101mm Morse Taper MK2 To B10 Arbor Hardened And Ground, DIN 238 - TECWERK
Take advantage of the DIN 238 standard for reliable chuck mounting and the fully hardened and ground finish to reduce runout and extend service life; order directly via Metav Werkzeuge or consult our specialists for technical advice and fast supply. MT2 x B10 taper arbor, hardened & ground (101 mm) — TECWERK A MT2 x B10 taper arbor designed for secure mounting of standard drill chucks on drilling and turning machines DIN 238 taper for standard drill chucks Fully hardened and ground Overall length 101 mm Accurate chuck seating for machining stability The precision-engineered taper ensures a repeatable, rigid connection between chuck and spindle, improving the concentricity of mounted tools and reducing costly rework. Conforming to DIN 238 and delivered in the common MT2 configuration, this taper arbor gives a stable mechanical interface with standard drill chucks and tailstock arrangements. The standardised shank reduces variability between setups, which supports consistent machining tolerances and predictable production output. Robust finish lowers maintenance intervals A hardened and ground surface significantly improves resistance to wear and fretting at the contact surfaces, which translates into longer service life and fewer interruptions. The combination of surface treatment and precise machining reduces the need for frequent replacement or adjustment, delivering tangible savings in machine uptime and tool-handling effort. This robust construction is particularly suited to workshops and production lines where reliability and repeatability are essential. Compact design for straightforward integration With an overall length of 101 mm, the arbor balances compactness and accessibility for routine chuck changes and inspection. The B10 mounting interface accommodates common drill chuck fittings, while the MT2 shank integrates seamlessly with many drill- and turning-machine tailstocks and spindles, enabling flexible use across different setups. The simple, standard format helps to streamline tool inventories and makes the component easy to stock and replace within an organised workshop environment. For tailored technical guidance or to secure this TECWERK MT2 taper arbor with reliable delivery from Metav Werkzeuge, contact our specialists in Emmerich for expert advice and rapid supply Technical Data Article number: 2000832318NW Standard: DIN 238 Manufacturer: TECWERK Product type: Taper arbor Shank / taper: MT2 x B10 Overall length: 101 mm Facts Overall length: 101 mm Packaging unit: 1 SKU: 2000832318NW Special features DIN 238 taper for drill chucks Fully hardened and ground finish Suitable for drill and turning machines Designed for secure chuck mounting FAQ Which taper standard does this arbor use? The arbor uses the DIN 238 taper form with an MT2 shank suitable for standard drill chucks. Can this arbor accept standard drill chucks? Yes, the B10 mounting interface on the TECWERK taper arbor is intended for standard drill chucks in accordance with DIN 238. Is the surface treated for high wear resistance? The TECWERK MT2 x B10 taper arbor is fully hardened and ground to improve wear resistance and maintain concentricity under regular use. What is the overall length and packaging unit? The arbor has an overall length of 101 mm and is supplied as a single unit (packaging unit: 1); SKU 2000832318NW identifies the exact item. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
105mm Morse Taper MT2 Live Centre With B12 Arbor, Hardened And Ground - TECWERK
Take advantage of the combination of proven DIN 238 compatibility, a Morse taper MT2 fit and a fully hardened and ground finish for reliable chuck mounting and low runout; order directly via Metav Werkzeuge or ask the technical consultants for tailored advice. Taper arbor MT2 to B12, hardened & ground, L 105 mm — TECWERK The Taper arbor MT2 to B12 is a hardened, ground arbor for secure mounting of drill chucks on drill presses and lathes, compliant with DIN 238. MT2 taper for standard drill spindles DIN 238 drill-chuck shank compatibility Fully hardened and ground for durability 105 mm overall length for stable mounting Precision fit for consistent machining The Taper arbor MT2 to B12 provides a close, repeatable fit between machine spindle and chuck thanks to the Morse taper MT2 geometry and conformity to DIN 238. The hardened and ground finish maintains concentricity, reducing radial runout that otherwise degrades hole quality. For production and workshop environments this results in fewer reworks and a higher first-pass yield, as stable clamping directly benefits drilling accuracy and tool life. Versatile mounting that speeds up set-up Designed for straightforward use on both drill presses and turning centres, the arbor accepts standard drill chucks with B12 shanks and enables quick changeovers between chucked tooling and tapered tooling. The DIN 238 specification denotes a standardised chuck-shank interface, simplifying tooling choices across machines. In practical terms this means shorter downtime and more predictable workflow for toolrooms and maintenance shops that require reliable chuck attachment. Robust construction for dependable service life Manufactured in a hardened and ground execution, the arbor resists wear while preserving seating accuracy over repeated use. The 105 mm overall length offers a balance between compactness and stable support, minimising bending moments during operation. The combination of hardened surface treatment and precision grinding supports long-term durability and low maintenance, making this component a practical, resilient choice for everyday workshop demands. Contact Metav Werkzeuge in Emmerich for precise matching, quick supply and expert technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832322NW Product: Taper arbor Brand: TECWERK Standard: DIN 238 Shank reception: B12 Outer taper: MT2 Overall length: 105 mm Facts Norm: DIN 238 Overall length: 105 mm Outer taper size: MT2 Packaging unit: 1 SKU / UID: 2000832322NW Special features With drill-chuck taper to DIN 238 Fully hardened and ground For mounting drill chucks on drill and turning machines Execution: hardened and ground FAQ Which machines are compatible with this taper arbor? The taper arbor MT2 to B12 (TECWERK, article 2000832322NW) fits machines with a Morse taper MT2 spindle and is intended for use where B12 drill-chuck shanks are required, such as drill presses and lathes. Is the arbor suitable for precision drilling tasks? Yes, the TECWERK arbor is hardened and ground to preserve seating accuracy and reduce runout, making it suitable for precision drilling when combined with a quality drill chuck. What does DIN 238 mean for chuck compatibility? DIN 238 specifies the dimensions and taper for drill-chuck shanks, so a B12 shank to DIN 238 will seat correctly in this arbor and ensure standardised compatibility. How does the overall length affect performance? The 105 mm overall length provides stable support and a compact profile that reduces overhang, helping to minimise bending forces and maintain concentricity during operation. Can the arbor be used with keyless and keyed chucks? The arbor accepts drill chucks with a B12 taper per DIN 238, which includes both keyed and keyless chucks provided the chuck shank conforms to the same standard and the chuck itself offers the required precision. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
112mm MT2 Taper Arbor With B16 Chuck Mount, Hardened And Ground DIN 238 - TECWERK
Take advantage of the combination of MK2 taper, B16 drill-chuck shank and a fully hardened and ground finish for consistent concentricity and long service life. The compact 112 mm length ensures straightforward integration into standard drilling and turning machines. Order the taper arbor directly via Metav Werkzeuge or ask our consultants if additional technical data is required. Taper arbor MK2 x B16, hardened and ground – TECWERK The TECWERK taper arbor MK2 x B16 for secure drill-chuck mounting on drilling and turning machines, compliant with DIN 238 and finished hardened and ground for repeatable precision MK2 taper with B16 drill-chuck shank Conforms to DIN 238 for interchangeability Fully hardened and ground for durability Designed for drill and lathe chuck mounting Secure mounting for consistent concentricity and repeatable results The arbor is engineered as a purpose-built solution for mounting drill chucks on both drilling and turning machines. The combination of the MK2 taper on the outer cone and the B16 drill-chuck shank provides a standardised interface that simplifies tool changes and maintains axial and radial run-out within tight tolerances. Because the shank is hardened and ground, wear is minimised and concentricity remains stable over extended use, reducing the need for frequent re-alignment and preventing scrapped workpieces. Fast compatibility with common machine spindles and chucks Conformity with DIN 238 ensures the arbor mates reliably with established drill-chuck tapers and machine spindles, promoting cross-machine compatibility across a workshop. The compact 112 mm overall length makes the component easy to handle and fit in confined setups while still providing sufficient engagement to secure the chuck. The result is a predictable interface that lowers setup time and increases productive machining time. Robust construction that reduces downtime and maintenance By specifying a fully hardened and ground finish, the arbor resists deformation and abrasion under repeated insertion and removal cycles. This durability translates into fewer replacements and lower lifetime costs for the tooling inventory. The robust surface treatment also makes the component less sensitive to small contamination, so cleaning intervals can be extended without compromising safety or performance. Practical handling and workshop benefits The straightforward geometry and standardised tapers mean the arbor is quick to inspect and easy to replace if required. Its design focuses on the essential workshop needs: reliable clamping of drill chucks, predictable run-out, and durable contact surfaces. Combined with the technical documentation reference DIN 238, the arbor provides a clear specification for purchasing, inventory management and machine setup procedures. For procurement or technical advice regarding the TECWERK MK2 x B16 taper arbor, contact Metav Werkzeuge for precise delivery and application guidance – phone +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data Article number: 2000832326NW Standard: DIN 238 Shank connection: B16 Outer taper: MK2 Overall length: 112 mm Manufacturer: TECWERK Product type: Taper arbor Additional information: with drill-chuck taper DIN 238 · fully hardened and ground · for mounting drill chucks on drilling and turning machines · Execution: hardened and ground Core specifications Taper size: MK2 Drill-chuck shank: B16 Length: 112 mm Compliance: DIN 238 Materials & features Hardened and ground finish For drill and lathe chuck mounting Standardised interface for interchangeability FAQ What machines is this taper arbor compatible with? The TECWERK taper arbor MK2 x B16 is designed for use with drilling and turning machines that accept an MK2 outer taper and a B16 drill-chuck shank, following DIN 238 specifications. How does the hardened and ground finish benefit workshop use? A hardened and ground surface on the arbor reduces wear and maintains concentricity, which prolongs service life and minimises run-out-related rework when the arbor is used to mount chucks. Is this arbor compliant with any industry standard? Yes, the arbor conforms to DIN 238, ensuring compatibility with standard drill-chuck tapers and facilitating interchangeability across machines. Can the arbor be used with different drill chucks? Provided the drill chuck accepts a B16 taper, the arbor will accept it; the standardised interface supports a range of chucks designed to DIN 238. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
120mm Tapered Arbor MK2 to B18 Hardened And Ground With Drill Chuck Taper DIN 238 - TECWERK
Take advantage of the DIN 238 drill-chuck taper and the fully hardened and ground construction for consistent concentricity; the compact 120 mm length keeps the toolstack tidy and reduces overhang. Order the taper arbor directly via Metav Werkzeuge or consult the team for application advice. Taper arbor MT2 to B18 (TECWERK) — Morse taper to B18 drill-chuck adaptor, hardened and ground A taper arbor MT2 to B18 designed to accept drill chucks on drilling and turning machines and to ensure repeatable, standardised mounting. DIN 238 drill chuck taper Morse taper MT2 external taper Fully hardened and ground Total length 120 mm Accurate chuck mounting for repeatable machining The arbor is manufactured to the DIN 238 taper specification, providing a standardised interface between machine spindle or tailstock and the drill chuck. With an external Morse taper (MT2) on the shaft and a B18 receptacle for drill chucks, the component offers precise axial and radial location that reduces run-out. This reliable seating translates into improved hole quality and less time spent on rework, making the arbor a practical choice for tasks where concentricity matters. Robust construction that extends service life Constructed fully hardened and ground, the shaft resists wear from repeated insertions and removals, which preserves the fit and accuracy over prolonged use. The heat-treated surface hardness and the ground finish improve contact behaviour and reduce fretting, so maintenance intervals are extended and downtime is minimised. The 120 mm total length provides a compact profile that limits overhang while maintaining sufficient reach for common drilling operations. Straightforward integration into workshop workflows The taper adapter accepts chucks with a B18 shank and seats into any compatible MT2 receptacle, enabling fast retrofits and interchange between drilling and turning machines. Conformity with DIN standards simplifies spare-part planning and ensures compatibility across suppliers. The design is suitable for routine workshop use where secure chuck mounting and quick tool changes support efficient production and flexible tooling setups. For TECWERK quality and dependable chuck mounting solutions, contact Metav Werkzeuge in Emmerich for order placement and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832328NW Norm: DIN 238 Manufacturer: TECWERK Product type: taper arbor Data Total length: 120 mm Packaging unit: 1 External taper: MT2 Special features DIN 238 drill chuck taper (B18) Fully hardened and ground throughout For acceptance of drill chucks on drilling and turning machines External Morse taper MK2 (MT2) Shank / reception: B18 FAQ What machines is this taper arbor compatible with? The arbor fits into spindles or tailstocks with an MT2 receptacle and accepts drill chucks with a B18 shank, making it suitable for many drilling and turning machines that use these standard tapers. What does conformity to DIN 238 mean for everyday use? Conformity to DIN 238 indicates a standardised drill-chuck taper interface, so the arbor ensures interchangeability and predictable seating when mounting drill chucks designed to the same norm. How does the hardened and ground finish benefit workshop operations? The fully hardened and ground surface improves wear resistance and maintains accurate seating over many cycles, which reduces maintenance and helps sustain drilling precision in daily production. Is the arbor suitable for precision assembly and small-series production? Yes — the arbor’s standardised tapers and controlled finish provide repeatable concentricity, making it appropriate for precision assembly tasks and small-series manufacturing where consistent chuck alignment is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
124mm MT3 Taper Arbor With B12 Shank, Hardened And Ground, DIN 238 - TECWERK
The combination of a Morse taper 3 (MK3) seating and a B12 drill‑chuck arbor, together with a fully hardened and ground finish and a compact overall length of 124 mm, delivers secure mounting and long service life for routine workshop tasks; order via Metav Werkzeuge or consult their technical advisors for specification matching. Taper arbor MK3×B12, hardened and ground – TECWERK A taper arbor MK3×B12 designed for secure mounting of drill chucks on drilling and turning machines, compliant with DIN 238 and finished for consistent concentricity MK3 taper to DIN 238 standard B12 arbor for drill‑chuck mounting Fully hardened and ground construction 124 mm overall length for stable clamping Secure mounting for reliable machining The MK3 taper conforms to DIN 238, providing a standardised interface that ensures repeatable seating and low run‑out when used with compatible drill chucks. By combining the MK3 taper with a B12 arbor bore, the component creates a direct mechanical link between spindle and chuck, improving precision in hole‑making operations. This results in reduced rework and steadier tool behaviour during both drilling and light turning tasks, a rational advantage for workshops that prioritise measurable process stability. Durability that reduces downtime Manufactured in a fully hardened and ground execution, the arbor resists wear at the critical contact surfaces and preserves concentricity over extended service. The hardened finish limits fretting and deformation under repeated mountings, while the ground surface promotes accurate seating. Taken together, these properties extend maintenance intervals and contribute to predictable tooling performance, supporting efficient production flows in industrial and trade environments. Compatibility and practical workshop use With an overall length of 124 mm, the arbor offers compact handling and easy incorporation into existing setups. The design accepts standard drill chucks and is suitable for installation in drilling machines and lathes equipped to receive a Morse taper 3 spindle. The adherence to DIN 238 guarantees interchangeability with other standardised tooling, simplifying procurement and inventory management for maintenance departments and small workshops alike. The straightforward mechanical nature of the arbor makes it a practical, reliable choice for routine chuck mounting tasks. For reliable chuck mounting choose the TECWERK taper arbor and order through Metav Werkzeuge for fast delivery and technical assistance; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832332NW Standard: DIN 238 Manufacturer: TECWERK Product type: Taper arbor Facts Overall length: 124 mm Taper: MK3 (Morse taper 3) Arbor bore: B12 Special features Drill‑chuck taper to DIN 238 Fully hardened and ground For acceptance of drill chucks on drilling and turning machines Execution: hardened and ground FAQ Which machines is the taper arbor suitable for? The taper arbor MK3×B12 is intended for use on drilling machines and lathes that accept a Morse taper 3 spindle and is designed to receive standard drill chucks for general workshop applications. How is the arbor mounted and secured? Mount the MK3 taper into the spindle taper; the B12 arbor bore accepts the drill‑chuck mounting. The precise fits and DIN 238 conformity ensure stable seating and minimised run‑out for the chuck assembly. What benefit does the hardened and ground finish provide? The fully hardened and ground surface increases wear resistance at seating and contact zones, preserving concentricity and extending the service life of the arbor under frequent use. Is the arbor suitable for precision drilling tasks? Yes, the arbor’s standardised MK3 taper and careful finishing deliver the concentricity and secure clamping required for precise hole‑making with standard drill chucks. Does the arbor meet international standards for interchangeability? Compliance with DIN 238 ensures compatibility with other tooling produced to the same standard, simplifying replacement and integration into existing tool inventories. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
131mm MK3 x B16 Taper Arbor Hardened And Ground With DIN 238 Drill Chuck Mount - TECWERK
Take advantage of the combination of precision, robust toolholding and straightforward compatibility to maintain consistent machining tolerance and minimise unplanned downtime; order the taper arbor directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK taper arbor MT3 to B16 — hardened and ground, 131 mm TECWERK taper arbor MT3×B16, designed for reliable mounting of drill chucks on drilling and turning machines Drill-chuck taper DIN 238 compatible Fully hardened and ground finish Morse taper MT3 external taper For mounting drill chucks on lathes and drills Precision toolholding to boost machining accuracy This taper adaptor delivers precise concentricity and consistent runout control by combining a Morse taper MT3 external taper with a matched B16 shank interface. The adherence to DIN 238 for the drill-chuck taper ensures compatibility with common chucks, translating into repeatable hole positions and reduced scrap rates. For production environments where dimensional consistency is critical, the adaptor provides a measurable improvement in process stability and setup repeatability. Durable construction that reduces maintenance intervals Constructed in a fully hardened and ground execution, the arbor resists wear at contact surfaces and maintains seating accuracy over prolonged use. The heat treatment and finishing process minimise fretting and micro-movements between taper surfaces, lowering the frequency of regrinding or replacement. Workshops benefit from fewer interruptions and predictable maintenance cycles, which supports higher machine availability and lower total cost of ownership. Seamless compatibility for quick integration into existing fleets The arbor is engineered to accept standard drill chucks via the DIN 238 chuck taper and mates with machines using a Morse taper MT3 nose. The B16 shank provides a conventional connection for many drill and lathe tailstocks or spindle noses, so adaptation is straightforward and does not require special fixtures. This compatibility shortens setup times and simplifies tooling logistics across small-batch and serial production. Practical advantages for workshop and toolroom workflows For metalworking shops, maintenance departments and toolrooms, the adaptor supports flexible toolholding strategies: exchange chucks quickly, perform bench-mounted drilling or transfer operations between machines with minimal rework. The robust finish and standard interfaces make it suitable for repetitive use in production and for demanding reaming or drilling tasks. If questions arise about suitability for a particular machine or chuck, technical consultation is recommended to confirm fit and function. For reliable toolholding with proven compatibility, choose the TECWERK taper arbor — contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832336NW Manufacturer: TECWERK Product type: Taper arbor Facts Overall length: 131 mm Taper: Morse taper MT3 Shank: B16 Standard: DIN 238 Package unit: 1 Special features With drill-chuck taper DIN 238 Fully hardened and ground For mounting drill chucks on drilling and turning machines Hardened and ground execution FAQ What taper standard does the arbor use? The arbor uses a Morse taper MT3 external taper for spindle seating and a B16 shank interface to mate with conventional machine fittings. Is the arbor suitable for mounting drill chucks? Yes, the arbor is designed to receive drill chucks via the DIN 238 chuck taper; the chuck itself is not included. How does the hardened and ground finish benefit workshop use? The hardened and ground surfaces maintain seating accuracy, reduce wear and limit fretting, which extends service life and preserves concentricity during repeated mountings. Which machines can use this taper arbor? The unit is intended for drilling and turning machines that accept Morse taper MT3 spindles and a B16 shank connection; compatibility depends on the machine’s spindle or arbor configuration. Can the arbor be used in precision production environments? Yes, by combining MT3 taper geometry with the DIN 238 chuck taper and a hardened finish, the arbor supports precision toolholding suitable for controlled production processes. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
139mm Morse Taper MT3 Collet Arbor Hardened And Ground With B18 Shank, DIN 238 - TECWERK
Benefit from a hardened, ground MT3–B18 taper arbor that complies with DIN 238 and measures 139 mm overall — combining a secure chuck fit with durable construction for consistent machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. MT3–B18 taper arbor — hardened and ground with DIN 238 drill‑chuck taper (TECWERK) The MT3–B18 taper arbor is a hardened, ground arbor designed to accept drill chucks on drilling and turning machines, offering a precision interface for reliable toolholding. DIN 238 drill-chuck taper Hardened and ground finish MT3 shank with B18 reception Secure, low‑runout mounting for accurate machining The design provides a Morse taper (MT3) interface mated to a B18 reception, giving a rigid and concentric connection between machine spindle and chuck. A correctly fitted taper arbor reduces runout and vibration, which directly improves hole quality and tool life. For users unfamiliar with the term, runout describes the deviation of the rotating axis from true centre; minimising it prevents uneven wear and poor surface finish. The hardened, ground surfaces ensure a repeatable, tight fit that aids in maintaining precision across repeated mounting cycles. Broad compatibility with standard drill chucks and machines Compliance with DIN 238 means the taper conforms to the recognised drill‑chuck standard, simplifying selection and ensuring compatibility with commonly used chucks. The arbor’s MT3 shank is suitable for machines accepting Morse taper shanks and, via the B18 reception, accepts Jacobs‑style drill chucks for a secure union. This combination offers practical flexibility in workshops that use both drill presses and toolroom lathes, enabling straightforward interchange of chucks without modification. The clear standardisation reduces downtime and supports predictable tool setup. Built to last: hardened and ground for dependable workshop use Manufactured with a focus on durability, the arbor is hardened and ground to resist wear and maintain concentricity over time. This robust construction reduces the need for frequent replacement and supports steady production schedules. In routine use, simple cleaning and correct withdrawal methods will preserve the taper condition; light lubrication of the contact faces during storage avoids corrosion without impairing the fit. The result is a component that contributes to lower maintenance needs and dependable everyday performance on the shopfloor. Contact Metav Werkzeuge today for tailored technical advice or to request a quotation; reliable supply direct from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832338NW Manufacturer: TECWERK Product type: Taper arbor Label: Kegeldorn MK3xB18 geh.u.geschl.Gesamt-L.139mm TECWERK Facts Total length: 139 mm Shank taper: MT3 Reception: B18 Standard: DIN 238 Packaging unit: 1 Special features With drill‑chuck taper DIN 238 Ganz gehärtet und geschliffen (hardened and ground) For acceptance of drill chucks on drilling and turning machines Execution: hardened and ground FAQ Which machines are suitable for this taper arbor? The MT3–B18 taper arbor by TECWERK is intended for drilling machines and lathes that accept a MT3 shank; its B18 reception takes standard drill chucks. Does the arbor comply with any standards? Yes — the arbor features a drill‑chuck taper according to DIN 238, ensuring compatibility with chucks manufactured to that standard. How does the arbor affect machining accuracy? Using this hardened and ground arbor reduces runout and vibration, which improves hole quality and extends drill bit life compared with less precise toolholding options. Is specialised maintenance required? Routine cleaning and light protection against corrosion are sufficient; the hardened and ground finish is designed for longevity under normal workshop conditions. What is the article number for ordering or reference? The article number (SKU) is 2000832338NW for the TECWERK MT3–B18 taper arbor. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
147mm Morse Taper MT3 Taper Shank With B22 Drill Chuck Mount, Hardened And Ground - TECWERK
Benefit from the secure fit of an MT3 taper combined with the B22 drill‑chuck interface and the durability of a fully hardened and ground finish; this combination reduces runout and supports consistent tool performance. Improve machine uptime and minimise rework by specifying the DIN‑conforming arbor. Order the taper arbor directly via Metav Werkzeuge or request technical advice from our consultants. Taper arbor MT3×B22 (TECWERK) — DIN 238, hardened and ground, 147 mm Taper arbor MT3×B22 for accepting drill chucks; designed for drill and turning machines with a DIN 238 drill‑chuck interface DIN 238 drill‑chuck taper B22 Morse taper MT3 external shank Fully hardened and precision ground Suitable for drill and turning machines Proven precision for reduced runout and consistent results A defined taper fit is the basis for rotational accuracy in machining. The MT3 external taper paired with the B22 drill‑chuck interface manufactured to DIN 238 provides a standardised seating that minimises micro‑movement. The hardened and ground finish lowers friction and limits elastic deformation during clamping, which in turn reduces runout and improves repeatability. These characteristics translate into fewer rejected parts and more predictable machining outcomes, particularly important for repetitive drilling operations and fine finishing tasks. Durable design that lowers maintenance needs Workshop applications demand components that resist wear and retain concentricity under repeated use. The arbor’s fully hardened and precision ground execution increases abrasion resistance and helps maintain retention force over prolonged service. Reduced wear means longer intervals between checks and regrinding, supporting continuous production schedules. In practical terms, the robust surface treatment protects both the arbor and the mounted drill chuck, contributing to lower total cost of ownership in a busy tooling environment. Compact dimensions for straightforward machine integration The Taper arbor MT3×B22 has an overall length of 147 mm, a form factor that suits a wide range of drill presses and turning centres while keeping overhang and imbalance low. Supplied as a single unit (packaging unit: 1), the arbor accepts Jacobs‑style chucks with the B22 taper and simplifies inventory management. The product is listed under SKU 2000832337NW for straightforward ordering and specification checks. For machine matching and balance considerations, consult technical notes to ensure optimal mounting and safe operation. For precision toolholding with a DIN‑conforming drill‑chuck interface, request the TECWERK MT3→B22 taper arbor via Metav Werkzeuge; Metav’s Emmerich team can advise on fit, delivery and workshop integration at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832337NW Product: Taper arbor Brand: TECWERK Standard: DIN 238 Core dimensions Taper (external): MT3 Chuck taper: B22 (DIN 238) Overall length: 147 mm Packaging unit: 1 Design and features Fully hardened and ground For the acceptance of drill chucks on drill and turning machines Execution: hardened and ground Suitable for Jacobs‑type chucks FAQ Is the arbor compatible with standard MT3 spindles? Yes. The arbor features an MT3 external taper designed for standard MT3 spindles and mates with B22 drill‑chuck fittings according to DIN 238. What does compliance with DIN 238 mean for the user? DIN 238 specifies the dimensions and tolerances for drill‑chuck tapers; conformity ensures interchangeability and predictable seating when using any B22‑compatible chucks with this arbor. How does the hardened and ground finish affect performance? The hardened and ground surface improves wear resistance and maintains concentricity, so the arbor preserves retention and reduces runout over many clamp cycles. Which machines is this arbor suitable for? The component is intended for drill presses and turning machines that accept MT3 external tapers and B22 drill‑chuck fittings; it is commonly used where Jacobs‑type chucks are mounted. What is the overall length and how is it supplied? Overall length is 147 mm and the item is supplied as a single unit (packaging unit: 1), referenced under SKU 2000832337NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
156mm Morse Taper MT4 Shank With B16 Drill Chuck Taper, Hardened And Ground - TECWERK
Take advantage of a hardened and ground taper arbor with DIN 238 drill‑chuck taper and MK4 external cone to ensure precise, repeatable chuck mounting; order directly via Metav Werkzeuge or consult our specialists for application advice. Kegeldorn MK4xB16 – Taper arbor, hardened and ground (TECWERK) The Kegeldorn MK4xB16 is a hardened and ground taper arbor designed for mounting drill chucks on drilling and turning machines, offering standardised compatibility with DIN 238 fittings. DIN 238 drill-chuck taper compatibility Fully hardened and ground finish Morse taper MK4 external cone Overall length 156 mm for deep reach Precision mounting that reduces runout and setup time The hardened and ground construction delivers a consistent seating surface that minimises radial runout and wobble when mounting a chuck. With the MK4 external cone and the B16 drill‑fitting interface, the arbor aligns to recognised workshop standards, enabling reliable transfer of torque and accurate concentricity. This precision reduces rework and shortens setup time on both drill benches and lathes, improving throughput without sacrificing component quality. Robust design for frequent use and long service life Manufactured in a fully hardened and ground execution, the taper arbor resists wear from repeated chuck changes and torque transmission, supporting repeatable performance across many cycles. The careful finishing preserves taper geometry, which prolongs the life of mating chucks and the machine spindle. For workshops that demand durability and consistent results, the resilient construction means fewer replacements and lower downtime over the tool’s service life. Simple integration, clear specification and safe handling The arbor’s DIN 238 drill‑chuck taper and clear shank specification (B16) make selection straightforward for maintenance and tooling departments; compatibility with standard chucks avoids custom adaptors. The overall length of 156 mm provides sufficient engagement for secure mounting while maintaining accessibility for tightening and release. Routine inspection of the taper face and light lubrication of contact surfaces are sufficient to keep performance within tolerance; where higher precision is required, the hardened and ground finish supports runout checks and calibration processes. For tailored application advice or to secure this TECWERK taper arbor for the workshop, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will confirm suitability and delivery options. Technical Data Article number: 2000832346NW Standard: DIN 238 Brand: TECWERK Product type: taper arbor Shank connection: B16 External cone: MK4 Overall length: 156 mm Facts Execution: fully hardened and ground Intended for mounting drill chucks Packaging unit: 1 Special features Drill‑chuck taper to DIN 238 Hardened and ground finish for wear resistance Suitable for drilling and turning machines FAQ What taper and shank does this arbor use? The taper arbor uses an MK4 external cone and a B16 shank interface, matching the DIN 238 drill‑chuck taper specification. Is the arbor suitable for repeated mounting and removal of chucks? Yes, the TECWERK taper arbor is fully hardened and ground, designed for repeated use while maintaining taper geometry and low runout. What is the overall length and how does it affect reach? The overall length is 156 mm, which offers increased reach for deeper mounting depths while preserving secure engagement. How does the hardened and ground finish benefit workshop accuracy? The hardened and ground finish ensures a uniform seating surface, reducing radial runout and improving repeatability when mounting chucks. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
164mm Morse Taper MT4 Tapered Arbor Hardened And Ground With Drill Chuck Taper DIN 238 - TECWERK
Take advantage of the hardened and ground construction together with a DIN 238 drill‑chuck taper for reliable chuck retention and long service life; the compact MT4 to B18 taper interface ensures straightforward integration into existing machine spindles. Order directly via Metav Werkzeuge or contact our advisors for compatibility guidance. Morse taper mandrel MT4 → B18 — hardened and ground, DIN 238 drill‑chuck taper (TECWERK) The Morse taper mandrel MT4 to B18 forms a precision interface for mounting drill chucks on drilling and turning machines, combining standardised taper geometry with a hardened, ground finish for consistent performance Morse taper MT4 shank DIN 238 drill‑chuck taper Hardened and ground finish 164 mm overall length Secure chuck mounting that keeps tools concentric The tapered interface delivers a precise mechanical fit, reducing run‑out and improving hole quality when using a mounted chuck. Fitted to a standard MT4 shank and finished to the DIN 238 drill‑chuck taper, this mandrel provides a repeatable connection between spindle and accessory. The result is consistent concentricity, which directly affects drilling accuracy and tool life; the hardened and ground surface minimises wear on both the mandrel and the mounted chuck, preserving alignment over many cycles. Robust construction for continuous workshop use Manufactured with a hardened and ground execution, the mandrel resists deformation and surface fatigue under regular load. The tough finish lowers the risk of fretting and galling where taper meets taper, extending the service interval of both accessory and spindle. For production environments and maintenance shops alike, that durability translates into predictable uptime and fewer interruptions for re‑alignment or replacement, supporting a smoother workflow on machining centres and bench machines. Clear compatibility and easy integration Engineered to accept drill chucks via the DIN 238 taper and to seat in an MT4 spindle, the component simplifies tool changeovers in mixed‑equipment shops. The male B18 fitting matches common spindle sockets, and the 164 mm overall length provides sufficient engagement without excessive overhang. For users unfamiliar with taper nomenclature: MT4 refers to Morse taper size 4, a widely adopted standard; DIN 238 specifies the drill‑chuck arbor form used to secure chucks by taper seating. This clarity helps reduce selection errors and ensures the mandrel integrates with existing tooling. Practical benefits for purchasing and workshop management Choosing a hardened taper mandrel reduces the need for frequent replacements and supports predictable process outcomes—an economic advantage over time for high‑volume or precision work. The standardised interfaces mean spare parts and mounted chucks remain interchangeable across machines, simplifying stockkeeping and reducing the variety of components in the toolroom. Where installation or fitment questions arise, Metav Werkzeuge’s product information and technical team can advise on compatibility and best practice for mounting and maintenance. For reliable chuck retention and long service life, order the TECWERK MT4→B18 taper mandrel via Metav Werkzeuge or contact Metav Werkzeuge’s advisors at info@metav-werkzeuge.com / +49 2822 7131930 to confirm fitment and application suitability Technical data SKU: 2000832348NW Standard: DIN 238 Brand: TECWERK Product type: Taper mandrel Facts Overall length: 164 mm Packaging unit: 1 Special features Morse taper: MT4 Spindle fitting: B18 Drill‑chuck taper: DIN 238 Execution: hardened and ground Application: for mounting drill chucks on drilling and turning machines FAQ What spindles is the mandrel compatible with? The mandrel is designed to seat in an MT4 taper and to accept a drill chuck via the DIN 238 drill‑chuck taper; compatibility should be checked against the machine spindle and chuck arbor dimensions. Is the mandrel suitable for heavy production use? Yes, the hardened and ground execution provides enhanced wear resistance, making the mandrel suitable for regular workshop and light production environments. How does DIN 238 affect chuck selection? DIN 238 defines the taper form for drill chucks; selecting a chuck with a matching DIN 238 arbor ensures a secure, concentric fit when mounted on the mandrel. Can the mandrel reduce run‑out compared with non‑taper adapters? A precision tapered seat such as MT4, when properly fitted, offers improved concentricity and repeatability compared with loose or improvised adapters, resulting in lower run‑out. Which SKU identifies this item for ordering? This item is listed under SKU 2000832348NW and is the TECWERK taper mandrel MT4→B18 designed for DIN 238 drill‑chuck seating. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
188mm Morse Taper MT5 to B16 Taper Shank, Hardened and Ground, DIN 238 - TECWERK
Take advantage of a hardened, ground taper arbor that meets DIN 238 for secure drill-chuck mounting and consistent concentricity; the combination of Morse taper MT5 and B16 arbor fit ensures compatibility with common drilling and turning machines. Order directly via Metav Werkzeuge or contact their consultants for bespoke integration advice. Taper arbor MT5 to B16 (hardened & ground) — TECWERK The Taper arbor MT5 to B16 is a hardened and ground adaptor for mounting drill chucks on drilling and turning machines, compliant with DIN 238 for precise chuck seating. Morse taper MT5 to B16 fit Hardened and ground for wear resistance Drill-chuck taper to DIN 238 compliance Precise seating that reduces runout and rework A correctly matched taper interface is critical for hole quality; the hardened and ground Morse taper ensures a concentric connection between spindle and chuck. This taper arbor converts the MT5 spindle taper to a B16 arbor fit, providing a stable bearing surface for drill chucks and reducing radial runout. The result is repeatable accuracy in drilling tasks, fewer scrap parts and less time spent on rework, which directly supports consistent production throughput. Built for long service and low maintenance Heat-treated and finished by grinding, the arbor’s surface hardness and dimensional stability deliver improved resistance to wear and fretting. The hardened and ground execution minimises micro-movement at the contact faces, which reduces vibration and extends both chuck and spindle life. For workshops aiming to maintain uptime, this robustness translates into lower routine maintenance and dependable daily performance. Easy integration with standard chucks and machines Compliance with DIN 238 means compatibility with standard drill-chuck tapers, simplifying tool selection and inventory. Installation into machines with an MT5 spindle is straightforward: the arbor seats directly into the spindle taper and presents the B16 arbor for the chuck. This familiarity speeds fitment and reduces the chance of mismatched tooling, making it suitable for production floors, job shops and maintenance workshops that rely on standardised interfaces. A practical choice for reliable workshop performance Selecting a hardened MT5-to-B16 arbor from a recognised supplier balances technical reliability with everyday usability. The simple geometry and standard conformance mean it fits existing systems without modification, while the hardened finish sustains accuracy over prolonged use. Procured through Metav, purchasers also benefit from a supplier network that emphasises quality control and dependable logistics, supporting seamless replenishment and fewer supply interruptions. For tailored advice on integrating this MT5-to-B16 taper arbor into a specific machine setup, contact Metav Werkzeuge in Emmerich by phone or email to speak with a precision specialist Technical data Article number: 2000832343NW Standard: DIN 238 Manufacturer: TECWERK Product type: Taper arbor Arbor fit: B16 Outer taper: MT5 Total length: 188 mm Packaging unit: 1 Facts Total length: 188 mm Outer taper designation: MT5 Arbor fit designation: B16 Standard conformity: DIN 238 Special features Hardened and ground finish For mounting drill chucks on drilling and turning machines Drill-chuck taper to DIN 238 Execution: hardened and ground FAQ What machines is this taper arbor suitable for? The taper arbor MT5 to B16 from TECWERK is designed for drilling and turning machines with an MT5 spindle and accepts chucks that fit a B16 arbor. Does the arbor comply with any standards? Yes, the product is manufactured to DIN 238, ensuring compatibility with standard drill-chuck tapers. How does the hardened and ground finish benefit workshop use? The hardened and ground execution reduces wear and fretting, improving concentricity and extending the service life of both the arbor and attached chuck. What is the article number for ordering or reference? The SKU for this taper arbor is 2000832343NW and the product is listed under TECWERK. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
196mm Morse Taper MT5 Shank With B18 Drill Chuck Mount, Hardened And Ground - TECWERK
Take advantage of a robust combination of MT5 taper fit, DIN 238 drill‑chuck compatibility and a fully hardened and ground finish for secure, repeatable chuck mounting; order the taper arbor directly via Metav Werkzeuge or consult the team for application advice. Taper arbor MT5 × B18 — hardened MT5 taper with DIN 238 drill‑chuck shank (TECWERK) Taper arbor MT5 × B18 provides a precise mounting solution for drill chucks on drilling and turning machines, optimised for repeated setups and secure toolholding. Taper MT5 for reliable chuck mounting DIN 238 drill-chuck shank compatibility Fully hardened and precision ground 196 mm overall length for extended reach Secure connection for consistent toolholding The MT5 taper construction ensures a firm mechanical interface that reduces radial runout and improves repeatability during serial operations. Because the arbor is supplied with a DIN 238 drill‑chuck shank, it directly accepts standard chucks, eliminating adaptors and saving setup time. This direct mount reduces spindle wear and supports consistent hole quality across batches, which is particularly important in production environments where each minute of downtime has a cost. Reduced setup time through precise finish A fully hardened and ground shaft provides a uniform contact surface that promotes accurate seating in the machine spindle and chuck. The precision finish lowers the need for frequent recalibration and minimises micro‑movement under load, so cycle times stay predictable and rework is less likely. For workshops that run mixed operations on drills and lathes, the arbor's compatibility and finish contribute to a measurable improvement in operational efficiency and component consistency. Durable design for everyday industrial use Built for routine use in machining environments, the taper arbor offers robust service life thanks to its hardened construction and precision grinding. The 196 mm overall length gives extended reach for deeper setups without compromising stability. Combined, these attributes deliver long‑term reliability and fewer tool changes, supporting uninterrupted workflows and a steady production rhythm that benefits both maintenance planning and throughput. For dependable chuck mounting with the TECWERK MT5 taper arbor and tailored application advice, contact Metav Werkzeuge for professional guidance and prompt supply from Emmerich Technical Data Article number: 2000832344NW Product: Taper arbor Manufacturer: TECWERK Standard: DIN 238 Facts Taper: MT5 Shank connection: B18 Overall length: 196 mm Special features With drill‑chuck shank DIN 238 Fully hardened and ground For mounting drill chucks on drilling and turning machines FAQ What taper and shank does the arbor use? The taper arbor uses an MT5 taper and a B18 shank designed for drill chucks with DIN 238 compatibility. Can this arbor accept standard drill chucks directly? Yes. The arbor is supplied with a DIN 238 drill‑chuck shank, so standard chucks fit directly without additional adapters. Is the surface treatment suitable for heavy duty use? The shaft is fully hardened and precision ground, providing a wear‑resistant contact surface suited to regular industrial application. What is the overall length and how does that affect setup? The overall length is 196 mm, offering greater reach for deeper set‑ups while maintaining stable seating and toolholding. Which product reference should be quoted when ordering or enquiring? Please quote the article number 2000832344NW and the designation taper arbor MT5 × B18 when contacting sales or technical teams. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
90mm MK1 Taper Shank With B12 Drill Chuck Mount, Hardened And Ground - TECWERK
Take advantage of a DIN 238 drill‑chuck taper with a true‑to‑size MK1 taper and a B12 chuck mount in one compact arbor; the hardened and ground finish ensures repeatable seating and long service life. Order the taper arbor directly via Metav Werkzeuge or consult the technical advisers for compatibility checks and fast delivery. Taper arbor MK1 x B12, hardened and ground – 90 mm (TECWERK) Taper arbor MK1 x B12, hardened and ground, for drill‑chuck mounting on drill and lathe spindles DIN 238 drill‑chuck taper Hardened and ground seating For drill and lathe chuck mounting Overall length 90 mm Precise seating for accurate drill‑chuck mounting The taper arbor provides a controlled interface between machine spindle and chuck: the MK1 taper mates to standard Morse‑taper spindles while the B12 bore accepts a matching drill chuck taper. Conformance to DIN 238 guarantees dimensional compatibility with common chucks and spindles, which reduces run‑out and wobble. With a fully hardened and ground finish, the arbor maintains concentricity over repeated mounting cycles, so operators benefit from consistently accurate hole positions and longer tool life. Robust design for workshop reliability and low maintenance Manufactured for daily workshop use, the arbor’s hardened and ground surfaces resist wear and minimise fretting between taper faces. This construction improves repeatability and lowers the need for frequent re‑setting or adjustment. The compact 90 mm overall length keeps the centre of mass close to the spindle, reducing overhang and vibration during drilling and light turning operations. Where dependable alignment matters, this component supports stable, efficient machining with minimal upkeep. Clear standards and simple compatibility checks Marked to the applicable standard (DIN 238), the arbor simplifies equipment matching: the MK1 external taper and B12 chuck mount form a direct, measurable specification for procurement and machine setup. For integrators and workshop managers, this removes ambiguity when specifying chucks or spindle adapters, enabling faster purchasing decisions and fewer returns. If uncertainty remains about compatibility with a specific chuck or spindle, Metav’s advisers can supply the necessary fit data and confirm suitability for the intended machine. For precise chuck mounting and reliable workshop operation, contact Metav Werkzeuge for technical advice and to secure the TECWERK MK1 x B12 taper arbor for immediate supply. Technical data Article number: 2000832312NW Designation: Taper arbor MK1 x B12, hardened and ground, overall length 90 mm Manufacturer: TECWERK Facts Overall length: 90 mm Standard: DIN 238 Taper: MK1 Chuck mount: B12 Special features Drill‑chuck taper to DIN 238 Fully hardened and ground surfaces Intended for mounting drill chucks on drill and turning machines FAQ Is this arbor compatible with standard drill chucks? The taper arbor is manufactured to DIN 238 and accepts chucks with a B12 drill‑chuck taper, so it is compatible with standard B12 chucks when the machine spindle provides an MK1 external taper. What does the hardened and ground finish mean for workshop use? The hardened and ground finish on the arbor improves wear resistance and keeps the seating surfaces stable, which in turn reduces run‑out and extends the service life of both the arbor and the mounted chuck. Can the arbor be used on lathes as well as pillar drills? Yes. The arbor is intended for the mounting of drill chucks on both drill and turning machine spindles when the spindle taper is MK1 and the chuck uses a B12 mount. How should the taper arbor be maintained to preserve accuracy? Keep the taper faces clean and free from chips or coolant residue; periodic inspection and light cleaning before mounting helps preserve concentricity. The hardened and ground surface reduces servicing frequency compared with untreated components. Which SKU identifies this product for ordering? The product is listed under SKU 2000832312NW and supplied under the TECWERK designation for a taper arbor MK1 x B12, overall length 90 mm. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
97mm Morse Taper MT1 To B16 Taper Shank, Hardened And Ground, DIN 238 - TECWERK
Benefit from the combination of DIN 238 compatibility, fully hardened and ground construction and an industry-standard MT1–B16 interface for reliable chuck mounting and long service life. Order the taper arbor directly via Metav Werkzeuge or consult our advisors for technical guidance. Taper arbor MT1×B16 (DIN 238) — hardened & ground — TECWERK Taper arbor MT1×B16 (hardened and ground) by TECWERK is a precision part for mounting drill chucks on drilling and turning machines, engineered for consistent concentricity and workshop durability DIN 238 drill‑chuck taper Fully hardened and ground MT1 to B16 interface Long-lasting precision for daily workshop use The fully hardened and ground construction delivers a high level of dimensional stability and wear resistance, making the component suitable for continuous use in metalworking environments. Thanks to the optimised surface finish and heat treatment, the arbor maintains concentricity over prolonged periods, reducing the risk of unexpected runout and improving hole quality. This focus on mechanical integrity translates into fewer rework cycles and steadier production output. Standardised mounting for wide compatibility Compliant with DIN 238, the arbor fits drill‑chuck tapers and allows secure seating of Jacobs‑type chucks via the B16 reception while accepting an Morse taper MT1 spindle. The standard interface simplifies tool logistics by enabling the use of conventional chucks between bench drills and lathes without adapters. For workshops that rely on quick chuck changes, the standardised connection streamlines setup times and supports consistent machining results. Practical workshop benefits and simple upkeep The compact overall length of 97 mm and robust design make the MT1×B16 taper arbor a low‑maintenance solution: routine checks for seating and cleanliness are typically sufficient to preserve precision. The hardened and ground surfaces resist deformation under clamping loads, so the component keeps mechanical tolerances with minimal intervention. When periodic inspections are carried out, focus on seating condition and runout to ensure ongoing performance. For secure, standard‑compliant chuck mounting and reliable workshop performance, contact Metav Werkzeuge for availability and technical advice on the TECWERK MT1×B16 taper arbor Technical data Article number: 2000832316NW Manufacturer: TECWERK Product type: Taper arbor Standard: DIN 238 Facts Overall length: 97 mm External taper: MK1 (Morse taper MT1) Chuck reception: B16 Packaging unit: 1 Special features Fully hardened and ground For mounting drill chucks on drilling and turning machines Drill‑chuck taper compatible with DIN 238 FAQ What standard does this taper arbor comply with? The taper arbor complies with DIN 238, ensuring compatibility with standard drill‑chuck tapers and established workshop practices. Which tapers are involved in the interface? The part features an external MK1 (Morse taper MT1) and a B16 reception for drill chucks, providing a direct connection between spindle and chuck. Is the arbor suitable for regular, industrial use? Yes; the TECWERK taper arbor is hardened and ground for durability and is designed for routine use on drilling and turning machines. How does the hardened and ground finish benefit machining? The heat‑treated and ground finish improves wear resistance and maintains concentricity, which reduces runout and supports consistent hole quality. What measurements should be checked during maintenance? During inspection, check seating surfaces and runout; ensuring clean, undamaged tapers keeps the arbor performing as intended. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com