Reliable magnetic stands for precise positioning
Magnetic stands provide a stable base for holding measuring instruments and workpieces, delivering repeatable positioning and enabling accurate inspection and setup operations. These systems are used to secure dial indicators, feeler-lever gauges and other measuring devices to machine beds or fixtures, offering flexibility through adjustable arms and swivel joints for exact alignment. Available variants include switchable magnetic base, flexible arm stand and mini magnetic stand, each designed to support different holding forces and practical applications in metalworking. Robust magnetic blocks and prism feet allow mounting on shafts and large parts, ensuring reliable clamping during measurement and setup.
100 kg Magnetic Base With On/Off Switch, Prism Foot, M8 Thread - Metav IndustryLine
Benefit from a compact magnetic base that pairs a 100 kg nominal holding force with an integrated on/off switch and an M8 mounting thread for fast, repeatable fixturing; order directly via Metav Werkzeuge or speak with our consultants for application advice. Magnetic Base 100 kg/M8 with On/Off Switch (Metav IndustryLine) A robust magnetic base designed to secure indicators and fixtures on ferrous surfaces, offering 100 kg nominal holding force and an M8 mounting thread for versatile workshop use. *100 kg nominal holding force *Integrated on/off switch *M8 mounting thread, compact 73 x 50 x 55 mm Secure holding that improves measuring reliability The magnetic base delivers a 100 kg holding force, providing a stable platform for inspection and measurement tasks where repeatability matters. The strong magnetic performance reduces micro-movement under load, which means gauges and indicators remain steady during probing or machining checks. Built for workshop and inspection benches, the unit’s compact footprint (73 x 50 x 55 mm) allows precise placement in confined set-ups while the moderate weight of 1.15 kg keeps handling straightforward. By relying on consistent clamping strength, setup times are shortened and rework from slippage is reduced, supporting efficient quality-control workflows. Safer, faster operation with integrated control and prism foot An integrated on/off switch simplifies engagement of the magnetic circuit and minimises the need for manual repositioning when changing parts or instruments. The prism-style base ensures secure contact on round or irregular ferrous surfaces, improving stability for shaft or tube-mounted checks. The M8 threaded connection permits direct mounting of support posts and holders without adaptors, reducing component count and set-up complexity. These design choices combine to offer a pragmatic balance of safety and operational speed, enabling technicians to focus on measurement tasks rather than fixturing. Compact design for flexible workshop applications The low-profile construction and standard thread make this magnetic base a flexible addition to any inspection kit or magnetic stand assembly. The unit is useful in metalworking shops, toolrooms and inspection labs where reliable repeatable positioning of dial indicators or test probes is required. Corrosion-resistant materials and a robust magnet assembly ensure long service life under normal workshop conditions. Compatibility with common magnetic stand components and simple mechanical mounting mean the base integrates smoothly into existing jigs and benches, increasing the utility of existing equipment without extensive modification. For secure, repeatable fixturing choose the Metav IndustryLine magnetic base and contact Metav Werkzeuge for tailored advice or to arrange supply direct from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M208.102.1 GTIN: 4054469104522 Dimensions: 73 x 50 x 55 mm Weight: 1.15 kg Thread: M8 Nominal holding force: 100 kg Facts Holding force: 100 kg Weight: 1.15 kg Dimensions (L x W x H): 73 x 50 x 55 mm Thread size: M8 HS Tariff number: 90319000 Special features Integrated on/off switch Prism-style base for round surfaces Compact, low-profile construction Suitable for magnetic stands and indicator mounting FAQ What holding capacity does the magnetic base provide? The magnetic base offers a nominal holding force of 100 kg, providing secure clamping for indicator and fixture applications. Which mounting thread is fitted to the base? The device features an M8 mounting thread for direct attachment of posts and accessory fittings. Is the base suitable for use on cylindrical surfaces? Yes, the prism-style foot is designed to improve contact and stability on round or irregular ferrous surfaces. How heavy is the magnetic base and is it easy to handle? The unit weighs 1.15 kg, combining a compact form factor with convenient portability for workshop use. Can this base be mounted on existing magnetic stands? The standard M8 thread and compact dimensions allow integration with common magnetic stand components and indicator holders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Dial Holder For Magnetic Stand 80x8 mm, For Test Indicator Attachment - Metav IndustryLine
Take advantage of a compact, lightweight holder that accepts an 8 mm stem and gives secure fixation on a magnetic stand; the result is fast, repeatable indicator positioning with minimal setup time. Order the holder directly via Metav Werkzeuge or ask our consultants for compatibility advice. Dial gauge holder M402.014 – Indicator mount for magnetic stand, 8 mm stem, 80 mm reach (Metav IndustryLine) Dial gauge holder M402.014 for mounting feeler‑lever measuring devices on a magnetic stand; compact accessory for precise indicator positioning in workshop and inspection setups Compact 80 mm reach for tight spaces Accepts 8 mm stem for common indicators Lightweight 50 g for easy handling Designed as an accessory for magnetic stands Secure, repeatable positioning for precision inspection The dial gauge holder provides a stable clamping point for a range of lever‑type indicators and small dial gauges, enabling repeatable positioning during inspection and setup tasks. By accepting an 8 mm stem, the mount fits standard indicator shanks used across metrology benches and machines; this compatibility reduces the need for adaptors and speeds tool changes. The robust clamping principle ensures the gauge remains fixed under light contact forces, improving measurement reliability and reducing rework in production environments. Small footprint, quick alignment on crowded benches With an 80 mm reach and a lightweight 50 g construction, this holder is tailored to confined setups where space and accessibility matter. Its compact dimensions make it straightforward to manoeuvre the indicator into the required plane without interfering with adjacent tooling or workpieces. The reduced mass shortens the time needed to reposition the gauge and limits added inertia on the magnetic stand, which benefits technicians who perform frequent, short measurement cycles and demand efficiency. Designed for magnetic stands and lever‑type gauges As an accessory for magnetic stands, the mount integrates into existing inspection rigs to provide a dependable interface between the stand and the gauge. It is explicitly suitable for mounting a feeler‑lever measuring device, offering a clear function for repeat checks, comparative measurements and alignment tasks in machinery maintenance and quality control. The simple, purpose‑built design helps standardise setups across multiple workstations and supports consistent measurement routines in workshop and inspection departments. Contact Metav Werkzeuge in Emmerich to confirm fit and compatibility for specific indicators or applications; our consultants are available to advise on integrating the M402.014 into existing magnetic‑stand setups. Technical data Article number: M402.014 GTIN: 4054469143804 ECLASS: 21029090 Tariff number: 90178090 Numbers / core technical data Weight: 0.05 kg Length / reach: 80 mm Stem acceptance: 8 mm Special features / suitability Accessory for magnetic stands (magnetic stand category) Suitable for mounting a feeler‑lever measuring device on a magnetic stand Category path: Messgeräte > Magnetstative FAQ What stem diameter does the holder accept? The holder accepts an 8 mm stem, making it compatible with standard dial and lever‑type indicator shanks. Is the mount suitable for use on magnetic stands? Yes, the product is designed as an accessory for magnetic stands and integrates with common workshop stands for fixed indicator positioning. What is the reach or effective length of the holder? The holder provides an 80 mm reach, intended for use in compact setups where close‑range indicator positioning is required. How heavy is the mount and does it affect stand stability? Weighing 0.05 kg, the mount is lightweight and minimises additional load on the magnetic stand while allowing precise alignment. Which applications are typical for this indicator holder? Typical uses include comparative checks, alignment tasks and fixture set‑up where a feeler‑lever measuring device or similar indicator must be securely positioned. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Extension Rod Ø16 mm M8 Thread Magnet Stand Accessory - Metav IndustryLine
Take advantage of a compact, standards‑compatible accessory that increases reach while keeping setups stable: the 100 mm length and Ø16 mm shank with an M8 threaded connection deliver precise, repeatable positioning for magnetic holders and dial indicators. Order directly via Metav Werkzeuge or consult our technical advisors for compatibility details. Extension for Magnetic Stand M208.104.V1 — 100 mm length, Ø16 mm shank, M8 thread (Metav IndustryLine) The Extension for Magnetic Stand, 100 mm is a purpose‑built spacer that extends the reach of magnetic bases and measuring stands, enabling secure mounting of indicators and probes in confined or elevated positions. 100 mm extension length 16 mm diameter shaft M8 threaded connection Greater reach with controlled stability The compact rod provides an additional 100 mm of reach while maintaining a slim Ø16 mm profile that minimises obstruction in dense setups. By adding this spacer between a magnetic base and an indicator, a fixed inspection point can be reached without repeated reclamping, which reduces setup time and the risk of cumulative alignment errors. The result is a more efficient measuring routine and improved reproducibility for routine checks and workshop tasks. Straightforward, standardised compatibility Threaded to metric M8 standards, the extension fits any magnetic stand or holder with an M8 female thread, simplifying integration into existing metrology kits. The metric thread is a common workshop standard, so the component mounts directly and reliably; the part weighs 0.15 kg which keeps the added mass low and avoids undue loading of the magnetic base. This makes the accessory particularly useful for measuring setups where a balance of reach and rigidity is required. Practical benefits for everyday measuring workflows As a small, purpose‑designed accessory, the rod reduces the need for improvised fixtures and speeds up repetitive tasks: operators gain a consistent reference point and maintenance of alignment becomes easier. The simple mechanical concept translates into tangible time savings and fewer measurement interruptions. Backed by the Metav approach to accessible precision, this accessory supports dependable workmanship in both production and inspection environments. For product enquiries or to specify the Metav IndustryLine 100 mm extension with M8 thread for a particular measuring stand, contact Metav Werkzeuge for tailored advice and reliable supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M208.104.V1 GTIN: 4054469159430 ECLASS: 21170613 ETIM: EC002219 Category: Measuring instruments / Accessories Core dimensions & weights Length: 100 mm Shank diameter: Ø16 mm Thread: M8 Weight: 0.15 kg Tariff number: 90319000 Compatibility & features Suitable for all stands with M8 thread Intended use: extension for magnetic bases and measuring stands Label: Extension for Magnetic Stand, 100 mm length, D = 16 mm, thread M8 FAQ What is the primary purpose of this extension? The Extension for Magnetic Stand, 100 mm increases the reach of a magnetic base or holder to position dial indicators or probes at otherwise inaccessible points, improving setup flexibility and repeatability. Which magnetic stands will accept this extension? Any magnetic stand or holder with an M8 female thread will accept the extension; the M8 thread is a standard metric connection used across common measurement stands. What are the exact dimensions and mass of the part? The component measures 100 mm in length, has a Ø16 mm shank, an M8 thread and weighs 0.15 kg, making it a compact, lightweight spacer for metrology setups. Can the extension be used with dial indicators and electronic probes? Yes, the extension is suitable for mounting dial indicators and probes on magnetic bases, provided the instrument or its holder interfaces with an M8 threaded socket. Is the thread metric and ready for direct mounting? The thread is a standard metric M8, so the part can be mounted directly into compatible female M8 threads without adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100kg M10 Magnetic Base With On/Off Switch And V-Base - Metav IndustryLine
Benefit from the 100 kg nominal holding force combined with an M10 threaded interface and an integrated on/off magnetic switch for fast, safe repositioning of measurement equipment; order the magnet base directly via Metav Werkzeuge or consult the team for application advice. Magnet Base 100 kg M10 with On/Off Switch – Magnetic mounting base for measurement stands (Metav IndustryLine) The Magnet Base 100 kg M10 with On/Off Switch is a compact magnetic holder designed for secure attachment of dial indicators and measurement fixtures to ferrous surfaces, enabling repeatable set-up in inspection and workshop environments. 100 kg nominal holding force M10 threaded mounting interface Integrated on/off magnetic switch Prism foot for reliable contact Secure holding power for consistent measurement results The magnetic holder provides a nominal holding force of 100 kg, which translates into markedly improved stability when fixing measurement posts or small fixtures to machine beds and steel plates. The high holding force reduces the risk of slippage during fine adjustments, supporting repeatable setups and minimising the need for frequent re-alignment. The integrated on/off mechanism simplifies safe engagement and disengagement of the magnetic circuit, allowing rapid repositioning without tools and reducing setup time in production or quality‑control routines. Versatile mounting and precise contact geometry An M10 threaded interface offers compatibility with common indicator stems and articulating arms found in many workshop stands, while the prism foot ensures secure contact on cylindrical or curved components by improving contact area and grip. The thread standard and prism geometry make this base suitable as a modular mounting component in existing measurement rigs, so that indicator alignment is both mechanically stable and straightforward to adjust. The design concentrates on functional fit rather than decorative elements, prioritising utility for machinists and inspection technicians. Compact build for efficient workshop handling With a compact footprint and a body weight of 1.4 kg, the magnetic base balances portability with the stiffness required for reliable measurement. The modest mass supports easy handling by a single operator while still delivering robust magnetic performance on ferrous substrates. The base is intended for workshop and inspection use where quick, repeatable mounting of gauges and fixtures increases throughput; its compact dimensions suit bench and on‑machine applications without excessive encumbrance. Contact Metav Werkzeuge for tailored advice on integrating the Magnet Base M208.103.1 into workshop measurement systems or to request further technical details from our Emmerich quality centre. Technical data Article number: M208.103.1 GTIN: 4054469104546 eCl@ss: 21170601 Category: Magnetstative Facts Nominal holding force: 100 kg Thread: M10 Weight: 1.4 kg Dimensions: 73 x 50 x 55 mm Tariff number: 90319000 Special features Integrated on/off magnetic switch Prism foot for cylindrical contact Intended for use with magnetic stands and indicator posts Compact workshop design FAQ What holding capacity does the magnetic base offer? The Magnet Base 100 kg M10 with On/Off Switch provides a nominal holding force of 100 kg, specified for firm attachment to ferrous surfaces. Which mounting thread is provided for attaching indicator stems? The magnetic holder uses an M10 threaded interface, compatible with standard indicator stems and many articulating arms. Is the prism foot suitable for curved workpieces? Yes, the prism foot improves contact on cylindrical or curved components and enhances stability during measurements. What are the dimensions and weight of the unit? The magnetic base measures 73 x 50 x 55 mm and weighs 1.4 kg, making it compact yet substantial enough for stable positioning. Can this product be used on machine beds and inspection fixtures? The base is designed for workshop and inspection environments and is suitable for securing measurement posts and fixtures to machine beds and steel plates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
105mm Small Magnetic Indicator Stand Central Clamp, Permanent Base 10 kg - Metav IndustryLine
Take advantage of a compact, 10 kg holding capacity and a central force clamp to secure fine measurement probes reliably; order directly via Metav Werkzeuge or consult the specialists for application advice. Magnet-Messstativ M208.111.1 — Small magnetic stand with central force clamp, 10 kg permanent base (Metav IndustryLine) The Magnet-Messstativ M208.111.1 is a compact magnetic measurement stand designed for stable positioning of dial test indicators and fine probes in workshop and inspection environments Compact magnetic stand with small footprint Central force clamp for axial locking 10 kg magnetic holding capacity Suitable for dovetail-mounted indicators Stable support that reduces measurement variability The magnetic base delivers a consistently strong hold, with a rated 10 kg magnetic force that secures the stand to ferrous surfaces and minimises slippage during inspection. Coupled with the central force clamp, the clamping action converts operator rotation into a uniform axial lock, which reduces torque-induced displacement and improves repeatability. Built for precision tasks, this configuration keeps the probe steady so that readings remain stable even during fine adjustments, supporting faster and more reliable quality checks. Small footprint and fast setup for busy benches A deliberately compact construction and low mass (approx. 0.25 kg) make the instrument easy to position and reconfigure across multiple machines and measuring stations. The base accepts an Ø35x35, M4 mounting interface, enabling straightforward attachment to stands, posts or ancillary fixtures. Compatibility with dovetail-mounted indicators ensures that standard dial test indicators and fine contact probes can be deployed without additional adapters, reducing setup time and simplifying routine inspection workflows in production and maintenance. Universal utility across workshop inspection tasks Classified as a universal magnetic stand, the unit is suitable for a wide range of measurement and clamping applications where a reliable reference is required. The permanent magnetic base provides maintenance-free holding compared with electromagnet solutions, while the robust clamp mechanism delivers secure locking without complex adjustments. This combination supports repeatable inspection of components and rapid transfer between jobs, making the item a pragmatic choice for machine shops, toolrooms and inspection benches that need efficient, dependable positioning. Contact Metav Werkzeuge in Emmerich for tailored advice or to reserve the compact magnetic stand M208.111.1; local stock and expert guidance are available by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M208.111.1 GTIN: 4054469159461 eClass: 21170601 Manufacturer: Metav IndustryLine Facts Magnetic force: 10 kg Weight: 0.25 kg Foot: Ø35x35, M4 Tariff number: 90319000 Special features Permanent magnetic base Central force clamp Universal application Suitable for dial test indicators with dovetail mounting Category: Magnet stands FAQ What holding capacity does the magnetic stand provide? The magnetic stand offers a holding force of 10 kg, giving reliable fixation for typical inspection setups with dial indicators and small probes. Is the clamping mechanism suitable for delicate probes? Yes, the central force clamp provides axial locking with uniform pressure, which helps protect delicate fine probes and maintains stable positioning. Which indicators are compatible with the stand? Compatibility is provided for indicators and probes using a dovetail mounting; this allows common dial test indicators to be mounted directly. What is the mounting interface on the base? The base features an Ø35x35 mounting interface with an M4 thread, enabling straightforward attachment to posts and fixtures. Is the magnetic base permanent or switchable? The base is a permanent magnetic type, offering maintenance-free holding without the need for a power source. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
128 mm Magnetic Stand Central Clamp With Lamellar Magnetic Base, Max Height 15mm - Metav IndustryLine
Take advantage of a compact, workshop‑ready holder that combines a lamellar magnetic base with a firm central clamping system and an easily adjustable rod for repeatable instrument positioning — ideal for inspection benches and mobile measuring tasks. Order the magnetic stand directly via Metav Werkzeuge or ask our consultants for specification support. Magnetic stand with central clamp and lamellar magnetic base – compact 128 mm rod, 60 magnet force (Metav IndustryLine) The Magnetic stand with central clamp and lamellar magnetic base provides rapid, secure mounting of dial indicators and small measuring instruments on ferrous workpieces and machine beds for inspection and setup tasks. Lamellar magnetic base for uneven surfaces Central clamp for quick, rigid fixation Compact 128 mm rod for tight setups Maximum adjustable height 15 mm Secure holding on rough and curved surfaces The lamellar magnetic base is designed to increase contact on irregular or slightly curved ferrous surfaces, improving grip where flat magnets would slip. Combined with the central clamping mechanism, the construction converts magnetic adhesion into a rigid mounting platform that reduces micro‑movement during readings. The base dimensions (75 × 47 × 54 mm) and the rated magnet force: 60 deliver a reliable static hold while the low overall footprint keeps the set‑up unobtrusive on crowded benches. This technical arrangement shortens set‑up time and supports consistent measurement results — an efficiency improvement for repetitive inspection routines. Compact geometry for confined set‑ups and universal mounting A short stem length and compact geometry make this holder suitable where space is limited. The rod measures 128 mm, the overall height is 347 mm, and the unit weighs 2 kg, which together produce a stable yet portable solution for bench and on‑machine use. An M8 threaded interface on the foot enables direct attachment of indicator stems and accessory adaptors commonly used in workshop practice, granting broad compatibility without additional adapters. A maximum adjustable height of 15 mm allows fine levelling of the instrument tip relative to the workpiece, enabling precise contact adjustments without changing the base position. Dependable design for everyday inspection work Engineered for frequent use, the construction emphasises repeatability and straightforward operation. Central clamping secures attachments with minimal lateral play, while the lamellar magnet reduces the need for perfect surface preparation — practical for typical machine‑shop or maintenance environments. Backed by Metav’s focus on accessible precision and dependable supply, this magnetic stand supports process reliability and helps standardise small‑part inspection across multiple workstations. Contact Metav Werkzeuge for ordering and specification matching to ensure the magnetic stand fits the intended inspection routine and mounting requirements Technical Data SKU: M208.118.2 GTIN: 4054469181561 Label: Magnetstativ mit Zentralklemmung und Lamellen-Magnetfuß Gestänge 128 mm Manufacturer: Metav IndustryLine Facts Weight: 2 kg Overall height: 347 mm Rod length (arm): 128 x 105 x 46 mm Foot dimensions: 75 x 47 x 54 mm Thread: M8 Magnet force: 60 Special features Lamellar magnetic base for improved contact on uneven ferrous surfaces Central clamping for rigid fixation of indicators and small tools Maximum adjustable height 15 mm Compact design for confined bench and on‑machine mounting FAQ What types of surfaces will the lamellar magnet adhere to best? The lamellar magnetic base of the magnetic stand adheres best to ferrous surfaces, including slightly uneven or curved machine beds and workpieces, providing improved contact where flat magnets may lose grip. Can the stand accept standard dial indicators and stems? Yes, the central clamp and M8 threaded connection allow mounting of standard dial indicators and indicator stems; the magnetic stand (SKU M208.118.2) is configured for common workshop indicator fittings. How much fine adjustment is possible once the instrument is clamped? The device offers a maximum adjustable height of 15 mm for fine levelling after clamping, enabling precise tip alignment without repositioning the base. Is the unit suitable for mobile inspection tasks? With a compact rod length of 128 mm and a weight of 2 kg, the magnetic stand is easily moved between benches and machines while still providing stable holding force for routine inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
133mm Magnetic Indicator Stand 10kg Central Force Clamp Permanent Base, Universal - Metav IndustryLine
Small and stable: the compact stand pairs a 10 kg permanent magnet base with a central force clamp and a 133 mm profile to deliver reliable, repeatable positioning for workshop metrology. Order the unit directly via Metav Werkzeuge or consult their specialists for advice on integrating the stand into existing inspection setups. Magnetic Indicator Stand M208.111 — 10 kg permanent base, 133 mm compact profile (Metav IndustryLine) The Magnetic Indicator Stand M208.111 is a compact metrology support for securing fine probes and dial indicators, combining a permanent magnet base with a central force clamp for secure, vibration‑resistant positioning in tight workspaces Compact 133 mm height for tight setups 10 kg permanent holding force Central force clamp for secure locking Ø35 mm foot with M4 mounting thread Stable positioning for repeatable measurements The principal benefit of this compact metrology support is its consistent clamping performance: a 10 kg holding force from the permanent magnet base keeps the stand locked to ferrous surfaces without the need for continuous manual pressure. The central force clamp concentrates the clamping action into a single, controllable movement, which reduces micro‑shifts during fine measurements and therefore improves repeatability. For workshop and quality‑control tasks this translates into fewer re‑measures and a steadier inspection flow, particularly when used with sensitive dial gauges or test probes requiring low lateral movement. Compact design that fits tight workspaces With an overall height of 133 mm and a compact footprint, this magnetic support is designed for confined measurement stations and machine tables where full‑size stands would obstruct access. The small mass and low profile make setup and repositioning straightforward while still offering the rigidity typically expected from larger supports. The lightweight construction does not compromise stability thanks to the strong permanent magnet base, making it a practical choice when space optimization and reliable support are required in assembly jigs, inspection benches or lathe setups. Versatile mounting and probe compatibility The stand is supplied with a Ø35 x 30 mm foot and an M4 mounting thread to accommodate common adaptors and fixtures found in metrology kits. It is specifically suited for fine probes with dovetail guidance, providing secure mechanical engagement for these probe types. The compact clamping mechanism permits quick attachment and release, enabling efficient tool changes and probe alignment. As a universal accessory in measurement equipment ranges, the stand is suitable for inspection, setup and comparative measurement tasks across general workshop and machine‑shop environments. Speak with Metav Werkzeuge for a tailored quotation and delivery options for the Metav IndustryLine magnetic indicator stand M208.111, or request integration advice from their technical consultants Technical data Article number: M208.111 GTIN: 4054469104799 ECLASS: 21170601 Numbers / Core Technical Data Holding force: 10 kg Overall height: 133 mm Weight: 0.35 kg Foot: Ø35 x 30 mm, M4 thread Special features Permanent magnet base Central force clamp Suitable for fine probes with dovetail guidance Universal application Category: Magnetic stands FAQ What holding force does the magnetic indicator stand provide? The Magnetic Indicator Stand M208.111 provides a 10 kg holding force from its permanent magnet base. Is the magnet permanent or switchable? The stand uses a permanent magnet base, which gives reliable holding without a switching mechanism. Which probes and indicators are compatible with this stand? This stand is suitable for fine probes with dovetail guidance and standard dial indicators that can be mounted via the Ø35 mm foot and M4 thread. What are the dimensions and weight of the stand? Overall height is 133 mm and the weight is 0.35 kg, making it compact and easy to position in confined inspection areas. How does the central force clamp benefit measurement tasks? The central force clamp concentrates clamping action into one movement, reducing micro‑shifts and improving repeatability during precision measurements with sensitive gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Magnetic Indicator Stand With 135mm Cross Arm, 30kg Permanent Base - Metav IndustryLine
Compact magnetic mounting with 30 kg holding capacity and a low 140 mm profile supports reliable indicator work; combine this stability with the permanent magnetic base and adjustable cross arm for consistent measurement set-ups. Order the item directly via Metav Werkzeuge or ask our consultants for application advice. Magnet-Messstativ M208.111.2 – small magnetic stand, 30 kg holding force, 140 mm height (Metav IndustryLine) A compact Magnet-Messstativ M208.111.2 designed to secure dial gauges or test indicators with a dovetail guide; the permanent magnetic base and slim column make it ideal for confined benches and machine-side inspections Compact 140 mm overall height 30 kg magnetic holding force Permanent magnetic base Ø40×30 mm Stable mounting for accurate, repeatable readings The small magnetic stand delivers a stable measuring platform by combining a sturdy permanent magnetic base with a compact column and cross arm. The result is reduced micro‑movement during readings and fewer re‑set operations on the shop floor. Thanks to the dovetail-compatible top, dial gauges and test indicators with a dovetail guide are held securely, which simplifies setup and limits indicator deflection. This dependable clamping reduces measurement variation and speeds up routine quality checks without relying on heavy or cumbersome fixtures. Space-saving design that retains rigidity and accessibility With an overall height of 140 mm and a lightweight construction of 0.5 kg, the stand offers a small footprint while maintaining the rigidity required for repeatable measurements. The base dimensions and arm geometry—including a cross arm and column engineered for minimal flex—allow close placement to workpieces and access to tight machine areas. The compact form factor speeds alignment and repositioning tasks, lowering setup times in production environments where bench space and quick changeovers are valuable. The configuration supports efficient workflows and consistent results. Universal application across inspection and workshop tasks As a universal magnetic stand, this model suits general workshop measuring, machine inspection, and bench‑level quality control. The permanent magnetic base provides trustworthy holding force for magnetic surfaces, and the combination of column and cross arm sizes supports versatile indicator positions. For operations that require frequent indicator changes or multiple measuring points, the stand offers a practical balance between manoeuvrability and stability. The reliable mechanical function, paired with a straightforward mounting interface, makes it suitable for both experienced operators and those new to workshop metrology. For dependable workshop mounting choose the Metav IndustryLine magnetic stand and contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M208.111.2 GTIN: 4054469159478 Tariff number: 90319000 Facts Overall height: 140 mm Weight: 0.5 kg Magnet strength: 24 Holding capacity (label): 30 kg Special features Permanent magnetic base Foot: Ø40×35, M6 Foot plate / permanent foot: 40 × 30 mm Cross arm: Ø8×135 Column: Ø8×105, M4 Suitable for dial gauge or test indicator with dovetail guide Universal application FAQ What holding force does the magnetic stand provide? The magnetic stand offers a labelled holding capacity of 30 kg and a listed magnet strength value of 24; this ensures secure placement on ferrous surfaces during inspection tasks. Is the magnetic base permanent or switchable? The base is a permanent magnetic base, designed for continuous holding force without a switch mechanism. Which indicators are compatible with the stand? Dial gauges or test indicators with a dovetail guide fit the top mounting; the stand is intended for standard dovetail‑type indicator interfaces. How compact is the stand for machine‑side work? With an overall height of 140 mm and a slim profile, the stand is compact enough for machine‑side measurements and tight bench spaces while still providing stable support. Is this stand suitable for repeated on‑machine inspections? Yes; the combination of permanent magnetic base and adjustable arm geometry allows for quick repositioning and reliable readings across repeated inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
145mm Small Magnetic Stand With 8mm Universal Shank And Central Force Clamp - Metav IndustryLine
Compact dimensions, a central‑force clamp and compatibility with standard 8 mm shank indicators make this stand a practical choice for tight workspaces and repeatable measurement setups; order the small indicator stand directly via Metav Werkzeuge or consult our specialists for tailored advice. Small magnetic indicator stand, 145 mm, 8 mm holder with central‑force clamp (M208.112.S) — Metav IndustryLine The Small magnetic indicator stand, 145 mm, 8 mm holder with central‑force clamp is a compact magnetic post for dial indicators and measuring probes, designed for workshop inspection and precision set‑ups in confined spaces. Compact 145 mm stand for confined spaces Central‑force clamping for secure holding 8 mm cylindrical rod holder Magnetic base with 185 mm overall height Stable repeatability from compact engineering The small magnetic post delivers reliable holding power in a space‑saving package. Thanks to the central‑force clamp, the holding force is applied evenly around the shank, reducing slippage and angular movement during measurement. This results in repeatable readings when working with dial indicators that use an 8 mm shank or a dovetail mount. The balanced design minimises operator‑induced variation and supports efficient gauge checks on production or inspection benches. Designed for tight workplaces and quick set‑ups A compact footprint and lightweight construction make the stand particularly suitable where bench space is limited. The 40 x Ø8 mm receiver accommodates cylindrical indicator stems while the measured 185 mm overall height keeps the centre of gravity low for improved stability. These attributes combine to shorten set‑up time and increase throughput in small‑batch or toolroom environments, providing a tangible increase in daily efficiency without sacrificing measurement quality. Compatibility and universal application The instrument is specified for use with common dial indicators featuring an 8 mm shank or dovetail mount, enabling broad compatibility across legacy and modern gauges. The universal character of the design supports simple integration into existing inspection routines and fixture arrays, reducing the need for multiple specialised stands. For teams prioritising versatility, this stand acts as a reliable single‑item solution for a variety of tasks. Practical handling and transport considerations With a mass of approximately 0.2 kg, the stand is easy to position and reconfigure on the workshop floor, facilitating fast changes between operations. The arm and post dimensions (74 x 55 x 12 mm) provide a compact but rigid support that keeps the indicator aligned during inside, outside and step measurements. The overall build emphasises robust handling and a long service life under routine workshop conditions. For tailored advice on the Metav IndustryLine indicator stand and local supply from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and delivery options. Technical Data Article number: M208.112.S GTIN: 4054469104812 Category: Magnetstative Manufacturer: Metav IndustryLine Facts Overall height: 185 mm Weight: 0.2 kg Arm dimensions: 74 x 55 x 12 mm Receiver: 40 x Ø8 mm Zolltarifnummer: 90319000 Special features Central‑force clamp for secure holding Universal design for broad compatibility Suited to dial indicators with 8 mm shank and dovetail mount Compact, low‑profile magnetic indicator stand FAQ Which indicators fit this stand most reliably? The small magnetic indicator stand (Metav IndustryLine M208.112.S) is designed for dial indicators with an 8 mm shank and those using a dovetail mount, ensuring secure seating and reliable readings. Is the base magnetic and suitable for metal workbenches? Yes — classified under magnetic stands, the unit features a magnetic base that provides stable attachment on ferrous surfaces for routine inspection tasks. How does the central‑force clamp improve measurements? The central‑force clamp in the M208.112.S applies even pressure around the indicator stem, reducing tilt and slippage so that repeatability and accuracy are improved during repeated measurements. Is the stand convenient to reposition during shop work? At approximately 0.2 kg and with a compact arm, the stand is deliberately lightweight and easy to move, enabling quick re‑setups between operations without excessive handling effort. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500x76 mm Magnetic Stand With Fine Adjustment, 250x250x80 Base, 800x51 Cross Arm - Microtech Metrology
Take advantage of the combination of a 520 N magnetic base, precision fine adjustment and a tall 1,500 mm column for stable, repeatable indicator setups; order directly via Metav Werkzeuge or ask our consultants if needed. Magnetic measurement stand – Microtech Metrology, 520 N magnetic base and fine adjustment A Magnetic measurement stand designed for secure, vibration‑resistant positioning of indicators and probes in workshop and inspection applications. Robust magnetic base, 520 N holding force Precision fine adjustment for exact positioning Stable base 250 x 250 x 80 mm Extended 1,500 x 76 mm column Cross arm 800 x 51 mm for flexible positioning Secure holding for repeatable measurements A firm foundation is essential for reproducible results; this measurement support uses a magnetic base rated at 520 N to secure the stand to ferrous surfaces and reduce movement during measurement cycles. The large, stable base (250 x 250 x 80 mm) distributes load and resists tipping when the arm is extended, which improves the consistency of successive readings and shortens setup time on the shop floor. Designed for inspection benches and machine‑side checks, this design reduces rework by stabilising the measuring chain. Precise positioning with controlled micro‑adjustment The integrated fine adjustment mechanism provides smooth, incremental movement for sensitive probe alignment. Combined with the 1,500 mm column and the 800 x 51 mm cross arm, the stand allows confined micro‑movements without coarse readjustment, so the indicator can be brought exactly to the measurement point. This level of control benefits tasks where small positional changes affect the result, such as dial indicator setups and comparative measurements, and helps to shorten cycle times through fewer iterative adjustments. Built for workshop use and flexible setups Structured for everyday workshop conditions, the construction supports longer reaches while maintaining rigidity: a tall column with substantial diameter keeps the arm stable under load, and the cross arm geometry enables offset positioning without compromising accuracy. The design is suited to inspection benches, assembly stations and machine checks where the measurement fixture must be repeatedly repositioned. The result is a tool that blends durability with usability, supporting a smooth workflow from set‑up to verification. Contact Metav Werkzeuge in Emmerich for tailored advice and supply of the Microtech Metrology magnetic measurement stand with 520 N base and precision fine adjustment Technical data Article number: 161152510 GTIN: 4061905047541 Category: Magnetstative Manufacturer: Microtech Metrology Facts Magnetic force: 520 Base dimensions: 250 x 250 x 80 mm Column: 1,500 x 76 mm Cross arm: 800 x 51 mm SKU: 161152510 Special features Fine adjustment Magnetic plate base Designed for indicator and probe positioning FAQ What holding capacity does the magnetic base provide? The magnetic base delivers a holding force of 520, ensuring secure fixation of the measurement stand during routine inspection and setup work. Is the stand suitable for extended reach measurements? Yes, the tall 1,500 mm column together with the 800 x 51 mm cross arm offers extended reach while keeping the assembly stable for precise positioning. Can the fine adjustment be used for delicate probe alignment? The fine adjustment mechanism is intended for micro‑positioning and allows delicate alignment of indicators and probes without coarse re‑set. Which applications are typical for this measurement stand? The stand is suitable for bench inspections, machine‑side checks and comparative measurements where a secure, adjustable fixture for indicators is required. What type of surfaces is the magnetic base compatible with? The magnetic base is designed to attach to ferrous metal surfaces commonly found on machines, tables and inspection benches. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150x10 Magnetic Base Stand With Fine Adjustment, 80 N Holding Force - Microtech Metrology
Benefit from a robust magnetic base, precise fine adjustment and a rigid steel column to secure repeatable indicator positioning in workshop and inspection environments; order the item directly via Metav Werkzeuge or consult our advisors if guidance is required. Magnetic Base Stand — Microtech Metrology, with fine adjustment and strong magnetic base The magnetic base stand secures dial indicators and test probes for inspection and setup tasks, offering controlled positioning and dependable holding for routine metrology and workshop use. Fine adjustment spindle for precise positioning Magnetic base with holding force 80 Steel column 170 x 12 mm for stable support Cross arm 150 x 10 mm for flexible reach Stable foundation for repeatable measurements A solid foundation is essential for consistent readings; the magnetic base delivers dependable clamping on ferrous surfaces while the compact base 50 x 60 x 55 mm minimises vibration and drift. The rated holding force 80 ensures the stand remains fixed during setup and measurement cycles, reducing rework and downtime. This stability translates directly into measurable efficiency gains on the shop floor: fewer re-adjustments, faster cycle times and more reproducible indicator readings when inspecting batches or aligning fixtures. Precision positioning with fine adjustment The integrated fine adjustment mechanism allows controlled micro‑movement of the indicator arm without coarse repositioning, enabling rapid attainment of the measuring zero and repeatable contact pressure. Such a spindle is particularly beneficial when aligning dial indicators or electronic probes to narrow tolerances, because it separates coarse clamping from the final precision move. The result is better measurement confidence and reduced operator variation during setup and inspection procedures. Workshop-ready design for straightforward handling Engineered for everyday industrial use, the stand combines a steel column and a rigid cross arm 150 x 10 mm to deliver reach and rigidity in one compact assembly. The column and arm geometry keeps the instrument cantilevered securely while permitting versatile mounting orientations for inside, outside and stepped measurements. Quick clamping and a no‑nonsense layout make the unit suitable for routine inspection benches, machine tool set‑ups and jig checks, offering robustness without compromising handling or storage. Contact Metav Werkzeuge for procurement advice and to confirm compatibility with specific measuring instruments; Metav Werkzeuge can advise on delivery from Emmerich and ensure the stand meets workshop requirements Technical data SKU: 161108000 GTIN: 4061905047411 Manufacturer: Microtech Metrology Core data Magnetic holding force: 80 Base: 50 x 60 x 55 mm Cross arm: 150 x 10 mm Column: 170 x 12 mm Fine adjustment: included Special features Magnetic plate for secure fixation Fine‑adjustment spindle for micro positioning Suitable for dial indicators and test probes Category: Magnetstative Image available: 161108000-main.jpg FAQ What surface types does the magnetic base adhere to? The magnetic base stand adheres to ferrous metal surfaces; the magnetic plate secures the stand during indicator set‑up and routine inspection work. Is fine adjustment included with the stand? Yes, the unit is supplied with an integrated fine adjustment mechanism to enable precise micro positioning of mounted indicators. Which instruments can be mounted on this indicator stand? Typical mounting is for dial indicators and electronic test probes; the cross arm and column geometry allow flexible alignment of most common indicator types. What are the main dimensions of the stand? Core dimensions are base 50 x 60 x 55 mm, cross arm 150 x 10 mm and column 170 x 12 mm as listed for this magnetic base stand. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
167 mm Magnetic Stand With 152 mm Cross Arm Chrome Rod, Ø10x153/Ø12x173 M8 - Metav IndustryLine
Take advantage of the combination of a strong magnetic base, a chromed support rod and a compact 167 mm height to achieve secure, space‑efficient mounting of indicators and probes; this results in reliable repeatability and fast setup in confined workstations. Order the magnetic indicator stand directly via Metav Werkzeuge or ask our consultants if needed. Magnetic indicator stand M208.105.S — 167 mm height, 152 mm cross arm (Metav IndustryLine) Magnetic indicator stand M208.105.S is a compact magnetic mounting solution for dial indicators and small measuring probes, designed for stable positioning and quick adjustment in machine shops and inspection benches. Strong magnetic base for secure hold Chromed support rod for corrosion resistance Compact 167 mm height for tight setups Ø10×153 cross arm and Ø12×173 column, M8 interface Consistent holding force for repeatable measurements A reliable magnetic base delivers the primary rational advantage: once engaged, the holder remains fixed even under slight lateral loads, which preserves alignment during measurement cycles. The stable mounting reduces slippage and measurement scatter, so readings from dial and electronic indicators remain consistent. This stability shortens cycle times in quality checks and prevents costly rework caused by repositioning errors. Robust, corrosion‑resistant construction for daily workshop use The support elements are made from a chromed rod construction that resists corrosion and provides a smooth sliding action for the cross arm, facilitating fine position adjustments. The Ø10×153 cross arm combined with a Ø12×173 column and an M8 interface ensures compatibility with standard indicator clamps and accessories. The material choice supports long service life in industrial environments and keeps maintenance needs low. Space-saving format that improves workflow and portability With an overall height of 167 mm and a compact footprint, this magnetic stand fits into constrained fixturing spaces where larger mounts cannot. At approximately 0.5 kg it is light enough for frequent repositioning yet substantial enough to remain vibration‑resistant when fixed. The compact format supports rapid changeovers on inspection benches and integrates smoothly into measurement routines, improving throughput without sacrificing accuracy. Contact Metav Werkzeuge today for tailored advice on integrating the magnetic indicator stand into inspection fixtures or for assistance with ordering and delivery from Emmerich. Technical Data SKU: M208.105.S GTIN: 4054469104591 Weight: 0.5 kg Facts Height: 167 mm Cross arm: Ø10×153 mm Column: Ø12×173 mm Thread/interface: M8 ECLASS: 21170601 Tariff code: 90319000 Special features Material: chromed support rod Category: Magnetic stands / Magnetstative Intended use: mounting of dial and electronic indicators FAQ What holding performance can be expected from the magnetic base? The magnetic base offers a strong, repeatable holding force suitable for typical bench and machine‑side indicator work; the magnetic indicator stand M208.105.S maintains secure fixation for consistent readings. Is the cross arm compatible with standard indicator clamps? Yes, the Ø10×153 cross arm together with the Ø12×173 column and M8 interface accepts common indicator clamps and accessory fittings used in industrial metrology. Can the stand be used near running machinery? The magnetic base provides stable fixation for static measurement tasks; for dynamic or high‑vibration environments additional support or specialist fixtures should be considered when using the magnetic indicator stand M208.105.S. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
173mm Magnetic Base Stand With Lamella Magnet Foot, Ø12mm Column Ø10x153mm Crossarm, 15mm Max Height Adjustment - Metav IndustryLine
Take advantage of a compact, precision-oriented measuring support that combines a lamella magnetic base with a firm column and a finely adjustable mounting range; its 60 holding power and slim cross arm make it ideal for repeatable indicator setups. Order the item directly via Metav Werkzeuge or consult Metav's specialists for application advice. Magnetic stand with lamella magnetic base — column Ø12 x 173 mm, cross arm Ø10 x 153 mm (Metav IndustryLine) The Magnetic stand with lamella magnetic base, column 173 x 12 mm, cross arm 153 x 10 mm is a compact magnetic measuring support designed for secure fixation of indicators and small gauges in workshop and inspection environments Lamella magnetic base with strong holding force 60 Adjustable height up to 15 mm for fine alignment Rigid column Ø12 x 173 mm with M8 thread Cross arm Ø10 x 153 mm for compact reach Stable mounting for repeatable measuring tasks The lamella base design provides a reliable grip on slightly uneven or profiled surfaces, improving repeatability when setting up dial or test indicators. Combining a lamella magnetic base with a 75 x 47 x 54 mm footprint and a holding value of 60 yields a low centre of gravity and high stability during measurement tasks. This configuration reduces the need for frequent re‑clamping and helps maintain consistent reference positions, which benefits shop‑floor gauging and quality‑control operations where short, precise runs are common. Precise alignment and compact handling Fine positional control is enabled by the adjustable height 15 mm, together with a sturdy column of Ø12 x 173 mm and a compact Ø10 x 153 mm cross arm. The M8 thread on the column allows secure attachment of accessories and fast, vibration‑resistant setup. The overall height of 207 mm and the modest 2 kg mass make the support straightforward to position on benches or machine tables while remaining rigid enough for accurate indicator readings. These properties suit small batch inspection, jig checks and fixture adjustments where space is limited but measurement quality must not be compromised. Workshop readiness and practical benefits Engineered for practical everyday use, the magnetic support features a low transport weight and compact dimensions that facilitate fast changes between measuring points. The combination of a lamella base and a slim cross arm offers quick re‑orientation without sacrificing holding performance. Supplied as a single‑piece measuring support, the construction is optimised for durability and uncomplicated maintenance; the modest footprint and M8 interface ensure compatibility with common indicator stems and mounting hardware encountered in mechanical workshops and inspection benches. Request technical advice or a quotation from Metav Werkzeuge for the Metav IndustryLine magnetic stand; contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance from Emmerich Technical data Article number: M208.118.1 GTIN: 4054469181554 Manufacturer: Metav IndustryLine Facts Weight: 2 kg Total height: 207 mm Magnet force: 60 Column: Ø12 x 173 mm Cross arm: Ø10 x 153 mm Base: 75 x 47 x 54 mm Thread: M8 Special features Max adjustable height 15 mm Lamella magnetic base Category: Magnet stands FAQ What surfaces does the lamella magnetic base work on? The lamella magnetic base on this magnetic stand improves contact on mildly uneven and profiled steel surfaces, increasing holding reliability compared with a flat pad. Can the support be used with standard dial indicators? Yes, the stand accepts common indicator stems via the M8 interface and is intended for secure mounting of dial and test indicators in workshop measuring tasks. How much adjustment is available for fine alignment? Fine alignment is facilitated by the adjustable height 15 mm, allowing small vertical corrections without re‑clamping the entire assembly. What are the main dimensions and handling characteristics? Key dimensions include a Ø12 x 173 mm column, Ø10 x 153 mm cross arm and a 75 x 47 x 54 mm base; the total height is 207 mm and the weight is 2 kg, which balances portability with rigidity. Which SKU and brand identify this product? This item is supplied under Metav IndustryLine, SKU M208.118.1, designed as a compact magnetic measuring stand for indicator applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180mm Magnetic Base Holder With 24kg Permanent Round Magnet, Ø12x173mm Column Ø10x153mm Crossarm, Chrome Rods - Metav IndustryLine
Secure measurements are achieved by combining a robust 24 kg permanent magnet base with a chrome‑plated support and fine adjustment for stable indicator positioning; this reduces rework and speeds up inspection cycles. Order the magnetic stand directly via Metav Werkzeuge or contact our consultants for application advice. Magnet dial gauge stand M208.105.D – 24 kg permanent magnet, compact height The Magnet dial gauge stand M208.105.D is a compact magnetic base for workshop and inspection use, designed to hold dial indicators securely on ferrous surfaces and to provide precise, repeatable positioning in confined spaces. Magnetic base with 24 kg holding force Compact 180 mm overall height for tight spaces Chrome‑plated rod and crossarm for corrosion resistance Compatible with dial indicators, 8 mm mount Steady holding that improves measurement reliability The magnetic base delivers a consistent 24 kg holding force via a round permanent magnet foot, which secures the stand to suitable ferrous workpieces and machine beds. A stable magnetic anchor reduces vibration and movement during probing, leading to more repeatable readings and fewer discarded parts. The combination of a rigid support rod and a firm base means that the stand acts as a reliable reference during short inspection runs or repetitive quality checks, streamlining in‑process control and lowering scrap rates. Precise positioning for confined inspection tasks A slender column and crossarm geometry allow close approach to small components while maintaining stiffness: the column measures Ø12 mm x 173 mm and the crossarm Ø10 mm x 153 mm, giving good reach without excessive flex. Fine adjustment is incorporated to permit micro‑positioning of the indicator tip, enabling accurate alignment with features such as bores, shoulders or steps. The chrome‑plated finish on the support components provides corrosion resistance and smooth movement of the mount, helping to preserve calibration and prolong service life. Straightforward compatibility with common indicators The stand accepts dial indicators with an 8 mm mounting stem and includes an M8 interface on the foot, matching conventional workshop hardware. This universality simplifies tool-up: existing indicators and holders can be transferred to the magnetic base without adapters, reducing setup time. The compact footprint (foot Ø50 x 10 mm) supports stable placement even on small machine ways, making the stand suitable for bench checks and on‑machine inspection alike. Choose Metav IndustryLine's magnetic dial gauge stand for reliable indicator mounting and contact Metav Werkzeuge for product availability and specification guidance from Emmerich's quality centre. Technical data Article number: M208.105.D GTIN: 4054469151687 Manufacturer: Metav IndustryLine Weight: 0.5 kg Dimensions & performance Magnet holding force: 24 kg Column: Ø12 x 173 mm, M8 Crossarm: Ø10 x 153 mm Foot: Ø50 x 10 mm Special features Chrome‑plated rod Permanent round magnet foot Fine adjustment included Suitable for dial indicators with 8 mm mount Customs tariff number: 90319000 FAQ Is this magnetic stand compatible with common dial indicators? The magnetic stand accepts indicators with an 8 mm mounting stem, so standard dial indicators fit directly to the M208.105.D without special adapters. How strong is the magnet and what surfaces does it work on? The M208.105.D features a 24 kg permanent magnet foot suitable for ferrous surfaces; non‑ferrous materials require a ferrous backing plate for reliable anchoring. Can the stand be used on machine ways during inspection? Yes. The compact foot and rigid chrome‑plated support are intended for bench and on‑machine inspections where a stable magnetic anchor and fine adjustment are required. What adjustment options are available for precise alignment? The stand includes a fine adjustment mechanism and a crossarm arrangement to permit micro‑positioning of the indicator relative to the tested feature. Is the magnetic foot threaded for accessories or mounting? The foot includes an M8 interface compatible with common accessory fittings and mounting hardware. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
185mm Magnetic Base Stand Small 10kg Central Force Clamp - Metav IndustryLine
Take advantage of a compact, high‑holding magnetic base with 10 kg holding force and a central force clamp for reliable indicator positioning; its 185 mm working height and small footprint ensure precise setups in tight inspection and workshop stations. Order directly via Metav Werkzeuge or contact the consultants for tailored advice. Magnetic Indicator Stand M208.112 — Small magnetic base, 10 kg holding force, 185 mm height (Metav IndustryLine) The Magnetic Indicator Stand M208.112 is a compact mounting solution for dial gauges and bore indicators, designed for stable measurement tasks in workshop and inspection environments. Compact 185 mm height, small footprint 10 kg magnetic holding force Central force clamp for precise locking Accepts 8 mm shank and dovetail indicators Precision and stability where it matters The small magnetic base delivers a 10 kg holding force, providing the necessary resistance against lateral and lifting forces during routine inspection work. Combined with the central force clamp, the stand secures the measuring arm with consistent clamping pressure, reducing the risk of slippage and minimising re-adjustment time. This combination improves measurement repeatability and shortens setup cycles, which supports efficient shop‑floor workflows and reduces machine downtime. Flexible mounting for common indicator types A compact column and articulated arm arrangement allow fast positioning of the measuring head. The base is prepared for dial gauges with an 8 mm shank and a dovetail mount, ensuring compatibility with most standard dial indicators and bore gauges used in metalworking and quality control. The foot features an M4 threaded fixing point for secure placement on flat surfaces or tooling plates, while the articulated geometry supports both vertical and angled orientations for inspection of turned parts, jigs and assemblies. Compact design for confined workstations With a total height of 185 mm and a footprint engineered for minimal obstruction, the stand fits tight benches and inspection rigs without sacrificing rigidity. The lightweight construction (approx. 0.4 kg) makes handling and temporary repositioning straightforward, while the 36 x 30 x 36 mm base dimensions allow stable contact on small reference areas. The compact format is particularly suitable for production lines and inspection benches where space efficiency and quick repeat measurements are priorities. Built for reliable daily use Engineered as a universal magnetic stand, the unit combines straightforward mechanics with robust function: an intuitively operated central clamping mechanism, a hardwearing magnetic base and a precision arm profile. The result is a dependable fixture for recurring checks, alignment tasks and quality assurance steps. Where consistent clamping and repeatable indicator placement are required, this stand contributes to shorter inspection times and improved traceability of results. For a precise, workshop‑ready magnetic mounting from Metav IndustryLine, request a quotation or technical recommendation from Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M208.112 GTIN: 4054469104805 Category: Magnetic stands ECLASS: 21170601 Facts Magnetic force: 10 kg Total height: 185 mm Weight: 0.4 kg Base dimensions: 36 x 30 x 36 mm Arm dimensions: 74 x 55 x 12 mm Special features Central force clamp Universal design Compatible with 8 mm shank and dovetail indicators Base prepared with M4 thread for fixing FAQ What is the holding capacity of the magnetic base? The magnetic base provides a holding force of 10 kg, ensuring secure fixation during measurement tasks with the Magnetic Indicator Stand M208.112. Which indicators fit the stand? The stand accepts dial gauges and bore indicators with an 8 mm shank or a dovetail mount, making it compatible with standard inspection equipment. Is the stand suitable for tight workspaces? Yes, the compact footprint and 185 mm total height make the stand suitable for confined benches and inspection rigs. How is the measuring arm secured? A central force clamp provides consistent clamping pressure for the arm, reducing movement and supporting repeatable positioning with the M208.112. Can the base be fixed to a tooling plate? The foot includes an M4 threaded point for secure attachment to flat surfaces or tooling plates when required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Extension Rod Ø16 mm M8 Thread For Magnetic Stand - Metav IndustryLine
Benefit from the 200 mm extension, the Ø16 mm shank and the standard M8 thread for a reliable, rigid connection that increases instrument reach without compromising stability; order the extension rod directly via Metav Werkzeuge or consult our specialists for compatibility advice. Extension for Magnetic Stand M208.104.V2 — 200 mm length, Ø16 mm, M8 thread (Metav IndustryLine) The Extension for Magnetic Stand M208.104.V2 is a 200 mm extension rod designed to increase the working envelope of magnetic stands, enabling flexible positioning of gauges and indicators in inspection and workshop environments 200 mm extension rod for magnetic stands Ø16 mm shank for compact mounting M8 threaded connection for secure fixing Greater reach with measurable stability The 200 mm extension provides a straightforward way to extend the range of magnetic bases and inspection stands while maintaining mechanical stability. The Ø16 mm shank offers a compact profile that minimises overhang and vibration, improving repeatability when measuring or holding dial indicators and probes. The solid-threaded interface ensures a defined connection, so positional deviations remain small during routine use. Compatibility with stands that accept an M8 thread simplifies integration into existing setups and reduces the need for adapters. Straightforward integration and workshop handling Designed as a practical accessory for measure-and-inspect tasks, the extension combines simple installation with robust fixation. The M8 thread is an industry standard; it is tightened with common tools and locks the extension into the magnetic base securely. At 0.3 kg the rod balances added reach and manageable weight, helping to retain the base's magnetic grip and preventing top-heaviness on compact stands. This balance supports frequent repositioning and fast setup in production and maintenance workflows. Reliable accessory from a trusted supplier As an accessory in the Metav IndustryLine range, this extension rod benefits from a focus on compatibility and consistent quality. The component is intended for use as an accessory to magnetic stands and gauges, delivering a predictable, repeatable extension of reach. For buyers seeking dependable workshop solutions, the combination of a defined M8 thread, precise shank diameter and a clear specification simplifies procurement and inventory management while supporting established metrology practices For ordering or technical clarification regarding the Metav IndustryLine extension rod, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to request a quotation or application guidance Technical Data Article number: M208.104.V2 GTIN: 4054469159447 Manufacturer: Metav IndustryLine Facts Length: 200 mm Shank diameter: Ø16 mm Weight: 0.3 kg Tariff number: 90319000 ECLASS: 21170613 ETIM: EC002219 Special features M8 threaded connection Compatible with stands with M8 thread Accessory for measuring instruments Category: Accessory / Magnetic stand extension FAQ Is this extension compatible with common magnetic stands? Yes. The Extension for Magnetic Stand M208.104.V2 is designed to fit magnetic stands that accept an M8 threaded accessory, ensuring straightforward compatibility. Can the rod be used with dial indicators and test probes? Yes. The extension provides additional reach for dial indicators and test probes while the Ø16 mm shank and M8 connection maintain sufficient rigidity for routine inspection tasks. What is the product reference for ordering or stock checks? The product is listed as M208.104.V2 (SKU M208.104.V2) in the Metav IndustryLine range and can be referenced when requesting availability. Does the specification state the material or surface treatment? No material or coating is specified for this item in the provided data; the technical bullets above reflect the available documented parameters. How does the extension affect the magnetic base’s stability? The extension increases reach while keeping a compact shank diameter and moderate mass (0.3 kg) to limit moment and preserve the magnetic base’s holding capability when used within typical workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x120x70 Magnet Base Stand With 600x32 Cross Arm, 1000x51 Column, 260 N Magnet Force - Microtech Metrology
Take advantage of a magnetic base with 260 holding power, a 1000×51 mm column and a fine adjustment, delivering stable, repeatable setups for routine inspection tasks; order the stand directly via Metav Werkzeuge or consult the team for application advice. Measuring stand — Magnetic measuring stand with fine adjustment by Microtech Metrology The Measuring stand offers a magnetic base with precise fine adjustment for secure positioning of dial gauges and small probes across inspection benches and workshop fixtures. Precise fine adjustment mechanism Strong magnetic base, force 260 1000×51 mm column for extended reach 600×32 mm cross arm and compact base Stability that keeps inspections repeatable A robust magnetic base with a rated value of 260 provides the foundation for consistent measurements on ferrous workpieces. The solid base dimensions (200×120×70 mm) minimise rocking and lateral movement, which reduces variability during repeated checks. In practice, that means faster setup and fewer re-runs when verifying run-out or concentricity, contributing directly to improved throughput and fewer measurement-related interruptions on the shop floor. Controlled positioning for precise readings The integrated fine adjustment allows incremental movement of the indicator mount, enabling sub-millimetre alignment without coarse repositioning. Coupled with the 1000×51 mm column and the 600×32 mm cross arm, the system offers both reach and the control needed for working across larger components or awkward geometries. The fine feed smooths out manual overcorrections, helping to keep the measuring tip aligned with the test point and thus reducing human-induced measurement error. Designed for everyday workshop use With a compact footprint and clearly specified arm and column dimensions, the stand fits inspection benches and mobile inspection rigs alike. The combination of a magnetic plate and an adjustable cross arm supports common metrology tasks such as repeat checks, comparative measurement and quick verification runs. The straightforward mechanical design reduces maintenance needs while offering dependable performance under regular workshop conditions. Efficient integration into the measurement routine The stand’s clear dimensional data and simple adjustment make it straightforward to plan fixturing and tool-up cycles. When paired with standard dial or digital indicators, the magnetic measuring stand accelerates first-article inspections and in-process checks, helping quality engineers and machinists keep production moving with measurable confidence. Clear physical data enables planners to assess fitment without guesswork. Contact Metav Werkzeuge for tailored application advice on the Microtech Metrology magnetic measuring stand and secure the right configuration for the inspection bench at your facility Technical data SKU: 161126310 GTIN: 4061905047527 ECLASS: 21170601 Dimensions & numbers Base: 200×120×70 mm Column: 1000×51 mm Cross arm: 600×32 mm Magnetic force: 260 Features Fine adjustment present Magnetic plate Category: Magnetic stands Manufacturer: Microtech Metrology FAQ What holding power does the magnetic base provide? The magnetic base provides a holding value of 260 as specified for the Microtech Metrology magnetic measuring stand (SKU 161126310), offering reliable clamping for ferrous parts during inspection. Is fine adjustment available and how does it help? Yes, the stand includes a fine adjustment mechanism that permits incremental positioning, improving alignment precision and reducing manual positioning errors for dial and probe measurements. Which column and arm dimensions are available on this model? This model features a 1000×51 mm column and a 600×32 mm cross arm, providing extended reach for larger components while maintaining stable support. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200x120x70 Magnetic Stand With 600x32 Cross Arm, 800x51 Column, Fine Adjustment, 260 N Holding Force - Microtech Metrology
Combine robust holding power, micrometric fine adjustment and a rigid column to secure repeatable indicator readings in workshop and inspection environments; order the Magnetic Measuring Stand directly via Metav Werkzeuge or consult the Metav specialists for application advice. Magnetic Measuring Stand — magnetic base with micrometric fine adjustment, Microtech Metrology Magnetic Measuring Stand for stable mounting of dial indicators and probes in inspection and workshop tasks, featuring a magnetic base plate and a micrometric fine-adjustment mechanism 260 magnetic holding force Micrometric fine adjustment mechanism 800×51 mm rigid column 600×32 mm adjustable cross arm Stable magnetic base for reproducible holding The central advantage of this inspection stand is its magnetic base, which provides firm anchoring on ferrous surfaces and reduces movement during measurement tasks. The base dimensions of 200×120×70 mm combined with a rated 260 magnetic holding force ensure a low centre of gravity and dependable support for mounted gauges. For metrology users this means fewer alignment corrections and higher repeatability when performing comparative checks or runout tests. The magnetic plate is particularly useful where clamping options are limited, allowing fast repositioning without compromise to stability. Micrometric fine adjustment for precise indicator positioning A dedicated fine-adjustment mechanism enables controlled, gradual movement of the measuring tip or indicator head, turning coarse set-up into a precise final alignment. This micrometric control is essential when setting zero points or when taking incremental readings on tight tolerances; it reduces operator-induced error and improves measurement consistency. The adjustable cross arm (600×32 mm) permits flexible reach and alignment across a range of workpiece geometries, so indicator stems and probes can be positioned with confidence and minimal rework. Robust column and flexible layout for workshop durability The stand’s 800×51 mm column and solid cross arm create a stiff support structure that resists bending during routine use, helping to preserve calibration and measurement integrity over time. Construction suited to inspection benches and toolrooms offers durability under frequent handling and reconfiguration. Where longer reach and strong support are required for medium-sized components, this configuration balances reach and rigidity to deliver reliable support for dial indicators, test probes and small electronic sensors without excessive bulk. For precision mounting and controlled indicator adjustment, choose Microtech Metrology’s Magnetic Measuring Stand — contact Metav Werkzeuge in Emmerich for technical guidance and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 161126210 GTIN: 4061905047510 Manufacturer: Microtech Metrology Facts Base dimensions: 200×120×70 Column: 800×51 Cross arm: 600×32 Magnetic force: 260 Special features Micrometric fine adjustment Category: Magnetic stands Suitable for mounting dial indicators and probes FAQ What is the rated holding force of the stand? The Magnetic Measuring Stand from Microtech Metrology is specified with a magnetic holding force of 260 according to the manufacturer data. Does the stand include a fine-adjustment function? Yes, the stand is equipped with a micrometric fine-adjustment mechanism to position indicators precisely. Which dimensions determine the reach and stability? Reach and support are governed by the 600×32 mm cross arm and the 800×51 mm column; the base measures 200×120×70. Is this stand suitable for workshop inspection benches? The robust column and magnetic base make the stand well suited to inspection benches and general workshop metrology tasks. Can the stand accommodate dial indicators and small probes? The stand’s design supports mounting of dial indicators and small test probes for repeatable measurement set-ups. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
220mm Rod Ø16 With 230mm Cross Arm Ø16 Chrome Plated Indicator Stand Frame - Metav IndustryLine
Take advantage of the combination of chrome-plated construction, compact Ø16 mm rod geometry and a standard M10 connection for dependable, repeatable indicator positioning on inspection benches. Order the component directly via Metav Werkzeuge or ask our consultants for application advice. Indicator stand frame M208.106.2 — chrome-plated rod Ø16 mm, compact arm 220–230 mm (Metav IndustryLine) A robust Indicator Stand Frame M208.106.2 designed as a magnet-less rod assembly for flexible positioning of dial indicators and measuring probes in workshop and inspection environments. Chrome-plated rod and arm Ø16 mm Arm length 220–230 mm for compact setups M10 connection for standard accessories Delivered without magnet for flexible use Precision and stability where it matters The chrome-plated rod construction delivers a stable support for measuring posts and probes, combining low weight with rigidity to reduce vibration and deflection during use. The Ø16 mm profile offers a balanced stiffness-to-mass ratio, ensuring precision when taking repeat readings on small to medium workpieces. The M10 interface provides a standardised connection that simplifies integration with existing indicator holders and clamps, so technicians achieve reproducible setups quickly and with minimal adjustment. Flexible positioning for tight inspection spaces Designed without an integrated magnet, the frame enables adaptable mounting strategies: it can be used with a separate base, clamp or bespoke fixture to match the shop-floor workflow. The compact arm length (around 220–230 mm) allows access into confined areas while maintaining arm stiffness for reliable measurements. The magnet-less design also helps when non-magnetic or insulated mounting points are required, supporting diverse inspection arrangements and reducing the need for additional bespoke hardware. Workshop-grade finish and straightforward compatibility The chrome-plated surface resists corrosion and eases cleaning, extending service life in everyday workshop conditions. The unit is compatible with standard dial indicators and lever-type probes, providing a practical solution for both routine checks and setup tasks. Supplied as a component of the magnet stand family, the frame suits metrology benches and mobile inspection rigs alike; it forms a repeatable part of a measurement process that aims to reduce setup time and improve throughput. Backed by Metav IndustryLine’s sourcing and distribution, the component fits into an established supply chain for European workshops. For tailored integration with existing indicator bases and to obtain the Metav IndustryLine frame with the correct accessories, contact Metav Werkzeuge for expert advice and ordering guidance. Technical data Article number: M208.106.2 SKU: M208.106.2 GTIN: 4054469104638 Description: Indicator stand frame without magnet; rod Ø16 mm; rod approx. 220 mm; cross arm approx. 230 mm Weight: 1 kg Core technical data Rod diameter: Ø16 mm Rod length: 220 mm Cross arm length: 230 mm Thread: M10 Tariff number: 90319000 Special features Chrome-plated rod and arm Delivered without magnet Compatible with standard indicator accessories Category: Magnet stand component FAQ Is the frame supplied with a magnetic base? No. The frame is delivered without a magnet; it is intended for use with separate bases or clamps to allow flexible mounting. What diameter and lengths does the frame use? The frame uses a Ø16 mm rod with an approximate rod length of 220 mm and a cross arm of around 230 mm for compact positioning. Which thread is provided for accessory mounting? The assembly features an M10 connection for standard indicator holders and accessory threads. Is the finish resistant to workshop corrosion? Yes. The chrome-plated finish on the rod and arm improves corrosion resistance and simplifies maintenance in standard workshop environments. Can this frame be used with standard dial indicators? Yes. The geometry and M10 mounting are compatible with most dial indicators and lever-type probes commonly used in workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
228mm Rod, 220mm Cross Arm Magnetic Indicator Stand Chrome-Plated, M10 Thread - Metav IndustryLine
Take advantage of a compact, modular assembly that combines a chrome-plated column with a rigid cross arm for stable indicator mounting; the practical M10 thread and standard diameters ensure compatibility with common indicator posts and fixtures. Order the assembly via Metav Werkzeuge or contact the Metav consultants for configuration advice. M208.104.S measuring stand (rod only) — chrome-plated column Ø16 mm and cross arm Ø12 mm, M10 thread A M208.104.S measuring stand (rod only) designed as a modular mounting solution for dial and digital indicator setups in inspection benches and workshop fixtures Chrome-plated rod construction Ø16 mm column with M10 thread Ø12 mm cross arm, 220 mm reach Compact 0.75 kg assembly Robust mounting for precise repeatable readings The stand's chrome-plated rod construction and defined diameters deliver a compact, low‑mass solution that nonetheless provides reliable positional stability for measurement attachments. The Ø16 mm column with M10 thread permits secure connection to standard indicator posts and clamps, while the Ø12 mm cross arm with 220 mm reach enables fine lateral positioning of gauges. For workshop and quality-control contexts this configuration reduces setup time and helps maintain repeatable readings during routine inspection tasks. Modular design that integrates with existing kits Designed as a rod-only component, this assembly serves as a flexible element within larger mounting systems. The standardised thread and diameters make the unit compatible with common accessories and allow straightforward replacement or upgrade of individual parts without overhauling the entire rig. The low mass of 0.75 kg facilitates simple handling and rapid reconfiguration on workbenches, making the product particularly suitable where fast changeovers and modularity improve process efficiency. Practical benefits for everyday inspection work Using a dedicated rod assembly keeps the focus on accurate indication rather than bulky stands. The M10 interface and measured lengths mean the component fits typical indicator hardware, so measurement loops stay short and rigid — a decisive advantage when aiming for crisp pointer response and minimal play. The chrome finish resists corrosion and supports long-term serviceability, which contributes to consistent measuring conditions and lower life‑cycle effort for maintenance teams. Contact Metav Werkzeuge for tailored mounting combinations or request assembly advice for the Metav IndustryLine M208.104.S measuring stand to complete inspection fixtures Technical data Article number: M208.104.S GTIN: 4054469104577 Tariff number: 90319000 Weight: 0.75 kg Material: chrome-plated rod Facts Column length: 228 mm Column diameter: 16 mm Cross arm length: 220 mm Cross arm diameter: 12 mm Thread: M10 Special features Rod-only construction for modular assembly Standard M10 interface for indicator posts Chrome-plated finish for corrosion resistance Compact design suited to bench and fixture use FAQ What fittings are compatible with this measuring stand? The M208.104.S measuring stand is supplied with a M10 threaded column and standard Ø16 mm / Ø12 mm diameters, making it compatible with common indicator posts and clamping accessories used in workshop inspection setups. Is the stand delivered as a complete unit or as a component? This item is a rod-only assembly intended as a component for modular measurement fixtures; the M208.104.S is therefore supplied without additional bases or indicator holders. Can the cross arm be repositioned for different measuring tasks? The cross arm on the M208.104.S provides 220 mm reach and is designed for flexible lateral positioning of gauges, enabling practical adjustment for diverse inspection requirements. What material finish does the stand have and what are the benefits? The stand features a chrome-plated finish, which offers enhanced surface hardness and corrosion resistance, supporting reliable long-term use in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
228mm Ø16mm Magnetic Base Stand 60kg Prismatic Base On/Off Switch, Chrome Rod Ø12x200 Cross Arm - Metav IndustryLine
Take advantage of a high‑holding magnetic base and a chrome‑plated Ø16 mm column for reliable, repeatable setups; the integrated prismatic base with on/off switch and fine adjustment ensure fast alignment and reduced rework. Order the magnetic indicator stand directly via Metav Werkzeuge or consult our specialists for application advice. Magnetic indicator stand M208.104 — 60 kg holding force, chrome column The Magnetic indicator stand M208.104 is a compact measuring support for workshop and inspection tasks, designed for secure mounting of indicators and fine positional control. 60 kg magnetic pull with on/off switch Prismatic base for secure positioning Fine-adjustment for precise alignment Chrome-plated Ø16 mm column, robust Secure base for repeatable measurements The stand features a prismatic base with an on/off switch that delivers a reliable 60 kg holding force, ensuring fixtures stay put during probing and adjustment. This strong magnetic locking reduces movement during measurement sequences, which translates directly into fewer retests and higher throughput. The prismatic contact also helps align the base on curved or irregular ferrous surfaces, so setups remain reproducible across batches. Precise positioning with fine adjustment Equipped with a dedicated fine adjustment, the mount allows controlled micro‑movements for accurate indicator placement without overshooting. Controlled micro‑positioning is especially useful when aligning dial indicators or test probes to narrow tolerances: the mechanism reduces the risk of damaging tips and speeds up the setup phase, providing a clear efficiency gain in repetitive inspection work. Durable construction for everyday workshop use The central column is chrome‑plated and measures Ø16 mm x 228 mm, providing a stiff yet manageable support that resists corrosion and wear. The cross arm (Ø12 mm x 200 mm) and M10 thread connection make the assembly straightforward and mechanically stable; the whole unit weighs 1.7 kg, combining portability with sufficient mass to avoid vibration during measurement. Compact footprint and practical dimensions With a total height of 281 mm and a compact base footprint, the stand fits tight benches and inspection rigs while still offering a useful reach for common machining and metrology tasks. The configuration supports quick re‑positioning between jobs, promoting an efficient workflow in both single‑piece checks and small‑batch quality control. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this Metav IndustryLine magnetic indicator stand or to place an order from our European stock Technical data Article number: M208.104 GTIN: 4054469104553 eClass: 21170601 Tariff number: 90319000 Dimensions & weights Total height: 281 mm Column: Ø16 mm x 228 mm Cross arm: Ø12 mm x 200 mm Base footprint: 59 x 50 x 55 mm Weight: 1.7 kg Magnetic force: 60 kg Thread: M10 Materials & features Chrome‑plated column Prismatic base with on/off switch Fine adjustment included Cross arm and column for modular mounting Category: Magnetic stands SKU: M208.104 FAQ How strong is the magnetic holding force? The magnetic holding force is 60 kg, provided by the prismatic base on the Magnetic indicator stand M208.104. Does the stand allow fine positional control? Yes, the unit includes a fine adjustment mechanism that enables controlled micro‑movements for precise indicator alignment. What are the main dimensions of the column and arm? The column is Ø16 mm x 228 mm and the cross arm Ø12 mm x 200 mm, giving a compact but stiff measuring support. Is the base suitable for curved or irregular ferrous surfaces? The prismatic base design provides secure contact on a variety of ferrous surfaces, improving stability during measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
231mm Height Magnetic Base Stand 60 kg Holding Force, Chrome Plated Rod, Prismatic Base On/Off Switch - Metav IndustryLine
Take advantage of the combination of a 60 kg magnetic holding force, a prismatic base with on/off switch and precise fine adjustment to secure repeatable indicator setups on the shop floor; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Magnetic base stand M208.105 — 60 kg holding force, prismatic base switch The Magnetic base stand M208.105 is designed for stable positioning of indicators and measuring fixtures in machining and inspection environments, offering a compact overall height and a secure, switchable prism base. 60 kg magnetic holding force Prismatic base with on/off switch Chrome-plated rod for corrosion resistance Fine adjustment for accurate positioning Reliable magnetic holding for consistent measurements The core advantage of this fixture is its 60 kg magnetic holding force, which provides a dependable anchor on ferrous surfaces and reduces the risk of movement during measurement. The prismatic base improves contact on uneven or slightly curved surfaces and the integrated on/off switch allows the magnetic field to be applied or released quickly without loosening clamps. Together, these features produce a secure reference platform that supports consistent repeatability when setting up dial indicators or digital gauges; this stability shortens setup time and reduces measurement variation on the production bench. Precise reach and adjustment for practical workshop use With an overall height of 231 mm, a column of Ø12 x 173 mm (M8) and a cross arm of Ø10 x 153 mm, the stand delivers a balanced combination of reach and stiffness suitable for everyday workshop tasks. The fine adjustment mechanism enables micro‑positioning of the indicator tip without large hand movements, making it easier to centre and align measuring instruments. At a weight of 1.4 kg, the assembly remains portable while offering sufficient mass to damp vibrations; the foot footprint of 59 x 50 x 55 mm supports stable placement on benches and machine beds. Durable construction and straightforward handling The main support is chrome‑plated, providing corrosion resistance and a smooth surface that resists wear in heavy use. The prismatic sole ensures secure contact on round or flat workpieces, and the magnetic on/off control simplifies repeated fixturing operations. This stand is supplied as a compact, ready-to-use fixture compatible with standard indicator mounts and helps to speed up inspection routines. The combination of robust materials and intuitive controls makes it a practical choice where reliable, repeatable positioning is essential. Contact Metav Werkzeuge for tailored application advice on the Metav IndustryLine magnetic base stand M208.105 with 60 kg holding force and prismatic base, and arrange supply directly from our Emmerich hub. Technical data Article number: M208.105 GTIN: 4054469104584 Tariff number: 90319000 Manufacturer: Metav IndustryLine Facts Magnetic force: 60 kg Overall height: 231 mm Column: Ø12 x 173 mm, M8 Cross arm: Ø10 x 153 mm Weight: 1.4 kg Special features Prismatic base with on/off switch Chrome-plated rod Fine adjustment Foot dimensions: 59 x 50 x 55 mm, M8 FAQ What holding force does the magnetic base provide? The magnetic base delivers a holding force of 60 kg, which is specified for the magnetic base stand M208.105 and suited to secure typical dial indicators and small fixtures on ferrous surfaces. Is the base suitable for curved or round parts? Yes, the prismatic sole on the magnetic base stand improves contact on round and irregular surfaces, allowing stable positioning on shafts and cylindrical components. How does the fine adjustment improve setup? Fine adjustment enables micro‑movements of the indicator without re‑clamping, making centring and alignment quicker and more precise when using the magnetic base stand M208.105. What are the main dimensions and how do they affect use? The stand’s overall height is 231 mm, with a column Ø12 x 173 mm and a cross arm Ø10 x 153 mm; this geometry balances reach and stiffness for routine workshop measurements while remaining easy to handle. Is the stand corrosion resistant? The main rod is chrome‑plated, providing surface protection against corrosion and wear to withstand regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250x250x80 Magnetic Base Stand With 800x51 Cross Arm And 1250x76 Column, Fine Adjustment - Microtech Metrology
Benefit from a combination of 520 N magnetic holding force, a stable 250×250×80 mm base and a sensitive fine adjustment mechanism to secure accurate, repeatable set‑ups; order this measuring solution via Metav Werkzeuge or consult our specialists for application advice. Measuring stand with magnetic base and fine adjustment by Microtech Metrology The Measuring stand is a magnetic‑base metrology mount designed for precise positioning of indicators and probes in workshop and inspection environments. Magnetic base with 520 N holding force Stable 250×250×80 mm base footprint Fine adjustment mechanism for precise alignment 800×51 mm cross arm and 1250×76 mm column Stable foundation for repeatable results A reliable base is the foundation of any accurate measurement. The large 250×250×80 mm base combined with a strong 520 N magnetic hold provides the stability required for repeatable readings on ferrous workpieces. This reduces vibration and movement during measurement tasks, which directly improves the consistency of results. The robust footprint also shortens setup time: once the base is set, fewer readjustments are necessary, making the unit well suited to production environments and quality‑control benches where throughput and repeatability matter. Fine positioning that cuts setup time The integrated fine adjustment allows controlled micro‑movements without relying on coarse manual pushes. The 800×51 mm cross arm and 1250×76 mm column give a broad reach and versatile mounting positions while maintaining stiffness. Together, these elements permit precise alignment of indicators or probes to the measurement point and reduce the need for repeated repositioning. For applications that require tight alignment — such as comparator set‑ups or repetitive batch checks — the adjustment mechanism improves ergonomics and reduces operator‑induced variability. Magnetic base and modular geometry for versatile use The magnetic base design enables quick, secure mounting to ferrous surfaces, turning a machine table, jig or plate into an instant measurement station. The long cross arm and tall column allow measurements on larger assemblies without sacrificing control. The configuration supports common metrology accessories and indicator types, so fixtures and probes can be adapted to evolving tasks. This flexibility ensures the stand remains a practical tool across inspection, maintenance and assembly workstations where different probe positions are needed. Built for workshop reliability and clear supply chain support Constructed for everyday use, the unit balances reach and rigidity to provide dependable performance in industrial settings. The combination of a firm magnetic anchor and a guided fine adjustment reduces measurement error sources and supports faster quality checks. Supplied through Metav Werkzeuge, the product benefits from the company’s quality filtering and logistical support based in Emmerich, which helps maintain consistent delivery and product traceability. For procurement and technical queries, the sales channel can advise on integration into existing measurement routines and compatible accessories. For assured precision in routine inspection choose the Microtech Metrology measuring stand via Metav Werkzeuge; for tailored advice contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 161152410 GTIN: 4061905047534 Brand: Microtech Metrology Category: Magnetic stands Facts Magnetic force: 520 N Base dimensions: 250×250×80 mm Cross arm: 800×51 mm Column: 1250×76 mm Fine adjustment: Yes Special features Magnetic base plate Fine adjustment mechanism Long cross arm for extended reach Robust workshop construction FAQ How strong is the magnetic holding force? The Microtech Metrology measuring stand features a magnetic holding force of 520 N (SKU 161152410), which secures the base to ferrous surfaces for stable measurements. Does the stand include fine adjustment for precise positioning? Yes, the stand is equipped with a fine adjustment mechanism that permits controlled micro‑movements for exact alignment of indicators or probes. What are the base and column dimensions? The base measures 250×250×80 mm, the cross arm is 800×51 mm and the column is 1250×76 mm, providing a broad footprint and extended reach for larger assemblies. Can the magnetic base be used on non‑ferrous surfaces? The magnetic base requires a ferrous mounting surface; for non‑ferrous applications a ferrous adapter plate or clamping fixture is recommended to provide a secure anchor. Is calibration or a certificate supplied with the stand? The product information does not list a factory calibration certificate; for calibration services or documentation options please contact Metav Werkzeuge for available solutions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
256mm Measurement Stand With Ø90mm Vacuum Base And Central Mechanical Clamp - Metav IndustryLine
Take advantage of a compact support that combines a 256 mm rod for steady reach with a vacuum base Ø90 mm for secure placement and a robust central mechanical clamping for repeatable locking; the fine adjustment delivers precise pointer positioning. Order the measuring stand directly via Metav Werkzeuge or consult the Metav specialists for application advice. Measuring Stand M208.119 — 256 mm rod, vacuum base Ø90 mm (Metav IndustryLine) The Measuring Stand M208.119 is a compact indicator stand for workshop and inspection use, designed to secure dial gauges on flat or non-magnetic surfaces with a vacuum base and central mechanical clamping Vacuum base Ø90 mm for secure attachment 256 mm rigid support rod Central mechanical clamping, fine adjustment Stable mounting for repeatable measurements The vacuum base ensures fast, secure fixing on flat surfaces where magnetic bases are unsuitable; with its Ø90 mm footprint the stand provides a wide contact area that limits creep and movement during repetitive checks. Combined with the rigid 256 mm support rod, the arrangement reduces setup time while improving the reproducibility of results. This stability translates into a consistent measurement environment, which is particularly relevant for incoming inspection or assembly-line spot checks where small setup variations can lead to significant deviations in documented tolerances. Precise positioning and ergonomic control A central advantage of this indicator stand is the central mechanical clamping, which locks the rod and arm with a single, reliable action. The integrated fine adjustment mechanism permits micro‑positioning of the probe, enabling controlled approach speeds and minimised overshoot when aligning an indicator/dial gauge. Compatibility has been provided for gauges with 4 mm or 8 mm shanks, so the stand adapts to common workshop and laboratory instruments without the need for additional adapters. The design keeps the operator interaction straightforward while supporting measurement protocols that demand traceable, repeatable placements. Portable, robust support for versatile inspection tasks Weighing only 0.75 kg, the assembly is light enough for bench-to-bench repositioning yet built to resist common workshop handling. The balance between reach and stiffness offered by the 256 mm rod makes the unit suitable for general metrology, fixture checks and small‑series assembly control; it fills the gap between compact benchtop supports and larger columns without compromising rigidity. Its category as a magnetic stand alternative complements Metav IndustryLine’s selection, providing a practical solution for inspection tasks on materials or surfaces where magnetic attachment is impractical. For application-specific guidance or to secure the Metav IndustryLine measuring stand M208.119 for routine inspection tasks, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and order support Technical data Article number: M208.119 GTIN: 4054469104843 ECLASS: 21170601 Category: Magnetic stands Facts Support rod length: 256 mm Base diameter: Ø90 mm Weight: 0.75 kg Compatible shank sizes: 4 mm, 8 mm Fine adjustment: yes Fine adjustment available: true Special features Central mechanical clamping Vacuum base for secure adhesion on flat surfaces Fine adjustment for precise probe positioning Suitable for dial indicators and gauge holders FAQ Which gauge shank sizes fit the stand? Compatibility is provided for gauges with 4 mm or 8 mm shanks; the stand accepts common indicator stems without extra adapters. Is the base suitable for non-magnetic surfaces? The vacuum base Ø90 mm delivers secure adhesion on flat, non-magnetic surfaces where a magnetic base would not hold. What is the effective reach and portability of the stand? With a 256 mm support rod and a weight of 0.75 kg, the M208.119 balances reach and portability for bench and light shop use. How is the arm locked in position? A central mechanical clamping mechanism locks the rod and arm reliably; the integrated fine adjustment permits micro‑positioning before final clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Reliable positioning for precise measurement at the machine
Magnetic base stands, also known as magnetic stands or magnetic mounting stands, provide stable, repeatable fixation for dial indicators, test indicators and small workpieces directly at the machine. The product group includes everything from heavy-duty units to compact mini versions, all designed to keep measurement devices exactly where they are needed during inspection and setup.
How magnetic base stands work and where they belong
The core of a magnetic base stand is a magnetic block base with a prism-shaped sole on some models for secure mounting on shafts. A multi-jointed adjustable arm with various end fittings carries the measuring instrument and allows fine positioning. Models differ by clamping concept — central mechanical clamping or individual joint adjustment — and by actuation, for example a switchable magnetic base operated via a rotary switch. Typical holding forces are 60 kg or 80 kg for standard bases; mini magnetic stands deliver significantly lower retention suitable for lighter gauges.
Practical benefits that improve workshop efficiency
- Significantly reduced setup time through rapid magnetic fixation and flexible arm positioning.
- Improved measurement stability thanks to high holding force and prism options for shaft mounting.
- Versatile use across inspection, alignment and on-machine measurement tasks with dial indicators and feeler gauges.
- Choice of specialised designs such as hydraulic magnetic stands, vacuum stands and models with fine adjustment for sensitive tasks.
- Compact mini stands for confined spaces where a full-size base would be impractical.
Why Metav is the sensible partner for magnetic base stands
As a precision partner, Metav combines practical range and market trust to make accurate measurement accessible to every workshop. With over 48,000 customers, a selection of more than 250,000 products and a logistics and quality hub in Emmerich that acts as a filter for the European market, Metav ensures reliable supply and knowledgeable product choice. The Metav range focuses on proven workshop solutions such as magnetic clamping prisms and flexible arm stands, supported by product selection guidance for industrial buyers.
In short
Magnetic base stands offer secure, adaptable positioning for on-machine measurement and inspection, reducing setup time and increasing repeatability. Choose between heavy-duty, fine-adjustment and mini options depending on the application.
FAQ
What tasks are magnetic base stands best suited for?
Magnetic base stands are ideal for on-machine measurement, alignment and inspection tasks where a dial indicator or test indicator must be held firmly and positioned precisely.
How strong are the magnets in standard stands?
Standard magnetic base stands commonly provide a holding force of 60 kg or 80 kg, while mini magnetic stands have a lower retention force suited to lighter measuring instruments.
Can magnetic base stands be mounted on shafts?
Yes. Models with a prism-shaped sole and a switchable magnetic base are specifically designed to mount on shafts and cylindrical surfaces, enabling stable positioning for rotational checks.
Which type of adjustment should I choose for fine measurement work?
For sensitive or precision inspection, select a stand with fine adjustment or a model with individual joint clamping; these allow subtle corrections without disturbing the instrument position.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com