300mm Outside Micrometer Set 12-Piece Ratchet Stop Calibrated ISO 17025 Certificate Included - Microtech Metrology
€1,190.00
Product information "300mm Outside Micrometer Set 12-Piece Ratchet Stop Calibrated ISO 17025 Certificate Included - Microtech Metrology"
Benefit from the combination of high accuracy, a ratchet stop for repeatable contact force and an included ISO 17025 calibration certificate to secure traceable results. The twelve-piece micrometer set covers the full 0–300 mm workshop range and is available through Metav Werkzeuge — contact the specialists for tailored advice.
Microtech Metrology Outside Micrometer Set — 0–300 mm, Ratchet Stop, ISO 17025
A Microtech Metrology micrometer set for precision external measurement, optimised for workshop inspection, production control and quality assurance
- Ratchet-stop micrometer heads for repeatable force
- ISO 17025 calibration certificate included
- Twelve-piece set covering 0–300 mm range
- High-accuracy analogue reading with 0.01 mm scale
Consistent measurement quality through controlled contact force
The set uses ratchet stop micrometer heads to ensure a consistent measuring force, which reduces operator-induced variation and improves repeatability. The analogue 0.01 mm reading provides clear, mechanical feedback suitable for production benches and inspection stations. With an anvil Ø6.5 mm, contact stability is improved across standard workpieces, so dimensional checks become faster and more reliable while maintaining the required technical rigour.
A practical standard range for machine and metalwork
Designed as a standard workshop solution, the set spans 0–300 mm, covering the most common external measurement tasks in machining and fabrication. The twelve-piece set ensures continuous coverage across small to medium components without frequent tool changes. These lengths balance reach and stiffness, delivering steady handling and single-handed operation where tight tolerances are required on shafts, housings and fittings.
Traceable calibration for quality systems and audits
Each instrument is supplied fully calibrated with an ISO 17025 calibration certificate, providing documented traceability and confidence for internal audits and supplier control. The certificates record the calibration status at delivery, simplifying integration into quality management systems and reducing administrative follow-up. This level of traceability supports conformity assessments and helps maintain measurement integrity across production runs.
Robust analogue construction for everyday use
The mechanical design emphasises longevity and shop-floor robustness: simple, serviceable components and a tactile scale mean fewer electronic failure modes and effortless routine checks. The analogue concept pairs well with harsh environments and keeps measurement workflows straightforward. Supplied as a matched set, the tools are convenient for inspection benches and tooling rooms where dependable, fast external measurement is essential.
Choose Microtech Metrology precision for dependable dimensional control and contact Metav Werkzeuge in Emmerich for ordering and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 110110311
- GTIN: 4061905458934
- Manufacturer: Microtech Metrology
- Range: 0–300 mm
Facts
- Measuring range min: 0 mm
- Measuring range max: 300 mm
- Reading / Graduation: 0.01 mm
- Pieces per set: 12
Special features
- Ratchet stop
- Analogue display
- ISO 17025 calibration certificate included
- Outside measurement tool
- Anvil Ø6.5 mm
- Set of twelve micrometers
FAQ
What measuring range does the set cover? The twelve-piece micrometer set from Microtech Metrology covers a continuous range from 0–300 mm (SKU 110110311), providing full external measurement capability for common workshop tasks.
Is the set delivered calibrated and traceable? Yes — the instruments are supplied fully calibrated with an ISO 17025 calibration certificate, confirming traceability and suitability for quality-assurance systems.
What advantage does the ratchet stop provide? The ratchet stop secures a consistent measuring force for each contact, improving repeatability and reducing variation caused by differing operator pressure when using the micrometer set.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools