Precision dial calipers for fast, error-free measurements
Dial calipers and precision calipers provide a mechanically reliable and highly readable solution for industrial metrology, using a dial that displays the millimetre fraction directly to reduce human reading errors and speed up repetitive inspections. Their hardened stainless steel construction and rack-and-pinion transmission ensure absolute play-free linear motion and lasting dimensional stability, while features like a locking screw and adjustable bezel enable consistent zeroing and secure retention of measured values. Ideal for workshop and quality-control environments, these tools deliver improved throughput and traceable accuracy for component inspection thanks to robust shock-protected mechanisms and precise graduations.
10 mm Bore Centre Measuring Insert 60° Length 70 mm, For Caliper Adapter - Metav IndustryLine
Take advantage of the reliable combination of precise 10 mm bore spacing, 60° indexing and a compact 70 mm length for repeatable jigging and inspection tasks; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Bore‑centre distance measuring insert 10 mm — measuring adapter insert for calipers, 60°, 70 mm (Metav IndustryLine) The Bore‑centre distance measuring insert 10 mm is an accessory for caliper measuring adapters, engineered to deliver a fixed 10 mm spacing at a 60° orientation for workshop and inspection applications. Precisely set 10 mm bore spacing 60° indexing for repeatable alignment 70 mm hardened length for stability Ø5 shank for standard caliper adapters Repeatable positioning for high‑throughput inspection The measuring insert provides a mechanically fixed reference for bore‑centre checks, eliminating time spent re‑setting fixtures. With a defined 10 mm centre distance and 60° indexing, the component converts a hand caliper into a quick verification tool that supports consistent results across repeated measurements. The compact 70 mm body reduces lever effects, enhancing contact stability and contributing directly to faster process throughput and fewer measuring errors. Easy integration with existing caliper adapters Designed for straightforward mounting, the insert uses a Ø5 shank to mate with standard caliper adapters and mounting plates. Compatibility with analogue calipers and adapter systems allows the accessory to be introduced without additional fixtures or calibration changes, preserving workshop workflows. The low mass (approximately 0.05 kg) minimises added inertia on the measuring instrument, keeping handling comfortable during repetitive tasks. Practical benefits for everyday metrology tasks By providing a fixed template for small bore patterns, the insert simplifies verification of jigs, small assemblies and production parts where a 10 mm spacing is required. The robust 70 mm length and precise indexing reduce setup variance, so quality checks become faster and more reliable. Use cases include first‑article inspection, in‑process sampling and quick assembly validation where speed and repeatability are paramount. The accessory complements standard caliper toolsets and supports traceable workflows when used alongside Metav’s calibration services. For targeted bore‑centre checks with Metav IndustryLine quality, request the measuring insert from Metav Werkzeuge or speak to our advisors at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M240.323 GTIN: 4054469159553 Label: Bore‑centre measuring insert 10 mm, 60°, length 70 mm Eclass: 21170324 TARIC / HS code: 90178090 Brand: Metav IndustryLine Numbers / Core technical data Length: 70 mm Bore‑centre spacing: 10 mm Indexing angle: 60° Mounting shank diameter: Ø5 mm Weight: 0.05 kg Special features / Design Compatible with caliper adapters for 10 mm fittings Suitable for analogue calipers and adapter systems Compact, low‑mass design for handheld use Intended for bore‑centre verification and fixture checks FAQ What does the insert measure and how is it used? The measuring insert establishes a fixed 10 mm bore‑centre distance at 60° and is fitted into a compatible caliper adapter to provide rapid verification of small hole patterns. Which calipers are compatible with this adapter insert? Compatibility is with caliper systems that accept a Ø5 accessory shank; the design is optimised for standard analogue caliper adapters used in workshop metrology. Is the insert suitable for repetitive production checks? Yes, the fixed geometry and compact 70 mm length ensure repeatable positioning, making the insert appropriate for repetitive inspection and in‑process sampling. Does the product include traceable identification like GTIN or article number? The insert is supplied with GTIN 4054469159553 and article number M240.323 for inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a finely balanced combination of precision, compact handling and durable design for repeatable workshop measurements; order the instrument directly via Metav Werkzeuge or consult the experts for application advice. Metav IndustryLine Dial Caliper 0–100 mm, 0.02 mm graduation The Metav IndustryLine dial caliper that delivers compact, high‑precision measuring for fine mechanical and watchmaking applications. Analogue dial with 0.02 mm graduation Four-way measurement capability (4 functions) Compliant with DIN 862 standard Delivered in protective case for transport Precision where small tolerances matter The instrument offers a measuring range of 0–100 mm with a graduation of 0.02 mm, placing it in the compact/high‑precision class for fine mechanical work. Conformity with DIN 862 ensures standardised construction and measurement practice so that results are comparable across jobs and teams. The analogue dial readout with a 32 mm dial provides a clear visual reference for rapid checks, while the mechanical design keeps readings stable under frequent use. This makes the caliper particularly useful for repetitive quality control tasks where a reliable analogue indication is preferred. Practical handling and transport advantages Engineered for comfortable single‑hand operation, the gauge combines a lightweight frame (approx. 0.2 kg) with stiff jaws to reduce bending during short spans. The jaw geometry (30/19 mm) suits both external and internal measuring tasks on small components. A thread table on the reverse face adds practical reference data at the workbench, and delivery in a protective case ensures safe transport and storage between shifts. These design choices reduce set‑up time and protect the measuring face, supporting faster throughput in workshop workflows. Versatile measuring functions adapted to fine work Equipped for four‑way measurement — external, internal, depth and step — the instrument covers the common tasks encountered in watchmaking, toolmaking and precision component inspection. The analogue mechanism avoids battery dependence and offers tactile feedback when contacting surfaces, which some technicians prefer for delicate parts. As a compact precision tool, it suits bench checks, assembly inspection and incoming goods control where space is limited but accuracy must be maintained. Contact Metav Werkzeuge for tailored advice or to secure the Metav IndustryLine dial caliper with protective case for precise workshop measurement and dependable delivery from Emmerich. Technical data SKU: M202.020 GTIN: 4054469102160 ECLASS: 21170344 Norm: DIN 862 Label: Uhren-Messschieber 100x0,02mm Facts Measuring range: 0–100 mm Graduation / resolution: 0.02 mm Dial diameter: 32 mm Weight: 0.2 kg Special features Analogue dial display Four-way measurement: internal, external, depth, step Protective case for transport Thread table on reverse Designed for watchmaking and fine mechanics FAQ What measurement range and resolution does this caliper provide? The Metav IndustryLine dial caliper offers a measuring range of 0–100 mm and a graduation of 0.02 mm, suitable for fine mechanical tolerances. Is the instrument suitable for internal and depth measurements? Yes — the caliper supports four‑way measurement (external, internal, depth and step), making it versatile for inspection and assembly tasks. Does this model comply with recognised standards? The instrument is manufactured in accordance with DIN 862, ensuring standardised dimensions and measuring practice for workshop use. Will the caliper arrive ready for use and protected in transit? Delivery includes a protective case for transport; the Metav IndustryLine caliper is supplied ready for workshop deployment and safeguarded against handling wear. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Long 5mm Diameter Scribing and Measuring Tip for Caliper Adapter - Metav IndustryLine
Take advantage of the combination of extended reach, a precise 5 mm tip and lightweight handling for accurate workshop marking and repeatable measurements; order the accessory via Metav Werkzeuge or contact our consultants for application advice. Measuring and scribing tip M240.320.1 — long 5 mm Ø scribing accessory by Metav IndustryLine The Measuring and scribing tip M240.320.1 is a long, 5 mm Ø marking probe designed for use with caliper measuring adapters, delivering extended reach for marking and measurement tasks in workshop metrology and production inspection Long 5 mm tip for extended reach Precision marking for workshop metrology Lightweight 0.05 kg for minimal deflection Extended reach for precise marking A long, slim scribing probe provides access to recesses and hard-to-reach edges that standard caliper jaws cannot reach. The combination of a 5 mm diameter tip and a 120 mm overall length reduces the need for repositioning, so marking and measuring steps are faster and more consistent. For tasks where a clear line or centre mark is required before machining, the extended probe shortens cycle times while keeping the marking position steady. Stable alignment and repeatable results Geometry and mass distribution matter for repeatability: a slender probe with a low mass produces less bending and inertia during handling. At approximately 0.05 kg, the tip keeps the overall tool balance favourable, reducing measurement variation caused by deflection. When used with a caliper adapter, the design supports repeatable alignment between the caliper and the workpiece, which is critical for serial marking and when multiple setups must match. Seamless integration with caliper adapters The accessory is intended for mechanical calipers and mounting adapters commonly used in shop environments. Its form factor is compatible with standard caliper adapter fittings, enabling quick attachment and removal without modification. This compatibility makes the probe suitable for marking, centre-punch transfer, and preparatory checks directly from a caliper-based setup, streamlining workflows where a separate marking tool would otherwise be required. Robust for routine workshop use Built as a straightforward shop-floor accessory, the probe focuses on function and durability rather than unnecessary complexity. The simple, analogue nature makes it easy to maintain and to incorporate into existing measuring routines. For workshops that value efficient fixturing and minimal handling overhead, the tip delivers practical benefits: less time aligning, more time machining, and fewer measurement interruptions. Choose the Metav IndustryLine long measuring and scribing tip for reliable extended-reach marking and order it through Metav Werkzeuge; for specification questions or application guidance contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M240.320.1 GTIN: 4054469159539 Article: Measuring and scribing tip for caliper adapter, long Ø 5 mm, length 120 mm Core measurements Tip diameter: 5 mm Overall length: 120 mm Weight: 0.05 kg Customs tariff number: 90178090 Features and compatibility Accessory for calipers / caliper adapter mounting Analogue scribing / marking probe Category: Accessories (Measuring devices → Accessories) Brand: Metav IndustryLine FAQ Is the tip compatible with standard caliper adapters? The Measuring and scribing tip M240.320.1 is designed for use with standard caliper measuring adapters and fits common adapter fittings used in workshop metrology. What is the diameter of the scribing tip? The tip has a diameter of 5 mm, which provides a fine but robust contact point for marking and alignment tasks. How long is the probe and how heavy is it? The probe measures 120 mm in overall length and weighs approximately 0.05 kg, offering extended reach with minimal added mass. Can this accessory be used for repetitive marking operations? Yes. The probe’s shape and low mass reduce deflection, supporting repeatable marking and consistent transfer measurements in serial workflows. Is the accessory suitable for use directly on the shop floor? The M240.320.1 is intended as a practical workshop accessory: simple, robust and easy to mount for routine marking and preparatory measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Internal Groove Measuring Insert For Caliper Adapter 1.2mm Width - Metav IndustryLine
Take precision where space is restricted: the combination of compact design, a secure Ø5 mm shank interface and defined groove geometry allows reliable, repeatable internal-groove checks from 40 mm. Benefit from a lightweight 70 mm probe that minimises operator fatigue and keeps set-up fast. Order the internal-groove measuring insert directly via Metav Werkzeuge or ask our consultants if needed. Internal groove measuring insert M240.326 — caliper adapter probe, 1.2 mm width (Metav IndustryLine) The Internal groove measuring insert M240.326 is a specialist measuring tip for use with caliper adapters, engineered to inspect internal grooves from 40 mm with a maximum depth of 13 mm and a nominal groove width of 1.2 mm. For internal grooves from 40 mm Max groove depth 13 mm Groove width 1.2 mm Ø5 mm shank for adapter Lightweight 50 g Accurate groove measurement where space is limited The insert converts a standard caliper into a dedicated groove probe, allowing precise checks of recesses without the need for larger, more complex fixtures. With a defined groove width 1.2 mm and a max groove depth 13 mm, the tip delivers repeatable contact geometry that reduces measurement scatter and improves comparability between readings. The geometry is optimised to sit securely in the groove flank so that a single, controlled contact produces a verifiable reading rather than a variable result caused by inconsistent probing angles. Secure mounting and repeatable handling for fast inspection cycles A Ø5 mm shank ensures a tight, wobble‑free connection to compatible caliper adapters, while the 70 mm length gives enough reach for most assemblies without sacrificing stiffness. The low weight (0.05 kg) makes handling light and reduces the effect of operator force during manual measurement. Together these attributes support short set‑up times and repeatable positioning, which is particularly valuable for batch inspections and spot checks on the production line. Practical use cases and workshop advantages Designed as an accessory for inspection and quality control, the probe is suitable for groove verification in components and assemblies where access is restricted. The compact measuring tip is ideal for checking grooves in housings, bearing seats and small machined components. As an accessory class product within the metrology toolkit, it complements standard calipers and adapters to extend measuring capability without the need for dedicated groove gauges, helping to keep the tool inventory efficient and adaptable. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm adapter compatibility and arrange supply of the M240.326 internal groove insert Technical data Article number: M240.326 GTIN: 4054469159584 Category: Accessories Tariff number: 90178090 Core measurements Length: 70 mm Weight: 0.05 kg Shank diameter: Ø5 mm Max groove depth: 13 mm Groove width: 1.2 mm Special features For internal grooves from 40 mm Intended for use with caliper adapters Analog accessory for manual inspection Lightweight probe for reduced handling fatigue FAQ What groove dimensions can this insert measure? The insert is designed for internal grooves from 40 mm in diameter, with a maximum depth of 13 mm and a nominal groove width of 1.2 mm; these parameters define the intended measurement range for the M240.326. Which adapters and calipers are compatible? Compatibility is achieved via the Ø5 mm shank interface; the insert fits standard caliper adapters that accept a Ø5 mm probe shank and is intended for manual caliper-based inspection setups. How does the insert improve repeatability compared with ad‑hoc probing? By providing a defined contact geometry and a stable Ø5 mm connection, the probe reduces lateral play and inconsistent contact angles, leading to more repeatable readings during routine checks. What applications are typical for this measuring tip? Typical uses are groove inspection in housings, bearing seats and small machined components where access is limited and a compact, repeatable measuring tip is required for quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Caliper Jaw Adapter For 3.5mm Max Jaw Thickness, Attachment For Caliper Measuring Faces - Metav IndustryLine
Take advantage of precise retrofitting and compact design to expand measuring capability on standard calipers; compatibility with 150 mm instruments and a maximum jaw thickness of 3.5 mm make this accessory a practical workshop upgrade. Order the attachment directly via Metav Werkzeuge or consult the Metav team for integration advice. Measuring adapter for calipers M240.310.1 — retrofit for 150 mm calipers (Metav IndustryLine) A Measuring adapter for calipers M240.310.1 that converts standard caliper jaws into a focused contact point for small or awkward measurements, intended for workshop and inspection use. Adapter for 150 mm calipers Accepts jaw thickness up to 3.5 mm Lightweight, approx. 50 g Retrofits to analogue caliper jaws Improve measurement capability with a compact retrofit This adapter extends the usefulness of standard calipers by providing a secure contact point where the original jaws are too broad for fine features. Designed for compatibility with calipers that measure up to 150 mm, the attachment keeps additional mass to a minimum (approx. 0.05 kg), so measuring behaviour and hand balance remain close to normal. The limited jaw-thickness allowance of 3.5 mm ensures a snug fit on common caliper jaws and reduces the risk of lateral play, supporting more repeatable contact and faster setup when switching between general and fine measurements. Save time through straightforward installation and consistent results Fitting the adapter is a quick retrofit that integrates with analogue calipers without the need for special tools. The adapter’s mounting interface (mounting Ø 5 mm) aligns with standard jaw geometries, enabling a reliable mechanical coupling that speeds up routine checks and reduces handling time. As a simple accessory, it preserves the original instrument’s measuring sequence while extending its reach into smaller-diameter bores or narrow grooves, delivering a direct workflow benefit in everyday machine‑shop and inspection tasks. Dependable workshop accessory backed by Metav quality Manufactured for practical use and frequent handling, the attachment supports sustained inspection cycles while remaining unobtrusive in the tool kit. The design emphasises stable contact over decorative features, helping to avoid measurement artefacts caused by uneven jaw contact. Metav’s role as a precision partner means the accessory is part of a broader range aimed at making precise measurement affordable and reliable for workshops; the M240.310.1 is therefore a straightforward choice when consistent contact points and quick retrofits are required. Contact Metav Werkzeuge for tailored advice or to reserve the M240.310.1 measuring adapter for workshop use; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M240.310.1 GTIN: 4054469167527 ECLASS: 21131720 Category: Accessory Facts Suitable for calipers up to 150 mm Max jaw thickness 3.5 mm Mounting diameter Ø5 mm Weight 0.05 kg Harmonised tariff code 90178090 Special features Attachment for caliper jaws Designed for analogue calipers Lightweight retrofit accessory Intended for workshop inspection tasks FAQ How is the adapter attached to a caliper? The adapter is clamped onto the caliper jaw and secured using the standard jaw geometry; the M240.310.1 is designed to fit jaws up to 3.5 mm in thickness and aligns via a Ø5 mm mounting interface. Is the adapter suitable for digital calipers? The accessory is primarily specified for analogue calipers; it can fit some digital models if the jaw form and thickness comply, but compatibility should be verified against the caliper jaw profile before use. What measurements become easier with this accessory? By providing a focused contact point, the attachment helps when measuring small bores, grooves or external features that are otherwise difficult to reach with full-width jaws, improving repeatability in these tasks. What are the identifying details for ordering? The product is listed as M240.310.1 (SKU M240.310.1) with GTIN 4054469167527 and a net weight of approximately 0.05 kg. Is the adapter delivered with a calibration certificate? This is an accessory for caliper jaws and is supplied without a calibration certificate; calibration considerations apply to the primary measuring instrument rather than the attachment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper 0.01mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
A compact and robust dial caliper that pairs a 0–150 mm measuring range with a 0.01 mm resolution and a clear Ø 38 mm dial, offering dependable repeatability for routine inspection; order the caliper directly via Metav Werkzeuge or consult our specialists for application-specific advice Dial caliper M202.030 — 150 mm range, 0.01 mm resolution (Metav IndustryLine) Dial caliper M202.030 is a precision 150 mm measuring instrument with an analogue dial display, designed for standard workshop and machine‑building measurements 150 mm measuring range with 0.01 mm resolution Ø 38 mm dial for fast, clear readings Four measurement functions for versatile inspection Complies with DIN 862 for workshop use Precise, repeatable readings for everyday quality checks The analogue dial design provides a tactile, immediate indication of measurement changes, while the calibrated 0–150 mm scale and 0.01 mm graduation ensure measurements are both precise and repeatable. Compliance with DIN 862 gives a familiar reference for industry users and supports consistent quality control across production runs. This balance of resolution and robustness makes the instrument suitable for process control where quick verification and visual confirmation are needed, helping to reduce rework and speed decision‑making on the shop floor. Practical features that save time during inspection tasks Equipped with a Ø 38 mm dial, the instrument facilitates rapid reading of small increments, especially in environments where lighting or vibration can hamper fine visual checks. The caliper supports four measurement functions — external, internal, depth and step measurements — so a single tool covers the most common inspection tasks. A thread reference table on the reverse gives immediate access to basic thread data, while the 40/20 mm jaw geometry accommodates both coarse and finer workpieces without the need to change tools, streamlining bench routines. Designed for the workshop — the right compromise of reach and stiffness Classified in the Standard range for calipers, the instrument delivers the typical trade‑off between reach and rigidity that is ideal for general machine and metalwork: enough span for most components yet compact enough for one‑hand handling. The analogue mechanism favours durability and a straightforward service life in demanding environments. Backed by the Metav IndustryLine offering and its quality filter in Emmerich, the tool is positioned as a practical precision instrument that supports reliable measurement workflows in both maintenance and production settings. For workshop teams looking for a robust, high‑resolution dial caliper, contact Metav Werkzeuge in Emmerich for detailed specifications or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M202.030 GTIN: 4054469102177 ECLASS: 21170344 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Dial diameter: 38 mm Standard: DIN 862 Special features Analog dial caliper Four measurement functions: external, internal, depth, step Thread table on reverse side Jaw lengths: 40/20 mm Category: Caliper FAQ What measurement tasks does this caliper cover? The M202.030 dial caliper from Metav IndustryLine supports external, internal, depth and step measurements, making it suitable for standard inspection tasks in machine shops. How precise is the instrument for routine checks? With a resolution of 0.01 mm and compliance with DIN 862, the M202.030 provides fine graduations for accurate bench and assembly work. Is the dial easy to read in workshop conditions? Yes — the caliper features a Ø 38 mm dial that improves legibility and enables quick visual confirmation in typical shop lighting. Does the caliper include additional reference information for threads? A thread reference table is fitted on the reverse side of the instrument for quick checks during preparation and verification tasks. Which product identifier should be used when ordering or requesting documentation? Please refer to article number M202.030 (GTIN 4054469102177) when contacting Metav IndustryLine for orders or technical data Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper 0.01mm Resolution, Four‑Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from precise, repeatable measurements thanks to a 0.01 mm reading and robust DIN 862 conformity; the combination of fine resolution and practical workshop range keeps production tight and inspection straightforward. Order the caliper directly via Metav Werkzeuge or ask our advisers for application guidance. Uhren-Messschieber TOP 150x0,01mm — Dial caliper with 0.01 mm resolution by Metav IndustryLine The Uhren-Messschieber TOP 150x0,01mm is an analogue dial caliper designed for precise external, internal, depth and step measurements in workshop and fine-mechanical environments. Dial reading 0.01 mm accuracy Four measuring functions included 150 mm range, workshop standard Locking screw for repeatable measurements Precision that supports decisive inspection results The instrument delivers a 0.01 mm indication on a clear analogue dial, enabling fine adjustments where tolerances matter. Conformity with DIN 862 signals a manufacturing and inspection standard commonly required in metalworking and quality control, so measurements taken with this caliper form a sound basis for acceptance or further machining. The mechanical dial avoids battery dependence while the scale layout supports quick visual checks during serial work. Versatile measurement capability for everyday workshop tasks With a measuring span of 150 mm, this tool falls into the standard range for general machine and metalworking tasks, offering a balanced reach and stiffness for typical components. The caliper provides four measuring functions, covering external, internal, depth and step operations, and incorporates a locking screw for repeatable setups. The reverse side includes a thread table for quick reference, making the device a compact all-rounder for assembly, servicing and component inspection. Robust handling and readable operation for repetitive tasks An oversized 38 mm dial improves legibility, which reduces interpretation errors during repetitive inspections and speeds up process throughput. The analogue construction and solid clamping mechanism contribute to a tactile measuring feel that many technicians prefer for routine checks. Backed by Metav IndustryLine production, the caliper is suited for workshop use where dependable, straightforward instruments keep measurement tasks efficient and auditable. Contact Metav Werkzeuge in Emmerich to discuss suitability for specific applications or to request the Metav IndustryLine dial caliper (SKU M202.140) with a 0.01 mm dial reading — info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: M202.140 GTIN: 4054469102351 Manufacturer: Metav IndustryLine Facts Range: 0–150 mm Resolution: 0.01 mm Dial diameter: 38 mm Weight: 0.34 kg eClass: 21170344 TARIC/HS: 90173000 Special features Analogue dial display Four measuring functions: internal / external / depth / step Locking screw for repeatable measurements Thread table on reverse side Compliant with DIN 862 FAQ Is this caliper suitable for fine mechanical or watchmaking tasks? The Uhren-Messschieber TOP 150x0,01mm provides a 0.01 mm dial readout and precise jaw geometry, making it appropriate for fine mechanical tasks where sub-hundredth millimetre visibility is required. Which measurement types can be performed with this instrument? The caliper supports four measuring functions — external, internal, depth and step measurements — enabling versatile inspection with a single analogue tool. Does this caliper meet common metrology standards? Yes, the instrument is produced in accordance with DIN 862, ensuring it meets established workshop and inspection requirements. Does the caliper require batteries for operation? No — the device uses an analogue dial, so it operates without batteries and is ready for immediate use on the shop floor. What are the product identifiers for ordering or traceability? Ordering and traceability use SKU M202.140 and GTIN 4054469102351; the caliper is offered under the Metav IndustryLine brand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper 0.02mm Resolution Three-Point Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Choose dependable, precise measurement with a clear Ø38 mm dial and 0.02 mm resolution; engineered to the DIN 862 standard and equipped for four‑way measurement, this caliper supports consistent workshop inspection. Supplied in a protective transport case for safe handling. Order the dial caliper directly via Metav Werkzeuge or ask our consultants if needed. Dial caliper 150 x 0.02 mm — Metav IndustryLine (analog) The Dial caliper 150 x 0.02 mm is an analog workshop caliper designed for precise inside, outside, depth and step measurements across general metalworking and quality control applications. Dial display Ø38 mm for clear readings Resolution 0.02 mm for fine measurements Four-way measurement capability Delivered in protective case for transport Precision that suits routine inspection An analogue instrument built to deliver measurable improvements in repeatability: the large Ø38 mm dial provides rapid readability, while the fine 0.02 mm graduation reduces interpretation error compared with coarser mechanical scales. Conformity with DIN 862 ensures compatibility with standard metrology procedures and makes the device suitable for workshop inspection tasks where consistent, verifiable results are required. The instrument’s simple mechanical design minimises electronic failure modes, offering reliable long‑term operation in standard production environments. Practical reach and robust handling for everyday tasks With a measuring span of 0–150 mm, this caliper sits in the workshop’s universal range, balancing reach with rigidity so that most components—small fixtures, housings and assemblies—can be checked single‑handed. Jaws with 40/20 mm lengths handle both broad and narrow contact points; a thread conversion table located on the reverse face assists rapid reference without additional charts. Supplied in a protective transport case, the tool stays protected in transit and on busy shop floors, reducing downtime from accidental damage. Clear benefits for productivity and quality assurance Four‑way measurement (inside, outside, depth and step) streamlines inspection workflows by avoiding instrument changes between operations, improving throughput and reducing the chance of handling errors. The analogue dial readout gives an immediate visual confirmation of deviation, which aids quick go/no‑go decisions on the shop floor. For procurement and workshop managers, the instrument represents a straightforward way to enforce measurement discipline: dependable mechanics, an intuitive display and robust standards conformity combine to lower rework rates and support traceable quality procedures. For dependable workshop measurement choose the Metav IndustryLine dial caliper; contact Metav Werkzeuge for order details or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M202.031 GTIN: 4054469102191 Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.02 mm Dial diameter: 38 mm Customs tariff: 90173000 Eclass: 21170344 Special features Analog dial display Four-way measurement: inside, outside, depth, step Jaw lengths: 40/20 mm Thread table on reverse side Delivered in transport case FAQ What measurement range does the caliper cover? The dial caliper covers a measuring range of 0–150 mm, making it suitable for standard machine‑shop and metalworking tasks. What resolution and reading accuracy can be expected? The instrument provides a 0.02 mm graduation; readings are taken from the analogue dial with a Ø38 mm display for enhanced legibility. Is the caliper suitable for inside and depth measurements? Yes, the caliper supports four‑way measurement—inside, outside, depth and step—so it removes the need for multiple instruments for common inspections. Does the tool include any practical references on the body? A thread table is printed on the reverse side to assist with fast reference during setup and checks. Is a protective case included for transport and storage? The caliper is supplied in a protective transport case to reduce the risk of damage during handling and transit. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper 0.05mm Graduation, Four‑Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Reliable workshop measurement and repeatable readouts make this dial caliper a practical choice for routine and precision tasks; combine the 150 mm measuring range with a 0.05 mm graduation for dependable results in assembly and quality control. Order the caliper directly via Metav Werkzeuge or consult the technical advisors for specification alignment. Dial Caliper M202.035 — 150 mm range, 0.05 mm graduation, 38 mm dial The Dial Caliper M202.035 is an analogue precision caliper designed for standard workshop and machine‑shop applications, offering a robust 150 mm measuring range with a clear 38 mm dial for rapid readings. Analogue dial reading, 0.05 mm graduation 150 mm measuring range for standard workshop tasks Four measurement functions enabled Conforms to DIN 862 for reliable results Consistent accuracy for everyday workshop use The instrument is tailored to the standard caliper class with a 0–150 mm range, which offers the best balance between reach and rigidity for common machine‑shop and metal‑working tasks. The 0.05 mm graduation on the dial provides a readable resolution for routine inspection and assembly, while conformity with DIN 862 underlines its suitability for shop‑floor checks and component acceptance. This balance reduces downtime arising from repeated re‑measurements and supports a steady production flow. Clear analogue readout and ergonomic handling A 38 mm dial gives immediate visual feedback, reducing reading errors during repetitive tasks; the analogue mechanism is straightforward to use and requires no batteries, making it a reliable option for continuous operation. The caliper combines a smooth sliding action with a thumbroller for controlled traversing, which helps to maintain consistent contact pressure and improves measurement repeatability. The analogue display is especially useful where digital displays are unnecessary or where simple, fast checks are preferred. Four measuring functions and practical workshop benefits Equipped for inside, outside, depth and step measurements, the caliper covers the core measuring tasks expected in general engineering and maintenance workshops. The presence of a thread‑pitch table on the reverse adds practical reference value for mechanical work that involves fasteners. As an analogue dial instrument aligned with recognised standards, it is a dependable tool for initial quality control, fixture setup and daily inspection routines where clarity and robustness matter most. For a dependable analogue solution with workshop‑grade robustness, contact Metav Werkzeuge to arrange supply of the Dial Caliper M202.035 or to verify compatibility with specific inspection protocols. Technical Data Article number: M202.035 GTIN: 4054469102245 ECLASS: 21170344 Customs tariff number: 90173000 Standard: DIN 862 Facts Measuring range: 0–150 mm Graduation: 0.05 mm Dial diameter: 38 mm Four measuring functions: inside, outside, depth, step Special features Analogue dial caliper design Sliding thumbroller for controlled traverse Thread‑pitch table on reverse side Workshop and machine‑shop application focus FAQ What resolution does the caliper provide? The Dial Caliper M202.035 features a 0.05 mm graduation on its analogue dial, offering clear incremental readings suitable for standard workshop measurement tasks. Which measuring tasks are possible with this instrument? Inside, outside, depth and step measurements are supported, enabling versatile use across inspection, setup and maintenance jobs. Is the caliper suitable for machine‑shop use? Yes — with its 150 mm range and conformity to DIN 862, the caliper is designed for everyday machine‑shop and metal‑working applications where robustness and repeatable readings are required. How does the dial size affect usability? The 38 mm dial improves readability at a glance, which speeds up repetitive checks and reduces the risk of misreading small graduations during production tasks. Does the caliper include practical reference aids for workshop use? The reverse side incorporates a thread‑pitch table, offering convenient on‑the‑job reference for common fastener pitches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper Three-Point 0.02mm Resolution 4‑Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of 0.02 mm dial resolution, four-function measurement capability and a robust locking screw for repeatable workshop results; order the instrument directly via Metav Werkzeuge or ask our consultants for application advice. Dial caliper "TOP" 150 x 0.02 mm — analogue dial caliper, DIN 862, Metav IndustryLine The Dial caliper "TOP" 150 x 0.02 mm is an analogue measuring instrument designed for precise external, internal, depth and step measurements in standard workshop environments, offering a compact reach with industry‑standard accuracy. 0.02 mm resolution analogue dial Four-function measurement capability Conforms to DIN 862 standard 38 mm dial with robust locking screw Precision where workshop reliability matters The instrument provides a 0.02 mm reading increment on a clear analogue dial, supplying measurable precision for everyday production control. Built to the requirements of DIN 862, this caliper sits in the Standard measuring class (0–150 mm range) that balances reach and stiffness, making it suitable for general machining and metalworking tasks where repeatable dimensional checks are required. The mechanical design reduces dependency on electronics and ensures consistent operation in typical shop environments. Four measurement modes for practical versatility Equipped for internal, external, depth and step measurements, the tool supports a wide variety of inspection tasks without changing instruments. The four‑function measurement capability is complemented by 40/20 mm jaws, which optimise access to narrow and stepped features, while the integrated lock screw secures the slider during transfer or set‑up. A thread table printed on the reverse provides quick reference for common fastener sizes, improving throughput when measuring components related to threaded assemblies. Readability and handling engineered for everyday use The large 38 mm dial improves legibility under workshop lighting, and the instrument’s analogue display gives tactile feedback preferred for certain inspection routines. The design minimises operator variability: the dial readout and positive stop allow controlled measurements, and the compact slider geometry supports single‑handed operation. As an analogue, battery‑free caliper, it removes downtime associated with power sources and is immediately ready at the bench. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine dial caliper suits specific inspection tasks and to arrange supply directly from our Emmerich stock. Technical data Article number: M202.131 GTIN: 4054469102283 Classification: 21170344 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–150 mm Resolution: 0.02 mm Dial diameter: 38 mm Reading type: analogue Scale standard: DIN 862 Special features / Versions Four‑function measurement: external, internal, depth, step Jaw length: 40/20 mm Locking screw included Thread table on the reverse side Analogue dial display FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–150 mm and is classified in the Standard range suitable for general machine and metalwork inspections. Which measurement types are possible with this instrument? The device supports external, internal, depth and step measurements thanks to its four‑function measurement configuration. What level of accuracy and readability can be expected? Readability is 0.02 mm via the analogue dial; the instrument is built to DIN 862 standards for reliable workshop accuracy. Is the dial easy to read in a busy workshop? Yes — the instrument features a 38 mm dial that improves visibility and aids quick interpretation of measurements under typical workshop lighting. Which SKU should be referenced when ordering or checking stock? Reference SKU M202.131 for ordering and GTIN 4054469102283 for logistics or inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper Three-Point Measuring, 0.02mm Resolution, DIN 862, Delivered Calibrated In Case - Metav IndustryLine
The combination of a robust analogue dial, 0.02 mm readability and the four measuring functions makes this caliper an efficient choice for routine workshop and quality‑control tasks; order directly via Metav Werkzeuge or contact the consultants for specification guidance. Dial caliper TOP 150 x 0.02 mm — analogue workshop caliper with 150 mm range The Dial caliper TOP 150 x 0.02 mm is a standard 150 mm dial caliper designed for machining and inspection tasks, offering fine 0.02 mm graduations and a compact design for everyday workshop use. 150 mm measurement range 0.02 mm readout precision Four measuring functions included Locking screw for stable readings Reliable precision for everyday quality control This standard‑range caliper delivers consistent measurements across common workshop tasks thanks to its 150 mm measuring span and a fine 0.02 mm dial resolution. Compliance with DIN 862 ensures measurements meet established workshop norms, which supports traceable inspection routines and makes integration into existing quality processes straightforward. The instrument is particularly suited to machine shops and metalworking environments where repeatability and a compact footprint are priorities. Robust mechanics that reduce measurement variability The analogue dial and mechanical design focus on reproducibility: a 38 mm dial provides clear indication, while the locking screw secures the slider for repeat readings and transferred measurements. Jaw lengths of 40/20 mm offer a practical balance between reach and rigidity for typical outside and inside checks. A thread‑table on the reverse face gives quick reference data during set‑up, reducing lookup time and improving throughput during batch inspection. Versatile four‑function measurement accelerates inspection workflow Equipped for outside, inside, depth and step measurements, the caliper replaces multiple single‑purpose tools and speeds up inspection cycles on assemblies and machined parts. The analogue readout requires no batteries, making it a low‑maintenance instrument for shop floors where continuity of service is essential. Practical features such as the clear dial, secure clamp and compact form factor translate directly into shorter measuring sequences and fewer handling errors during repetitive checks. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine dial caliper into inspection routines — +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M202.141 GTIN: 4054469102368 eClass: 21170344 Norm: DIN 862 Measurements & accuracy Measuring range: 0–150 mm Readability: 0.02 mm Dial diameter: 38 mm Jaw length: 40/20 mm Features & special functions Analogue dial display Four measuring functions: outside / inside / depth / step Locking screw for slider fixation Thread table on reverse side Mechanically driven indicator (no battery required) FAQ What measuring tasks is this caliper intended for? The Dial caliper TOP 150 x 0.02 mm is intended for general workshop and quality‑control measurements, covering outside, inside, depth and step checks typical in machining and metalworking. What level of precision can be expected from the instrument? The instrument provides a 0.02 mm readout and is manufactured to meet DIN 862, making it suitable for standard industrial inspections where a 0.02 mm resolution is required. Does the caliper require batteries or special maintenance? No batteries are required for the analogue dial display; routine maintenance consists of keeping the slide clean and lightly lubricated and checking the locking screw for secure clamping. Can the caliper be used for internal and external threads? Yes — the caliper supports outside and inside measurements and includes a thread table on the reverse side for quick reference when assessing threaded features. Is this instrument suitable for shop‑floor use? Designed with a robust mechanical dial and locking screw, the caliper is suitable for regular shop‑floor use where reliable, battery‑free measurements are preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper Top, 0.01mm Resolution, Four-Point Measuring, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of workshop-ready precision and practical handling: the high-resolution 0.01 mm dial and the clear 38 mm indicator provide repeatable results across internal, external, depth and step measurements; the locking screw and protective case support reliable transport and routine use. Order the caliper directly via Metav Werkzeuge or consult the advisors for application guidance. Watchmaker caliper "TOP" 150 x 0.01 mm — Metav IndustryLine dial caliper with 38 mm dial The Watchmaker caliper "TOP" 150 x 0.01 mm is an analogue dial caliper designed for precise everyday measurements in machine shops and fine mechanical work, covering the standard workshop range. High-resolution 0.01 mm dial reading Four measurement functions 38 mm clear mechanical dial Locking screw for repeatable readings Precision where standard workshop measurements matter This analogue dial caliper delivers a 0.01 mm reading increment on a 38 mm dial, combining traditional mechanical reliability with fine resolution. Built to DIN 862, the instrument sits in the Standard range (measuring range 0–150 mm), which balances reach and rigidity for most machine‑shop and metalworking tasks. The mechanical dial mechanism avoids electronic dependencies while still permitting precise, repeatable readings; the result is a tool suited to both production checks and fine adjustment tasks where stable, verifiable figures are required. Repeatable handling and transport-ready design A firm locking screw secures the slide for repeat measurements and safe transfer between stations, while the included protective case ensures the caliper remains protected in transit. The reverse side features a compact thread chart, useful for quick reference in workshop settings. Together these elements reduce handling errors and speed up routine inspections, supporting a steady workflow and fewer interruptions for recalibration or adjustment. Versatile measurement capabilities for everyday workflows Equipped for internal, external, depth and step measurements, the caliper replaces multiple single‑purpose gauges and condenses inspection tasks into one instrument. Its analogue format makes it particularly attractive where tactile feedback and simple maintenance are preferred over electronic systems. As a practical tool in assembly, servicing and quality checks, it complements digital metrology in an integrated workshop environment and supports consistent output across small to medium batch runs. Contact Metav Werkzeuge for tailored advice or to arrange supply from Emmerich — the Metav IndustryLine Watchmaker caliper "TOP" 150 x 0.01 mm is supplied in a protective case and ready for immediate workshop use Technical data Article number: M202.130 GTIN: 4054469102276 Brand: Metav IndustryLine Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Dial diameter: 38 mm Measuring functions: 4 Customs tariff number: 90173000 Special features Analogue dial caliper (mechanical) Four measurement functions: internal, external, depth, step Locking screw for repeatable positioning Thread chart on reverse side Delivered in protective case Special version designation: TOP FAQ What reading accuracy does the caliper provide? The Watchmaker caliper "TOP" 150 x 0.01 mm gives a reading increment of 0.01 mm and is manufactured to meet DIN 862 workshop standards. Can this instrument perform depth and step measurements? Yes, the dial caliper supports internal, external, depth and step measurements, consolidating common inspection tasks in one tool. Is the caliper suitable for general machine‑shop use? With a measuring range of 0–150 mm and a robust mechanical dial, this Standard‑range caliper is well suited to everyday machine‑shop and metalworking measurements. Does the product come with a protective case? The caliper is supplied in a protective case for transport and safe storage, supporting secure handling between workstations. Does the caliper include a thread reference or scale? A thread chart is printed on the reverse side of the caliper for quick workshop reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Caliper With Concealed Rack, 0.02mm Vernier, Four-Function Measurement, Hardened Stainless Steel, Plastic Case - Metav IndustryLine
Combine fully hardened stainless steel construction with a concealed rack and a vernier resolution of 0.02 mm for repeatable, fine‑mechanical measurements; order the caliper directly via Metav Werkzeuge or consult the technical advisors for specification matching. Uhren-Messschieber M202.231 — Watchmaker caliper with concealed rack and 0.02 mm vernier The Uhren-Messschieber is a precision watchmaker caliper engineered for fine mechanical and micro‑assembly measurement tasks, offering a compact Standard range ideal for bench work and small components. Concealed rack, dust-resistant design Vernier accuracy 0.02 mm Four-way measurement functions Hardened stainless steel construction Compliant with DIN 862, incl case Precise measuring performance for micro and bench work Equipped with a mechanical vernier that reads to 0.02 mm, this instrument provides one of the finer analog resolutions available for mechanical calipers, meeting the expectations of watchmaking and precision assembly. The tool supports four-way measurement — external, internal, depth and step — enabling a single gauge to replace multiple items in a small workshop. Conformance with DIN 862 ensures the measuring method and scale layout are consistent with industrial practice, giving a clear technical basis for quality control and traceable comparison. Durable, workshop-ready construction for reproducible results The frame and jaws are manufactured from fully hardened stainless steel, which increases wear resistance and maintains jaw alignment under frequent use. A concealed rack reduces exposure to dust and swarf, extending service life and lowering maintenance needs while preserving measurement reliability. Practical details such as the printed thread chart on the reverse of the scale and the compact jaw lengths (40/30 mm) enhance handling and make repeated measurements less error‑prone in daily workshop routines. The caliper is supplied in a protective transport case to safeguard the instrument during storage and transit. Intuitive handling and clear data for efficient workflow As an analog precision caliper, the instrument combines tactile control with immediate numerical feedback from the vernier scale; this favours operators who prefer direct mechanical reading without electronic dependencies. Classified as a Standard range caliper (0–150 mm), it balances reach and stiffness, making it suitable for both watchmaking and general mechanical workshops that require reliable, repeatable results. For further technical clarification or to confirm fit‑for‑purpose within a metrology routine, the Metav technical team is available to advise on integration and calibration options. For specification matching or a detailed consultation about the Metav IndustryLine watchmaker caliper, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M202.231 GTIN: 4054469102399 Category: Messschieber Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution / reading: 0.02 mm Jaw lengths: 40/30 mm Measuring functions: external, internal, depth, step Reading type: Analog vernier Special features Material: stainless steel, fully hardened Concealed rack for dust resistance Thread chart printed on reverse Supplied in a protective transport case Classified as Standard range caliper for workshop use FAQ What is the measuring range and resolution? The measuring range is 0–150 mm with a vernier reading of 0.02 mm; the Uhren-Messschieber M202.231 is therefore suitable for fine, repeatable measurements within that span. Can this caliper be used for internal and depth measurements? Yes — the instrument offers four measurement functions (external, internal, depth and step), making it versatile for both watchmaker and general bench applications. Is the caliper suitable for dusty workshop environments? The concealed rack design reduces dust ingress and mechanical contamination, improving longevity and maintaining measurement reproducibility under typical workshop conditions. Does the product comply with recognised standards? The caliper is manufactured to the conventions of DIN 862, which governs caliper scale layout and measurement practice. What accessories or documentation are included? Delivery includes the caliper, a protective transport case and a printed thread chart on the reverse of the scale; further calibration documentation is not indicated for this listing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 mm Bore Distance Measuring Insert 60° Length 70 mm, For Caliper Adapter - Metav IndustryLine
Compact, precise and workshop-ready: the insert for 20 mm bore spacing at 60° with a 70 mm insertion length enables reproducible checks of hole patterns and straightforward adapter fitment — order the component via Metav Werkzeuge or consult our specialists for compatibility. Bore-spacing measuring insert 20 mm — measuring insert for caliper adapter, 60°, 70 mm length (Metav IndustryLine) Bore-spacing measuring insert 20 mm for caliper adapter — a compact metrology accessory tailored to check hole centres and angular offsets on small assemblies with a rigid 70 mm reach For Ø20 mm bore spacing at 60° 70 mm insertion length for extended reach Ø5 mounting shank for standard adapters Lightweight 0.05 kg for easy handling Reproducible bore-centre checks for small assemblies This measuring insert turns a standard caliper adapter into a dedicated tool for verifying 20 mm bore spacing at 60°, providing a quick and repeatable method to confirm hole patterns without bespoke fixtures. The accessory is designed for straightforward alignment with an adapter, so typical inspection tasks in quality control or assembly become more efficient. By avoiding improvised gauging solutions, production checks gain in repeatability and throughput, while measurement uncertainty is reduced through consistent mechanical fit. Compact design that reaches where it matters With a 70 mm insertion length and an Ø5 mounting shank, the component offers access into recesses and across small assemblies while remaining simple to handle. The modest mass (0.05 kg) contributes to easy mounting and minimal loading on the caliper adapter, keeping the measuring chain stable during manual checks. The compact form factor is especially useful in bench-level inspections and during set-up of jigs where a slim, rigid probe is preferable to larger instruments. Practical fitment and workshop applications Suited for use with caliper adapters that accept an Ø5 shank, this insert is a practical addition for workshops and inspection benches that perform repeated hole-centre verifications. Typical applications include component incoming inspection, prototype checks and fast in-line spot checks where a dedicated gauge would be impractical. Metav IndustryLine supplies this accessory as part of a broader range that aims to make high-quality metrology accessible for the workshop environment, supporting reliable supply and transparent order handling from Emmerich. Contact Metav Werkzeuge to confirm adapter compatibility or to request delivery from our Emmerich warehouse; our specialists will advise on integration and availability Technical information Article number: M240.324 GTIN: 4054469159560 ECLASS: 21170324 SKU: M240.324 Core data Length: 70 mm Weight: 0.05 kg Mounting diameter: Ø5 Analog: yes Special features For Ø20 mm bore spacing at 60° For caliper adapter (20 mm) Category: Measuring devices / Accessories Tariff number: 90178090 FAQ What bore spacing and angle does the insert check? The insert is designed for a 20 mm bore spacing at 60°, enabling direct verification of that hole pattern. Which mounting interface is required for use with adapters? The component uses an Ø5 mounting shank and is intended for caliper adapters that accept that diameter. Is the insert suitable for handheld caliper inspections? Yes — the lightweight design (0.05 kg) and 70 mm reach make it appropriate for bench and handheld checks when used with a compatible adapter. Can this insert be used with analogue calipers? The accessory is compatible with caliper adapters for analogue and digital calipers, provided the adapter accepts an Ø5 shank and the caliper provides stable seating. What is the article number or SKU for ordering? The article number and SKU is M240.324 for ordering and stock reference. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.01mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from the combination of a 0.01 mm dial readout, a 0–200 mm measuring range and four measurement modes for dependable workshop results; order the Dial Caliper "TOP" directly via Metav Werkzeuge or consult the company's advisors for application-specific guidance. Dial Caliper "TOP" — 0–200 mm, 0.01 mm dial readout (Metav IndustryLine) A Dial Caliper "TOP" designed for precise mechanical measurements in general workshop and fine‑mechanical tasks, offering a robust analogue dial and standard 0–200 mm range. Mechanical dial readout, 0.01 mm resolution External, internal, depth and step measuring Standard 0–200 mm range per DIN 862 Locking screw and thread table on reverse Precision where it counts: accurate analogue measurement for production The instrument delivers a 0.01 mm readout via a clearly graduated dial readout, providing consistently reproducible values for routine quality control and assembly work. Built to the DIN 862 standard, the caliper combines a standard 0–200 mm measuring span with a compact dial that gives crisp, mechanical feedback without reliance on batteries. This makes the tool particularly suitable for environments where reliability and simple, repeatable measurement are required; the analogue display reduces the risk of electronic failure and keeps calibration procedures straightforward. Practical versatility: four measuring functions for everyday tasks With four measurement functions — external, internal, depth and step — the caliper is a versatile companion for general machine‑shop tasks and small‑parts inspection. The pair of precision jaws (50/24 mm tip configuration) and the depth probe cover common workshop situations, while the locking screw secures the slider for transfer measurements. The reverse side carries a thread table to aid quick reference when working with threaded parts, reducing time spent consulting separate charts and improving workflow efficiency on the shop floor. Designed for handling and long‑term dependability A robust mechanical design with a 38 mm dial face and a single‑turn indicator provides an intuitive reading experience and fast cross‑checks during series work. The analogue caliper is easy to operate with one hand and its simple construction minimises downtime and maintenance needs — a practical advantage for busy production lines. Supplied with a protective transport case, the tool is ready for workshop use and safe storage between jobs, supporting good workshop practice and repeatable measuring conditions. For tailored advice on integrating the Dial Caliper "TOP" into existing inspection routines, contact Metav Werkzeuge to discuss specifications and suitability for your applications. Technical data Article number: M202.134 SKU: M202.134 GTIN: 4054469102337 Type: Dial caliper (analog) Measuring range: 0–200 mm Resolution/readout: 0.01 mm Standard: DIN 862 Facts Dial diameter: 38 mm Jaw length: 50/24 mm Measuring range max: 200 mm Readout resolution: 0.01 mm Special features 4-function measuring: external, internal, depth, step Locking screw Thread table on reverse side Supplied in protective transport case Analogue dial with single-turn indicator Conforms to DIN 862 FAQ How accurate is the Dial Caliper "TOP" for everyday workshop use? The Dial Caliper "TOP" provides a mechanical readout to 0.01 mm and conforms to DIN 862, offering the accuracy expected for standard workshop quality control and assembly tasks. Can the caliper measure internal and depth dimensions as well as external ones? Yes, the instrument supports external, internal, depth and step measurements, making the Dial Caliper "TOP" a versatile tool for a wide range of measuring tasks. Is the caliper ready for use straight away and how is it supplied? The Dial Caliper "TOP" is supplied ready for workshop use and comes in a protective transport case for secure storage and safe handling between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.01mm Resolution, Four‑Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Combining 0.01 mm resolution, a 38 mm precision dial and reliable four-way measurement capability, this dial caliper delivers repeatable results across standard workshop tasks; order the dial caliper (SKU M202.034) directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Dial Caliper M202.034 — 0–200 mm, 0.01 mm resolution, 38 mm dial A dial caliper (M202.034) designed for precise workshop and quality-control measurements across the standard 0–200 mm range. Dial caliper 0–200 mm, 0.01 mm resolution 38 mm dial for quick, precise visual readings Four measurement functions: inside, outside, depth, step Conforms to DIN 862, robust workshop standard Precision that speeds quality control The instrument features a 0.01 mm graduation that supports fine inspection tasks while remaining intuitive for routine checks. The analogue dial gives an immediate visual confirmation of the measurement and avoids battery dependency, so shifts and repeated cycles in workshop environments remain uninterrupted. Built to the DIN 862 standard, the tool bridges bench-top accuracy and shop-floor robustness, enabling faster in-process verification without recourse to more elaborate metrology equipment. Built for workshop reliability and repeatability Mechanical construction prioritises stable jaw alignment and low play, which reduces measurement scatter during repetitive checks. The 38 mm dial enhances readability under varied lighting, while the solid slide action keeps readings steady when handling medium-sized components. This combination of visible feedback and mechanical stability translates into fewer re-measures and a smoother production workflow, especially where consistent tolerances are required across a batch. Versatile measurement for everyday tasks Equipped for four-way measurement — external, internal, depth and step — the caliper covers the most common inspection routines without swapping tools. The standard 0–200 mm range places it in the universal workshop category, offering the best compromise between reach and rigidity for typical machining, assembly and maintenance applications. A thread reference table on the reverse face supports quick cross-checks during fittings and fastenings, reducing the time spent searching for specifications. Practical aids that shorten cycle time Design details such as a clear dial, concise graduations and accessible jaws facilitate swift clamping and reading of parts, helping to cut inspection times. The mechanical nature of the device means minimal maintenance: occasional cleaning and light lubrication keep the slide accurate over long service intervals. For teams that value dependable, low-complexity tools, this caliper supplies straightforward, traceable measurement capability without the overhead of electronic systems. For dependable workshop metrology choose the Metav IndustryLine dial caliper M202.034 — contact Metav Werkzeuge for tailored advice and procurement from Emmerich. Technical data SKU: M202.034 GTIN: 4054469102238 Eclass: 21170344 Article number: M202.034 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Dial diameter: 38 mm Weight: 0.47 kg Standard: DIN 862 Special features Analogue dial caliper Four measurement functions: outside, inside, depth, step Thread table on reverse side Mechanical construction for workshop use FAQ Is this caliper suitable for general workshop use? Yes. The Metav IndustryLine dial caliper M202.034 is designed for standard workshop applications with a 0–200 mm range and conforms to DIN 862. Can this caliper perform internal and depth measurements? Yes. The caliper supports four measurement functions — external, internal, depth and step — enabling versatile checks without additional tools. Does the instrument require batteries? No. The analogue dial mechanism on the caliper operates mechanically and does not need batteries, ensuring continuous operation in production settings. How fine are the graduations and what accuracy can be expected? The caliper offers a 0.01 mm graduation; combined with its mechanical stability and DIN 862 conformity, it is well suited for routine precision control in a workshop environment. Is there any reference information on the tool itself for thread sizes? Yes. A thread table is provided on the reverse side of the instrument to assist with quick checks during assembly and maintenance tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Delivered in Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement (0.02 mm), a 200 mm measuring range and four measurement functions for reliable workshop control and repeatable results; order the instrument directly via Metav Werkzeuge or consult the Metav advisers for specification support. Metav IndustryLine Dial Caliper M202.033 – 200 mm, 0.02 mm resolution The Metav IndustryLine Dial Caliper M202.033 is a compact analogue caliper designed for standard machine‑shop and precision metalwork measurements, offering versatile inner, outer, depth and step measurement capability. 200 mm measuring range according to DIN 862 0.02 mm graduation with 38 mm dial Four measurement functions: inside, outside, depth, step Robust analogue movement for workshop use Proven fit for everyday workshop measurement needs This dial caliper sits in the standard measurement class (measuring range up to 300 mm), delivering the preferred balance of reach, stiffness and one‑hand usability for general machine‑ and metalwork. The 200 mm range covers the most common inspection tasks while retaining the handling characteristics that make quick checks and routine quality control efficient. Compliance with DIN 862 gives a recognised baseline for expectations in industrial environments and helps ensure compatibility with established measuring procedures. Reliable precision and clear readout for repeatable results With a 0.02 mm graduation presented on a 38 mm dial, the instrument provides a clear visual indication of fine increments while the analogue mechanism keeps the measurement chain straightforward and dependable. The caliper supports four measurement functions — outer, inner, depth and step — so a single tool can replace several more specialised gauges, reducing time spent switching instruments and improving process flow. The combination of high resolution and a substantial dial diameter simplifies reading in workshop conditions where speed and clarity matter. Durable construction and practical handling features The analogue drive is engineered for smooth sliding action and positive locking, giving dependable repeatability without the need for power sources; the analogue display means no batteries are required. Practical details such as the jaw geometry (schnabellänge 50/22 mm) and a thread table on the reverse add day‑to‑day usefulness for machining and inspection tasks. The mechanical design focuses on long service life and straightforward maintenance, so uptime in production or the toolroom is maximised. Where this caliper excels in application This instrument is particularly suited to workshops that require a blend of fine measurement capability and robust tool life: bench work, small assembly lines, fixture adjustment and precision repair all benefit from the instrument’s precision and versatility. Its analogue nature makes it ideal where a simple, low‑maintenance measuring tool is preferred over electronic devices, and the sizeable dial keeps readings accessible even under demanding shop conditions. For a tailored recommendation or to purchase the Metav IndustryLine dial caliper (SKU M202.033), contact Metav Werkzeuge for expert advice from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M202.033 GTIN: 4054469102221 eClass: 21170344 Tariff code: 90173000 Facts Measuring range: 0–200 mm Graduation: 0.02 mm Dial diameter: 38 mm Standard: DIN 862 Special features Analogue dial display (no batteries) Four measurement functions: inside, outside, depth, step Jaw length: 50/22 mm Thread chart on reverse side Analogue (mechanical) operation FAQ What measurement functions are available with this caliper? The caliper offers four functions — outside, inside, depth and step measurement — enabling versatile use with the Metav IndustryLine dial caliper M202.033. What resolution and dial size does the instrument provide? Readings are at 0.02 mm graduation on a 38 mm diameter dial, giving a clear, fine incremental display suitable for workshop inspection. Is the caliper compliant with recognised standards? Yes, the tool is specified to DIN 862, which aligns it with common industrial measuring requirements for calipers in the standard class. Does the caliper require batteries or electrical power? No — the analogue dial mechanism of this caliper operates mechanically and requires no batteries, simplifying maintenance and ensuring readiness. Is there any reference information on the tool itself to aid selection? A thread chart is printed on the reverse side of the instrument, and jaw geometry (50/22 mm) is indicated to assist with application planning for common workshop tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper 0.02mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from the combination of 0.02 mm reading accuracy, a clear analog dial and practical four‑way measurement for reliable, repeatable checks in everyday workshop use. Order directly via Metav Werkzeuge or consult their advisors for application support and purchasing. Dial Caliper "TOP" 200 x 0.02 mm — Analog dial caliper, DIN 862 compliant The Dial Caliper "TOP" 200 x 0.02 mm is an analogue dial caliper designed for standard workshop measurement tasks, offering straightforward readability and robust mechanical operation according to DIN 862 Analog dial display, 0.02 mm resolution Measuring range 0–200 mm, standard class Four-way measurement capability Locking screw, thread table on reverse Accurate measurements that reduce rework and downtime The instrument is built for precise repeatability in routine inspection tasks: the 0–200 mm range places it in the standard caliper class, which balances reach and stiffness for most machine‑shop and metal‑fabrication work. With a calibrated reading step of 0.02 mm, the device provides clear, comparable results for external, internal and depth checks, helping to cut rework and accelerate quality control cycles. Compliance with DIN 862 gives a recognised reference for tolerances and acceptance criteria. Practical features for faster inspection workflows A large 38 mm dial improves legibility at the bench, while the mechanical design supports four‑way measurement (external, internal, depth and step) for versatile part inspection. The integrated locking screw secures the slide for transfer measurements and the thread table on the reverse offers a quick reference for common thread sizes during rapid checks. The analogue mechanism avoids battery dependence and keeps setup simple for repetitive measuring operations. Built for dependable workshop use and backed by Metav This caliper combines robust mechanical engineering with user‑oriented details so that routine measuring tasks stay consistent and fast. As part of Metav IndustryLine, the instrument benefits from a distribution and quality filter centred in Emmerich, supporting fleet procurement and reliable supply. Metav’s broad selection and long experience make this tool a practical choice for workshops that value traceable measurement, straightforward handling and sustained availability Contact Metav Werkzeuge for tailored advice on workshop adoption and procurement of the Metav IndustryLine Dial Caliper "TOP" — reach out at info@metav-werkzeuge.com or call +49 2822 7131930 for product guidance and order coordination Technical data Article number: M202.133 GTIN: 4054469102313 ECLASS: 21170344 Customs tariff number: 90173000 Norm: DIN 862 Facts Measuring range: 0–200 mm Reading / resolution: 0.02 mm Dial diameter: 38 mm Display: analog Four‑way measurement: yes Special features Locking screw Thread table on reverse Analogue dial mechanism SKU: M202.133 FAQ How accurate is the caliper for routine workshop measurements? The Dial Caliper "TOP" delivers a reading resolution of 0.02 mm and meets DIN 862 standards, providing the repeatability expected for standard workshop and machine‑shop quality checks. Which measurement types can be performed with this instrument? The unit supports four‑way measurement: external, internal, depth and step measurements are all possible with the same analogue caliper, enabling flexible inspection workflows. Is the instrument suitable for use in metalworking environments? Yes, the caliper’s 0–200 mm range and mechanical design make it well suited to metalworking and general machining tasks where a robust, easy‑to‑read instrument is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Dial Caliper Three-Point 0.02mm Resolution 4-Function Measurement, DIN 862, Plastic Case - Metav IndustryLine
Reliable workshop measurement combining a 200 mm measuring range, 0.02 mm reading accuracy and DIN 862 conformity for consistent routine checks. Order the dial caliper directly via Metav Werkzeuge or consult our specialists for application advice. Uhren‑Messschieber TOP 200 × 0.02 mm — Dial caliper with 200 mm range and 0.02 mm resolution (Metav IndustryLine) The Uhren‑Messschieber TOP 200 × 0.02 mm is a precision dial caliper engineered for standard workshop and quality‑control tasks, offering a clear analogue display and practical features for repeatable measurements. Precision dial caliper, 200 mm range 0.02 mm reading resolution Compliant with DIN 862 measuring standard Locking screw and rear thread table included Reliable precision for everyday workshop control The TOP dial caliper provides consistent accuracy with a reading step of 0.02 mm, placing it in the upper range of mechanical precision for analogue instruments. Designed to support standard production and inspection routines, the instrument’s compliance with DIN 862 gives a verifiable reference for measurement protocols and documentation. This results in fewer rework cycles and a measurable improvement in process reliability when used as a regular inspection tool. Clear visual feedback and secure handling for repeatable readings A clearly marked 38 mm dial and tactile slide design deliver fast, unambiguous readings that reduce interpretation errors during rapid checks. The integrated locking screw secures a measured value for transfer or marking, while the mechanical dial avoids battery dependency and simplifies maintenance. Together these features support faster throughput and reduce the risk of lost measurement data in busy workshop environments. Versatile four‑function measuring for multiple tasks Equipped for inside, outside, depth and step measurements, the caliper replaces several single‑purpose gauges in routine workflows. The four‑way capability streamlines tool sets and shortens setup time for changeovers. A thread table on the reverse adds practical reference data for threaded parts, helping to speed up decisions without reaching for additional documentation. Built to integrate with established workshop practices The analogue design combines robust mechanical construction with familiar operation, making it suitable for conventional machine shops and vocational training environments. Marked as a standard‑range caliper (up to 200 mm), it offers the best balance between reach and stiffness for everyday metalworking tasks. The instrument’s straightforward layout and DIN conformity facilitate inclusion in inspection routines and work instructions. Contact Metav Werkzeuge today for tailored advice on integrating the TOP dial caliper into existing inspection routines — our Emmerich team will support selection and practical application guidance Technical data Article number: M202.143 Brand: Metav IndustryLine GTIN: 4054469102375 eClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution / reading: 0.02 mm Dial diameter: 38 mm Reading system: Analog (dial) Standard: DIN 862 Special features Four measurement functions: inside, outside, depth, step Locking screw included Thread table on reverse side Analogue design for battery‑free operation FAQ What measurement functions are covered by this caliper? The device performs inside, outside, depth and step measurements; the TOP dial caliper (SKU M202.143) supports these four functions for versatile workshop use. How precise is the analogue display? The analogue dial reads in 0.02 mm increments, providing high mechanical resolution suitable for routine quality checks and production control. Is the caliper suitable for standard machine‑shop inspection routines? Yes. The caliper’s 200 mm range and DIN 862 conformity make it well suited to everyday inspection tasks in machine and metal workshops. Does the caliper include any features to help transfer or retain measurements? A locking screw secures the slide for transfer or marking, and a thread table on the reverse provides quick reference data for threaded components. Which brand and SKU identify this instrument for ordering and documentation? The instrument is supplied by Metav IndustryLine, identified as M202.143, and listed under GTIN 4054469102375 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Watch-Type Caliper 0.01mm Resolution, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Benefit from 0.01 mm reading accuracy and versatile fourfold measurement within the compact 0–200 mm range; the analogue dial with a 38 mm face and locking screw supports repeatable, workshop-ready readings. Order the Dial Caliper directly via Metav Werkzeuge or consult our specialists if further advice is required. Dial Caliper TOP 200 x 0.01 mm — Analogue dial gauge with 0–200 mm range The Dial Caliper TOP 200 x 0.01 mm is an analogue measuring instrument designed for standard workshop and metalworking tasks, offering precise outside, inside, depth and step measurements across a versatile 0–200 mm span. Analogue dial, 0.01 mm resolution Four measurement functions Compliant with DIN 862 Locking screw and thread table Precision for routine workshop control and fine mechanics This instrument is tailored to the Standard measuring class (0–200 mm), which balances reach and rigidity for everyday machining and quality control. The 0.01 mm dial resolution provides a clear, incremental scale that speeds up inspection cycles while keeping measurement uncertainty low for typical production tasks. Compliance with DIN 862 supplies an established reference for expected accuracy and construction, making the gauge a dependable choice for mechanical workshops and small-series production where consistent repeatability matters. Robust handling that reduces rework and measurement variability The dial face of 38 mm diameter improves legibility compared with smaller dials, and the integrated locking screw secures the slide for transfer measurements and repeat checks. The instrument incorporates a thread table on the reverse for rapid reference during screw and thread work. Together these features convert the mechanical movement into practical advantages: fewer read-back errors, faster repeat measurements, and reliable clamping for comparative checks on the shop floor. Versatile fourfold measurement and straightforward interpretation Equipped for fourfold measurement — outside, inside, depth and step — this analogue gauge covers the common tasks that a workshop or toolroom requires, reducing the need for multiple specialised tools. The mechanical dial provides intuitive feedback and immediate visual confirmation of small deviations, which is particularly useful during setup or when scanning for wear. The combination of mechanical simplicity and a precise scale supports long-term serviceability and ease of use in environments where digital options are not required or desired. Contact Metav Werkzeuge for a tailored supply recommendation for the Metav IndustryLine Dial Caliper TOP 200 x 0.01 mm and to arrange procurement through our Emmerich site Technical data Article number: M202.144 GTIN: 4054469102382 ECLASS: 21170344 Category: Messschieber Facts Measuring range: 0–200 mm Resolution: 0.01 mm Dial diameter: 38 mm Norm: DIN 862 Analog reading Special features Four measurement functions (outside, inside, depth, step) Locking screw Thread table on reverse Feststellschraube present Gewindetabelle on back FAQ What is the measuring range of this caliper? This Dial Caliper TOP 200 x 0.01 mm offers a measuring range of 0–200 mm (SKU M202.144) suitable for standard workshop tasks. What resolution and readability does the instrument provide? The instrument provides a resolution of 0.01 mm via an analogue dial with a 38 mm face for clear visual readout. Which measurement types can be performed with this gauge? The gauge supports fourfold measurement: outside, inside, depth and step measurements, enabling versatile inspection routines. Does this caliper meet any industry standards? Yes; the caliper is manufactured in accordance with DIN 862, ensuring recognised construction and performance criteria for mechanical calipers. Is this instrument intended for workshop or precision-laboratory work? Classified in the Standard range (0–200 mm), the caliper suits general machine‑shop, toolroom and quality-control applications where a balance of reach and rigidity is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Caliper Jaw Adapter For 4mm Max Jaw Thickness, Attachment For Caliper Measuring Tips - Metav IndustryLine
Take advantage of the combination of compatibility with standard calipers (0–300 mm), a maximum jaw thickness allowance of 4 mm, and a lightweight, easy-to-fit design to keep measurement tasks efficient and repeatable on the shop floor. Order the accessory directly via Metav Werkzeuge or consult the team for application advice. Measuring Adapter for Calipers M240.311 — fits 0–300 mm calipers, 4 mm max jaw thickness (Metav IndustryLine) Measuring Adapter for Calipers M240.311 is an attachment that extends the functionality of standard calipers, enabling secure use where jaw thickness or geometry would otherwise limit access Compatible with 0–300 mm calipers Accepts up to 4 mm jaw thickness Lightweight accessory — 0.05 kg Simple attachment for measuring jaws Extend caliper capability while preserving measurement quality The adapter transforms a standard caliper into a more versatile gauging tool without altering the instrument’s core accuracy. Designed for the Standard (0–300 mm) caliper class, the accessory accepts jaws up to 4 mm thick and is intended for direct, repeatable mounting on common analogue calipers. As a result, workshops gain access to otherwise awkward measuring points without the need for specialised instruments, improving throughput and reducing setup time. The compact mass of 0.05 kg minimises added inertia, so handling remains nimble and stable during routine inspection work. Quick fit and reliable handling for everyday workflows Installation emphasises speed and repeatability: the attachment clamps to the caliper measuring jaws and stays secure during typical measuring sequences. Being an analogue accessory it integrates seamlessly with mechanical verniers and digital calipers of compatible jaw thickness, preserving the original measuring functions and ergonomics. The straightforward design reduces training time for operators and supports faster measurement cycles, delivering a clear efficiency gain in production and quality control tasks. The robust fitting prevents slippage, enhancing confidence in measured values under normal workshop conditions. Practical choice for workshops and metrology suppliers As a small but effective accessory from Metav IndustryLine, the M240.311 suits both craft and light industrial environments where adaptability matters. It bridges the gap between specialist gauges and everyday calipers, enabling teams to meet measurement challenges without overcomplicating tool inventories. The accessory complements existing metrology equipment by expanding application range while keeping procurement and storage simple — an economical way to increase capability at the bench or in a service van. For straightforward integration into inspection routines or for advice on compatibility with a specific caliper model, contact Metav Werkzeuge to request the M240.311 measuring adapter or to discuss application specifics — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M240.311 GTIN: 4054469159508 Manufacturer: Metav IndustryLine Core data Suitable for calipers: 0–300 mm Max jaw thickness: 4 mm Weight: 0.05 kg Customs tariff number: 90178090 Special features Attachment for caliper measuring jaws Compatible with common standard calipers Class: Standard (0–300 mm) Analogue accessory FAQ Can this adapter be used on any caliper model? The adapter is compatible with calipers that have a measuring range up to 0–300 mm and jaws no thicker than 4 mm; check jaw geometry against the M240.311 dimensions for secure fit. Will the adapter affect the caliper’s accuracy? The accessory does not change the caliper’s internal measuring mechanism; measurement accuracy remains governed by the caliper itself, while the adapter provides improved access and handling for specific workpieces. Is the material specified for the adapter? The product specification does not list a base material; refer to the technical data or contact Metav Werkzeuge for detailed construction information if material composition is required for a particular application. What types of measurements can be carried out with the adapter fitted? All standard caliper functions remain available; the adapter facilitates improved engagement of the jaws for external or step measurements where jaw thickness or shape would otherwise obstruct access. Is this accessory suitable for regular workshop use? Yes — the adapter is designed for routine use in workshops and small production environments where extending caliper capability is preferable to introducing additional specialised gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.01mm Resolution Four-Point Measurement Plastic Case DIN 862 - Metav IndustryLine
Take advantage of the combination of precise 0.01 mm reading, a clear 45 mm dial and four measurement modes for consistent workshop quality control; ordering is possible directly via Metav Werkzeuge or by consulting the technical advisors for specification alignment. Dial Caliper "TOP" M202.136 — 300 mm range, 0.01 mm dial reading (analog) The Dial Caliper "TOP" is an analogue measuring instrument designed for workshop and precision‑engineering use, offering clear mechanical readout and robust features for general machine and metalworking inspection. Analog dial, 0.01 mm resolution 45 mm easy‑read dial Four measuring functions (in/out/depth/step) Locking screw, thread pitch table on reverse Precision and compliance for everyday workshop control The dial instrument delivers a 0.01 mm reading resolution combined with mechanical robustness that suits routine quality checks and setup tasks. Compliance with DIN 862 ensures the measuring chain follows recognised workshop standards, which simplifies traceability and documentation in production environments. The 45 mm dial provides an enlarged, easy‑to‑read display that reduces interpretation errors during repeated inspections; the analogue principle avoids battery dependency while offering immediate, tactile feedback. Together these characteristics make the tool appropriate for assembly benches, maintenance departments and light quality‑control stations where reproducible results matter. Designed for reliable handling and repeatable results With a measuring range classed as Standard (100–300 mm), the instrument balances reach and stiffness to measure common components such as shafts, housings and mounting fixtures with stable guidance. The inclusion of a locking screw secures the slider for transfer measurements or template marking, while a thread pitch table on the reverse speeds up fast checks on threaded parts without the need for separate references. Mechanical construction and slide guidance prioritise repeatability, so each measurement cycle returns comparable values — a key factor when the measuring routine is repeatedly performed on production lines or in quality audits. Practical features that speed up inspection tasks The caliper supports four measuring functions — external, internal, depth and step — enabling multiple routine tasks with one instrument and reducing tool changes during inspection sequences. The clear analogue dial readout helps technicians maintain focus on the component rather than on menus or electronics, increasing throughput in simple inspection workflows. Lightweight and compact handling characteristics favour single‑hand operation at the bench; combined with the instrument’s straightforward design, this reduces training time for new operators and simplifies incorporation into existing measuring sets for workshops and service departments. Contact Metav Werkzeuge for advice on specifying the Dial Caliper "TOP" (M202.136) and arrange delivery from our Emmerich quality centre Technical data Article number: M202.136 GTIN: 4054469102344 Brand: Metav IndustryLine Norm: DIN 862 Core technical data Measuring range: 0–300 mm Resolution: 0.01 mm Dial diameter: 45 mm Measuring functions: 4 (external/internal/depth/step) Special features Analog dial readout Locking screw for secure measurements Thread pitch table on reverse face Classification: Standard (100–300 mm) Mechanical construction, no battery required FAQ Is the Dial Caliper "TOP" suitable for workshop quality control? The Dial Caliper "TOP" (M202.136) is intended for workshop and light quality‑control tasks thanks to its 0–300 mm range and 0.01 mm readout. Which measurement types can be performed with this caliper? The instrument supports external, internal, depth and step measurements, enabling four distinct inspection tasks without tool changes. Does the caliper comply with recognised standards? Yes, the device is manufactured to meet DIN 862, which defines general requirements for calipers used in industrial environments. Is an electronic data interface available for the instrument? This is an analogue dial instrument; no electronic data output is provided for the Dial Caliper "TOP". What practical aids are included for thread checking? A thread pitch table is printed on the reverse face to facilitate quick identification and basic verification of thread pitches during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.01mm Resolution, Four-Function, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a workshop‑grade dial caliper that combines fine resolution and practical handling: the large 45 mm dial and 0.01 mm graduation ensure precise readings, while the four measurement functions support a wide range of tasks; order or discuss the caliper with Metav Werkzeuge for a reliable delivery and application advice. Dial Caliper M202.036 — 0–300 mm, 0.01 mm dial, Metav IndustryLine A robust dial caliper M202.036 designed for general workshop and quality‑control use with a clear mechanical dial and DIN 862 conformity. Dial reading with 0.01 mm resolution Measuring range 0–300 mm standard workshop size Four functions: inside, outside, depth, step Reverse‑side thread pitch chart included Precision that speeds up workshop inspection The mechanical dial and finely graduated scale deliver repeatable measurements across the standard 0–300 mm range, classified as the standard category for general machinery and metalwork. With a 45 mm dial, readings are quick to interpret and the 0.01 mm graduation gives a level of detail that goes beyond coarse vernier tools, supporting tighter tolerances without complex electronics. This precision translates into fewer reworks and faster QA cycles, a clear rational advantage for production and maintenance environments where measured parts must fall consistently within specification. Four measurement modes for versatile tasks Equipped to perform outside, inside, depth and step measurements, the tool replaces multiple single‑purpose gauges and streamlines the inspection process. The long and short jaw geometry (60/25 mm) accommodates a variety of component sizes while keeping handling nimble at the bench. The built‑in thread pitch chart on the reverse side speeds up everyday checks on threaded components, reducing time spent consulting separate references and thereby improving workflow efficiency. Simple mechanics, dependable handling As an analog instrument constructed to DIN 862, the caliper emphasises mechanical robustness and intuitive operation. The dial drive avoids battery dependence and the tactile feel supports consistent application of measuring pressure, improving measurement constancy in routine use. For teams preferring straightforward tools that are easy to teach and maintain, this caliper offers an approachable balance of durability and measuring fidelity that supports both skilled machinists and workshop trainees. Practical delivery and traceable details The caliper comes supplied in a protective transport case and includes practical workshop aids such as the reverse‑side thread table; this ensures safe storage in transit and convenient reference on the shop floor. Conformity with DIN 862 is stated on the instrument, aligning it with common inspection standards. The compact mechanical design minimises downtime related to battery changes, while the dial diameter and jaw geometry make the instrument comfortable to read and manoeuvre during repetitive inspection tasks. Contact Metav Werkzeuge to discuss how the Metav IndustryLine dial caliper M202.036 fits your quality routine and to arrange supply directly from our Emmerich facility Technical data Article number: M202.036 GTIN: 4054469102252 Brand: Metav IndustryLine Category: Caliper / Dial caliper Conformity: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Dial diameter: 45 mm Jaw lengths: 60 mm / 25 mm Customs tariff number: 90173000 Special features Dial (mechanical) reading mechanism Four measurement functions: outside, inside, depth, step Thread pitch chart on reverse side Supplied in protective case for transport Analog instrument, no battery required FAQ What measuring range does this caliper cover? The Metav IndustryLine dial caliper M202.036 covers a measuring range of 0–300 mm, making it a standard‑range workshop instrument suitable for everyday machining and inspection tasks. How fine are the readings on the dial? Readings on this dial caliper are to 0.01 mm resolution; the 45 mm dial offers clear visibility for precise interpretation during routine measurements. Which measurement types can be performed with this caliper? The instrument supports four measurement types: outside, inside, depth and step measurements, so it replaces several single‑purpose gauges in common shop workflows. Is a case provided and what is it for? Yes, the caliper is supplied in a protective transport case to safeguard the instrument during transit and short‑term storage in the workshop. Does the caliper conform to inspection standards? The caliper is made to DIN 862, indicating compatibility with established mechanical caliper standards for workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.02mm Resolution Four-Function, Plastic Case, DIN 862 - Metav IndustryLine
Take advantage of a precise 0.02 mm graduation, a clear 45 mm dial and full four‑function measuring capability to streamline routine inspection tasks; order the caliper directly via Metav Werkzeuge or consult our advisors for application support. M202.032 Dial Caliper — 300 mm range, 0.02 mm resolution (Metav IndustryLine) The M202.032 dial caliper is a robust analogue measuring instrument designed for general workshop and precision mechanical use, offering a 300 mm measuring range and fine 0.02 mm graduation for repeatable dimension checks Precision 0.02 mm graduation 45 mm diameter dial for clear readings Four-function measuring capability Conforms to DIN 862 standard Precision where it matters for workshop quality control The instrument delivers a 0.02 mm graduation across a 300 mm span, which places it firmly in the standard caliper category for machine and metalworking shops. The fine scale enables reliable checks of small features while the long range covers the most common workshop tasks, so inspection routines become more efficient. Because the design follows DIN 862, the measuring results are compatible with common quality-control expectations and easily comparable across suppliers and inspection reports. Clear readings and versatile measurement modes A prominent 45 mm dial provides rapid visual confirmation of measurements, complementing the vernier layout for analogue precision. The device supports four‑function measuring: external, internal, depth and step measurements, reducing the need for multiple tools during a single inspection. The combination of dial readability and multi‑mode capability shortens measuring cycles and lowers the risk of handling errors during repeated checks. Built for everyday use and safe transport The caliper is produced as an analogue instrument with practical features such as a thread table on the reverse face for quick reference. It is supplied with a protective case for secure transport and storage, protecting the scale and dial from shocks and contamination between jobs. The balanced design keeps handling straightforward during single‑handed measuring tasks while maintaining the stiffness needed for repeatable results on typical workshop components. For traceable, workshop-grade measurement equipment, request a quote for the Metav IndustryLine M202.032 dial caliper from Metav Werkzeuge in Emmerich or contact our experts for application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M202.032 GTIN: 4054469102207 Category: Calipers (analogue dial caliper) Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution / graduation: 0.02 mm Dial diameter: 45 mm Reading (dial): 0.2 Special features Analogue (dial + vernier) Conforms to DIN 862 Four‑function measuring: external, internal, depth, step Thread table printed on reverse side for reference Supplied with protective transport case FAQ What measuring tasks is this caliper best suited for? The M202.032 dial caliper is intended for general workshop use and precision mechanical checks where a 300 mm range and 0.02 mm graduation cover typical component dimensions. Does the instrument support internal and depth measurements? Yes — the caliper provides four‑function measuring (external, internal, depth and step), enabling versatile inspection without changing tools. Is the reading standard traceable to industry norms? The caliper is manufactured to meet DIN 862, making its readings suitable for standard workshop quality control and comparable across suppliers. How is the caliper protected during transport and storage? The M202.032 is supplied in a protective case to safeguard the scale and dial against impact and contamination between jobs. Can the dial be read quickly under workshop lighting? The 45 mm diameter dial offers a clear, easy‑to‑read display that speeds up repetitive measurements and reduces operator fatigue. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, error‑free analogue readings for production
Dial calipers (also referred to as dial indicator calipers or analogue dial calipers) deliver rapid and unambiguous millimetre fractions via an integrated dial, making them ideal for repetitive inspection tasks in industrial workshops and quality control labs. By presenting the fractional reading directly on the dial, these tools drastically reduce manual interpretation errors and accelerate throughput on the shop floor.
How the mechanism ensures consistent accuracy
The measuring action is transmitted by a high‑precision rack-and-pinion system, which converts linear movement into exact pointer rotation without play. A shock‑protected mechanism and hardened stainless steel construction ensure long‑term form stability and corrosion resistance under daily workshop conditions. A lockable bezel allows easy zero setting, while a locking screw secures results for transfer or documentation.
Practical benefits on the shop floor
- Faster inspection cycles thanks to the integrated dial that removes the need for manual fractional calculation.
- Improved repeatability and lower scrap rates by eliminating common reading errors.
- Robust performance in harsh environments through hardened stainless steel and impact protection.
- Simple calibration and zeroing via the lockable bezel, reducing setup and ramp‑up time.
- Available in various measuring ranges to match standard workshop and production requirements.
Metav — a precision partner you can rely on
Metav stands for democratisation of precision, combining decades of technical expertise with a broad, dependable supply chain from Emmerich. With over 48,000 customers and a catalogue that spans more than 250,000 products, Metav supplies dial calipers and complementary measuring equipment as a pragmatic, quality‑focused partner for industry and trade.
In short: dial calipers for reliable inspections
Dial calipers provide a straightforward, mechanically robust solution for fast, repeatable analogue measurement on the production line, supporting consistent quality control and reduced measurement uncertainty.
FAQ
What makes dial calipers more error‑resistant than standard vernier calipers?
Dial calipers show the millimetre fraction on an integrated dial, so there is no need for manual interpolation of the scale; this direct readout reduces human reading errors and speeds up successive measurements.
Can dial calipers withstand daily workshop use?
Yes. Dial calipers are designed with a shock‑protected mechanism and hardened stainless steel construction to maintain accuracy and resist wear in routine industrial environments.
How is zeroing and result locking handled on these calipers?
Zeroing is performed using the lockable bezel, and measured values can be fixed with the locking screw, ensuring secure transfer of results and repeatable checks.
Are dial calipers available for different measurement tasks?
Dial calipers are offered in various measuring ranges to suit bench, toolroom and production inspection tasks, providing flexibility across multiple workflows.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com