Precision marking tools for accurate setup and machining
Precision marking tools such as scribing sets and scribers are essential for laying out work in metalworking and woodworking, enabling machinists and fitters to transfer exact lines and points for drilling, milling and cutting. These tools serve to produce fine reference lines on materials like metal, wood and plastic, ensuring correct alignment and repeatable results when combined with a precision caliper or other measuring aids. Using a quality scriber, scribing set and precision caliper improves setup speed, reduces setup errors and supports consistent tolerances across batches.
100 x 70 mm Centre Square Matt Chrome Plated, 0.2 kg - Metav IndustryLine
Benefit from a robust tool steel construction, a matt‑chrome scale and compact 100 × 70 mm geometry for reliable centre marking and quick set‑up in the workshop; order directly via Metav Werkzeuge or consult the technical team for batch or integration advice. Centring Square 100 x 70 mm — Marking‑out square with matt‑chrome finish from Metav IndustryLine A Centring Square 100 x 70 mm designed for precise centre marking and alignment in machine shops and metalworking benches Tool steel, rust‑protected finish Matt‑chrome scale for clear readings Compact 100 × 70 mm geometry Suitable for shaft Ø90 mm alignment Precise centre marking for faster machine set‑up The compact geometry and machined reference faces deliver consistently reproducible results when establishing centres or transfer lines. Manufactured from tool steel with a matt‑chrome finish, the device minimises deformation and wear during repeated use, ensuring stable repeatability over many cycles. The square’s profile and right‑angle accuracy make it a dependable aid for marking out on shafts, flanges and workpieces before drilling, turning or milling. Where setup speed and alignment consistency matter, this marking‑out tool reduces rework and supports efficient production workflows. Durable finish and contrast‑optimised scale to cut error rates A matt‑chrome scale and rust‑protected body reduce glare and enhance legibility under workshop lighting, which lowers the probability of misreading marks. The finish also adds a corrosion‑resistant barrier that preserves the reference faces and graduations, extending service life in demanding environments. Clear markings and stable surfaces translate directly into fewer measurement corrections and a steadier process capability, so inspection and set‑up steps remain both faster and more reliable. Compact format that integrates into everyday workshop routines The small footprint and straightforward geometry suit bench work, toolroom stations and on‑machine set‑up alike. Intended as a practical marking‑out companion, the square fits into standard tool drawers and can be paired with calipers for cross checks; it is noted as suitable for use with a caliper on shaft Ø90 mm. The lightweight, precise design supports quick handlings, such as clamping and re‑positioning, while the familiar form factor aids integration into existing procedures without additional training. The product is listed as M214.170 and follows the Metav IndustryLine quality approach for consistent, workshop‑ready performance. Contact Metav Werkzeuge in Emmerich for technical advice or to discuss integration of the Metav IndustryLine Centring Square M214.170 — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M214.170 GTIN / EAN: 4054469106984 Category: Marking‑out tools (Anreisszeuge) Customs tariff number: 90172039 Facts Dimensions: 100 × 70 mm Material: tool steel Finish: matt‑chrome, rust‑protected Suitable for caliper use on shaft Ø90 mm Special features Machined right‑angle reference faces Matt‑chrome scale for improved contrast Compact marking‑out geometry for bench and machine use Emphasises repeatability and workshop durability FAQ Is the centring square suitable for marking centres on shafts? The Centring Square 100 x 70 mm is intended for centre marking and is suitable for alignment tasks on shafts, noted for compatibility with caliper checks on shaft Ø90 mm. What material and finish are used for the square? This marking‑out square is made from tool steel with a rust‑protected, matt‑chrome finish that improves durability and scale legibility. How does the matt‑chrome scale help in daily use? The matt‑chrome scale reduces reflections and glare, making graduations easier to read under workshop illumination and therefore reducing the chance of marking errors. Can the square be used for both workshop and machine‑shop setups? Yes, the compact geometry and machined reference faces make the square suitable for bench work, toolroom tasks and on‑machine set‑ups where precise centre marking is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Ruler Aluminium With Handle Recess 50x5mm Silver Anodised, Laser-Scaled - TECWERK
Take advantage of the combination of a laser-engraved mm scale, a rigid 50 x 5 mm aluminium profile and a practical grip recess for reliable, repeatable measuring — order this item directly via Metav Werkzeuge or consult our specialists for purchase advice. TECWERK 1000 mm Aluminium Ruler with Laser‑engraved Scale and 50 x 5 mm Profile TECWERK 1000 mm aluminium ruler designed for workshop and industrial measurement tasks, featuring a laser‑engraved millimetre scale and a sturdy 50 x 5 mm cross‑section for reduced flex. *Laser-engraved millimetre scale *Solid aluminium, silver anodised finish *50 x 5 mm rigid cross-section *Integrated grip recess for secure handling Accurate measurements that speed up production The laser‑engraved mm scale ensures legible, wear‑resistant markings that remain precise over time, supporting repeatable measurement routines on the shop floor. The durable marking process avoids the need for frequent re‑calibration of visual aids, which translates into measurable time savings during setup and quality checks. For light assembly, layout work and routine inspection tasks, the solid aluminium construction provides a dependable baseline for accurate linear measurement. Robust profile for consistent handling and reduced error A 50 x 5 mm cross‑section considerably reduces bending compared with thinner straightedges, delivering a stable reference on long spans. The integrated grip recess improves handling and alignment when measuring along edges or across components, helping to keep the straightedge steady and reducing the risk of parallax errors. This combination of rigidity and ergonomic detail supports consistent results in repetitive tasks and small‑batch production. Low‑maintenance finish and everyday durability The silver anodised surface gives corrosion resistance and a smooth feel while keeping the weight low for comfortable use across shifts. Because the scale is laser‑engraved into the metal rather than printed, markings resist abrasion and solvent contact typical in workshops. The unit’s aluminium composition balances durability with manoeuvrability, making it suitable for frequent handling without adding unnecessary mass to the workbench. For reliable measuring tools from TECWERK and purchasing advice tailored to workshop needs, contact Metav Werkzeuge — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss suitability and availability Technical data Article number: 2000858738NW Label: Lineal L.1000mm Alu.m.Griffmulde Q.50x5mm TECWERK Product type: Ruler Manufacturer: TECWERK UID: 2000858738NW Facts Length: 1,000 mm Cross-section: 50 x 5 mm Packaging unit: 1 Special features Laser-engraved millimetre scale Solid aluminium construction Silver anodised finish With grip recess mm scaling FAQ What length is the ruler and which scale does it use? The ruler is 1,000 mm long and features a laser‑engraved mm scale, offering clear millimetre graduations for workshop measuring tasks. Is the straightedge resistant to wear from solvents or oil? Yes, the laser‑engraved markings on the TECWERK aluminium ruler are highly resistant to abrasion and most workshop contaminants, and the anodised surface enhances corrosion resistance. Can this ruler be used as a stable reference over long spans? The 50 x 5 mm cross‑section provides increased rigidity compared with thinner profiles, making it a suitable stable reference for many layout and inspection applications. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1000mm Steel Rule Gauge 50 x 10 mm GG1 Accuracy, Precision Ground - TECWERK
Data conflict: the product label lists "H.PREISSER" while the manufacturer field is "TECWERK" — please verify which is correct (SKU 4000858823NW); it is essential to ensure accuracy in product information to avoid potential confusion or errors in inventory management, customer orders, or supplier records, as discrepancies like this can lead to misunderstandings or logistical issues; double-checking the source of the information, such as invoices, supplier documentation, or product packaging, may help clarify the correct manufacturer; if necessary, contact the supplier or manufacturer directly to confirm the details and update the records accordingly to maintain consistency and reliability in the database.
1000mm Steel Scale Flexible Stainless Spring Steel Graduated 1mm/0.5mm - TECWERK
Take advantage of a durable, laser-etched scale and a flexible stainless spring strip construction for reliable shop measurements and fast marking tasks; order the item directly via Metav Werkzeuge or ask our consultants for tailored advice. Steel Scale L1000 mm (stainless, flexible) by TECWERK The Steel Scale L1000 mm is a flexible stainless steel measuring scale designed for workshop layout, inspection and repeatable measuring tasks with clear mm and 0.5 mm divisions *Laser-etched scale for long-lasting legibility *Flexible stainless spring strip construction *Clear mm and 0.5 mm divisions for precise marking *Slim 18 x 0.5 mm profile fits tight measuring gaps Accurate metre-range marking for efficient shop work The full-length 1,000 mm format offers an immediate reference for long measurements, while the dual division (standard mm and 0.5 mm) supports precise layout and scribing operations. The laser-etched graduations resist abrasion and remain readable under frequent use, reducing measurement errors and downstream rework. For workshop environments, the combination of metre-range coverage and fine half-millimetre increments improves process reliability and shortens setup times by enabling faster, repeatable measurements. Flexible profile for measurement in confined or curved areas Engineered from stainless spring strip steel, the slim 18 x 0.5 mm cross-section provides both flexibility and resilience: the scale conforms to slightly curved surfaces without kinking and springs back to shape for repeated use. The stainless composition ensures corrosion resistance in humid or oily workshop conditions, extending service life compared with plain carbon rulers. This flexible design is particularly useful for pattern making, sheet-metal layout and any application where a rigid rule cannot reach. Workshop-ready specification and traceable handling The scale is supplied as a single unit, designed for integration into routine inspection or layout workflows and marked as inspection required, ensuring traceability in quality-controlled environments. The robust marking method and spring-steel base make the instrument suited to daily industrial use, while the slim geometry minimises obstruction on jigs and fixtures. If supplementary technical data or compliance details are required, Metav Werkzeuge provides direct support at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Contact Metav Werkzeuge today to discuss the TECWERK steel scale L1000 mm and receive expert ordering guidance from our Emmerich team Technical Data Article number: 2000858764NW Product type: Steel scale Brand: TECWERK Packaging unit: 1 Core measurements Length: 1,000 mm Cross-section: 18 x 0.5 mm Division: mm / 0.5 mm Materials & special features Material: stainless spring strip steel Scale: laser-etched Flexible design Inspection required FAQ What level of marking precision does this scale provide? The metal ruler offers clear millimetre graduations and 0.5 mm subdivisions; the Steel Scale L1000 mm (TECWERK, SKU 2000858764NW) enables precise layout and scribing where half-millimetre resolution is sufficient. Is the scale suitable for use in humid or oily workshops? Yes. The scale is made from stainless spring strip steel, which provides corrosion resistance and mechanical resilience suitable for typical workshop atmospheres. Can the scale be used on curved or irregular surfaces? The flexible construction permits measurement and marking on gently curved surfaces; the slim 18 x 0.5 mm profile helps access narrow gaps and conforms without permanent deformation. Will the graduations remain legible after heavy use? Graduations are laser-etched for durable legibility, reducing the need for early replacement and helping to maintain consistent measurement quality. Is this scale ready for inspection tasks in a quality-controlled environment? The product is marked as inspection required and is designed for routine workshop and inspection applications where traceability and repeatable measurements are important. Manufacturer/Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
1000mm Steel Scale Flexible Stainless Steel 30 x 1 0.5mm Division - TECWERK
Compact, flexible and traceable: the combination of a laser-etched metric graduation, stainless spring steel construction and a resilient 1000 mm length ensures reliable workshop measurement and long service life. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Stainless flexible steel scale L 1000 mm (TECWERK) — laser-etched, mm/½ mm graduation Stainless flexible steel scale L 1000 mm for clear metric measurement in workshops and metrology applications, designed as a flexible spring-steel strip for handling curved surfaces and tight spaces Laser-etched metric graduation Flexible stainless spring steel 1000 mm length, 30 x 1 mm cross-section Inspection required for traceability Precise graduations that speed up measurement routines The laser-etched graduation offers permanent, high-contrast markings that remain legible under regular workshop stresses. With a graduation given as mm and ½ mm, measurements can be taken quickly and compared directly to drawings or machine settings, reducing transfer errors and downtime. The scale is intended for use where repeatable, verifiable linear measurement is required in production or inspection routines, supporting efficient workflows and clearer process documentation. Robust material and compact cross-section for daily use Manufactured from stainless spring steel, the strip resists corrosion while retaining springy flexibility; this material choice combines durability with the ability to conform to slightly curved surfaces without permanent deformation. The 30 x 1 mm cross-section balances stiffness and handling comfort, so the scale sits flat for accurate reading yet remains easy to manoeuvre. The stainless construction is particularly suitable where moderate humidity or incidental coolant contact occurs. Traceability and conformity for professional environments The product is marked as inspection required, meaning each unit is documented for quality and traceability during delivery. This status supports internal quality systems and audits by providing a traceable item history. Where records and accountability are part of the procurement specification, the traceable nature of this scale simplifies acceptance checks and reduces administrative effort when integrating measuring tools into standard operating procedures. Practical handling, storage and typical applications The flexible strip format suits tasks such as checking lengths on assembly benches, marking sheet edges or using as a temporary reference in jigs. The flexibility allows temporary use on slightly convex or concave surfaces without loss of contact, while the compact dimensions facilitate storage in tool drawers or measurement kits. Regular visual inspection and correct storage prevent surface damage; if preserved as supplied, the scale maintains its accuracy and legibility over extended periods. Contact Metav Werkzeuge for a tailored recommendation and availability check for this flexible 1000 mm stainless steel scale; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application suitability and delivery from Emmerich. Technical data Article number: 4000858768NW SKU: 4000858768NW Product type: Steel scale Label: Stahlmaßstab L.1000mm rostfr.Stahl biegsam Teilung B=mm/1/2mm H.PREISSER Facts Length: 1000 mm Cross-section: 30 x 1 mm Graduation: mm / 1/2 mm Pack unit: 1 Special features Material: stainless spring steel Scale: laser-etched Flexible execution Inspection required: yes FAQ What graduations does the scale show? The scale features a mm and ½ mm graduation, as supplied with the stainless flexible steel scale (SKU 4000858768NW), allowing precise readings to half-millimetre increments. Is this scale suitable for use on slightly curved surfaces? Yes, the flexible stainless spring steel construction allows temporary bending to follow slight curves while maintaining contact for measurement. How is traceability handled for this item? The unit is marked as inspection required; traceability documentation is supplied in line with the inspection requirement for the steel scale (4000858768NW). Can the scale withstand occasional exposure to coolants or humid environments? Constructed from stainless spring steel, the scale resists corrosion from incidental exposure, though prolonged immersion should be avoided. What workshop tasks is this scale best suited for? Typical uses include quick length checks on assembly benches, marking and alignment tasks where a resilient, laser-etched reference is needed; the flexible strip design is especially helpful for non-flat workpieces. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1000mm Steel Scale Flexible Stainless Steel Division A = mm/mm, 30 x 1 Cross-Section - TECWERK
Benefit from a laser-engraved millimetre scale, a flexible stainless spring-steel construction and a compact 30 x 1 mm cross-section for precise measurement on straight and curved surfaces. Order the measuring strip directly via Metav Werkzeuge or request technical advice from our consultants for integration and inspection documentation. Steel scale L 1000 mm — flexible, laser-engraved stainless spring steel (TECWERK) A Steel scale L 1000 mm is designed for precise linear measurement in metalworking and inspection tasks, featuring millimetre division (A = mm/mm) and a bendable strip profile for use on curved components. Laser-engraved millimetre scale Flexible stainless spring steel Cross-section 30 x 1 mm Inspection-required delivery Precision measuring in confined and curved areas The laser-engraved millimetre divisions ensure consistently legible graduations across the full 1,000 mm length, reducing reading errors in production and quality control. As the scale is manufactured from stainless spring steel, the measuring graduations remain durable even under frequent flexing. Laser engraving penetrates the surface rather than relying on surface print, which means the markings retain contrast and dimensional accuracy over time. The slim 30 x 1 mm profile allows the strip to follow contours or fit into narrow measuring fixtures while maintaining a stable reference line for comparative or direct measurement tasks. Robust construction for industrial workflows Constructed from stainless spring steel, the strip combines corrosion resistance with elastic form stability for repeated use in workshop and inspection environments. The flexible design does not compromise dimensional stability: after bending, the strip returns to shape within its elastic limits, preserving the precision of the graduations. The item is supplied as inspection required, supporting traceability and suitability for calibrated measurement chains. This characteristic simplifies integration into documented quality systems where proof of conformity and testability are essential. Practical integration and efficiency benefits The flat, bendable format is particularly suitable for transfer measurements, template creation and retrofitting onto bespoke gauges. The low profile and laser-etched scale enable fast alignment and clear visual checks without additional overlays or protective covers. For production operations, employing a resilient measuring strip reduces setup time and lowers the need for multiple rigid gauges, supporting a more efficient tool inventory. Where repeat measurements on irregular parts are needed, the strip provides a reliable, long-term reference that supports consistent process control. Contact Metav Werkzeuge for tailored advice on the TECWERK flexible steel scale L 1000 mm and to arrange delivery or inspection documentation from our Emmerich site — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 4000858765NW SKU: 4000858765NW Product type: Steel scale Length: 1,000 mm Cross-section: 30 x 1 mm Packaging unit: 1 Facts Division: A = mm/mm Execution: flexible Inspection required: yes Materials & features Material: stainless spring strip steel Scale engraving: laser-engraved Flexible design for curved surfaces FAQ What materials is the steel scale suitable for measuring? The TECWERK steel scale L 1000 mm is a linear measuring reference and can be used across a wide range of workshop applications where a millimetre scale on a flexible strip is appropriate. Is the scale permanently marked or will the graduations wear off? Graduations on this measuring strip are laser-engraved, so the markings are durable and retain legibility far longer than surface-printed scales. Does the product come with calibration or inspection documentation? The item is supplied as an inspection-required product; specific inspection or calibration documentation can be provided on request to support quality-system requirements. Can the strip be used on curved workpieces without losing accuracy? The flexible stainless spring-steel construction allows the strip to conform to curved surfaces while maintaining the dimensional stability of the graduations for reliable comparative measurements. What is the exact cross-section and why is it important? The cross-section is 30 x 1 mm, which gives a low profile for use in narrow fixtures and allows the strip to follow contours while preserving a stable reference edge. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1000mm Workshop Straightedge 40 x 5 mm Ground High Edge Chamfered, Straightness 0.2-0.3 mm - TECWERK
Take advantage of the combination of 1,000 mm span, guaranteed straightness of 0.2–0.3 mm, and precision ground edges for consistent alignment tasks; order the workshop straightedge directly via Metav Werkzeuge or ask the consultants for detailed specifications. TECWERK Workshop Straightedge 1,000 mm – Steel, Straightness 0.2–0.3 mm A TECWERK Workshop Straightedge 1,000 mm is designed for precise alignment, inspection and setup tasks in metalworking and general workshop environments. 1,000 mm length for long-span checks Precision ground edges for accurate contact Straightness guaranteed 0.2–0.3 mm Finely polished, bevelled profile, cross-section 40×5 mm Accurate alignment for routine inspection and setup The straightedge is engineered to provide a reliable reference line for visual and tactile inspection tasks. With a declared straightness of 0.2–0.3 mm, the instrument enables consistent detection of warp and runout across long components, reducing setup time and improving process repeatability. The precision ground edges ensure true contact with measured surfaces, so flatness deviations are revealed rather than introduced. For workshops requiring dependable reference tools, this product supports efficient decision-making during machine alignment, part inspection and assembly preparation. Robust construction that reduces handling error Manufactured from steel and finished with a finely polished surface, the tool combines rigidity with a tactile surface that resists minor abrasion and marking during normal use. The rectangular cross-section 40 x 5 mm provides stiffness across the 1,000 mm span, limiting deflection in practical handling. A bevelled edge eliminates sharp burrs and facilitates gentle seating against irregular parts, while the high-edge grinding delivers a flat contact zone that is easier to reproduce in repeated measurements. These characteristics translate into fewer readjustments and a smoother workflow on the shop floor. Traceable inspection and fit for quality processes The device is marked as inspection required, which means it is suitable for workflows that demand traceability and accountability. Having a controlled straightness tolerance and a documented inspection regime supports quality control protocols and aids compliance with internal inspection plans. In contexts where a stable reference artefact is needed for routine checks or comparative measurement, the straightedge serves as a practical metrology aid that bridges bench-level checks and formal measurement processes. For additional verification data or certificates, technical enquiries can be directed to the supplier. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to arrange supply, request inspection details for the TECWERK workshop straightedge, or discuss suitable measurement solutions for the workshop bench Technical Data Article number: 2000858742NW Product: Workshop straightedge Brand: TECWERK Length: 1,000 mm Core technical data Cross-section: 40 x 5 mm Straightness: 0.2–0.3 mm Packaging unit: 1 Special features Bevelled edge Precision ground edges Finely polished finish Inspection required FAQ What materials is the straightedge suitable for checking? The TECWERK workshop straightedge is intended as a dimensional reference for general workshop inspection and is made of steel for stable performance on metallic parts. Is the straightness tolerance documented for quality records? Yes, the straightness of the TECWERK workshop straightedge is specified as 0.2–0.3 mm and the product is listed as inspection required to support traceability. How does the cross-section affect performance? The 40 x 5 mm cross-section increases stiffness over the 1,000 mm span, minimising deflection during handling and improving repeatability in alignment checks. Can this straightedge be used for machine setup and alignment? The tool is suitable as a bench-level reference for alignment and setup tasks where a reliable visual and tactile datum is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
100mm Hairline Ruler Hardened Stainless Steel Lapped Measuring Edges Matte Finish - TECWERK
Take advantage of a compact measuring tool that combines hardened stainless steel, lapped measuring edges and a matt, non-glare finish for reliable scribing and inspection work; order directly via Metav Werkzeuge or consult our specialists for verification and traceability options. TECWERK hairline gauge DIN 874/00 — 100 mm, hardened stainless steel, 23 x 5 mm The TECWERK hairline gauge is a compact precision straightedge designed for fine alignment, scribing and visual inspection tasks in workshops and metrology labs. Hardened and ground stainless steel Lapped measuring edges for accuracy Matt, non-glare surface finish Hand-warmth protection for stable readings Measure reliably with lapped edges and standard conformity The instrument provides consistent precision by combining a hardened and ground blade with lapped measuring edges, reducing edge-related deviations during scribing or alignment tasks. Conformance to DIN 874/00 ensures compatibility with common inspection routines and enables straightforward integration into quality control procedures. The 100 mm length and narrow profile facilitate use where space is restricted, while the robust construction reduces the need for frequent recalibration, so inspection cycles remain predictable. Stable readings in everyday workshop conditions Constructed from stainless steel with a cross-section of 23 x 5 mm, the tool resists bending and thermal distortion. A hand-warmth protection feature helps to limit heat transfer from the operator, supporting repeatable measurements over time. The matt, non-glare finish minimises reflection under workshop lighting, improving visual contrast against scribed lines and engraved marks. Together, these properties translate into faster measurement routines and fewer reworks during production or maintenance tasks. Simple verification and long-term usability Marked as inspection required, the device supports documented verification within regulated processes; traceable checks can be scheduled to coincide with routine quality audits. The compact format and durable surface treatment make the gauge a low-maintenance choice for frequent use, while the clear, standard dimensions allow it to be paired with existing fixtures and gauges in the workshop. For spec-sensitive tasks, the instrument offers a dependable baseline measurement that helps to maintain throughput without compromising accuracy. Discuss verification options and delivery timelines with Metav Werkzeuge; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to align the tool’s inspection status with production requirements Technical Data Article number: 2000858391NW Label: Haarlineal DIN 874/00 L.100mm Spezialstahl Q.23x5mm TECWERK Manufacturer: TECWERK Dimensions & core measurements Length: 100 mm Cross-section: 23 x 5 mm Packaging unit: 1 Materials & special features Material: stainless steel Hardened and ground Lapped measuring edges Hand-warmth protection Non-glare matt finish Inspection required FAQ What materials is the gauge suitable for? The hairline gauge is manufactured from stainless steel and is intended for marking and visual alignment rather than cutting; it is suitable for use on components that require non-deforming, repeatable scribing. How is accuracy ensured on this straightedge? Accuracy is achieved through a hardened and ground blade with lapped measuring edges, which reduce edge wear and help maintain a consistent reference line during repeated use. Is the gauge ready for use in regulated inspection processes? Yes, the device is marked as inspection required; it can be integrated into documented verification cycles and supplied with accompanying inspection records if requested. What advantage does the hand-warmth protection offer? The hand-warmth protection limits thermal transfer from the operator to the tool, stabilising measurements during extended use and improving repeatability in workshop conditions. Can this tool be used under strong workshop lighting? The matt, non-glare finish reduces reflections and makes the reference edge easier to read under bright lighting, enhancing visibility for precise scribing and inspection. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
100x70 mm Centre Square Aluminium, Black Anodised - Metav IndustryLine
Taking advantage of a hardened aluminium alloy body and a black anodised finish, this centring tool combines low weight and robust resistance for repeatable marking and alignment in everyday workshop tasks; order the centre square directly via Metav Werkzeuge or consult our specialists for application advice. Centre Square AL 100 x 70 mm – Aluminium centring square, black anodised (Metav IndustryLine) The Centre Square AL 100 x 70 mm is a compact aluminium centring square designed for precise marking and alignment of shafts and components in metalworking and workshop layout tasks. Hardened aluminium alloy construction Black anodised finish for low glare Compact 100 x 70 mm format Suitable for centring shafts up to Ø90 mm Durable marking that keeps setups consistent The compact angle plate is manufactured from a hardened aluminium alloy, providing a favourable stiffness‑to‑weight ratio that supports repeatable setups without the fatigue of heavier steel tools. The black anodised finish reduces surface reflections during layout and offers a basic corrosion barrier, which helps maintain visible reference edges over time. At approximately 0.2 kg, the tool is easy to handle and manoeuvre on benches and fixtures, which shortens positioning time and reduces the risk of slip during scribing or centring operations. These features result in fewer setup errors and a more efficient marking workflow. Compact dimensions that speed up routine work With an overall footprint of 100 x 70 mm, the design balances reach and accessibility for common workshop components. The short face is suitable for tight fixtures while the longer face offers stable bearing during alignment; this format is particularly practical when working on mid‑sized shafts and assemblies. The tool is specified as suitable for centring on shafts up to Ø90 mm, making it a reliable reference for turning preparations, punch layout and quick dimensional checks. Its compactness supports rapid clamping or holding and makes the tool convenient to keep at the bench for frequent use. Built for the workshop — simple care and wide applicability The centring square is made for routine layout and alignment tasks across machining and fabrication shops. The dark anodised surface simplifies visual contrast with scribe lines, while the aluminium construction reduces the risk of marking delicate surfaces. Cleaning requires only a light wipe with a lint‑free cloth and a mild solvent if necessary; avoid abrasive cleaners to preserve the anodised layer. As part of the Metav IndustryLine range, this tool benefits from the supplier’s quality filter in Emmerich, which supports consistent product standards for professional users and trade buyers. For reliable centring and faster layout workflows, contact Metav Werkzeuge in Emmerich for technical advice or to request the Metav IndustryLine Centre Square AL 100 x 70 mm (SKU M214.170.AL) and guidance on suitable applications. Technical data Article number: M214.170.AL GTIN: 4054469164472 Tariff number: 90172039 Weight: 0.2 kg Measurements Size: 100 x 70 mm Suitable for shaft centring: Ø90 mm Net weight: 0.2 kg Features Material: hardened aluminium alloy Surface: black anodised finish Category: marking and layout tool Use case: centring, scribing and alignment FAQ What is this tool best used for? The centre square is intended for marking, centring and alignment tasks in metalworking and fabrication; the Metav IndustryLine Centre Square AL 100 x 70 mm (SKU M214.170.AL) is suited to layout work and preparatory alignment of shafts and housings. Can this square be used on round shafts? Yes — the tool is specified as suitable for centring shafts up to Ø90 mm and provides stable reference faces for scribing and setup. How should the finish be maintained? Wipe the black anodised surface with a lint‑free cloth and a mild solvent if needed; avoid abrasive pads to preserve the anodised layer and the clarity of scribe lines. Is the material suitable for everyday workshop handling? The hardened aluminium alloy offers a good compromise between stiffness and low weight for routine use, and the Metav IndustryLine quality control ensures consistent production standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Pin Punch CV Steel, 10mm Diameter, 3mm Tip - Metav IndustryLine
Combining chromium‑vanadium steel construction with compact 120 × 10 × 3 mm dimensions, these marking punches provide reliable, repeatable scribing with a long service life. Benefit from a robust tool that supports efficient workshop marking; order the M214.030 marking punches directly via Metav Werkzeuge or consult our advisors for production quantities and delivery details. Marking punches M214.030 — 120 × 10 × 3 mm, chromium‑vanadium steel (Metav IndustryLine) The Marking punches M214.030 are hardened punch blanks designed for precise scribing and centre‑marking in metalworking and fabrication environments. Chromium‑vanadium steel construction Precise 120 × 10 × 3 mm dimensions Designed for durable workshop marking Consistent marks and extended lifetime for production use The M214.030 marking punches are manufactured from chromium‑vanadium steel, a material known for its balance of toughness and wear resistance. This composition reduces the risk of chipping under repeated impact and maintains a predictable edge for longer, which translates into fewer reworks and steady process output. The combination of material and compact cross‑section keeps marking precision stable throughout repetitive use, making these blanks suited to routine layout tasks in a production setting. Compact dimensions that aid handling and repeatability With clear 120 × 10 × 3 mm measurements, the punches are dimensioned for comfortable handling while offering sufficient contact area for reliable strikes. The slim profile helps to localise force on the scribe point so marks remain crisp without excessive deformation of the tool. This geometry supports quick alignment in jigs and fixtures and contributes to efficient workshop workflows by reducing setup time and improving repeatability of layout marks. Practical applications and workshop compatibility These punch blanks serve as a straightforward solution for scribing, centre‑marking and pre‑drilling indications across general metalworking and fabrication tasks. Supplied as a simple, no‑nonsense tool blank, they integrate easily into standard marking tool assortments and can be finished or ground to match specific tip geometries if required. The robust build supports daily use on the shop floor and aligns with Metav IndustryLine’s aim to make precision tools accessible and dependable for industry customers. Contact Metav Werkzeuge for quantity options, delivery lead times and advice on integrating the M214.030 marking punches into existing tool assortments; Metav Werkzeuge ships from Emmerich with expert guidance and reliable supply Technical data Article number: M214.030 GTIN: 4054469163949 Customs tariff number: 90172039 Weight: 0.1 kg Dimensions & material Length: 120 mm Cross‑section: 10 × 3 mm Material: Chromium‑vanadium steel Applications & features Category: marking tools Intended use: scribing and centre‑marking Robust CrV construction for repeated impact FAQ What are the exact dimensions of the punches? The M214.030 marking punches measure 120 × 10 × 3 mm, as stated in the technical data for the Metav IndustryLine marking punches. Which material is used for these marking punches? These marking punches are made from chromium‑vanadium steel, selected for its toughness and wear resistance in regular workshop marking tasks. Can the blanks be ground to a specific tip geometry? Yes, the M214.030 punch blanks can be ground to a desired tip profile to suit particular marking requirements while preserving core material properties. Are these punches suitable for repeated use on a production line? The chromium‑vanadium construction and compact geometry of the M214.030 make them well suited to repetitive marking operations typical in production and fabrication environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Punch Hammer With CV Steel Head And Rubber Handle - Metav IndustryLine
Take advantage of a compact, robust marking tool that combines a chrome‑vanadium steel tip with an ergonomic rubber handle for precise scribing and repeatable centre marks; the 120 mm length ensures reach without loss of control. Order directly via Metav Werkzeuge or consult the Metav advisors for application guidance. Marking punch M214.030.H – 120 × 10 × 3 mm marking punch with chrome‑vanadium tip and rubber handle (Metav IndustryLine) Marking punch M214.030.H is a compact workshop marking tool for accurate scribing, centre punching and layout work in metal and general workshop use. Chrome‑vanadium steel tip for wear resistance Ergonomic rubber handle for secure grip Compact 120 mm length for tight spaces Precise 10 × 3 mm section for defined marks Accurate layout and repeatable marks for production work The 120 mm overall length and the slender 10 × 3 mm section make this marking punch ideal where access is limited but precise layout is required. The hardened chrome‑vanadium tip delivers a defined point that holds its edge under repeated impact, supporting consistent scribing and centre marking on ferrous and non‑ferrous materials. In practical terms, this means fewer re‑marks and quicker set‑ups on the shop floor, improving throughput when laying out multiple identical parts. Ergonomics that reduce operator fatigue and increase control An ergonomic rubber handle provides a secure grip and dampens impact vibration, which helps maintain a steady hand during repetitive layout tasks. The modest mass of the tool (approx. 0.10 kg) keeps it manoeuvrable for detailed work while still offering enough inertia for reliable impact transfer. For technicians and fitters who perform frequent marking, the combination of tactile grip and balanced weight reduces slips and improves mark placement, so fewer corrective operations are necessary. Durable construction for everyday workshop environments Constructed with a hardened chrome‑vanadium steel striking end and a resilient grip, the tool resists deformation and wear typical in busy workshops. The robust metal tip tolerates standard hand‑hammer strikes and preserves a sharp marking point over long service intervals, reducing maintenance downtime. This durability translates into dependable performance across routine metalworking tasks, from layout to light centre‑punching, making the tool a practical addition to a machinist’s or maintenance kit. Practical handling, storage and application notes The compact dimensions make the punch easy to store in a tool drawer or pouch and quick to retrieve for ad‑hoc measurements and layout work. Its geometry suits marking on sheet edges, bolt circles and small components where larger punches would be cumbersome. For best results, use a firm, centred strike; the durable tip will maintain accuracy, and the rubber handle supports repeatable hand positioning for series work. The marking punch is categorised for general workshop marking tasks and integrates well with standard layout procedures. For reliable workshop marking and a durable shop tool, contact Metav Werkzeuge to discuss the Metav IndustryLine marking punch M214.030.H and request application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M214.030.H ECLASS: 21022304 Manufacturer: Metav IndustryLine Overall length: 120 mm Cross-section: 10 × 3 mm Weight: 0.10 kg Material: Chrome‑vanadium steel tip; rubber handle Category: Marking tools (Anreisszeuge) Intended use: Scribing, centre marking, layout FAQ What materials can be marked with this punch? The marking punch M214.030.H is designed for workshop marking on a variety of materials; the chrome‑vanadium tip is suitable for common steels and non‑ferrous metals used in layout tasks. Is the handle comfortable for repeated use? Yes, the rubber handle provides an ergonomic grip that dampens impact and improves control during repetitive marking operations. How compact is the tool for tight spaces? With an overall length of 120 mm and a slim 10 × 3 mm section, the tool is compact enough for confined areas while retaining stable handling. Does the tip resist wear under regular use? The hardened chrome‑vanadium tip is manufactured for durability and maintains a defined marking point through regular workshop striking. Which Metav series covers this product? This item is part of the Metav IndustryLine range and is supplied under article number M214.030.H. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Precision Ruler Hardened Stainless Steel Lapped Measuring Edges Matt Finish - TECWERK
Take advantage of the combination of hardened stainless steel construction, lapped measuring edges and integrated hand-heat protection for stable, repeatable readings in workshop and inspection environments; order the item directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Haarlineal DIN 874/00 L.125 mm — Hardened stainless steel, lapped edges The TECWERK Haarlineal DIN 874/00 L.125 mm is designed for fine linear measurement and layout work in metrology benches and precision workshops Hardened, ground stainless steel Lapped measuring edges for high accuracy Hand-heat protection for consistent readings Non-glare matt finish, inspection required Consistent precision from robust materials Constructed from stainless steel and delivered in a hardened and ground condition, this hairline gauge complies with DIN 874/00 tolerances and is intended for repeatable linear measurement tasks. The combination of a stable material and thermal shielding minimises dimensional drift during handheld use; the result is improved repeatability when transferring marks or checking small distances. The specification that the measuring faces are lapped ensures exceptionally flat contact surfaces and reduces uncertainty introduced by surface irregularities, making the instrument suitable for use on inspection tables and in toolrooms where traceable results are required. Designed for practical workshop use and clear reading The matt, non-glare surface finish reduces reflections under shop lighting, while the incorporated hand-heat protection limits measurement error from body warmth during routine handling. These practical features translate into fewer re-measurements and more efficient workflows in production support and assembly operations. As an industrial measuring implement, the device is intended for tasks such as layout marking, comparative checks and transfer measurements; its DIN conformity supports integration into quality-control procedures where documented accuracy is required. Certified inspection and long-term reliability This hairline rule is marked as subject to inspection, which emphasises its role in quality-assured measuring processes. The inspection requirement confirms that tolerance and flatness checks have been performed or must be performed, supporting traceability in calibrated environments. With a compact cross-section and a robust finish, the instrument is optimised for everyday handling without sacrificing the precision expected from metrology equipment. Where longevity and consistent performance are priorities, the hardened and lapped construction reduces wear and preserves measuring accuracy over time. Contact Metav Werkzeuge today for inspection-certified delivery of the TECWERK hairline rule and for tailored technical guidance – info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 2000858392NW UID: 2000858392NW Product type: Haarlineal Brand: TECWERK Facts Standard: DIN 874/00 Length: 125 mm Cross-section: 23 x 5 mm Packaging unit: 1 Inspection required: yes Special features Material: stainless steel Hardened and ground Measuring edges lapped Hand-heat protection Non-glare matt finish FAQ What tolerance class does this hairline rule meet? The TECWERK Haarlineal is produced to DIN 874/00 standard; the unit is supplied in a hardened and ground condition with lapped measuring edges and is subject to inspection as indicated in the product data. Is the rule suitable for workshop layout as well as inspection work? Yes, the combination of a matt, non-glare finish, hand-heat protection and a hardened substrate makes the gauge appropriate for both layout work on the shopfloor and precision checks in an inspection area. How does the hand-heat protection benefit measurements? Hand-heat protection reduces thermal transfer from the operator to the measuring faces, helping the gauge to maintain stable readings during repeated handheld measurements. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
149mm Carbide Scriber Replaceable Tip Knurled Grip Clip-Top - TECWERK
Take advantage of a robust workshop tool that pairs tungsten carbide tip hardness with a sturdy metal body and a practical clip for secure handling; the replaceable and resharpenable tip extends service life and reduces downtime. Order the TECWERK tool directly via Metav Werkzeuge or consult our specialists if further technical details are required. Tungsten Carbide Scribe Needle L 149 mm »TECWERK« – replaceable carbide tip, metal body A robust Tungsten Carbide Scribe Needle for precise contour marking and durable workshop use on hardened materials up to HRC 60. Replaceable and resharpenable carbide tip Contour-sharp marking up to HRC 60 Stable metal body with clip Knurled grip for reliable pressure transfer Precise marking on hard materials that speeds up set-up The needle’s tungsten carbide tip creates consistently precise marks even on hard workpieces, enabling fast layout and reduced rework. With the ability to scribe contours on materials up to HRC 60, the tool supports demanding metalworking tasks where accuracy is essential. By converting a reliable line into repeatable positioning data, the scribe needle helps shorten measurement and alignment phases, which improves throughput without compromising accuracy. Robust design for everyday workshop handling A durable metal body combined with a secure clip and knurled grip makes the device comfortable to use and simple to keep on hand. The 149 mm length gives practical reach and control for a wide range of marking tasks while remaining compact in a pocket or tool roll. Built for frequent use in repair shops and production benches, the construction minimises tool failure and ensures consistent performance under real workshop conditions. Serviceable tip reduces cost and environmental impact The tool’s replaceable and resharpenable tip turns a single handle into a long-term asset: worn points can be renewed rather than replacing the whole instrument being replaced, reducing total cost of ownership and waste. This maintenance-friendly approach keeps marking quality high and supports continuous operation. For complex requirements or alternative tip geometries, consult available technical notes to confirm compatibility and best practices. Contact Metav Werkzeuge today for precise workshop marking solutions — request the TECWERK tungsten carbide scribe needle or speak with our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000858512NW Name: Tungsten carbide scribe needle L 149 mm Manufacturer: TECWERK Product type: Scribe needle Material: Tungsten carbide Packaging unit: 1 Facts Length: 149 mm Marking capability: up to HRC 60 Special features Stable metal construction with clip Knurled surface for improved grip and pressure transfer Tip retractable, resharpenable and replaceable Contour-sharp scribing on hard materials Designed for workshop use FAQ What materials can this scribe needle mark effectively? The TECWERK scribe needle marks reliably on a wide range of metals and is specified for contour scribing up to HRC 60, making it suitable for hardened steels and other tough materials. Is the tip interchangeable and can it be resharpened? Yes — the needle features a replaceable and resharpenable carbide tip so the handle remains usable over many service cycles. How long is the instrument and how does that affect handling? The tool measures 149 mm, offering a balance between compact storage and comfortable reach for typical workshop marking tasks. Does the design support shop use and portability? The stable metal body, secure clip and knurled grip are tailored for everyday workshop use and convenient carrying on a bench or in a pocket. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150 mm Scriber With Carbide Tip, Robust Handle - Metav IndustryLine
Combining a solid carbide tip with a robust hand grip and a compact 150 mm profile delivers precise, long-lasting scribing for routine workshop layout tasks; order directly via Metav Werkzeuge or consult the technical team for application advice. Heavy-Duty Scriber with Solid Carbide Tip (M214.036) — Metav IndustryLine The Heavy-Duty Scriber with Solid Carbide Tip (M214.036) is a workshop marking tool designed for repeatable layout and scribing work across general fabrication and maintenance tasks. Solid carbide tip for long wear 150 mm length for workshop marking Robust ergonomic handle for forceful use Lightweight: 0.1 kg for easy handling Durable marking for demanding workshop tasks Designed for consistent layout lines in busy workshop environments, the scriber combines a solid carbide tip with a compact geometry to maintain marking accuracy over time. The carbide point is wear-resistant and preserves its geometry under repeated use, reducing the need for frequent tip changes and supporting uninterrupted production runs. This endurance translates into fewer interruptions and more predictable results when transferring centre lines, reference marks or scribe lines for subsequent machining or assembly. Ergonomic grip for controlled, forceful marking An engineered robust handle transmits force efficiently to the tip, enabling deliberate marking where visibility and line depth matter. The 150 mm overall length strikes a balance between reach and control, offering comfortable handling for one-handed operation without sacrificing manoeuvrability. The tool’s light construction reduces operator fatigue during repetitive tasks while still allowing confident pressure transfer for clear, visible scribe lines. Reliable workshop partner that supports uptime The straightforward design requires minimal upkeep: occasional cleaning and inspection keep the tool serviceable for long periods. As part of the Metav IndustryLine, this scriber benefits from the brand’s quality filtering and reliable logistics, contributing to steady workshop supply and dependable availability. The combination of durability and simple maintenance helps to lower operating costs and streamline daily marking routines. Choose the Metav IndustryLine scriber with a solid carbide tip for dependable workshop marking and contact Metav Werkzeuge for ordering and technical advice Technical Data Article number: M214.036 GTIN: 4054469106342 Manufacturer: Metav IndustryLine Tariff code: 90172039 Specifications Length: 150 mm Weight: 0.1 kg Features Solid carbide tip Robust hand grip Category: Marking tools / scribing Lightweight construction FAQ What material is the tip made from? The Heavy-Duty Scriber (M214.036) is fitted with a solid carbide tip, chosen for its abrasion resistance and long service life. What is the overall length of the tool? The tool has an overall length of 150 mm, providing a good compromise between reach and control for workshop marking tasks. Is the scriber suited for repetitive layout work? Yes — the durable carbide tip and robust handle of the Metav IndustryLine scriber support repeated marking operations while reducing the need for frequent replacements. How is the product identified for ordering? Reference the article number M214.036 or the GTIN 4054469106342 when enquiring about the scriber Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Scriber With Cemented Carbide Tip Short Point - Metav IndustryLine
Take advantage of a carbide-tipped scribing tool that combines enduring point life and precise control in a compact form; the short, sharply ground tip and 150 mm overall length enable exact layout lines while remaining easy to handle. Order the tool directly via Metav Werkzeuge or consult the product specialists for application advice. Carbide-tipped Scriber M214.033.K — precision marking tool, short point The Carbide-tipped Scriber M214.033.K is a compact marking instrument designed for fine layout and scribing tasks in workshops and production environments, offering a short point for detailed work and a sturdy carbide tip for long-lasting sharpness. Carbide tip for lasting sharpness 150 mm overall length for controlled handling Short point for fine, precise marking Lightweight 40 g for easy manoeuvring Precision marking with a durable carbide tip The compact layout pin is built around a carbide tip that retains a sharp edge far longer than common steel points, making it suitable for repetitive marking cycles where consistent line clarity matters. The short, finely ground point produces clear, narrow scribe lines for layout control; this improves subsequent machining or joining accuracy by helping to define exact edges and reference lines. The tool’s lightweight nature at approximately 40 g reduces hand fatigue during repeated use and supports steady handling in confined workspaces. Handling and design that support accurate work With an overall length of 150 mm, the instrument balances reach and control: the size is long enough to reach across small assemblies yet compact enough for precise finger-guided work. The short-point geometry minimises lateral play and concentrates force at the contact point, which helps produce consistent markings with minimal tip deflection. The robust construction around the carbide tip offers dependable performance in day-to-day layout routines, supporting swift, repeatable marking without frequent resharpening. Practical workshop use and maintenance The tool is intended as a straightforward layout aid for marking and scribing operations; regular cleaning of the tip and protection from corrosive environments will preserve performance and service life. The carbide tip requires little maintenance compared with softer materials, but careful storage prevents accidental point damage. The compact format and durable tip make the instrument a practical addition to toolkits where reliable, repeatable markings are a prerequisite for downstream machining or assembly tasks. For dependable, long-lasting layout performance select the Metav IndustryLine carbide-tipped scriber M214.033.K and contact Metav Werkzeuge in Emmerich for availability and advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.033.K GTIN: 4054469106274 Customs tariff number: 90172039 Weight: 0.04 kg Overall length: 150 mm Facts Tip material: carbide Label: Carbide-tipped scribing needle, short point Category: Marking tools (Anreisszeuge) Special features Short, finely ground point Durable carbide tip for extended service life Compact format for precise layout work FAQ What is the tip material of the Carbide-tipped Scriber M214.033.K? The tip is made of carbide, providing long-lasting edge retention for consistent scribing performance. What is the overall length and weight of the tool? The scribing tool measures 150 mm overall and weighs about 40 g, offering a compact balance between reach and control. For which tasks is this marking tool intended? The instrument is intended for fine layout and scribing tasks in workshops and production settings, producing narrow, precise lines for machining and assembly preparation. How should the M214.033.K be maintained? Keep the carbide tip clean and dry, store the tool to avoid accidental tip damage, and handle it carefully to preserve the finely ground point. Is the M214.033.K suitable for repetitive, high-volume marking? Yes; the carbide tip’s durability supports repetitive marking cycles with reduced need for frequent maintenance, making it appropriate for routine workshop layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Ruler DIN 874/I Steel Precision Ground, Accuracy GG1 - TECWERK
Benefit from a combination of DIN 874/I accuracy, robust steel construction and finely ground edges for repeatable workshop measurement; order the ruler directly via Metav Werkzeuge or contact Metav’s advisors for specification checks. Ruler DIN 874/I L.1500 mm — Steel measuring bar with GG1 accuracy, TECWERK Ruler DIN 874/I L.1500 mm is a precision workshop measuring bar designed for layout, inspection and quality control tasks where a stable reference and certified accuracy are required. DIN 874/I accuracy class GG1 Fine-ground high edges and flat sides Cross-section 60 x 12 mm Length 1,500 mm Consistent measurement accuracy for production control The instrument meets DIN 874/I with accuracy class GG1, which ensures small tolerances for straightness and parallelism across the measuring edge. This classification means the bar is suitable as a reference for alignment and comparative measurement in component inspection. The GG1 rating implies an inspected and traceable geometry, reducing uncertainty in layout work and helping to maintain process capability on the shop floor without repeated corrective machining. Solid steel construction reduces flex and drift Manufactured from steel and finely ground on both the high edges and flat sides, the measuring bar offers a stable cross-section of 60 x 12 mm that resists bending under normal workshop loads. The fine grinding reduces surface irregularities that could affect contact with scribers, callipers or straightedges. As a consequence, the measuring bar provides a dependable, long-lasting reference that sustains dimensional integrity during daily use. Practical design for everyday workshop tasks The profile and finish permit straightforward use for marking, scribing and visual comparison. The finely machined edges provide a clear, repeatable datum for scribes and feeler gauges, while the flat sides ensure the bar sits securely on workbenches or machine beds. For longer lengths, a different profile is employed: from 2,000 mm a double T-shaped design with two hand slots is used, but this 1,500 mm variant retains a compact, easy-to-handle form factor suited to bench and machine-side applications. Inspection status and traceability for quality systems The product is noted as inspection required, indicating it is delivered with or intended for calibration and verification within regulated quality processes. That inspection status supports documented traceability for quality management systems and simplifies integration into ISO-driven inspection routines. A properly inspected measuring bar lowers the administrative effort associated with incoming inspection and accelerates commissioning into production. Availability and material options for operational needs The standard construction is steel, with a stainless execution stated as available short-term directly from factory stock for environments where corrosion resistance is necessary. The option of a corrosion-resistant variant helps extend service life in humid or chemically active workplaces and supports hygiene requirements in sensitive production areas. Paired with Metav’s distribution, reliable supply and documented quality checks make the instrument a pragmatic choice for workshop standardisation. For assured workshop precision and fast supply, contact Metav Werkzeuge to discuss the TECWERK steel ruler (sku 4000858824NW), check inspection documentation or arrange delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000858824NW UID: 4000858824NW Product type: Ruler Facts Length: 1,500 mm Cross-section: 60 x 12 mm Accuracy class: GG1 Special features Material: steel Fine-ground high edges and flat sides Inspection required Stainless version available short-term from factory stock Double T-shaped design and two hand slots from 2,000 mm FAQ What does DIN 874/I GG1 mean for workshop use? The DIN 874/I GG1 classification denotes strict straightness and parallelism tolerances; the ruler with this rating is suitable as a reliable reference for alignment and inspection tasks. Is the measuring bar supplied with calibration or inspection documentation? The product is listed as inspection required; documentation and verification records for the ruler can be provided to support quality-system traceability. Can the ruler be used in corrosive environments? A stainless execution is available short-term from factory stock, permitting use in humid or corrosive conditions where the steel standard would require extra protection. What is the cross-section and why does it matter? The cross-section is 60 x 12 mm, which balances rigidity and handling; the dimension reduces flex and helps maintain a stable reference under normal bench work. Is this ruler suitable for portable measurement on a machine bed? Yes; the fine-ground flat sides ensure stable seating on benches and machine beds, making the measuring bar suitable for portable layout and machine-side checks. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1500mm Steel Rule Flexible Stainless Steel Laser-Scaled A=mm/mm, 30x1 - TECWERK
Take advantage of a laser-etched, easy-to-read metric scale combined with a flexible stainless spring-steel construction and a slim 30 × 1 mm cross-section for reliable long-span measurements; order the item directly via Metav Werkzeuge or consult the technical team for application advice. TECWERK Flexible Stainless Steel Scale L 1,500 mm — laser-etched mm/mm division, flexible spring-steel rule The TECWERK Flexible Stainless Steel Scale L 1,500 mm is a flexible measuring rule designed for precise metric length checks over long spans in workshop and inspection environments. Laser-etched scale for lasting legibility Flexible stainless spring steel rule Length 1,500 mm for extended measurements Division A: mm/mm for precise metric readings Precision over long distances for consistent quality control The slim 30 × 1 mm cross-section and 1,500 mm overall length give a stable reference for measurement tasks where a single rigid ruler is impractical. The laser-etched graduations remain legible under heavy use, which supports repeatable readings and reduces the risk of misinterpretation during production checks. As a measuring device made from stainless spring steel, the rule combines dimensional stability with corrosion resistance, prolonging service life and lowering replacement frequency. The marking "Division A = mm/mm" indicates standard metric graduations in millimetres, suitable for direct reading without conversion. Practical handling that suits workshop workflows The flexible construction allows the rule to follow slightly curved surfaces and to be used in confined setups where longer rigid rules would be awkward. Its spring-steel construction returns reliably to shape after bending, which supports routine measuring tasks on benches and assembly lines. The compact 30 × 1 mm profile offers a balance between stiffness and flexibility, enabling comfortable handling and straightforward alignment against workpieces. The durable finish minimises wear during repeated use, contributing to fewer interruptions in the production process and a steadier workflow. Traceability and compliance for professional use This measuring rule is supplied as a testable item (inspection required), which aligns with workshop quality procedures that demand traceable measuring equipment. The combination of a clearly marked metric division and a corrosion-resistant substrate simplifies storage and periodic inspection. For applications that require documented verification before use, the flexible stainless rule can be integrated into existing measurement schedules. Technical queries or requests for additional data can be addressed by the supplier; standard contact channels are available for further specifications and procedural guidance. Choose the TECWERK flexible stainless steel scale for dependable long-span metric measurements and contact Metav Werkzeuge for specialist advice and supply from Emmerich Technical data Article number: 4000858766NW Product type: Steel scale Manufacturer: TECWERK Numerical data Length: 1,500 mm Cross-section: 30 × 1 mm Division: mm/mm Packing unit: 1 Features / Materials Material: stainless spring steel Scale: laser-etched graduations Flexible version Inspection required FAQ What is the exact measuring length of this scale? The TECWERK flexible stainless steel scale has a total length of 1,500 mm (SKU 4000858766NW). Are the graduations durable for workshop use? Yes, the laser-etched graduations on the steel rule are designed to remain legible under regular workshop conditions. Can the scale be used on slightly curved surfaces? The spring-steel construction permits gentle bending, so the rule can follow minor curves while returning to shape after use. What does Division A = mm/mm mean on the product? Division A denotes metric graduations in millimetres on the scale, allowing direct millimetre readings without conversion. Is the product subject to inspection or calibration? The product is supplied as requiring inspection required, and it can be included in a quality assurance schedule for traceability. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1500mm Steel Scale Flexible Stainless Steel 30x1 Divisions 1/2mm Laser-Engraved IP-Rating Not Specified - TECWERK
Take advantage of a flexible, corrosion‑resistant steel scale with a laser‑etched graduation for dependable long‑range measurements; its 1500 mm length and robust spring‑steel construction ensure repeatable results on the shop floor. Order directly via Metav Werkzeuge or consult the team for specification matching and supply from Emmerich. Steel Scale 1500 mm — flexible stainless spring‑steel rule, laser‑etched graduations (TECWERK) Steel Scale 1500 mm — a flexible, workshop‑grade measuring rule designed for layout, inspection and long‑run measurements. 1500 mm length for long measurements Laser‑etched graduations for durable markings Flexible spring‑steel ribbon for curved surfaces Suitable for inspection‑traceable applications Precision for long measurements and clear, lasting graduations The flexible steel rule provides a 1500 mm measuring span with a laser‑etched scale that resists wear and remains legible under heavy use. The graduation given as mm and 0.5 mm divisions allows for precise read‑off during layout and inspection tasks; laser etching prevents quick fading compared with printed markings. For production environments where measurable repeatability matters, the accuracy of the scale reduces rework and shortens measuring cycles. Built for durability: corrosion resistance and spring‑steel behaviour Constructed from stainless spring steel, the rule combines corrosion resistance with the elastic properties needed for bending around profiles or for compact storage. The cross‑section of 30 x 1 mm balances stiffness and flexibility so the ribbon lies flat on the workpiece yet rolls away neatly. The material choice and the robust marking technique make the tool suitable for harsher workshop conditions and extend service life compared with standard alloy rules. Practical application: where the rule adds operational value The long, flexible format is ideal for layout work, machine set‑ups and inspection tasks in machine shops and toolrooms where long edges or curved surfaces must be measured reliably. The combination of durable markings and a spring‑steel body simplifies routine inspection procedures, and the designation as subject to inspection supports traceable quality workflows. For procurement managers and workshop supervisors the ruler is a pragmatic choice for consistent, low‑overhead metrology on larger components. Contact Metav Werkzeuge for tailored advice and secure supply from Emmerich—rely on expert consultation to match this TECWERK steel scale to shop requirements. Technical data Article number: 4000858769NW UID: 4000858769NW Label: Stahlmaßstab L.1500mm rostfr.Stahl biegsam Teilung B=mm/1/2mm H.PREISSER Product type: Steel scale Manufacturer: TECWERK Numbers / Core technical data Length: 1500 mm Cross‑section: 30 x 1 mm Graduation: mm / 0.5 mm Packaging unit: 1 Special features / Design Material: stainless spring steel Flexible design (ribbon format) Laser‑etched scale for durable graduations Subject to inspection (prüfpflichtig: yes) FAQ What materials can this steel scale be used to measure or mark? The steel scale from TECWERK is intended for linear measurement and layout on metals and machined components; its laser‑etched graduations and spring‑steel body make it suitable for typical shop materials. How is the graduation expressed and how fine are the divisions? The graduation is provided in millimetres with additional half‑millimetre subdivision (mm / 0.5 mm), enabling finer read‑off for layout and inspection tasks on the 1500 mm span. Is the scale resistant to wear and corrosion? Yes—the rule is manufactured from stainless spring steel with a laser‑etched scale, combining corrosion resistance and durable markings for extended service life in workshop conditions. Does the product require calibration or special inspection? The item is marked as subject to inspection, which supports inclusion in traceable quality procedures; routine verification against a reference gauge is recommended for critical measurement tasks. What size and stiffness characteristics does the rule have for curved surfaces? With a cross‑section of 30 x 1 mm, the ribbon balances flat‑lying stiffness and the flexibility needed to follow gentle curves, making it practical for layout on both flat and slightly profiled workpieces. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Carbide Scriber Pencil With Replaceable Carbide Tip, Clip - Metav IndustryLine
Take advantage of the combination of robust replaceable carbide tip, compact mechanical‑pencil form and light weight for precise, low‑maintenance workshop marking; order directly via Metav Werkzeuge or consult the team for application advice. Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip (M214.035.N) The Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip is a compact marking tool designed for precise layout and scribing in metalworking and general workshop use. Replaceable carbide tip for long service life Mechanical‑pencil form for controlled marking 150 mm overall length for precise reach Lightweight: 20 g for comfortable handling Precise, durable marks from a replaceable carbide tip The core advantage of this marking tool is its replaceable carbide tip, which ensures consistently sharp, durable marks on hard materials while keeping life‑cycle costs low. The hard‑metal tip holds an edge far longer than softer leads, so fewer tip changes are required and marking quality remains reproducible for layout, centre‑punch substitution and scribe lines. This reliability supports leaner workflows and reduces downtime associated with frequent tool changes. Compact form for confident control and repeatability Thanks to the mechanical‑pencil style body and a total length of 150 mm, the instrument offers controlled one‑hand operation and improved tactile feedback compared with larger scribers. The compact design concentrates mass near the tip for stable contact and accurate line placement, making it well suited to detail work on fixtures, small assemblies and component edges. The lightweight construction reduces operator fatigue during repetitive marking tasks while preserving steady handling. Serviceable design that supports workshop sustainability A replaceable tip concept maximises usable product life and simplifies maintenance: worn or damaged carbide points can be changed without replacing the whole tool, which reduces consumable waste and procurement overhead. The simple geometry of the tip also means easy reconditioning and fast availability of spares. For workshops that value dependable marking performance and predictable tool upkeep, this scribing instrument delivers both cost efficiency and operational continuity. For dependable, serviceable marking tools from Metav IndustryLine, contact Metav Werkzeuge to discuss suitability for specific applications and to arrange supply of the M214.035.N carbide scribing needle. Technical Data Article number: M214.035.N GTIN: 4054469106335 ECLASS: 21049238 Customs tariff number: 90172039 Facts Length: 150 mm Weight: 0.02 kg Special features Replaceable carbide tip Mechanical‑pencil form Category: marking tools (Anreisszeuge) Label: Carbide scribing needle in mechanical‑pencil form, 150 mm with replaceable carbide tip FAQ What material is the tip made from? The tip is made of carbide (hard metal); the M214.035.N is supplied with a replaceable carbide tip for durable marking. Can the tip be replaced on site? Yes, the tip of the M214.035.N is designed to be replaceable so the body is retained while worn tips are renewed. Is this scribing needle suitable for fine workshop layout work? The compact, mechanical‑pencil form and 150 mm length make the tool well suited to fine layout and detailed marking tasks in a workshop environment. How heavy is the scribing needle in use? The instrument weighs 0.02 kg (20 g), offering comfortable handling for repetitive marking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Scriber Caliper T-Form With 100mm Stop, 0.01mm Resolution, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact, workshop‑ready measuring instrument that combines a T‑form scribing jaw, a digital display with On/Off, Zero, Unit and Hold keys and a hardened stainless‑steel construction for repeatable marking and dimensional checks. Order the instrument directly via Metav Werkzeuge or ask the consultants for application guidance. Digital Scribing Caliper T‑Form 150 mm (Metav IndustryLine) — digital display, T‑form scribing jaw The Digital Scribing Caliper T‑Form 150 mm is a compact, workshop caliper designed for precise scribing, step and outside measurements in general engineering and toolroom environments T‑form scribing jaw with 100 mm stop Digital display with On/Off, Zero, Unit, Hold Hardened stainless steel with bevelled scribing edge Fine‑adjustment thumb wheel for repeatable settings Precise everyday measuring for machine shops and toolrooms This caliper is classified in the standard range (measuring range up to 300 mm) and covers the most common workshop needs with a 150 mm reach. The resolution of 0.01 mm on the digital display delivers the typical clarity required for production checks and incoming‑goods inspection; this discrete increment supports fast decision‑making on the shopfloor and reduces rework by making tolerance checks straightforward. The electronic readout provides unambiguous numerical values, which speeds up quality control and shortens the measuring cycle compared with analogue alternatives. Robust construction that supports accurate scribing and marking The main beam and jaws are made from hardened stainless steel, with a bevelled scribing edge specifically shaped for marking. The T‑form scribing jaw permits reliable scribing alongside dimensional measurement, while the metal housing protects the electronics in daily use. The caliper’s mechanical design, combined with a fine‑adjustment thumb wheel, enables controlled contact and repeatable positioning when transferring dimensions or setting up fixtures, which improves process stability and reduces measurement uncertainty. User‑friendly electronics and data transfer for traceable measurements The instrument features a digital module with On/Off, Zero, Unit and Hold controls for rapid operation and flexible unit selection. A 3 V power supply runs the electronics for typical workshop duty cycles. The integrated RB 5 data output allows connection to compatible readout systems or data loggers, supporting documentation of measured values and integration into basic digital workflows. This makes the caliper suitable for situations where measurement records must be captured or forwarded for quality documentation. Practical benefits for production, assembly and maintenance Designed for everyday use in metalworking and maintenance, the caliper combines the convenience of electronic display with the functionality of a scribing tool. The 100 mm stop is useful when repeated reference from a fixed datum is required, while the caliper’s size and handling characteristics make it a versatile companion at the bench or on the machine. Backed by Metav’s emphasis on accessible precision and a broad distribution network in Emmerich, this measuring tool helps secure a dependable supply chain and supports efficient workshop practices. Discuss application details with Metav Werkzeuge in Emmerich to ensure the Digital Scribing Caliper T‑Form 150 mm meets specific workshop requirements and to secure procurement or integration advice Technical data SKU: M240.155 GTIN: 4054469178189 Customs tariff number: 90173000 Core technical data Measuring range: 0–150 mm Resolution: 0.01 mm Inch resolution (display): 0.0005 in Power supply: 3 V Stop length: 100 mm Materials & special features Hardened stainless steel beam and jaws Bevelled scribing edge for marking Metal housing for electronics T‑form scribing jaw design Digital display with On/Off, Zero, Unit and Hold RB 5 data output for external logging Fine‑adjustment thumb wheel for repeatable settings FAQ How accurate is the Digital Scribing Caliper T‑Form 150 mm? The caliper offers a digital resolution of 0.01 mm, suitable for standard industrial control tasks; this supports reliable tolerance checks in everyday machine‑shop work. Can the instrument mark components as well as measure them? Yes, the bevelled scribing edge and T‑form jaw permit controlled scribing alongside dimensional measurement, so marking and checking can be performed with a single tool. Does the caliper provide a data connection for traceability? The model includes an RB 5 data output, enabling transfer of measured values to compatible readouts or data‑logging equipment for traceable records. Is a calibration certificate included with this caliper? No ISO 17025 calibration certificate is specified for this model; the caliper is supplied in its standard factory condition without an explicit ISO 17025 certificate. What power source does the electronic module use? The display and electronics operate from a 3 V supply as specified for the device. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Hexagon Scriber Solid Carbide Long Shank, Sleeve Ø 6mm - TECWERK
Take advantage of a robust carbide tip and a hexagonal shank for reliable marking and long service life; the 150 mm length paired with a 6 mm sleeve diameter ensures good reach and compatibility with standard holders. Order the tool directly via Metav Werkzeuge or consult Metav’s specialists for technical advice and fast supply. Hexagonal Carbide Scribe 150 mm – TECWERK Hexagonal carbide scribe for precise marking and controlled handling in workshop environments Carbide tip for extended service life Hexagonal shank for secure clamping 150 mm overall length for reach and control Sleeve diameter 6 mm for standard holders Longer service life through carbide wear resistance The carbide tip provides a significantly higher wear resistance compared with standard tool steels, which translates into fewer interruptions for replacement and more consistent marking results over time. This wear resistance means that visible scribe lines remain crisp throughout extended use, helping to reduce costly rework and inspection loops. The hardness of the tip is suitable for routine marking tasks encountered in production and maintenance, while the overall construction keeps the tool light enough for manual handling and precise line work. Secure grip and reliable machine compatibility A hexagonal shank prevents rotation in the holder and improves torque transfer when used in powered or manual marking fixtures. The 150 mm length gives a comfortable working reach, allowing marks to be placed with control even in deeper or recessed areas. With a 6 mm sleeve diameter, the rod conforms to common holder dimensions, ensuring compatibility with standard collets and sleeves used in many workshops. The shank shape and dimensional conformity combine to improve setup speed and reduce clamp slippage. Practical workshop use and simple maintenance The tool is supplied as a single unit for straightforward stock management and quick deployment. Routine care consists of keeping the tip free from burrs and contamination to preserve marking quality; light dressing by a specialist service will restore form when necessary. For further technical clarification or application advice, Metav Werkzeuge acts as a precision partner and can supply additional data, alternative tool sizes or ordering support. Metav’s Emmerich centre functions as a quality filter for the European market, ensuring dependable supply and consistent product standards. Contact Metav Werkzeuge in Emmerich for ordering and technical guidance — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility and delivery options. Technical Data Article number: 2000858999NW Designation: Hexagonal carbide scribe, 150 mm Brand: TECWERK Pack unit: 1 UID: 2000858999NW Dimensions & core data Length: 150 mm Sleeve Ø: 6 mm Materials & special features Tip material: carbide (HM) Shank form: hexagonal Compatibility: standard 6 mm sleeves FAQ What is this tool for and how does it perform? The Hexagonal carbide scribe is a marking tool designed for precise scribing; the carbide tip of the TECWERK scribe maintains sharp marks over extended use and supports consistent workshop marking tasks. How is the tool mounted and what holders fit it? The hexagonal shank and 6 mm sleeve diameter allow the scribe to be clamped in common holders and collets; standard 6 mm sleeves are compatible with the unit supplied. Is the tip resharpenable or replaceable? The carbide tip is highly wear-resistant; when reconditioning is required, specialised sharpening or replacement by a qualified service is recommended rather than on-site grinding. What are the key dimensions to check before ordering? Confirm the 150 mm overall length and the 6 mm sleeve diameter for holder compatibility; the article number 2000858999NW can be used to ensure the correct SKU is supplied. How many pieces are supplied per unit? The product is supplied as a single unit (pack unit 1), suitable for direct integration into workshop stocks or for single-item purchases. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Replacement Scriber Needle For Marking Gauge With Round Shank, Single Piece - TECWERK
Take advantage of the combination of straightforward compatibility, dependable replacement fit and simple spare-part logistics to keep marking work moving without interruption. Order the part directly via Metav Werkzeuge or consult our specialists for compatibility guidance. Replacement scribing pin for marking gauge (round shank) – TECWERK The Replacement scribing pin for marking gauge (round shank) is a spare marking needle designed to restore precise layout capability for compatible marking gauges in workshop and production environments Compatible with marking gauge Art. 2000 858 940 Round shank for secure clamping Hardened steel tip for precise scribing Spare part, simple replacement fit Maintain uninterrupted marking and layout work The compatible spare scribing pin is intended to restore full functionality to a marking gauge quickly, ensuring production and workshop tasks continue with minimal downtime. Fitted as a direct replacement, the part is suitable for routine maintenance schedules and reduces the need for temporary workarounds. By keeping a simple spare on hand, layout accuracy is preserved and process reliability is increased without complex adjustments. Secure fit that preserves alignment and accuracy Thanks to the round shank design, the replacement pin is held firmly by the gauge clamping mechanism so the original alignment is preserved during use. This secure seating means the scribe line remains consistent from job to job, which is crucial when working to tight tolerances. The component is intended to integrate seamlessly with the tool’s existing mounting system, so precision is retained without additional set-up time. Simple spare-part logistics for every workshop Delivered as a single unit, the spare pin simplifies inventory management for service departments and procurement teams. The compact spare reduces lead times for essential repairs and supports straightforward exchange procedures during scheduled maintenance. Availability as an individual spare avoids unnecessary bulk purchasing while ensuring that a replacement is on hand when required, supporting steady workflow and predictable planning. Trusted sourcing and practical support for buyers Sourcing spares from a reliable supplier contributes directly to operational continuity; Metav’s role as a distribution partner offers transparent supply channels and consistent part availability. If clarifications about compatibility or installation are required, straightforward technical assistance is available to confirm fit with the specified marking gauge. This approach helps to lower procurement risk and supports decisive maintenance planning. Contact Metav Werkzeuge today to secure compatible TECWERK replacement scribing pins and ensure uninterrupted marking operations; consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number / SKU: 2000858942NW Label: Ersatzanreißnadel z.Streichmaß m.runder St. TECWERK Brand: TECWERK Facts Packaging unit: 1 UID: 2000858942NW Compatible article: 2000 858 940 Special features Compatible with marking gauge Round shank for secure clamping Spare scribing pin for easy replacement FAQ Is this spare pin compatible with other marking gauges? Compatibility is specified for the marking gauge listed as Art. 2000 858 940; compatibility with other models should be verified against the gauge clamping and shank dimensions before use. How is the replacement pin supplied and packaged? The replacement scribing pin is supplied as a single unit, intended for straightforward exchange during maintenance or repair work. Will the spare maintain the original layout accuracy? When fitted correctly, the spare scribing pin preserves alignment and marking consistency, restoring the gauge to its intended precision. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Replacement Scriber Needle With Roller For Marking Gauge, Single-Unit - TECWERK
Reliable replacement parts reduce downtime and preserve marking accuracy by combining simple compatibility with proven workshop suitability; order the spare scribing pin directly via Metav Werkzeuge or consult the team for assistance. Replacement scribing pin with roller — spare part for marking gauge, TECWERK A replacement scribing pin with roller designed as a direct spare for TECWERK marking gauges, ensuring consistent marking performance in workshop applications. Replacement scribing pin with roller Fits marking gauges 2000 858 580 and 2000 858 630 Supplied as a single unit Spare part for workshop marking tools Reduce interruptions with direct compatibility The replacement scribing pin with roller provides an immediate solution when the scribe element of a marking gauge reaches the end of its serviceable life. Compatibility with marking gauge article numbers 2000 858 580 and 2000 858 630 guarantees a precise fit, which preserves the original tool geometry and maintains repeatable line placement. For workshops that rely on accurate layout, keeping a compatible spare on hand minimises production stoppages and sustains process flow. The roller function supports smooth traversal along workpieces and helps reduce lateral deviation during scribing. Keep marking accuracy consistent and reliable By replacing worn tips with a matching spare, the original precision of the marking device is restored without the need for calibration changes. The roller-assisted scribe ensures a continuous contact point, which is especially useful on longer runs or on uneven surfaces where a fixed point could snag. The component acts as a straightforward spare part for marking tasks, offering a cost-effective means of maintaining measurement quality across repeated use. Technical users will appreciate that the part is intended specifically for the stated gauge models, avoiding trial-and-error fittings. Practical workshop stocking and continuity Supplied as a single unit, the item is suitable for toolrooms, joinery shops and maintenance departments seeking a compact spare-parts strategy. Metav’s distribution from Emmerich functions as a quality filter for the European market, combining broad product availability with dependable sourcing. Where a reliable replacement is required to keep marking routines uninterrupted, this spare scribing element restores function quickly and keeps the original marking gauge in service without modification. For further technical data or questions about suitability for specific applications, additional information is available from the supplier. Contact Metav Werkzeuge for procurement and technical advice on TECWERK spare parts and ensure uninterrupted workshop operation. Technical Data Article number: 2000858581NW SKU: 2000858581NW Label: Ersatzanreißnadel z.Streichmaß m.Laufrolle TECWERK Manufacturer label: TECWERK Numbers / Facts Packaging unit: 1 Special features / Versions Compatible with marking gauge Art.-Nr. 2000 858 580 and 2000 858 630 Suitable for marking gauge applications Product type: Replacement scribing pin FAQ What marking gauges does this spare part fit? The spare scribing pin fits the TECWERK marking gauges with article numbers 2000 858 580 and 2000 858 630 and is designed for direct replacement. Is the roller scribing pin supplied as a single piece or in a set? The part is supplied as a single unit, intended for individual replacement when a marking tip requires renewal. Can the roller scribing pin be used on different marking gauges? The roller pin is specified for the listed TECWERK gauge models; use on other gauges cannot be guaranteed and may require verification. Will replacing the pin affect the marking gauge’s calibration? Replacement with this matching spare restores the original contact geometry and is intended to maintain the gauge’s marking accuracy without additional calibration. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Scriber With Replaceable Reversible Carbide Tip And Clip, Hardened Tip - Metav IndustryLine
Take advantage of a robust carbide tip and an integrated centre punch to achieve repeatable, workshop‑grade markings with minimal effort; the compact 150 mm length ensures precise control and low operator fatigue. Order the tool directly via Metav Werkzeuge or consult our technical advisors for application guidance. Scribing awl M214.039 – Carbide tip, centre punch Scribing awl M214.039 for clear marking and spot‑punching in general workshop and metalworking tasks, built to offer durable contact points and comfortable handling. Carbide tip for durable marking Integrated centre punch for spot marks 150 mm length for comfortable handling Precise marking that withstands workshop use The compact marking implement combines a carbide tip with a slim profile to deliver consistent precision marking on a range of workshop components. The hardmetal point resists wear, so line clarity and repeatability remain stable across many operations; this reduces rework and supports quality control routines. At just 150 mm, the tool balances reach and rigidity, allowing controlled contact pressure and accurate line placement even in confined setups. The overall effect is fewer measurement corrections and a smoother production flow. Comfortable handling for repetitive tasks Ergonomics and low weight are decisive when marks must be repeated across many parts. The tool’s lightweight construction and compact length reduce wrist strain and improve positional control, which speeds up marking cycles without sacrificing accuracy. The built‑in centre punch function enables immediate spot‑punching where pilot points are needed, eliminating the need for a separate punch operation and saving production time. These practical advantages make the instrument well suited to daily use on assembly benches and in jobbing workshops. Built for reliability and straightforward upkeep A simple, robust design keeps maintenance demands low: the hardmetal tip maintains its geometry longer than softer points, extending service intervals and lowering lifecycle costs. The solid construction and clear function focus result in a tool that is easy to stow and ready when needed, supporting a dependable workshop routine. For procurement, selecting this marking implement helps ensure consistent markings across shifts and operators, contributing to reproducible outcomes on the shop floor. Choose the Metav IndustryLine scribing awl for durable, workshop‑ready marking — contact Metav Werkzeuge in Emmerich for technical advice and reliable supply Technical data Article number: M214.039 GTIN: 4054469106410 Customs tariff number: 90178090 ECLASS: 21049238 Dimensions & weight Length: 150 mm Weight: 0.052 kg Materials & features Carbide tip Integrated centre punch Category: Marking tools FAQ What is this tool best used for? The Scribing awl M214.039 is intended for precise marking and spot‑punching tasks in workshop and metalworking environments. How durable is the marking point? The hardmetal (carbide tip) on the M214.039 offers prolonged wear resistance for consistent marking over many uses. Is the size suitable for confined spaces? Yes, the 150 mm length provides a good balance of reach and control, making the instrument suitable for tighter work areas and repetitive marking. Can this tool replace a separate punch in many operations? The integrated centre punch function on the M214.039 allows immediate spot‑punching, reducing the need for an extra tool in many workflows. Which product code should be referenced when ordering? Reference SKU M214.039 (Scribing awl) when enquiring or ordering to ensure the correct marking tool is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision marking that speeds up workshop tasks
Marking tools are the foundation of accurate fabrication and repeatable setup in industrial workshops. From scribing parallel lines on metal to laying out joinery on timber, the right marking tools ensure cuts, drills and mill passes start from a clear, reliable reference.
How these tools perform on the shop floor
A typical set of marking tools includes the scriber, the scriber needle, the precision caliper and the marking gauge. Each instrument serves a defined purpose: the scriber and scriber needle create fine guide lines for drilling and milling; the precision caliper measures and transfers exact distances for internal and external features; the marking gauge produces parallel lines on wood and other sheet materials. Used correctly, these instruments reduce rework by turning layout into a measurable, repeatable process.
Practical benefits that matter in production
- Improved accuracy for millimetre work, enabling tighter tolerances and more first-pass success.
- Reduced setup time through repeatable marking and rapid transfer of dimensions.
- Versatility across materials — suitable for wood, metal and plastics.
- Ease of use: simple handling of the scriber needle and intuitive adjustment on the precision caliper speeds routine tasks.
- Better quality control: clear, durable scribed lines act as unambiguous guides during cutting, drilling and finishing.
Why Metav is the sensible sourcing partner
Metav stands for democratising precision. As a precision partner with decades of experience, Metav supplies workshop-grade marking tools from its Emmerich-based quality hub, combining a wide range with consistent quality control. With more than 48,000 customers and a portfolio exceeding 250,000 products, Metav offers reliable availability and expert advice, making it a practical choice for procurement managers and workshop professionals seeking a single dependable supplier.
Summary
Well-chosen marking tools — including the scriber, scriber needle, precision caliper and marking gauge — turn layout into a fast, accurate and repeatable step in every production process, raising throughput and reducing scrap.
FAQ
What is the difference between a scriber and a scriber needle?
A scriber produces continuous guide lines for edges and profiles, while a scriber needle creates single, fine marks or narrow lines that serve as precise reference points for drilling or aligning operations.
When should I use a precision caliper for marking?
Use a precision caliper whenever millimetre-accurate distances must be transferred directly to the workpiece, for both internal and external features; it is particularly useful in machine shops and metalworking where exact offsets are required.
Are marking gauges suitable for metalwork as well as woodworking?
A marking gauge is primarily designed for wood, where its sharp fence and beam produce clear parallel lines; for metal, the scriber and scriber needle are generally preferred because they provide the finer, more durable scribed lines needed for machining.
How do marking tools improve production efficiency?
By providing clear, repeatable layout references, marking tools reduce measurement errors and setup iterations, which shortens cycle times and increases first-pass yield on parts.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com