Inspect internal cavities quickly with industrial endoscopes
An industrial endoscope is designed for non‑destructive inspection of hard‑to‑reach cavities, pipes, machine interiors and complex cast parts, enabling visual checks for corrosion, wear, cracks or deposits without dismantling components. It combines a flexible or rigid probe with integrated illumination and optics to relay images to a monitor, and modern digital devices offer high‑resolution chips, adjustable LED lighting and image or video recording for thorough documentation and failure analysis. Using compact probes, articulating camera heads and high‑resolution imaging increases process safety and reduces maintenance costs through early defect detection.
1000mm Camera Probe With Dimmable White LED Illumination, IP67 - Metav IndustryLine
Take advantage of a compact inspection solution that combines a 12 mm slim probe, dimmable white LEDs and IP67 protection for dependable in-line visual checks; order the device directly via Metav Werkzeuge or consult the team for application advice. M503.177.2 camera probe — slim IP67 inspection probe with dimmable white LEDs The M503.177.2 camera probe is a slim inspection camera probe designed for photo‑video endoscopy and confined‑space visual checks, delivering reliable image capture and adjustable illumination for maintenance, quality control and assembly inspections. 12 mm slim probe diameter Dimmable white LED illumination IP67 dust and water protection See clearly across the inspection range The probe offers a depth of field 12.7–305 mm, paired with a 50 mm focal length and a 60° field of view, producing usable imagery across short to medium inspection distances. The built‑in 640×480 resolution sensor provides a clear live image for fault tracing and visual documentation; the optical parameters reduce the need for constant refocusing and speed up routine checks. These characteristics deliver a measurable productivity gain in inspection tasks where repeatable image quality reduces rework and verification time. Illuminate and access narrow spaces with confidence A 12 mm external diameter and 1000 mm length enable access into tight assemblies and ducts while maintaining handling comfort. The probe’s dimmable white LEDs give control over contrast and glare, enabling optimal illumination on reflective or dark surfaces without post‑processing. For field inspection teams, the combination of a slim profile and adjustable lighting translates into fewer measurement interruptions and more consistent defect detection during on‑site or bench inspections. Robust design for repeatable results Rated IP67, the probe withstands dust ingress and temporary immersion, making it suitable for workshop, plant and outdoor environments where contamination and moisture are present. The construction supports routine use in maintenance and production environments, lowering downtime risk through a durable interface and straightforward integration into existing inspection workflows. Where traceability is required, the device’s identifiers and classification support procurement and inventory control in professional toolchains. Contact Metav Werkzeuge today to discuss the M503.177.2 camera probe for resilient inspection setups and to receive tailored advice from our specialists Technical data SKU: M503.177.2 GTIN: 4054469167930 eCl@ss: 21059058 Tariff number: 85229080 Manufacturer: Metav IndustryLine Category: Optik Numbers / Core technical data Probe diameter: 12 mm Length: 1000 mm Resolution: 640×480 Focal length: 50 mm Depth of field: 12.7–305 mm Field of view: 60° IP rating: IP67 Designs / Special features Dimmable white light LED illumination Slim probe body for narrow‑space inspection Suited for photo‑video endoscopy and visual inspection Robust protection against dust and temporary immersion FAQ What is the probe diameter and why does it matter? The probe has a 12 mm diameter; this slim profile allows access into tight assemblies and small bore inspections where larger inspection cameras cannot reach. Is the probe suitable for wet or dusty environments? Yes. The M503.177.2 probe is IP67 rated, providing protection against dust ingress and temporary immersion for reliable field use. What illumination does the probe use? The probe features dimmable white LEDs, enabling adjustable lighting to reduce glare and improve contrast on different surface types. What inspection range can be expected? The optical setup provides a depth of field of 12.7–305 mm, making it effective for close‑range checks up to medium working distances without frequent refocusing. What image quality can be expected from the camera? The integrated sensor delivers 640×480 resolution, suitable for live inspection, documentation and condition assessment in many industrial and maintenance contexts. Which applications is this probe best suited for? Typical uses include machine maintenance, quality control of assemblies, inspection of ducts, pipes and confined spaces, and any photo‑video endoscopy tasks requiring a slim probe. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Camera Probe With Dimmable White‑Light LEDs, 60° View Angle, IP67 - Metav IndustryLine
Take advantage of a slim 12 mm probe head combined with dimmable white‑light LEDs and IP67 protection for reliable visual inspection in confined or wet environments; order the camera probe directly via Metav Werkzeuge or consult our specialists for tailored advice. Camera probe M503.177.1 – 12 mm inspection probe, IP67, 1 m reach (Metav IndustryLine) The camera probe M503.177.1 is a compact inspection camera probe designed for remote visual inspection of narrow bores, assemblies and service access points in industrial and workshop environments 12 mm diameter for narrow access Dimmable white‑light LEDs for precise lighting IP67 protection for dust and immersion 1 m reach for deep inspections Slim profile with dependable illumination for confined inspections The slender 12 mm probe head delivers access where larger optics cannot, enabling visual checks of tight bores, valves and assemblies with minimal disruption to the component. Coupled with dimmable white‑light LEDs, the module provides adjustable illumination to avoid glare and reveal surface detail, while the lightweight 0.2 kg construction reduces arm fatigue during repetitive checks. The IP67 rating guarantees protection against dust ingress and temporary immersion, making the probe suitable for damp or contaminated environments where consistent imaging is required. Imaging characteristics explained for reliable defect detection A broad 60° field of view and a focal length of 50 mm produce a useful balance between context and detail; the specified depth of field 12.7–305 mm allows clear images from close‑range to extended distances without constant refocusing. The sensor resolution of 640×480 is optimised for inspection tasks where real‑time video and clear defect indication are priorities rather than high‑magnification photography. These optical parameters translate into faster diagnosis and fewer repeat inspections, enhancing operational efficiency in maintenance and quality control workflows. Practical benefits and industrial applications Designed for routine maintenance, plant inspections and assembly checks, the probe is particularly useful where confined geometry or moisture are present. The 1 m stainless‑sheathed length offers reach into housings and pipelines while preserving manoeuvrability. Compatibility with standard inspection systems in the optics category ensures straightforward integration into existing toolsets. The robust build and controlled illumination reduce measurement uncertainty during visual evaluation, supporting consistent decision‑making across production and field service teams. For inspections that demand a slim, well‑illuminated and rugged probe, contact Metav Werkzeuge to request the camera probe M503.177.1 and receive expert guidance from our specialists. Technical Data Article number: M503.177.1 GTIN: 4054469167794 Manufacturer: Metav IndustryLine eClass: 21059058 Customs tariff number: 85229080 Facts Diameter: 12 mm Length: 1,000 mm Weight: 0.2 kg Protection class: IP67 Viewing angle: 60° Focal length: 50 mm Depth of field: 12.7–305 mm Resolution: 640×480 Special features Dimmable white‑light LED illumination Suitable for optics inspection applications Robust construction for workshop and field use FAQ What environments is the probe suited for? The camera probe M503.177.1 is rated IP67, making it suitable for dusty environments and temporary immersion; it is therefore appropriate for many workshop and field inspection tasks. How far can the probe see clearly? With a focal length of 50 mm and a depth of field from 12.7–305 mm, the probe provides clear imaging from close range through to longer inspection distances without continual refocusing. Is the illumination adjustable for sensitive surfaces? Yes, the unit features dimmable white‑light LEDs, allowing illumination to be adjusted to avoid glare and reveal surface details during inspection. Can the probe be integrated into existing inspection systems? The probe is designed for use in the optics inspection category and can be integrated with compatible inspection setups; the slim 12 mm head eases fitting into existing fixtures. What is the typical use case for this probe? Typical applications include valve and bore inspections, assembly checks, non‑destructive visual assessment of housings and pipelines, and routine maintenance where access is restricted Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Video Borescope With Detachable 5" Colour Monitor, 2.4 GHz Wireless, 9mm Probe, 128MB Internal + SD Slot - Metav IndustryLine
Take advantage of the combination of detachable 5" LCD monitoring, wireless 2.4 GHz image transmission and a slim 9 mm probe for fast, reliable inspections in confined assemblies; order the inspection unit directly via Metav Werkzeuge or ask the consultants for technical guidance. Photo‑video endoscope M503.173.2 — Inspection borescope with detachable 5" LCD and wireless transmission (Metav IndustryLine) The Photo‑video endoscope M503.173.2 is a compact inspection borescope designed for visual checks in inaccessible areas such as cavities, pipes and assemblies in automotive and construction environments Detachable 5" colour LCD monitor Wireless image transmission (2.4 GHz) up to 10 m Slim 9 mm probe for narrow access Internal memory 128 MB and SD card slot Inspect confined spaces faster with a slim probe and clear visuals The inspection borescope combines a 9 mm probe with a 1,000 mm probe length, enabling access into narrow bores and long cavities while maintaining image stability. The slim probe diameter reduces the need for disassembly, saving production time and avoiding unnecessary part handling. With a rechargeable lithium battery and mains adapter included, the system supports uninterrupted inspections on-site or at the workbench. The design prioritises operational efficiency: quick insertion, stable imaging and straightforward handling support faster decision-making in maintenance and quality checks. Capture and document issues with on-board recording and simple controls Integrated photo and video capture is supported by 128 MB internal memory and an SD card slot for extended storage and transfer. Images are recorded in the device and can be exported via the removable monitor or by using a standard SD card (SD card not included). The detachable 5" colour LCD monitor features digital zoom (1×–4×) and 180° image rotation, allowing detail inspection and correct orientation without reworking the probe position. These recording and viewing functions deliver a verifiable visual record for defect analysis, service reports and traceable maintenance documentation. Reliable wireless connectivity and adaptive lighting for varied conditions Wireless 2.4 GHz image transmission to the detachable monitor offers a practical cable-free setup with a maximum range of 10 m, enabling hands‑free observation while working at awkward angles. Brightness-adjustable LED illumination at the probe tip compensates for low-light environments, and the monitor’s controls allow on-the-fly tuning of exposure and zoom to highlight critical features. This combination reduces inspection time and increases confidence in findings by delivering consistently legible images in variable conditions. Suited to workshop and field environments with clear application focus Engineered for visual checks rather than precision metrology, this inspection system is ideal for quick evaluations in automotive maintenance, plant installations and building inspections where visual access is restricted. The product’s balance of portability, detachable monitoring, and on-board storage makes it a practical choice for service technicians and workshop teams who require dependable imaging without complex setup. The robust feature set supports routine diagnostics and fault localisation, enabling informed decisions that reduce downtime. Contact Metav Werkzeuge for tailored technical advice or ordering information on the Metav IndustryLine photo‑video endoscope M503.173.2 — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M503.173.2 GTIN: 4054469167565 eCl@ss: 21059058 Customs tariff number: 85219000 Facts Probe diameter: 9 mm Probe length: 1,000 mm Monitor size: 5 in Wireless range: 10 m Resolution: 800 × 480 pixels Special features Detachable 5" colour LCD monitor Wireless image transmission 2.4 GHz Digital zoom 1×–4× and 180° image rotation Rechargeable lithium battery and mains adapter Internal memory 128 MB and SD card slot Photo and video recording Adjustable LED illumination FAQ How is the image transmitted from the probe to the monitor? Image data is sent wirelessly via 2.4 GHz transmission to the detachable colour monitor with a maximum practical range of 10 m. Can photos and videos be recorded and exported? Yes. The unit records to 128 MB internal memory and to an SD card via the integrated slot; SD card is not included. What probe dimensions and reach does the system offer? The inspection probe measures 9 mm in diameter with a length of 1,000 mm, suitable for narrow bores and extended cavities. Is the monitor permanently attached or removable for documentation? The 5" colour LCD monitor is detachable, allowing direct viewing, image review and simple transfer of recorded media. For which applications is this inspection unit intended? Designed for quick visual checks in confined or inaccessible areas, it is particularly useful in automotive maintenance, pipe and cavity inspection, and general building inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Camera Probe With Dimmable White LED Lights, 60° Field Of View, 12.7–305mm Depth, IP67 - Metav IndustryLine
Take advantage of a compact inspection solution that combines IP67 protection, dimmable white‑light LEDs and a narrow 12 mm probe for access to confined spaces; the long 3 m cable and broad 12.7–305 mm viewing depth support flexible, repeatable inspections. Order the camera probe directly via Metav Werkzeuge or ask the consultants for application advice. M503.177.4 Camera Probe (12 mm, IP67) by Metav IndustryLine The M503.177.4 is a 12 mm camera probe designed for close‑range visual inspection and photo‑video endoscope applications in industrial maintenance, quality control and confined‑space diagnostics. Compact 12 mm probe diameter for tight access Dimmable white‑light LEDs for adjustable illumination Wide viewing depth 12.7–305 mm for versatile focus IP67 protection for dust‑tight, water‑resistant use Robust design for dependable inspections The inspection probe is engineered to withstand workshop conditions while delivering consistent image quality. The IP67 ingress rating ensures the unit is dust‑tight and protected against temporary immersion, reducing the risk of inspection interruptions on the shop floor. With a slender 12 mm head, the probe accesses narrow bores and cavities that larger cameras cannot reach, shortening inspection time and lowering downtime. The presence of dimmable white‑light LEDs enables tailored illumination for reflective or dark surfaces, improving defect visibility without the need for external light sources. Optical performance that supports fast, accurate decisions Optical parameters are selected to balance resolution and practical usability: a 50 mm focal length and a 60° field of view produce a natural perspective for close‑up work, while the specified viewing depth of 12.7–305 mm covers both micro‑inspections and larger internal features. The nominal resolution of 640 × 480 pixels delivers clear images for visual assessment and documentation. These characteristics reduce the need for repeat measurements and help technicians make reliable pass/fail decisions on the spot, supporting efficient quality control workflows. Practical handling and system compatibility Long runs and awkward access points are handled by the 3 m cable length, which keeps the operator mobile and reduces the need to reposition bulky equipment. The probe is intended for use with photo‑video endoscope systems and can be integrated into existing inspection rigs where a compact, rugged imaging head is required. The straightforward mechanical form and robust protection make the device suitable for recurring maintenance cycles and routine non‑destructive testing, providing a durable inspection tool that complements broader condition‑based maintenance strategies. Contact Metav Werkzeuge for a tailored specification sheet or a technical consultation on how the IP67‑rated M503.177.4 camera probe can be integrated into existing inspection routines Technical data SKU: M503.177.4 GTIN: 4054469167947 Category: Optik ECLASS: 21059058 Core specifications Diameter: 12 mm Viewing depth: 12.7–305 mm Focal length: 50 mm Field of view: 60° Resolution: 640 × 480 pixels Length: 3000 mm Features & protection Dimmable white‑light LEDs IP67 protection Designed for photo‑video endoscope use Includes main and detail images for reference FAQ What inspection environments is this probe suited for? The M503.177.4 camera probe is suited to industrial maintenance, quality control and confined‑space inspections where a compact, dust‑tight and water‑resistant imaging head is required. How does the viewing depth affect inspection tasks? A viewing depth of 12.7–305 mm allows close‑focus checks on small components and the inspection of larger internal features without changing optics, enabling versatile use with one probe. Can the illumination be adjusted for reflective materials? Yes, the dimmable white‑light LEDs permit fine control of illumination to reduce glare and reveal surface details on reflective or dark materials. Is the probe compatible with existing endoscope systems? The probe is intended for photo‑video endoscope applications and can be integrated where a 12 mm imaging head and 3 m cable are acceptable; confirm connector compatibility with the host system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Camera Probe With Dimmerable White LED, 60° Field Of View, 12.7–305mm Depth Range, IP67 - Metav IndustryLine
Robust internal imaging and reliable environmental protection combine to deliver dependable inspection results; the compact 12 mm probe with dimmable white-light LEDs and IP67 protection ensures visual access in confined, contaminated or wet areas. Order the camera probe directly via Metav Werkzeuge or ask our consultants if needed. Camera probe M503.177.3 — 12 mm diameter, IP67, dimmable LEDs (Metav IndustryLine) The camera probe M503.177.3 is a compact inspection head designed for endoscopic visual checks in confined components and assemblies, providing a practical solution for workshop, service and quality‑control environments. 12 mm probe diameter for confined spaces Dimmable white-light LED illumination IP67 dust- and water-resistant 12.7–305 mm focal range for close and depth Precision imaging for demanding inspections The probe delivers a balance of compact design and measurable performance: the 12 mm outer diameter permits entry into narrow bores and tight cavities where larger heads cannot follow, while the 60° viewing angle captures a broad field without repositioning. The sensor delivers 640×480 resolution suitable for visual fault detection and documentation; this resolution is optimised for pragmatic inspection tasks rather than metrological measurement, making the unit a cost-effective option for visual quality checks and service diagnostics. The solid construction and IP67 rating protect electronics during exposure to dust and splashes, increasing uptime and reducing inspection-related downtime. Controlled illumination and adjustable focus for clear results Integrated dimmable white-light LEDs provide uniform lighting across varying working distances, enabling contrast control to reveal surface defects or geometry changes. The optical design supports a 12.7–305 mm focal range with a nominal 50 mm focal length, which enables both close-up detail and deeper field observation without frequent refocusing. For operators, this means fewer adjustments during inspection runs and higher throughput when scanning cavities, housings or assemblies; for process owners, it means consistent image quality that supports faster decision making. Built for workshop use and straightforward integration A robust 3 m cable and a compact camera head keep handling simple in service and production settings; total weight around 0.6 kg makes the unit manageable for hand‑held or fixture-mounted applications. The probe is supplied in the Optik category and is compatible with related inspection accessories listed as suitable for M503.171.0 and M503.172.0, enabling modular deployment across inspection stations. The IP67 protection, combined with practical ergonomics and the option to regulate illumination, reduces the risk of repeat inspections and supports reliable documentation for quality records. Check availability of the Metav IndustryLine camera probe M503.177.3 at Metav Werkzeuge in Emmerich and request application-specific advice from our consultants to confirm fit for purpose Technical data Article number: M503.177.3 GTIN: 4054469167800 eClass: 21059058 Tariff number: 85229080 Facts Resolution: 640×480 Probe diameter: 12 mm Viewing depth: 12.7–305 mm Focal length: 50 mm Viewing angle: 60° Cable length: 3,000 mm Weight: 0.6 kg Protection class: IP67 Special features Dimmable white-light LEDs Category: Optik Suitable for: M503.171.0 / M503.172.0 Manufacturer: Metav IndustryLine FAQ What environments is this probe suited for? The camera probe M503.177.3 is designed for workshop and service environments where IP67 protection and a compact 12 mm diameter are required for inspections in dusty or damp conditions. Can the illumination be adjusted for reflective surfaces? Yes. The dimmable white-light LEDs integrated into the M503.177.3 allow controlled illumination to reduce glare on reflective parts and improve contrast for visual defect detection. Is the probe compatible with other inspection systems? The probe is listed as suitable for accessory sets M503.171.0 and M503.172.0 and can be integrated where compatible endoscope interfaces are present; compatibility depends on the host device interface and mounting specification. What is the inspected range and how does it affect use? With a focal range of 12.7–305 mm, the probe covers close‑up detail and moderate depths in cavities, making it versatile for component bores, housings and assemblies where both near and mid‑range views are needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Inspection Endoscope With 5" Removable Wireless Colour Monitor, 128MB Internal Storage, SD Slot, 2.4GHz Wireless - Metav IndustryLine
Take advantage of the combination of a narrow 12 mm probe, a 1,000 mm inspection reach and wireless monitoring for fast, reliable checks in confined spaces; order directly via Metav Werkzeuge or consult the technical team for application advice. Photo‑video endoscope M503.173.1 by Metav IndustryLine — 12 mm probe, removable 5” wireless monitor The Photo‑video endoscope M503.173.1 provides wireless imaging for inspections in confined spaces such as pipes, cavities and engine bores, making visual checks in automotive and construction applications straightforward and fast 12 mm probe for narrow access Removable 5” wireless colour monitor 128 MB internal memory plus SD slot Wireless transmission up to 10 m Inspect narrow spaces with consistent clarity The compact 12 mm probe is designed to reach into tight passages where larger cameras cannot go. With a 1,000 mm probe length, the system suits inspections of cavities, pipe runs and engine internals while maintaining manoeuvrability. The narrow profile reduces the need for disassembly, saving labour time and minimising downtime in workshop or site environments. The slim probe construction also improves access for maintenance tasks that require a precise visual assessment rather than invasive intervention. Capture and review evidence quickly on the move A detachable 5” LCD colour monitor offers immediate live viewing and basic controls, while the wireless 2.4 GHz transmission supports a working range of up to 10 m, enabling flexible positioning of the display. Integrated 128 MB internal memory and an SD card slot allow photos and videos to be stored on the device for later documentation and reporting. The camera provides digital zoom (1×–4×) and 180° image rotation, making it simple to orient and enlarge the area of interest without interrupting the inspection flow. Lighting, power and usability engineered for workshops Adjustable LED illumination is controlled from the monitor to adapt contrast and glare for different surfaces and depths, improving defect detection on metallic and non‑metallic components. Power is provided by a rechargeable lithium battery with included mains adapter, offering portability for field use and convenient recharging between shifts. The monitor’s control keys allow rapid adjustments to brightness and zoom, reducing the learning curve for technicians and enabling repeatable inspection results. Built for routine diagnostics and maintenance The system is configured for practical workshop use: wireless viewing, on‑board storage and a robust probe suited to automotive, plant maintenance and building inspections. Documentation and traceability are supported through saved images and video, assisting fault analysis and communication with colleagues or clients. The unit’s specification prioritises efficiency and repeatability, so inspection tasks can be completed with fewer interruptions and clearer outcomes. For tailored advice on integrating the Metav IndustryLine photo‑video endoscope M503.173.1 into existing inspection routines, contact Metav Werkzeuge for technical consultation and order support Technical data Article number: M503.173.1 GTIN: 4054469167589 Tariff number: 85219000 Category: Optics Facts Probe diameter: 12 mm Probe length: 1,000 mm Monitor size: 5 inches (removable) Wireless range: up to 10 m (2.4 GHz) Internal memory: 128 MB Digital zoom: 1×–4× Special features Rechargeable lithium battery and mains adapter Removable wireless colour monitor with image rotation SD card slot (SD not included) LED illumination with adjustable intensity Wireless image transmission via 2.4 GHz to monitor Suitable for inspections in pipes, cavities and engine bores Photo and video capture for documentation FAQ What probe diameter and length does the endoscope use? The Metav IndustryLine photo‑video endoscope M503.173.1 features a 12 mm probe diameter with a 1,000 mm probe length suitable for narrow and deep inspections. Can images and video be stored and transferred? Yes, the unit has 128 MB internal memory and an SD card slot for additional storage; wireless transmission to the removable 5” monitor is provided via 2.4 GHz (max. range 10 m). Is the monitor permanently attached or removable? The colour 5” LCD monitor is removable, allowing flexible positioning of the display and hands‑free viewing if required. How is lighting adjusted for different inspection conditions? LED illumination is adjustable from the monitor, permitting control of brightness to suit dark cavities or reflective surfaces during inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Inspection Endoscope With Removable 5" Wireless LCD Monitor, Internal 128MB Storage, SD Slot, 2.4GHz Wireless - Metav IndustryLine
Take advantage of a compact inspection solution that combines wireless image transmission, a detachable 5" LCD colour monitor and a 12 mm, 3 m probe for fast visual checks in confined spaces; order the device directly via Metav Werkzeuge or contact the consultants for tailored advice. M503.173.4 Photo‑video endoscope — detachable 5" LCD and wireless 2.4 GHz transmission M503.173.4 is a portable photo‑video endoscope designed for inspections in narrow bores, pipework and cavities across automotive and construction applications Detachable 5" LCD colour monitor Wireless 2.4 GHz image transmission 10 m 12 mm probe diameter, 3 m probe length Rechargeable lithium battery and SD slot Inspect tight spaces faster with wireless monitoring The detachable 5" LCD provides immediate visual feedback while the wireless 2.4 GHz link transmits images up to 10 m, reducing the need for awkward cable routing. This configuration supports on‑the‑spot decisions: the internal 128 MB memory and SD card slot allow capture and secure transfer of images and video for later documentation. The combination of removable display and local storage speeds up repetitive inspection routines and simplifies traceability during maintenance checks. Probe geometry and optics tailored for confined inspections A slender 12 mm probe with a 3 m length reaches into engine bays, ducts and structural cavities while maintaining manoeuvrability. The camera delivers an 800×480 resolution image that is enhanced by adjustable LED illumination, making defects and obstructions easier to spot. The unit offers digital zoom (1×–4×) and 180° image rotation, which help to align views without repositioning the probe — a practical advantage when access is limited and accuracy of observation is critical. Power, handling and documentation for professional workflows Power is supplied by a rechargeable lithium battery with an included mains adaptor, enabling extended field use and uninterrupted inspections. The removable monitor supports convenient sharing of live images between colleagues on site, while recorded files stored via the SD card slot integrate with existing maintenance records. Built and distributed under the Metav IndustryLine quality approach, the device is configured for repeatable visual inspection tasks, improving efficiency and reducing time spent on exploratory disassembly. For purchase details, delivery options or technical clarification about the M503.173.4 photo‑video endoscope, contact Metav Werkzeuge in Emmerich for expert advice and reliable supply from the Metav quality centre Technical data SKU: M503.173.4 GTIN: 4054469167596 Customs tariff number: 85219000 Facts Probe diameter: 12 mm Probe length: 3,000 mm Monitor size: 5" LCD Display resolution: 800×480 Wireless range: 10 m Special features Rechargeable lithium battery and mains adaptor Internal 128 MB memory SD card slot for photo and video transfer Wireless image transmission via 2.4 GHz Digital zoom (1×–4×) and 180° image rotation Adjustable LED illumination Suitable for visual inspection of cavities and pipes FAQ What environments is this inspection camera suited for? The M503.173.4 photo‑video endoscope is suitable for quick visual checks in confined areas such as engine bays, ducts, pipes and hollow components commonly encountered in automotive repair and construction. Can images and video be saved and transferred? Yes. The device stores footage on the internal 128 MB memory and supports an SD card slot for easy transfer of photos and video to a PC or archive. How is the image displayed and rotated? Live images are shown on the detachable 5" LCD colour monitor; the unit provides digital zoom (1×–4×) and 180° image rotation to align views without moving the probe. What is the effective wireless range for remote monitoring? Wireless image transmission uses 2.4 GHz and supports a maximum working range of approximately 10 m to the detachable monitor. Is the probe suitable for inspecting tight bores and pipes? Yes. With a 12 mm diameter and 3 m length, the probe is designed to access narrow bores, pipes and cavities while remaining flexible and easy to guide. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.9mmx2m Inspection Camera With 4.3" Colour Monitor, Dimmable LED, SD Slot, IP68 - Metav IndustryLine
Take advantage of the compact probe size, crisp display and extended battery life to carry out fast, reliable inspections in workshop and site environments. Order the inspection device directly from Metav Werkzeuge or consult our technical advisers if additional data is required. Metav IndustryLine Foto‑Video Endoscope — 4.3" colour monitor, 3.9 mm probe The Metav IndustryLine Foto‑Video Endoscope is a handheld inspection camera designed for visual checks in confined areas such as hollow spaces and pipes in automotive and construction applications. 4.3-inch colour LCD, 70° viewing angle 3.9 mm probe with 2 m flexible cable Dimmable white LED illumination SD card slot for photo and video storage IP68-rated cable and 5-hour runtime Fast, reliable inspection where access is limited The inspection camera combines a 3.9 mm probe with a 2 m cable, giving access to narrow bores and deep cavities while maintaining manoeuvrability. This slender probe diameter and flexible lead make the device particularly suitable for quick visual checks of hollow spaces and pipes in automotive and construction contexts, where time and repeatability matter. The tool’s IP68 cable protection ensures resilience against dust and temporary immersion, supporting on-site work in exposed environments without compromising the imaging unit. Clear images and uninterrupted operation for diagnostic tasks Workflows benefit from a 4.3-inch colour LCD (480 x 854 px) paired with a 1920 x 1080 camera sensor in the probe, delivering detailed live images on a compact display. The probe’s dimmable white LEDs allow contrast adjustment in darker cavities, while the SD card slot enables straightforward capture and transfer of photos and videos (SD card not included). Power is provided by a 2600 mAh rechargeable battery, offering approximately 5 hours of runtime for extended inspections and reducing the need for frequent recharging during site shifts. Ready-to-use set that speeds up routine checks The inspection kit arrives with practical attachments — head cap, magnet cap and hook — to increase the range of observable tasks and simplify retrieval or targeted views in awkward positions. At around 0.6 kg, the handheld unit is portable for bench work and site use alike. The combination of a colour monitor, local storage and robust probe assembly makes this inspection camera a pragmatic choice where fast visual verification is required rather than full metrological measurement. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine inspection camera into existing inspection routines or to request a tailored quotation from our Emmerich team Technical data Article number: M503.192 GTIN: 4061905450075 Brand: Metav IndustryLine Facts Probe diameter: 3.9 mm Cable length: 2 m Battery capacity: 2600 mAh Runtime: approx. 5 hours Display: 4.3 inch (480 x 854 px) Camera resolution: 1920 x 1080 px Viewing angle: up to 70° Weight: 0.6 kg IP rating: IP68 (cable) Special features SD card slot for photo/video storage (SD card not included) Dimmable white LEDs on camera probe Accessories included: head cap, magnet cap, hook Suitable for quick visual inspection of hollow spaces and pipes in automotive and construction Colour monitor for immediate image review FAQ What is the probe diameter and cable length of the inspection camera? The probe has a diameter of 3.9 mm and is mounted on a 2 m flexible cable for extended reach. How long does the battery last on a single charge? The internal 2600 mAh battery provides approximately 5 hours of continuous operation under typical conditions. Can images and video be saved directly from the device? Yes. The unit includes an SD card slot for storing photos and videos; an SD card is not included. Is the inspection probe suitable for use in wet or dusty environments? The cable and probe assembly are rated IP68, offering protection against dust ingress and temporary immersion. Which accessories are supplied with the inspection camera? The scope is delivered with a head cap, a magnet cap and a hook to support different inspection scenarios. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5" Wireless Photo‑Video Endoscope With Removable LCD Monitor, 128MB Internal Memory, SD Card Slot - Metav IndustryLine
Take advantage of wireless image transmission, a detachable 5" colour display and integrated storage for efficient visual inspections in confined spaces; order the device directly via Metav Werkzeuge or contact the consultants for tailored advice. Photo‑video endoscope M503.173.0 – detachable 5" LCD, wireless 2.4 GHz (Metav IndustryLine) The photo‑video endoscope M503.173.0 delivers portable, wireless inspection capability for confined and hard‑to‑reach areas, ideal for workshop and site checks. Detachable 5" LCD monitor Wireless 2.4 GHz image transmission 128 MB internal memory and SD slot Rechargeable lithium battery and mains supply Fast, reliable inspections with wireless imaging The inspection camera uses wireless 2.4 GHz transmission to send live images to the 5" detachable LCD, enabling clear observation of components without direct access. With a maximum wireless range of 10 m, the system is suitable for rapid checks where a tethered solution would be cumbersome. The combination of immediate live feed and portable power provides a practical improvement in workflow efficiency and reduces the need to disassemble assemblies purely for visual checks. Clear on‑screen controls and image handling for documentation A detachable 5" colour monitor offers digital zoom (1×–4×) and image rotation (180°), while the LED illumination can be adjusted via dedicated control keys. Images and short videos are stored on 128 MB internal memory and may be expanded via an SD card slot (SD card not included). This simplified handling means inspection results can be documented and reviewed without specialist software, supporting faster decision-making in maintenance and diagnostics. Built for workshop and site conditions Power is supplied by a rechargeable lithium battery with the option to use the mains adapter for extended sessions. The camera assembly is designed for visual inspection of hollow spaces and pipes, making it well suited to automotive and construction applications where access is limited. The product is supplied in a transport case to protect the device during transit, ensuring that the equipment arrives ready for immediate use on site. Practical benefits and purchase rationale For routine visual inspection tasks the system replaces repeated disassembly by offering instant visual access and on‑board storage, saving labour time and reducing downtime. The detachable monitor adds flexibility: the imaging head can be fed into confined areas while the display remains with the operator, enabling safer and more controlled inspections. These practical advantages make the solution a sound choice for workshops that require reliable, documented inspections. For specialist guidance on integrating the Metav IndustryLine inspection camera into workshop routines, contact Metav Werkzeuge for procurement advice and technical consultation. Technical Data Article number: M503.173.0 GTIN: 4054469167534 Eclass: 21059058 Manufacturer: Metav IndustryLine Facts Resolution: 800×480 Monitor size: 5" Wireless range: 10 m Internal memory: 128 MB Zoom: 1×–4× Image rotation: 180° Special features Wireless 2.4 GHz transmission to colour monitor SD card slot (SD card not included) Rechargeable lithium battery and mains adapter Adjustable LED illumination Supplied in transport case Suitable for inspection of hollow spaces and pipes FAQ Is the monitor fixed or removable? The monitor is detachable; the 5" detachable LCD can be used separately from the camera head, as specified for the M503.173.0 inspection camera. How far does the wireless transmission reach? Wireless image transmission operates on 2.4 GHz with a maximum effective range of 10 m to the colour monitor. Can images and videos be saved externally? Recordings are saved to 128 MB internal memory and can be transferred or expanded using the SD card slot; note that an SD card is not supplied with the unit. Is this suitable for automotive pipe and cavity inspections? Yes, the camera is ideal for quick visual checks in hollow spaces and pipes commonly encountered in automotive and construction work. Is the system supplied ready for transport? The device is supplied in a transport case to protect the equipment during transit and storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.5mm 2m Dual Camera Inspection Probe 4.3" Colour Monitor, Dimmable LEDs, SD Slot, IP68 - Metav IndustryLine
Take advantage of the combination of a compact 5.5 mm probe, a dual‑camera setup and robust IP68 protection for fast, reliable inspections in tight or wet environments; order the device directly via Metav Werkzeuge or contact our consultants for technical advice. Photo‑video endoscope with 4.3‑inch colour monitor, 5.5 mm × 2 m probe (Metav IndustryLine) The photo‑video endoscope with 4.3‑inch colour monitor and 5.5 mm × 2 m probe is designed for visual inspection of confined spaces such as pipes, engine bores and cavities in automotive and construction work. 4.3‑inch colour LCD, 70° viewing angle 5.5 mm probe with 2 m flexible cable IP68‑rated cable for wet environments SD card slot for photo and video capture Fast, reliable inspection for confined spaces The portable inspection system delivers focused visual access where conventional tools cannot reach. The dual camera configuration provides complementary viewing angles, reducing the need for repeated repositioning and accelerating fault finding. The slender 5.5 mm probe and the flexible 2 m cable allow entry into narrow bores and ducts, while the rugged design keeps operations stable under workshop conditions. This efficiency translates into shorter downtime and clearer diagnostics in day‑to‑day maintenance workflows. Clear images and straightforward documentation Sharp on‑screen imaging and direct recording make condition reporting and quality documentation immediately practical. The probe camera records at 1920×1080 pixels, while the monitor displays at 480×854 pixels for instant visual feedback; captured images and videos are stored via the SD card slot (SD card not included). Integrated dimmable white LED illumination allows exposure control for reflective or dark surfaces, meaning critical details can be revealed and saved without post‑processing. This capability supports traceability and faster decision making in inspection protocols. Built for workshop use: robust, portable and long‑running Durability and uptime are engineered into the unit: the cable is IP68 rated for reliable use in damp or dirty environments, and the accessories (head cap, magnet cap and hook) expand inspection options for varying tasks. The internal battery ( 2600 mAh ) provides approx. 5 h of operation on a full charge, enabling extended onsite checks without frequent recharging; the whole kit remains lightweight at about 0.6 kg, making it easy to carry between jobs. Metav IndustryLine quality control ensures consistent performance and a dependable supply chain for professional workshops and service fleets. Contact Metav Werkzeuge for personalised advice on the Metav IndustryLine photo‑video endoscope or to discuss application requirements for automotive, construction or plant maintenance inspections. Technical data Article number: M503.193 GTIN: 4061905450082 Manufacturer: Metav IndustryLine Weight: 0.6 kg Core specifications Probe diameter: 5.5 mm Cable length: 2000 mm (2 m) Monitor: 4.3‑inch LCD (480×854 px) Camera resolution: 1920×1080 px Battery capacity: 2600 mAh Runtime: approx. 5 h Special features IP68‑rated cable Dual camera probe Dimmable white LED illumination SD card slot (card not included) Accessories included: head cap, magnet cap, hook FAQ How long does the battery last under normal use? The internal battery of the Metav IndustryLine photo‑video endoscope provides approximately 5 hours of operation from a full charge under typical inspection conditions. Is the probe suitable for wet or submerged inspections? Yes, the cable is IP68‑rated, so the probe cable can be used reliably in wet or dirty environments typical of automotive and construction inspections. What level of image detail can be expected from the camera? The probe records at 1920×1080 pixels, offering clear detail suitable for fault detection and documentation; images are viewable on the 4.3‑inch colour LCD for immediate assessment. Can photos and videos be saved directly from the device? Yes, the unit includes an SD card slot for storing photos and video; an SD card is not included and should be supplied separately for long‑term documentation. Which accessories are supplied with the inspection kit? The delivery includes a head cap, magnet cap and hook to facilitate different inspection tasks and retrieval of small debris or components. What typical applications suit this inspection tool? The endoscope is optimised for visual checks in hard‑to‑reach areas such as engine internals, pipework, cavities in building structures and other confined spaces encountered in workshop and maintenance settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.5mm Camera Probe With Dimmable White LED, 12.7–305mm Depth Of Field, 60° Angle, IP67 - Metav IndustryLine
Take advantage of a slim, IP67-rated inspection probe with dimmable white-light LEDs and a broad 12.7–305 mm depth of field for dependable visual checks in confined spaces; order directly via Metav Werkzeuge or consult our specialists for system compatibility. Camera probe M503.175.1 — 5.5 mm inspection probe with IP67 and dimmable white LEDs (Metav IndustryLine) A Camera probe M503.175.1 designed for visual inspection in confined and hard-to-reach areas, suitable for industrial maintenance, assembly checks and quality control. Dimmable white-light LED illumination Robust IP67 protection rating Slim 5.5 mm inspection diameter 1,000 mm flexible probe length Engineered for precise confined-space inspection The slender 5.5 mm probe shaft and low weight (0.1 kg) make the device ideal for inspections where access is limited. A focal length of 50 mm combined with a 60° field of view delivers a practical balance between magnification and situational awareness, while the 12.7–305 mm depth of field ensures readable detail from close-up to moderate distances. These specifications translate into quicker defect detection and fewer repositioning cycles during routine checks. Reliable operation in demanding environments Rated IP67, the probe is dust-tight and suitable for temporary immersion, enabling inspections under wet or dirty conditions without risking the electronics. The 1,000 mm probe length provides reach for many applications while remaining manageable for single-person handling. Built with industrial use in mind, the construction supports repeatable measurements and visual checks on components, housings and assemblies where robustness and uptime are essential. Controlled illumination for consistent image capture Integrated dimmable white-light LEDs permit tailored lighting for reflective or dark surfaces, reducing glare and improving contrast on metal or composite parts. The camera module offers a standard 640×480 imaging resolution that, together with the adjustable illumination and focal characteristics, produces clear images for documentation and visual assessment. The lighting control assists in achieving consistent results across varied inspection scenarios. Simple integration and practical compatibility The probe is designed for integration with inspection setups and is listed as compatible with M503.171.0 and M503.172.0 devices, facilitating upgrade paths for existing systems. The compact form factor and standardised interface simplify mounting and handling, while the modest weight supports handheld and fixture-based use. For inspection workflows that demand repeatability and clear visual records, the probe provides a pragmatic component to the toolkit. For inspections that require a slim, IP67-rated probe with adjustable white-light illumination, contact Metav Werkzeuge to discuss the Camera probe M503.175.1 and its integration into existing inspection systems. Technical data SKU: M503.175.1 GTIN: 4054469167756 ECLASS: 21059058 Tariff number: 85229080 Facts Probe length: 1,000 mm Diameter: 5.5 mm Weight: 0.1 kg Field of view: 60° Focal length: 50 mm Depth of field: 12.7–305 mm Image resolution: 640×480 Protection class: IP67 Special features Dimmable white-light LED illumination Compatible with M503.171.0 and M503.172.0 devices Category: Optik Includes product images for reference FAQ Is the probe suitable for wet or dusty environments? Yes. The probe is IP67-rated, so the Camera probe M503.175.1 by Metav IndustryLine is dust-tight and protected against temporary immersion. What size of openings can it inspect? The probe's 5.5 mm shaft allows access into narrow bores and cavities; the 12.7–305 mm depth of field supports both close and moderate-distance inspection. Can the illumination be adjusted for reflective surfaces? Yes. The dimmable white-light LEDs on the Camera probe M503.175.1 enable fine control of brightness to reduce glare and improve contrast on reflective materials. What resolution does the camera provide? Image capture is provided at a standard 640×480 resolution, adequate for many visual inspection and documentation tasks. Is the probe compatible with existing inspection heads? Compatibility is specified for M503.171.0 and M503.172.0 devices, allowing integration with those inspection systems where applicable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.5mm Camera Probe With Dimmable White LED, 60° View, 50mm Focus, 12.7–305mm Depth, IP67 - Metav IndustryLine
Take advantage of the combination of precise illumination, robust ingress protection and a slim probe profile to simplify inspections in confined assemblies; order the camera probe directly via Metav Werkzeuge or ask the consultants for application advice. Camera probe for photo‑video endoscope, 5.5 mm, IP67 (Metav IndustryLine) A compact camera probe designed for visual inspection in narrow cavities, offering dimmable white‑light LEDs and a wide depth of field for versatile maintenance and quality control tasks. Dimmable white‑light LEDs 5.5 mm probe diameter IP67 protection rating 3 m cable for flexible positioning Precise lighting and clear image capture for confined inspections The inspection head combines dimmable white‑light LEDs with a 640×480 resolution sensor to produce stable, usable images even in poorly lit cavities. The 60° field of view and depth of field 12.7–305 mm permit both close‑up scrutiny and broader scene context without frequent refocusing, which shortens inspection cycles and reduces production downtime. The focal arrangement (focal length 50 mm) is tuned to balance magnification and working distance so that fine defects and surface conditions can be identified reliably. This optical specification supports repeatable assessments and aids documented quality control processes. Robust design and ingress protection for workshop environments Built to withstand workshop conditions, the inspection head meets IP67 rating for dust and temporary immersion, protecting electronics during routine maintenance tasks and cleaning procedures. The 5.5 mm slim probe profile allows access through small bores and tight joints where larger borescopes would be impractical, while the overall unit remains lightweight at 0.2 kg, aiding handheld handling and reducing operator fatigue. A 3 m cable provides flexible positioning and reduces the need to reposition machinery during inspections, supporting efficient workflow in both service and production settings. Practical integration and efficiency gains for inspection routines Compatibility with related inspection accessories is indicated for streamlined system integration (suitable for devices referenced as M503.171.0 / M503.172.0), enabling fast replacement or upgrades within existing setups. The combination of controlled illumination and a wide depth range reduces the number of passes required to complete a check, delivering a measurable time saving in inspection protocols. The compact Metav IndustryLine solution also supports documentation workflows by producing consistently lit images that simplify defect classification and reporting, improving traceability in maintenance and quality assurance tasks. For project enquiries and technical advice on the Metav IndustryLine camera probe, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored support and supply options Technical Data Article number: M503.175.3 GTIN: 4054469167763 Manufacturer: Metav IndustryLine Facts Probe diameter: 5.5 mm Cable length: 3 000 mm Weight: 0.2 kg Field of view: 60° Focal length: 50 mm Depth of field: 12.7–305 mm Resolution: 640×480 IP rating: IP67 Tariff number: 85229080 Image resolution asset: 640x480 Special features Dimmable white‑light LED illumination Suitable for M503.171.0 / M503.172.0 Category: Optics Compact probe head for narrow bores Robust sealing for moist and dusty environments FAQ What access does the probe’s diameter allow? The probe’s slim 5.5 mm diameter permits inspections through narrow bores and tight gaps that are inaccessible to larger inspection cameras; the camera probe M503.175.3 is therefore suitable for confined‑space visual checks. How does the adjustable illumination improve inspections? The dimmable white‑light LEDs enable control of light intensity to avoid glare on reflective surfaces and to reveal surface texture; this makes the Metav IndustryLine camera probe useful for both shiny and matt materials. Is the probe suitable for wet or dusty environments? Yes, the unit carries an IP67 rating, so the probe is protected against dust ingress and temporary immersion, supporting use in workshop, plumbing or field environments. What range can be inspected sharply with this probe? With a depth of field of 12.7–305 mm and a 60° field of view, the inspection head covers both very close features and larger internal areas without constant refocusing, which improves inspection speed and documentation quality. Can the probe be integrated into existing inspection setups? The camera probe is listed as suitable for the referenced devices M503.171.0 and M503.172.0, facilitating replacement or integration within compatible assemblies and inspection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.5mmx5m Inspection Camera With 4.3in Colour Monitor, Dimmable LED, SD Slot, IP68 - Metav IndustryLine
Take advantage of a compact inspection system that combines a bright 4.3″ colour display, a 5.5 mm × 5 m dual‑camera probe and IP68 protection for fast, reliable visual checks in confined spaces; order directly via Metav Werkzeuge or consult our specialists for application advice. Photo‑video endoscope M503.195 — 4.3″ colour monitor, 5.5 mm × 5 m dual‑camera probe (Metav IndustryLine) The Photo‑video endoscope M503.195 is a portable inspection camera for quick visual checks in pipes, hollow spaces and machine cavities, ideal for automotive and construction inspection tasks 4.3″ colour LCD monitor, 70° viewing angle 5.5 mm dual‑camera probe, 5 m cable length IP68‑rated cable for wet inspection Dimmable white LED illumination, SD storage slot Clear imagery for confined and complex inspections The inspection camera delivers detailed images thanks to a 1920×1080 camera sensor combined with a compact probe diameter of 5.5 mm, making it suitable for narrow bores and tight access points. A dedicated focus range of 4–500 mm supports both near and moderate‑distance detail capture, while the external 4.3″ LCD provides an immediately readable live image at a 70° viewing angle. These specifications translate into faster fault detection, reduced disassembly and fewer repeat inspections — a direct gain in operational efficiency for maintenance teams and site engineers. Portable, power‑capable and jobsite ready Weighing approximately 0.7 kg and fitted with a 5 m cable, the device is built for handheld mobility and extended use on the workshop floor. The integrated 2600 mAh battery offers around 5 hours of continuous operation per charge, enabling full‑shift checks without frequent interruptions. Illumination is handled by dimmable white LEDs on the probe, allowing light levels to be matched to reflective or dark interiors. Practical accessories such as the head cap, magnet cap and hook are included to simplify retrieval and positioning during inspections. Robust operation, simple data handling and practical accessories Designed for real‑world inspection conditions, the probe cable carries an IP68 rating, offering protection during wet or dusty examinations. Images and recordings can be saved to an SD card via the built‑in SD slot (SD card not included), facilitating documentation and handover of inspection results. The unit includes basic capture and playback functions on the colour monitor, and the supplied retrieval tools reduce the need for additional kit when fishing dropped items or orienting the camera. These features together support traceable, efficient inspection routines across workshops and site environments. Contact Metav Werkzeuge for tailored advice on how the Metav IndustryLine Photo‑video endoscope M503.195 can fit into inspection workflows and to arrange a purchase — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M503.195 GTIN: 4061905450099 Manufacturer: Metav IndustryLine Facts Display: 4.3″ LCD, viewing angle up to 70° Probe diameter: 5.5 mm Cable length: 5 m (5000 mm) Camera resolution (probe): 1920×1080 Monitor resolution: 480×854 Focus range: 4–500 mm Battery: 2600 mAh (~5 h runtime) Weight: 0.7 kg Ingress protection: IP68 (cable) Special features Dual cameras on probe for versatile viewing angles Dimmable white LED illumination on camera probe SD card slot for photo and video storage (SD card not included) Accessories included: head cap, magnet cap, hook Suitable for fast visual checks in hollow spaces and pipes (automotive, construction) Category: Optik FAQ What is the typical battery life for this inspection camera? The inspection camera runs on a 2600 mAh battery and provides approximately 5 hours of operation under normal usage conditions. Can the unit record photos and video directly? Yes. Images and videos can be saved to an SD card via the built‑in SD slot; the SD card is not supplied with the Photo‑video endoscope M503.195. Is the probe suitable for wet inspections and occasional immersion? The probe cable is rated IP68, which permits use in wet or dusty environments and supports inspections where water resistance is required. What inspection applications is this device intended for? The system is designed for quick visual checks in confined areas such as pipes, hollow bodies and machine cavities — common use cases include automotive inspections and on‑site building diagnostics. What accessories are supplied with the camera? The product is supplied with a head cap, magnet cap and hook to assist retrieval and positioning during inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m 8mm Inspection Camera With 4.3" Colour Monitor, Dual Cameras, Dimmable LEDs, SD Slot, IP68 - Metav IndustryLine
Take advantage of a compact inspection solution that combines a 4.3" colour monitor, an 8 mm probe and a 5 m cable for rapid visual checks in confined spaces; the IP68‑rated cable and dimmable LEDs ensure reliable imaging even in damp conditions. Order the device via Metav Werkzeuge or contact the team for purchase advice and specification matching. Metav IndustryLine Photo‑Video Endoscope M503.196 — 4.3" colour monitor, 8 mm probe (5 m) The Metav IndustryLine Photo‑Video Endoscope M503.196 is a portable inspection camera designed for quick visual checks in cavities, pipes and other hard‑to‑reach areas, suitable for automotive workshops and construction sites 4.3" LCD colour monitor, 70° viewing angle 8 mm probe with 5 m cable length IP68‑rated cable for wet environments SD slot for photo and video storage See into confined spaces with clean, usable images This compact inspection camera delivers a practical imaging workflow for routine checks and troubleshooting. The 4.3" LCD offers a wide 70° viewing angle, while the probe’s full‑HD capture capability ensures clear stills and video for documentation. The device suits fast visual inspections of cavities and pipes in automotive maintenance and building work, reducing downtime by making hidden faults visible without disassembly. With the integrated SD card slot images and clips can be saved on site for traceable records and later analysis, turning a simple visual check into verifiable evidence. Reliable illumination and flexible storage for on‑site documentation The probe is fitted with dimmable white LED lights, allowing the light level to be reduced in reflective or close‑range situations and increased for deeper cavities. A dual‑camera configuration supports different viewing angles or focal lengths for greater versatility during inspections. Recorded media can be stored directly on an SD card (card not included) and transferred via the monitor’s storage slot for archiving or reporting. The combination of adjustable lighting and onboard storage simplifies the inspection process and supports consistent, reproducible results. Built to withstand workshop and site conditions Durability is central to the design: the probe cable is IP68 rated, protecting the imaging system when working in wet or dusty environments, while a rechargeable 2600 mAh battery provides approximately 5 hours of operation on a full charge for extended, uninterrupted inspections. Supplied accessories—head cap, magnet cap and hook—expand functionality for retrieval and different inspection tasks. The system’s balanced weight and hand‑held monitor format keep handling straightforward during routine use, making the tool efficient for both bench work and field service. For purchase, technical matching or to discuss suitable accessories for specific inspection tasks, contact Metav Werkzeuge in Emmerich for expert advice and secure supply of the Metav IndustryLine inspection camera. Technical data Article number: M503.196 GTIN: 4061905450105 Brand: Metav IndustryLine Image file: m503192-main.png Monitor resolution: 480×854 px Probe camera resolution: 1920×1080 px Monitor size: 4.3" Cable length: 5 m Probe diameter: 8 mm Battery capacity: 2600 mAh Runtime: approx. 5 h Weight: 2 kg Viewing angle: up to 70° Focus range: 4–500 IP rating: IP68 (cable) Probe with dimmable white LED lights Dual camera probe SD card slot for photo/video (SD card not included) Supplied accessories: head cap, magnet cap, hook Suitable for quick visual checks in cavities and pipes (automotive, construction) FAQ Is the camera probe waterproof for use in damp environments? Yes. The cable is IP68 rated, so the probe assembly is designed for use in wet and dusty conditions as described for the Metav IndustryLine photo‑video endoscope M503.196. How long does the battery last on a single charge? The endoscope’s built‑in battery has a capacity of 2600 mAh and provides approximately 5 hours of operating time under typical conditions. Can images and videos be saved directly on the device? Yes. The device features an SD card slot for photo and video storage; the Metav IndustryLine inspection camera records media to an SD card (card not included). What diameter is the probe and how long is the cable? The probe measures 8 mm in diameter and is mounted on a 5 m cable, providing reach into narrow and moderately deep cavities. Are replacement probe heads or additional accessories available? Replacement and accessory options exist for the Metav IndustryLine unit; consult the product listing or technical literature for compatible caps and retrieval tools. What applications is this inspection camera suited to? The system is tailored for quick visual inspections in confined spaces such as engine bays, piping and structural cavities, commonly used in automotive maintenance and construction site surveys. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe With Dimmable White LED Illumination, 12.7–305mm Depth, 60° Field Of View, IP67 - Metav IndustryLine
Compact 9 mm diameter and IP67 protection combined with a 1,000 mm reach deliver reliable access to confined inspection spaces while maintaining robust environmental resistance; order the camera probe directly via Metav Werkzeuge or consult our specialists for application advice. M503.176.1 Camera probe – 9 mm diameter, IP67 inspection camera (Metav IndustryLine) M503.176.1 is a compact camera probe for photo‑video endoscopy, designed for narrow‑bore inspections and long‑reach visual checks in industrial and workshop environments. Slim 9 mm probe diameter Dimmable white LED illumination Wide observation depth 12.7–305 mm IP67 dust and water protection Precision access for narrow bores and long reach The 9 mm diameter housing offers a balance between minimal invasiveness and on‑board optics, allowing inspections of tight cavities, pipe interiors and assembly gaps where larger heads cannot enter. With a 1,000 mm length and a total weight of 0.2 kg, the probe provides extended reach without excessive operator fatigue. The slim profile reduces the risk of scratching internal surfaces while the lightweight construction supports handheld manoeuvrability and longer inspection cycles with minimal strain. Compatibility with existing inspection fixtures is supported: the probe is listed as suitable for use with M503.171.0 and M503.172.0 accessories, enabling integration into established workflows. Sharp images and adaptable lighting for reliable decisions Optical characteristics such as a 50 mm focal length, a 60° field of view and a working range of 12.7–305 mm ensure clear imaging across a useful depth gradient. The specified observation depth (working distance) means the camera will maintain focus for both close‑up detail checks and mid‑range component surveys without constant refocusing. Integrated dimmable white LEDs deliver controllable illumination so contrasts and surface conditions are revealed consistently; dimming prevents overexposure in reflective assemblies and preserves critical visual detail. These attributes translate into faster defect detection and fewer repeat inspections — a direct gain in throughput for maintenance and quality assurance operations. Robust design built for industrial conditions Rated IP67, the probe is dust‑tight and protected against temporary immersion, which suits applications in harsh or wet environments such as rinsing stations, engine bays and pipework. The sealed design helps prevent contamination of optics during routine use and supports cleaning procedures common in industrial settings. The housing and connector interfaces are engineered for workshop resilience while retaining precision optics; this combination reduces downtime caused by fragile inspection tools. The product is packaged and identified by SKU M503.176.1 and integrates into optical equipment lines categorised under industry standard eClass identifiers for simple procurement and inventory handling. How the probe improves inspection workflows By combining compact geometry, a long working reach and adaptable illumination, the device enables faster inspections with fewer tool changes. The probe’s specifications support repeatable visual records for quality documentation and simplify comparisons between inspection runs. For procurement teams and workshop managers the practical benefits are clear: reduced handling complexity, improved access to hidden areas and consistent image quality for assessment and reporting. The device is presented under the Metav IndustryLine portfolio, which emphasises readiness for industrial use and straightforward integration into a shopfloor inspection regime. Choose the Metav IndustryLine camera probe for dependable inspection access and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and ordering Technical data Article number: M503.176.1 GTIN: 4054469167770 Manufacturer: Metav IndustryLine Core specifications Diameter: 9 mm Length: 1,000 mm Weight: 0.2 kg Observation depth: 12.7–305 mm Focal length: 50 mm Field of view / angle: 60° Protection rating: IP67 Special features Dimmable white LED illumination Compatible with M503.171.0 and M503.172.0 eClass: 21059058 Customs tariff number: 85229080 Category: Optik FAQ What environments is this probe suitable for? The camera probe M503.176.1 (Metav IndustryLine) is rated IP67, making it suitable for dusty and temporarily submerged environments typical of workshop and industrial inspection tasks. What is the usable working distance and how does it affect imaging? The working range of 12.7–305 mm provides focused imaging from close detail work to mid‑range component checks; this range ensures both fine defect detection and broader area surveys without frequent refocusing. Can the probe be integrated with existing inspection fixtures? Yes — the probe is listed as compatible with M503.171.0 and M503.172.0 accessories, allowing straightforward integration into established inspection setups and fixtures in the Metav product family. How is illumination controlled for reflective or dark surfaces? Integrated dimmable white LEDs allow the lighting intensity to be adjusted to match surface reflectivity and ambient conditions, reducing glare and improving contrast for reliable visual evaluation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe with Dimmable White LED, 12.7–305mm Depth, IP67 - Metav IndustryLine
Take advantage of a compact design, IP67 protection and adjustable white-light illumination to inspect confined spaces reliably; the combination of 9 mm diameter, wide depth range and IP rating supports repeatable checks in production. Order the camera probe directly via Metav Werkzeuge or consult our specialists for configuration advice. Camera probe M503.176.4 — compact video endoscope probe with IP67 and dimmable LEDs (Metav IndustryLine) The Camera probe M503.176.4 is a robust video endoscope probe for internal visual inspection in assemblies, ducts and confined components, designed for industrial inspection and maintenance tasks. Compact 9 mm probe diameter Dimmable white LED illumination IP67-rated for dust and water protection 60° viewing angle, 12.7–305 mm depth Precise imaging where access is limited A slim probe body and focused optics enable clear visual checks in narrow bores and tight cavities. The slender 9 mm diameter combined with a focal field spanning 12.7–305 mm allows for both near and medium-range inspection without changing optics, reducing stoppages. The optical design with a 50 focal setting balances depth of field and detail resolution so that defects, assembly misalignments or foreign objects become identifiable at speed. This precision supports faster non‑destructive assessment and fewer reworks, improving throughput. Durable performance under industrial conditions Rated IP67, the probe tolerates dust ingress and temporary immersion, making it suitable for workshops and production environments where contamination or splash exposure occurs. Integrated dimmable white LEDs provide adaptable illumination, preventing overexposure on reflective surfaces and enabling consistent image contrast across materials. The 60° viewing angle captures broader fields without moving the probe excessively, while a 3 m cable length gives practical reach to inspection points. Together, these attributes ensure reliable, repeatable inspections that contribute to measurable quality control. Integration into inspection workflows and decision processes The probe is conceived as part of a practical inspection setup and interfaces with photo‑video endoscope systems to deliver live imaging for documentation and analysis. With a native resolution of 640×480 and standard video output, recorded sequences can be archived for traceability or forwarded to colleagues for rapid assessment. Compatibility with Metav inspection components and clearly documented identifiers such as SKU M503.176.4 and GTIN support streamlined procurement and asset tracking. For workshops seeking greater inspection coverage without complex retrofits, this probe offers a balanced solution between accessibility, robustness and imaging utility. For a tailored inspection setup or to discuss suitability for specific applications, contact Metav Werkzeuge in Emmerich to review the Metav IndustryLine camera probe M503.176.4 and receive hands‑on advice from our product specialists. Technical Data SKU: M503.176.4 GTIN: 4054469167923 Eclass: 21059058 Tariff code: 85229080 IP protection: IP 67 Diameter: 9 mm Viewing angle: 60° Depth of field: 12.7–305 mm Focal length: 50 Cable length: 3000 mm Illumination: dimmable white LEDs Resolution: 640×480 Numbers / Core technical data Diameter: 9 mm Cable length: 3 000 mm Viewing angle: 60° Depth of field: 12.7–305 mm Resolution: 640 × 480 pixels Special features IP67 ingress protection Dimmable white-light LED illumination Designed for photo-video endoscope use Suitable for integration with Metav inspection systems (see SKU) FAQ What environments is the probe suitable for? The probe’s IP67 rating makes the Metav IndustryLine video endoscope suitable for dusty workshops and locations where temporary water exposure may occur, allowing inspections in harsher production settings. What is the effective inspection range? The optical system provides a working range from 12.7 mm to 305 mm, enabling both close‑up checks and medium‑distance inspections with a 60° field of view for broader coverage. Can the illumination be adjusted to prevent glare? Yes, the integrated dimmable white LEDs enable fine control of light output to avoid reflections and to tailor contrast for different surface finishes and materials. What are the probe dimensions and reach? The probe measures 9 mm in diameter and is supplied with a 3 m cable, offering access to confined areas while maintaining a practical operating length. How is image quality recorded or reviewed? The probe delivers standard video output at 640×480 resolution suitable for live inspection, documentation and subsequent review within common inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe With Dimmable White LED, 12.7–305mm Focus Range, 60° View Angle, IP67 - Metav IndustryLine
Take advantage of a compact inspection head and robust protection rating for dependable in‑place visual checks. The combination of dimmable white LEDs and a 9 mm probe diameter enables clear imaging in tight assemblies while IP67 protection keeps the unit operational in harsh environments. Order the camera probe directly via Metav Werkzeuge or consult the technical team for application advice. Kamerasonde M503.176.3 — camera probe with dimmable white LEDs and IP67 protection The Kamerasonde M503.176.3 is a camera probe designed for photo‑video endoscope applications, optimised for visual inspection of confined components and assemblies. Dimmable white LED illumination 9 mm probe head for tight spaces IP67 protection for industrial use 3 m flexible cable for extended reach Reliable imaging in confined spaces for faster inspections The camera probe delivers a focused inspection capability from very close range through to a medium working distance thanks to a focal length of 50 mm and a depth of field of 12.7–305 mm. The 60° field of view balances situational awareness with detail, allowing clear capture of features without frequent repositioning. Integrated dimmable white LEDs provide adaptable illumination for variable surface finishes; lowering light intensity reduces glare on reflective parts, while higher output reveals textures and defects. This combination shortens inspection cycles and reduces the need for secondary checks. Built to withstand shop‑floor conditions and maintain uptime Robustness is a key contributor to reliable production flow. With an IP67 rating the probe head resists dust ingress and temporary immersion, making it suitable for workshop environments where exposure to coolant mist or particulate is likely. The unit weighs approximately 0.5 kg and is supplied with a 3 m connection, offering sufficient reach without excess bulk. These characteristics support continuous use during maintenance rounds and in‑process inspections, helping to avoid unexpected downtime and maintain quality control routines. Simple handling and clear image results for diverse applications The probe produces usable video at a resolution of 640 x 480 and connects into standard photo‑video endoscope setups; brightness is adjustable via the integrated LED control to match material reflectivity. The small 9 mm head accesses narrow bores and cavities that larger optics cannot, while the broad depth range reduces the need for minute focusing adjustments. The unit is listed under the optics category and is compatible with related system components, facilitating straightforward integration into existing inspection toolsets and reducing setup time for repetitive tasks. For reliable, compact inspections with a proven industrial probe, order the Kamerasonde M503.176.3 from Metav Werkzeuge or contact the Metav technical team in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M503.176.3 GTIN: 4054469167787 Manufacturer: Metav IndustryLine Numbers / Core technical data Diameter: 9 mm Cable length: 3 000 mm Weight: 0.5 kg Focal length: 50 mm Depth of field: 12.7–305 mm Field of view: 60° Resolution: 640 x 480 IP rating: IP 67 ECLASS: 21059058 Customs tariff number: 85229080 Designs / Special features Dimmable white LED illumination Intended for photo‑video endoscope use Suitable for tight cavities and bores Compatible with M503.171.0 / M503.172.0 Category: Optik Image assets available FAQ What environments is the probe suited for? The Kamerasonde M503.176.3 is designed for industrial environments and carries an IP67 rating, making the probe head resistant to dust and temporary immersion. What visual range can be expected from the probe? With a focal length of 50 mm and a depth of field from 12.7 to 305 mm, the probe provides usable imaging from very close‑up to several hundred millimetres for component inspection. Can the illumination be adjusted for reflective materials? Yes, the dimmable white LEDs on the camera probe allow brightness control to reduce glare on reflective surfaces and improve defect visibility. Is the probe compatible with existing endoscope systems? The unit is intended for photo‑video endoscope applications and is compatible with associated system components; check compatibility with models M503.171.0 and M503.172.0 where applicable. How long is the probe cable and how does that affect handling? The probe is supplied with a 3 m cable, providing reach for most bench and in‑situ inspections while maintaining manageable handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Camera Probe With Dimmable White LED, 50mm Focus, 12.7–305mm Depth, 60° FOV, IP67 - Metav IndustryLine
Compact, watertight inspection capability with dependable illumination: the combination of a 9 mm probe tip, IP67 protection and a 1,000 mm reach delivers repeatable access to confined spaces and reduces inspection downtime. Order the probe directly via Metav Werkzeuge or contact our consultants for application advice. Camera probe M503.176.2 — 9 mm diameter, IP67-rated inspection head (Metav IndustryLine) A compact camera probe M503.176.2 designed for close-up visual inspection in tight, wet or dusty environments, ideal for bores, assemblies and maintenance tasks 9 mm diameter for confined inspections IP67 protection for wet and dusty environments Dimmable white LED illumination 1,000 mm flexible probe length Precise access where space is limited The slim 9 mm probe head allows direct visual access into narrow bores, ducts and machine cavities that larger cameras cannot reach. By combining a small profile with a measured focal design, the unit keeps the image stable even in restricted geometries, which helps to reduce the number of repeat inspections and shortens fault-finding cycles. The compact construction is particularly beneficial for service engineers and maintenance teams who routinely inspect engines, valves or mould cavities and require consistent, readable images from hard-to-reach areas. Robust protection for workshop conditions Built for use in demanding environments, the inspection head carries an IP67 rating that protects against dust ingress and temporary immersion. The sealed design prevents contamination from coolant, cutting fluids or workshop dust, preserving optics and electronics and extending service intervals. With a 1,000 mm probe length, the assembly balances reach and handling: long enough for deeper inspections yet still manageable from a single attachment point, which supports quicker checks on assemblies without complex fixtures. Illumination and image geometry tuned for clarity Integrated dimmable white-light LEDs offer controllable lighting to match surface reflectivity and working distance, preventing overexposure on shiny metals and improving contrast on matt surfaces. The imaging chain with 640x480 resolution, combined with a depth of field 12.7–305 mm and a 50 mm focal length, provides a useful compromise between close-up detail and usable working distance. These characteristics ensure that features such as burrs, wear patterns or seal defects become visible without constant refocusing, which increases inspection throughput and decision confidence. Field-ready optics and practical integration A 60° viewing angle offers a wide observation cone that captures relevant context around a defect while still resolving fine detail at the centre of the image. The probe is supplied ready for integration with compatible inspection rigs and accessories and is marked for compatibility with referenced tooling where indicated. This flexibility supports diverse use cases, from assembly-line checks to portable service kits, enabling teams to adapt the probe to existing workflows and minimise additional equipment investment. Contact Metav Werkzeuge today for tailored advice and to arrange supply of the M503.176.2 camera probe through Metav Werkzeuge’s direct order channels Technical Data Article number: M503.176.2 GTIN: 4054469167916 ECLASS: 21059058 TARIC/Customs code: 85229080 Facts Probe length: 1,000 mm Probe diameter: 9 mm Viewing angle: 60° Focal length: 50 mm Depth of field: 12.7–305 mm Resolution: 640x480 IP protection: IP 67 Special features Dimmable white-light LED illumination Compatible with M503.173.0 Category: Optik FAQ What environments is the camera probe suited to? The camera probe M503.176.2 is designed for industrial environments and carries an IP 67 rating, making it suitable for dusty workshops and conditions with temporary immersion. Can the lighting be adjusted for reflective surfaces? Yes, the dimmable white-light LEDs allow illumination to be reduced or increased to avoid glare on reflective metals and to enhance contrast on dull surfaces. What inspection distances are supported by the optics? Optical design provides a usable depth of field from 12.7–305 mm, which supports both close-up detail work and slightly longer-range inspections without the need for frequent refocusing. Is the probe compatible with other inspection accessories? The probe is marked as compatible with referenced tooling entries (e.g., M503.173.0) and can be integrated into existing inspection rigs or portable kits where mechanical interfaces match. Which features make this probe suitable for maintenance teams? Maintenance teams benefit from the slim 9 mm diameter for confined access, the 1,000 mm reach for deeper inspections, and the sealed IP 67 construction that tolerates typical workshop contaminants. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Inspection Endoscope With Removable Wireless 5" LCD Monitor, 128MB Internal Storage, SD Slot, Rechargeable Battery - Metav IndustryLine
Take advantage of the combination of portable wireless transmission, a slim 9 mm probe and a detachable 5″ colour monitor to speed up fault finding and reduce inspection time; order through Metav Werkzeuge or consult their advisors for further assistance. Photo‑video endoscope M503.173.5 — 9 mm probe, removable 5″ wireless colour monitor (Metav IndustryLine) The Photo‑video endoscope M503.173.5 is a portable inspection camera designed for visual checks in confined spaces such as cavities and pipes, supplied with a detachable wireless 5″ colour monitor for immediate on‑site assessment. 9 mm inspection probe for confined spaces Removable 5″ LCD colour monitor with 4× zoom Wireless 2.4 GHz image transmission, up to 10 m Internal 128 MB memory plus SD card slot for images Fast, clear inspection where access is limited The 9 mm probe combined with a detachable 5″ colour monitor creates a compact, mobile solution for rapid visual inspection. Wireless transmission over 2.4 GHz to the monitor (range up to 10 m) removes cable clutter and permits work in awkward environments; the monitor supports digital zoom (1×–4×) and 180° image rotation, enabling quick orientation and detailed checks of suspect areas. Adjustable LED illumination at the probe tip ensures usable images even in poorly lit cavities, so reports and initial diagnoses can be produced on the spot without lengthy set‑ups. Secure recording, simple transfer and dependable power Integrated 128 MB internal memory and an SD card slot allow photos and video to be stored and transferred for documentation and traceability; an SD card is not included. The unit uses a rechargeable lithium battery with a mains adaptor for continuous operation and straightforward recharging between inspections. These features support efficient workflows in maintenance and service routines: images can be archived for quality records or forwarded to colleagues for immediate assessment, reducing error‑prone guesswork and repeated inspections. Practical design for workshop and field use With a 3 000 mm flexible insertion length and a slim 9 mm diameter, the probe reaches deep or narrow passages commonly encountered in vehicle engines, drainage systems and building services. The camera delivers a clear 800 × 480 display resolution on the detachable monitor, while wireless capability and a lightweight monitor enhance manoeuvrability during inspections. The construction suits routine diagnostic tasks in automotive and construction environments, streamlining fault localisation and shortening downtime through quicker decision making and better visual evidence. For reliable mobile inspections with Metav IndustryLine’s wireless photo‑video endoscope, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.173.5 GTIN: 4054469167572 eClass: 21059058 Tariff number: 85219000 Core specifications Probe diameter: 9 mm Insertion length: 3 000 mm Display: removable 5″ LCD colour monitor Display resolution: 800 × 480 px Wireless transmission: 2.4 GHz, range up to 10 m Digital zoom: 1×–4× Image rotation: 180° Internal memory: 128 MB SD card slot: yes (SD card not included) Power: rechargeable lithium battery and mains adaptor Features and functions Adjustable LED illumination at probe tip Photo and video capture and storage Removable monitor for team viewing or separate use Suitable for inspections in automotive and construction applications Wireless image transfer to detachable monitor SD card slot for simple file export FAQ What is the diameter of the inspection probe? The Metav IndustryLine photo‑video endoscope M503.173.5 features a 9 mm probe suitable for confined and narrow access inspections. How is the image transmitted and viewed? The Metav IndustryLine photo‑video endoscope M503.173.5 transmits images wirelessly over 2.4 GHz to the detachable 5″ colour monitor, with a maximum practical range of about 10 m and selectable digital zoom. Can images and video be stored and exported? Yes. The Metav IndustryLine photo‑video endoscope M503.173.5 provides 128 MB internal memory and an SD card slot for storing photos and video; an SD card is not supplied with the unit. What powers the inspection camera and how long can it run? The Metav IndustryLine photo‑video endoscope M503.173.5 is powered by a rechargeable lithium battery and can be charged via the supplied mains adaptor for continuous or repeated inspection sessions. Which applications suit this inspection tool best? The Metav IndustryLine photo‑video endoscope M503.173.5 is ideal for quick visual inspection of hard‑to‑reach areas such as cavities and pipes in automotive maintenance, building services and general on‑site diagnostics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Cable Ø5.5mm Camera Head Accessory With Screw-On Ring, Magnet, Hook Or 90° Mirror Attachment - Metav IndustryLine
Benefit from flexible inspection options with screw‑on ring, magnet, hook and 90° mirror attachments and a compact connection suited to Ø5.5 mm cables; this combination supports consistent imaging in tight or awkward positions. Order the accessory directly via Metav Werkzeuge or consult our advisors for compatibility details. Accessory for photo‑video endoscope M503.179.1 — Metav IndustryLine, screw‑on multi‑adapter for inspection optics A versatile Accessory for photo‑video endoscope M503.179.1 designed to adapt a camera head for confined inspections by accepting multiple screw‑on attachments and standard cable diameters, extending the scope of visual checks in maintenance and quality control. Screw‑on ring attachment for stabilised optics Magnet adapter for ferrous surfaces Hook attachment for retrieval or positioning 90° mirror for lateral viewing capability Flexible attachments for confined inspection tasks The accessory offers a selection of screw‑on interfaces — ring, magnet, hook and 90° mirror — which convert a single camera head into a multi‑purpose inspection tool. This modular approach reduces the need for multiple specialised cameras by enabling rapid reconfiguration of the optical end for lateral viewing, surface attachment or part manipulation. The result is a more efficient workflow and fewer instrument changes during troubleshooting or assembly checks. Consistent connectivity and reliable imaging in tight spaces Designed for compatibility with a compact cable connection of Ø5.5 mm, the adapter maintains a secure link between the camera and recording unit, reducing signal noise and mechanical play. The robust mechanical interface ensures repeatable alignment of the optical axis when switching between attachments, which supports consistent image capture and simplifies comparison of inspection records across several components or process runs. Built for workshop durability and straightforward integration Constructed for practical use in inspection and service environments, the adapter screws securely to standard camera heads and resists frequent handling. The ability to fit several mounted accessories means fewer tool changes and less downtime when inspecting assemblies, weld seams or internal passages. The modular design also facilitates straightforward storage and transport within existing inspection kits, supporting a more productive inspection routine. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine accessory M503.179.1 with existing inspection systems and to confirm fitment and delivery from Emmerich Technical data SKU: M503.179.1 GTIN: 4054469167855 ECLASS: 34590192 HS code: 85229080 Manufacturer brand: Metav IndustryLine Facts Cable diameter compatibility: Ø5.5 mm Type designation: 1+3 Category: Optics Image asset available: yes Special features Ring, magnet, hook or 90° mirror attachments screwable on the camera head Suitable for photo‑video endoscope applications Compact connector for tight‑space inspections FAQ What attachments are available for the accessory and how do they mount? The accessory for photo‑video endoscope M503.179.1 accepts screw‑on ring, magnet, hook and 90° mirror attachments that fasten directly to the camera head for rapid reconfiguration. Is the adapter compatible with standard endoscope cabling? Yes, the adapter is specified for a cable connection of Ø5.5 mm, ensuring a compact and secure link between camera and recorder for the Metav IndustryLine accessory. Can the accessory be used for lateral inspections inside narrow bores? The 90° mirror attachment enables lateral viewing and is suitable for inspections of confined or offset features when mounted on the camera head. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Flexible Kabel-Verlängerung
Detailinformationen: Hersteller: Metav IndustryLine Bezeichnung: Kabel-Verlängerung flexibel IP-Schutz: IP 67 Durchmesser: 7,8 mm bis 7,8 mm Anschluss: 18 Geeignet für: Foto-Video-Endoskop M503.171.0 und M503.172.0 Gewicht: 0,2 kg - 0,8 kg Länge: 1000 mm bis 4000 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Inspect confined interiors without dismantling parts
An industrial endoscope is an optical inspection device designed for non-destructive testing of hard-to-reach cavities, pipelines, machine interiors and complex castings. It consists of a flexible or rigid probe with integrated lighting and optics that relay images to a monitor or eyepiece, enabling visual assessment without dismantling the component. Using a borescope, inspection camera or videoscope reduces downtime and supports faster, evidence-based maintenance decisions.
How an endoscope supports metallurgy and maintenance workflows
For applications in industrial metallurgy and equipment upkeep, the endoscope allows visual control of internal surfaces for corrosion, wear, cracks or deposits. Modern digital models feature a high-resolution camera chip at the probe tip, adjustable LED lighting and the ability for image and video recording, which enables subsequent documentation and detailed fault analysis. Swivelling camera heads and compact construction permit efficient inspection of branched channels and confined geometries, improving process safety through early detection.
Practical advantages that matter on the shop floor
- Saves dismantling time and reduces production stoppages by enabling in-situ inspection.
- Improves diagnostic accuracy through high-resolution imaging and recorded evidence for traceability.
- Lowers maintenance costs by identifying faults early, extending component service life.
- Enhances accessibility with flexible or rigid probe options and swivelling camera head designs.
- Facilitates compliance and reporting via stored images and video documentation.
Metav as your precision partner for inspection equipment
Metav brings decades of specialist expertise and a wide, curated selection of workshop and measurement technology from its quality-controlled hub in Emmerich. With over 48,000 customers and more than 250,000 products, Metav acts as a reliable supply and technical filter for the European market, making advanced inspection tools such as endoscopes accessible for industry and trade. Choosing Metav means benefiting from consolidated sourcing, consistent product quality and practical guidance for selecting the right inspection camera for your needs.
Summary
An endoscope (borescope / inspection camera / videoscope) lets you inspect internal component surfaces quickly and non-invasively, delivering high-resolution visual data and recorded evidence that reduce downtime and support proactive maintenance.
FAQ
When should I choose a flexible endoscope instead of a rigid one?
Choose a flexible endoscope when access routes are curved or tortuous; a flexible probe and swivelling camera head permit navigation of pipelines and branched channels that a rigid instrument cannot reach.
Can an industrial endoscope record footage for later analysis?
Yes. Many industrial endoscopes offer image and video recording capabilities, allowing captured footage to be reviewed for detailed fault analysis and retained for documentation or compliance purposes.
How does adjustable LED lighting affect inspection results?
Adjustable LED lighting improves contrast and highlights surface defects; fine control over illumination helps to reduce reflections and reveal subtle corrosion, wear or deposits on internal surfaces.
Is an endoscope suitable for inspecting complex cast parts and machine interiors?
An endoscope is well suited to those applications. Its compact optics and probe designs enable visual checks of internal geometries in complex castings and machine housings without component disassembly.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com