Accurate radius measurement for precise metalworking and fabrication
Accurate radius measurement ensures components meet tight tolerances and improves fit and finish across jobs such as metalworking, construction and model making; using tools like a precision caliper, radius gauge or digital measuring device lets technicians verify curves and bends reliably. Radius measurement and its synonyms, such as curve measurement and fillet inspection, are essential when forming, bending or machining parts from materials like metal, wood or plastic to secure consistent assembly and long-term performance. Modern digital radius gauges provide quick readouts, data outputs and hold functions to support quality control and process documentation.
0,1-1,0mm Radienlehre Radienmesser 272 MAA 10 Blätter Fuji Tool
0,1-1,0mm Radienlehre Radienmesser 272 MAA 10 Blätter Fuji Tool
1000mm Digital Radius Gauge With 5 Interchangeable Bridges, 0.01mm Readout, In Carry Case - Metav IndustryLine
Benefit from precise radius inspection across the full 5–1000 mm range and a 0.01 mm resolution combined with five optimised measuring bridges for fast set‑up and repeatable results; order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Digital Radius Gauge M301.050.N – 5–1000 mm range, 0.01 mm resolution (Metav IndustryLine) Digital Radius Gauge M301.050.N is a handheld radius measuring instrument for inspection of round parts and bores, combining a specially adapted dial for direct reading with a digital display and five optimised measuring bridges Range 5–1000 mm for small to large radii Resolution 0.01 mm for high precision Five optimised measuring bridges included Special dial for direct reading Digital display with ABS and TOL functions Precise measurement across an exceptionally wide span The instrument covers a broad measuring span from 5–1000 mm, enabling one tool to service both small bores and large radii on housings or shafts. The 0.01 mm readout offers fine resolution suitable for routine quality control where traceable step changes matter, while the integrated special dial provides an immediate analogue feel for quick assessment. The combination of a tactile dial and a digital readout reduces interpretation errors and speeds inspection cycles, translating technical accuracy into measurable throughput improvements on the shop floor. Designed for efficient workshop inspection and data capture Built for productive metrology workflows, the device features a clear digital display with 0/ON/OFF, ABS, TOL, mm/inch and MODE controls for rapid unit changes and pass/fail checks. A dedicated RB7 data output allows straightforward transfer of readings into documentation or measurement software, simplifying traceability. Five optimised measuring bridges (10, 20, 30, 60, 100) facilitate fast adaptation to varying diameters without time‑consuming re‑fixturing. At approximately 0.67 kg, the instrument is lightweight enough for bench or mobile inspection while remaining robust for repeated daily use. Built for dependable results and streamlined quality routines The gauge is intended for production and inspection environments where consistent, repeatable measurement of radii is required. The selectable tolerance function supports quick acceptance decisions, reducing downstream rework, and the blend of analogue dial and digital electronics gives operators both intuitive control and documented accuracy. As part of the Metav IndustryLine, the instrument aligns with a pragmatic approach to precision: making reliable metrology accessible to workshops and specialist suppliers without compromising on technical capability. Contact Metav Werkzeuge today to discuss the M301.050.N and secure the right configuration for your measurement tasks, or request advice from our consultants in Emmerich. Technical data Article number: M301.050.N GTIN: 4054469178554 Weight: 0.67 kg Measuring range: 5–1000 mm Resolution: 0.01 mm Facts Measuring range minimum: 5 mm Measuring range maximum: 1000 mm Number of measuring bridges: 5 Bridge sizes: 10, 20, 30, 60, 100 Special features Special dial for direct reading Digital display with 0/ON/OFF, ABS, TOL, mm/inch, MODE RB6 model Data output RB 7 Supplied with several optimised measuring bridges FAQ What radii can be measured with this instrument? The M301.050.N measures radii from 5 to 1000 mm, using five optimised measuring bridges to cover small bores through to large curved surfaces. What resolution and readout functions are available? The instrument provides a 0.01 mm resolution and a digital display with ABS, TOL, mm/inch and MODE functions for flexible readout and tolerance checking. Are measuring bridges included? Yes, the M301.050.N is supplied with five optimised bridges (10, 20, 30, 60, 100) to speed set‑up and adapt to different part sizes. Can measurement data be exported? The device includes an RB7 data output for export of readings to measurement software or data loggers to support traceability. Which applications suit this radius gauge? The gauge is suitable for inspection of round parts and bores in production and quality control environments, where repeatable numeric readouts and quick tolerance checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11200mm Dial Gauge With Colour Touchscreen Output Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of 1 µm resolution, an extended 100–11,200 mm range and seamless Wireless + USB data transfer to measure large radii with fewer setups and reduced rework; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Dial indicator (electronic) with microcomputer — Microtech Metrology, 100–11,200 mm range, 1 µm resolution A high-performance dial indicator with integrated microcomputer designed for precise external measurements of large radii and long components across production and inspection environments. 1 µm resolution for fine measurement Measurement range up to 11,200 mm Wireless and USB data output Delivered calibrated to ISO 17025 Accurate measurement across large radii to cut setup time The instrument combines a 100–11,200 mm measuring range with a 0.001 mm (1 µm) reading, allowing one device to replace multiple gauges when checking large-diameter parts or long curved surfaces. This reduces repositioning, shortens inspection cycles and lowers the risk of cumulative error from repeated transfers. The long-range capability is particularly useful in workshop and toolroom settings where drums, rings, large bearings or mould components require reliable external measurement without elaborate fixturing. Modern onboard processing and straightforward data flow Equipped with an integrated microcomputer and a 1.5" colour touchscreen, the unit processes measurements at source and presents values clearly for rapid decision-making. Wireless and USB outputs enable direct transfer to quality systems or spreadsheets, cutting manual transcription errors and accelerating reporting. On-instrument calculations and memory functions support repeat testing procedures, so throughput increases while inspection traceability is maintained. Robust design for shop-floor use and accredited calibration Built for repetitive use on the shop floor, the device offers a practical combination of digital ergonomics and industrial reliability; the design is optimised for external measurements of large components and for straightforward integration into existing metrology workflows. The instrument is supplied fully calibrated to ISO 17025, including a calibration certificate, which assures traceable accuracy and simplifies acceptance into formal quality systems. This certification supports both routine production control and laboratory-level verification. For precise large-radius measurement solutions and ISO 17025-calibrated delivery, contact Metav Werkzeuge to secure the Microtech dial indicator and discuss integration into existing inspection processes. Technical data Article number: 1250531156 GTIN: 4061905042362 Manufacturer: Microtech Metrology eCl@ss: 21170308 ETIM: EC003591 Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Facts Measurement range: 100–11,200 mm Resolution: 0.001 mm Bridge: 1200 Digital: yes Special features Delivered calibrated to ISO 17025 (certificate included) Suitable for external measurements Integrated microcomputer for onboard processing Wireless and USB connectivity FAQ What measurement range does the instrument cover? The instrument covers a measuring span from 100 mm up to 11,200 mm, making the Microtech electronic dial indicator suitable for very large external radii and long components. What is the resolution and typical accuracy of the device? Resolution is 0.001 mm (1 µm); the high display resolution combined with ISO 17025 calibration ensures traceable, workshop-to-laboratory reliability for the dial indicator (Microtech, SKU 1250531156). How can measurement data be exported from the instrument? Measurement values can be exported via the built-in Wireless interface or by USB, allowing direct import into quality management systems or data-logging software. Is a calibration certificate supplied with the device? Yes, the instrument is supplied fully calibrated to ISO 17025 and delivered together with the corresponding calibration certificate for immediate use in accredited processes. Which measurement tasks is this device optimised for? The tool is optimised for external measurements of large components such as rings, bearings, mouldings and shafts where a long measuring range and reliable traceability are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1250mm Radius Measuring Device Colour Touchscreen, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
Combine a 320–1,250 mm measuring range, traceable ISO 17025 calibration and wireless + USB data transfer to secure reproducible radius inspections and quicker process integration. Order the radius measuring device directly via Metav Werkzeuge or consult our specialists for application advice. Radius measuring device – Microtech Metrology, 320–1,250 mm range with colour touchscreen The Radius measuring device is a microcomputer‑controlled instrument for reliable external radius measurement on medium to long components, designed for workshop and production environments. Measuring range 320–1,250 mm Colour 2.4-inch touchscreen Wireless and USB data output Delivered calibrated to ISO 17025 Integrated microcomputer for rapid evaluation Reach and repeatability for larger components The instrument covers a broad 320–1,250 mm span, placing it in the long‑range class for calipers and gauges where profile stiffness and stable measurement over length matter. This reach reduces the need for multiple set‑ups when inspecting housings, large flanges or pipe radii, which shortens throughput times and lowers handling error. The long measuring span is paired with an industrial design that keeps the measuring geometry consistent, so results remain comparable across batches. Faster inspection workflows through digital integration An on‑board microcomputer and colour 2.4-inch touchscreen enable immediate visual feedback and simple parameter entry, while wireless and USB outputs allow direct transfer of measurement series to quality management systems. The high display responsiveness and digital data channels minimise manual transcription and accelerate traceability. With a reading resolution of 0.001 mm, the instrument supports tight documentation and seamless export of measured radii for statistical process control. Certified calibration for production quality The device is supplied fully calibrated to ISO 17025, including a calibration certificate, which simplifies audit preparation and supplier qualification. The stated variation of 1% accuracy provides a clear basis for tolerancing decisions when comparing measured radii to CAD or drawing specifications. Traceable calibration ensures that measurement results are defensible in internal inspections and when delivering parts to demanding customers. Practical design for everyday workshop use Built for external radius measurement in machine shops and toolrooms, the instrument combines digital convenience with a rechargeable battery for flexible deployment away from fixed power points. The intuitive interface cuts training time, while the solid electronics and connectivity options make it suitable for integration into routine inspection stations. The overall effect is reduced idle time during quality checks and faster feedback into the production process. For certified radius inspection and smooth system integration, order the Microtech Metrology radius measuring device via Metav Werkzeuge or contact our advisors at info@metav-werkzeuge.com or +49 2822 7131930 to find the optimal configuration for the application Technical data Article number: 1250711206 GTIN: 4061905452949 Manufacturer: Microtech Metrology Digital display: Colour 2.4‑inch touchscreen Data output: Wireless, USB Battery: Rechargeable Calibration: ISO 17025 (delivered with certificate) Facts Measuring range: 320–1,250 mm Resolution: 0.001 mm Accuracy: 1% Special features Integrated microcomputer for on‑device evaluation Suitable for external radius measurement Delivered fully calibrated to ISO 17025 Wireless data transfer for QC integration USB interface for direct export FAQ What measuring range does the radius measuring device cover? The device measures radii from 320 mm up to 1,250 mm, making it suitable for medium to long components in workshop and production settings. Is the instrument delivered calibrated and with documentation? Yes. The radius measuring device from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. Which data outputs are available for automated recording? Measurement results are output via wireless connection and USB, allowing direct integration with quality management systems and data collection software. What resolution and accuracy can be expected during inspection? The instrument offers a resolution of 0.001 mm with a specified variation of 1%, providing fine detail for dimensional verification and process control. Can the device be used away from a mains supply? Yes. The device has a rechargeable battery, enabling flexible use at inspection benches or in larger assembly areas without immediate mains access. For which applications is this radius measuring solution recommended? It is ideal for external radius measurement on components such as moulds, flanges, housings and pipework where a reach of up to 1,250 mm and documented calibration are required; the product SKU is 1250711206 for ordering reference. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
15,000mm Radius Gauge With 2.4" Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an exceptionally wide measurement range, reliable Wireless + USB data transfer and delivered ISO 17025 calibration for reproducible results across large components. The rechargeable power supply and colour touchscreen simplify on‑site operation and data capture. Order the radius measuring device directly via Metav Werkzeuge or ask our consultants for application support. Radius measuring device — Microtech Metrology, rechargeable, Wireless + USB, 2.4" touchscreen The radius measuring device from Microtech Metrology is designed for precise internal and external radius measurement across a very wide span of components in workshop and production environments. Wide measurement span 5–15,000 mm for very large radii ISO 17025 calibrated with certificate Colour 2.4" touchscreen with 0.001 mm readout Wireless and USB data export for automated logging Precise large‑scale measurement without workflow compromise The device delivers a measurement range of 5–15,000 mm, which places it in the mega/special category for long‑span inspection tasks (10,000–30,000 mm). This makes it suitable for large‑format components such as pipes, housings and segmented assemblies where conventional gauges cannot reach. The substantial span, combined with a 0.001 mm display resolution, enables consistent measurement of contours and radii while reducing the need for multiple instruments. The rechargeable power supply supports mobile use on the shop floor and the robust construction supports repeatable handling during longer inspection runs. Calibrated accuracy for traceable quality control Delivered fully calibrated to ISO 17025, the instrument includes a calibration certificate that documents conformity with laboratory standards. The stated accuracy range of 0.4–1% should be interpreted as a relative tolerance across the measuring span: larger radii produce proportionally larger absolute deviations. For production tolerance checks this means straightforward traceability and transparent error budgets when integrating the device into inspection plans. The ISO 17025 calibration underpins audits and helps ensure measured values are accepted across supply chains. Streamlined data capture and integration Data transfer is available via Wireless and USB, enabling direct export to inspection software or quality databases and avoiding transcription errors. The colour 2.4" touchscreen provides immediate visual confirmation of measured values and simple menu navigation, while the internal electronics support stable readings and rapid handover to downstream quality processes. Together, these features speed up batch checks and support automated logging for traceability without lengthy manual steps. Built for shop‑floor application and broad use cases Configured as a complete set, the device addresses both internal and external radius measurement needs, reducing tool changes and setup time. Its suitability spans heavy industry, vessel and pipe fabrication, gearbox housings and large moulds, where consistent radius control matters for fit and function. Manufactured by Microtech Metrology, the unit combines long‑range capability with a compact operator interface to balance reach and usability for inspection technicians and quality engineers alike. For tailored advice on Microtech Metrology's radius measuring device and delivery options, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss specification and lead times. Technical data Article number: 1250517007 GTIN: 4061905452277 Manufacturer: Microtech Metrology Facts Measurement range: 5–15,000 mm Resolution / reading: 0.001 mm Display: Color 2.4" touchscreen Accuracy: 0.4–1% (relative) Special features Data output: Wireless + USB Power: Rechargeable battery Delivered calibrated to ISO 17025 with certificate Set configuration included Suitable for internal and external radius measurement Colour touchscreen for direct operation FAQ What measurement span does the radius measuring device cover? The radius measuring device covers a range from 5 mm to 15,000 mm, making it suitable for very large radii and long‑span components. Is the instrument supplied with a calibration certificate? Yes, the device is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceable quality assurance. How are measured values exported from the instrument? Measured values can be transferred via Wireless or USB, enabling integration with inspection software and automatic logging to quality systems. What level of accuracy can be expected in practical use? The instrument specifies an accuracy range of 0.4–1%, which is a relative figure across the measuring span; absolute deviation increases with radius size and should be considered in tolerance planning. For which applications is this device most suitable? It is aimed at large‑component inspection such as pipes, housings, moulds and assemblies where internal and external radius measurement over long spans is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
15000mm Radius Measurement Device Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an exceptional measurement span, digital data transfer and accredited calibration for reliable inspection workflows; the device’s wide 40–15,000 mm range and rechargeable design speed up large-component checks while traceable certification increases process confidence. Order via Metav Werkzeuge or contact our consultants for application advice. Radius measuring device — Digital radius gauge with 40–15,000 mm range and 2.4" colour touchscreen (Microtech Metrology) The Radius measuring device is a precision instrument designed for internal and external radius measurement on large assemblies, providing a robust solution for inspection tasks in production, tooling and quality control environments. 40–15,000 mm measurement range 2.4" colour touchscreen display Wireless+USB data output Rechargeable battery operation Delivered with ISO 17025 calibration certificate Measure very large radii without compromise This instrument handles an extraordinary measurement span of 40–15,000 mm, which classifies it among heavy‑duty, large‑format radius gauges intended for oversized components. The extended reach reduces fixture changes and inspection steps when checking pipes, shafts, ring gears or large housings, therefore shortening measurement cycles and improving throughput. The substantial range is paired with a repeatable measurement resolution of 0.001 mm, allowing the device to bridge shop‑floor practicality and fine inspection detail without constant tool switching. Traceable accuracy built into routine inspection Delivering an indicated accuracy range of 0.4–1%, the gauge provides quantifiable measurement performance suitable for production control on large parts; results are supported by a full ISO 17025 calibration certificate included with delivery, ensuring traceability and acceptance in audit processes. This accredited calibration simplifies documentation for quality systems and reduces the administrative effort required to validate measurement capability for suppliers or subcontractors, making integration into formal inspection plans straightforward. Modern digital workflow for seamless data handling Equipped with a 2.4" colour touchscreen and Wireless+USB data interfaces, the unit enables rapid transfer of measured values into SPC, inspection software or custom spreadsheets. The touchscreen streamlines mode selection and setup, while wireless connectivity reduces cable clutter at the inspection station. The rechargeable battery ensures portability across large assemblies or on-site inspections without constant reliance on power leads, supporting efficient data capture and clearer traceability within production chains. Designed for workshop resilience and operator ease Constructed for repetitive use in industrial settings, the device balances robustness with ergonomic handling: controls are laid out for one‑hand operation while the display remains readable under workshop lighting. The instrument’s design reduces handling time for internal and external radius checks and minimises the need for elaborate fixturing. For organisations aiming to centralise precision measurement, this gauge offers a practical route to fewer measuring tools and faster inspection cycles, backed by the credibility of an accredited calibration. Contact Metav Werkzeuge to discuss application suitability for large‑format radius inspection with Microtech Metrology and to request the ISO 17025 calibration certificate on delivery Technical data Article number: 1250516007 GTIN: 4061905452260 Manufacturer: Microtech Metrology ECLASS: 21170308 Facts Measurement range: 40–15,000 mm Resolution: 0.001 mm Accuracy: 0.4–1% Display: Colour 2.4" touchscreen Data output: Wireless + USB Special features Rechargeable battery Delivered with ISO 17025 calibration certificate Suitable for internal and external radius measurement Digital instrument, touchscreen control Set configuration included FAQ What measurement span does the device cover? The device covers a measurement range from 40 to 15,000 mm, which allows inspection of very large components and assemblies using a single gauge. Is the instrument supplied with an official calibration certificate? Yes, the radius measuring device from Microtech Metrology is delivered with an ISO 17025 calibration certificate for traceable results. How are measured values transferred to a PC or inspection system? Measured values can be exported via the unit’s Wireless+USB interfaces for direct input into SPC or inspection software. Does the instrument support internal and external radius checks? Yes, the gauge is suitable for both internal and external radius measurement, designed for use on parts such as pipes, housings and large gears. What resolution and accuracy can be expected for measurements? The instrument offers a resolution of 0.001 mm with an indicated accuracy in the range of 0.4–1%, appropriate for large‑format inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2,000mm Radius Measurement Gauge Colour Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of long-range digital measurement, fast wireless data transfer and traceable ISO 17025 calibration for reliable radius inspection across production and quality control. Order the instrument directly via Metav Werkzeuge or request consultancy for integration into existing inspection routines. Radius Measuring Instrument — Digital radius gauge with colour touchscreen, Microtech Metrology The Radius Measuring Instrument is a precision device designed for internal and external radius measurement in workshop and production environments, combining a long measuring range with digital data output for process-capable inspections. Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibrated and certified Measurement range up to 2,000 mm Long-range control for large components The unit is engineered for measurements up to 2,000 mm, placing it in a long-range category suitable for sizable assemblies such as housings, large fixtures and pipe sections. With a resolution of 0.001 mm, the instrument captures fine changes in curvature while the stated accuracy of 0.4–1% provides a clear expectation of measurement uncertainty across the radius range. This combination of reach and sensitivity supports reproducible inspections where stability and repeatability over extended lengths are decisive for production quality. Fast digital workflow and secure data capture Operation is simplified by the 2.4" colour touchscreen, which presents readings clearly and reduces interpretation errors during routine checks. Data export is handled via Wireless and USB interfaces, enabling direct transfer to quality management systems and statistical process control software. The rechargeable power supply ensures uninterrupted shifts without frequent battery swaps, while the digital readout and transfer options reduce manual transcription and accelerate traceability of inspection records. Traceable calibration and practical workshop fit Delivered as a complete set with bridging options (10+40 mm) and supplied with an ISO 17025 calibration certificate, the device supports documented, audit-ready measurement routines. Designed for internal and external radius measurement, the construction balances rigidity and handling for workshop environments; the instrument is well suited to toolmaking, mould and die inspection, and component acceptance in aerospace or automotive contexts. The certified calibration and digital output make it a dependable choice for laboratories and production lines that require traceable results. For traceable, long-range radius inspections with Microtech Metrology hardware, contact Metav Werkzeuge in Emmerich for delivery details and technical advice on integration into existing inspection workflows. Technical data Article number: 1250512007 GTIN: 4061905452932 Manufacturer: Microtech Metrology Facts Measuring range: 5–2,000 mm Resolution: 0.001 mm Accuracy: 0.4–1% Display: Colour 2.4" touchscreen Data output: Wireless, USB Special features Digital instrument, rechargeable battery ISO 17025 calibration certificate included Suitable for internal and external radius measurement Bridge offset options: 10 + 40 mm Supplied as a set FAQ What is the maximum radius measurable with this instrument? The device measures radii from 5 mm up to 2,000 mm, suitable for large-format components and long-range inspections. Is the instrument delivered calibrated and traceable? Yes. The Radius Measuring Instrument is supplied with an ISO 17025 calibration certificate for traceable inspection documentation. Which data interfaces are supported for export? Measurement data can be exported wirelessly or via USB for direct integration into quality and SPC systems. What resolution and accuracy can be expected? The readout resolution is 0.001 mm and the instrument’s accuracy is specified at 0.4–1%, depending on the measured radius. For which applications is this instrument intended? Designed for internal and external radius measurement, the gauge is suitable for toolmaking, mould inspection, automotive and aerospace component checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
250-7500mm Radius Measurement Device Colour Touchscreen, Rechargeable, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of wide measuring range, simple data integration and traceable calibration to keep large-part inspection fast and reliable. Benefit from intuitive touchscreen control and wireless data transfer for seamless process documentation — order via Metav Werkzeuge or consult their specialists when needed. Radius measuring device – Microtech Metrology, wireless with 2.4" colour touchscreen The Radius measuring device is a precision instrument designed for internal and external radius measurement across very large components, providing a practical solution for inspection tasks from medium assemblies up to ultra‑long geometries. ISO 17025-calibrated measuring certificate included Wireless and USB data output for process integration 2.4" colour touchscreen for intuitive operation Rechargeable battery and robust large-range capability Measure large radii with laboratory-level traceability The instrument covers a measuring range of 250–7,500 mm, placing it in the Ultra‑Long range for radius inspection. This span makes the device suitable for large housings, pipes and segmented shafts where conventional gauges fall short. The delivered ISO 17025 calibration and accompanying calibration certificate establish full traceability for quality records and audits. The device’s quoted 0.4–1% accuracy and the fine 0.001 mm resolution support repeatable results across the measurement span, reducing rework and improving process reliability. Integrate measurement data into production workflows Equipped with both Wireless and USB data outputs and a clear 2.4" colour touchscreen, the instrument simplifies data capture and transfer to inspection software or a central quality database. This digital connectivity shortens inspection cycles and removes manual transcription errors, so documentation is consistent and ready for statistical process control. The combination of immediate digital readout and export capabilities speeds up decision-making on the shop floor and during incoming inspections. Robust design for workshop use and straightforward operation A rechargeable power supply provides mobility and removes the clutter of cables during large-part inspections. The tactile touchscreen and logical menu reduce training time and make the gauge accessible to operators with different experience levels. Mechanical design focuses on stability over extended lengths to limit bending errors, while internal and external measurement modes cover common radius geometries without additional fixtures. The result is a dependable instrument that balances accuracy with practical handling. Practical applications and operational benefits This radius gauge suits metrology labs, toolrooms, mould and die shops, pipe fabrication and heavy machining environments where large radii must be verified quickly and reliably. Traceable calibration and consistent data export support quality systems and supplier qualification processes. Investing in this digital measuring solution reduces inspection bottlenecks, increases throughput and provides documentation that supports continuous improvement initiatives. For purchases and technical advice on Microtech Metrology radius measuring devices, contact Metav Werkzeuge — Metav’s specialists in Emmerich can advise on specification fit and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 1250511117 GTIN: 4061905453182 Manufacturer: Microtech Metrology Category: Radienmessung Facts Measuring range: 250–7,500 mm Resolution/readout: 0.001 mm Accuracy: 0.4–1% Display: Colour 2.4" touchscreen Data output: Wireless and USB Special features Internal and external radius measurement ISO 17025 calibration with calibration certificate included Rechargeable battery power supply Digital instrument for large-part inspection FAQ How large a radius can this instrument measure? The device measures radii from 250 mm up to 7,500 mm, making it suitable for very large components and categorised in the ultra‑long range. Is the instrument supplied calibrated? Yes. The Microtech Metrology radius measuring device is ISO 17025 calibrated and supplied with a calibration certificate for traceable inspection records. What data interfaces are available for export? Measurements can be exported via Wireless connection or USB, enabling direct transfer into inspection software or quality documentation systems. Can it measure both internal and external radii? Yes. The instrument supports internal and external radius measurement, eliminating the need for separate gauges for the most common radius checks. What resolution and accuracy can be expected? The instrument provides a 0.001 mm resolution with an accuracy range of approximately 0.4–1%, depending on measurement conditions and radius size. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
32200mm Dial Indicator With Microcomputer For Large Radii, Colour Touchscreen, Wireless+USB, ISO 17025 - Microtech Metrology
The compact digital dial gauge combines a 1.5" colour touchscreen and Wireless + USB data output with an extensive measuring range, delivering traceable results for large-radius measurements; ISO 17025 calibration and a calibration certificate are included. Order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for specification matching. Digital Dial Gauge by Microtech Metrology — 1.5" colour touchscreen, Wireless + USB The Digital Dial Gauge is a precision instrument with a colour touchscreen, developed for large‑radius external measurements and seamless data integration in workshop and laboratory environments. 1.5" colour touchscreen display Wireless + USB data output ISO 17025 calibrated with certificate Wide measuring range up to 32,200 mm High precision with certified traceability The instrument delivers a resolution of 0.001 mm, enabling fine discrimination of dimensional changes in critical components. Supplied fully ISO 17025 calibrated, the unit arrives with a calibration certificate that provides traceability and supports quality documentation and audit processes. This level of documented accuracy reduces rework and supports reliable process control in inspection routines. Efficient data capture for modern production Equipped with Wireless + USB connectivity and a 1.5" colour touchscreen, the device simplifies measurement logging and transfer to inspection software or production databases. The intuitive display speeds up read‑out and reduces interpretation errors, while digital output options enable direct integration into existing data collection workflows, supporting lean documentation and faster decision cycles on the shop floor. Designed for large radii and external measurement tasks With a measuring range of 200–32,200 mm, the indicator is suitable for large‑format components and external surface inspection where extended reach is essential. The instrument is classified for external measurements and is built to retain stability across long spans, ensuring reproducible results for large shafts, rings or form features where conventional short‑range gauges fall short. Practical reliability for workshop and laboratory use Manufactured by Microtech Metrology, the indicator combines robust digital readout technology with practical handling features for routine quality control. The rugged electronics and clear display support continuous use in production environments, while the included calibration certificate and documented performance give procurement and quality teams the assurance needed for standards compliance and consistent measurement practice. Contact Metav Werkzeuge for a technical consultation and to request the ISO 17025‑calibrated dial gauge from Microtech Metrology Technical data Article number: 1250533356 GTIN: 4061905042607 Manufacturer: Microtech Metrology Category: Messuhren (Dial indicators) Core specifications Measuring range: 200–32,200 mm Resolution: 0.001 mm Display: Colour 1.5" touchscreen Data output: Wireless + USB Digital: yes Special features ISO 17025 calibration with certificate Suitable for external measurements Digital indicator with touchscreen readout SKU: 1250533356 FAQ What resolution does the instrument provide? The device offers a resolution of 0.001 mm, allowing fine measurement steps suitable for high‑precision inspection with the Microtech Metrology dial gauge (SKU 1250533356). Is the instrument supplied calibrated? Yes. The dial gauge is delivered fully calibrated and includes an ISO 17025 calibration certificate for traceable quality assurance. How are measurement results transferred to a PC or network? Measurements can be exported via Wireless + USB; the digital interface supports direct data capture into inspection software or logging systems. For which applications is this indicator best suited? The indicator is optimised for external measurements on large radii and long components, such as shafts, rings and form inspections where extended measuring range and traceable accuracy are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
40mm–2000mm Radius Measurement Device Touchscreen, Wireless+USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of extended reach, digital data transfer and certified calibration for reliable radius measurement across large components; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Radius Measuring Device by Microtech Metrology — Digital colour touchscreen & Wireless+USB The Radius Measuring Device is a precision instrument for internal and external radius measurement across moulds, castings and assemblies, designed for workshop and quality‑control environments. Digital colour touchscreen display Wireless and USB data output ISO 17025 calibrated with certificate Measuring range up to 2,000 mm Greater reach with stable handling The instrument’s measuring range of 40–2,000 mm places it in the Long category, which is intended for components that demand both reach and repeatability. The longer span is engineered to retain sufficient profile stiffness so that measurements across extended radii remain reproducible, reducing the need for repositioning. The rechargeable power source and intuitive colour touchscreen promote straightforward handling during repetitive inspection tasks, saving time on complex set‑ups. Traceable accuracy for quality assurance With a resolution of 0.001 mm and a stated variation of 0.70%, the device offers measurable improvement over basic gauges for large radii, making it suitable for production control and incoming inspection. Delivery includes a full calibration performed to ISO 17025 standards and a calibration certificate, ensuring traceability within accredited measurement processes. This certification supports audit requirements and simplifies documentation for quality management systems. Seamless data transfer and process integration Equipped with Wireless+USB outputs and a touch‑operated interface, the radius gauge integrates into digital workflows without complex adapters. Live transfer of measured values reduces transcription errors and speeds downstream analysis or SPC logging. Designed specifically for internal and external radius measurement, the instrument pairs mobility with connectivity to fit modern workshops that demand fast, verifiable results and straightforward data handling. For reliable, long‑range radius measurement with accredited calibration and modern connectivity, contact Metav Werkzeuge to secure the Microtech Metrology Radius Measuring Device and discuss delivery options. Technical data Article number: 1250511007 GTIN: 4061905452925 Manufacturer: Microtech Metrology Display: Touchscreen colour Data output: Wireless+USB Battery: Rechargeable Calibration: ISO 17025 certificate included Facts Measuring range: 40–2,000 mm Resolution / reading: 0.001 mm Accuracy / variation: 0.70% Bridge clearance: 40 mm ECLASS: 21170308 Special features Digital instrument for radius measurement Suitable for internal and external radius measurement Wireless data transfer and USB interface Rechargeable power source Supplied calibrated to ISO 17025 with certificate Colour touchscreen for guided operation FAQ How is traceability ensured for measurements taken with this instrument? The instrument is delivered fully calibrated to ISO 17025 standards; the accompanying calibration certificate documents traceability for the Microtech Metrology radius measuring device. Can the device transfer measurement data directly to inspection software? Yes, the unit provides Wireless and USB data output for direct transfer of measured values into SPC or inspection software. Is the device suitable for both internal and external radii on cast parts? Yes, the design supports internal and external radius measurement and is indicated for components such as castings and moulded parts. What level of resolution and repeatability can be expected? The device offers a reading resolution of 0.001 mm and a stated variation of 0.70%, combining fine resolution with reproducible results for larger radii. Does the delivery include the calibration documentation required for audits? Delivery includes an ISO 17025 calibration certificate, suitable for inclusion in quality management and audit records. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
5-60mm Radius Measuring Device Colour Touchscreen, Wireless/USB, Rechargeable, ISO 17025 Calibrated - Microtech Metrology
The combination of 0.001 mm resolution, wireless data transfer and an included ISO 17025 calibration certificate ensures reliable traceability and fast integration into quality workflows. Take advantage of precise small‑radius measurement and streamlined data capture — order the radius measuring device directly via Metav Werkzeuge or contact our consultants for technical advice. Radius measuring device »1250511017« by Microtech Metrology — 5–60 mm, 0.001 mm resolution The Radius measuring device is a compact, digital instrument for precise internal and external radius measurement in workshop and laboratory environments. Micro range 5–60 mm for small radii High resolution 0.001 mm for fine detail Wireless + USB data export for traceability Delivered with ISO 17025 calibration certificate Precision where small radii matter Designed for tasks that demand repeatable, fine measurement, this instrument delivers a 0.001 mm reading resolution and an accuracy variation of 0.4–1%, making it suitable for component inspection and tool verification in micro‑assembly and precision engineering. The compact measuring span classifies the device within the micro category (measuring range to 100 mm), which balances reach and stiffness to reduce handling errors. By converting fine analogue behaviour into a stable digital output, the instrument reduces interpretation uncertainty and supports consistent quality decisions. Integrated data flow to speed up inspection Equipped with Wireless and USB data outputs and a 2.4" colour touchscreen, the device simplifies documentation and minimises manual transcription. Measured values can be transferred to inspection software or a production database, shortening the path from measurement to corrective action. The rechargeable battery allows uninterrupted use on the shop floor and reduces consumable waste, while the touchscreen offers clear visual feedback and easy menu navigation for fast batch work. Calibrated traceability for quality assurance Delivered with an ISO 17025 calibration certificate, the instrument supports accredited quality systems and audit requirements. The included calibration document provides traceable measurement uncertainty and simplifies integration into internal control plans. For labs and inspection stations that require documented evidence of conformity, the certificate removes an administrative step and enables immediate use in compliance workflows. Practical application and operator benefits Optimised for internal and external radius measurement, the instrument is a versatile aid in toolmaking, mould production and precision component inspection. The compact format aids access to small contours, while the digital readout and data export reduce operator influence on results. This combination of features fosters process reliability and helps teams deliver parts within tighter geometric tolerances with less rework. Contact Metav Werkzeuge for detailed integration advice or to request the ISO 17025 certificate and technical data package for this Microtech Metrology radius measuring device Technical Data Article number: 1250511017 GTIN: 4061905453175 Manufacturer: Microtech Metrology Facts Measuring range: 5–60 mm Resolution: 0.001 mm Accuracy variation: 0.4–1% Display size: 2.4 inches Special features Data output: Wireless + USB Power: Rechargeable battery Measurement types: Internal and external radius measurement Calibration: ISO 17025 calibration certificate included Digital instrument with colour touchscreen FAQ What measuring range does the device cover? The Radius measuring device covers a measuring range from 5 to 60 mm, placing it in the micro class suitable for small radii. Is a calibration certificate supplied with the instrument? Yes, the instrument is supplied with an ISO 17025 calibration certificate, providing traceable verification of measurement uncertainty. How are measured values exported from the instrument? Measured values can be exported via the device’s Wireless connection or by USB for direct transfer to inspection software or spreadsheets. What resolution and accuracy can be expected? The device offers a resolution of 0.001 mm with an accuracy variation between 0.4% and 1%, appropriate for fine inspections and quality control of small components. Which measurement tasks is the instrument designed for? The instrument is intended for internal and external radius measurement in precision engineering, mould and tool inspection, and other applications requiring reliable small‑radius measurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500-15000mm Radius Measuring Device Colour 2.4" Touchscreen Wireless USB Rechargeable ISO 17025 - Microtech Metrology
Take advantage of calibrated traceability, wireless data transfer and an extended measurement range for reliable radius inspection of very large components. Order the Radius measuring device directly via Metav Werkzeuge or ask their consultants for application advice. Radius measuring device – Microtech Metrology, touchscreen, wireless and USB A Radius measuring device designed for large-scale radius and arc inspection across industrial fabrication and heavy engineering, combining a colour touchscreen with wireless and USB connectivity for streamlined data capture. Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibration included Rechargeable battery for continuous use Measurement range up to 15,000 mm Precise, calibrated measurement for large components This measuring instrument is tailored to projects that require reproducible radius readings on very large parts. With a measurement range to 15,000 mm it falls into the mega/special category, where stiffness and handling are decisive for repeatability. The factory ISO 17025 calibration is supplied with a certificate, which ensures traceable results and simplifies integration into quality management systems. The stated accuracy of 0.4–1%, given as a percentage of the measured value, helps planners assess suitability for toleranced radii on castings, housings or rolled sections. Modern data workflows and operator convenience Data capture is simplified by the colour 2.4" touchscreen and dual wireless + USB outputs, enabling both mobile logging and wired export to inspection software. The rechargeable power supply supports extended on-site use and reduces downtime from battery changes. Together these features enable a rational measurement workflow: faster cycle times, fewer transcription errors and straightforward archiving of measurement records for process control and audits. Built for industry: benefits that affect production The instrument’s 300 mm bridge travel allows local probing and fine positioning over tight zones, while the long-range capability addresses complete arc profiles without stitching multiple setups. For users, this reduces handling and the number of setups required, which directly shortens inspection loops. Robust electronics and a touchscreen interface lower training time for operators and enhance daily throughput—advantages that translate into more predictable production schedules. Contact Metav Werkzeuge today to discuss how Microtech Metrology’s calibrated radius system can be applied to specific large-component inspections; Metav’s specialists in Emmerich will advise on integration, delivery and certified calibration documentation. Technical data Article number: 1250511127 GTIN: 4061905453199 Manufacturer: Microtech Metrology Digital: yes Facts Measurement range: 500 mm – 15,000 mm Stated accuracy: 0.4–1% Display: Colour 2.4" touchscreen Data output: Wireless and USB Bridge travel: 300 mm Power: Rechargeable battery Calibration: ISO 17025 certificate included Special features Suitable for internal and external radius measurement Designed for very large radii and arc inspection Enables digital integration with inspection software Supplied with calibration certificate for traceability Ruggedised for industrial workshop use FAQ What measurement range does this radius gauge cover? The radius measuring device from Microtech Metrology covers a range from 500 mm up to 15,000 mm, suitable for very large components and assemblies (SKU 1250511127). Is a calibration certificate supplied with the instrument? Yes—the instrument is delivered fully calibrated with an ISO 17025 calibration certificate issued by the manufacturer. How are measurement results exported? Measurement data can be exported wirelessly or via USB, allowing quick transfer to inspection software or SPC systems. Can this instrument measure both internal and external radii? The system is configured for both internal and external radius measurement, making it versatile for diverse inspection tasks. What power supply does the device use? The instrument uses a rechargeable battery to support extended on-site operation and reduce interruptions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
6.5-3000 mm Digital Radius Gauge 0.01 mm Readout With Six Measuring Bridges, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a very wide measuring range, fine 0.01 mm resolution and six interchangeable measuring bridges for versatile, reproducible radius checks; order via Metav Werkzeuge or consult our specialists for application advice. Digital Radius Measuring Device RB6 — 6.5–3,000 mm range, 0.01 mm resolution (Metav IndustryLine) The Digital Radius Measuring Device RB6 is a precision instrument for direct measurement of internal and external radii on round components and bores across workshops and inspection benches. Wide measuring range 6.5–3,000 mm Fine 0.01 mm digital resolution Six interchangeable measuring bridges Integrated digital display with TOL and ABS High‑precision range for diverse components The RB6 delivers a measuring range of 6.5–3,000 mm paired with a resolution of 0.01 mm, which makes it suitable for tasks from small bore radii to large ring and housing contours. The instrument’s broad span reduces the need for multiple gauges and streamlines sampling routines on the shop floor. With a measured weight of approximately 0.67 kg, the device is easy to handle yet stable enough for repeatable results when placed on a fixture or held ergonomically during checks. These characteristics contribute to faster throughput and a lower risk of measurement-induced rework. Clear, usable readout and data transfer for efficient inspection An integrated digital display with 0/ON/OFF, ABS, TOL, mm/inch and MODE functions provides immediate, unambiguous results and basic tolerance checks at the instrument. Measurements can be read directly using the included special dial gauge for direct reading, while the instrument’s data output RB7 enables interfacing with external data collection or SPC systems where needed. The combination of on‑device tolerance indication and a transferable data stream supports traceable quality control and reduces manual transcription errors in production records. Practical kit design that supports daily use Delivered with six interchangeable measuring bridges, the instrument covers typical internal and external radius segments without time‑consuming retooling. The set is supplied in a sturdy transport case for safe storage and mobility between measuring stations or workshops; the case protects the bridging elements and gauge during handling and transport. The included optimised bridges and durable readout electronics make the device a practical choice for inspection benches, maintenance teams and toolrooms where a ready‑to‑use instrument is required. Applications and user advantage This radius gauge is optimised for checking the profiles of shafts, bores, flanges and turned parts as well as for spot inspections in incoming goods or final inspection. The blend of a large measurement window and fine 0.01 mm resolution delivers a clear cost‑benefit where fewer instruments are needed to cover a broad component range. The modular bridge concept reduces downtime when changing measurement tasks and supports consistent measurement procedures across operators. Contact Metav Werkzeuge for tailored advice on the RB6 and reliable dispatch from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M301.050.1 GTIN: 4054469178561 Brand: Metav IndustryLine Facts Measuring range: 6.5–3,000 mm Resolution: 0.01 mm Weight: 0.67 kg Measuring bridges: 6 Display functions: 0/ON/OFF, ABS, TOL, mm/inch, MODE Special features Special dial gauge for direct reading Various optimised measuring bridges included Data output: RB 7 Delivered in a transport case Category: dial measuring instruments (radius gauge) FAQ What measuring range does the device cover? The RB6 covers radii from 6.5 mm up to 3,000 mm, enabling inspection of small bores as well as large rings and housings. What resolution and repeatability can be expected? The instrument provides a digital resolution of 0.01 mm, suitable for routine industrial checks where fine, yet robust, discrimination of radius size is required. How many bridges are supplied and why are they useful? Six interchangeable measuring bridges are supplied to match a range of internal and external radius geometries, reducing setup time and improving repeatability across different part types. Can the readout be used for tolerance checks and data capture? Yes. The integrated digital display includes TOL and ABS functions for immediate tolerance assessment, and the RB7 data output allows connection to external data‑collection systems. Is the set ready for transport between workshops? The complete set is supplied in a protective transport case to safeguard the bridges and readout during movement between measuring stations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60-2550 mm Dial Indicator Digital Colour Touchscreen Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high-resolution reading, wireless data transfer and accredited calibration for reliable measurements across large radii; the instrument is ideal for workshop and production use. Order the device via Metav Werkzeuge or consult the Metav team for application-specific advice. Digital indicator by Microtech Metrology — Wireless + 1.5" colour touchscreen, 60–2550 mm range A digital indicator engineered for external and large‑radius measurements, combining a 1.5" colour touchscreen with wireless and USB data output for direct integration into measurement workflows. Wireless and USB data output 1.5" colour touchscreen display Measurement range 60–2550 mm Supplied calibrated to ISO 17025 Reliable precision for large‑format measuring tasks The instrument offers a resolution of 0.001 mm, making it suitable where fine increments matter over extensive spans. The broad measurement range 60–2550 mm enables checks on large radii and extended components without sacrificing detail, while the digital readout reduces reading error compared with analogue dials. Delivered calibrated to ISO 17025, the gauge arrives with a traceable certificate, supporting quality assurance and audit requirements and reducing in‑house calibration effort. Faster data capture and fewer process interruptions Integrated wireless transmission and USB connectivity streamline data collection and documentation, removing manual transcription steps that slow down inspection cycles. The 1.5" colour touchscreen offers a clear, intuitive interface for immediate status checks and quick mode changes, which increases throughput in repetitive measurement tasks. As a result, batch inspection times are shortened and data integrity is improved, supporting leaner quality processes on the shop floor. Built for workshop use and simple handling Constructed as a digital measuring instrument with a user‑focused display and robust electronic output, the gauge balances durable operation with straightforward handling. The compact electronics and clear visual feedback reduce operator variation and help maintain consistent test conditions across shifts. Integration into existing metrology setups is straightforward thanks to standard data interfaces, enabling efficient documentation and compatibility with recording systems. Contact Metav Werkzeuge for tailored advice and to procure the Microtech Metrology digital indicator with ISO 17025 calibration and wireless data output Technical data Article number: 1250530256 GTIN: 4061905042355 Manufacturer: Microtech Metrology Digital display: Colour 1.5" touchscreen Data output: Wireless + USB Digital: yes Facts Measurement range: 60–2550 mm Resolution (reading): 0.001 mm Bridge: 600 Special features Supplied calibrated to ISO 17025 Suitable for external measurements Model type: digital indicator ECLASS: 21170308 ETIM: EC003591 FAQ Is the instrument supplied with a calibration certificate? Yes. The digital indicator from Microtech Metrology is supplied calibrated to ISO 17025 and includes a traceable calibration certificate. What measurement range does the device cover? The instrument covers a measurement range of 60–2550 mm, making it suitable for large radii and extended components. What is the smallest increment readable on the display? The gauge provides a resolution of 0.001 mm for fine incremental readings. How can measurement data be exported? Measurement data can be exported via the instrument’s wireless interface or directly through USB for integration into data collection systems. Is the indicator suitable for external measurements with calipers? Yes. The digital indicator is designed for external measurement tasks and can be used where large external dimensions need to be checked; see SKU 1250530256 for reference. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Radienlehre 0,1-1,0mm -178 MAA 20 Blätter Fuji Tool Radiuslehre
Radienlehre, Radiuslehre, Radienmesser, Radiusmesser Radienlehre für konvexe und konkave Bauteile Die Radienlehre der Firma Fugi Tool ist das perfekte Werkzeug zur Bestimmung von Innen- & Außenradien. Das in Japan produzierte Qualitätswerkzeug wird zur Messung von konvexer und konkaver Messungen von Bauteilen benutzt. Diese Ausführung der Radienlehre besitzt 20 Blättchen aus hochwertigem Stahl, welcher durch eine Klemmschraube zusammengehalten werden. Um konvexe oder konkave Oberflächen zu prüfen, wird die Radienlehre einfach an das zu prüfende Objekt angelegt. Anhand der Maßeinheiten können so einfache Messungen durchgeführt und der Radius bzw. der Durchmesser unkompliziert abgelesen werden. Praktische Radienschablone im Taschenmesser-Format Die Blättchen des Tools, welches ca. die Größe eines Taschenmessers hat, sind je gegenüberliegend angebracht und mittels einer rostfreien Klemmschraube aus Edelstahl befestigt. So können auf der einen Seite die Außenradien und auf der anderen Seite die Innenradien bemessen werden. Mit diesem Tool können Sie in einem Messbereich von 0,1-1 mm arbeiten. Der japanische Edelstahl dieser Radienschablone ist sehr robust und wertig, sodass Sie lange daran Freude haben werden. Mit Anschlag Speziell für Radiusmessungen an Innen- und Außenseite Hochwertiger Qualitätsstahl Gehärtet und entspannt Präzisionsgeschliffen Metrische Ausführung Größere Abmessungen auf Anfrage Ausführung: MAA Anzahl Blätter: 20 Bereich: 0,1-1 mm Sollten Sie Fragen rund um das Thema Radiuslehre haben oder wollen Sie wissen, welche Werkzeuge und Tools noch zur Bestimmung von Durchmessern benutzt werden können, kontaktieren Sie uns einfach. Wir helfen Ihnen sehr gerne weiter!
achieve exact curves with precise radius measurement
Accurate radius measurement is essential where form, fit and function matter. This category covers methods and instruments used to determine and verify radii across construction, metalworking, model making and other technical workshops, ensuring components meet design intent and assembly requirements.
how radius measurement works and where it is indispensable
Radius measurement is carried out using dedicated gauges, templates or measuring instruments that match the geometry of the workpiece. Common approaches include a radius gauge or radius bow for direct reading, templates laid against the profile for quick verification, and digital measuring tools that combine a dial indicator or a caliper with a radius function for numerical results. In fabrication, forming and finishing operations—such as bent metal parts, curved timber profiles or detailed modelling—radius measurement prevents misfit, reduces rework and preserves surface quality.
tangible benefits that improve workshop throughput
Using the right radius-measuring tools delivers measurable production advantages:
- improved fit and assembly precision, reducing the need for corrective machining or trimming
- faster setup and verification, cutting racking and inspection time at the machine or bench
- consistent results across batches thanks to instruments with digital displays, hold function and data outputs for traceable records
- flexibility for complex shapes by using flexible curve rulers alongside hard gauges
- integration of radius checks into existing inspection routines using a precision caliper with a radius feature
why Metav is the pragmatic choice for radius measurement tools
Metav stands for democratisation of precision: the Emmerich-based operation acts as a quality filter for the european market, making reliable measuring technology accessible to workshops and industry alike. With more than 48,000 customers and a stock range exceeding 250,000 products, Metav combines specialist expertise with broad availability. Choose Metav for a consistent supply of radius gauges, digital radius instruments and the supporting accessories that keep production moving and inspection reliable.
summary: precise radius measurement for consistent quality
Whether verifying a single prototype or establishing a repeatable process, robust radius measurement and the appropriate measuring tools ensure parts fit, look and perform as intended. Invest in the right instruments to safeguard product quality and streamline inspection workflows.
faq
What methods are commonly used for radius measurement?
Radius measurement is typically performed with a radius gauge or radius bow, by using a template for visual confirmation, or with digital instruments that combine a dial indicator or a precision caliper equipped with a radius function.
Which instruments provide a readable output and data integration?
Digital radius instruments and some calipers offer digital displays, a hold function and data outputs, enabling immediate readout, temporary value retention and export for quality documentation within radius measurement procedures.
Can flexible curve rulers be relied on for complex profiles?
Flexible curve rulers are suitable for capturing and checking irregular or compound radii; they complement rigid gauges and digital tools during radius measurement where a template needs to match a nonstandard curve.
Is a precision caliper useful for radius checks?
A precision caliper fitted with a radius function provides a compact, versatile solution for measuring small to moderate radii and can be integrated into standard inspection routines for consistent radius measurement.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com