Ausstattungen für Fräsmaschinen

Combine reliable 1300 kgf clamping power with a 360° rotating base for flexible, efficient bench work; the compact, 6 kg design supports space-saving layouts. Order the vice directly via Metav Werkzeuge or consult our advisors for specification support. BVV-3 Workshop vice by Vertex — 360° rotating base, 1300 kgf clamping The BVV-3 is a sturdy workshop vice with a 360° rotating base, designed for versatile clamping tasks in metalworking and general workshop use 1300 kgf clamping force 0–75 mm jaw opening 360° rotating base for positioning Compact 178 x 280 x 138 mm footprint Secure, powerful clamping for reliable machining The vice delivers a high 1300 kgf clamping force across a 0–75 mm jaw opening, offering consistent grip for a wide range of bench operations. This level of force reduces slippage and minimises rework, which supports a more efficient workflow in production and repair environments. The mechanism is geared for straightforward operation, converting handwheel rotations into predictable clamping pressure for repeatable setups. Full rotational freedom for precise setups Equipped with a 360° rotating base, the unit enables fast repositioning without remounting the workpiece, saving set‑up time during multi-angle tasks. The rotatable foot locks securely at the chosen angle to maintain alignment during machining, sanding or filing. This mobility benefits assembly and maintenance work where access from different sides is required and shortens cycle times through reduced handling. Compact design that fits busy benches With a compact footprint of 178 x 280 x 138 mm and a net weight of 6 kg, the vice occupies minimal bench space while providing robust functionality. The relatively light mass allows repositioning on the workbench when workflow changes, yet the base and locking system keep the tool stable during operation. Its size is suitable for smaller workshops and technical service benches where space optimisation is essential. Reliable performance and straightforward upkeep The construction focuses on durability and uncomplicated maintenance, supporting continuous shop use with minimal downtime. The simple mechanical design translates to fewer maintenance steps and predictable longevity, which in turn reduces total operating costs and supports steady production output. For procurement decisions, the combination of dependable clamping and easy handling contributes directly to operational efficiency. Discuss the Vertex BVV-3 with Metav Werkzeuge in Emmerich for tailored advice and reliable European supply Technical data Article number: BVV-3 GTIN: 4061905083389 eClass: 21020601 ETIM: EC002173 Facts Dimensions: 178 x 280 x 138 mm Weight: 6 kg Clamping force: 1300 kgf Jaw opening: 0–75 mm Special features 360° rotating base for flexible positioning Workshop vice design for bench mounting Manufacturer: Vertex FAQ What is the maximum jaw opening of the vice? The jaw opening is 0–75 mm, suitable for small to medium-sized components. How much clamping force does the vice provide? The vice provides a clamping force of 1300 kgf, offering secure holding for common workshop tasks. What are the vice's dimensions and weight? Dimensions are 178 x 280 x 138 mm and the net weight is 6 kg, giving a compact but stable footprint. Does the vice allow rotation for angled work? Yes, the unit has a 360° rotating base, allowing quick repositioning and secure locking at the required angle. Who manufactures this workshop vice? This workshop vice is manufactured by Vertex and is supplied under the designation BVV-3 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of reliable, repeatable clamping and proven workshop durability: the combination of 900 kgf clamping force, a 0–65 mm jaw opening and 0.01 mm alignment accuracy supports consistent milling results and efficient setups. Order the VBV-4 Milling Vice directly via Metav Werkzeuge or consult the team for application advice. VBV-4 Milling Vice (B-type) by Vertex — 0–65 mm opening, 900 kgf clamping force A VBV-4 milling vice engineered for secure workholding in precision milling and general workshop clamping. Robust mechanical B-type design Clamping range 0–65 mm High clamping force 900 kgf Precision alignment accuracy 0.01 mm Consistent gripping for repeatable machining results A dependable vice transforms machining into a predictable process. The robust clamping force of 900 kgf together with the 0–65 mm jaw travel ensures workpieces are held firmly throughout feed and spindle loads, reducing micro-movements that cause dimensional error. For workshop managers and production engineers this means fewer reworks and a tighter tolerance band on finished parts. The mechanical design prioritises repeatability, making it suitable for short-run production and frequent set-ups. Precise alignment and reduced set-up time High-precision tasks benefit from an alignment capability of 0.01 mm, which minimises orientation error when indexing or aligning components for multi-axis milling. The vice’s mass of 13 kg contributes to static stability, dampening vibration and improving surface finish without complex fixturing. In practice, accurate alignment reduces inspection time and downstream correction work, supporting faster throughput and predictable quality in everyday machining operations. Compact footprint with straightforward workshop integration With overall dimensions of 212 x 305 x 107 mm the vice fits readily on standard milling tables while leaving room for additional clamps or fixtures. The mechanical B-type format simplifies operation and maintenance compared with powered variants, offering a familiar interface for machinists and toolroom staff. Installation is uncomplicated: the compact form factor allows close placement to other tooling, improving ergonomics during repeated set-ups and facilitating efficient use of table space. Durable construction and supply confidence for production environments Built for continuous use, the vice’s mechanical simplicity reduces potential failure points and accelerates maintenance tasks, which lowers downtime and life-cycle costs. Sourcing via a specialist distributor provides an added layer of assurance: Metav acts as a quality filter for the European market, combining decades of expertise, a broad product range and dependable logistics from Emmerich. That service reliability supports shops seeking consistent supplies for extended production cycles. Contact Metav Werkzeuge in Emmerich for tailored advice and fast, reliable supply — email info@metav-werkzeuge.com or phone +49 2822 7131930 for specification support and order coordination Technical data SKU: VBV-4 GTIN: 4061905084416 Manufacturer: Vertex Type: Mechanical Facts Opening: 0–65 mm Clamping force: 900 kgf Accuracy: 0.01 mm Weight: 13 kg Dimensions: 212 x 305 x 107 mm Special features B-type milling vice Mechanical operation eClass: 21020601 ETIM: EC002173 FAQ What clamping range does the vice provide? The VBV-4 milling vice provides a clamping range of 0–65 mm and delivers a clamping force of 900 kgf for secure workholding. Is the vice suitable for precision milling tasks? Yes. With an alignment accuracy of 0.01 mm the vice supports precision milling and repeatable positioning for demanding components. Will the vice fit on standard milling tables? The vice measures 212 x 305 x 107 mm; its compact footprint and mechanical B-type design make it compatible with most standard milling table arrangements. How heavy is the vice and what does that mean for stability? At 13 kg the vice provides substantial mass for improved damping and stability during cutting, supporting better surface finish and reduced chatter. Which classifications and standards apply to this product? The unit is listed under eClass 21020601 and ETIM EC002173, indicating its product grouping and technical classification in industrial catalogues. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of fast clamping, a wide 0–100 mm jaw range and a stable 13.3 kg mass for reliable, repeatable workshop clamping; order directly via Metav Werkzeuge or ask our consultants for application advice. VQS-40 Quick‑Release Bench Vice — 0–100 mm jaw opening, robust stability (Vertex) The VQS-40 is a quick‑release bench vice designed for general workshop clamping and machining tasks, offering fast set‑ups and steady holding for repeatable results. Quick‑release clamping for fast setup 0–100 mm jaw opening for varied parts 13.3 kg mass for vibration dampening Compact footprint: 167×428×196 mm Reduce setup time with rapid clamping The quick‑release mechanism shortens clamping cycles, enabling faster fixture changes and improved throughput on repetitive jobs. With a 0–100 mm jaw range, the vice accommodates a broad mix of stock sizes without auxiliary jaws, helping to streamline workflow. The design focuses on practical speed: fewer adjustments mean less machine downtime and a higher rate of finished parts per shift. Hold parts securely for accurate machining A stable mass of 13.3 kg gives the vice a solid foundation, reducing micro‑movement and supporting consistent cutting results. This stability translates into better precision and improved finish quality when milling or drilling. The vice’s jaw geometry ensures reliable contact and repeatability, which is important when the same datum must be held across multiple operations. Compact design that fits busy benches The compact footprint (167×428×196 mm) saves valuable bench space while still providing effective clamping range. The vice is sized for busy workshops where layout flexibility matters; the combination of small external dimensions and a useful jaw span allows for versatile placement without sacrificing performance. This balance keeps the workbench organised and accessible while maintaining the functionality expected from a professional clamping tool. Practical technical clarity for workshop planning Key specifications are provided plainly so purchasing and production planning can proceed with confidence. The vice’s measurable properties — jaw opening, mass and overall dimensions — support decisions about fixturing, storage and compatibility with existing equipment. This transparency helps avoid guesswork and supports reliable integration into tooling setups. For tailored advice about the Vertex VQS-40 and to request technical drawings or compatibility information, contact Metav Werkzeuge in Emmerich — our specialists will assist with specifications and practical application guidance Technical data Article number: VQS-40 GTIN: 4061905083679 eClass: 21020601 ETIM: EC002173 Facts Weight: 13.3 kg Jaw opening: 0–100 mm Dimensions: 167×428×196 mm Special features Quick‑release clamping mechanism Compact bench vice design Brand: Vertex SKU: VQS-40 FAQ What is the jaw opening of the vice? The jaw opening is 0–100 mm, which allows clamping of a wide range of part sizes with few adjustments for most workshop tasks. How much does the vice weigh? The vice has a mass of 13.3 kg, providing intrinsic stability that helps to reduce vibration during machining. Are the dimensions suitable for small workbenches? Yes, the vice’s compact footprint of 167×428×196 mm makes it suitable for benches where space is limited yet robust clamping is required. Is the VQS-40 appropriate for precision drilling and milling? The VQS-40 is engineered for reliable clamping and precision, with its quick‑release system and stable mass supporting consistent machining outcomes. Who manufactures the VQS-40? The VQS-40 is produced by Vertex and supplied under the SKU VQS-40, ensuring a recognised origin and traceable specification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the adjustable height and compact footprint to secure workpieces reliably in confined setups; the option of a U-shaped or rotating configuration adds flexibility for different clamping tasks. Order the clamp directly via Metav Werkzeuge or consult the team for application advice. Vertex VCA-404 Clamp — adjustable height 0–80 mm, U-shape or rotatable The Vertex VCA-404 is a compact workshop clamp designed for precise fixturing and repeatable set-ups, featuring an adjustable height range and a robust M12 fixing bolt for secure attachment. Adjustable height 0–80 mm Choice of U-shape or rotatable design Compact dimensions 105 x 45 x 35 mm Consistent clamping for repeatable production The VCA-404 delivers repeatable clamping through its fine height adjustment, enabling consistent part positioning across multiple cycles. The adjustable height (0–80 mm) reduces rework by allowing accurate setting of the clamping plane, while the integrated M12 fixing bolt ensures a secure connection to fixtures or plates. For production environments, these attributes translate into faster set-up times and fewer indexing errors, supporting an efficient workflow and predictable results. Saves space without compromising stability With overall dimensions of 105 x 45 x 35 mm, this clamp is engineered for tight workstations and compact jigs. The compact form factor makes it suitable where space is limited but reliable force transmission is required. Despite the small footprint, the design provides a stable contact area that minimises movement during machining or assembly. This balance of size and stability supports cleaner bench organisation and easier integration into modular fixture systems. Flexible configuration for diverse applications Available in a U-shaped version or a rotating variant, the fixture adapts to different component geometries and clamping strategies. The option to select a rotational function simplifies access to awkward angles without repositioning the base, while the U-shape offers straightforward lateral clamping for profiles and edges. At a mass of approximately 1.5 kg, the unit combines manageable handling with the solidity expected in shop use, making it an adaptable choice for general workshop and light production fixturing. Contact Metav Werkzeuge for delivery and technical guidance on integrating the Vertex VCA-404 into existing fixtures; expert advice and stock info are available from Metav Werkzeuge at the Emmerich centre. Technical data SKU: VCA-404 GTIN: 4061905084294 Manufacturer: Vertex Facts Dimensions: 105 x 45 x 35 mm Adjustable height: 0–80 mm Weight: 1.5 kg Special features Variant: U-shape or rotatable design Fixing: M12 bolt Compact footprint for confined workspaces FAQ Is the clamp suitable for serial production setups? The VCA-404 is designed for repeatable clamping in serial production, where its adjustable height and secure M12 fixing support consistent part positioning. Can the clamp be mounted to standard fixture plates? Yes, the clamp accepts an M12 fixing bolt for secure attachment to common fixture plates and modular tooling systems. What are the configuration options and when to choose each? The U-shaped variant is suited to lateral clamping of profiles and edges, while the rotatable version allows angular access without relocating the base, both provided under the Vertex VCA-404 SKU. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of pneumatic actuation, 3200 kgf clamping force and 0.01 mm repeatability for reliable, high-throughput machining; order the unit directly via Metav Werkzeuge or contact our consultants for application advice. Vertex Pneumatic Precision Machine Vice VMC-4P — 0–100 mm opening, 3200 kgf clamping force Vertex Pneumatic Precision Machine Vice VMC-4P is a pneumatic clamping solution for machining centres and milling machines, designed to deliver repeatable high clamping force and fine positional accuracy in production environments Pneumatic actuation for fast, repeatable clamping 3200 kgf maximum clamping force Precision tolerance to 0.01 mm 0–100 mm adjustable jaw opening Faster set-ups and consistent accuracy for serial machining Pneumatic actuation reduces cycle time and improves part-to-part consistency; the pneumatic system gives rapid closing and opening with controlled motion, while the engineered gripping mechanism supports repeatability at 0.01 mm. This combination is aimed at shops that require predictable results across batches, reducing the need for continual re‑adjustment and lowering the risk of scrap. Where fixture changeover speed and dimensional integrity both matter, the vice supports leaner process flows and shorter set‑up windows. Secure clamping that withstands heavy machining forces High clamping force is critical when cutting forces are elevated; the vice provides up to 3200 kgf to maintain a firm hold during aggressive milling or slotting. A cast iron body contributes to structural rigidity and dampens vibration, helping to protect cutting tools and improve surface finish. The robust construction also supports stable reference points for multi‑axis work and reduces micro‑movement under load, which in turn helps deliver repeatable machining tolerances. Versatile grip range for varied components The adjustable jaw opening from 0–100 mm allows the vice to accommodate a wide span of workpiece sizes without the need for additional fixturing in many typical applications. At a mass of 27 kg the unit offers a low centre of gravity and good stability on the machine table, reducing the chance of displacement under load. The compact external dimensions make the vice suitable for both medium and smaller machining centres where space is at a premium, yet consistent clamping is still required. Built for integration and dependable supply Designed for workshop integration, the vice is a pneumatic solution that connects into standard plant compressed air systems and is compatible with automated clamping cycles. Manufactured by Vertex, the construction emphasises long service life and straightforward maintenance routines typical for industrial clamping technology. Sourcing through Metav Werkzeuge brings the advantage of a European quality filter and reliable logistics, helping to ensure continuity of supply for production environments. For secure, high‑repeatability workholding choose the Vertex VMC-4P — contact Metav Werkzeuge in Emmerich for tailored technical advice and prompt delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VMC-4P GTIN: 4061905083792 Manufacturer: Vertex Core specifications Opening: 0–100 mm Clamping force: 3200 kgf Accuracy: 0.01 mm Weight: 27 kg Materials & features Material: Cast iron Type: Pneumatic eClass: 21020601 ETIM: EC002173 FAQ What level of positional accuracy can be expected from this vice? The vice is specified with an accuracy of 0.01 mm, allowing for tight repeatability in positioning and secure workholding during machining. What clamping force does the unit provide? The VMC-4P delivers up to 3200 kgf clamping force, suitable for demanding milling and finishing operations where high holding power is required. What are the overall dimensions and mass of the vice? Overall dimensions are 100 x 450 x 148 mm and the vice weighs 27 kg, offering a compact footprint with good stability on the machine table. Is the vice suitable for automated machining centres? Yes — the pneumatic actuation is designed for integration with compressed air systems and automated clamping sequences in production environments. What is the construction material and how does it affect performance? The body is made from cast iron, which provides stiffness and vibration damping to support machining stability and surface finish quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of modular design, 900 kgf clamping force and 0.01 mm accuracy for reliable, repeatable clamping in precision machining. Order the vice directly via Metav Werkzeuge or consult our specialists for configuration advice. VMP-4 Precision machine vice — modular, optionally hydraulic, high clamping force A VMP-4 precision machine vice engineered for demanding workshop and CNC applications, offering modular setup with an optional hydraulic actuation for faster cycle times and secure workholding. Accuracy 0.01 mm repeatability Modular design, optionally hydraulic 900 kgf clamping force Alloy steel construction, robust Consistent accuracy for demanding components The vice delivers consistent accuracy through a finely engineered clamping system that secures parts with 900 kgf of clamping force while maintaining 0.01 mm repeatability. This level of precision reduces rework and ensures stable tool paths during milling and finishing operations. The mechanical guidance and hardened contact surfaces minimise deflection under load, translating component tolerances directly into higher first-pass yields. By specifying a vice with such measured repeatability, production planning benefits from fewer inspection cycles and predictable part quality. Modular configuration that adapts to workflows A modular construction allows the vice to be configured as a purely mechanical unit or upgraded with a hydraulic module where continuous or rapid clamping is required. This flexibility shortens set-up times and supports mixed-production environments: one fixture can serve manual benches, machining centres or transfer systems depending on the fitted modules. Integration is straightforward because the unit is designed for standard fixing patterns and simple retrofitting, enabling a single clamping solution to address a wider range of workpieces and batch sizes. Durable materials and low-maintenance operation for uptime Constructed from alloy steel with surface treatments to withstand workshop conditions, the vice offers a balance of robust construction and manageable weight (approx. 9.2 kg) for easy handling during tool changes. The design minimises service points; routine maintenance consists of lubrication and inspection of wearing parts, keeping downtime low and total cost of ownership competitive. Delivered with clear dimensional data and repeatable mounting options, the vice supports predictable fixture design and long-term reliability in serial machining. Contact Metav Werkzeuge to specify the modular clamping configuration of the Vertex VMP-4 and arrange delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMP-4 GTIN: 4061905084188 ECLASS: 21020601 ETIM: EC002173 Dimensions: 75x270x65 mm Weight: 9.2 kg Material: Alloy steel Clamping force: 900 kgf Opening range: 0–100 mm Accuracy: 0.01 Type: Mechanical Brand: Vertex Facts Accuracy: 0.01 mm Clamping force: 900 kgf Opening: 0–100 mm Weight: 9.2 kg Dimensions: 75 x 270 x 65 mm Special features Modular design, optionally hydraulic Alloy steel construction Mechanical operation, compatible with retrofittable hydraulic module SKU: VMP-4 FAQ What level of accuracy can be expected from the VMP-4? The VMP-4 precision machine vice is specified with an accuracy of 0.01 mm, providing the repeatability required for tight-tolerance machining tasks. Can the vice be upgraded to hydraulic actuation? Yes, the vice features a modular design that can be supplied or retrofitted with a hydraulic module to provide faster and more uniform clamping. What materials is the vice suitable for clamping? The VMP-4 vice, built from alloy steel, is intended for secure clamping of metal workpieces commonly used in machining, supporting stable results during milling and finishing. How much clamping force does the vice provide? The unit delivers up to 900 kgf of clamping force, combining strong holding power with the precision needed for accurate machining operations. Is the VMP-4 suitable for use in CNC machining centres? Yes, the vice is designed for workshop and CNC applications and can be adapted to machining centres via standard mounting patterns or the optional hydraulic upgrade. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust clamping power, precise repeatability and a tilting function that reduces re‑fixturing time. Order the milling vice directly via Metav Werkzeuge or ask our consultants if additional specifications are required. VWT-4B tilting milling vice with 0–220 mm opening (Vertex) The VWT-4B is a tilting milling vice designed for secure, accurate clamping of workpieces in milling and machining applications, enabling angled set‑ups and repeatable positioning. Cast iron construction for high stability Tilting function for angled clamping 0–220 mm opening for versatile part sizes 1200 kgf clamping force for secure hold Stable, repeatable clamping for precise machining The vice’s cast iron body provides a stable foundation that reduces vibration and improves surface finish during machining. With a rated clamping force of 1200 kgf and an indicated accuracy of 0.01 mm, the unit supports tasks that demand consistent tolerances and repeatability. This combination minimises rework and downtime by maintaining part position under cutting loads, translating directly into higher first‑pass yield and predictable throughput. Angle versatility that speeds complex set‑ups The integrated tilting vice function allows secure angled clamping without complex fixtures, reducing the number of set‑ups required for multi‑face machining. Paired with a 0–220 mm opening, the device accommodates a broad range of component sizes, from small brackets to larger profiles, and supports angled machining operations that would otherwise need extra tooling. The result is shortened cycle times and fewer operator interventions for angled operations. Built for production: robustness meets operational efficiency Weighing 33.3 kg, the vice delivers mass where it matters: on the machine table, enhancing stability for heavy cuts and prolonged cycles. As a mechanical clamping solution, it offers straightforward operation and predictable behaviour under load, which is advantageous for repeat production runs. The robust construction also contributes to long service intervals, reducing maintenance effort and keeping machines productive across shifts. Low‑maintenance design to protect uptime Materials and geometry are selected to balance wear resistance with straightforward upkeep. The heavy‑duty housing and hardened sliding surfaces lower the frequency of adjustments, while the simple mechanical design keeps routine maintenance quick and manageable. For workshops aiming to standardise fixture stocks, this vice offers a dependable core clamping solution that simplifies inventory and reduces unexpected interruptions to production. For tailored advice on integrating the Vertex VWT-4B tilting milling vice into production workflows, contact Metav Werkzeuge in Emmerich for consultancy or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VWT-4B GTIN: 4061905083402 eClass: 21020601 ETIM: EC002173 Facts Opening: 0–220 mm Clamping force: 1200 kgf Accuracy: 0.01 mm Weight: 33.3 kg Dimensions: 110 x 240 x 230 mm Special features Tilting vice Material: Cast iron Type: Mechanical Category: Vertex SKU: VWT-4B FAQ What materials can be machined while clamped in this vice? The Vertex VWT-4B tilting milling vice is built from cast iron and is suitable for general machining of metals commonly used in milling operations; actual material suitability depends on the chosen cutting tools and machining parameters. How is the tilting function adjusted and secured? The tilting mechanism on the VWT-4B is mechanical and designed for stable locking at the set angle to ensure the component remains rigidly clamped during milling operations. Is the vice suitable for production use on heavy cuts? Yes, the vice’s mass (33.3 kg) and the 1200 kgf clamping force provide the stability required for heavier machining passes and continuous production environments. What is the repeatability or precision that can be expected? The device specifies an accuracy of 0.01 mm, delivering the repeatability needed for many precision milling tasks when mounted and operated under suitable machine conditions. Does the vice come ready for mounting on standard machine tables? The VWT-4B is a mechanical tilting vice designed for conventional mounting; compatibility with a specific machine table should be confirmed against the vice’s dimensions and mounting layout. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of robust clamping force and precise repeatability ensures stable, accurate machining and minimal rework. Benefit from a compact footprint and durable mechanical design that supports reliable workshop production. Order the vice directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vertex Machine Vice VA-4 — Mechanical vice with 1500 kgf clamping force and 0–103 mm jaw opening The Vertex Machine Vice VA-4 is a mechanical clamping device designed for general workshop and bench machining, delivering consistent workholding for milling, drilling and light grinding operations. 1500 kgf clamping force 0–103 mm jaw opening High repeatability ±0.01 mm Robust mechanical construction Secure clamping power for uninterrupted machining A strong, repeatable clamping action is essential to avoid part movement during cutting. The VA-4 delivers 1500 kgf of clamping force, which translates into reliable fixation for a wide range of components. This level of force reduces vibration and tool chatter, producing cleaner surfaces and extending cutter life. The mechanical drive is optimised for steady performance and low maintenance, making the vice a pragmatic choice where uptime matters. Precision and repeatability that reduce set-up time Repeatability of 0.01 mm provides a clear advantage for batch production and indexed operations. Accurate repositioning lowers the need for repeated measurement and adjustment between cycles. The vice’s jaw geometry and guided slide minimise lateral play, delivering consistent results part after part. For technicians who measure tolerances in hundredths of a millimetre, this workholding device supports predictable process capability and fewer rejected parts. Durable construction for everyday workshop use Designed for workshop environments, the VA-4 features a robust mechanical construction that withstands regular use. The compact footprint and solid mass contribute to stability on the machine table, while service access is simple for routine checks. The cast components and hardened contact surfaces ensure long-term wear resistance, maintaining clamping integrity under repeated loading and reducing lifecycle costs through lower maintenance needs. Efficient footprint and practical handling for bench and machine With overall dimensions of 351×211×126 mm and a mass of 20 kg, the vice balances stability with manoeuvrability. The 0–103 mm jaw opening covers a broad size range, allowing flexible part clamping without excessive fixture changes. Its form factor is suitable for both manual bench work and fixed installation on milling machines, helping to streamline the workflow and improve shop-floor efficiency. For bespoke set-ups, Metav’s team can advise on mounting and alignment options to match specific machines and fixtures. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex VA-4 into production or to discuss compatible fixturing and delivery options Technical Data Article number: VA-4 GTIN: 4061905083204 Brand: Vertex Facts Clamping force: 1500 kgf Jaw opening: 0–103 mm Accuracy: 0.01 Dimensions: 351×211×126 mm Weight: 20 kg Special features Type: Mechanical eClass: 21020601 ETIM: EC002173 SKU: VA-4 FAQ What materials can be securely clamped with this vice? The Vertex VA-4 (machine vice) secures ferrous and non-ferrous workpieces commonly used in general machining; jaw condition and fixturing should be matched to the specific material and operation. How is the accuracy specification interpreted for daily use? The stated 0.01 repeatability describes the vice’s ability to return to the same clamping position; in practice this helps maintain consistent part datum between operations and reduces setup adjustments. Is the vice suitable for mounting on a milling table? Yes, the mechanical design and compact dimensions of the VA-4 allow straightforward mounting on milling tables and small machining centres where rigid workholding is required. What maintenance does the mechanical vice require? Routine cleaning of chips, light lubrication of the sliding surfaces and periodic inspection of the jaw faces will maintain performance; the VA-4’s design supports easy maintenance without special tools. Can the jaw faces be replaced or customised? Jaw inserts or soft jaws can be fitted to the vice for specific part profiles; consult Metav Werkzeuge for compatible jaw options and custom machining services. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of high clamping force and 0.01 mm precision combined with a reliable locking mechanism for consistent, safe workholding; order the vice directly via Metav Werkzeuge or consult the team for application advice. Vertex VMC-4 Precision Machine Vice with Locking — 1,500 kgf, 0–103 mm opening The Vertex VMC-4 is a precision machine vice designed for accurate and repeatable clamping in machining applications, offering a compact footprint and secure locking for demanding workholding tasks. 1,500 kgf clamping force Precision down to 0.01 mm Locking mechanism for secure hold 0–103 mm opening range Solid 14.2 kg body for stability Consistent accuracy that supports fine machining The vice delivers precision down to 0.01 mm, ensuring repeatable positioning across successive operations. This level of accuracy reduces rework and supports tight tolerances on milled or drilled components. The measured clamping force of 1,500 kgf provides the stability required to prevent micro-movement during cutting, which translates to improved surface finish and dimensional fidelity. For shops aiming to maintain throughput without compromising quality, the combination of precise guidance and robust force offers a clear operational advantage. Secure holding and flexible workpiece accommodation A locking mechanism integrated into the design guarantees secure hold during vibration-prone processes, helping to maintain cut integrity and tool life. The vice accommodates a practical workpiece range with its 0–103 mm opening, making it suitable for a variety of component sizes without frequent fixture changes. The straightforward clamping geometry simplifies setup times while the locking feature ensures that the workpiece remains stationary during heavier passes, providing operational confidence on both one-off and batch runs. Robust construction for stable machine integration With a mass of 14.2 kg and compact dimensions of 108 x 374 x 100 mm, this machine vice provides a low centre of gravity and stable base when mounted to a machine table. The solid construction contributes to reduced chatter and steadier cuts, which is particularly beneficial for precision tasks. Its size and rigidity strike a balance between shop-floor robustness and the space constraints of modern machining centres, enabling efficient integration without excessive footprint. Arrange a technical consultation with Metav Werkzeuge for the Vertex VMC-4 precision machine vice and secure reliable European supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMC-4 GTIN: 4061905084324 Manufacturer: Vertex Facts Accuracy: 0.01 mm Clamping force: 1,500 kgf Opening: 0–103 mm Weight: 14.2 kg Dimensions: 108 x 374 x 100 mm eClass: 21020601 ETIM: EC002173 Special features Locking mechanism Precision machine vice design SKU: VMC-4 FAQ What level of precision can be expected from this machine vice? The Vertex VMC-4 achieves precision down to 0.01 mm, enabling repeatable positioning suitable for fine machining and tight tolerance work. What clamping force does the vice provide and why is it important? The vice offers a clamping force of 1,500 kgf, which secures components firmly to reduce vibration and movement during cutting, improving surface finish and tool life. Which workpiece sizes fit the vice? The opening range of 0–103 mm accommodates a wide variety of standard workpieces, allowing flexible setups without frequent fixture changes. Is the vice stable when mounted on a machine table? Yes; with a weight of 14.2 kg and compact dimensions, the vice provides a low centre of gravity and a stable base that helps minimise chatter during machining. What distinguishes the locking feature from a standard vice? The integrated locking mechanism ensures the clamping arrangement remains fixed under load and vibration, enhancing process reliability and part accuracy. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

A compact mechanical vice that combines 700 kgf clamping force with a 0–85 mm opening and fast adjustment for two-direction movement; Order the Vertex VQW-80 vice directly via Metav Werkzeuge or ask our consultants if needed. Vertex VQW-80 vice – Mechanical vice with quick-adjust and two-direction mobility The Vertex VQW-80 vice is a mechanical workholding solution with quick-adjust function, designed for two-direction movement and reliable bench or machine mounting in workshops and small production environments. Quick adjustment for faster setup Movable in two directions for flexible clamping 700 kgf clamping force for secure workholding 0–85 mm jaw opening for varied workpieces Maximise uptime with robust, high-force clamping The VQW-80 delivers consistent clamping force rated at 700 kgf, ensuring stable fixation of components during machining and assembly. The combination of high clamping capacity and a 0–85 mm opening makes the vice suitable for a wide range of workpiece sizes, reducing the need for frequent re-fixturing. Built for repeatable performance, the unit contributes to shorter cycle times and fewer interruptions in daily production. Flexible positioning for accurate multi-axis workholding A quick-adjust mechanism and two-direction movement enable rapid repositioning of the jaws without extensive disassembly. This mechanical arrangement supports complex set-ups where varying clamping angles or lateral shifts are required. The vice’s structural mass, at 13.5 kg, and a nominal height of 100 mm help to dampen vibration and preserve machining accuracy, documented at 0.01 mm, so tasks that demand tight tolerances can be completed with confidence. Practical workshop integration and maintenance benefits Designed as a straightforward mechanical vice, the VQW-80 integrates easily into existing benches and fixtures and requires minimal servicing. The simple construction facilitates routine checks and lubrication, while the robust build reduces wear under regular use. As a compact solution for general-purpose workholding, it suits toolrooms and small series production where reliable, low-complexity equipment is preferred. For secure, high-force clamping choose the Vertex VQW-80 vice — contact Metav Werkzeuge in Emmerich for specification checks and local supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VQW-80 GTIN: 4061905085000 Manufacturer: Vertex Facts Dimensions: 242x374mm Weight: 13.5 kg Height: 100 mm Clamping force: 700 kgf Jaw opening: 0–85 mm Accuracy: 0.01 mm Type: Mechanical Special features Quick adjustment mechanism Movable in two directions Mechanical vice design SKU: VQW-80 FAQ What clamping force does the vice provide? The vice offers a clamping force of 700 kgf, ensuring secure fixation for machining and assembly operations with the Vertex VQW-80 vice. Which jaw opening range is available? The jaw opening ranges from 0 to 85 mm, allowing the vice to accommodate a broad spectrum of workpiece sizes in workshop applications. Is the vice suitable for precision machining? Yes. The vice is specified with an accuracy of 0.01 mm, making the Vertex VQW-80 vice suitable for tasks that require consistent positional accuracy. Can the vice be repositioned quickly during set-up? The quick-adjust feature and two-direction movement enable fast repositioning and flexible clamping configurations without lengthy disassembly. What are the physical dimensions and weight of the vice? The vice measures 242x374 mm, has a height of 100 mm and weighs 13.5 kg, providing stability for general workshop and production use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of 700 kgf clamping force, 0.01 mm precision, and a stable swivelling and tilting design for reliable workholding and repeatable machining results. Order the vice directly via Metav Werkzeuge or consult our product specialists for tailored advice. VAV-3 Machine Vice by Vertex — Swivelling, Tilting Vice with 700 kgf Clamping Force The VAV-3 machine vice is a swivelling and tilting workholding device designed for general machining tasks where robust clamping and precise positioning are required on milling machines and drill presses High clamping force 700 kgf Precision 0.01 mm repeatability Opening range 0–85 mm Stable base 140 x 190 mm Robust clamping that improves cycle reliability The vice’s 700 kgf clamping force secures workpieces firmly for heavy cuts and interrupted machining without shifting. A solid construction and a 140 x 190 mm base distribute forces evenly to the machine table, reducing vibration transfer and improving tool life. This level of gripping power is particularly beneficial in batch production or when machining tougher materials, where consistent clamping reduces rework and scrap. The result is a measurable improvement in process reliability and throughput. Precision alignment for repeatable setups With a declared accuracy of 0.01 mm, the device supports fine positioning and repeatable setups across multiple parts. The specification refers to the vice’s capacity to maintain position under load and after reclamping; for unfamiliar terms, accuracy denotes the permitted deviation in clamping position relative to a set reference. The combination of close tolerances and a rigid spindle leads to fewer adjustment cycles between setups, saving time during fixture changes and helping to meet tight dimensional tolerances on finished components. Versatile swivelling and tilting for complex fixturing The swivelling and tilting functionality lets operators present the workpiece at optimal angles without additional fixtures. This reduces handling steps and enables angled operations such as inclined drilling or machining compound features. The rotating design aids flexible fixturing for small series and prototype work where quick reorientation is needed. Paired with conventional machine clamping points, the vice becomes a multi-purpose workholding solution that streamlines small-batch production and job-shop flexibility. Compact footprint with substantial mass for stability Measuring approximately 82 x 230 mm and weighing 17.6 kg, the vice provides a compact footprint while offering the mass needed to resist cutting forces. The 0–85 mm opening range suits a wide variety of stock sizes without excessive overhang, and the well-dimensioned base helps maintain table access for clamps or T-slot fixtures. The moderate weight supports quick mounting and repositioning yet gives enough inertia to support heavier cuts, balancing portability and machine stability. Discuss the Vertex VAV-3 with Metav Werkzeuge in Emmerich for a precise match to workshop requirements or request detailed technical information via info@metav-werkzeuge.com Technical data SKU: VAV-3 GTIN: 4061905084997 ECLASS: 21020601 ETIM: EC002173 Dimensions & performance Overall dimensions: 82 x 230 mm Opening range: 0–85 mm Height: 268 mm Base: 140 x 190 mm Weight: 17.6 kg Clamping force: 700 kgf Accuracy: 0.01 mm Special features Swivelling and tilting vice Free rotating type Designed for general machining workholding Brand: Vertex FAQ Is this vice suitable for milling and drilling operations? Yes. The VAV-3 machine vice is intended for milling and drilling where a robust clamping force and accurate positioning are required. What does the 700 kgf clamping force mean in practice? A clamping force of 700 kgf indicates the maximum gripping capacity; on the VAV-3 this translates into stable fixation for heavy cuts and interrupted machining without workpiece movement. How precise is the vice for repeat setups? The device offers an accuracy of 0.01 mm, which supports repeatable setups and helps maintain dimensional tolerances across batches. Can the vice be rotated and tilted on the machine table? Yes. The VAV-3 is a swivelling and tilting vice, allowing angled and rotated setups without additional dedicated fixtures. What mounting area is required on the machine table? The vice sits on a 140 x 190 mm base and occupies roughly 82 x 230 mm of table space, leaving room for typical clamp arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from the combination of hydraulic clamping, a tilting design and a wide 0–205 mm opening to speed up setup and secure workpieces with repeatable force. Order the VUT-4NC directly via Metav Werkzeuge or contact our consultants for application advice and fast delivery from Emmerich. VUT-4NC Machine Vice (Hydraulic, Tilting) by Vertex — 0–205 mm opening the VUT-4NC is a hydraulic, tilting machine vice designed for demanding clamping tasks in machining environments, available in Power (hydraulic) or Quick variants to match production requirements Hydraulic power clamping for steady force Tilting design for angled workholding Opening 0–205 mm for versatile workpieces Consistent clamping through hydraulic power The hydraulic clamping system provides a consistent clamping force that reduces the need for repeated manual adjustments during batch production. Built to deliver steady pressure throughout a machining cycle, this mechanism improves process reliability and contributes to shorter cycle times. Hydraulic actuation also minimises variability between operators, supporting higher repeatability and predictable results across runs. Greater flexibility with a tilting mechanism A tilting design expands the range of possible setups and allows angled machining without complex fixturing. The vice’s 0–205 mm opening accommodates a broad span of component sizes while the swivel capability simplifies access to profiles and faces that would otherwise require repositioning. For workshops that handle varied part geometries, the tilting function reduces setup time and increases throughput for multi‑operation sequences. Robust construction for stable machining The body is cast from cast iron, a material chosen for its vibration damping and long‑term dimensional stability. The vice’s footprint of 285 x 390 x 264 mm and a working height of 502 mm provide a compact yet rigid platform that integrates well on milling tables and machining centres. This combination of rigidity and damping supports improved surface finishes and extends tool life by limiting chatter during heavy cuts. Designed for production use and straightforward maintenance Constructed with everyday workshop practice in mind, the vice combines durable materials and accessible functionality to keep downtime low. The hydraulic Power variant prioritises clamping consistency and reduced manual effort, while the Quick variant supports rapid manual set‑ups where full hydraulic force is not required. Clear mechanical principles make routine checks and preventive maintenance straightforward, helping to secure a dependable production flow and align with Metav’s emphasis on accessible, precision tools. For workshops requiring reliable hydraulic clamping and flexible angled workholding, contact Metav Werkzeuge to discuss the Vertex VUT-4NC and arrange delivery from our Emmerich warehouse Technical data Article number: VUT-4NC GTIN: 4061905083693 Manufacturer: Vertex Dimensions & capacity Dimensions: 285 x 390 x 264 mm Height: 502 mm Opening range: 0–205 mm Materials & features Body material: Cast iron Tilting function; available in Power or Quick variants eClass: 21020601 ETIM: EC002173 FAQ Is the VUT-4NC suitable for use on milling machines and machining centres? The VUT-4NC machine vice is intended for clamping work in machining environments including milling machines and machining centres, where hydraulic or quick clamping simplifies repeatable setups. What is the usable clamping range of the vice? The vice offers an opening range of 0–205 mm, allowing secure clamping of a wide variety of part sizes within that span. How does the hydraulic clamping system benefit production? Hydraulic clamping provides steady, reproducible pressure throughout the machining cycle, which reduces operator variation and supports consistent machining results and shorter cycle times. Can the vice clamp angled or inclined surfaces? Yes, the tilting function enables angled workholding so that faces and profiles can be machined without repeated repositioning, improving setup efficiency. What advantages does the cast iron body offer? A cast iron construction provides rigidity and vibration damping, which helps to improve surface finish and extend tool life by reducing chatter during cutting operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining fast setup, a 700 kgf clamping capacity and reliable repeatability, this mechanical bench vice delivers secure holding and consistent results for demanding workshop tasks. Order the vice directly via Metav Werkzeuge or consult our specialists for application advice. VQS-3 Bench vice with quick-adjust mechanism (Vertex) The VQS-3 is a mechanical bench vice designed for rapid clamping and general workshop use, featuring a fast-adjust function for efficient set-up and a wide jaw opening for versatile applications Quick-adjust mechanism for fast set-up 700 kgf clamping force for secure grip 0–85 mm jaw opening for versatile clamping Compact 7 kg mass for firm bench mounting Faster set-up saves production time The quick-adjust mechanism shortens changeover and reduces idle time by allowing the jaws to be positioned rapidly before final tightening. For serial tasks or mixed small-batch work, this functionality means fewer interruptions and higher throughput. Combined with the 700 kgf nominal clamping capacity, operators gain both speed and secure holding, which supports faster machining cycles and fewer reclamping steps. The result is a measurable improvement in operational efficiency without complex adjustments. Secure grip for varied components A wide 0–85 mm jaw opening covers a broad range of workpiece sizes while the high clamping force ensures parts remain immobilised during cutting, filing or assembly. The vice’s design emphasises consistent pressure distribution to reduce marring and maintain part geometry. This dependable gripping performance minimises rework and improves process stability, which is particularly relevant for production environments where consistency is essential. Precision where it matters The vice provides an accuracy of 0.01, offering repeatable positioning for setups that require tight tolerances. For users with limited metrology equipment, this level of repeatability helps to maintain alignment between operations and supports downstream quality control. Technical terms explained: the stated accuracy refers to the vice’s ability to return to the same clamped position repeatedly, thereby reducing variability between identical operations. Practical build for everyday workshop use Weighing 7 kg and with compact external dimensions, the unit balances portability with bench stability. The mechanical drive avoids electronic complexity, lowering maintenance needs and simplifying integration into established workflows. The robust yet compact construction makes it suitable for metalworking benches and general workshop stations where space is at a premium but reliable clamping is required. For specification clarifications or to request a tailored recommendation for the Vertex VQS-3 bench vice, contact Metav Werkzeuge in Emmerich — our consultants are available by email at info@metav-werkzeuge.com or by phone for a detailed discussion Technical data Article number: VQS-3 Manufacturer: Vertex Type: Mechanical vice EClass: 21020601 ETIM: EC002173 Core specifications Dimensions: 81 x 374 x 70 mm Weight: 7 kg Clamping force: 700 kgf Jaw opening: 0–85 mm Accuracy: 0.01 Special features Quick-adjust mechanism Suitable for bench mounting SKU: VQS-3 GTIN: 4061905084072 FAQ What is the maximum jaw opening of the vice? The jaw opening for the VQS-3 bench vice is 0–85 mm, allowing clamping of a wide range of workpiece sizes. How much clamping force does the unit provide? The vice delivers a clamping force of 700 kgf, providing secure holding for machining and assembly tasks with the Vertex VQS-3. Is the vice suitable for repetitive production work? Yes, the VQS-3 offers repeatable positioning with an accuracy of 0.01, supporting consistent results in repetitive workflows. How heavy is the vice and is it stable on a bench? With a weight of 7 kg, the vice balances portability and stability for firm bench mounting during typical workshop operations. What type of vice is this and who manufactures it? This is a mechanical bench vice manufactured by Vertex; it is listed under the model designation VQS-3 for workshop and light industrial use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a self-centring mechanism, cast iron construction and a high clamping force of 500 kgf provides reliable, vibration-damping hold for milling and drilling operations; excellent for repetitive production tasks. Order the VCV-0611 machine vice directly via Metav Werkzeuge or ask our consultants if needed. VCV-0611 machine vice by Vertex — Self-centring, mechanical vice with optional swivel base A VCV-0611 machine vice designed for secure, repeatable clamping in machining applications, available as a self-centring unit and optionally fitted with a swivel base for flexible setup. Self-centring design for quick workpiece alignment Cast-iron body for damping and stability Clamping opening 0–106 mm for versatile workpieces Secure, repeatable clamping for consistent machining quality The self-centring jaw arrangement delivers fast and uniform alignment of symmetrical workpieces, reducing setup time and minimising repositioning errors. Together with a clamping force of 500 kgf, the device ensures that components remain immobile under cutting loads, improving surface finish and tool life. The design is particularly suited to milling and drilling operations where consistent, repeatable holding is essential for batch production. The result is a measurable improvement in process reliability and throughput when the vice is integrated into a standard machining workflow. Robust construction that reduces vibration and improves accuracy Constructed from cast iron, the vice dampens vibrations generated during machining, which helps protect cutting edges and maintains dimensional integrity. At 5 kg and with compact dimensions of 185 x 61 x 80 mm, the unit offers a stable footprint without occupying excessive machine table space. The option of a swivel base expands clamping orientations, enabling angled setups without complex fixturing. This combination supports operators who require both rigidity and adaptability on manual mills, drilling machines or light CNC machines. Precision and adaptability for workshop and production use With an opening range of 0–106 mm and an indicated accuracy of 0.01 mm, the vice accommodates a broad variety of part sizes while supporting fine positional tolerance where needed. The mechanical actuation provides straightforward maintenance and predictable behaviour across long production runs. As a workholding solution, the device balances precision and durability, making it appropriate for metalworking shops, toolrooms and light manufacturing where dependable clamping and straightforward handling drive productivity gains. For an industrial-grade clamping solution from Vertex, contact Metav Werkzeuge to discuss availability and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VCV-0611 GTIN: 4061905084683 Manufacturer: Vertex Facts Material: Cast iron Clamping force: 500 kgf Opening range: 0–106 mm Accuracy: 0.01 mm Weight: 5 kg Dimensions: 185 x 61 x 80 mm Type: Mechanical eCl@ss: 21020601 ETIM: EC002173 Special features Self-centring design Optional swivel base FAQ What material is the vice made from and why does that matter? The vice is made from cast iron; this material provides damping properties and stability, which reduces vibration during machining and supports consistent surface quality. What is the clamping range and how flexible is it for different parts? The vice offers an opening range of 0–106 mm, allowing secure clamping of a wide variety of component sizes without additional jaws for many common tasks. Can the vice be used on milling machines and drilling machines? Yes, the mechanical design and 500 kgf clamping force make the vice suitable for both milling and drilling applications where rigid holding is required. How precise is the vice for repeatable positioning? The device is specified with an accuracy of 0.01 mm, providing the level of repeatability needed for precision workshop tasks and small-series production. Is a swivel base included and what is the benefit? An optional swivel base is available; it allows angled positioning of the workpiece, increasing flexibility for setups that require compound clamping orientations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of reliable clamping performance, precise repeatability and compact footprint for consistent milling results; order the milling vice directly via Metav Werkzeuge or consult our specialists for selection advice. Vertex VK-4 milling vice — mechanical milling vice with 900 kgf clamping force and 0–62 mm opening The Vertex VK-4 is a mechanical milling vice designed for secure workholding on milling machines and machining centres, offering robust clamping and precise repeatability in a compact form. 900 kgf clamping force 0–62 mm clamping range Repeatability 0.02 mm Compact footprint 310 x 176 x 113 mm Consistent precision for repeatable machining results The VK‑4 delivers measurable accuracy that supports high-quality production. With a stated repeatability of 0.02 mm, the vice stabilises the workpiece position between operations, reducing the need for repeated set-ups and minimising scrap. This level of control benefits jobs that require tight tolerances or serial milling, where precision is essential to maintain part interchangeability. The mechanical clamping mechanism provides a predictable gripping behaviour, making inspection and process planning more straightforward for workshop managers and NC programmers. Secure holding power for demanding milling operations A clamping force of 900 kgf ensures the vice sustains lateral and rotational loads during heavy cuts, while the 0–62 mm opening accommodates a wide range of workpiece sizes. The mass of the unit (10 kg) and its stable base reduce vibrational movement, which improves surface finish and extends tool life. For production environments, the combination of high clamping pressure and substantial mass translates into fewer interruptions and a reduced risk of workpiece shift under load — a direct contribution to process efficiency and machine uptime. Compact, service-friendly design that fits most machine tables With compact dimensions of 310 x 176 x 113 mm, the vice integrates easily onto standard T‑slot tables without monopolising space, enabling flexible fixturing arrangements. The mechanical design simplifies maintenance: periodic cleaning and lubrication are sufficient to retain performance, avoiding complex servicing routines. As a straightforward workholding solution, the clamp is suitable for toolrooms, training workshops and industrial cells where dependable, easy-to-manage equipment is required to support consistent throughput. Choose the Vertex VK‑4 for dependable precision and contact Metav Werkzeuge for tailored advice and delivery from our European hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VK-4 GTIN: 4061905084676 Brand: Vertex Facts Clamping force: 900 kgf Clamping range: 0–62 mm Repeatability / accuracy: 0.02 mm Weight: 10 kg Dimensions: 310 x 176 x 113 mm Special features Mechanical milling vice SKU: VK-4 eClass: 21020601 ETIM: EC002173 FAQ What accuracy can be expected from this milling vice? The VK‑4 by Vertex achieves repeatability of approximately 0.02 mm, ensuring consistent repositioning between operations for reliable tolerance control. Which workpiece sizes can be clamped? The vice accommodates workpieces within a 0–62 mm jaw opening, covering a broad range of small to medium parts commonly used in milling tasks. How much clamping force does the vice provide? This mechanical vice provides up to 900 kgf of clamping force, offering secure fixation for moderate to heavy milling cuts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from the combination of a robust 800 kgf clamping force, a wide 0–85 mm jaw opening and 0.01 mm repeatability for dependable drilling and milling operations; order directly via Metav Werkzeuge or request application advice from our consultants. VW-3 Drilling and milling vice — 3-stage adjustable, 800 kgf clamping force (Vertex) The VW-3 is a three-stage adjustable drilling and milling vice engineered for secure, repeatable clamping in metalworking and toolroom applications. 3-stage adjustable positioning 800 kgf clamping force for secure hold 0–85 mm jaw opening for versatile workpieces High repeatability with 0.01 mm accuracy Secure clamping for repeatable precision The vice delivers a high clamping force that stabilises workpieces during both drilling and milling, reducing chatter and improving hole quality. The specified 0.01 mm repeatability supports tight tolerances common in toolmaking and precision engineering. By converting mechanical input into a consistently firm grip, the unit reduces rework and supports predictable part quality, which is critical when multiple setups must match within micrometric margins. Save time with quick, adaptable setups The three-stage adjustable design enables rapid changes of clamp height and orientation, shortening setup cycles on the machine table. The device’s mass (16.7 kg) contributes to vibration damping, which complements the mechanical design to keep cutting forces stable. For production environments where setup time directly affects throughput, the vice’s adaptability and robust construction deliver a clear efficiency advantage without complex adjustment procedures. Designed for workshop reliability and broad compatibility Constructed for mechanical operation, the vice is suitable for conventional and CNC-assisted drilling and light milling tasks where dependable, repeatable clamping is required. The broad 0–85 mm jaw opening accommodates a wide range of blanks and fixtures; combined with the vice’s repeatability, this makes it suitable for batch work and small-series production. The simple, service-friendly mechanical design minimises maintenance effort while providing the stability expected in professional workshops. Purchase confidence and support from a European quality partner Metav’s role as a precision partner brings additional assurance: a long-standing customer base and a comprehensive product range reduce procurement risk and simplify sourcing. With a dedicated quality filter in Emmerich and decades of sector experience, Metav supports workshop owners and procurement specialists with reliable supply chains and product advice. The vice’s technical characteristics align with the practical needs of industry and trade, offering a balanced combination of performance, durability and ease of use. Contact Metav Werkzeuge in Emmerich or via info@metav-werkzeuge.com to discuss whether the VW-3 is suited to a specific machining task or to arrange delivery from our European quality centre Technical data SKU: VW-3 GTIN: 4061905084942 Manufacturer: Vertex Type: Mechanical Dimensions: 370 x 240 x 157 mm Weight: 16.7 kg Accuracy / repeatability: 0.01 mm Clamping force: 800 kgf Jaw opening: 0–85 mm 3-stage adjustable Designed for drilling and milling ECLASS: 21020601 ETIM: EC002173 FAQ What is the maximum jaw opening of the vice? The vice provides a jaw opening of 0–85 mm, enabling clamping of a wide range of workpiece sizes for drilling and light milling. How precise is clamping with this vice? Repeatability is specified as 0.01 mm, which ensures consistent positioning across multiple setups when using the VW-3 vice from Vertex. What clamping force does the vice deliver? The unit offers a clamping force of 800 kgf, designed to hold parts securely during machining operations to reduce vibration and improve surface quality. Is the vice adjustable for different heights or orientations? Yes, the three-stage adjustable mechanism allows rapid reconfiguration of clamp height and orientation to suit varied fixturing requirements. How heavy is the vice and why does that matter? The vice weighs 16.7 kg; the mass helps damp cutting vibrations and contributes to stable machining conditions on the worktable. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of 3000 kgf clamping force, compact cast iron construction and a precise 0–125 mm jaw travel ensures stable, repeatable machining and a long service life; order directly via Metav Werkzeuge or consult the team for application-specific advice. VMC-100HV Precision machine vice — compact, power-enhanced clamping for machining centres (Vertex) VMC-100HV is a precision machine vice designed for secure clamping in milling and machining applications, combining a compact footprint with high clamping capacity for demanding repeatability. 3,000 kgf clamping force for secure fixation Compact cast iron construction, 27 kg mass 0–125 mm adjustable jaw opening range Mechanical and hydraulic operation options Stable machining through high clamping force and mass The vice delivers a 3,000 kgf clamping force, providing a firm hold that minimises part movement during aggressive cutting. Combined with a 27 kg mass and cast iron body, vibration is damped effectively, which reduces tool wear and improves surface finish. This stability translates into fewer rejects and lower rework rates, making the device a pragmatic choice for production environments where consistency matters. Precision features that reduce setup time and ensure repeatability With an adjustable jaw travel of 0–125 mm and a stated accuracy of 0.01, the unit supports tight tolerances and repeatable positioning for serial work. The mechanical layout is engineered for straightforward alignment on machine tables, so fixture times are economical and cycle variability is reduced. The compact design keeps the vice accessible on most machining centres without compromising the available working envelope. Flexible operation to match workshop workflows The hybrid mechanical and hydraulic design allows integration into diverse shopfloor setups: hydraulic actuation offers rapid, even clamping for higher throughput, while mechanical control provides a simple, serviceable option for lower-volume tasks. The combination of operation modes gives procurement and maintenance teams choice without the need to invest in multiple vice types, supporting a lean tooling strategy. Robust materials and design for long service life Constructed from cast iron and engineered for machine-room durability, the vice resists deformation under load and maintains clamping stability over time. The compact dimensions support dense fixture layouts on pallets and smaller tables, while the overall build quality reduces the need for frequent replacement—an indirect saving that benefits total cost of ownership. Contact Metav Werkzeuge for tailored advice on integrating the VMC-100HV into existing setups and to discuss fast delivery from our Emmerich warehouse Technical data SKU: VMC-100HV GTIN: 4061905083785 ECLASS: 21020601 ETIM: EC002173 Facts Dimensions: 100x470x130 mm Jaw opening: 0–125 mm Clamping force: 3000 kgf Weight: 27 kg Accuracy: 0.01 Special features Material: Cast iron Type: Mechanical and hydraulic Design: Compact, power-enhanced Brand: Vertex FAQ What is the maximum jaw opening of the vice? The vice offers a jaw opening of 0–125 mm, suitable for a broad range of workpiece sizes. How much clamping force does the unit provide? Clamping force is specified at 3,000 kgf, which ensures secure fixation for heavy cutting operations. Is the vice suitable for production use on machining centres? The VMC-100HV is built for machine applications; its combination of mass, precision and clamping force supports serial machining with consistent results. What materials is the vice constructed from? The main body is cast iron, chosen for its damping properties and long-term dimensional stability. Does the vice support hydraulic and mechanical actuation? Yes, the model features both mechanical and hydraulic operation options to fit different workshop workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of 450 kgf clamping force, prism jaws and a compact footprint for secure, repeatable clamping in drilling and light machining tasks. Order the vice directly via Metav Werkzeuge or consult our advisors for configuration and delivery. VRV-4 Drill vice — Mechanical vice with prism jaws and high clamping force The VRV-4 is a mechanical drill vice with prism jaws, designed to secure cylindrical and round workpieces during drilling and light machining operations. High 450 kgf clamping force Prism jaws for cylindrical parts Opening range 0–128 mm Robust 9.8 kg workshop design Secure clamping that improves machining consistency The vice delivers 450 kgf of clamping force via a screw-driven mechanism, providing a consistent hold that reduces movement and rework during drilling. The integrated prism jaws centre round bars and tubes automatically, which simplifies setup and shortens cycle times. By using a mechanical clamp with defined clamping force, operators gain measurable improvements in hole quality and repeatability without relying on complex hydraulic systems. Built for dependable workshop use and straightforward handling With a solid, compact build of 9.8 kg, the unit balances stability and portability for bench-mounted applications. The mechanical drive avoids electronic components, reducing maintenance points and downtime; this results in a durable vice that remains serviceable under regular workshop use. The design supports quick part placement and secure locking, helping to maintain throughput in production or small-batch work. Small footprint with clear installation and positioning advantages Measuring 177 x 471 x 73 mm, the vice fits easily on most drill benches and small machining tables while still allowing a clamping opening of 0–128 mm to cover a broad range of stock diameters. The compact dimensions and defined clamping characteristics make integration into existing workflows straightforward, and the vice’s repeatable mechanical action supports accurate alignment and positioning for successive machining steps. For reliable workshop clamping with Vertex quality, contact Metav Werkzeuge in Emmerich for tailored advice and fast delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VRV-4 GTIN: 4061905084263 Type: Mechanical ECLASS: 21020601 ETIM: EC002173 Facts Dimensions: 177 x 471 x 73 mm Weight: 9.8 kg Opening range: 0–128 mm Clamping force: 450 kgf Special features Prism jaws (for cylindrical parts) Mechanical operation Drill vice design Compact workshop footprint FAQ What clamping range does the vice offer? The vice provides an opening range of 0–128 mm, suitable for a wide variety of small-diameter workpieces. How much clamping force is available? Clamping force is 450 kgf, delivering a secure grip for reliable drilling and light machining. Is the vice suitable for round bars and tubes? Yes — the prism jaws are designed to centre and support cylindrical stock for accurate drilling. What are the overall dimensions and weight? Overall dimensions are 177 x 471 x 73 mm and the unit weighs 9.8 kg, allowing easy placement on standard drill benches. Which brand and model is this vice? This is the Vertex VRV-4 mechanical drill vice (SKU VRV-4) featuring prism jaws and a high clamping force. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust cast iron construction combined with a 24 kN clamping force delivers secure, repeatable holding for machining tasks; the very high jaws and 0–160 mm opening accommodate taller components without compromise. Order the machine vice directly via Metav Werkzeuge or consult our specialists for application advice. Vertex VQHJ-5 Machine Vice – Hydraulic & Standard, Very High Jaws The VQHJ-5 is a machine vice designed for milling and machining operations, featuring very high jaws and dual hydraulic and standard operation for versatile clamping of tall workpieces High clamping force 24 kN Opening range 0–160 mm Cast iron body for stability Very high jaws for tall components Built for dependable clamping and repeatable accuracy The vice’s cast iron body provides a stable, vibration-damping base that supports precision machining and repeatability. With a rated clamping force of 24 kN, the unit holds workpieces firmly during heavy milling or drilling, reducing the risk of movement that can cause defects. The robust construction contributes to long service life and consistent results, so production runs maintain part tolerances and surface finish quality. Designed to handle tall and awkward components without compromise The very high jaws allow secure gripping of taller or irregularly shaped components that standard vices struggle with, enabling vertical clamping and improved access for tool paths. The 0–160 mm opening range gives measurable flexibility for different workpiece sizes while preserving alignment and parallelism. This capacity reduces the need for complex fixturing, streamlines setup times and supports efficient workflow in jobbing and serial production. Dual operation for flexible workshop workflows Configured for both hydraulic and standard operation, the device adapts to workshop preferences and machine interfaces, offering automated clamping where required and manual control when precision adjustment is needed. The vice’s overall dimensions of 135 x 478.5 x 223 mm and a mass of 51.8 kg balance rigidity with manageable footprint, making it suitable for a broad range of machining centres. The combined features support higher throughput and lower rework rates by simplifying clamping procedures and improving process reliability. Contact Metav Werkzeuge in Emmerich for application-specific recommendations, availability and to arrange a specification check for this Vertex VQHJ-5 machine vice Technical Data Article number: VQHJ-5 GTIN: 4061905084744 Manufacturer: Vertex ECLASS: 21020601 ETIM: EC002173 Core specifications Dimensions: 135 x 478.5 x 223 mm Weight: 51.8 kg Clamping force: 24 kN Opening range: 0–160 mm SKU: VQHJ-5 Materials & special features Material: cast iron Type: hydraulic and standard operation Very high jaws for tall workpieces Product category: machine vice FAQ What clamping force does the vice provide? The Vertex VQHJ-5 machine vice provides a clamping force of 24 kN, ensuring secure holding during heavy machining. Is the vice suitable for tall workpieces? Yes, the device features very high jaws and an opening range of 0–160 mm, designed specifically to accommodate taller components. What material is the vice made from? The vice is manufactured from cast iron, chosen for rigidity and vibration damping to improve machining accuracy. Can the vice be used with hydraulic systems? The unit supports hydraulic and standard operation, allowing integration with hydraulic clamping where required and manual control when preferred. What are the physical dimensions and weight? Overall dimensions are 135 x 478.5 x 223 mm and the weight is 51.8 kg, offering a stable yet space-efficient footprint. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take full advantage of the power-assisted clamping and 40 kN holding force for secure, repeatable setups in milling and drilling operations; select the left-hand version when machine orientation requires it. Order directly via Metav Werkzeuge or contact the consultants for application advice. VQCV-125H-L Universal machine vice (power-assisted, left-hand) by Vertex The VQCV-125H-L is a power-assisted universal machine vice designed for precision clamping in machining centres and workshop tables, suited to tasks that demand stable fixation and repeatable positioning Power-assisted design with 40 kN clamping force Left-hand configuration for specialised setups 0–165 mm opening range for versatile workpieces Secure, repeatable clamping for heavy machining The VQCV-125H-L combines a power-assisted mechanism with a rated 40 kN clamping force to reduce workpiece movement under load and minimise slippage during aggressive cuts. This repeatable clamping improves process reliability and reduces rework, which is particularly relevant for production environments and jobbing shops where throughput and consistency matter. The mechanical drive is straightforward to maintain, offering predictable behaviour across shifts and operators. Adaptable jaw travel and fine positional accuracy With an opening range of 0–165 mm and a specified positional accuracy of 0.01 mm, the vice accommodates a wide variety of component sizes while enabling precise alignment for sequential operations. The adjustable jaw travel supports quick set-ups for both short runs and prototype work, and the narrow tolerance contributes to repeatable reference points when using edge-finding or dial indicators. These characteristics make the tool suitable for both fixture work and direct machine table clamping. Stable mass and left-hand orientation for machine integration Weighing 53 kg, the vice provides substantial mass that dampens vibration and enhances stability on the machine bed, which helps preserve tool life and surface finish in heavy-duty milling. The left-hand configuration is useful where spindle approach, machine tool layout or workholding fixtures demand a handed arrangement. The robust mechanical construction supports frequent clamping cycles and reduces the need for repositioning during multi-step machining sequences. Delivered by a precision partner with European support Sourcing through Metav Werkzeuge ensures access to a curated selection of precision tools and an experienced advisory team. Metav stands for the democratisation of precision and supports workshop efficiency with a broad product range, a dependable European stock point and service that reflects decades of industry experience. The supply chain focus in Emmerich acts as a quality filter for the market, contributing to consistent availability and straightforward ordering for trade customers. Contact Metav Werkzeuge for application matching and to arrange supply of the Vertex VQCV-125H-L; expert advice is available if specification matching or integration details are required Technical data Article number: VQCV-125H-L GTIN: 4061905083372 Manufacturer: Vertex Facts Dimensions: 135 x 477.5 x 180 mm Weight: 53 kg Opening range: 0–165 mm Clamping force: 40 kN Accuracy: 0.01 Special features Left-hand version Power-assisted / force-amplified design Universal machine vice for machining applications Mechanical operation FAQ What clamping force does the vice provide? The clamping force is 40 kN for the Vertex VQCV-125H-L universal machine vice, delivering strong fixation for demanding cuts. Is the VQCV-125H-L suitable for small workpieces? Yes, the 0–165 mm opening range allows the vice to hold both small and medium-sized components securely for machining tasks. How precise is the positioning when using this vice? The vice is specified with an accuracy of 0.01 mm, providing the positional consistency needed for sequential machining and fixture work. Does the vice require special mounting or fixtures? Standard mechanical mounting on the machine table is used; the vice’s mass (53 kg) and left-hand arrangement support stable integration into most machining set-ups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of hydraulic power, high clamping force and fine accuracy to streamline machining operations; order the item directly via Metav Werkzeuge or consult the specialists for tailored recommendations. Vertex VH-4 Hydraulic Machine Vice – 2,500 kgf clamping force, 0–170 mm opening A Vertex VH-4 hydraulic vice engineered for secure and repeatable workholding in milling machines and machining centres. 2,500 kgf clamping force for heavy-duty work 0–170 mm adjustable opening range High precision with 0.02 mm accuracy Robust 28 kg construction for stability Consistent heavy-duty clamping for demanding machining The hydraulic drive delivers steady, repeatable clamping that minimises slippage during aggressive cuts. With a rated 2,500 kgf clamping force and an opening range of 0–170 mm, the vice secures a wide variety of workpieces without frequent repositioning. The substantial mass and robust construction contribute to vibration damping and stable machining, which reduces tool wear and extends cycle life. Designed for production and jobbing environments, this vice supports uninterrupted processing where firm workholding is critical. Engineered accuracy improves process reliability Precision is central to stable production; the vice is specified with 0.02 mm accuracy, improving positional repeatability between setups. This level of control helps maintain tolerances across batches and simplifies downstream inspection. The mechanical layout, combined with hydraulic actuation, ensures consistent jaw alignment and clamping pressure, resulting in fewer rejects and less rework. For users assessing process capability, the repeatability characteristics translate directly into predictable part quality and more efficient throughput. Ready for integration and straightforward operation Mounting and routine handling are uncomplicated thanks to clear external dimensions (443 x 270 x 135 mm) and a compact footprint that fits most machining worktables. At approximately 28 kg, the unit balances portability for repositioning with the mass required for stable cutting. The vice’s classification data (ECLASS and ETIM) support compatibility checks in engineering procurement systems, while the solid construction minimises maintenance intervals. Where uptime matters, reliable workholding and straightforward serviceability keep production moving. Contact Metav Werkzeuge for detailed integration advice and secure supply directly from our Emmerich quality hub Technical Data SKU: VH-4 GTIN: 4061905084171 Manufacturer: Vertex Type: Hydraulic Core specifications Clamping force: 2,500 kgf Opening range: 0–170 mm Accuracy: 0.02 mm Weight: 28 kg Dimensions: 443 x 270 x 135 mm Features & compatibility Hydraulic operation ECLASS: 21020601 ETIM: EC002173 Robust construction for vibration damping FAQ What clamping force does the vice provide? The vice offers a clamping force of 2,500 kgf, providing secure workholding for heavy-duty machining operations. Which opening range is supported for different workpieces? The vice supports an adjustable opening range of 0–170 mm, allowing adaptable clamping across a broad variety of part sizes. How precise is the workholding alignment? The vice is specified with 0.02 mm accuracy, ensuring high repeatability and consistent part tolerances during serial production. Is the vice suitable for mounting on standard milling tables? Yes, the compact footprint (443 x 270 x 135 mm) and mounting compatibility make it suitable for common milling and machining tables. What benefits does hydraulic actuation bring compared with mechanical vices? Hydraulic actuation provides smoother and more consistent clamping pressure, improving repeatability and reducing the risk of part movement under load. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the forward-tilting hydraulic design with a 2,500 kgf clamping force and 0.01 mm repeatability to secure workpieces reliably while reducing setup time — order the vice directly via Metav Werkzeuge or request advice from our consultants. Vertex VHT-4 Hydraulic Machine Vice (forward-tilting, 2,500 kgf clamping force) The VHT-4 Hydraulic Machine Vice is a forward-tilting clamping solution designed for demanding milling and machining applications where repeatable, high clamping forces and easy access to the workpiece are required Forward-tilting design for angled clamping 2,500 kgf clamping force 0–170 mm clamping range High precision: 0.01 mm repeatability Robust 33.3 kg construction Consistent clamping for repeatable production Hydraulic clamping delivers a predictable and steady force that minimises variability between cycles. The integrated hydraulic mechanism on this machine vice ensures a uniform 2,500 kgf of clamping pressure, which reduces the risk of slippage under heavy machining loads and improves part consistency. The result is shorter inspection runs and fewer rejected components, so throughput and shop-floor efficiency are improved without compromising safety. The design supports high cutting forces while protecting delicate fixturing and tooling through even pressure distribution. Easier setup and superior accessibility for complex parts A forward-tilting vice enables more versatile part placement and easier tool approach angles compared with fixed horizontal vices. With a 0–170 mm clamping range, the unit accommodates a broad spectrum of component sizes and profiles, making it suitable for prototyping as well as small-batch production. The tilting feature reduces the need for auxiliary fixtures to obtain angled clamping positions, which shortens setup time and simplifies repeated jobs. For machine shops aiming to reduce non-productive time, this configuration offers clear operational advantages. Precision and rigidity where it matters Accuracy is central to machining quality; the vice offers a nominal 0.01 mm repeatability that supports tight tolerance work. The substantial mass of the unit — approximately 33.3 kg — contributes to vibration damping and structural rigidity during heavy milling and boring operations. Those properties combine to maintain cutting stability and preserve tool life, which in turn lowers overall operating costs. The geometry and finish of the clamping faces are engineered to secure workpieces reliably while minimising deformation. Practical operation and workshop integration The hydraulic actuation on this vice reduces manual effort and streamlines clamping operations, enabling faster cycle times in automated or semi-automated environments. Its construction and finish are optimised for integration on standard machine tables; the vice is compatible with typical machining centre workflows and offers a compact footprint of 500x240x230 mm. For purchasers seeking scalable solutions, the unit’s repeatable hydraulic performance and robust build make it a dependable choice for continuous production environments. For tailored specification advice or to arrange supply of the Vertex VHT-4 via Metav Werkzeuge, please contact Metav’s sales team in Emmerich — they will assist with suitability assessments and order processing Technical data SKU: VHT-4 GTIN: 4061905084850 ECLASS: 21020601 ETIM: EC002173 Type: Hydraulisch Designation: Hydraulischer Maschinenschraubstock (kippbar) Special feature: vorwärts kippbar Dimensions: 500x240x230 mm Core measurements Clamping force: 2,500 kgf Opening range: 0–170 mm Accuracy / repeatability: 0.01 mm Weight: 33.3 kg Features & specifications Forward-tilting clamping capability Hydraulic actuation for consistent force Suitable for milling and machining applications Compact footprint for bench and machine table use Manufacturer: Vertex FAQ What clamping force does this vice provide? The vice delivers a clamping force of 2,500 kgf, specified for the Vertex VHT-4 hydraulic machine vice to secure heavy machining loads. What workpiece sizes are supported? The unit accepts workpieces within a 0–170 mm clamping range, allowing flexible use for small to medium components. How precise is the clamping repeatability? Repeatability is rated at 0.01 mm, which supports precision machining and consistent part quality with the Vertex VHT-4. Is the vice suitable for angled clamping setups? Yes, the forward-tilting design enables angled-clamping arrangements without complex additional fixtures, improving accessibility for tool approaches. What are the vice dimensions and weight for machine-table planning? The vice measures 500x240x230 mm and weighs approximately 33.3 kg, providing stability while keeping a compact footprint. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a combination of high clamping force and wide opening for dependable workholding; the robust mechanical construction supports stable machining and consistent results. Order the vice directly via Metav Werkzeuge or request personalised advice from our consultants in Emmerich for specification checks. VCM-47 mechanical machine vice — 450 kgf clamping force, 0–180 mm opening The VCM-47 is a mechanical machine vice designed for secure clamping in milling and general machining applications, offering a wide opening and precise hold for diverse workpieces. 450 kgf clamping force for secure gripping 0–180 mm opening to accept varied workpiece sizes Accuracy 0.01 mm for precise machining Robust 17.7 kg body for vibration damping Secure, reliable workholding for consistent machining results The vice excels where repeatable clamping and process reliability matter. With a 450 kgf rated clamping capacity and a 0–180 mm jaw opening, the unit keeps components firmly located during cutting and finishing operations. This level of hold reduces workpiece movement and tool wear, supporting higher throughput and fewer rejects. The design suits bench-mounted and machine-table applications where a dependable machine vice is required for milling, drilling or light planing tasks. Precision and stability that support tight tolerances A guaranteed positioning accuracy of 0.01 mm underlines the vice's suitability for jobs demanding fine tolerances. The substantial mass — 17.7 kg — contributes to stability by damping machine vibrations and preventing micro-movements during machining. For customers new to metrology terms: the accuracy figure denotes the repeatability of the jaw position, ensuring identical set-ups across multiple runs and predictable surface finishes. The combined effect is fewer reworks and improved process control. Simple integration and durable mechanical design for the workshop The mechanically driven construction provides a maintenance-friendly alternative to complex hydraulic or pneumatic systems, reducing potential downtime. The mechanical design uses proven components for long service life and straightforward adjustments at the workbench. Supplied dimensions make planning for fixture layouts simple — the compact footprint aids in mounting on standard machine tables while the robust build supports heavy-duty clamping cycles. As a partner, Metav Werkzeuge offers practical purchasing and logistics support from its Emmerich location to streamline supply into the workshop. For tailored specification support or to arrange supply through Metav Werkzeuge in Emmerich, please contact our sales team via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: VCM-47 GTIN: 4061905083259 Type: Mechanical ECLASS: 21020601 ETIM: EC002173 Facts Dimensions: 108 × 470 × 98 mm Weight: 17.7 kg Clamping force: 450 kgf Opening range: 0–180 mm Accuracy: 0.01 mm Special features Mechanical vice for machine table use Robust construction for vibration damping Suitable for milling and general machining Brand: Vertex FAQ What clamping capacity does the vice offer? The vice provides a clamping force of 450 kgf, ensuring secure gripping of workpieces during machining operations with the VCM-47 mechanical machine vice. What is the usable jaw opening range? The jaw opening spans 0–180 mm, allowing versatile accommodation of components of different widths for various machining tasks. How precise is the positioning of the jaws? The unit is specified to an accuracy of 0.01 mm, offering repeatable positioning suitable for tasks requiring close tolerances. Is the vice suitable for heavy-duty milling? The robust 17.7 kg construction and high clamping force make the vice well suited to demanding milling operations where vibration damping and secure workholding are required. Can the vice be mounted on standard machine tables? Yes, the compact dimensions and mechanical design facilitate mounting on common machine tables and fixture setups for straightforward integration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a combination of rapid set‑up, a 450 kgf clamping force and 0.01 mm repeatability to maintain tight tolerances across serial runs; order the VCV‑44 directly via Metav Werkzeuge or consult our specialists for application advice. VCV-44 — Self‑centring machine vise with 450 kgf clamping force and 0.01 mm accuracy (Vertex) The VCV-44 is a self‑centring machine vise engineered for precision clamping in milling machines and machining centres, providing consistent alignment and reliable holding across a broad range of component sizes. Self‑centring operation for quick set‑up 450 kgf clamping force for secure hold 0.01 mm repeatability for precision work 0–185 mm clamping range for versatile parts Faster set‑up through self‑centring alignment The self‑centring mechanism reduces fixture time and ensures symmetric gripping of round or irregular components. By automatically aligning the jaws, the vise shortens preparation cycles and lowers setup variance — a clear advantage when handling repetitive batches. The self‑centring function also simplifies the positioning process compared with single‑jaw fixtures, supporting faster throughput without sacrificing alignment quality. Secure clamping that stabilises machining High holding force is essential for chip removal and surface finish. The VCV‑44 delivers a 450 kgf clamping force that maintains a steady grip during heavy cuts and interrupted machining. Its mass contributes to overall stability: at 17.7 kg, the vice provides damping against vibration, helping to protect cutting tools and machine spindles while improving part quality and reducing rework rates. Precision repeatability for tight tolerances Repeatable positioning is vital for process control. With a documented 0.01 mm repeatability, the vice allows reliable re‑clamping of parts to the same datum, which supports tighter statistical process control and repeatable inspection results. For shops moving from manual fixturing to more consistent setups, this level of precision reduces scrap and shortens the feedback loop between setup and quality assurance. Practical dimensions and workshop integration Compact installation dimensions of 469 x 108 x 98 mm and a jaw opening of 0–185 mm make the vice adaptable to a wide range of components without wasting machine table space. The VCV‑44’s clear specification and robust design permit straightforward integration into standard vice plates or T‑slot tables. As a Vertex product, the unit fits established industrial workflows and can be referenced by its SKU VCV‑44 when ordering or specifying fixtures. Choose the Vertex VCV‑44 for dependable, repeatable clamping and contact Metav Werkzeuge in Emmerich for detailed application advice — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data Article number: VCV-44 GTIN: 4061905084652 Manufacturer: Vertex Facts Opening: 0–185 mm Clamping force: 450 kgf Accuracy / repeatability: 0.01 mm Weight: 17.7 kg Dimensions: 469 x 108 x 98 mm Special features Self‑centring machine vise SKU: VCV-44 Eclass: 21020601 ETIM: EC001959 FAQ What is the maximum jaw opening of the vise? The VCV‑44 has a jaw opening range of 0–185 mm, suitable for a broad spectrum of workpieces. How much clamping force does the vice provide? The vice delivers a clamping force of 450 kgf, ensuring secure holding during demanding machining operations. What level of repeatability can be expected? Repeatability for the VCV‑44 is specified at 0.01 mm, supporting tight tolerances and consistent re‑clamping. Is the VCV‑44 suitable for use on vertical and horizontal milling machines? Yes, the VCV‑44 is designed for integration into milling machines and machining centres where precision clamping is required. How heavy is the unit and what are the external dimensions? The vice weighs 17.7 kg and measures 469 x 108 x 98 mm, making it compact yet stable for workshop use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan