Precision marking and layout compasses to ensure exact transfers
Precision marking compasses and layout compasses are indispensable for transferring radii and distances with pinpoint accuracy in metalworking and toolmaking, offering reliable layout for subsequent machining operations. These compasses, spanners and scribing dividers excel at marking centre points and contour lines on hardened steel and other workshop materials, reducing scrap and ensuring consistent part fit. Made from hardened tool steel and fitted with wear-resistant tips, they provide durable, repeatable performance for layout, inspection and jig preparation. Integrating these tools into your workflow improves dimensional control, speeds up set-up and supports quality assurance across production environments.
1000 mm External Divider With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Take advantage of the robust steel construction, the 1,000 mm reach and the secure rivet hinge for repeatable layout and marking of large components; the tool is suitable for heavy workshop use and conforms to DIN 6484, ensuring standardised performance. Order the M214.239 directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. M214.239 Outside Divider with Rivet Hinge — 1,000 mm Steel (Metav IndustryLine) The M214.239 is an outside divider designed for marking and transferring distances across large workpieces in metalworking and fabrication. Rivet hinge for secure joint 1,000 mm reach for large layouts Steel body, compliant with DIN 6484 Better control when laying out large parts A long-reach divider delivers clear advantages when working on sizeable assemblies: the 1,000 mm span allows measurements and scribing across large plates, pipes or castings without joining smaller tools, reducing setup time. The extended length is realised in a rigid steel profile that resists bending during normal handling, which translates into consistent marking across repeated operations. For production runs and pattern work, this means fewer repositionings, lower cumulative error and improved throughput — a rational improvement for machine shops and toolrooms seeking efficiency gains. Durable joint and material for reproducible results The rivet hinge provides a straightforward, maintenance-light connection that keeps the legs aligned under regular use. Constructed from steel and produced to meet DIN 6484, the instrument offers mechanical stability and a familiar standard of quality for industrial environments. The simple hinge avoids backlash and, unlike adjustable-clamp joints that can creep, delivers reproducible spacing when transferred between tasks. This reliability supports confidence during layout work and reduces rework caused by shifting tools. Integrates with workshop processes and inspection routines As a classic divider in the workshop toolkit, the device complements fixtures, templates and inspection steps. Its straightforward geometry makes it easy to use for scribing arcs, transferring centres and stepping off distances; these are everyday tasks in fabrication, jig making and pattern transfer. The uncomplicated design requires minimal training and pairs well with digital measuring systems where required, offering a pragmatic balance between traditional hand tools and modern measurement workflows. Contact Metav Werkzeuge today for tailored advice on the M214.239 outside divider from Metav IndustryLine and recommendations for integrating long-reach marking tools into existing production processes Technical data Article number: M214.239 GTIN: 4054469107523 Tariff number: 90172039 Facts Length: 1,000 mm Material: Steel Standard: DIN 6484 Special features Rivet hinge Category: Divider / compass Brand: Metav IndustryLine FAQ What is the usable reach of the divider? The M214.239 outside divider provides a usable reach of 1,000 mm for marking and layout across large components. Is the joint suitable for heavy workshop use? Yes, the rivet hinge on the M214.239 is designed for robust handling and keeps the legs aligned for repeatable marking in workshop conditions. Which standard does this tool conform to? This long-reach divider is specified to DIN 6484, ensuring compatibility with recognised workshop standards for measuring and marking tools. What materials is the divider suitable for marking? The steel construction is appropriate for use on common workshop materials such as metal plates and castings when used for scribing and layout; it is intended as a hand tool for marking rather than machining. Can the M214.239 replace multiple smaller tools? For many layout tasks, the 1,000 mm reach reduces the need for joining smaller dividers or moving workpieces, streamlining marking routines and saving time on larger assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Bow Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
For reliable large-format marking, the combination of hardened steel construction, a stable rivet hinge and the 1,000 mm reach ensures reproducible scribing and fewer setup repetitions on the bench. Order the divider directly via Metav Werkzeuge or consult our specialists for specification advice. Bow-pointed divider M214.219 — 1,000 mm rivet-hinge layout instrument (Metav IndustryLine) The Bow-pointed divider M214.219 is a long-reach layout instrument designed for transferring distances and scribing arcs up to 1,000 mm, suited to metalworking, fabrication and general workshop marking Rivet hinge for stable leg alignment Hardened steel construction for durability 1,000 mm reach for large-format layout Conforms to DIN 6486 for workshop use Accurate large-format layout with reproducible marks The bow-style construction and rivet hinge provide consistent geometry over long legs, so lines and arcs remain true across the full 1,000 mm reach. Constructed from hardened steel, the tool resists tip wear and keeps the measuring geometry stable, reducing rework and saving machining time. Compliance with DIN 6486 signals that the instrument meets recognised workshop standards, supporting reproducible layout work and straightforward integration into quality processes. This combination of features makes the tool a practical choice where repeatable marking over large dimensions is required. Robust design that minimises downtime Built as a straightforward, mechanical layout instrument, the divider's hardened steel components tolerate the knocks and abrasion typical of a busy workshop environment. The rivet-hinge arrangement limits play between the legs, preserving accuracy without complex adjustment mechanisms. The simple, durable configuration reduces servicing needs and keeps inspection intervals predictable — a clear benefit for production environments where tool reliability and quick readiness matter more than frequent maintenance interventions. Practical handling for layout and transfer tasks The long legs and pointed tips are arranged for stable contact when scribing circles, transferring step measurements or marking parallel lines on plates and large assemblies. Handling remains intuitive: the leg geometry facilitates precise point placement while the rigid hinge keeps both tips parallel during transfer operations. The M214.219 from the Metav IndustryLine range is therefore suited to layout, marking-out and assembly checks in metalworking, fabrication and tooling sectors where a dependable long-reach divider is needed. Contact Metav Werkzeuge for procurement and technical advice on the Metav IndustryLine M214.219 and secure fast delivery from our Emmerich location Technical data Article number: M214.219 GTIN: 4054469107349 Category: Dividers Material: Hardened steel Standard: DIN 6486 Facts Length: 1,000 mm Tariff number: 90172039 eClass: 21170305 SKU: M214.219 Special features Rivet hinge Bow-pointed tips Hardened steel construction Long-reach layout instrument FAQ What maximum span can be scribed with this instrument? The divider achieves a maximum span of 1,000 mm; the M214.219 is designed for long-reach layout and transferring distances across large components. Is the hinge adjustable or fixed? The rivet hinge provides a stable, low-play joint; the M214.219 is built for consistent leg alignment rather than frequent hinge adjustments. Which materials is the divider best suited for? Made from hardened steel, the divider is intended for marking and scribing on metalwork and general fabrication materials where robust, repeatable layout is required. Does the tool meet a recognised workshop standard? Yes, the instrument conforms to DIN 6486, indicating it meets established requirements for workshop layout tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Internal Caliper With Riveted Hinge, Steel, DIN 6482 - Metav IndustryLine
Benefit from a robust steel construction, a rivet hinge for consistent alignment and a full 1,000 mm measuring range to handle large internal dimensions reliably — order the internal caliper directly via Metav Werkzeuge or contact our consultants for technical advice. Internal caliper M214.229 — 1,000 mm rivet-hinge divider (Metav IndustryLine) The Internal caliper M214.229 is a long-beam inside divider designed for precise internal measurements in fixture, mould and heavy‑duty workshop environments. 1,000 mm measuring range Rivet hinge for durable alignment Steel construction for long-term stiffness Complies with DIN 6482 standard Confident handling of large internal measurements The long-beam design offers a stable measuring span of 1,000 mm, making this divider particularly suitable where reproducible internal measurements are required across larger components. The combination of steel construction and a rivet hinge reduces the risk of play over time, which preserves alignment during repetitive use. For applications in fixture building and heavy assembly work, the robust geometry translates into fewer re-measurements and a more efficient inspection routine. Precision backed by recognised standards Compliance with DIN 6482 signals that the instrument meets established workshop metrology requirements for dividers and compasses. The long-range divider provides a clear, mechanical reference for internal measurements and is engineered to deliver consistent results across its span. The unit’s geometry is optimised to keep bending and deflection low for the class, supporting better repeatability when comparing larger internal diameters or locating bores. Practical design for workshop integration Fitted with a rivet hinge, the tool balances durable alignment with straightforward maintenance; the hinge secures the legs while allowing smooth, predictable movement. The long-beam configuration is classified in the large-range segment for callipers, addressing the demand for extended reach without sacrificing handling. The instrument’s straightforward form factor ensures it can be integrated into existing inspection routines, tacked into jigs or used on benches where space and rigidity are priorities. Contact Metav Werkzeuge today to request a detailed specification sheet or to discuss how the Metav IndustryLine internal caliper M214.229, 1,000 mm, can be integrated into current measurement workflows. Technical Data SKU: M214.229 GTIN: 4054469107431 Manufacturer: Metav IndustryLine Facts Measuring range: 1,000 mm Material: Steel Standard: DIN 6482 Customs tariff code: 90172039 eCl@ss: 21170336 ETIM: EC000029 Special features Rivet hinge (Nietscharnier) Long‑beam divider for large internal measurements Suitable for workshop and fixture construction Robust steel construction for reduced flex FAQ What is the measuring range of this divider? The internal caliper M214.229 features a measuring range of 1,000 mm, designed for large internal dimensions and fixture work. Is the hinge durable for repetitive use? Yes, the rivet hinge fitted to the Metav IndustryLine internal caliper M214.229 provides durable alignment and predictable movement for repeated measurements. Which standard does this instrument comply with? This long‑beam divider complies with DIN 6482, ensuring it meets recognised workshop metrology requirements for dividers and compasses. What material is used for the instrument? The tool is manufactured from steel to provide stiffness and long‑term stability over extended spans. Can this divider be used in fixture and mould making? The long‑range design and robust construction make the internal caliper M214.229 well suited to fixture, mould and heavy workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Rod Caliper With Carbide Marking Tips Ø25x100 - Metav IndustryLine
Take advantage of the combination of a 1,000 mm measuring range, stainless steel durability and carbide scribing tips for reliable layout and marking across large components; order directly via Metav Werkzeuge or request tailored advice from our consultants. Beam compass M201.275 — 1,000 mm range, carbide scribing tips (Metav IndustryLine) A robust Beam compass M201.275 for precise scribing and layout on diameters up to 1,000 mm, made from stainless steel with hardened carbide tips for long service life. 1,000 mm measuring range Stainless steel construction Carbide scribing tips for longevity Ø25 x 100 mm tip geometry Accurate large-format marking that speeds production The long-beam design provides a stable platform for reproducible scribing across large diameters, classifying this instrument in the large-range (500–1,000 mm) category used for substantial components. With a 1,000 mm measuring range and a solid shaft geometry, the beam compass translates layout steps into consistent results, reducing rework and set-up time. The combination of mechanical rigidity and engineered tip geometry ensures clear, repeatable scribe lines on sheet, plate and profile materials, supporting faster downstream machining and inspection workflows. Robust construction for harsh workshop use Constructed from stainless steel (INOX) and fitted with carbide scribing tips, the instrument resists corrosion and tip wear in everyday shop conditions. The relatively substantial shaft diameter contributes to stability during use; the tip geometry of Ø25 x 100 mm provides a secure contact area that minimises deflection and preserves edge definition. These properties extend service intervals and reduce maintenance downtime, so layout operations remain dependable even under frequent use. Simple handling and flexible integration in the workshop Operated mechanically and free of electronics, the analogue beam compass is straightforward to set up for scribing, transferring centre points and marking radii. It is compatible with caliper-based arrangements for larger assemblies, indicated as suitable for diameters up to 2,000 mm in combined measuring setups. The instrument’s mass and geometry make two-person handling easier for the largest tasks while maintaining the manual control craftsmen value for fine adjustments. Clear, mechanical operation supports traceable procedures and fits established workshop routines without the need for additional training. For dependable large-diameter scribing and layout, contact Metav Werkzeuge in Emmerich for technical advice or a tailored quotation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.275 GTIN: 4054469182766 Device type: analogue beam compass Measuring range: 0–1,000 mm Weight: 3 kg Shaft diameter: 19 mm Tip geometry: Ø25 x 100 mm Material: stainless steel (INOX) Special feature: carbide scribing tips (HM) Suitable for combined caliper setups up to diameters of 2,000 mm FAQ What materials can be scribed with this beam compass? The beam compass M201.275 is equipped with carbide scribing tips, making it suitable for scribing common workshop materials such as steel, stainless steel and non-ferrous metals; tip wear will depend on the specific substrate and usage. How does the accuracy compare for large diameters? For large-format marking the mechanical rigidity and Ø25 x 100 mm tip geometry deliver improved repeatability and reduced deflection; the design prioritises stable contact and consistent line definition across the full 1,000 mm range. Is the instrument supplied calibrated? This analogue beam compass is a mechanical layout tool; calibration practice varies by product batch—please refer to the accompanying documentation for any supplied calibration certificate where applicable. Can the tips be replaced if they wear? The carbide scribing tips are designed for durability and can be replaced; replacement intervals depend on application and material hardness, and replacement parts follow the original tip geometry for consistent results. Which workshop tasks is this instrument best suited for? The beam compass is ideal for marking and scribing large diameters, laying out profiles and transferring radii in fabrication, fixture and heavy machining shops where a robust, analogue solution is preferred. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Rod Caliper With Replaceable Carbide Tips, Flat Square Beam, 0.05mm Vernier, Stainless Steel - Metav IndustryLine
Take advantage of a robust measuring solution that combines a 1,000 mm measuring range, wear‑resistant carbide tips and a matt‑chrome, stainless steel scale for reliable, repeatable checks on large components; order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. Rod-type divider caliper 1,000 mm with carbide tips (Metav IndustryLine) — large-range stainless steel caliper with vernier and fine adjustment Rod-type divider caliper 1,000 mm with carbide tips is designed for long-span, workshop and heavy‑duty metrology tasks where stiffness and repeatability matter most. 1,000 mm measuring range Carbide measuring tips Stainless steel, matt chrome scale Built for repeatable large-length measurements The instrument is a long‑span rod caliper offering a 1,000 mm measuring capacity, classified for the “large” measuring range used in heavy machining and vessel or pipe assemblies. Its long bar geometry emphasises stiffness so that measurements remain reproducible across the full stroke; this reduces rework and speeds up set‑up in jigs, fixtures and component inspection. The caliper uses a mechanical vernier (nonius) with a reading of 0.05 mm, which positions it within industrial workshop tolerances suitable for routine quality controls and machine‑shop tasks. Accurate contact and fine control for delicate alignment Equipped with carbide tips, the caliper provides high wear resistance at the contact points, maintaining dimensional integrity over prolonged use. The integrated fine adjustment permits controlled closing forces and micro‑positioning during setting and transferring of dimensions, which is particularly beneficial when aligning large assemblies or checking bore centres. The matt‑chrome finish on the stainless steel scale reduces glare and improves legibility under workshop lighting, supporting quicker, more reliable readings without specialised instrumentation. Robust design, dependable supply and workshop readiness Constructed from stainless steel and weighing 10 kg, the caliper balances rigidity with manageable handling for two‑person operations where necessary. The straightforward mechanical design keeps maintenance simple and spare parts are readily identifiable by SKU. Metav’s IndustryLine combines practical workshop performance with broad availability from a central stock in Emmerich, reflecting a long track record of supplying precise tools to industry and trade. The result is a measurement instrument that lowers process variability and integrates into everyday inspection routines with minimal overhead. Discuss suitability and delivery options for the Metav IndustryLine 1,000 mm rod caliper with the Metav Werkzeuge team in Emmerich to ensure it meets specific application requirements. Technical data SKU: M201.175 GTIN: 4054469100890 Eclass: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–1,000 mm Resolution (reading): 0.05 mm Weight: 10 kg Measuring tips value: 105 Special features Material: stainless steel with vernier, matt chrome Carbide measuring tips Fine adjustment Category: rod/divider caliper FAQ How precise is the measurement with this caliper? The Rod‑type divider caliper 1,000 mm with carbide tips delivers a vernier reading of 0.05 mm, placing it within standard industrial tolerances for mechanical calipers and suitable for routine workshop quality control. Are the contact points resistant to wear? The caliper is fitted with carbide tips, which provide high wear resistance at the measuring contacts and help preserve dimensional accuracy over extended service life. Is this caliper suitable for large assemblies and fixtures? Yes — the 1,000 mm measuring range and the stiff rod design make the caliper appropriate for larger components, fixture checks and applications where long‑span reproducibility is required. Does the product information specify an ISO 17025 calibration certificate? The available product data do not indicate an ISO 17025 calibration; the listing does not state that an ISO 17025 certificate is supplied. Which SKU identifies this model for ordering or spares? Order and spare enquiries should reference SKU M201.175 for the Rod‑type divider caliper 1,000 mm with carbide tips Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Carbide-Tipped Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of carbide-tipped points, a riveted hinge and hardened-steel construction for precise, repeatable marking and scribing. Order the carbide-tipped divider directly via Metav Werkzeuge or ask our consultants if needed. Carbide-tipped divider M214.200.H — riveted hinge, hardened-steel, 100 mm Carbide-tipped divider M214.200.H designed for accurate scribing and layout work across metalworking and toolmaking applications. Carbide tips for durable scribing Riveted hinge for stable adjustment Hardened steel body for long service life Compliant with DIN 6486 Durable precision for layout and scribing operations The carbide tips offer excellent wear resistance when marking on metals, ensuring consistent line quality over prolonged use. With a body of hardened steel, the instrument resists deformation and retains alignment even under workshop conditions. The combination of a firm riveted joint and robust materials translates into reliable precision for repetitive layout tasks, reducing rework and improving process throughput for machinists and toolmakers. Stable adjustment that supports repeatable measurements A riveted hinge provides a controlled pivot point that avoids play and loosening during use, which is particularly important when transferring measurements across multiple components. The instrument’s 100 mm span suits common marking tasks while remaining compact enough for comfortable one-handed handling. This stability supports faster, more repeatable set-ups and fewer measurement errors on the shop floor. Simple maintenance and long-term value in the workshop The straightforward construction facilitates easy inspection and light maintenance; the hardened steel finish and carbide points reduce the need for frequent replacement. Conformity with DIN 6486 signals adherence to recognised standards, offering procurement managers clarity on specification and interchangeability. For workshops prioritising robust hand tools, this divider represents a cost-effective component in a quality-conscious toolkit. For workshop-grade marking that endures, choose the Metav IndustryLine carbide-tipped divider M214.200.H and contact Metav Werkzeuge for specification advice or delivery from Emmerich. Technical data Article number: M214.200.H GTIN: 4054469159225 eClass: 21170305 Facts Length: 100 mm Weight: 0.10 kg Tariff number: 90172039 Special features Material: hardened steel Carbide tips Riveted hinge Standard: DIN 6486 Category: divider / compass FAQ What materials can be marked with this divider? The carbide-tipped divider M214.200.H (Metav IndustryLine) is suitable for scribing on a wide range of metals thanks to its carbide points and hardened-steel construction. Is the hinge adjustable or fixed? The product features a riveted hinge designed for stable, low-play pivoting; it is manufactured to maintain alignment rather than to offer frequent adjustment. Does the divider meet recognised standards? Yes, the instrument complies with DIN 6486, indicating production to established measurement and workmanship criteria. What span does the divider cover and how does that affect use? With a 100 mm span, the divider is compact for bench and toolroom work while providing sufficient reach for typical layout and scribing tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
105mm Three-Point Replacement Tips Ø12mm Carbide For Rod Calipers From 500mm - Metav IndustryLine
Take advantage of the combination of carbide wear resistance, precise Ø 12 mm mounting and a 105 mm reach to restore reliable contact on large calipers; order the replacement tips directly via Metav Werkzeuge or consult our specialists for fitment advice. Replacement Tips for Bar-Divider Calipers (M201.175.1) – Carbide, 105 mm, Ø 12 mm (Metav IndustryLine) A set of Replacement Tips for Bar-Divider Calipers (M201.175.1) intended to renew contact points on calipers with measuring ranges from 500 mm, designed for workshop and industrial metrology applications Carbide tips for extended wear resistance 105 mm length for deep measurements Ø 12 mm shank for secure mounting Compatible with M201.175–M201.178 Restore accurate contact on large-range calipers Replacement contact points made from carbide deliver consistent repeatability for large-scale measurements. Installed on calipers with a measuring range classified as large-range (500–1,000 mm), the hardened tips resist wear that otherwise degrades measurement reliability over time. The result is a measurable reduction in rework and fewer out-of-tolerance parts during quality inspections, making the changeover a cost-effective maintenance action for production lines and metrology benches. Reach and stability where it matters The 105 mm length provides additional reach for recessed features and deep bores while maintaining a stable contact geometry. A Ø 12 mm mounting shank gives a precise fit into the holder, reducing play and ensuring reproducible seating pressure. Compatibility with the caliper series M201.175–M201.178 is specified to simplify selection; technicians benefit from a straightforward replacement that restores original contact geometry without modifications to the instrument. Workshop-ready durability and straightforward upkeep The empirically proven hardness of carbide ensures low abrasion under repeated use, which extends service intervals and keeps downtime to a minimum. These replacement tips are a practical maintenance item for metrology equipment used in toolmaking, fixture assembly and machine shops, and they support the reliable transfer of dimensional data during routine inspections. Replacement is performed quickly with basic tooling, enabling calibration cycles to continue with minimal interruption. Contact Metav Werkzeuge to confirm compatibility with specific calipers and to request ordering advice for Metav IndustryLine carbide replacement tips. Technical Data Article number: M201.175.1 GTIN: 4061905053610 Facts Length: 105 mm Shank diameter: Ø 12 mm Weight: 0.1 kg Special features Material: carbide Compatible with: M201.175–M201.178 Application: calipers from 500 mm measuring range FAQ How do these replacement tips improve measurement repeatability? The carbide composition of the replacement tips increases surface hardness and wear resistance, so the Replacement Tips for Bar-Divider Calipers (M201.175.1) preserve contact geometry and improve repeatability over prolonged use. Are these tips compatible with my caliper model? Compatibility is specified as M201.175–M201.178; for other models, Metav IndustryLine replacement tips should be checked against the shank diameter and holder design before purchase. Can these tips be used for internal and external measurements? The contact geometry of the replacement tips supports both internal and external contact tasks commonly encountered on larger calipers in workshop metrology. Is a special calibration needed after replacing the tips? After mechanical replacement, a quick functional check or calibration is recommended. If formal calibration is required, follow the established calibration procedure applicable to the measuring instrument. What advantages does the Ø 12 mm shank provide? A Ø 12 mm shank ensures a secure fit in compatible holders, reducing lateral play and improving the stability of the contact point during measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Spring Divider With Quick-Release Nut, Precision Finish - TECWERK
Take advantage of a precision design combined with a quick-release nut and robust, edged legs for reliable marking and fast set-up in the workshop; order direct via Metav Werkzeuge or consult our specialists for application advice. TECWERK Spring Divider L 125 mm – precision design with quick-release nut A TECWERK Spring Divider L 125 mm is intended for precise marking and transferring of measurements in general workshop and layout tasks. Precision design for fine marking Quick-release clamp nut for fast settings 125 mm leg length for compact handling Robust, edged legs for durable scribing Accurate layout work with dependable precision The compact spring divider is built as a precision tool for layout, scribing and transferring dimensions where repeatable accuracy matters. Its finely made hinge and stable legs minimise flexing and ensure consistent centre-to-centre distances, which translates into fewer re-measurements and smoother workflows. The precision execution provides a verifiable mechanical basis for marking tasks on metals, wood and composites, supporting efficient production processes and quality control in small and medium workshops. Faster adjustments and secure clamping for daily use Equipped with a quick-release nut, the instrument allows rapid locking and unlocking of the legs for quick repositioning and reduced set-up time. The clamping mechanism permits secure fixation without prolonged fiddling, improving throughput for repetitive marking tasks. Combined with the robust, edged legs, the construction resists wear from repeated contact with scribing points and layout surfaces, ensuring long-term repeatability and dependable performance under normal workshop conditions. Compact format and practical handling for routine tasks With a 125 mm leg length the divider stays compact and easy to handle while offering sufficient reach for most common layout operations. The geometry of the legs aids visual alignment and precise point transfer, making the tool suitable for fine carpentry work, metal scribing and general workshop marking. The compact size also means simple storage and transport between workstations, so the divider integrates naturally into a busy bench or portable tool kit. For additional technical questions or specification details, the Metav team can provide fast clarification. For supply and specialist advice on the TECWERK spring divider with quick-release nut, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data Article number: 2000858951NW SKU / UID: 2000858951NW Label: Federzirkel L.125mm m.Schnellspannmutter TECWERK Product type: Spring divider Manufacturer: TECWERK Facts Leg length: 125 mm Packaging unit: 1 Special features Precision design Quick-release nut Strong, edged legs FAQ What is the primary purpose of this spring divider? The TECWERK spring divider L 125 mm is designed for precise marking, transferring measurements and scribing tasks in workshop and layout applications. Can the divider be used on metal and wood? Yes; the robust, edged legs and precision construction make the divider suitable for scribing on common metals and wood for layout and marking work. How does the quick-release nut improve workflow? The quick-release nut enables fast adjustment and secure clamping of the legs, reducing set-up time and improving repeatability during repetitive marking operations. Is the 125 mm length sufficient for general bench work? The 125 mm leg length offers a compact reach appropriate for most bench tasks, combining manageable handling with adequate span for routine layout operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150 mm Bow Point Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Robust hardened steel construction combined with a secure rivet hinge and a 150 mm span ensures reliable scribing and transferring of measurements for everyday workshop tasks. Order the bow-point divider directly via Metav Werkzeuge or ask our consultants for specification support. Bow-point divider (rivet hinge) — 150 mm, Metav IndustryLine The Bow-point divider, rivet hinge, 150 mm is a compact precision divider designed for accurate marking and scribing in metalworking and general workshop applications. Hardened steel construction Rivet hinge for stable joint 150 mm beam for common workshop use Conforms to DIN 6486 standard Consistent accuracy and durable construction The divider is forged from hardened steel, a choice that promotes long-term dimensional stability and resistance to wear. The rivet hinge provides a rigid, low-play joint that keeps the points aligned during repeated use, aiding consistent precision when laying out circles or transferring measurements. Conformance to DIN 6486 signals that the tool meets recognised workshop tolerances, which supports predictable results across typical marking tasks. Practical benefits for daily workshop routines Lightweight yet sturdy, this 150 mm beam offers an effective balance between reach and control; the 150 mm length is a practical standard for many machining and fabrication operations where readability and manoeuvrability matter. The compact profile and modest weight make the instrument suitable for handheld use or for use at the bench, reducing user fatigue while maintaining accuracy. For marking, scribing and dividing, the design converts mechanical stability into improved repeatability. Care, setup and efficient handling Routine maintenance is straightforward: keep the hinge clean and apply a light lubricant to preserve smooth motion without introducing play. When setting the points, a controlled adjustment ensures repeatable layouts and helps protect the tips from undue stress. The tool’s simple mechanics make it compatible with workshop workflows where reliability and low maintenance are valued, turning a basic manual instrument into a dependable measurement aid. For tailored advice on applications and to secure this Metav IndustryLine bow-point divider with rivet hinge for workshop use, contact Metav Werkzeuge today — our advisors provide practical specification support from Emmerich. Technical data Article number: M214.211 GTIN: 4054469107264 Customs tariff no.: 90172039 Core specifications Length: 150 mm Weight: 0.17 kg Material: Hardened steel Standard: DIN 6486 Special features Rivet hinge Label: Bow-point divider, rivet hinge, 150 mm 0.14 kg Category: Compasses / Dividers ECLASS: 21170305 FAQ What materials is this divider suitable for? The divider is intended for general marking and scribing tasks; the hardened steel construction is suitable for use on common workshop materials during layout work. Is the joint adjustable to remove play? The rivet hinge is designed for a low-play, stable joint; careful initial adjustment and periodic light lubrication will maintain consistent performance. Does this tool comply with any standards? Yes, the instrument is supplied in accordance with DIN 6486, indicating adherence to recognised workshop tolerances for dividers. What is the article number for ordering? The article number is M214.211 and the product is listed under the Metav IndustryLine series for easy reference. Can this divider be used for transfer measurements between components? The stable hinge and hardened construction make the divider suitable for transferring measurements and scribing circles in typical workshop settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Compass With Pencil Holder, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a 150 mm reach combined with hardened steel construction and a secure pencil holder for reliable layout and marking tasks; order the divider directly via Metav Werkzeuge or consult the technical team for application advice. Divider with Pencil Holder M214.241 — 150 mm hardened steel (Metav IndustryLine) The Divider with Pencil Holder M214.241 is a compact, 150 mm marking instrument designed for precise workshop layout, technical drawing and repeatable scribing on metal and other workshop materials. Hardened steel construction for durability 150 mm span for precise marking work Integrated pencil holder for secure sketching Built for repeatable, workshop-grade precision The tool’s hardened steel frame and compliant manufacturing meet DIN 6486, providing a stable geometry that resists wear during use. This rigidity translates into consistent scribing and layout lines across repeated operations, reducing rework and inspection time. For engineers and skilled technicians who require a simple, robust instrument for part marking, the combination of material hardness and classic geometry yields measurable gains in workflow reliability. Secure pencil mounting for controlled sketching The integrated pencil holder keeps drawing media aligned with the leg axis, ensuring clean, reproducible lines without repeated readjustment. The holder accepts standard workshop pencils and allows quick replacement, which supports uninterrupted work at the bench. A well‑designed holder reduces lateral play, so marks remain true to the set span and the operator benefits from a steady, professional finish on layouts and templates. Practical tool for everyday layout and education use With a 150 mm measuring span, this instrument fits the common needs of mechanical workshops, toolrooms and vocational training environments where compact reach and manoeuvrability matter. The robust stainless appearance and straightforward mechanics require minimal maintenance and offer long service life, making it a cost‑effective addition to drawing boards and bench kits. When traceability and standards conformity matter, the proven construction and Metav IndustryLine quality control provide confidence at the point of work. Contact Metav Werkzeuge to request further technical details on the M214.241 divider or to arrange supply directly from Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M214.241 GTIN: 4054469107530 eClass: 21170305 Tariff code: 90172039 Label: Divider with Pencil Holder, 150 mm Facts Length: 150 mm File reference: m214241-main.jpg File reference (detail): m214241-detail.jpg Special features Material: hardened steel Standard: DIN 6486 Feature: pencil holder Category: Dividers / Marking instruments FAQ What is the working span of this divider? The divider offers a 150 mm maximum span, suitable for common workshop layout and marking tasks with the M214.241 divider. Is the construction suitable for metal workshop use? Yes, the hardened steel body of the divider is intended for robust workshop use and preserves geometry under standard operating conditions. Can standard pencils be used in the holder? The integrated pencil holder accepts standard workshop pencils and permits quick replacement to maintain consistent line quality. Does the instrument comply with any standards? Manufactured to align with DIN 6486, the divider meets common workshop and technical drawing expectations for form and function. Is the divider supplied with calibration or certificates? This product is a manual marking instrument; no calibration certificate is supplied with standard dividers unless explicitly stated on the product labelling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Internal And External Dial Probe Usable As Inside And Outside Stylus, 0.03 kg - Metav IndustryLine
Compact, versatile probe for internal and external marking with a 150 mm overall length and simple attachment to dividers; the accessory enables reliable transfer measurements and reduces rework. Order the M214.291 directly via Metav Werkzeuge or consult our specialists for application advice. Inside and Outside Scribe M214.291 — 150 mm probe for dividers (Metav IndustryLine) The Inside and Outside Scribe M214.291 is a compact probing accessory for marking and measuring internal and external features on workpieces, designed for use with dividers and compasses. Versatile for internal and external probing 150 mm overall length Compact workshop-friendly accessory Precise transfer marking capability Precise marking for internal and external features The M214.291 functions as a dual-purpose probe for both internal measurements and external measurements, enabling clear, repeatable scribe lines and transfer marks on components. By converting a standard divider into a dedicated marking tool, the device shortens setup time and reduces handling steps, which improves throughput in repetitive tasks. The 150 mm overall length offers a balanced reach without compromising guidance, making it practical for small to medium-sized components where controlled marking is required. This design supports consistent results across batch work and repair tasks, translating into fewer corrective operations and more predictable production flows. Practical design aimed at reliable workshop use Constructed as an accessory for dividers and compasses, the item is optimised for everyday workshop environments where robustness and ease of use matter. The compact form factor keeps the centre of gravity close to the fixture, improving handling and line control during marking operations. As a simple, mechanical solution without electronics, the accessory avoids downtime associated with powered devices and is straightforward to integrate into existing measurement toolsets. The model M214.291 is suitable for metalworking benches, tool rooms and precision shops that need an economical and durable option for transferring dimensions from drawings or gauges to workpieces. How the accessory benefits process and quality control Using this probe reduces cumulative measurement error by providing a single-purpose marking reference that can be fixed to a divider, ensuring repeatable contact conditions for successive parts. For quality control, clear scribe lines help operators locate machining start points and alignment references faster, supporting tighter process control and fewer scrap parts. The accessory complements manual gauging workflows and is ideal where simple, mechanical precision is required rather than electronic readouts. For workshops aiming to democratise precision without complex investment, this accessory offers a low-barrier improvement in marking accuracy and operational consistency. Contact Metav Werkzeuge in Emmerich to request technical details for the M214.291 or to discuss application suitability with our specialists Technical Data Article number: M214.291 GTIN: 4054469107899 EClass: 27144044 ETIM: EC000029 Customs tariff: 90172039 Category: Compasses (Zirkel) Dimensions / Measurable data Overall length: 150 mm Features / Applications Usable as internal and external probe Suitable for marking and transfer measurements Compact accessory for dividers and compasses SKU: M214.291 FAQ Is the accessory suitable for both inside and outside marking? The M214.291 is designed specifically for internal and external probing and supports both internal and external marking tasks as a divider accessory. What length does the probe provide and how does that help in the workshop? With an overall length of 150 mm, the M214.291 gives a practical reach for small to medium components while remaining easy to handle for repetitive marking. Can the probe be attached to standard dividers and compasses? The accessory is intended as a compact fitting for dividers and compasses, converting standard tools into a dedicated marking solution for transfer measurements. Does the accessory include any electronics or require calibration? The M214.291 is a purely mechanical accessory for marking; it does not contain electronics and does not require electronic calibration for normal workshop use. What typical applications suit this probe? The probe is well suited to metalworking benches, tool rooms and precision workshops where repeatable transfer marking and scribe lines are needed for machining, assembly or inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Spring Divider, Hardened Steel, DIN 6487 - Metav IndustryLine
Reliable marking and layout benefits meet workshop practicality: hardened steel construction and DIN 6487 conformity ensure durable, repeatable scribing over a compact 150 mm span. Order the spring divider directly via Metav Werkzeuge or contact our consultants for application advice. Spring Divider M214.245 — 150 mm spring scribing instrument (Metav IndustryLine) The Spring Divider M214.245 is a 150 mm spring‑tension divider for precise scribing and transfer work in workshops and layout departments, designed to meet DIN 6487 requirements. Hardened steel construction for long service life DIN 6487 compliant for standardised geometry Compact 150 mm span for workshop layout Durable construction for consistent layout results The core benefit of this scribing instrument is its hardened steel construction, which provides resistance to wear and preserves leg geometry over prolonged use. The spring mechanism guarantees steady leg tension, reducing slippage during marking and improving repeatability when transferring measurements onto workpieces. As a result, the tool delivers reliable performance for routine layout tasks in metalworking and general fabrication. Workshop efficiency with a compact, standard format With a 150 mm span the tool falls into the Standard class of layout instruments, offering a practical balance between reach and stiffness that suits most machine‑shop and metalworking applications. The compact size makes it easier to handle in confined set‑ups while still covering the common range required for fixtures, components and assembly marks. The reduced bulk speeds up positioning and helps maintain steady control during repetitive operations. Compliant design that supports quality assurance Compliance with DIN 6487 provides assurance of consistent geometry and dimensions, which simplifies in‑house quality workflows and documentation. Where standardised tool geometry is required for inspection routines or calibration records, a norm‑compliant scribing instrument reduces ambiguity and supports traceable processes. This makes the compass a dependable choice for production lines and inspection benches that rely on reproducible layout results. Practical features that aid daily use The spring‑loaded hinge enables one‑handed adjustment and steady contact pressure, while the slim, accurately formed legs facilitate marking in tight or recessed areas. The instrument’s construction aims to minimise play and maximise stability at the point, translating to fewer rechecks and less rework. Paired with straightforward maintenance, these practical qualities preserve tool performance and contribute to a smoother workflow. For precise layout and durable performance choose the Metav IndustryLine spring divider M214.245 — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.245 GTIN: 4054469107561 Category: Dividers / Compasses Manufacturer: Metav IndustryLine Dimensions & standards Length: 150 mm Tariff number: 90172039 Standard: DIN 6487 Materials & features Material: hardened steel Mechanism: spring tension for steady leg pressure Use: scribing, layout and transfer marking FAQ What tasks is this spring divider suitable for? The spring divider M214.245 is intended for scribing and transfer marking in workshop and layout tasks, offering a compact 150 mm span for general metalworking applications. Is the tool compliant with any standard? Yes, the instrument conforms to DIN 6487, ensuring standardised geometry for consistent marking performance. What material is the compass made from? The legs are manufactured from hardened steel to provide wear resistance and long service life. Does the spring mechanism improve accuracy? The spring tension reduces leg movement and improves contact stability, supporting repeatable marking and fewer measurement errors. Can this divider be used in tight or recessed areas? The slim leg profile and compact span make the divider well suited to confined spaces and recessed marking positions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Rod Caliper With Carbide Tips, Flat Square Beam, Fine Adjustment - Metav IndustryLine
Take advantage of the 1500 mm measuring range, interchangeable carbide tips and fine‑adjustment spindle for reproducible results across large assemblies; order the rod caliper directly via Metav Werkzeuge or consult our specialists for application advice. Rod divider caliper 1500 mm with carbide tips — long caliper with fine adjustment (Metav IndustryLine) The Rod divider caliper 1500 mm with carbide tips is a long‑reach measuring instrument designed for large components in heavy machining, jig and fixture construction and pipe or vessel work, combining a rigid stainless steel beam with a matt‑chrome vernier and a precise fine‑adjustment mechanism. 1500 mm range for large-format measurements Hardened carbide measuring tips for durability Stainless steel beam with matt chrome vernier Fine-adjustment spindle for precise setting Greater reach for large components and assemblies The 1500 mm range classifies this instrument in the Long caliper category (1,000–2,000 mm), making it suitable where standard workshop calipers lack span. The extended beam delivers consistent support and reduced deflection over long distances, which means fewer repeat measurements and faster throughput on large parts. This long‑format capability supports measurement tasks in heavy fabrication and tooling without compromising rigidity or handling. Durable contact points for repeatable measurements Interchangeable carbide tips on a robust stainless steel carrier resist wear and maintain measuring geometry even under frequent use. The matt‑chrome vernier reduces glare and aids visibility during manual reading, while the material choice ensures corrosion resistance in industrial environments. These design decisions translate into long service life and stable long‑term accuracy, reducing downtime for tip replacement and lowering total cost of ownership. Precise setting and reliable readout for efficient workflows A built‑in fine‑adjustment spindle enables gentle, controlled closure of the jaws for stable contact pressure and repeatable zeroing, improving measurement reproducibility on heavy components. The instrument offers a vernier reading resolution of 0.05 mm, suitable for general industrial and workshop quality control tasks where robust, repeatable results are required. This balance of coarse reach and fine control supports efficient inspection routines and reduces rework. For reliable long‑range metrology and durable contact performance, contact Metav Werkzeuge to discuss the Metav IndustryLine rod divider caliper (M201.176) and its suitability for specific large‑part applications — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M201.176 GTIN: 4054469100913 ECLASS: 21170344 HS tariff number: 90173000 Facts Measuring range: 0–1500 mm Maximum range: 1500 mm Resolution / reading: 0.05 mm Weight: 10 kg Measuring tip length: 105 mm Special features Interchangeable carbide measuring tips Stainless steel beam with matt‑chrome vernier Fine‑adjustment spindle for controlled setting Long caliper classification (1,000–2,000 mm) Suitable for heavy machining and fixture measurement FAQ What measuring span does this caliper cover? The rod divider caliper covers a measuring span of 0–1500 mm and is classified as a long caliper for large assemblies (SKU M201.176). Are the measuring tips wear‑resistant? Yes, the instrument is fitted with hardened carbide tips that are interchangeable, ensuring long service life and consistent contact geometry. How fine is the readout and adjustment? The vernier readout provides a resolution of 0.05 mm, and a fine‑adjustment spindle permits precise setting and repeatable contact pressure for stable measurements. Which materials and environments is this caliper intended for? The beam is made from stainless steel with a matt‑chrome vernier, offering corrosion resistance and robustness for industrial workshop environments where the rod caliper will be used frequently. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Rod Divider With Carbide Scriber Tips Ø25x100, Stainless Steel - Metav IndustryLine
Take advantage of the combination of a long 1,500 mm measuring range, robust stainless steel construction and wear‑resistant carbide scribing tips to mark and check large diameters with confidence; order the instrument via Metav Werkzeuge or consult our specialists for technical advice. Bar Compass 1500 mm with Carbide Tips (Metav IndustryLine) — stainless steel, long‑range divider for large components The Bar Compass 1500 mm with Carbide Tips is a heavy‑duty rod divider designed for marking and measuring large diameters in metalworking and fabrication settings Long-range measurement up to 1,500 mm Solid stainless steel bar, Ø19 mm Carbide scribing tips for durable marking Suitable for calipers up to Ø3,000 mm Reliable reach for large parts and repeatable layout Classified in the Long category for measuring ranges between one and two metres, this rod divider provides the reach required for sizeable workpieces while remaining manageable in a workshop. The 1,500 mm length gives access to bores, housings and pipes that standard tools cannot cover, and the sturdy Ø19 mm bar helps preserve straightness over the full span. This combination supports more reproducible layout and less rework, which improves process efficiency on larger assemblies. Durable construction for demanding marking and scribing Manufactured from stainless steel (INOX), the instrument resists corrosion and keeps sliding surfaces stable under frequent use. The supplied carbide tips are intended for scribing on steel and other hard materials; their hardened contact gives long service life and precise reference lines for subsequent machining or inspection. The tip geometry (Ø25 x 100 mm) and the overall mass of 4 kg add stability during marking, reducing chattering and improving line quality on thick plates or coated surfaces. Practical compatibility and straightforward operation in the workshop The divider is an analogue, manually operated layout tool that integrates with caliper‑based measuring workflows and is suitable for use where calipers must check diameters up to 3,000 mm. Its simple, robust adjustment mechanism and visible graduations make it quick to set and lock, supporting fast transfer from measurement to machining. The tool is especially useful in fabrication, toolroom and maintenance environments where reliable, repeatable scribing and diameter checks speed up setup and reduce scrap. Choose the Metav IndustryLine bar compass for dependable long‑range marking and measurement — contact Metav Werkzeuge for procurement and expert guidance on integrating this tool into production. Technical data SKU: M201.276 GTIN: 4054469182773 Brand: Metav IndustryLine Measurement range: 0–1,500 mm Maximum measuring range: 1,500 mm Weight: 4 kg Bar diameter: Ø19 mm Tip dimensions: Ø25 x 100 mm Material: stainless steel (INOX) Marking tips: carbide (HM) scribing points Operation: analogue, manual adjustment Suitable for caliper measurements up to Ø3,000 mm Category: Long (1,000–2,000 mm measurement range) FAQ What measurement range does the bar compass cover? The bar compass covers a measuring range from zero to 1,500 mm and is classified as a Long‑range divider. Can the carbide tips scribe on hardened steel? The carbide scribing tips on this Metav IndustryLine bar compass are designed for durable marking on steel and similarly hard materials; heavy hardening may influence tip wear depending on surface condition. Is this divider suitable for use with calipers for large diameters? Yes, the bar compass is compatible with caliper workflows and is suitable for checking diameters up to 3,000 mm using appropriate caliper attachments. How does the tool handle in workshop conditions? The stainless steel construction and the instrument’s mass (4 kg) provide stable handling and resistance to workshop wear, ensuring consistent scribing and measurement over time. What maintenance does the bar compass require? Routine cleaning of sliding surfaces and occasional inspection of the carbide tips for wear will keep the divider reliable; replace worn tips to maintain marking quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Carbide-Tipped Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a compact, durable measuring tool that combines hardened steel construction with carbide tips for long service life and reliable marking accuracy; the riveted hinge ensures repeatable leg alignment for workshop layout tasks. Order the item directly via Metav Werkzeuge or contact our consultants for specification advice to integrate this tool into existing measuring workflows. M214.201.H Carbide‑Tipped Divider, 150 mm (Divider/Compass) – Metav IndustryLine A carbide‑tipped divider M214.201.H designed for robust transfer and scribing tasks in metalworking and toolmaking, offering workshop‑grade durability and standard compliance. Carbide tips for durable marking Hardened steel construction Riveted hinge for consistent stability Conforms to DIN 6486 Repeatable scribing and layout for efficient production The tool delivers consistent mark transfer, letting teams reproduce layouts with minimal rework. Fitted with carbide tips, the device maintains a sharp contact point far longer than plain steel, which reduces time spent on tip dressing and replacement. The specified 150 mm span covers typical workshop tasks while keeping handling compact; this balance of reach and control supports faster setup in batch work and jigs, improving throughput without sacrificing line clarity. Built to endure workshop conditions Constructed from hardened steel, the divider resists wear and deformation during daily use, which preserves calibration and leg geometry. The riveted hinge secures the joint against loosening, so measured distances remain stable over repetitive cycles. Together, these features lower total cost of ownership by reducing service interventions and spare‑part needs, a rational advantage for production environments seeking predictable tool life. Practical handling that supports accurate work At approximately 0.13 kg, the instrument combines low mass with sturdy build, enabling steady one‑hand guidance for detailed scribing while avoiding unnecessary flex. The geometry and finish of the legs facilitate precise placement against edges and bore centres; this mechanical simplicity makes the divider a reliable choice where optical or electronic aids are unnecessary or impractical, particularly for shopfloor marking and manual jig adjustments. Standards and features that simplify specification Compliance with DIN 6486 provides a clear quality benchmark for procurement and inspection routines, easing integration into existing documentation. The use of carbide tips (hard metal) enhances wear resistance, and the simple mechanical design means training overhead is minimal for technicians familiar with conventional dividers. The tool is thus suitable as a workshop staple for layout, scribing and transfer measurements in mechanical and toolmaking trades. For a workshop‑grade divider with long‑lasting carbide tips and dependable hinge stability, request the M214.201.H from Metav Werkzeuge – contact our Emmerich team for delivery options and technical clarification Technical Data SKU: M214.201.H GTIN: 4054469159232 ECLASS: 21170305 Tariff number: 90172039 Facts Length: 150 mm Weight: 0.13 kg Standard: DIN 6486 Special features Material: hardened steel Tip: carbide (hard metal) tips Joint: riveted hinge Category: divider / compass FAQ What tasks is this divider suited for? The M214.201.H divider is intended for scribing, transfer and layout work in metalworking and toolmaking where a durable, repeatable marking point is required. Are the tips replaceable and what material are they? The device is supplied with carbide tips (hard metal) that provide high wear resistance; replacement depends on workshop practices but carbide notably extends service intervals. Does the divider comply with any standard? Yes, the divider meets DIN 6486, which simplifies specification and acceptance for industrial use. Is the hinge suitable for repeated precision use? The riveted hinge provides stable leg alignment and resists loosening during repetitive operations, supporting consistent repeatability. Which brand manufactures this divider? This item is supplied under Metav IndustryLine and is produced to workshop standards for robust daily use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper With Carbide Tips 0.1mm Resolution, Hardened Special Steel, Locking Screw - Metav IndustryLine
Take advantage of the combination of precise 0.1 mm readout and carbide measuring tips for dependable workshop measurements; the hardened special steel construction ensures repeatable results in daily use. Order the (Divider caliper 150 mm with carbide tips) directly via (Metav Werkzeuge) or ask our consultants if needed. Divider caliper — 150 mm with carbide measuring tips (Metav IndustryLine) Divider caliper 150 mm with carbide measuring tips — a mechanically read caliper designed for routine workshop and production measurements where robustness and clear readout matter 150 mm measuring range Carbide measuring tips for wear resistance Nonius readout 0.1 mm resolution Hardened special steel construction Reliable precision for everyday measurement This analogue caliper delivers clear, mechanical measurement with a Nonius readout offering 0.1 mm increments, a practical choice when straightforward, repeatable readings are required. The indicated resolution suits general workshop tasks and fits the standard range classification for calipers, balancing reach and rigidity. The design reduces setup complexity compared with digital instruments while still providing trustworthy numerical guidance for routine quality checks and layout work. The combination of a tactile scale and a locking facility supports consistent measurement of similar parts over a production run. Durable construction for repeatable results Constructed from hardened special steel with a non-reflective, matt chrome finish on the Nonius and main scale, the instrument resists wear and surface corrosion in a typical workshop environment. Carbide measuring tips protect the contact points from premature abrasion, extending service life where frequent contact with harder materials occurs. A secure locking screw maintains jaw position during transfer between stations, minimising measurement variation and helping to preserve accuracy across repeated checks. Ideal scope: a standard 150 mm solution With a 150 mm measuring range, this caliper sits within the workshop standard for machine and metalwork, covering the most common components encountered in assembly and maintenance. This scope offers a favourable ratio of reach to stiffness: measurements remain easy to handle while still accommodating the majority of everyday parts. The tool’s mechanical simplicity makes it a practical choice for production floors, toolrooms and maintenance departments needing reliable dimensional checks without specialised training. Practical handling and low maintenance Being an analog instrument, the caliper avoids battery dependence and electronic failure modes, simplifying long‑term maintenance. The matte scale reduces glare for faster visual reading, and the compact profile supports single‑handed operation during marking or checking tasks. Routine care consists of light cleaning and occasional lubrication of the slide; the robust materials and carbide tips mean downtime for repairs is rare, keeping inspection routines efficient and predictable. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine divider caliper with carbide tips can be integrated into workshop measuring routines and to request ordering details Technical Data Article number: M201.170.H GTIN: 4054469164267 Tariff number: 90173000 Facts Measuring range: 0–150 mm Resolution (nonius): 0.1 mm Type: analogue mechanical caliper Special features Carbide measuring tips Hardened special steel Nonius and scale matt chrome‑plated Locking screw for jaw fixation Category: Caliper (messschieber) FAQ What measuring range does this caliper cover? The caliper provides a measuring range of 0–150 mm, making it appropriate for standard workshop and machine‑shop tasks. What readout resolution and precision does it offer? The instrument uses an analogue Nonius with a 0.1 mm resolution; this readout is suited to general dimensional checks where coarse to medium precision is sufficient. What are the contact points made from? The measuring tips are made of carbide, which increases wear resistance and helps maintain reliable contact geometry over many cycles. Is the scale prone to glare during readout? The Nonius and main scale are matt chrome‑plated, which reduces reflections and aids quick visual reading under workshop lighting. Does the product come with an accredited calibration certificate? Product data does not specify delivery with an ISO 17025 calibration certificate; calibration status is therefore not indicated for this item Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Divider Caliper 0.1mm Resolution Hardened Tips, Locking Slide - Metav IndustryLine
Take advantage of a robust workshop caliper that pairs hardened measuring tips with a classic 0.1 mm vernier for reliable routine checks and layout work; the locking screw secures repeated measurements for process consistency. Order the divider caliper directly via Metav Werkzeuge or ask the consultants for tailored advice. Metav IndustryLine Divider Caliper M201.170 — 150 mm, 0.1 mm vernier, hardened tips The Divider caliper M201.170 is a compact, analogue measuring instrument designed for general machine‑shop and metalworking tasks, offering a 150 mm range and a vernier scale for straightforward dimensional checks 150 mm measuring range 0.1 mm vernier readability Hardened measuring tips Matt chrome plated scale Reliable build for everyday workshop use Crafted from special steel, hardened, this caliper is aimed at the standard workshop environment where durability and repeatability matter. The robust construction minimises wear at contact points, while the hardened measuring tips preserve edge geometry under frequent use. The matt chrome finish on the vernier and scale reduces reflective glare, making readings simpler under workshop lighting. Classified in the Standard (100–300 mm) group, this instrument balances reach and stiffness for typical machine‑building and metalworking applications. Clear analogue reading with practical accuracy The analogue 0.1 mm vernier provides a straightforward way to obtain coarse measurements without reliance on batteries or electronics. For many workshop tasks, the 0.1 mm resolution is sufficient for setting, inspection and layout duties; the vernier principle allows fine interpolation against the main scale for repeatable results. Because the caliper is non‑electronic, maintenance is minimal and downtime from battery replacement is eliminated—advantages for busy production benches where simplicity counts. Secure measurements and versatile use A positive locking screw fixes the jaw position for transfer measurements and repetitive checks, improving consistency across multiple parts. The instrument’s hardened tips suit contact with ferrous parts common in machining and fabrication, while the plain‑finish scale and nonius resist everyday shop soiling and abrasion. As part of the Metav IndustryLine, the tool benefits from rigorous stock control and a European quality filter, ensuring dependable supply and traceability for procurement teams and workshop managers. For a reliable, workshop‑ready measuring tool, request the Metav IndustryLine divider caliper M201.170 through Metav Werkzeuge—our Emmerich team can assist with procurement details and technical questions. Technical data Article number: M201.170 GTIN: 4054469100838 eClass: 21170344 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–150 mm Readability / Vernier: 0.1 mm Instrument type: Analogue vernier (nonius) Measuring tips: hardened Materials / Special features Material: special steel, hardened Scale and vernier finish: matt chrome plated Locking screw for repeatable positioning Hardened measuring tips for wear resistance Classified as Standard caliper (100–300 mm) FAQ What measuring range does this caliper cover? The divider caliper M201.170 covers a measuring range of 0–150 mm, suitable for standard workshop tasks. How fine is the resolution and how is it read? Resolution is 0.1 mm via the analogue vernier; readings are taken by aligning the nonius with the main scale for coarse but reliable measurements. Is the instrument suitable for heavy shop use? Yes, the hardened measuring tips and hardened special‑steel construction make the caliper robust enough for regular machine‑shop and metalworking applications. Does this caliper require batteries or electronic maintenance? No; the M201.170 is an analogue vernier instrument and therefore operates without batteries, reducing maintenance requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Divider Compass With Rivet Hinge Hardened And Ground Points, Square Legs - TECWERK
Take advantage of a robust, no-nonsense layout tool that combines precision scribing, reliable hinge alignment and hardened points for long service life; order directly via Metav Werkzeuge or consult our advisors for technical guidance. Pointed divider 150 mm with riveted hinge (TECWERK) — durable workshop scribing tool with hardened tips Pointed divider 150 mm with riveted hinge (TECWERK) is a compact, workshop-ready divider designed for precise marking and layout on a variety of materials, combining a riveted hinge with square shanks and hardened, ground points for consistent performance. Riveted hinge for consistent alignment Hardened, ground points for long wear Square shanks for stable, slip-free positioning 150 mm length for standard workshop tasks Highly accurate scribing for repeatable layout The divider is engineered for precision: the fixed riveted hinge and square leg profile reduce play and ensure repeatable spacing when transferring measurements or scribing arcs. The tool’s hardened and ground points hold an edge longer than untreated tips, which means fewer re-sharpening intervals and steadier marks on metal, wood or similar workshop materials. For layout tasks that demand consistent results, the combination of a solid hinge and robust points translates directly into reliable, measurable outcomes. Built to endure daily workshop use Durability is central to the design: the riveted hinge prevents loosening under repeated adjustment while the square shanks provide a secure grip in hand or clamp, improving stability during marking. The hardened tips resist wear during contact with abrasive surfaces, so the tool maintains its geometry over time — a practical advantage for routine production or repair work. This sturdy construction supports efficiency by reducing downtime for maintenance, contributing to a smoother workflow on the bench. Simple geometry that improves handling At an overall length of 150 mm overall length the divider is compact enough for benchwork yet long enough to cover typical scribing spans. The square shanks prevent the legs from rolling when set down, while the riveted joint gives a tactile, predictable feel when opening and closing the legs. These small ergonomic details help reduce handling errors and speed up layout operations, making the instrument a practical addition to any tool kit where clarity of line and dependable alignment are essential. For supply and expert advice on the TECWERK pointed divider, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — for reliable delivery and product guidance Technical details Article number: 2000858900NW UID: 2000858900NW Type: Pointed divider Manufacturer: TECWERK Packaging unit: 1 Dimensions / core data Length: 150 mm Design / special features Riveted hinge and square shanks Points hardened and ground Compact 150 mm layout divider Brand: TECWERK FAQ Is this divider suitable for marking on metal? The pointed divider 150 mm with riveted hinge (TECWERK) is designed for marking and scribing on typical workshop materials, and its hardened, ground points are suitable for repeated use on metal surfaces. How is the hinge constructed and how does it affect accuracy? The riveted hinge provides a fixed, maintenance‑free pivot that maintains alignment over time; in the TECWERK pointed divider this contributes to consistent spacing and improved repeatability for layout tasks. What maintenance do the points require? The hardened and ground points on the divider retain their shape longer than untreated tips; occasional honing restores the edge without frequent replacement in normal workshop use. What is the usable span of the divider and is it easy to handle? With a length of 150 mm, the tool covers standard scribing spans while the square shanks and compact geometry make handling stable and intuitive during benchwork. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Internal Caliper With Riveted Hinge, Steel, DIN 6482 - Metav IndustryLine
Benefit from a robust steel build and DIN 6482 conformity together with a secure rivet hinge and 150 mm span for reliable internal measurement and scribing — order directly via Metav Werkzeuge or consult our specialists for specification advice. Inside caliper (rivet hinge), 150 mm — Metav IndustryLine Inside caliper (rivet hinge), 150 mm is an instrument for precise internal measurement and scribing tasks in workshops and toolrooms, designed as a classic divider for everyday metrology. Rivet hinge for stable joint movement 150 mm measuring span for medium components Robust steel construction for long service life Conforms to DIN 6482 for standardised accuracy Precision design for repeatable internal measurement The instrument's solid rivet hinge ensures a stable pivot that minimises play during operation, which leads directly to repeatable results when measuring internal diameters or marking arcs. Constructed from steel, the tool benefits from consistent stiffness and wear resistance, making it suitable for routine work in production and maintenance. The 150 mm span offers a practical compromise between reach and control, enabling accurate work on medium-sized components without compromising handling. Practical benefits in everyday metrology Compliance with DIN 6482 signals adherence to recognised dimensional and manufacturing standards, supporting process reliability in small-series production and workshop quality checks. The simple geometry and familiar divider form make this instrument easy to integrate into established workflows: the compact shape allows steady manual guidance while the riveted joint reduces the need for frequent adjustments. For technicians requiring a dependable measuring and marking tool, this solution balances durability with straightforward use. Why the construction matters for measurement quality A rivet-hinged divider transfers operator input into predictable tip movement; this mechanical simplicity reduces sources of measurement variation compared with adjustable-joint alternatives. The steel construction contributes to low elastic deformation under normal use, preserving geometry over many cycles and protecting accuracy across repetitive tasks. Where consistent scribing or internal gauging is required, the engineering of the instrument directly supports lower rework rates and clearer production signalling. Suitable applications and workshop advantages This divider is well matched to tasks such as internal diameter checks, layout marking and transfer measurements on medium assemblies found in machine shops, maintenance departments and toolmaking. Its familiar form factor keeps training requirements minimal, while the standard-compliant design helps integrate documented inspection steps into quality procedures. For workshops seeking a reliable, low-complexity measuring tool, this instrument offers a pragmatic balance of precision, robustness and usability. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine 150 mm inside caliper and to arrange supply directly from our Emmerich warehouse Technical data Article number: M214.221 GTIN: 4054469107356 eCl@ss: 21170336 ETIM: EC000029 Facts Measuring length: 150 mm Customs tariff number: 90172039 Special features Material: Steel Joint type: Rivet hinge Standard: DIN 6482 Category: Dividers / compasses FAQ What measurement tasks is this divider best suited for? This divider is intended for internal diameter checks, scribing and transfer measurements; the 150 mm span and robust steel construction make it suitable for medium-sized workshop components. Is the instrument compliant with any standards? Yes, the tool is manufactured in accordance with DIN 6482, which supports integration into standardised inspection routines. How durable is the rivet hinge compared with adjustable joints? The rivet hinge provides a stable pivot with minimal play, offering durable, low-maintenance performance under normal workshop use. Can this divider be used for precision layout and marking? The divider's geometry and material make it well suited for precise layout and marking tasks where repeatable tip placement is important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Outside Caliper With Rivet Hinge, Steel, DIN 6484 - Metav IndustryLine
Robust 150 mm steel construction and a maintenance‑free rivet hinge ensure repeatable layout and long service life; lightweight balance at 0.1 kg aids steady handling on the bench. Benefit from precise marking and industrial conformity under DIN 6484. Order the outside scribe directly via Metav Werkzeuge or ask our consultants if needed. Outside scribe (divider) — M214.231, 150 mm steel with rivet hinge (Metav IndustryLine) A sturdy outside scribe M214.231 designed as a 150 mm divider for precise circle‑laying and transfer work in metal and woodworking shops, offering simple handling and reliable repeatability. Robust steel construction Rivet hinge for durable pivot 150 mm range for precise marking Precision marking for repeatable layout A workshop tool engineered for consistent results: the solid steel legs and fixed rivet hinge reduce play and preserve the set radius during repeated operations, which translates into fewer rechecks and faster throughput on routine layout tasks. The moderate 150 mm span covers the most common marking radii without sacrificing stiffness, so the instrument behaves predictably when scribing or transferring centres on sheet metal, plates or timber. Emphasis is placed on measurable performance rather than marketing claims, making this divider a practical choice where reliability and reproducibility matter. Built for durability and straightforward handling Durability is a core advantage: the riveted pivot is inherently low‑maintenance and resists loosening from vibration or frequent adjustment, while the lightweight assembly provides a balanced feel at the tip. Compliance with DIN 6484 signals standardised dimensions and manufacturing tolerances, which supports consistent integration into existing workshop processes. The compact mass of approximately 0.1 kg keeps operator fatigue low during repetitive tasks, and the uncomplicated geometry makes the tool suitable for both bench work and mobile measurement tasks on the shop floor. Practical uses and workshop compatibility Designed as a classic divider/compass, this instrument excels in layout, radius transferring and scribing tasks for fabricators, toolmakers and joiners. The simple construction means it pairs well with standard marking aids and centre punches and can be stored easily in a toolbox without additional protection. For applications requiring traceable calibration or advanced force control, other instrument classes exist; for straightforward, robust layout work, the M214.231 provides a cost‑efficient, dependable solution that integrates well into daily shop routines. Contact Metav Werkzeuge for tailored advice on workshop compatibility or ordering assistance — Metav IndustryLine specialists are available to clarify specifications and application fitment Technical data Article number: M214.231 GTIN: 4054469107448 Category: Divider / compass Facts Length: 150 mm Weight: 0.1 kg Standard: DIN 6484 Customs tariff number: 90172039 Special features Material: Steel Rivet hinge (permanent pivot) Label: Outside scribe, rivet hinge Brand: Metav IndustryLine FAQ Is this divider suitable for marking metal and wood? The outside scribe is intended for general layout and marking on both metal and wood; the steel construction and rivet hinge support reliable scribing across typical workshop materials. How stable is the pivot over repeated use? The rivet hinge provides a durable, low‑play pivot that preserves the set radius through repeated operations, ensuring lasting stability for the M214.231 divider. Does the instrument meet industry standards? Yes — manufacture adheres to DIN 6484, which governs relevant dimensions and tolerances for this type of layout instrument. Can the divider be used for fine precision work? This divider is designed for dependable workshop layout rather than sub‑micron measurement; for ultra‑high precision tasks, dedicated metrology instruments are recommended. What maintenance is required for the rivet hinge and tips? Minimal maintenance is needed: periodic inspection and light cleaning keep the rivet hinge and scribe points serviceable for extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Point Divider With Adjustable Arm Hardened And Ground Tips, With Hinge And Square Shank - TECWERK
Take advantage of a compact, workshop-ready marking tool that combines a precise 150 mm span, hardened and ground points, and a secure riveted hinge for reliable layout work; order directly via Metav Werkzeuge or consult the Metav team for application advice. TECWERK 150 mm Pointed Divider with Adjusting Bow TECWERK 150 mm Pointed Divider with Adjusting Bow is a compact workshop scribing tool for accurate layout and marking in light to medium tasks Riveted hinge for long-term stability Square legs for consistent alignment Hardened and ground points for precise marking 150 mm span for medium-sized layouts Precision marking that reduces rework The compact scribing instrument delivers consistent line definition thanks to hardened and ground points, which maintain a fine tip under repeated use. The 150 mm span offers a practical balance between reach and control, enabling clear transfer of measurements across panels and components. By converting accurate settings into repeatable marks, the tool minimises the need for rework and supports a smoother workflow in layout and template tasks. Robust construction for everyday workshop use A riveted hinge and square legs contribute to mechanical stability and predictable alignment during marking operations. The adjusting bow allows fine, controlled changes to the span without sudden slips, so measurements remain stable while working. Together these elements form a durable, low-maintenance solution that withstands frequent handling, keeping precision available at the bench for longer and reducing interruptions for recalibration. Practical handling and typical applications Designed as a straightforward scribing and layout implement, the divider excels in transferring distances, marking hole centres and laying out joint lines on workpieces. The combination of a secure hinge and sharpened points ensures accurate contact with the surface and dependable repeatability when copying dimensions. For operators seeking a reliable analogue tool for everyday layout tasks, this scribing instrument provides a familiar feel with improved control and durability. Discuss integration with Metav Werkzeuge to match this TECWERK pointed divider to specific workshop needs — contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com for tailored advice Technical Data Article number: 2000858911NW Label: Pointed divider L.150 mm with adjusting bow TECWERK Product type: Pointed divider Manufacturer: TECWERK Execution: with adjusting bow Enrichment: with riveted hinge and square legs · points hardened and ground Packaging unit: 1 UID: 2000858911NW Specifications Length / span: 150 mm Packaging unit: 1 Special features Riveted hinge for stability Square legs for alignment Hardened and ground points Adjusting bow for fine setting FAQ How precise are the marks produced with this divider? The TECWERK pointed divider (SKU 2000858911NW) produces consistently fine marks due to its hardened and ground points and stable hinge, supporting accurate layout work. Is this scribing tool suitable for general workshop layout tasks? Yes, the divider is intended for workshop scribing and layout; the 150 mm span and secure construction make it well suited for everyday marking and dimension transfer. Can the points be maintained to preserve accuracy? The points are hardened and ground to extend service life; routine inspection and professional resharpening preserve the marking quality over time. What advantage does the adjusting bow provide? The adjusting bow allows precise, incremental span changes so that the setting remains steady while marking, improving repeatability and reducing alignment errors. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Point Divider with Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Benefit from the combination of hardened steel construction, a stable rivet hinge and conformity to DIN 6486 for reliable, repeatable layout work; order the divider directly via Metav Werkzeuge or consult our advisors if clarification is needed. Pointed divider M214.201 — 150 mm, rivet hinge, hardened steel (Metav IndustryLine) Pointed divider M214.201 is a precision layout instrument designed for marking, transferring and scribing distances in metalworking and general workshop applications. Hardened-steel construction for durability Rivet hinge for stable alignment 150 mm span for standard workshop tasks Conforms to DIN 6486 for proven accuracy Stable geometry for accurate layout and transfer The divider is built from hardened steel, providing a consistent contact geometry that resists deformation during regular use. The rivet hinge ensures that the leg spacing remains fixed under light pressure, which reduces repositioning and improves repeatability when transferring measurements across workpieces. Conformity with DIN 6486 gives a clear technical reference for expected behaviour, making the instrument suitable for routine layout tasks where documented standards and traceability matter. Ergonomic size that matches workshop workflows At 150 mm, this span hits the practical sweet spot for everyday measuring and marking in machining and metal fabrication: long enough to handle common components, yet compact enough for one-handed control and fine adjustments. The tool’s weight and balance (compact construction) support precise scribing without excessive force, so layout steps are completed faster and with fewer alignment checks, increasing throughput on repetitive tasks. Low-maintenance build for reliable service life The choice of hardened steel minimises wear at the contact points and hinge, delaying the onset of play that would otherwise compromise accuracy. Surface treatment and robust joint design reduce the need for frequent adjustment, meaning less downtime for calibration or repair. For workshops that prioritise dependable everyday tools, this design lowers the total cost of ownership through extended service intervals and consistent results. Typical uses and measurable compliance The divider is suitable for scribing, transferring distances, setting out on plates and marking pitch circles in toolrooms and small-batch production. The straightforward mechanical concept supports a variety of tasks in metalworking and general fabrication. Its compliance with DIN 6486 provides a recognised benchmark for quality, which aids in internal documentation and quality processes where conformity to standards is required. Contact Metav Werkzeuge for detailed technical clarification or to arrange procurement of the Metav IndustryLine divider M214.201; advisors at Metav Werkzeuge can provide specification support and delivery information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.201 SKU: M214.201 GTIN: 4054469107196 Manufacturer: Metav IndustryLine Category: Zirkel Facts Length: 150 mm Tariff number: 90172039 eCl@ss: 21170305 Standard: DIN 6486 Special features Material: hardened steel Rivet hinge for stable leg alignment Intended use: marking, scribing, distance transfer Robust, low-maintenance mechanical design FAQ What material is used for the tip and legs? The legs and working surfaces of the Pointed divider M214.201 are made from hardened steel, ensuring wear resistance and consistent contact geometry for layout tasks. Is the divider suitable for precision tooling and jig work? Yes. The Metav IndustryLine divider M214.201, with its rivet hinge and hardened-steel construction, is intended for precise marking and transfer work commonly required in jig and fixture preparation. Does the instrument comply with any standards? The divider conforms to DIN 6486, providing a clear standard reference for expected performance in workshop and production settings. What span does the divider cover and what is that useful for? The working span is 150 mm, a practical length for everyday marking and transferring tasks in metalworking, toolmaking and workshop settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Spring Divider With Quick-Release Nut Precision Finish, Strong Square Legs - TECWERK
Benefit from the combination of precision execution, a quick-release nut and strong angular legs for consistent, repeatable scribing. The compact 150 mm size keeps layout work precise in confined spaces. Order direct via Metav Werkzeuge or consult the team for application advice. TECWERK 150 mm spring divider — precision marking tool with quick-release nut The TECWERK 150 mm spring divider is designed for precise layout and scribing tasks in workshop and repair settings. Precision execution for accurate scribing Quick-release nut for fast adjustment Strong angular legs for stable marking Engineered for repeatable accuracy on the bench The device is built as a precision tool intended for consistent layout work. Its 150 mm span delivers a compact working range suited to fine scribing tasks where repeatability matters; setting and transferring distances is simplified thanks to the robust leg geometry. The spring-loaded action maintains steady tension, which supports uniform contact pressure during marking and helps avoid slips that would impair repeatability. For teams requiring reliable results in production or repair, this construction reduces rework and supports a predictable workflow. Rapid adjustment and controlled fine setting A defining feature is the quick-release nut, which permits both secure locking and fast repositioning of the legs. The mechanism combines speed and control: coarse adjustments are swift, while the clamping action gives a stable final setting for accurate transfer marks. This reduces setup time and minimises interruptions to the process, improving throughput in repetitive layout operations. The nut design is straightforward to operate even when working under time pressure, contributing to efficient marking cycles. Robust geometry for dependable scribing performance The legs are strong and angular, enhancing stability when drawing arcs or transferring measurements. The geometry concentrates force along the legs to maintain a steady tip-to-surface relationship, supporting clean, repeatable lines. The compact form factor keeps the tool manoeuvrable in confined areas without sacrificing control. Combined with the precise mechanism, the tool is suited to routine workshop layout duties where dependable marking accuracy is essential. Metav Werkzeuge supplies this item as part of a broader selection that helps standardise precision across the workshop. Select the TECWERK spring divider for consistent layout quality and contact Metav Werkzeuge for expert guidance and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000858952NW Label: TECWERK spring divider L 150 mm with quick-release nut Manufacturer: TECWERK Product type: Spring divider Packaging unit: 1 UID: 2000858952NW Dimensions / measurable data Length: 150 mm Special features Precision execution Quick-release nut Strong, angular legs Compact 150 mm span FAQ What is the working span of the divider? The working span is 150 mm; the TECWERK spring divider (SKU 2000858952NW) is deliberately compact for detailed layout work. How does the quick-release nut affect accuracy? The quick-release nut enables fast repositioning and secure clamping, so the TECWERK divider can be set quickly while maintaining a stable, accurate mark. Is the tool suitable for frequent shop use? Yes; the combination of precision construction and strong, angular legs supports regular workshop scribing and transfer operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Spring External Calliper Hardened Steel, DIN 6487 - Metav IndustryLine
Robust, hardened-steel construction and a 150 mm overall length deliver precise, repeatable external scribing in a compact format; compliance with DIN 6487 ensures workshop-grade reliability. Order the instrument directly via Metav Werkzeuge or consult the team for application advice. Spring-Loaded Outside Scriber M214.801 — Hardened steel, 150 mm (Metav IndustryLine) The Spring-Loaded Outside Scriber M214.801 is a compact, hardened-steel marking instrument designed for precise external scribing and repeatable positioning in general workshop and metalworking tasks. Hardened steel construction Complies with DIN 6487 150 mm overall length Consistent contact for repeatable marking The spring mechanism provides a constant contact force, which translates into repeatable scribing across multiple parts and reduces the need for rework. Built to the DIN 6487 standard, this marking implement was engineered for predictable behaviour in production and repair contexts; the standardised geometry facilitates interchangeability with fixtures and measuring jigs. As a result, workflows that rely on consistent datum references benefit from fewer alignment errors and more reliable downstream processes. Durable materials without unnecessary bulk Manufactured from hardened steel, the tool combines surface resilience with a form factor suited to bench and field use. The compact overall length of 150 mm provides a practical balance between reach and rigidity, making the instrument easy to manoeuvre while maintaining stable tip engagement. The robust material choice ensures abrasion resistance at the contact points and long service life under normal workshop use, supporting ongoing operations with minimal maintenance. Quick set-up and precise alignment for marking tasks As a category companion to compasses and dividers, the device excels at external scribing and positioning of edges and bores. The spring-loaded tip aids rapid alignment, allowing operators to establish consistent lines or reference points with fewer adjustments. Where traceability and process repeatability are required, the familiar form factor and standard-compliant design integrate smoothly with existing procedures, helping to accelerate marking steps and preserve component quality. Contact Metav Werkzeuge for specification support or to request the Metav IndustryLine spring-loaded outside scriber M214.801, available from our Emmerich stock; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M214.801 GTIN: 4054469183084 Label: Spring-loaded outside scriber, 150 mm Facts Overall length: 150 mm ECLASS: 21170325 Standard: DIN 6487 Special features Material: hardened steel Function: spring-loaded external scribing Category: Compass (divider) Brand: Metav IndustryLine FAQ What is the primary application of this tool? The spring-loaded outside scriber is intended for precise external scribing and positioning in metalworking and general workshop marking tasks; the Metav IndustryLine M214.801 is optimised for repeatable edge and bore referencing. Is this instrument standard-compliant? Yes, the device is manufactured to DIN 6487, ensuring consistent geometry and behaviour suitable for workshop and production environments. What material is used for the tool? The M214.801 is made from hardened steel, chosen for wear resistance and long-term durability at scribing contact points. How should the tool be maintained for best results? Keep the contact tip clean and protected from corrosion, store the instrument in a dry place and inspect the spring action periodically to confirm consistent contact force; replace worn tips to maintain repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pinpoint layout and repeatable radii for workshop precision
The category covers dividers for industrial scribing and measurement transfer, including bow compasses, point dividers and scribing compasses designed for heavy-duty workshop use. These tools serve the essential task of transferring centres, radii and distances reliably onto metal and other workpiece surfaces.
How dividers and related tools work in production
Used alongside granite surface plates and height gauges, dividers enable exact layout of bores, edges and machining references before cutting or drilling. In practice, parallel scribing gauges and ergonomic scribing needles with carbide tips create fine, durable lines on hardened steel without weakening the material. For vertical measurements, height gauges — from mechanical models with vernier or double-counter readouts to digital height gauges with high resolution, data interfaces and quick tolerance checks — ensure height transfer that integrates with traceable measuring workflows. Measuring dividers with hardened points and robust joints keep set dimensions stable, even under repeated use, while quick-clamp fine adjustments permit rapid re‑setting during batch production.
Tangible benefits that improve throughput and quality
- Increased first-pass yield through accurate transfer of bore centres and edges.
- Reduced setup time via stable fixation and quick-clamp fine adjustments.
- Longer service life thanks to components in hardened tool steel, stainless alloys and carbide tips.
- Seamless integration into inspection routines using digital height gauges with data-export capabilities.
- Consistent repeatability when scribing radii and distances with engineered joint stability.
Metav as your precision partner for everyday workshop needs
Metav combines decades of measurement expertise with a broad selection of workshop-grade layout tools, making high accuracy accessible for industry and trade. With over 48,000 customers and a central quality hub in Emmerich, Metav provides a dependable supply of dividers, scribing compasses and measuring dividers that reduce supplier complexity and support continuous production.
Key takeaway
For reliable pre‑machining layout, dividers and associated scribing and height-measuring tools ensure exact geometry transfer, minimising waste and streamlining shopfloor processes.
FAQ
What types of dividers are best for heavy-duty steel layout?
For heavy-duty steel layout, choose measuring dividers or point dividers with hardened points and robust joints; these designs keep measurements fixed under repeated use and produce clear scribe lines on hardened surfaces.
Can digital height gauges be integrated into quality documentation?
Yes. Digital height gauges in this range offer high resolution and data interfaces that allow direct transfer of measured values for tolerance checks and traceable quality records.
How do scribing compasses differ from standard compasses?
Scribing compasses are built for industrial use: they feature hardened tips, stable joints and fine-adjust mechanisms, unlike lightweight drawing compasses intended for paper or light materials.
Are there solutions for quick re‑setting during batch work?
Measuring dividers with quick-clamp fine adjustments enable fast, repeatable re‑setting, reducing downtime between consecutive parts without sacrificing precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com