Secure fixturing with adjustable clamping angles
Adjustable clamping angles provide a stable, repeatable method for holding workpieces during drilling, milling and welding, improving dimensional accuracy and setup speed by ensuring consistent reference faces. These clamping angles are used across metalworking and mechanical engineering applications where rigidity and positional repeatability are essential, offering versatile positioning for odd-shaped parts and complex jigs. Designed for workshop and industrial use, the solution combines robust construction with precise adjustability to reduce rework and increase throughput while supporting both manual and machine-assisted operations, featuring clamping stability, angle adjustment and repeatable positioning.
100x100x100mm Precision Angle Plate, Alloy Steel, Accuracy 0.005mm - Vertex
Reliable fixturing and consistent perpendicular alignment are achieved through the combination of 0.005 mm accuracy, robust alloy steel construction and a compact 100 x 100 x 100 mm footprint. Benefit from repeatable set-ups and reduced rework; order the part directly via Metav Werkzeuge or consult our specialists for fixture integration. VRS-44 Precision Clamping Angle by Vertex — 0.005 mm accuracy, alloy steel A compact precision clamping angle, the VRS-44 is designed for secure right-angle fixturing and accurate alignment in workshop and production jigs. High-precision 0.005 mm tolerance Solid alloy steel construction Compact 100 x 100 x 100 mm footprint Reduce setup time with dependable accuracy Precision in fixturing directly reduces measurement error and downstream rework. With a specified accuracy of 0.005 mm, the unit provides a quantifiable basis for repeatable perpendicular alignment; this level of precision corresponds to very small deviations in right-angle set-ups, ensuring consistent component positioning during machining or inspection. For workshops that value throughput and first-pass yield, the measurable accuracy translates into fewer alignment checks and faster cycle starts, supporting efficient production rhythms. Robust construction for stable clamping Manufactured from alloy steel, the component offers high structural rigidity that stabilises clamped parts under machining forces. The material choice delivers mechanical strength that helps maintain geometry under load, which in turn preserves the initial alignment and reduces the likelihood of distortion during processing. The weight and material properties contribute to steadiness during cutting or measuring operations, improving repeatability without the need for frequent recalibration. Small footprint, flexible workshop integration The compact dimensions of 100 x 100 x 100 mm combine with a mass of 3.7 kg to produce a durable yet easily positioned fixture element. This balance of size and mass is advantageous where bench space is limited or where multiple clamping elements must be arranged within a single jig. The modest footprint supports modular layouts and quick reconfiguration of clamping assemblies, enabling smoother transitions between jobs and better utilisation of existing workholding systems. Simple integration into clamping and inspection workflows Designed for clamping technology and fixturing applications, the VRS-44 fits into standard workshop workflows and metrology rigs without requiring specialised mounts. The clear technical parameters and catalogue identifiers facilitate procurement and inventory control, while the solid construction supports repeated mounting cycles. For production environments aiming to increase consistency, the device offers a practical way to improve alignment stability and reduce stoppages caused by mis-fixtured parts. Talk to Metav Werkzeuge in Emmerich for tailored advice on integrating Vertex VRS-44 components into existing fixtures and to request application-specific recommendations Technical data SKU: VRS-44 GTIN: 4061905085499 Manufacturer: Vertex Facts Accuracy: 0.005 mm Dimensions: 100 x 100 x 100 mm Weight: 3.7 kg Special features Material: Alloy steel eClass: 21020601 FAQ What accuracy can be expected from this clamping angle? The Vertex VRS-44 precision clamping angle delivers an accuracy of 0.005 mm, providing very small angular deviation for reliable right-angle fixturing. Which material is the component made from and why does it matter? The unit is produced from alloy steel; this material gives the clamping angle structural rigidity that helps maintain alignment under machining loads. Is the VRS-44 suitable for compact fixture layouts? Yes, with dimensions of 100 x 100 x 100 mm and a mass of 3.7 kg, the VRS-44 is designed for efficient placement in confined jig or bench spaces. Can the clamping angle be used in metrology setups as well as production jigs? The design and documented accuracy make the VRS-44 suitable for both inspection fixtures and production clamping applications where repeatable right-angle alignment is required. How is the product identified for ordering and inventory purposes? The component is listed under SKU VRS-44 with GTIN 4061905085499, simplifying procurement and stock management for production and maintenance teams. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100x150x100mm Precision Angle Clamp, Alloy Steel, Accuracy 0.005mm - Vertex
Take advantage of the combination of ±0.005 mm repeatability, alloy steel construction, and a compact footprint to ensure precise, stable clamping during inspection and setup. Order the part directly via Metav Werkzeuge or consult the team for application-specific advice. VRS-46 Precision Angle Plate by Vertex — Alloy steel, ±0.005 mm accuracy The VRS-46 is a compact precision angle plate designed for secure right-angle clamping and alignment tasks in inspection, setup and small-series production environments ±0.005 mm positional accuracy Alloy steel construction for durability Compact 100 x 150 x 100 mm footprint Stable 4.5 kg mass for vibration damping Consistent alignment for reliable measurement results The angle plate offers high-precision location control with an accuracy of ±0.005 mm, which translates into reproducible part alignment during inspection and machining setup. This level of precision reduces the need for repeated adjustments and shortens inspection cycles, providing a measurable increase in throughput. For users less familiar with metrology, accuracy here describes the maximum deviation expected when positioning a workpiece; lower values mean closer adherence to the intended geometry and fewer rejects. Robust build that stabilises the process Manufactured from alloy steel, the component combines toughness with the mass required to dampen machine vibration. The unit weight of 4.5 kg contributes to a secure, non-resonant clamping base that improves measurement stability and reduces micro-movements under probing or light machining forces. This durability supports long service intervals and consistent performance across daily use, making it suitable for workshops that demand both reliability and low maintenance overheads. Space-saving design that integrates easily into workflows With external dimensions of 100 x 150 x 100 mm, the plate occupies a modest bench area while providing a true right-angle reference for setup and inspection tasks. The compact footprint allows installation on granite plates, machine tables or fixture stacks without extensive reorganisation of the workspace. Reduced setup time and straightforward positioning mean faster part turnaround and a smoother process chain, supporting a cost-effective use of floor space and operator time. Contact Metav Werkzeuge today to discuss how Vertex’s VRS-46 precision angle plate can improve setup repeatability from our Emmerich warehouse and to arrange technical consultation or stock enquiries Technical Data Article number: VRS-46 GTIN: 4061905086892 Manufacturer: Vertex Facts Dimensions: 100 x 150 x 100 mm Weight: 4.5 kg Accuracy: 0.005 mm ECLASS: 21020601 Materials & Features Alloy steel construction Compact design for easy integration SKU: VRS-46 FAQ What level of positional accuracy does the angle plate provide? The VRS-46 precision angle plate provides an accuracy of ±0.005 mm, enabling tight positional repeatability for inspection and setup tasks. Which material is the plate made from and why does that matter? The plate is made from alloy steel, chosen for its strength and mass, which help to dampen vibration and maintain stable clamping under probing or light machining. What are the external dimensions and is it suitable for small benches? The external dimensions are 100 x 150 x 100 mm, making the unit suitable for compact benches, granite plates and tight workshop layouts. How does the weight affect performance during measurement? At 4.5 kg, the mass improves stability and reduces micro-movements during measurement, which enhances repeatability and lowers measurement uncertainty. Is this plate suitable for inspection and for production setup? Yes, the design and accuracy of this angle plate make it suitable for both inspection and small-series production setup where precise right-angle referencing is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
112mm Workholding Angle With 15x ER40 Collets Set, 15 Kg Max Load - Vertex
Take advantage of the combination of high repeatability (0.01 mm), a 15-piece ER-40 collet set and a compact footprint for stable, efficient fixturing on milling machines; order the unit directly via Metav Werkzeuge or consult our specialists if clarification is required. VUA-ER40 Angle Plate with 112 mm diameter and 15-piece ER-40 collet set — Vertex The VUA-ER40 is an angle plate designed to provide secure part fixturing and repeatable clamping for workshop and light production machining tasks. 112 mm diameter for stable clamping 15-piece ER-40 collet set included Precision manufacturing with 0.01 mm accuracy Max load 15 kg for heavy-duty fixturing Engineered for reliable workshop fixturing and repeatability The clamping assembly is engineered to deliver consistent positioning and rigid support for small- to medium-sized components. With a 112 mm diameter contact face and a robust construction, the fixture resists deflection under load, helping to maintain machining tolerances. The documented 0.01 mm accuracy reflects the manufacturing standard of the component and provides a verifiable basis for quality-critical operations. As a consequence, set-up times are reduced and the risk of rework is lowered, supporting steady production throughput. Integrated ER-40 collet set for flexible mounting of workpieces Included with the angle plate is a 15-piece ER-40 collet set, covering a wide range of shaft and tool diameters (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26 mm). The collection of collets enables direct gripping of turned parts, mandrels and tooling without additional adapters, which simplifies fixturing and reduces ancillary inventory. ER-40 is an established clamping standard; its high clamping force and concentricity make it suitable for operations where runout and concentricity matter. Precision and stability that support productive machining Mass and geometry contribute to stability: the assembly weight of 14 kg and compact dimensions (180 x 110 x 181 mm) create a low centre of gravity and minimise vibration transfer during cutting. The clearly defined max. load of 15 kg guides selection for heavier workpieces while preserving positional accuracy. These measurable characteristics help planners and machine operators compare fixtures objectively and choose the right tool for specific machining tasks. Streamlined procurement and workshop integration Supplied as a complete set, the angle plate plus collet assortment reduces the need for multiple separate purchases and simplifies shelf stocking. The configuration is particularly suitable for job shops and maintenance departments that require quick reconfiguration between jobs and reliable repeatability across batches. Availability through Metav Werkzeuge adds the assurance of European distribution and quality control from the Emmerich facility, helping to shorten lead times and ensuring parts are delivered under a consistent quality filter. Request the VUA-ER40 from Metav Werkzeuge for delivery from Emmerich, or contact our consultants via info@metav-werkzeuge.com or +49 2822 7131930 for application advice and configuration support Technical Data Article number: VUA-ER40 GTIN: 4061905083761 Manufacturer: Vertex Facts Dimensions: 180 x 110 x 181 mm Diameter: 112 mm Weight: 14 kg Accuracy: 0.01 mm Max. load: 15 kg Special features Set: 15x ER-40 collets (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26) Designed for fixturing and precise part clamping Compact footprint for flexible machine mounting FAQ What collet sizes are included with the set? The set contains 15 ER-40 collets in the following sizes: 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25 and 26 mm, supplied as a complete ER-40 collet set. Can the assembly handle larger workpieces? The angle plate is rated for a maximum load of 15 kg; for heavier components a dedicated heavy-duty fixture should be selected to maintain the specified accuracy. What level of positioning accuracy can be expected in practice? The component is manufactured to an accuracy of 0.01 mm, providing high repeatability for precise machining tasks when used with appropriate set-up procedures and machine capabilities. Is the VUA-ER40 suitable for production or only for workshop use? The VUA-ER40 is suitable for both workshop and light production environments where compact, repeatable fixturing and the included ER-40 collet range meet the application requirements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
133mm Precision Angle Clamping Mount Height-Adjustable Rotating, T-Slot M12 - Vertex
Take advantage of the combination of precision, robust stability and flexible fixturing to speed up setup times and improve repeatability on the shop floor. Order the Vertex VUA-408 directly via Metav Werkzeuge or contact our advisers for specification guidance. VUA-408 Precision Clamping Angle — height-adjustable and rotatable (Vertex) The VUA-408 Precision Clamping Angle is a height-adjustable, rotatable clamping solution intended for accurate fixturing on machine tables and inspection setups Height-adjustable, rotatable clamping geometry Robust base: 110 x 182 mm footprint Compatible with 100 x 200 mm machine tables T-slot M12 for secure fixture mounting Faster setups and measurable repeatability The VUA-408 delivers precision fixturing that reduces setup time and minimises rework. The height-adjustable and rotatable design allows components to be positioned quickly and locked in place without complex shims or auxiliary tooling. The presence of a T-slot M12 means standard clamping bolts can be used to secure the angle directly to fixtures or machine tables; for operations that require repeated referencing, this configuration improves positional repeatability and shortens overall cycle time. Stable support for machining and inspection A substantial mass and contact area contribute to consistent results during machining or metrology checks. With a footprint of 110 x 182 mm and a gross mass of 15 kg, the unit resists vibration and maintains orientation once clamped. This inherent stability benefits both cutting and measuring tasks by reducing chatter, lowering the risk of part deviation and enabling tighter tolerances to be maintained without elaborate damping measures. Flexible fixturing compatible with common tables Designed for integration with common machine and inspection tables, the angle is compatible with 100 x 200 mm table patterns and accepts M12 T-slot mounting. This makes the device suitable for a range of components and fixture setups found in production, toolroom and quality departments. The rotatable head permits angular adjustments without unclamping the base, offering a practical way to adapt to varying workpiece geometries while maintaining a single datum reference. Practical benefits on the workshop floor Beyond technical advantages, the clamping angle simplifies daily workflows: fewer setup steps, reliable clamping interfaces and less reliance on bespoke fixtures. For operations seeking productivity gains, the combination of robust construction and convenient adjustment supports faster throughput and steadier quality. Supplied as a compact, ready-to-install item, the unit integrates into existing fixturing strategies with minimal additional tooling. Contact Metav Werkzeuge in Emmerich for tailored fixturing advice and to arrange delivery of the Vertex VUA-408 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VUA-408 GTIN: 4061905085048 Manufacturer: Vertex Weight: 15 kg Height: 133 mm Footprint: 110 x 182 mm Machine table compatibility: 100 x 200 mm T-slot size: M12 Facts Weight: 15 kg Height: 133 mm Footprint: 110 x 182 mm Machine table: 100 x 200 mm T-slot: M12 Special features Height-adjustable and rotatable Designed for machine table fixturing T-slot M12 mounting SKU: VUA-408 FAQ What applications is this clamping angle intended for? The VUA-408 is intended for precision fixturing on machine tables and inspection setups where controlled angular positioning and stable support are required. How is the VUA-408 mounted to a machine table? Mounting is achieved via the integrated T-slot interface; the unit accepts M12 clamping hardware for secure attachment to compatible 100 x 200 mm table patterns. Does the device require additional fixtures to allow rotation? No additional fixtures are required for basic rotation; the height-adjustable and rotatable mechanism permits angular adjustment and locking without auxiliary shims. What are the physical dimensions relevant for bench or table planning? Key dimensions are a footprint of 110 x 182 mm and an overall height of 133 mm, with a mass of 15 kg—useful for planning base support and clamping arrangements. Is the VUA-408 suitable for repeated production referencing? Yes. The combination of stable mass, secure M12 T-slot mounting and adjustable geometry makes the VUA-408 well suited for repeated referencing in production and inspection processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
133mm Precision Clamping Angle, Height Adjustable and Rotary, 126x250mm Table M12 T-Slot - Vertex
Benefit from a compact footprint, robust mass and precise adjustment range to secure repeatable set-ups and fast changeovers on inspection and small-machine tables. Order the VUA-510 directly via Metav Werkzeuge or consult our advisers for application-specific guidance. VUA-510 Precision angle clamp — height-adjustable and rotatable by Vertex The VUA-510 is a height-adjustable, rotatable precision angle clamp designed for accurate workholding and set-up tasks on inspection tables and small machine tables. Height-adjustable and rotatable design Measuring table 126 x 250 mm T‑slot M12 for secure clamping Compact base 110 x 182 mm Stable, repeatable workholding for precision setups The VUA-510 delivers a stable platform for precise alignment thanks to its substantial mass and compact footprint. The compact base 110 x 182 mm and overall weight of 18.1 kg minimise movement under load, providing repeatable orientation during measurement and machining operations. The combination of a firm base and clearly defined datum faces simplifies fixture planning and reduces rework, which supports efficient batch processing and inspection regimes. Fast alignment with height and swivel adjustment Adjustability is central to the unit’s efficiency: the height-adjustable and rotatable features permit rapid orientation of parts without reclamping. This flexibility reduces setup time and increases throughput by allowing multiple faces to be accessed from a single clamping operation. The swivel axis is engineered for controlled movement, enabling fine alignment for measurement routines and small-scale machining tasks where secure, accurate positioning is required. Designed to integrate with inspection and machining workflows The measuring table 126 x 250 mm and the T‑slot M12 enable straightforward attachment of clamps, fixtures and gauges commonly used in metrology and workshop environments. Integration with surface plates, small machine tables and modular fixture systems is facilitated by the generous table area and standard T‑slot format, making the unit suitable for assembly, quality control and prototype work where reliable workholding speeds up verification and reduces bottlenecks. Durable geometry and quality manufacturing for consistent results Constructed with precision geometry and a focus on longevity, the angle clamp maintains alignment across repeated cycles. The solid mass and engineered contact surfaces preserve set-up integrity, lowering the risk of position drift during measurement or light machining operations. Supplied under the Vertex range, the unit supports a professional shop floor approach where durability and consistent performance are prerequisites for predictable production results. For flexible, repeatable set-ups with Vertex precision, contact Metav Werkzeuge to arrange supply of the VUA-510 from our Emmerich stock or to request technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VUA-510 GTIN: 4061905087271 Manufacturer: Vertex Key dimensions Base (foot): 110 x 182 mm Measuring table: 126 x 250 mm Height: 133 mm Weight: 18.1 kg T‑slot: M12 Features Height-adjustable Rotatable eClass: 21020601 Category: Vertex FAQ What are the measuring table dimensions? The measuring table on the VUA-510 is 126 x 250 mm, providing a stable area for fixtures and gauges. Does the device allow height and swivel adjustment? Yes, the unit features both height-adjustable and rotatable functions to simplify multi-face alignment. What clamping interface is provided? Clamping is via a standard T‑slot M12, suitable for common clamping elements and fixtures. Which applications suit this angle clamp? The device is intended for precision workholding, inspection set-ups and small-part machining tasks where stable orientation is required. What are the base and overall dimensions? The compact base measures 110 x 182 mm, overall height is 133 mm and the unit weighs 18.1 kg. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x200x120mm Precision Right-Angle Clamping Square 0.005mm Accuracy, Alloy Steel - Vertex
Benefit from high-precision alignment and a robust alloy-steel build: the 0.005 mm accuracy, compact 200 x 200 x 120 mm footprint and substantial 14.3 kg mass deliver stable, repeatable clamping for machining and inspection tasks. Order the Precision Angle Plate directly via Metav Werkzeuge or consult our specialists for application advice. Precision Angle Plate VRS-85 (Vertex) — Alloy steel, 0.005 mm accuracy The Precision Angle Plate VRS-85 is a compact workholding plate engineered for accurate 90° set-ups in machining, inspection and layout operations. *High precision: 0.005 mm accuracy *Robust alloy-steel construction *Compact footprint: 200 x 200 x 120 mm *Stable 14.3 kg mass for vibration damping Consistent accuracy for reliable production Built for repeatable tasks, the angle plate provides a measured accuracy of 0.005 mm, which reduces setup variation and shortens inspection loops. The high metrological standard means parts can be repositioned with confidence, lowering rework and improving throughput. By using a rigid reference surface, the device supports precise squaring and fixturing; operators and quality staff benefit from reduced adjustment time and clearer traceability of results. Durable construction that supports machining demands Manufactured from alloy steel, the unit combines strength with dimensional stability under load. The solid mass of 14.3 kg dampens vibration, which protects cutting edges and enhances surface finish during light milling or drilling operations. The compact dimensions (200 x 200 x 120 mm) allow installation on machine tables and inspection benches without excessive workspace demands, while the robust material choice ensures a long service life in demanding workshop environments. Easy integration into inspection and fixturing workflows Designed as a pragmatic workholding solution, the plate fits standard clamping systems and inspection jigs, enabling rapid alignment of components for measurement or secondary operations. The simple geometry and flat datum faces make it suitable for both optical inspection and contact measurement tasks; this supports consistent workholding strategies and helps maintain quality goals across small-batch and prototype production. Documentation and drawing views are available to aid fixture design and machine planners. Choose the Vertex VRS-85 for precision clamping and contact Metav Werkzeuge for tailored advice and supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VRS-85 GTIN: 4061905096174 ECLASS: 21020601 Manufacturer: Vertex Facts Dimensions: 200 x 200 x 120 mm Accuracy: 0.005 mm Weight: 14.3 kg Special features Material: alloy steel Suitable for clamping and inspection workholding Images available: technical drawing and detail views FAQ What tolerance can be expected when using the angle plate for fixturing? The Precision Angle Plate VRS-85 achieves a tolerance level indicated by its 0.005 mm accuracy, providing dependable alignment for fixturing and measurement tasks. Is the unit suitable for use on a machine table as well as an inspection bench? Yes, the VRS-85 is designed for both machine-table fixturing and bench inspection, thanks to its compact 200 x 200 x 120 mm footprint and stable 14.3 kg mass. What material is the angle plate made from and why does it matter? The plate is made from alloy steel, chosen for dimensional stability and wear resistance, which supports long-term precision and reliable clamping performance. Are technical drawings and images available to assist integration? Technical drawing and detailed images are provided to support design and integration of the VRS-85 into existing inspection and machining workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x220mm 90° Clamping Angle With T-Slots M16, 300x300mm Table, 59.2kg - Vertex
Take advantage of a precise 90° alignment, generous mounting surface and robust 59.2 kg construction for stable fixturing and consistent machining results. Order the clamping angle directly via Metav Werkzeuge or ask our consultants if needed. BP22-830 Clamping Angle — 90° with M16 T-slots by Vertex BP22-830 is a 90° clamping angle designed for rigid positioning and flexible fixturing in metalworking and inspection set-ups 90° alignment with integrated M16 T-slots Stable 59.2 kg construction for vibration damping 300 x 300 mm work table for flexible fixturing 300 x 220 mm base for secure machine mounting Accurate 90° positioning that improves process reliability The 90° configuration with M16 T-slots provides a clear technical basis for repeatable set-ups. T-slots are standardised channels that accept T-bolts and clamping elements; this allows secure attachment of clamps and fixtures without bespoke adapters. For shops where consistent squareness matters, the design reduces set-up variation and supports traceable fixturing steps, contributing to predictable machining and inspection outcomes. A substantial footprint that reduces vibration and movement A larger base and top surface enhance stability during cutting or measuring operations. With a 300 x 220 mm base and a 300 x 300 mm worktable combined with a 59.2 kg mass, the assembly reliably dampens vibrations that would otherwise affect surface finish and measurement repeatability. The increased inertial mass is especially beneficial when using heavier clamps or when performing medium-duty milling passes; the result is fewer reworks and tighter tolerances. Flexible integration for common workshop workflows The top table layout supports commonly used clamping patterns and standard components, enabling fast integration into existing fixturing plans. Compatibility with standard M16 clamping hardware means off-the-shelf bolts and clamps can be used without modification, saving setup time. The robust footprint and slot spacing allow the unit to serve as a permanent mounting solution on inspection benches or as a repeatable fixture on machining centres. Practical handling and application notes for everyday use The unit is designed for workshop use where durability and ease of use are priorities. The substantial weight improves stability but requires appropriate handling equipment during installation; once positioned, the clamping angle offers long-term positional stability. Regular inspection of clamping hardware and cleaning of T-slots will help maintain the original alignment characteristics and prolong service life. Discuss integration and availability with Metav Werkzeuge — our consultants will advise on mounting options and supply logistics for the Vertex clamping angle from Emmerich to your workshop Technical data SKU: BP22-830 GTIN: 4061905086403 Manufacturer: Vertex Dimensions & weight Base (foot): 300 x 220 mm Work table: 300 x 300 mm Weight: 59.2 kg T-slot size: M16 Features & suitability 90° configuration with T-slots eClass: 21020601 Category: Vertex FAQ What does the M16 T-slot specification mean for fixture choice? The M16 T-slots on the BP22-830 clamping angle accept standard M16 T-bolts and clamping elements, allowing direct use of common fixture hardware without special adapters. Is the BP22-830 suitable for use on both inspection and machining tables? Yes, the Vertex BP22-830 clamping angle is designed as a rigid fixturing component suitable for inspection benches and machining set-ups due to its 300 x 300 mm work table and robust mass. How should the clamping angle be handled during installation? Given the BP22-830’s weight of 59.2 kg, mechanical handling or team lifting is recommended for safe installation; once secured, the unit provides a stable platform for fixturing. Can standard clamps and bolts be used directly with this unit? Standard M16 clamps and T-bolts are compatible with the integrated T-slots, enabling direct use of off-the-shelf clamping hardware with the Vertex clamping angle. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x220mm Clamping Angle 90° With T-Slots, 62.5 kg - Vertex
Take advantage of the combination of robust stability, standard M12 T-slots and a compact working surface to streamline set-up and improve machining repeatability; order the Vertex BP22-30 angle plate directly via Metav Werkzeuge or ask our consultants if needed. BP22-30 Vertex 90° Angle Plate with M12 T-slots The BP22-30 is a 90° angle plate designed for secure workholding on milling machines, inspection tables and general fixture use. Heavy 62.5 kg solid construction 300 x 300 mm working table M12 T-slots for standard fixtures Precision 90° clamping angle Stable foundation that improves machining results A heavy, rigid workholding base reduces vibration and increases process stability; the 62.5 kg mass of this angle plate provides a damped platform that helps maintain cutting consistency and surface quality. By fixing the workpiece to a stable reference, the risk of chatter and micro-movement is reduced, which in turn decreases rework and scrap rates. The solid construction translates directly into higher first-pass yields and more predictable machining cycles, supporting efficient throughput in small to medium workshops. Quick integration with standard clamping systems The angle plate features M12 T-slots across a 300 x 300 mm working table to accept commonly used clamps, studs and fixtures. This standardised interface simplifies fixture planning and reduces the need for bespoke adapters; off-the-shelf components can be used to secure parts rapidly. The clear alignment of slots enables modular set-ups and repeatable positioning; installers and shopfloor planners will appreciate how straightforward component interchange becomes when the clamping interface follows established norms. Accurate right-angle set-ups that save time Engineered as a 90° right-angle reference, the plate aids fast alignment of parts for milling, drilling and measurement operations. A true right-angle datum shortens set-up time because edges and faces can be registered directly, avoiding complex jigs. The result is consistent part geometry from batch to batch and improved repeatability, which matters most where positional accuracy is paramount. Faster set-ups also free machining capacity for additional jobs, improving overall workshop productivity. Confidence through trusted supply and practical support Sourcing from a reliable partner streamlines procurement and reduces operational risk. Metav combines wide product availability with a pragmatic approach to order fulfilment from Emmerich, offering a concentrated selection of precision tools alongside practical expertise. That established supply chain and the concept of a European quality filter support continuity of supply and dependable delivery. For workshops seeking dependable workholding, this angle plate is backed by a supplier network that emphasises long-term reliability and pragmatic service. Discuss specification needs with Metav Werkzeuge and confirm whether the BP22-30 angle plate fits the intended fixture concept; contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical advice from the Metav team Technical data Article number: BP22-30 GTIN: 4061905083075 EClass: 21020601 Numbers Working table: 300 x 300 mm Base footprint: 300 x 220 mm Weight: 62.5 kg T-slot size: M12 Special features Designation: 90° with T-slots Product type: Angle plate Category: Vertex FAQ What are the tabletop dimensions? The BP22-30 angle plate provides a 300 x 300 mm working table suitable for compact fixtures and medium-sized components. Which T-slot size is fitted to the plate? This angle plate uses M12 T-slots, allowing connection of standard clamps and modular fixturing systems in common use. Is the plate fixed at a true right angle? The product is designed as a 90° reference plate for right-angle clamping and alignment operations on machine and inspection equipment. How heavy is the unit and what are the handling considerations? The Vertex BP22-30 weighs 62.5 kg; handling and installation should be planned using appropriate lifting equipment or team lifting to ensure safe mounting. Can the plate accept standard milling vises and clamps? Yes, the combination of M12 T-slots and the standard working surface enables the use of common milling vises, clamp sets and threaded studs with the BP22-30 angle plate. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
300x300x150mm Precision Right Angle Clamping Block, Alloy Steel, Accuracy 0.005mm - Vertex
Combine 0.005 mm accuracy with a robust alloy steel construction to ensure stable, repeatable set-ups and reduced rework on demanding machining tasks. Order the VRS-1206 directly via Metav Werkzeuge or ask our consultants for application advice. VRS-1206 Precision Clamping Angle by Vertex — 0.005 mm accuracy, alloy steel The VRS-1206 Precision Clamping Angle is a rigid workholding component designed for exact angular set-ups and machine-shop fixturing, suitable for precision grinding, inspection and milling applications. High accuracy 0.005 mm Robust alloy steel construction Dimensions 300 x 300 x 150 mm Solid 32.3 kg for stable set-up Reliable accuracy that reduces rework and inspection time The device delivers a declared accuracy of 0.005 mm, providing a dependable reference for squaring and angular set-ups. Such a level of precision minimises iterative adjustments during machining and inspection, which in turn reduces scrap rates and secondary operations. In practical terms, this degree of tolerance supports high-precision tasks where consistent repeatability is essential; the specification is meaningful for calibration, gauging and production runs that demand tight alignment. Mass and dimensions for vibration damping and stable clamping With a substantial mass of 32.3 kg and external dimensions of 300 x 300 x 150 mm, the unit acts as a stable platform that resists chatter and movement during clamping or machining. The inherent mass improves damping characteristics compared with lighter fixtures, leading to better surface finishes and reduced tool wear in many applications. For process planners, the compact footprint allows installation on machine tables and inspection benches without extensive reorganisation of existing set-ups. Durable alloy steel construction for long service life Manufactured from alloy steel, the component offers mechanical robustness and sustained dimensional stability under routine shop-floor conditions. Alloy steel provides a balance between hardness and toughness, making the component resilient to handling and repeated fixturing cycles. When incorporated into a workholding strategy, this durability supports predictable performance over time and contributes to lower total cost of ownership through fewer replacements and less frequent recalibration. Practical integration into workshop workflows The design supports standard workholding practices and complements common fixturing accessories used in machining and inspection environments. As a precision reference, it can be combined with clamps, parallels and magnetic fixtures to create versatile set-ups for batch processing or one-off prototypes. Documentation of the nominal values and the known accuracy enables quality assurance teams to include the component in inspection plans and process audits, ensuring traceable, verifiable set-ups. Contact Metav Werkzeuge for tailored procurement and application guidance on the Vertex VRS-1206; our consultants can advise on integration into existing workflows and supply logistics from Emmerich. Technical Data SKU: VRS-1206 GTIN: 4061905096181 Manufacturer: Vertex Facts Dimensions: 300 x 300 x 150 mm Accuracy: 0.005 mm Weight: 32.3 kg Special features Material: alloy steel ECLASS: 21020601 FAQ What level of precision can be expected from this clamping angle? The VRS-1206 from Vertex is specified with an accuracy of 0.005 mm, making it suitable as a precision reference for alignment and inspection tasks. Is the VRS-1206 suitable for heavy-duty machining environments? Yes, the alloy steel construction and a mass of 32.3 kg provide stability and damping that are advantageous in many machining contexts. Can this component be used on standard machine tables and inspection benches? The dimensional envelope of 300 x 300 x 150 mm means the unit fits typical machine and bench layouts and integrates with common fixturing accessories. How does the material choice affect longevity and maintenance? Made from alloy steel, the Vertex unit balances hardness and toughness for long service life; routine cleaning and corrosion protection are advised to maintain reference surfaces. Is the VRS-1206 traceable for quality documentation? Yes, the product is supplied with identifying data (SKU VRS-1206 and GTIN 4061905096181) that can be recorded in inspection plans and process documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x280mm 90° Clamping Angle With T‑Slots M12, 400x400mm Table - Vertex
Take advantage of the combination of a true 90° clamping surface, M12 T-slots for flexible fixtures and a substantial footprint for stable setups; order the unit directly via Metav Werkzeuge or consult the team for application advice. BP22-40 Angle plate — Vertex 90° clamping with M12 T‑slots The BP22-40 is a robust 90° angle plate designed for precise right‑angle fixturing in machine shops and inspection benches Precision 90° clamping surface M12 T‑slots for flexible fixturing Measuring table 400 x 400 mm Solid base 400 x 280 mm Stable 90° support for repeatable setups A solid right‑angle support is fundamental for repeatable fixturing. This angle plate provides a true 90° reference surface that reduces setup time and helps maintain machining and inspection tolerances. Built to resist twist under load, the construction offers clear benefits for jigs, fixtures and measurement tasks where precision and repeatability are decisive. The sturdy mass improves vibration damping, contributing to more consistent results across production runs. Flexible fixturing enabled by M12 T‑slots Integrated M12 T‑slots allow a wide range of clamping options without the need for bespoke plates. Contractors and workshop technicians can mount clamps, stop blocks and locator pins directly to the table to create customised fixturing arrangements. This modular approach shortens preparation time and increases machine uptime, delivering measurable efficiency gains. The T‑slot pattern supports both simple and complex setups while keeping the workpiece location stable during machining or metrology operations. Workshop‑ready dimensions that simplify handling and integration With a measuring table of 400 x 400 mm and a base of 400 x 280 mm, the unit balances a generous work area with a compact footprint for bench or machine integration. The design supports common vice and clamp sizes and fits easily on inspection benches or milling machine tables. A weight of 114.2 kg provides a low centre of gravity and improved stability for heavy fixturing, reducing the need for additional bolting in many shop environments. These characteristics make the plate suitable for repeatable production and quality inspection tasks where stable referencing is required. Confidence through proven manufacturing and practical application Produced by Vertex, the device follows established quality practices for clamping technology and is supplied with clear identification for compatibility with standard workshop tooling. The combination of a true right‑angle datum, a usable table area and universal T‑slot compatibility promotes operational reliability and reduces the risk of misalignment during critical operations. For workshops seeking dependable referencing without complex preparation, the plate delivers a practical balance of stability and flexibility. Contact Metav Werkzeuge in Emmerich for tailored application advice and to arrange supply of the Vertex BP22-40 angle plate via email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: BP22-40 GTIN: 4061905085154 Brand: Vertex Core specifications Measuring table: 400 x 400 mm Base (foot): 400 x 280 mm T‑slots: M12 Weight: 114.2 kg Special features 90° clamping angle T‑slots for versatile fixturing Suitable for machine bench and inspection use FAQ What size are the T‑slots on this angle plate? The angle plate is equipped with M12 T‑slots, allowing standard M12 clamping hardware to be used for fixture assembly with the Vertex BP22-40. What are the working table dimensions? The unit offers a measuring table of 400 x 400 mm, providing a broad reference area for fixturing and measurement tasks. How heavy is the plate and what does that mean for stability? The plate weighs 114.2 kg, which contributes to a low centre of gravity and improved stability for machining and inspection set‑ups. Is this plate suitable for use on a milling machine table? Yes, the combination of the 90° datum and M12 T‑slots makes the plate suitable for bench or machine table clamping and typical workshop fixturing operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400x300mm 90° Clamping Angle With M16 T-Slots, 400x400mm Table, 111.2kg - Vertex
Take advantage of a precision 90° clamping solution with integrated T-slots and a substantial base for vibration-free set-ups; the unit’s heavy mass ensures exceptional stability while the M16 T-slots permit standardised clamping hardware. Order the BP22-840 angle plate directly via Metav Werkzeuge or consult the specialists if clarification is required. BP22-840 angle plate by Vertex — 90° with M16 T-slots A robust BP22-840 angle plate engineered for accurate 90° clamping in machining and metrology environments. 90° angle plate with T-slots T-slot size M16 Large base 400x300 mm Measuring table 400x400 mm Precise right-angle set-ups that cut cycle time Accuracy in fixturing translates directly into fewer reworks and more predictable cycle times. The 90° orientation of this angle plate provides a reliable datum for perpendicular faces, while the integrated T-slots accept commonly used fixtures and clamps, giving flexibility for a wide range of workpiece sizes. The 400 x 300 mm base and separate 400 x 400 mm measuring table enable both stable machining and inspection workflows on one support, reducing part transfers. Together these attributes minimise alignment checks and support a smoother production flow for batch and single-piece work. Stability and durability to protect surface quality Mass and geometry matter when surface finish and dimensional accuracy are critical. At 111.2 kg, the clamping unit dampens vibration and resists movement under cutting forces, so workpieces remain true to position during milling, drilling or inspection operations. The solid construction reduces the risk of chatter marks and helps maintain consistent tolerances across runs. This stability not only preserves component quality but also lowers downstream correction costs, contributing to a more economical production process. Compatibility with standard workshop tooling for flexible workflows Built with workshop integration in mind, the slotted configuration accommodates M16 fastenings, enabling use with a wide selection of clamps, bolts and locating elements. The combination of a sizeable foot plate and a dedicated measuring surface simplifies the transition from machining to measurement without the need for complex re-fixturing. For operations that demand traceability and repeatability, the angle plate supports systematic set-ups that align with inspection routines and fixture libraries, ensuring that workholding remains repeatable across shifts and operators. For specification guidance and supply via Metav Werkzeuge — including procurement advice and delivery options from Emmerich — contact Metav Werkzeuge’s team of application specialists to discuss how this Vertex angle plate fits existing fixtures and measurement processes Technical Data SKU: BP22-840 GTIN: 4061905086533 Manufacturer: Vertex Core specifications Orientation: 90° Foot/base: 400 x 300 mm Measuring table: 400 x 400 mm Weight: 111.2 kg T-slot: M16 ECLASS: 21020601 Features & compatibility Integrated T-slots for modular clamping Designed for stable machining and inspection set-ups Compatible with standard M16 clamping hardware FAQ What is the primary purpose of the angle plate? The BP22-840 angle plate is designed to establish a precise 90° datum for machining and inspection, enabling stable fixturing and repeatable set-ups. Which T-slot size is provided, and what does that mean for fixtures? The unit features M16 T-slots, which accept widely used M16 bolts and clamps, allowing compatibility with common workshop clamping systems. Are there separate surfaces for machining and measurement? Yes, the product includes a 400 x 400 mm measuring table in combination with a 400 x 300 mm base to streamline transitions between machining and inspection tasks. How does the weight of the unit influence performance? At 111.2 kg, the mass increases stability and reduces vibration, which supports better surface finish and more consistent dimensional results during cutting operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500x350mm Angle Plate 90° With T-Slots M12, 500x500mm Top Plate, 184 kg - Vertex
Take advantage of the combination of robust stability and versatile fixturing to reduce setup time and ensure repeatable results; order the angle plate directly via Metav Werkzeuge or consult our specialists for specification support. Vertex BP22-50 90° Angle Plate with M12 T-slots A 90° angle plate with T-slots, the BP22-50 serves as a stable workholding and inspection platform for machine shops and metrology benches. Massive 184 kg mass for superior stability M12 T-slots for secure, standardised fixturing Measuring table 500 x 500 mm for larger components Base footprint 500 x 350 mm for firm mounting Stability that improves machining accuracy The BP22-50 angle plate delivers notable stability through its substantial mass of 184 kg, which reduces vibration during machining and inspection. This inherent damping supports tighter tolerances and fewer rejects by keeping the workpiece motionless relative to the cutting tool or measuring probe. In practical terms, the solid mass shortens settling times after clamping and contributes to consistent results across batch runs. The heavy construction therefore directly benefits throughput and process reliability in production environments where repeatability matters. Versatile fixturing for diverse applications Equipped with M12 T-slots, the unit allows secure and flexible attachment of clamps, locators and custom fixtures. The 500 x 500 mm measuring table provides a generous work area while the 500 x 350 mm base gives a compact footprint for mounting to milling or inspection tables. The T-slot arrangement supports standardised tooling interfaces, simplifying fixture transfers between machines and reducing set-up complexity. For users unfamiliar with T-slot nomenclature: the slots accept standard T-bolts and clamping elements, enabling rigid, repeatable clamping without specialist hardware. Designed to integrate with quality workflows As a precision workholding element, the plate minimises alignment effort and supports rapid inspection cycles when paired with gauges or microscopes. The orthogonal 90° faces are suitable for squaring and multi-axis setups, helping to reduce repositioning steps in measurement routines. By providing a dependable datum and secure clamping points, the component helps to shorten cycle times and lower rework rates — an efficiency gain that pays back across production batches. The robust platform also eases the implementation of standard operating procedures for fixture setup and quality control. Contact Metav Werkzeuge for a detailed mounting checklist and to arrange prompt delivery of the Vertex BP22-50 from our Emmerich quality hub Technical data Article number: BP22-50 GTIN: 4061905087837 Brand: Vertex Facts Weight: 184 kg Measuring table: 500 x 500 mm Base footprint: 500 x 350 mm T-slot size: M12 ECLASS: 21020601 Special features 90° orientation with T-slots Suitable for precision workholding and inspection Image available: bp22-30-main.jpg FAQ What materials can be clamped on this angle plate? The Vertex BP22-50 angle plate accepts a wide range of component materials; the plate itself provides a stable datum for clamping metals, plastics and composite parts using standard T-slot fixtures. How do the M12 T-slots benefit fixture selection? M12 T-slots on the BP22-50 enable the use of commonly available T-bolts and clamp systems, allowing straightforward fixture design and interchangeability across machines. Is the plate suitable for use on measuring tables and inspection benches? Yes, the 500 x 500 mm measuring surface and rigid construction make the BP22-50 suitable for integration with measuring tables and inspection benches where dimensional stability is essential. Does the Vertex BP22-50 require special mounting hardware? No specialised hardware is required; standard T-slot bolts and clamps compatible with M12 are sufficient for secure mounting and fixturing. Can the plate help reduce setup time in production? By providing defined datum faces and secure T-slot anchoring, the angle plate shortens alignment and clamping steps, contributing to faster, more repeatable setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
500x500mm 90° Angle Plate With M16 T-Slots, 500x350mm Base - Vertex
Take advantage of the combination of robust build, precise 90° clamping and a large measuring surface to streamline setup and inspection workflows. Order the angle plate directly via Metav Werkzeuge or contact the consultants for tailored advice. Angle plate BP22-850 – 90° clamping angle plate with M16 T-slots, Vertex The Angle plate BP22-850 is a 90° clamping plate designed for secure fixturing and measurement tasks in production and inspection environments. Heavy-duty 184 kg construction 90° clamping surface with M16 T-slots 500 x 500 mm measuring table 500 x 350 mm solid base Engineered mass for vibration damping and repeatable accuracy The considerable mass of 184 kg provides a stable foundation that reduces vibration during machining and inspection, which directly improves measurement repeatability and surface finish quality. By increasing inherent rigidity, the heavy construction helps to maintain positional accuracy when fixtures and components are clamped to the face. For shops where repeatable setups save time and rework, this solid build reduces the need for compensating fixtures and shortens setup cycles. Versatile fixturing via M16 T-slots for efficient workflows The 90° face is fitted with T-slots sized for M16 clamping elements, enabling modular and secure attachment of clamps, stops and bespoke fixtures. The slot pattern supports common clamping systems used across tooling departments, allowing rapid reconfiguration between jobs. For users unfamiliar with the specification, M16 denotes the thread size for the clamping studs; compatibility with standard hardware ensures easy integration into existing tooling inventories without special adaptors. Generous footprint and dedicated measuring surface for inspection tasks A 500 x 350 mm solid base combined with a 500 x 500 mm measuring table gives a broad, flat platform for component support and probe access during metrology checks. The larger table area simplifies alignment and permits the simultaneous staging of multiple parts or gauges, reducing movement between operations. The layout is particularly beneficial where coordinate measuring or optical inspection needs a stable reference surface close to the workholding plane. Built for shop-floor resilience and straightforward integration Constructed for industrial use, the fixture plate adapts to production and laboratory settings where durability matters. The combination of a 90° clamping face and standardised T-slots makes it suitable for both machining setups and inspection benches, bridging the gap between workshop fixturing and measurement tasks. The design supports a pragmatic workflow: stable clamping, clear access for tooling, and a defined table area for gauges and fixtures. Contact Metav Werkzeuge for specification checks and procurement support for the Vertex Angle plate BP22-850; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery from Emmerich. Technical data SKU: BP22-850 GTIN: 4061905086137 ECLASS: 21020601 Manufacturer: Vertex Core specifications Weight: 184 kg Base dimensions: 500 x 350 mm Measuring table: 500 x 500 mm T-slot/thread size: M16 Special features 90° clamping angle T-slots for modular fixturing Suitable for production and inspection environments FAQ What applications is this angle plate suitable for? The Vertex Angle plate BP22-850 is suitable for workholding during machining, set-up fixtures and metrology tasks where a rigid 90° reference and large measuring surface are required. What are the T-slot specifications on the face? The clamping face is equipped with T-slots designed for M16 clamping elements, allowing use with standard studs, clamps and modular fixtures. How does the plate weight affect performance? At 184 kg, the mass of the plate provides damping and rigidity, improving stability under load and enhancing repeatability for machining and inspection operations. What are the footprint and table dimensions? The product features a 500 x 350 mm base and a 500 x 500 mm measuring table, offering a substantial platform for both fixturing and gauge placement. Is the plate compatible with common clamping systems? Yes; the M16 T-slots are compatible with widely used clamping hardware, enabling straightforward integration with existing tooling sets and reducing the need for customised adaptors. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
630x450mm Angle Plate 90° With T-Slots M12, 630x630mm Table, 316 kg - Vertex
Take advantage of the combination of robust stability, precise 90° alignment and versatile M12 T‑slot fixturing to reduce set-up time and improve process reliability on the shop floor; order directly via Metav Werkzeuge or contact our consultants for tailored advice. BP22-60 Angle Clamping Fixture — 90° face with M12 T‑slots, 630×630 mm table | Vertex The BP22-60 is a 90° angle clamping fixture intended for heavy-duty workholding on machining and inspection tables, offering stable, repeatable positioning for demanding industrial applications. 90° alignment for precise positioning M12 T‑slots for standard clamping systems Large 630×630 mm work table for versatile setups 316 kg heavy base for reduced vibration Reliable stability for high-precision operations A substantial base mass improves resistance to cutting forces and reduces vibration, which directly benefits dimensional stability and surface finish. With a 316 kg base and a 630×630 mm work table, the unit provides a stable platform that lowers the risk of chatter and rework. The heavy construction is especially useful for stationary machining and metrology tasks where repeatability and positional integrity influence final part quality. Flexible fixturing that speeds up set-up Integrated T‑slots M12 enable the use of industry-standard clamping elements for a wide range of fixture configurations. The slot pattern supports modular fixturing, allowing secure mounting of stop blocks, clamps and custom fixtures without specialised adaptors. This combination of a standardised clamping interface and a large surface area shortens changeover times and enhances throughput by enabling consistent and rapid repositioning of workpieces. Designed for integration and dependable workflows The 90° clamping face and generous table proportions make the product suitable for combining inspection and machining set-ups on a single base, reducing handling and potential measurement error between operations. Built to suit workshop environments, the fixture supports a workflow focus on efficiency and quality assurance, contributing to lower scrap rates and a steadier production flow. Delivered and stocked via Metav Werkzeuge, the component sits behind a European quality filter to ensure reliable supply and traceable origin. Contact Metav Werkzeuge for expert guidance on selecting the right Vertex BP22-60 angle clamping fixture and to discuss compatible clamping kits for your process requirements Technical Data Article number: BP22-60 GTIN: 4061905086649 Brand: Vertex eClass: 21020601 Facts Table dimensions: 630×630 mm Base footprint: 630×450 mm Weight: 316 kg T‑slot size: M12 Special features 90° clamping face for perpendicular setup M12 T‑slots for standardised clamping elements Heavy‑duty construction for vibration damping Suitable for machining and inspection fixtures FAQ What machines and applications suit this angle clamping fixture? The BP22-60 from Vertex is suitable for milling and inspection tables and for general workshop workholding where a stable 90° reference face and large mounting area are required. How does the weight affect machining performance? The 316 kg mass of the base provides damping that reduces vibration and improves cutting results; this makes the BP22-60 particularly valuable for heavy cutting and precision measuring tasks. Which clamping elements are compatible with the T‑slots? The T‑slots accept standard M12 clamping components, allowing the use of widely available clamps, stop blocks and modular fixturing systems with the BP22-60. Is the fixture suitable for combined inspection and machining set-ups? Yes, the 630×630 mm table and perpendicular clamping face support combined inspection and machining workflows, helping to minimise handling and measurement deviation. What basic maintenance is required? Routine cleaning of the T‑slots and protection from swarf and coolant is recommended to preserve repeatability and prevent premature wear of the clamping surfaces. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
630x630mm Angle Plate 90° With M16 T-Slots, 630x450mm Base - Vertex
Take advantage of the combination of 90° accuracy, 304 kg mass for vibration damping and M16 T-slots to ensure stable, repeatable fixturing in inspection and machining environments; order the BP22-860 angle plate directly via Metav Werkzeuge or ask our consultants if needed. BP22-860 90° Angle Plate with T-slots by Vertex The BP22-860 is a robust 90° angle plate designed for secure workholding and precision alignment in metrology and machining set-ups. 90° precision with T-slots 630x630 mm working table 304 kg mass for exceptional stability M16-compatible T-nuts Guaranteed rigidity for precise measurement and machining A heavy workholding solution provides measurable benefits: the substantial 304 kg mass reduces vibration and movement during cutting or inspection, which in turn improves repeatability and surface integrity. Built as a right-angled reference, the 90° geometry gives a stable datum for squaring and aligning components. This combination of mass and geometry is especially valuable when high-accuracy positioning is required for inspection stages or when transferring setups between machine and measuring stations. Versatile fixturing that saves set-up time The integrated T-slots accept standard clamps and fixtures via M16 T-nuts, enabling modular clamping patterns across the 630x630 mm working surface. This adaptability reduces the need for bespoke fixtures and shortens set-up cycles, delivering a measurable efficiency gain in multi-part production runs. Practical flexibility is provided without sacrificing positional security, so repeatable clamping and consistent datum referencing are straightforward to achieve. Stable base and compact footprint for workshop integration A compact base of 630x450 mm supports the angle plate while conserving bench space and simplifying installation. The stable foundation allows the plate to be used directly under coordinate measuring devices, height gauges or during light milling operations where a steadfast reference is essential. Manufactured by Vertex, the design focuses on enduring stability and compatibility with standard workshop fixturing, making it suitable where precise alignment and reliable clamping are non-negotiable. For fast availability of the Vertex BP22-860 and expert advice from Metav Werkzeuge’s Emmerich team on integrating this angle plate into existing workflows, contact Metav Werkzeuge today for tailored consultation and supply options. Technical data Article number: BP22-860 GTIN: 4061905086670 Manufacturer: Vertex eCl@ss: 21020601 Core measurements Mass: 304 kg Table: 630x630 mm Base (foot): 630x450 mm T-nut size: M16 Design and features 90° angle plate with T-slots Suitable for sturdy workholding and inspection set-ups SKU: BP22-860 FAQ What applications is this angle plate suited for? The BP22-860 angle plate by Vertex is suited for precision fixturing in inspection, assembly and light machining where a stable 90° reference and vibration damping are required. Which clamping hardware fits the T-slots? The T-slots accept standard clamps using M16 T-nuts; typical workshop clamping elements compatible with M16 threads are suitable for secure fixturing. How large is the usable working surface? The working surface measures 630x630 mm, providing ample area for multi-part fixtures or larger components that require a right-angled datum. Does the plate require a special foundation? No special foundation is required, but the 630x450 mm base and the plate’s 304 kg mass mean stable, flat bench support is recommended to fully benefit from its vibration-damping properties. Is the product suitable for coordinate measuring machines? Yes. The plate’s rigid 90° geometry and mass make it suitable as a stable reference for measurement tasks and for supporting parts during coordinate measuring procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75x100x75mm Precision Angle Clamp, ±0.005mm Accuracy, Alloy Steel 2.2kg - Vertex
Combining 0.005 mm metrological accuracy with a robust alloy steel design and a compact 75 x 100 x 75 mm footprint delivers repeatable, space‑efficient fixturing for precision machining and inspection. Order the VRS-33 directly via Metav Werkzeuge or consult our experts for application advice VRS-33 — Precision clamping angle, 0.005 mm accuracy (Vertex) the VRS-33 is a precision clamping angle designed for stable right‑angle fixturing in small‑part machining and metrology applications High accuracy 0.005 mm tolerance Robust alloy steel construction Compact 75 x 100 x 75 mm footprint Stable 2.2 kg mass for vibration damping Consistent tolerances for finished parts The VRS-33 provides a declared 0.005 mm accuracy, which translates into reliable squaring and repeatability when setting up workpieces for milling, drilling or inspection. This level of precision reduces the need for iterative adjustments on the machine and shortens setup cycles. The stated tolerance should be interpreted as the maximum deviation under normal operating conditions; in practice, the fixture supports high‑precision tasks where controlled geometries and consistent datum alignment are essential. Explanation of the figure: 0.005 mm denotes the permissible deviation from true 90° after manufacturing and quality control. Durable construction that supports process stability Manufactured from alloy steel, the unit combines structural rigidity with long service life. The dense material contributes to a higher mass for passive damping, which helps reduce vibrational influence during cutting operations and contributes to consistent finishes. The design focuses on secure clamping and stable contact surfaces; the construction therefore benefits both short production runs and repetitive tasks where fixture wear could otherwise affect accuracy. The robust build also eases handling during frequent mounting and demounting. Space-saving design with easy integration With compact dimensions of 75 x 100 x 75 mm and a mass of 2.2 kg, this clamping angle is suited to confined set‑ups and multi‑fixture arrangements on smaller machine beds. The reduced footprint allows closer packing of workholding devices while maintaining stable support for small to medium components. The moderate weight provides sufficient inertia for vibration damping without imposing excessive load on positioning stages or rotary fixtures. When paired with complementary tooling, the unit supports versatile fixturing strategies without consuming valuable bench or table space. Contact Metav Werkzeuge for tailored application advice and availability from our Emmerich stock: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: VRS-33 GTIN: 4061905083150 Manufacturer: Vertex Material: alloy steel Accuracy: 0.005 mm Dimensions: 75 x 100 x 75 mm Weight: 2.2 kg eClass: 21020601 Facts Accuracy: 0.005 mm Weight: 2.2 kg Dimensions: 75 x 100 x 75 mm GTIN: 4061905083150 Special features Product type: precision clamping angle Manufacturer: Vertex Compact, high‑rigidity design FAQ What level of angular accuracy can be expected from this clamping angle? The VRS-33 offers an indicated angular accuracy of 0.005 mm, providing high repeatability for right‑angle fixturing in both machining and inspection contexts. Which material is the VRS-33 made from and why does it matter? Constructed from alloy steel, the VRS-33 delivers structural rigidity and improved damping compared with lighter materials, which supports stable machining and longer service life. Is the VRS-33 suitable for use on smaller machine tables? Yes, the compact 75 x 100 x 75 mm format and 2.2 kg mass make the VRS-33 well suited to confined set‑ups and multi‑fixture arrangements on smaller tables. How does the clamping angle contribute to shorter setup times? By providing a precise, repeatable datum, the VRS-33 reduces the need for iterative alignment and corrective machining, accelerating the transition from setup to production. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
800x800mm Angle Plate 90° With T-Slots M12, 800x550mm Foot, 577 kg - Vertex
Take advantage of the 90° T-slot configuration and the large 800×800 mm measuring surface to secure heavy, vibration-sensitive workpieces with confidence; for reliable supply and tailored delivery, order via Metav Werkzeuge or consult our product specialists. BP22-80 angle plate — 90° clamping plate with M12 T-slots, large 800×800 mm table (Vertex) The BP22-80 angle plate provides a rigid 90° reference plane for fixturing and inspection in industrial workshops and metrology setups, designed for stable positioning and repeatable alignment. 90° precision angle plate with M12 T-slots Measuring table 800×800 mm Stable base 800×550 mm footprint Substantial mass 577 kg for vibration damping Stable reference for repeatable setups and quicker throughput The heavy-duty construction creates a stable reference plane that reduces setup variability and shortens inspection cycles. The significant mass of 577 kg increases inertial damping, which stabilises mounted parts during measurement or machining, translating into fewer re-clamps and higher process throughput. The M12 T-slots permit modular fixturing with standard clamping hardware, enabling efficient transitions between jobs while maintaining positional accuracy. Large working surface that integrates into existing workflows A broad 800×800 mm table surface provides ample room for common components and assemblies, while the 800×550 mm base footprint ensures a manageable mounting area on workshop tables or measuring stands. The deep T-slots accept commonly used M12 fixtures and locating elements, which simplifies integration with existing tooling and reduces the need for custom adapters. This results in shorter lead times from setup to measurement and a smoother production flow. Robust design that supports precision and long-term reliability Precision-ground faces deliver the orthogonal relationship necessary for repeatable measurements and machining references. The T-slot arrangement, coupled with the plate's mass, improves resistance to external vibration and handling disturbances—an advantage when consistent geometry control is required. Manufactured under the Vertex name, the component is built for continuous industrial use, offering a predictable lifecycle that supports planning and maintenance schedules. Practical benefits for inspection and clamping applications By combining a true 90° datum with standard M12 clamping compatibility and a substantial working area, this fixture reduces the number of bespoke setups and potential alignment errors. The result is improved process reliability and measurable time savings during inspection and production runs. For workshops seeking a durable, low-maintenance fixturing solution, this component delivers clear operational gains without complex adaptation. Choose the Vertex BP22-80 for robust, repeatable fixturing and contact Metav Werkzeuge in Emmerich for delivery coordination and tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BP22-80 GTIN: 4061905085963 eClass: 21020601 Facts Measuring table: 800×800 mm Base footprint: 800×550 mm Weight: 577 kg T-slot size: M12 Special features 90° clamping angle with T-slots Designed for fixturing and inspection tasks Standard M12 bolt compatibility Brand: Vertex FAQ What are the main dimensions and mass of the BP22-80? The BP22-80 angle plate has a measuring surface of 800×800 mm, a base footprint of 800×550 mm and a mass of 577 kg. Which clamping hardware is compatible with the T-slots? M12 bolts and standard M12 clamping elements are compatible with the BP22-80's M12 T-slots, enabling the use of common clamping kits and locating parts. Is the BP22-80 suitable for precision inspection tasks? Yes; the 90° reference faces and stable mass of the BP22-80 make it suitable as a datum for inspection and alignment where repeatability is essential. How does the plate's weight affect measurements? The substantial weight of 577 kg increases vibration damping and stabilises mounted workpieces, which improves measurement consistency and reduces the risk of movement during inspection. Can the angle plate be integrated into existing workshop setups? The plate's standard M12 T-slots and defined footprint allow straightforward integration with common workshop tables and modular fixturing systems, reducing the need for custom adapters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Angle plate 90° with T-slots
Technische Daten: Bezeichnung: Aufspannwinkel VHM Gewicht: 59,2 kg - 577 kg T-Nut: M12 bis M16 Messtisch: 300x300mm bis 800x800mm Fuß: 300x220mm - 800x550mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: VERTEX, der größte Hersteller für Maschinenteile in Taiwan, hat seit seiner Gründung im Jahr 1978 eine führende Position in der Branche eingenommen. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen und den steigenden Anforderungen der Kunden gerecht zu werden. Durch kontinuierliche Investitionen in Forschung und Entwicklung bleibt VERTEX innovativ und bietet innovative Designs an. Darüber hinaus zeichnet sich VERTEX durch eine beeindruckende Lagerverfügbarkeit aus, da 98% aller Artikel sofort verfügbar sind. Als vertrauenswürdiger Hersteller mit einem Fokus auf Qualität und Kundenzufriedenheit ist VERTEX bereit, die individuellen Anforderungen der Kunden zu erfüllen und ihnen hochwertige Maschinenteile zu liefern.
Präzisionsaufspannwinkel
Technische Daten: Bezeichnung: Präzisionsaufspannwinkel Vollhartmetall Material: legierter Stahl Genauigkeit: 0,005 mm Abmessung: 100x100x100mm bis 75x100x75mm Gewicht: 2,2 kg - 32,3 kg Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Präzisionsaufspannwinkel höhenverstellbar und drehbar
Technische Daten: Bezeichnung: Präzisionsaufspannwinkel Vollhartmetall Gewicht: 15 kg bis 18,1 kg T-Nut: M12 Messtisch: 100x200mm bis 126x250mm Fuß: 110x182mm Höhe: 133mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Set up accurate 90° workpieces fast
Angle plates, also known as angle clamps or clamping angles, are versatile workholding tools for securing workpieces at precise angles. Designed for repeatable fixturing, adjustable angle plates allow rapid adaptation to different machining tasks while maintaining the rigidity required for high-quality results.
Why angle plates matter in production and repair
In machining, fabrication and model making, reliable workholding determines final accuracy. Angle plates hold parts securely for drilling, milling or welding operations, reducing vibration and ensuring perpendicularity. Mechanically, they provide fixed reference faces and clamping points; adjustable variants permit tilt and indexing so one fixture covers multiple set-ups, cutting changeover time and increasing throughput.
Key advantages that improve shop performance
- adjustable angle for flexible set-ups and reduced fixture inventory
- stable clamping that minimises vibration and improves surface finish
- repeatable accuracy for consistent hole positions and alignments
- reduced set-up and changeover time, increasing productivity
- suitable for diverse tasks: drilling, milling and welding
Metav — practical partner for precision workholding
Metav positions itself as the pragmatic choice for workshops and industry that need dependable measuring and workholding solutions. With decades of expertise and a comprehensive range, Metav combines technical competence with logistics from its Emmerich hub. Over 48,000 customers and a stock of more than 250,000 products underline Metav’s capacity to supply the right angle plates and complementary accessories while reducing supplier complexity.
If selection or sizing is unclear, Metav’s technical team provides application-focused advice to ensure the chosen angle plate matches the machining task and clamping strategy.
Technical data at a glance
- adjustable angle, variable positioning
- use cases: drilling, milling, welding
- applications: machine construction, metalworking, model making
- recommended maintenance: regular cleaning; rust prevention treatments; light lubrication of moving parts; dry storage; periodic accuracy checks
FAQ
How does an adjustable angle plate speed up set-up?
An adjustable angle plate reduces the need for multiple fixed fixtures by allowing quick reorientation of the workpiece. The angle plates' adjustability shortens fixture preparation and changeover, improving overall machining throughput.
Can angle plates be used during welding operations?
Yes. Angle plates provide rigid support and defined faces that help maintain alignment during welding. Use appropriate anti-rust and heat-protection practices to preserve accuracy.
What basic maintenance keeps an angle plate accurate?
Regular removal of chips and dust, application of rust inhibitors where necessary, light lubrication of moving parts and storage in a dry place. Periodic checks for squareness and re‑adjustment maintain long-term precision.
Which industries benefit most from angle plates?
Angle plates are valuable in machine construction, general metalworking and model making—any context that requires precise right-angle fixturing for machining or assembly.
Angle plates deliver the combination of flexibility and accuracy needed for reliable production results, making them a practical core element of any precision workshop.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com