30mm Morse Taper Sleeve MK2 For Steel Tool Holder With Ejector Screw - TECWERK
Take advantage of precise adaptation between Morse taper spindles and interchangeable holders: robust compatibility with steel holder head A, MK2 taper seating and a 30 mm bore ensure repeatable clamping and quick changeover. Order the TECWERK taper sleeve directly via Metav Werkzeuge or consult our advisors for application advice. Morse taper sleeve for steel holder head A, MK2, ø30 mm — TECWERK The Morse taper sleeve for steel holder head A serves as a compact adaptor to fit MK2 interchangeable holders with a cylindrical bore into standard Morse taper toolheads for reliable clamping in metalworking environments Fits MK2 shaft taper Compatible with steel holder head A 30 mm bore diameter Supplied with ejection screw Secure adaptation for interchangeable holders that reduces setup time The adaptor sleeve converts between taper systems to permit the use of interchangeable holders in spindles designed for Morse tapers. By providing a concentric, repeatable seating surface, the component reduces axial play and improves tool run-out, which directly benefits machining accuracy. The MK2 taper specification and the 30 mm internal diameter are engineered to deliver a tight fit for holders with a cylindrical bore, decreasing the need for frequent re-clamping and streamlining changeovers in workshop workflows. Faster removal and safe handling thanks to the ejection mechanism An integrated ejection screw simplifies removal of the sleeve from the toolhead without resorting to excessive force or improvised extraction methods. This controlled removal protects both the spindle and the adaptor from damage, shortening maintenance intervals. The mechanical aid supports safer, more predictable operations during routine tool changes and reduces mechanical shock to assemblies, contributing to longer service life for connected tool-holding components. Clear compatibility and installation guidance for the workshop Designed for use with steel holder head A and MK2 shaft systems, the adaptor is suitable where interchangeable holders with cylindrical bores are already employed. The straightforward geometry means installation and alignment can be performed with standard workshop tooling; no special fixtures are required. For procurement and inventory purposes the sleeve is supplied as a single unit, making stock management and replacement planning simple for production teams and service departments. Robust choice for consistent clamping in mixed setups Manufactured under the TECWERK designation, the sleeve functions as a practical solution for shops aiming to unify tool-holding across machines with differing taper standards. The component emphasises functional reliability and repeatability rather than decorative finish; the result is dependable performance in daily machining tasks and reduced downtime from misfitted holders. For operations valuing predictable process quality, this adaptor supports consistent machining results across batches. For precise adaptation of MK2 holders to Morse taper toolheads, contact Metav Werkzeuge to arrange supply of the TECWERK Morse taper sleeve and benefit from direct assistance from our Emmerich team; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832176NW Label: Morsekonushülse f.Stahlhalterkopf A f.Wechselhalter MK2 AD 30mm TECWERK Manufacturer: TECWERK Core specifications Shaft version: MK2 Bore diameter: 30 mm Special features Suitable for: steel holder head A For interchangeable holders with cylindrical bore Includes ejection screw Packaging unit: 1 UID: 2000832176NW FAQ Is this adaptor compatible with MK2 toolholders? The Morse taper sleeve is specified for MK2 shaft versions and is designed to accept interchangeable holders with a cylindrical 30 mm bore, ensuring compatibility with MK2 toolholders. Can the sleeve be used with a steel holder head A? Yes, the component is intended for use with steel holder head A and provides a secure seating for such assemblies in Morse taper spindles. How is the sleeve removed from the spindle after use? Removal is facilitated by the supplied ejection screw; this allows safe and controlled extraction of the sleeve from the toolhead without impact on the spindle. Is the adaptor supplied as a single item or in sets? The product is supplied as a single unit (packaging unit 1) and is listed under SKU 2000832176NW for straightforward reordering. Does the TECWERK sleeve improve repeatability in tool clamping? By providing a concentric seating surface for interchangeable holders, the sleeve improves repeatability and reduces run-out, supporting more consistent machining tolerances. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
40mm Morse Taper Sleeve For C Toolholder With Ejector Screw, MK4 - TECWERK
Take advantage of a precise, space-saving adapter that combines an MK4 shank and a secure 40 mm seating for quick-change tool holders; the integrated ejector screw speeds up tool swaps while maintaining repeatable concentricity. Order the adapter directly via Metav Werkzeuge or request tailored advice from our consultants. Morse taper sleeve MK4 · 40 mm – TECWERK tool adapter A Morse taper sleeve designed for the steel holder head C, enabling secure mounting of interchangeable tool holders with a 40 mm outer diameter for efficient workshop workflows MK4 shank for standard taper spindles Integrated ejector screw for fast tool release Compatible with interchangeable holders with cylindrical bore Fits steel holder head C Fast, reliable clamping with repeatable concentricity The adapter delivers a compact solution for converting an MK4 taper into a receptacle for quick-change tool holders. Thanks to the precise taper geometry and the MK4 configuration, the sleeve ensures secure clamping and a high degree of concentricity between spindle and tool. This reduces run-out and helps maintain cutting accuracy across repetitive cycles, making the component a practical choice where consistent machining quality is required. Reduced downtime through quick-change capability Fitted with an ejector screw, the sleeve allows rapid removal of the holder without the need for additional tools, shortening changeover times and improving productivity on the shop floor. The design supports holders with a cylindrical bore, so the adapter serves as a simple but effective interface that minimises handling and streamlines tool management during batch production or mixed-operation setups. Practical compatibility for common toolholder systems Engineered for use with the steel holder head C, the taper sleeve covers a typical application range in clamping technology and toolholding systems. Its 40 mm seating dimension provides a standard connection point for many quick-change holders, reducing the need for bespoke adapters and supporting a modular tooling strategy that keeps inventory lean and versatile. Installation guidance and suitability checks Although the sleeve is straightforward to fit, correct seating and alignment are essential for optimal performance. The component is intended for holders with a cylindrical bore and a matching 40 mm interface; the ejector screw must be tightened to the recommended torque and checked for free operation. For customers seeking confirmation of fit with specific holders or machines, technical guidance is available to verify compatibility and installation best practice. Contact Metav Werkzeuge for a compatibility check or a personalised recommendation — phone +49 2822 7131930 or email info@metav-werkzeuge.com — and benefit from Metav’s extensive range and workshop expertise Technical data SKU: 2000832180NW Product: Morse taper sleeve Brand: TECWERK Suitable for: Steel holder head C Shank design: MK4 Facts Diameter: 40 mm Packaging unit: 1 UID: 2000832180NW Special features For interchangeable holders with cylindrical bore With ejector screw Suitable for quick-change holders Fits steel holder head C FAQ What is the primary use of this taper sleeve? The taper sleeve is intended to adapt an MK4 taper to accept quick-change holders, providing a secure interface for machining operations with the TECWERK accessory (SKU 2000832180NW). Does the sleeve work with steel holder head C? Yes, the Morse taper sleeve is designed specifically to fit the steel holder head C and to accept interchangeable holders with a 40 mm cylindrical seating. How does the ejector screw improve usability? The integrated ejector screw permits fast release of the holder from the sleeve, reducing manual effort and decreasing changeover times during production runs. Is a compatibility check recommended before installation? A compatibility and fit check is advisable; Metav Werkzeuge can provide guidance to confirm that the sleeve and holder combination matches the intended application. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Morse Taper Sleeve MK3 For Steel Toolholder B With Ejector Screw - TECWERK
Take advantage of a compact adapter that delivers reliable compatibility with MK3 tooling and a secure ejection mechanism for fast changeovers; order the component directly via Metav Werkzeuge or consult our specialists for matching holders and integration advice. Morse taper sleeve (MK3, 40 mm) by TECWERK A Morse taper sleeve (MK3, 40 mm) engineered to adapt interchangeable holders with a cylindrical bore for steel holder head B, featuring an integrated ejection screw for straightforward tool removal. Compatible with MK3 interchangeable holders 40 mm nominal diameter for stable fitting Integrated ejection screw for fast tool release Designed for steel holder head B compatibility Faster changeovers with modular tool systems The adapter provides a straightforward way to integrate existing modular tooling into a compact setup. By matching the MK3 shank form and the 40 mm seating, the sleeve reduces the need for multiple dedicated holders, which streamlines inventory and minimises machine downtime. The modular approach supports predictable setup times and improves throughput in mixed-production environments where flexibility is essential. Secure retention and simplified ejection for daily use Retention is ensured by the Morse taper principle, which creates a self-locking fit under load; the incorporated ejection screw enables safe and repeatable tool removal without hammering. This mechanical pairing reduces the risk of damage during changes and maintains concentricity between tool and spindle. For operations where frequent swaps are required, the combination of secure seating and controlled ejection translates into lower handling risk and better component life. Consistent machining quality through precise seating A correctly matched taper sleeve maintains concentricity and limits runout, which directly benefits surface finish and dimensional consistency when working on steel parts with a steel holder head. The adapter’s geometry supports stable clamping forces and reduces vibration, helping to protect cutting edges and achieve repeatable results. For less experienced operators, a reliable taper interface reduces variability in setup and supports predictable production outcomes. Practical workshop integration and parts management The adapter fits existing interchangeable holders with a cylindrical bore and is supplied as a single unit for straightforward stocking. The compact design simplifies storage and organisation in the toolroom. When specifying replacements or upgrades, the clear identification of shank type and nominal diameter makes procurement simpler and reduces the chance of ordering incompatible items, supporting a leaner supply chain. Contact Metav Werkzeuge for ordering advice and assistance matching the TECWERK Morse taper sleeve (MK3, 40 mm) to existing holders; Metav Werkzeuge can supply compatible components directly from their Emmerich warehouse and advise on workshop integration. Technical data Article number: 2000832177NW Type: Morse taper sleeve Brand: TECWERK Compatible with: Steel holder head B Packaging unit: 1 Facts Shank execution: MK3 Nominal diameter: 40 mm Bore diameter: 0 mm Special features For interchangeable holders with cylindrical bore With ejection screw Suitable for: interchangeable holder FAQ What holders is this taper sleeve compatible with? The sleeve is compatible with interchangeable holders that use a cylindrical bore and specifically fits steel holder head B; the MK3 shank form ensures correct seating. How does the ejection screw improve handling? The integrated ejection screw allows controlled separation of the sleeve from the holder, preventing impact damage and making tool changes quicker and safer when using the taper sleeve. Is this product suitable for high-precision tasks? Yes, the taper interface is designed to maintain concentricity and low runout, which supports consistent machining quality in precision work on steel using the MK3 adapter. Can the adapter be used with other shank standards? This sleeve is manufactured for the MK3 shank execution; different shank standards require corresponding adapters to guarantee correct fit and performance. What is the SKU for ordering or reference? Reference SKU 2000832177NW when enquiring about the TECWERK Morse taper sleeve to ensure correct identification of the MK3, 40 mm adapter. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Taper Sleeve MK4 For Toolholder With Ejector Screw, Cylindrical Shank - TECWERK
Take advantage of a compact conversion sleeve that combines reliable MT4 clamping with a 40 mm cylindrical bore and an integrated ejection screw for efficient tool changes. Order the sleeve directly via Metav Werkzeuge or ask our consultants for application advice. Morse taper sleeve for steel holder head B — MT4, 40 mm, TECWERK Morse taper sleeve for steel holder head B designed as a conversion sleeve for interchangeable holders with a 40 mm cylindrical bore; ideal for secure clamping in lathe and turning tool setups. MT4 Morse taper for reliable clamping 40 mm cylindrical bore for interchangeable holders Integrated ejection screw for fast removal Compatible with steel holder head B Secure connection for consistent machining A robust Morse taper interface provides a vibration-resistant seating that maintains concentricity during cutting operations. The MT4 specification ensures compatibility with standard Morse taper spindles and toolholders, while the 40 mm cylindrical bore adapts the holder to a wide range of interchangeable systems. This combination reduces runout and helps to keep cutting forces stable, which in turn improves surface finish and tool life. The design is particularly suited to production-focused workshops that require repeatable results without lengthy setup times. Faster tool changes and straightforward maintenance The sleeve features an ejection screw, allowing quick and safe removal from the holder without hammering or improvised tools. The presence of the ejection mechanism shortens changeover times and simplifies maintenance routines, supporting higher machine uptime. The conversion sleeve’s straightforward geometry makes inspection and cleaning uncomplicated; any routine check can be carried out with standard measuring gauges to verify taper seating and bore condition. These practical advantages translate into measurable productivity gains on the shop floor. Versatile retrofit for steel holder head B applications Engineered for use with steel holder head B, the conversion sleeve adapts existing holders to accept interchangeable tooling with a cylindrical bore. The adaptor function lets workshops standardise on a single spindle taper while keeping a variety of toolholders in service. Where tool flexibility and quick reconfiguration are priorities, the conversion sleeve acts as a compact and durable solution to expand capability without extensive retooling. Compatibility and ease of integration make it a pragmatic choice for both repair and upgrade scenarios. Contact Metav Werkzeuge for precise retrofit guidance on this TECWERK conversion sleeve — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific holder combinations Technical data Article number: 2000832178NW Label: Morse taper sleeve for steel holder head B MT4 AD 40mm TECWERK Brand: TECWERK Packaging unit: 1 Facts Shaft execution: MT4 Diameter (d): 40 mm Bore diameter: 0 mm Packaging unit: 1 Design and special features For interchangeable holders with cylindrical bore With ejection screw Compatible with interchangeable holder Suitable for steel holder head B Intended for MT4 taper FAQ What machines is this sleeve compatible with? The TECWERK Morse taper sleeve is designed for MT4 taper systems and for use with steel holder head B; compatibility depends on matching the machine spindle or holder taper to MT4. How does the ejection screw work and why is it useful? The integrated ejection screw enables safe removal of the sleeve from the holder without impact, facilitating faster tool changes and reducing wear on the taper seating. Can this sleeve adapt existing holders to cylindrical-bore interchangeable tooling? Yes, the conversion function allows interchangeable holders with a cylindrical bore to be used where an MT4 taper seating is required, supporting flexible tool setups. Is this product suitable for heavy-duty turning operations? The MT4 taper and solid design provide a reliable clamping interface for many turning tasks; assessment of specific cutting parameters and toolholder combinations is recommended. What is the article number for ordering or reference? The article number is 2000832178NW and should be quoted when enquiring about the TECWERK conversion sleeve. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50mm Morse Taper Sleeve MK4 For Steel Holder C With Ejection Screw - TECWERK
Take advantage of a robust, workshop-ready adapter that combines secure MK4 mounting, a 50 mm fit for cylindrical bores and a practical ejection screw to reduce changeover time. Order directly via Metav Werkzeuge or consult Metav’s technical advisors for fit confirmation and fast supply. TECWERK Morse taper sleeve – MK4 adapter with 50 mm bore and ejection screw The Morse taper sleeve is an MK4 taper adapter designed for steel holder head C and for use with changeable holders featuring a cylindrical bore. Adapter for MK4 shank, secure fit 50 mm diameter for cylindrical bores Integrated ejection screw for easy removal Compatible with steel holder head C Faster changeovers through precise taper adaptation The sleeve offers a clean mechanical solution for integrating modular changeable holders with existing toolholding systems. By adapting the MK4 taper to a cylindrical changeable-holder bore of 50 mm, the component reduces fixture modifications and shortens downtime. The hardened taper geometry ensures repeatable centring and precision seating, which translates into consistent run-out and improved part quality. This makes the adapter a rational choice where reliable alignment and swift tool swaps determine productivity. Secure retention and straightforward removal for workshop routines Retention is assisted by an integrated ejection screw, which enables controlled release without damaging the holder or fixture. The screw mechanism simplifies disassembly, lowering maintenance time and reducing the risk of seizing under heavy use. Where fixture accessibility is limited, the sleeve’s design supports dependable locking while permitting efficient removal—helping to avoid costly rework and to keep operations on schedule. Built for robust use in industrial environments Constructed for compatibility with steel holder head C and standard changeable holders, the adapter is intended for frequent handling and repetitive tool changes common in production workshops. The tailored interface to cylindrical bores protects mating surfaces and distributes contact forces to reduce wear. As a result, the sleeve contributes to longer service intervals for tooling assemblies and a lower total cost of ownership, while maintaining the mechanical integrity required for demanding machining tasks. For reliable compatibility checks and swift procurement, contact Metav Werkzeuge to confirm fit for existing MK4 tooling and secure the TECWERK Morse taper sleeve (SKU 2000832181NW) for the workshop supply chain. Technical data Article number: 2000832181NW Product: Morse taper sleeve Brand: TECWERK Shank execution: MK4 Facts Diameter: 50 mm Packaging unit: 1 Special features For changeable holders with cylindrical bore With ejection screw Suitable for changeable holders Suitable for steel holder head C FAQ What type of shank does the sleeve accept? The sleeve is designed for an MK4 shank and provides a secure, repeatable interface for MK4 toolholders. Which bore size is required for the holder? The adapter is made for a 50 mm cylindrical bore, matching changeable holders intended for that diameter. Is an ejection mechanism included? Yes, the sleeve features an integrated ejection screw to facilitate safe and simple removal of the holder. Can this sleeve be used with a steel holder head C? Compatibility with steel holder head C is stated; the sleeve is intended to pair with that holder type for robust clamping. Which SKU should be quoted when ordering or enquiring? Please reference SKU 2000832181NW when enquiring about the TECWERK Morse taper sleeve to ensure accurate identification. Manufacturer/Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com