100mm Centre Cone MK4 Taper 60° Sharp Tip, Housing Ø64mm, Max Workpiece 800kg - RÖHM
Benefit from a robust combination of a Morse taper MK4 shank, a 60° point angle and a 100 mm projection for secure centring of heavier workpieces; the 64 mm housing and 800 kg load rating deliver dependable support during machining. Order the centre cone directly via Metav Werkzeuge or consult our specialists for application advice. Zentrierkegel MK4 A.-L.100mm — Centre cone, MK4 Morse taper, 60° point angle (RÖHM) The Zentrierkegel MK4 A.-L.100mm is a Morse-taper centre cone designed for precise support and rotation of medium to heavy workpieces in turning and inspection applications Morse taper MK4 shank 60° precision point angle 100 mm projection for deep centres Supports up to 800 kg workpieces Stable support for heavier turning operations A centre cone with a Morse taper MK4 shank provides a secure seating in the spindle or tailstock, reducing axial play and improving concentricity during turning. The 100 mm projection permits access to recessed centres while the 64 mm housing diameter increases the bearing surface, resulting in more consistent rotation under load. With a specified 800 kg maximum workpiece rating, this component is suitable where robust, repeatable centring is essential; the clear numeric limits simplify risk assessment and setup planning for production and workshop tasks. Precision geometry that improves concentricity and inspection The 60° point angle is a standard geometry for centring cones, offering a well-defined contact zone that balances penetration and support. A sharper or flatter angle would change seating behaviour; the 60° form concentrates load at a predictable apex, which helps to reduce runout and improves repeatability in measurement and machining processes. For operations requiring close tolerance alignment, the precise apex profile and slim pointed form contribute to stable datum formation and easier subsequent machining or metrology tasks. Workshop-ready design for reliable daily use Constructed for mechanical compatibility and straightforward mounting, the taper shank format ensures rapid fitting and removal without special adapters. The combination of a standard Morse taper and a compact housing results in a component that works with common centres and tailstocks while offering the mechanical strength to handle heavier assemblies. Regular inspection of the contact surfaces and correct seating are sufficient to maintain service life; the uncomplicated design keeps maintenance minimal while delivering dependable centring under continuous workshop conditions. For genuine RÖHM centring components and application guidance, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com or phone +49 2822 7131930 — our specialists will recommend the right configuration for the task. Technical data Article number: 4000832106NW Designation: Centre cone (Zentrierkegel MK4 A.-L.100mm) Manufacturer: RÖHM Packaging unit: 1 Facts Projection: 100 mm Point angle: 60° Housing diameter: 64 mm Max. workpiece weight: 800 kg Taper shank: MK4 Special features Pointed slim cone profile (spitz) Morse taper MK4 shank for secure seating Suitable for centring and turning applications Clear numeric load rating for workshop planning FAQ Is the taper compatible with standard Morse taper sockets? The centre cone uses a Morse taper MK4 shank and is compatible with standard MT4 sockets, ensuring straightforward fitting in widely used spindles and tailstocks. What is the maximum workpiece weight for safe use? The specification states a maximum workpiece weight of 800 kg for this RÖHM centre cone (SKU 4000832106NW), which serves as the design limit for stable centring in normal machining conditions. How does the 60° point angle affect centring performance? A 60° point angle provides a predictable contact apex that improves concentricity and repeatability, helping to reduce runout during turning and facilitating accurate inspection set-ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
115.5mm Live Centre MK5 Conical Tip 60° Angle, 78mm Body Diameter - RÖHM
Take advantage of a robust MK5 taper and a 115.5 mm overhang to achieve fast, repeatable centring of heavy components while keeping setup times low; order the RÖHM centring cone directly via Metav Werkzeuge or ask the consultants if needed. RÖHM Centring Cone MK5 — 115.5 mm overhang, 60° cone angle The RÖHM Centring Cone MK5 is a precision clamping accessory for aligning heavy workpieces on lathes and machining centres, designed to ensure reliable axial location and stable support during turning operations MK5 taper for standard spindle interfaces 115.5 mm overhang for deep centring tasks 60° pointed cone for precise axial alignment Rated for workpieces up to 1,600 kg Faster setup and consistent axial alignment for machining centres The engineered geometry of the centring tool reduces repositioning and trial cuts, enabling more efficient cycles. With a defined 60° cone angle and a pointed form, the component creates a repeatable contact point that converts radial play into a single, predictable datum. The MK5 taper secures the tool into the spindle with standardised fit, so the combination of MK5 and the 115.5 mm overhang provides a dependable balance between reach and rigidity. This results in measurable time savings on medium and heavy turning tasks while maintaining dimensional control. Robust contact surface for heavy-duty turning and stability Built to take substantial loads, the centring cone supports a maximum workpiece mass of 1,600 kg, which allows its use with large chucks and heavy assemblies. The broad housing with a 78 mm diameter distributes reaction forces and reduces local stress on the spindle nose, improving runout behaviour during contact. Thanks to the pointed cone geometry, axial alignment is achieved with minimal radial offset, improving concentricity and contributing to consistent finishing without repeated adjustments. Reduced rework through defined taper and repeatability The standardised MK5 taper guarantees a tight mechanical interface that resists micro-movement under cutting forces, lowering the likelihood of chatter and surface defects. The precise cone angle and hard seating mean that once the component is located, positional drift is limited; this reliability translates directly into fewer scrapped parts and less rework. For workshop planners, the clear specification of taper, overhang and cone angle simplifies fixture selection and process documentation. Practical considerations: integration, inspection and handling Integration into an existing toolset is straightforward owing to the industry-standard taper and compact housing. Routine inspection focuses on the cone tip and taper seating for wear or burrs; addressing minor damage early maintains the precision of axial location. The simple mechanical design minimises service complexity—when inspections indicate wear beyond allowable tolerance, replacement restores original performance quickly. Packing and transport information note the item is supplied as a single unit for controlled inventory and traceable fitting. For precision centring tasks with demanding loads, choose the RÖHM centring cone MK5 and contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number (SKU): 4000832107NW Product type: Centring cone Brand: RÖHM Facts Overhang: 115.5 mm Cone angle: 60° Housing diameter: 78 mm Max. workpiece weight: 1,600 kg Special features Taper design: MK5 Pointed cone form for axial centring Packaging unit: 1 FAQ What spindle interfaces is this centring cone compatible with? The RÖHM centring cone MK5 (SKU 4000832107NW) fits standard MK5 spindles and is intended for machines accepting that taper class. How heavy a workpiece can be centred with this tool? The centring cone is specified for workpieces up to 1,600 kg, offering a stable solution for heavy-duty turning operations. Is the cone geometry suitable for high-precision finishing? Yes, the 60° pointed cone profile provides a consistent axial datum, supporting high repeatability and improved concentricity in finishing passes. What inspections are recommended to maintain centring accuracy? Regular visual and tactile checks of the cone tip and MK5 seating are recommended; any detectable deformation or burrs should prompt repair or replacement to preserve precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
79mm Centre Cone MK3 Taper 60° Sharp Tip, Housing Ø56mm, Max Workpiece 400kg - RÖHM
Take advantage of precise centring with a robust rotating design: the combination of an MK3 shank, 60° cone angle and a 79 mm projection delivers reliable alignment and reduced setup time for turning operations; order the centring cone directly via Metav Werkzeuge or consult our specialists for selection and delivery. RÖHM centring cone MK3, projection 79 mm — rotating pointed form, 60° cone angle A RÖHM centring cone MK3 engineered for precise workpiece alignment in lathe and turning-centre applications, featuring a pointed rotating form and a 60° cone angle for secure, repeatable centring. MK3 shank for standard Morse taper fittings 60° pointed cone for secure centring 79 mm projection for deep workpiece reach Supports workpieces up to 400 kg Accurate centring that reduces rework and increases throughput The rotating pointed form with a 60° cone angle provides a consistent contact geometry that minimises runout and improves concentricity. Fitted with an MK3 shank (Morse taper 3), this centring solution is suitable for standard toolholders and tailstocks, enabling quick integration into existing setups. The precision of the contact surface reduces the need for repeated alignment checks, which in turn shortens setup times and supports higher manufacturing throughput without compromising component quality. Robust support for heavy and extended components A solid housing with a 56 mm diameter and a projection of 79 mm extends reach into deeper workpieces while maintaining stability. The centring cone is specified to support workpieces up to 400 kg, making it appropriate for medium to heavy turning tasks where reliable load capacity is essential. The mechanical design focuses on rigidity and load distribution, so fixtures remain secure during machining and the risk of deflection under load is reduced. Compatibility, integration and low maintenance handling Designed to fit common Morse taper systems, the device offers straightforward integration with standard lathes and turning centres; the MK3 interface enables interchangeability with existing tooling. The rotating centre form reduces frictional heating at the contact point and minimises marking on softer materials, helping to preserve surface finish. Routine maintenance is limited to periodic inspection and lubrication of bearings where applicable, ensuring long service intervals and stable performance in production environments. Contact Metav Werkzeuge to secure expert advice on selecting the right RÖHM centring cone MK3 for specific turning applications and to arrange fast delivery from Emmerich. Technical Data Article number: 4000832105NW Manufacturer: RÖHM Product type: Centring cone Packaging unit: 1 Facts Projection: 79 mm Cone angle: 60° Housing diameter: 56 mm Max. workpiece weight: 400 kg Special features MK3 shank (Morse taper 3) Rotating pointed form Suitable for lathe and turning-centre applications FAQ What taper does the centring cone use? The RÖHM centring cone uses an MK3 shank (Morse taper 3) for direct fitting into compatible tailstocks and toolholders (SKU 4000832105NW). Which cone angle is specified and why does it matter? A 60° cone angle is specified; this geometry provides a stable, well-centred contact surface that improves concentricity and reduces workpiece runout. How deep can the cone reach into a workpiece? The unit offers a 79 mm projection, which allows access to deeper bores and extended components while maintaining centring accuracy. What load can the centring cone support? The design supports workpieces up to 400 kg, suitable for medium to heavy turning operations where robust support is required. Is the centring cone compatible with standard lathes? Yes, the MK3 interface and rotating pointed form are compatible with standard lathe tailstocks and turning centres; the form also helps reduce marking on the workpiece surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com