For operations where precision is critical, such as aligning multiple holes or working on small assemblies, the compact geometry of this Type N bit helps achieve repeatable results. The black finish provides visual contrast for quick size identification and handling in busy toolboxes. Suitable applications and target users MetavCUT’s Twist Drill is aimed at professional machinists, maintenance technicians and skilled hobbyists who require dependable performance on metal. It is intended for through-holes and general drilling tasks in metal components, and is suitable for use with handheld drilling machines as well as bench and column drills. Because the bit follows the DIN 338 standard for short drills, it is a practical choice when higher stability and positional accuracy are priorities over deep drilling. How the geometry and point angle affect performance The 118° tip angle is a versatile compromise that eases initial centring and reduces walking on slightly curved or soft surfaces, while maintaining effective cutting for many metal types. Point geometry determines how the bit enters the material: by shaping the tip to the appropriate angle and relief, cutting forces and friction are reduced, which lowers feed requirements and improves centring. Short HSS bits of the Type N family can be resharpened with conventional tools and are robust under standard workshop conditions. Choose MetavCUT’s Twist Drill for precise, stable metal drilling and contact METAV Werkzeuge for tailored technical advice — Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 400575-FDA Diameter: 5.75 mm Tip Angle: 118° Type: Type N Material: HSS (High Speed Steel) Execution: Short Colour: black Spiral Length: 57 mm Overall Length: 93 mm Application: Drills for Metal Standard: DIN 338 Suitable For: Drilling Machine / Hand Drill Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily employed for machining high-strength materials and larger drill diameters; its design is easy to regrind and withstands greater loads, making it suitable for through-holes and demanding metal-drilling tasks. Which three drill types are there? The three main drill types are metal drill bits, wood drill bits and stone/concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for cutting steel and similar materials.

MetavCUT Twist Drill — Type N short, 5.75 mm, 135°, Bright finished, HSS-G, DIN 338 The MetavCUT Twist Drill (Type N, short) is a precision HSS-G drill designed for stable, high-performance metal drilling in handheld and machine setups. Short design for increased stability HSS-G fully ground for sharp holes 135° Point angle for hard metals Suited for Drilling Machine use in metal Conforms to DIN 338 for standard reliability Precision and force: ideal for demanding metal drilling This short Twist Drill combines a 5.75 mm Diameter with a 135° Point Angle to reduce punch-in and improve guidance when working with hard materials. The HSS‑G (Ground High Speed Steel) material produces very sharp cutting edges after CNC grinding, resulting in clean, round holes and excellent concentricity. For operators this means fewer reworks and a consistently high hole quality when drilling steel, cast iron or alloyed metals. Short length for stability and control A shorter overall Length and reduced projection deliver measurable advantages: the reduced overhang lowers the risk of bending and chatter, which improves hole accuracy and tool life. The fully ground Shank ensures precise clamping in the chuck and consistent Runout. As a result, the short Type N design is particularly suited to precision tasks and machine-mounted operations where stiffness and repeatable performance matter. Material suitability and recommended use cases The MetavCUT Twist Drill is optimised for metalworking: suitable for alloyed and unalloyed steel, cast and spheroidal graphite iron, non‑ferrous metals and hard plastics. The 135° tip is chosen for tougher materials because it shortens the initial bite and reduces axial forces. When working with stainless steel or other high‑strength alloys, use appropriate coolant and moderate speeds to preserve sharpness and avoid work hardening. Practical tip and maintenance advice for longer life Because these drills are ground rather than rolled, occasional regrinding is straightforward and restores the original geometry. Regrind to maintain the 135° Point Angle and symmetrical cutting lips to keep hole quality high. For best results in production settings, clamp the workpiece securely, use proper coolant and select feed and speed according to material charts—this reduces wear and prevents premature breakage. For precision metalworking choose the MetavCUT Twist Drill short Type N with HSS‑G grinding — and contact METAV Werkzeuge for tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Twist Drill Brand: MetavCUT SKU: 450575-FDA Diameter: 5.75 mm Spiral Length: 57 mm Overall Length: 93 mm Point Angle: 135° Type: Type N Execution: short Shank Finish: fully ground Surface/Colour: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal Suitable For: Drilling Machine, Hand Drilling where machine stability is provided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N, short, HSS‑G) is primarily used for machining high‑strength materials and larger drill diameters; its ground geometry allows precise drilling in metals and hard plastics while withstanding greater loads. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is engineered for that application. Why is the MetavCUT Twist Drill supplied with a 135° point angle? The 135° Point Angle reduces axial entry force and improves centring in hard materials, which helps decrease Anbohrzeit and delivers a cleaner start hole when drilling stainless steels and other tough alloys. Can the MetavCUT Twist Drill be used for drilling wood? The MetavCUT Twist Drill can be used in wood, but it offers less guidance and a rougher finish compared with specialised wood bits; it is easier to resharpen and shows lower self‑feed characteristics than dedicated wood drills. If you are unsure whether this tool fits your requirements or need additional technical data, METAV Werkzeuge offers comprehensive consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271

Spiralbohrer Typ N, HSS, 5,7 mm, kurz, schwarz, DIN 338 Der Spiralbohrer von MetavCUT ist ein kurzer HSS-Bohrer für präzise Metallbohrungen und eignet sich für Handbohrmaschine und stationäre Maschinen. Metallbohrer aus HSS für hohe Schnittfestigkeit DIN 338: kurze Spiralbohrer mit Zylinderschaft Spitzenwinkel 118° für leichtes Anbohren Typ N Normalspirale, ideal für Stahl und Eisen Kurze Ausführung reduziert Vibrationen und Bruchrisiko Kurze Ausführung erhöht Stabilität und Präzision beim Bohren in Metall Die kurze Ausführung dieses Bohrers sorgt für eine reduzierte Auskraglänge und damit für deutlich geringere Vibrationen. Das Ergebnis ist eine höhere Bohrungsgenauigkeit und weniger Werkzeugbruch bei Arbeiten in Stahl und Gusseisen. Für Anwender bedeutet das: sauberere Bohrlöcher und längere Standzeiten des Werkzeugs bei gleichen Maschinenparametern. HSS-Material bietet Elastizität und Verschleißfestigkeit Dank HSS (Schnellarbeitsstahl) ist der Bohrer elastisch und verschleißfest, was besonders bei Standardaufgaben in legierten und unlegierten Stählen von Vorteil ist. Die rollgewalzte Fertigung vermindert das Bruchrisiko bei kleinen Durchmessern und sorgt für konstante Schärfe. Für die Praxis heißt das: zuverlässige Schnittleistung und weniger Nachschleifen. Normkonforme Bauweise nach DIN 338 und passende Geometrie Die Konstruktion nach DIN 338 klassifiziert den Bohrer als kurzen Spiralbohrer mit Zylinderschaft und stellt kompatible Maße und Toleranzen sicher. Die Spitzenwinkelgeometrie von 118° ist auf allgemeine Metallbearbeitung ausgelegt und erleichtert das Anbohren auf ebenen und leicht gewölbten Oberflächen. Anwender im Standardbereich (2,0–13,0 mm) profitieren besonders von der Kombination aus Normtreue und universeller Schneidenform. Typ N Normalspirale und Anwendungsbereich für Handwerke und Werkstatt Als Typ N Normalspirale erfüllt der Bohrer die Anforderungen für das Bohren in Stahl, Eisen und vielen Nichteisenmetallen. Aufgrund des Durchmessers von 5,7 mm ist er ideal für Werkstatt, Montage und DIY-Projekte mit Handbohrmaschine geeignet. Die kompakte Bauart erlaubt schnelle Wechsel und stabile Bearbeitung auch in beengten Bereichen. Empfehlungen zur praktischen Anwendung und Pflege Für saubere Ergebnisse empfiehlt sich vor dem Bohren das Anpunkten mit einem Zentrierbohrer, wenn höchste Präzision gefordert ist. Kühlschmierstoff verlängert die Lebensdauer bei harten Werkstoffen. Die Verwendung in leistungsfähigen, sauber geführten Bohrmaschinen minimiert Auschläge und erhöht die Bohrungsqualität. Mit dem HSS-Kurzbohrer von MetavCUT präzise Metallbohrungen zuverlässig durchführen und bei Fragen unsere Fachberatung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Technische Informationen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40057-FDA Durchmesser: 5,7 mm Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Farbe: schwarz Spitzenwinkel: 118° Gesamtlänge: 93 mm Spirallänge: 57 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer von MetavCUT für Stahlbohrungen? Der Spiralbohrer von MetavCUT aus HSS und Typ N ist speziell für Stahl und Eisen ausgelegt; die Materialwahl und die 118° Spitzengeometrie sorgen für kontrolliertes Eindringen und stabile Spanbildung bei typischen Werkstattgeschwindigkeiten. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer von MetavCUT in kurzer Ausführung ist für die Nutzung mit Handbohrmaschine geeignet und bietet aufgrund der reduzierten Auskraglänge verbesserte Stabilität gegenüber langen Ausführungen. Welche Vorteile bietet HSS beim Spiralbohrer von MetavCUT? HSS beim Spiralbohrer von MetavCUT liefert Elastizität und Verschleißfestigkeit; die rollgewalzte Herstellung verringert das Bruchrisiko und sorgt für längere Standzeiten im Routineeinsatz. Welche Bedeutung hat die Norm DIN 338 für den Spiralbohrer von MetavCUT? Die Norm DIN 338 garantiert, dass der Spiralbohrer von MetavCUT den standardisierten Maßen und Toleranzen für kurze Spiralbohrer mit Zylinderschaft entspricht und somit kompatibel mit gängigen Spannfuttern und Vorrichtungen ist. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40057-FDA","sku":"40057-FDA","mpn":"40057-FDA","name":"Spiralbohrer 40057-FDA","description":"Spiralbohrer Typ N, HSS, Durchmesser 5,7 mm, kurz, schwarz, DIN 338. Kurz ausgeführter HSS-Kurzbohrer für präzise Metallbohrungen in Stahl, Eisen und Nichteisenmetallen; reduziert Vibrationen und erhöht Standzeit.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,7 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS (Schnellarbeitsstahl)"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"93 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"57 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie eignet sich der Spiralbohrer von MetavCUT für Stahlbohrungen?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT ist ein HSS‑Bohrer Typ N mit 118° Spitzenwinkel und eignet sich hervorragend für Stahl und Eisen; die Materialwahl und Geometrie sorgen für kontrolliertes Eindringen und stabile Spanbildung."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurze Spiralbohrer von MetavCUT mit Zylinderschaft ist für Handbohrmaschine geeignet und bietet durch die kurze Ausführung erhöhte Stabilität gegenüber langen Bohrern."}},{"@type":"Question","name":"Welche Vorteile bietet HSS beim Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"HSS (Schnellarbeitsstahl) verleiht dem Spiralbohrer von MetavCUT Elastizität und Verschleißfestigkeit; die rollgewalzte Fertigung verringert das Bruchrisiko und sorgt für konstante Schärfe."}},{"@type":"Question","name":"Welche Bedeutung hat die Norm DIN 338 für den Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die Norm DIN 338 klassifiziert den kurzen Spiralbohrer mit Zylinderschaft und stellt sicher, dass Maße und Toleranzen kompatibel mit gängigen Spannfuttern und Vorrichtungen sind."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40057-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer kurz"},{"@type":"Thing","name":"HSS Bohrer für Metall"},{"@type":"Thing","name":"DIN 338 Klassifikation"}],"mentions":[{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Spitzenwinkel 118°"},{"@type":"Thing","name":"Kurze Ausführung für erhöhte Stabilität"}]}]}

Twist Drill Type N — short, 5.7 mm, 135°, 5% cobalt-alloyed, HSS‑E, DIN 338, fully ground (MetavCUT Standard Line) The Twist Drill Type N short is a precision drill for metal, designed for Drilling Machine use and optimised for stable, accurate holes in hard materials. Short design for higher stability 5.7 mm diameter for standard metal holes 135° tip angle for hard materials HSS‑E with 5% cobalt alloy for toughness Fully ground shaft for precise bore quality Precision and material strength for demanding metalwork This paragraph explains why the Twist Drill Type N from MetavCUT suits hard-material applications: the combination of HSS‑E and 5% cobalt-alloyed composition increases heat resistance and Wear Resistance during high-speed drilling. Because the tool is made in a short execution, the Reduced Overhang improves rigidity and lowers the risk of bending, which yields cleaner bores and longer tool life. For users who require repeatable accuracy, these material choices translate directly into fewer rejects and less rework. Stability and cutting geometry that ease machining in steel Designed with a 135° tip angle and the classic Type N spiral geometry, this drill penetrates hard steels and alloys more effectively than steeper-point designs. The fully ground flute geometry (HSS‑G) produces sharp cutting edges and high Runout Accuracy, giving a better surface finish in the workpiece. Operators will benefit from reduced vibration and steadier feed, which is especially relevant when machining stainless steel or alloyed materials that demand longer tool life. When to choose a short twist drill and typical applications A short Twist Drill is recommended for operations where Precision and Stability matter: jig work, toolroom tasks and metal fabrication on handheld or bench Drilling Machines. Because of the reduced cantilever, the tool is particularly suited to drilling in rigid setups and hard materials; it is less appropriate where deep through-holes are required. If the task involves smaller hole diameters under high cutting speeds, the short design lowers breakage risk and supports reliable repeatability. Who benefits from this tool and what to expect in use Engineers, maintenance technicians and metalworkers who prioritise Hole Quality and tool durability will find the MetavCUT Standard Line short Twist Drill a pragmatic choice. Expect consistent centring thanks to the tip geometry, straightforward regrinding when needed, and compatibility with a range of ferrous and non‑ferrous metals. Use appropriate cooling and correct spindle speeds to exploit the HSS‑E alloy’s advantages and avoid premature wear. Strongly recommended: Choose the MetavCUT Standard Line Twist Drill for precision metalworking and consult METAV Werkzeuge for tailored advice — eMail: info@metav-werkzeuge.com / Phone: +49 2822 7131930 / WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill (Short) Marke: MetavCUT SKU: 47057-FDA Diameter: 5.7 mm Tip angle: 135° Type: Type N Material: HSS‑E (High Speed Steel, cobalt alloy) Cobalt content: 5% cobalt-alloyed Execution: short Spiral length: 57 mm Overall length: 93 mm Shaft finish: fully ground Suitable for: Drilling Machine / Drills for metal Standard: DIN 338 Model series: Standard Line Application: Bohrer für Metall (Drills for metal) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N from MetavCUT used for? The Twist Drill Type N by MetavCUT is primarily applied to machining high-strength materials and larger drill diameters; its short design and robust alloy make it suitable for precise metalworking where stability is required. This form is easy to regrind and withstands higher loads. Which three drill types exist? Commonly, drill types are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for ferrous and non‑ferrous metals. Why are Twist Drills tip-ground? Tip-grinding reduces the chisel edge at the point of the Twist Drill, significantly lowering friction so less feed force is needed and the tip centres more reliably in the workpiece. Can a Metal Drill be used in wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance is poorer and hole finish may be less clean; metal drills are easier to regrind and show less self-feeding compared with dedicated wood drills.

Karosseriebohrer (Body Drill) — 5.7 mm, 135° tip, double-sided, bright finished, HSS‑G The Karosseriebohrer (Body Drill) is a double-sided Twist Drill designed for precise drilling in metal with a 135° tip angle and a bright finished surface for reliable chip evacuation and visibility. Double-ended design for doubled tool life Fully ground HSS‑G for fast, clean metal drilling 135° tip for improved entry in hard materials Bright finished surface for corrosion resistance and visibility Suitable for Hand Drills and Drilling Machines Faster, cleaner holes in demanding metal work Engineered as a double-sided Twist Drill, this Body Drill delivers efficient performance when working with alloyed and unalloyed steels. The HSS‑G (ground High Speed Steel) geometry produces sharp cutting edges and excellent run-out accuracy, so the tool creates clean, concentric holes with reduced burr formation. For users who process tough materials, the 135° Tip reduces walking and shortens the initial penetration time, which makes setup and pilot drilling faster and more predictable. Robust design that extends usability in workshop routines The double-ended execution means the drill effectively provides two cutting ends in one compact shank, offering a practical redundancy: if one tip becomes dull, simply reverse the tool to use the second cutting end. The fully ground shank and CNC-style flute grinding result in consistent chip removal and less heat build-up during intermittent drilling. As a result, operators benefit from longer effective tooling life and fewer tool changes during production runs. Tailored for metalworking and bodyshop applications This Body Drill is intended primarily for drilling in metal—especially in thin sheet and bodywork contexts—where short, stable drills are preferred. The bright finished surface supports visibility and helps with corrosion resistance in workshop environments. When paired with appropriate cutting fluid and steady feed, the Twist Drill performs reliably in materials such as steel, cast components, non-ferrous metals and certain engineering plastics, making it a versatile choice for metal fabrication and repair tasks. Who benefits most from this tool Mechanics, metal fabricators and maintenance technicians who require precise, repeatable holes in sheet metal and structural components will appreciate the combination of double-sided functionality and the HSS‑G cutting geometry. The Body Drill is also suitable for users of portable Hand Drills as well as stationary Drilling Machines, offering flexibility across workshop setups without sacrificing hole quality. For application advice or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 Strong recommendation:_ Choose the MetavCUT Body Drill for demanding metalwork where precision and uptime matter most — METAV Werkzeuge offers professional advice and support via email, phone and WhatsApp for fitting the right drill to your workflow Designation: Karosseriebohrer (Body Drill) Marke: MetavCUT SKU: 58057-FDA Diameter: 5.7 mm Tip Angle: 135° Spiral Length: 16 mm Overall Length: 66 mm Execution: double-sided Shaft Finish: fully ground Material: HSS-G Colour / Surface: bright finished Intended For: Drilling Machine / Hand Drill Model Series: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Karosseriebohrer from MetavCUT suitable for? The MetavCUT Karosseriebohrer (Body Drill) is optimized for metalworking; its HSS‑G ground geometry is suitable for alloyed and unalloyed steels, cast components, non-ferrous metals and certain hard plastics, delivering clean holes when used with correct speeds and cooling. How does the double-sided design affect tool life and workflow? With the MetavCUT Karosseriebohrer double‑sided Twist Drill, each end functions as an independent cutting tip, so reversing the drill provides immediate reuse of the second edge, reducing downtime for tool changes and extending overall service life under similar wear conditions. For what is a Twist Drill used? A Twist Drill is primarily used for machining high‑strength materials and large drill diameters; its form allows relatively easy sharpening and it withstands higher loads, making it well suited for tasks such as holes for rivets and thin‑sheet metal work. Which three drill types exist? The main categories are Metal drills, Wood drills, and Stone / Concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross edge at the drill tip, which lowers friction and required feed forces; that sharpening also improves centring of the tip in the workpiece for more accurate starts. Can you drill wood with a Twist Drill? A Metal Twist Drill can be used in wood, but guidance and finish are inferior compared with wood‑specific bits; the metal drill is easier to resharpen and shows less aggressive self‑feeding. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is frequently made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are categorically superior to HSS is incorrect; selection should consider working conditions to determine whether the higher cost of HSSE is justified for the specific application.

Twist Drill — Type N, Ø 5.7 mm, 135°, HSS‑G, extra short, bright finished, DIN 1897 The Twist Drill Type N is an extra short HSS‑G metal drill for Drilling Machines, designed for stable, fast and precise holes in a wide range of ferrous and non‑ferrous materials. Extra short design for improved stability HSS‑G material for demanding metal work 135° tip angle for harder workpieces Cylindrical shank for standard chucks Conforms to DIN 1897 for consistent geometry High performance for metalworking tasks With a HSS‑G cutting body and a 135° tip angle, this extra short drill bit delivers reliable penetration into harder materials such as alloyed and unalloyed steel, cast steel and non‑ferrous metals. The ground geometry reduces required feed force by up to 50% and can enable up to 40% faster drilling compared with conventional HSS bits, which translates into measurable productivity gains in workshop and maintenance environments. This makes the bit particularly suitable where robust, reproducible results are required under manual or machine operation. Compact geometry reduces breakage and improves control Designed to the DIN 1897 extra short specification, the reduced overall length provides greater torsional stiffness and lower bending, reducing the risk of fracture during handheld or confined‑space work. The shortened flute and working length improve guidance when drilling thin sheets, profiles or close‑to‑edge holes, allowing cleaner starts and fewer chattering issues. For technicians facing limited access or when a stable, controllable cut is critical, the compact form significantly enhances handling and safety. Universal mounting and consistent centring Equipped with a cylindrical shank, the drill seats securely in standard three‑jaw chucks, offering universal compatibility with common Drilling Machines and hand drills. The Type N normal spiral ensures efficient chip evacuation and a balanced cut for metal applications, while the grind and tip geometry aid centring without aggressive self‑feeding. This combination supports consistent hole quality across repeated operations and simplifies tool selection for general metal fabrication and repair tasks. Intended users and practical advantages Metalworkers, maintenance technicians and engineering workshops will value the durability and serviceability of this extra short bit. It is engineered for frequent resharpening and lower consumable turnover, which contributes to less tool waste and longer operational life. The robust design suits both professional industrial use and demanding hobbyist projects, combining precise holemaking with the convenience of a universally fitting shank and well defined cutting angles. Strong recommendation: For demanding metal drilling, choose the MetavCUT Twist Drill Type N with extra short geometry for improved stability and controlled cutting — METAV Werkzeuge offers expert technical advice and support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Specifications for reliable selection Designation: Twist Drill Marke: MetavCUT SKU: 56057-FDA Diameter: 5.7 mm Tip angle: 135° Type: Type N Execution: extra short Colour: bright finished Material: HSS‑G Standard: DIN 1897 Overall length: 66 mm Spiral length: 28 mm Shank: Cylindrical Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is designed primarily for metalwork and is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics; its HSS‑G composition and 135° tip assist in penetrating tougher workpieces with less feed force. How does the extra short design of the Twist Drill benefit workshop tasks? An extra short Twist Drill from MetavCUT reduces bending and torsional strain compared with standard lengths, improving stability and lowering the chance of breakage; this geometry is particularly advantageous when drilling thin materials or working in confined spaces where control and guidance are essential. For what is a Twist Drill mainly used? It is mainly applied when machining high‑strength materials and larger drill diameters; the shape is easy to regrind and withstands greater loads. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the web thickness at the tip, markedly lowering friction and thus required feed forces while improving centring of the drill in the workpiece. Can a metal drill be used for wood? A metal drill can be used in wood but typically provides poorer guidance and a less clean hole; however, it is easier to resharpen and exhibits reduced self‑feeding compared with specialised wood drills.

Twist Drill — Short HSS-G Twist Drill (Diameter 5.7 mm, 135° tip, Type N, Bright finished, Short, DIN 338) The Twist Drill Type N for Drilling Machine is a short, fully ground HSS-G tool designed for precise metalworking and reliable performance in hard materials. Short design for higher stability Fully ground shank for precise centring 135° tip suited to hardened and stainless steels HSS-G construction for sharp edges and clean holes Conforms to DIN 338 for short metal Twist Drills Durable HSS‑G Construction for cleaner, faster holes Built from HSS‑G, this short Twist Drill delivers sharp cutting edges and high roundness for consistently clean holes in metal. The ground geometry produces fine cutting edges that reduce burr formation and improve hole quality. As a consequence of the grinding quality, this variant drills up to 40% faster and requires about 50% less feed force compared with conventional HSS tools, which is particularly beneficial when working with alloyed or unalloyed steel, cast iron and hard plastics. Short geometry that enhances precision and reduces vibration A shorter overall length and reduced cantilever create noticeably improved stability during machining, which lowers the tendency to wander or bend. The short design makes this Twist Drill especially suitable for accurate operations on stationary or light-duty machines where rigidity matters. Manufactured to DIN 338, the tool’s dimensions and tolerances align with industry expectations for short cylindrical‑shank metal Twist Drills, ensuring predictable performance in professional environments. Optimised tip and fully ground shank for reliable centring With a 135° tip angle, this Twist Drill is prepared for harder materials and reduces initial skidding on tough surfaces. The CNC grinding of the flutes and point results in precise point geometry and excellent runout accuracy, improving hole placement. The fully ground shank supports secure clamping and accurate centring in chucks, which in turn increases tool life when appropriate coolant and speeds are applied. Designed for demanding metalworking tasks and workshops Engineered as a classic Type N metal Twist Drill, this short HSS‑G model addresses the needs of professionals who require repeatable, high‑quality bore results in metals and hard plastics. The bright finished surface aids chip evacuation and inspection, while the robust construction tolerates higher cutting pressures when used with correct feeds and lubrication. For workshops that prioritise precision, the combination of short length and ground geometry offers a reliable balance between rigidity and cutting performance. For demanding metalworking tasks choose the MetavCUT Twist Drill Type N for proven HSS‑G performance — for personalised technical advice or additional specifications contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271. Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 45057-FDA Diameter: 5.7 mm Tip angle: 135° Type: Type N Execution: Short Colour: Bright finished Spiral length: 57 mm Overall length: 93 mm Shank finish: Fully ground Material: HSS-G Norm: DIN 338 Application: Drills for metal Model series: Standard Line Suitable for: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill from MetavCUT, Type N? The MetavCUT Twist Drill Type N is primarily employed for machining high‑strength materials and larger bore diameters; its design is easy to re‑grind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? For general guidance, the main categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N falls into the Metal drills category for use on metals and related materials. Why are Twist Drills with a ground point sharpened (ausgespitzt)? The sharpening reduces the cross‑cut at the tip, which substantially lowers friction and therefore requires less feed force; the improved tip also helps the MetavCUT Twist Drill Type N to centre more reliably in the workpiece. Can the MetavCUT Twist Drill Type N be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; the metal drill is easier to re‑sharpen and has a lower self‑feeding tendency. For which drilling depths is the Twist Drill the most used tool? A solid bore is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill (including models like the MetavCUT Type N) is the most commonly used tool. Is HSS better than HSSE? The common belief that HSSE steels are automatically superior to HSS is inaccurate; selection between HSS and HSSE should consider specific work conditions and whether the higher purchase cost of HSSE is justified for the task at hand.

MetavCUT Twist Drill — Type N, short HSS, 5.8 mm, 118°, black, DIN 338 A MetavCUT Twist Drill Type N for precise metalworking with hand and drilling machines. Short design for enhanced stability HSS material for reliable metal drilling DIN 338 standard for short twist drills 118° point angle for easier centring Precision 5.8 mm diameter for accurate holes Stable, precise metal drilling for demanding tasks The HSS construction of this short Twist Drill ensures high hardness and good toughness for machining a wide range of metals. Thanks to the reduced free length, the short design minimises runout and bending, which improves stability during drilling and reduces the risk of breakage on small diameters. This makes the tool particularly suited to workshop use where repeatable, accurate holes are required. Engineered geometry for faster centring and cleaner holes A 118° point angle provides easier centring and controlled cutting when working on softer and medium-hard materials; the geometry reduces wandering on curved surfaces and speeds initial penetration. The 5.8 mm diameter combined with a spiral length of 57 mm and overall length 93 mm delivers a compact tool that is easy to position in a chuck or hand drill. The Type N normal spiral is optimised for metal, offering good chip evacuation and long tool life in standard drilling applications. Designed for professionals and hobbyists, with expert support This Twist Drill is aimed at machinists, maintenance technicians and hobbyists who need a robust metal-drilling solution in portable or bench drilling machines. Manufactured by MetavCUT, it follows DIN 338 for short twist drills and is ideal when rigidity and precision are priorities. If uncertain whether this drill matches a specific application, METAV Werkzeuge provides comprehensive, competent advice to help select the right tool and parameters. Strong recommendation: Choose the MetavCUT Twist Drill Type N for reliable, precise metal drilling and contact METAV Werkzeuge for personalised technical support — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40058-FDA Type: Type N Diameter: 5.8 mm Point angle: 118° Material: HSS Execution: short Colour: black Spiral length: 57 mm Overall length: 93 mm For: Drilling Machine / Hand Drills Application: Drills for metal Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is designed for machining high-strength and common engineering steels as well as non-ferrous metals. Its short HSS design offers increased stability and makes it suitable for demanding drilling tasks and larger diameters, while remaining easy to regrind when needed. Which three drill types exist? The main drill types are Metal drills, Wood drills, and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for those materials, offering geometry and material choices suited to metalworking.

Twist Drill — Type N short HSS‑E 5.8 mm, 135°, 5% cobalt‑alloyed, fully ground, DIN 338 (MetavCUT) A Twist Drill Type N crafted for precise metal drilling with a short overall length for improved stability and performance. Short design for higher stability and precision 5% cobalt‑alloyed HSS‑E for increased heat resistance Fully ground shank for superior concentricity 135° tip angle for hard material penetration Conforms to DIN 338 for standardised quality Precision and strength for demanding metalwork The HSS‑E composition combined with a 5% cobalt‑alloyed matrix provides enhanced red hardness and wear resistance, making this short twist drill particularly suited for drilling stainless steel and other hard Alloys. The 135° tip angle reduces chipping on the cutting edge and shortens the initial entry phase, so holes are started cleaner with less walking. This design leads to consistent hole quality and fewer rejects when producing components that demand close tolerances. Stable short geometry for accurate results A reduced overhang is the main benefit of the short execution: it lowers bending moments and improves tool stability in handheld and bench drilling operations. The fully ground shaft and spiral geometry ensure excellent runout and roundness, which translates into noticeably better concentricity in the finished hole. For tasks where rigidity and repeatability matter, this configuration minimises vibration and helps maintain drill life under steady, cooled cutting conditions. Application focus and user advantages Engineered as a Type N twist drill, this tool excels in metalworking environments—from maintenance benches to production machinery. It is intended for use with a Drilling Machine or Hand Drill and performs well on alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short length makes it ideal where access is limited or where a stable, precise bore is required. Users gain higher process reliability and improved surface finish with fewer burrs to deburr. Operating tips to extend lifetime and maintain precision For optimal performance with the MetavCUT short twist drill, use appropriate cutting speeds and continuous coolant or cutting fluid when machining steels and tougher alloys. Feed rates should be consistent and matched to diameter and material; overfeeding can induce breakage, underfeeding can cause rubbing and work hardening. Given the ground geometry, regrinding is feasible but should be performed by experienced personnel to preserve the exact tip angle and helix form. Why standards and manufacturing details matter Compliance with DIN 338 signals standardised dimensions and tolerances for short twist drills with cylindrical shank. Ground manufacturing (HSS‑G) produces sharp cutting edges and high running accuracy, which is especially beneficial for precision metal drilling. The MetavCUT approach combines these standards with material choices to give a balance between edge sharpness and toughness suitable for frequent metalworking tasks. Strongly recommended: choose the MetavCUT Twist Drill for precision metal drilling—contact METAV Werkzeuge for expert consultation and application support via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47058-FDA Diameter: 5.8 mm Tip angle: 135° Type: Type N Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Execution: short Shank execution: fully ground Spiral length: 57 mm Total length: 93 mm Application: Drills for metal For drilling machine: Drilling Machine / Hand Drill Model series: Standard Line Norm: DIN 338 Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill from MetavCUT best suited for? The MetavCUT Twist Drill with its HSS‑E composition and 5% cobalt‑alloyed content is optimised for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many hard plastics; the 135° tip angle helps when penetrating harder materials such as stainless steel. How should the MetavCUT Twist Drill be used to avoid breakage? Use the MetavCUT Twist Drill with appropriate cutting speeds, steady coolant flow and correct feed rates; the short design reduces bending but correct machining parameters and cooling are essential to prevent chipping or fracture. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger drill diameters. Its design allows relatively simple regrinding and it withstands higher loads due to its geometry and material composition. Which three drill types exist? There are three primary drill types: Metal drill, Wood drill, and Stone/Concrete drill. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑edge at the drill point, lowering friction and thus required feed forces while improving centring of the Twist Drill in the workpiece. Can a metal drill be used for wood? A metal drill can be used in wood, but it offers worse guidance and a less clean result compared with dedicated wood drills; however metal drills are easier to resharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through hole is typically produced with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is not universally correct; evaluate your working conditions to decide whether the additional cost of HSSE is justified.

Karosseriebohrer — Body Drill, HSS‑G, 5.8 mm, 135° tip, double‑sided, bright finished by MetavCUT The Karosseriebohrer is a double‑sided Body Drill designed for precision metalworking with handheld Drilling Machines, ideal for thin sheet and structural metal applications. Double‑ended design for extended tool life Ground HSS‑G for fast, precise metal drilling 5.8 mm diameter with 135° tip for harder steels Fully ground shank for high concentricity Bright finished surface for smooth chip evacuation High performance through ground HSS geometry The HSS‑G construction of this Body Drill delivers a sharp, consistent cutting edge that reduces cutting forces and improves drilling speed. Because the flute geometry is produced by CNC grinding rather than rolling, the result is higher Rundlaufgenauigkeit and cleaner holes in alloyed and unalloyed steels. For users working with tougher materials, the 135° point angle shortens penetration time and improves centring on stainless steels and cast materials. This engineered geometry is particularly beneficial where reproducible hole quality is required. Practical benefits of the double‑ended design A double‑sided, or double‑ended, configuration makes the tool exceptionally economical in workshop routines. When one tip becomes blunt, the drill can be reversed to use the other cutting end, effectively providing two usable tips in one compact Twist Drill. This format is especially useful for operations on sheet metal and bodywork where short, stable drill bits reduce vibration and improve control with a Drilling Machine. Precision shaft and reliable handling The fully ground shank ensures secure clamping and improved concentricity in hand drills, translating to straighter holes and reduced wobble. The bright finished surface supports smoother chip flow and reduces the risk of material build‑up on the flutes. For craftsmen and technicians who expect repeatable results when machining Nichteisenmetalle or engineering plastics, this characteristic increases process reliability and reduces rework. Application focus and user groups Engineered as a Body Drill for metalworking, this tool is aimed at professional metalworkers, sheet metal fabricators and maintenance technicians who require robust, short‑length bits for rivet and thin‑sheet holes. The combination of HSS‑G and a 135° tip makes it suitable for a range of materials including cast iron, sintered iron and hard plastics. For workshop environments that demand predictable tool behaviour and easy re‑use, the double‑ended format and ground finish provide a pragmatic advantage. Safety and usage notes for best results To maximise life and performance, use the Karosseriebohrer with adequate cooling when machining harder alloys; the ground HSS form can be more brittle than rolled variants and benefits from moderated speeds and lubrication. Secure clamping, reduced feed force and intermittent peck drilling help avoid overload. For handheld Drilling Machine operations, ensure the chuck grips the fully ground shank firmly to maintain accuracy and reduce chatter. Choose MetavCUT precision — favour the Karosseriebohrer Body Drill with HSS‑G ground cutting for demanding metalwork and contact METAV Werkzeuge for expert advice or ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Information Designation: Karosseriebohrer Brand: MetavCUT SKU: 58058‑FDA Product type: Body Drill Material: HSS‑G Execution: double sided Colour: bright finished Diameter: 5.8 mm Point angle: 135° Spiral length: 16 mm Overall length: 66 mm Shank finish: fully ground For Drilling Machine: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Karosseriebohrer Body Drill by MetavCUT suitable for? The Karosseriebohrer Body Drill from MetavCUT is optimized for metalworking and performs well in alloyed and unalloyed steels, Cast Iron, Sintered Iron and hard plastics; its HSS‑G grind provides clean hole quality under appropriate speeds and cooling. Can the Karosseriebohrer be used in a handheld drilling machine? Yes, the Karosseriebohrer by MetavCUT is intended for use with a Drilling Machine; the fully ground shank ensures secure clamping and high concentricity in handheld setups when the chuck is tightened correctly. For what is a Twist Drill used? A Twist Drill is primarily applied to machining high‑strength materials and larger drill diameters; its form is easy to grind and withstands greater loads, which makes it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. Each is optimised in geometry and material for its specific application.

Spiralbohrer 5,8 mm, HSS-G, extra kurz (Typ N) – DIN 1897, 135° Spitzenwinkel, Zylinderschaft, blank – MetavCUT Standard Line Der Spiralbohrer von MetavCUT ist ein extra kurzer HSS-G Bohrer für präzise Metallbohrungen mit Handbohrmaschine, ideal für Bleche, Profile und mittlere Stahlstärken. Extra kurze Bauform für mehr Stabilität Bis zu 40 % schnelleres Bohren bei geringerem Kraftaufwand 135° Spitzenwinkel für Anbohrverhalten in harten Werkstoffen Zylinderschaft für universelle Aufnahme im Dreibackenfutter Geeignet für legierte und unlegierte Stähle sowie Nichteisenmetalle Kompakte Länge erhöht Standfestigkeit und reduziert Bruchrisiko Die extra kurze Ausführung reduziert Hebelwirkung und Vibration, was die Stabilität beim Bohren deutlich erhöht. Bei beengten Platzverhältnissen sorgt die geringere Gesamtlänge von 66 mm für bessere Handhabung in Winkelaufnahmen oder an Kanten. Durch die kürzere Spirallänge (28 mm) werden Späne schneller transportiert, wodurch die Bruchneigung bei dünnen Werkstücken sinkt. Der Einsatz eines HSS-G Materials bietet höhere Verschleißfestigkeit gegenüber einfachem Schnellarbeitsstahl und verlängert die Standzeit bei Serienbelastung. Präzise Anwendungen in Werkstatt und Montage sicher ausführen Als Bohrer im Standard-Bereich eignet sich dieses Werkzeug besonders für den Alltagsgebrauch in Werkstatt, Montage und Heimwerken. Der Spitzenwinkel 135° ermöglicht ein kontrolliertes Eindringen in härtere Materialien und reduziert Aufspitzen und Ausrisse. Bei der Bearbeitung von Baustahl, Guss oder Temperguss liefert der Bohrer gleichmäßige Bohrbilder; für hochpräzise Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um das Wandern des Bohrers zu vermeiden. Universelle Schaftform und praktische Einsatzhinweise Der Zylinderschaft erlaubt das Einspannen in gängige Dreibackenfutter und macht den Bohrer kompatibel mit handelsüblichen Handbohrmaschinen. Vorteil ist die einfache Montage und der universelle Einsatz; Nachteil kann unter sehr hohem Drehmoment ein leichtes Durchrutschen sein. Für erhöhte Rundlaufgenauigkeit und sichere Kraftübertragung empfiehlt sich eine sorgfältige Spannprüfung und gegebenenfalls Einsatz eines Spannzylinders oder einer Winkelschraubzwinge. Anwendungstipps für saubere Bohrbilder und lange Lebensdauer Vor dem Bohren sollte die Werkstückoberfläche entgratet und bei Bedarf gekühlt werden, insbesondere bei dichten oder legierten Werkstoffen. Bei Durchmessern im Standardbereich reicht in vielen Fällen direktes Bohren, bei hohen Genauigkeitsanforderungen ist Anpunkten sinnvoll. Reinigung der Bohrung und gelegentliches Nachschärfen erhalten die Schneidleistung; die robuste Standard Line Ausführung von MetavCUT bietet hier eine ausgewogene Kombination aus Standzeit und Wirtschaftlichkeit. Empfehlung: Den HSS-G Bohrer von MetavCUT als zuverlässige Wahl für präzise Metallbohrungen wählen und bei Fragen unsere technische Beratung per E‑Mail unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 nutzen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 56058-FDA Durchmesser: 5,8 mm Material: HSS-G Ausführung: extra kurz Typ: Typ N Norm: DIN 1897 Spitzenwinkel: 135° Schaftausführung: Zylinder Farbe: blank Gesamtlänge: 66 mm Spirallänge: 28 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Handbohrmaschinen geeignet? Der Spiralbohrer von MetavCUT wurde speziell für den Einsatz in Handbohrmaschinen konzipiert und bietet durch die extra kurze Bauform bessere Stabilität bei Arbeiten an Blechen und Profilen. Für welche Materialien ist der MetavCUT Spiralbohrer ausgelegt? Der MetavCUT Spiralbohrer eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; bei sehr zähen Werkstoffen empfiehlt sich der Einsatz von Kühlung. Warum ist der 135° Spitzenwinkel beim MetavCUT Spiralbohrer vorteilhaft? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert das Aufreißen beim Anbohren in härtere Werkstoffe und verkürzt die Anbohrzeit, wodurch kontrolliertere Bohrvorgänge möglich sind. Wie vermeide ich ein Durchrutschen im Bohrfutter mit dem MetavCUT Spiralbohrer? Um ein Durchrutschen des Zylinderschafts beim MetavCUT Spiralbohrer zu verhindern, sollte das Dreibackenfutter sauber und fest gespannt sowie bei hohen Drehmomenten ein Spannzylinder oder ein anderes Schrumpfspannsystem verwendet werden. Bietet MetavCUT Beratung, wenn unspezifische Fragen zur Anwendung bestehen? Bei Unsicherheit, ob der Spiralbohrer von MetavCUT die Anforderungen erfüllt, steht der Händler mit fachkundiger Beratung zur Verfügung; kontaktieren Sie info@metav-werkzeuge.com, rufen Sie +49 2822 7131930 an oder nutzen Sie WhatsApp unter +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#56058-FDA","sku":"56058-FDA","mpn":"56058-FDA","name":"Spiralbohrer 5,8 mm, HSS-G, extra kurz (Typ N)","description":"Extra kurzer Spiralbohrer 5,8 mm aus HSS-G mit 135° Spitzenwinkel, Zylinderschaft und DIN 1897 Norm; konzipiert für präzise Metallbohrungen mit Handbohrmaschine in Blechen, Profilen und mittleren Stahlstärken.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,8 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"extra kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1897"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Schaftausführung","value":"Zylinder"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"66 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"28 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Eignung","value":"Legierte und unlegierte Stähle, Guss, Temperguss, Nichteisenmetalle, Hartkunststoff"},{"@type":"PropertyValue","name":"Vorteile","value":"Mehr Stabilität, geringere Bruchneigung, schnelleres Bohren"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer 5,8 mm von MetavCUT für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 5,8 mm von MetavCUT wurde für den Einsatz in Handbohrmaschinen entwickelt und bietet durch die extra kurze Ausführung erhöhte Stabilität bei Blechen und Profilen."}},{"@type":"Question","name":"Für welche Materialien eignet sich der MetavCUT Spiralbohrer 5,8 mm?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 5,8 mm aus HSS-G ist geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; bei sehr zähen Werkstoffen wird Kühlung empfohlen."}},{"@type":"Question","name":"Warum ist der 135° Spitzenwinkel beim Spiralbohrer 5,8 mm vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel des Spiralbohrers 5,8 mm reduziert Aufspitzen beim Anbohren in härtere Werkstoffe und ermöglicht kontrolliertere Bohrvorgänge mit schnellerem Eindringen."}},{"@type":"Question","name":"Wie vermeide ich ein Durchrutschen im Bohrfutter mit dem MetavCUT Spiralbohrer 5,8 mm?","acceptedAnswer":{"@type":"Answer","text":"Um ein Durchrutschen des Zylinderschafts des MetavCUT Spiralbohrers 5,8 mm zu verhindern, sollte das Dreibackenfutter sauber und fest gespannt werden; bei hohen Drehmomenten empfiehlt sich ein Spannzylinder oder ein alternatives Schrumpfspannsystem."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-5-8mm-hss-g-extra-kurz-typ-n-din-1897","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Extra kurze Bauform für mehr Stabilität"},{"@type":"Thing","name":"HSS-G Material für längere Standzeit"}],"mentions":[{"@type":"Thing","name":"Zylinderschaft für Dreibackenfutter"},{"@type":"Thing","name":"DIN 1897 Norm"},{"@type":"Thing","name":"135° Spitzenwinkel für harte Werkstoffe"}]}]}

Spiralbohrer von MetavCUT, Typ N, Ø 5,8 mm, 135°, HSS‑G, geschliffen, kurz, DIN 338, blank Der Spiralbohrer von MetavCUT ist ein kurzer HSS‑G Metallbohrer (Typ N) für stabile und präzise Bohrungen in Stahl, Guss und anderen Metallen. Kurze Ausführung für hohe Stabilität Geschliffener HSS‑G Schaft für präzise Schnitte 135° Spitzenwinkel speziell für harte Werkstoffe Norm DIN 338: kurze Spiralbohrer mit Zylinderschaft Geeignet für Handbohrmaschine und Stationärbetrieb Höhere Präzision durch kürzere Auskraglänge Die kurze Ausführung reduziert das Ausbrechen und die Neigung zum Verbiegen, wodurch ein stabilerer Bohrvorgang entsteht. Gerade beim Bohren in harten Werkstoffen sorgt der HSS‑G geschliffene Schaft für saubere Bohrlöcher und einen gleichmäßigen Rundlauf. Das Ergebnis sind präzisere Passungen bei geringerer Nachbearbeitung, was Zeit und Material spart. Schnelleres Arbeiten bei geringerer Anpresskraft Aufgrund der Geometrie und der Oberflächenqualität ermöglicht der Bohrer ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS‑Ausführungen. Diese Effizienz unterstützt rationelles Arbeiten in der Werkstatt und reduziert Ermüdung bei Handgeführten Maschinen. Zuverlässige Konstruktion und Normkonformität Die Ausführung entspricht der DIN 338 für kurze Spiralbohrer mit Zylinderschaft und ist geschliffen gefertigt, was eine sehr scharfe Schneidekante und hohe Rundlaufgenauigkeit bietet. Die Kombination aus geschliffener Fertigung und Typ N Geometrie ist besonders vorteilhaft bei legierten und unlegierten Stählen sowie Gusswerkstoffen. Praktische Hinweise für den Einsatz und Pflege Für beste Ergebnisse mit dem 5,8 mm Bohrdurchmesser empfiehlt sich bei hoher Präzision ein kurzes Zentrieren vor dem Hauptbohren sowie der Einsatz von Kühlmittel bei Stahlbohrungen. Bei der Verwendung in Handbohrmaschinen sorgt die kurze Gesamtlänge für mehr Kontrolle; bei sehr harten oder dicken Werkstoffen ist ein stationärer Maschinenaufbau mit Kühlung empfehlenswert. Empfehlung: MetavCUT HSS‑G Kurzbohrer einsetzen und bei Fragen die kompetente Beratung von METAV Werkzeuge unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 45058-FDA Durchmesser: 5,8 mm Spitzenwinkel: 135° Typ: Typ N Farbe: blank Ausführung: kurz Material: HSS-G Schaft Ausführung: geschliffen Norm: DIN 338 Gesamtlänge: 93 mm Spirallänge: 57 mm Für Bohrmaschine: Handbohrmaschine / Stationär geeignet Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Werkstoffe lassen sich mit dem Spiralbohrer von MetavCUT (Typ N) bearbeiten? Der Spiralbohrer von MetavCUT (Typ N) eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff und bietet in diesen Materialien saubere Bohrbilder. Ist der MetavCUT Spiralbohrer für Handbohrmaschinen geeignet? Ja, der MetavCUT Spiralbohrer (Typ N) in kurzer Ausführung wurde für den Einsatz in Handbohrmaschinen sowie im stationären Betrieb konzipiert und bietet dadurch hohe Stabilität und Kontrolle. Warum ist die geschliffene Ausführung wichtig beim Spiralbohrer von MetavCUT? Die geschliffene Fertigung des MetavCUT Spiralbohrers führt zu schärferen Schneiden und besserem Rundlauf, was präzisere Bohrlöcher und geringeren Grataufbau zur Folge hat, besonders bei Metallbearbeitung. Wie sollte der MetavCUT Spiralbohrer gepflegt und eingesetzt werden? Beim Einsatz des MetavCUT Spiralbohrers empfiehlt sich Kühlung bei Stahl, kurzes Zentrieren bei hoher Präzision und moderater Vorschub; dadurch bleiben Standzeit und Bohrqualität optimal erhalten. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#45058-FDA","sku":"45058-FDA","mpn":"45058-FDA","gtin13":"","name":"Spiralbohrer 45058-FDA","description":"Kurz ausgeführter Spiralbohrer Typ N, Ø 5,8 mm, 135° Spitzenwinkel, HSS-G geschliffen, Zylinderschaft nach DIN 338, blank; geeignet für präzise Metallbohrungen in legierten und unlegierten Stählen, Guss und Nichteisenmetallen; kurze Auskraglänge für höhere Stabilität.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,8 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"93 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"57 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine / Stationär geeignet"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]} ,{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Werkstoffe lassen sich mit dem Spiralbohrer von MetavCUT (Typ N) bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Typ N) eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff und liefert in diesen Werkstoffen saubere Bohrbilder."}},{"@type":"Question","name":"Ist der MetavCUT Spiralbohrer für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer (Typ N) in kurzer Ausführung wurde für den Einsatz in Handbohrmaschinen sowie im stationären Betrieb konzipiert und bietet dadurch hohe Stabilität und Kontrolle."}},{"@type":"Question","name":"Warum ist die geschliffene Ausführung wichtig beim Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Fertigung des MetavCUT Spiralbohrers führt zu schärferen Schneiden und besserem Rundlauf, was präzisere Bohrlöcher und geringeren Grataufbau zur Folge hat, besonders bei der Metallbearbeitung."}},{"@type":"Question","name":"Wie sollte der MetavCUT Spiralbohrer gepflegt und eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Beim Einsatz des MetavCUT Spiralbohrers empfiehlt sich Kühlung bei Stahl, kurzes Zentrieren vor dem Hauptbohren bei hoher Präzision und moderater Vorschub; so bleiben Standzeit und Bohrqualität optimal erhalten."}}]} ,{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Typ N"},{"@type":"Thing","name":"Kurzbohrer DIN 338"},{"@type":"Thing","name":"HSS-G geschliffen"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"DIN 338"},{"@type":"Thing","name":"Kühlmittel"}]}]}

Twist Drill — Type N, 5.9 mm, HSS, Short, Black, 118° (DIN 338) by MetavCUT The Twist Drill is a short HSS Type N metalworking drill designed for precise drilling in Drilling Machines and Hand Drills across workshop and maintenance applications. Short HSS design for increased stability DIN 338 compliant for consistent quality 118° Tip for reliable centring Suited for Drilling Machine and Hand Drill Black finish for improved corrosion resistance Precision and Stability for Metalworking Manufactured as a short variant according to DIN 338, this Twist Drill offers enhanced stability and minimal deflection during machining. Because the protruding length is reduced, the tool runs truer in the chuck and transfers cutting forces more directly, resulting in straighter holes and longer tool life. This design is particularly beneficial when working with tougher materials where chatter and bending would normally compromise accuracy. Tip Geometry Optimised for Reliable Centring The 118° Tip provides a balanced compromise between fast penetration and good centring, making it well suited for softer steels, non-ferrous metals and general metalworking tasks. A narrower tip angle reduces the tendency to wander on curved or uneven surfaces, while the point geometry also lowers the initial radial forces so that drilling starts cleanly and precisely. This results in more accurate hole positioning and less rework. High Speed Steel Construction for Durable Performance Made from HSS (High Speed Steel), the drill combines toughness with wear resistance for typical metal drilling tasks. The roll-formed production method increases elasticity and reduces breakage risk in smaller diameters, while still allowing reliable performance in alloyed and unalloyed steels, cast iron, non-ferrous metals and selected plastics. Users benefit from a tool that tolerates machining stresses and can be resharpened when necessary, prolonging service life. Designed for Professional and Workshop Use This Twist Drill supports both stationary Drilling Machines and portable Hand Drills, providing versatility for tradespeople and maintenance technicians. The black surface finish helps to delay corrosion and eases chip evacuation, while the Type N normal spiral geometry focuses on efficient metal cutting. For demanding tasks where stability and repeatable results matter, this tool delivers consistent performance. Choose MetavCUT quality for confident metalworking — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or reach out via WhatsApp +49 170 2837271 Technical Details Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 40059-FDA Typ: Type N Durchmesser: 5.9 mm Spitzenwinkel: 118° Material: HSS Norm: DIN 338 Ausführung: Short Spiral Length: 57 mm Overall Length: 93 mm Colour: Black Application: Drills for metal Recommended For: Drilling Machine / Hand Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill (Type N) is primarily applied to metalworking; it is used especially for machining tougher materials and larger drill diameters where tool stability is essential. Its HSS construction allows effective drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and some plastics. Which three drill types are commonly available? The three main drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill is classified as a Metal Drill suited to machining metals. Why are Twist Drills pointed? The point reduces the size of the cross-cutting edge at the tip. Pointing the Twist Drill significantly lowers friction and therefore the required feed force, while improving the drill tip’s ability to self-centre in the workpiece for cleaner starts. Can the Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but it will typically have less guidance and produce a rougher finish than a dedicated Wood Drill. Metal drills are easier to resharpen and show less self-feeding, which can be an advantage or disadvantage depending on the task. At which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is often executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool.

Twist Drill — Type N short, 5.9 mm, 135°, 5% cobalt-alloyed, HSS‑E, fully ground shank, DIN 338 The Twist Drill Type N short is a precision metal‑drilling tool designed for Drilling Machines and demanding work on hard materials. Short design for improved stability 5% cobalt‑alloyed HSS‑E for higher heat resistance 135° point angle for hard materials Fully ground shank for precise runout DIN 338 compliant Standard Line Higher performance through material and geometry The combination of HSS‑E and 5% cobalt provides noticeably improved red‑hardness and wear resistance, which means longer tool life when machining tough alloys. The short design reduces cantilever and vibration, resulting in more consistent hole quality and less risk of runout. This configuration is especially sensible where repeatable, clean holes are required and small deviations cannot be tolerated. Optimised for hard materials and precise entry A 135° point angle reduces the tendency to wander and shortens the initial bite when working Stainless Steel or other hard metals, so drilling starts more reliably. The designation Type N denotes the classic spiral geometry for metalwork; it balances chip evacuation and wall finish. For users unfamiliar with point angles: a larger angle produces a flatter tip that spreads cutting forces and reduces chatter on hard materials. Manufacturing method and practical advantages The fully ground flute geometry (HSS‑G style) gives very sharp cutting edges and excellent concentricity, producing clean bores with minimal burr. Ground drills are easier to re‑sharpen and deliver superior roundness compared with roll‑formed equivalents, though they require appropriate coolant and steady feeds to minimise fracture risk. The DIN 338 classification confirms that this short Twist Drill meets standard dimensions and tolerances for professional Metalworking. Suitable applications and handling recommendations Designed for use in Drilling Machines, the short Twist Drill is ideal for precise machining of alloyed and unalloyed steel, cast iron, non‑ferrous metals and engineering plastics. Use moderate cutting speeds and steady feed; apply coolant for stainless and other high‑temperature materials to extend life. If uncertain about speeds or regrinding, METAV Werkzeuge offers expert advice and technical support to match the tool to the application. Strong recommendation for precision metalworking: choose the MetavCUT Twist Drill Type N short for stable, reliable holes — for personalised technical guidance contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47059-FDA Diameter: 5.9 mm Point angle: 135° Type: Type N Material: HSS‑E Execution: short Spiral length: 57 mm Overall length: 93 mm Shank execution: fully ground Model series: Standard Line Norm: DIN 338 Colour: 5% cobalt‑alloyed For: Drilling Machine Application: Drills for metal Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N short used for? The MetavCUT Twist Drill Type N short is primarily applied when machining high‑strength materials and for larger bore diameters; its short geometry increases stability, the shape allows straightforward resharpening and the tool endures higher loads in professional Metalworking. Which three drill types exist? There are three principal drill categories: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N short belongs to the Metal drills group and is optimised for metal applications.

Karosseriebohrer HSS‑G, Ø 5,9 mm, 135°, doppelseitig, blank, geschliffen, Standard Line, MetavCUT Der Karosseriebohrer ist ein doppelseitiger HSS‑G‑Bohrer für Metall mit Ø 5,9 mm und 135° Spitzenwinkel, geeignet zur Verarbeitung von Blech und Stahl mit Handbohrmaschine. Doppelseitig nutzbar für schnellen Wechsel Geschliffener HSS‑G für präzise Metallbohrungen 135° Spitzenwinkel reduziert Anbohrverformung Kompatibel mit Handbohrmaschine für Karosseriearbeiten Robuste Schneide für saubere Metalllöcher und höhere Effizienz Der geschliffene HSS‑G‑Werkstoff steht für hohe Schnittgüte und dauerhaft scharfe Kanten, was saubere Bohrlöcher mit gleichmäßigem Spanbild erzeugt. Durch den CNC‑Schliff entsteht eine hohe Rundlaufgenauigkeit, die das Auswandern des Bohrers beim Anbohren minimiert. Anwender profitieren von bis zu 40 % schnellerem Bohren und 50 % weniger Anpresskraft gegenüber konventionellen HSS‑Bohrern, was die Produktivität bei Serien und Einzelteilen steigert. Wendbarkeit erhöht Nutzungsdauer und Werkstatttempo Die doppelseitige Ausführung als Doppelendbohrer erlaubt die sofortige Nutzung der zweiten Spitze nach Stumpfwerden der ersten, praktisch wie „zwei Bohrer in einem“. Diese Bauart sorgt für kurze Ausfallzeiten in der Werkstatt und ist besonders bei Niet‑ und Dünnblechlöchern im Karosseriebau vorteilhaft. Die kompakte Bauform erhöht die Stabilität und reduziert Vibrationen bei der Handführung. Geeignet für typische Werkstattanwendungen und Zielgruppen Mit einem Durchmesser von 5,9 mm gehört der Bohrer in den Standard‑Bereich (2,0–13,0 mm) und ist ideal für Werkstätten, Karosserie‑Betriebe und ambitionierte Heimwerker. Die Einsatzgebiete umfassen legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle sowie Hartkunststoff. Bei handgeführten Maschinen bietet das Werkzeug eine ausgewogene Kombination aus Flexibilität und Leistung für Alltagsaufgaben. Hinweise für sicheren und langlebigen Einsatz Geschliffene Bohrer können bei falscher Anwendung spröde reagieren; deshalb empfiehlt sich bei harten Werkstoffen eine geeignete Kühlung und moderater Vorschub. Für besonders zähe Materialien sollte die Bohrung schrittweise erweitert werden, um die Querschneide zu entlasten. Durch richtige Spannungs‑ und Kühlschmierstoffwahl lässt sich die Standzeit erhöhen und die Bohrbildqualität erhalten. Empfehlung: Vertrauen Sie auf die MetavCUT Standard Line HSS‑G Karosseriebohrer für präzise und effiziente Metallbohrungen und nutzen Sie bei Fragen die kompetente Beratung von METAV Werkzeuge unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten für sichere Auswahl Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58059-FDA Durchmesser: 5,9 mm Spitzenwinkel: 135° Ausführung: doppelseitig (Doppelendbohrer) Schaft Ausführung: geschliffen Material: HSS‑G Farbe: blank Gesamtlänge: 66 mm Spirallänge: 16 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was macht den MetavCUT Karosseriebohrer für Metall besonders? Der MetavCUT Karosseriebohrer kombiniert geschliffenes HSS‑G mit einer doppelseitigen Bauart, wodurch präzise Bohrlöcher in Blech und Stahl erzielt werden und bei Stumpfheit schnell die zweite Spitze genutzt werden kann. Ist der Karosseriebohrer von MetavCUT für Handbohrmaschinen geeignet? Ja, der MetavCUT Karosseriebohrer mit Ø 5,9 mm ist für den Einsatz in Handbohrmaschinen ausgelegt und eignet sich besonders für dünne bis mittlere Bleche und Karosseriearbeiten. Wie sollte mit dem MetavCUT Karosseriebohrer bei harten Werkstoffen verfahren werden? Bei harten Werkstoffen empfiehlt sich für den MetavCUT Karosseriebohrer die Nutzung von Kühlmittel sowie moderater Vorschub; bei Bedarf schrittweise Aufbohren, um die Standzeit zu erhöhen. Kann der Karosseriebohrer von MetavCUT auch in Gusseisen und Nichteisenmetallen verwendet werden? Der MetavCUT Karosseriebohrer ist geeignet für Gusseisen, Temperguss sowie Nichteisenmetalle und bietet dank geschliffener Geometrie saubere Bohrbilder in diesen Werkstoffen. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#58059-FDA","sku":"58059-FDA","mpn":"58059-FDA","name":"Karosseriebohrer 58059-FDA","description":"Karosseriebohrer HSS‑G, Ø 5,9 mm, 135° Spitzenwinkel, doppelseitig, blank, geschliffen; geeignet für Blech und Stahl mit Handbohrmaschine; hohe Rundlaufgenauigkeit und saubere Bohrbilder; ideal für Werkstätten und Karosseriearbeiten.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"5,9 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Material","value":"HSS‑G"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"66 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"16 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Was macht den MetavCUT Karosseriebohrer für Metall besonders?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Karosseriebohrer kombiniert geschliffenes HSS‑G mit einer doppelseitigen Bauart, wodurch präzise Bohrlöcher in Blech und Stahl erzielt werden und bei Stumpfheit schnell die zweite Spitze genutzt werden kann."}},{"@type":"Question","name":"Ist der Karosseriebohrer von MetavCUT für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Karosseriebohrer mit Ø 5,9 mm ist für den Einsatz in Handbohrmaschinen ausgelegt und eignet sich besonders für dünne bis mittlere Bleche und Karosseriearbeiten."}},{"@type":"Question","name":"Wie sollte mit dem MetavCUT Karosseriebohrer bei harten Werkstoffen verfahren werden?","acceptedAnswer":{"@type":"Answer","text":"Bei harten Werkstoffen empfiehlt sich für den MetavCUT Karosseriebohrer die Nutzung von Kühlmittel sowie moderater Vorschub; bei Bedarf schrittweise Aufbohren, um die Standzeit zu erhöhen."}},{"@type":"Question","name":"Kann der Karosseriebohrer von MetavCUT auch in Gusseisen und Nichteisenmetallen verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Karosseriebohrer ist geeignet für Gusseisen, Temperguss sowie Nichteisenmetalle und bietet dank geschliffener Geometrie saubere Bohrbilder in diesen Werkstoffen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-58059-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer HSS‑G"},{"@type":"Thing","name":"Doppelendbohrer für Karosserie und Blech"},{"@type":"Thing","name":"Standard Line MetavCUT"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Kühlmittel bei harten Werkstoffen"},{"@type":"Thing","name":"CNC‑geschliffene Geometrie"}]}]}

Twist Drill — MetavCUT Type N, 5.9 mm, 135° Point, HSS‑G, Extra Short, Bright Finish, DIN 1897 An Twist Drill (Type N) for Drilling Machines providing extra‑short stability and precise metal drilling in confined spaces. MetavCUT Type N for metal drilling Extra Short design for greater stability 135° point angle for harder materials Cylindrical shank fits standard three‑jaw chucks HSS‑G ground for faster, lower‑force drilling High-performance drilling for hardened and alloyed metals The extra‑short HSS‑G Twist Drill delivers improved stability and reduced breakage risk when working with steels and other hard materials. The 135° point angle optimises penetration in tougher alloys and shortens the pilot phase, resulting in more efficient cutting when compared with standard‑length drills. Thanks to the ground geometry, the Tool requires less axial force and allows for controlled cutting even under demanding conditions. Reliable results in tight or thin‑walled assemblies Short overall length and reduced flute length make this Twist Drill especially suitable for work in confined spaces or thin materials such as sheet metal and profiles. The Extra Short format increases torsional stiffness and reduces chatter, which improves hole quality and concentricity. This construction is a practical choice for Hand Drilling Machines and situations where workspace is limited. Simple mounting and universal compatibility Equipped with a Cylindrical shank, this Twist Drill is compatible with standard three‑jaw chucks and thus integrates easily into existing workshop setups. The classic Type N spiral geometry is optimised for metalworking and offers straightforward re‑sharpening when required. For operations demanding high repeatability, the combination of HSS‑G material and precise grinding ensures consistent performance across batches. Target users and recommended applications Designed for machinists, maintenance technicians and industrial workshops, the MetavCUT Twist Drill is targeted at drilling tasks in legated and unlegated steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The tool is particularly advantageous where quick, accurate holes are needed in challenging materials or restricted environments, providing a balance of durability and ease of use. Strong recommendation: Choose the MetavCUT Twist Drill (Type N) with Extra Short HSS‑G geometry for precision metalworking in confined spaces — METAV Werkzeuge offers expert technical advice and selection support at info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56059-FDA Diameter: 5.9 mm Total Length: 66 mm Spiral Length: 28 mm Point Angle: 135° Type: Type N Execution: Extra Short Colour/Finish: Bright Finished Shank Execution: Cylindrical (Round Shank) Material: HSS‑G Standard: DIN 1897 For Machine: Drilling Machine (Handbohrmaschine) Model Series: Standard Line Application: Drills for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of a Twist Drill? A MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its form is easy to re‑grind and resists higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? Common categories are Metal Drills (such as the MetavCUT Twist Drill Type N), Wood Drills, and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑cut at the tip of a Twist Drill, significantly lowering friction and required feed forces while improving centring and hole start accuracy for MetavCUT drills. Can a metal Twist Drill be used in wood? A metal drill like the MetavCUT Twist Drill can be used in wood but will guide less well and produce a less clean finish; however, it is easier to re‑grind and exhibits lower self‑feeding tendencies. For which drilling depths is the Twist Drill most commonly used? A through hole in solid material is typically executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill remains the most frequently used tool.

Twist Drill — Short HSS-G Twist Drill, 5.9 mm, 135°, Type N, Bright Finish, Short, DIN 338 A Twist Drill designed as a Short HSS-G Type N for precise metal drilling with portable and stationary Drilling Machines. Short design for higher stability in tight setups 135° tip optimised for hard materials such as stainless steel HSS‑G ground geometry for clean, precise holes Fully ground shank for reliable concentricity Conforms to DIN 338 for short cylinder‑shank drills Improved accuracy when drilling hard metals The short HSS‑G configuration reduces overhang and vibration, delivering noticeably better hole quality in demanding materials. With a 135° tip, the drill penetrates harder steels with less wandering, while the ground flute geometry produces clean chips and consistent hole diameters. For machinists and maintenance professionals this means fewer reworks and higher first‑pass accuracy when working with cast iron, alloyed and unalloyed steels. Greater stability and easier handling in tight setups A reduced overall length and shorter protrusion from the chuck increases stiffness and reduces bending under load. The fully ground shank improves runout and seating in the chuck, which is especially valuable for precision assemblies and toolroom work. This short twist drill is therefore well suited to stations where rigidity and repeatability are required, for example toolmaking, repair shops and production cells. Practical guidance and maintenance for long service life The Type N normal spiral and HSS‑G designation mean the bit is ground (not rolled) for sharp cutting edges and high concentricity; however the brittle quality of ground HSS recommends controlled feeds, appropriate cutting fluid and moderate speeds. Regrinding is straightforward because of the standard geometry. For best results use coolant when drilling deep or tough alloys and avoid excessive feed spikes to reduce breakage risk. Strong recommendation: The MetavCUT Short HSS‑G Twist Drill is ideal for precision metalworking — for personalised advice or additional technical data please contact METAV Werkzeuge: info@metav-werkzeuge.com; Tel +49 2822 7131930; WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 45059-FDA Diameter: 5.9 mm Tip angle: 135° Type: Type N Execution: Short Colour/Finish: Bright finish Material: HSS-G Spiral length: 57 mm Overall length: 93 mm Shank design: Fully ground Model series: Standard Line Application: Drills for metal Standard: DIN 338 For use with: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What makes the MetavCUT Twist Drill suitable for hard metals? The MetavCUT Twist Drill in Short HSS‑G execution combines a 135° tip and ground cutting geometry that reduce wandering and improve chip formation, making this Type N drill particularly effective when working in hard or alloyed steels and cast materials. Can the MetavCUT Twist Drill be used in handheld drills and machines? Yes, the MetavCUT Short Twist Drill is designed for use with both portable and stationary Drilling Machines; the short overhang and fully ground shank improve stability and concentricity when clamped in chucks. What are Twist Drills mainly used for? Twist Drills are primarily employed for machining high‑strength materials and larger drill diameters; their shape is easy to regrind and they withstand substantial loads. Which three drill types exist? The three main drill families are Metal drills, Wood drills and Stone/Concrete drills.