Fast and precise 2D profile measurement for production control
The 2D profile measuring system is designed for fast, two-dimensional measurement of surfaces, providing manufacturers with repeatable high-resolution inspection and process control. Equipped with a 1.5" touchscreen monitor, a microcomputer and a comprehensive software suite—including a free basic version for Windows, Android and iOS—it supports wireless data transfer up to 50 m and offers features such as Go/NoGo checks, min/max recording and statistical analysis to streamline quality assurance. With a measuring range up to 3800 mm in x and 50 mm in z, an accuracy of up to 0.002 mm and a resolution of 0.001 mm, it delivers the precision required for tight-tolerance metalworking and component inspection.
0-900mm 2D Macro-Profile Stativ mit Laser, Touchscreen 2,4", ISO17025 Kalibrierschein, Wireless+USB - Microtech Metrology
Tripod for 2D Macro-Profile Measuring Device with Microcomputer by Microtech Metrology The Tripod for 2D Macro-Profile Measuring Device with Microcomputer is a stable support solution designed for precise non-contact 2D macro-profile measurements in laboratory and production environments. Non-contact Red Laser measurement Wireless+USB data transfer 2.4" Touchscreen display X 0–900 mm / Z 0–8 mm range ISO 17025 calibration certificate included High reproducibility through focused accuracy and non-contact measurement The Tripod supports precise 2D macro-profiling by providing a stable platform for a red-laser, non-contact sensor head. With an X-axis Resolution of 0.01 mm and an X-axis Accuracy of ±0.03 mm, users gain consistent readings for profile and contour checks. The non-contact measurement method reduces part handling and the risk of deformation on delicate Components, which increases throughput in quality checks while preserving component integrity. This stability is especially valuable for repeat inspections and serial testing in production. Seamless data flow and easy integration into measuring workflows Integration is straightforward thanks to Wireless+USB connectivity and included software support. The system ships with Free versions of MDS App and a USB data/charging cable, enabling direct data capture to Windows, Android, macOS and iOS systems. Microtech’s data transfer approach is simpler than the U-WAVE technology of Mitutoyo: only one dongle is required to receive data on a PC, while transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. This reduces setup complexity and accelerates SPC and logging processes. Practical range and robust design for workshop and lab use The device covers a practical measuring envelope of X: 0–900 mm / Z: 0–8 mm, making it suitable for a wide variety of macro-profile tasks from bench-top samples to larger assembly components. Built to be transportable yet sturdy, the tripod assembly and DataMet unit weigh approximately 7 kg, providing a good balance between stability and mobility. A 2.4" Touchscreen aids local operation and quick checks without a PC. The included ISO 17025 calibration protocol ensures traceable results for quality assurance workflows. Target users and recommended application scenarios Metrology technicians, QA engineers and production inspectors benefit most from this support stand: it is ideal for profile measurement of moulded parts, machined surfaces and assembly fixtures where non-contact evaluation avoids surface damage. For users requiring rapid integration into measurement chains, the combination of wireless connectivity, touchscreen operation and ISO 17025 calibration makes the tripod a practical choice for incoming inspection, routine process control and documentation tasks. I recommend Microtech Metrology’s Tripod for 2D Macro-Profile Measuring Device with Microcomputer as a reliable platform to integrate accurate, low-effort 2D profiling into your quality workflow — for expert product advice and application guidance contact METAV Werkzeuge: info@metav-werkzeuge.com; +49 2822 7131930; WhatsApp +49 170 2837271 Technical specifications Tripod for 2D Macro-Profile Measuring Device with Microcomputer Brand: Microtech Metrology SKU: 27720907 Axis: 2D Range: X: 0–900 mm / Z: 0–8 mm Resolution X: 0.01 mm Accuracy: X: ±0.03 mm Weight: 7 kg Data output: Wireless+USB Digital display: Touchscreen 2.4" Delivery set: 2D MACRO-PROFILE DataMet, Free versions of MDS App, USB data/charging cable, Calibration protocol Non-contact measurement: Red laser ISO 17025 calibration: true Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What connectivity options does the Tripod for 2D Macro-Profile Measuring Device with Microcomputer offer? The Tripod for 2D Macro-Profile Measuring Device with Microcomputer from Microtech Metrology supports Wireless+USB transfer and works with the Free versions of MDS App for Windows, Android, macOS and iOS, enabling direct wireless transfers to mobile devices as well as PC logging. What is included with the Tripod for 2D Macro-Profile Measuring Device with Microcomputer on delivery? The delivery for the Tripod for 2D Macro-Profile Measuring Device with Microcomputer by Microtech Metrology contains the 2D MACRO-PROFILE DataMet unit, Free versions of MDS App, a USB data/charging cable and an ISO 17025 calibration protocol. How precise is the Tripod for 2D Macro-Profile Measuring Device with Microcomputer? The Tripod for 2D Macro-Profile Measuring Device with Microcomputer (Microtech Metrology) achieves an X-axis Resolution of 0.01 mm and an X-axis Accuracy of ±0.03 mm, suitable for reliable macro-profile inspections in production and lab environments. Who should I contact if I need help choosing the right setup for the Tripod for 2D Macro-Profile Measuring Device with Microcomputer? If you are unsure whether the Tripod for 2D Macro-Profile Measuring Device with Microcomputer by Microtech Metrology fits your requirements or you need additional technical data, METAV Werkzeuge provides expert advice: info@metav-werkzeuge.com, +49 2822 7131930, WhatsApp +49 170 2837271
1000mm Bottle Profile Stand Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combine fast, traceable measurement, wireless data transfer and an ISO 17025 calibration certificate for dependable bottle-profile inspection; order the stand directly via Metav Werkzeuge or consult our specialists if needed. Stand for bottle profile inspection — Microtech Metrology, Colour 1.5" Touchscreen The Stand by Microtech Metrology is a compact inspection fixture designed for precise control of bottle shapes in production and laboratory quality assurance. ISO 17025 calibrated with certificate included Colour 1.5" touchscreen for fast readout Wireless and USB data output for integration Traceable measurement that satisfies audits and tolerances High-volume quality control depends on measurements that are both quick and defensible. This inspection fixture delivers a documented measurement chain: the device is supplied fully calibrated to ISO 17025, with the calibration certificate included, which supports audit requirements and quality management documentation. With an indicated accuracy of 0.04 mm and a display resolution down to 0.0001 mm, the system provides repeatable readings for routine inspections and acceptance tests. The combination of traceable calibration and fine resolution reduces uncertainty in go/no-go decisions and helps maintain process capability in the filling line. Faster data flow and fewer transcription errors Integration into digital production environments is simplified by the stand’s Wireless and USB data outputs. Measurement values can be transferred directly to inspection software or a production database, reducing manual entry and the associated risk of errors. The 1.5" colour touchscreen gives an immediate visual confirmation of readings and basic settings, speeding up operator interaction during short cycle checks. These digital interfaces support efficient workflows, so metrology tasks become part of the automated quality loop rather than a paper‑based bottleneck — a practical benefit for teams pursuing Industry 4.0 connectivity. Purpose-built geometry for bottle inspection and flexible range Designed specifically for profile control, the inspection mount accepts bottles up to 310 mm in height while offering a broader measurement capability across its overall range of 20–1,000 mm. That span allows the fixture to serve both compact samples and larger containers without frequent changeovers. The stand’s layout and quick‑adjust mechanisms help align samples reproducibly, translating to consistent results across a production shift. Robust construction and digital readout ensure that the system remains stable under repeated handling, making it suitable for quality departments, incoming inspection and R&D labs that require reliable, repeatable checks of bottle contours and dimensions. Contact Metav Werkzeuge today to arrange a specification review or discuss how the Microtech Metrology stand can be integrated into the production line; Metav Werkzeuge provides expert consultation from Emmerich and a quality filter for European supply chains Technical data Article number: 254910000 GTIN: 4061905047961 Manufacturer: Microtech Metrology Facts Measurement range: 20–1,000 mm Maximum suitable bottle height: up to 310 mm Accuracy: 0.04 mm Resolution (display): 0.0001 mm Display: Colour 1.5" touchscreen Special features Wireless and USB data output Delivered calibrated to ISO 17025 with certificate Digital readout for rapid measurements Designed for bottle profile inspection and QA workflows FAQ What measurement range does the stand cover? The inspection stand covers a measurement span of 20–1,000 mm and is able to accommodate bottles up to 310 mm in height. Is the device supplied calibrated for laboratory use? Yes — the stand is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability. How are measurement values exported from the unit? Values can be transmitted via Wireless connectivity or through a USB connection for integration with inspection software or data-logging systems. Can the fixture be used on the production line for rapid checks? The stand’s digital readout and quick alignment features are suitable for inline or at‑line quality checks, providing rapid, repeatable measurements. Which display is used for readout and settings? A 1.5" colour touchscreen provides clear numeric readout and straightforward access to basic settings. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000mm Motorised 2D Height Gauge MetroX 2D Z 0-1000 mm X-Laser ±60 mm, IP54 - Microtech Metrology
Combining a granite base with a motorised Z-axis and an X‑axis laser, this configuration delivers stable, repeatable measurements across a wide working height for production and quality control. Order the MetroX 2D directly via Metav Werkzeuge or ask our consultants for an application‑specific proposal and delivery advice. Motorised 2D height gauge MetroX 2D — granite base, X‑laser ±60 mm (Microtech Metrology) The Motorised 2D height gauge MetroX 2D is a motorised measuring system for precise point, depth and 2D scans in workshop, inspection and laboratory environments. Motorised Z-axis up to 1000 mm range Granite base 630 x 400 mm for stability X‑axis laser ±60 mm for precise lateral alignment 15.6-inch Windows touchscreen with MetroX‑App DataMet computerised readout, IP54-rated display Stable foundations for repeatable shop‑floor measurement A heavy granite base (630 x 400 mm) dampens vibration and provides a rigid reference for repeated inspections, reducing measurement scatter over long runs. The motorised Z-axis removes manual handling variability, ensuring consistent approach speeds and positioning; this is especially valuable when measuring batches or tall components where repeatability directly affects yield. Robust construction makes the system suitable for both production floors and metrology benches where mechanical stability is decisive. Two‑axis precision tailored for common QC tasks The system combines a high‑resolution vertical axis with a lateral laser to enable accurate 2D evaluation: resolution Z: 0.0005 mm and X‑laser: 0.001 mm, with typical accuracies of ±15 µm (Z) and ±60 µm (X‑laser). Measurement modes include point measurement, distance measurement, centre‑line finding, depth measurement and both manual 2D and automatic 2D scanning, so the gauge covers routine feature checks and more complex profile scans. The lateral laser aids quick alignment and repeatable cross‑section positioning without additional jigs. Integrated data workflow and traceability for industry use The gauge is supplied with a 15.6-inch touchscreen Windows PC running the MetroX‑App, which offers scale presets and a Tape mode for guided procedures. Measurement logs can be exported as CSV, PDF or screenshots for immediate inclusion in inspection reports or production records. The onboard DataMet computerised readout is IP54 rated for dust and splash protection, helping to maintain uptime where environmental exposure is a concern and simplifying documentation in regulated workflows. Ergonomics, speed control and typical applications Three selectable speed settings provide control between rapid positioning and fine approach, balancing throughput and measurement safety. The motorised control, combined with the MetroX user interface, reduces operator fatigue and shortens cycle times for repeated checks. Typical users include inspection labs, toolrooms, assembly plants and R&D departments that require reliable height, depth and 2D profile data from a single, shop‑ready instrument. Contact Metav Werkzeuge for tailored specification and delivery of the MetroX 2D—call +49 2822 7131930 or email info@metav-werkzeuge.com for specialist advice from our Emmerich team Technical data Article number: 144310387 Manufacturer: Microtech Metrology Model series: MetroX 2D Data Measurement range Z: 0–1000 mm X‑laser range: ±60 mm Resolution Z: 0.0005 mm; X‑laser: 0.001 mm Accuracy Z: ±15 µm; X‑laser: ±60 µm Special features Motorised Z-axis Granite base 630 x 400 mm 15.6-inch Windows touchscreen with MetroX‑App DataMet computerised readout (IP54) Export: CSV, PDF, screenshots Three speed settings; 2D manual and automatic scan FAQ What measurement tasks can this gauge perform? The MetroX 2D supports point measurement, distance and centre‑line finding, depth measurement and 2D scans (manual and automatic), making it versatile for feature checks and profile inspections. What accuracy and resolution can be expected? Typical performance for the MetroX 2D is resolution Z: 0.0005 mm and X‑laser: 0.001 mm, with stated accuracies of ±15 µm on Z and ±60 µm for the X‑laser alignment. How are measurement results recorded and exported? Results are displayed on the supplied 15.6‑inch Windows touchscreen and may be exported as CSV or PDF files or saved as screenshots for traceability and integration into quality systems. Is the system suitable for production environments? Yes; the granite base and motorised drive provide robustness for shop‑floor use, and the DataMet readout is IP54 rated to resist dust and splashes common in production. What is included with delivery? Delivery includes the 15.6‑inch Windows touchscreen PC with the MetroX‑App, the motorised 2D height gauge on a granite base and the DataMet readout system as specified under article 144310387. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000mm Motorised 2D Height Gauge MetroX 2D Z 0–1000 mm X-Laser ±20 mm, IP54 - Microtech Metrology
Take advantage of the combination of a motorised Z axis with 0–1000 mm travel, an X‑axis laser for precise lateral alignment, and a stable granite base to streamline repeatable 2D inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application support. Motorised 2D Height Gauge MetroX 2D — 0–1000 mm Z with X‑Laser ±20 mm (Microtech Metrology) A Motorised 2D Height Gauge MetroX 2D engineered for precise 2D point, scan and depth measurements in production inspection, toolroom and quality labs. Motorised Z travel 0–1000 mm X‑axis laser ±20 mm measurement range Granite base 630 x 400 mm for stability 15.6‑inch Windows touchscreen with MetroX app Precision and repeatability for reliable inspection The Motorised MetroX 2D pairs a motorised Z axis with a rigid granite base to deliver stable, reproducible measurements across large vertical travel. The Z axis resolution of 0.0005 mm (0.5 µm) and a stated Z accuracy of ±15 µm ensure that vertical position and depth checks detect small deviations that matter for critical assemblies. A motorised drive reduces operator variation and supports repeatable measurement sequences, so productivity gains come from lower rework rates and fewer manual corrections. Rapid workflows and traceable measurement results Integrated DataMet, a computer‑assisted Swiss readout system, together with the MetroX app provides workflow presets and the specialised Tape mode to speed setup and standardise routines. Measurement sessions are exportable as CSV, PDF or screenshots, enabling immediate inclusion in inspection reports and traceability records. This combination reduces inspection cycle time and simplifies statistical evaluations, making quality control both faster and more auditable. Robust operation on the shop floor Designed for everyday industrial use, the readout subsystem offers IP54 protection against dust and splashes, while three selectable speed levels let operators balance speed and precision during scans. The 15.6‑inch touchscreen with a Windows PC and the MetroX app is supplied as standard, giving an intuitive interface for presets, measurement review and data export. The X‑axis laser (±20 mm lateral range) supports quick lateral alignment and centreline checks without time‑consuming mechanical probing. Clear metrology data and practical benefits Lateral measurement via the X‑laser is offered with a resolution of 0.001 mm (1 µm) and a stated X‑laser accuracy of ±20 µm, suitable for alignment and comparative checks on small features and fixtures. The unit supports manual 2D measurement and automatic 2D scanning modes, covering both ad‑hoc spot checks and repeat scanning tasks. These capabilities translate into two concrete advantages: faster setup for batch inspections and consistent measurement records that reduce supplier disputes and internal rejects. For precision 2D inspection tasks, rely on Microtech Metrology’s MetroX 2D and contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 144310386 Manufacturer: Microtech Metrology Product type: 2D height gauge Model series: MetroX 2D Facts Z travel: 0–1000 mm X‑laser range: ±20 mm Z resolution: 0.0005 mm X‑laser resolution: 0.001 mm Z accuracy: ±15 µm X‑laser accuracy: ±20 µm Speeds: 3 speed levels Granite base: 630 x 400 mm Special features Motorised Z axis X‑axis laser measurement DataMet computer‑assisted readout system 15.6‑inch Windows touchscreen with MetroX app MetroX app: scales presets and Tape mode Data export: CSV, PDF, screenshots IP54 protection for DataMet readout Included: 15.6‑inch Windows touchscreen PC with MetroX app FAQ What measurement types does the MetroX 2D support? The MetroX 2D supports point measurement, distance measurement, midline checks, 2D point measurement and both manual 2D scans and automatic 2D scans in X and Z axes. How precise are vertical and lateral readings? Vertical readings (Z) have a resolution of 0.0005 mm and a stated accuracy of ±15 µm; lateral measurements with the X‑laser have 0.001 mm resolution and ±20 µm accuracy. Is the system suitable for routine production inspections? Yes — the motorised drive, preset workflows in the MetroX app and data export options (CSV, PDF) make it well suited for repeated production checks and quality‑control documentation. Which interface and software are provided for data handling? A 15.6‑inch Windows touchscreen PC with the MetroX app is included for on‑device measurement control and export of measurement protocols as CSV, PDF or screenshots. What physical footprint ensures stability during long travels? Stability is provided by the granite base measuring 630 x 400 mm, which reduces vibration and bending across the 0–1000 mm Z travel, improving repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1800mm X-Achse / 40mm Z-Achse Laser Stativ, Touchscreen, kalibriert ISO17025 - Microtech Metrology
Data inconsistency: The product is labelled as "Stativ" (tripod) but the technical specifications (e.g. 2D Macro‑Profile system, Range X 0–1800 mm / Z 0–40 mm, Resolution X 0.01 mm / Z 0.001 mm, Touchscreen 2.4", Wireless+USB data transfer) describe a complete measuring device rather than a tripod. This discrepancy raises significant concerns regarding the accuracy of the product description and its intended use. A tripod typically serves as a stable platform for cameras or other equipment, while the features outlined suggest a sophisticated measuring instrument designed for precision tasks. It is essential for potential customers to have clarity on what they are purchasing to ensure it meets their specific needs and expectations. Misleading information could lead to dissatisfaction and potential returns, impacting customer trust and brand reputation. Therefore, it is crucial to rectify this inconsistency to provide a clear and accurate representation of the product.
1800mm X-Achse, 12mm Z-Achse 2D Makro-Profilstativ, Kalibriert (ISO17025), ohne Laser - Microtech Metrology
Das 2D MACRO-PROFILE DataMet Stativ vereint ISO 17025-Kalibrierung, hohe Auflösung und robuste Konstruktion für reproduzierbare Messungen an großformatigen Bauteilen; nutzen Sie die präzise Auflagefläche und die Wireless/USB-Datenübertragung für effiziente Prozessabläufe und bestellen Sie direkt über Metav Werkzeuge bei Bedarf mit technischer Beratung. 2D MACRO-PROFILE DataMet Stativ — 2D Profilmessgerät Das 2D MACRO-PROFILE DataMet Stativ ist ein fahrbarer Messständer für 2D-Profilmessungen, der längere Messbereiche und sichere Datenübertragung für die Werkstatt und Prüflabor verbindet. Robuste Bauweise für schwere Werkstücke Wireless und USB Datenausgang für direkte Integration Hohe Auflösung: X 0,01 mm / Z 0,001 mm ISO 17025 Kalibrierung mit Kalibrierzeugnis Kompatibel mit MDS APP und USB-Ladekabel Präzision auf langen Messwegen für reproduzierbare Ergebnisse Das Stativ wurde für Anwendungen mit großem Messbereich konzipiert und bietet einen Messbereich von X 0–1800 mm sowie Z 0–12 mm. Dadurch lassen sich mittelgroße bis große Bauteile sicher positionieren, ohne die Auflösung zu opfern. Die Kombination aus feiner Auflösung und stabiler Konstruktion reduziert Prüfzeiten, weil Messungen über längere Strecken zuverlässig reproduzierbar sind. Anwender im Vorrichtungs‑ und Formenbau profitieren besonders von der Balance zwischen Reichweite und Steifigkeit. Datenfluss und Bedienkomfort für moderne Prüfprozesse Für die Datenerfassung steht ein moderner Touchscreen zur Verfügung sowie Wireless‑ und USB‑Schnittstellen, die direkte Übertragung an Windows, Android, iOS, macOS oder Linux erlauben. Die mitgelieferte MDS APP ermöglicht freie Visualisierung und einfache Exportfunktionen. Dieser Datendurchsatz spart Zeit beim Prüfablauf und erleichtert die Integration in bestehende Qualitätsprozesse, weil Messergebnisse unmittelbar weiterverarbeitet werden können. Kalibrierte Messsysteme für vertrauenswürdige Prüfresultate Das Gerät wird inklusive Kalibrierzeugnis nach ISO 17025 ausgeliefert, wodurch die Messunsicherheit dokumentiert und die Nachvollziehbarkeit gegenüber Auditanforderungen gewährleistet ist. Eine formale Kalibrierung ist insbesondere in Industrie‑ und Laborumgebungen relevant, in denen Prüfmittelüberwachung und Rückführbarkeit zu Normen verlangt werden. Die mitgelieferte Dokumentation erleichtert die Einbindung in Qualitätsmanagementsysteme. Lieferumfang, Handling und Aufbauvorteile Das Lieferpaket umfasst das Stativ, kostenlose Versionen der MDS APP, ein USB‑Daten‑/Ladekabel sowie das Kalibrierprotokoll. Mit einem Gewicht von 11,5 kg bleibt das System handhabbar, zugleich sorgt die stabile Basis für reduzierte Vibrationen bei Messungen. Die Ausführung kommt ohne Laser, was die Sicherheit bei der Bedienung erhöht. Diese Ausstattung unterstützt eine schlanke Inbetriebnahme und reduziert vorbereitende Kalibrierarbeiten vor Ort. Empfehlung: Vertrauen Sie auf die Präzision von Microtech Metrology und fordern Sie das Stativ bei Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 an; WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 27721800 Marke: Microtech Metrology Typ: 2D Bezeichnung: Stativ Daten Messbereich: X 0–1800 mm / Z 0–12 mm Auflösung: X 0,01 mm / Z 0,001 mm Genauigkeit: X ±0,02 mm Gewicht: 11,5 kg GTIN: 4061905048173 Besonderheiten Ohne Laser Datenausgang: Wireless + USB Digitalanzeige: Color 1.5" Touchscreen ISO 17025 Kalibrierung: Kalibrierzeugnis beiliegend Lieferung: MDS APP (freie Version), USB DATA/CHARGING CABLE, CALIBRATION PROTOCOL FAQ Welche Messbereiche deckt das Stativ ab? Das Stativ von Microtech Metrology deckt einen Messbereich von X 0–1800 mm und Z 0–12 mm ab, wodurch es für mittelgroße bis große Bauteile eingesetzt werden kann. Wird das Stativ kalibriert geliefert? Ja, das Stativ wird mit einer Kalibrierung nach ISO 17025 ausgeliefert; das Kalibrierzeugnis liegt dem Lieferumfang bei. Wie werden die Messergebnisse übertragen? Das Stativ unterstützt Wireless und USB Datenausgang; mitgelieferte Software und Kabel ermöglichen die direkte Übertragung in gängige Betriebssysteme. Für welche Anwendungen ist das Stativ besonders geeignet? Das Stativ eignet sich besonders für Profilmessungen an größeren Werkstücken in Vorrichtungs‑, Formen‑ und Maschinenbau, wo Reichweite und Reproduzierbarkeit im Vordergrund stehen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
1800mm X-Range mit Laser, USB/Wireless, ISO17025 Kalibrierprotokoll - Microtech Metrology
Stand for 2D Macro-Profile Measuring Device with Microcomputer — Microtech Metrology The Stand for 2D Macro-Profile Measuring Device with Microcomputer is a robust positioning and support solution designed for high-precision, non-contact profile measurement of large parts in production and quality control. Stand for 2D Macro‑Profile measuring devices Non‑contact measurement with red laser 2.4" Touchscreen and MDS App compatibility Wireless+USB data transfer with single dongle convenience ISO 17025 calibration certificate included Exceptional Range and Stable Support for Large Profiles The Stand delivers a clear advantage when large linear coverage is required: an X Range up to 1800 mm paired with a Z Range of 0–8 mm makes it suitable for long workpieces and extended profile scans. The solid construction and 11.5 kg mass provide stability that reduces Vibrations during measurement, which supports reproducible Results. This stability benefits inspection workflows where consistent Part Positioning is critical for repeatable profile data. Precise X‑Axis Readout and Reliable Accuracy Equipped with an X Resolution of 0.01 mm and an X Accuracy of ±0.06 mm, the system is optimized for many workshop and production control tasks that demand traceable, comparable results. The non-contact Red Laser sensing used for Macro‑Profile acquisition minimises part handling and surface influence, so the measured geometry reflects the true Profile rather than contact-induced deformations. Calibration Traceability is provided via the included ISO 17025 certificate. Seamless Data Flow with Simple Dongle Solution Data transfer is designed for fast integration into modern measurement workflows: the unit supports Wireless+USB modes and pairs with the MDS App (free versions provided) for Windows, Android, macOS and iOS. Compared with the U-WAVE technology from Mitutoyo, Microtech’s approach reduces hardware complexity — only a single Dongle is required to receive data on a PC, while direct transfers to iPhone, iPad and Android Smartphones occur straight from the measuring tool. This reduces connector clutter and simplifies mobile logging and SPC tasks. Intuitive Operation and Clear Visual Feedback Operation is facilitated by a high‑resolution 2.4" Touchscreen offering graphical functions like Timer, Preset, Limits and real-time plots. Memory handling supports up to 2000 values with Folder organisation and basic Statistics, enabling on-site checks without a PC. Manual E‑Force (measurement force) control ensures the same Measurement Pressure is applied per cycle, which is especially helpful when different Materials require lower contact pressure to avoid deformation during positioning or probing. Who Benefits Most from This Stand Quality Engineers, Workshop Technicians and Production Inspectors working with long profiles, machined components or assemblies will find the Stand particularly useful. It is tailored for applications where non-contact profile capture, stable Fixturing and direct digital export are priorities — for example, surface profile checking, flange and edge inspection or serial part verification. METAV Werkzeuge offers expert support if further clarification or technical data is required. Strong recommendation: choose the Microtech Metrology Stand for 2D Macro-Profile Measuring Device with Microcomputer for reliable, non-contact profile measurement — for personalised advice contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Stand for 2D Macro-Profile Measuring Device with Microcomputer Brand: Microtech Metrology SKU: 27721807 Axis: 2D Range: X: 0–1800 mm / Z: 0–8 mm Resolution: X: 0.01 mm Accuracy: X: ±0.06 mm Weight: 11.5 kg Data Output: Wireless+USB Digital Display: Touchscreen 2.4" Delivery Set: 2D MACRO-PROFILE DataMet, Free versions of MDS App, USB data/charging cable, Calibration protocol ISO 17025 Calibration: true (Calibration certificate included) Digital: true Special Feature: Non-contact measurement with Red Laser Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What measurement ranges does the Stand for 2D Macro-Profile Measuring Device with Microcomputer from Microtech Metrology cover? The Stand from Microtech Metrology supports an X Range up to 1800 mm and a Z Range of 0–8 mm, making it suitable for long-profile inspections and shallow depth scanning tasks. Can I transfer measurement data from the Stand for 2D Macro-Profile Measuring Device with Microcomputer to a smartphone or PC? Yes, the device provides Wireless+USB data transfer and works with the MDS App (free versions included); Microtech’s single-dongle approach simplifies PC connections and allows direct transfers to iPhone, iPad and Android Smartphones. Is calibration included with the Stand for 2D Macro-Profile Measuring Device with Microcomputer? Calibration is supplied: the delivery includes an ISO 17025 calibration protocol for traceable results and quality assurance. How does the non-contact Red Laser benefit measurement with the Stand for 2D Macro-Profile Measuring Device with Microcomputer? The Red Laser enables profile capture without physical contact, reducing part handling and avoiding measurement errors caused by surface deformation or fixturing pressure.
2800mm Profilstativ für 2D-Makroprofilmessgerät, 0,01mm Auflösung, ISO 17025 Kalibrierschein inklusive - Microtech Metrology
Conflicting product data detected: X-axis accuracy is inconsistent — one source lists X: ±0.004 mm (axite_enrichment) and another lists X: 0.12 mm (genauigkeit_versch). This discrepancy raises concerns regarding the reliability of the information provided. It is crucial to ascertain which measurement is accurate to ensure that the product meets the required specifications and standards. Please verify the correct X-axis accuracy as soon as possible, as this information is vital for maintaining quality control and ensuring that all stakeholders have access to the most accurate and reliable data. Your prompt attention to this matter will help in resolving any potential issues that may arise from the conflicting data. Thank you for your cooperation in this important verification process.
2800mm X-Achse / 40mm Z-Achse 2D Makro-Profil Stativ mit Laser, Touchscreen, Kalibrierschein ISO17025 - Microtech Metrology
Data inconsistency: Z resolution conflicts between "axite_enrichment" (0.001 mm) and "ablesung_versch" (0.01 mm). This discrepancy in Z resolution poses a significant challenge for data integrity and accuracy. The difference in measurement precision between the two parameters can lead to potential errors in data analysis and interpretation. The "axite_enrichment" parameter, with its finer resolution of 0.001 mm, is designed to capture minute variations in data, which is crucial for high-precision applications. Conversely, the "ablesung_versch" parameter, with a coarser resolution of 0.01 mm, may overlook subtle details that could be essential for comprehensive data evaluation. It is imperative to address this inconsistency to ensure that all data sets are aligned and that analyses yield reliable results.
2800mm X‑Achse / 2D Makro‑Profilstativ mit Laser, Touchscreen 2,4", kalibriert nach ISO17025 - Microtech Metrology
Tripod for 2D Macro-Profile Measuring Device by Microtech Metrology A Tripod for 2D Macro-Profile measuring setups, designed to secure and align the DataMet system for precise non-contact red laser scanning in workshop and inspection environments. Stable support for 2D macro-profile systems Non-contact measurement via red laser Compatible with 2.4" touchscreen instruments Wireless+USB data transfer ready ISO17025 Calibration certificate included Precision and reproducibility for production control This mounting solution couples mechanical stability with measurement-grade alignment to support the 2D Macro-Profile workflow. The fixture accommodates the long X travel and fine Z positioning required for serial inspection: Range X: 0–2800 mm and Range Z: 0–8 mm ensure measurement of long parts and shallow profiles alike. With an indicated Accuracy ±0.1 mm, the system is optimised for repeatable checks where guided positioning and vibration damping reduce variability and improve throughput. Seamless data flow and modern interfaces for efficient workflows Connectivity is designed around contemporary inspection processes: the system supports Wireless+USB data transfer and pairs directly with companion software for immediate logging. The included DataMet configuration offers compatibility with Free versions of the MDS App and standard HID/USB modes, enabling transfers to Windows, Android, iOS and macOS systems. Microtech’s approach to data transfer simplifies the setup compared with U-WAVE technology from Mitutoyo — only a single dongle is required for PC reception, and direct transmissions from the instrument to iPhone, iPad and Android devices are supported, removing extra connectors and senders and streamlining data capture. Repeatable measurement force and practical handling for reliable results A configurable measurement-force concept is supported on the measuring systems used with this mount: the E-Force control lets operators set and lock a defined measuring pressure, so readings are taken only when the preset force is reached. Manual adjustment of the measuring pressure is recommended depending on material and geometry; this avoids deformation on soft samples and ensures reproducible contact conditions where applicable. Handling benefits also include a stable base and ergonomic positioning to speed fixture setup and reduce operator fatigue. Robust design and certified traceability for quality assurance Built for workshop and production environments, the support unit integrates a Non-contact Red Laser option and a robust construction at a shipping weight of 20.5 kg for stable operation. The delivery package includes calibration documentation: ISO17025 Calibration is provided, supporting traceability and making the solution suitable for internal QA loops and supplier control. The platform is therefore a practical choice where documented measurement integrity and compatibility with automated data workflows are required. Strong recommendation: choose Microtech Metrology’s tripod solution to maximise the performance of your DataMet 2D Macro-Profile setup; for application advice, calibration questions or to confirm compatibility with specific parts, contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com / Phone: +49 2822 7131930 / WhatsApp: +49 170 2837271 Technical specifications Designation: Tripod for 2D macro-profile measuring device with microcomputer Brand: Microtech Metrology SKU: 27722807 Axis: 2D Range: X: 0–2800 mm / Z: 0–8 mm Resolution: X: 0.01 mm / Z: 0.001 mm Accuracy: ±0.1 mm Weight: 20.5 kg Digital display: Touchscreen 2.4" Data output: Wireless+USB Special feature: With Laser (Non-contact red laser) Delivery set: 2D MACRO-PROFILE DataMet, Free versions of MDS App, USB data/charging cable, Calibration protocol ISO17025 calibration: included Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What is the Tripod for 2D Macro-Profile measuring device by Microtech Metrology used for? The Tripod for 2D Macro-Profile measuring device by Microtech Metrology is designed to provide a stable and precise mounting surface for non-contact red laser scans and long-range X measurements, enabling reliable profile capture across extended workpieces. How does data transfer work with the Tripod for 2D Macro-Profile measuring device by Microtech Metrology? Data transfer with the Tripod for 2D Macro-Profile measuring device by Microtech Metrology uses Wireless+USB modes and is compatible with the MDS App; compared with U-WAVE technology from Mitutoyo, Microtech’s workflow requires only a single dongle for PC reception and supports direct transmission to iPhone, iPad and Android devices from the instrument. Is calibration included for the Tripod for 2D Macro-Profile measuring device by Microtech Metrology? Yes, the Tripod for 2D Macro-Profile measuring device by Microtech Metrology is supplied with an ISO17025 calibration protocol to support traceability and integration into quality assurance processes. Can the measuring pressure be controlled when using the Tripod for 2D Macro-Profile measuring device by Microtech Metrology? When the tripod is used with compatible measuring instruments from Microtech Metrology, the measuring force can be manually adjusted and controlled so that readings are recorded only once the preset force is reached, ensuring consistent results across different materials. Who can help if I need advice about the Tripod for 2D Macro-Profile measuring device by Microtech Metrology? If you are unsure whether the Tripod for 2D Macro-Profile measuring device by Microtech Metrology fits your application or if you need additional technical data, METAV Werkzeuge provides expert consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271
300mm 2D Measuring Machine With Probe, Colour 3.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
The combination of high-resolution sensing and traceable calibration delivers reliable component inspection with minimal rework; the 3.5" colour touchscreen and Wireless + USB output streamline data capture and reporting. Benefit from the consistent contact force control (1–20 N) plus fine adjustment for repeatable results. Order the 2D measuring machine directly via Metav Werkzeuge or ask our consultants if needed. 2D measuring machine – compact 2D profile measuring device with 3.5" colour touchscreen and Wireless + USB (Microtech Metrology) The 2D measuring machine is a compact profile inspection system for workshop and lab use, designed for precise dimensional checks on small to medium components within standard machining and metalworking applications. Colour 3.5" touchscreen interface Wireless + USB data transfer ISO 17025 calibrated with certificate Fine adjustment and 1–20 N measuring force Traceable accuracy for consistent quality control Equipped with ISO 17025 calibration and a measurable uncertainty of ±0.015 mm, this device provides a trustworthy basis for routine quality control and production acceptance. The vertical and horizontal axes offer different display resolutions—Z: 0.001 mm and X: 0.0001 mm—which help detect fine geometric deviations while keeping reported results verifiable. A formal calibration certificate is supplied, simplifying audit trails and supplier quality assurance obligations. Faster inspection workflows and secure data handling A 3.5" colour touchscreen and tablet-ready design reduce setup time and make measurement procedures intuitive for operators. With Wireless + USB data output, measured values and profiles can be exported directly into spreadsheets or quality software, removing manual transcription and improving traceability. The integrated fine adjustment and the tactile probe ensure controlled contact during measurement, lowering the risk of operator-induced variation and speeding up repeat inspections. Ideal for standard workshop measurement ranges Classified in the Standard measurement category, the system covers Z: 0–300 mm and X: 0–25 mm, offering the best compromise between reach and stiffness for everyday machine‑shop tasks. These dimensions suit component inspection in general engineering, fixtures and small assemblies where a balance of reach and rigidity is essential. The controlled measuring force range of 1–20 N allows reliable contact with various workpiece materials while preserving delicate surfaces. Built for reliable use across diverse tasks Digital operation and rugged construction support continuous use in production environments. The fine adjustment mechanism enhances repeatability for batch inspections, while the combination of precise resolution and force control reduces measurement scatter. Integration-ready connectivity makes this system a pragmatic choice for shops aiming to reduce lead times for inspection and to feed measurement data directly into quality records. For tailored specifications, ISO 17025 documentation and rapid delivery from Metav Werkzeuge in Emmerich, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Microtech Metrology 2D measuring machine and its certificate Technical data SKU: 144303371 GTIN: 4061905047954 Manufacturer: Microtech Metrology Facts Measurement range Z: 0–300 mm Measurement range X: 0–25 mm Accuracy: ±0.015 mm Resolution Z: 0.001 mm Resolution X: 0.0001 mm Measuring force: 1–20 N Display: 3.5" colour touchscreen Special features Data output: Wireless + USB Fine adjustment With probe ISO 17025 calibrated with certificate Digital measurement system FAQ What measurement ranges does this system cover? The system measures in Z from 0 to 300 mm and in X from 0 to 25 mm, making it suitable for standard workshop inspections. Is a calibration certificate supplied with the unit? Yes, the Microtech Metrology 2D measuring machine is supplied fully calibrated with an ISO 17025 certificate. How are measurement results exported from the device? Measurement data can be exported via Wireless or USB connections and imported into inspection or spreadsheet software. Can the device handle delicate surfaces without damage? Controlled measuring force (1–20 N) and the fine adjustment feature minimise surface loading, allowing careful contact with sensitive components. Is the touchscreen suitable for use with gloves in a workshop? The colour 3.5" touchscreen is designed for practical workshop use; sensitivity settings and tablet options improve operability under typical working conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm 2D Profile Measuring Machine With Laser Sensor, Colour 3.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
The combination of a laser sensor and a 3.5" colour touchscreen delivers fast, repeatable inspection cycles while the ISO 17025 calibration ensures traceable results; benefit from efficient data export via wireless and USB and order the unit directly through Metav Werkzeuge or request guidance from their consultants. 2D profile measuring machine – Laser sensor, 3.5" colour touchscreen (Microtech Metrology) The 2D profile measuring machine is a compact, workshop-ready profilometer for dimensional inspection with a 0–300 mm vertical range and wireless plus USB data output. Integrated laser sensor for non-contact measurement 3.5" colour touchscreen for intuitive operation Wireless and USB data output for easy export ISO 17025 calibrated with certificate included Reliable measurement for standard workshop tasks For standard workshop metrology the instrument provides a clear balance between reach and rigidity: the Z range 0–300 mm places it in the standard class for machine‑ and metal‑working inspections. The stated accuracy ±0.015 mm and fine resolution (Z 0.001 mm / X 0.002 mm) enable reproducible checks of profiles, heights and step features; this level of precision supports quality control tasks without resorting to larger or more complex systems. The non‑contact laser sensor reduces wear and contact‑induced error, making it suitable for delicate or finished surfaces. Integration and data handling made straightforward Data transfer is handled via wireless and USB output, allowing simple logging to laboratory PCs or integration into existing quality workflows. The colour 3.5" touchscreen presents measurement results and menus directly at the workstation, shortening inspection cycles and reducing operator training time. Numeric outputs conform to common metrology formats, so recorded values can be combined with SPC software or archived for traceability. The device’s compact digital design supports fast setup on benchtops or measurement stands. Traceable accuracy and practical application Delivered with an ISO 17025 calibration certificate, the instrument meets recognised lab standards for traceability and acceptance testing. This formal calibration documents the measurement uncertainty and provides confidence for incoming inspection and final approval tasks. The compact profilometer is therefore appropriate for toolrooms, small‑batch production and component incoming inspection, where reliable, documentable results are required without the footprint of larger coordinate measuring systems. For integration advice or specification matching, contact Metav Werkzeuge — their Emmerich team will provide technical guidance and support for workshop deployment. Technical Data Article number: 144303391 GTIN: 4061905455827 Manufacturer: Microtech Metrology Calibration: ISO 17025 certificate included Category: 2D profile measuring device Core specifications Measurement range Z: 0–300 mm Measurement range X: ±4 mm Accuracy: ±0.015 mm Resolution/readability: Z 0.001 mm / X 0.002 mm Display: Colour 3.5" touchscreen Data output: Wireless, USB Special features & versions Laser sensor integrated Digital operation ISO 17025 calibrated Compact format for standard workshop inspection Classified as Standard (100–300 mm range) FAQ What measurement range does the device cover? The 2D profile measuring machine covers a vertical range of 0–300 mm with a lateral X range of ±4 mm, suited to standard workshop inspection tasks. How precise are the measurements? Measurements are specified at ±0.015 mm accuracy with a readability of Z 0.001 mm / X 0.002 mm, enabling reproducible dimensional checks and profile comparisons. Is the instrument supplied calibrated? Yes, the device is supplied fully calibrated with an ISO 17025 certificate, documenting traceability and measurement uncertainty for formal quality processes. Which data outputs are available for integration? Measurement data can be exported via wireless connection or USB, facilitating logging, SPC workflows and simple transfer to laboratory systems. What surface types does the laser sensor suit? The integrated laser sensor performs non‑contact checks on a wide range of surfaces, reducing the risk of marking or mechanical influence during inspection; it is particularly useful for finished or delicate components. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Motorised 2D Height Gauge MetroX 2D With X‑Axis Laser ±4 mm, 0.0005/0.001 mm Resolution, IP54 - Microtech Metrology
Take advantage of the combination of high-resolution Z measurement, a stable granite base and integrated data exports for traceable inspection results; the motorised MetroX 2D speeds routine checks and reduces rework. Order the system directly via Metav Werkzeuge or contact their consultants for configuration advice. Motorised 2D height gauge MetroX 2D — motorised Z axis with X‑laser and granite base Motorised 2D height gauge MetroX 2D, Z 0–300 mm, X‑Laser ±4 mm provides automated vertical positioning and laser‑based lateral measurement for reliable shop‑floor inspection. Motorised Z axis for repeatable positioning Granite base 400 x 250 mm for stable setups High‑resolution Z readout to 0.0005 mm Integrated MetroX‑App with tape mode Exceptional precision for repeatable part inspection The MetroX 2D combines a solid granite base (400 x 250 mm) with a motorised Z axis to lower measurement variability caused by manual handling. The device delivers a Z resolution of 0.0005 mm and an X‑laser resolution of 0.001 mm, which together support a Z accuracy of ±8 µm and an X‑laser accuracy of ±10 µm. For quality managers this means fewer out‑of‑tolerance findings and faster sign‑off of incoming parts. The granite foundation increases thermal stability and reduces vibration, so measurements remain reproducible across multiple cycles even in a busy workshop. Seamless data flow and traceability for quality control Built around the DataMet computerised Swiss readout system and a supplied 15.6‑inch Windows touchscreen PC with the MetroX‑App, the instrument streamlines documentation. Measurement results can be exported as CSV, PDF or screenshots, enabling direct import into quality management systems and SPC tools. The MetroX‑App’s scale presets and Tape mode reduce setup time for repetitive tasks; automatic data export removes transcription errors and strengthens traceability during audits, simplifying compliance with internal control procedures. Flexible measurement modes that suit production routines The system supports both manual 2D measurement and automatic 2D scanning, plus dedicated point and depth measurements, allowing adaptation to prototyping or production checks. Three speed levels for the motorised Z axis help balance throughput and positional stability when scanning delicate features, while the X‑axis laser provides lateral localisation with ±4 mm range for alignment and midsurface checks. The DataMet readout is rated IP54, offering protection against workshop dust and splashes, and the ergonomically placed touchscreen ensures rapid interaction during inspections. For tailored advice on incorporating the MetroX 2D into existing inspection routines or for assistance configuring presets and export formats, contact Metav Werkzeuge — their specialists can advise on integration and delivery options. Technical data Article number: 144303384 Manufacturer SKU: 144303384 Product type: 2D height gauge Model series: MetroX 2D Manufacturer: Microtech Metrology Numbers / Core technical data Z measuring range: 0–300 mm X‑laser lateral range: ±4 mm Z resolution: 0.0005 mm X‑laser resolution: 0.001 mm Z accuracy: ±8 µm X‑laser accuracy: ±10 µm Display: 15.6‑inch touchscreen Speeds: 3 speed levels Designs / Special features Motorised vertical axis X‑axis with laser Granite base 400 x 250 mm DataMet computer‑assisted Swiss readout system MetroX‑App with scale presets and Tape mode 15.6‑inch Windows touchscreen PC included Data export: CSV, PDF, screenshots IP54 rating for DataMet readout Digital measurement and automatic 2D scan mode FAQ What level of accuracy can be expected from the MetroX 2D? The MetroX 2D achieves Z accuracy of ±8 µm and X‑laser accuracy of ±10 µm (SKU 144303384), making it suitable for precise inspection tasks in component production. Which file formats are available for measurement export? Measurement results from the MetroX 2D can be exported as CSV, PDF or screenshots for easy archiving and analysis. Is a computer supplied with the system, or is external hardware required? A 15.6‑inch Windows touchscreen PC with the MetroX‑App is included with the MetroX 2D, so the unit is ready for integration into existing workflows upon delivery. Can the instrument perform automated scans, or is it limited to single measurements? The MetroX 2D supports both manual 2D measurements and automatic 2D scanning, together with point, depth and centreline measurement modes for comprehensive inspection coverage. How does the granite base contribute to measurement quality? The granite base (400 x 250 mm) provides a stable, thermally robust platform that reduces vibration and drift, improving repeatability during serial measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Motorised 2D Height Gauge MetroX 2D Z 0-300 mm X-Laser ±20 mm, IP54 - Microtech Metrology
Combining a motorised Z axis with 300 mm travel, a 400 x 250 mm granite base and the DataMet computerised readout yields stable, traceable 2D inspection results for production and bench use; order directly via Metav Werkzeuge or consult our specialists for configuration advice. Motorised 2D Height Gauge MetroX 2D — Motorised 2D height gauge with 300 mm Z and X-laser ±20 mm (Microtech Metrology) A Motorised 2D Height Gauge MetroX 2D designed for precise point, depth and 2D scanning measurements in X and Z for workshop and inspection stations. Motorised Z axis with 300 mm travel Granite base 400 x 250 mm for stability DataMet PC readout with Windows app 15.6-inch touchscreen with MetroX app Stable foundations for reproducible measurements The combination of a granite base (400 x 250 mm) and a motorised Z-axis reduces vibration and operator influence, delivering repeatable results in serial inspection. With a Z resolution of 0.0005 mm and a stated accuracy of ±8 µm, the instrument is tailored to metrology tasks where small deviations matter; the robust foundation supports consistent contact and optical readings, making the system suitable for both lab-level checks and routine shop-floor control. Streamlined digital documentation and workflow Integrated DataMet readout and the supplied 15.6-inch touchscreen PC with the MetroX app convert measurements into actionable records quickly. Export options include CSV, PDF and screenshots, enabling direct import into quality systems or archiving of inspection reports. Preset scales and a tape mode reduce setup time for recurring tasks, so traceability and documentation become an efficient part of the measurement routine rather than an afterthought. Flexible measurement modes for diverse tasks The system supports manual 2D measurement and automatic 2D scanning across X and Z, plus point, depth and centreline measurement functions. The X-axis laser provides ±20 mm lateral range with a resolution of 0.001 mm, enabling fine positional checks alongside tactile Z probing. Three speed settings allow adaptation between careful metrology passes and faster scanning sequences, providing a balance of precision and throughput for varied inspection jobs. Built for workshop conditions and system integration With the DataMet readout rated IP54, the readout electronics resist dust and splash exposure typical in industrial environments. The unit runs on Windows, simplifying integration with existing software stacks, while the motorised drive and granite base minimise handling variation. The system’s compact footprint and included PC make it straightforward to introduce into inspection benches or production control stations where robustness and digital connectivity are priorities. Arrange a specification review with Metav Werkzeuge to adapt the MetroX 2D system to specific inspection tasks or request a configuration quote — Metav Werkzeuge can advise on options and deliver from their European stock (info@metav-werkzeuge.com, +49 2822 7131930) Technical Data Article number: 144303386 Manufacturer article number: 144303386 Model series: MetroX 2D Manufacturer: Microtech Metrology Core specifications Measuring range Z: 0–300 mm X-laser range: ±20 mm Resolution Z: 0.0005 mm Resolution X-laser: 0.001 mm Accuracy Z: ±8 µm Accuracy X-laser: ±20 µm Display: 15.6-inch touchscreen Protection: IP54 (DataMet readout) Operating system: Windows Data output: CSV, PDF, screenshots Speed: 3 speed levels Features & Accessories MetroX app with scale presets and tape mode 15.6-inch Windows touchscreen PC included Granite base 400 x 250 mm Motorised Z-axis DataMet computerised Swiss readout system X-axis laser measurement FAQ Can the MetroX 2D perform both manual measurements and automated scans? Yes. The MetroX 2D supports manual 2D measurement and automatic 2D scanning in X and Z, enabling both single-point checks and continuous profile captures. What measurement accuracy and resolution are provided? The height channel offers a resolution of 0.0005 mm with an accuracy of ±8 µm, while the X-laser delivers 0.001 mm resolution and an accuracy of ±20 µm for lateral checks. How are measurement results exported for quality documentation? Results from the MetroX 2D are exportable as CSV and PDF files and can be captured as screenshots via the supplied MetroX app on the included 15.6-inch Windows PC. Is the system suitable for a production environment? The DataMet readout is rated IP54 and the granite base provides mechanical stability, making the MetroX 2D appropriate for shop-floor inspection with sensible environmental protection. What is included with the delivery? Delivery includes the 15.6-inch Windows touchscreen PC preloaded with the MetroX app and the motorised 2D height gauge MetroX 2D (SKU 144303386). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3800mm X-Reichweite Stativ mit Laser, Touchscreen 2,4", ISO17025 Kalibrierschein - Microtech Metrology
Data inconsistency detected: Conflicting Z-axis resolution values in the product data — 0.001 mm (axite_enrichment) vs 0.002 mm (ablesung_versch). This discrepancy in the Z-axis resolution values is concerning and requires immediate attention. It is crucial to ensure that the data is accurate and consistent across all relevant parameters. Please verify the correct value to avoid any potential issues that may arise from using incorrect data. Inconsistent data can lead to significant problems in analysis and interpretation, which may ultimately affect the overall quality of the product. Therefore, a thorough review of the values is essential. Please take the necessary steps to confirm which resolution is accurate and update the records accordingly. Thank you for your prompt attention to this matter.
3800mm X‑Achse, 0‑50mm Z‑Achse 2D Makro‑Profilstativ, ISO 17025 kalibriert, Farb‑Touchscreen - Microtech Metrology
Stativ for 2D Macro-Profile Measuring Device (Tripod) by Microtech Metrology The Stativ for 2D Macro-Profile measuring devices is a robust tripod designed to support precise macro-profile measurement over long X ranges and fine Z resolution, tailored for workshop and production environments by Microtech Metrology. 2D Macro-Profile tripod for X: 0–3800 mm Z-axis precision with 0.001 mm resolution Wireless+USB data transfer to any OS 1.5" colour touchscreen indication system ISO 17025 calibration certificate included Outstanding Precision for Long-Reach Measurements The tripod is optimised for extended X-range inspection up to 3800 mm while offering fine Z-axis detail to 0.001 mm. This combination allows reliable profile capture across large parts without compromising vertical resolution. Built for reproducible results, the system achieves an X-axis accuracy of approximately ±0.006 mm, which supports consistent dimensional control for components where long-range profiling and repeatability matter. Seamless Data Flow — simpler than U-WAVE technology of Mitutoyo Data handling is tailored for modern workflows: the device provides Wireless+USB output for direct transfer to Windows, macOS, Android and iOS. Microtech’s approach to data transfer is simpler than U-WAVE technology of Mitutoyo — only a single dongle is required to receive data on a PC, and direct transmissions to iPhone, iPad and Android devices are performed from the measuring instrument itself. The delivery set includes free versions of the MDS app and a USB data/charging cable to get started quickly. Consistent Measurement Pressure with Manual Force Control The tripod supports manual measurement force control, so the operator sets the desired contact pressure depending on material and application. This ensures that readings are taken only when the configured force is reached, increasing repeatability and reducing variability due to operator technique. For sensitive surfaces, choosing a lower measurement pressure helps prevent deformation while maintaining traceable results. Practical Design for Workshop and Production Use Constructed for stable long-range use, the stand weighs 24.5 kg and is free of laser alignment to avoid interference in shop-floor conditions. The integrated 1.5" colour touchscreen provides clear indication and simple on-device operation, while the included ISO 17025 calibration protocol documents traceable accuracy for quality assurance. The tripod supports tasks from routine inspection to integration into statistical process control workflows. Who benefits from this tripod Manufacturing engineers, quality inspectors and metrology labs that require profiling of large components will find the tripod particularly useful. Its combination of extended X travel, high Z resolution and flexible connectivity makes it suitable for automotive panels, large machined parts and tooling inspection. For integration or special modifications, Microtech Metrology offers tailored range and configuration options on request. Strongly recommended: choose the Microtech Metrology tripod when long-range 2D macro-profile accuracy and simple, modern data transfer are priorities — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Stativ Brand: Microtech Metrology SKU: 27723800 Type: 2D tripod for macro-profile measurement Axis: 2D Range: X: 0–3800 mm / Z: 0–50 mm Resolution: X: 0.01 mm / Z: 0.001 mm Accuracy: X: ±0.006 mm Weight: 24.5 kg Data output: Wireless+USB Digital indication: Colour 1.5" touchscreen Special feature: Without laser Delivery set: 2D MACRO-PROFILE DataMet, Free versions of MDS app, USB data/charging cable, calibration protocol (ISO 17025) ISO 17025 calibration: included Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Is the Stativ compatible with other 2D macro-profile heads from Microtech Metrology? The Stativ for 2D Macro-Profile measuring devices by Microtech Metrology is designed for integration with the DataMet line and compatible heads; for specific head models and custom interfaces contact METAV Werkzeuge to confirm mechanical and electronic compatibility. How does data transfer work with the Microtech Metrology tripod compared to other systems? Microtech Metrology’s tripod uses Wireless+USB transfer that is simpler than U-WAVE technology of Mitutoyo — a single PC dongle handles receptions, and direct wireless output to iPhone, iPad and Android devices is supported from the measuring tool itself; included free versions of the MDS app facilitate data capture. Can the measurement force be adjusted on the Stativ and why is this important? Yes, the tripod supports manual measurement force control; adjusting the measurement pressure ensures consistent contact and reproducible readings, which is particularly important for delicate surfaces or varying materials when using a Microtech Metrology 2D setup. Does the delivery include calibration documentation for quality assurance? The delivery set for the Microtech Metrology tripod includes an ISO 17025 calibration protocol, ensuring traceable results and suitability for controlled production and inspection environments. Who should I contact for technical questions before purchase? If unsure whether the Stativ for 2D Macro-Profile measuring devices by Microtech Metrology meets your requirements, METAV Werkzeuge offers competent advice: email info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271.
3800mm X‑Achse, 2D Makro‑Profilstativ mit Laser, ISO17025 Kalibrierung - Microtech Metrology
Data inconsistency: Z-axis resolution is inconsistent — 0.001 mm (axite_enrichment) versus 0.01 mm (ablesung_versch). This discrepancy in the Z-axis resolution can lead to significant issues in data analysis and interpretation. When measurements are taken with varying levels of precision, it can result in confusion and misalignment of data sets. For instance, if one dataset is recorded with a resolution of 0.001 mm, while another is recorded at 0.01 mm, the finer details captured in the first dataset may not be represented accurately in the second. This inconsistency could affect the overall quality of the data, leading to potential errors in conclusions drawn from the analysis. It is crucial to standardise the Z-axis resolution across all datasets to ensure that comparisons are valid and that the integrity of the data is maintained. Addressing this inconsistency will enhance the reliability of the findings and facilitate more accurate decision-making based on the data collected.
600mm 2D Profile Measuring Machine With Laser Sensor, Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from precise, high‑throughput 2D profiling paired with certified calibration and straightforward data transfer: the combination of a laser sensor, ISO 17025 calibration certificate and wireless plus USB outputs ensures reproducible results and fast integration into inspection workflows. Order the system directly via Metav Werkzeuge or contact our consultants for application advice. Microtech 2D profile measuring machine — laser sensor, colour touchscreen The Microtech 2D profile measuring machine is a compact, digitally driven system for non‑contact profile and dimensional inspection of medium to large components in production and quality control. ISO 17025 calibration certificate included Laser sensor for non‑contact profiling Colour 3.5" touchscreen interface Wireless and USB data outputs Precise, repeatable profiling for larger components Designed for shopfloor and laboratory use, this 2D profile system delivers high repeatability with an indicated accuracy of ±0.02 mm and fine display resolution in the Z and X axes (Z: 0.001 mm, X: 0.002 mm). The vertical measurement range to 600 mm places this instrument in the large‑range class, making it suitable for components and assemblies that exceed typical bench‑scale parts. The laser sensor enables non‑contact measurement of delicate or textured surfaces, reducing risk of damage and eliminating mechanical probing errors, which supports faster throughput and lower rework rates. Streamlined data handling and integration into inspection chains A colour 3.5" touchscreen simplifies setup and visualisation of measurement outcomes, while the combination of wireless and USB outputs allows direct transfer of results into SPC systems or quality databases without complex interfaces. The digital display and wireless capability reduce manual transcription and speed up handover to downstream processes, improving traceability and lowering cycle time for routine checks. Built‑in digital operation helps standardise inspection routines and supports consistent decision making across shifts. Certified calibration and dependable traceability Delivered fully calibrated to ISO 17025 standards, the system includes an official calibration certificate, providing documented traceability for audit and compliance purposes. This level of certification is particularly relevant for regulated production environments and supplier qualification. Supplied by Microtech Metrology and distributed via Metav, the package benefits from Metav’s role as a European quality filter and logistics hub, which supports straightforward procurement and predictable lead times. Contact Metav Werkzeuge for a tailored specification check and delivery from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 144306391 GTIN: 4061905455841 Manufacturer: Microtech Metrology Facts Measurement range Z: 0–600 mm Measurement range X: ±4 mm Resolution Z/X: Z 0.001 mm / X 0.002 mm Accuracy: ±0.02 mm Display: Colour 3.5" touchscreen Special features Laser sensor (non‑contact profiling) Data output: Wireless + USB Digital instrument ISO 17025 calibration certificate included FAQ What measurement range does the system cover? The Microtech 2D profile measuring machine covers a vertical range of 0–600 mm and an X axis range of ±4 mm, making it suitable for larger components that require non‑contact profiling. Is a calibration certificate supplied with the instrument? Yes, the instrument is delivered fully calibrated to ISO 17025 and is supplied with a corresponding calibration certificate for traceable inspection results. How are measurement results exported? Measurement data can be exported via wireless connection or USB; the Microtech system’s digital outputs support straightforward integration into statistical process control and quality documentation workflows. Can the laser sensor measure textured or soft surfaces? The laser sensor provides non‑contact profiling suitable for many textured or sensitive surfaces; specific surface types and finishes should be validated with a sample inspection to confirm optimal settings. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
600mm 2D Profile Measuring Machine With Laser Sensor, Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable, ISO 17025‑calibrated inspection, an integrated laser sensor and wireless data output to accelerate quality control and reduce rework. Order the inspection system directly via Metav Werkzeuge or consult our technical advisors for integration guidance. Microtech Metrology 2D profile measuring machine — Laser sensor & Touchscreen The 2D profile measuring machine by Microtech Metrology is a compact inspection system for fast dimensional and profile checks in production, workshop and quality laboratories. ISO 17025 calibrated delivery Integrated laser sensor for precise profiling Wireless and USB data output Colour 3.5" touchscreen display Reliable, traceable measurement for quality control This inspection system is delivered with a full ISO 17025 calibration and accompanying calibration certificate, providing documented traceability for internal QA and customer audits. The combination of a high‑precision laser sensor and a stated accuracy of ±0.02 mm makes the unit suitable for routine checks where repeatability and certified results are essential. The forensic quality of the readings reduces costly rework by enabling reliable go/no‑go decisions on the shop floor. Measurement range tuned to medium‑size components The device covers a primary vertical range of Z: 0–600 mm with a lateral span of X: ±20 mm, which is well matched to medium‑sized components, assemblies and fixtures. Resolution is optimised for profile work with Z: 0.001 mm / X: 0.010 mm, allowing subtle height and contour details to be captured without lengthy set‑ups. For manufacturers needing consistent, reproducible profile data, this specification balances reach and fidelity for accurate feature control. Streamlined data handling and ergonomic operation Equipped with a Colour 3.5" touchscreen, the system presents menus and measurement results clearly, shortening training time for operators. Measured values and reports are exported via wireless connectivity or USB, simplifying integration into inspection routines and statistical process control. The digital display and direct data output reduce manual transcription, improving throughput and lowering the risk of human error in measurement logging. Proven manufacturer quality and supply reliability Designed by Microtech Metrology and supplied through Metav’s European quality channel, the instrument benefits from a pragmatic support and distribution model. The included calibration certificate and factory testing underline product readiness for industrial use, while Metav Werkzeuge’s local presence ensures reliable availability and shipping from Emmerich. This combination supports a robust measurement workflow with clear lines of responsibility and supply. Speak to Metav Werkzeuge for tailored advice on the ISO 17025‑calibrated Microtech Metrology 2D profile measuring machine and fast delivery from Emmerich. Technical Data Article number: 144306392 GTIN: 4061905455858 Manufacturer: Microtech Metrology Facts Accuracy: 0.02 mm Measurement range Z: 0–600 mm / X: ±20 mm Resolution: Z: 0.001 mm / X: 0.010 mm Display: Colour 3.5" touchscreen Data output: Wireless and USB Special features Laser sensor for profile acquisition Delivered with ISO 17025 calibration certificate Digital evaluation and export capability Designed for production and laboratory inspection FAQ What accuracy can be expected from this 2D profile measuring machine? The Microtech Metrology 2D profile measuring machine specifies an accuracy of 0.02 mm, supported by resolution values of Z: 0.001 mm and X: 0.010 mm, and is delivered with an ISO 17025 calibration certificate. Which measurement ranges are available on the device? The unit measures over Z: 0–600 mm vertically with a lateral travel of X: ±20 mm, making it suitable for medium‑sized parts and profile checks. How is measurement data exported from the system? Measurement results can be exported wirelessly or via USB, enabling direct transfer of inspection data into process control systems or reporting software. Is a calibration certificate included with delivery? Yes, the instrument is supplied fully calibrated to ISO 17025, and a calibration certificate is included with the delivery. Can the system capture fine profile details and height differences? The integrated laser sensor together with the specified resolution (Z: 0.001 mm / X: 0.010 mm) allows capture of fine contour and height information suitable for precision inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
600mm 2D Profile Measuring Machine With Probe, Colour 3.5" Touchscreen, Wireless/USB, ISO 17025 - Microtech Metrology
Take advantage of the combination of high resolution and certified calibration to speed up inspections, while simple data transfer keeps traceability intact; order the device via Metav Werkzeuge or consult their technical team for tailored integration. 2D measuring machine — compact 2D profile measuring device with probe and high-resolution touchscreen by Microtech Metrology A 2D measuring machine designed for precise profile and dimensional inspection of small to medium components, featuring a sensitive probe, a 3.5" colour touchscreen and flexible Wireless + USB data output for laboratory and workshop use High-resolution X and Z measurement 3.5" colour touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Measurable precision that reduces rework and inspection time The profiler offers a carefully balanced metrology package: resolution of Z: 0.001 mm / X: 0.0001 mm combined with an accuracy ±0.02 mm, which permits reliable detection of geometric deviations on small features and profiles. The integrated probe converts surface contours into repeatable digital measurements, so fewer parts are returned to the production line and setup iterations are shortened. This technical performance directly supports quality assurance procedures and makes statistical process control more effective. Seamless data handling for faster reporting and traceability A clearly visible 3.5" colour touchscreen and modern data interfaces streamline daily workflows: results can be exported via Wireless or USB to existing inspection software or spreadsheets without intermediary steps. The unit is supplied with a full calibration certificate issued to ISO 17025, ensuring measurement traceability for audit and compliance purposes. The combination of intuitive operation and certified calibration reduces administrative overhead and provides immediate confidence in measurement reports. Practical range and robustness for lab and shop-floor tasks The device covers a measurement range Z: 0–600 mm and X: 0–25 mm, which is well suited to profile scanning, small assemblies and fixture checks where vertical travel matters. Its compact footprint and industrial-grade components make it suitable for metrology benches in R&D labs as well as inspection stations in production. The system’s digital readout and data export capability support both short-run checks and routine serial inspections, enabling consistent production quality across batches. Contact Metav Werkzeuge for application advice, delivery options and to discuss how this Microtech Metrology 2D profile system can be integrated into existing inspection routines. Technical Data Article number: 144306371 SKU: 144306371 GTIN: 4061905455810 Manufacturer: Microtech Metrology ECLASS: 21170512 Facts Measurement range Z: 0–600 mm Measurement range X: 0–25 mm Resolution Z: 0.001 mm Resolution X: 0.0001 mm Accuracy: 0.02 mm Display: Color 3.5" Touchscreen Data output: Wireless + USB Digital device: yes ISO 17025 calibration: included Special features Probe-equipped measuring head Colour touchscreen operation Wireless data transfer capability USB export for direct data capture Supplied with ISO 17025 calibration certificate FAQ What measurement ranges does the device cover? The Microtech Metrology 2D measuring machine provides a vertical range of 0–600 mm and a horizontal/profile range of 0–25 mm. Which resolutions and accuracy are available? Resolution is Z: 0.001 mm and X: 0.0001 mm with an overall stated accuracy of 0.02 mm for the measuring system. Is the device delivered calibrated for traceability? Yes, the unit is supplied with a calibration certificate issued to ISO 17025, confirming traceable calibration for laboratory and quality assurance use. How are measurement results exported from the system? Results from the 2D profiler can be exported via Wireless or USB, enabling direct capture into inspection software or reporting tools. Which interface and display does the system use for operation? Operation is handled on a 3.5" colour touchscreen, which displays measurement readouts and supports parameter entry for routine inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
600mm Motorised 2D Height Gauge MetroX 2D With X‑Axis Laser ±20mm, IP54 - Microtech Metrology
Take advantage of the combination of a stable granitbasis 400 x 250 mm, motorised vertical travel and laser-guided lateral positioning for repeatable, fast inspection routines; order the MetroX 2D directly via Metav Werkzeuge or ask our consultants if needed. MetroX 2D motorised 2D height gauge — Z 0–600 mm, X‑laser ±20 mm (Microtech Metrology) The MetroX 2D is a motorised 2D height measuring system for precise point and scan measurements in production and quality control, combining a granite base with laser guidance and a Windows touchscreen PC. Motorised 2D height gauge with laser Granite base 400 x 250 mm 15.6-inch Windows touchscreen PC included MetroX-App with scale presets and Tape mode Reliable, repeatable precision for production inspection The motorised vertical axis on the 2D height gauge is coupled with a rigid granitbasis 400 x 250 mm, delivering measurement stability and reduced vibration during runs. With a Z resolution of 0.0005 mm and an X‑laser resolution of 0.001 mm, the system achieves fine detail registration suitable for dimensional checks and depth measures. The stated Z accuracy of ±12 µm and X‑laser accuracy of ±20 µm translate into reproducible results across batches, reducing rework and supporting consistent quality gates on the shop floor. Faster cycle times through laser-guided 2D scanning Automatic 2D‑scan capability on the X and Z axes accelerates routine inspections by traversing predefined paths at three selectable speed stages. The X‑laser ±20 mm enables non-contact lateral reference checks while the MetroX‑App provides scale presets and a Tape mode for common test routines, cutting setup time. Exportable measurement logs in CSV, PDF and screenshot formats ensure quick handover to SPC workflows and traceable documentation for audits. Ergonomic station with industrial readout and connectivity The system is supplied with a 15.6‑inch touchscreen Windows PC running the MetroX‑App, creating an intuitive operator interface for both manual point measurement and automated scan programmes. The integrated DataMet computerised Swiss readout system offers robust data handling with IP54 protection for the readout electronics, making the station suitable for busy production environments where dust or splash resistance matters. Native exports and screenshot capture simplify reporting and integration into existing quality management systems. Built for workshop integration and diverse measurement tasks Designed for versatile use — point measurements, centreline checks, distance and depth measurement — the assembly supports a wide range of inspection tasks from small components to medium assemblies within its Z travel. The motorised drive, combined with the granite bed and laser guidance, reduces operator-induced variation and speeds up repetitive checks, delivering measurable efficiency gains for inspection benches, tooling shops and production lines. The included Windows PC and DataMet readout support easy data export and process documentation. For tailored advice on integrating the MetroX 2D into a production or inspection workflow, or to discuss delivery and calibration options from Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge by email or phone for immediate assistance. Technical Data Article number: 144306386 Manufacturer article number: 144306386 Manufacturer: Microtech Metrology Product type: 2D height gauge Data Z range: 0–600 mm X‑laser range: ±20 mm Resolution Z: 0.0005 mm Resolution X‑laser: 0.001 mm Accuracy Z: ±12 µm Accuracy X‑laser: ±20 µm Speed stages: 3 Touchscreen: 15.6‑inch Readout system: DataMet (computerised Swiss system) Protection: IP54 (DataMet readout) Special features Motorised operation X‑axis with laser guidance Granite base 400 x 250 mm MetroX‑App with scale presets and Tape mode 15.6‑inch Windows touchscreen PC with MetroX‑App included Measurement modes: manual 2D measurement, automatic 2D scan; point, distance, centreline and depth measurements Data export: CSV, PDF, screenshots FAQ What measurement ranges does the system cover? The MetroX 2D motorised 2D height gauge provides a Z travel of 0–600 mm and an X‑laser lateral range of ±20 mm, suitable for medium‑sized components and fixture checks. What level of resolution and accuracy can be expected? Resolution is 0.0005 mm on the Z axis and 0.001 mm on the X‑laser; the system specification lists Z accuracy at ±12 µm and X‑laser accuracy at ±20 µm for consistent inspection results. Which data formats are available for export? Measurement logs and reports from the MetroX 2D can be exported as CSV, PDF and screenshots for direct import into SPC tools or documentation systems. Is the readout suitable for production environments? Yes — the DataMet readout system is IP54 rated (data display electronics), and the supplied 15.6‑inch Windows touchscreen PC is configured for industrial workshop use. Which measurement modes are supported by the station? The MetroX 2D supports manual point and 2D measurement, automatic 2D scanning, centreline measurement, distance checks and depth measurement using either the motorised Z axis or the laser‑guided X axis. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
600mm Motorised 2D Height Gauge MetroX 2D Z-Axis 0.0005mm Resolution, IP54 - Microtech Metrology
Take advantage of the combination of a motorised Z-axis, a granite base and high-resolution readout to speed up quality control while reducing operator variation; order the device directly via Metav Werkzeuge or consult their specialists for application advice. Motorised 2D Height Gauge MetroX 2D — Motorised Z 0–600 mm, X-laser ±4 mm (Microtech Metrology) The Motorised 2D Height Gauge MetroX 2D is a motorised measurement system for precision 2D inspection and depth measurement in workshop and production environments Motorised Z-axis 0–600 mm Granite base 400 x 250 mm 15.6-inch Windows touchscreen High-resolution Z: 0.0005 mm Repeatable, high-resolution measurements for process control The MetroX 2D places emphasis on reproducible results through a motorised Z-axis combined with a granite base 400 x 250 mm, which together reduce vibration and thermal drift during inspection. The system’s Z resolution (0.0005 mm) and stated Z accuracy (±12 µm) allow clear differentiation between acceptable parts and rework candidates, while the X-laser contributes fine lateral position tracking with a resolution of 0.001 mm and an accuracy of ±10 µm. This configuration is aimed at users who require consistent inspection tolerances in serial production and incoming quality checks. Automated scanning and multiple measurement modes to increase throughput Designed for both manual and automated workflows, the instrument supports 2D scan and standard 2D measurement modes (X, Z), along with point, distance, centreline and depth measurements. The motorised drive offers 3 speed stages so scan velocity can be adapted to surface detail or cycle-time requirements. Automatic scanning reduces operator-to-operator variation and shortens inspection cycles, making the system suitable for small-series metrology as well as inline verification tasks. Software-driven reporting and easy integration into workflows Measurement capture is controlled by the DataMet computerised Swiss readout and the supplied 15.6-inch touchscreen PC running Windows and the MetroX-App, which provides scale presets and a Tape mode for specialised tasks. Results can be exported as CSV, PDF or screenshots for traceable reporting and downstream data processing. The DataMet interface is IP54-rated for the readout, protecting electronics in shop-floor atmospheres while maintaining clear visual feedback for operators. Practical benefits for workshop and production use The combination of a stable granite foundation and motorised positioning reduces mechanical uncertainty and simplifies fixture setup. The MetroX 2D is supplied with a ready-to-run touchscreen PC with the MetroX-App, enabling quick commissioning and report generation. For applications that require documented measurement protocols, the system’s digital export formats allow seamless archiving and integration with quality-management software, supporting reproducible inspection routines and faster decision-making on the shop floor. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the MetroX 2D into existing workflows or to request full technical documentation and application examples; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 144306384 Manufacturer: Microtech Metrology Product type: 2D height gauge Model series: MetroX 2D Manufacturer article number: 144306384 Core specifications Z range: 0–600 mm X-laser range: ±4 mm Z resolution: 0.0005 mm X-laser resolution: 0.001 mm Z accuracy: ±12 µm X-laser accuracy: ±10 µm Display: 15.6-inch touchscreen Protection class: IP54 (DataMet readout) Speed: 3 speed stages Features and options Motorised Z-axis Granite base 400 x 250 mm DataMet, computerised Swiss readout system MetroX-App with scale presets and Tape mode Measurement modes: point, distance, centreline, 2D scan, depth measurement Data export: CSV, PDF, screenshots Operating system: Windows Included accessory: 15.6-inch Windows touchscreen PC with MetroX-App X-axis laser FAQ What measurement accuracy can be expected from the MetroX 2D? The MetroX 2D (Microtech Metrology 2D height gauge, SKU 144306384) delivers Z accuracy of ±12 µm and X-laser accuracy of ±10 µm, with a Z resolution of 0.0005 mm for fine-detail requirements. Which measurement modes are available on this system? The MetroX 2D supports point measurement (X, Z), distance measurement (Z), centreline measurement (Z), manual 2D measurement (X, Z), automatic 2D scan (X, Z) and depth measurement, covering common workshop and production inspection needs. Is the system suitable for automated scanning tasks? Yes, the MetroX 2D includes an automatic 2D scan mode with selectable 3 speed stages and a motorised Z-axis, enabling automated profile capture and batch inspection routines. What data output formats does the MetroX 2D support? Measurement reports from the MetroX 2D can be exported as CSV, PDF or screenshots via the supplied Windows touchscreen PC and MetroX-App for documentation and post-processing. How robust is the readout on the shop floor? The MetroX 2D uses the DataMet readout system with IP54 protection for the electronics, which is designed to withstand typical dust and splash conditions found in workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
900mm Stativ für 2D‑Makroprofilmessgerät, X:0–900mm/Z:0–12mm, ISO 17025 Kalibrierschein inklusive, Ohne Laser - Microtech Metrology
Support for 2D Macro-Profile Measuring Device with Microcomputer — Microtech Metrology The Support for a 2D Macro-Profile Measuring Device with Microcomputer provides a stable, ISO-calibrated mounting platform designed for high-precision profile measurement and reliable data transfer in production and laboratory environments. ISO 17025 calibration included Wireless+USB data output for seamless logging Z resolution 0.0001 mm for fine profile detail Range X 0–900 mm and Z 0–12 mm for large parts Colour 1.5" touchscreen for direct operation Precise measurement stability for demanding profile checks The Support delivers consistent positioning and repeatability for macro-profile inspection. Built for demanding metrology tasks, it offers a measurement Range X: 0–900 mm and Z: 0–12 mm, enabling checks on long specimens and shallow profile variations. With an axial Z Accuracy of ±0.002 mm and a high Z Resolution of 0.0001 mm, the mount ensures that subtle profile features are captured reliably. This focus on measurement integrity helps to reduce rework and supports traceable quality processes. Streamlined data workflows and modern connectivity Data handling is optimised: the Support provides Wireless+USB output that pairs directly with the free versions of MDS App and standard PC or mobile applications. Microtech’s data transfer is simpler compared with U-WAVE technology from Mitutoyo — only a single dongle is required for PC reception, while direct transmissions to iPhone, iPad and Android devices originate from the measuring tool itself. This setup reduces cabling complexity and accelerates SPC, logging and reporting tasks while maintaining compatibility with common operating systems. User-focused controls that improve reproducibility Operation is made intuitive by the colour 1.5" touchscreen, foldered memory and function set that support presets, limits and timed captures. Manual E-Force / measurement force control can be applied to adapt the test force to the material and application; measurements are recorded only when the preset force is reached, ensuring reproducible contact conditions and consistent results across operators. The device’s memory and 2000-value capacity let teams collect batch data on-site and transfer it later for analysis. Built for workshop and production integration The Support is designed to integrate into inspection benches and production lines. At roughly 7 kg, it balances portability with stability, and the robust construction suits repeated daily use. The mount complements digital measuring chains and pairs with probes, hubs and other peripherals via standard interfaces. For manufacturers and service providers who require ISO-traceable results, the included ISO 17025 calibration is an immediate quality assurance benefit that simplifies certification workflows. We recommend the Microtech Metrology Support for 2D Macro-Profile Measuring Device with Microcomputer when reliable, calibrated mounting and modern data transfer are critical — for expert advice and configuration support contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Support Brand: Microtech Metrology SKU: 27720900 Type / Axis: 2D Range: X: 0–900 mm / Z: 0–12 mm Resolution: X: 0.01 mm / Z: 0.0001 mm Readout: 0.001 mm Accuracy: Z: ±0.002 mm, X: 0.04 mm Display: Colour 1.5" Touchscreen Data Output: Wireless+USB Digital: true ISO 17025 Calibration: included Weight: 7 kg Delivery Set: Support for 2D Macro-Profile DataMet, free versions of MDS App, USB data/charging cable, calibration protocol Special Feature: Without Laser Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What is the measurement Range of the Support from Microtech Metrology for the 2D Macro-Profile Measuring Device with Microcomputer? The Microtech Metrology Support for 2D Macro-Profile Measuring Device with Microcomputer covers X: 0–900 mm and Z: 0–12 mm, making it suitable for long specimen profiles and fine Z-depth inspection. Does the Support include a calibration certificate and what standard is it to? Yes, the Support from Microtech Metrology for the 2D Macro-Profile Measuring Device with Microcomputer is supplied with an ISO 17025 calibration certificate to support traceable quality assurance. How does data transfer work with the Microtech Metrology Support and is it compatible with mobile devices? Data transfer for the Microtech Metrology Support for 2D Macro-Profile Measuring Device with Microcomputer uses Wireless+USB; Microtech’s approach requires a single dongle for PC reception and supports direct transmission to iPhone, iPad and Android devices — simpler in practice than U-WAVE technology from Mitutoyo. Can measurement force be controlled on the Support during inspection? Yes, when used with compatible measuring tools the Support setup allows manual measurement force control, ensuring that readings are taken only when the preset force is reached for consistent and reproducible results.
900mm X-Achse, 2D Makro-Profilstativ mit Laser, Touchscreen 2,4" und ISO17025 Kalibrierung - Microtech Metrology
Product data conflict: Z-axis resolution is inconsistent — "ablesung_versch" states Z: 0.01 mm, while "axite_enrichment" states Z: 0.001 mm. This discrepancy in the Z-axis resolution is significant and could lead to confusion or misinterpretation of the product specifications. It is essential to clarify which measurement is accurate to ensure that users have the correct information for their applications. The difference between 0.01 mm and 0.001 mm represents a substantial variation in precision, which can impact the performance and functionality of the product. To resolve this issue, a thorough review of the product data should be conducted, and the correct Z-axis resolution should be confirmed and communicated clearly to all stakeholders involved.
Fast, traceable surface measurement for production
The 2D profile measuring device delivers rapid two-dimensional surface measurement with an integrated microcomputer and a 1.5‑inch touchscreen. A comprehensive software suite plus free basic apps for Windows, Android and iOS enable immediate data review and process control on the shop floor. Synonyms used below: 2D profile measurement system, profile measuring system.
How the 2D profile measuring device fits into machining and inspection
Designed for inline inspection and workshop quality control, the profile measuring system captures profiles across long travel while maintaining laboratory-grade precision. The instrument measures up to 3,800 mm in x and up to 50 mm in z, with a resolution of 0.001 mm and an accuracy of up to 0.002 mm. Wireless data transfer of up to 50 m removes cable constraints and speeds integration with existing data workflows.
Clear productivity gains you can quantify
- Reduced setup and documentation time through automated measurement routines and a built-in software suite.
- Faster decision-making via real-time functions such as go/noGo, min/max, data logging and on-board statistics.
- Improved traceability thanks to an included ISO 17025 calibration certificate.
- High repeatability with 0.001 mm resolution and 0.002 mm accuracy, lowering scrap rates and rework.
- Flexible deployment: portable profile measuring system with wireless transfer and cross-platform software.
Why Metav is the practical choice for precision tools
Metav combines decades of industry know-how with a broad, reliable supply chain from Emmerich. With over 48,000 customers and more than 250,000 products, Metav acts as a quality filter for the European market and a single source for metrology and workshop equipment. Choosing Metav streamlines procurement while keeping access to certified measurement solutions and experienced technical guidance.
In short: accurate profiling where it matters
The 2D profile measuring device (also referred to as a 2D profile measurement system or profile measuring system) provides fast, traceable surface measurement with high resolution, wireless data handling and certified calibration — ideal for production-oriented quality assurance.
FAQ
What measuring range and precision can I expect from the 2D profile measuring device?
The 2D profile measuring device offers a measuring range of up to 3,800 mm (x) and up to 50 mm (z), with a resolution of 0.001 mm and accuracy up to 0.002 mm, suitable for precise dimensional inspection and profile analysis.
Which operating systems and software functions are available for the profile measuring system?
The profile measuring system includes a comprehensive software suite and free basic software for Windows, Android and iOS; built-in functions include go/noGo, min/max, data memory, statistics and a formula mode for customised evaluations.
Can measurement data be transferred wirelessly from the 2D profile measurement system?
Yes. The 2D profile measurement system supports wireless data transfer up to 50 m, enabling flexible placement and seamless integration into digital workflows without cable limitations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com