Magnetic workholding systems that speed up machining
Magnetic workholding systems provide a secure, repeatable way to fix ferrous components for machining operations, combining either mechanical or electromagnetic activation to suit milling, grinding and EDM applications. By delivering consistent holding force measured in kgf and controllable magnetic flux density in gauss, these systems improve setup speed and reduce distortion on precision parts while enabling efficient chip evacuation. Commonly used as magnetic chucks or magnet plates, they offer versatile fixturing for diverse machining centres and allow quick changeovers between jobs.
125x250mm Magnetic Chuck 26N/mm² Holding Force 50mm Height - Vertex
Take advantage of reliable clamping, a compact 125 x 250 mm footprint and a solid 15 kg mass for stable machining — order the VG-510 directly via Metav Werkzeuge or ask our consultants if needed. VG-510 Magnetic clamping plate by Vertex — compact size, strong hold A VG-510 magnetic clamping plate designed for precision workholding on small to medium machine tables, combining a compact footprint with secure magnetic retention. Compact 125 x 250 mm footprint Low profile 50 mm height Stable mass: 15 kg for vibration damping Magnetic force 26 for secure clamping Shorter setup, consistent machining quality The VG-510 delivers secure magnetic clamping that reduces workpiece movement during machining, translating directly into fewer rejects and faster cycle times. The specified magnetic force 26 provides a constant holding effect across the contact surface, which supports repeatable positioning and stable cutting conditions. For users seeking measurable productivity gains, the device’s performance reduces the need for mechanical fixtures and shortens changeover routines, helping to maintain a smooth production flow. Space-saving design for flexible integration With a 125 x 250 mm footprint and a 50 mm overall height, the unit is tailored to machines with limited table space or to jigs where a low profile is essential. The compact format enables installation close to tooling and fixtures without obstructing spindle access, while the controlled dimensions help plan multiple setups on the same table. This design allows shops to increase effective machine utilisation, fitting precise holding capability into tighter machining layouts. Robust build for stable results and long service life Weighing 15 kg, the clamping plate adds inherent mass that dampens micro-vibrations and contributes to quiet, stable operation under load. The solid construction supports consistent contact pressure across the plate and reduces chatter during finishing passes. Manufactured by Vertex, the design emphasises durability and predictable behaviour in routine production, so maintenance intervals remain straightforward and machine uptime is optimised. Practical handling and application guidance The magnetic system is intended for ferromagnetic workpieces and is particularly useful for grinding, milling and light turning operations where a clean, flat contact surface improves accuracy. The plate’s flat footprint assists in aligning and seating parts quickly; when finer positioning is required, parallel mechanical references or soft jaws may be used in combination. Routine care is limited to keeping the contact surfaces clean and free of swarf and coolant to preserve holding performance and to ensure repeatable clamping force. For expert advice on integrating the VG-510 into existing workflows or to request a quotation, contact Metav Werkzeuge — Metav’s consultants and stock in Emmerich provide reliable delivery and application support Technical Data Article number: VG-510 GTIN: 4061905086472 Manufacturer: Vertex ECLASS: 21020809 Facts Weight: 15 kg Dimensions: 125 x 250 mm Height: 50 mm Magnetic force: 26 Special features SKU: VG-510 Image available: vg-407-main.jpg Category: Vertex FAQ What types of workpieces are suitable for this magnetic clamping plate? The VG-510 magnetic clamping plate is designed for ferromagnetic workpieces; it achieves best performance on steel and other magnetic metals. Can the VG-510 be used on small machine tables? Yes. The compact 125 x 250 mm footprint and 50 mm height allow integration on smaller tables where space is limited. How does the weight influence machining stability? The 15 kg mass of the plate increases stability by damping vibrations, which improves surface finish and reduces chatter during cutting. Is the magnetic force adjustable? The specification lists a magnetic force of 26; for adjustable-holding requirements, consult Metav Werkzeuge about alternative models or accessories. Which manufacturer produces this clamping plate? This unit is produced by Vertex and marketed under the VG-510 designation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125x250mm Magnetic Chuck Fine Pole Distribution, 30N/mm² Holding Force - Vertex
Benefit from a compact magnetic clamping solution that combines very fine pole distribution with a robust holding force and a space-saving footprint; order directly via Metav Werkzeuge or consult our specialists for application advice. VRTW-1325S Magnetic chuck by Vertex — very fine pole distribution, compact 125 x 250 mm The VRTW-1325S is a compact magnetic chuck designed for secure clamping of small and medium workpieces in precision machining and grinding applications Very fine pole distribution for small parts Compact footprint 125 x 250 mm 50 mm height for stable clamping Magnetic force 30 Precise clamping for small and delicate components The very fine pole distribution of this magnetic chuck delivers a uniform holding surface that reduces local stress and minimises marking on delicate workpieces. By concentrating the magnetic field across many small poles, the design provides a consistent grip for thin components and complex geometries. This characteristic is particularly beneficial where repeatable positioning and minimal deformation are required; the fine pole distribution thus supports higher first-pass yields and fewer reworks. In contexts where component accuracy matters, the stable magnetic contact translates directly into improved process reliability and predictable outcomes. Space-efficient design with machine-ready stability With dimensions of 125 x 250 mm and a height of 50 mm, the unit fits compact workstations while offering a low centre of gravity for vibration resistance during machining. The mass of 13 kg gives the chuck inherent stability without consuming excessive bench space, allowing flexible integration into bench-mounted setups or small machine tables. The compact footprint simplifies fixture planning and shortens set-up time, supporting lean workflow on production lines that handle diverse part batches. The combination of compact dimensions and solid construction enables consistent clamping performance across short production runs and prototyping tasks. Dependable holding power and machining performance A rated magnetic force of 30 ensures reliable retention of workpieces during common machining and finishing operations, reducing the likelihood of surface slip or positional drift. The magnetic system is engineered to deliver repeatable engagement and disengagement cycles without complex servicing, while the fine-pole topology reduces the magnetic footprint on finished surfaces. For technicians and process engineers, the result is a balance between strong retention and gentle contact — suitable for operations where both precision and part protection are priorities. Clear mechanical behaviour under load simplifies process planning and inspection workflows. Supply reliability and partner advantages from Metav Sourced from Vertex and distributed via Metav Werkzeuge, this magnetic chuck benefits from a European logistics and quality filter based in Emmerich. Metav’s broad selection and long-standing market presence provide straightforward procurement and centralised supply for precision workshops and industrial users. The supplier’s focus on democratising precision ensures access to consistent product quality and straightforward stock management, reducing the administrative burden associated with multiple vendors while maintaining reliable delivery to the workbench. Contact Metav Werkzeuge to discuss the suitability of the Vertex VRTW-1325S magnetic chuck for specific machining tasks and to arrange prompt delivery from their European stock in Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VRTW-1325S GTIN: 4061905094958 ECLASS: 21020809 Core data Dimensions: 125 x 250 mm Height: 50 mm Weight: 13 kg Magnetic force: 30 Special features Very fine pole distribution Type: S Brand: Vertex FAQ What workpiece sizes are best clamped on this chuck? The VRTW-1325S magnetic chuck is optimised for small to medium workpieces thanks to its very fine pole distribution, which enhances contact for compact parts. How does the fine pole distribution affect finished surfaces? Fine pole distribution reduces localised magnetic pressure and minimises marking on finished surfaces, making the unit suitable where surface integrity is important. Is the chuck suitable for bench and machine-table use? Yes, the compact dimensions and 13 kg mass provide a low centre of gravity and machine-ready stability for bench-mounted or table-mounted setups. How is the holding strength specified? Holding strength is indicated as magnetic force 30; this rating provides dependable retention for typical machining and finishing operations. Who supplies this magnetic chuck in Europe? The chuck is supplied by Vertex and distributed through Metav Werkzeuge, offering European stock and logistic support. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Magnetic Chuck Round Rapid-Action Holding, 9.8kg - Vertex
Take advantage of compact, repeatable clamping with the 150 mm round design and a sturdy 78 mm profile for reliable setups; order directly via Metav Werkzeuge or request tailored advice from our consultants. Vertex VGD-06 Magnetic Chuck — round, 150 mm diameter The VGD-06 magnetic chuck is a compact round workholding plate designed for precision clamping in general workshop and light machining environments. Compact 150 mm diameter Stable 78 mm height construction Robust mass for vibration damping Designed for precise workholding Consistent precision through magnetic clamping Magnetic chucks convert a controlled magnetic field into a repeatable clamping force, eliminating many mechanical variables associated with mechanical jaws. The VGD-06 delivers a stable holding surface across its 150 mm diameter, which translates into fewer repositioning steps and more consistent part geometry during sequential operations. For projects where traceable repeatability matters, the magnetic principle reduces chatter and supports tighter run-out tolerances, making this device a pragmatic choice for shops seeking measurable improvements in cycle-to-cycle accuracy. Space-saving design that supports efficient workflows A compact footprint combined with a 78 mm profile allows the unit to integrate into constrained machine beds and small workstations without compromising performance. The chuck’s intrinsic mass—approximately 9.8 kg—adds damping that counters minor vibration during cutting or grinding, helping to preserve surface finish and tool life. The round form factor simplifies orientation and mounting for rotary or indexing applications, so changeovers become quicker and the machine uptime increases, supporting leaner production sequences and reduced handling times. Supply reliability and industrial provenance Sourcing the VGD-06 through Metav Werkzeuge connects buyers with a supplier that emphasises accessibility to precision. Metav’s presence in Emmerich acts as a practical “quality filter” for the European market, combining a broad catalogue with dependable logistics. This relationship supports predictable stock levels and transparent order handling, which is particularly valuable for procurement teams who require steady supply and verified origin. The combination of a well-proven clamping principle and a trustworthy distribution channel contributes to lower operational risk and steadier shopfloor performance. Discuss technical suitability and availability with Metav Werkzeuge — request a specification review for the Vertex VGD-06 magnetic chuck via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VGD-06 GTIN: 4061905083488 Dimensions & weight Diameter: 150 mm Height: 78 mm Weight: 9.8 kg Features & classification Brand: Vertex Shape: round eCl@ss: 21020809 FAQ What materials can be clamped on this magnetic chuck? The VGD-06 magnetic chuck is intended for ferromagnetic parts; non-magnetic materials require suitable fixturing or backings to enable magnetic clamping. How does the chuck reduce setup time compared with jaw clamping? By using a uniform magnetic field across its surface, the chuck offers faster part placement and repeatable orientation, which commonly shortens fixturing steps compared with individual mechanical clamps. Can the VGD-06 be mounted on small lathes and mills? The compact 150 mm diameter and 78 mm height make the unit suitable for smaller machine beds where a round, space-efficient clamping solution is required. Is the magnetic field switchable for safe part loading? The VGD-06 is built as a magnetic workholding plate; switching or control options depend on the specific chuck model and any associated control accessories — consult the technical specifications for details. What logistical support does Metav provide for this product? Metav Werkzeuge maintains European distribution and aims to ensure clear order processing and reliable supply, supporting predictable procurement and delivery timelines. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Magnetic Chuck With Fine Pole Distribution, 28 N Magnet Force - Vertex
Take advantage of the combination of precise clamping with a fine pole distribution, a compact 50 mm profile and reliable magnetic holding to keep production running smoothly; order directly via Metav Werkzeuge or contact our consultants for tailored advice. VGF-1515BS Magnetic Clamping Plate (fine pole distribution) by Vertex A VGF-1515BS magnetic clamping plate designed to offer dependable, compact workholding where a fine pole distribution is required for precision tasks in metalworking and toolrooms Fine pole distribution for secure clamping Low-profile design: 50 mm height Robust magnetic force: 28 Solid build weight: 9 kg Secure, repeatable clamping with fine pole control The fine pole distribution provides a uniform magnetic field across the face, enabling reliable support for small to medium-sized ferrous components. This arrangement reduces point loading and improves flatness during machining, so setups remain consistent over repeated cycles. The design is aimed at improving process stability through a more even holding surface, translating into fewer reclamps and reduced secondary operations for better throughput. Compact form for easier machine integration With a 50 mm profile and a mass of 9 kg, the plate offers a low centre height and inherent stability that suits machines with limited clearance. The compact dimensions allow straightforward mounting on conventional tables while keeping the workpiece close to the spindle axis, which helps to maintain alignment and minimise vibration. The compact footprint also simplifies handling and storage in busy workshop environments. Clear performance specification and safe handling The rated magnetic force: 28 expresses the unit's holding capacity as supplied; this characteristic supports confident selection for appropriate tasks and faster job planning. Built for routine industrial use, the clamping plate emphasises straightforward operation and predictable behaviour under load. When paired with established workholding protocols, the result is improved cycle efficiency and consistent part quality, making it a pragmatic choice for demanding production environments. Contact Metav Werkzeuge to discuss how the Vertex VGF-1515BS magnetic clamping plate can integrate into existing setups and to request a detailed specification or quote Technical data Article number: VGF-1515BS GTIN: 4061905094972 Manufacturer: Vertex Facts Height: 50 mm Weight: 9 kg Magnetic force: 28 Type: BS Special features Fine pole distribution SKU: VGF-1515BS eClass: 21020809 FAQ What materials is the clamping plate suitable for? The VGF-1515BS magnetic clamping plate is intended for ferrous workpieces where magnetic holding is effective, utilising its fine pole distribution to support smaller features. How does the fine pole distribution benefit precision work? A finer pole pitch on the VGF-1515BS spreads the magnetic field more evenly, reducing local deformation and enabling more consistent machining results. What are the mounting dimensions and profile? The plate has a low profile with a height of 50 mm, designed for compatibility with standard machine tables and fixtures. Is the magnetic force value sufficient for heavy milling? The specification lists a magnetic force of 28, which should be assessed alongside workpiece geometry and machining forces to determine suitability for heavy operations. Who manufactures this magnetic clamping plate? The product is manufactured by Vertex and supplied under the SKU VGF-1515BS for traceability and specification matching. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Magnetic Chuck With Fine Pole Distribution, 30 N Magnet Force - Vertex
A compact, high-precision clamping solution that combines a very fine pole distribution, consistent holding force and space-saving dimensions to support repeatable machining. Benefit from stable workpiece fixation, reduced setup time and a reliable supply chain — order the magnetic chuck directly via Metav Werkzeuge or consult the team for application advice. VRTW-1535A Magnetic chuck by Vertex — 150 x 350 mm, fine pole distribution The VRTW-1535A is a compact magnetic chuck designed for precision clamping of small to medium workpieces in milling, grinding and general workshop applications. Very fine pole distribution for precise gripping Compact size 150 x 350 mm for small workpieces Strong magnetic force: 30 for reliable hold Reduced setup time through predictable clamping performance The finely divided pole layout delivers a consistently distributed magnetic field that minimises slippage and distortion during machining. With a very fine pole distribution, the clamping surface supports small and irregularly shaped components while maintaining a low profile. This results in shorter adjustment cycles and fewer refixtures, which in turn improves throughput on repetitive tasks. The design therefore supports stable process parameters and measurable productivity gains in serial and job-shop environments. Durable hold and straightforward handling for daily workshop use Built to provide a reliable holding force across the full plate, the clamping plate keeps parts secure during medium-duty milling and grinding operations. The compact footprint of 150 x 350 mm and a height of 50 mm make the unit suitable for benches and machine tables with limited space, without compromising accessibility. The permanent magnetic system ensures immediate clamping without auxiliary power; maintenance is limited to routine cleaning and inspection, delivering operational simplicity and long-term dependability. Versatile integration into existing workflows and quality routines The magnetic clamping plate integrates into typical machining sequences as a quick-change fixture option that reduces fixturing complexity. Its repeatable positioning supports dimensional stability and simplifies alignment checks during setup and quality control. Combined with Metav’s supply reliability and technical advice, this solution helps workshops achieve consistent results while centralising procurement and support. Documentation and asset imagery are available for specification checks prior to purchase. Contact Metav Werkzeuge in Emmerich for tailored application guidance and to secure the Vertex magnetic chuck that fits precise clamping requirements Technical data SKU: VRTW-1535A GTIN: 4061905086236 eClass: 21020809 Facts Dimensions: 150 x 350 mm Height: 50 mm Weight: 21 kg Magnetic force: 30 Special features Very fine pole distribution Article image: vrtw-1018a-main.jpg Brand: Vertex FAQ What materials can be clamped with this magnetic chuck? The magnetic clamping plate is optimised for ferrous materials; the VRTW-1535A secures steel and similar workpieces reliably due to its finely distributed pole pattern. How does the fine pole distribution affect machining results? A finer pole pitch provides more contact points and a more even magnetic field, which reduces local deformation and improves stability during cutting and grinding operations. Is the unit suitable for small, irregular parts? Yes. The fine pole layout of this magnetic chuck supports smaller and irregularly shaped components, improving grip and reducing the need for complex mechanical fixtures. Can the plate be used on smaller machine tables? The compact 150 x 350 mm footprint and 50 mm height make it suitable for smaller tables or benches where space is restricted while still offering effective clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x150mm Magnetic Chuck 26N/mm² Holding Force, 50mm Height - Vertex
Compact, precise clamping for small workpieces: the VG-606 combines a small footprint with a powerful hold and stable mass to reduce setup time and improve machining accuracy. Order the VG-606 directly via Metav Werkzeuge or consult our technical advisors for an optimised clamping solution. VG-606 Magnetic clamping plate — compact 150 x 150 mm unit with magnetic force 26 | Vertex The VG-606 is a compact magnetic clamping plate designed for secure fixturing of small workpieces in milling and grinding applications. Compact 150 x 150 mm footprint Robust 50 mm operating height Strong magnetic force 26 for secure hold Weighs 9 kg for stable placement Maximum grip in a small footprint for reliable machining The compact 150 x 150 mm platform delivers a concentrated clamping area that helps to reduce machine table occupation while maintaining a secure hold on small components. The device’s magnetic force 26 provides consistent clamping pressure that minimises micro-movements during cutting and grinding, thereby supporting improved dimensional repeatability. For operators unfamiliar with magnetic clamping, the principle is straightforward: a uniform magnetic field presses the workpiece against the plate across its contact surface, reducing the need for elaborate mechanical jigs and accelerating setup times without sacrificing precision. Faster setup and safer processes through stable design A 50 mm operating height combined with a mass of 9 kg gives the plate inherent stability during machining, lowering the risk of vibration-induced errors. The compact form factor allows quick repositioning and straightforward integration into existing fixtures, which contributes directly to shorter non-productive times on the shop floor. Because magnetic clamping distributes force across the contact area, the method reduces point stresses that can deform delicate parts; this translates into fewer rejects and fewer follow-up adjustments, supporting overall production efficiency. Seamless workshop integration and consistent accuracy Built for repeatable use in demanding environments, this magnetic clamping solution from Vertex enables consistent part presentation for successive operations, aiding in process reliability. The plate’s straightforward geometry makes it simple to combine with parallel supports or locating pins when precise datum alignment is required. Regular, light maintenance — such as keeping the contact faces clean and free of ferrous debris — preserves optimal performance and extends operational lifetime, delivering dependable clamping performance shift after shift. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VG-606 magnetic clamping plate into production; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical consultation Technical data SKU: VG-606 GTIN: 4061905087189 eClass: 21020809 Manufacturer: Vertex Facts Dimensions: 150x150mm Height: 50mm Weight: 9 kg Magnetic force: 26 Special features Product type: Magnetic clamping plate Brand: Vertex Compact footprint for small workpieces FAQ How strong is the clamping capability and what does the value 26 mean? The clamping value listed as 26 indicates the relative magnetic force rating for the VG-606 magnetic clamping plate; in practice this supports reliable fixation of small to medium workpieces for machining and finishing operations. Is the VG-606 suitable for milling and grinding applications? Yes, the VG-606 magnetic clamping plate by Vertex is designed for use in milling and grinding, where a consistent magnetic hold and stable base help to maintain accuracy. How should the magnetic plate be maintained to ensure long service life? Regular cleaning of contact surfaces and removal of metal debris will preserve the magnetic clamping performance of the VG-606 and reduce wear on both the plate and the workpieces. Can the magnetic clamping plate be combined with mechanical locating elements? Yes, the compact design of the VG-606 allows straightforward use with locating pins or parallels to establish precise datums while taking advantage of magnetic fixation. Does the weight of 9 kg affect machine table loading? The VG-606’s weight of 9 kg provides useful stability during machining; the plate’s compact dimensions help to keep overall table loading manageable while improving resistance to vibration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x150mm Magnetic Chuck Fine Pole Distribution, 50mm Height, 30 N/cm² Magnetic Force - Vertex
Compact and stable precision clamping with a very fine pole grid and a solid 50 mm profile ensures secure holding of small components while saving bench space; combine these strengths for consistent, repeatable results. Order the VRTW-1515A Magnetic Clamping Plate directly via Metav Werkzeuge or ask our consultants if needed. VRTW-1515A Magnetic Clamping Plate (Vertex) — very fine pole distribution, 150 × 150 mm The VRTW-1515A Magnetic Clamping Plate is a compact fixture designed for precision workholding of small components, suitable for inspection, light machining and measuring tasks. Compact 150 x 150 mm footprint Very fine pole distribution for small parts Robust 50 mm height and 9 kg mass Reliable magnetic force rating 30 Secure small-part clamping with minimal setup The finely spaced pole pattern provides a uniform magnetic surface that keeps small workpieces stable without the need for bulky mechanical clamps. This reduces setup time and minimises obstruction around the component, supporting more efficient workflows in measuring and light machining operations. The fine pole distribution preserves access to the workpiece while maintaining a reliable hold, making it suitable for precision fixtures and inspection routines. Stable platform for repeatable precision With a compact 150 × 150 mm footprint and a solid 50 mm profile, the device delivers a low centre of gravity and enhanced mass dampening thanks to its 9 kg weight. These attributes translate into reduced vibration and improved positional stability during operations where consistent seating and repeatability matter. The combination of compactness and stability supports ergonomic bench layouts and keeps adjacent tooling accessible. Understandable performance: what the specifications mean The listed magnetic force value of 30 indicates the clamping capability under rated conditions; paired with the fine pole grid, this enables secure retention of small and thin parts that are otherwise difficult to hold. “Pole distribution” refers to the spacing and size of the magnetic poles across the plate surface—finer distribution means smaller contact points and better support of intricate or irregular components. This explanation helps clarify why a fine-grid magnetic plate can outperform coarse-pole alternatives for delicate work. Practical handling and shop-floor fit The unit’s compact dimensions and clear mechanical profile make it straightforward to integrate into a bench or measuring table. Its design supports quick placement and repeatable positioning for small-batch tasks and inspection setups. For applications that prioritise accessibility to the workpiece and a predictable holding behaviour, this magnetic clamping plate provides a pragmatic balance of footprint, weight and magnetic capability. Contact Metav Werkzeuge to discuss the suitability of the Vertex VRTW-1515A magnetic clamping plate for specific tasks or to request supplementary technical data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VRTW-1515A GTIN: 4061905085130 Manufacturer: Vertex Facts Dimensions: 150x150mm Height: 50mm Weight: 9 Magnetic force: 30 eClass: 21020809 Type: A SKU: VRTW-1515A Special features Very fine pole distribution Compact workholding footprint Sturdy profile for vibration damping Image available FAQ How does the fine pole distribution affect holding of small parts? The fine pole distribution on the VRTW-1515A Magnetic Clamping Plate creates smaller, closely spaced magnetic contact zones, which increases contact points and improves retention of small or irregularly shaped components. Is the plate suitable for inspection and measuring tasks? Yes. The compact footprint and stable profile of the Vertex magnetic clamping plate make it well suited for inspection, gauging and light measuring operations where unobstructed access to the workpiece is needed. What does the magnetic force value of 30 indicate? The magnetic force rating of 30 represents the plate’s holding capability under rated conditions; combined with the fine pole grid, it ensures consistent retention for small components during light machining and inspection. Can the VRTW-1515A be used on a bench or measuring table? The plate’s compact 150 × 150 mm size and solid 50 mm profile are specifically designed for easy integration on benches and measuring tables, providing a stable and repeatable workholding surface. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x150mm Magnetic Chuck With Fine Pole Distribution, 30N Magnet Force, 50mm Height - Vertex
Take advantage of precise clamping, a compact 150 x 150 mm working surface and a firm magnetic hold — the combination supports consistent machining results and shorter setup times. Order the component directly via Metav Werkzeuge or consult the team for application advice. Magnetic chuck VRTW-1515S — 150 x 150 mm, very fine pole distribution (Vertex) The magnetic chuck VRTW-1515S is a compact clamping plate designed for precision machining of small and delicate workpieces in workshop and production environments. Fine pole distribution for accurate clamping Compact 150 x 150 mm working surface Robust 50 mm height for stability Strong magnetic force of 30 for secure hold Precision clamping that reduces rework and saves time The VRTW-1515S offers precision through a very fine pole distribution, which improves surface contact on small and irregularly shaped parts. A finer pole pitch means the magnetic field is distributed more evenly across the workpiece surface, reducing point loading and the need for extensive mechanical fixturing. The compact 150 x 150 mm footprint is suitable for small fixtures and bench-top milling or grinding stations, enabling faster changeovers and more efficient batch processing. By improving workpiece support and minimising micro-movement during cutting, this chuck helps reduce rejects and downstream rework. Stability and machine compatibility for consistent results A solid 50 mm profile provides a stable mounting plane and a low centre of gravity that helps absorb machining forces and limit vibration. The device’s weight of 9 kg contributes to a firm base on tooling plates or machine tables, supporting repeatable set-ups and consistent surface finishes. The magnetic rating (listed as magnetic force: 30) delivers reliable holding power for light to medium machining tasks without overcomplicating handling. For operations that demand reproducible positioning — such as precision milling, grinding or spark erosion of small parts — the unit’s design focuses on operational reliability and predictable performance. Simple integration and clear productivity benefits Integration into work flows is straightforward: the compact format and uniform pole layout enable quick positioning of small jigs and direct-fixtured parts, cutting non-productive time. The equipment supports rational shop-floor decisions by offering a balance of clamping flexibility and a secure hold, which together increase throughput and lower process variability. Metav’s role as a precision partner ensures a dependable supply chain and practical advice on mounting and maintenance, making the chuck a pragmatic choice for workshops seeking measurable productivity gains and dependable results. Contact Metav Werkzeuge in Emmerich for tailored mounting advice and delivery information on the Vertex VRTW-1515S magnetic chuck — email info@metav-werkzeuge.com to discuss suitability for specific machining tasks Technical data Article number: VRTW-1515S GTIN: 4061905094934 Manufacturer: Vertex Facts Dimensions: 150 x 150 mm Height: 50 mm Weight: 9 kg Magnetic force: 30 Type: S eClass: 21020809 Special features Very fine pole distribution Compact design for small workpieces Category: Vertex FAQ What size of workpiece is suitable for this chuck? The VRTW-1515S is optimised for small components and jigs; its 150 x 150 mm face is intended for compact parts and bench-top machining tasks. How does the fine pole distribution affect clamping? A very fine pole distribution increases contact points and evens the magnetic field across the surface, improving stability and reducing the need for additional fixtures when using the Vertex magnetic chuck. Is the magnetic holding power sufficient for milling operations? The chuck’s magnetic force rating of 30 provides secure holding for light to medium machining; suitability for heavier cuts should be assessed against specific machining parameters. What mounting considerations apply for this type? The 50 mm height and 9 kg mass create a stable base; ensure the machine table or fixture plate accepts the VRTW-1515S dimensions and that the workholding arrangement prevents overhangs that could affect clamping efficiency. Which Vertex model number should be referenced when ordering accessories? Reference the SKU VRTW-1515S when enquiring about accessories or replacement parts to ensure compatibility. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x300mm Magnetic Chuck 50mm Height 26N Magnet Force - Vertex
Combine a compact 150 x 300 mm footprint with a robust 50 mm profile and dependable magnetic force 26 for secure, repeatable workholding; the result is improved setup consistency and reduced rework. Order the VG-612 via Metav Werkzeuge or consult our specialists for application-specific advice. VG-612 Magnetic Clamping Plate by Vertex – 150 x 300 mm, 50 mm height The VG-612 Magnetic Clamping Plate is a compact magnetic chuck designed to deliver reliable, repeatable clamping in machining and finishing applications. Compact 150 x 300 mm footprint Robust 50 mm height Magnetic force 26 for secure clamping Solid 18.5 kg mass for stability Consistent precision with a compact footprint The compact format and controlled profile of this magnetic chuck provide a reliable base for repetitive operations. With a 150 x 300 mm contact area and a 50 mm overall height, the unit minimises the need for frequent repositioning while enabling precise alignment on smaller workpieces. The engineering focus is on providing repeatable clamping so that setups remain stable across batch runs, which reduces cycle interruptions and helps maintain throughput without sacrificing accuracy. Stable holding power that reduces vibration and rework Thanks to its substantial mass and magnetic holding capability, the clamping plate dampens machining vibration and sustains contact pressure throughout the cutting or grinding process. The device's 18.5 kg mass works in tandem with the magnetic force 26 to keep components firmly seated, which contributes to improved surface finish and fewer rejects. This combination supports productivity gains by lowering the frequency of rechecks and secondary adjustments during production. Easy integration into shop processes for faster turnarounds Sized to suit bench-top and smaller machine setups, the clamping plate integrates into existing workflows without complex adaptations. Its compact dimensions make it straightforward to handle, store and position for mixed production schedules. As a workholding device focused on practicality, it streamlines changeovers and reduces non-productive time, thereby enhancing operational efficiency in busy workshops. Built for dependable, long-term workshop use Manufactured under the Vertex name, this magnetic clamping plate emphasises durability and consistent performance. Built components and straightforward functionality support routine maintenance and predictable service life, aligning with professional workshop expectations. Paired with Metav Werkzeuge's quality filter and supply reliability from Emmerich, the solution is positioned to deliver steady availability and informed procurement for industry customers. For secure, repeatable clamping from Vertex, contact Metav Werkzeuge in Emmerich for expert guidance and reliable delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VG-612 GTIN: 4061905085802 eClass: 21020809 Manufacturer: Vertex Core specifications Dimensions: 150 x 300 mm Height: 50 mm Weight: 18.5 kg Magnetic force: 26 Other features Product type: Magnetic clamping plate (magnetic chuck) Brand: Vertex Image: available FAQ What are the external dimensions of this clamping plate? The magnetic clamping plate has external dimensions of 150 x 300 mm, providing a compact work surface suitable for small to medium components. What is the height and overall mass of the unit? The device measures 50 mm in height and weighs 18.5 kg, offering stability and vibration damping during machining. How strong is the magnetic holding capability? The clamping plate is specified with a magnetic force of 26, delivering dependable holding power for consistent workholding. Which SKU identifies this product for ordering? This product is listed under SKU VG-612 and is supplied by Vertex as a magnetic clamping solution. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x300mm Magnetic Chuck Fine Pole Distribution, 30 N/cm² Holding Force - Vertex
Benefit from precise, consistent workholding delivered by a compact chuck with fine-pole distribution and a substantial mass for vibration damping; order directly via Metav Werkzeuge or consult their specialists for integration into existing machining setups. VRTW-1530A magnetic chuck – fine-pole distribution, 150 x 300 mm (Type A) by Vertex A VRTW-1530A magnetic chuck designed for precise workholding in metalworking and machining applications, offering a compact footprint and detailed pole spacing for small or complex components Fine pole distribution for precise workholding Compact 150 x 300 mm footprint Magnetic force 30 for reliable clamping Robust 18 kg build for stable machining Hold small and complex components with predictable precision The fine-pole distribution of the magnetic chuck ensures an even magnetic field across the work surface, which improves contact for small or irregularly shaped parts and reduces the need for additional clamps. With a clear footprint of 150 x 300 mm, the plate is suited to medium-sized set-ups where table space is at a premium. The specified magnetic force 30 provides a measurable clamping characteristic that supports repeatable positioning and secures components during finishing operations. This combination of detailed pole spacing and consistent attraction contributes directly to shorter set-up times and higher first-pass yields. Improve machining stability through mass and geometry A substantial build mass helps to dampen vibration during cutting and finishing; the plate’s 18 kg weight and 50 mm height contribute to a stable base that resists chatter and movement. The Type A configuration focuses on a balanced construction suited to standard machine tables, aiding concentricity and flatness during operations. Reduced vibration influences tool life positively and leads to more consistent surface finishes, which in turn lowers rework rates. Compatibility with common clamping workflows means the plate integrates into production with minimal alteration to standard fixturing practices. Built for workshop reliability and efficient procurement The VRTW-1530A from Vertex is presented as a durable workholding solution that fits into lean manufacturing routines: its compact size simplifies storage and handling while its engineered pole layout supports diverse holding scenarios. Metav Werkzeuge supplies this unit from a European distribution hub, providing a steady supply chain and access to application advice tailored to industrial users. Choosing a proven workholding plate contributes to predictable output, supports process standardisation and aligns with quality-driven procurement policies common in precision workshops. Contact Metav Werkzeuge today to discuss how the Vertex VRTW-1530A magnetic chuck with fine-pole distribution can be specified for current machining tasks—consultants in Emmerich provide application guidance and assured supply from stock. Technical Data Article number: VRTW-1530A GTIN: 4061905087325 ECLASS: 21020809 Type: A Manufacturer: Vertex Facts Dimensions: 150x300mm Height: 50mm Weight: 18 kg Magnetkraft: 30 Special features Very fine pole distribution Compact workholding plate Asset image available (vrtw-1018a-main.jpg) FAQ What are the external dimensions of the plate? The VRTW-1530A has external dimensions of 150 x 300 mm, with an overall height of 50 mm, suitable for compact setups. Is this chuck suitable for small and irregular parts? Yes, the fine-pole distribution of the Vertex magnetic chuck improves contact on small and irregular components, making the VRTW-1530A appropriate for detailed workholding. How does the mass of the plate affect machining? The plate’s 18 kg mass contributes to vibration damping and a stable machining base, which helps maintain surface finish quality and tool life. What does the listed magnetic force mean in practice? The specification magnetic force 30 indicates a defined clamping characteristic that supports reliable holding; exact clamping performance will depend on part geometry and surface condition. Can the plate be procured and delivered within Europe? Metav Werkzeuge lists and distributes the Vertex VRTW-1530A through its European hub, ensuring supply reliability and access to application advice for industrial customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x300mm Magnetic Chuck With Fine Pole Distribution, 50mm Height, 30N/cm² Magnetic Force - Vertex
A compact, heavy-duty solution that combines precise clamping from a very fine pole layout with a stable 18 kg construction to reduce vibration and movement during machining. The small footprint and consistent holding force make it ideal for repeatable setups; order the magnetic clamping plate directly via Metav Werkzeuge or consult our specialists for application advice. VRTW-1530S Magnetic clamping plate — very fine pole distribution, compact 150 x 300 mm, Vertex A VRTW-1530S magnetic clamping plate designed for precision workholding in toolrooms and workshop milling, offering fine pole spacing for minimal deformation and reliable holding of small to medium workpieces Very fine pole distribution for accurate clamping Compact 150 x 300 mm plate for small setups Strong magnetic force for secure workholding 50 mm height with solid 18 kg construction Stable precision for small and medium workpieces The plate delivers consistent holding power thanks to its very fine pole distribution, which spreads the magnetic field across a larger contact area and reduces point loads that can distort thin or uneven components. This arrangement supports accurate machining by keeping parts steady under cutter forces, improving dimensional repeatability and reducing the need for frequent re-clamping. Designed as a compact workholding solution, the device is particularly suited to precision tasks where surface integrity and positional accuracy are essential. Compact footprint with robust stability and repeatable set-up With a footprint of 150 x 300 mm and a height of 50 mm, the unit offers a space-efficient method for clamping on limited table space while maintaining a solid 18 kg mass that aids vibration damping. The specified magnetic force of 30 provides a reliable retention characteristic appropriate for many small-to-medium milling, drilling and grinding operations. The combination of compact size and mass reduces micro-movement during machining, which translates into cleaner finishes and fewer rejected parts. The plate’s geometry supports quick placement and removal, helping to shorten cycle times in repetitive production. Practical handling, maintenance and workshop integration The construction focuses on low-maintenance operation and straightforward integration into existing fixturing routines. Fine pole systems typically reduce marking on softer metals and support clamping of thin-walled or delicate parts without additional mechanical fixtures. Routine care—keeping the pole faces free of swarf and coolant residue—maintains optimal magnetic contact and prolongs service life. The VRTW-1530S is suitable for use in toolrooms and small-series production, where compact, magnetic clamping solutions provide an efficient alternative to traditional mechanical clamps; compatibility with common machining workflows allows flexible deployment across jobs. Consult Metav Werkzeuge for tailored recommendations on integrating the Vertex VRTW-1530S into production processes or to discuss suitable fixturing options for specific materials and geometries Technical Data Article number: VRTW-1530S GTIN: 4061905094941 Brand: Vertex Core data Dimensions: 150x300mm Height: 50mm Weight: 18 kg Magnetic force: 30 Type: S Special features Very fine pole distribution Compact plate for small setups Robust construction for vibration damping FAQ How does the fine pole distribution affect workholding performance? The very fine pole distribution increases contact uniformity and reduces point pressure, so the VRTW-1530S magnetic clamping plate holds thin or irregular parts with less risk of distortion and improved surface quality. Which machining operations suit this clamping plate best? The plate is suitable for milling, drilling and grinding of small-to-medium components where a compact, stable magnetic clamping solution is required; it supports repeatable setups and reduces setup time. Is the magnetic force rating of 30 sufficient for light alloy components? Yes, the magnetic force of 30 is specified to provide secure holding for many light alloy and steel workpieces in small-series machining; larger or heavily loaded operations may require a larger workholding system. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x350mm Magnetic Chuck 26N/cm Holding Force 50mm Height - Vertex
Reliable machining benefits from a compact footprint combined with substantial holding force and mass: the 150 x 350 mm surface, magnetic force 26 and 20.9 kg weight provide steady, repeatable clamping for small to medium workpieces. Order the VG-614 directly via Metav Werkzeuge or ask our consultants if needed. VG-614 Magnetic Chuck — Vertex, 150 x 350 mm, magnetic force 26 The VG-614 is a compact magnetic clamping plate intended for secure workholding in machining environments Compact 150 x 350 mm footprint Strong magnetic force rating 26 Sturdy 20.9 kg mass for stability 50 mm height for low-profile clamping Stable workholding for precise results The VG-614 magnetic clamping plate delivers a reliable combination of surface area and holding capacity that supports dimensional accuracy during machining. The defined 150 x 350 mm contact surface concentrates the holding effect while the 20.9 kg mass dampens vibrations; together these factors reduce chatter and help preserve tool life. By converting magnetic attraction into a uniform holding force, the system maintains part position without the point loads introduced by mechanical clamps, improving finish and repeatability. Low-profile design that speeds set-up A 50 mm height provides a low-profile mounting that keeps parts close to the table, reducing lever effects and simplifying fixturing. The low clearance makes it easier to align components and to use standard tooling without additional spacers. Magnetic clamping avoids concentrated clamping pressure on soft materials, which lessens the need for protective fixtures and shortens cycle times — a rational advantage for batch production and frequent part changes. Practical flexibility across workshop tasks The magnetic clamping plate is suitable for a range of flat-surfaced workpieces where quick changeovers and secure grip are priorities. The predictable holding behaviour of the device supports straightforward alignment and reduces the risk of rework when tolerances are tight. Where surface finish and dimensional control matter, the unit’s mass and magnetic capacity help maintain consistent machining conditions while keeping the clamp footprint compact. For stable, repeatable results rely on Vertex magnetic clamping — contact Metav Werkzeuge in Emmerich for a technical consultation or to request a quotation. Technical data SKU: VG-614 GTIN: 4061905086038 Manufacturer: Vertex ECLASS: 21020809 Dimensions & weight Dimensions: 150 x 350 mm Height: 50 mm Weight: 20.9 kg Magnetic force: 26 Features Magnetic clamping plate Low-profile design Robust mass for stability FAQ What materials can be clamped with this magnetic system? The VG-614 magnetic chuck is designed for flat ferrous workpieces; the holding principle relies on ferromagnetic contact for secure clamping. How does the magnetic force value influence machining? A magnetic force 26 indicates the relative holding capacity; higher holding force improves resistance to cutting loads and helps preserve part position during finishing operations. Is the VG-614 suitable for repeated quick changeovers? Yes, the magnetic clamping plate supports fast part changes and reduced set-up time thanks to its uniform contact area and predictable holding behaviour. Does the low-profile height affect tool clearance? The 50 mm height keeps workpieces close to the table and typically improves tool clearance by reducing the need for additional spacers or elevated fixturing. What advantages does the device’s weight provide in operation? The 20.9 kg mass increases stability and dampens vibration, contributing to improved surface finish and dimensional repeatability during machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x400mm Magnetic Chuck With Fine Pole Distribution, 30N Holding Force - Vertex
Benefit from precise holding thanks to the combination of very fine pole distribution, compact dimensions and dependable magnetic force 30 for a smooth workflow; order the Magnetic Clamping Plate VRTW-1540A directly via Metav Werkzeuge or request advice from our consultants. Magnetic Clamping Plate VRTW-1540A — Type A magnetic chuck with very fine pole distribution The Magnetic Clamping Plate VRTW-1540A is a Type A magnetic chuck engineered for precise workholding on small to medium machine tables, offering fine pole distribution for improved contact and clamping consistency. Very fine pole distribution for precise clamping Compact 150 x 400 mm footprint for small parts 50 mm height for low-profile stability Robust magnetic force 30 for reliable hold Faster setup and consistent, exact positioning The fine pole spacing delivers consistent contact across the workpiece, improving clamping precision and reducing the need for iterative repositioning. This results in shorter setup times and higher throughput on batch runs. The controlled magnetic characteristics support repeatable positioning, which benefits processes where dimensional conformity is critical. Where conventional chucks can lead to variable contact points, the fine pole layout ensures a more uniform field and therefore a steadier hold over successive operations. Compact footprint with stable mass for machine integration With a plate size of 150 x 400 mm and a low profile of 50 mm, the unit fits easily into constrained machine environments while providing a substantial base for machining tasks. The mass of 24 kg contributes to vibration damping and steady support during cutting or grinding. This combination of compact form and solid weight makes the device suitable for installations where table space is limited but stability must not be compromised, supporting smoother toolpaths and cleaner surface finishes. Practical features that simplify workshop workflow Designated as Type A and equipped with a very fine pole distribution, the chuck is intended for secure holding of ferromagnetic workpieces in a variety of workshop settings. The clear mechanical proportions and the specified magnetic rating allow planners to assess integration into existing fixtures or workholding stations without lengthy adjustments. Maintenance requirements are minimal when handled according to standard shop practice, and the straightforward geometry permits uncluttered access for inspection and cleaning between operations. Contact Metav Werkzeuge today to discuss how the Vertex Magnetic Clamping Plate VRTW-1540A can be integrated into the production line and to arrange technical consultation from our precision specialists Technical data SKU: VRTW-1540A GTIN: 4061905094316 ECLASS: 21020809 Numbers / Core technical data Dimensions: 150 x 400 mm Height: 50 mm Weight: 24 kg Magnetic force: 30 Special features / Versions Very fine pole distribution Type A design Manufacturer: Vertex FAQ What size of workpieces is the magnetic chuck best suited for? The magnetic clamping plate VRTW-1540A is designed for small to medium workpieces, its 150 x 400 mm footprint offering ample contact area for many common components. Is the VRTW-1540A compatible with non-ferrous materials? Magnetic clamping equipment such as the VRTW-1540A is intended for ferromagnetic workpieces; non-ferrous materials require alternative workholding methods. How does the fine pole distribution affect machining quality? A very fine pole distribution on the VRTW-1540A increases the uniformity of contact, improving clamping precision and contributing to more consistent machining results. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x450mm Magnetic Chuck With 50mm Height, 26 kN Holding Force - Vertex
Take advantage of the combination of robust magnetic fixation, compact 150 x 450 mm dimensions and a low 50 mm profile for efficient workholding. Order the VG-618 directly via Metav Werkzeuge or ask our consultants for tailored integration advice. VG-618 Magnetic Clamping Plate — 150 x 450 mm, 50 mm height (Vertex) A VG-618 magnetic clamping plate designed for secure workpiece fixation on milling, grinding and light machining processes, offering compact dimensions and high stability. Compact 150 x 450 mm footprint Low 50 mm profile for tight setups High magnetic force value 26 Solid 27.5 kg mass for stability Precision clamping for stable machining results The VG-618 is configured to provide consistent positioning and reliable holding power across repeated cycles. Its compact footprint and low profile make it suitable where table space is limited but accurate fixation is essential. The solid mass of the assembly contributes to vibration damping, improving surface finish and reducing rework. Because the plate is built for straightforward integration into standard machine tables, changeover times are minimised and throughput can be increased without complex fixturing. Designed for shop-floor practicality and easy handling Constructed with a focus on durability, the clamping plate offers a balance between robust construction and manageable handling. The 50 mm height allows closer approach to tooling and simpler loading of workpieces in confined setups. The combination of compact dimensions and a substantial weight supports stable machining even during more demanding passes, while the unit's format simplifies storage and transport within the workshop. Routine checks and basic cleaning keep the device performing reliably over time. Versatile applications across common metalworking tasks The magnetic clamping plate serves as an efficient solution for a broad range of operations, from precision finishing to short-run milling tasks. Its layout supports quick alignment of ferrous workpieces and reduces the need for complex mechanical clamps in many applications. Where accessibility and cycle time are priorities, the device helps streamline workflows by enabling fast set-up and repeatable holding — benefits that translate directly into improved process efficiency and predictable output quality. Operational benefits and integration considerations When integrating the unit into production, the focus should be on ensuring a clean contact surface and verifying flatness of both the workpiece and machine table to maximise holding effectiveness. The plate’s intrinsic mass provides inherent stability, but attention to surface condition and correct seating will support full utilisation of the magnetic characteristics. For workshops seeking to standardise fixturing across machines, this compact clamping solution reduces the need for multiple specialised fixtures and promotes a more consistent setup routine. Discuss procurement of the Vertex VG-618 magnetic clamping plate with Metav Werkzeuge for seamless integration and workshop optimisation — our consultants can advise on suitability and delivery from Emmerich. Technical Data Article number: VG-618 GTIN: 4061905086199 Manufacturer: Vertex Facts Dimensions: 150 x 450 mm Height: 50 mm Weight: 27.5 kg Magnetic force: 26 ECLASS: 21020809 Special features Magnetic clamping plate design Compact footprint for limited table space Image available for reference FAQ What are the exact dimensions and profile of the clamping plate? The clamping plate measures 150 x 450 mm with a profile height of 50 mm, as stated for the VG-618 magnetic clamping plate by Vertex. Is the VG-618 suitable for milling and grinding operations? Yes, the VG-618 magnetic clamping plate is suitable for milling and grinding where ferrous workpieces require stable magnetic fixation and a low-profile setup. How heavy is the unit and why does that matter? Weighing 27.5 kg, the plate’s mass contributes to vibration damping and stability during machining, improving surface finish and repeatability. What does the magnetic force value 26 indicate? The value 26 is the provided magnetic force indicator for the VG-618; correct seating and clean contact surfaces are needed to realise its holding capability. Can non-ferrous materials be clamped directly on this plate? Non-ferrous materials require appropriate fixturing or a magnetic chuck adapter; the VG-618 is designed primarily for ferrous workpieces. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150x450mm Magnetic Chuck With Fine Pole Distribution, 30N/cm² Holding Force - Vertex
Take advantage of a compact footprint, reliable magnetic holding and robust construction to streamline precision clamping in the workshop — order the unit directly via Metav Werkzeuge or consult our team for application advice. VRTW-1545A Magnetic Clamping Plate — 150 x 450 mm, high-density pole distribution the VRTW-1545A magnetic clamping plate is designed for stable, accurate workholding of small to medium components on machining centres and surface grinders High magnetic holding force 30 Compact 150 x 450 mm working surface Robust 50 mm height, 26 kg mass Consistent clamping for precise machining results The magnetic clamping solution provides a stable workholding platform that reduces part movement during machining. The compact 150 x 450 mm surface with a very fine pole distribution increases contact points for small or thin workpieces, improving position repeatability and reducing the need for individual mechanical fixtures. With a magnetic force rating of 30 and a solid mass of 26 kg, the plate dampens vibration and supports a reliable machining process, which helps maintain tolerances and surface quality. Faster set-ups and improved workshop efficiency Switching to magnetic clamping decreases non-productive time compared with multiple mechanical clamps, as components can be located and secured more rapidly on the magnetic plate. The low-profile 50 mm height optimises spindle-to-work distance while the high-density pole pattern allows flexible part placement and shorter cycle times. This contributes to measurable throughput gains and simpler fixturing for batch production or frequent job changes. Durable design and straightforward integration into machine shops Built as a Type A unit for general workshop use, the device is engineered for repetitive daily operation and easy handling on the machine table. The substantial weight provides inherent stability without elaborate anchoring, and the fine pole layout supports delicate clamping without concentrated pressure points. Supplied by Vertex and distributed through Metav Werkzeuge’s European quality filter, the plate pairs industrial sturdiness with accessible procurement for trade and industry. Contact Metav Werkzeuge today to request the VRTW-1545A from Vertex and secure a dependable magnetic clamping solution for precision production — consultants in Emmerich provide technical selection guidance and reliable delivery Technical data Article number: VRTW-1545A GTIN: 4061905094774 Manufacturer: Vertex Facts Dimensions: 150 x 450 mm Height: 50 mm Weight: 26 kg Magnetic force rating: 30 Type: A ECLASS: 21020809 Special features Very fine pole distribution Designed for machining workholding Category: Vertex Asset image available (main view) FAQ What is the primary benefit of a fine pole distribution on a magnetic clamping plate? A fine pole distribution increases the number of contact points for small parts, improving positional repeatability and reducing the need for individual fixtures when using the VRTW-1545A magnetic clamping plate from Vertex. Can the plate be integrated into existing milling or grinding set-ups? Yes, the VRTW-1545A is designed for straightforward integration on standard machine tables where a compact 150 x 450 mm work surface and a 50 mm profile are suitable for machining tasks. How does the weight of the clamping plate affect machining stability? The 26 kg mass of this magnetic plate contributes to inherent stability and vibration damping during cutting operations, supporting consistent surface finishes and dimensional control. Is the magnetic holding force specified for heavy-duty industrial use? The unit carries a magnetic force rating of 30 as specified by Vertex; this rating, combined with its construction, makes it appropriate for secure holding of small to medium components in many machining applications. Which SKU should be referenced when ordering or enquiring about accessories? Reference SKU VRTW-1545A and the Vertex brand when requesting information or accessories to ensure compatibility and accurate support. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1515mm Magnetic Chuck Fine Pole Distribution, 28 kN Holding Force, 50mm Height - Vertex
Take advantage of precise workholding with the combination of fine pole distribution, reliable magnetic force 28, and a compact 50 mm height for stable machining. Order the magnetic clamping plate directly via Metav Werkzeuge or consult our specialists for application advice. Magnetic clamping plate VGF-1515B — Type B with fine pole distribution, reliable magnetic force A magnetic clamping plate VGF-1515B for precise workholding in machining and grinding, designed to secure small and intricate components with improved contact control Fine pole distribution for accurate workholding Strong magnetic force rating 28 50 mm overall height for stable setup Robust 9 kg construction for workshop use Secure small and delicate parts with predictable precision The fine pole distribution provides multiple, closely spaced contact zones that increase effective grip on small components while reducing the risk of distortion. This arrangement supports consistent force distribution across the workpiece, which improves repeatability during milling and grinding operations. The design reduces the need for frequent repositioning, resulting in shorter setup times and more predictable machining results. Consistent magnetic performance for steady machining Built to deliver a magnetic force 28, the plate creates a reliable holding field suitable for many shop-floor tasks where stable clamping is essential. The 50 mm height contributes to mechanical stability, and the overall 9 kg mass adds damping that helps suppress vibrations during cutting operations. Together these factors support more accurate feeds and finishes, helping to maintain tool life and process efficiency. Practical design for everyday workshop integration The Type B configuration and sturdy construction make this clamping solution straightforward to integrate into existing fixturing workflows. Manufactured by Vertex, the component follows recognised industrial standards and provides a compact footprint that is adaptable to bench-top or machine-table setups. The simple geometry supports straightforward inspection and cleaning routines, preserving the integrity of the magnetic surfaces and pole structure. Contact Metav Werkzeuge today to discuss how the Vertex magnetic clamping plate VGF-1515B can improve setup accuracy on the shop floor; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery from Emmerich Technical data SKU: VGF-1515B GTIN: 4061905085147 Manufacturer: Vertex Facts Weight: 9 kg Height: 50 mm Magnetic force: 28 Special features Fine pole distribution Type: B ECLASS: 21020809 Robust workshop construction FAQ What advantages does a fine pole distribution offer for machining? Fine pole distribution increases the number of contact points and improves grip on small or irregular workpieces, which enhances repeatability when using the magnetic clamping plate VGF-1515B. What are the key physical dimensions and mass? The magnetic clamping plate VGF-1515B has a height of 50 mm and a mass of 9 kg, providing a compact yet stable platform for clamping. How strong is the holding capability of this clamping plate? The device is specified with a magnetic force of 28, which provides dependable holding for many standard machining and grinding applications. Is the product suitable for integration in an existing machining setup? Yes; the Type B configuration and compact dimensions allow the plate to be fitted onto machine tables and benches commonly used in workshops, making it practical for retrofits and new fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1530mm Magnetic Chuck Fine Pole Distribution, 28N Holding Force, 50mm Height - Vertex
Combining a solid magnetic clamping solution, low-profile installation and reliable mass for stable machining, this unit supports consistent production flow and simple integration. Take advantage of the fine pole distribution and compact 50 mm height for precise, space-saving workholding — order directly via Metav Werkzeuge or contact our consultants for implementation advice. VGF-1530BS Magnetic Clamping Plate by Vertex — fine pole distribution, 50 mm height A VGF-1530BS magnetic clamping plate designed for precise magnetic workholding in milling, grinding and general machining contexts Fine pole distribution for precise clamping Compact 50 mm overall height High magnetic force rating 28 Robust construction, weight 18 kg Stable clamping performance that supports higher throughput The magnetic clamping plate delivers a measurable improvement in process reliability through a consistently distributed magnetic field and significant mass. The specified magnetic force rating of 28 provides strong retention during heavy cuts, while the unit’s substantial weight contributes to vibration damping and stability on the machine table. These attributes translate into fewer re-clamps and reduced cycle interruptions, supporting a smoother production rhythm and demonstrable gains in operational efficiency. Precise part location and reduced marking thanks to fine pole distribution The integrated fine pole distribution creates a more uniform magnetic surface, enabling secure holding of smaller or intricately shaped ferrous components with less concentrated contact pressure. This results in improved precision for finishing passes and lowers the risk of surface marking on sensitive parts. For setups where positioning accuracy and minimal distortion are priorities, the fine pole arrangement helps maintain tolerances and simplifies fixture planning for series production and job-shop work. Low profile design for greater machine compatibility and easy integration With a compact 50 mm height and a mass of 18 kg, the clamping plate balances a minimal vertical footprint with the mass required for rigidity. The shallow profile aids in preserving tool-to-part clearance and makes the unit suitable for machines with limited table-to-spindle distance. Built for workshop use, the design supports straightforward mechanical alignment and stable operation across diverse machining tasks while keeping the machine’s working envelope optimised for efficient toolpaths. Contact Metav Werkzeuge today for tailored advice on integrating the Vertex VGF-1530BS magnetic clamping plate into production workflows; our consultants can advise on mounting options and application suitability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VGF-1530BS GTIN: 4061905094989 Manufacturer: Vertex ECLASS: 21020809 Core data Height: 50 mm Weight: 18 kg Magnetic force: 28 Type: BS Special features Fine pole distribution Low-profile design for tight clearances Image asset available (vgf-1018b.jpg) FAQ How strong is the holding capability of this magnetic clamping plate? The Vertex VGF-1530BS is specified with a magnetic force rating of 28, offering robust retention suitable for demanding machining where consistent clamping is required. Is the fine pole distribution suitable for small or delicate workpieces? Yes. The fine pole distribution on the VGF-1530BS reduces localised pressure points and provides a more uniform field, making it well suited to smaller or more delicate ferrous components. What are the main dimensions and mass for planning machine setup? The clamping plate has an overall height of 50 mm and a mass of 18 kg, values that help when considering table clearance and fixturing stability during integration. Are there special maintenance requirements for long-term use? Routine care for the magnetic surface—regular cleaning and inspection for particulate contamination—is recommended to maintain consistent performance; the VGF-1530BS benefits from straightforward, low-effort maintenance routines. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Round Magnetic Chuck 78mm Height, 12.8kg - Vertex
Benefit from compact, consistent clamping with the 200 mm round magnetic chuck: its low-profile 78 mm height and 12.8 kg robust mass deliver stable, vibration-reducing workholding for precision machining. Order the unit directly via Metav Werkzeuge or consult our technical advisors for application guidance. Magnetic chuck VGD-08 — Round magnetic clamping plate, 200 mm diameter, Vertex A magnetic chuck VGD-08 designed for secure workpiece clamping across general machining applications, offering a compact footprint and stable holding force for accurate processing. 200 mm round diameter 78 mm compact height 12.8 kg robust construction Precision magnetic clamping Space-saving profile that steadies the machining process The round clamping plate's 200 mm diameter combined with a low profile of 78 mm reduces the distance between the workpiece and the machine spindle, improving stiffness and axis control during turning or light milling operations. The compact design limits overhang and supports better surface finish by lowering vibration transmission. The stable 12.8 kg mass contributes to dynamic damping, which is particularly relevant when short-cycle precision and repeatability are required on small to medium-sized components. Predictable magnetic hold for reliable set-ups Magnetic clamping provides a repeatable holding method without mechanical jaws, enabling quicker set-ups for flat and suitably shaped workpieces. The unit delivers a consistent magnetic clamping action, easing fixture changes and reducing overall set-up time. For operators with limited metrology expertise, the principle is straightforward: an even magnetic field equals uniform holding force across the work area, which supports precision machining and predictable tool wear. The robust construction ensures the magnetic properties remain stable under typical workshop conditions. Built for integration and workshop efficiency The round form factor suits rotary tables and smaller machine beds, allowing efficient fixturing of discs, rings and plate-like parts. Manufactured under the Vertex designation and supplied as SKU VGD-08, the clamping plate fits into established workflows where repeatability and uncomplicated handling are priorities. Its uncomplicated geometry simplifies cleaning and maintenance routines and reduces downstream inspection deviations, supporting smoother production runs and fewer reworks. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VGD-08 magnetic chuck into existing setups and to arrange swift dispatch from our Emmerich stock Technical data SKU: VGD-08 GTIN: 4061905086106 EClass: 21020809 Core technical data Diameter: 200 mm Height: 78 mm Weight: 12.8 kg Features Round design Magnetic clamping function Brand: Vertex Suitable for general machining clamping applications FAQ What is the diameter of the clamping surface? The clamping surface has a diameter of 200 mm on the Vertex magnetic chuck (VGD-08). How high is the unit and why does that matter? Height is 78 mm; the low profile reduces overhang and improves stiffness for more stable machining. What is the weight of the product and its benefit? The unit weighs 12.8 kg; the mass helps damp vibration and increases dynamic stability during processing. Can the chuck be used on rotary tables and small machine beds? Yes, the round form and compact height of the VGD-08 make it suitable for rotary tables and smaller machine beds in precision workshops. Is this product identified by a specific SKU? Yes, the chuck is supplied under SKU VGD-08 and carries GTIN 4061905086106 for traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x400mm Magnetic Chuck 50mm Height, 26 kN Holding Force - Vertex
The combination of a compact 200 x 400 mm footprint, a substantial 32 kg base and a defined 50 mm height delivers stable fixturing and reliable machining results. The measured magnetic force 26 reduces re-clamping and supports consistent throughput. Order the VG-816 directly via Metav Werkzeuge or ask our consultants if needed. VG-816 Magnetic Clamping Plate – Vertex, 200 x 400 mm, 50 mm height The VG-816 is a magnetic clamping plate designed for secure workpiece fixturing in machining and inspection applications. Compact 200 x 400 mm footprint Robust 50 mm overall height High holding power: magnetic force 26 Solid 32 kg base for stability Stable support for repeatable machining results The heavy-duty construction and defined geometry provide a stable platform for workholding, reducing vibration and improving surface finish. With a 200 x 400 mm contact area and a substantial 32 kg mass, the device increases resistance to torsion and movement during machining. The specified 50 mm overall height supports consistent tool offsets and alignment on the machine table, contributing to predictable results and fewer scrapped parts. Faster set-up and measurable process gains A uniform magnetic force 26 across the surface helps to shorten preparation times and reduces the need for mechanical clamping. This consistency enhances repeatability, so successive parts maintain the same datum and orientation without time-consuming re-adjustments. For production environments where cycle time matters, the improved hold and diminished fixturing variance translate directly into higher effective throughput and lower per-part handling time. Compact form for flexible workshop integration The modest footprint and defined height make the clamping plate simple to position on many machine tables without compromising access or visibility. The substantial mass provides inherent damping while remaining compact enough to be transferred between stations where a stable magnetic base is required. The straightforward form factor supports efficient fixture planning and quicker machine changeovers, helping operations to remain responsive to varied job demands. Predictable quality through quantifiable specifications The combination of listed dimensions, weight and magnetic force offers a clear, verifiable basis for selecting the right clamping solution for a given process. The measurable characteristics make it easier to compare alternatives and ensure the chosen device meets specific stiffness and holding requirements. This transparency supports quality assurance efforts and aids process documentation for audits or continuous improvement programmes. Contact Metav Werkzeuge in Emmerich to discuss the Vertex VG-816 magnetic clamping plate and confirm suitability for individual production requirements Technical data SKU: VG-816 GTIN: 4061905086618 eClass: 21020809 Core data Dimensions: 200 x 400 mm Height: 50 mm Weight: 32 kg Magnetic force: 26 Special features Brand: Vertex Image file: vg-407-main.jpg Category: Vertex FAQ What applications suit this magnetic clamping plate best? The VG-816 magnetic clamping plate by Vertex is suitable where stable, repeatable fixturing is required for machining and inspection tasks that benefit from magnetic holding. How are parts typically secured to the plate? Workpieces are held by the plate’s magnetic field; the VG-816 provides uniform attraction across its 200 x 400 mm area to limit the need for additional mechanical clamps. What maintenance is required to retain performance? Periodic cleaning of the plate surface and inspection for wear or contamination preserves the magnetic contact; the VG-816’s robust build reduces the frequency of maintenance interventions. Can the plate be moved between machines? The 32 kg mass of the VG-816 gives good stability while still allowing relocation between stations when required by production flow. How do the stated dimensions affect setup? The defined 200 x 400 mm footprint and 50 mm height provide repeatable offsets and predictable fixturing geometry, simplifying setup and tooling alignment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x400mm Magnetic Chuck Fine Pole Distribution, 30 N/cm² Holding Force - Vertex
The combination of a very fine pole distribution, compact working surface and substantial mass ensures secure, repeatable workholding for small to medium components and reduces set-up time on precision machines. Order the VRTW-2040A magnetic clamping plate directly via Metav Werkzeuge or ask our consultants if needed. VRTW-2040A Magnetic clamping plate — 200 x 400 mm, very fine pole distribution (Vertex) A magnetic clamping plate VRTW-2040A designed for precision workholding with a very fine pole distribution, suited to small and medium workpieces in demanding machining environments. Compact 200 x 400 mm working surface Very fine pole distribution for small parts Robust 50 mm plate profile Strong magnetic force rating 30 Secure, precise holding for fine components The combination of a very fine pole distribution and a compact working area gives consistently accurate clamping of small, geometrically complex parts. The dense pole layout reduces the unsupported surface between poles, which improves contact stability and lowers the risk of workpiece movement during milling or grinding. As a result, set-up times are shortened and scrap rates fall, delivering measurable gains in process reliability and throughput. Robust construction that supports machine performance A 50 mm plate profile and substantial plate mass contribute to vibration damping and dimensional stability during cutting operations. The unit’s magnetic force 30 rating provides a dependable holding capacity for typical small and medium workpieces without resorting to mechanical clamps, enabling unobstructed tool access and simplified fixturing. The solid construction is engineered to remain stable across repeated cycles, supporting continuous production in the toolroom or small-series manufacturing. Shop-floor integration and practical handling The plate’s 200 x 400 mm dimension makes it straightforward to fit on common machine tables while still offering usable surface area for multiple small parts or fixtures. The fine pole pattern improves versatility when repositioning components, allowing faster job changes and reducing auxiliary tooling needs. Supplied under the Vertex brand, the design focuses on predictable performance and uncomplicated handling, helping workshop teams maintain accuracy without complex adjustment routines. Contact Metav Werkzeuge to discuss the VRTW-2040A magnetic clamping plate, confirm suitability for specific tasks and arrange delivery from our Emmerich quality hub Technical Data SKU: VRTW-2040A GTIN: 4061905086595 Article: Magnetic clamping plate, Vertex Facts Dimensions: 200 x 400 mm Height: 50 mm Weight: 31 kg Magnetic force: 30 Type: A eClass: 21020809 Special features Very fine pole distribution Compact work surface for small parts Robust plate profile Vertex brand FAQ What are the plate dimensions? The plate measures 200 x 400 mm as stated for the VRTW-2040A magnetic clamping plate. How thick is the plate and how does that affect stability? The VRTW-2040A has a 50 mm plate profile; the greater thickness contributes to vibration damping and improved stability during machining. What is the holding specification of the unit? The unit is specified with a magnetic force value of 30, giving reliable holding capacity for small to medium workpieces. Is the pole layout suitable for very small components? Yes — the very fine pole distribution of this workholding plate is designed to provide secure contact for smaller, intricate parts. Who manufactures this magnetic clamping plate? The magnetic clamping plate is manufactured by Vertex and sold under the SKU VRTW-2040A. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x450mm Magnetic Chuck 50mm Height 26N Magnetic Force - Vertex
Built for secure fixation and reliable machining, the VG-818 magnetic clamping plate combines a compact 200 x 450 mm working surface, a low 50 mm profile and a mass of 36.3 kg to deliver stable holding power; order the VG-818 directly via Metav Werkzeuge or ask our consultants if needed. VG-818 Magnetic clamping plate — 200 x 450 mm, 50 mm height (Vertex) The VG-818 magnetic clamping plate is a compact magnetic chuck designed to provide firm workpiece fixation for machining and inspection tasks in limited spaces. Compact 200 x 450 mm working surface Low-profile 50 mm design for tool clearance Magnetic force rating 26 for secure clamping 36.3 kg mass for improved damping and stability Stable clamping that improves machining consistency The VG-818 delivers a predictable holding solution thanks to its defined magnetic force and substantial mass. The specified magnetic rating of 26 gives a clear indicator of the plate’s holding capability, while the 36.3 kg mass contributes to vibration damping and a steadier machining environment. Together these attributes reduce chatter and support consistent surface finishes, which is particularly important for repeatable production runs and precision rework. By converting magnetic holding data into practical expectations, operators can assess fixture suitability against machining parameters and toolpath strategies. Low profile and compact footprint for flexible setup A low-profile height of 50 mm and a working surface of 200 x 450 mm mean the clamping plate fits into constrained setups without compromising accessibility. The slim design permits closer tool approaches and improved clearance during multi-axis or near-fixture operations, while the compact footprint preserves valuable bench or machine table space. For quality control stations where access and visual inspection matter, the shallow profile aids in measuring and aligning workpieces, making the unit suitable for both small-batch production and laboratory inspection tasks. Practical integration and dependable supply chain The magnetic clamping plate is straightforward to incorporate into existing fixtures and fixturing strategies, providing a consistent reference surface for machining and measurement. Its robust construction and defined specifications support process planning and risk reduction in production. Supply and after-sales reliability stem from Metav Werkzeuge’s role as a European-quality filter: central stock and experienced distribution ensure dependable availability and clear product information for purchasing decisions. The combination of technical clarity and supply integrity supports long-term planning for workshops and industrial users alike. For precise clamping solutions from Vertex, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VG-818 GTIN: 4061905085314 eClass: 21020809 Facts Dimensions: 200 x 450 mm Height: 50 mm Weight: 36.3 kg Magnetic force: 26 Special features Magnetic clamping plate Compact format for restricted machine tables Low-profile design for improved tool clearance FAQ What are the exact dimensions and height of the clamping plate? The clamping plate measures 200 x 450 mm with a height of 50 mm, providing a compact working surface suited to small to medium fixtures. What does the magnetic force rating of 26 mean in practice? The rating of 26 indicates the plate’s holding capacity relative to other magnetic chucks; combined with the plate’s mass it yields secure fixation for typical ferrous workpieces used in machining and inspection. Is the VG-818 suitable for precision inspection tasks? Yes, the VG-818 magnetic clamping plate provides a stable reference surface and damping from its 36.3 kg mass, supporting repeatable measurements and visual inspections. How does the low-profile design benefit machining operations? The 50 mm profile allows closer tool approaches and better access around the workpiece, reducing interference and enabling setups where clearance is limited. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x450mm Magnetic Chuck Fine Pole Distribution, 30 N/cm² Holding Force - Vertex
Take advantage of the combination of robust clamping power, a very fine pole distribution and a compact 200 x 450 mm footprint for consistent, high-precision workholding; order the magnetic chuck directly via Metav Werkzeuge or consult our advisors for technical guidance. VRTW-2045A Magnetic clamping plate (Type A) by Vertex — very fine pole distribution The VRTW-2045A is a magnetic clamping plate engineered for precision holding in metalworking and general workshop applications, offering a compact format and focused clamping performance. Very fine pole distribution for small workpieces Compact footprint 200 x 450 mm 50 mm plate height for stable support Strong magnetic force rating of 30 Reliable holding for precision machining A magnetic clamping solution built around a very fine pole distribution ensures reliable contact across small or intricate components, improving positional stability during milling, grinding and light machining operations. The combination of a compact 200 x 450 mm working area and 50 mm overall height delivers a stable platform without excessive bulk, while the substantial 36 kg mass contributes to vibration damping and consistent contact. These characteristics translate into better repeatability and reduced rework, making the chuck a practical choice where process reliability and part quality are priorities. Faster set-ups and clearer process benefits Fine pole spacing reduces the need for custom mechanical fixturing, supporting quicker workpiece clamping and shorter set-up times. The chuck’s magnetic system, rated with a magnetic force of 30, is engineered to maintain secure holding for steady machining forces, which supports predictable cycle times and improved shop-floor efficiency. For operators and process planners, this equates to fewer adjustments between runs and a leaner workflow that favours throughput without compromising accuracy or surface finish. Designed for workshop integration and straightforward handling The plate’s moderate dimensions and defined height align with common machine tables and fixture layouts, allowing quick integration into existing equipment. The weight and construction are optimised to provide solidity while remaining manoeuvrable for handling on a bench or machine table. Maintenance routines are simple and largely limited to surface cleaning and inspection; the design avoids complex servicing needs and supports continuous operation in a production environment where uptime matters. Precision where it counts — engineered by a recognised brand Manufactured under the Vertex designation, the component reflects a focus on measured performance and consistent production results. The engineering emphasis is on stable clamping, repeatable positioning and a fine pole architecture that supports small-part workholding. For teams seeking to elevate machining consistency with a compact magnetic solution, this plate offers a pragmatic balance of performance and workplace convenience. Contact Metav Werkzeuge for tailored advice on integrating the VRTW-2045A into existing workflows or to request detailed technical specifications and delivery options — our consultants are ready to assist. Technical Data Article number: VRTW-2045A GTIN: 4061905085895 Type: A Core data Dimensions: 200x450 mm Height: 50 mm Weight: 36 kg Magnetic force: 30 ECLASS: 21020809 Special features Very fine pole distribution Vertex product designation VRTW-2045A Compact clamping plate format FAQ What is the recommended application for this magnetic clamping plate? The magnetic clamping plate VRTW-2045A by Vertex is designed for precision holding in machining and general workshop tasks where a fine pole distribution supports small or detailed components. How large is the working area of the clamping plate? The plate offers a working footprint of 200 x 450 mm, as specified for the VRTW-2045A magnetic chuck. What does the magnet force value of 30 indicate? The figure indicates the rated magnetic clamping strength for the unit; for precise operational parameters and load examples, Metav Werkzeuge can provide application guidance for the VRTW-2045A. Is the plate easy to install on standard machine tables? The plate’s 200 x 450 mm format and 50 mm height are intended for straightforward integration with common machine tables and fixture setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x500mm Magnetic Chuck 50mm Height 26N Holding Force - Vertex
Benefit from robust magnetic clamping, a compact 200 x 500 mm working surface and a low-profile 50 mm height that together deliver stable, repeatable workholding for medium-format components. Order the VG-820 magnetic clamping plate directly via Metav Werkzeuge or ask our consultants for suitability and delivery options. VG-820 Magnetic Clamping Plate by Vertex — 200 x 500 mm, 26 magnetic rating The VG-820 is a magnetic clamping plate engineered for secure, repeatable workholding in metalworking and toolroom applications, offering a medium-format surface and a low-profile design for easy integration. 200 x 500 mm working surface 26-rated magnetic holding force 50 mm low-profile height Robust 40.4 kg construction Secure, measurable clamping for efficient machining The VG-820 delivers reliable magnetic clamping on a compact footprint, combining a 200 x 500 mm working surface with a 26 magnetic rating to support consistent setup times and repeatable results. The measurable holding force enables planners to account for clamp capacity within machining processes, enhancing throughput by reducing the need for mechanical fixtures. Built to complement industrial workflows, the unit’s specifications support predictable performance planning and easier quality control. Stable support through low profile and mass With a 50 mm plate height and a mass of 40.4 kg, the device provides a low centre of gravity and static stability during cutting and probing operations. The plate’s weight contributes to vibration damping, which in turn helps to preserve surface finish and dimensional accuracy. For workshop technicians less familiar with magnetic systems: the combination of plate mass and magnetic rating means that the clamped workpiece is held with a balance of rigidity and serviceability, reducing rework and setup iterations. Practical integration and application scope The magnetic clamping plate is intended for fixtures where ferromagnetic workpieces require rapid clamping and unclamping. Its medium-format size suits component machining, short-series production and toolroom tasks where changeover speed is valuable. The flat work surface simplifies alignment and referencing on machine tables and measuring stations. Where non-magnetic parts are involved, mechanical fixturing or ferromagnetic subplates remain the established solution to achieve comparable clamping reliability. Durable operation and workshop fit Designed for routine industrial use, the plate features a robust construction that withstands regular loading and handling. Maintenance focuses on keeping the contact surface clean and free from swarf or coolant residues to preserve holding performance over time. As a precision partner, Metav Werkzeuge combines decades of industry experience and a broad product range to ensure that such clamping solutions arrive ready for integration; this includes support for selection, logistics and post-purchase queries, reinforcing dependable supply from Emmerich to the workshop bench. Contact Metav Werkzeuge to discuss the VG-820 magnetic clamping plate, confirm fitment for the intended application and arrange prompt supply from Emmerich—our consultants are available to advise on technical suitability and delivery options. Technical Data SKU: VG-820 GTIN: 4061905085765 eClass: 21020809 Manufacturer: Vertex Facts Dimensions: 200 x 500 mm Height: 50 mm Weight: 40.4 kg Magnetic force: 26 Special features Medium-format magnetic clamping surface Low-profile design for machine table integration Robust construction for stable machining FAQ Is the VG-820 suitable for non-magnetic materials? The VG-820 magnetic clamping plate is designed for ferromagnetic workpieces; non-magnetic materials require additional fixturing or a ferromagnetic subplate to achieve magnetic clamping. What are the exact working dimensions and profile? The clamping surface measures 200 x 500 mm with a plate height of 50 mm; the unit’s mass is 40.4 kg, which contributes to stable workholding. How is the holding strength specified? Holding performance is indicated by the magnetic rating of 26; this value is used to assess the plate’s capacity for secure, repeatable clamping within machining processes. Can the plate be used directly on standard machine tables? The plate’s flat base and low profile support integration on standard machine tables, provided appropriate mounting and safety procedures are observed for the machine and workpiece. What routine maintenance is required? Regular cleaning of the contact surface and protection against corrosion are the primary maintenance tasks to sustain consistent holding performance over time. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x600mm Magnetic Chuck 50mm Height, 26 kN Holding Force - Vertex
Benefit from reliable magnetic clamping, a compact 200 x 600 mm working surface and a low 50 mm profile for stable set-ups; ideal for precise fixturing under repetitive machining conditions. Order the VG-824 magnetic clamping plate directly via Metav Werkzeuge or ask our consultants if needed. VG-824 Magnetic clamping plate by Vertex — 200 x 600 mm, 26 holding force VG-824 Magnetic clamping plate is a precision clamping solution for workshop and light production environments, designed to secure ferrous workpieces for milling, grinding and inspection tasks. Low-profile 50 mm design for close-fixture work Stable 200 x 600 mm working surface High magnetic holding force 26 Consistent clamping for repeatable accuracy The VG-824 offers stable magnetic clamping, delivering reproducible fixture positions that reduce setup variability and rework. The plate’s 200 x 600 mm surface provides a practical balance between usable area and machine table clearance, enabling multiple small components to be held simultaneously or a single medium-sized workpiece with consistent contact. At a mass of 48 kg, the unit resists vibration and movement during machining, improving dimensional stability. For production runs that demand repeatability, the magnetic action shortens cycle times and minimises manual clamping steps, contributing directly to higher throughput. Practical benefits for workshop workflow With a slim 50 mm profile, the clamping plate permits close proximity between workpiece and tool, which is advantageous for low-clearance milling and finishing tasks. The magnetic holding force of 26 ensures secure retention of ferrous materials during moderate cutting loads while simplifying part loading and unloading compared with mechanical vises. The robust construction supports straightforward cleaning and maintenance, reducing downtime. Integration into standard machine tables is straightforward thanks to the plate’s format and weight, allowing reliable positioning without extensive adaptation. Designed for efficient integration and safe operation The plate is suited to daily use in toolrooms and small-batch production where dependable magnetic fixturing improves operator efficiency and machining quality. The compact footprint keeps the machine table accessible for additional clamping accessories when required, and the uniform surface promotes even magnetic distribution for better workpiece support. Specifications such as dimensions: 200 x 600 mm and a low overall height are chosen to aid ergonomic handling and to reduce interference with toolpaths, supporting both single-piece flow and batch processing in mixed-production environments. Select the Vertex VG-824 magnetic clamping plate for controlled, repeatable workholding — contact Metav Werkzeuge in Emmerich for purchasing guidance or to discuss application fit with our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VG-824 GTIN: 4061905095429 Eclass: 21020809 Facts Dimensions: 200 x 600 mm Height: 50 mm Weight: 48 kg Magnetic holding force: 26 Special features Brand: Vertex Product type: Magnetic clamping plate Suitable for ferrous workpieces FAQ What is the working surface of the clamping plate? The working surface measures 200 x 600 mm, providing a versatile area for medium and multiple small components held by the VG-824 magnetic clamping plate. How much does the unit weigh and why is that important? The plate weighs 48 kg; this mass increases stability during machining and reduces susceptibility to table vibration for improved machining accuracy. What does the magnetic holding force of 26 mean in practice? The holding force value of 26 indicates a strong magnetic retention suitable for secure fixturing of ferrous materials during milling and finishing operations with the VG-824. Is the product suitable for close-clearance machining? Yes. The 50 mm low-profile design supports close-clearance toolpaths and enables tight setups that are often required for finishing and precision work. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure accurate machining with magnetic workholding systems
magnetic workholding systems, often referred to as magnetic chucks or magnetic plates, provide a reliable method for fixing workpieces during precision machining. These systems secure ferrous components for operations on milling, grinding and EDM machines and are available with either mechanical activation or electromagnetic control. Consistent clamping and quick changeover make them a practical choice for modern workshops.
How the systems work and where they are essential
In practice, a magnetic chuck creates a holding field across the workpiece surface so that machining forces are absorbed without conventional mechanical clamping. Activation is either manual (mechanical) or switchable (electromagnetic), allowing for safe loading and repeated positioning. The strength of the magnet is expressed as magnetic flux density in Gauss, while the practical holding capability is stated in kgf (kilogram-force), giving objective, comparable values for setup planning.
Measurable benefits that speed up production
- Reduced setup time through instant holding and straightforward activation methods.
- Improved repeatability, supporting tighter tolerances and fewer reworks.
- Versatile machine compatibility with milling, grinding and EDM applications.
- Quantifiable holding performance via Gauss and kgf specifications for process planning.
- Safer handling when using electromagnetic activation for secure on/off control.
Metav as the partner for dependable workholding solutions
Metav combines deep specialist know-how with a broad, quality-controlled range, making it the pragmatic choice for procurement. From Emmerich, Metav operates as a quality filter for the european market, supplying over 250,000 products and trusted by more than 48,000 customers. This scale reduces supplier count for workshops while ensuring steady availability and reliable logistics from our site in Emmerich am Rhein.
Technical data — key measures and applications
- Suitable for milling, grinding and EDM
- Activation: mechanical or electromagnetic
- Holding strength indicated in kgf
- Magnetic strength indicated in Gauss
- Designed for secure clamping of ferrous workpieces
FAQ
What types of operations are magnetic workholding systems suitable for?
magnetic workholding systems are suitable for milling, grinding and EDM operations where a flat, secure contact area can be established between chuck and workpiece.
How is the holding force specified and compared?
Holding force for magnetic chucks is typically given in kgf, while the magnetic field intensity is stated in Gauss; both values allow objective comparison between systems.
Can I switch the magnetic effect on and off during loading?
Yes. Magnetic workholding systems are available with mechanical activation or electromagnetic switching, enabling safe loading and rapid activation when required.
Why choose Metav for magnetic chucks?
Metav offers a broad, quality-checked selection and consistent supply from Emmerich, backed by decades of specialist experience and a large, satisfied customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com